B Council Regulation
02013R1387 — EN — 01.01.2018 — 008.001 — 1
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
►B COUNCIL REGULATION (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201)
Amended by:
Official Journal
No page date ►M1 Council Regulation (EU) No 722/2014 of 24 June 2014 L 192 9 1.7.2014 ►M2 Council Regulation (EU) No 1341/2014 of 15 December 2014 L 363 10 18.12.2014 ►M3 Council Regulation (EU) 2015/982 of 23 June 2015 L 159 5 25.6.2015 ►M4 Council Regulation (EU) 2015/2449 of 14 December 2015 L 345 11 30.12.2015 ►M5 Council Regulation (EU) 2016/1051 of 24 June 2016 L 173 5 30.6.2016 ►M6 Council Regulation (EU) 2016/2390 of 19 December 2016 L 360 14 30.12.2016 ►M7 Council Regulation (EU) 2017/1134 of 20 June 2017 L 164 6 27.6.2017 ►M8 Council Regulation (EU) 2017/2467 of 21 December 2017 L 351 7 30.12.2017
Corrected by:
►C1 Corrigendum, OJ L 293, 9.10.2014, p. 57 (1387/2013) ►C2 Corrigendum, OJ L 293, 9.10.2014, p. 58 (722/2014) 02013R1387 — EN — 01.01.2018 — 008.001 — 2
▼B COUNCIL REGULATION (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011
▼M3 Article 1
1. The autonomous Common Customs Tariff duties for the agricultural and industrial products listed in ►M4 the Annex ◄ are hereby suspended. 2. Paragraph 1 does not apply to any mixtures, preparations or products made up of different components containing products listed in ►M4 the Annex ◄. ▼B
Article 2
1. The Commission may at any time review the suspensions for the products listed in ►M4 the Annex ◄ in the following cases: (a) at its own initiative; (b) at the request of Member States. ▼M4 2. The Commission shall review the suspensions for products listed in the Annex during the year preceding the end date for mandatory review provided for in that Annex.
Article 3
Where a declaration for release for free circulation is presented for the products in relation to which the supplementary units have been provided in the Annex, the exact quantity of the products imported shall be entered in ‘Box 41: Supplementary units’ of that declaration using the measurement unit set out in the Annex. ▼B
Article 4
Regulation (EU) No 1344/2011 is hereby repealed.
Article 5
This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union. It shall apply from 1 January 2014. This Regulation shall be binding in its entirety and directly applicable in all Member States. 02013R1387 — EN — 01.01.2018 — 008.001 — 3
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2018 31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 )
2 Leuco
) ( ,
1 , frozen, of a , frozen, of Lepista , 0 % 0
)
2 Clitocybe ) (
,
1
Hortense axiphium Calocybe , dried, whole or in identifiable slices in identifiable , dried, whole or , ANNEX , provisionally preserved in brine, in in brine, , provisionally preserved
)
, fresh, for use in the manufacture (excluding manufacture in the use for , fresh,
2 0 % 0 Agaricus Agaricus
) of the variety
2 Tricholoma and Pisum sativum , uncooked or cooked by steaming or boiling frozen, not in water, Vaccinium macrocarpon Lyophyllum , Vaccinium
)
2
)
2 Leucopaxillus , ) (
1 thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared of pods, manufacture the in to be used, in their mm, than 6 of not more thickness meals ( agaricus immediate for state solutions, but unsuitable in that preservative in other or sulphur water, ( industry food-canning the consumption, for genus the mushrooms of Mushrooms, excluding ( food industries ( packing) of products of drink or food industries or pieces, for treatment other than simple repacking for retail sale ( other than sale or pieces, for treatment simple repacking for retail containing added other sweetening matter sugar or Description Fresh or chilled chanterelles for treatment other than simple repacking for retail sale ( sale retail for repacking simple than other treatment sale for retail species chanterelles for the chilled up of or put pods, genera Fresh not in the Peas frozen, of shoots, mushrooms Bamboo excluding Mushrooms, species the genus of products (excluding packing) of of drink or manufacture use in the or dried, for fresh Dates, the Cranberries of Fruit sale retail put up for not added sugar, not containing frozen, Boysenberries, 10 10 31 70 10 10 50 11 30 10 20 TARIC 0811 90 50 0811 90 70 0811 90 CN code ex 0712 32 00 ex 0712 33 00 ex 0709 59 10 ex 0710 21 00 ex 0710 80 95 ex 0711 59 00 ex 0712 39 00 ex 0804 10 00 ex 0810 40 50 ex 0811 90 95 ex 0811 90 95
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 4
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2019 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2 0 % 0
), in pieces, frozen Ananas comosus cosmetics, washing products, products or pharmaceutical products, pharmaceutical washing products or sugar or other sweetening matter of: the manufacture oil, for palm kernel oil, oil, coconut (copra) Palm 10, 19 3823 subheading of acids fatty monocarboxylic — industrial — of heading acids 2915 of fatty 2916, methyl esters or — fatty alcohols of subheadings 2905 17, 19 2905 and 3823 70 used for the manufacture of — 16, pure or mixed, of cosmetics, used the manufacture for alcohols of subheading fatty 2905 00, 11 3823 subheading of acid — stearic or 3401, heading of — goods ( — acids with high purity of heading fatty 2915 or 3823 heading of acid linoleic — conjugated ( — acid of heading 2916 of linoleic or methyl esters ethyl- process subjected to any texturisation hidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid but than 50 % or more not more or 35 hidonic acid Description Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added containing not frozen, water, in boiling or steaming by cooked ( or Pineapple uncooked of Rose-hips, manufacture the in use for 8001-23-8) RN (CAS oil safflower Refined of arac % than 50 but not more more % or containing by weight 35 refined, oil, Vegetable and not modification chemical without any further hydrogenated and interesterified, Jojoba oil, 20 20 20 20 20 20 30 40 10 92 20 TARIC
CN code ex 0811 90 95 ex 0811 90 95 ex 1512 19 10 ex 1515 90 99 ex 1516 20 96 *ex 1511 90 19 *ex 1511 90 91 *ex 1513 11 10 *ex 1513 19 30 *ex 1513 21 10 *ex 1513 29 30 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 5
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2022 Supplementary unit — )
— — — —
3
duty 0 % 0 % 0 % 0 % 6 % ( 6 % Rate of autonomous
(L.) Wilczek), not put up Wilczek), (L.)
)
2 Vigna radiata
spp., Mangifera
non-hydrogenated sunflower oil, non-hydrogenated sunflower acid or 12 acid but than % or more not more 65 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO) Preparation in powder form containing by weight: % of wheat derived Maltodextrin, — more but not than 35 % or more 15 serum), % of whey — (milk more but not than 35 % or more 15 bleached, deodorised and of refined, % than 30 but not more or more % 10 — % of blended, — aged spray dried cheese, more but not than 30 % or more 10 and buttermilk % of — % or more but not than 15 5 — acid disodium than 10 of sodium phosphate, 0,1 but not more caseinate, % % or more lactic Transparent noodles, cut in pieces, obtained from beans ( sale for retail 5 kg by cooking: obtained concentrate, Mango puree Genus the — of % 30 than more not of weight by content sugar a — with ( of products of food use in the manufacture and drink industry for Description arachidonic % than 50 more but not % or containing by weight 25 refined, oil, Vegetable Bamboo packings shoots, than in of a net content more immediate prepared or preserved, 39 10 83 93 45 20 10 10 10 TARIC
CN code ex 1901 90 99 ex 1902 30 10 ex 1517 90 99 ex 2106 90 98 ex 1903 00 ex 2005 91 00 *ex 2007 99 50 *ex 2007 99 50 *ex 2007 99 93 ______
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 6
Date foreseen for mandatory review
31.12.2022 31.12.2022 31.12.2022 31.12.2020 31.12.2019 Supplementary unit —
) —
3 )
— — —
3
duty 0 % 6 % 6 % ( 6 % 7,8 % ( 7,8 % Rate of autonomous 0 % 0
) )
2 2
)
2
)
4 , spp., spp., Carica Psidium Mangifera Papaya puree concentrate, obtained by Papaya puree concentrate, cooking: Genus the — of % — % but not than 30 more with a sugar content by weight of more than 13 ( of products of food use in the manufacture and drink industry for obtained by cooking: concentrate, Guava puree Genus the — of % — % but not than 30 more with a sugar content by weight of more than 13 ( of products of food use in the manufacture and drink industry for ( industries food processing products of concentrate, from — not genus the — of — of a Brix value 14 or more, but than not more 20 ( of products of drink industry used in the manufacture or not containing added sugar whether not containing added spirit, boysenberry puree Seedless Description Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of manufacture the for processing, as alone packing excluding cranberries, dried Sweetened puree: Mango 84 85 30 94 95 40 20 94 TARIC CN code ex 2008 99 49 ex 2008 99 48 ex 2008 99 *ex 2007 99 50 *ex 2007 99 50 *ex 2007 99 50 *ex 2007 99 50 *ex 2008 93 91 ______
M6 M8 M8 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 7
Date foreseen for mandatory review
31.12.2022 31.12.2020 31.12.2020 31.12.2019 31.12.2019 Supplementary unit — )
— — — —
3
duty 0 % 8 % 0 % 0 % 0 % ( 0 % Rate of autonomous ) peeled, washed, blanched,
)
2
)
2
)
2
, in brine, containing by weight: Eleocharis tuberosa
or )
2
) (
1 Karakishmish Eleocharis dulcis , Ananas STAN 192-1995 Blanched vine leaves of the genus the of leaves Blanched vine — concentration, % of salt more than 6 — acid monohydrate and acidity expressed as citric 0,1 % or more but not than 1,4 of 000 mg/kg of sodium according CODEX benzoate than 2 whether or not but more — ( for use in the manufacture of stuffed vine leaves with rice of products and of food individually for use in the manufacture chilled industry quick-frozen for ( treatment other than simple repacking Pineapple juice: concentrate, from — not genus the — of — of a Brix value 11 or more but not than 16, ( of products of drink industry used in the manufacture — than 20 with a Brix value of more but not more than 67, — weight, kg net 100 than EUR 30 per more value of a sugar added — containing ( of products of food drink industry used in the manufacture or — of a Brix value 40 or more but not than 66, — or more packings of a content 50 in immediate litres Description ( chestnuts water form: Chinese powder in than other juice, Pineapple concentrate: juice Cranberry 70 20 11 70 20 91 10
TARIC CN code ex 2009 41 92 ex 2008 99 91 ex 2009 41 99 ex 2009 49 30 ex 2009 81 31 *ex 2008 99 49 *ex 2008 99
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 8
Date foreseen for mandatory review
31.12.2019 31.12.2021 31.12.2018 31.12.2021 31.12.2019 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) )
2 2
, Euterpe oleracea Passion fruit juice and passion fruit juice concentrate, whether or not frozen: or whether concentrate, juice and passion fruit juice Passion fruit — with a Brix value of 13,7 but or more not more than 55, — kg net weight, than EUR of a value more 30 per 100 — or more, and packings of a content 50 in immediate litres sugar added — with ( of products food the use in manufacture or drink industry for or more packings of a content 50 immediate litres — than 48 with a Brix value of more but not more than 67, — or more packings of a content 50 in immediate litres species the — of — frozen, sweetened, — not form, powder in — not — of a Brix value 23 or more but not than 32, kg or more packings a content of 10 of in immediate not frozen: or whether concentrate, juice and passion fruit juice Passion fruit — with a Brix value of 10 or more but not than 13,7, — kg net weight, than EUR of a value more 30 per 100 — or more, and packings of a content 50 in immediate litres sugar added — without ( of products food the use in manufacture or drink industry for Description concentrate: juice acerola concentrate: with a Brix value of 61 or more, but not more than 67, boysenberry concentrate Frozen in juice Frozen juice berry Acai 11 21 13 29 20 30 85 TARIC CN code ex 2009 89 73 ex 2009 89 97 ex 2009 89 73 ex 2009 89 79 ex 2009 89 79 ex 2009 89 79 ex 2009 89 97
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 9
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2018 31.12.2021 31.12.2022 31.12.2021 31.12.2019 Supplementary unit — — — — — — kg
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
1 0 % 0
2 000 Da — unfermented, and sugar, or spirit added containing — not ( — or more packing of a content 20 in immediate litres % in powder or textured form % or more but not than 90 65 phosphate % of calcium than 8,6 more extract, % licorice — % but not than 35 more more than 30 % tricaprylin, — % but not than 70 more more than 65 standardised by weight to 3 % or more but not more than 4 % glabridin amino acids, and % free — but % or more not more than 70 by weight 20 — % having than weight of not more a molecular peptones of which by than 90 weight more Mixture of xylenol-isomers and ethyl phenol-isomers, with xylenol a total content by weight of % than 95 % or more but less 62 Description Coconut water Coconut weight: of weight basis, dry on a by weight, calculated content protein having a concentrate protein Soya by containing but not more or % by weight 6,6 containing isolate, protein soya of base on the Preparation Preparation of: consisting hydrolysate protein Casein % or more Fused magnesia with a purity by weight of 94 20 10 96 20 30 45 50 10 TARIC CN code ex 2707 50 00 ex 2009 89 99 ex 2106 10 20 ex 2106 10 20 ex 2106 90 92 ex 2519 90 10 ex 2707 99 80 *ex 2106 90 92
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 10
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2020 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
/s, or
2 /s with a viscosity index of 120 or more
2
)
2
of 18 but not than 50; or more more and refinery feedstock to undergo one of the specific processes described in Additional note 5 to ( Chapter 27 Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydro carbons, containing: — more by % or and weight of saturates, 90 — % by weight of sulphur, not more than 0,03 with a viscosity index of 80 or more paraffin conversion process (HPC), containing: sulphur of mg/kg 1 than more — not — hydrocarbons % by weight of saturated more than 99 — hydrocarbons with a carbon chain length % by and than 75 weight of n- more iso-paraffinic mm 6,5 than more of °C 40 at viscosity kinematic — a analysis by ICP measured impurities %, based on metallic 99,999 — a kinematic viscosity at 40 °C of more than 11 mm 11 than more of °C 40 at viscosity kinematic — a Description Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as use for content, non-aromatic their exceeds content aromatic heavy whose a oils, by followed medium hydrocarbons, and gaseous Heavy from synthesised oil, base de-waxed Catalytic (CAS Tellurium RN 13494-80-9) of a purity by weight of 99,99 % or more, but not more than Calcium with a purity of 98 % or more by weight, in powder form (CAS or wire RN 7440-70-2) 10 30 10 20 40 Phosphorus 10 TARIC
2804 70 00 2804 70 CN code ex 2710 19 81 ex 2707 99 ex 2710 19 99 ex 2710 19 99 ex 2805 12 00 *ex 2804 50 90 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 11
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2020 31.12.2018 31.12.2021 31.12.2018 31.12.2020 Supplementary unit — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0
)
2 0 % 0 0 % 0 m μ
m μ
0 % 0 0 % 0 m or more, but not more than 2,1 m or more, μ performance liquid chromatography columns (HPLC) and sample preparation cartridges ( performance liquid chromatography columns (HPLC) and sample preparation cartridges powder of form the — in — % or more of a purity by weight of 99,0 0,7 of size grain median a — with — of not more than 3 have a diameter % of the particles where 70 Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more scandium and of a purity by metals, yttrium, weight of 95 Rare-earth Description % or more (CAS RN metal 7439-93-2) Lithium of a purity by weight of 98,8 5329-14-6) RN 10034-85-2) % or more of cerium containing metals, by weight 47 and rare-earth Alloy of cerium other (CAS RN acid (CAS Sulphamidic iodide Hydrogen 60676-86-0), RN (CAS dioxide Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in of high the manufacture silicon Amorphous 20 10 10 20 10 15 TARIC
2805 30 20 2805 30 30 2805 30 2805 30 40 2805 30 CN code ex 2805 30 10 ex 2811 19 80 ex 2811 19 80 ex 2811 22 00 *ex 2811 22 00 *ex 2805 19 90 ______
M8 M6 M8 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 12
Date foreseen for mandatory review
31.12.2019 31.12.2022 31.12.2018 31.12.2022 31.12.2020 Supplementary unit — — — — —
duty 0 % 0 % Rate of autonomous
m, and μ 0 % 0 0 % 0 0 % 0 — with a particle size of not more than 20 than more not of size particle a — with — of a kind used in the production of polyethylene of aluminates earth rare the RN 12068-51-8) and (CAS aluminate 1344-28-1), magnesium yttrium, lanthanum, and neodymium, with a content by weight as (calculated oxides) of: — % of aluminium oxide, more, but less than 98,5 % or 94 of magnesium oxide, %) — % (± 1,5 2 oxide, of yttrium %) — % (± 0,6 1 and of lanthanum oxide %) or — 1,2 % (± 2 either of lanthanum oxide %) — and neodymium oxide, % (± 1,2 2 mm than 10 size of more the total weight having % of a particle with less than 50 Description Calcined amorphous silicon dioxide powder dioxide silicon amorphous RN Calcined 7446-07-3) (CAS RN oxide (CAS aluminium 7783-54-2) dioxide of RN Tellurium consisting (CAS 17194-00-2) structure, trifluoride RN crystalline Nitrogen (CAS micro hydroxide a Barium with corundum Sintered 60 10 10 10 20 TARIC
CN code ex 2811 22 00 ex 2812 90 00 ex 2818 10 91 *ex 2811 29 90 *ex 2816 40 00 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 13
Date foreseen for mandatory review
31.12.2019 31.12.2020 31.12.2018 31.12.2021 31.12.2022 31.12.2022 31.12.2021 31.12.2018 Supplementary unit — — — — — — — —
duty 0 % 0 % 0 % Rate of autonomous 0 % 0
m μ 0 % 0
) 0 % 0
2 /g
2
0 % 0 m) m or more but not more than 2,1 μ μ 0 % 0 m (± 1 m (± μ O-content by weight of not more than 0,06 % O-content by weight of not more than 0,06
2
— in the form of powder of form the — in — % or more with a purity by weight of 99,5 — with a decomposition point of 263o C or more 4 of size particle a — with Total-Na a — with — % or more, of a purity by weight of 99,9 0,7 of grain-size average an — with of chloride Description Activated alumina with a specific surface area of at least 350 m 350 least at of area surface specific 21645-51-2) a RN with (CAS alumina ( hydroxide Activated metallurgy Aluminium in use for 1308-38-9) RN (CAS 13463-67-7): trioxide Aluminium hydroxide of boehmite or pseudoboehmite oxide in the form (CAS RN 1318-23-6) RN Dichromium (CAS 5470-11-1) dioxide RN Titanium (CAS chloride Hydroxylammonium oxide than 0,03 % of copper and containing not more % or more by weight 78 or II) Copper (I 10 20 hydroxides 30 10 and 10 oxides 10 Vanadium 20 TARIC
2825 30 00 2825 30 CN code ex 2818 20 00 ex 2818 30 00 ex 2819 90 ex 2825 50 00 ex 2818 30 00 *ex 2825 10 00 *ex 2823 00 ______
M7 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 14
Date foreseen for mandatory review
31.12.2020 31.12.2022 31.12.2021 31.12.2021 31.12.2020 31.12.2018 31.12.2021 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2020 Supplementary unit — — — — — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
than 99 % than 99 weight Description Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm 100 than more not of size particle a with 1317-38-0), RN (CAS oxide 1314-23-4) (II) RN Copper 1313-27-5) (CAS RN dioxide 7782-91-4) (CAS Zirconium RN trioxide (CAS Molybdenum Acid Molybdic 10326-27-9) RN (CAS Tungsten % or more hexafluoride (CAS RN 7783-82-6) with a purity by 99,9 weight of 7681-82-5) oxide dihydrate Copper monochloride (CAS RN 7758-89-6) of a purity by weight of 96 % or more but not more RN dichloride chloride 10034-96-5) (CAS zirconium Barium % or more Antimony pentachloride (CAS RN 7647-18-9) purity by of a weight of 99 RN iodide Hydrated 14644-61-2) (CAS Sodium RN monohydrate (CAS sulphate on less of sodium the dry % or calculated containing Disodium by tetrasulphide, weight 38 sulphate Manganese Zirconium 30 10 10 20 10 10 20 40 10 10 10 20 30 TARIC
CN code ex 2825 50 00 ex 2825 70 00 ex 2825 70 00 ex 2826 19 90 ex 2827 39 85 ex 2827 39 85 ex 2827 39 85 ex 2827 49 90 ex 2827 60 00 ex 2830 10 00 ex 2833 29 80 ex 2833 29 80 *ex 2825 60 00 ______
M8 M6 M7 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 15
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2021 Supplementary unit — — — — — —
duty 0 % 0 % Rate of autonomous
0 % 0 0 % 0
0 % 0 0 % 0
indicated: — 2 mg/kg of arsenic, or more — 200 mg/kg or more of calcium, — 200 mg/kg or more of chlorides, iron, of more or mg/kg — 20 — 150 mg/kg or more of magnesium, metals, heavy of more or mg/kg — 20 — 300 mg/kg or more of potassium, — 300 mg/kg or more of sodium, — 200 mg/kg or more of sulphates, in the European according to the methods Pharmacopœia determined specified % or more 96 Description Sodium hypophosphite monohydrate (CAS RN 10039-56-2) RN (CAS monohydrate 7681-53-0) hypophosphite RN Sodium (CAS hypophosphite Sodium Lithium carbonate, containing one or at the concentrations more of the following impurities 13601-19-9) 544-92-3) RN RN (CAS (CAS cyanide (II) (CAS RN basic carbonate 57219-64-4 (IV) Zirconium or 37356-18-6) with a purity by weight of Copper hexacyanoferrate Tetrasodium 10 20 20 30 20 10 TARIC
CN code ex 2835 10 00 ex 2836 91 00 ex 2836 99 17 ex 2837 19 00 ex 2837 20 00 *ex 2835 10 00 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 16
Date foreseen for mandatory review
31.12.2022 31.12.2022 31.12.2018 31.12.2020 31.12.2022 31.12.2018 31.12.2019 31.12.2019 31.12.2021 31.12.2022 31.12.2022 Supplementary unit — — — — — — — — — — kg
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
12054-85-2) Description Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5) RN (CAS (II) hexacyanoferrate 13870-28-5) (III) RN iron (CAS 1344-95-2) Ammonium disilicate RN 12767-90-7) Disodium (CAS RN silicate (CAS 7778-50-9) Calcium borate RN Zinc (CAS 13106-76-8) dichromate RN 12207-64-6) Potassium (CAS RN tetraoxomolybdate(2-) (CAS 27546-07-2) Diammonium tridecaoxotetramolybdate(2-) 11120-25-5) RN Diammonium RN (CAS (CAS dimolybdate Hexaammonium heptamolybdate, anhydrous (CAS RN (CAS RN 12027-67-7) or as tetrahydrate paratungstate) 13769-43-2) Diammonium (ammonium RN wolframate (CAS Diammonium metavanadate Potassium 20 10 20 10 10 10 20 30 40 10 10 TARIC
CN code ex 2839 90 00 ex 2840 20 90 ex 2841 70 00 ex 2841 70 00 ex 2841 70 00 ex 2841 70 00 *ex 2837 20 00 *ex 2839 19 00 *ex 2841 50 00 *ex 2841 90 30 *ex 2841 80 00 ______
M8 M6 M8 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 17
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2018 31.12.2019 31.12.2021 31.12.2019 31.12.2018 31.12.2018 31.12.2021 31.12.2018 31.12.2021 31.12.2018 Supplementary unit — — — — — — — — — — — —
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0
)
)
2 Euratom 0 % 0 ) (CAS RN 7789-20-0) 0 % 0 0 % 0 0 % 0 Euratom 0 % 0
C)Carbon monoxide (CAS RN 1641-69-6) C)Carbon monoxide (CAS
13 for use in the manufacture of catalytic preparations ( for use in the preparations of manufacture catalytic 39-9) mixtures and solutions containing these products ( Description Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 % 59 least at of content cobalt a with 12190-79-3) RN (CAS oxide cobalt(III) Lithium powder zeolite powder beta zeolite oxide (CAS RN Potassium titanium 12056-51-8) powder with a purity of 99 in more form % or Synthetic chabasite Synthetic 13410-01-0) RN (CAS Aluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) selenate Sodium 14762-55-1) RN (CAS Helium-3 by % or more weight with oxygen-18 (CAS RN 14314-42-2) of 95 level enriched at a Water ( % by than weight with boron-10 boride enriched at a level of more 95 Iron (CAS RN 200513- Heavy water (deuterium oxide) ( 10 oxide) 20 10 20 (deuterium 40 water 10 Heavy 10 20 and compounds hydrogen deuterium; Deuterium in and compounds thereof; enriched thereof, 30 40 TARIC
2845 10 00 2845 10 10 2845 90 CN code ex 2841 90 85 ex 2842 10 00 ex 2842 10 00 ex 2842 90 10 ex 2845 90 ex 2845 90 ex 2845 90 ex 2845 90 ex 2842 10 00 *ex 2841 90 85 ______
M6 M7 M6 M8 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 18
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2022 31.12.2021 31.12.2022 Supplementary unit — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0
0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 Rare-earth concentrate containing by weight 60 concentrate more but not than 95 % or of rare-earth % Rare-earth % each of zirconium oxide, aluminium oxide or iron oxide, and oxides and not than 1 more or more by % weight having a loss on ignition of 5 Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of scandium or or yttrium of metals, Compounds, of rare-earth inorganic or organic, 00 10 of these metals, other than those of subheading 2846 Description Dicerium tricarbonate (CAS RN 537-01-9), whether or not hydrated not or whether hydrated 537-01-9), not RN or (CAS whether tricarbonate carbonate, Dicerium lanthanum Cerium 7803-62-5) RN 7784-42-1) (CAS RN Silane (CAS Arsine 7782-65-2) RN (CAS (CAS Titanium nitride RN 25583-20-4) size of not with a particle more than 250 nm tetrahydride 1590-87-0) Germanium RN (CAS Disilane 10 53 20 30 10 20 30 40 60 TARIC
2846 90 10 2846 90 20 2846 90 30 2846 90 2846 90 90 2846 90 CN code ex 2846 10 00 ex 3824 99 96 ex 2846 10 00 ex 2846 10 00 ex 2850 00 20 ex 2850 00 20 ex 2850 00 20 *ex 2850 00 20 *ex 2850 00 20 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 19
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2022 31.12.2020 31.12.2019 31.12.2019 Supplementary unit — — — — — — —
duty 0 % 0 % Rate of autonomous
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
not more than: not more — % of Sec-butyl bromide 0,25 — % of n-butyl bromide 0,06 — % of n-propyl bromide 0,06 following specification: (1,1,2,2-tetrafluoroethane), R134 of weight by ppm 600 than more — not (1,1,1-trifluoroethane), R143a of weight by ppm 5 than more — not (pentafluoroethane), R125 of weight by ppm 2 than more — not (1-chloro-1,2,2,2-tetrafluoroethane), R124 of weight by ppm 100 than more — not — R114 (1,2-dichlorotetrafluoroethane), of by weight 30 ppm than more not — R114a (1,1-Dichlorotetrafluoroethane), of by weight 50 ppm than more not (1-Chloro-2,2,2-Trifluoroethane), R133a of weight by ppm 250 than more — not Description 1-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity not less than 99,0 % and containing and % 99,0 than less not 26628-22-8) purity RN a (CAS 7803-51-2) with azide RN 78-77-3) Sodium (CAS RN Phosphine (CAS 1-Bromo-2-methylpropane 1119-51-3) the RN to (CAS conforming 5-Bromopent-1-ene production 354-33-6) grade RN pharmaceutical (CAS for Pentafluoroethane feedstock 1,1,1,2-Tetrafluoroethane 10 75-10-5) 20 10 RN (CAS 20 Difluoromethane 10 10 TARIC 2903 39 21 2903 39 CN code ex 2850 00 60 ex 2853 90 ex 2903 39 19 ex 2903 39 24 ex 2903 39 26 *ex 2903 39 19
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 20
Date foreseen for mandatory review
Supplementary unit
duty Rate of autonomous
Chloro-1,2-Difluoroethylene+3,3,3-Trifluoropropene), — not more than 2 ppm by weight of R22 (Chlorodifluoromethane), R22 of weight by ppm 2 than more — not (Chloropentafluoroethane), R115 of weight by ppm 2 than more — not (Dichlorodifluoromethane), R12 of weight by ppm 2 than more — not chloride), — R40 (Methyl of by weight 20 ppm than more not — R245cb (1,1,1,2,2-pentafluoropropane), of by weight 20 ppm than more not — R12B1 of (Chlorodifluorobromomethane), by weight 20 ppm than more not — R32 (Difluoromethane), of by weight 20 ppm than more not — R31 (Chlorofluoromethane), of by weight 15 ppm than more not — R152a (1,1-Difluoroethane), of by weight 10 ppm than more not — Fluoroethylene), 1131 (1-Chloro-2 of by weight 20 ppm than more not — 1122 (1-Chloro-2,2-Difluoroethylene), of by weight 20 ppm than more not (2,3,3,3-Tetrafluoropropene), 1234yf of weight by ppm 3 than more — not Trifluoropropene), (3,3,3 1243zf of weight by ppm 3 than more — not (1-chloro-1,2-difluoroethylene), 1122a of weight by ppm 3 than more — not +1- (2,3,3,3-tetrafluoropropene, 1234yf+1122a+1243zf of weight by ppm 4,5 than more — not chemical, unspecified/unknown individual any of weight by ppm 3 than more — not combined, — unspecified/unknown chemicals all of by weight 10 ppm than more not — Water, of by weight 10 ppm than more not weight, by ppm 0,1 than more not of level acidity an — with Halides, — without — % by volume of High Boilers, not more than 0,01 malodour) (no odour any — without Description TARIC CN code
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 21
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2022 31.12.2018 31.12.2021 31.12.2018 31.12.2021 31.12.2022 31.12.2020 31.12.2018 Supplementary unit — — — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 -1,3,3,3-tetrafluoropropene) (CAS RN 29118-24-9) 0 % 0 0 % 0
Trans 0 % 0
)
2 -1,3,3,3-tetrafluoroprop-1-ene ( for further purification to an for further inhalation grade of HFC 134a produced under GMP (Good Manu for use in facturing Practice) the manufacture of a propellant for medical aerosols whose (CAS RN 811- tract and/or the respiratory or nasal cavities, taken into the oral contents are 97-2) ( Description Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0) RN 460-73-1) (CAS RN 76-16-4) (tetrafluoromethane) (CAS 355-37-3) RN tetrafluoride 1,1,1,3,3-Pentafluoropropane RN (CAS Carbon (CAS Perfluoroethane 1H-Perfluorohexane 19430-93-4) 84650-68-0) RN RN Trans 116-15-4) (CAS (CAS RN ethylene Perfluoro(4-methyl-2-pentene) 685-63-2) (CAS (Perfluorobutyl) RN Hexafluoropropene 338-65-8) (CAS 354-58-5) RN 1,1,2,3,4,4-hexafluorobuta-1,3-diene RN (CAS (CAS 2-Chloro-1,1-difluoroethane 1,1,1-Trichlorotrifluoroethane 2,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1) RN (CAS 10 10 20 (2,3,3,3-tetrafluoropropene) 10 2,3,3,3-Tetrafluoroprop-1-ene 20 10 20 30 40 10 10 TARIC
CN code *2903 39 31 *2903 39 ex 2903 39 27 ex 2903 39 28 ex 2903 39 28 ex 2903 39 29 ex 2903 39 ex 2903 39 ex 2903 39 ex 2903 74 00 ex 2903 77 60 *ex 2903 39 35 *ex 2903 39 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 22
Date foreseen for mandatory review
31.12.2021 31.12.2019 31.12.2018 31.12.2021 31.12.2022 31.12.2022 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 Supplementary unit — — — — — — — — — — — — —
duty 0 % 0 % 0 % Rate of autonomous
]octadeca-7,15-diene ]octadeca-7,15-diene
5,10
.0
2,13
.0
6,9 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
— 0,001 mg/kg or less of tetrachlorodibenzodioxines, of less or mg/kg — 0,001 tetrachlorodibenzofurans, of less or mg/kg — 0,001 — 0,2 mg/kg of tetrachlorobiphenyls or less (CAS RN 13560-89-9) RN (CAS Description Chlorotrifluoroethylene (CAS RN 79-38-9) 102687-65-0) RN RN (CAS (CAS Chlorotrifluoroethylene [12.2.1.1 Trans-1-chloro-3,3,3-trifluoropropene 1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo 930-28-9) Hexabromocyclododecane 115-25-3) RN RN (CAS 60811-21-4) (CAS Chlorocyclopentane 84852-53-9) RN Octafluorocyclobutane RN (CAS (CAS 4-Bromo-2-chloro-1-fluorobenzene 1,2-Bis(pentabromophenyl)ethane 462-06-6) 98-15-7) RN % or more and containing: 2,6-Dichlorotoluene, of a purity by weight of 99 138526-69-9) RN (CAS 1133-80-8) RN (CAS Fluorobenzene RN (CAS 3-Chloro-alpha,alpha,alpha-trifluorotoluene (CAS 1-Bromo-3,4,5-trifluorobenzene 2-Bromo-9H-fluorene 10 10 10 40 50 60 15 20 40 50 75 80 85 TARIC
CN code ex 2903 77 90 ex 2903 79 30 ex 2903 89 80 ex 2903 89 80 ex 2903 99 80 ex 2903 99 80 ex 2903 99 80 ex 2903 99 80 ex 2903 99 80 ex 2903 99 80 ex 2903 99 80 *ex 2903 89 80 *ex 2903 89 80 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 23
Date foreseen for mandatory review
31.12.2019 31.12.2019 31.12.2020 31.12.2020 31.12.2020 31.12.2019 31.12.2019 31.12.2019 31.12.2020 31.12.2019 31.12.2020 31.12.2022 31.12.2018 31.12.2019 31.12.2019 Supplementary unit — — — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
)
-styrenesulphonate (CAS RN 2695-37-6)
2 p 3808 92 ( 3808 92 Description Trichloronitromethane (CAS RN 76-06-2), for the manufacture of goods of subheading 1561-92-8) of RN goods 75-52-5) (CAS of 79-24-3) RN 2-methylprop-2-ene-1-sulphonate Sodium manufacture 108-03-2) RN (CAS Sodium the 79-46-9) RN (CAS Nitromethane for RN (CAS Nitroethane 76-06-2), (CAS 1-Nitropropane RN 1512-30-7) 97-00-7) 2-Nitropropane (CAS 98-59-9) RN RN Trichloronitromethane RN (CAS (CAS 350-46-9) (CAS chloride 1-Chloro-2,4-dinitrobenzene RN chloride Difluoromethanesulphonyl 98-60-2) (CAS Tosyl RN 1-Fluoro-4-nitrobenzene 594-44-5) (CAS 128-42-7) RN chloride RN (CAS 4-Chlorobenzenesulphonyl 100-00-5) (CAS chloride RN acid Ethanesulphonyl (CAS 4,4'-Dinitrostilbene-2,2'-disulfonic 1-Chloro-4-nitrobenzene 30 50 10 20 30 40 10 20 25 30 35 40 50 60 70 TARIC
CN code ex 2904 10 00 ex 2904 10 00 ex 2904 20 00 ex 2904 20 00 ex 2904 20 00 ex 2904 20 00 ex 2904 91 00 ex 2904 99 00 ex 2904 99 00 ex 2904 99 00 ex 2904 99 00 ex 2904 99 00 ex 2904 99 00 ex 2904 99 00 *ex 2904 99 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 24
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2022 31.12.2022 31.12.2018 31.12.2019 Supplementary unit — — — — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
Methyl methanesulphonate (CAS RN 66-27-3) methanesulphonate (CAS Methyl tetrahydrofuran according to note 1e) to Chapter 29 of the CN RN 126-91-0) Description 1-Chloro-2-nitrobenzene (CAS RN 88-73-3) RN (CAS 1-Chloro-2-nitrobenzene % by weight or more Methanol (CAS RN 67-56-1) with a purity of 99,85 RN162303-51-7) 1070-10-6) (CAS RN homopolymer 108-82-7) (CAS monohydrate, in solution a of form the not in or RN 865-47-4), whether (CAS tert-butanolate Potassium 13254-34-7) RN titanate Butyltitanate RN (CAS Tetra-(2-ethylhexyl) 5593-70-4) (CAS 2,6-Dimethylheptan-4-ol 546-68-9) RN 2,6-Dimethylheptan-2-ol RN (CAS 3087-36-3) (CAS tetrabutanolate RN tetraisopropoxide Titanium (CAS Titanium tetraethanolate Titanium (CAS % or more of (3R)-(-)-Linalool Linalool (CAS RN 78-70-6) containing by weight 90,7 20 35 80 10 11 20 25 30 40 70 80 85 10 TARIC
CN code ex 2905 11 00 ex 2905 19 00 ex 2904 99 00 ex 2905 11 00 ex 2905 19 00 ex 2905 19 00 ex 2905 19 00 ex 2905 19 00 ex 2905 19 00 ex 2905 19 00 ex 2905 22 00 *ex 2905 19 00 *ex 2905 19 00 ______
M7 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 25
Date foreseen for mandatory review
31.12.2021 31.12.2020 31.12.2022 31.12.2021 31.12.2022 31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2018 31.12.2019 Supplementary unit — — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -Butylcyclohexanol (CAS RN 98-52-2) tert Description 3,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9) RN 504-63-2) (CAS RN 3,7-Dimethyloct-6-en-1-ol (CAS 584-03-2) Propane-1,3-diol RN 17913-76-7) (CAS RN Butane-1,2-diol (CAS 112-47-0) 2,4,7,9-Tetramethyl-4,7-decanediol RN 78-26-2) (CAS 77-85-0) RN Decane-1,10-diol 75-89-8) RN (CAS 105-08-8) RN (CAS 2-Methyl-2-propylpropane-1,3-diol 80-04-6) RN (CAS Ethylidynetrimethanol RN (CAS 2,2,2-Trifluoroethanol (CAS Cyclohex-1,4-ylenedimethanol 4,4'-Isopropylidenedicyclohexanol 4- 20 10 20 30 40 50 10 20 10 20 50 TARIC
CN code ex 2905 22 00 ex 2905 39 95 ex 2905 39 95 ex 2905 39 95 ex 2905 49 00 ex 2905 59 98 ex 2906 19 00 ex 2906 19 00 ex 2906 19 00 *ex 2905 39 95 *ex 2905 39 95 ______
M7 M6 M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 26
Date foreseen for mandatory review
31.12.2018 31.12.2022 31.12.2020 31.12.2019 31.12.2019 31.12.2021 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2021 31.12.2018 Supplementary unit — — — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 -cresol) (CAS RN 111850-25-0) m 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
by weight of 99 % or more by weight of 99 Description 1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7) RN (CAS 60-12-8) 1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene RN 946525-30-0) (CAS RN 2-Phenylethanol (CAS 106-44-5) 2-Bromo-5-iodo-benzenemethanol 135-19-3) RN 576-26-1) RN (CAS (CAS RN 106-44-5) with a purity (CAS RN 108-39-4) and para-cresol of meta-cresol Mixture 92-69-3) RN (CAS p-Cresol 108-46-3) RN (CAS 2-Naphthol 85-60-9) RN (CAS 2,6-Xylenol 623-05-2) 129188-99-4) RN (CAS Biphenyl-4-ol RN RN (CAS Resorcinol 27955-94-8) (CAS (CAS 6,6'-Di-tert-butyl-4,4'-butylidenedi-m-cresol 95-71-6) RN alcohol 4,4'-(3,3,5-Trimethylcyclohexylidene)diphenol RN (CAS 4-Hydroxybenzyl (CAS 4,4',4'-Ethylidynetriphenol 2-Methylhydroquinone 6,6',6'-Tricyclohexyl-4,4',4'-butane-1,1,3-triyltri( 20 30 40 20 30 10 10 20 10 15 20 25 30 45 50 TARIC
CN code ex 2906 29 00 ex 2906 29 00 ex 2907 12 00 ex 2907 12 00 ex 2907 15 90 ex 2907 19 10 ex 2907 19 90 ex 2907 21 00 ex 2907 29 00 ex 2907 29 00 ex 2907 29 00 ex 2907 29 00 ex 2907 29 00 ex 2907 29 00 *ex 2906 29 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 27
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2020 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 -cresol (CAS RN 1709-70-2) 0 % 0 p 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -(mesitylene-2,4,6-triyl)tri- 0 % 0 ’ α ’, α , α
-butyl- tert by weight of 99 % or more by weight of 99 Description 2,2'-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8) hydrated RN not (CAS 771-61-9) or 2,2'-Methylenebis(6-cyclohexyl-p-cresol) 1478-61-1) RN whether 2,2',2’,6,6',6'-Hexa- 106-48-9) RN (CAS Phloroglucinol 99627-05-1) (CAS RN Pentafluorophenol 371-41-5) RN (CAS 4,4'-(Perfluoroisopropylidene)diphenol 100-02-7) RN (CAS 4-Chlorophenol RN (CAS 3,4,5-Trifluorophenol 148-25-4) (CAS 4-Fluorophenol RN 4-Nitrophenol 111-44-4) (CAS RN acid (CAS 4,5-Dihydroxynaphthalene-2,7-disulphonic ether Bis(2-chloroethyl) Mixture of isomers nonafluorobutyl or nonafluorobutyl methyl ether ethyl ether, of a purity 65 70 85 10 20 30 40 50 30 40 20 30 TARIC
CN code ex 2907 29 00 ex 2907 29 00 ex 2907 29 00 ex 2908 19 00 ex 2908 19 00 ex 2908 19 00 ex 2908 19 00 ex 2908 19 00 ex 2908 99 00 ex 2909 19 90 ex 2909 19 90 *ex 2908 99 00 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 28
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2021 31.12.2018 31.12.2021 31.12.2020 31.12.2019 31.12.2021 31.12.2019 31.12.2021 31.12.2020 31.12.2020 31.12.2020 Supplementary unit — — — — — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
97416-84-7) % of 1,2-diphenoxyethane % or more but not than 60 containing by weight 30 Description 3-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9) 375-03-1) RN 1163-19-5) 19870-74-7) RN (CAS RN RN (CAS 3-Ethoxy-perfluoro-2-methylhexane 21850-44-2) (CAS (CAS 1-Methoxyheptafluoropropane RN ether 8-Methoxycedrane (CAS Bis(pentabromophenyl) RN 613-62-7) 1,1'-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene 1092536-54-3) (CAS RN 2-(Phenylmethoxy)naphthalene 54914-85-1) (CAS RN {[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS 1,2-Bis(3-methyl-phenoxy)ethane 6443-69-2) 2100-42-7) RN 1,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion 121219-07-6) RN (CAS RN (CAS 3,4,5-Trimethoxytoluene (CAS 1-Chloro-2,5-dimethoxybenzene 1-Ethoxy-2,3-difluorobenzene 50 60 10 10 20 30 10 15 20 25 30 40 50 TARIC CN code ex 2909 19 90 ex 2909 19 90 ex 2909 20 00 ex 2909 30 38 ex 2909 30 38 ex 2909 30 38 ex 2909 30 90 ex 2909 30 90 ex 2909 30 90 ex 2909 30 90 ex 2909 30 90 ex 2909 30 90 ex 2909 30 90
M7 M6 M7 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 29
Date foreseen for mandatory review
31.12.2020 31.12.2021 31.12.2021 31.12.2020 31.12.2018 31.12.2020 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2021 Supplementary unit — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-dimethylbenzyl) peroxide (CAS RN 80-43-3) -1,3,5-trimethylresorcinol (CAS RN 621-23-8) α , α isoparaffinic hydrocarbons Description 1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2) RN (CAS 1569-01-3) 1-Butoxy-2,3-difluorobenzene 56718-71-9) RN O,O,O 992-78-9) RN (CAS RN (CAS 1-Propoxypropan-2-ol % or more (CAS RN 42874-03-3) Oxyfluorfen (ISO) with a purity by weight of 97 (CAS 4-(2-Methoxyethyl)phenol Ubiquinol in Bis( dissolved 24748-23-0), RN (CAS 3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane 286-20-4) 122-60-1) 556-52-5) 2210-74-4) RN 106-92-3) RN RN RN (CAS RN (CAS (CAS (CAS 1,2-Epoxycyclohexane (CAS ether (glycidol) 2-[(2-Methoxyphenoxy)methyl]oxirane ether phenyl 2,3-Epoxypropan-1-ol glycidyl 2,3-Epoxypropyl Allyl 60 70 80 10 10 20 10 30 15 20 30 50 80 TARIC
CN code ex 2909 30 90 ex 2909 30 90 ex 2909 30 90 ex 2909 49 80 ex 2909 50 00 ex 2909 50 00 ex 2909 60 00 ex 2909 60 00 ex 2910 90 00 ex 2910 90 00 ex 2910 90 00 ex 2910 90 00 ex 2910 90 00 ______
M7 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 30
Date foreseen for mandatory review
31.12.2020 31.12.2021 31.12.2021 31.12.2021 31.12.2022 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — — — — kg —
duty 0 % Rate of autonomous 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 — 85 10) % by weight of 4-isobutyl-2-methylbenzaldehyde (± (CAS RN 73206-60-7) — 15 10) % by weight of 2-isobutyl-4-methyllbenzaldehyde (CAS RN (± 68102-28-3) Description Ethoxy-2,2-difluoroethanol (CAS RN 148992-43-2) RN 52844-21-0) (CAS 112-44-7) RN Ethoxy-2,2-difluoroethanol RN (CAS (CAS mixture) of: Undecanal isomers consisting (alpha-beta isomers 2,6,6-Trimethylcyclohexenecarbaldehyde of Mixture 104-55-2) RN (CAS 40150-98-9) Cinnamaldehyde RN (CAS 5973-71-7) 4-Isobutylbenzaldehyde RN 939-97-9) (CAS RN 122-03-2) 3,4-Dimethylbenzaldehyde (CAS RN 39515-51-0) 4-tert-Butylbenzaldehyde (CAS RN 4-Isopropylbenzaldehyde (CAS 3-Phenoxybenzaldehyde 10 10 15 25 35 50 60 70 80 10 TARIC
CN code ex 2911 00 ex 2912 19 00 ex 2912 29 00 ex 2912 29 00 ex 2912 29 00 ex 2912 29 00 ex 2912 29 00 ex 2912 49 00 *ex 2912 29 00 *ex 2912 29 00 ______
M7 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 31
Date foreseen for mandatory review
31.12.2022 31.12.2020 31.12.2020 31.12.2022 31.12.2022 31.12.2022 31.12.2018 31.12.2020 31.12.2018 31.12.2021 31.12.2019 31.12.2019 Supplementary unit — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-Damascone (CAS RN 23726-91-2) β -Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1) - p Description 4-Hydroxybenzaldehyde (CAS RN 123-08-0) RN (CAS 90-02-8) 4-Hydroxybenzaldehyde RN 621-59-0) (CAS RN Salicylaldehyde (CAS 110-43-0) 3-Hydroxy-p-anisaldehyde RN 563-80-4) (CAS RN 107-87-9) Heptan-2-one (CAS RN 3-Methylbutanone (CAS 3100-36–5) Pentan-2-one RN (CAS Cyclohexadec-8-enone (R)- 66309-83-9) Camphor RN 120-46-7) trans (CAS RN 2,6-Dimethyl-1-indanone (CAS 1,3-Diphenylpropane-1,3-dione 20 30 40 20 30 40 20 30 40 50 15 25 TARIC
CN code ex 2912 49 00 ex 2912 49 00 ex 2914 29 00 ex 2914 29 00 ex 2914 29 00 ex 2914 29 00 ex 2914 39 00 ex 2914 39 00 *ex 2914 19 90 *ex 2914 19 90 *ex 2912 49 00 *ex 2914 19 90 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 32
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2018 31.12.2022 31.12.2022 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2021 31.12.2022 Supplementary unit — — — — — — — — — — —
duty Rate of autonomous 0 % 0
0 % 0 0 % 0 0 % 0 0 % % 0 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -Methylacetophenone (CAS RN 122-00-9) ′ Description Benzophenone (CAS RN 119-61-9) RN 2128-93-0) (CAS 134-84-9) RN Benzophenone RN (CAS (CAS 4-Phenylbenzophenone 134-81-6) 4-Methylbenzophenone RN (CAS 121-71-1) Benzil 100-06-1) RN 4 118-93-4) RN (CAS 42523-29-5) RN (CAS 3'-Hydroxyacetophenone 5471-51-2) RN (CAS 4'-Methoxyacetophenone RN (CAS 2'-Hydroxyacetophenone (CAS 2,7-Dihydroxy-9-fluorenone 10425-11-3) 4-(4-Hydroxyphenyl)butan-2-one RN (CAS 3,4-Dihydroxybenzophenone 30 50 60 70 80 20 25 30 36 40 45 TARIC
CN code ex 2914 39 00 ex 2914 39 00 ex 2914 50 00 ex 2914 50 00 ex 2914 50 00 ex 2914 50 00 ex 2914 50 00 *ex 2914 39 00 *ex 2914 39 00 *ex 2914 39 00 *ex 2914 50 00 ______
M8 M6 M8 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 33
Date foreseen for mandatory review
31.12.2018 31.12.2022 31.12.2020 31.12.2020 31.12.2018 31.12.2021 31.12.2018 31.12.2019 31.12.2018 31.12.2021 31.12.2019 31.12.2020 Supplementary unit — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -Benzoquinone (CAS RN 106-51-4) RN -Benzoquinone (CAS dimethylpropyl)anthraquinone (CAS RN 32588-54-8) Description 2,2',4,4'-Tetrahydroxybenzophenone (CAS RN 131-55-5) RN (CAS 24650-42-8) 2,2',4,4'-Tetrahydroxybenzophenone RN 586-37-8) (CAS RN 2,2-Dimethoxy-2-phenylacetophenone (CAS 3-Methoxyacetophenone 22009-38-7) 611-99-4) 699-83-2) RN RN RN (CAS 2-(1,1- 84-51-5) (CAS (CAS and 7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone 13936-21-5) RN Dihydroxybenzophenone 68892-28-4) 2',6'-Dihydroxyacetophenone 81-64-1) RN (CAS RN 4,4'- RN (CAS (CAS 2-Ethylanthraquinone (CAS 2-(1,2-dimethylpropyl)anthraquinone 2-Pentylanthraquinone of 1,4-Dihydroxyanthraquinone 720-94-5) mass p RN Reaction (CAS 1-(4-Methylphenyl)-4,4,4-trifluorobutane-1,3-dione 55 60 65 75 80 85 10 20 30 40 50 15 TARIC
CN code ex 2914 50 00 ex 2914 50 00 ex 2914 50 00 ex 2914 50 00 ex 2914 50 00 ex 2914 69 80 ex 2914 69 80 ex 2914 69 80 ex 2914 69 80 ex 2914 69 80 ex 2914 79 00 *ex 2914 50 00 ______
M8 M6 M8 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 34
Date foreseen for mandatory review
31.12.2022 31.12.2020 31.12.2018 31.12.2018 31.12.2020 31.12.2021 31.12.2021 31.12.2021 31.12.2018 31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2019 Supplementary unit — — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1) -Difluorobenzophenone (CAS RN 342-25-6) RN -Difluorobenzophenone (CAS -Butyl acetate (CAS RN 540-88-5) -Butyl acetate ′ tert formate (CAS RN 3495-36-1) Description 1-(7-Bromo-9,9-difluoro-9H-fluoren-2-yl)-2-chloroethanone (CAS RN 1378387-81-5) 756-13-8) RN 2,4 34841-35-5) RN (CAS 68418-51-9) RN (CAS 1-(7-Bromo-9,9-difluoro-9H-fluoren-2-yl)-2-chloroethanone RN (CAS Perfluoro(2-methylpentan-3-one) 42019-78-3) (CAS 3'-Chloropropiophenone 345-92-6) RN Benzene 4'- 118-75-2) RN (CAS 1,4-bis(4-Fluorobenzoyl) RN (CAS 4-Chloro-4'-hydroxybenzophenone (CAS 4,4'-Difluorobenzophenone Tetrachloro-p-benzoquinone 6923-52-0) 5726-19-2) RN RN (CAS % of caesium or more but not than 84 % Aqueous solution containing by weight 60 2454-35-5) (CAS triacetate RN acetate Antimony (CAS 2-Methylcyclohexyl acetate tert 3-Acetylphenyl 20 25 40 50 60 65 70 75 80 10 10 25 40 50
TARIC CN code ex 2914 79 00 ex 2914 79 00 ex 2914 79 00 ex 2914 79 00 ex 2914 79 00 ex 2914 79 00 ex 2914 79 00 ex 2914 79 00 ex 2915 12 00 ex 2915 29 00 ex 2915 39 00 ex 2915 39 00 ex 2915 39 00 *ex 2914 79 00
M8 M6 M7 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 35
Date foreseen for mandatory review
31.12.2020 31.12.2020 31.12.2020 31.12.2021 31.12.2021 31.12.2018 31.12.2022 31.12.2022 31.12.2019 31.12.2019 31.12.2018 31.12.2020 31.12.2020 Supplementary unit — — — — — — — — — — — — —
duty Rate of autonomous 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % % 0 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -Butylcyclohexyl acetate (CAS RN 88-41-5) -Butylcyclohexyl acetate tert Description Dodec-8-enyl acetate (CAS RN 28079-04-1) RN 54364-62-4) (CAS RN 16974-11-1) acetate (CAS RN 125-12-2) Dodec-8-enyl acetate (CAS RN 93-92-5) Dodeca-7,9-dienyl acetate (CAS RN Dodec-9-enyl acetate (CAS Isobornyl acetate 105-54-4) 1-Phenylethyl RN 7065-46-5) 2- (CAS RN butyrate (CAS 149-73-5) Ethyl chloride RN 142-19-8) 3,3-Dimethylbutyryl (CAS RN 122-51-0) orthoformate (CAS RN Trimethyl heptanoate (CAS 1070-64-0) Allyl orthoformate RN Triethyl (CAS Ethyl-6,8-dichlorooctanoate (CAS RN 19889-37-3) butanoic acid 2-Ethyl-2-methyl 60 65 70 75 80 85 10 30 45 50 55 60 65 TARIC
CN code ex 2915 39 00 ex 2915 39 00 ex 2915 39 00 ex 2915 39 00 ex 2915 39 00 ex 2915 39 00 ex 2915 90 70 ex 2915 90 70 ex 2915 90 70 ex 2915 90 70 ex 2915 90 70 *ex 2915 90 70 *ex 2915 60 19 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 36
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2018 31.12.2022 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2020 Supplementary unit — — — — — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 0 % 0
0 % 0
0 % 0 0 % 0 -pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN tert -butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN -butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate tert
-pentyl-6-[1-(3,5-di- tert -Butyl-6-(3- tert 61167-58-6) % by weight of manufacturing impurities 17 least: and containing at — % of Allyl alcohol (CAS RN 107-18-6), % or more but not than 0,02 0,01 acid (CAS RN % of Methacrylic 79-41-4), and % or more but not more than 0,1 0,01 — % of 4-Methoxyphenol — (CAS RN 150-76-5) % or more but not than 1 0,5 123968-25-2) Description Ethyl difluoroacetate (CAS RN 454-31-9) RN 13189-00-9) (CAS RN difluoroacetate (CAS Ethyl powder 2- 86273-46-3) of RN 2,4-Di- form (CAS the acrylate in 2-(2-Vinyloxyethoxy)ethyl dimethacrylate, Zinc 106-91-2) 97-63-2) RN RN (CAS than or not containing more RN powder (CAS 63451-47-8) whether monomethacrylate Zinc (CAS methacrylate methacrylate 2,3-Epoxypropyl Ethyl purity by with a weight of 98 or more % isomers (CAS RN 96-05-9) and its' methacrylate Allyl 80 10 40 70 20 30 10 20 30 TARIC
CN code ex 2915 90 70 ex 2916 12 00 ex 2916 12 00 ex 2916 13 00 ex 2916 14 00 ex 2916 14 00 ex 2916 14 00 *ex 2916 13 00 *ex 2916 12 00 ______
M8 M6 M8 M6 M7 M6 ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 37
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2019 31.12.2021 31.12.2018 31.12.2020 31.12.2021 31.12.2019 31.12.2021 31.12.2019 31.12.2018 31.12.2019 31.12.2021 31.12.2020 31.12.2021 31.12.2018 31.12.2018 Supplementary unit — — — — — — — — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 )
2 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -butylbenzoate (CAS RN 26537-19-9) tert -(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2) ′ Description Sorbic acid (CAS RN 110-44-1) for use in the manufacture of animal feeds ( feeds animal of manufacture the in use for 63721-05-1) 110-44-1) RN 2343-89-7) RN (CAS 118712-89-3) RN (CAS 3,3-dimethylpent-4-enoate 97-41-6) RN (CAS acid Methyl 701-97-3) RN (CAS 2-fluoroacrylate Sorbic 120-51-4) RN (CAS (ISO) Methyl 99-34-3) RN (CAS 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate Transfluthrin 2516-96-3) RN (CAS acid Ethyl 19719-28-9) RN (CAS benzoate 3-Cyclohexylpropionic 2905-62-6) RN (CAS acid Benzyl 52629-46-6) RN (CAS acid 3,5-Dinitrobenzoic 1017183-70-8) RN (CAS acid 2-Chloro-5-nitrobenzoic 938-18-1) RN (CAS chloride 2,4-Dichlorophenylacetic RN (CAS chloride 3,5-Dichlorobenzoyl (CAS chloride (2,4,6-Trimethylphenyl)acetyl chloride 2-Methyl-3-(4-Fluorophenyl)-propionyl 2,4,6-Trimethylbenzoyl 5773-80-8) 4 RN Methyl (CAS 4- acid Methyl 6-Bromonaphthalene-2-carboxylic 20 40 50 15 50 60 10 13 15 18 20 23 25 30 33 35 38 TARIC CN code ex 2916 19 95 ex 2916 19 95 ex 2916 19 95 ex 2916 20 00 ex 2916 20 00 ex 2916 20 00 ex 2916 31 00 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 38
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2022 31.12.2018 31.12.2020 31.12.2018 31.12.2021 31.12.2022 31.12.2022 Supplementary unit — — — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -Butylbenzoic acid (CAS RN 98-73-7) tert -Toluic acid (CAS RN 99-04-7) Description 4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8) 1711-07-5) RN 6613-44-1) RN (CAS 161957-55-7) RN (CAS chloride 54811-38-0) RN (CAS chloride 4-Bromo-2,6-difluorobenzoyl RN (CAS chloride 3-Fluorobenzoyl (CAS acid 3,5-Dimethylbenzoyl acid 3-Chloro-2-fluorobenzoic 5-Iodo-2-methylbenzoic 16331-45-6) 90-27-7) RN 15687-27-1) RN (CAS 4- RN (CAS chloride 53056-20-5) (CAS Acid 4-Ethylbenzoyl RN (INN) 2-Phenylbutyric (CAS Ibuprofen chloride 209995-38-0) (2,4-Dichlorophenyl)acetyl RN (CAS acid m (2,4,5-Trifluorophenyl)acetic 41 48 50 51 53 55 60 61 70 73 75 85 TARIC
CN code ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 ex 2916 39 90 *ex 2916 39 90 *ex 2916 39 90 *ex 2916 39 90 ______
M8 M6 M7 M8 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 39
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2019 31.12.2022 31.12.2018 31.12.2018 31.12.2019 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2020 Supplementary unit — — — — — — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -methylbenzyl) oxalate (CAS RN 18241-31-1) p Description Cobalt oxalate (CAS RN 814-89-1) 108-59-8) RN RN (CAS (CAS oxalate Bis( 105-53-3) malonate Cobalt RN Dimethyl 762-42-5) (CAS RN 23386-52-9) malonate 105-95-3) (CAS RN Diethyl 821-38-5) RN but-2-ynedioate (CAS 97-65-4) RN (CAS 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate Dimethyl RN (CAS brassylate Sodium 115-27-5) (CAS 5333-84-6) acid Ethylene RN 131-17-9) RN acid Tetradecanedioic (CAS RN (CAS Itaconic anhydride 81-84-5) (CAS 1962-75-0) anhydride 1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic 89-32-7) RN RN phthalate 3-Methyl-1,2,3,6-tetrahydrophthalic RN (CAS (CAS Diallyl (CAS anhydride Dibutyl-1,4-benzenedicarboxylate dianhydride Naphthalene-1,8-dicarboxylic Benzene-1,2:4,5-tetracarboxylic 20 30 10 20 15 20 30 50 70 30 40 10 20 25 30 TARIC
CN code ex 2917 11 00 ex 2917 11 00 ex 2917 19 10 ex 2917 19 80 ex 2917 19 80 ex 2917 19 80 ex 2917 19 80 ex 2917 19 80 ex 2917 20 00 ex 2917 20 00 ex 2917 34 00 ex 2917 39 95 ex 2917 39 95 ex 2917 39 95 *ex 2917 19 10 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 40
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2019 31.12.2019 31.12.2018 31.12.2019 31.12.2019 31.12.2018 31.12.2018 31.12.2022 31.12.2018 31.12.2021 Supplementary unit — — — — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0
)
2 0 % 0 -butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2) 0 % 0 0 % 0 tert -cholan-24-oic acid (deoxycholic (CAS acid) RN 83-44-3) β -Dihydroxy-5- α
,12- α gluconate lactate (CAS RN 11116-97-5) ( (CAS RN 11116-97-5) gluconate lactate 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 4247- or 02-3) Description Calcium digluconate monohydrate (CAS RN 66905-23-5) for use in the manufacture of calcium of manufacture 5292-45-5) 35092-89-8) the 52671-72-4) RN RN in RN (CAS (CAS use 128-69-8) (CAS 2-nitroterephthalate 1-Methyl-2-nitroterephthalate for RN acid-1,8-monoanhydride Dimethyl 66905-23-5) dianhydride(CAS 1,4,5,8-Naphthalenetetracarboxylic RN Perylene-3,4:9,10-tetracarboxylic (CAS 81-25-4) monohydrate RN digluconate 97-67-6) (CAS Calcium RN acid (CAS Cholic acid 3- 121-79-9) acids L-Malic RN Monohydroxynaphthoic (CAS 3,4,5-trihydroxybenzoate Propyl bis[3-(3,5-di- Hexamethylene 4-hydroxybenzoic (CAS RN of sodium ethyl-, propyl- or butyl salts acid or their esters Methyl-, 35 40 50 60 20 10 20 20 10 35 50 60 TARIC
CN code ex 2917 39 95 ex 2917 39 95 ex 2917 39 95 ex 2917 39 95 ex 2918 16 00 ex 2918 19 30 ex 2918 19 30 ex 2918 19 98 ex 2918 29 00 ex 2918 29 00 ex 2918 29 00 *ex 2918 29 00 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 41
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2022 31.12.2019 31.12.2019 31.12.2021 31.12.2018 31.12.2020 31.12.2022 31.12.2020 31.12.2019 31.12.2021 31.12.2018 Supplementary unit — — — — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 Description 3,5-Diiodosalicylic acid (CAS RN 133-91-5) RN 606-28-0) (CAS RN acid 141-97-9) (CAS 3,5-Diiodosalicylic RN Methyl-2-benzoylbenzoate 123-76-2) (CAS 68592-12-1) RN acetoacetate 15206-55-0) RN (CAS Ethyl 2386-87-0) RN (CAS acid 24487-91-0) RN (CAS acid 4-Oxovaleric RN (CAS benzoylformate 2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic (CAS 3,4-epoxycyclohexanecarboxylate Methyl 77-83-8) chloride 3,4-Epoxycyclohexylmethyl RN 3-Methoxy-2-methylbenzoyl 132584-17-9) (CAS 5788-17-0) RN 2,3-epoxy-3-phenylbutyrate 478-43-3) RN (CAS Ethyl 117428-51-0) RN (CAS 2-hydroxy-2-(4-phenoxyphenyl)propanoate RN (CAS 3-methoxyacrylate Ethyl (CAS acid Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate 1,8-Dihydroxyanthraquinone-3-carboxylic Methyl 70 30 50 60 70 80 10 13 15 18 20 23 25 TARIC
CN code ex 2918 29 00 ex 2918 30 00 ex 2918 30 00 ex 2918 30 00 ex 2918 30 00 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 *ex 2918 30 00 *ex 2918 99 90 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 42
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2019 31.12.2019 31.12.2021 31.12.2020 31.12.2018 31.12.2018 Supplementary unit — — — — — — — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-butylphenyl)phosphate] (CAS RN 151841- 0 % 0 tert 0 % 0 0 % 0 0 % 0 0 % 0 -butylphenyl) phosphate, monosodium (CAS RN 85209-91-2) salt tert
-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6) -4-Hydroxy-3-methoxycinnamic acid 908020-52-0) 65-5) Description Ethyl 3-ethoxypropionate (CAS RN 763-69-9) RN 96562-58-2) (CAS 100-09-4) RN 3-ethoxypropionate 52589-39-6) RN (CAS Ethyl RN (CAS 2-(4-hydroxyphenoxy)propionate (CAS 1916-07-0) acid Methyl RN RN acetate p-Anisic (CAS 118-41-2) 13832-70-7) (CAS dimethyl trans salt RN RN 3,4,5-trimethoxybenzoate 4-Methylcatechol ammonium (CAS glycyrrhetinate(CAS Methyl difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, acid Stearyl 93-07-2) 67634-00-8) acid, 3,4,5-Trimethoxybenzoic 62476-59-9) RN RN Acetic RN (CAS (CAS (CAS acid Allyl-(3-methylbutoxy)acetate 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate 3,4-Dimethoxybenzoic Sodium % or more hydroxybis[2,2'-methylenebis(4,6-di- 2,2'-Methylenebis(4,6-di- (CAS RN 95266-40-3) (ISO) purity by with a weight of 96 Trinexapac-Ethyl Aluminium 27 30 35 40 45 50 55 60 65 70 75 80 85 10 30 TARIC CN code ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2918 99 90 ex 2919 90 00 ex 2919 90 00 *ex 2918 99 90
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 43
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2021 31.12.2018 31.12.2022 31.12.2020 31.12.2020 31.12.2020 Supplementary unit — — — — — — — — — — — — — —
duty 0 % 0 % Rate of autonomous -diyl ′ 0 % 0 -biphenyl]-2,2 ′ 0 % 0 0 % 0 -dimethyl[1,1 ′ 0 % 0
0 % 0
0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -tetrakis(1,1-dimethylethyl)-6,6 ′ ,5,5 ′ ’-Dioctadecyl pentaerythritol bis(phosphite) (CAS ’-Dioctadecyl pentaerythritol RN 3806-34-6) dioxaphosphepine], (CAS RN 138776-88-2) RN dioxaphosphepine], (CAS tetra-1-naphthalenyl ester (CAS RN 198979-98-5) Description Tri-n-hexylphosphate (CAS RN 2528-39-4) 78-40-0) 5945-33-5) RN RN RN (CAS (CAS (CAS Tri-n-hexylphosphate phosphate phosphate) 78-51-3) 122-14-5) Triethyl bis(diphenyl RN RN 57018-04-9) Bisphenol-A (CAS (CAS RN Tris(2-butoxyethyl)phosphate (ISO) (CAS 4090-51-1) Fenitrothion (ISO) RN Tolclofos-methyl (CAS 2,2'-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2'-disulphide O,O 3,3 acid 25586-42-9) Phosphorous RN 154862-43-8) (CAS RN Tris(methylphenyl)phosphite (CAS 2,2'-[[3,3',5,5'-Tetrakis(1,1-dimethylethyl)[1,1'-biphenyl]-2,2'-diyl]bis(oxy)]bis[biphenyl-1,3,2- diphosphite Bis(2,4-dicumylphenyl)pentaerythritol Trimethyl phosphite (CAS RN 121-45-9) 122-52-1) RN RN 40 50 (CAS 60 (CAS 70 10 phosphite 20 phosphite 30 Trimethyl Triethyl 10 15 20 30 40 TARIC 2920 23 00 2920 23 00 2920 24 CN code ex 2919 90 00 ex 2919 90 00 ex 2919 90 00 ex 2919 90 00 ex 2920 19 00 ex 2920 19 00 ex 2920 19 00 ex 2920 29 00 ex 2920 29 00 ex 2920 29 00 ex 2920 29 00 *ex 2920 29 00
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 44
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2022 31.12.2021 31.12.2018 Supplementary unit — — — — — — — — —
duty 0 % 0 % Rate of autonomous
0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0
)
2 -butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1) tert -butyl dicarbonate (CAS RN 24424-99-5) -butyl dicarbonate tert of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of use in the manufacture % for but not than 45 % or more more fosetyl-sodium of 35 of pesticides ( % than 65 % or more but not content by of 62 liquid paste with a weight in water Description Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight by content a with solution aqueous an of form in 39148-24-8) 39148-16-8) RN RN (CAS 142-22-3) 64-67-5) (CAS Fosetyl-aluminium RN RN Fosetyl-sodium a 616-38-6) (CAS (CAS of RN dicarbonate sulphate form (CAS 2,2'-oxydiethyl Diethyl the carbonate Diallyl in Dimethyl 25446-78-0) Di- RN (CAS sulphate 2,4-Di- 2-[2-(2-tridecoxyethoxy)ethoxy]ethyl Sodium 201733-56-4) RN (CAS Bis(neopentylglycolato)diboron 50 60 10 20 40 50 60 80 60 TARIC
CN code ex 2920 90 10 ex 2920 90 10 ex 2920 90 10 ex 2920 90 10 ex 2920 90 10 ex 2920 90 70 *ex 2920 29 00 *ex 2920 29 00 *ex 2920 90 10 ______
M8 M6 M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 45
Date foreseen for mandatory review
31.12.2020 31.12.2022 31.12.2019 31.12.2018 31.12.2018 31.12.2021 31.12.2018 31.12.2022 31.12.2019 31.12.2018 31.12.2018 31.12.2020 Supplementary unit — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-(2-chloroethyl)ethanamine hydrochloride (CAS RN 821-48-7) N -Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9) -Dimethyloctylamine – boron (1:1) (CAS trichloride RN 34762-90-8) N,N Diethylamino-triethoxysilane (CAS RN 35077-00-0) 112926-00-8) Description Bis(pinacolato)diboron (CAS RN 73183-34-3) RN (CAS Bis(pinacolato)diboron 18328-90-0) 175923-04-3) 107-11-9) RN RN RN (CAS (CAS (CAS Ethyl(2-methylallyl)amine (IV), Allylamine zirconium 2-Chloro- Tetrakis(ethylmethylamino) N,N 33329-35-0) 3855-32-1) RN 646-25-3) RN (CAS RN dioxide (CAS silicon agent anti-caking of 0,5 addition % RN 107-35-7), with (CAS Taurine RN (CAS Tris[3-(dimethylamino)propyl]amine (CAS Bis[3-(dimethylamino)propyl]methylamine Decamethylenediamine 10 20 80 2-( 20 30 45 60 70 80 20 30 40 TARIC
CN code *2921 13 00 *2921 13 ex 2921 19 50 ex 2920 90 70 ex 2929 90 00 ex 2921 19 99 ex 2921 19 99 ex 2921 19 99 ex 2921 19 99 ex 2921 19 99 ex 2921 29 00 ex 2921 29 00 ex 2921 29 00 *ex 2921 19 99 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 46
Date foreseen for mandatory review
31.12.2021 31.12.2020 31.12.2022 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 Supplementary unit — — — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -dimethylpropane-1,3-diamine, (CAS RN 6711-48-4) 0 % 0 N , N
’-[3-(Dimethylamino)propyl]- 12333-70-0 or 6106-22-5) 12333-70-0 or Description 1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6) RN (CAS N 765-30-0) 1,3-Cyclohexanedimethanamine 616-84-2) RN 24605-36-5) RN (CAS RN 108-42-9) (CAS Cyclopropylamine (CAS RN acid 100-01-6) 2-aminobenzene-1,4-disulphonate (CAS 4-Amino-3-nitrobenzenesulphonic 348-54-9) RN hydrogen 3-Chloroaniline 88-74-4) RN (CAS Sodium RN (CAS 4-Nitroaniline (CAS 2-Fluoroaniline 121-47-1) 636-30-6) 2-Nitroaniline 98-44-2) RN RN RN (CAS (CAS Sodium sulphanilate (CAS RN 515-74-2), of its mono- or dihydrates (CAS RN also in form 89-63-4) (CAS acid 2,4,5-Trichloroaniline 626-43-7) RN acid 3-Aminobenzenesulfonic RN (CAS 2-Aminobenzene-1,4-disulfonic (CAS 4-Chloro-2-nitroaniline 3,5-Dichloroaniline 50 30 40 15 20 25 30 33 35 40 45 50 70 80 85 TARIC
CN code ex 2921 29 00 ex 2921 30 99 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 ex 2921 42 00 *ex 2921 30 99 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 47
Date foreseen for mandatory review
31.12.2022 31.12.2022 31.12.2022 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 -trifluoro-m-toluidine (CAS RN 121-50-6) α , α , α -toluidine (CAS RN 119-32-4) p -Methylaniline (CAS RN 100-61-8) RN 19532-03-7) (CAS RN or 62203-79-6) Description 2,5-Dichloroaniline (CAS RN 95-82-9) 6331-96-0) RN RN (CAS 88-51-7) (CAS 2,5-Dichloroaniline RN acid N 88-44-8) (CAS 3,4-Dichloroaniline-6-sulphonic RN acid 455-14-1) (CAS 4-Amino-6-chlorotoluene-3-sulphonic 98-16-8) RN acid 3-Nitro- RN (CAS 4-Aminotoluene-3-sulphonic (CAS 4-Aminobenzotrifluoride 3-Aminobenzotrifluoride 122-39-4) RN 6-Chloro- 118-03-6) (CAS RN Diphenylamine (CAS acid 2-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one (CAS of its sodium salts 7-Aminonaphthalene-1,3,6-trisulphonic 86 87 88 20 30 40 50 60 80 20 20 50 TARIC
CN code ex 2921 43 00 ex 2921 43 00 ex 2921 43 00 ex 2921 43 00 ex 2921 43 00 ex 2921 44 00 ex 2921 45 00 ex 2921 45 00 *ex 2921 42 00 *ex 2921 42 00 *ex 2921 42 00 *ex 2921 43 00 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 48
Date foreseen for mandatory review
31.12.2022 31.12.2022 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2018 31.12.2018 31.12.2021 31.12.2019 Supplementary unit — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 -diaminotoluene 0 % 0 0 % 0 p
0 % 0 3,5 % 3,5 0 % 0 0 % 0 0 % 0 -phenylenediamine and p 0 % 0 -phenylenediamine sulphate (CAS RN 615-50-9) p -1-Naphthylaniline (CAS RN 90-30-2) -Phenylenediamine (CAS RN 106-50-3) — 72 % or more but not more than 82 % of 4-methyl-m-phenylenediamine, and % of 4-methyl-m-phenylenediamine, — more but not than 82 % or more 72 and % of 2-methyl-m-phenylenediamine, — more but not than 22 % or more 17 — tar % of residual not more than 0,23 % or less of water whether or not containing 7 Description 8-Aminonaphthalene-2-sulphonic acid (CAS RN 119-28-8) 134-32-7) RN RN 40487-42-1) (CAS (CAS RN acid 1-Naphthylamine (CAS 8-Aminonaphthalene-2-sulphonic 95-64-7) (ISO) 24544-04-5) RN Pendimethalin 238098-26-5) RN (CAS N RN (CAS 3,4-Xylidine weight: (CAS 2,6-Diisopropylaniline by 4-Heptafluoroisopropyl-2-methylaniline containing (TDA), diamine Toluene of dichloroderivatives 2-Methyl- and p Mono- 60 70 20 40 50 60 80 20 30 40 50 TARIC
CN code ex 2921 49 00 ex 2921 49 00 ex 2921 49 00 ex 2921 49 00 ex 2921 49 00 ex 2921 51 19 ex 2921 51 19 ex 2921 51 19 ex 2921 51 19 *ex 2921 45 00 *ex 2921 45 00 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 49
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2018 31.12.2022 31.12.2018 31.12.2022 31.12.2020 31.12.2022 31.12.2018 31.12.2020 Supplementary unit — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 ’-Tetramethyl-2,2'-oxybis(ethylamine) (CAS ’-Tetramethyl-2,2'-oxybis(ethylamine) RN 3033-62-3) N ’, N , -Dichlorobenzidine dihydrochloride (CAS RN 612-83-9) ′ N , Description 2,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1) 1575-37-7) RN RN (CAS (CAS acid 1,2-diaminobenzene 2,4-Diaminobenzenesulphonic 4-Bromo- 81-11-8) of 3,5-diethyltoluenediamine of isomers Mixture RN (CAS 3,3 1247119-31-8) acid RN 4,4'-Diaminostilbene-2,2'-disulphonic (CAS 548-61-8) dihydrochloride RN (2R,5R)-1,6-Diphenylhexane-2,5-diamine 64464-07-9) (CAS RN Tris(4-aminophenyl)methane (CAS 1704-62-7) hydrochloride RN 2-(2-Methoxyphenoxy)ethylamine (CAS ethanol N 2-[2-(Dimethylamino)ethoxy] 60 70 10 30 40 60 70 20 30 35 TARIC
CN code ex 2921 51 19 ex 2921 51 19 ex 2921 59 90 ex 2921 59 90 ex 2921 59 90 ex 2922 19 00 ex 2922 19 00 *ex 2921 59 90 *ex 2921 59 90 *ex 2922 19 00 ______
M8 M6 M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 50
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 Supplementary unit — — — — — — — — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % % 0 0 0 % 0 0 % 0
0 % 0 0 % 0 -methyl-1,3-propanediamine (CAS RN 189253-72-3) 0 % 0 N 0 % 0
’-(2-hydroxy-ethyl) 2,2'-oxybis(ethylamine), (CAS RN ’-(2-hydroxy-ethyl) 83016-70-0) N -cresol (CAS RN 2835-95-2) o ’-trimethyl- -4-Aminocyclohexanol (CAS RN 27489-62-9) -4-Aminocyclohexanol (CAS N , N , -[2-[2-(Dimethylamino)ethoxy]ethyl]- (CAS RN 90-20-0) phonate (CAS RN 1294504-64-5) phonate (CAS Description (R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesul 1836-62-0) (R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol RN (CAS 110-76-9) 2-(2-Methoxyphenoxy)ethylamine RN N 6535-70-2) 229177-52-0) (CAS trans 90-51-7) RN RN 2-Ethoxyethylamine 5460-09-3) 87-02-5) RN (CAS (CAS N RN RN (CAS acid (1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS (CAS acid 2-Amino-5-hydroxynaphthalene-1,7-disulphonic 4-amino-5-hydroxynaphthalene-2,7-disulphonate acid 6-Amino-4-hydroxynaphthalene-2-sulphonic hydrogen 7-Amino-4-hydroxynaphthalene-2-sulphonic 591-27-5) Sodium RN 25251-42-7) 52411-34-4) (CAS 4-Amino-5-hydroxynaphthalene-2,7-disulphonic% or more acid with a purity by weight of 80 RN RN 3-Aminophenol (CAS (CAS 5-Amino- acid 1,2-Bis(2-aminophenoxy)ethane 4-Hydroxy-6-[(3-sulphophenyl)amino]naphthalene-2-sulphonic 40 50 60 65 75 80 85 10 30 40 50 60 20 25 30 40 TARIC CN code ex 2922 19 00 ex 2922 19 00 ex 2922 19 00 ex 2922 19 00 ex 2922 19 00 ex 2922 19 00 ex 2922 19 00 ex 2922 21 00 ex 2922 21 00 ex 2922 21 00 ex 2922 21 00 ex 2922 21 00 ex 2922 29 00 ex 2922 29 00 ex 2922 29 00 ex 2922 29 00
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 51
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2021 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2020 31.12.2018 31.12.2018 31.12.2022 31.12.2019 Supplementary unit — — — — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-anisidine (CAS RN 97-52-9) o Description 4-Trifluoromethoxyaniline (CAS RN 461-82-5) 52664-35-4) RN Anisidines RN (CAS 51-67-2) (CAS 4-Trifluoromethoxyaniline % or more (CAS RN 74070-46-5) Aclonifen (ISO) with a purity by weight of 97 51388-20-6) 91-68-9) RN thiophosphate 4-Nitro- salts RN RN (CAS Tris(4-aminophenyl) its (CAS (CAS 4-(2-Aminoethyl)phenol 719-59-5) and hydrochloride 3-Diethylaminophenol 5409-58-5) RN acid 4-Benzyloxyaniline 3230-94-2) 118-92-3) 1022-13-5) RN (CAS 1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic RN RN RN (CAS 2-Amino-5-chlorobenzophenone (CAS (CAS (CAS 3-(Dimethylamino)-1-(1-naphthalenyl)-1-propanone)hydrochloride (INNM) acid 5-Chloro-2-(methylamino)benzophenone 2840-28-0) aspartate Anthranilic RN Ornithine 5372-81-6) (CAS RN acid (CAS 3-Amino-4-chlorobenzoic 2-aminobenzene-1,4-dicarboxylate Dimethyl 45 63 65 70 73 75 80 85 10 20 25 35 10 10 20 25 TARIC
CN code ex 2922 29 00 ex 2922 29 00 ex 2922 29 00 ex 2922 29 00 ex 2922 29 00 ex 2922 29 00 ex 2922 29 00 ex 2922 29 00 ex 2922 39 00 ex 2922 39 00 ex 2922 39 00 ex 2922 39 00 ex 2922 43 00 ex 2922 49 85 ex 2922 49 85 *ex 2922 49 85 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 52
Date foreseen for mandatory review
31.12.2020 31.12.2021 31.12.2018 31.12.2020 31.12.2019 31.12.2019 31.12.2022 31.12.2020 31.12.2018 31.12.2022 31.12.2018 31.12.2021 31.12.2022 Supplementary unit — — — — — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0
)
5 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0
4316-73-8) Description 2- (3-Amino-4-chloro-benzoyl) benzoic acid (CAS RN 118-04-7) RN (CAS acid benzoic ( 56-40-6) (3-Amino-4-chloro-benzoyl) 0138070-7) 26774-88-9) Aqueous (CAS RN of sodium % by solution methylaminoacetate weight or more containing 40 RN 2- (CUS RN (CAS Norvaline maleate (CAS Glycine 4-(dimethylamino)but-2-enoate D-(-)-Dihydrophenylglycine 13433-00-6) 10287-53-3) (E)-Ethyl RN RN 62062-65-1) (CAS (CAS RN 21245-02-3) hydrochloride Ethyl-4-dimethylaminobenzoate (CAS RN aminomalonate hydrochloride (CAS Diethyl 134979-01-4) 693-57-2) ester 2-Ethylhexyl-4-dimethylaminobenzoate RN RN isopropyl (CAS (CAS L-alanine hydrochloride acid 1041-01-6) acid 12-Aminododecanoic RN 2-(2-(2-Aminoethoxy)ethoxy)acetic (CAS 3,5-Diiodothyronine 30 35 40 45 50 55 60 65 70 75 80 10 15 TARIC
CN code ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 49 85 ex 2922 50 00 *ex 2922 49 85 *ex 2922 50 00 *ex 2922 49 85 ______
M8 M6 M8 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 53
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2018 31.12.2021 31.12.2018 31.12.2020 31.12.2018 Supplementary unit — — — — — — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0
(± 0,5 %) by weight of (± 0,5 tetramethylammonium hydroxide %) by hydroxide, weight of tetrapropylammonium — 2 % (± 40 — % by less of carbonate, weight or 0,3 — % by less of tripropylamine, weight or 0,1 — 500 mg/kg or less of bromide and together taken sodium and potassium of less or mg/kg — 25 hydroxide, by %) weight of tetraethylammonium — 0,5 % (± 35 chloride, of mg/kg 000 1 than more — not and iron of mg/kg 2 than more — not potassium of mg/kg 10 than more — not of diallyldimethylammonium % than 67 but not more or more % 63 containing by weight chloride Description Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % 25 72556-74-2) containing 130198-05-9) solution RN aqueous RN (CAS an (CAS tetrahydrate of containing: hydrochloride chloride form 79723-02-7) solution 1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol acetate choline the RN aqueous 2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium phosphoryl in (CAS 117342-25-3) an Calcium hydroxide, phthalate RN 1643-19-2) of containing: Tetramethylammonium hydrogen (CAS RN form solution Tetramethylammonium molybdate, solution (CAS the aqueous Tetrakis(dimethylditetradecylammonium) aqueous bromide in an an Tetrabutylammonium hydroxide, of of Tetrapropylammonium form form the the in in hydroxide, 7398-69-8), Tetraethylammonium RN (CAS chloride Diallyldimethylammonium 20 70 10 10 20 25 55 70 75 80 TARIC CN code ex 2922 50 00 ex 2922 50 00 ex 2923 10 00 ex 2923 90 00 ex 2923 90 00 ex 2923 90 00 ex 2923 90 00 ex 2923 90 00 ex 2923 90 00 ex 2923 90 00
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 54
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2019 31.12.2020 31.12.2022 31.12.2018 31.12.2019 31.12.2021 31.12.2018 31.12.2021 31.12.2021 31.12.2018 31.12.2022 31.12.2018 Supplementary unit — — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -methylpropanamide (CAS RN 1062512-53-1) N -methoxy- N -Dimethylacrylamide (CAS RN 2680-03-7) N , RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9) ammonium salt RN 5165-97-9), its or Description 2-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS salt sodium its 138-24-9) or RN 15214-89-8) 42252-34-6) RN (CAS RN (CAS chloride 181289-33-8) (CAS acid N,N,N-Trimethylanilinium RN chloride 2-Acrylamido-2-methylpropanesulphonic (CAS N-methylcarbamoyl 6104-30-9) acid N-Ethyl 87333-22-0) RN (R)-(-)-3-(carbamoylmethyl)-5-methylhexanoic RN (CAS 60-35-5) (CAS Isobutylidenediurea RN 2-acetamido-3-chloropropionate 76114-73-3) 79-06-1) (CAS Methyl RN RN Acetamide (CAS (CAS 3-Chloro- 598-55-0) butylcarbamate Acrylamide RN 2-Propynyl (CAS N salts 4559-86-8) Methylcarbamate sodium RN its (CAS and Tetrabutylurea acid) 4,4'-Dihydroxy-7,7'-ureylenedi(naphthalene-2-sulfonic 85 10 15 20 25 30 35 45 50 55 60 70 80 10 TARIC
CN code ex 2923 90 00 ex 2924 19 00 ex 2924 19 00 ex 2924 19 00 ex 2924 19 00 ex 2924 19 00 ex 2924 19 00 ex 2924 19 00 ex 2924 19 00 ex 2924 19 00 ex 2924 19 00 ex 2924 21 00 *ex 2924 19 00 *ex 2924 19 00 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 55
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2019 31.12.2019 31.12.2019 31.12.2021 31.12.2021 31.12.2019 31.12.2018 31.12.2020 31.12.2018 31.12.2020 Supplementary unit — — — — — — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -(propan-2-yloxymethyl)acetamide (CAS RN 86763-47-5) (CAS -(propan-2-yloxymethyl)acetamide 0 % 0 N -(2-ethyl-6-methylphenyl)- N Description (3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9) RN (CAS 88-64-2) hydrochloride RN 34256-82-1) (3-Aminophenyl)urea (CAS RN acid (CAS 360-64-5) 3079-63-8) 4-(Acetylamino)-2-aminobenzenesulphonic (ISO), RN RN Acetochlor (CAS (CAS 98243-83-5) 2-(Trifluoromethyl)benzamide acid RN 2-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic (CAS 1009-22-9) 2-Chloro- (ISO) RN 84029-45-8) Benalaxyl-M (CAS RN 2-Bromo-4-fluoroacetanilide (CAS 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate 848655-78-7) 113614-08-7) Sodium RN RN (CAS (CAS 24731-73-5) N-(4-Amino-2-ethoxyphenyl)acetamide (ISO) RN 91-96-3) 114-26-1) Beflubutamid (CAS RN RN N,N’-1,4-Phenylenebis[3-oxobutyramide], (CAS (CAS N,N’-(3,3'-Dimethylbiphenyl-4,4'-ylene)di(acetoacetamide) (ISO) Propoxur Alachlor (ISO), (CAS RN 15972-60-8) RN (CAS (ISO), 20 Alachlor 12 15 17 19 20 23 27 30 33 37 40 43 45 TARIC 2924 25 00 2924 25 CN code ex 2924 21 00 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 56
Date foreseen for mandatory review
31.12.2021 31.12.2022 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2021 31.12.2020 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 )-2-allylcyclopropoxy)carbonylamino)-3,3-dimethylbut 0 % 0 R ,2 R )-2-(((1 S
)
5 -[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8) -anisanilide (CAS RN 120-35-4) N p )-1-Phenylethanamine ( -Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0) -Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide -Aminobenzamide (CAS RN 2835-68-9) S anoate (CUS 0143288-8) ( anoate (CUS 0143288-8) Description N-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3) RN (CAS salt isopropylamine N-Benzyloxycarbonyl-L-tert-leucine 24304-50-5) 4-Amino- RN 41131-65-1) (CAS RN N,N’-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS 609-66-5) N,N’-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide], RN ( (CAS 877179-03-8) 2-Chlorobenzamide RN 17194-82-0) 15299-99-7) N (CAS RN RN N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide (CAS (CAS 2-(4-Hydroxyphenyl)acetamide (ISO) 92-72-8) Napropamide RN 3-Amino- (CAS 5'-Chloro-3-hydroxy-2',4'-dimethoxy-2-naphthanilide p 50 53 55 60 61 62 63 64 65 73 75 80 85 TARIC
CN code ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 *ex 2924 29 70 ______
M7 M8 M6 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 57
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2022 31.12.2022 31.12.2018 Supplementary unit — — — — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -Phenylene)dimaleimide (CAS RN 3006-93-7) m -( ′ -Phenylmaleimide (CAS RN 941-69-5) Description Flutolanil (ISO) (CAS RN 66332-96-5) 135-63-7) RN RN 135-62-6) (CAS (CAS % or more (CAS RN Anthranilamide 88-68-6) of a purity by weight of 99,5 92-77-3) RN (ISO) 5'-Chloro-3-hydroxy-2'-methyl-2-naphthanilide 99189-60-3) 135-61-5) RN (CAS Flutolanil RN 92-74-0) RN (CAS 3-Hydroxy-2'-methoxy-2-naphthanilide salt (CAS RN (CAS 3-Hydroxy-2-naphthanilide sodium monoamide (CAS 3-Hydroxy-2'-methyl-2-naphthanilide its acid 2'-Ethoxy-3-hydroxy-2-naphthanilide and 1,1-Cyclohexanediacetic Saccharin 4720-86-9) N RN (CAS 538-75-0) 4,5,6,7-Tetrahydroisoindole-1,3-dione RN N,N (CAS Dicyclohexylcarbodiimide 86 88 89 91 92 93 94 97 20 10 20 30 10 TARIC
CN code ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2924 29 70 ex 2925 11 00 ex 2925 19 95 ex 2925 29 00 *ex 2925 19 95 *ex 2924 29 70 *ex 2925 19 95 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 58
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2020 31.12.2019 31.12.2020 31.12.2019 31.12.2018 31.12.2021 31.12.2018 31.12.2021 31.12.2021 31.12.2021 31.12.2018 31.12.2021 Supplementary unit — — — — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0) m -(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3) 90 % or more 90 Description Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of weight by purity 25952-53-8) a 50979-18-5) RN with RN (CAS 52449-76-0) 52315-07-8) (CAS hydrochloride RN RN 372-09-8) 22115-41-9) sulphamate N-[3-(Dimethylamino)propyl]-N’-ethylcarbodiimide (CAS (CAS RN RN Guanidine stereoisomers ester (CAS (CAS its methyl acid alpha-Bromo-o-toluonitrile % or more (CAS RN 68359-37-5) Cyfluthrin (ISO) with a purity by weight of 95 with acid Cyanoacetic 101007-06-1) (ISO) 4-Cyano-2-nitrobenzoic RN Cypermethrin 122008-85-9) 10222-01-2) (CAS RN RN (ISO) 2-( (CAS (CAS Acrinathrin 84-58-2) (ISO) 2,2-Dibromo-3-nitrilopropionamide acid RN Cyhalofop-butyl cyanoacetic 42288-26-6) 21962-45-8) (CAS of RN RN 4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile esters (CAS (CAS alkoxyalkyl acid 4-Cyano-2-methoxybenzaldehyde or 2-(4-Cyanophenylamino)acetic Alkyl m 20 30 12 13 14 16 17 20 23 25 27 30 35 40 50 61 TARIC CN code ex 2925 29 00 ex 2925 29 00 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 59
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2019 31.12.2019 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2022 Supplementary unit — — — — — — — — — — — — — —
duty 0 % 0 % Rate of autonomous
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0
own isomers of 180 position temperature but not more than 220 °C or more °C a foaming agent used as polythene and cross-linked foam elastomer resins, of thermoplastic in the manufacture Description Malononitrile (CAS RN 109-77-3) RN 126-98-7) 1897-45-6) decom (CAS RN RN 100453-11-0) (CAS RN 66230-04-4) Esfenvalerate of a purity by weight % or more in of 83 a mixture of its a Malononitrile (CAS (CAS RN 718-71-8) with Methacrylonitrile (ISO) (CAS RN powder Chlorothalonil 2-cyano-2-ethyl-3-methylhexanoate 5766-67-6) (CAS yellow Ethyl RN 2-cyano-2-phenylbutyrate 109-74-0) 36305-05-2) of (CAS Ethyl RN RN form Ethylenediaminetetraacetonitrile (CAS (CAS 104-23-4) the Butyronitrile dihydrochloride sulphate RN in 2,2'-Dimethyl-2,2'-azodipropionamidine hydrogen (CAS 123-77-3) 2638-94-0) 4-Anilino-2-methoxybenzenediazonium acid RN RN 4'-Aminoazobenzene-4-sulphonic (CAS (CAS C.C’-Azodi(formamide) 51867-77-7) acid RN 4,4'-Dicyano-4,4'-azodivaleric (CAS acid 4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic 64 65 70 74 75 80 86 89 10 20 30 35 60 80 TARIC
CN code ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2926 90 70 ex 2927 00 ex 2927 00 ex 2927 00 ex 2927 00 ex 2927 00 *ex 2927 00 ______
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 60
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2019 31.12.2020 31.12.2020 31.12.2021 31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2019 31.12.2018 31.12.2021 Supplementary unit — — — — — — — — — — — — — — —
duty 0 % Rate of autonomous
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 '-bipropionamide (CAS RN 32687-78-8) 0 % 0 N 0 % 0 , N 0 % 0 0 % 0 0 % 0 -butyl-4-hydroxyphenyl)- tert -Ethylhydroxylamine, in the form of an aqueous form solution (CAS RN -Ethylhydroxylamine, in the 624-86-2) -Isopropylhydroxylamine (CAS RN 5080-22-8) -Isopropylhydroxylamine (CAS 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 % % but not more than 36,5 133986-51-3) with a content by weight of more than 33,5 Description Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution aqueous 57966-95-7) an RN in (CAS 107-29-9) (ISO) 3,3'-Bis(3,5-di- 623-40-5) RN Cymoxanil RN RN (CAS (CAS (CAS oxime % or more Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 salt 67442-07-3) oxime Acetaldehyde more % or (CAS Metobromuron RN 3060-89-7) (ISO) with a purity by weight of 98 disodium 112410-23-8) RN Pentan-2-one acid RN (CAS N bisethanesulphonic 2582-30-1) (CAS 2-Chloro-N-methoxy-N-methylacetamide 2,2'-(hydroxyimino) RN (ISO) O of (CAS Tebufenozide solution carbonate Aqueous hydrogen Aminoguanidinium 96-29-7) hydrochloride 139968-49-3) RN semicarbazone RN (CAS propanal (CAS oxime 2-Amino-3-(4-hydroxyphenyl) (ISO) Butanone Metaflumizone 10 13 18 23 25 28 30 35 40 45 50 55 65 70 75 TARIC
CN code ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ex 2928 00 90 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 61
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2019 31.12.2022 31.12.2018 31.12.2018 31.12.2022 31.12.2018 31.12.2022 31.12.2022 Supplementary unit — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 -dimethylbenzyl isocyanate (CAS RN 2094-99-7) α , α -Isopropenyl- RN 2778-42-9) (CAS -Phenylenediisopropylidene diisocyanate Description Cyflufenamid (ISO) (CAS RN 180409-60-3) RN (CAS 91-97-4) (ISO) RN Cyflufenamid (CAS 111-36-4) diisocyanate RN % or more (CAS RN 1596-84-5) with a purity by weight of 99 Daminozide (ISO) 3,3'-Dimethylbiphenyl-4,4'-diyl (CAS isocyanate Butyl 74091-64-8) RN m (CAS m 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (and isomers 2,5 mixed diisocyanate, 52888-80-9) 3634-83-1) Trimethylhexamethylene RN RN (CAS (CAS 1,3-Bis(isocyanatomethyl)benzene (ISO) Prosulfocarb 80 85 15 20 40 50 55 60 80 10 TARIC
CN code ex 2928 00 90 ex 2928 00 90 ex 2929 10 00 ex 2929 10 00 ex 2929 10 00 ex 2929 10 00 *ex 2930 20 00 *ex 2929 10 00 *ex 2929 10 00 *ex 2929 10 00 ______
M8 M6 M8 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 62
Date foreseen for mandatory review
31.12.2021 31.12.2020 31.12.2021 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2020 31.12.2021 31.12.2020 31.12.2018 31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2019 31.12.2021 Supplementary unit — — — — — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3) tert omethyl)ethyl]phenyl}phthalamide (CAS RN 371771-07-2) Description 2-Isopropylethylthiocarbamate (CAS RN 141-98-0) RN 131538-00-6) 156-57-0) RN (CAS RN (CAS 2-Isopropylethylthiocarbamate (CAS 3446-89-7) 13194-48-4) hydrochloride 2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol RN RN 2494-88-4) Mercaptamine (CAS (CAS 31001-77-1) RN 4-(Methylthio)benzaldehyde RN (ISO) (CAS (CAS Ethoprophos sulphate 3-(Dimethoxymethylsilyl)-1-propanethiol hydrogen 2-(3-Aminophenylsulphonyl)ethyl 34840-23-8) N-(2-Methylsulfinyl-1,1-dimethyl-ethyl)-N’-{2-methyl-4-[1,2,2,2-tetrafluoro-1-(trifluor RN 23564-05-8) (CAS [2,2'-Thio-bis(4- RN 26672-22-0) [(methylsulphanyl)methylylidene]biscarbamate (CAS RN % or more (CAS RN 335104-84-2) Tembotrione (ISO) Dimethyl with a purity by (ISO), weight of 94,5 (CAS Thiophanate-methyl 42986-22-1) sulphate 95235-30-6) hydrogen RN RN % or more RN Folpet (ISO)(CAS 133-07-3) with a purity by 2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethylweight of 97,5 (CAS (CAS 70-18-8) 4-(4-Isopropoxyphenylsulphonyl)phenolacid RN 2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc (CAS Glutathione 20 10 13 14 15 16 17 19 21 22 23 25 26 27 30 33 35 TARIC CN code ex 2930 20 00 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 63
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2020 31.12.2018 31.12.2019 31.12.2022 31.12.2018 31.12.2022 31.12.2018 Supplementary unit — — — — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5) (CAS -Aminophenyl)sulphonyl]ethyl hydrogen sulphate p Description 3,3'-Thiodi(propionic acid) (CAS RN 111-17-1) 62-55-5) 1774-47-6) RN RN RN (CAS (CAS 80-07-9) (CAS acid) Ethanethioamide RN iodide 3,3'-Thiodi(propionic 100-68-5) 16630-66-3) 62-56-6) (CAS Trimethylsulfoxonium 82961-52-2) RN RN RN sulphone 2-[( RN (CAS (CAS (CAS Bis(4-chlorophenyl) (CAS sulphide (methylthio)acetate Thiourea sulphide phenyl Methyl 7575-23-7) methyl Methyl RN 3-Chloro-2-methylphenyl 120100-05-2) (CAS RN tetrakis(3-mercaptopropionate) (CAS Pentaerythritol 99129-21-2) acid RN 3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic (CAS 97042-18-7) (ISO) RN Clethodim (CAS 4-[4-(2-Propenyloxy)phenylsulphonyl]phenol 37 40 43 45 53 55 57 60 64 65 67 68 77 TARIC
CN code ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 *ex 2930 90 98 *ex 2930 90 98 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 64
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2019 31.12.2021 31.12.2018 31.12.2021 31.12.2021 31.12.2021 31.12.2021 31.12.2022 31.12.2021 31.12.2018 Supplementary unit — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 3 % 3 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-(cyclohexylthio)phthalimide (CAS RN 17796-82-6) carbonates Description Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3) 131538-00-6) RN RN (CAS (CAS dihydrate 4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol hexamethylene-1,6-bisthiosulfate Disodium (CAS RN 133-06-2) Captan (ISO) 36567-04-1) 15451-00-0) RN RN (CAS (CAS solution acid 2-Methyl-1-(methylthio)-2-propanamine 14359-97-8) 3-Sulphinobenzoic aqueous RN 127-63-9) an RN (CAS O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithio of O-ethyl-, or sodium-salt Potassium- in (CAS 1-Hydrazino-3-(methylthio)propan-2-ol 13360-78-6) sulphone N RN Diphenyl 78-50-2) (CAS RN diisobutyldithiophosphinate 819-19-2) (CAS Sodium RN oxide (CAS Trioctylphosphine Di-tert-butylphosphane 78 80 81 85 87 89 93 95 97 08 13 23 TARIC
CN code ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2930 90 98 ex 2931 39 90 ex 2931 39 90 *ex 2931 39 90 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 65
Date foreseen for mandatory review
31.12.2022 31.12.2019 31.12.2018 31.12.2021 31.12.2018 31.12.2019 31.12.2018 31.12.2020 31.12.2018 31.12.2020 31.12.2019 31.12.2019 Supplementary unit — — — — — — — — — — — —
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0
0 % 0
0 % 0
)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6) )-Prop-1-en-1-ylphosphonic acid -(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) Z tetrahydrofuran according to note 1e to Chapter 29 of the CN % by weight of cyclopentadienyl manganese tricarbonyl 4,9 phabicyclo[4.2.1]nonane Description Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4) RN (CAS solution 83411-71-6) aqueous 124-64-1) RN ( an 9-icosyl-9-phos RN (CAS of and (CAS acid 9-icosyl-9-phosphabicyclo[3.3.1]nonane N form isomers chloride Bis(2,4,4-trimethylpentyl)phosphinic 14657-64-8) the the Tetrakis(hydroxymethyl)phosphonium 5927-18-4) of RN in Mixture RN (CAS acetate (CAS acid Tetrabutylphosphonium phosphonoacetate 3-(Hydroxyphenylphosphinoyl)propionic Trimethyl 37859-55-5) Butylethylmagnesium (CAS RN 62202-86-2), form of a solution in heptane in the RN (CAS silane solution in of a the form not in Diethylmethoxyborane (CAS RN 7397-46-8), or whether (2-pentanoneoxime) tris (CAS RN 12108-13-3) Methylcyclopentadienyl manganese tricarbonyl than containing not more Methyl 25 28 30 40 43 48 55 57 03 05 15 18 TARIC
CN code ex 2931 39 90 ex 2931 39 90 ex 2931 39 90 ex 2931 39 90 ex 2931 39 90 ex 2931 39 90 ex 2931 39 90 ex 2931 90 00 ex 2931 90 00 ex 2931 90 00 ex 2931 90 00 *ex 2931 39 90 ______
M8 M6 M7 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 66
Date foreseen for mandatory review
31.12.2022 31.12.2019 31.12.2019 31.12.2018 31.12.2021 31.12.2019 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2018 31.12.2019 31.12.2020 Supplementary unit — — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 -D-galactopyranoside (CAS 0 % 0 α 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -D-fructofuranosyl-4-chloro-4 deoxy- β
-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS -Dimethylanilinium tetrakis(pentafluorophenyl)borate RN 118612-00-3) N , RN 56038-13-2) Description Ferrocene (CAS RN 102-54-5) RN 220492-55-7) (CAS RN Ferrocene 37859-57-7) (CAS 993-07-7) RN Dimethyl[dimethylsilyldiindenyl]hafnium 944129-07-1) 593-90-8) RN (CAS N RN RN (CAS Tris(4-methylpentan-2-oximino)methylsilane 61358-25-6) 1719-58-0) (CAS (CAS Trimethylsilane 3865-34-7) RN RN acid Trimethylborane 134150-01-9) RN (CAS (CAS 4-Chloro-2-fluoro-3-methoxyphenylboronic 97-99-4) RN (CAS hexafluorophosphate Chloroethenyldimethylsilane RN (CAS dioleate Bis(4-tert-butylphenyl)iodonium (CAS acid Dimethyltin alcohol (4-Propylphenyl)boronic Tetrahydrofurfuryl 14044-65-6) 1,6-Dichloro-1,6-dideoxy- RN (CAS Tetrahydrofuran-borane 20 33 35 45 50 53 60 63 65 67 70 10 10 20 TARIC
CN code ex 2931 90 00 ex 2931 90 00 ex 2931 90 00 ex 2931 90 00 ex 2931 90 00 ex 2931 90 00 ex 2931 90 00 ex 2931 90 00 ex 2931 90 00 ex 2931 90 00 ex 2932 13 00 ex 2932 19 00 *ex 2931 90 00 *ex 2932 14 00 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 67
Date foreseen for mandatory review
31.12.2019 31.12.2019 31.12.2019 31.12.2018 31.12.2021 31.12.2018 31.12.2021 31.12.2018 31.12.2022 31.12.2018 31.12.2022 Supplementary unit — — — — — — — — — — t
duty 0 % 0 % 0 % Rate of autonomous ),9'-xanthen]-3-one 0 % 0 H 0 % 0 ),9'-xanthen]-3-one (CAS H 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0
-butyrolactone hydrobromide (CAS RN 15295-77-9) γ
-Amino- α
)-(–)- S 96-5) (CAS RN 70516-41-5) RN 36431-22-8) Description 2,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1) RN 617-89-0) (CAS 92-55-7) 96-47-9) RN Di(tetrahydrofuryl)propane RN RN (CAS 2,2 % or more Furan (CAS RN 110-00-9) of a purity by weight of 99 (CAS (CAS Furfurylamine di(acetate) Tetrahydro-2-methylfuran 91-64-5) 5-Nitrofurfurylidene RN 2'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran-1(3 (CAS Coumarin 6'-Diethylamino-3'-methyl-2'-(2,4-xylidino)spiro[isobenzofuran-1(3 2033-24-1) RN ( (CAS 2,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN (CAS RN (CAS RN 95- 13076-17-0) 4511-42-6) or D-Lactide or dilactide L-Lactide 40 41 70 75 80 10 15 35 40 45 50 TARIC
CN code ex 2932 19 00 ex 2932 19 00 ex 2932 19 00 ex 2932 19 00 ex 2932 19 00 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 *ex 2932 20 90 *ex 2932 20 90 ______
M8 M6 M8 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 68
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2020 31.12.2018 31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2021 31.12.2021 31.12.2021 31.12.2021 Supplementary unit — — — — — — — — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 ]xanthen]-3-one ]xanthen]-3-one H H ),9'-[9 ),9'-[9 H H ]-xanthen]-3-one, (CAS RN H 0 % 0 ),9'-[9 H
0 % 0
d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2) (CAS RN 29512-49-0) 41382-37-0) (CAS RN 89331-94-2) Description 6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7) RN 1134960-41-0) (CAS RN 6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS 6'-(Diethylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3 564-20-5) 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate RN Sodium (CAS 3',6'-Bis(ethylamino)-2',7'-dimethylspiro[isobenzofuran-1(3 22781-23-3) (1H)-one 6'-(Dibutylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3 RN furan-2 (CAS [2,1-b] % (CAS RN 77-06-5) (ISO) Decahydro-3a,6,6,9a-tetramethylnaphth acid with a minimum purity by weight of 88 Gibberellic Bendiocarb 1222-05-5) 2,2-dimethyltetrahydrofuro[2,3- RN (4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy (CAS 943311-78-2) hexamethylindeno[5,6-c]pyran RN 1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8- (CAS 6413-10-1) RN 4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS Ethyl-2-methyl-1,3-dioxolane-2-acetate 55 60 65 70 71 80 84 10 13 15 18 20 TARIC CN code ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 20 90 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00
M7 M6 M7 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 69
Date foreseen for mandatory review
31.12.2022 31.12.2019 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2020 31.12.2021 31.12.2021 31.12.2018 31.12.2018 31.12.2019 Supplementary unit — — — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 -glucitol (CAS RN 81541-12-0) D -glucitol (CAS RN 32647-67-9) D -1,5-benzodioxepin-3-one (CAS RN 28940-11-6) RN -1,5-benzodioxepin-3-one (CAS H -Benzylidene- -(4-Methylbenzylidene)- bis-O bis-O Description 1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7) RN (CAS acid 1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic 4265-27-4) RN (CAS 24388-70-3) 99199-60-7) more % or (CAS RN 26225-79-6) (ISO) with a purity by Ethofumesate weight of 97 2-Butylbenzofuran RN RN 7-Methyl-3,4-dihydro-2 (CAS (CAS 57280-22-5) 1,3-Dihydro-1,3-dimethoxyisobenzofurane acid RN 6-Fluoro-3,4-dihydro-2H-1-benzopyran-2-carboxylic (CAS 1205-17-0) 4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane RN 1,3:2,4- (CAS 3-(3,4-Methylenedioxyphenyl)-2-methylpropanal 135861-56-2) 1,3:2,4- RN (CAS 1,3:2,4-bis-O-(3,4-dimethylbenzylidene)-D-glucitol % or more (CAS RN 365400-11-9) (ISO) with a purity by Pyrasulfotole weight of 96 25 43 45 50 53 55 65 70 75 80 85 15 TARIC
CN code ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2932 99 00 ex 2933 19 90 *ex 2932 99 00 *ex 2932 99 00 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 70
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2020 31.12.2018 31.12.2021 31.12.2019 31.12.2021 31.12.2019 31.12.2018 31.12.2022 31.12.2020 Supplementary unit — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 -pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5) H
-tolyl-5-pyrazolone (CAS RN 86-92-0) p 120068-79-3) Description 3-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9) RN 191614-02-5) (CAS 89-25-8) RN acid RN (CAS 3-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic (CAS fluoride 3-Methyl-1- (INN) 1,3-Dimethyl-5-fluoro-1H-pyrazole-4-carbonyl Edaravone 134098-61-6) RN RN (CAS 5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS 1192140-15-0) (ISO) 129630-19-9) RN Fenpyroximate RN (CAS 155601-30-2) (CAS 5-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one RN (ISO) (CAS Pyraflufen-ethyl 4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate 3-(4,5-Dihydro-3-methyl-5-oxo-1 or more % (CAS RN 36734-19-7) Iprodione (ISO) with a purity by weight of 97 25 30 35 40 45 50 55 60 70 80 35 TARIC
CN code ex 2933 19 90 ex 2933 19 90 ex 2933 19 90 ex 2933 19 90 ex 2933 19 90 ex 2933 19 90 ex 2933 19 90 ex 2933 19 90 ex 2933 19 90 ex 2933 21 00 *ex 2933 19 90 ______
M7 M6 M7 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 71
Date foreseen for mandatory review
31.12.2021 31.12.2020 31.12.2021 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2021 31.12.2020 31.12.2021 31.12.2021 Supplementary unit — — — — — — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -Hydroxyphenylhydantoin (CAS RN 2420-17-9) RN -Hydroxyphenylhydantoin (CAS p -Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2) ′ Description 1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2)/(CAS RN 32718-18-6) RN 2827-56-7) 16079-88-2)/(CAS RN RN (CAS (CAS 144689-93-0) 77-71-4) 1-Bromo-3-chloro-5,5-dimethylhydantoin hydrochloride 67747-09-5) RN RN 1-Aminohydantoin 156065-03-1) RN (CAS (CAS DL- RN 68694-11-1) 33016-47-6) (CAS 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate 5,5-Dimethylhydantoin (CAS RN RN (ISO) Ethyl (CAS (CAS (ISO) Prochloraz 80-73-9) (ISO) chloride 1-Trityl-4-formylimidazole RN copper Triflumizole 52378-40-2) (CAS Prochloraz 1007882-59-8) RN 120116-88-3) 1,3-Dimethylimidazolidin-2-one RN (CAS RN (CAS (CAS 1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea % or more (CAS RN Fenamidone (ISO) 161326-34-7) 2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate with a purity by 97 weight of (ISO) (S)-tert-Butyl Cyazofamid 2,2 50 55 60 80 15 25 35 40 45 50 55 60 65 70 75 TARIC CN code ex 2933 21 00 ex 2933 21 00 ex 2933 21 00 ex 2933 21 00 ex 2933 29 90 ex 2933 29 90 ex 2933 29 90 ex 2933 29 90 ex 2933 29 90 ex 2933 29 90 ex 2933 29 90 ex 2933 29 90 ex 2933 29 90 ex 2933 29 90 ex 2933 29 90 ______
M7 M8 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 72
Date foreseen for mandatory review
31.12.2022 31.12.2019 31.12.2021 31.12.2019 31.12.2022 31.12.2020 31.12.2020 31.12.2018 31.12.2020 31.12.2020 Supplementary unit — — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0
RN 130194-96-6) 1501976-34-6) Description Imazalil (ISO) (CAS RN 35554-44-0) RN (CAS (ISO) Imazalil 1187932-09-7) RN (CAS 153259-31-5) hydrochloride RN 2-Aminopyridin-4-ol hydrochloride(CAS 2402-77-9) 1228879-37-5) 2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine RN RN (CAS (CAS 2,3-Dichloropyridine (1:2) 89-00-9) (CAS (1S,3S,4R)-2-[(1R)-1-phenylethyl]-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate hydrochloride RN Methyl 3-piperidinamine (CAS RN (CAS acid N,4-Dimethyl-1-(phenylmethyl)- 591-22-0) dihydrochloride Pyridine-2,3-dicarboxylic (2S,5R)-5-[(benzyloxy)amino]piperidine-2-carboxylate RN Methyl (CAS 3,5-Dimethylpyridine Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4) RN (CAS ester methyl (ISO) 80 Fluroxypyr 10 11 12 13 14 15 16 17 TARIC
2933 39 50 2933 39 CN code ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 *ex 2933 29 90 *ex 2933 39 99 ______
M8 M6 M7 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 73
Date foreseen for mandatory review
31.12.2020 31.12.2020 31.12.2019 31.12.2019 31.12.2020 31.12.2019 31.12.2018 31.12.2020 31.12.2021 31.12.2019 31.12.2021 31.12.2019 31.12.2021 Supplementary unit — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
56-0) Description Methyl nicotinate (INNM) (CAS RN 93-60-7) RN 14915-37-8) (CAS RN (INNM) (CAS 188425-85-6) nicotinate powder RN 55-22-1) Methyl pyrithione (CAS RN Copper (ISO) (CAS 6602-54-6) 86604-75-3) Boscalid acid RN RN 81335-77-5) Isonicotinic (CAS (CAS RN 1802485-62-6) 2-Chloro-3-cyanopyridine hydrochloride (CAS RN 499-83-2) 2-Chloromethyl-4-methoxy-3,5-dimethylpyridine (ISO) (CAS RN Imazethapyr dihydrochloride (CAS 212322- 2-[4-(Hydrazinylmethyl)phenyl]-pyridine acid RN 85331-33-5) Pyridine-2,6-dicarboxylic (CAS 127337-60-4) RN 72830-09-2) Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate RN (CAS RN hydrochloride(CAS 3,5-Dichloro-2-cyanopyridine (CAS 2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride 2-(Chloromethyl)-3,4-dimethoxypyridine 19 20 21 22 23 24 25 26 27 28 29 31 32 TARIC
CN code ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 74
Date foreseen for mandatory review
31.12.2021 31.12.2019 31.12.2018 31.12.2022 31.12.2021 31.12.2018 31.12.2021 31.12.2019 31.12.2021 31.12.2021 31.12.2019 Supplementary unit — — — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 )
2 0 % 0 0 % 0 0 % 0 0 % 0 -benzimidazole (CAS RN-benzimidazole 102625- H
-methylpiperidine (CAS RN 105812-81-5) N 0 % 0 0 % 0 0 % 0
-4-(4'-Fluorophenyl)-3-hydroxymethyl-
trans 1003319-95-6) 64-9) Description 5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9) RN 3811-73-2) 150114-71-9) 157764-10-8) (CAS RN RN RN 5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS (CAS (CAS ( salt (ISO) 3-Chloro-(5-trifluoromethyl)-2-pyridineacetonitrile pesticides RN sodium Aminopyralid of (CAS pyridine-2-thiol-1-oxide, manufacture 1-[2-[5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]acetyl]piperidine-4-carbothioamide 109-09-1) of the 1897387-01-7) RN solution in RN (CAS Aqueous use (CAS 2-Chloropyridine for acid 239110-15-7) 2-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic RN 5-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1 (CAS 158062-67-0) (ISO) RN Fluopicolide (CAS (ISO) (-)- Flonicamid 33 34 35 36 37 40 41 45 46 47 48 TARIC CN code ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 *ex 2933 39 99
M7 M6 M8 M6 M7 M6 M7 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 75
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2022 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2021 31.12.2021 31.12.2018 31.12.2020 31.12.2018 Supplementary unit — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0) -butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1256387-74-2) Description 3-Bromopyridine (CAS RN 626-55-1) RN (CAS 3-Bromopyridine % or more (CAS RN 95737-68-1) Pyriproxyfen (ISO) of a purity by weight of 97 5570-77-4) 326476-49-7) 94239-04-0) RN Tert 135410-20-7) RN RN (CAS RN (CAS (CAS 4-Chloro-1-methylpiperidine (CAS hydrochloride 2-Fluoro-6-(trifluoromethyl)pyridine (ISO) 2-Aminomethyl-3-chloro-5-trifluoromethylpyridine 69045-84-7) Acetamiprid 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate 114311-32-9) 120014-30-4) RN (1R,3S,4S)-tert-Butyl RN RN (CAS 90717-03-6) 70258-18-3) (CAS (CAS 2,3-Dichloro-5-trifluoromethylpyridine RN RN (ISO) 5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one (CAS (CAS Imazamox (ISO) 2-Chloro-5-chloromethylpyridine Quinmerac 53 55 57 58 60 63 65 67 70 72 77 85 10 TARIC
CN code ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 39 99 ex 2933 49 10 *ex 2933 39 99 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 76
Date foreseen for mandatory review
31.12.2018 31.12.2022 31.12.2019 31.12.2020 31.12.2021 31.12.2020 31.12.2020 31.12.2020 31.12.2018 31.12.2018 31.12.2021 31.12.2019 Supplementary unit — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0
)
5 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
RN 100276-65-1) Description 3-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7) RN (CAS 52980-28-6) acid RN 3-Hydroxy-2-methylquinoline-4-carboxylic (CAS 94695-52-0) 86-98-6) 4-oxo-1,4-dihydroquinoline-3-carboxylate RN RN Ethyl (CAS (CAS 99607-70-2) acid 4,7-Dichloroquinoline RN 1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic (CAS 91-22-5) (ISO) ( RN Cloquintocet-mexyl 0141126-3) 119-65-3) (CAS (CUS 148-24-3) RN Quinoline 67-52-7) RN (CAS [1-(4-Benzyloxy-benzyl)-2-cyclobutylmethyl-octahydro-isoquinoline-4a,8a-diol] RN (CAS Isoquinoline (CAS (CAS Quinolin-8-ol 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate 6642-31-5) acid) Ethyl RN (barbituric (CAS Malonylurea 6-Amino-1,3-dimethyluracil 20 30 40 50 25 30 35 40 70 80 10 10 TARIC
CN code ex 2933 49 10 ex 2933 49 10 ex 2933 49 10 ex 2933 49 90 ex 2933 49 90 ex 2933 49 90 ex 2933 49 90 ex 2933 49 90 ex 2933 52 00 ex 2933 59 95 *ex 2933 49 10 *ex 2933 49 90 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 77
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2019 31.12.2019 31.12.2019 31.12.2020 31.12.2019 31.12.2020 31.12.2020 31.12.2018 Supplementary unit — — — — — — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 ]pyrimidine (CAS RN 7139-02-8) d
88110-89-8) Description Sitagliptin phosphate monohydrate (CAS RN 654671-77-9) RN 42487-72-9) (CAS RN 116477-30-6) monohydrate (CAS 5271-27-2) RN phosphate 2-Diethylamino-6-hydroxy-4-methylpyrimidine 156-83-2) RN (CAS Sitagliptin 26661-13-2) RN (CAS N,N’-(4,6-Dichloropyrimidine-2,5-diyl)diformamide 4318-56-3) RN (CAS 1-Methyl-3-phenylpiperazine RN (CAS 2,4-Diamino-6-chloropyrimidine 110235-47-7) (CAS N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide RN RN 6-Chloro-3-methyluracil 213265-83-9) (CAS (CAS 2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate 7365-45-9) 200938-58-5) RN (ISO) RN RN (CAS Mepanipyrim 61337-89-1) (CAS (CAS 4,6-Dichloro-5-fluoropyrimidine RN acid 6-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one 13349-82-1) (CAS 2-(4-(2-Hydroxyethyl)piperazin-1-yl)ethanesulfonic 1480-96-2) RN 1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine 13223-43-3) RN (CAS RN (CAS 2-(2-Piperazin-1-ylethoxy)ethanol 6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 or more % (CAS 5-Fluoro-2-methoxypyrimidin-4(3H)-one 5,7-Dimethoxy(1,2,4)triazolo(1,5-a)pyrimidin-2-amine 2,6-Dichloro-4,8-dipiperidinopyrimido[5,4- 13 15 17 18 20 21 23 27 30 33 37 43 45 47 50 53 57 60 TARIC CN code ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 78
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2019 31.12.2022 31.12.2021 31.12.2021 31.12.2020 31.12.2020 31.12.2020 31.12.2021 31.12.2018 Supplementary unit — — — — — — — — — — —
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 -1,2,4-triazol-1- H 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0
-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9) (CAS -(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine 55-6) RN 762240-92-6) yl)butan-2-ol hydrochloride, (CAS RN 188416-20-8) Description 1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (CAS RN 140681- 140681- RN (CAS bis(tetrafluoroborate) 1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane pyrimidin-4-yl)-2-(2,4-difluorophenyl)-1-(1 N (2R,3S/2S,3R)-3-(6-Chloro-5-fluoro (CAS (1:1) hydrochloride 36082-50-5) 3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine RN (CAS 5-Bromo-2,4-dichloropyrimidine 1214-39-7) RN (CAS 3140-73-6) 2893-78-9) 6-Benzyladenine RN RN 91-76-9) (CAS (CAS RN % or more (CAS RN 21087-64-9) (ISO) Metribuzin 2-Chloro-4,6-dimethoxy-1,3,5-triazine with a purity by 52434-90-9) weight of 93 (INNM) (CAS RN Benzoguanamine sodium (CAS Troclosene 1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione 65 70 75 77 87 89 13 15 17 40 50 TARIC
CN code ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 59 95 ex 2933 69 80 ex 2933 69 80 ex 2933 69 80 ex 2933 69 80 ex 2933 69 80 *ex 2933 59 95 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 79
Date foreseen for mandatory review
31.12.2020 31.12.2020 31.12.2018 31.12.2019 31.12.2018 31.12.2021 31.12.2022 31.12.2018 31.12.2019 31.12.2020 31.12.2018 31.12.2019 31.12.2019 31.12.2021 31.12.2018 Supplementary unit — — — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -butylphenol (CAS RN 3846-71-7) -butylphenol (CAS tert
-Butoxycarbonyl)-L-pyroglutamate (CAS RN 144978-12-1) tert -( -Benzotriazol-2-yl)-4,6-di- N -[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN L-(+)-tartrate, -[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide H N )- S 754186-36-2) Description Terbutryn (ISO) (CAS RN 886-50-0) 17766-26-6) 108-80-5) RN RN RN (CAS 41394-05-2) (CAS (CAS (ISO) RN salt acid Terbutryn 839-90-7) (CAS trisodium Cyanuric RN (ISO) 1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, (CAS Metamitron Tris(2-hydroxyethyl)-1,3,5-triazinetrione 7529-16-0) Ethyl RN 81-85-6) (CAS 64744-50-9) RN 5-Vinyl-2-pyrrolidone RN (CAS (CAS 6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione 114369-43-6) 3,3-Pentamethylene-4-butyrolactam 88671-89-0) RN ( RN (CAS 97963-62-7) (CAS (ISO) 2-(2 RN (ISO) Fenbuconazole 98809-58-6) (CAS Myclobutanil RN 5-Difluoromethoxy-2-mercapto-1-H-benzimidazole 2-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS 55 60 65 75 80 15 30 50 60 70 10 11 12 13 14 TARIC
CN code ex 2933 69 80 ex 2933 69 80 ex 2933 69 80 ex 2933 69 80 ex 2933 69 80 ex 2933 79 00 ex 2933 79 00 ex 2933 79 00 ex 2933 79 00 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 *ex 2933 79 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 80
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2020 31.12.2019 31.12.2018 31.12.2020 31.12.2019 31.12.2022 31.12.2020 31.12.2019 Supplementary unit — — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
)
5
0 % 0
-pentylphenol (CAS RN 25973-55-1) -pentylphenol (CAS tert -benzimidazol-2-one (CAS RN 55621-49-3) H )-Methyl 4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3-ethylpyrrolidine- 4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3-ethylpyrrolidine- )-Methyl R ,4 -Benzotriazol-2-yl)-4,6-di- -Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7) S H H ,3 S hosphate(V) (CAS RN 148893-10-1) ( 0143289-9) (CUS 4-methylbenzenesulfonate 2-carboxylate Description 2-(2 % or more RN 55512-33-9) (ISO)(CAS Pyridate with a purity by weight of 90 112281-82-0) % or more (CAS RN (ISO) 128639-02-1) Carfentrazone-ethyl with a purity by weight of 93 RN (CAS 2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol hexafluorop 2-(2 3-oxide 1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium more % or (CAS RN 107534-96-3) Tebuconazole (ISO) with a purity by weight of 95 1,3-Dihydro-5,6-diamino-2 582-60-5) RN (2 (CAS 5,6-Dimethylbenzimidazole 15 16 17 19 20 21 23 24 26 27 TARIC
CN code ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 *ex 2933 99 80 ______
M8 M6 M8 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 81
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2020 31.12.2019 31.12.2021 31.12.2021 31.12.2019 31.12.2021 31.12.2021 31.12.2018 31.12.2022 31.12.2021 31.12.2021 Supplementary unit — — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 ] [1,4]diazepin-11-one (CAS RN 50892-62-1) e , b -1,2,4-triazol-3-on (CAS RN 135302-13-5) H ’-tetramethyluronium tetrafluoroborate (CAS RN 125700-67-6) N ’, -dibenzo [ N H ,
-pyrrolo[3,4-b]pyridine (CAS RN 151213-40-0) N , H N )-Octahydro-1 S -4-Hydroxy-L-proline (CAS RN 51-35-4) -(bromomethyl)biphenyl-2-yl]-1-trityl-1H-tetrazole (CAS RN 124750-51-2) ,7a ′ S -(benzotriazol-1-yl)- (CAS RN 1799733-43-9) Description Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3) 93957-50-7) RN RN 66246-88-6) (CAS (CAS RN (ISO) 3-[3-(4-Fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-(E)-2-propenal (CAS Quizalofop-P-ethyl 1799733-46-2) (ISO) RN Penconazole more % or (CAS RN 55219-65-3) (ISO) with a purity by Triadimenol weight of 97 (CAS 2,4-Dihydro-5-methoxy-4-methyl-3 3-Chloro-2-(1,1-difluoro-3-buten-1-yl)-6-methoxyquinoxaline 8-Chloro-5,10-dihydro-11 (4a O 1897428-40-8) trans RN (CAS 5-[4 hydrochloride (S)-2,2,4-Trimethylpyrrolidine 4-methylbenzenesulphonate 3-ethyl-4-hydroxypyrrolidine-2-carboxylate (2S,3S,4R)-Methyl 29 30 31 33 34 36 37 38 39 40 41 42 44 TARIC
CN code ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 *ex 2933 99 80 ______
M8 M7 M8 M7 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 82
Date foreseen for mandatory review
31.12.2018 31.12.2022 31.12.2022 31.12.2018 31.12.2021 31.12.2020 31.12.2018 31.12.2020 31.12.2019 31.12.2018 Supplementary unit — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 )
5 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 3,2 % 3,2 0 % 0 0 % 0
)
2 herbicides ( Description Maleic hydrazide (ISO) (CAS RN 123-33-1) RN (CAS 79815-20-6) (ISO) RN hydrazide 76738-62-0) (CAS Maleic RN acid 125116-23-6) (CAS (S)-indoline-2-carboxylic RN (ISO) (CAS Paclobutrazol (ISO) 74844-91-0) Metconazole RN (CAS ester ( of (CAS RN manufacture Diquat dibromide (ISO) 85-00-7) in aqueous use in the solution for methyl 0133723-1) N-Boc-trans-4-Hydroxy-L-proline (CUS 96489-71-3) 36411-52-6) (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate RN RN Potassium 608-07-1) (CAS (CAS RN (ISO) 3-(Salicyloylamino)-1,2,4-triazole (CAS Pyridaben 2-(5-Methoxyindol-3-yl)ethylamine 45 46 47 50 51 52 53 54 55 57 TARIC
CN code ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 *ex 2933 99 80 *ex 2933 99 80 *ex 2933 99 80 ______
M8 M6 M8 M6 M7 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 83
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2022 31.12.2018 Supplementary unit — — — — — — — — — — — —
duty Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 Description Candesartan ethyl ester (INNM) (CAS RN 139481-58-6) 1670-82-2) RN RN (CAS (CAS (INNM) acid ester 4698-11-7) 1H-Indole-6-carboxylic ethyl RN Candesartan (CAS 96556-05-7) 58108-05-7) 10-Methoxyiminostilbene RN 18087-70-2) RN (CAS RN (CAS 1,4,7-Trimethyl-1,4,7-triazacyclononane (CAS hydrochloride pyridazine-hydrochloride octane 95-14-7) Imidazo[1,2-b] (3.3.0) RN 29385-43-1) 10605-21-7) 3-Amino-3-azabicyclo (CAS RN RN 78587-05-0) 1,2,3-Benzotriazole (CAS (CAS RN 144163-97-3) Tolytriazole (ISO) (CAS RN Carbendazim (ISO) (CAS Hexythiazox carbonate thiazol-5-ylmethyl 137-00-8) 4-Nitrophenyl RN (CAS 2-(4-Methylthiazol-5-yl)ethanol 62 67 71 72 74 78 81 82 89 10 15 20 TARIC
CN code ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2933 99 80 ex 2934 10 00 ex 2934 10 00 ex 2933 99 80 *ex 2934 10 00 ______
M7 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 84
Date foreseen for mandatory review
31.12.2022 31.12.2022 31.12.2018 31.12.2019 31.12.2019 31.12.2021 31.12.2022 31.12.2021 31.12.2022 31.12.2018 Supplementary unit — — — — — — — — kg —
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0
0 % 0 -methylmethanamine dihydrochloride (CAS RN 1185167-55-8)
N )-one (Benzisothiazolinone (BIT)) (CAS )-one (Benzisothiazolinone RN (BIT)) 2634-33-5) H
-butoxycarbonylaminothiazol-4-yl)-2-pentenoic acid (CAS RN 86978-24-7) tert (CAS RN 1247119-36-3) (CAS RN 246035-38-1) acid, methyl ester 104797-47-9) Description (S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate 98886-44-3) 26364-65-8) (2-Isopropylthiazol-4-yl)- RN RN 18480-53-0) (CAS (CAS (Z)-2-(2- 177406-68-7) RN (ISO) 2-Cyanimino-1,3-thiazolidine RN (CAS Fosthiazate (CAS 3,4-Dichloro-5-carboxyisothiazole (ISO) Benthiavalicarb-isopropyl 2-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic 1,2-Benzisothiazol-3(2 RN (CAS S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2-(acetyloxyimino)thioacetate, 25 35 40 45 60 80 15 30 40 50 TARIC
CN code ex 2934 10 00 ex 2934 10 00 ex 2934 10 00 ex 2934 10 00 ex 2934 20 80 ex 2934 20 80 *ex 2934 10 00 *ex 2934 20 80 *ex 2934 10 00 *ex 2934 20 80 ______
M8 M6 M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 85
Date foreseen for mandatory review
31.12.2020 31.12.2020 31.12.2022 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2019 Supplementary unit — — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8) -Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine N , 03-3) (CAS RN2-carboxylate 1026785-65-8) Description Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183- RN (CAS Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate 7643-08-5) N 864731-61-3) RN RN (CAS (CAS 2-Methylthiophenothiazine 110488-70-5) (INN) RN Fluralaner 3-{1,4-dioxaspiro[4.5]dec-8-yl[(trans-4-methylcyclohexyl)carbonyl]amino}-5-iodothiophene- (CAS Methyl (ISO) Dimethomorph 5234-68-4) 119446-68-3) RN % or more (CAS RN 953030-84-7) of a purity by weight of 98,5 Buprofezin (ISO) RN (CAS (CAS (ISO) (ISO) Carboxin 329216-67-3) Difenoconazole RN (CAS ethanol 2-[4-(Dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl] 60 70 10 10 11 12 13 15 16 19 TARIC
CN code ex 2934 20 80 ex 2934 20 80 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 *ex 2934 30 90 ______
M8 M6 M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 86
Date foreseen for mandatory review
31.12.2019 31.12.2021 31.12.2019 31.12.2020 31.12.2019 31.12.2019 31.12.2021 31.12.2019 31.12.2020 31.12.2020 31.12.2020 31.12.2020 Supplementary unit — — — — — — — — — — — —
duty 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 -thioxanthen-9-one (CAS RN 82799-44-8) H -diphospho-N-acetylgalactosamine disodium salt (CAS RN 91183-98-1) 63700-19-6) RN (CAS salt trisodium -diphosphoglucuronic acid ′ ′ 5(7H)-one (CAS RN 69898-40-4) Description Thiophene (CAS RN 110-02-1) RN 7529-22-8) (CAS RN Thiophene (CAS solution aqueous an 111974-74-4) 63676-22-2) more (CAS RN in % or 116255-48-2) with a purity by weight of 96 Bromuconazole (ISO) RN RN % or more 4-oxide (CAS RN 2,4-Diethyl-9 142459-58-3) (ISO) with a purity by Flufenacet weight of 95 (CAS 3159-07-7) (CAS 4-Methylmorpholine dihydrochloride RN 2-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS 11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine 5 Dibenzo[b,f][1,4]thiazepin-11(10H)-one 5 Uridine Uridine 7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(1-ethyl-2-methyl-1H-indol-3-yl)furo[3,4-b]pyridin- % or more (CAS RN Oxadiazon 19666-30-9) (ISO) with a purity by weight of 95 20 23 24 25 26 27 28 30 31 32 34 36 TARIC
CN code ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 87
Date foreseen for mandatory review
31.12.2022 31.12.2020 31.12.2020 31.12.2019 31.12.2020 31.12.2018 31.12.2021 31.12.2021 31.12.2021 31.12.2021 31.12.2020 Supplementary unit — — — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 )
0 % 0
2 0 % 0 0 % 0 0 % 0 -thieno[2,3-b][1,5]benzodiazepine (1:2) 0 % 0 H
-thioxanthenium hexafluorophosphate, (CAS H 0 % 0
-(disodium phosphate) (CAS RN 6757-06-8) ′ dihydrate (CAS RN 864743-41-9) RN 591773-92-1) Description Thidiazuron (ISO) (CAS RN 51707-55-2) for use in the manufacture of pesticides ( 1004-14-4) pesticides RN of 51997-51-4) (CAS manufacture 352232-17-8) RN 4-Propan-2-ylmorpholine the 5117-12-4) RN (CAS in RN (CAS 4-(Oxiran-2-ylmethoxy)-9H-carbazole use 2451-62-9) (CAS 11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine for RN 1-(Morpholin-4-yl)prop-2-en-1-one 51707-55-2) 675126-26-8) (CAS RN RN Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione % or more (CAS RN 60207-90-1) Propiconazole (ISO) with a purity by weight of 92 (CAS (CAS (ISO) 4-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile Thidiazuron 2-methyl-4-(4-methylpiperazin-1-yl)-10 – Propan-2-ol 5 Cytidine 10-[1,1'-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9 37 39 41 42 44 45 46 47 48 49 50 TARIC
CN code ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 *ex 2934 99 90 ______
M8 M6 M7 M6 M7 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 88
Date foreseen for mandatory review
31.12.2022 31.12.2021 31.12.2022 31.12.2022 31.12.2022 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2022 31.12.2021 Supplementary unit — — — — — — kg — — — —
duty 0 % 0 % Rate of autonomous
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 -morpholinobutyrophenone (CAS RN 119313-12-1) RN -morpholinobutyrophenone (CAS ′ -pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1) (CAS -pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate H
)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(pheny R-cis RN 120709-09-3) RN lamino)carbonyl]-1 Description Epoxiconazole (ISO) (CAS RN 133855-98-8) RN (CAS 675126-28-0) (ISO) RN Epoxiconazole (CAS 1173693-36-1) 4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile RN (CAS (CAS 2-benzyl-2-dimethylamino-4 6038-19-3) 163515-14-8) acid 1-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]ethanone RN RN (6R,7R)-7-Amino-8-oxo-3-(1-propenyl)-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic (CAS (CAS 126-33-0) hydrochloride Dimethenamide-P 1672-88-4) RN thiolactone RN (CAS DL-Homocysteine (CAS Tetrahydrothiophene-1,1-dioxide 5495-84-1) 1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione RN (CAS 2-Isopropylthioxanthone (4 52 53 54 56 57 58 60 66 72 74 75 TARIC
CN code ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 *ex 2934 99 90 *ex 2934 99 90 *ex 2934 99 90 *ex 2934 99 90 *ex 2934 99 90 *ex 2934 99 90 ______
M8 M7 M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 89
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2019 31.12.2019 31.12.2020 31.12.2020 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2021 31.12.2018 31.12.2021 31.12.2018 31.12.2021 31.12.2018 Supplementary unit — — — — — — — — — — — — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 -butyl-1,3-benzoxazole) (CAS RN 7128-64-5) tert
-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4) 2,5-Thiophenediylbis(5- 147118-40-9) RN (CAS 5-yl}-3,5-dihydroxyhept-6-enoate Description Thiophen-2-ethanol (CAS RN 5402-55-1) RN 3347-22-6) (CAS RN Thiophen-2-ethanol 145701-23-1) 18600-59-4) (CAS 144740-54-5) RN RN (ISO) more % or (CAS RN 103361-09-7) Flumioxazin (ISO) of a purity by weight of 96 RN (CAS (CAS Dithianon % or more (CAS RN 153233-91-1) Etoxazole (ISO) of a purity by weight of 94,8 120279-88-1) (CAS (ISO) 2,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) RN (ISO) Florasulam 126535-15-7) (CAS Flupyrsulfuron-methyl-sodium RN 6-Methyl-4-oxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-2-sulfonamide (CAS Toluenesulphonamides (ISO) N 133745-75-2) Triflusulfuron-methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin- RN Methyl 75903-58-1) (CAS 64902-72-3) RN N-Fluorobenzenesulphonimide RN (CAS (CAS 6-Aminopyridine-2-sulfonamide (ISO) Chlorsulfuron 76 10 79 83 84 86 87 10 15 17 20 23 25 27 28 30 35 TARIC CN code ex 2934 99 90 ex 3204 20 00 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2934 99 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 90
Date foreseen for mandatory review
31.12.2020 31.12.2019 31.12.2018 31.12.2019 31.12.2021 31.12.2018 31.12.2020 31.12.2019 31.12.2020 31.12.2018 31.12.2020 31.12.2020 31.12.2020 31.12.2020 31.12.2019 31.12.2018 31.12.2021 Supplementary unit — — — — — — — — — — — — — — — — —
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0 0 % 0
)
5
)-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl) cyclopropanecarboxamide cyclopropanecarboxamide )-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl) R
,2 R -(2-phenoxyphenyl)methanesulphonamide (CAS RN 51765-51-6) RN -(2-phenoxyphenyl)methanesulphonamide (CAS yl]-3,5-dihydroxyhept-6-enoic acid – 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) – 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine yl]-3,5-dihydroxyhept-6-enoic acid (CAS RN 1235588-99-4) more hydrochloride (CUS 0143290-2) ( 0143290-2) (CUS hydrochloride Description Penoxsulam (ISO) (CAS RN 219714-96-2) 19044-88-3) RN 122931-48-0) RN (CAS RN (CAS (ISO) (CAS (ISO) Penoxsulam (ISO) Oryzalin Rimsulfuron 80-51-3) RN (3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5- 2736-23-4) % or more (CAS RN 100784-20-1) (ISO) Halosulfuron-methyl with a purity by weight of 98 (CAS RN 4,4'-Oxydi(benzenesulphonohydrazide) (CAS 79277-27-3) (1 acid RN 2,4-Dichloro-5-sulphamoylbenzoic 232938-43-1) (CAS 215917-77-4) RN (ISO) Propoxycarbazone-sodium % or (CAS RN (ISO) 181274-15-7) with a purity by weight of 95 669008-26-8) RN (CAS Thifensulfuron-methyl RN (CAS N-(p-Toluenesulphonyl)-N’-(3-(p-toluenesulphonyloxy)phenyl)urea 101200-48-0) (CAS N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide RN 1-Methylcyclopropane-1-sulphonamide (CAS (ISO) % by weight or more (CAS RN 104040-78-0) (ISO) Flazasulfuron with a purity of 94 Tribenuron-methyl % or more (CAS RN Nicosulphuron 111991-09-4) (ISO), of a purity by 91 weight of N 42 43 45 47 48 50 52 53 54 55 56 57 58 59 63 65 67 TARIC CN code ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 91
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2021 31.12.2020 31.12.2018 31.12.2018 31.12.2022 31.12.2022 31.12.2021 Supplementary unit — — — — — — — — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
0 % 0 0 % 0 -dimethyl-1,2,4-triazol-1-sulphonamide N
, N 0 % 0 0 % 0 0 % 0 -pyrrol-1-yl)carbonyl]amino] H 0 % 0 0 % 0
-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4) N,N
)
2 -[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride -[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide ethyl]phenyl]sulfonyl]-carbamic acid ethyl ester, (CAS RN 318515-70-7) (CAS RN 25646-71-3) (CAS RN 348635-87-0) of non-alcoholic use in the manufacture by for % weight than 90 but not more more beverages ( Description Metsulfuron-methyl (ISO) (CAS RN 74223-64-6) RN (CAS (2S)-2-Benzyl- (ISO) Metsulfuron-methyl [[4-[2-[[(3-Ethyl-2,5-dihydro-4-methyl-2-oxo-1 monohydrate 53956-04-0) N sesquisulphate RN N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide 122397-96-0) 520-26-3) (CAS 3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)- RN RN glycyrrhizate 58543-16-1) (CAS (CAS Ammonium RN beta-D-glucopyranoside Hesperidin (CAS Ethylvanillin 6138-23-4) A RN Rebaudioside (CAS dihydrate % or glycoside with a rebaudioside M (CAS RN 1220616-44-3) steviol Purified content of 80 Trehalose D(+)- 73 75 77 85 88 89 10 10 20 30 40 30 TARIC
CN code ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2935 90 ex 2938 90 30 ex 2938 90 ex 2938 90 ex 2940 00 *ex 2938 90 *ex 2938 90 *ex 2935 90 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 92
Date foreseen for mandatory review
31.12.2021 31.12.2021 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2020 31.12.2019 31.12.2022 31.12.2021 Supplementary unit — — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
0 % 0 0 % 0
0 % 0
Reaction product of Acacia mearnsii extract, ammonium chloride and (CAS extract, formaldehyde RN mearnsii Reaction product of Acacia 85029-52-3) % or more by weight Blue colourant C.I. Disperse 360 content of 99 by % or more weight Yellow 241 a colourant C.I. Disperse content of 97 % or more Yellow 232 a colourant C.I Disperse content of 50 or more by % weight Red C.I. Disperse 60 content of 50 colourant Description Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a with thereon based fruits 5490-27-7) preparations myrobalan RN 56553-60-7) and and (CAS RN 70693-64-0) gambier sulphate (CAS RN from Dihydrostreptomycin triacetoxyborohydride (CAS derived Sodium 360 extracts Blue Tanning Disperse C.I. 63741-10-6) Colourant RN (CAS Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine Colourant C.I Disperse Yellow 232 (CAS RN 35773-43-4) and preparations based thereon with Colourant C.I. Disperse Red 60 (CAS RN 17418-58-5) and preparations based thereon with a 40 10 Wattle extract 10 10 Wattle 20 15 20 25 35 40 TARIC
3201 20 00 3201 20 CN code ex 3201 90 90 ex 2941 20 30 ex 2942 00 ex 3201 90 ex 3202 90 00 ex 3204 11 00 ex 3204 11 00 ex 3204 11 00 ex 3204 11 00 *ex 3204 11 00 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 93
Date foreseen for mandatory review
31.12.2020 31.12.2021 31.12.2021 31.12.2021 31.12.2021 31.12.2021 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
— C.I. Disperse Orange 61 or Disperse Orange 288, 291:1, Blue Disperse — C.I. 93:1, Violet Disperse — C.I. 54 Red Disperse C.I. containing not or — whether % or more by weight Blue colourant C.I. Disperse 72 content of 95 % or more by weight Blue colourant C.I. Disperse 359 content of 50 by % or more weight colourant C.I. Acid Blue 9 content of 50 % or more by weight colourant C.I. Acid Brown 75 content of 75 by % or more weight with a colourant C.I. Acid Brown thereon 355 75 content of Description Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a a with with thereon thereon based based containing: preparations and preparations dyes, 81-48-1) dispersion and a RN of 62570-50-7) with a (CAS Preparation RN thereon with 72 based (CAS thereon based Blue preparations 359 based preparations Disperse and Blue preparations and C.I. 2650-18-2) and Disperse 60181-77-3) Colourant RN 8011-86-7) C.I. or (CAS RN Colourant 84989-26-4 9 (CAS RN Blue 75 (CAS Acid Brown 355 C.I. Acid Brown Colourant C.I. Acid Colourant C.I. Colourant 45 50 60 10 15 17 TARIC
CN code ex 3204 11 00 ex 3204 11 00 ex 3204 12 00 ex 3204 12 00 ex 3204 12 00 *ex 3204 11 00 ______
M8 M6 M8 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 94
Date foreseen for mandatory review
31.12.2021 31.12.2021 31.12.2021 31.12.2021 31.12.2018 31.12.2021 31.12.2021 31.12.2018 31.12.2021 31.12.2021 Supplementary unit — — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
thereon with a colourant C.I. Acid Black 210 content of 50 % or more by weight with a colourant C.I. Acid Black 210 thereon content of 50 by % or more weight with a colourant C.I. Acid Brown thereon 425 75 content of by % or more weight C.I. Acid Black 234 colourant 75 content of % or more by weight thereon with a colourant C.I. Acid Black 210 sodium content of 50 salt % or more by weight colourant C.I. Acid Blue 161/193 content of 75 by % or more weight thereon with a colourant C.I. Acid Brown 58 content of 75 by % or more weight colourant C.I. Acid Blue 80 content of 99 or more by % weight C.I. Acid Brown colourant 165 content of 75 by % or more weight with a colourant C.I. Acid Brown thereon 282 75 content of Description Colourant C.I. Acid Black 210 (CAS RN 85223-29-6 or 99576-15-5) and preparations based preparations based and preparations 99576-15-5) and or 119509-49-8) 85223-29-6 or RN 75234-41-2 (CAS RN 210 (CAS a Black 425 with Acid Brown thereon C.I. Acid based based Colourant C.I. a preparations preparations Colourant a with and and with thereon 12269-87-3) 12392-64-2) based thereon or RN based preparations based 70210-34-3 (CAS preparations and preparations RN 161/193 and 4474-24-2) and (CAS a with based thereon RN 157577-99-6) Black 234 (CAS Colourant C.I. Acid and preparations Blue 12219-65-7) RN 61724-14-9) 58 Acid or (CAS Colourant C.I. Acid Black 210 sodium (CAS RN 201792-73-6) salt based and preparations RN Brown C.I. 70236-60-1 80 (CAS Acid dye C.I. Acid Blue 182 containing anionic acid (CAS RN 12219-26-0) Liquid dye preparation Colourant RN Blue C.I. 165 (CAS Acid Colourant Brown 282 C.I. Acid Colourant Brown C.I. Acid Colourant C.I. Colourant 25 27 35 37 40 45 47 50 55 57 TARIC
CN code ex 3204 12 00 ex 3204 12 00 ex 3204 12 00 ex 3204 12 00 ex 3204 12 00 ex 3204 12 00 ex 3204 12 00 ex 3204 12 00 ex 3204 12 00 ex 3204 12 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 95
Date foreseen for mandatory review
31.12.2019 31.12.2021 31.12.2020 31.12.2021 31.12.2018 31.12.2022 31.12.2019 31.12.2019 31.12.2019 31.12.2019 31.12.2019 Supplementary unit — — — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
colourant C.I. Acid Red 52 content of 97 % or more by weight colourant C.I. Acid Red 52 content of 97 or more by % weight C.I. Acid Brown colourant 432 content of 75 by % or more weight C.I. Acid blue 25 80 colourant content of % or more by weight Red C.I. Basic 1 content of 50 or more by % weight C.I. Basic Blue 7 content of 50 colourant % or more by weight Violet 1 content of 90 based thereon with a colourant C.I. Basic % or more by weight colourant C.I Violet 11 Basic content of 90 % or more by weight Red colourant C.I Basic 1:1 content of 90 by % or more weight Black 80 content of 90 colourant C.I. Direct by % or more weight Blue 80 content of 90 colourant C.I. Direct % or more by weight Red 23 colourant C.I. Direct content of 90 Description Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a with colourant thereon a based a with preparations with thereon and thereon based 3520-42-1) based preparations RN a preparations and (CAS with and 6408-78-2) 52 thereon 989-38-8) RN Red based RN (CAS Acid a preparations (CAS 25 C.I. with and a blue 1 Colourant thereon 2390-60-5) with a Acid Red based RN thereon with C.I. Basic preparations a (CAS a with based thereon Brown RN 119509-50-1) 432 (CAS and preparations C.I. Acid Colourant based Colourant thereon and C.I. with 7 preparations based a 2390-63-8) thereon Colourant Blue and preparations with RN based Basic 3068-39-1) and thereon (CAS preparations C.I. RN 8003-69-8) based 11 and Colourant (CAS preparations RN Violet 12222-00-3) 1:1 and (CAS Basic RN Red CAS RN 8004-87-3) and preparations (CAS RN 603-47-4 or 1 Violet C.I. Basic Colourant 3441-14-3) 80 C.I (CAS Basic RN Black Colourant 80 C.I (CAS Direct Blue Colourant 23 C.I. Direct Red Colourant C.I. Direct Colourant Colourant C.I. 60 65 70 10 30 40 50 60 10 20 30 TARIC
CN code ex 3204 12 00 ex 3204 12 00 ex 3204 12 00 ex 3204 13 00 ex 3204 13 00 ex 3204 13 00 ex 3204 14 00 ex 3204 14 00 ex 3204 14 00 *ex 3204 13 00 *ex 3204 13 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 96
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2018 31.12.2022 31.12.2019 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
)
2 disodium salt (CAS RN 250688-43-8), (CAS or disodium salt RN 906532-68-1) (CAS sodium salt (sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid preparations based thereon with a colourant C.I. Black Direct 168 content by weight of 75 % or ( dyeing more, in powder for leather form % or more by weight C.I. Vat Blue 4 content of 50 % or more by weight C.I. Vat Blue 1 content of 94 % by weight, and including of the one or more but not than 75 or more more % 60 of following: 27624-67-5), RN (CAS 201 Yellow Reactive — Colourant — 1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, — 3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2- % or more by weight colourant C.I. Pigment Yellow 81 content of 50 Description Colourant C.I Direct Black 168, in powder form for leather dyeing (CAS RN 85631-88-5) and 85631-88-5) colourant RN a (CAS with dyeing thereon leather colourant based for a preparations form with and powder thereon 81-77-6) in based thereof RN 168, preparations 2379-74-0) content (CAS Black and RN a 4 Direct (CAS 482-89-3) with Blue C.I 1 RN 17095-24-8) Vat Colourant Red (CAS RN C.I. a Vat 1 (CAS Colourant with C.I. Blue 5 thereon Colourant Vat Black based C.I. Reactive preparations Colourant Colourant and on 22094-93-5) based RN Preparations (CAS 81 Yellow Pigment C.I. Colourant 40 60 70 80 30 10 TARIC
CN code ex 3204 14 00 ex 3204 15 00 ex 3204 15 00 ex 3204 17 00 ex 3204 16 00 *ex 3204 15 00 ______
M8 M7 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 97
Date foreseen for mandatory review
31.12.2021 31.12.2020 31.12.2019 31.12.2021 31.12.2018 31.12.2021 31.12.2019 31.12.2021 31.12.2019 31.12.2018 31.12.2021 Supplementary unit — — — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
colourant C.I. Pigment Green 7 content of 40 % or more by % or more weight colourant C.I. Pigment Green 7 content of 40 by % or more weight C.I. Pigment Red 49:2 60 colourant content of by % or more weight colourant C.I. Pigment Red 12 content of 35 % or more by weight colourant C.I. Pigment Orange 16 content of 90 by % or more weight C.I. Pigment Red 48:2 85 colourant content of by % or more weight colourant C.I. Pigment Blue 15:3 content of 35 by % or more weight colourant C.I. Pigment Blue 15:4 content of 35 % or more by weight colourant C.I. Pigment Red 169 content of 50 % or more by weight Colourant C.I. Pigment Red 57:1 content of 50 % or more by weight colourant C.I. Pigment Yellow 14 content of 25 Description Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a with a thereon with a based thereon with preparations based thereon and a preparations based 1328-53-6) with and a preparations RN thereon 1103-39-5) with and a (CAS based RN thereon 6410-32-8) with 7 preparations (CAS based RN thereon a Green and 49:2 preparations (CAS based with Pigment 7023-61-2) Red and 12 preparations thereon C.I. RN Pigment 147-14-8) Red and based Colourant (CAS C.I. RN Pigment 147-14-8) preparations a 48:2 Colourant (CAS C.I. RN and with Red 15:3 Colourant (CAS 12237-63-7) thereon a Pigment Blue 15:4 RN based with C.I. Pigment Blue a Orange 16 (CAS RN Colourant C.I. based thereon with Pigment 6505-28-8) and preparations (CAS preparations thereon Colourant C.I. Pigment 169 and based Colourant C.I. Red 5281-04-9) preparations Colourant Pigment RN and C.I. (CAS 5468-75-7) Colourant 57:1 RN Red (CAS Pigment 14 C.I. Yellow RN 68516-75-6) CAS RN 211502-16-8 (CAS or Brown 41 Pigment C.I. Colourant Colourant Pigment C.I. Colourant 15 16 17 18 19 20 21 22 23 24 25
TARIC CN code ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00
M7 M6 M7 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 98
Date foreseen for mandatory review
31.12.2022 31.12.2020 31.12.2021 31.12.2019 31.12.2018 31.12.2021 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
colourant C.I. Pigment Orange 13 content of 80 % or more by weight colourant C.I. Pigment Orange 13 content of 80 by % or more weight colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight colourant C.I. Pigment Red 202 content of 70 or more by % weight C.I. Pigment Yellow 120 a colourant content of 50 with a purity of 98 % by weight or more, in the form of extruded % disproportionate resin), 35 % by weight content of not beads than 1 with a moisture more by % or more weight colourant C.I. Pigment Red 53 content of 50 Description Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a with a thereon with based thereon with preparations based thereon and preparations based 147-14-8) (approx. and preparations RN pigment 3089-17-6) and (CAS resinated RN 29920-31-8) 15:1 a highly (CAS RN Blue with 78952-72-4), 202 (CAS Pigment thereon RN a Orange 13 (CAS RN Colourant C.I. based thereon with Pigment 3520-72-7) and preparations Red 120 C.I. based (CAS Pigment Yellow Colourant preparations 174 C.I. Pigment and Yellow Colourant C.I. 2092-56-0) Pigment Colourant RN C.I. (CAS Colourant 53 Red Pigment C.I. Colourant 26 33 35 40 45 65 TARIC
CN code ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 ex 3204 17 00 *ex 3204 17 00 ______
M8 M6 M8 M6 M7 M8 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 99
Date foreseen for mandatory review
31.12.2022 31.12.2022 31.12.2022 31.12.2022 31.12.2019 31.12.2021 31.12.2019 31.12.2022 31.12.2019 Supplementary unit — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
]chromen-7-yl)morpholine (CAS RN 1021540- RN 1021540- (CAS ]chromen-7-yl)morpholine f ]indeno[2,1- h
methyl derivatives (CAS RN 70879-65-1) methyl derivatives colourant C.I. Pigment Orange 5 content of 80 % or more by weight colourant C.I. Pigment Orange 5 content of 80 % or more by weight colourant C.I. Pigment Red 207 content of 50 by % or more weight colourant C.I. Pigment Blue 61 content of 35 % or more by based thereon with a colourant C.I. Pigment Violet 3 content of 90 arations weight by % or more weight colourant C.I. Sulphur Black 1 content of 75 % of 1-[[4-(phenylazo)phenyl]azo]naphthalen-2-ol % or more but not more than 40 35 — — % of 1-(phenylazo)naphthalen-2-ol (CAS RN 842-07-9) not more than 3 — (CAS RN 2646-17-5) % of 1-[(2-methylphenyl)azo]naphthalen-2-ol not more than 3 % of water — more but not than 65 % or more 55 by % or more weight colourant C.I. Solvent Yellow 133 content of 97 (trifluoromethyl)-3,13-dihydrobenzo[ 64-6) Description Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a with a thereon with a based thereon with preparations based thereon and preparations based 3468-63-1) and preparations RN 71819-77-7) a and (CAS RN with 1324-76-1) 5 (CAS thereon RN Orange 207 based weight: (CAS Pigment Red preparations by 61 C.I. Pigment 205057-15-4) and containing Blue a Colourant 1326-82-5) RN C.I. paste, Pigment with RN (CAS Colourant wet C.I. thereon (CAS 49 of Colourant based 1 Violet form preparations Black Solvent a 3 (CAS RN 1325-82-2 CAS RN 101357-19-1) or C.I. Pigment Violet Colourant and prep and Sulphur C.I. in 51202-86-9) C.I. Colourant preparation, RN Colourant colourant (CAS Red 133 Yellow Solvent C.I Colourant 4-(3-(4-butoxyphenyl)-6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11- dye, Photochromic 75 80 85 88 12 13 14 16 21
TARIC CN code ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 *ex 3204 17 00 *ex 3204 17 00 *ex 3204 17 00 *ex 3204 17 00 *ex 3204 19 00
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 100
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2021 Supplementary unit — — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
)
5
5
)
5
)
5
)
5
)
5
dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenoxy)ethyl) decanedioate (CUS 0133724-2) ( (CUS 0133724-2) dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenoxy)ethyl) decanedioate ( f]chromen-3-yl)phenyl)morpholine (CUS 0133726-4) ( dihydrobenzo[h]indeno[2,1-f]chromene-11-carbonitrile (CUS 0133725-3) ( 1-f]chromene-3, 3-diyl)diphenol (CUS 0133728-6) ( 0133729-7) (CUS dihydrobenzo[h]indeno[2,1-f]chromen-3-yl]phenoxy}ethyl) decanedioate % or more by weight colourant C.I. Solvent Red 49:2 content of 90 % or more by weight colourant C.I. Solvent Brown 53 content of 95 % or more by weight colourant C.I. Solvent Blue 104 content of 97 by or more % based colourant C.I. Solvent Yellow 98 thereon with a content of 95 arations weight drobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl}piperidine (CUS 0133727-5) ( (CUS 0133727-5) drobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl}piperidine Description Photochromic dye, bis(2-(4-(7-methoxy-3-(4-methoxyphenyl)-11-phenyl-13, 13-dipropyl-3, 13- 13-dipropyl-3, bis(2-(4-(7-methoxy-3-(4-methoxyphenyl)-11-phenyl-13, dye, Photochromic 4-(4-(13,13-dimethyl-3,11-diphenyl-3,13-dihydrobenzo[h]indeno[2,1- dye, Photochromic a 13-dihydrobenzo[h]indeno[2, with 13-dipropyl-3, thereon 3-(4-butoxyphenyl)-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3,13- 4'-(7-methoxy-11-phenyl-13, based dye, 4, preparations Photochromic 13- dye, and bis(2-{4-[11-cyano-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3, Photochromic 116-75-6) dye, RN Photochromic 13-dihy 1-{4-(6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-3, (CAS dye, Photochromic 104 Blue Solvent a with thereon based 49:2 (CAS RN 1103-39-5) and preparations Solvent Red Colourant C.I. C.I. a with based thereon Colourant C.I. Solvent Brown 53 (CAS RN 64696-98-6) and preparations Colourant Yellow 98 (CAS RN 27870-92-4 C.I. Solvent Colourant CAS RN 12671-74-8) or and prep 43 47 53 55 57 63 70 71 73 77 TARIC
CN code ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ex 3204 19 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 101
Date foreseen for mandatory review
31.12.2022 31.12.2021 31.12.2019 31.12.2022 31.12.2018 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2 colourant C.I. Solvent Blue 67 content of 98 % or more by weight colourant C.I. Solvent Blue 67 content of 98 % or more by weight 351 thereon with a colourant C.I. Fluorescent Brightener content of 90 based with a colourant C.I Solvent thereon 35-0) and preparations Yellow 172 known (also as by % or more weight C.I. Solvent Yellow 135) 90 content of but % or more light naphthenic (CAS RN hydrotreated 64742-53-6), containing by weight 40 % C.I. Solvent Red 175 than 60 not more ( maceutical industry % of more but isopropoxytitanium not triisostearate more than 2,5 Description Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a with thereon based preparations and 12226-78-7) based RN preparations distillates, (CAS and petroleum 67 27344-41-8) in Blue RN (CAS Solvent 68411-78-6) 351 C.I. RN Brightener Colourant (CAS Fluorescent 175 C.I. Red Colourant Solvent C.I. colourant 135) (CAS RN 68427- known Solvent Yellow C.I. 172 (also as Solvent Yellow Colourant C.I of Preparations Aluminium dyes lakes prepared from for use in the manufacture of pigments for the phar % or Titanium dioxide containing coated with isopropoxytitanium by weight triisostearate, 1,5 84 30 10 20 10 10 TARIC
CN code ex 3204 20 00 ex 3204 90 00 ex 3205 00 ex 3206 11 00 *ex 3204 90 00 *ex 3204 19 00 ______
M8 M6 M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 102
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2018 31.12.2019 31.12.2022 31.12.2018 31.12.2018 Supplementary unit — — — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
0 % 0
0 % 0 0 % 0 — 72 % (± 2 %) of mica (CAS RN 12001-26-2) and 12001-26-2) RN (CAS mica of %) 2 (± % — 72 13463-67-7) RN (CAS dioxide titanium of %) 2 (± % — 28 % of aluminium oxide (CAS RN — 1344-28-1) more but not than 63 % or more 57 dioxide (CAS RN13463-67-7), % of titanium — and more but not than 42 % or more 37 (CAS RN silane 2943-75-1) % of triethoxycaprylyl — % or more but not than 2 1 or more by % weight C.I. Pigment Black 12 content of 50 colourant silver, of weight by % 85 than more — not — % by weight of palladium, not less than 2 titanate, — barium and — terpineol, cellulose, — ethyl ( capacitors ceramic multilayer of manufacture the in printing screen used for Description Colourant C.I. Pigment Black 12 (CAS RN 68187-02-0) and preparations based thereon with a with weight: thereon by weight: based containing 1345-05-7) by 14038-43-8) preparations Preparation RN containing RN and (CAS dispersion, (CAS 68187-02-0) Lithopone aqueous 27 RN Non Blue (CAS Pigment 12 C.I. Black Colourant Pigment C.I. Colourant containing: Preparation 10 10 10 20 30 10 Inorganic products of a kind used as luminophores TARIC 3206 50 00 3206 50 CN code ex 3206 19 00 ex 3206 42 00 ex 3206 49 70 ex 3206 49 70 ex 3207 30 00 *ex 3206 49 70
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 103
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2022 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 m μ
m, and μ
-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, N m or more but not more than 10
μ
-vinylcaprolactam, N
— 30 % by weight or more, but not more than 50 % of silver and — % of silver % by weight or more, but not than 50 more 30 palladium % of — % by weight or more, but not more than 17 8 — of a thickness 0,3 RN 18282-10-5) oxide (CAS — iron dioxide (CAS RN 13463-67-7) or titanium with coated 50 %, in organic solvents group, in the form of a solution 2-methoxy-1-propanol, of either 2-methoxy-1-methylethyl % of polymer or methyl-2-hydroxyisobutyrate, containing by weight not more than 10 acetate in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of and/or diisoamylether n-butanol and/or 4-methyl-2-pentanol and/or butyl groups, of a solution in ethanol, ethanol and in the form butanol, isopropanol or isopropanol and butanol Description Printing paste containing paste chromophore Printing a 65997-17-3): with RN modified (CAS 10) of 40 (± diameter of an average polymer coated with silver, flakes Glass isopropyl flakes based and/or Glass ester ethyl an with of monoesterified consisting ether, coating, polyester copolymer resin with Thermoplastic a solid content of 30 % or more but not more than vinyl Anti-reflection methyl of and Copolymer acid maleic of % of than 15 but not more % or more topcoat solution containing by weight 0,5 Immersion Copolymer 20 20 40 10 10 10 20 10 TARIC
CN code ex 3207 30 00 ex 3207 40 85 ex 3208 10 ex 3208 10 90 ex 3208 20 10 ex 3208 20 10 ex 3208 90 19 *ex 3207 40 85 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 104
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2022 31.12.2018 31.12.2018 31.12.2021 31.12.2018 Supplementary unit — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
-butyrolactone, γ
alkyl or aryl substituents alkyl or aryl RN (CAS 108-65-6) or (CAS RN 1569-02-4), acetate mono propylene glycol methylether RN 1569-01-3) (CAS propyleneglycol propylether copolymer or a blend of polypropylene an organic anhydride copolymer copolymer or in and propylene maleic solvent % copolymer solution in with a content of solvent butylacetate of 50 Tetrafluoroethylene %) by weight (± 2 of polymer % of 11 than more but not % or and isopropanol, containing by weight 5 methylsiloxane Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by with an reaction alkyne halide, dissolved in propylene glycol acetate methyl ether — % of alkoxygroups containing siloxane polymer with % or more but not more than 20 0,1 of an organic solvent of propyleneglycolethylether containing one or more or more % — 75 — (65 ± 10) % of — (30 ± 10) % of polyamide resin, — and naphthoquinone derivative of 1,5) % ester (3,5 ± — acid arylsilicic of 0,5) % (1,5 ± Description Chlorinated polyolefins, in a solution a in polyolefins, Chlorinated % by anhydride weight of propylene maleic but % or more not more than 20 of 5 Preparation weight: Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol by containing Solution weight: by containing Solution 25 45 20 63 15 20 40 47 50 TARIC
CN code ex 3208 90 19 ex 3208 90 19 ex 3208 90 19 ex 3208 90 19 ex 3824 99 92 ex 3208 90 19 ex 3208 90 19 *ex 3208 90 19 *ex 3208 90 91 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 105
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2022 31.12.2018 Supplementary unit — — — —
duty 0 % 0 % 0 % Rate of autonomous
]chromen-13-ol f ]indeno[2,1- h
-indole-2,3'-naphtho[2,1- H ]indeno[2,1- h ]chromene-5-carboxylate, h ]chromene-5-carboxylate,
h -benzo[ 0 % 0 H -benzo[ H
][1,4]oxazine]-9'-carboxylate, ]chromen-13-ol, b f — styrene — alkoxystyrene — alkylacrylates lactate ethyl dissolved in implants surgical of a kind of long used term the manufacture silica, for following dyes: — methyl 8'-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1 — methyl 6-(isobutyryloxy)-2,2-diphenyl-2 — methyl — 13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[ 8-methyl-2,2-diphenyl-2 — ethoxycarbonylmethyl — 13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[ Description Solution based on chemically modified natural polymers, containing two or more of the of more Copolymer of hydroxystyrene of the following: with one or more or solution two containing lactate polymers, ethyl natural in % by % by weight weight or more of xylene of and not containing 50 Silicones more than 25 modified copolymer chemically Acenaphthalene on based Solution 60 65 75 10 TARIC
CN code ex 3208 90 19 ex 3208 90 99 *ex 3208 90 19 *ex 3208 90 19 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 106
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2022 Supplementary unit — — — l —
duty 0 % 0 % 0 % Rate of autonomous ,
3 0 % 0
)
2
)
2
)
or more, but not more than 1,60 g/cm or more, but not than 1,60 more
2 0 % 0
3
chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9), Printing ink, Printing liquid, consisting of a dispersion of copolymer a vinyl and colour acrylate pigments containing by weight not more than 13 in isoparaffins, copolymer and colour % of vinyl acrylate pigments — (CAS RN 7440-22-4) and silver silver of dispersion and a polymer polyester a of consisting %, and — % or more, but not more than 57 solid content by with a total weight of 55 g/cm 1,40 of gravity specific a — with % of amorphous — silicon dioxide or % or more, but not more than 10 1 — % or more of dye C.I. Solvent Black 7 in organic solvents 3,8 ( for use in the marking of integrated circuits for use in the manufacture of electrodes ( for use in the manufacture of electrodes Description Ink: film plastic a on fixed ink weight: sensitive by ( cartridges of ink-jet use in the manufacture for Ink formulation, Heat containing ink, cartridge Disposable 10 10 20 10 20 30 TARIC
CN code ex 3215 90 70 ex 3215 90 70 ex 3215 90 70 *ex 3215 11 00 *ex 3215 19 00 *ex 3215 19 00 ______
M8 M6 M7 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 107
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2020 31.12.2018 31.12.2022 31.12.2018 31.12.2019 31.12.2018 31.12.2020 31.12.2020 Supplementary unit — — — — — — — — — —
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0
0 % 0 0 % 0
(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised (2-methylpropyl)-2-butyne-1,4-diyl ether, 0 % 0 bis 0 % 0
)
2 resin) mixed with: — wax; and polymer vinyl-based — a agent colouring — a for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multi ( function devices with oxirane, methyl terminated tetramethyldec-5-yne-4,7-diol (CAS RN 577-11-7 and 9014-85-1) Description Vinyl copolymer surface active agent based on polypropylene glycol polypropylene on Dry ink powder with a base of hybrid resin (made from polystyrene resin and acrylic polyester based isethionate agent methyl active lauroyl surface Sodium copolymer Vinyl glycol) benzoate 1,4-dimethyl-1,4- poly(ethylene sodium containing and chlorides and Surfactant polysiloxane methyltri-C8-C10-alkylammonium (INN) of of sodium mixture mixture docusate a (CAS RN 70142–34–6) Polyoxyethylated-12-hydroxystearic acid Surface-active of of Mixture consisting preparation, consisting preparation, of a mixture of sodium Surface-active docusate and ethoxylated 2,4,7,9- Surface-active Essential oil of orange, not deterpenated not orange, of 40 oil Essential 10 10 20 30 10 20 30 50 TARIC
3301 12 10 3301 12 CN code ex 3215 90 70 ex 3402 11 90 ex 3402 13 00 ex 3402 13 00 ex 3402 90 10 ex 3402 90 10 ex 3402 90 10 ex 3402 90 10 *ex 3402 13 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 108
Date foreseen for mandatory review
31.12.2020 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2020 Supplementary unit — — — — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 0 % 0 0 % 0 0 % 0
copolymers and -(2-Hydroxyethyl)-derivative of hydrolysed maize starch (CAS RN 9005-27-0) RN 9014-85-1) and a copolymer of rosin dimerised of a mixture Adhesive based on an aqueous dispersion of ethylene and (EVA) vinyl acetate solvent epoxy Two component a adhesive dispersed in microencapsulated mm or more but not than more adhesive with a thickness of 0,076 sensitive pressure Acrylic 0,127 of a width mm, of 45,7 put up in rolls but than 132 cm or more not more cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330) Preparation containing by weight: — % or more but butadiene % of not 15 styrene copolymers more than 60 or styrene isoprene % of pinene — polymers or pentadiene copolymers more but not than 30 % or more 10 dissolved in: 78-93-3) RN (CAS ketone ethyl — Methyl and 142-82-5), RN (CAS — Heptane — solvent naphta (CAS RN 64742-89-8) light aliphatic Toluene (CAS RN 108-88-3) or Description Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides synthetic of oxirane (CAS solution 2-ethylhexyloxymethyl 2,4,7,9-tetramethyl-5-decyne-4,7-diol aqueous containing ethoxylated an preparation, containing on Surface-active preparation, based Surface-active preparation Cutting-fluid O 10 30 40 50 10 30 40 50 60 70 10 20 TARIC
CN code ex 3506 91 10 ex 3506 91 10 ex 3506 91 10 ex 3506 91 10 ex 3506 91 90 ex 3402 90 10 ex 3402 90 10 ex 3403 99 00 ex 3505 10 50 ex 3506 91 90 ex 3506 91 90 ex 3506 91 90 ______
M7 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 109
Date foreseen for mandatory review
31.12.2019 31.12.2020 31.12.2021 31.12.2021 31.12.2022 31.12.2019 31.12.2022 31.12.2022 Supplementary unit — — — — — l l —
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) 0 % 0
2
protease (CAS RN 123175-82-6) use for in the manu
)
2
Achromobacter lyticus
and D-limonene (CAS RN 5989-27-5) content by with a polymeric but not % or more weight of 65 % more than 75 % by weight (CAS RN content of not more than 10 120-92-3) with a polymeric % 0,09 than — more an enzyme concentration of 6,0 U/ml or more, but not more than 7,4 U/ml, not of 26628-22-8) RN (CAS azide sodium of weight by concentration — a — a pH value of 6,5 or more, but not more than 8,5 in the solution or copper of nitroguanidine, nitrate binder nitrate and additives, used as a ( inflators airbag component of mm but or more not than 6,9 mm) mm (± 0,3 mm and a pin length of 6,68 than 25,25 mm) (± 0,3 mm mm but not more than 3,18 than 0,43 more facture of human ( and analogue insulin products Description Temporary wafer-bonding release in form of a suspension of a solid polymer in cyclopentanone in polymer solid a of suspension a of form with in solution release aqueous wafer-bonding of a suspension in the form of a solid polymer in Temporary wafer-bonding adhesive material in 37340-58-2) Temporary 9059-28-3) RN of RN (CAS Preparation (CAS amidinohydrolase 1-monooxygenase Creatine Salicylate shape, composed of strontium of cylindrical granulate of powder the form in Pyrotechnical maximum with an length of 20,34 mm or more but not overall gas generators more for Igniters Photosensitive consisting plate of a photopolymer layer on thickness a polyester foil of total of 60 70 10 20 30 10 10 20 TARIC CN code ex 3507 90 ex 3507 90 ex 3507 90 ex 3601 00 ex 3701 30 00 *ex 3506 91 90 *ex 3506 91 90 *ex 3603 00 60
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 110
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
0 % 0 )
2
coated with a photopolymer of a thickness 0,15 coated with a layer than 0,8 more but not mm or mm, mm of a total thickness not film, not more than covered with a release 1 resin, of a kind used goods for electron-sensitive of heading 8541 or 8542 — % of diazooxonaphthalenesulphonic acid ester by than 12 weight not more resins — phenolic or methyl 3- or ethyl lactate solution in a 2-methoxy-1-methylethyl acetate containing at least 2-heptanone methoxypropionate or resins acrylic or — phenolic — acid precursor, % by light sensitive weight of a maximum 2 ethyl lactate or in a solution containing acetate 2-methoxy-1-methylethyl and cyclohexanone not containing ethyl-3-ethoxy and whether or methoxy-1-methylethylacetate propionate Description Photomasks for photographically transferring circuit diagram patterns onto semiconductor wafers semiconductor onto ( patterns discs diagram silicon circuit of a kind printing plate, on substrate used newsprint, for Relief consisting of a metal of transferring sensitization photographically the for of chromium and or of glass, coated with a photosensitive covered with a film of quartz or Plate for Photomasks of: emulsion consisting Photosensitive emulsion Sensitising containing: emulsion Sensitising containing polymer, colour pigments, 2- based on photosensitive acrylic Preparation 30 10 10 10 15 25 30 TARIC CN code ex 3701 30 00 ex 3701 99 00 ex 3705 00 90 ex 3707 10 00 ex 3707 10 00 ex 3707 10 00 ex 3707 10 00
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 111
Date foreseen for mandatory review
31.12.2021 31.12.2021 31.12.2019 31.12.2019 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
hydroxystyrene derivatives, acetate, and/or propylene glycolmethylether — acrylate polymers, — acrylate polymers, — methacrylate polymers, styrene of — derivatives dissolved in an precursors, % of photosensitive acid than 7 containing by weight not more organic solvent containing 2-methoxy-1-methylethyl acetate at least esters, naphthoquinonediazide of weight by % 10 than more — not % by weight of copolymers hydroxystyrene — % or more but not than 35 2 — % by weight of epoxy-containing derivatives not more than 7 lactate ethyl and/or 1-ethoxy-2-propyl acetate dissolved in % by weight of xylene — and more but not than 75 % or more 55 % by weight of ethylbenzene — more but not than 18 % or more 12 — and and/or methacrylates % of copolymers acrylates but % or more not more than 45 20 ethyl lactate least containing at organic solvent % of but not more than 50 or more % — 25 acrylates, % of — % or more but not than 30 5 photoinitiator a of % 12 than more — not Description containing one emulsion of: or preparation Sensitising or more containing: containing: emulsion, polyisoprene Sensitising cyclized of consisting emulsion weight: Photosensitive by containing emulsion Photosensitive 35 40 45 50 TARIC CN code ex 3707 10 00 ex 3707 10 00 ex 3707 10 00 ex 3707 10 00
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 112
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2022 31.12.2021 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2 0 % 0
)
2
)
2
)
2 polyamide-precursor with unsaturated carbon in the side-chains which is convertible into a polyimide, in form of a solution from N-methyl-2-pyrrolidone or N-ethyl-2-pyrrolidone with a % or more polymer content by weight 10 magnetite or carbon either black, for use as a developer for in of the manufacture cartridges ( facsimile machines, computer printers or copiers process, for use as a developer machines, in computer for facsimile the manufacture of cartridges ( printers or copiers copolymer acrylate/butadiene — styrene pigment organic an or black carbon — either — whether or not containing polyolefin or amorphous silica facsimile for or cartridges bottles manufacturing of ink/toner filled a developer in the use as for ( and copiers printers machines, computer facture of cartridges for facsimile machines, computer printers or copiers ( or copiers machines, computer printers for facsimile of cartridges facture Description Dry ink powder or toner blend, consisting of a copolymer of styrene and butyl acrylate and acrylate butyl and styrene photopatternable of radically a copolymer of a consisting of stress, consisting mechanical blend, buffering toner coating, or Dielectric powder ink Dry of: consisting blend, Dry ink powder or toner blend, based on a polyol resin, for use as a developer in the manu toner polymerisation by a manufactured resin, polyester on a blend, based toner powder or ink Dry or 12777-87-6) powder RN ink CAS Dry and 90387-90-9 RN (CAS graphite Expandable 55 10 20 40 50 10 TARIC
CN code ex 3707 10 00 ex 3707 90 29 ex 3707 90 29 ex 3707 90 29 ex 3801 90 00 *ex 3707 90 29 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 113
Date foreseen for mandatory review
31.12.2022 31.12.2020 31.12.2018 31.12.2021 31.12.2018 Supplementary unit — — — — kg
duty 0 % 0 % 1,7 % Rate of autonomous /g,
2 0 % 0 m, μ 0 % 0 /g or more but not more than 4,36 m but not more than 4,36 /g or more
2
m or more but not more than 13,0 but not more more m or μ
) isomer, fixed on a support of silicon dioxide R
and — an average particle size of 10,8 of size particle average — an ppm, 40 than less of content iron — an ppm, 5 than less of content copper — a — a nickel content of less than 5 ppm, m 3,0 of atmosphere) (N2 area surface average — an of rosin resin, Phenolic modified derivative — % of rosin esters, but than % or more not more 75 containing by weight 50 25, than more not of value acid an — with of a kind used in printing offset — a magnetic metal impurity of less than 0,3 ppm 0,3 than less of impurity metal magnetic — a Description Pitch coated graphite based powder with: powder based graphite coated Pitch carbon and of activated polyethylene, Mixture of powder in form ( its and (ISO) Indoxacarb 10 60 20 10 oil Pine 10 TARIC
3805 90 10 3805 90 CN code ex 3806 90 00 ex 3802 10 00 ex 3909 40 00 ex 3808 91 90 *ex 3801 90 00 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 114
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2022 31.12.2020 31.12.2018 31.12.2018 31.12.2019 Supplementary unit — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous -ethoxy- ′
0 % 0 or, kurstaki
and
or, aizawai or, or, subsp. kurstaki israelensis aizawai tenebrionis -ethoxy- spinosyn L) ′ subsp. subsp. subsp. subsp.
)
1 Bacillus thuringiensis Berliner thuringiensis Bacillus thuringiensis Bacillus thuringiensis Bacillus thuringiensis Bacillus Bacillus thuringiensis Bacillus — — — — ( or more sale retail not put up for hymexazole (ISO), of or % of pyrithione zinc (INN), — more but not than 26 % or more 24 % of pyrithione zinc (INN) — more but not than 41 % or more 39 — (3 and 5,6-dihydro spinosyn J) Description Preparation containing endospores or spores and protein crystals derived from either: from derived crystals protein and spores or (3 endospores components containing spinosyn Preparation two of preparation (ISO) 935545-74-7), Spinosad RN (CAS (ISO) Spinetoram 14915-37-8) RN (CAS kg (CAS RN packings Mancozeb 8018-01-7) (ISO) of a content 500 imported in immediate pyrithione powder, of a containing by Fungicide in the form weight 65 than 75 more but not % or % copper on consisting of a suspension Preparation in containing of pyrithione water, by zinc (INN) weight: based Preparations 30 40 60 10 10 30 50 TARIC
CN code ex 3808 91 90 ex 3808 91 90 ex 3808 92 30 ex 3808 92 90 ex 3808 92 90 ex 3808 92 90 *ex 3808 91 90 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 115
Date foreseen for mandatory review
31.12.2019 31.12.2021 31.12.2019 31.12.2020 31.12.2020 31.12.2020 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
)
2
96 % and — and more of tepraloxydim (ISO) % or 30 — hydrocarbons consisting of aromatic of a petroleum fraction % not more than 70 A3, — % of Gibberellin or % or more but not than 41,2 38,8 A4 and % of Gibberellin — A7 % or more but not than 10,5 9,5 — % of benzyl(purin-6-yl)amine % or more but not than 2,00 1,88 of a kind used in plant growth regulators — % of sodium para-nitrophenolate, 1,8 — % of sodium ortho-nitrophenolate, 1,2 — % of sodium 5-nitroguaiacolate 0,6 ( for use in the manufacture of a plant growth regulator % of 1-methylcyclopropene with a purity more than % or more but not more than 3,6 — 3 Description Herbicide containing flazasulfuron (ISO) as an active ingredient active an as weight: (ISO) by flazasulfuron containing containing solution, Herbicide glycol a consisting of a suspension Preparation, containing of tepraloxydim (ISO), by weight: in benzyl(purin-6-yl)amine of weight: of granules, containing by in the form weight: Preparation, consisting by Preparation containing weight: solution by Aqueous containing powder white Mixed 10 40 10 20 30 40 TARIC
CN code ex 3808 93 23 ex 3808 93 27 ex 3808 93 90 ex 3808 93 90 ex 3808 93 90 ex 3808 93 90 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 116
Date foreseen for mandatory review
31.12.2020 31.12.2019 31.12.2020 31.12.2018 31.12.2018 31.12.2019 Supplementary unit — — — — — —
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0
5-dioxaphosphoran-5-ylmethyl) methylphos λ 5-dioxaphosphoran-5-ylmethyl methyl methylphos 5-dioxaphosphoran-5-ylmethyl methyl λ
0 % 0
)
2
methylpropene — A4, more of Gibberellin % or 55 A7, Gibberellin % of — % or more but not than 35 1 — A4 A7 and more of Gibberellin % or combined Gibberellin 90 — % of a combination of water and other naturally occurring Gibberellins not more than 10 of a kind used in plant growth regulators 118-52-5), RN (CAS — 1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione 77-48-5), RN (CAS — 1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione and 16079-88-2), RN (CAS — 1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione 126-06-7) RN (CAS — 1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione phonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2 phonate — 1-chloro-2-methylpropene and % of each impurity 3-chloro-2- containing than 0,05 less for use in the manufacture of a growth regulator of post-harvest fruits, vegetables and orna ( mentals with generator a specific Description Preparation in the form of powder, containing by weight: by containing powder, of form water the and in cyclohexanone Preparation of containing: solution 32718-18-6) a RN in (CAS 23135-22-0) Bromochloro-5,5-dimethylimidazolidine-2,4-dione RN 71751-41-2) (CAS RN (ISO) (CAS Oxamyl (ISO) 5-ethyl-2-methyl-2-oxo-1,3,2 Abamectin of Mixture consisting of oxydipropanol of a Defoamer, mixture and 2,5,8,11-tetramethyldodec-6-yn-5,8-diol 50 30 10 20 10 20 TARIC CN code ex 3808 94 20 ex 3808 99 90 ex 3808 99 90 ex 3809 91 00 ex 3809 92 00 ex 3808 93 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 117
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2018 31.12.2021 31.12.2020 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
) )
2 2
)
2
— 70 % or more, but not more than 90 % of tin — more, but not more than 90 % or 70 copper, bismuth, zinc, or indium of silver, one or more metals % of not more than 10 — ( for use in the electro technical industry hydrocarbon than: containing by solvent, weight not more aromatic an in manganese tricarbonyl — % of 1,2,4-trimethyl-benzene, 4,9 — % of naphthalene, and 4,9 — % of 1,3,5-trimethyl-benzene 0,5 78330-13-9), RN (CAS polyisobutylenephenol — o-amino oils, % by — weight of mineral % by weight but not more than 50 more than 30 ( oils lubricating additives for blends of of manufacture the used in 103650-95-9), RN (CAS pentaerythritol and acid succinic polyisobutenyl of — esters oils and % by weight of mineral — more but not than 55 % or more 35 — % by weight, content of not more than 0,05 with a chlorine ( oils lubricating additives for blends of of manufacture the used in Description containing by weight: and resin metals of mixture a consisting of or welding paste, Soldering by of methylcyclopentadienyl % weight than 63 % but not more Solution of more than 61 containing: inhibitor oxidation and of dinonylnaphthalenesulphonic Salts oils acid, in the form of a solution in mineral agent Dispersing containing: agent Dispersing 10 10 10 11 12 TARIC CN code ex 3810 10 00 ex 3811 19 00 ex 3811 21 00 ex 3811 21 00 ex 3811 21 00
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 118
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2018 31.12.2020 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
) )
2 2
)
2
)
2 amines with polyisobutenyl anhydride (CAS RN succinic 147880-09-9), alkylphenol) — borated magnesium (C16-C24) alkylbenzene sulphonates and sulphonates alkylbenzene (C16-C24) magnesium — borated oils, — mineral the use in 350, than than 250, for but not more more of number (TBN) base total having a ( manufacture of lubricating oils polyethylenepoly of products reaction from derived succinimide polyisobutene — containing oils, % by — weight of mineral % or more but not than 55 containing 35 %, 0,05 than more not of weight by content chlorine a — with 15, than less of number base total a — having ( oils lubricating additives for blends of of manufacture the used in 11059-65-7), RN (CAS dithiophosphate) bis(hydrogen bis[bis(tetrapropylenephenyl)] — zinc 597-82-0), RN (CAS thiophosphate — triphenyl and 101-02-0), RN (CAS phosphite — triphenyl oils, — mineral ( for use in the manufacture of lubricating oils — Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of oils and % by weight of mineral — more but not than 60 % or more 40 120 than more number base total a — having ( oils lubricating additives for blends of of manufacture the used in Description Additives containing: Additives agent: Dispersing of: consisting Additives, containing: Detergent 13 14 15 16 TARIC CN code ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 ex 3811 21 00
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 119
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2018 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2
lamide, of an average molecular weight (Mw) of more than 10 000 but not more than than 10 of more weight (Mw) molecular lamide, of an average 20 000, and — mainly sulphurized diisobutylene, sulphurized — mainly sulphonate, — calcium and succinate, polyisobutylene — dialkylaminoalkyl oils, — mineral ( for use in the manufacture of lubricating oils sulphonates, calcium alkyltoluene chain — long oils, and % by weight of mineral — % but not than 50 more more than 30 — having a total base number of more than 310 but not more than 340, ( oils lubricating additives for blends of of manufacture the used in and mixture, based succinimide polyisobutylene — a oils, % by weight of mineral — % but not than 50 more more than 30 ( oils of lubricating manufacture use in the than 40, for base number of more having total a of a solution oil in mineral — a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacry Description Additives containing: Additives form the containing: in Detergent compounds, molybdenum organic complex containing: on Additives based oils, lubricating for Additives containing: Additives 17 18 19 20 25 TARIC CN code ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 ex 3811 21 00
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 120
Date foreseen for mandatory review
31.12.2018 31.12.2022 31.12.2018 31.12.2018 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
) )
2 2
succinic anhydride and groups and 3-nitroaniline, with 4-(4-nitrophenylazo)aniline reacted and — 20 % or more by modified by % or more weight of an ethylene-propylene copolymer chemically 20 — oils, — mineral ( for use in the manufacture of lubricating oils products of polyisobutylene acid and substituted phenol formaldehyde, used with salicylic as a concentrated additive for the manufacture of engine oils through a blending process 84605-23-2), RN (CAS formaldehyde with products reaction heptylphenol of salts — calcium oils, — mineral the 40 than 100, use in of more than but not more for number (TBN) base having total a ( oils use in lubricating for oils or overbased detergents of lubricating manufacture 78330-13-9), RN (CAS polyisobutylenephenol — o-amino 84605-20-9), RN (CAS succinimide — polyisobutylene 68784-17-8), RN (CAS — alkenylimidazoline — more than 15 %, but not more than 30 % by weight of mineral oils, by % weight of mineral — %, but not more than 30 more than 15 ( for use in the manufacture of lubricating oils Description Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction of salts calcium of consisting containing: oils, Additives mineral containing oils, lubricating for Additives containing: Additives containing: Additives 27 30 33 35 TARIC
CN code ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 *ex 3811 21 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 121
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
) )
2 2
)
2
)
2 opropylmorpholine, and and and 3-nitroaniline, phenyl) aniline — a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by amin by modified alcohols, C4-C20 with esterified copolymer anhydride styrene-maleic — a copolymer, N-[3-(dimethylamino)propyl]methacrylamide and methacrylate alkyl (C8-18) — an copolymer, ethylene-propylene — an 4-(4-nitro anhydride, succinic with modified chemically copolymer ethylene-propylene — an and 231297-75-9) RN (CAS alkylbenzenesulphonates (C20-C24) magnesium — overbased oils, % of mineral — % but not more than 50 by than 25 weight more having base number a of more than 350, total but not more than 450, for use in the manufacture ( of lubricating oils — (CAS RN 36878-20-3 nonylated diphenylamine derivatives and CAS RN 27177-41-9), and oils, by % weight of mineral — %, but not more than 45 more than 30 ( for use in the manufacture of lubricating oils oils, % by weight of mineral — % but not than 75 more more than 50 ( for use in the manufacture of lubricating oils oils, % by weight of mineral — % but not than 30 more more than 15 whether or not pour containing point a methacrylic depressant polymer, for use in the manu ( facture of lubricating oils Description Additives containing: Additives containing: Additives containing: Additives 37 45 48 TARIC CN code ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 ______
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 122
Date foreseen for mandatory review
31.12.2022 31.12.2019 31.12.2019 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
) )
2 2 weight of 15 % or more, but not more than 30 % and % or more, but not more than 30 weight of 15 — based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0), RN (CAS alkylbenzenesulphonates C16-24 calcium on — based oils, mineral — containing used of engine as a additive for the manufacture concentrated oils through a blending process by content sulphonate a with 68783-96-0) (CAS sulphonates petroleum calcium — overbased oils, % of mineral — % but not more than 60 by than 40 weight more of manufacture in the use than 420, for more but not 280 or more number of base total having a ( lubricating oils and 75975-85-8) RN (CAS polypropylbenzenesulphonate calcium number base — low oils, % of mineral — % but not more than 60 by than 40 weight more of base number of more than 10 having total but not more than 25, a use in the manufacture for ( lubricating oils Description Additives for lubricating oils, lubricating for Additives containing: Additives containing: Additives 50 53 55 TARIC
CN code ex 3811 21 00 ex 3811 21 00 *ex 3811 21 00 ______
M8 M6 M7 M8 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 123
Date foreseen for mandatory review
31.12.2022 31.12.2019 31.12.2019 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
)
2
)
2 a content by weight of 25 % or more but not more than 35 %, but not than 35 % or more more a content by weight of 25 calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a % and % or more, but not than 25 more sulphonate total content by weight of 15 — based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with 75975-85-8) RN (CAS benzenesulphonate substituted polypropylenyl calcium on — based — base number (TBN) of 280 with a total or more but not than 320, used of engine as a additive for the manufacture concentrated oils through a blending process synthetic and 61789-86-4) RN (CAS sulphonates petroleum calcium of mixture overbased — an oils, % of mineral — % but not more than 60 by than 40 weight more of manufacture in the use than 320, for more but not 280 or more number of base total having a ( lubricating oils and 160610-76-4), RN (CAS mixture based succinimide polyisobutylene — a oils, % by weight of mineral — % but not than 50 more more than 35 having a sulphur content of more than 0,7 % but not than 1,3 more % by weight, having a total ( oils of lubricating base number use of more than 8, in the manufacture for Description Additives for lubricating oils, containing mineral oils, mineral containing oils, lubricating for Additives containing: Additives containing: Additives 60 63 65
TARIC CN code ex 3811 21 00 ex 3811 21 00 *ex 3811 21 00 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 124
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2020 31.12.2020 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2 amines with polyisobutenyl anhydride (CAS RN succinic 84605-20-9), — containing polyisobutylene succinimide derived from reaction products of polyethylenepoly of products reaction from derived succinimide polyisobutylene — containing oils, mineral — containing — %, more but not than 0,25 % or more content by with a chlorine weight of 0,05 20, than more of (TBN) number base total a — with used of engine as a additive for the manufacture concentrated oils through a blending process 134758-95-5), RN (CAS compounds succinimide — borated and oils, — mineral 40, than greater (TBN) number base total a — having ( for use in the manufacture of additive mixtures for lubricating oils dialkylbenzenesulfonates, (C10-C14) — Calcium oils, by % weight of mineral — %, but not more than 60 more than 40 of blends additives the manufacture than 10, use in not more base number for of with a total ( for lubricating oils and acrylate, ethyl and acrylate 2-ethylhexyl of copolymer — a oils % by weight of mineral — % but not than 80 more more than 50 ( for use in the manufacture of additive blends for lubricating oils Description Additives for lubricating oils, lubricating for Additives containing: Additives containing: Additives of: consisting additives Antifoam 70 73 75 77
TARIC CN code ex 3811 21 00 ex 3811 21 00 ex 3811 21 00 *ex 3811 21 00
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 125
Date foreseen for mandatory review
31.12.2020 31.12.2019 31.12.2022 31.12.2019 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2 butenyl succinic anhydride (CAS RN 84605-20-9), butenyl succinic carbonated, and hydrazine (CAS RN 93925-00-9) and solvent, — polyisobutylene aromatic polyamine succinimide, polyamine aromatic — polyisobutylene oils, % by weight of mineral — % but not than 60 more more than 40 % by weight, % but for use in the not more than 0,9 with a nitrogen content of more than 0,6 ( manufacture of additive blends for lubricating oils polyiso with polyethylenepolyamines of reaction from derived succinimide — polyisobutene oils, — % by weight of mineral % but not more than 43,3 containing more than 31,9 and chlorine, weight by % 0,05 than more — not 20, than greater (TBN) number base total a — having ( for use in the manufacture of additives blends for lubricating oils % by oils, weight of mineral % or more but not more than 45 — containing more than 20 — based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not a kind of used of blends oils in the manufacture of additives for lubricating disulphide carbon formaldehyde, with phenol heptyl branched of reaction the from — products % naphtha by petroleum weight of light aromatic % but not more than 28 — more than15 ( for use in the manufacture of lubricating oils Description Additives containing: Additives containing: Additives Additives, containing: Additives 80 83 85 15 TARIC
CN code ex 3811 21 00 ex 3811 21 00 ex 3811 29 00 *ex 3811 21 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 126
Date foreseen for mandatory review
31.12.2022 31.12.2019 31.12.2022 31.12.2019 31.12.2022 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2 hosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, C12-14 alkyl propylene oxide, phosphorus with with oxide, and amines hosphoric acid oils of lubricating used manufacture additive for the as a concentrated ( for use in the manufacture of lubricating oils boxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used concentrated a as additive for the manufacture of engine oils through a blending process ( manufacture of lubricating oils content sulphur monochloride and sodium RN chlorine 68511-50-2), sulphide (CAS a with additive for concentrated %, used as a than 0,5 but not more more % or by weight of 0,01 the manufacture of lubricating oils Description Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the in use for Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiop 68784-17-8), RN (CAS mixture amines and mono- and di-alkylphosphoric of primary acids, salts Additives containing at least based imidazoline an Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecar of consisting Additives with products oils, consisting Additives for lubricating of 2-methyl-prop-1-ene of reaction 20 25 30 35 40 TARIC
CN code ex 3811 29 00 ex 3811 29 00 *ex 3811 29 00 *ex 3811 29 00 *ex 3811 29 00 ______
M8 M6 M8 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 127
Date foreseen for mandatory review
31.12.2019 31.12.2022 31.12.2018 31.12.2020 31.12.2018 31.12.2021 Supplementary unit — )
— — — — —
2
duty 0 % 0 % 0 % 0 % 0 % 0 % ( 0 % Rate of autonomous
) )
2 2
-olefins and tall oil α
) -dialkyl -2-hydroxyacetamides with
2 N,N
)
2
)
2 RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of use in the manufacture for % by weight of the mixture, RN 1330-86-5) than 85 is more ( lubricating oils concen a RN 866259-61-2), (CAS used as atoms 12 and 18 carbon between lengths chain alkyl trated additive for the manufacture of engine oils through a blending process diisobutylene, sulphurized — mainly and sulphonate, — calcium succinate polyisobutylene — dialkylaminoalkyl ( for use in the manufacture of lubricating oils ( oils of lubricating use in the manufacture groups), for weight of oleyl, palmityl and stearyl ( (CAS RN 67124-09-8), of blends oils used of additives for lubricating in the manufacture fatty acids, with a sulphur content of 8 fatty but not than 12 % or more more % by use in weight, for ( oils lubricating of blends of additives for manufacture the Description Additives for lubricating oils, consisting of a mixture of mixture a by of % consisting 80 oils, Additives consisting of a mixture (C7-C9) dialkyl adipates, in which (CAS diisooctyl adipate than lubricating more for contain Additives groups alkyl containing: the Additives which (in dialkylphosphites of Additives consisting consisting of a sulphurised of vegetable oil, long mixture chain Additives Oxidation inhibitor mainly containing a mixture of isomers 1-(tert-dodecylthio)propan-2-ol 45 50 60 65 70 75 TARIC
CN code ex 3811 29 00 ex 3811 29 00 ex 3811 29 00 ex 3811 29 00 ex 3811 29 00 *ex 3811 29 00 ______
M8 M6 M7 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 128
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2022 31.12.2021 31.12.2021 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2 0 % 0
)
0 % 0
2
)
2 -nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347- tert -nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN tert 09-1), and 97503-12-3), — % by weight of 2,5-bis( more than 70 5-( of weight by % 15 than — more ( for use in the manufacture of lubricating oils ( C10-rich (CAS RN 398141-87-2), use in oils for of lubricating the manufacture % of 2-ethylhexanol but % or more not more than 29,9 weight 20 and acid succinic — polyisobutenyl oils % by weight of mineral — % and not than 20 more more than 5 ( of blends use in the manufacture of additives for fuels for Description Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by solution containing: containing oil Additives succinimide, mineral polyisobutenyl a on in based salt, salt acid Additives ammonium consisting of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, of a mixture Dinonylnaphthylsulphonic quaternary a 102-06-7) of RN Solution (CAS containing: granules inhibitor guanidine Corrosion diphenyl on based accelerator Rubber 80 85 10 40 50 10 TARIC
CN code ex 3811 29 00 ex 3811 29 00 ex 3811 90 00 ex 3811 90 00 ex 3812 10 00 *ex 3811 90 00 ______
M8 M7 M6 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 129
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 - -[3- ω ω
-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- -[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- 75-0) α 104810-48-2); RN hydroxypoly(oxy-1,2-ethanediyl) (CAS α (oxy- [3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly 1,2-ethanediyl) (CAS RN 104810-47-1); (CAS RN 86403-32-9) — bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2) RN (CAS dicarboxylate — bis(2-ethylhexyl)-1,4-benzene — % more than but not % by 10 more than (CAS weight 60 RN of dibutylterephthalate 1962- % of bisphenol A more than (CAS 3 RN 96152-48-6) — — 25322-68-3) RN (CAS 300 of (Mw) weight molecular average — weight a of glycol polyethylene and 41556-26-7), RN (CAS (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate — bis 82919-37-7) RN (CAS sebacate piperidyl — methyl-1,2,2,6,6-pentamethyl-4- % of 2-(2-methoxyethoxy)ethanol and not than 70 more perchlorate — esters of C15-18 % of a mixture but % or more tetramethylpiperidinyl not more than 50 25 — of other organic compounds % not more than 20 9003-07-0) RN (CAS polypropylene of carrier a — on Description Plasticiser, containing: Plasticiser, sebacate bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) predominantly containing: containing 4,4'-Isopropylidenediphenol C12-15 alcohol phosphite containing by weight 1 % or more but not stabiliser Mixture photo UV weight: by containing of sodium % than 40 but not more or more % Compound containing by 15 weight stabilisers Mixture 10 10 20 25 30 35 TARIC CN code ex 3812 20 90 ex 3812 39 10 ex 3812 39 90 ex 3812 39 90 ex 3812 39 90 ex 3812 39 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 130
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2021 31.12.2021 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
stannatetradecanoate, and oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate and dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) or (4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7) 57583-35-4), dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and 127519-17-9), and RN (CAS benzenepropanoic acid — 80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4- 2-ethylhexyl of by weight %) 10 (± % — 80 % — 20 (± %) 10 by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2- (CAS — 2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol RN 2725-22-6) — either N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6- 2,4- with polymer — N,N’-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, — 2-ethylhexyl (CAS 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate RN — 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5- 7659-86-1) RN (CAS mercaptoacetate — 2-ethylhexyl of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxy alkyl esters — branched and linear 108-65-6) RN (CAS acetate — 1-methoxy-2-propyl Description Mixture of: Mixture containing: UV-stabilizer, containing: material plastic for Stabiliser containing: stabiliser Light 40 55 65 70 TARIC CN code ex 3812 39 90 ex 3812 39 90 ex 3812 39 90 ex 3812 39 90 ______
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 131
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2018 31.12.2018 31.12.2021 31.12.2021 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous /g or more (as
3
-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer ′ N,N
with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) and with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine — a hindered amine: hindered — a % of 1-methoxypropan-2-ol, — more but not than 71 % or more 69 % of 2-methoxy-1-methylethyl acetate — more but not than 31 % or more 29 ethyl ether or % by weight 8 oxide support and containing on an aluminium silver consisting of mm, 10 % more but of silver not more than 40 cm on dioxide chromium, fixed support a silicon with a pore volume of 2 1333-82-0), RN (CAS trioxide — chromium 1308-38-9), RN (CAS trioxide — dichromium aluminium oxide (CAS RN 1344-28-1) support of on a determined by the nitrogen absorption method) — either an o-hydroxyphenyl triazine UV light absorber or absorber light UV triazine o-hydroxyphenyl an — either compound phenolic modified chemically — a Description UV-stabilizer, consisting of: nonafluorobutyl consisting and/or UV-stabilizer, ether methyl weight: nonafluorobutyl by of containing isomers Mixture containing mixtures Azeotrope mm or more but not than more of 3 of granules or rings a diameter Catalyst, in the form of: consisting compounds Catalysts of chromium trioxide, dichromium or organometallic trioxide of consisting Catalyst 80 20 40 10 10 13
TARIC CN code ex 3814 00 90 ex 3814 00 90 ex 3815 12 00 ex 3815 19 90 ex 3815 19 90 *ex 3812 39 90
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 132
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
2
)
2
)
2
)
2 dioxide and/or aluminium oxide, silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, but % or more not more than 40 dioxide, silicon containing by weight 20 ( acrylonitrile of manufacture the use in for together, evaluated bismuth and iron spheres, solid of form the — in mm, and — but mm or more not more than 12 of 4 of a diameter — of molybdenum consisting of a mixture oxide oxides, and metal supported other on silicon ( for use in the acid manufacture of acrylic oxides consisting of a mixture metal containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use of in acrylic the manufacture aldehyde ( ( manufacture of polypropylene dioxide silicon support of dioxide silicon support of dioxide, support of a suspension of silicon oil in the form in mineral on a support of silicon dioxide, in the form of powder Description Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the in use for a Catalyst, in the form of a powder, consisting of a oxides mixture of metal fixed on a support of dichloride, on Catalyst, magnesium fixed on zirconium, supported and aluminium tetrachloride of titanium mm, mm or more but not more than 9 in of 4,2 the form of Catalyst spheres of a diameter compounds containing organo-metallic Catalyst of consisting consisting bonded of phosphoric Catalyst acid chemically to a support of silicon dioxide Catalyst compounds consisting of organo-metallic Catalyst of aluminium and chromium, fixed on a compounds consisting Catalyst of organo-metallic of magnesium and titanium, fixed on a compounds consisting Catalyst of organo-metallic of aluminium, magnesium and titanium, fixed 15 20 25 30 65 70 75 80 85 TARIC CN code ex 3815 19 90 ex 3815 19 90 ex 3815 19 90 ex 3815 19 90 ex 3815 19 90 ex 3815 19 90 ex 3815 19 90 ex 3815 19 90 ex 3815 19 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 133
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2022 31.12.2022 31.12.2018 31.12.2022 31.12.2020 Supplementary unit — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)-, ′ O k O, k 0 % 0 )
2 -(ethanoato- μ -oxo- μ
)ethane-di-
7 N k ,
0 % 0
4 N k ,
1 N k
)
2
-1,4,7-triazonine-1-yl- H di[chloride(1-)],(CAS RN 1217890-37-3) used to accelerate chemical oxidation or bleaching manufacture of polyolefins ( manufacture of polyolefins ( batteries) aid (hearing batteries button cell zinc air for Cathode, in rolls, dimethyl-1 containing by weight: and % of titanium — more but not than 30 % or more 20 % of chlorine — more but not than 72 % or more 55 %) silicon dioxide (± 1 and chloride; titanium(III) and chloride magnesium of complexes — tetrahydrofuran dioxide — silicon — containing 6,6 % (± 0,6 %) by weight of magnesium, and — containing 2,3 % (± 0,2 %) by weight of titanium Description Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the in use for dichloride, magnesium on % supported 5 tetrachloride 1,2-bis(octahydro-4,7- and titanium (1+)], dioxide containing di[manganese titanium of Catalyst %) urea ingredient 1 dimethylaminopropyl active (± on an % based with 95 Initiator catalyst of Oxidation weight of: by oil consisting mineral form in and aluminium chloride, trichloride of titanium mixture consisting of a powder in form, Catalyst, powder suspension in a Catalyst of consisting Catalyst, 87 10 86 16 18 20 22 30 TARIC
CN code ex 3815 19 90 ex 3815 90 ex 3815 90 *ex 3815 19 90 *ex 8506 90 00 *ex 3815 90 *ex 3815 90 *ex 3815 90 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 134
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2020 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
12 mm hydrocarbon chains, containing 12 – 56 carbon atoms carbon 56 12 – containing hydrocarbon chains, matrix, dioxide silicon a in oxides metal other and oxide molybdenum — containing mm or more but not more than — in solids the form of hollow of a length cylindrical of 4 ( for use in the acid manufacture of acrylic % or more but not more 9 material, containing by weight, in the hexane- or heptane-free % of titanium than 30 dipropylene glycols isobutanol solution in methylethyl)trimethylammonium 2-ethylhexanoate Description Catalyst, consisting of a mixture of different alkylnaphthalene sulphonic acids, with aliphatic with acids, sulphonic alkylnaphthalene different of mixture a of consisting Catalyst, and Catalyst: formate (2-hydroxypropyl)trimethylammonium of mixture a of suspension heptane a in hexane or of form in the trichloride, containing titanium Catalyst consisting Catalyst, consisting predominantly Catalyst of dinonylnaphthalenedisulphonic acid in the form of a % of (2-hydroxy-1- more but not than 79 % or containing by 69 Catalyst, weight 33 40 50 70 80 81 TARIC
CN code ex 3815 90 ex 3815 90 ex 3815 90 ex 3815 90 ex 3815 90 ex 3815 90 ______
M7 M6 M8 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 135
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2018 31.12.2021 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2 0 % 0
transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins ( hydrocarbons of olefins or for the oligomerization of alkylaromatic transalkylation of disodium % oxides and metal less than 1 % of rare-earth than 3 more but not % or 2 oxide basis: and hexane-free an oil- titanium and % of — % or more but not than 10 4 — 10 % or more but not more than 20 % magnesium ( in the production by the hydration of acrylamide catalyst of acrylonitrile for use as a in water, % of eicosylbenzene, — more but not than 60 % or more 35 % of docosylbenzene, — more but not than 50 % or more 25 tetracosylbenzene % of — % or more but not than 25 5 % of hexadecylnaphthalene — more but not than 98 % or more 88 dihexadecylnaphthalene % of — % or more but not than 12 2 Description Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on weight by or containing gel chloride, polyacrylamide magnesium a and in tetrachloride hydrocarbons, for the alkylation of aromatic Catalyst based for the on (zeolite), aluminosilicate suspended titanium enzymes, of weight: containing containing by weight (zeolite), in form of rodlets, consisting an aluminosilicate Catalyst, the consisting by bacteria, Catalyst, containing J1 (C14-26) rhodocrous benzenes alkylbenzenes weight: Rhodococcus dodecyl of by containing Mixture containing mainly alkylnaphthalenes, benzenes of alkyl Mixture branched of Mixture 85 86 88 89 10 10 20
TARIC CN code ex 3815 90 ex 3815 90 ex 3815 90 ex 3817 00 50 ex 3817 00 80 ex 3817 00 80 *ex 3815 90
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 136
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
) )
2 2
56 carbon atoms acid content 80 whether or not hydrogenated, fatty with free acid distillate, fatty % or more Palm for use in the manufacture of: 3823, heading of acids fatty monocarboxylic — industrial 3823, heading of acid — stearic 2915, heading of acid — stearic or 2915, heading of acid — palmitic ( 2309 heading of preparations feed — animal Palm acid oils from refining for use in the of: manufacture 3823, heading of acids fatty monocarboxylic — industrial 3823, heading of acid — stearic 2915, heading of acid — stearic or 2915, heading of acid — palmitic ( 2309 heading of preparations feed — animal % of sodium evaluated as sodium oxide, of rodlets in the form than not more 11 Description Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 12 from varying chain-length a of ester chains, phosphate aliphatic on with based modified fluid alkylnaphthalenes, hydraulic Mixed resistant Fire of the Y zeolite type) in the sodium containing form, by weight (artificial Acid aluminosilicate 20 20 30 30 30 20 10 TARIC
CN code ex 3823 19 30 ex 3823 19 90 ex 3817 00 80 ex 3819 00 ex 3823 19 30 ex 3823 19 90 ex 3824 99 15 ______
M7 M8 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 137
Date foreseen for mandatory review
31.12.2020 31.12.2021 31.12.2022 31.12.2021 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
RN 64742-94-5) RN 111850-24-9), and propan-2-ol (CAS % of diethyl carbonate — RN 105-58-8) more but not than 50 % or more 25 (CAS RN % of ethylene carbonate 96-49-1) — more but not than 50 % or more 25 RN 21324-40-3) (CAS — hexafluorophosphate 20 % of lithium than more not but 10 more % or (CAS RN ethyl methyl carbonate 623-53-0) % of — % or more but not than 10 5 (CAS RN % of vinylene carbonate 872-36-6) — % or more but not than 2 1 — 1 but % or more not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8) — % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9) Not more than 1 — 60 (CAS than 75 or more but not heavy aromatic % of Solvent naphtha (petroleum), % — 15 % or more but not more than (CAS 25 % of 4-(4-nitrophenylazo)-2,6-di-sec-butyl-phenol % of 2-sec-butylphenol (CAS RN 89-72-5) — more but not than 15 % or more 10 solvent Description Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and ethanol in dissolved 109037-78-7), RN (CAS titanium(IV) of complexes Butylphosphato weight: by containing Preparation weight: by containing organic Preparation an in 675126-28-0) RN (CAS 4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile 23 25 26 27 TARIC
CN code ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 *ex 3824 99 92 ______
M7 M8 M7 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 138
Date foreseen for mandatory review
31.12.2020 31.12.2020 31.12.2021 31.12.2019 31.12.2018 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
namine (CAS RN 658066-44-5), and hydroxy-3-methoxyphenyl) acrylate, — 10 % or more but not more than 42 % of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)etha % of sulphuric acid (CAS RN — 7664-93-9) and more but not than 25 % or more 10 % of methanol (CAS — RN 67-56-1) % or more but not than 2,9 0,5 — % of polyethylene % or more but glycol ether of butyl not 2-cyano more than 99 3-(4- 85 polyoxyethylene % of sorbitan trioleate — (20) % or more but not than 15 1 (CAS RN 3495-36-1), caesium formate % of — % or more but not than 84 1 (CAS RN 590-24-1), potassium formate and % of — % or more but not than 76 1 — % of additives whether or not containing not more than 9 % of divinylbenzene (CAS RN 1321-74-0) more but not than 85 or more of dinonylnaphthalenesulphonic consisting of salts preparations acid, either: Anti-corrosion — on wax, whether or not modified chemically, a support of mineral — of a solution in an in the form solvent organic Description Aqueous solution containing by weight by weight: containing by solution containing Aqueous weight: formate by potassium containing and % Preparation formate 56 caesium weight of by solution containing Aqueous ethylvinylbenzene-isomers, and divinylbenzene-isomers of Mixture 33 40 40 28 29 30 32 TARIC CN code ex 3824 99 92 ex 3824 99 93 ex 3824 99 92 ex 3824 99 92 ex 3824 99 96 *ex 3824 99 92 *ex 3824 99 92
M8 M7 M6 M7 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 139
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2021 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2018 Supplementary unit — — — — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0 0 % 0
-butyrolactone and quaternary ammonium salts, for the
γ
)
2 -glucitol and also containing carboxylic acid derivatives D -(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in α
-(4-methylbenzylidene)- bis-O
1,3:2,4- sulphate and an alkyl % more than 90 ( manufacture of capacitors electrolytic toluene Description Oligomer of tetrafluoroethylene, having one iodoethyl end-group iodoethyl one having tetrafluoroethylene, of oil Oligomer mineral in dissolved phenate, of by weight % 96,5 than more but not or more % 92 than containing not less Preparations phosphonate Calcium % or more but not of 3-butylene-1,2-diol with a content by weight of 65 of acetates Mixture % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol containing not less than 47 Preparation tetrahydro- of (CAS RN 70258-18-3) diluent organic in 2-chloro-5-(chloromethyl)-pyridine Solution of Preparation of predominantly consisting Preparation 34 35 36 37 39 40 42 45 TARIC
CN code ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 *ex 3824 99 92 *ex 3824 99 92 ______
M8 M6 M8 M7 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 140
Date foreseen for mandatory review
31.12.2020 31.12.2022 31.12.2022 31.12.2022 31.12.2018 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0
)
2
)
2 -butyrolactone, γ — trioctylphosphine oxide (CAS RN 78-50-2), RN (CAS oxide — trioctylphosphine 31160-66-4), RN (CAS oxide — dioctylhexylphosphine and 31160-64-2) RN (CAS oxide — octyldihexylphosphine 3084-48-8) RN (CAS oxide — trihexylphosphine ( spectacle lenses of boric acid ester % of glycerol % or more but not than 50 and 40 crylate water, ammonia and acid dodecandioic glycol, diethylene — either N,N-dimethylformamide, — or — or oxide, silicon — or azelate, hydrogen ammonium — or oxide, silicon and azelate hydrogen ammonium — or oxide, silicon and water ammonia acid, dodecandioic — or ( capacitors for the manufacture of electrolytic Description Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of manufacture the in use 169117-72-0) for RN absorber, Diethylmethoxyborane (CAS RN 7397-46-8) of a solution in tetrahydrofuran in the form (CAS UV containing: ethoxylate a Preparation, 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol containing on also based preparation, and: Preparation carbonate-based glycol ethylene Alkyl of predominantly consisting 2-hydroxyethyl % of metha than 50 but not more % or more containing by weight 40 Mixture Preparations 46 47 49 50 51 53 TARIC
CN code ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 *ex 3824 99 92 *ex 3824 99 92 *ex 3824 99 92 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 141
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2019 31.12.2019 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2021 Supplementary unit — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
-dimethylformamide, containing by N , N
-dimethyl)aminobenzoate with an average polymer chain length of
p with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS with 4-(1,1-dimethylpropyl) phenol RN and copolymers of styrene-allyl 84605-27-6), and propylphenyl)methylene]-nonitol chain length of less than 5 monomer units (CAS RN 813452-37-8) — of phosphoric anhydride the reaction of phosphoric obtained from acid of esters a mixture % by weight of isobutyl — alcohol more but not than 35 % or more 30 than 5 monomer units less length of % 37 at dichloromethane solution of % of 3',4’,5'-trifluorobiphenyl-2-amine % or more but not than 90 80 % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4- % or more but not more than 98,9 89 — % of colourants — % or more but not than 1 0,1 fluoropolymers % of — % or more but not than 10 1 less than 5 monomer units % of 2-hydroxybenzonitrile but % or more not more than 55 weight 45 Description Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer average an containing: with coatings, bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] chain and glycol) polymer paints Poly(tetramethylene average for an in Additives with solution bis[(2-benzoyl-phenoxy)acetate] a glycol) of bis( Poly(tetramethylene form glycol) the Poly(ethylene in a 2-Hydroxybenzonitrile, in anhydride (CAS RN 865-47-4) form of a solution Potassium tert-butanolate in the in tetrahydrofuran N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy weight: by containing a solution in toluene containing by of weight form in the 3',4’,5'-Trifluorobiphenyl-2-amine, Preparation 54 55 56 57 58 59 60 61 64 TARIC CN code ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ex 3824 99 92
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 142
Date foreseen for mandatory review
31.12.2019 31.12.2020 31.12.2020 31.12.2019 31.12.2018 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
0 % 0 -(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4- ω -alkylamines tert 1404190-37-9), 5945-33-5) -(2,4,6-Tribromophenyl)- — 20 % — 20 (± %) 1 ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN Dissolved in: 89-72-5) RN (CAS 2-sec-Butylphenol %) 5 (± % — 10 and 64742-94-5) RN (CAS aromatic heavy (petroleum), naphtha Solvent %) 7 %(± — 64 91-20-3) RN (CAS Naphthalene %) 1,0 (± % — 6 % of Bisphenol-A — bis(diphenyl phosphate) (CAS % or more RN but not more than 92 80 — 7 % or more but not than 20 more % oligomers of Bisphenol-A bis(diphenyl phosphate) and 115-86-6) RN (CAS phosphate triphenyl % 1 than more — not 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine α phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] Description Mixture of primary weight: of by Mixture containing Preparation weight: by containing Preparation 404362-22-7) RN (CAS derivatives of %) 10 and 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine 20 % (± %) of 10 % (± of 80 Mixture N-(2-Phenylethyl)-1,3-benzenedimethanamine 65 68 69 70 72 73 TARIC
CN code ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ______
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 143
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2022 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
-hydroxy-3-phenoxy-benzeneace α
acrylic acid) tonitrile (CAS RN 61826-76-4) and 93571-82-5) of: consisting ammonia and polymers of Aqueous solution — % by weight of ammonia (CAS RN 1336-21-6) and % or more but not than more 0,5 0,1 polymers of by weight of polycarboxylate (linear % than 10 but not more % or more — 0,3 — % by weight of (S)- % or more but not more than 90 74 in of % mixtures of lithium perchlorate % or more but not more than 10 ophosphate or 5 organic solvents glycol (CAS RN 111-46-6) diethylene dissolved in aluminium chelates, %) by weight of bis-alkoxylated ethyl acetoacetate — 2 % (± 50 solvent mineral) (white oil ink an — in with a boiling point of 160 °C or more but not than 180 °C — 10 % or more but not more than 26 % by weight of toluene (CAS RN 108-88-3) — more but not than 26 % or more 10 Description C6-24 and C16-18-Unsaturated fatty acid esters with sucrose (sucrose polysoyate) (CAS RN (CAS polysoyate) (sucrose sucrose with esters acid fatty C16-18-Unsaturated and C6-24 68784-48-5) RN containing: (CAS Preparation complexes titanate triethanolamine glycol % of lithiumfluor % or more but not more containing than 20 by 10 Preparation weight either propylene glycol Diethylene of: consisting Preparation 75 87 74 76 78 80 81 TARIC
CN code ex 3824 99 92 ex 3824 99 92 ex 3906 90 ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 *ex 3824 99 92 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 144
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2020 31.12.2018 31.12.2019 Supplementary unit — — — — —
duty 0 % 0 % Rate of autonomous 0 % 0
0 % 0 0 % 0
-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7), and tert (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of more % or whether or not containing by a synthetic rubber, weight 7 (dicyclopentadiene), tricyclopentadiene, and: compound, aluminium-alkyl an — either — or an organic complex of tungsten — or an organic complex of molybdenum — (CAS RN 14643-87-9), more of zinc diacrylate % or 85 2,6-di- of % 5 than more — not — not more than 10 % of zinc stearate (CAS RN 557-05-1) RN (CAS stearate zinc of % 10 than more — not Description T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene in solution 18162-48-6) RN (CAS dimethylsilane T-butylchloride % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene consisting by Preparation weight of 83 weight: hydroxyethylated by 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, containing Mixture Powder more % or of chlorination 70 with a level Paraffin 82 84 88 30 35 TARIC
CN code ex 3824 99 92 ex 3824 99 92 ex 3824 99 92 ex 3824 99 93 *ex 3824 99 93 ______
M8 M6 M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 145
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2021 31.12.2018 31.12.2021 31.12.2022 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
20-6) and dicarbamate and and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea dicarbamate weight: and sulphate, disodium of % 20 than more — not chloride sodium of % 10 than more — not (CAS RN 1310-58-3) di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder (CAS RN 79815- acid (S)-indoline-2-carboxylic % of — than 90 but not more or more, % 70 % of o-chlorocinnamic acid (CAS RN 3752-25-8) % or more, but not more than 30 — 10 — more of sterols, % or 75 stanols, of % 25 than more — not ( esters or stanol/sterol of stanols/sterols use in the manufacture for Description Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6- of by weight diphenyltoluene-2,4- containing by 4681-22-5) bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, % RN of 2,5 (CAS Mixture than 3-aminonaphthalene-1,5-disulphonate more hydrogen not Sodium containing 13189-00-9), RN (CAS weight dimethacrylate potassium (CAS RN 55589-62-3) and potassium hydroxide acesulfame consisting of Preparation, by Zinc containing Mixture of phytosterols, not in the form powder, containing Mixture by weight: 42 45 50 53 55 63 TARIC
CN code ex 3824 99 93 ex 3824 99 93 ex 3824 99 93 ex 3824 99 93 ex 3824 99 93 *ex 3824 99 93 ______
M7 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 146
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2019 31.12.2019 31.12.2018 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
-azodi(formamide) occurs at 135 °C ′
)
2
-azodi(formamide) (CAS RN 123-77-3), ′ chloroethane) % of stanols and not more than 4 sterols or titanium oxides of either combined with calcium or barium oxides of containing Film zirconium, in an binding acrylic material Preparation containing: — C,C and 1309-48-4) RN (CAS oxide — magnesium 24345-02-6) RN (CAS sulphinate) bis(p-toluene — zinc C,C from in which the gas formation Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample prep ( aration cartridges Description Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1'-oxybis(2- and sulfone bis(4-hydroxyphenyl) of end-groups consisting tetrafluoroiodoethyl product, having reaction tetrafluoroethylene, Oligomeric of Oligomer and of phytosterols, in form of flakes balls, containing Mixture % or more the by weight 80 80 83 85 67 85 57 70 73 75 TARIC
CN code ex 3824 99 93 ex 3824 99 93 ex 3824 99 93 ex 3824 99 93 ex 3824 99 93 ex 3824 99 96 ex 3824 99 96 *ex 3824 99 93 *ex 3824 99 96 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 147
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2019 31.12.2022 31.12.2020 Supplementary unit — — — — kg
duty 0 % 0 % 0 % Rate of autonomous
m, 0 % 0 0 % 0 μ powder, containing by weight: % of sitosterols, — more, but not more than 80 % or 60 campesterols, of % 15 than more — not — and % of stigmasterols not more than 5 betasitostanols of % 15 than more — not 10 than less of size particle — a % 98 than more of weight by purity — a % of iron(III)oxide, — more but not than 76 % or more 52 % of manganese oxide, — and more but not than 42 % or more 13 zinc oxide % of — % or more but not than 22 2 Description Lithium nickel cobalt aluminum oxide powder (CAS RN 177997-13-6) with: of form the in oil), (tall oils wood based wood and from derived phytosterols 177997-13-6) of Mixture RN grade) (CAS (refractory phosphate powder bauxite alumina oxide Calcined silica aluminum Structured weight: cobalt by nickel containing Lithium granulate, ferrite zinc Manganese 88 35 37 45 46 TARIC
CN code ex 3824 99 96 ex 3824 99 96 ex 3824 99 96 *ex 3824 99 96 *ex 3824 99 93 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 148
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2022 31.12.2018 31.12.2021 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
)
2
)
2 ), calcium oxide (CAS stabilised RN 68937-53-1) with a zirconium oxide
2 — either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium, % or more barium, neodymium more of % or or magnesium and 15 — 5 either % or more of niobium, — or more of lead and % 5 or 30 in the manufacture materials use as dielectric or for films use of dielectric in the manufacture for ( capacitors ceramic of multilayer accumulators for electrodes positive produce to used kind a hydroxide, of cobalt hydroxide and 1309-37-1) RN (CAS oxide) (Iron — ferrite 1344-43-0) RN (CAS oxide — manganese 1309-48-4) RN (CAS oxide — magnesium copolymer acrylate — styrene to be mixed with the toner powder, bottles or cartridges in the manufacturing of ink/toner filled ( machines, for facsimile computer printers and copiers content by weight of 92 % or more but not more than 97 % % or more but not than 97 content by weight of 92 Description Mixed metals oxides, in the form of powder, containing by weight: by containing powder, of form the in oxides, metals Mixed (ZrO oxide Zirconium of: consisting form, % by weight of zinc % or more but not more than 18 Nickel hydroxide, doped with 12 powder in Carrier dichromium trioxide % or more of Fused magnesia containing by weight 15 47 48 50 55 60 TARIC
CN code ex 3824 99 96 ex 3824 99 96 ex 3824 99 96 ex 3824 99 96 *ex 3824 99 96 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 149
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2021 31.12.2019 31.12.2021 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
aluminates, at least 75 % by weight of which consists of fractions with a grain size of % by with a grain size weight of which fractions consists of 75 at least aluminates, mm size of 0-1 with a grain % consists of fractions mm and at most 25 1-3 — 52 % (± 10 %) of cuprous oxide — (CAS RN 1317-39-1), 10 % (± 52 oxide %) of cupric (CAS RN — 1317-38-0) and 10 % (± 38 7440-50-8) RN (CAS copper metallic of %) 5 (± % — 10 mm, — mm or more but not than 3,4 1,6 either mm — mm or more but not than 6 or 4 (CAS RN 14807-96-6) % of talc — more but not than 51 % or more 28 — (CAS RN dioxide % of silicon 14808-60-7) (quartz) % or more but not more than 48 30,5 % of aluminium oxide (CAS RN — 1344-28-1) more but not than 26 % or more 17 molybdenum % of — oxide, % or more but not than 40 1 oxide, % of nickel — more but not than 50 % or more 10 % of tungsten oxide — more but not than 70 % or more 30 structure, crystalline a — with — phases and silicate of and with admixtures spinel fused magnesia-alumina content of with a Description Aluminium sodium silicate, in the form of spheres of a diameter of: diameter a of spheres of of weight form by the containing in Catalyst silicate, sodium Aluminium weight: by containing Powder weight: by containing product, Reaction composition: non-stoichiometric a with Mixture 63 65 70 73 74 TARIC CN code ex 3824 99 96 ex 3824 99 96 ex 3824 99 96 ex 3824 99 96 ex 3824 99 96
M7 M6 M7 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 150
31.12.2018 Date foreseen for mandatory review
31.12.2019 31.12.2021 31.12.2022
3 Supplementary unit m — — —
duty 0 % 0 % 0 % Rate of autonomous
0 % 0
)
2
,
3
2530-83-8) the following characteristics: — a melting point of between 1 600 °C g/cm and 0,8 - 1 800 0,6 °C, of density — a — 64 or more, but than 74 % not more % by (CAS RN weight of amorphous 7631-86-9) silica % by weight of butanone (CAS RN 78-93-3) and % or more, but not more than 35 — 25 % by — not weight more of than 3-(2,3-epoxypropoxy)propyltrimethoxysilane 1 (CAS RN 1344-28-1), containing by weight: % of platinum, and — % or more but not than 1 0,1 dichloride (CAS RN % of ethylaluminium 563-43-9) but not more than 5 % or more — 0,5 for use in the manufacture of particle filters in motor vehicles ( in motor vehicles filters of particle use in the manufacture for Description Preparation, consisting of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and silicon dioxide silicon and 2,4,7,9-tetramethyldec-5-yne-4,7-diol with % amorphous aluminosilicate, containing 65-80 Hollow spheres of fused aluminosilicate of consisting Preparation, of: consisting Mixture RN oxide (CAS aluminium porous support of a on RN 12035-82-4) oxide (CAS fixed Platinum 75 77 80 87 TARIC
CN code ex 3824 99 96 ex 3824 99 96 ex 3824 99 96 *ex 3824 99 96 ______
M8 M7 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 151
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2019 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous and
3
)
2
)
2
or more, but not more than 0,926 g/cm than 0,926 but not more or more,
3
)
2 and Mixture of fatty acid methyl esters containing Mixture of acid fatty methyl esters by weight at least: % of C12 — FAME, more but not than 75 % or more 65 % of C14 — FAME, more but not than 28 % or more 21 % of C16 FAME, — % or more but not than 8 4 ( for use in the manufacture of detergents and home and personal care products containing Mixture of acid fatty methyl esters by weight at least: % of C8-FAME — more but not than 58 % or more 50 % of C10-FAME — more but not than 50 % or more 35 for use in the manufacture of chemistry, (animal and agricultural human) food ingredients, ( additives to components lubricant, solvents, lamp oil and firelighter containing Mixture of acid fatty methyl esters by weight at least: % of C16 — FAME more but not than 32 % or more 15 % of C18 — FAME more but not than 85 % or more 65 and home and personal cleaning products, agricultural of detergents manufacture use in the for chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and ( firelighter components of (CAS RN 25087-34-7) low density polyethylene-1-butene/LLDPE in form linear High flow powder, with min g/10 24 than more not but more, or min g/10 16 of kg) 190 °C/2,16 (MFR — rate flow a melt g/cm 0,922 of 1505) D (ASTM density — a — a vicat softening temperature of min. 94 °C 94 min. of temperature softening vicat — a Description
20 30 40 20 29 39 49 50
TARIC
CN code ex 3901 10 10 ex 3826 00 10 ex 3826 00 10 ex 3826 00 10 ex 3901 90 80 ex 3826 00 10 ex 3826 00 10 ex 3826 00 10 ______
M7 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 152
31.12.2018 31.12.2018 31.12.2018 31.12.2020 Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2020
3 3 3 3 Supplementary unit m m — m — m —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
0 % 0
3
)
2
or more, but not more than 0,928 g/cm or more, but than 0,928 not more
3
)
2 D4094), and — % by weight of comonomer, not more than 5 g/10 min and — g/10 min or more, but not than 60 more of 15 flow rate a melt g/cm 0,922 of density — a index of 0,3 g/10 0,05 min (± of blown g/10 of a haze value not min), for the manufacture films ( % and an elongation more than at break 6 (MD/TD) of 210/340 ribbon or typewriter for films of manufacture than 0,985, the 0,945 more but not for or ( similar ribbon % by weight (ASTM but than 49,5 % or more not more — content of 18,5 acid an acrylic — of 14g/10 flow rate min (MFR a melt 125 kg, ASTM D1238) or more °C/2,16 % by weight, and — more but not than 50 % or more D1238) acid content of 6 an acrylic ASTM using (measured kg °C/2,16 190 at more or min 1g/10 of rate flow melt — a Description Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with powder, of form the in 9002-88-4) RN (CAS (LLDPE) polyethylene low-density Linear with 9010-77-9) RN Polyethylene, in gravity of the form of granules, 0,925 of a specific 0,0015), (± a melt flow (CAS acid of copper % than 25 but not more or more % Polyethylene granules, containing by 10 weight acrylic and gravity of Chapter 39, specific to mentioned in note 6 (b) of a the forms Polyethylene, in one of ethylene of % of mica or more but not than 45 % more Polyethylene, containing by weight 35 Copolymer copolymer, acid with: or sodium of an ethylene and acrylic Zinc salt 40 20 30 10 20 53 55 TARIC CN code ex 3901 10 ex 3901 10 90 ex 3901 10 90 ex 3901 20 90 ex 3901 20 90 ex 3901 90 80 ex 3901 90 80
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 153
31.12.2020 31.12.2020 31.12.2018 Date foreseen for mandatory review
31.12.2020
3 3 3 Supplementary unit m m m —
duty 0 % 0 % 0 % 0 % Rate of autonomous
3
)
2 using ASTM D4703,
3
3 ; and
2
or more, but not more than 0,913 g/cm or more, but not more than 0,913
3 or more, but not more than 0,913 g/cm than 0,913 but not more more, or or more, but not more than 0,928 g/cm or more, but than 0,928 not more
of not more than 20 mm of not more than 20
3
3
3 and co-extrusion processing of films for flexible food packaging for flexible co-extrusion processing of films with: % by weight of octene, — more but not than 20 % or more 10 — of 9,0 ratio or more, but not a melt flow than 10,0 more (using ASTM D1238 10.0/2.16), g/10 min, g/10 but not than 0,6 min or more more — kg) of 0,4 index (190 a melt °C/2,16 g/cm 0,909 of density — a with: the form of pellets % by weight of copolymer, — % but not than 20 more more than 10 — (MFR a 190 rate flow melt kg)°C/2,16 of0,7 g/10 min ormore but not than 0,9more g/10 min, g/cm 0,911 of D4703) (ASTM density — a % by of comonomer, weight — %, but not more than 8 more than 5 g/10 min and — g/10 min or more, but not than 60 more of 15 flow rate a melt g/cm 0,922 of density — a % by weight or more acid content is 11 methacrylic — a gel area per 24,6 cm 24,6 per area gel — a ppm 240 than more not of level anti-oxidant — an ( for use in the co-extrusion processing of films for flexible food packaging Description Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in method catalyst Ziegler-Natta a with by powder, produced of a kind of pellets low-density polyethylene in used the form (LLDPE) Octene linear in the of (LLDPE) form polyethylene the low-density in the linear 9002-88-4) which Octene RN in (CAS monomers (LLDPE) acid polyethylene methacrylic low-density and Linear ethylene from exclusively made Copolymer 57 63 65 67 TARIC CN code ex 3901 90 80 ex 3901 90 80 ex 3901 90 80 ex 3901 90 80
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 154
Date foreseen for mandatory review
31.12.2020 31.12.2021 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
4 % 4
)
2
0 % 0
0 % 0
)
2
and with a melt flow rate of 1,3 g/10 min or more at 190 °C/2,16 kg using (measured ASTM g/10 at 190 min or more °C/2,16 of 1,3 rate with a melt flow D1238) polyethylene (CAS RN 64754-90-1) — chlorinated % of but not more than 94 or more, % 80 copolymer (CAS RN 27136-15-8) styrene-acrylic — % of than 20 more, but not more % or 6 — of 0,862 gravity with a specific or more, but not more than 0,865, — length, original % its 200 to at least able to stretch %), — 10 % (± of 50 with a hysteresis %, 20 than more not of deformation permanent — with ( for use in the manufacture of napkin liners for babies ( manufacture of roof sheets block polystyrene, ethylene-butylene copolymer and copolymer of polystyrene, containing by % of styrene weight not than 35 more Description Ethylene maleic anhydride copolymer, whether or not containing another olefin comonomer, olefin another containing not pellets: or of whether form copolymer, the anhydride in weight maleic octene by Ethylene with containing ethylene Mixture of copolymer Block powder polyethylene of acid consisting a copolymer of a salt Ionomer resin of ethylene with methacrylic Chlorosulphonated form the Copolymer and of ethylene, carbon vinyl acetate monoxide, in the for use as a plasticiser in polyethylene, of A-B block Mixtures copolymer of polystyrene and ethylene-butylene copolymer and A-B-A Chlorinated 70 73 80 91 92 93 94 97 TARIC CN code ex 3901 90 80 ex 3901 90 80 ex 3901 90 80 ex 3901 90 80 ex 3901 90 80 ex 3901 90 80 ex 3901 90 80 ex 3901 90 80 ______
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 155
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
) of 700 but than ) or more not more
n
0 % 0
)
2 ASTM D 638 method) ASTM D1238 method);
— of a melting point of more than 150 determined by °C the ASTM (as D 3417 method), — 15 of a heat fusion J/g or more but not than 70 J/g, — 000 by (as determined the ASTM % or more D 638 method), of an elongation at break of 1 — by MPa or more but of a tensile modulus MPa (as determined the not more than 379 of 69 magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable ( contact lenses — by determined the ASTM MPa (as D638 method); of 32-60 strength: of a tensile — by determined the ASTM MPa (as D790 method); of 50-90 strength of a flexural g/10 by min (as determined the kg of 5-15 — 230 of a Melt Flow Rate (MFR) at °C/2,16 % by weight of polypropylene, — or more but not than 80 % more with 40 % by weight of glass fibre, — or more but not than 30 % more with 10 % by weight of mica — or more but not than 30 % more with 10 800 Description Polypropylene, containing no plasticiser, no containing Polypropylene, plasticiser: no mg/kg of 1 iron, 0,05 aluminium, mg/kg of mg/kg of 1 than not more Polypropylene, containing containing Polypropylene, (M weight molecular average number form a liquid of in Polyisobutylene, polyisobutene, Hydrogenated 20 30 40 10 20 TARIC
CN code ex 3902 10 00 ex 3902 10 00 ex 3902 10 00 ex 3902 20 00 ex 3902 20 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 156
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2021 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 Supplementary unit — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
) of 650 or more
n
0 % 0
weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39 mentioned in note 6 (b) in one of the forms of styrene, or less % weight 40 and ethylene and propylene of copolymer — a %) by weight of polystyrene — 3 % (± 21 — a flashpoint of 250 °C or more, — a viscosity index of 150 or more, (M weight molecular average number a — of hydrocarbon resin temperature room at — liquid monomers alkenes C-5 of polymerisation cationic by — obtained 50) (± 370 of (Mn) weight molecular average number a — with — of 500 100) weight (Mw) (± molecular with a weight average butylene and polystyrene containing by weight 10 % or more but not more than 35 % of % or more but not more than 35 butylene and polystyrene containing by weight 10 polystyrene Description A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by containing copolymer, ethylene-propylene an and polystyrene of of: copolymer consisting Block polyiso copolymer, A-B polystyrene, petroleum block of and A-B-A characteristics: with: structure poly(propylene-co-1-butene) following ethylene-propylene-copolymer copolymer of the Liquid block blend with A-B-A copolymer (polymer), an poly-alpha-olefin with resin Amorphous elastomer, aliphatic Thermoplastic % 100 Non-hydrogenated 4-methylpent-1-ene of Polymers Chlorinated polyolefins, whether or not in a solution or dispersion 91 95 97 52 55 60 92 94 TARIC CN code ex 3902 30 00 ex 3902 30 00 ex 3902 30 00 ex 3902 90 ex 3902 90 ex 3902 90 ex 3902 90 ex 3902 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 157
31.12.2018 Date foreseen for mandatory review
31.12.2021 31.12.2021 31.12.2018 31.12.2021
3 Supplementary unit — m — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
Celsius (measured according to method Celsius (measured
o
), containing 50 % recycled material ), containing 50
3 (± 1,5 kg/m (± 1,5
3 at a density of 14,0 kg/m at a density of 14,0 — a melting point of 268 °C or more but not than 272 °C — a setting point of 232 °C or more but not than 247 °C, material filling and additives containing not or — whether styrene, of %) 4 (± — 78 acrylate, n-butyl of %) 2 (± — 9 methacrylate, n-butyl of %) 3 (± — 11 and acid methacrylic of %) 0,7 (± — 1,5 — % of polyolefinic wax % or more but not than 2,5 0,01 styrene, % 3 ± — 83 acrylate, n-butyl % 2 ± — 7 and methacrylate n-butyl % 2 ± — 9 % of polyolefinic wax — % or more but not than 1 0,01 ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of and obtained by polymerization 9 centistokes to 3 centistokes ASTM D 445) ranging from % of tetradecene of dodecene containing a mixture and a maximum 40 tetradecene, of Description White expandable polystyrene beads with a thermal conductivity of not more than 0,034 W/mK 0,034 than more not of 100 conductivity at thermal viscosity a a with with beads poly-alpha-olefin polystyrene Synthetic weight: expandable by with: White containing polystyrene granules Crystalline of form weight: the by in containing Copolymer granules of form the in Copolymer 98 10 40 15 20 TARIC
CN code ex 3902 90 ex 3903 11 00 ex 3903 19 00 ex 3903 90 *ex 3903 90 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 158
31.12.2019 31.12.2020 Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2018 31.12.2019 31.12.2021
3 3 Supplementary unit — — — m m — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
) of not more than 4 500, or powder form in flake than 4 ) of not more
n -methylstyrene and acrylic acid, of a number average molecular α
-methylstyrene and styrene, having a softening point of more than 113 °C α
) of 500 or more but not more than 6 000 of 500 ) or more but not than 6
n — 82 ± 6 % styrene, % 6 ± — 82 acrylate, n-butyl % 3 ± — 13,5 and acid methacrylic % 0,5 ± — 1 — % of polyolefinic wax % or more but not than 8,5 0,01 Copolymer of with styrene Copolymer of weight (M and % of styrene-acrylic-copolymer — more but not than 90 % or more 86 ethoxylate (CAS RN 9004-81-3) acid fatty % of — % or more but not than 11 9 styrene, %) 4 (± % — 74 and n-butylacrylate %) 2 (± % — 24 acid % methacrylic — % or more but not than 2 0,01 and % of styrene-acrylic-copolymer — more but not than 26 % or more 25 % of glycol — % or more but not than 6 5 or completely chemically esterified partially anhydride, Copolymer either with maleic of styrene modified, of an average molecular weight (M Description Copolymer in the form of granules containing by weight: by containing granules of form the in Copolymer weight: by weight: containing by powder, containing weight: of granules by form of containing in form suspension, Preparation, the aqueous in an Copolymer of form in Preparation, 35 40 60 43 50 60 25 45 46 55 TARIC CN code ex 3903 90 90 ex 3903 90 90 ex 3903 90 90 ex 3903 90 ex 3911 90 99 ex 3911 90 99 ex 3903 90 ex 3903 90 ex 3903 90 ex 3911 90 99
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 159
31.12.2020 Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2018
3 Supplementary unit — m — —
duty 0 % 0 % 0 % 0 % Rate of autonomous m and a μ
)
2
m and containing by weight: μ flake-based pigment -5 and 7 on the CIELab colour scale powder (CAS RN 26762-29-8) and styrene %) 7 (± % — 75 methylmethacrylate %) 7 (± % — 25 of 800 maximum diameter styrene, % 65 — minimum divinylbenzene % 25 — maximum ( for use in the manufacture of ion exchange resins % of polymers styrene — more but not than 65 % or more 45 % of poly(phenylene — ether) more but not than 45 % or more 35 — of other additives % not more than 10 colour effects: following special the of more and with one or — metallic or pearlescent with a visual angular metamerism caused by at least % 0,3 — by during radiation emitting light absorption of ultraviolet as characterized fluorescent, — than 92 by L* not and b* less not more than 2 and a* between bright white, as characterized Description Copolymer in the form of granules containing by weight: by containing granules of form the Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or in Copolymer Granules of copolymer of styrene and divinylbenzene of a of 150 minimum diameter weight: by containing Mixture 65 70 80 86 TARIC CN code ex 3903 90 ex 3903 90 ex 3903 90 ex 3903 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 160
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2018 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 )
2
m of not more than 1 % by % weight, m of not more than 1 μ
)
2
)
2
acetate monomers, with: 000 300) (± monomer units, — of polymerisation 1 degree a — of 60 or more, but not more than (K-value) of heat transmission a coefficient 70, — % by weight, content of less than 2,00 material a volatile — a mesh width of 120 at non-passing a sieve fraction ( for use in the manufacture of battery separators and vinyl alcohol, containing by weight: with vinyl acetate Copolymer vinyl chloride of % of vinyl chloride, — more but not than 92 % or more 87 and % of vinyl acetate — % or more but not than 9 2 % of vinyl alcohol, — % or more but not than 8 1 of goods to Chapter 39, the manufacture or (b) for forms mentioned in note 6 (a) one in of the closures and containers for coatings of manufacture the in use for 8523 or headings 3215 or of ( food and drink preserving kind a used for of in the form of a aqueous emulsion %) of methyl acrylate, 1 % (± and chloride 20 more but not more than 4,6 % by and less than weight of trifluoro(heptafluoropropoxy)ethylene ions fluoride 1 mg/kg of extractable Description containing any vinyl or substances any other powder, not mixed with chloride) Poly(vinyl ( monofilaments of manufacture or the % in 3,2 use containing for trifluoro(heptafluoropropoxy)ethylene, co-polymer %) of vinyl 1 % Copolymer (± of vinyl containing and by chloride methyl acrylate, weight 80 and methacrylate tetrafluoroethylene Vinylidene-chloride of Copolymer 30 91 20 93 92 20 TARIC CN code ex 3904 30 00 ex 3904 10 00 ex 3904 40 00 ex 3904 40 00 ex 3904 50 90 ex 3904 61 00
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 161
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2022 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2022 31.12.2022 Supplementary unit — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 /g or more but not more /g or
2 m and 90 than less % of μ 0 % 0
0 % 0 0 % 0
m μ
)
/g, a particle size distribution of 10 distribution than 10 size less % of particle /g, a
2
2
m and an average particle size of 20 m and an particle average μ more than 12 m 35 to Chapter 39 during of the manufacturing coating of wafers for use as protective organic solvent and water semiconductors ( % of the monomer unit ethylene weight not than 38 more sobutylene, in powder, whether or not with fillers not with or powder, whether sobutylene, in Description Poly(vinylidene fluoride) (CAS RN 24937-79-9) RN (CAS fluoride) m of 8 surface specific powder, of a of in the form Polytetrafluoroethylene, Poly(vinylidene by an tetrafluoroethylene containing 9002-89-5), whether or not modified with hexafluoroi with chlorotrifluoroethylene, Copolymer of ethylene and 26221-27-2), difluoride RN ethylene RN vinylidene (CAS of (CAS and alcohol) mentioned note 6 (b) in forms in one of the Copolymer of ethylene with chlorotrifluoroethylene, Copolymer alcohol chlorotrifluoroethylene poly(vinyl vinyl of of and and to Chapter 39 (b) forms mentioned in note 6 (a) in one of the Polychlorotrifluoroethylene, Copolymer consisting ethylene essentially of preparation, copolymer Viscous soluble Water 30 81 85 93 94 96 97 10 40 TARIC
CN code ex 3904 61 00 ex 3904 69 80 ex 3904 69 80 ex 3904 69 80 ex 3904 69 80 ex 3904 69 80 *ex 3905 91 00 *ex 3904 69 80 *ex 3905 30 00 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 162
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2022 Supplementary unit — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
0 % 0 0 % 0 ) of 25 000 or more but not more than 150 000 000 and or containing more but not by more than 150 ) of 25
w
or more but not more than 99 % of vinylpyrrolidone, in the form of a solution % of vinylpyrrolidone, in water in the form more but not than 99 or more average molecular weight (M % groups more but of triacontyl not more than 82 ( of heading of medicaments 3003 manufacture the or 3004 and stabilizer palmitate weight: and groups % of evaluated as vinyl acetyl acetate % or more but not more than 13 — 9,5 % of hydroxy — groups evaluated as vinyl alcohol % or more but not than 6,5 5 whether or not of methyl acrylate, % or more group substituent, containing as a by weight 50 dioxide silicon mixed with Description Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % 97 weight by containing methacrylate, dimethylaminoethyl and vinylpyrrolidone polyvinylpyrrolidone for of eicosylated monomer, Polymer or polyunsaturated Hexadecylated a 25655-41-8) of RN quantities Polymer of vinyl in formal, one of the forms mentioned in note 6 (b) to Chapter 39, of a weight (CAS small (INN)-iodine isopropyl with Povidone in acid dissolved acrylic acid, or % 78 by weight groups, containing by triacontyl substituted partially pyrrolidone) Poly(vinyl of acrylic product and Polymerization acrylate isooctyl methacrylate, (photoinitiator) monomer, catalyst acrylic acrylate, modified consisting of resin Photosensitive stearyl of Copolymer 92 95 96 97 98 10 with ethylene and Copolymer a monomer of methyl acrylate carboxy containing a non-terminal 15 27 TARIC
3906 90 60 3906 90 CN code ex 3905 99 90 ex 3905 99 90 ex 3905 99 90 ex 3905 99 90 ex 3905 99 90 ex 3906 90 ex 3906 90 *ex 3906 90 ______
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 163
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2018 31.12.2020 31.12.2020 31.12.2019 31.12.2018 Supplementary unit — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous m or μ
0 % 0
m μ
) of more than 500 000 but not more than 1 200 000 200 000 but not more than 1 ) of more than 500
s at 120 s at method by ASTM °C test as determined the
w ·
) of 500 or more but not more than 6 000 of 500 ) or more but not than 6
m
n μ m, insoluble in water μ D 3835 Chromatography Permeation (GPC) test, according to the Gel average molecular weight (M more but not more than 10 of not more than 18 of 3 with an average diameter form 1), in microsphere Pa 50000 than more not of viscosity — a ether, vinyl — chloromethyl ether, vinyl — chloroethyl — chloromethylstyrene, chloroacetate, — vinyl acid, — methacrylic ester, monobutyl acid — butenedioic the forms % of each the monomeric units, in one of than 5 containing by weight not more to Chapter in note 6 (b) mentioned 39 — a weight average molecular weight (M weight molecular average weight — a % 1 than less of content monomer residual — a Description Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67- RN (CAS methacrylate methyl C30 and number of a and Copolymer with hydroxyethyl of styrene 2-ethylhexyl acrylate, methacrylate to trimethacrylate C10 of 5 size with a particle and alkyl methacrylate, Core shell copolymer of butyl acrylate trimethylolpropane of of size copolymer of a particle methacrylate White powder of 1,2-ethanediol dimethacrylate-methyl chain Copolymer alkyl ester an with: sale retail kg, and not for than 1 polymer in packages of not more acrylic Transparent with acrylate) Poly(alkyl acid with one or more of the following of acrylic monomers Polymers of in esters the chain: 30 33 35 37 40 41 50 TARIC CN code ex 3906 90 ex 3906 90 ex 3906 90 ex 3906 90 ex 3906 90 ex 3906 90 ex 3906 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 164
Date foreseen for mandatory review
31.12.2021 31.12.2021 31.12.2018 31.12.2019 31.12.2018 31.12.2020 31.12.2020 31.12.2018 31.12.2018 Supplementary unit — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0
) of 100 000 or more of 100 )
n 0 % 0
) of 40 000 ) of 40
n point of more than 260 more point of °C, containing by weight: and % of polyacrylamide — more but not than 85 % or more 75 % of polyethylene glycol — more but not than 25 % or more 15 and methyl methacrylate cyclosiloxanes (CAS RN 143106-82-5) (± 5 Scanning (DSC) °C), measured with Calorimetry Differential — 33 % or more but not more than 37 — acid copolymer, % of butyl methacrylic methacrylate % of propylene glycol, and — more but not than 28 % or more 24 % of water — more but not than 41 % or more 37 and 1,4-phenyldiamine acid copolymer of terephthalic weight (M a number molecular average Description Polyacrylamide powder having an average particle size of less than 2 microns and a melting a and microns 2 than less of °C size 65 particle of average (Tm) an methacrylate, temperature having allyl melting powder butylacrylate, a Polyacrylamide methacrylate, with (Dimethoxymethylsilyl)propyl cobalt, of with Copolymer modified weight: a chemically by of Polyalkylacrylate, (M containing fibers polytetrafluoroethylene weight and Preparation and molecular polydimethylsiloxane trioxan-oxirane-copolymer containing average polymethacrylates) a endcaps, number of Polydimethylsiloxane-graft-(polyacrylates; of acetyl a lysine, Mixture with of with Polyoxymethylene oxide) modified Poly(ethylene chemically Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, 53 63 65 73 80 10 20 10 20 TARIC CN code ex 3906 90 ex 3906 90 ex 3906 90 ex 3906 90 ex 3906 90 ex 3907 10 00 ex 3907 10 00 ex 3907 20 11 ex 3907 20 11
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 165
Date foreseen for mandatory review
31.12.2021 31.12.2022 31.12.2021 31.12.2018 31.12.2018 31.12.2019 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous - -[3- ω ω
-vinyl-2-pyrrolidone N ) of 3 500 (± 100) ) of 3
n -phenylene oxide) in the form of powder of form the in -phenylene oxide) p -[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- -[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- α and 104810-48-2) RN hydroxypoly(oxy-1,2-ethanediyl) (CAS α [3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy- 1,2-ethanediyl) (CAS RN 104810-47-1) — — 100 (CAS RN 25190-06-1) but not more than 3 % of propylene — oxide and more but not than 52 % or more 48 % of butylene oxide — more but not than 52 % or more 48 % of a copolymer of dibutyl % or more but not more than and 30 1,2-epoxypropane and 20 maleate and weight (M Poly( °C, 210 of glasstransitiontemperature a — with — 000, 000 or more but not more than 80 of 35 weight (Mw) with a weight average molecular — viscosity of 0,2 with an inherent or more but not than 0,6 dl/gram Description Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2 700 or more or 700 2 of (Mw) weight molecular weight: containing: average by Preparation weight containing a monododecylether, with oxide, butylene glycol molecular and ether average oxide Polytetramethylene number propylene a of with Copolymer tetrahydro-3-methylfuran and tetrahydrofuran glycerol polymer of of a % 80 than but not more or more % 70 containing by weight Mixture, of Copolymer 50 75 60 20 25 30 40 TARIC
CN code ex 3907 20 20 ex 3907 20 11 ex 3907 20 ex 3907 20 ex 3907 20 ex 3907 20 99 *ex 3907 20 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 166
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2021 31.12.2018 31.12.2019 Supplementary unit — — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
0 % 0
0 % 0 -methoxy, polyoxyethylene (CAS RN 883993- -methoxy, polyoxyethylene RN (CAS ω 0 % 0
-[3-(3-Maleimido-1-oxopropyl)amino]propyl- 1 ppm of sodium group, of a solution acetate in 2-methoxy-1-methylethyl in the form polymer as the main perfluoropolyether terminated vinyl-silyl consisting of the same type ingredient 000 molecular weight (Mn) of 5 carbamate) (CAS RN 266318-38-1) of a number 000 average or molecular weight (Mn) of 38 000 more but not more than 40 α 35-9) Description Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide a containing group isocyanate end-groups an alkoxysilyl (epichlorohydrin) Polypropylene glycol monobutyl than (CAS RN of not more ether 9003-13-8) of an alkalinity with having 1-chloro-2,3-epoxypropane modified Poly(oxypropylene) of chemically Homopolymer glycol Polyethylene propylene oxide, having aminopropyl and methoxy oxide and end-groups ethylene Copolymer of monomethylether perfluoropolyether polymer or an assortment of two components terminated Vinyl-silyl di-p-aminobenzoate glycol oxide ester.alpha.,.epsilon.-bis(polyethylene of methoxy Succinimidyl ester poly(ethylene glycol)propionic acid, of a number average Polytetramethylene N-hydroxysuccinimidyl L-Lysine 60 15 30 35 45 50 55 60 65 70 TARIC CN code ex 3907 20 99 ex 3907 20 99 ex 3907 20 99 ex 3907 20 99 ex 3907 20 99 ex 3907 20 99 ex 3907 20 99 ex 3907 20 99 ex 3907 20 99 *ex 3907 20
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 167
Date foreseen for mandatory review
31.12.2022 31.12.2020 31.12.2020 31.12.2018 31.12.2018 Supplementary unit — — — — kg
duty 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
)
2
)
2 bound in the epoxide resin, epoxide the bound in chloride, and chloride, and — solid content, chemically on the phosphoros % calculated than 2 more containing by weight than 300 ppm hydrolysable containing less or not containing any hydrolysable chloride — solvents — containing of a kind used production or rolls for the sheets of printed of prepreg manufacture use in the for circuits ( — of brome, % or more containing by weight 21 than 500 ppm hydrolysable containing less or not containing any hydrolysable chloride — solvents — containing % or more of silicon dioxide, Epoxide for the encapsulation resin, containing of by weight 70 ( 8548 or 8541, 8542 8535, 8536, 8533, headings of goods solvent, with: — % by weight, hydrate content of not than 40 a zinc borate more — % by weight content of not more than 5 a diantimony trioxide Description Isoamyl alcohol polyoxyethylene ether (CAS RN 62601-60-9) RN (CAS ether polyoxyethylene alcohol Isoamyl halogen-free, resin, Epoxide any containing resin not Epoxide copolymer, 2-propenenitrile/1,3-butadiene-epoxide of resin epoxide Liquid 40 70 80 15 25 50 TARIC CN code ex 3907 30 00 ex 3907 30 00 ex 3907 30 00 ex 3926 90 97 ex 3907 30 00 *ex 3907 20 99 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 168
31.12.2021 Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2019 31.12.2019 31.12.2018 31.12.2018
3 Supplementary unit — — — — m — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo- isopropylidene(3,5-dibromo- -phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) ω
chloride, terephthaloyl chloride and chloride, terephthaloyl chloride resorcinol, -Phenoxycarbonyl- α RN 94334-64-2) (CAS 1,4-phenylene)oxycarbonyl] — containing by weight 12 % or more but not more than 26 % of a copolymer of isophthaloyl and endcaps, p-cumylphenol — with 900 — 900 than 31 or more but not of 29 weight (Mw) molecular with a weight average (1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps hexane-1,6-diol — of 1,23 gravity or more but not than 1,27 with a specific more 23 at °C, and — or additives % by modifiers weight of other containing not more than 10 from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups Description Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5) RN (CAS resin ether polyglycidyl Polyglycerol Polycarbonate of phosgene and bisphenol A: granules: or pellets Polycarbonate of carbonic dichloride, 4,4'-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4'- terephthalate) Copolymer acid and of terephthalic isophthalic acid with ethylene glycol, butane-1,4-diol and Poly(ethylene obtained 3985 methods), 1434 and D ASTM the by determined (as Oxygen binding copolymer 60 35 70 80 10 40 60 TARIC
CN code ex 3907 40 00 ex 3907 40 00 ex 3907 40 00 ex 3907 69 00 ex 3907 69 00 ex 3907 69 00 *ex 3907 30 00 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 169
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2022 31.12.2020 31.12.2019 31.12.2019 31.12.2020 Supplementary unit — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 3.5 % Rate of autonomous 0 % 0 0 % 0
0 % 0
-cumylphenolendcaps, and a weight average molecular weight (Mw) of weight (Mw) -cumylphenolendcaps, molecular and a weight average
p
containing fillers cyclohexanedimethanol poly(3-hydroxybutyrate) Poly(hydroxyalkanoate), predominantly consisting of andpolysiloxane, with 900 100 or more but not than 25 24 % by weight of cyclohexane dimethanol 10 dioles and/or cyclic and cyclohexanedimethanol, with linear completed Description Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder form of powder form in the prepolymer, in phthalate 26099-71-8), chloride Diallyl RN terephthaloyl (CAS point of not less than 270 copolyester with a melting Liquid crystal chloride, °C, whether or not Poly(oxy-1,4-phenylenecarbonyl) isophthaloyl than resorcinol, more A, containing bisphenol Copolymer, containing % by 72 weight acid and/or and or more isomers thereof of terephthalic dimethanol, phosgene, cyclohexane of and Polycarbonate terephthalate) poly(ethylene of Copolymer Copolymer, consisting thereof of 72 acid and/or derivatives % by weight or more of terephthalic 30 20 Poly(lactic acid) Poly(lactic 10 20 10 25 40 70 80 TARIC
3907 70 00 3907 70 CN code ex 3907 99 80 ex 3907 91 90 ex 3907 99 05 ex 3907 99 80 ex 3913 90 00 ex 3907 99 80 ex 3907 99 80 *ex 3907 99 80 *ex 3907 99 80 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 170
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2020 31.12.2019 31.12.2018 31.12.2020 31.12.2018 Supplementary unit — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
m μ
than 90 % than 90 note 6 (b) to Chapter 39 to Chapter note 6 (b) (CAS RN 169284-22-4) and 1477-55-0) RN (CAS — 1,3-benzenedimethanamine 124-04-9) RN (CAS acid — adipic whether or not containing isophthalic acid (CAS RN 121-91-5) diameter of less than 150 ( and devices photocopiers, of ink multifunction machines, printers for fax in the manufacture — % by weight or more but phenolic not polymer (CAS RN more resin 9003-35-4) with 80 etherdiamine Description Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic poly aliphatic an in with mentioned polymerised forms acids the octadecanecarboxylic 1,9-nonanediamine of of and one mixtures 2-methyl-1,8-octanediamine in of with Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), product polymer Reaction acid 1,4-Benzenedicarboxylic containing: Copolymer of: content a Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a with use for have been evenly distributed, particles in which magnetic resin thermosetting Powder of form powder in Polymer 10 30 55 70 10 20 40 TARIC
CN code ex 3908 90 00 ex 3908 90 00 ex 3908 90 00 ex 3908 90 00 ex 3909 40 00 ex 3909 40 00 ex 3909 40 00 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 171
Date foreseen for mandatory review
31.12.2019 31.12.2019 31.12.2019 31.12.2019 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
15 % phobic groups, phobic groups, phobic groups, — polyurethane oligomers and acrylated more of two-functional % or 60 and acrylates, (metha) tri-functional and mono-functional of %) 8 (± % — 30 acrylates (metha) mono-functional functionalized hydroxyl of %) 3 (± % — 10 % of ethoxylated polyurethane modified with hydro % or more but not — more than 18 14 and modified starch, % of enzymatically — % or more but not than 5 3 % of water — more but not than 83 % or more 77 % of ethoxylated polyurethane modified with hydro % or more but not — more than 20 16 % of diethylene glycol and butyl — ether, more but not than 23 % or more 19 % of water — more but not than 64 % or more 60 % of ethoxylated polyurethane modified with hydro % or more but not — more than 36 34 % of propylene glycol, and — more but not than 39 % or more 37 % of water — more but not than 28 % or more 26 — phenol (CAS RN 108-95-2) with not more than 5 % and % 5 than more not with 108-95-2) RN (CAS — phenol — than but not more (CAS RN 100-97-0) with 5 by or more weight % hexamethylenetetramine Description UV curable water soluble liquid photopolymer consisting of a mixture by weight of weight by mixture a of consisting photopolymer liquid soluble water curable UV weight: by containing Preparation weight: by containing Preparation weight: by containing Preparation 10 20 30 40 TARIC CN code ex 3909 50 90 ex 3909 50 90 ex 3909 50 90 ex 3909 50 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 172
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2021 31.12.2021 31.12.2021 31.12.2021 31.12.2022 Supplementary unit — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 s (CAS RN · 0 % 0
-3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl- -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl- -(3-methacryloxy-2-hydroxypropyloxy)propyldi ω ω
-Butyldimethylsilyl- – Dimethylacrylamide (CAS RN 2680-03-7) (CAS Dimethylacrylamide – α -Butyldimethylsilyl- N , α N
propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5)and RN (CAS propoxy] propyl-2-methyl-2-propenoate terminated silicone polymer (CAS RN 146632-07-7) methylsilyl-polydimethylsiloxane (CAS RN 662148-59-6) and trimethylsiloxy-terminated disiloxanyl] % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] 10 — % — 10 or more, % or — 30 more, — 10 % or more, or % — 10 70131-67-8) nylsiloxane) gum Description Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), poly[methyl(vinyl)siloxane] RN (CAS and siloxane oxide)) poly(methyl-3,3,3-trifluoropropylsiloxane) methyl(propyl(polypropylene of Dimethyl, weight: copolymer by Block containing Preparations mPa weight: 38-45 by of containing viscosity Preparations (dimethylsiloxane/diphe a copoly with containing polymer solvent hydroxy-terminated of a kind implants Silicones used of long surgical in manufacture term the in Siloxane, adhesive Dimethyl sensitive pressure based Silicone 15 20 25 35 40 45 50 TARIC
CN code ex 3910 00 ex 3910 00 ex 3910 00 ex 3910 00 ex 3910 00 ex 3910 00 *ex 3910 00 ______
M7 M8 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 173
Date foreseen for mandatory review
31.12.2021 31.12.2019 31.12.2018 31.12.2019 31.12.2018 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
68083-19-2), RN 68988-89-6), and chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7) the ASTM method D6166) — polydimethylsiloxane % of vinyl (CAS RN terminated but % or more not more than 65 55 (CAS silica % of dimethylvinylated — and trimethylated but % or more not more than 40 30 products with reaction acid, sodium salt, silicic % of than 5 but not more more % or — 1 methacrylate end groups semiconductor devices % by weight % but not more than 25 alkenes and more than 10 C-5 to C-12 cycloaliphatic aromatic alkenes yielding a hydrocarbon resin with: and 120 than more of value iodine — an or product pure the for 10 than more of Colour Gardner — a — a 50 by than 8 for Colour determined of more a Gardner % solution toluene (as by weight in cyclopentadiene after mixing, both components cyclopentadiene after containing: — more by % or weight of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), 83 Description Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with weight: substituted, by trifluoropropyl containing and Preparation glycol polyethylene not or whether Polydimethylsiloxane, poly(dimethylsiloxane) in edges and prevent short circuits to protect form, coating in primary Passivating silicon Monomethacryloxypropylterminated Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight Set of two components, in a volume of 1:1, ratio intended to produce polydi a thermosetting 55 60 70 80 81 20 TARIC CN code ex 3910 00 ex 3910 00 ex 3910 00 ex 3910 00 ex 3911 10 00 ex 3911 90 19
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 174
Date foreseen for mandatory review
31.12.2022 31.12.2021 31.12.2019 31.12.2019 31.12.2019 Supplementary unit — — — — —
duty 0 % 0 % Rate of autonomous
0 % 0 0 % 0
0 % 0
25722-66-1), sodium hydroxide — Cyanic acid, C,C’-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 1156-51-0), RN (CAS — 1,3-Bis(4-cyanophenyl)propane — % by weight in a solution of butanone (CAS RN than 78-93-3) with a content of 50 less — a synthetic rubber, synthetic — a — % or more of tricyclopentadiene. whether or not containing by weight 7 component containing: and each separate compound, aluminium-alkyl an — either — or an organic complex of tungsten — or an organic complex of molybdenum Description Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form powder in 60806-48-6) 2,4,4-trimethylpentene RN and (CAS resin 2,5-furandione Copolymer of ethyleneimine and in an ethyleneimine dithiocarbamate, aqueous solution of tert-butyl-phenol formaldehyde of and Xylene salt 1,3-dimethylbenzene m- sodium with Polycarboxylate polymer Formaldehyde, containing: Preparation, 30 40 50 60 70 TARIC
CN code ex 3911 90 19 ex 3911 90 19 ex 3911 90 19 ex 3911 90 19 *ex 3911 90 19 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 175
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2020 31.12.2018 31.12.2018 31.12.2022 31.12.2022 31.12.2018 31.12.2021 31.12.2021 31.12.2020 31.12.2018 31.12.2018 Supplementary unit — — — — — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0
0 % 0
0 % 0 0 % 0 0 % 0 -methylstyrene α
0 % 0 0 % 0
3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated 3a,4,7,7a- tetrahydro- % by weight more but not than 16 % or more content of 9 calcium 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and (CAS RN 503442-46-4) 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0) dodecyl sulphate, containing by weight 27 3) % of ethylcellulose (± Description Alternated copolymer of ethylene and maleic anhydride (EMA) anhydride and maleic ether vinyltoluene with and vinyl polymer of ethylene 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, methyl Copolymer Dimethanonaphthalene, of and 1,4:5,8- 9011-16-9) copolymer acid RN Alternated maleic (CAS of having a with vinyl ether, and methyl acid maleic of copolymer anhydride a of and sodium salt calcium Mixed Copolymer 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene acid sodium of with maleic polymer and 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene Hydrogenated and of hexadecan-1-ol polymer ether containing Hydrogenated 9012-09-3) vinyl dispersion RN methyl aqueous (CAS of an powder triacetate Copolymer of and acid of a copolymer methyl vinyl of maleic Calcium zinc salt ether plasticized diacetate Cellulose form not Cellulose the in Ethylcellulose, Ethylcellulose, 25 30 35 40 45 53 57 65 86 30 40 10 20 TARIC
CN code ex 3911 90 99 ex 3911 90 99 ex 3911 90 99 ex 3911 90 99 ex 3911 90 99 ex 3911 90 99 ex 3911 90 99 ex 3912 11 00 ex 3912 11 00 ex 3912 39 85 ex 3912 39 85 *ex 3911 90 99 *ex 3911 90 99 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 176
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — — — —
duty 0 % 0 % 0 % Rate of autonomous 0 % 0
0 % 0 0 % 0 0 % 0 0 % 0
)
2
method) and atoms by the ASTM of propionyl determined D 817-72 or more — (as % containing by weight 25 — by ASTM determined of a viscosity not more than 120 D the poise (as 817-72 method), for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings ( whether or not hydrolysed, than having weight (Mw) of less a weight average molecular 350 000 Description Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon more or 3 of chain-lengths alkyl with powder: alkylated of and 9004-65-3) form hydroxyethylated RN 68610-92-4) the both (CAS RN in addition, Cellulose, (INN) (CAS non-plasticised, acid Hypromellose 10 propionate, phthalic Polyquaternium acetate and/or Cellulose carboxylation by phthalate modified methylcellulose enzymatically Hydroxypropyl 9067-32-7) or RN chemically (CAS Protein, 9082-07-9) hyaluronate RN sodium (CAS Sterile salt sodium acid, Chondroitinsulphuric 30 40 50 10 20 30 85 95 TARIC
CN code ex 3912 39 85 ex 3912 39 85 ex 3912 39 85 ex 3912 90 10 ex 3912 90 10 ex 3913 90 00 ex 3913 90 00 ex 3913 90 00 ______
M7 M6 M7 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 177
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m μ
m or more but not than 110 more μ
containing the following additives: dioxide — titanium methacrylate) — poly(methyl carbonate — calcium agents — binding anhydride) poly(epoxy or — polyamide-6 present if % of polytetrafluorethylene — % or more but not than 9 7 % of inorganic fillers — more but not than 25 % or more 10 mm and of not more than 85 mm, a diameter oroethylene, of a length of not more than 600 of 30 a wall-thickness fuel hoses of polyurethane, consisting of a layer with, on film, against Reflecting one imprints side, security mark for an or substitution of data or duplication, or an official alteration counterfeiting, covered intended use, and side, an adhesive beads embedded layer, and, on other glass the film release a on with both sides or on one side rubber synthetic or natural non-vulcanised with — coated mm — mm or more but not than 40 more with a width of 20 urethane and acryl hydroxide, aluminium silicone, — containing Description Rods with cellular structure, containing by weight: by containing pilings and facings, of sheet a kind of used in the manufacture of poly(vinyl chloride) Profiles structure, cellular with Rods and polyperfluoroalkoxytriflu block Pipe consisting of a copolymer of polytetrafluoroethylene tape: into car system for insertion clip and connectors a release containing O-rings, a retainer Plastic adhesive two-sided of Rolls 10 25 31 91 10 91 91 20 TARIC CN code ex 3919 10 19 ex 3919 10 80 ex 3916 20 00 ex 3916 90 10 ex 3917 32 00 ex 3917 40 00 ex 3919 90 80 ex 3919 10 19
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 178
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2020 31.12.2022 31.12.2020 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m or more, μ m or more, μ
90 °C or more but not than 200 and °C, and polyester liner, a of 90 debonds temperatures that at but not more adhesive more °C or release thermal acrylic than 200 °C, and liner a polyester liner sensitive adhesive with channels and a release with a pressure the other side polyester or polypropylene liner — coated on one side with an acrylic thermal release adhesive that debonds at temperatures of temperatures Polyester film: at debonds that adhesive release thermal acrylic an with side one on — coated — on the other side not coated pressure sensitive adhesive or with an or coated with an acrylic or duplication, or substitution of data alteration against counterfeiting, imprints one side, security mark for an intended or an use, official only lighting, visible by and means of a retroreflecting on both or covered on one side layer, an adhesive side, other and, on the beads embedded glass sides with film a release 100 of thickness a — with %, 100 than more not of break at elongation — an adhesive silicon sensitive pressure a with side one on — coated Black poly(vinyl film: chloride) D2457, ASTM to according degrees 30 than more of gloss a — with — and on film, poly(ethyleneterephthalate) protective a with on one side not covered or whether film: Ethylene vinyl acetate — of a thickness 100 and a adhesive UV-sensitive or sensitive pressure acrylic an with on one side coated — Description of alkyd polyester, with, on a layer of poly(vinyl chloride), layer consisting of a film, Reflecting film: Polytetrafluoroethylene 27 40 43 20 43 26 35 37 TARIC
CN code ex 3919 10 80 ex 3919 10 80 ex 3919 90 80 ex 3919 10 80 ex 3919 10 80 ex 3919 90 80 *ex 3919 10 80 *ex 3919 90 80 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 179
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2022 31.12.2018 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
m or more, μ
)
2
m or more and an adhesive part of acrylic type of a thickness of 5 a thickness of type of of acrylic and an adhesive m or more part
μ Reinforced polyethylene foam tape, coated on both micro channelled sides with an acrylic pressure sensitive adhesive and on one side mm a liner, with an application thickness of 0,38 or more but mm not more than 1,53 consisting of a Adhesive of a base of a copolymer film of ethylene and (EVA) vinyl acetate thickness of 70 ( for use in the grinding and/or dicing process of silicon discs Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an pressure sensitive adhesive acrylic and a release by ASTM the determined than 25 an angle of 90° adhesion N/cm (as more of a peel of at sheet, D 3330 method) Reflecting sheet: — shaped pattern embossed on a regular one side in polymer film polycarbonate or acrylic of a — and covered on one or metallisation, or both of plastic sides with one or more layers — sheet release and a layer on self-adhesive with a not covered one side whether or Description
45 50 41 55 57 30 45 25 53 30
TARIC
CN code ex 3919 10 80 ex 3919 90 80 ex 3919 10 80 ex 3919 90 80 ex 3920 10 89 ex 3920 61 00 *ex 3919 10 80 *ex 3919 10 80 *ex 3919 90 80 *ex 3919 90 80 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 180
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2021 31.12.2018 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
data or duplication, or an official mark for an intended use, mark for data or duplication, an official crylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methyl methacrylate), an adhesive layer and a release sheet — or substitution of alteration resin with imprints against counterfeiting, of an a layer acrylic beads, glass embedded having resin acrylic an of layer — a — hardened by resin cross-linking agent, of an acrylic a melamine a layer layer, metal — a and adhesive, acrylic — an film release — a Rolls of polyethylene foil: side, one on — self-adhesive — mm, mm or more, but not more than 0,09 thickness of 0,025 of a total mm, 110 — mm or more, but not more than 1 width of 60 of a total of products a kind of headings used 8521 of the surface for the protection or 8528 sheet Self-adhesive reflecting whether or not in segmented pieces, watermark, a containing not or — whether — tape coated on one side with an adhesive; with or without an application sheet consists of: the reflective — or vinyl polymer, of acrylic a layer — or polycarbonate containing microprisms, of poly(methyl methacrylate) a layer metallisation, of layer — a and layer, adhesive — an Description Reflecting film consisting of consisting sheet showing laminated pattern, consisting of poly(methylmetha Reflecting of a film a regular film Reflecting 70 73 75 50 60 63 TARIC CN code ex 3919 10 80 ex 3919 10 80 ex 3919 10 80 ex 3919 10 80 ex 3919 90 80 ex 3919 90 80
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 181
Date foreseen for mandatory review
31.12.2021 31.12.2019 31.12.2018 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous m, and μ
m or more but not more than 64 more but not m or μ m or more without release liner m or more without release μ substitution of data or duplications, or an official mark for an intended use, mark or duplications, an official substitution of data of ionic organic choline compound, layer with an antistatic the other side compound, Self-adhesive reflecting film, Self-adhesive reflecting consisting of several layers including: resin, acrylic of copolymer — a — polyurethane, — a metallised layer with, on one side, laser imprints against counterfeiting, alteration or and microspheres, — glass sides both or one on liner release a with layer, adhesive — an polyethylene or any other polyolefin film: poly(ethyleneterephthalate), Poly(vinyl chloride), liner a and adhesive UV-sensitive acrylic an with side one on — coated — thickness of 65 of a total faults, or impurities from — free — and on liner, protective adhesive and a sensitive pressure with an acrylic coated on one side of modified long organic dust-proof layer chain alkyl whether or not with a printable — 54 of liner the without thickness total a — with mm 305 than 1 mm but not more 295 — a width of more than 1 — a release sheet release — a — of polyester whether or not containing an additional layer Description film: self-adhesive terephthalate) poly(ethylene Transparent 75 85 80 28 19 TARIC CN code ex 3919 10 80 ex 3919 10 80 ex 3919 90 80 ex 3919 90 80 ex 3919 90 80
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 182
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2018 31.12.2019 31.12.2018 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m or more, but not more more, m or μ
m, and with a width of more than 1 245 mm but not more than 1 255 mm 255 mm but not more than 245 1 m, and with a width of more than 1 μ
terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water liner protective poly(ethylene terephthalate) coating and a soluble methylcellulose pattern, shaped regular a in side one on embossed layer acrylate epoxy an of — consisting — and covered on material both of plastic sides with one layers or more sheet release a and layer adhesive an with side one on — covered than 500 V not more discharge of and an electrostatic put up in rolls of a width of 45,7 cm or more but not more than 132 cm (supplied with a release liner) adhesive, with pressure sensitive a thickness of 60 with an acrylic than 70 Description Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147 N/25 mm N/25 0,147 than sheet: of copolymer and a terephthalate) poly(ethylene of layers 3 laminated 1 to consisting of Film more laminated not side Reflecting of one strength on adhesive coated an faults, with or film, impurities terephthalate) from Poly(ethylene free film, self-adhesive adhesive sensitive) (pressure and/or rubber acrylic on with an coated both sides film Polyester poly(ethylene) Transparent 23 24 27 29 33 TARIC
CN code ex 3919 90 80 ex 3919 90 80 ex 3919 90 80 ex 3919 90 80 ex 3919 90 80 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 183
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m, and μ m or more but not m or more μ
m or more but m or more not more m μ μ
m μ
m or more but m or more not more than 40 μ
m, covered on one side with an adhesive layer and a release sheet release and a covered on m, with an adhesive layer one side μ m, μ than 17 regular pattern, consisting of poly(vinyl chloride) film coated on one side with: beads, micro glass containing polyurethane of layer — a acetate), vinyl poly(ethylene of layer — a and layer, adhesive — an sheet release — a than 100 not more of diameter a of embedded balls glass which are an adhesive microspheres, a polymer containing glass of film a shaped pattern, in a regular side layer and a release sheet 8 of thickness a with rubber synthetic on based layer adhesive — an — with a thickness of 28 a polyolefin layer — with a thickness below 1 layer a non-silicone release exceeding 90 Description cm, showing an embossed sheet on with layered rolls, a width Reflecting of more than 20 mm, coated with an adhesive in sheeting, of a thickness less than 1 Poly(vinyl chloride) of: consisting embossed on of poly(methyl sheet consisting methacrylate) one of a film laminated Reflecting tape polyolefin a thickness of 50 of of poly(methyl methacrylate), film Biaxially-oriented White 35 39 49 51 52 TARIC
CN code ex 3919 90 80 ex 3919 90 80 ex 3919 90 80 ex 3919 90 80 ex 3919 90 80 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 184
31.12.2018 Date foreseen for mandatory review
31.12.2019 31.12.2020 31.12.2020
2 Supplementary unit — — — m
duty 0 % 0 % 0 % 0 % Rate of autonomous
m, consisting of μ
m μ m or more, but not more than 400 but not more or more, m μ
more than 40 microns — a polymer layer polymer — a layer adhesive — an spheres; oblate containing embossed, side one on liner, release — a whether or not on polymer the other side covered with and layer an adhesive layer a metallised polyethylene, and polypropylene of mixture a containing layer — each — % by other polymers, weight of containing not more than 3 layer, core the in dioxide titanium containing not or — whether and adhesive sensitive pressure acrylic an with — coated liner release a — with — thickness of not more than 110 of an overall covered on or dyed poly(ethylene metallised terephthalate), of transparent, one or more layers adhesive sensitive pressure a with side other and on the coating resistant scratch a with one side liner release and a — more than 95 with a thickness of but not more than 110 layer a poly(olefin) microns — than 5 but not more than 15 thickness of more with a microns an adhesive layer — based on a layer epoxy than 4 resin, with a thickness of more but not more than 100 microns — than 35 with a thickness of more but not consisting of poly(ethylene terephthalate) a liner Description Poly(vinyl chloride) film, on one side covered with covered side one on film, chloride) Poly(vinyl film, 40 trilayer of Co-extruded thickness a with of: film consisting Self-adhesive film plastic Self-adhesive 54 63 65 67 TARIC
CN code ex 3919 90 80 ex 3919 90 80 ex 3919 90 80 ex 3919 90 80 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 185
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2020 31.12.2022 31.12.2018 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
2 substitution of data or duplication, or an official mark for an intended mark use or duplication, an substitution of data official — an embossed polyester layer, polyester embossed — an layer, copolymer isocyanate caprolactone-cyclohexylene — a adhesive sensitive pressure — a liner release with a and covered on one side layer, polyurethane — a layer, microspheres glass — a and layer, aluminium metallised — a liner, release a with sides both or one on covered adhesive, — an layer, chloride) poly(vinyl a not or — whether or alteration counterfeiting, against imprints security incorporating not or whether layer — a Reflector or diffuser sheets, in rolls, or windows to affixed be to radiation, heat infra-red or ultraviolet against protection — for — for equal transmission and distribution of light, intended for LCD modules mm, of a blend of polyethylene of a thickness not than 0,20 and Film more a copolymer of coating both rhomboidal ethylene with oct-1-ene, embossed pattern, for sides of a in a regular ( layer of unvulcanized rubber Description pad polishing or not coated with a of microporous polyurethane, discs whether Self-adhesive mm, consisting of the following: of a minimum thickness of 0,36 Film of: consisting film Reflecting 83 10 33 20 70 81 82 TARIC CN code ex 3920 10 25 ex 3919 90 80 ex 3919 90 80 ex 3920 10 89 *ex 3919 90 80 *ex 3919 90 80 *ex 9001 90 00
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 186
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2018 31.12.2020 31.12.2021 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
m or more, or more
μ
3
side with a layer of polyamide, one covered on side with at least layer of polyethylene, either length is 525 mm or more mm or 525 length is — of polymers ethylene g/cm 0,94 of gravity a — having in ink colours, to plus achieve multiple colours in ink specialist on one and side of the film, one colour on the opposite side, the graphic design also has the following characteristics: film the of length the along spaced equally and repetitive — is — of the film the back or front equally and visibly aligned when is viewed from either on covered alcohol vinyl ethylene of layer core a with barrier tri-layer a of — consisting 55 of thickness total a — having mm — but than 600 mm or more not more of 500 having a diameter and undulations, embossed with surface relief raised — a mm 0,125 than more of thickness — a — mm mm ± 0,003 of a thickness 0,019 whose individual designs alternating different two of consisting graphics permanent — with Description Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours base four using by achieved is which design, film embossed graphic of polyethylene, Film of a kind ribbon used for typewriter Printed a with printed film Poly(ethylene) polyethylene: of predominately film with: layered film Tubular (EVA) acetate vinyl Ethylene 20 30 91 40 30 TARIC
CN code ex 3920 10 25 ex 3920 10 28 ex 3920 10 28 ex 3920 10 40 ex 3920 10 89 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 187
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2021 31.12.2018 31.12.2019 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m, consisting of three or four m, consisting of three μ
m μ m, μ
m or more but not more than 13,5 μ m or more but not than 97 μ and and layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm mm or more but not than 1,2 of a total thickness 0,8 layer, total thickness of 11,5 mm, 0,1 than more not of thickness the — with — printed on coatings to allow banknote printing both with specialised security sides containing a mixture of polypropylene each layer and polyethylene, layers, layer with a core whether or not containing titanium dioxide, having: — but MPa of 120 MPa or more not more than 270 strength in the machine direction a tensile MPa than 40 but not more more — MPa or of 10 direction transverse in the strength tensile a as determined by method test ASTM D882/ISO 527-3 or whether layer core a with acetate, and vinyl ethylene of copolymer polypropylene and a dioxide, having: not containing titanium 55 of thickness — a — modulus of 0,30 but not more than 1,45 in the machine direction a tensile GPa or more GPa, GPa 0,70 than more not but more or GPa 0,20 of direction — transverse the in modulus a tensile Description Composite sheet containing an acrylic coating and laminated to a high-density polyethylene high-density a to laminated and coating acrylic an film: 75 containing polypropylene than sheet oriented more Composite — not biaxially of of and a polyethylene on of one side coextruded layer a with thickness polypropylene oriented film Biaxially Sheets total a of film, oriented Mono-axial Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of 40 30 40 60 70 TARIC
CN code ex 3920 10 89 ex 3920 20 21 ex 3920 20 21 ex 3920 20 29 ex 3920 20 29 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 188
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
m, containing 30 or μ using a glossmeter (as glossmeter using a
o m or more but not m or
μ
m μ m or more but not than 80 μ
)
2 m composed of a blend of a copolymer of propylene with ethylene and a copolymer μ — each layer containing a mixture of polypropylene and polyethylene, and polypropylene of mixture a containing layer — each — % by other polymers, weight of containing not more than 3 layer, core the in dioxide titanium containing not or — whether — thickness of not more than 70 of an overall than 223 coated or covered on (SEBS) one side with a layer of of styrene-ethylene-butylene-styrene of polyester (SEBS) and a layer copolymer of styrene-ethylene-butylene-styrene microscopic, of a thickness of 60 more but not more than 40 to 100 parts of plasticiser parts of poly(vinyl chloride) Film of a specular gloss of 70 or more, measured at an angle of 60 determined by determined the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl but mm or more 0,26 thickness of of a coated on of plastic, layer both chloride) with a sides of polyethylene, film in mm, covered on with a protective the gloss surface not more than 1,0 use in the manufacture mm, for 450 but than 1 mm or more not more 000 a width of 1 of rolls ( of goods of heading 9403 Description Co-extruded trilayer film, trilayer even Co-extruded holes, any without rays, ultraviolet against sheet Laminated or strip, consisting of of a a thickness film of 181 stabilized chloride), poly(vinyl of Sheeting 94 93 94 92 92 TARIC
CN code ex 3920 43 10 ex 3920 20 80 ex 3920 43 10 ex 3920 49 10 *ex 3920 20 29 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 189
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m, μ 0 % 0 m or more but
μ m or more but not m or more μ
m, consisting especially of a layer containing carbon black layer a of m, consisting especially μ
m μ m, consisting of one layer which is metallised only containing each and one or two layers metallised which is m, consisting of one layer m, either: μ μ plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet pattern, covered on pyramidal embossed one totally side with a release in a regular plastic — of fillers % or more containing by weight 45 support a — on or more mm but not more than 19 than 350 not more 25 or mass, the in dyed — only side one on metallised and mass the in — dyed 120 a colouring throughout and/or UV-absorbing the material mass, uncoated with an adhesive or material any other exceeding 90 each containing a colouring and/or UV-absorbing material one or two layers consisting of material other any or adhesive an with uncoated mass, throughout the Description Film of a (polyvinyl)chloride-copolymer (MIL-PRF-25690) a 4366 of Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other EN Film standard to conforming 3,5 thickness of mm containing aluminium trihydroxide, of a of poly(methyl methacrylate) Plate polymethylmethacrylate of a thickness of 50 of of poly(methyl methacrylate), film Biaxially-oriented Sheets Coextruded of a thickness 50 opaque sheet of poly(ethylene terephthalate), than thickness of not more not coated with an adhesive, of a film, terephthalate) Poly(ethylene only, thickness of not of a more than 120 total of poly(ethylene terephthalate) Film only, thickness of not more than of a total of poly(ethylene terephthalate) film Laminated 95 30 20 30 40 02 08 12 18 TARIC CN code ex 3920 43 10 ex 3920 49 10 ex 3920 51 00 ex 3920 51 00 ex 3920 51 00 ex 3920 62 19 ex 3920 62 19 ex 3920 62 19 ex 3920 62 19
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 190
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2022 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m μ
m, coated on one side m, coated μ 0 % 0
m, m) μ μ m and having a surface resistivity of not more than of not more m and resistivity having a surface μ m (± 3 μ
)
2 silica or aluminium oxide has been dispersed and of a thickness of not more than 2 aluminium oxide thickness of not more or has been dispersed and of a silica stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar or bags satchels, school of or thereof, and accessories clothing and badges, safety stickers containers ( with a layer of aluminium oxide of a thickness not more than 35 nm resin, acrylic epoxy of layer a with sides both on — coated — thickness of 37 of a total one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 10 000 ohms (per square) (as determined by the ASTM D 257-99 method) which in matrix polymeric a of consisting layer — barrier than of a thickness not more 20 gas a with side one least at on — coated Iridescent film of polyester and poly(methyl methacrylate) Description Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety of manufacture the for pattern, pyramidal a in embossed sheeting polyester Reflecting than 12 of a thickness not more film, Poly(ethylene terephthalate) of poly(ethylene terephthalate): or rolls Sheets coated on polyester, similar or poly(ethylene naphthalate) poly(ethylene terephthalate), of Film film: terephthalate) Poly(ethylene 73 40 20 38 48 52 60 TARIC
CN code ex 3920 62 19 ex 3920 62 19 ex 3920 62 19 ex 3920 62 19 ex 3920 62 19 ex 3920 69 00 *ex 3920 62 19 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 191
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2018 31.12.2019 31.12.2019 31.12.2019 Supplementary unit — — — — p/st —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
m, μ
m m, μ μ 0 % 0
m or more but not than 350 μ m or more but not more than 120 but not more more m or than 50 but not more more m or μ μ 7 nm or more but not more than 80 nm, more but not more nm or 7 and talc, based polymer, poly-glycol ester acid) poly(lactic weight of modified acid), weight of additives modified poly(lactic — with a width of 800 mm or more but not more than 1 600 mm 600 — but not than 1 mm or more more with a width of 800 — coated on both sides with layers of organic substances on the basis of acryl a thickness — tension of 36 Dyne/cm with a surface or more but not than 39 Dyne/cm, — %, than 93 of more with a light transmission %, 1,3 than more not of value haze a — with 10 of thickness total a — with — and not than 10,50 % by acid) more % by composed weight of poly(lactic more than 85 of 20 of thickness a — having 13432) EN method the by determined (as compostable and — biodegradable — and not than 15,75 % by acid) more % by composed weight of poly(lactic more than 80 of 45 of thickness a — having 13432) EN method the by determined (as compostable and — biodegradable tri-isobutyl phosphate as a plasticiser Description Transparent poly(ethylene terephthalate) film: terephthalate) poly(ethylene Transparent mm 1,5 naphthalene-2,6-dicarboxylate) than poly(ethylene film: more of oriented not Film biaxially of film: Monolayer, thickness shrink a oriented, with transverse fibre-board Monolayer, vulcanised painted of Sheets % of % or more but not than 28 containing by film weight 25 Poly(vinyl butyral) 76 20 50 60 10 51 TARIC CN code ex 3920 62 19 ex 3920 69 00 ex 3920 69 00 ex 3920 69 00 ex 3920 79 10 ex 3920 91 00
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 192
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m μ
3 % 3 m, μ
m, μ
m or more, but not than 14 more m), μ μ
which silica has been dispersed and of a thickness not more than 2 which silica hexanoate) as a plasticiser, except poly(vinyl butyral), material any other adhesive or mm than into account and of more 0,2 a thickness of poly(vinyl butyral) thickness of 50 — bis(2-ethyl of triethyleneglycol % than 30 % or more but not containing by weight 26 — mm but mm or more not more than 1,50 with a thickness of 0,73 laminated film of on films, metallised poly(ethylene terephthalate) the external sides only, and characteristics: following having the — % or more, of 50 transmission a visible light but not coated with an of poly(vinyl butyral) — coated on one or both sides with a layer butyral) poly(vinyl of presence the taking without mm 0,2 than more not of thickness total — a a as % of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) than 31 more but not % or 29 plasticiser — than of a thickness not more 20 — in which matrix consists of a polymeric layer one coated on with a gas barrier side least at 5 of thickness — a — mm, mm or more, but not more than 532 a width of 478 by determined C-2318 JIS (as a film MPa or more for — at break of 78 strength a tensile Description Poly(vinyl butyral) film having a graduated coloured band weight coloured by graduated film: containing a butyral) band having Poly(vinyl colour film graduated butyral) a Poly(vinyl with film on one or both or sides, not metallised whether or poly(ethylene terephthalate), of Film butyral) poly(vinyl trilayer with Co-extruded rolls, film: in Polyamide sheets, imide Polyether 52 91 93 95 30 35 TARIC CN code ex 3920 91 00 ex 3920 91 00 ex 3920 91 00 ex 3920 91 00 ex 3920 92 00 ex 3920 99 28
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 193
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2021 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous m, μ
m) μ
m μ m or more but not more than 350 more but not m or μ
m but not more than 244 m but not more μ
m), μ m), μ 50 polypropylene copolymer of 50 — poly (tetramethylene ether glycol), ether (tetramethylene — poly methane, (4-isocyanotocyclohexyl) — bis 1,3-butanediol, or — 1,4-butanediol mm, — but mm or more not more than 5,0 with a thickness of 0,25 surface, one on pattern regular a with — embossed sheet release a with covered — and D2457 ASTM to according polyethylene/ degrees of 90 than consisting more of layer gloss a adhesive — with bonding heat a with side metallised the on — covered film terephthalate) poly(ethylene protective a with side other the on — covered 204 than more of thickness total a — with covered on film one side with a removable protective — thickness of by C-2318 a film 50 JIS for determined break of (as an elongation at or more % °C, 226 of (Tg) point transition glass — a — a continuous of 180 temperature service °C (as determined by UL-746 B for a film thickness — thickness of 25 by of VTM-0 (as determined UL 94 a film for a flammability Description Polymer film containing the following monomers: following the containing film side: Polymer one on metallised film polyurethane Transparent polyurethane Thermoplastic film, of a thickness of 250 40 45 50 TARIC CN code ex 3920 99 28 ex 3920 99 28 ex 3920 99 28 ______
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 194
31.12.2019 Date foreseen for mandatory review
31.12.2018 31.12.2021
2 Supplementary unit m — —
duty 0 % 0 % 0 % Rate of autonomous
m, μ
m but not more than 760 m but not more μ (as determined by test method ASTM E 313-10), ASTM D 1003-11), D2457), 4287), method ISO — not self-adhesive, — not — mm stacked films than 1,0 of more an index but than 2,5 of yellow lower not more for 10 — by method (as determined test mm stacked films % for 10 a light transmission higher to 87 mm, — mm or more, but not more than 7,6 thickness of 0,38 a total cm, — or more, but not more than 305 cm a width of 99 of a kind used in the production of laminated safety glass mm), 10 (± mm 1640 of width — a — or more but degrees not more than 3,8 by a gloss (as determined of 3,3 the method ASTM — roughness of 1,9 a surface but by the not more than 2,8 Ra or more determined Ra (as 365 than more of thickness — a — method: Shore A (ASTM D2240)), by the determined (as 4) 90 (± hardness of a — by the method: % (as determined EN ISO 527) an elongation to break of 470 gold, with alloyed not or whether metal, of coating a with — microspheres layer, adhesive — an — on one side, or poly(ethylene terephthalate) of silicone layer with a protective and side, other the on terephthalate) poly(ethylene of layer protective a — with Description Thermoplastic polyurethane film extruded, with: extruded, film polyurethane Thermoplastic with: rolls containing: in properties, foil conducting polyurethane with thermoplastic resin, Matt, epoxy of consisting rolls, on Sheets 55 65 70
TARIC CN code ex 3920 99 28 ex 3920 99 28 *ex 3920 99 28
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 195
31.12.2019 Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2021
2 Supplementary unit m — — — —
duty 0 % 0 % 0 % Rate of autonomous m or more but m or more μ
0 % 0
)
2
(± 3) (as determined by the method EN ISO 527) 0 % 0
2
m, μ m, a tensile strength at break of 20 MPa or more but not more than 55 MPa than 55 but not more more MPa or of 20 break at strength tensile m, a μ — a width of more than 900 mm but not more than 1 016 mm, 016 — mm but not more than 1 a width of more than 900 finish, matt — a — a thickness of 0,43 mm (± 0,03 mm), — %, % or more but not than 520 an elongation to break of 420 N/mm 55 of strength tensile — a not more than 90 50 of thickness — a and °C, 260 of point melting — a D792) (ASTM 1,75 of gravity specific — a ( for use in the manufacture of semiconductor devices — with a width of 5 cm or more but not more than 100 cm — cm or more but not than 100 with a width of 5 m 000 2 than more not of length a — with — method: Shore A [ASTM D2240]), by the determined (as 4) 90 (± hardness of a mm, 6,35 of (waves) inside — wrinkle mm 0,025 of flatness — a % but than % or more not more 900 and an elongation at break of 250 Description Thermoplastic polyurethane foil in rolls with: rolls in foil polyurethane Thermoplastic material plastic fluorinated film of with: Poly(1-chlorotrifluoroethylene) membranes rolls, Ion-exchange in up a thickness of 34 of a vinyl alcohol copolymer, of soluble Film in cold water, put film, Tetrafluoroethylene 75 25 55 65 70 TARIC CN code ex 3920 99 28 ex 3920 99 59 ex 3920 99 59 ex 3920 99 59 ex 3920 99 59
M7 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 196
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2022 31.12.2018 31.12.2020 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m, μ
m or more but not than 36 μ and a maximum length of 300 m, used for joining electronic components production the of in joining electronic 300 maximum length of m, used for and a displays plasma LCD or 0,10092 than more not but more 0,09435 or — with a thickness of 2,29 mm (± 0,25 mm), and promoter, adhesion foraminous a with — surface-treated — material of textile and a layer film to a polyester laminated anhydride) poly(epoxy or — polyamide-6 present if % of polytetrafluorethylene — % or more but not than 9 7 % of inorganic fillers — more but not than 25 % or more 10 mm, than170 more not but more or mm 98 of width — a 15 of thickness — a of a kind used for the of alkaline battery separators manufacture Description than 3,15 width of 1,5 but not more of a mm mm or more rolls, in Anisotropic conductive film, with: foam: rolls, polyurethane of gravity and of a specific %) 15 mm (± thickness of 3 of polyurethane foam, a Sheet of open-cell form of the Rolls in film, polyethylene grafted acid containing by weight: structure, cellular Blocks with acrylic microporous, Transparent, 20 10 20 30 40 TARIC
CN code ex 3920 99 90 ex 3921 19 00 ex 3921 19 00 ex 3921 13 10 *ex 3921 13 10 ______
M7 M8 M6 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 197
31.12.2022 Date foreseen for mandatory review
31.12.2021 31.12.2022 31.12.2022
2 Supplementary unit — m — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
m μ
)
2 m, μ
m
μ m and 0,1 /s or more according to ISO 5636-5
μ
2 /cm
3 m or more, but not more than 50 μ m or more but not than 50 more μ whether or not containing a coating of aluminium oxide on both sides, — a width of 15 mm or more but not more than 900 mm, 900 than more not but more or mm 15 of width — a 000 m, and — a length of more than 200 m but not more than 3 0,02 between size pore average — an non-woven cloth with: non-woven cloth mm, — mm but not more than 0,20 thickness of more than 0,05 total a and 811, ISO to according kPa 200 and 5 between pressure entry water — a cm 0,08 of permeability air — an — one microporous polyethylene layer between two microporous polypropylene layers and mm, 170 than more not but more or mm 65 of width — a mm, — mm or more but not than 0,03 thickness of 0,01 a total — a porosity of 0,25 or more but not than 0,65 — a width of 1 600 mm or more but 15 not of more thickness than membrane — a 1 730 mm, and ( for use in the manufacture of a bi-component ePTFE membrane with polyethylene and polypropylene, film each shrinkage, (TD) direction production transversal — zero 10 of thickness total — a Description Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded polyester a to laminated (PTFE) polytetrafluorethylene of membrane Porous with: having: foil rolls, separator in multilayer (ePTFE) Multi-porous Polytetrafluoroethylene expanded of membranes Microporous of polypropylene, film of polypropylene Microporous monolayer film or a microporous trilayer 50 60 70 80 TARIC CN code ex 3921 19 00 *ex 3921 19 00 *ex 3921 19 00 *ex 3921 19 00
M7 M8 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 198
31.12.2018 Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018
2 Supplementary unit — — — — — m —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous m, μ m but μ m but not more μ m but not more than m but not more μ m or more but not more m or more but not m or μ μ m but not more than 15 m but not more 0 % 0 μ m μ
)
2
)
2
m μ
m, μ
m and a layer of regenerated cellulose of a thickness of 10 a thickness of of cellulose of regenerated m and a layer m μ m, μ μ
than 30 not more than 40 150 than 40 than 140 with glass fibres — than 100 with a thickness of more film a poly(ethylene terephthalate) — more than 20 a synthetic rubber with thickness of of an adhesive layer 35 than more of thickness a with liner terephthalate) poly(ethylene transparent a — and triazine (T) resin mixed with epoxide resin, measuring: — 469,9 mm (± mm) 2 × 622,3 mm (± mm), 2 or — 469,9 mm (± mm) 2 × 414,2 mm (± mm), 2 or — 546,1 mm (± mm) 2 × 622,3 mm (± mm 2 ( for use in the manufacture of boards printed circuit facture of filters for kidney dialysis equipment ( facture of for filters kidney dialysis equipment rectional nonwoven poly(ethylene and terephthalate) impregnated with polyurethane or epoxide resin — with a thickness of more than 8 of phenolic material a primer Description Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manu the in use for non-woven, a of support a on polytetrafluoroethylene microporous of Strip of polyethersulfone, of a thickness not more than 200 Film of polyethylene consisting of of a thickness 90 a layer film, Cellular (B) of: reinforced or of poly(butylene terephthalate), Composite of poly(ethylene terephthalate) plate bismaleimide consisting or unidi of layer a with on both sides or on one side laminated film, terephthalate) film Poly(ethylene resin Multilayer ester cyanate containing fibreglass reinforced Pre-impregnated 93 95 96 10 20 30 20 TARIC CN code ex 3921 19 00 ex 3921 19 00 ex 3921 19 00 ex 3921 90 10 ex 3921 90 10 ex 3921 90 10 ex 3921 90 55
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 199
31.12.2020 31.12.2019 Date foreseen for mandatory review
31.12.2019 31.12.2020 31.12.2018 31.12.2018
2 2 Supplementary unit — — m m — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous using
o
)
2
0 % 0 m,
2 μ
)
2 ethyl hexanoate) as plasticiser, Prepreg sheets or rolls containing polyimide resin — or Nylon/Polyester blended % Nylon Taffeta, Taffeta of 100 layer comprising a core polyamide, with sides both on — coated 135 than more not thickness total a — of g/m 80 than more not weight total a — of ( for use in encapsulating semiconductor systems inorganic fillers mm), — 0,01 mm(± with a thickness of 0,05 layer with a metal laminated — 29,75 di (2- than 40,25 containing by weight but not more triethyleneglycol or more % of % — by determined ISO 9050 the % or more (as standard); of 70 with a light transmission — by (as determined the ISO 9050 % or less standard); 1 with an UV transmission of mm) 0,043 (± mm 0,43 of thickness total a — with coated or covered with a copolymer of tetrafluoroethylene fabric, Woven polytetrafluoroethylene or acid carboxylic ending in alkoxy side-chains having perfluorinated trifluoroethylene and sulphonic acid groups, whether or not in the potassium or sodium form salt by (as determined a glossmeter the ISO 2813:2000 method), consisting of of a layer joined of coloured poly(vinyl by and chloride), a metallised a layer poly(ethylene terephthalate) of domestic coating panels and a kind doors used of adhesive coating, for in the manufacture appliances ( Description Glass fiber-reinforced sheets of reactive, halogen-free epoxid resin with hardener, additives and additives hardener, rolls, with in resin sheet, epoxid fabric film: halogen-free layered butyral) reactive, Three poly(vinyl of insulating sheets UV fiber-reinforced and Glass infra- Heat-, Film, of a specular gloss of 30 or more but not more than 60 measured at an angle of 60 25 21 91 20 29 10 40 50 30 93 TARIC CN code ex 3921 90 55 ex 7019 40 00 ex 3921 90 60 ex 5407 71 00 ex 7019 40 00 ex 3921 90 55 ex 3921 90 55 ex 3921 90 60 ex 5903 90 99 ex 3921 90 60
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 200
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2021 Supplementary unit p/st — p/st
duty 0 % 0 % Rate of autonomous 0 % 0
discharge (ESD) and outgassing properties, surface or cosmetic damage and — consisting of antistatic materials or blended thermoplastics proving or blended electrostatic thermoplastics special materials consisting of antistatic — — having non porous, from abrasion resistant or impact resistant surface properties, wafers or photomask the protects that system retainer designed specially a with — fitted seal, gasket a without or — with of a kind used in the photolithography or other semiconductor production to house photomasks or wafers ends, both at bosses aluminium — with resin, epoxide with impregnated fibres carbon of overwrap an in embedded — wholly mm, — mm or more, but not more than 368 of 213 of a diameter mm and 260 — mm or more, but not more than 1 a length of 860 — or more, but not more than 50 of 18 litres a capacity litres Plastic cover with cips for the exterior rear-view mirror of motor vehicles Description Photomask or wafer compacts: wafer or Photomask hydrogen: compressed for container, Polyethylene 10 10 10 10 10 TARIC
CN code ex 3926 30 00 ex 8708 29 10 ex 8708 29 90 ex 3923 30 90 ex 3923 10 90 ______
M7 M6 M7 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 201
Date foreseen for mandatory review
31.12.2022 31.12.2021 31.12.2018 31.12.2021 31.12.2018 31.12.2018 Supplementary unit — — — — — p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2 m or more but m or more not more μ
)
2
0 % 0
)
2
m μ bonate, not chromed, for use in the manufacture of goods of Chapter 87 ( of goods not chromed, for use in the manufacture of Chapter 87 Electroplated interior or exterior decorative parts consisting of: — (ABS), whether or not mixed with polycar a copolymer of acrylonitrile-butadiene-styrene chromium and nickel copper, of — layers ( of heading for motor vehicles 8701 use in the manufacturing of parts for to 8705 of to a backing-strip lines or in a grid-pattern in parallel heat-sealed pyramidal pattern, regular covered on or of knitted woven one fabric side with plastic material material, plastic than 80 ( suspension systems Description Plastic logo of the automobile manufacturer with mounting brackets on the back side, whether or whether side, back the on brackets mounting with manufacturer automobile the of vehicle logo motor Plastic of manufacture the in use for implant spring breast leaf for traverse embossed of poly(vinyl a in chloride) tape, consisting of a facing-strip sheeting or Reflecting shell plastic Silicone reinforced fibre of 4,5 of a polymer divinylbenzene, Microspheres of a diameter Glass 30 34 20 20 30 10 15 TARIC
CN code ex 3926 30 00 ex 3926 90 92 ex 3926 90 92 ex 3926 90 97 ex 3926 90 97 *ex 3926 30 00 *ex 3926 90 97 ______
M8 M6 M8 M7 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 202
31.12.2018 Date foreseen for mandatory review
31.12.2019 31.12.2019 31.12.2018 31.12.2018
31.12.2018 31.12.2021
2 Supplementary unit — — p/st p/st m p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous m or μ
m μ 0 % 0
m μ or more but not more than
2
m or more but not more than 49,6 μ m or more but not than 4,6 m and of a weight of 21 g/m m and of a weight of 21 μ μ
2 methacrylate, of a diameter of 3 of a diameter methacrylate, — with or without polycarbonate, of acrylonitrile-butadiene-styrene — coated with a copper, nickel and a chrome layers, — thickness of coating 5,54 with a total or polycarbonate, of a kind used acrylonitrile-butadiene-styrene for the of remote manufacture controls buttons steering pad switches coated on for Polycarbonate control interface the outside with paint scratch resistant 200 more but not more than 1 and paint, acrylic silver-colour — a paint scratch-resistant transparent — a of a kind used in the manufacture of car radio front panels 42 g/m Description Housings, housing parts, drums, setting wheels, frames, covers and other parts of parts other and covers frames, and isobornyl methacrylonitrile copolymer of acrylonitrile, of a Unexpansible microspheres wheels, setting Parts of car radio and front car air-conditioner panels drums, parts, housing with Housings, coated resin, polycarbonate of made element Knob front panel, made of Bisphenol of car radio A-based polycarbonate decoration product Flat of polyethylene, in opposing perforated directions, of a thickness of 600 Die-cast 37 40 25 30 33 50 55 65
TARIC CN code ex 3926 90 97 ex 3926 90 97 ex 3926 90 97 ex 8538 90 99 ex 3926 90 97 ex 3926 90 97 ex 3926 90 97 *ex 3926 90 97 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 203
Date foreseen for mandatory review
31.12.2021 31.12.2021 31.12.2018 31.12.2020 31.12.2021 31.12.2020 Supplementary unit — — — — p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
0 % 0
used in car parking aid sensor systems parking aid car used in strings, — textile mm, 3,2 of thickness wall — a and ends, both on pressed terminal hollow metal — a brackets, mounting more or — one kind of of goods used in the manufacture of Chapter 87 Vulcanized rubber endless transmission belt with of trapezoidal cross-section (V-belts) longi ( of goods use in the manufacture of Chapter 87 side for on the inner tudinal V-ribbed pattern mm, in the shape of in the of place of mold not more than split outflow of the material 0,25 a rectangle: mm; — mm or more but not than 825 with a length of 72 — mm mm or more but not than 155 more with a width of 18 hose, rubber flexible — one and hose, plastic — one Description Silicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), of a kind a of mm), 0,1 mm/– 0,0 (+ mm 15,4 of diameter inner an with ring, decoupling Silicone with hose brake permissible Siliconated vulcanised rubber thread and cord Rubber with monomers), (ethylene-propylene-diene rubber vulcanised of made Gasket supply air intake hose to the combustion for Air part of the engine comprising at least: 10 10 10 77 10 20 20 10
TARIC CN code ex 4010 31 00 ex 4010 33 00 ex 4007 00 ex 4009 42 00 ex 4010 39 00 ex 4016 93 00 ex 4016 99 57 *ex 3926 90 97
M8 M6 M7 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 204
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2021 31.12.2022 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — p/st —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 )
)
2
2 0 % 0
)
2
least five plastic clips for use in the manufacture of goods of Chapter 87 ( of goods use in the manufacture clips for of Chapter 87 plastic five least — metal clips, — metal resonator a not or — whether ( for use in the manufacture of goods of Chapter 87 prepared, but not further retanned without wool on, tanned or skin leather, Sheep or lamb of heading 4114 other than leather whether or not split, whether or prepared, but not further retanned on, tanned or without hair or kid skin leather, Goat of heading 4114 other than leather not split, of other animals, without Leather hair on, prepared than not tanned, further other than of leather heading 4114 Description Rubber bumper strip with a silicone coating of a length not more than 1 200 mm and with at with and mm 200 1 than more not length a ( of capacitors coating electrolytic silicone of a manufacture with the strip for bumper stoppers Rubber sealing rubber bladder Soft moulding Tyre split, chrome dry tanned Buffalo leather, synthetic retanned (‘crust’), 20 20 30 10 TARIC
4105 10 00 4105 10 00 4106 21 00 4106 31 00 4106 32 90 4106 40 4105 30 90 4105 30 90 4106 22 00 4106 92 CN code ex 4016 99 57 ex 4016 99 97 ex 4016 99 97 *ex 4104 41 19 ______
M6 M8 M6 M7 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 205
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 Supplementary unit — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2 5,2 % 5,2 0 % 0
)
2
)
2
-phenylenediamine and isophthalic acid -phenylenediamine and isophthalic m — of a length of 1 270 mm or more, but not more than 3 200 mm, 200 mm or more, but not more than 3 270 — of a length of 1 mm, 000 — mm or more, but not more than 2 of a width of 150 mm, — mm or more, but not more than 4 of a thickness 0,5 and sanded — not planed — not Laminated wood consisting of two layers of sheets for veneering: — mm, but than mm or more not more 320 a width of 210 mm, — but not than 450 mm or more more a length of 297 mm, — but mm or more not more than 0,8 a thickness or 0,45 ( 4911 or 4420, 4421, 4820, 4909 heading within falling products of manufacture the in use for or bleached, of silk entirely not sale Yarn spun silk waste (noil), put from up entirely for retail ( single yarn, the manufacture of tampons for of and core, terephthalate) poly(ethylene — a — and poly(ethyleneisophthalate), of a copolymer poly(ethyleneterephthalate) an outer layer ( for use in the fabrics manufacture of filtration Description Okoume veneer sheets: veneer Okoume polycondensation the by obtained of: polyamides consisting aromatic dtex, of 30 solely than sale, unbleached, than yarn spun not put Silk yarn (other scoured silk waste) up from retail for fibres more textile not synthetic of than 989 Six ply yarn of bleached cotton, measuring 925 but not more dtex per dtex or more of yarn Yarn monofilament Bicomponent 10 10 10 20 10 Fabrics for the manufacture of bandages, dressings and medical gauzes medical and dressings bandages, 10 of manufacture the 10 for 10 Fabrics 20 20 TARIC 5208 11 10 5208 11 CN code ex 4412 99 40 ex 4412 99 50 ex 5005 00 10 ex 4408 39 30 ex 4412 99 85 ex 5004 00 10 ex 5005 00 90 ex 5205 31 00 ex 5402 45 00 ex 5402 47 00
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 206
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2022 31.12.2018 31.12.2018 Supplementary unit — — m — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 )
2
)
2 -phenylenediamine and p -phenylenediamine and 3,4'- p
)
2
0 % 0 0 % 0
)
2 –oxybis (phenyleneamine) ′ of a wick containing 1 000 continuous filaments or more but not more than 25 000 continuous 000 continuous or more but filaments not more than 25 of a wick containing 1 of 0,12 g but or more of a weight per metre not more than 3,75 g and length of of a filaments, ( yarn of carbon-fibre 100 the manufacture m or more, for the food for fabrics of filtration % by for use in the manufacture weight polylactide (PLA), 98 industry ( ( mm mm, or for use more but in of not the zippers manufacture more than 0,5 1 acid, terephthalic of copolymer and a polyamide-6,6, polyurethane acid, of a copolymer terephthalic fibres Synthetic staple mm oxybis(phenyleneamine), of a length of not more than 7 3,4 Description Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least at containing dtex, 33 alcohol) than poly(vinyl more of not yarn of filament monofilament ( Yarn of a copolymer acid, for the of surgical sutures of acid manufacture glycollic with lactic Non-textured 14995) EN yarn, single, containing by Synthetic filament in the form weight % or more of acrylonitrile, 85 (norm poly(1,4-dioxanone) Biodegradable of Monofilament polyimide of dimension of with cross-sectional or poly(butylene terephthalate), Monofilaments of polyester Strip yarns of polyamide-6,6 yarns of consisting and of warp filament filament fabric, weft Textile 10 40 30 50 70 10 20 50 20 10 TARIC
CN code ex 5503 11 00 ex 5402 49 00 ex 5402 49 00 ex 5402 49 00 ex 5403 39 00 ex 5404 19 00 ex 5404 19 00 ex 5404 90 ex 5601 30 00 *ex 5407 10 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 207
31.12.2018 Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2018
2 Supplementary unit — — m —
duty 0 % 0 % Rate of autonomous -phenylenediamine m m and
2 μ
0 % 0 0 % 0 or more but not more than 50 g/m or more but not than 50 m or more but not than 280
2 μ Poly(vinyl alcohol) fibres, whether or not acetalized Poly(vinyl alcohol) fibres, Poly(vinyl alcohol) non-wovens, or cut into rectangles: in the piece — of a thickness 200 — g/m of a weight 20 polycondensation of by obtained fibres polyamide aromatic Non-wovens of into rectangles cut or piece the acid, in and isophthalic Description Trilobal poly(thio-1,4-phenylene) fibres poly(thio-1,4-phenylene) Trilobal 20 10 10 10 10 10 10 10 10 30 30 10 60 40 10 10 30 30 TARIC
CN code ex 5503 90 00 ex 5506 90 00 ex 5603 11 10 ex 5603 11 90 ex 5603 12 10 ex 5603 12 90 ex 5603 91 10 ex 5603 91 90 ex 5603 92 10 ex 5603 12 90 ex 5603 13 90 ex 5603 14 90 ex 5603 92 90 ex 5603 93 90 ex 5601 30 00 ex 5503 90 00 ex 5603 92 90 ex 5603 94 90 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 208
31.12.2022 31.12.2018 31.12.2018 31.12.2018 Date foreseen for mandatory review
2 2 2 2 Supplementary unit m m m m
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2 but not more than more but not
2
, with non-isotropic tensile , with non-isotropic
2 ,
2
,
2
or more but not more than 265 g/m or more but not than 265
2 or more, but not more than 60 g/m but not more than 60 or more,
2
and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as seconds or more but not more than 36 of 8 (Gurley) and resistance an air
2 consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of the for suitable un-bonded anchored, fibres, elevated consisting of curly being bonded, area % of the surface extruded and hook 35 the remaining materials, propylene, — weighing 30 g/m 30 — weighing — of polypropylene containing fibres or of polypropylene and polyethylene, with: printed, not or — whether mm in diameter, bobbles of 4 having circular area surface the total % of — on one side, 65 surface, untextured smooth a side other on — and for use in ( the manufacture of napkins and napkin liners for babies articles and sanitary similar Non-woven of spunbonded g/m polyethylene, of a weight of more than 60 polypropylene, Non-wovens of with blown a melt layer, laminated on each side with spunbonded of poly — filaments g/m 150 than more not of weight a — with — and simply cut into squares or rectangles, in the piece or impregnated — not nonconductive nonwovens, of poly(ethylene tereph film Electrically consisting of a central of poly(ethylene tereph aligned fibres on laminated each side with unidirectionally thalate) nonconductive electrical resistant temperature high grade on coated both sides with thalate), g/m resin, weighing 147 80 g/m determined by the ISO 5636/5 method) strength on both directions, to insulation material be used as electrical Description Non-woven: 60 70 70 40 10 60 10 10 50
TARIC CN code ex 5603 12 90 ex 5603 12 90 ex 5603 13 90 ex 5603 92 90 ex 5603 13 10 ex 5603 13 90 ex 5603 93 90 ex 5603 14 10 *ex 5603 12 90
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 209
31.12.2020 31.12.2018 31.12.2021 Date foreseen for mandatory review
31.12.2018 31.12.2018
2 2 2 Supplementary unit m m — — m
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous and
2 ,
2 ,
2
)
2
but not more than 105 g/m but not more than 105
2
or more but not more than 300 g/m or more but not than 300 more
2 or more but not more than 150 g/m or more but not than 150
2 by the ISO 5636/5 method) ISO by the — g/m than 80 of a weight more — determined than 75 8 more but not seconds (as of seconds or (Gurley) resistance an air — g/m of weight 160 on laminated elastomer thermoplastic a of layer central meltblown a of Non-wovens consisting each side with spunbonded of polypropylene filaments of Non-wovens, fibres and of a mixture meltblown staple fibres layers consisting of multiple with on both sides or on one side not laminated or whether polypropylene and polyester, polypropylene of spunbonded filaments with side each on laminated layer, elastomeric an of consisting fabric, Non-woven polyolefin polyolefin filaments: g/m 25 of weight — a — simply cut into squares or rectangles, in the piece or impregnated, — not properties stretch machine-directional or cross-directional — with ( for use in the manufacture of care products infant/child — whether or not laminated on one side with a membrane or a membrane and aluminium membrane a or membrane a with on one side not laminated or — whether of a kind used of for the industrial filters manufacture Description Non-woven of spunbonded polyethylene, with a coating, a with media: polyethylene, bonded spunbonded spun of terephthlate) Non-woven poly(ethylene of consisting Non-wovens, 20 70 80 20 40 50 20 40 TARIC CN code ex 5603 92 90 ex 5603 92 90 ex 5603 92 90 ex 5603 13 10 ex 5603 14 90 ex 5603 93 90 ex 5603 94 90 ex 5603 93 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 210
31.12.2018 Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2021 31.12.2018
2 Supplementary unit m — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 )
2
)
2 -phenylenediamine and
)
2 p ,
2
0 % 0 m), μ m (± 5 m (± μ ,
2
or more, but not more than 500 g/m or more, but not more than 500
2
)
2 — with a weight of 85 g/m 85 of weight a — with ( sutures of surgical the manufacture or braided, with an inner core, for acid, plaited in which material plastic Knitted or woven coated or covered on one fabrics, side with artificial are embedded microspheres — fabric, textile one polyester layer consisting of knitted or crocheted foam, polyurethane of consisting layer — other g/m 150 of weight — a acid, terephthalic of copolymer and a polyamide-6,6, polyurethane — with a constant thickness of 95 of thickness constant a — with covered, nor coated — neither 000 m length, 000m to 5 — of 2 in 1 m wide rolls for the coating suitable of membranes in the manufacture of osmosis osmosis and reverse filters ( mm — mm or more, but not than 5 more a thickness of 1 ( vehicles roof of motor of the retractable use in the manufacture for 3,4'-oxybis(phenyleneamine) Description Nonwovens made of polyester fibres, polyester of made Nonwovens ( of pen the manufacture tips cm, rods, for having fibre a length of not than Acrylic more 50 with: and its copolymers with lactic or of poly(glycolic acid) of poly(glycolic acid) twine Unsterilised fabric textile mm 500 Gauze of cotton, than 1 of a width of less plastic-laminated layers’ Two consisting of warp yarns polyamide-6,6 yarns of and fabric, weft Rubberised textile 10 10 20 60 20 10 91 20 10 TARIC CN code ex 5903 10 90 ex 5903 20 90 ex 5603 93 90 ex 5603 94 90 ex 5607 50 90 ex 5803 00 10 ex 5903 90 99 ex 5903 20 90 ex 5906 99 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 211
Date foreseen for mandatory review
31.12.2019 31.12.2021 31.12.2018 31.12.2018 31.12.2019 Supplementary unit — — p/st — —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
2
m μ alloy, than 150 catalytic particles entrapped within the synthetic fibres, coated or covered on one side with ( polytetrafluoroethylene film, for the manufacture of products filtration Parts of equipment for the purification of water by reverse osmosis, consisting of essentially plastic-based membranes, supported internally by woven or non-woven which textile materials wound are casing of a wall- round tube, and plastic enclosed a perforated in a cylindrical mm, whether or not housed of in a cylinder of wall-thickness thickness of not than more 4 5 mm or more — plastic alloy or alloy, ceramic metal with a of synthetic diamonds agglomerated which are diamonds, the of release constant by effect self-sharpening a — having wafers, of cutting abrasive for — suitable centre, the in hole a containing not or — whether support a on not or — whether and piece per g 377 than more not of weight a — with mm 206 than more not of diameter external an — with Description Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more not of diameter a of spheres embedded are which in adhesive with coated fabrics, Textile polyurethane or not containing whether not containing polyester, felts, Needle-punched synthetic-fibre with impregnated pads, polishing polyester non-woven Multi-layered Discs 30 92 10 10 40 20 TARIC
CN code ex 5911 90 99 ex 8421 99 90 ex 5907 00 ex 5911 10 00 ex 5911 90 99 ex 6804 21 00 ______
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 212
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
2
of the cross-section, not of the cross-section, less than one continuous
2
0 % 0
)
) rollers or ) rollers balls
2 4
N
3 mounted on a substrate for use in the manufacture of semiconductors ( semiconductors of manufacture the in use for substrate mounted on a ( friction components calcined, whether or not with reinforced aramid fibres materials semiconductor production of for oxidation furnaces having, than 65 per l, not more cm volume of made of Ceramic articles continuous oxides, filaments of ceramic containing by weight: — % or more of diboron trioxide, 2 — dioxide less of silicon % or and 28 — more of dialuminium trioxide % or 60 channel which may be open at both ends or stopped at one end Description Probe tips cleaning material consisting of a polymer matrix containing abrasive particles abrasive containing matrix polymer a of consisting material cleaning tips Probe oxide iron than 20 of a thickness less mm, not of mounted, for use in the manufacture material, Friction and oxide mm, on whether or not rolls, Agglomerated mica with a thickness of not more than 0,15 silicon tubes and reactor Silicon carbide holders, of a kind used into for insertion diffusion and oxide, (Si aluminium nitride containing Silicon proppants, Ceramic pieces, of an overall ceramic or mullite consisting of porous catalysts, Supports cordierite for 50 20 10 20 10 20 20 25 30 TARIC
CN code ex 6909 19 00 ex 6805 30 00 ex 6813 89 00 ex 6814 10 00 ex 6903 90 ex 6909 19 00 ex 6909 19 00 ex 6909 19 00 ex 6914 90 00 ______
M7 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 213
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2018 Supplementary unit — — — — p/st —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2 m), μ
m (+/– 5 m (+/– μ m or less, and m or less, μ
of cross section
2 or more
o
m μ of the surface of the cross section one of or more closed channels the surface at the
2
silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than volume less than 9 on of not more the Mohs with a total with a hardness of silicon, scale, cm having, per 65 litres, one duct least and at than 65 litres not more volume of total a with and titanium; aluminium cm both (open on one ends) per or diameter of more than 125 — proof coating of a thickness 45 a scratch mm, — mm or more but not than 1,1 thickness of 0,45 a total mm, 210 — but than mm or more not more 3 a width of 300 mm, 000 — but not than 2 mm or more more a length of 300 — % or more; of 90 transmission a visible light 55 of distortion optical — an 1 of variation thickness total a — with — laser-engraved cm), consisting of tempered glass; provided with a mesh and either film a near-infrared (± 1,5 on one layer anti-reflex with optional additional conductive layer, sputtered or a absorbing film ( or both sides, for use in the of products manufacture falling within heading 8528 tail end Description Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a of dioxide, zirconium and dioxide silicon from with: and pieces, of a blend carbide consisting of silicon of porous catalysts, Supports ceramic for obtained sheet transparent, glass microspheres, consisting Supports of porous from oxides made or filters, for catalysts of primarily ceramics flat Ceramic drawn Alkali-aluminosilicate glass float borosilicate of made wafer Glass cm cm) or more, but not more than 185,42 1,5 cm (± plate of a diagonal Glass size of 81,28 60 70 30 10 25 10 TARIC
CN code ex 6909 19 00 ex 6909 19 00 ex 6914 90 00 ex 7004 90 80 ex 7006 00 90 ex 7007 19 20 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 214
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2020 31.12.2022 Supplementary unit — p/st — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
(± 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film with optional additional conductive layer, or a sputtered absorbing film and a near-infrared anti-reflex layer on one or both sides — of chrome, whether or not a layer and adhesive, hot-melt or tape adhesive break-resistance — a — on and at the back the front side paper side, film protective a release of vehicles of a mirrors kind rear-view used for interior support mirror — a and casing plastic — a circuit integrated — an ( of motor vehicles Chapter 87 use in the manufacture for plate, backing plastic with equipped not or — whether element, heating a with equipped not or — whether display (BSM) Module Spot Blind with equipped not or — whether Description Layered glass with mechanical dimming ability by different angles of incident light comprising: light incident of angles different by ability dimming mechanical with cm cm) or more, but not more than 185,42 1,5 cm (± plate of a diagonal Glass size of 81,28 of: glass consisting Layered mirror, rear-view inside mirrors: self-dimming rear-view Electrochromic vehicle motor for mirror auto-dimming electro-chromic Unfinished 10 30 40 50 TARIC
CN code ex 7007 29 00 ex 7009 10 00 ex 7009 10 00 *ex 7009 10 00 ______
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 215
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2022 Supplementary unit p/st p/st — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m μ
m) μ 0,11 mm or more but not more than 0,13 mm; mm or more but not than 0,13 0,11 — a length of 1 516 mm (± 1 mm); 1 (± mm 516 1 of length — a mm); 1 (± mm 553 of width — a mm); 0,1 (± mm 3 of thickness — a — with a thickness of polyethylene covered film, the back (PE) with protective of the mirror and mg/kg 90 than more not of content lead — a — hours according to ISO 9227 or more spray test salt of 72 a corrosion resistance signalling glassware of loss on ignition 300 tex and of a than 3 but not more more 600 tex or Rovings, 2 measuring method) 2584-94 D ASTM the by determined (as weight by 8 % than more not but more or 4 % of layer 500 with a coated tex, Rovings, than 2 but not more 650 measuring tex or more materials polyurethane whether or not mixed with other 884 tex, coated with a layer of an Rovings, measuring 392 tex or more but not more than 2 acrylic copolymer 9 of filaments continuous glass composed of 033 tex, 2 980 to 1 from Rovings ranging (± 0,5 cathode ray tubes Description Unframed glass mirrors with: mirrors glass Unframed than those of heading 7015), of glass (other not worked, elements than optically Optical other 01 02 03 05 21 22 23 25 10 10 for without fittings, thereof, open, envelopes (including bulbs and tubes), parts and glass Glass TARIC
7011 20 00 7011 20 CN code ex 7019 12 00 ex 7019 12 00 ex 7019 12 00 ex 7009 91 00 ex 7014 00 ex 7019 12 00 ex 7019 12 00 ex 7019 12 00 *ex 7019 12 00 *ex 7019 12 00 ______
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 216
Date foreseen for mandatory review
31.12.2018 31.12.2022 31.12.2020 31.12.2020 31.12.2019 31.12.2022 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous m m m, μ μ μ m or more m or 9 μ μ m or more but not more m or μ
m) μ m or more but not than 5,83 m or more but not than 5,83 μ μ
m / + 1,5 + m / μ m (– 1 m (– m, in which filaments of a diameter of 3 of diameter a of which filaments m, in μ μ
m or of 4,5 m or μ m, in which filaments of a diameter of 6,35 of diameter of a m, in which filaments μ m predominate, other than those treated so as to improve their adhesion so as to improve their m predominate, other than those treated
μ m predominate μ
to elastomers a nominal diameter of a nominal 3,5 diameter but not more than 5,2 of 9 of a diameter with fibres filaments filaments, in which filaments of a diameter of 4,83 predominate filaments, in which filaments of a diameter of 4,83 predominate 7 of nominal diameter more than 7,61 containing 93 % by weight or more of silicon dioxide, of a of 6 nominal diameter other than those treated Description of continuous spun-glass filaments 7,5 obtained from (± %), thereof multiple a or 33 tex of Yarn %) made from continuous spun-glass yarn of 33 S-glass tex or a multiple of 33 13 tex (± Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass 22 1,6 a of obtained from continuous (± of tex), tex of E-glass Yarn spun-glass filaments continuous obtained %), from spun-glass filaments, 7,5 (± Yarn of 11 thereof or a multiple tex 10 15 20 25 30 50 TARIC
CN code ex 7019 19 10 ex 7019 19 10 ex 7019 19 10 ex 7019 19 10 *ex 7019 19 10 *ex 7019 19 10 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 217
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2018 31.12.2018 31.12.2021 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 )
2
transition temperature of 152 temperature transition than 153 more but not °C or according °C (measured IPC-TM-650) of: magnesium oxide, % of — % or more but not than 16 9 % of aluminium oxide, — more but not than 25 % or more 19 % of boron oxide, — % or more but not than 2 0 oxide, calcium — without formaldehyde resin and coated with a resorcinol- a comprising chlorosulphonated latex at least polyethylene high modulus twisted obtained from rubber, impregnated with High modulus (K) cord glass with or resin yarns, coated with a latex comprising a resorcinol-formaldehyde glass filament rubber (HNBR) without vinylpyridine and/or hydrogenated acrylonitrile-butadiene yarns, glass filament obtained from twisted cord impregnated with rubber or plastic, Glass and an resin a resorcinol-formaldehyde-vinylpyridine comprising at least coated with a latex acrylonitrile-butadiene rubber (NBR) yarns, glass filament obtained from twisted cord impregnated with rubber or plastic, Glass and chlorosulphonated resin a resorcinol-formaldehyde least comprising at coated with a latex polyethylene expansion of thermal of rovings, Woven impregnated with epoxy fabrics with a coefficient resin, 30 between °C and 120 of: IPC-TM-650) according to °C (measured and width, and length the in 12ppm per°C than more — not but more or 10ppm per°C than 30ppm glass 20ppm but not thickness, with a more per°C in the more per°C or — Description Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up made filaments, U-glass or K- from obtained plastic, or rubber with impregnated cord Glass ( Non-woven or catalysts product filters of glass for the of air non-textile fibre, manufacture 60 70 80 11 30 20 40 19 55 50 TARIC CN code ex 7019 19 10 ex 7019 19 10 ex 7019 19 10 ex 7019 40 00 ex 7019 19 10 ex 7019 90 00 ex 7019 90 00 ex 7019 90 00 ex 7019 39 00 ex 7019 40 00
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 218
Date foreseen for mandatory review
31.12.2021 31.12.2021 31.12.2018 31.12.2022 31.12.2021 31.12.2021 31.12.2018 31.12.2020 31.12.2022 Supplementary unit — p/st — — — — — — p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
m predominate μ
)
2
)
2
Television pedestal stands with or without bracket for fixation to and stabilization of television of to and stabilization fixation for stands with or without bracket pedestal Television cabinet case/body cm and — cm or more but not than 40 a thickness of 10 — kg or more a weight of 100 mm than 150 not more height of % of silicon mm, containing by weight not more than 1 than 150 not more height of — more of dysprosium, % or and 78 % of iron — more but not than 22 % or more 18 ( of engines of motor vehicles manufacture ( of goods manufacture of Chapter 87 Description Raw material for optical elements of fused silicon dioxide with: dioxide silicon fused of elements optical Non-textile glass fibres in which fibres of a diameter of less than 4,6 for material Raw weight: Pig iron mm, mm, ingots a with a width a length of not of not more than more than 150 350 by Pig iron mm, mm, ingots a with a width a length of not of not more than more than 150 350 containing Ferro-dysprosium, 000 for use in the rpm or more of 2 kN at 7 limit chain with a fatigue timing type steel Roller on use in the threads both ends screw for brake cylinder with Connecting the master rod for 10 77 10 20 10 10 Ferro-silico-chromium 10 10 30 TARIC 7202 50 00 7202 50 CN code ex 7020 00 10 ex 7019 90 00 ex 7616 99 90 ex 7201 10 11 ex 7201 10 30 ex 7202 99 80 ex 7318 19 00 *ex 7020 00 10 *ex 7315 11 90
M8 M6 M8 M7 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 219
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2021 31.12.2020 31.12.2021 Supplementary unit p/st p/st — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous or more, but
o
)
2
o
)
2 not more than 218 — mm, mm or more, but not than 4,11 more a thickness of 2,67 mm, — than 16,01 more, but not more mm or 12,57 width of a — a torque of 18,05 Nm or more, but not more than 73,5 Nm — position of 76 and the nominal an angle between the free position in exercise earth anchors and rolling by mm, compacted sintering than 0,070 not more — of other material whether or not with parts — of other metals whether or not with parts treated surface not or — whether printed not or — whether of a kind used for the production of remote controls and copper, of graphite foil with: Roll of laminate — mm, and but than mm or more not more 620 a width of 610 mm, — mm or more but not than 710 of 690 a diameter for use ( in batteries the rechargeable manufacture of lithium-ion electric for use in the manufacture of tensioners for power transmission belts, for internal combustion engines ( Description Flat spiral spring of tempered steel, with: steel, tempered of spring spiral Flat weights steel Anchor head of hot dipped iron of the kind galvanized ductile cast used in the production of and of 0,001 of diameters but wires mm or more steel consisting of stainless of a mass fleece, Metal Iron 10 60 30 91 20 20 40 TARIC
CN code ex 7410 11 00 ex 8507 90 80 ex 8545 90 ex 7320 90 10 ex 7325 99 10 ex 7326 20 00 ex 7326 90 98 ______
M8 M7 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 220
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m,
μ ,
2
)
2
fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide or and impregnated with resin, fabric with glass-fibre on each side laminated fibre, measuring frequency of 10GHz, as measured according to IPC-TM-650 filler or reinforced with glass-fibre fabric, covered on fabric, both sides with copper foil with glass-fibre or reinforced filler side or on both sides with a copper foil — of any type of nonwoven sheet of paper or one central layer central a least consisting of at — of paper, impregnated with phenolic resin, layers consisting of multiple mm on with a maximum coated thickness of 0,15 one or both sides with a copper film — impregnated with epoxide resin, fabric of fibreglass one consisting layer of at least — covered on one or both sides with copper a thickness of not more than 0,15 foilwith mm and — constant (DK) of with less than a dielectric 3,9 and of less than a (Df) loss 0,015 factor at a 25 than more not of thickness maximum a — with — mm, coated on both with a maximum thickness of 0,15 sides with a copper film 1,09pF/mm of capacitance minimum a — with with deposition consisting Disc (target) of material, molybdenum silicide: and sodium of less or 1mg/kg — containing support aluminium or copper a on — mounted for use in the manufacture of circuit boards ( for use in the boards manufacture of circuit Description dioxide as containing aluminium oxide or titanium of polytetrafluoroethylene, plate or Sheet plates: or covered on one fibre, or not containing and/or glass of polyimide, epoxide resin whether Film resin: Sheet artificial or synthetic of Plates: sheets and rolls Plates, 91 60 10 30 40 50 60 TARIC CN code ex 7419 99 90 ex 7410 21 00 ex 7410 21 00 ex 7410 21 00 ex 7410 21 00 ex 7410 21 00 ex 7616 99 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 221
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2022 31.12.2020 31.12.2019 31.12.2018 Supplementary unit — p/st — — — —
duty 0 % 0 % 0 % Rate of autonomous
) 0 % 0
2
4 % 4 0 % 0 use in the manufacture of goods of heading 8302 ( of goods use in the manufacture of heading 8302 Profiles made of aluminium alloy conforming to EN standard AW-6063 T5 — anodized lacquered not or — whether for 1,2 %) (± 0,8 mm than more not but more — or 1,2 %) (± 0,5 mm of thickness wall a with Sheets and alloys bars of aluminium-lithium % of zinc, and — % or more but not than 7 0,25 % of magnesium, and — % or more but not than 3 1 % of copper, and — % or more but not than 5 1 — % of manganese not more than 1 AMS QQ-A-225, specifications a kind of used consistent with the material in aerospace industry conforming NADCAP process and AS9100) alia mill and obtained by rolling (inter mm mm or more but not more than 0,117 with a layer of copper of a thickness 0,032 Description Slabs and billets of aluminium alloy containing lithium containing alloy aluminium of billets and weight: Slabs by containing alloys aluminium of rods and Bars mm, covered but not more than 6 mm or more 2 of diameter of a Not alloyed aluminium wire, 10 10 30 20 Slabs and billets of unwrought aluminium alloys aluminium unwrought of billets and Slabs 10 40 10 TARIC
7601 20 20 7601 20 CN code ex 7604 21 00 ex 7604 29 10 ex 7604 29 90 ex 7606 12 99 ex 7604 29 10 ex 7605 19 00 *ex 7601 20 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 222
Date foreseen for mandatory review
31.12.2021 31.12.2021 31.12.2019 Supplementary unit m — —
duty 0 % 0 % 0 % Rate of autonomous
— 0,10 % or more but not more than 5 % of copper, and — % or more but not than 5 0,10 % of magnesium, and — % or more but not than 6 0,2 % of zinc, and — % or more but not than 7 0,10 — % of manganese not more than 1 AMS QQ-A-430, specifications a kind of used consistent with the material in aerospace industry conforming NADCAP process and AS9100) alia mill and obtained by rolling (inter in rolls: Aluminium foil — % by weight, having a purity of 99,99 — mm, mm or more but not than 0,2 of a thickness 0,021 mm, 500 of width a — with thick, nm 4 to 3 by layer oxide surface a — with % 95 than more of texture cubic a with — and — % or more 99,98 an aluminium content of — mm mm or more but not than 0,125 a thickness of 0,070 texture cubic a — with of a kind used for high voltage etching Description Wire of aluminium alloys containing by weight: by containing alloys aluminium of Wire parameters: following the with foil aluminium Plain 47 57 10 60 TARIC
CN code ex 7607 11 90 ex 7607 11 90 ex 7605 29 00 ex 7607 11 90 ______
M7 M6 M7 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 223
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2022 31.12.2018 Supplementary unit — p/st — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with: — mm, and but than mm or more not more 605 a width of 595 mm, — mm or more but not than 710 of 690 a diameter for use in ( the batteries manufacture of rechargeable cathodes for lithium-ion electric least: at comprising a resonator, or not with supplying whether air, Assembly for compressed bracket, mounting with not or whether tube aluminium solid — one and hose, rubber flexible — one clip metal — one ( for use in the manufacture of goods of Chapter 87 and mm, 420 than more not but more or mm 60 of diameter outer — an mm — but not than 80 mm or more more a wall thickness of 10 embedded in an overwrap of epoxy-carbon of 172 composite, of a storage capacity fibres l %) and an unfilled weight kg of not (± 10 more than 64 Description with: tubes extruded alloyed aluminium Seamless compressed hydrogen, gas or wholly compressed natural for seamless, Aluminium container, 10 30 80 40 30 20 TARIC
CN code ex 7607 19 90 ex 8507 90 80 ex 7608 20 89 ex 7613 00 *ex 7608 20 *ex 8708 91 99 ______
M7 M8 M6 M7 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 224
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2021 31.12.2019 Supplementary unit p/st — p/st p/st
duty 0 % 0 % Rate of autonomous
0 % 0 0 % 0 )
2
or more, Aluminium engine bracket, with dimensions of: mm — than 200 mm but not more height of more than 10 mm — than 200 mm but not more width of more than 10 mm — than 200 mm but not more length of more than 10 two equipped fixing holes, made of aluminium alloys ENAC-46100 with at least or characteristics: following with EN:1706) norm the on ENAC-42100 (based mm; 1 than more not porosity — internal — mm; outer porosity not more than 2 more or 10 HRB hardness — Rockwell a kind of used in the production of suspensions engines for in motor vehicles systems — of aluminium (CAS RN 7429-90-5) layers consisting of eight or more of a purity 99,8 % — of not more than 3,0, density of each aluminium layer with an optical layer, resin a by separated layer aluminium each — with and PET, of film carrier a — on length in metres 000 50 to up of rolls — on ( shafts rotor tail helicopter production of the in use Connecting components for Description film: Metallised parts Honeycomb aluminium blocks of aircraft of the type used in the manufacture 30 60 70 10 50 40 15 25
TARIC CN code ex 7616 99 10 ex 8708 99 10 ex 7616 99 90 ex 8482 80 00 ex 8708 99 97 ex 7616 99 90 ex 7616 99 90 ex 8803 30 00 ______
M7 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 225
Date foreseen for mandatory review
31.12.2019 31.12.2020 31.12.2022 31.12.2022 31.12.2020 31.12.2018 Supplementary unit — p/st — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
m
μ m
μ
m or more, but not than 5,0 more
μ — a maximum cross-sectional dimension of not more than 50 than more not of dimension cross-sectional maximum — a — 40 of Ohm or more but not than 300 length of 1 metre Ohm at resistance a of a kind used in the production of heated car front windows — of tungsten, % or more and containing by weight 99,95 mm 1,02 than more not of dimension cross-sectional maximum a — with — more and % or a purity by weight of 99 1,0 of size particle — a plate, backing alloy copper-chromium — a and mm, 312 of diameter — a mm 6,3 of thickness — a — % of purity by weight of more than 99,5 mm — but mm or more not more than 0,8 size of 0,2 with a particle coated on one side with an epoxy insensitive to light resin Description of tungsten % or more with: Tungsten containing by wire weight 99 wire Tungsten with: powder Molybdenum with: target sputtering Tantalum powder Magnesium Ground and polished magnesium sheets, of dimensions not more than 1 500 mm × 2 000 mm, 10 20 10 10 35 10 TARIC
CN code ex 8101 96 00 ex 8103 90 ex 8104 30 00 ex 8104 90 00 *ex 8101 96 00 *ex 8102 10 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 226
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2020 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
more, — 35 % (± 2 %) cobalt, %) 2 (± % — 35 nickel, %) 1 (± % — 25 and chromium %) 1 (± % — 19 iron %) 2 (± % — 7 AMS 5842, specifications industry of a kind aerospace used in the material conforming to the 0,224 mm — cm or cm or more and a width of 48,3 cm or more, a length of 180 with a height of 17,8 — kg or more, a weight of 680 by weight of: containing alloy elements % of aluminium — % or more but not than 6 3 % of tin — % or more but not than 5 2,5 % of zirconium — % or more but not than 4,5 2,5 % of niobium — % or more but not than 1 0,2 % of molybdenum — % or more but not than 1 0,1 % of silicon — % or more but not than 0,5 0,1 Description made of cobalt alloy containing, by or wires Bars weight: sponge Titanium ingot, alloy of % by passes through with an aperture weight or more sieve powder a which of Titanium 90 Titanium 10 10 30 40 TARIC
CN code ex 8108 20 00 ex 8108 20 00 ex 8108 20 00 *ex 8105 90 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 227
Date foreseen for mandatory review
31.12.2020 31.12.2020 31.12.2022 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
— with a height of 17,8 cm or more, a length of 180 cm or more, a width of 48,3 cm or more — kg or more, a weight of 680 by weight of: containing alloy elements % of aluminium, — % or more but not than 7 3 % of tin, — % or more but not than 5 1 % of zirconium, — % or more but not than 5 3 % of molybdenum — % or more but not than 8 4 cm or more, — and length cm or more of 450 a of 63,5 with a diameter kg or more, 350 — a weight of 6 by weight of: containing alloy elements % of aluminium, — % or more but not than 6,7 5,5 % of vanadium — % of more but not than 4,9 3,7 — cm, cm or more, but than 23,3 not more a height of 20,3 — cm, cm or more, but not more than 289,6 a length of 246,1 — cm, cm or more, but not more than 46,7 a width of 40,6 — kg, kg or more but not than 965 a weight of 820 by weight of: containing alloy elements % of aluminium, — % or more but not than 6,2 5,2 % of vanadium — % or more but not than 4,8 2,5 Description Titanium alloy ingot, alloy Titanium ingot, alloy Titanium with slab, alloy Titanium 55 60 70 TARIC
CN code ex 8108 20 00 *ex 8108 20 00 *ex 8108 20 00 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 228
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2022 31.12.2017 31.12.2021 Supplementary unit — — — kg —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
2 but not more than 2 % of aluminium but not more than 2 — of a cylinder, in a form a uniform solid cross-section mm, — mm or more, but not more than 5 of 0,8 with a diameter %, — % or more, but not than 0,7 more an aluminium content by weight of 0,3 — %, % or more, but not more than 0,6 a silicon content by weight of 0,3 — %, and niobium a content by 0,1 weight of but not more than 0,3 or more, % 0,2 than more not of weight by content iron — an % of aluminium, for use and in exhaust the manufacture of silencers pipes of not more than 2 subheadings 8708 92 or ( 40 8714 10 — % by weight or more, a purity of 99,995 mm, — mm or more but not than 200 of 140 a diameter kg — kg but than 300 or more not more a weight of 5 Description except those containing by alloys, weight 1 and titanium more titanium or % of and scrap Waste alloy rods complying EN 2002-1, Titanium with standard EN 4267 or DIN 65040 Rods with: and of an alloy titanium wire with: titanium of Bars, rods and wire of alloy of titanium and aluminium, containing % by or more but weight 1 bars cylindrical Forged 10 10 15 20 60 TARIC
CN code ex 8108 30 00 ex 8108 90 30 ex 8108 90 30 ex 8108 90 30 *ex 8108 90 30 ______
M8 M7 M6 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 229
Date foreseen for mandatory review
31.12.2021 31.12.2020 31.12.2022 31.12.2021 Supplementary unit — — kg —
duty 0 % 0 % 0 % Rate of autonomous
0 % 0
— 22 % (± 1 %) of vanadium, and vanadium, of %) 1 (± % — 22 of aluminium %) — % (± 0,5 4 or vanadium, of %) 1 (± % — 15 of chromium, %) — % (± 0,5 3 tin and % of — % (± 0,5 3 of aluminium %) — % (± 0,5 3 4967 4965 or mm, — mm or more, but not more than 100 a thickness of 0,4 and m, 14 than more not of length — a m 4 than more not of width — a Description Wire of an titanium alloy containing by weight: by containing alloy titanium 4928, an standards of AMS Wire with complying wire, (TiAl6V4) alloy Titanium-aluminium-vanadium titanium of alloy an of foil and strip Cold and or hot rolled plates, sheets strips of non-alloyed with: titanium sheets, Plates, 70 80 45 55 TARIC
CN code ex 8108 90 30 ex 8108 90 30 *ex 8108 90 50 *ex 8108 90 50 ______
M7 M8 M7 M8 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 230
Date foreseen for mandatory review
31.12.2021 31.12.2019 31.12.2019 31.12.2022 31.12.2018 31.12.2018 Supplementary unit — — p/st — — kg
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
),
2
0 % 0
)
2 — mm of a width of more than 750 — mm than of a thickness not more 3 — % by weight of oxygen (O containing more than 0,07 mm, — mm or more but not than 159 of 19 a diameter mm, and — mm or more but not than 8 a wall thickness of 0,4 m 18 of length maximum — a Parts of frames and spectacle mountings, including — temples, — and parts blanks of a kind of spectacle the manufacture used for mountings, and frames spectacle for used kind the of — bolts of a titanium alloy of use in tubes, the manufacture bars or ingots enlarged by for the chemical remelting industry ( — of a thickness of 0,4 mm or more but not more than 2,5 mm — but not than 2,5 mm or more more of a thickness 0,4 170 than more not of standard HV1 hardness Vickers the to — conforming of a kind used in the manufacture of welded tubes for nuclear power plant condensers Description Plates, sheets, strips and foil of non-alloyed titanium non-alloyed of foil and strips sheets, Plates, of non-alloyed titanium: or foil Strip with: or an alloy of titanium tubes and pipes of a titanium Seamless ingots of form the in sponges Non-alloy zirconium or ingots, of hafnium for containing by than 0,01 % weight more Antimony 30 20 80 85 30 10 10 TARIC CN code ex 8108 90 90 ex 8108 90 50 ex 8108 90 50 ex 9003 90 00 ex 8109 20 00 ex 8110 10 00 *ex 8108 90 60
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 231
Date foreseen for mandatory review
31.12.2019 31.12.2022 31.12.2020 31.12.2018 31.12.2022 31.12.2020 Supplementary unit — — p/st — p/st p/st
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 0 % 0 0 % 0
)
2
IGBT-modules frame of manufacture the in use for sheets, metal of throating and bordering bending, calibrating, ( parts of motor vehicles Keypads or plastic, of silicone epoxide or wood, resin reinforced — glass fibre plastic, of metal, whether or not with parts — treated, or surface whether or not printed elements, conducting electrical with not or — whether keyboard, the on glued foil keypads with not or — whether foil, protective with not or — whether multilayer or — single Description Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in circuits packaging electronic for for used punching, (AlSiC-9) composite diamonds cutting, carbide (AlSiC) agglomerated drawing, silicon carbide of pressing, aluminium silicon parts cold-forming, of aluminium Alloy of niobium of bars and (columbium) and rods titanium, in the form working for plate of with tools Carrier made tools press spacer drilling tandem Cuboid for and/or Inserts transfer of Set 20 40 30 20 20 20 83 30 10 10 20 10 10 TARIC
CN code ex 8301 60 00 ex 8413 91 00 ex 8419 90 85 ex 8438 90 00 ex 8468 90 00 ex 8476 90 90 ex 8479 90 70 ex 8481 90 00 ex 8112 99 30 ex 8113 00 90 ex 8207 19 10 *ex 8113 00 90 *ex 8207 30 10 ______
M8 M6 M8 M7 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 232
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2019 31.12.2019 31.12.2018 Supplementary unit p/st p/st — p/st p/st
duty 0 % 0 % Rate of autonomous 0 % 0 0 % 0
)
2 0 % 0
— an external diameter of 21 mm or more but not more than 23 mm, — mm or more but not than 23 of 21 diameter an external mm, — but than mm or more not more 23 of 19 a width with screw ring, outer plastic U-shaped — a — and used as an inner ring diameter to the internal fitted an assembly screw 1mm), mm (± — mm or more but not than 136,5 of 99,00 with a diameter aperture ‘ring-pull’ a with not or — whether Metal casing for automobile safety belt pre-tension gas generators Description Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors ( reactors elements nuclear chemical with in absorbing Castors, use neutron for with ends: (elements) filled can modules rods, Aluminium fuel control hexagonal absorber Non-irradiated steel Stainless 70 30 95 70 10 20 50 10 10 40 10 20 10 20 10 TARIC CN code ex 8503 00 99 ex 8515 90 80 ex 8536 90 95 ex 8537 10 98 ex 8708 91 20 ex 8708 91 99 ex 8708 99 10 ex 8405 90 00 ex 8708 21 10 ex 8708 99 97 ex 8302 20 00 ex 8309 90 ex 8401 30 00 ex 8401 40 00 ex 8708 21 90
M6 M7 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 233
Date foreseen for mandatory review
31.12.2022 31.12.2021 31.12.2020 31.12.2018 31.12.2018 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous for use in the
3
)
2
)
2
)
2
)
2
)
2 and a power of not less than 6 kW but not exceeding than 6 not less power of and a
3 mowers of heading 8433 11 90, 11 mowers of heading 8433 10 8433 20 or Spark-ignition reciprocating or combustion Spark-ignition reciprocating rotary internal piston engines, having a cylinder cm capacity of not less than 300 cylinders, — 6 — kW, kW or more, but not more than 80 an output of 75 — continuously and to operate exhaust inlet valves modified in heavy duty applications, ( of heading of vehicles 8427 use in the manufacture for ( manufacture of vehicle mounted control temperature systems ( of vehicle mounted control systems temperature — self-propelled lawn mowers, with a seat of subheading 8433 11 51, and hand-operated lawn hand-operated 20,0 kW, and for the manufacture 51, of: 11 8433 subheading of seat a with mowers, lawn — self-propelled mower, lawn a of that is function main whose 90, 91 8701 subheading of — tractors — four stroke mowers with motor of a cylinder capacity not less than 300 cc of subheading ( 20 8430 subheading of blowers snow and — snowploughs ( of garden equipment of heading manufacture 8432, 8433, 8436 or 8508 Description Compact Liquid Petroleum Gas (LPG) Engine System, with: System, Engine (LPG) Gas Petroleum Liquid cm Four-stroke petrol engines of a cylinder capacity of not more than 250 Compact kW, with 2 or 3 cylinders, for use in the engines Diesel of a power of not more than 15 power engines of not of a than 30 Diesel more kW, with 4 for use in the manufacture cylinders, 10 10 10 10 10 20 20 20 TARIC
CN code ex 8407 90 10 ex 8407 90 ex 8408 90 41 ex 8408 90 43 *ex 8407 33 20 *ex 8407 33 80 *ex 8407 90 80 *ex 8407 90 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 234
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2022 31.12.2021 31.12.2022 Supplementary unit — — p/st p/st —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
) )
2
2
, and
3
more than 130 mm more than 130 4 Cylinder, liquid cooled, compression-ignition engine having: cycle, cm 850 3 than more not of capacity — a ( combustion internal in the manufacture of spark-ignition piston engines of motor vehicles with: housing turbochargers turbine of with exhaust manifold and °C, 050 1 than more not of heat-resistance — a — of 28 wheel, mm or more, but hole has a diameter whereby a turbine not the a hole to insert (CMPS), sensor position camshaft — a and engine, an on mounting for brackets — metal gaskets, more or — two ( of engines of motor vehicles use in the manufacture for throttle, — a sensor pressure boost — a ( of compression ignition engines of motor vehicles use in the manufacture for — a rated output of 15 kW or more but not more than 85 kW, — kW or more but not than 85 output a rated of 15 ( of heading of vehicles 8427 use in the manufacture for Description with: cover with solenoid Fuel injector valve optimized atomization in the for combustion use chamber for head cylinder aluminum or Plastic supply manifold for air Intake to the engine cylinders, comprising at least: 40 30 50 50 55 40 40 60 TARIC
CN code ex 8409 99 00 *ex 8408 90 43 *ex 8408 90 45 *ex 8409 91 00 *ex 8408 90 47 *ex 8409 91 00 *ex 8409 99 00 *ex 8409 99 00 ______
M8 M7 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 235
Date foreseen for mandatory review
31.12.2022 31.12.2021 31.12.2021 31.12.2021 31.12.2022 Supplementary unit p/st — — p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2 0 % 0
)
2
DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686, mm more than 130 than HRC 50 for use in the manufacture of compression ignition engines of motor vehicles ( than HRC of compression ignition 50 use in the manufacture engines of motor vehicles for — an opening of 1 bar or more, but not than 3 more pressure bar, bar, 0,7 than more of pressure closing — a valve one-way — a ( of compression ignition engines of motor vehicles use in the manufacture for or NiCr13Al6MoNb G- DIN standard with complying alloy based nickel precision-cast a — of °C, 100 1 than more not of heat-resistance a — with mm, — mm or more, but not than 180 more of 28 with a diameter — mm mm or more, but not more than 150 with a height of 20 and °C, 050 1 than more not of heat-resistance — a — of 28 wheel, mm or more, but hole has a diameter whereby a turbine not the a hole to insert Injectors with solenoid valve for optimised atomisation in the engine combustion chamber Description High pressure oil jet for engine piston cooling and lubrication with: lubrication and turbochargers: cooling in piston used engine kind for a jet of oil blades, pressure but not more HRC Rockwell hardness 20 or more, with a and exhaust valve alloy intake Metal with High component turbine gas Wheel-shaped with: turbochargers of housing Turbine 10 85 70 80 20 30 TARIC
CN code ex 8409 99 00 ex 8479 90 70 *ex 8409 99 00 *ex 8409 99 00 *ex 8411 99 00 *ex 8411 99 00 ______
M7 M6 M8 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 236
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2020 Supplementary unit p/st — —
duty 0 % 0 % 0 % Rate of autonomous
)
2
fluid per minute, fluid per
3 of 20 mm or more but not more than 40 mm, 15 mm, and — whether or not with conducting horns and connecting sleeves, having an operating distance operating an having sleeves, connecting and horns conducting with not or — whether mm, 350 than more not of length a — with mm, 75 than more not of diameter a — with mm 110 than more not of height a — with — of 200 or more, but an operating pressure bar not more than 350 bar, and control, flow — a valve, relief pressure — a ( of engines of motor vehicles use in the manufacture for cm 400 least at — discharging — with a noise level limited to 6 dBA, 6 to limited level noise a — with — with the inside diameter of the suction opening and discharge outlet of not more than °C 10 – to down temperatures ambient at — working Description Actuator for a single-stage turbocharger: with: single-stage injection a direct for gasoline Actuator for pump pressure high radial-piston Single-cylinder pump: centrifugal phase Single 80 30 20 TARIC
CN code ex 8411 99 00 ex 8413 30 20 ex 8413 70 35 ______
M8 M6 M7 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 237
Date foreseen for mandatory review
31.12.2019 31.12.2019 31.12.2018 31.12.2018 31.12.2020 Supplementary unit p/st — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2 , of the type used in refrigeration equipment the type used in refrigeration , of
3 variable speed motors — consisting of aluminum alloys, aluminum of — consisting mm, — mm or 50 of 38 with a diameter surface, its on formed grooves annular concentric, two — with — anodized, a kind of with petrol engines used in motor vehicles kW, with volume a displacement of not kW or more but not more than 10 of 0,5 rating cm more than 35 Hermetic rotary compressors for Hydro-Fluoro-Carbon (HFC) refrigerants: — (BLDC) driven direct current’ by (AC) or ‘brushless current’ ‘on-off single phase alternate kW 1,5 than more not of rating power nominal a — with of a kind used in the production of household heat pump laundry tumble dryers kW kW but not more than 10 more than 0,4 power of ( products of of heading 8521 or 8528 Description Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power nominal a with cover: compressors, pump scroll Fuel electric variable-speed semi-hermetic or Hermetic conditioning air Vehicle system part, consisting of an open compressor of a shaft reciprocating motor, of an output of not more than 2 use fan with an W, in the manufacture Axial electric for 60 30 30 50 20 40 TARIC
CN code ex 8414 30 81 ex 8413 91 00 ex 8414 30 81 ex 8414 80 73 ex 8414 30 89 ex 8414 59 25 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 238
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2018 31.12.2021 31.12.2020 31.12.2022 Supplementary unit p/st p/st p/st p/st p/st —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
2 0 % 0
)
2
)
2
)
2
)
2 Air membrane compressor with: — a flow of 4,5 or more, but not more than 7 l/min, l/min and W, 8,1 than more not of input — power — bar) exceeding 400 hPa (0,4 not capacity gauge pressure a of a kind used in the production of motor vehicle seats vehicles ( ( motor vehicles automobiles ( with: elements, and ceramic mm), 1 (+/– mm 166 of length — a mm), 1 (+/– mm 70 of diameter — a — cm3 or more, of 280 capacity an internal — g or more, and of 17 absorption rate a water 0,9 mg/dm than more not of impurities of amount by — permissible expressed purity an internal of a kind used in car air-conditioning systems Description Aluminium pistons, for incorporation into compressors of air conditioning machines of motor of machines of conditioning ( machines air vehicles conditioning of motor air compressors of of polyamide into machines compressors containing incorporation conditioning into block, for air incorporation connection pistons, of for a Aluminium compressors system, with for Pressure-regulating dryer part, receiver Drive removable arc-welded conditioning of air machines for Evaporator made of aluminium for use in the manufacture Aluminium 20 20 20 30 40 20 30 TARIC CN code ex 8414 90 00 ex 8414 90 00 ex 8414 90 00 ex 8415 90 00 ex 8415 90 00 *ex 8414 80 22 *ex 8414 80
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 239
Date foreseen for mandatory review
31.12.2020 31.12.2020 31.12.2019 31.12.2019 31.12.2019 31.12.2018 Supplementary unit p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
air-conditioning systems mm, — but not than 292 mm or more more a length of 143 mm, — mm or more but not than 99 of 31 a diameter — mm, and mm and a thickness of not a spangle more than 0,06 length of not more than 0,2 mm 0,06 than more not of diameter particle solid — a of a kind used in car air-conditioning systems equipment of these elements: and sanitization sterilization incorporating modules for system — ultrafiltration system filtration — carbon system softener — water for use in a biopharmaceutical laboratory artificial embedded in a block of walls, permeable with material plastic of artificial hollow fibres other the at material plastic artificial block of passing through a one end and at material plastic cylinder a housed not in or end, whether Description Flame-soldered aluminium block with extruded, bent connector lines, of a kind used in car in used kind a of lines, with: connector elements bent ceramic extruded, and equipment with polyamide refrigeration block with in aluminium dryer used Flame-soldered receiver kind removable the arc-welded of Aluminium tubes copper concentric two of composed Evaporator composed of aluminium fins and a copper coil of the kind used in refrigeration Condenser system comprising one pre-treatment or more Water of the following elements, whether or not by osmosis, of water consisting reverse of a bundle of equipment, the purification of Parts for 40 55 50 60 20 91 TARIC
CN code ex 8415 90 00 ex 8418 99 10 ex 8418 99 10 ex 8421 21 00 ex 8421 99 90 *ex 8415 90 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 240
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2022 31.12.2018 31.12.2020 31.12.2021 Supplementary unit p/st p/st — p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2
)
)
2
2
consisting of a bundle hollow enclosed of permeable within a fibres container, whether or not 700 length of of an 300 mm and overall perforated, a diameter mm or more but not more than 3 mm of not more than 500 Machines and apparatus, other than injection moulding machines, of ink-jet for the manufacture ( printer cartridges ( 87 Chapter goods of of manufacture the in use for mounting clamps 600 ml, equipped with a nozzle, of a kind spraying used appliances for as a part of mechanical liquids ( 8427 heading in vehicles of manufacture the in use for mounting arms mast and hubs, brakes square wave design of 9 use 2,54 cm of core length vehicles for fins per in the manufacture ( of heading 8427 motor, AC single-phase — a gearing, epicyclic — an blade cutter — a not containing: or and whether capacitor, — a — with a threaded bolt a part fitted ( for use in the manufacture of garden shredders Description Mechanical passenger car headlights washer with telescopic hose, high pressure nozzles and nozzles pressure high hose, wheel telescopic core shafts, with open drive washer an wheel, headlights gas mixtures, of gases from and Components or purification for the separation of separators crown car structure gears, passenger support reduction Mechanical steel differential, integral containing with than with a content of 50 but not more ml or more poly(ethylene Containers of terephthalate), assembly radiator, axle tank Drive plastic core, Aluminium containing: Part 10 30 93 20 30 30 40 10 TARIC
CN code ex 8422 30 00 ex 8421 99 90 ex 8479 89 97 ex 8424 89 70 ex 8424 90 80 ex 8431 20 00 ex 8436 99 00 *ex 8431 20 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 241
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2020 31.12.2021 Supplementary unit p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
2
)
2
hold vessel of a length of 3 000 mm or more and an external diameter of 550 mm or more of 550 and diameter mm or more an external 000 a length of 3 of with: circuits, connecting Mechanical switches for electrical — a voltage of 14,4 V or more but not than 42 V, — of 10 an amperage A or more but not than 42 A, ( for use in the manufacture of machines falling within heading 8467 with Glass Filament Melter basket/bushing heater assembly: heated, — electrically opening — with — of platinum/rhodium alloy of tips (holes) with a multiplicity glass molten condition and batches glass melt to — used fibres continuous into drawing — for Machinery, being components of a ion production of lithium batteries line for the manufacture ( motor for passenger vehicles, for electric the construction of such a production line and steel, stainless austenitic of surfaces interior — having litres, 000 15 to up capacity process a — with — system and/or a dedicated paired media whether or not combined with a ‘clean-in-process’ Description shells, produced Suction-roll by casting, not tubes, centrifugal drilled, in the form of alloy-steel culture membranes of heading modification of plastic Machines for casting or surface 3921 cell biopharmaceutical for Bioreactor 10 10 50 80 35 10 80 10 10 60 TARIC CN code ex 8467 99 00 ex 8475 29 00 ex 8479 89 97 ex 8479 90 20 ex 8439 99 00 ex 8536 50 11 ex 8514 10 80 ex 8477 80 99 ex 8479 90 70 ex 8479 89 97
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 242
Date foreseen for mandatory review
31.12.2019 31.12.2019 31.12.2020 31.12.2021 31.12.2019 31.12.2018 Supplementary unit p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
pressure system, systems, 000 amps) Current (16 capability and fix them in position with a two part cure epoxy ( batteries AA and/or AAA alkaline of the manufacture for closing cap) rating, pressure tonne 000 16 a — with 1mm), (± Bolster diameter 100mm 1 a — with 1mm), and (± cylinder accumulator main 400mm hydraulic pressure 1 a high — with pump multiple frame, link floating and Fixed a — with piping and electrical for and connections arrangement manipulator double arm a with — and tonnes), 10 (± tonnes 310 weight total a — with Alternating Frequency Low using centigrade degrees 500 1 at atmospheres 000 30 — creating ( vehicles motor engines of of manufacture the use in hoses for outlet hoses and three two inlet kPa, 800 than more not of pressure opening — an mm 37 than more not diameter external — an flow in fuel injection engines Description High Pressure Hard Materials Compression Press (‘Link Press’): Press’): (‘Link Press Compression Materials assembly in five axis alignment lenses into a camera align and attach Machine to accurately Hard Pressure the production of a sub Machinery for assembled component (anode conductor and the negative High with: valves (non-return) sensor, with at least combustion piston engines temperature Fuel hose internal for with a fuel check Steel control valve, consisting Air of a stepping motor and of idle air the regulation a valve pintle, for 70 80 85 87 91 10 TARIC CN code ex 8479 89 97 ex 8479 89 97 ex 8479 89 97 ex 8479 90 70 ex 8481 30 91 ex 8481 80 59
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 243
Date foreseen for mandatory review
31.12.2021 31.12.2022 31.12.2018 31.12.2019 31.12.2019 Supplementary unit p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
2
)
2 than 14 MPa, than 14 units ( — a solenoid pilot valve connections copper and slider valve including body valve brass — a MPa with a working pressure up to 4,5 Ball and bearings: cylindrical mm, — mm or more but not than 140 of 28 with an outside diameter — of more than 150 stress with an operational thermal °C at a working of not pressure more for the manufacture of machinery for the protection and control of nuclear reactors in nuclear ( power plants Ball bearings: — mm or more, of 3 diameter with an internal mm, 100 than more not of diameter external an — with mm, 40 than more not of width a — with Description Pressure regulating valve for incorporation into compressors of motor vehicle air condition air vehicle motor of compressors into incorporation bar of: for 875 valve consisting regulating of refrigerants, Pressure pressure for a valve withstand reversing can Four-way that device valve Solenoid 10 10 40 10 30 20 60 20 TARIC
CN code ex 8482 10 10 ex 8482 10 90 ex 8481 80 59 ex 8481 80 79 ex 8482 50 00 *ex 8482 10 *ex 8482 10 90 *ex 8481 80 69 ______
M7 M8 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 244
Date foreseen for mandatory review
31.12.2022 31.12.2021 31.12.2018 Supplementary unit p/st p/st p/st
duty 0 % 0 % 0 % Rate of autonomous
)
2
Bearing housing of a kind used in turbochargers: 1561, EN DIN standard with complying iron cast grey precision-cast — of chambers, oil — with bearings, — without mm, — mm or more, but not than 250 more of 50 with a diameter — mm, mm or more, but not more than 150 with a height of 40 connectors and chambers water with not or — whether 000 Nm, — torque of 50 but than 9 Nm or more not more a rated — of 1:50 or more but not than 1:475, standard ratios — minute, than one arc not more motion of lost % 80 than more of efficiency — an of a kind used in robot arms — torque of 25 Nm or more, but not more than 70 a rated Nm, — of 1:12,7 or more, ratios but not more than 1:64,3 standard gear — whether or not equipped with a duster, a with equipped not or — whether power steering systems of use motor, electric of belt drive steering in the for manufacture ( gears for steering gears or assembly ball screw systems or steering Description with: with: tools type power gear hand-held cycloid driving of in set used Gear kind a of gearing, Epicyclic 20 50 50 60 TARIC CN code ex 8483 40 29 ex 8483 40 29 *ex 8483 30 32 *ex 8483 30 38
M6 M8 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 245
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2022 31.12.2022 Supplementary unit p/st p/st — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2 )
2
)
2
)
2 3 200 rpm, unloaded, lawnmowers with a seat of subheading 8433 11 51 ( ( 51 11 lawnmowers with a seat of subheading 8433 of self-propelled manufacture the mm, mm × 108 — mm × 115 of not more than 154 shafts) (without measurements kg, 3,3 than more not of weight — a 700 or more, but than rpm not more — speed of 2 a maximum of the input rotation shaft — of not than 10,4 a torque of the output more shaft Nm, — 800 rpm input speed, and 2 speed of not more than 930 of the output a rotation rpm at shaft — 40 range of – 5 + °C an operating temperature °C or more, but not than more for use in the manufacture of hand-operated lawn mowers of heading 8433 11 90 ( — a reduction of 20,63:1 or more, but not than 22,68:1, more 000 rpm when when 800 loaded than 3 or more and rpm of not more — 1 an input speed of — 156 than Nm, more not but more, 142 Nm or continuous of a output torque — output torque of 264 an intermittent Nm or more, but than not more 291 Nm, and mm, — mm or more, but not more than 19,06 of 19,02 diameter an axle shaft — fan impeller or with a pulley integrated whether or not equipped with a fan impeller 51, 11 for use in lawn the production mowers with a seat of subheading of self-propelled 8433 ( 90, whose lawn mower function is that of a main 91 of subheading and 8701 tractors Description Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled of manufacture the in use for axle, wheel with differential a having box, Gear speed changer, having Hydrostatic a hydro with wheel axle, for use in pump and a differential with: transmission Hydrostatic with transmission Hydrostatic 20 20 20 30 TARIC CN code ex 8483 40 51 ex 8483 40 59 *ex 8483 40 90 *ex 8483 40 90
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 246
Date foreseen for mandatory review
31.12.2020 31.12.2021 31.12.2020 31.12.2018 Supplementary unit p/st — — p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2 — not more than 3 gears, 3 than more — not and system deceleration automatic — an system, reversal power — a ( for use in the manufacture of goods of heading 8427 ( condition motor vehicle air units 0,3), (+/– mm 24 of axle without length — a 0,3) (+/– mm 49,3 of diameter — a — voltage of 220 a rated V AC or more but not than 240 more V AC, Hz, — Hz or more but not than 60 frequency of 50 a rated W, 4 than more not of power input — an — speed of 4rpm or more but not than 4,8 a rotation rpm, kgf/cm 10 than less not of torque output — an %) rpm, a supply voltage of 1,5 V or 3 V 420 15 (± rpm or 5 %) 260 15 (± 2 Description Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of manufacture the in use for with: compressors of gearbox, speed rotary Transmission rated into a incorporation mm, for 25,4 seal than shaft more Mechanical not of diameter mechanism with Synchronous flow control a dishwasher with water motor for external an with brushless, motor, DC 80 10 20 54 TARIC CN code ex 8483 40 90 ex 8484 20 00 ex 8501 10 ex 8501 10 99 ______
M7 M6 M7 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 247
Date foreseen for mandatory review
31.12.2021 31.12.2020 31.12.2021 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
— with a speed rotation of not more than 7 000 rpm (without load), (without rpm 000 7 than more not of rotation speed a — with V), 4 (± V 12 of voltage nominal a — with A), 3,09 (at W 13,78 of power maximum a — with °C, 160 to °C 40 – from range temperature specified a — with connection, gear a — with interface, attachment mechanical a — with connections, electrical 2 — with Nm 100 of torque maximum a — with loaded; not when rpm 500 6 than more not of speed rotor a — with 0,1); (+/– V 12,0 of voltage rated a — with — 165 range of – 40 temperature + of a specified °C; °C or more, but not more than pinion; connecting a without or — with connector engine an without or — with load), (without rpm 500 6 than more not of rotation speed a — with V), 4 (± V 12 of voltage nominal a — with W, 20 than below power maximal a — with °C, 160 to °C 40 – from range temperature specified a — with drive, gear worm a — with interface, attachment mechanical a — with connections, electrical 2 — with Nm 75 of torque maximum a — with Description DC Motor: DC motor: DC Motor: DC 56 57 58
TARIC CN code ex 8501 10 99 ex 8501 10 99 ex 8501 10 99
M7 M6 M7 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 248
Date foreseen for mandatory review
31.12.2022 31.12.2020 31.12.2018 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
)
2
than 6 500 rpm when not loaded than 6 — with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more 000 rpm than 5 but not more — more 500 rpm or 3 speed of rotor with a — with a power supply voltage of 100 V or more but not than 240 V ( for use in the fryers manufacture of electric motor, DC — a mechanism, gear integrated — an — of 200 a (pulling)force N or more at a minimum of 140 °C ambient temperature, elevated — of 250 stroke, force N or more in each position a (pulling) of its mm, — mm or more but not than 25 stroke of 15 an effective interface diagnostics on-board an without or — with — an angle of step 7,5° (± 0,5°) winding, two-phase — a — voltage of 9 V or more, but not more than 16,0 a rated V °C 105 + to °C 40 – least at covering range temperature specified a — of pinion connecting without or — with — connector with or without motor drive Description DC motor: DC with: actuator, turbocharger Electric with motor, stepping DC 60 65 70 TARIC
CN code ex 8501 10 99 ex 8501 10 99 *ex 8501 10 99 ______
M8 M7 M6 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 249
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2018 31.12.2018 31.12.2019 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
or more, a holding torque of 0,5 mNm or
o
),
o (± 0,5
o — a multiple-phase winding multiple-phase — a mm, — mm or more but not than 35 of 28 diameter an external rpm, 000 12 than more not of speed rated — a — a power supply voltage of 8 but V or more not more than 27 V 70 °C + to 20 °C – least at covering range temperature specified a of worm, a with equipped — an angle of step 7,5 %) rpm, a 800 supply voltage (± 15 of 2 V or 8 V %) rpm or 6 (± 15 — a pull-out torque at 25 °C of 25 mNm or more, or mNm 25 of °C 25 at torque pull-out — a 500 pps or more, — of 1 a pull-out pulse rate and winding, two-phase — a — voltage of 10,5 more, but not more than 16,0 V rated a or V more, a coupling bracket the exterior dimensions of which do not exceed 22 mm × 68 mm, a two phase winding and an output of not more than 5 W Description Permanently excited DC motor with motor DC excited Permanently with: motor, winding, or not with a three-phase whether rotor DC motor with brushes and an internal stepping DC DC stepping motor, with an angle of step 18 500 of not DC more than 29 motor, diameter brushless, speed with an external mm, of 1 a rated 75 79 80 81 82 TARIC CN code ex 8501 10 99 ex 8501 10 99 ex 8501 10 99 ex 8501 10 99 ex 8501 10 99
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 250
Date foreseen for mandatory review
31.12.2022 31.12.2022 31.12.2021 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
) )
2
2 — a rated output of 1,2 kW, 1,2 of output rated — a and V, 230 of voltage supply — a brake, — engine — with output housing which assembled to a reduction gear shaft, is contained in a plastic ( drive of lawnmower blades use as electric for mm, — mm or more, but than not more 100 of 80 diameter an external V, 12 of voltage supply — a — 20 an output at °C of 300 W or more, but not more than 750 W, — torque 20 a °C of 2,00 more, but not more than 7,00 Nm or Nm, — 100 rpm, speed at 20 a rated °C of 600 rpm or more, but not more than 3 — type, effect type or Hall angle position sensor of resolver with or without the rotor of the kind used in power steering systems for cars W 120 than more of an output of Nm), 1,0 Nm (± 2,23 of torque a nominal mm, 115 than more 12 V of voltage a supply at rpm) 350 (± rpm 550 1 with calculated W, 520 than more not but power electric an with use for effect, Hall the using sensors with circuit electronic with equipped ( motor) steering (power module control steering Description Universal AC/DC motor with motor AC/DC Universal with: brushless, motors, DC not but more, or 85 mm of diameter an external winding, three-phase a with brushless, motor, DC 30 25 30 TARIC
CN code ex 8501 31 00 *ex 8501 20 00 *ex 8501 31 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 251
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2018 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
— a multiple-phase winding, multiple-phase — a mm, — mm or more but not than 80 of 30 diameter an external rpm, 000 15 than more not of speed rated — a — an output of 45 W or more but not than 300 W and — a supply voltage of 9 V or more but not than 25 V mm, — mm or more, but than not more 110 of 90 diameter an external rpm, 680 3 than more not of speed rated — a 300 80 rpm and at — °C, an output of 600 than 740 W or more but not more 2 W at V, 12 of voltage supply — a Nm, 5,67 than more not of torque — a sensor, position rotor — a and relay, star-point electronic — an module control steering power electric an with use — for mm, — mm or more, but not than 45 more of 27,5 diameter an external 200 rpm, 000 rpm or more, but not than 23 more — speed of 11 a rated — supply a rated voltage of 3,6 V or more, but not than 230 more V, W, 529 than more not of power output — an Description Permanently excited DC motor with motor DC excited Permanently with: brushless, motors, DC with DC motor with commutator, 40 45 55 TARIC
CN code ex 8501 31 00 ex 8501 31 00 ex 8501 31 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 252
Date foreseen for mandatory review
31.12.2021 31.12.2020 Supplementary unit — —
duty 0 % 0 % Rate of autonomous
)
2
length of teeth 25 mm (± 1 mm), and 1 mm (± 25 teeth length of — electronic control operating by Hall Effect position sensors, position Effect Hall by operating control — electronic V, 16 than more not but more or 9V input — voltage mm, — but not than 80 mm or more more motor 70 of the diameter external — output motor power 350 W or more but not than 550 W, — maximum output torque 50 Nm or more but not more than 52 Nm, — speed 280 maximum output rotation rpm or more but not than 300 rpm, and minimum 17 teeth mm), 1 (± mm 20 diameter outer outputs of spline male — coaxial mm) 1 (± mm 119 splines of root between distance — with ( task vehicles or utility of all-terrain use in the manufacture for motor with: Automotive-ready, brushless current and permanently excited direct rpm, 100 4 than more not of speed specified — a — 12 V), kW (at minimum output of 400 a W, but not more than 1,3 mm, — more, but not more than 150 mm or of 90 diameter flange a — a maximum length of 200 mm, from the beginning measured to ending, the outer of the shaft — mm, from the flange to outer ending, a housing measured length of not more than 160 — of not more than 3,1 A, load current a free — or more, % of 54 a maximum efficiency for driving hand-held power tools Description Brushless DC motor assembly comprised of a motor and transmission, with: transmission, and motor a of comprised assembly motor DC Brushless 78 75 75 TARIC CN code *ex 8501 31 00 *ex 8501 31 00 *ex 8501 32 00
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 253
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2021 31.12.2021 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
minimum 2 and maximum 6 bore holes) aluminium diecast housing whether or not with not housing or whether diecast aluminium holes) 2 and maximum 6 bore minimum a sealing compound (groove with an O-ring and grease), Fuel cell module containing at least polymer electrolyte membrane fuel cells whether or not Fuel cell module membrane fuel in a containing polymer electrolyte at least housing cooling of motor vehicle with an use in system, integrated the manufacture for ( propulsion systems Traction motor, with: — a torque output of 200 Nm or more but not than 300 Nm — kW kW or more but not than 100 a power output of 50 rpm 500 12 than more not of speed rated — a ( for use in the vehicles manufacture of electric kW, with: with an output motor vehicles, of not more than 315 for drive Electric — an AC or DC motor whether or not with transmission, electronics — power AC synchronous a maximum and speed of not more than brake for servo motor with resolver 6 000 rpm, with: — kW, an output of 340 W or more but not than 7,4 more — mm, and mm × 180 of dimensions a flange of not than 180 more — mm of not more than 271 end of resolver flange to extreme a length from — a maximum of two-piece (basic housing including electric components and flange with — design windings with single T-tooth and single coil in 12/8 a stator topology, and magnets — surface Description
50 60 30 50 30 55 15 10 50
TARIC CN code ex 8501 32 00 ex 8501 32 00 ex 8501 33 00 ex 8501 40 80 ex 8501 51 00 ex 8501 33 00 ex 8501 33 00 ex 8501 53 50 ex 8501 52 20
M6 M8 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 254
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2021 31.12.2019 31.12.2019 31.12.2020 31.12.2022 Supplementary unit — p/st p/st p/st p/st p/st —
duty 0 % 0 % 0 % Rate of autonomous 0 % 0 % 0 0 % 0 m m μ μ 0 % 0
— a Hydrogen generator (desulphurizer, reformer and cleaner) and reformer (desulphurizer, generator Hydrogen — a and stack cell fuel PEM — a Inverter — an in a heating appliance use as a part for cells, fuel acid phosphoric least at of — consisting treatment, gas and management water integrated with housing a — in supply energy stationary permanent, — for the innerside provided in a Rotor, at with one or two rings whether or not incorporated magnetic steel ring Description module, Fuel cell AC with an output generator of 7.5 kVA or less, consisting of: system cell Fuel steering power electrical of motors mm than 16 of not more motor, having diameter an external an electric of Stamped collector brushless for of 50 with a roundness power steering tolerance brushless motor of electrical for Stator resolver power steering with a roundness of 50 tolerance brushless motor of electrical Rotor for Transmitter 31 32 35 30 31 33 34 35 TARIC
CN code ex 8503 00 91 ex 8501 61 20 ex 8503 00 99 ex 8503 00 99 ex 8503 00 99 ex 8503 00 99 ex 8503 00 99 *ex 8501 62 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 255
Date foreseen for mandatory review
31.12.2022 31.12.2018 31.12.2019 31.12.2018 Supplementary unit p/st p/st — p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
manufacture of fuel cells in heading 8501 0,5) (± mm 206,6 of diameter internal — an and 0,2) (± mm 265,0 of diameter external — an 0,3) (± mm 41,00 of width — a of a kind used of washing in or dryer equipped the manufacture machine, washer-dryer with direct drive drums mm) mm (± 0,25 more than 2,5 ( manufacture of static converters Description Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not of thickness a the with in steel use galvanized for of with: kVA system motor, 1 steering than 150 not more width of kind with a cm, of a used or sheets, brushless for in rolls membrane, Fuel cell than drive for more belt Stator not electronic of for capacity cover handling Engine power a having transformers, Switching 40 50 60 30 TARIC
CN code ex 8503 00 99 ex 8503 00 99 ex 8504 31 80 *ex 8503 00 99 ______
M8 M6 M8 M6 M8 M6 ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 256
Date foreseen for mandatory review
31.12.2022 31.12.2022 31.12.2021 Supplementary unit — — p/st
duty 0 % 0 % 0 % Rate of autonomous
)
2
)
2 mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or operation dimmed in V) 4 V (± 30 of voltage input an mode, with mode, in dimmed operation or %) voltage of 160 15 V (± mode in dimmed operation %) 20 voltage of 60 V (± 120 V versions Hz for and 45-70 — of 1 kVA with a capacity or less cables, or plugs — without ( for internal use in the manufacture of set top boxes and TVs ( sources for lighting industry components: connectors output two — with parallel in useable and available are which connectors input two — with mode operation dimmed and bright between switch to — able — with an input voltage of 40 %) or 42 %) in % bright operation V V -15 % -15 (+ 25 (+ 25 %) in bright operation mode, with an input — % -15 with an input voltage of 230 V (+ 20 in bright operation mode, %) with an input % -35 with an input voltage of 120 — V (15 — % of its nominal value within 20 ms reaching 80 with an input current 42 — V and Hz for 230 V, Hz or more, but not more than 65 with an input frequency of 45 Description Transformers for use in the manufacture of electronic drivers, control devices and LED light LED and devices control drivers, electronic of transformers: manufacture Electrical the in use for Transformers Printed circuit board equipped with a bridge circuit and rectifier other active and passive 40 50 40 TARIC
CN code ex 8504 31 80 *ex 8504 31 80 *ex 8504 40 82 ______
M8 M7 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 257
Date foreseen for mandatory review
31.12.2022 31.12.2019 31.12.2021 Supplementary unit p/st — p/st
duty 0 % 0 % 0 % Rate of autonomous
)
2
)
2 not more than 420 V, mm) (± 1 — Hz, with an input AC voltage of 100-240 frequency of 50-60 V at — but not more than 12 V and 396 but with two output DC voltages of 9 V or more V or more and connectors, without cables — output — mm mm) × 38 with mm (± 0,5 in enclosure dimensions mm) × 60 a plastic 110 mm (± 0,5 ( for use in the manufacture of products using IPL Pulse (Intensive Light) vehicles ( 3-phase AV voltage used to power up polyphase into 2 or input voltage AC variable-speed electrical drives, in a casing fitted with one or more integrated circuits, IGBTs, diodes and A 4 of current rated a 650 VAC, and 600 VAC or of voltage output having an thermistors, more, but not more than 30 A or — with an maximum inrush current overshoot of not more than 250 % of the input current — with an overshoot maximum of not inrush current more than 250 — overshoot than 100 of not more with a period of the inrush current ms — % of the input current undershoot than 50 with an input current of not less — undershoot of not more than 20 with a period of the inrush current ms current output presettable a — with — value within 50 ms % of its nominal pre-set reaching 90 with an output current voltage input the of removal after ms 30 within zero reaching current output an — with — function) of no-load or too-high status in case load (end-of-life with an defined failure Description Semiconductor power module (so called Smart Power Module) for converting single-phase AC rectifier: single-phase Electric converting for Module) Power Smart called (so module of electric use in the manufacture for motor control use in traction for DC to AC inverter power Semiconductor 50 30 15 TARIC CN code ex 8504 40 88 ex 8504 40 90 *ex 8504 40 82
M6 M8 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 258
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2018 31.12.2018 Supplementary unit p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2 connections, connection elements which allow the mounting to board a printed circuit by soldering or any other technology, processing or other wiring connections further requiring Gate (Insulated IGBT or Transistor) Field-Effect Oxide Semiconductor MOSFET (Metal and Bi-polar Transistors)) internal drives, and more, but not than more 800 V DC — without housing or housing — without with housing — with connection pins, connection connectors, unprotected line studs, screw ovens of microwave of subheading contained in a housing, use in the manufacture for 8516 50 00 ( transistors, — power circuits, — integrated — whether or not containing diodes and with or without thermistors, V, 600 than more not of voltage operating — an — not more than three electrical outputs each containing two power switches (whether A 15,7 than more not of rating current square) mean (root rms — a — one or six 3-phase motor outputs with maximum 3 × 32 A, — a main power input of 220 V AC or more, but not more than 480 V AC, or 280 V DC or DC, V 24 of input power logic — a Description Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), transistors bipolar insulated-gate with switch power current to Direct direct current converter a comprising converter comprising: Static modules power Semiconductor with: robot industrial for unit Drive 25 30 40 50 TARIC
CN code ex 8504 40 90 ex 8504 40 90 ex 8504 40 90 ex 8504 40 90 ______
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 259
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2019 Supplementary unit p/st p/st p/st
duty 0 % 0 % 0 % Rate of autonomous
)
2
rms current of more than 15,7 rms current A, — power transistors, — power circuits, — integrated — whether or not containing diodes and with or without thermistors, configuration, circuit — a — either containing a direct drive stage with an operating voltage of more than 600 V, — stage with an operating voltage of not more than 600 drive or containing V and a a direct — modules or including correction one or more power factor with W 100 than more not of power rated — a — an input voltage of 80 V or more, but not than 305 more V Hz — Hz or more, but not more than 440 input frequency of 47 an certified output(s) voltage constant more or — one — 85 range of – 40 + an operating temperature °C, °C or more, but than not more circuit printed a to mounting for — pins converter DC to DC — a — kW of not not than 7 of a capacity more a charger functions — switching ( for use in the vehicles manufacture of electric — an EtherCat communication interface, communication EtherCat — an mm 179 430 × 335 × — than more not but more, or mm 120 140 × 150 × of dimension and a Description Transfer moulded semiconductor power module comprising: module power semiconductor moulded Transfer Module for converting current into and alternating direct current current current into direct direct containing: converter Power 60 70 80 TARIC CN code ex 8504 40 90 ex 8504 40 90 ex 8504 40 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 260
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2022 31.12.2021 31.12.2021 Supplementary unit p/st p/st — p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
(± 20 %), 20 (± μΗ
)
2
winding/coil 4,7 of inductance — an Ohms, 0,1 than more not of resistance DC — a — of 100 MOhms an insulation resistance or more at 500 V (DC) ( for use in the manufacture of LCD and LED module power boards W, 6 than more not of consumption power — a and ohms, M 100 than more of resistance insulation — an mm — mm or more, but not more than 11,8 hole of 11,4 an insert use for in the control gear, manufacture of electronic control units and LED light sources for the ( lighting industry — power of more than 10 W but not 15 W, rated a more, or Ohms M 100 of resistance insulation — an °C, 20 at %) 10 (± Ohm 34,8 than more not of resistance DC — a A, 1,22 than more not of current rated — a V 25 than more not of voltage rated — a Description Coil choke with: choke Inductors with one or more windings, having an inductance of not than more 62 mH per Coil with coil Solenoid with: windings, than 350 per winding with one or more of not more with an inductance mH, Inductors coil Solenoid 20 40 50 60 70 TARIC
CN code ex 8504 50 95 ex 8504 50 95 ex 8504 50 95 ex 8504 50 95 *ex 8504 50 95 ______
M8 M6 M7 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 261
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2019 31.12.2018 31.12.2021 Supplementary unit p/st p/st p/st p/st —
duty 0 % 0 % Rate of autonomous
0 % 0 0 % 0
0 % 0 electric and electronic components, reverse direction) — being a power electronic circuit mounted on the PCB, equipped with SGCT thyristor and thyristor SGCT with equipped PCB, the on mounted circuit electronic power a — being 500 — V — in both directions (conducting and the having to block an ability the voltage - 6 of a kind and used in inverters) medium voltagestatic converters (rectifiers corners intended to become magnetization, containing permanent magnets after neodymium, iron and boron, with dimensions: mm, — mm or more but not than 105 a length of 9 mm, and — mm or more but not than 105 a width of 5 mm — mm or more but not than 55 a height of 2 Description Reactor cores for use in a High Voltage Direct Current thyristor converter thyristor Current Direct yokes Voltage driver: deflection High gate for a integrated than in with other use Thyristor) cores, for Gate-Commutated Ferrite cores (Symmetric Reactor SGCT Thyristor Permanent magnet having a remanence of 455 mT (± 15 mT) whether or not shaped square or rectangle, or with rounded of a in triangle, the form Articles 10 20 20 31 47 TARIC
CN code ex 8504 90 11 ex 8504 90 11 ex 8504 90 99 ex 8505 11 00 ex 8505 11 00 ______
M7 M8 M7 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 262
Date foreseen for mandatory review
31.12.2022 31.12.2020 31.12.2022 Supplementary unit p/st p/st —
duty 0 % 0 % 0 % Rate of autonomous
with: neodymium, iron and boron, with dimensions: with boron, and neodymium, iron mm, — mm or more but not than 52 more a length of 15 mm, — mm or more but not than 42 a width of 5 of a kind to be used servomotors for industrial automation in the manufacture of electric Flat bars of an alloy of samarium and cobalt with mm); 0,05 (± mm 30,4 of length — a — a width of 12,5 mm (± 0,15 mm); — a thickness of 6,9 mm (± 0,05 mm), or composed in the shape of of ferrites a quarter sleeves mm); 0,75 (± mm 46 of length — a mm), 0,2 (± mm 29,7 of width — a and of a kind starters used magnetisation, in car magnets after intended to become permanent cars devices extending the drive range of electric mm, 45 than more not of diameter — a mm, 45 than more not of height — a of a kind used in the magnetisation manufacture of permanent magnets after Description Bars specifically shaped, intended to become permanent magnets after magnetisation, containing magnetisation, after magnets permanent become to intended shaped, specifically with Bars boron, and iron neodymium, of alloy an from made collars or bushings tubes, Rings, 55 40 50 60 TARIC
CN code ex 8505 11 00 ex 8505 19 90 *ex 8505 11 00 *ex 8505 11 00 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 263
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2018 Supplementary unit — p/st p/st
duty 0 % 0 % 0 % Rate of autonomous
a rectangle, whether or not section having rounded, a rectangle, or a trapezoidal with a rectangular mm, 140 than more not of length — a and mm, 90 than more not of width — a mm, 55 than more not of thickness — a or in the shape of curved type) having rectangle (tile mm, 75 than more not of length — a mm, 40 than more not of width — a and mm, 7 than more not of thickness — a mm — mm but not more than 241 more than 86 of radius of curvature a or in the shape of a disc with of not a diameter mm, more than 90 whether or not containing a hole in the centre magnetisation is intended to become a permanent magnet centre, the in hole a containing not or — whether mm, 90 than more not of diameter a — with of a kind used in car loudspeakers boron, and iron neodymium, least at of — consisting — mm, mm or more but not than 10,5 with a width of 9,1 mm, — mm or more but not than 30,1 with a length of 20 of a kind used on rotors for the manufacture of fuel pumps Description magnets consisting of an alloy neodymium, Permanent and iron shape boron, in the of either magnetization, after magnet permanent become to consisting of an alloy neodymium, Disc iron and boron, covered with nickel or zinc, that after intended sleeve quarter A 65 70 75 TARIC CN code ex 8505 11 00 ex 8505 11 00 ex 8505 11 00
M7 M6 M7 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 264
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2018 31.12.2018 31.12.2022 Supplementary unit — p/st p/st p/st —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2 containing a hole in the centre intended to become permanent magnets after magnetisation with a magnetisation with magnets after intended containing a hole to become permanent in the centre remanence between245 mT and 470 mT after magnetisation edges bevelled with not or — whether mm), 0,15 mm (± — mm or more but not than 32 of a length of 27 mm), mm/– 0,09 mm (+ 0,05 — mm or more but not than 9,5 of a width of 8,5 mm), and mm (+ 0/– 0,2 — but not than 5,8 mm or more more of a thickness 5,5 g — g or more but not than 8,3 of a weight 6,1 ( of motor vehicles plunger — a 0,1), (+/– mm 12,9 of diameter — a 0,1), (+/– mm 20,5 of plunger without height — a and connector, with cable electric — an housing metal in a cylindrical ( heading within of products falling 8517 use in the manufacture A, for Description than 120 of not more diameter a disc with in the shape mm, of ferrite of agglomerated Articles prism to become permanent magnet in the shape of a rectangular of agglomerated ferrite Article with: valve, electromagnetic an for conditioning of compressors air machines clutch, for use in the manufacture Electromagnetic Coil Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 30 50 30 30 91 TARIC CN code ex 8505 19 90 ex 8505 20 00 ex 8505 90 29 ex 8505 90 29 *ex 8505 19 90
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 265
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 Supplementary unit — — — — — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2 flooded battery during the first 5 seconds of charge, seconds of 5 first during the flooded battery — a diameter of 14,0 mm or more but not more than 26,0 mm, — but mm or more not more than 26,0 of 14,0 a diameter mm, — mm or more but not than 51 a length of 2,2 — a voltage of 1,5 V or more, but than not more 3,6 V, — of 0,15 a capacity Ah or more, but not than 5,00 more Ah or remote meters devices, electronic and medical of telemetry use in the manufacture for controls ( 45 mm and a voltage of not more than 2,8 V (battery-buffered socket), with not more than 32 connections and incorporating a control circuit of not less than 1,05 mm and a capacity Ah mm × 15 mm × 45 than 28 Ah, 32 more not of capacity nominal — a mm, 205 than more not of length — a and mm 130 than more not of width — a mm 190 than more not of height — a ( of heading 8711 of articles use in the manufacture for — % or more of the level an equivalent conventional capacity of 200 a charge acceptance Description Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits integrated for socket a with: in cells embedded primary batteries cylindrical lithium Lithium 2 than more not of consisting mm × mm × 23 battery the dimensions Lithium iodine single cell of which do not exceed 9 with Unit modules, or accumulators of dimensions not more battery vanadium oxide single cell lithium-silver or Lithium-iodine Lead-acid with: battery, starter acid Lead 10 10 20 30 30 80 TARIC CN code ex 8506 50 10 ex 8506 50 90 ex 8506 50 90 ex 8506 50 90 ex 8507 10 20 ex 8507 10 20
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 266
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2
)
2
)
2 diameter of 14,5 mm (± 1mm), having a nominal capacity of 1 000 mAh more, for use in the or of 14,5 1mm), having of 1 diameter mm (± a nominal capacity ( manufacture of rechargeable batteries or module, Rectangular accumulator with a length of not more than 69 mm, a width of not more rechargeable of manufacture the in use for 12 mm, than more not of thickness a and 36 mm than batteries ( ( batteries the manufacture of rechargeable — of 8,8 a nominal capacity Ah or more, but not more than 18 Ah, — a nominal voltage of 36 V or more, but not more than 48 V, — a power of 300 Wh or more, but not than 648 more Wh, ( for use in the bicycles manufacture of electric with: V, 12 of voltage rated — a mm, — but not than 355 mm or more more a length of 350 — mm, but than mm or more not more 180 a width of 170 mm, — but not than 195 mm or more more a height of 180 — kg kg or more but not than 15 weighing 10 — of 60 a nominal charge Ah or more, but not more than 80 Ah — a liquid electrolyte, liquid — a for use in the manufacture of passenger cars and light commercial vehicles employing high regenerative alternator controls or start/stop systems with ( high regenerative alternator controls Description or module, accumulator nickel-cadmium with a length of 65,3 Cylindrical mm 1,5 (± mm) and a cells, with: secondary modules lithium-ion or rechargeable lithium-ion-accumulators four than 14,5 mm, for of not more or module, of a diameter nickel-hydride accumulator Cylindrical Cylindrical of consisting accumulator, starter Lithium-ion 20 20 30 30 15 17 TARIC CN code ex 8507 50 00 ex 8507 30 20 ex 8507 60 00 ex 8507 50 00 ex 8507 60 00 ex 8507 60 00
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 267
Date foreseen for mandatory review
31.12.2020 31.12.2022 31.12.2020 31.12.2019 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2
— of 72 a nominal capacity Ah or more, but not than 100 more Ah, V 3,2 of voltage nominal — a kg — kg but not more than 3,4 more, weight of 1,9 a ( for use in the manufacture of vehicle hybrid rechargeable batteries electric — a width of 352,5 mm (± mm) 1 or 367,1 mm (±1mm) mm) mm (± 1 mm) or 272,6 — 2 mm (± a depth of 300 1mm) mm (± — or 229,5 mm) mm (± 1,4 a height of 268,9 — kg kg or 46,3 a weight of 45,9 and Ah 75 of rating — a V 60 of voltage nominal — a — of 10 a nominal capacity Ah or more, but not than 20 more Ah; — a nominal voltage of 12,8 0,05) V (± or more, but not more than 15,2 0,05); V (± — a power of 128 Wh or more, but not than 256 more Wh, ( for use in bicycle drives the manufacture of electric mAh or more, for use in the manu 200 mm or more, having a nominal of 17,2 capacity of 1 ( facture of rechargeable batteries Description Lithium-ion-accumulator or module with: with: module batteries, or rechargeable Lithium-ion-accumulator lithium-ion in incorporation for modules Rectangular with: accumulator cylindrical Lithium-ion and module, a diameter mm or more length or of 63 with a accumulator lithium-ion Cylindrical 23 25 27 30 TARIC
CN code ex 8507 60 00 ex 8507 60 00 ex 8507 60 00 *ex 8507 60 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 268
Date foreseen for mandatory review
31.12.2020 31.12.2020 31.12.2020 31.12.2019 Supplementary unit — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
— mm mm or more, but not more than 300 a length of 150 mm 000 — mm or more, but not more than 1 a width of 700 mm 500 mm or more, but not more than 1 100 — a height of 1 — kg kg or more, but not than 160 more a weight of 75 — than 150 not less than 500 Ah and nominal capacity not more Ah a mm 000 mm or more, but not more than 2 200 — a length of 1 mm 300 — mm or more, but not more than 1 a width of 800 mm 800 mm or more, but not more than 2 000 — a height of 2 kg 000 kg or more, but not than 3 more 800 — a weight of 1 200 Ah 800 Ah or more but not than 7 — of 2 a nominal capacity mm, 4,15 than more not of thickness — a mm, 245,15 than more not of width — a mm, 90,15 than more not of length — a mAh, 000 mAh but or more not more than 10 000 — of 1 a nominal capacity g 250 than more not of weight — a for use in the manufacture of products falling within subheading 8471 30 00 ( with: polymer battery Rechargeable lithium-ion mAh, 060 1 of capacity nominal — a — 0,2 C voltage at a nominal voltage of 7,4 discharge), V (average 0,05), (± V 8,4 of voltage charging — a Description Lithium-ion accumulator, with: accumulator, Lithium-ion with: accumulator, Lithium-ion with accumulators, Lithium-ion 45 20 33 37 43 TARIC CN code ex 8507 60 00 ex 8507 60 00 ex 8507 60 00 ex 8507 60 00 ex 8507 80 00
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 269
Date foreseen for mandatory review
31.12.2020 31.12.2022 31.12.2022 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
)
2
)
2 — a thickness of not more than 4,15 mm, 4,15 than more not of thickness — a mm, 75,15 than more not of width — a mm, 150,15 than more not of length — a mAh, 000 mAh but or more not more than 10 000 — of 1 a nominal capacity g, 150 than more not of weight — a for use in the manufacture of products falling within subheading 8517 12 00 ( — mm, mm or more, but not more than 408 a length of 298 — mm, mm or more, but not more than 209 a width of 33,5 — mm, mm or more, but not more than 228 a height of 138 kg, and — kg more, but not more than 17 or weight of 3,6 a 158 — Wh a power of 458 Wh or more, but not than 2 more mm, 297 mm or more, but not more than 1 203 — a length of 1 — mm, mm or more, but not more than 772 a width of 282 — a length of 86,4 mm ((± 0,1), ((± mm 86,4 of length — a 0,1), (± mm 45 of width — a 0,1), (± mm 11 of height — a ( for use in the manufacture of cash registers Description Lithium-ion accumulators, with accumulators, Lithium-ion with: accumulators of ion lithium electric the assembly of batteries Modules for module: or rechargeable accumulators electric of lithium-ion Batteries 47 50 53 TARIC
CN code ex 8507 60 00 *ex 8507 60 00 *ex 8507 60 00 ______
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 270
Date foreseen for mandatory review
31.12.2020 31.12.2021 31.12.2021 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
— a length of 1 213 mm or more, but not more than 1 575 mm, 575 mm or more, but not more than 1 213 — a length of 1 mm, 200 — but than mm or more not more 1 a width of 245 — mm, mm or more, but not more than 755 a height of 265 — kg, kg or more but not than 294 a weight of 265 Ah, 66,6 of capacity nominal — a 48 put up in packs modules of — 3,8 VDC, 3,5 VDC to — 300 mAh to 900 mAh and — a diameter of 10,0 mm to 14,5 mm mm 820 — mm or more, but not more than 2 a length of 700 mm 660 — mm or more, but not more than 1 a width of 935 mm — mm or more, but not more than 700 a height of 85 kg 700 than more not but more, kgor 250 of weight — a kWh 175 than more not of power — a — mm, mm or more, but not more than 839 a height of 792 — kg, kg or more, but not than 293 more a weight of 253 — kWh, and kWh or 26 power of 22 — constituted of 24 or 48 modules Description Lithium-ion rechargeable batteries, with: batteries, rechargeable Lithium-ion with cell ion lithium Cylindrical with: batteries, rechargeable Lithium-ion 60 65 71 TARIC CN code ex 8507 60 00 ex 8507 60 00 ex 8507 60 00
M6 M8 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 271
Date foreseen for mandatory review
31.12.2021 31.12.2020 31.12.2020 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
)
2
— a metal casing, metal — a mm), 0,15 (± mm 173 of length — a mm), 0,1 (± mm 21 of width — a mm), 0,15 (± mm 91 of height — a and, V 3,3 of voltage nominal — a — of 21 a nominal capacity Ah or more casing, metal — a mm), 3 (± mm 171 of length — a mm), 1 (± mm 45,5 of width — a mm), 1 (± mm 115 of height — a and V 3,75 of voltage nominal — a Ah 50 of capacity nominal — a ( for use in for the motor manufacture of batteries vehicles rechargeable — mm more, but not more than 350 mm or of a length of 312 — mm mm or more, but not more than 225 of a width of 79,8 mm — mm or more, but not more than 168 of a height of 35 — kg kg or more, but not more than 8,56 of a weight 3,95 — of 66,6 with a rating Ah or more, but not than 129 more Ah Description Rectangular lithium-ion-accumulator, with lithium-ion-accumulator, Rectangular with module, or batteries: lithium-ion-accumulator rechargeable Rectangular lithium-ion in incorporation for modules Rectangular 75 80 85 TARIC CN code ex 8507 60 00 ex 8507 60 00 ex 8507 60 00 ______
M7 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 272
Date foreseen for mandatory review
31.12.2021 31.12.2020 31.12.2020 31.12.2019 Supplementary unit p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
according to a stored program, stored according to a full) and/or filter and/or dust bag full (suction capacity — a width of 70 mm (± 5 mm), 5 (± mm 70 of width — a — a thickness of 0,4 mm (± 0,2 mm), mm, 55 than more not of length — a ( for use in batteries the rechargeable manufacture of lithium-ion electric Printed circuit board without a housing for actuating and controlling vacuum cleaner brushes powered by a motor with an output of not more than 300 W Electronic circuit cards that: — connected are by or radio frequency wire to each other and card, and the motor controller the functioning regulate on (switching or off and suction of vacuum — capacity) cleaners vacuum display the functioning of that cleaner with indicators — whether or not fitted igniter, — an bracket, mounting integrated an with assembly plug on coil — a housing, — a mm), 5 mm (+/– — mm or more but not than 200 more a length of 90 — of – 40 an operating temperature °C or more but not than 130 more °C, — a voltage of 10,5 V or more, but not more than 16 V Description Cut plate of nickel-plated copper foil, with: foil, copper nickel-plated of plate Cut with: assembly coil integrated Igniter 10 20 96 98 70 30
TARIC CN code ex 8508 70 00 ex 8508 70 00 ex 8507 90 80 ex 8537 10 98 ex 8537 10 98 ex 8511 30 00
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 273
Date foreseen for mandatory review
31.12.2019 31.12.2020 31.12.2021 31.12.2021 Supplementary unit — p/st p/st —
duty 0 % 0 % 0 % 0 % Rate of autonomous ), and
2
)
2
)
2
) and molybdenum disilicide (MoSi
4
N
3
— mm, mm or more, but not more than 200 with a length of 50 — of – 40 with an operating temperature °C or more, but not more than 140 °C, and — with a voltage of 9 V or more, but not more than 16 V, cable, connection without or — with ( of engines of motor vehicles use in the manufacture for °C, 800 than more of temperature operating — an — a voltage of 5 V or more, but not more than 16 V, (Si nitride silicon heating rod containing — a housing metal — a ( engines of motor vehicles of diesel use in the manufacture for the manu kind used in a than 14,4 V, of but not more 12 V or more, of voltage operating of goods facturing of Chapter 87 LEDs, — two — by the LEDs, the light emitted lenses, focusing/scattering glass or plastic — by the LEDs, the light emitted redirecting reflectors in an aluminium housing with an actuator mounted a bracket with a radiator, at Description Glow-plug for pre-heating of the diesel engines with: coil: engines Ignition diesel the of pre-heating for Glow-plug least: at containing in a vehicle with an date and displaying time, screen status of safety features Information at least module, Lighting 55 20 20 30 TARIC
CN code ex 8511 80 00 ex 8512 20 00 ex 8512 20 00 *ex 8511 30 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 274
Date foreseen for mandatory review
31.12.2019 31.12.2019 31.12.2020 31.12.2018 Supplementary unit p/st p/st p/st
— 0 duty 0 % 0 % 0 % Rate of autonomous
)
2
the side of the mirror glass), the side of mirror — a plastic holder with three or more brackets, more or three with holder plastic — a bulbs, V 12 more or — one connector, — a cover, plastic — a cable connection a with not or — whether ( for use in the manufacture of goods of Chapter 87 with a voltage of 12 V, comprising: — coil, — magnet, membrane, — metal — connector, — holder a kind of of goods used in the manufacture of Chapter 87 principle, containing: board, circuit printed — a connector, — a holder metal a not or — whether a kind of of goods used in the manufacture of chapter 87 Car door heating foil: mirror contacts, electrical two — with — and on on holder of the mirror with an adhesive both layer (on the side of plastic sides on film paper protective a — with Description Fog lamp with a galvanised inner surface, containing: signal, surface, sound inner specific galvanised a piezo-mechanic a generating the with for on lamp principle operating Fog piezomechanical casing on plastic operating a assembly in Horn system sensor parking for buzzer Warning 10 20 40 10 20 TARIC CN code ex 8512 40 00 ex 8512 20 00 ex 8512 30 90 ex 8512 30 90 ex 8516 80 20
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 275
Date foreseen for mandatory review
31.12.2019 31.12.2019 31.12.2022 31.12.2019 Supplementary unit p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2 Cavity assembly comprising at least: comprising at Cavity assembly — 000 W with an input of not more than 240 V and an output of not more than 3 transformer a — an AC or DC fan motor with an output of not more than 42 watts steel stainless of made housing — a — with or without a microwave output a magnetron of power of not more than 900 W for use in of built-in products the manufacture of headings 8514 2080, 8516 5000 and 8516 6080 ( 600 rpm, — 4 of 8 with a motor having W at a power rating fitted circuit, electronic an by — governed °C, 110 above temperatures ambient at — operating thermoregulator a with — fitted openings, central and side — containing aluminium, annealed — of °C 200 than more to resistant heat coating, ceramic a — with ( for use in the manufacture of fryer an electric ( 8516 6080 8514 2080, 8516 5000 and headings of products built-in of manufacture Description Ventilation sub-assembly of an electric deep-fat fryer: deep-fat electric an the of in sub-assembly use Ventilation for choke wavelength and pot: element Inner sealing capacitive a incorporating assembly Door 10 10 10 60 70 80 TARIC
CN code ex 8514 20 80 ex 8516 50 00 ex 8516 60 80 ex 8516 90 00 ex 8516 90 00 *ex 8516 90 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 276
Date foreseen for mandatory review
31.12.2018 31.12.2022 31.12.2021 31.12.2019 Supplementary unit — p/st — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
— an impedance of 3 Ohm or more, but not more than 16 Ohm, — a nominal power of 2 W or more, but not more than 20 W, and bracket, plastic without or — with — with connectors, fitted cable with or without electric of a kind used TV for sets and as well home video monitors manufacture entertainment systems — of an impedance of 1,5 Ohm or more, but than 10 not more Ohm, mm, — mm or more but not than 80 of 25 of a diameter kHz, 20 to Hz 150 of range frequency — with — power of 5W or more, but not more than 40W,and with rated — with connector, cable whether or not with electric bracket a with not or — whether ( of goods used in the manufacture of Chapter 87 which, excluding connecting points, do not exceed 5 mm × 6 mm × 8 mm functionality with dual and/or multi-channel and amplification Description Loudspeakers of: of dimensions Loudspeakers exterior the housing a in contained Loudspeaker aids, hearing for earphone and Headphone audio signal decoding, audio signal processing digital board sub-assembly, comprising Circuit 30 40 20 91 TARIC
CN code ex 8518 29 95 ex 8518 30 95 ex 8518 40 80 *ex 8518 29 95 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 277
Date foreseen for mandatory review
31.12.2021 31.12.2019 31.12.2020 31.12.2021 Supplementary unit — p/st — p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
4,40 mm (± 0,05 mm) circuits W, 50 of power output — an — more than 9 V but not more than 16 an operating voltage of V, Ohm, 4 than more not of impedance electrical — an dB 80 than more of sensitivity — a housing metal a — in ( for use in the manufacture of motor vehicles — form of a disk on in the coreplate, one a steel side provided with a cylinder magnet neodymium — a plate upper — an plate lower — a of a kind used in car loudspeakers steel, — of and — perforated — measuring 60,30 mm (+ 0,00 mm/– 0,40 mm) × mm 15,5 (+ 0,00 mm/– mm) 0,40 ( for use in the manufacture of loudspeaker passive radiators × Description with: and power amplifier equalizer supply, power active board sub-assembly, comprising Circuit amplifier power Audio of: consisting system Magnet plate Metal 92 93 30 35 TARIC CN code ex 8518 40 80 ex 8518 40 80 ex 8518 90 00 ex 8518 90 00
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 278
Date foreseen for mandatory review
31.12.2019 31.12.2019 31.12.2019 31.12.2018 31.12.2020 31.12.2019 Supplementary unit p/st p/st — p/st p/st —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
LAN connector kind used in car loudspeakers car kind used in mm, — mm or more but not than 250 of 25 an outside diameter Hz, — Hz or more but not than 150 a resonance frequency of 20 mm, — but not than 50 mm or more more height of 5 a total mm — mm or more but not than 3 an edge thickness of 0,1 the shape of a disk, whether or not containing of a kind a hole in the centre, used in car loudspeakers — and coating and magnet system holder with a protective a speaker frame cloth anti-dust embossed — an ( cylinder, for use in the manufacture of loudspeakers drive, disk hard a — without drive, DVD-RW a without or — with — via through of motion detection connectivity IP capability or motion detection with either port, serial USB a without or — with ( for use in television the (CCTV) manufacture of surveillance systems closed-circuit Description Upper plate for a loudspeaker magnet system of integrally punched, stamped and plated steel, in steel, plated and stamped a punched, with with integrally speaker provided of electrodynamic side system an one magnet for Loudspeaker cone, made from paper pulp or polypropylene, with accompanying dustcaps, of a on loudspeaker Diaphragm disk a of: a for of consisting plate form housing, Upper the loudspeaker in car coreplate, Integrated steel cold-upsetted recorder: Integrally video Digital 40 50 60 80 91 20 TARIC CN code ex 8518 90 00 ex 8518 90 00 ex 8518 90 00 ex 8518 90 00 ex 8518 90 00 ex 8521 90 00
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 279
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2019 Supplementary unit p/st p/st p/st
duty 0 % 0 % 0 % Rate of autonomous
) )
2 2
within the assembly) without signal processing capabilities, within the assembly) chipset, within the assembly, with a signal decoder, — a printed circuit, printed — a contained in a housing, circuit, a monolithic integrated of a photo-detector, in the form — connectors, 3 than more — not transistor, 1 than more — not — and 4 fixed resistors, not more than 3 variable capacitors, 5 than more — not the whole mounted on a support board Printed circuit assembly comprising: — of receiving and a radio tuner (capable decoding radio signals those and signals transmitting tuner the controlling and messages control remote receiving of capable microprocessor — a ( for use in the manufacture of home systems entertainment board Printed circuit subassembly, comprising: — a radio tuner, capable of and receiving decoding those radio signals and signals transmitting receiver, control remote (RF) frequency radio — a transmitter, signal control remote infrared — an generator signal SCART — a sensor state TV — a ( for use in the manufacture of home systems entertainment Description player, comprising: of a compact disc read-head a laser assembly for Electronic 60 10 65 20 25 40 50 TARIC CN code ex 8522 90 49 ex 8527 99 00 ex 8522 90 49 ex 8527 99 00 ex 8522 90 49 ex 8529 90 65 ex 8529 90 65
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 280
Date foreseen for mandatory review
31.12.2018 31.12.2021 31.12.2018 31.12.2018 31.12.2018 31.12.2018 Supplementary unit p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2
signal converter integrated circuit of Metal holder, metal, for use fixing metal in item or internal stiffener of the manufacture ( televisions, monitors and video players capable of double layer recording functions, whether or not incorporating or control with driver circuits board containing integrated ( within heading of products 8521 falling for use in the manufacture a transformer, circuit and one beam splitter reading and/or writing optical a laser video least and/or audio signals, comprising at of digital printed containing a board or circuit printed DC motors and not containing a more one or unit, manufacture sounds use in the of signal processing for and images, for board not capable circuit ( 8543 or 8526, 8527, 8528 8519, 8521, headings within falling products of Description and a circuit integrated driver a laser circuit, printed a flexible Assembly, comprising at least reproduction and/or recording the for units) mecha called (so Assembly for optical discs, an comprising optical unit and at least DC motors, whether or not assembly unit a motor and circuit a printed least Video tape recording/reproducing assembly comprising at drive optical diode, one photo integrated CD consisting of one laser detector player, reading head for Optical Laser 30 57 70 65 70 75 80 TARIC
CN code ex 8522 90 80 ex 8529 90 92 ex 8522 90 49 ex 8522 90 80 ex 8522 90 80 ex 8522 90 80 ex 8522 90 80 ______
M8 M7 M6 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 281
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2021 31.12.2018 Supplementary unit p/st p/st p/st p/st —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2 )
2
)
2 )
2
discs, comprising at least: discs, comprising at wavelengths, different three at operating diodes — laser and circuit integrated detector photo — a actuator, — an ( for the manufacture of products falling within heading 8521 comprising at least: wavelengths, different three at operating diodes laser with unit up pick optical — an motor, spindle — a motor stepping — a ( within heading of products 8521 falling in the manufacture comprising an image sensor, an and objective a color processor, having an image resolution of the housing, for and/or cable with fitted not or whether 1280 pixels, 1024 × than more not ( 00 12 of goods manufacture of subheading 8517 facture of ( products falling under heading 8521 Description Blu-ray optical pick-up unit, whether or not recordable, for use with Blu-ray, DVD and CD and DVD Blu-ray, discs, with CD use and for DVD recordable, Blu-ray, not with or use whether for unit, pick-up recordable, optical not Blu-ray or whether mechanism, manu drive the Blu-ray in use for signals, mid-frequency use for motor, video and audio heads an electric with video heads or head drum, with Video into signals high-frequency transforming Tuner Assembly for television cameras of dimensions of not more than 10 mm × 15 mm × 18 mm, 83 84 85 97 20 TARIC
CN code ex 8522 90 80 ex 8522 90 80 ex 8522 90 80 ex 8522 90 80 ex 8525 80 19 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 282
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2 Semiconductor (CMOS) sensor, Semiconductor (CMOS) × length), prism block for distribution of the RGB spectrum colours to the three sensors, compensation pixel and defective Camera: — kg, of a weight not more than 5,9 housing, a — without — mm, mm × 315 of dimensions of not more than 405 with a single Charge-Couple-Device (CCD) or Complementary Metal Oxide — — pixels of not more than 5 megapixels, with effective systems or in appliances for (CCTV) surveillance television use in closed circuit for eye-checks ( — than 27 not more × 30 of × 38,5 socket) cable dimensions (without × height with mm (width — and a megapixels per sensor effective MOS imaging sensors with two or more with three mount, lens C-Mount a — with g, 70 than more not of weight a — with output, video digital LVDS an — with — with a permanent EEPROM data for colour memory rendering for local storage of calibration ( for use in the manufacture of industrial camera systems miniaturised ( manufacture of products falling within heading 8528 Description Remote camera head, whether or not contained in a housing a in contained not or whether head, camera Remote Camera module with a resolution of 1 920 × 1 080 P HD with two microphones for use in the 31 10 50 55 TARIC
CN code ex 8525 80 19 ex 8525 80 91 ex 8525 80 19 ex 8525 80 19 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 283
Date foreseen for mandatory review
31.12.2019 31.12.2020 31.12.2019 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
)
2 m, μ
m or more, but not than 17 more μ
20 % — system, overlay lines’ a ‘Dynamic’- or ‘Static signal, video NTSC output — an — a voltage of 6,5 V or more, more or lux 0,5 of illuminance — an sensor, image — an (lens), objective — an processor, colour — a — board, board or a printed circuit circuit printed a flexible — audio signals, whether or not capable of receiving — a module dimension of not more than 15 mm × 15 mm × mm, 15 — a resolution of 2 or more (16161232 mega pixel pixels and higher), and wired, not or — whether housing — a for use in the manufacture of products falling within subheading 8517 12 00 or 8471 30 00 ( 7,5 of area wavelength the in sensitivity — a pixels, 512 × 640 to up of resolution — a g, 400 than more not of weight — a — measurements of not more than 70 mm × 86 mm × 82 mm, housing a in not or — whether and plug qualified automotive- — with — than range of not more work temperature output a deviation of the signal over the entire Description Image scanning cameras, using: cameras, with: scanning interface Image electrical with: MIPI 16949), using ISO/TS Cameras to (according camera) (LWIR camera infrared wavelength Long 60 65 70 TARIC CN code ex 8525 80 19 ex 8525 80 19 ex 8525 80 19
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 284
Date foreseen for mandatory review
31.12.2022 31.12.2021 31.12.2019 31.12.2019 31.12.2018 Supplementary unit — — — — p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
)
2
2
)
2
sound generator, mm and yoke, equipped and with a deflector more than 110 manufacture of goods of Chapter 87 ( of goods manufacture of Chapter 87 or addressing, pixel for signals driving of generation — the pixels addressing — driving least: at of Assembly consisting and a — amplifier an audio frequency least unit, comprising at amplifier an audio frequency and transformer — a receiver broadcast radio — a ( for use in the manufacture of consumer electronic products — screen monochrome of not tube with a of the screen diagonal cathode-ray a flat measurement — on and which a transformer, a printed circuit are mounted unit, a video-amplifier a deflection the whole mounted of video or not on entry-phones, a chassis, for the manufacture video ( apparatus telephones or surveillance facture of goods of Chapter 87 ( of goods facture of Chapter 87 Description Radar sensor with control unit for autonomous emergency car braking system for use in manu in use the for in system use braking for car module, emergency GPS autonomous and for GSM unit containing control system with call sensor for: emergency Radar chips the semiconductor of least unit at Control comprising Modules comprising: monitor Video 20 85 20 30 75 10 TARIC CN code ex 8527 91 99 ex 8526 10 00 ex 8529 90 65 ex 8528 49 00 *ex 8526 91 20 *ex 8529 90 65
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 285
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2018 31.12.2019 Supplementary unit — — p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
6 ) (
2
)
2
supply, having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal or less, cm of 33,2 of the screen measurement frame, mounting and cover back with housing, a — without housing, a with — or permanent incorporation or mounting, used for assembly, during into goods industrial ( of Chapters 84 to 90 and 94 — apparatus, other combined with excluding those power and circuitry drive with board circuit printed a facilities, screen touch — comprising used for permanent incorporation or permanent mounting systems into for entertainment vehicles ( housing a in contained kHz), 30 (± 10,7 MHz than 30 bandwidth than 70 40 6 dB and of not more a kHz at dB, not more kHz at contained in housing 3,5 housing not more than dB, a loss of contained in 990 an insertion MHz with than 1 not more — but kHz or more no more than 100 MHz frequency range of 10 with an applicable — with a housing plates provided with electrodes of ceramic in audio visual and or resonator communi transducer a kind of used in electrical-mechanical cation equipment Description Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of frame, frequency a a on for mounted resonator assembly ceramic monitor 1 video apparatus, other combined with excluding those video monitors, colour display crystal Liquid and colour filters display ceramic crystal 2 Liquid comprising package filter Ceramic kHz), with a kHz 1,5 (± kHz) or 455 kHz 1,5 (± frequency of 450 a centre for filter Ceramic filters frequency of 485 for a center MHz but or more wave excluding acoustic filters, surface Filters, Ceramic 10 20 20 50 60 70 TARIC CN code ex 8528 59 00 ex 8528 59 00 ex 8529 10 80 ex 8529 10 80 ex 8529 10 80 ex 8529 10 80
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 286
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2019 31.12.2021 31.12.2020 31.12.2019 Supplementary unit p/st p/st p/st p/st — p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2
— a printed circuit printed — a — applications and processors for multi-media video signal processing Array) Gate Programmable (Field — FPGA memory — Flash memory — operating interfaces RJ-45 and USB VGA, — HDMI, — sockets and plugs connecting panel a LCD-monitor, LED lighting and for a control Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at and and video-processor, mounted contained a a in on a leadframe a micro-controller least plastic housing ( heading 8527 within products falling of manufacture the in use for coded signal, board for distributing supply Printed circuit voltage and to control signals a directly control on panel of a LCD a TFT glass module circuit ( under heading 8527 products falling facture of ( products falling under heading 8528 Description Electronic assembly comprising at least audio at digital manu comprising to the assembly signals in Electronic frequency use high for satellite signals, transforming mid-frequency module of into receiver manufacture signals radio the high-frequency Satellite in transforming use Tuner for signal, digital into signals high-frequency transforming Tuner 30 65 44 53 15 45 50 80 TARIC
CN code ex 8529 90 65 ex 8529 90 65 ex 8529 90 92 ex 8529 90 65 ex 8548 90 ex 8529 90 65 ex 8529 90 65 ex 8529 90 65 ______
M7 M8 M6 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 287
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2018 31.12.2020 Supplementary unit p/st p/st p/st —
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2
LCD modules, — cells, solely consisting TFT glass or plastic of one or more facilities, screen touch with combined — not — pixel addressing only, for electronics boards with control printed circuits with one or more and unit backlight without or — with inverters without or — with — cells, one or more TFT glass plastic sink, heat cast die — a unit, backlight — a and controller, micro with board circuit printed — one interface, Signalling) Differential Voltage (Low — LVDS ( for use in the manufacture of radios for motor vehicles ( mechanism and lenses, for use in of the manufacture within products falling heading 8528 magnesium, and mm, — silicon 200 2 than more not but more or mm 300 of length a — with specifically shaped for use ( in the manufacture of TV sets Description LCD modules, not combined with touch screen facilities, solely consisting of: consisting solely facilities, screen touch with combined not modules, LCD containing: alloy aluminium system, a positioning video projection, comprising a colour separation unit for Optical of ledges covering and Fastening 15 60 25 32 37 TARIC
CN code ex 8529 90 92 ex 8548 90 ex 8529 90 92 ex 8529 90 92 ex 8529 90 92 ______
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 288
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2019 Supplementary unit p/st p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0 )
2
)
2
m in monochromic applied to each individual pixel version with microlenses μ m × 12 μ
)
2 supply unit, circuits, for the manufacture of television projection equipments or video projectors ( equipments projection or video of television projectors the manufacture for circuits, within heading 8527 or products falling of manufacture use in the for circuits, and integrated 8528 ( for pixel address only and and/or control electronics with or without a power supply as embedded as well passive circuit and die, power discrete management tuner die, GSM filters broadcasting videosignals reception of digitally of DVB-T for and elements DVB-H formats with pixels of not more circuit of analogue monolithic integrated or digital, in the form cameras than 12 whether or not with a lenslet or in polychromic version with a colour filter, array) (microlens mounted with one lenslet on each individual lens) array pixel (micro composed of: noise filter, a AC socket with V, 230 of connection) cord power (for socket — AC inductors, and capacitors of composed filter noise — integrated power panel) display (Plasma PDP the with socket AC an connecting for connector — cable support, which not equipped metal joins the AC the PDP TV set or a socket to whether with Description Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control electronic transistors and of chips temperature (DMD) operating device the micromirror maintaining die, digital for decoder prisms, fins, video channel comprising cooling digital a Assembly and for containing sinks CMOS-Sensor) functionality heat or ( reception of video projectors use in the manufacture device (DMD)-chips, for micromirror Digital Aluminium TV CCD-Sensor with Interline package scan’ circuit without driver with or only display module incorporating address and display electrodes, Plasma (‘progressive Integrated sensors image Area 49 83 40 41 42 43 45 47 TARIC CN code ex 8529 90 92 ex 8529 90 92 ex 8529 90 92 ex 8529 90 92 ex 8529 90 92 ex 8529 90 92 ex 8529 90 92 ex 8536 69 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 289
Date foreseen for mandatory review
31.12.2019 31.12.2020 31.12.2020 Supplementary unit p/st p/st p/st
duty 0 % 0 % 0 % Rate of autonomous
)
2
)
2 controller, timing controller, LIN (Local Interconnect Network)bus or APIX2 (Automative and passive components, active module and other driver Link) Pixel or APIX2 interface, material, not combined with touch screen and facilities one or more printed circuit boards for pixel addressing, with control electronics for use in of TV the manufacture sets and monitors ( cm, but not more than 25,5 or more cm of 14,5 the screen of a diagonal measurement — backlight, LED — a micro Memory), Read-only Programmable (Erasable EPROM with board circuit printed — a — signalling) differential LVDS (Low-voltage pin supply to 4- power and 2 plug for 8 pin 6 to housing, a in not or — whether ( permanent incorporation or mounting of Chapter 87 for into motor vehicles — cm, more but not than 38,5 cm or of 14,5 of the screen with a diagonal measurement screen, touch a without or — with backlight, LED an — with Description OLED modules, consisting of one cells, containing or more TFT organic glass or plastic with: modules LCD module LCD 55 59 63 TARIC
CN code ex 8529 90 92 ex 8529 90 92 ex 8529 90 92 ______
M7 M6 M7 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 290
Date foreseen for mandatory review
31.12.2019 31.12.2020 Supplementary unit p/st p/st
duty 0 % 0 % Rate of autonomous
)
2
)
2
and passive components, cooling system, with or without active 31,24 cm, — the organic layer with organic LEDs, organic with layer organic — the — two conductive layers on and electron transfer electron holes, 080 920 × 1 — with resolution of 1 (TFT) of transistors layers diodes, organic of supply power for cathode and — anode filter, — RGB layer, protective plastic or — glass addressing, pixel for electronics the — without ( for use in the manufacture of goods of headings 8528 cm or more but not more than with a of diagonal the screen of 14,48 measurement — screen, touch a without or — with micro-controller, backlight, — with — and other active LVDS board with EEPROM, receiver microcontroller, with a printed circuit — interfaces, supply and CAN LVDS power plug for a with and functions control contactless — or components dynamic with or without adjustments of colour, electronic for touch-sensitive mechanical, without or with housing, a — in ( suitable for installation in motor vehicles of Chapter 87 Description OLED display consisting of: consisting 8528: display heading OLED of monitors LCD for panel display LCD Colour 65 67 TARIC CN code ex 8529 90 92 ex 8529 90 92
M6 M7 M7 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 291
Date foreseen for mandatory review
31.12.2022 31.12.2020 Supplementary unit p/st p/st
duty 0 % 0 % Rate of autonomous
)
2
differential signalling) interfaces and one or more CAN/power interfaces signalling) supply sockets or with an differential with APIX interface, APIX (Automotive Pixel Link) controller and Signalling) interface a CAN/power connector, — of an aluminium alloy containing silicon and magnesium, and silicon containing alloy aluminium an mm, — of 200 2 than more not but more or mm 500 of length a — with mm, 500 — but not than 1 mm or more more with a width of 300 of a kind used for the production of TV sets cm, — cm or more but not than 26 of 14,48 measurement with a diagonal screen screen, touch — without micro-controller, and backlight a — with — with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential module, processing signal a — without — with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage with one or more network)-controller area with a CAN — (Controller — in a housing sink the back with or without of the housing, a heat at module, signal-processing a — without feedback, acoustical and haptic with not or — whether ( of Chapter 87 of vehicles use in the manufacture for Description Rectangular fastening and covering frame: covering and fastening Rectangular housing: a in module LCD Colour 70 85 TARIC
CN code ex 8529 90 92 *ex 8529 90 92 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 292
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2018 31.12.2018 31.12.2021 Supplementary unit p/st p/st p/st — p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
connections and solder points, for use in the manufacture of back-light units for LCD modules ( Semiconductor module switch in a casing: — chip and a diode chip on lead frames, one or more consisting of an IGBT transistor 200 — V for a voltage of 600 V or 1 for direct mounting on motor an coil, electric contained in sealed housing a hermetically with a photovoltaic and input generator a power isolated circuit galvanically MOSFET output of 2 amps a voltage of 60 in a casing with connections volts or less and switch or for a current less function, switching electromechanical — an amperes, 16 exceeding not but more or amperes 3 of current load — a — a coil voltage of 5 but not volts or more exceeding 24 volts, — mm than 12,5 not more between the connector pins of load circuit a distance — with control electronics for pixel addressing only, addressing pixel for electronics control — with screen, display the moving for mechanism motorised a — with ( for permanent installation in vehicles of Chapter 87 Description Printed circuit board in the form of plates consisting of isolating material with electrical with material isolating of consisting plates of form the in board circuit Printed of 50 current A or more, comprising a snap switch, with a cut-off action switch Thermo-electric with: diode, a GaAlAs light-emitting a consisting of relay photovoltaic) called (so Photoelectric relay power A 30 83 20 11 20 40 TARIC CN code ex 8535 90 00 ex 8536 50 80 ex 8536 30 ex 8536 41 10 ex 8536 41 90 ex 8535 90 00
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 293
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2021 31.12.2020 31.12.2021 Supplementary unit — — — p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
He/sec at one bar in the
3
)
2
)
2
galvanically isolated input circuit with one or two photovoltaic generators and two power photovoltaic generators two with one or input circuit isolated galvanically MOSFET output in switches a casing with connections for a maximum voltage of 60 volts 2 amps of minimum current and a DC V 12 of voltage nominal — a DC V 16 than more not of voltage allowable — an %) 10 (± Ohm 7 26, of °C 20 at resistance coil — a V 8,5 than more not of °C 60 at voltage pick-up — a — 20 a drop-out voltage at °C of 1 V or more Watts 5,4 of °C 20 at power operating nominal — a DC V 400 than more not of voltage switching — a A 120 than more not of capacity current-carrying permanent — a ( for use in vehicles the for manufacture of electric batteries galvanically isolated input with and photovoltaic circuits four power generator(s) MOSFET a voltage of more than 60 output in a casing with connections volts switches for cm of 10-6 length excluding maximum leakage rate with a wires, housing temperature range 0 °C to 160 °C, to be incorporated into compressors for refrigerating equipment ( Description Thermal relays contained in a hermetically sealed glass cartridge of not more than 35 mm in mm two 35 diodes, than light-emitting diode, a GaAlAs light-emitting a consisting of relay photovoltaic) called (so Photoelectric more GaAlAs with: not two Relays of of cartridge consisting glass relay sealed photovoltaic) hermetically called a (so in Photoelectric contained relays Thermal mount of 4,9 type, 0,9 circuit operating at a force N (± Switch of the printed N), contained in a 50 30 40 91 31 TARIC CN code ex 8536 41 90 ex 8536 49 00 ex 8536 49 00 ex 8536 49 00 ex 8536 50 11
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 294
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2019 31.12.2021 Supplementary unit p/st — p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
) )
2 2
)
2
)
2 60 V and at a current strength of not more than 50mA, for use in the manufacture of products manufacture use in the than 50mA, of not more for strength a current 60 V and at ( headings 8521 8528 or least: board, circuit — printed diode, — LED — connector, mounting for — brackets ( for use in the manufacture of goods of Chapter 87 3 connections housing with mono more one or functions, comprising and switching controller having adjustable Devices, lithic integrated circuits whether or not combined with semiconductor elements, mounted and housing contained on in a plastic together a leadframe — a voltage of 240 but than V or more not more 250 V, — but of 4 an amperage A or more not more than 6 A, ( for use in the manufacture of machines falling within heading 8467 — a voltage of 240 but than V or more not more 300 V, — but of 3 an amperage A or more not more than 15 A, ( for use in the manufacture of machines falling within heading 8467 Description Mechanical tact switch for connecting electronic circuits, operating at a voltage of not more than more not of voltage a at operating circuits, electronic connecting for switch tact Mechanical with: Push-button switch for keyless for a start voltage of 12 V in a housing, plastic comprising at circuits, electrical connecting for a contained in and 2 capacitors, sensor effect 1 Hall 1 magnet, comprising switch, effect Hall switches with: governer circuits, speed electrical Mechanical connecting for switches Mechanical 93 97 32 40 91 81 82 TARIC CN code ex 8536 50 19 ex 8536 50 11 ex 8536 50 11 ex 8536 50 19 ex 8536 50 80 ex 8536 50 80 ex 8536 50 80
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 295
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2022 31.12.2020 31.12.2019 Supplementary unit p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2
)
2
not more than 50 ms and an actuating current of not more than 500 mA at a voltage of 12 a mA at V of not more than 500 not more than 50 ms and an actuating current 5 A, for not more than of strength current a than 250 V and at more but not 220 V or ( of products of headings 8521 use in the manufacture or 8528 ( the manufacture of products within falling headings 8521 and 8528 ( use in the production and mm, for of hearing aids speech processors than 10,8 integrating at least: — core, including a wide-band ferrite a pulse transformer, coil, mode common — a resistor, — a capacitor, — a for use ( in the manufacture of products falling within headings 8521 or 8528 Description Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time of time switching a with of switches, voltage electromagnetic a 3 at comprising operating circuits, cable, electronic coaxial connecting for for unit sockets, switch Switch other push-button with Mechanical combined not or whether networks, housing, metal or with 21 use in SCART pins in 2 rows, type connectors, built into a plastic for area local for sockets and plugs of not more with a length not of more than 12,7 mm or a diameter Electrical plug or socket Modular 93 98 51 60 82 TARIC
CN code ex 8536 50 80 ex 8536 50 80 ex 8536 69 90 ex 8536 69 90 *ex 8536 69 90 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 296
Date foreseen for mandatory review
31.12.2020 31.12.2021 31.12.2021 31.12.2022 31.12.2021 31.12.2020 Supplementary unit p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2
)
2 USB devices, for use in the manufacture of goods falling within headings 8521 or 8528 ( 8528 headings 8521 or within goods falling of manufacture the in use for USB devices, ( within headings of products 8521 falling manufacture or 8528 within of products falling housing, 19 use in the manufacture 20 with pins or pins in 2 rows, for ( headings 8521 8528 or female connectors and interfaces, of a kind used for soldering on printed circuit boards, for with a circuits electrical and or protecting switching apparatus and circuits connecting electrical 000 V voltage of not more than 1 ( 8528 8521 or 000 V with contact pads, voltages of not for more than 1 Description Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other with connecting for form multiple or single a in plug or socket (USB) (cards)’ bus modules serial interface Universal ‘Common and Card’ the use in housing, than 96 pins, for no more with metal or plastic a into plug, built or Socket ‘Smart CompactFlash, (HDMI) type socket or plug, High-Definition Multimedia Interface built into a plastic or metal (SD), Digital Secure socket, plug Optical or connector, for use of goods in the manufacture within headings falling Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped 84 85 86 88 10 20 TARIC
CN code ex 8536 69 90 ex 8536 69 90 ex 8536 69 90 ex 8536 70 00 ex 8536 90 95 *ex 8536 69 90 ______
M8 M6 M7 M8 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 297
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2018 31.12.2020 Supplementary unit p/st p/st p/st p/st
duty 0 % 0 % Rate of autonomous 0 % 0
0 % 0
of tin oxide and of indium oxide taken together — of copper — of — nickel alloy AgNi10 containing plated with silver by or with silver weight 11,2 % (± 1,0 %) mm) 0/+ 0,015 — mm (– plating of 0,3 with a thickness of the gilded not or — whether connector, of rubber or silicone, consisting of one or more conductor elements Elastomeric fuses, without or with — sockets ports, — connecting relay and switch micro microprocessor, embedded with board circuit printed — a a kind of of goods used in the manufacture of chapter 87 Description Rivet contacts Rivet connections comprising: with brackets frame mounting stamped with Metallic housing plastic a in module control Fuse 94 10 40 92 50 TARIC
CN code ex 8536 90 95 ex 8536 90 95 ex 8544 49 93 ex 8537 10 91 *ex 8536 90 95 ______
M8 M7 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 298
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2022 Supplementary unit p/st p/st —
duty 0 % 0 % 0 % Rate of autonomous
630 mm × 420 mm × 230 mm, mm × 230 mm × 420 630 Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least: — an AC power input of 208 but V or more not more than 400 V, DC, V 24 of input power logic — a breaker, circuit automatic — an switch, power main — a cables, and connectors electrical external or — internal mm or more, but than not more mm × 75 — mm × 180 in a housing 281 with dimension of of a kind used for manufacturing recycling or sorting machines operation of a combustion working motor and/or various actuators with a combustion motor, comprising at least components, passive and active with circuit printed — a and housing, aluminium — an connectors — multiple frames, lead separate on interconnected, not circuits, integrated more or — one Description of: 000 V, of a kind used the for for a voltage not exceeding memory controller 1 Programmable consisting memory programmable without ICs bridge Motor 60 45 70 30 TARIC
CN code ex 8537 10 91 ex 8537 10 98 ex 8537 10 98 *ex 8537 10 91 ______
M8 M7 M6 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 299
Date foreseen for mandatory review
31.12.2020 31.12.2019 31.12.2019 Supplementary unit p/st p/st p/st
duty 0 % 0 % 0 % Rate of autonomous
motors in cars wiper timing, window lighting, belt reminder seat heating, interior in vehicles (for connection of audio, service) (for telephony, car in vehicles navigation, and wireless camera containing: knobs rotary — 2 pushbuttons more or — 27 lights — LED — receiving and sending via the LIN-bus for of control signals circuits 2 integrated holder, of: board inside and with or without metal circuit printed mm, — mm or more, but not more than 120 a length of 50 — a width of 20 mm or more but not more than 40 mm, mm — mm or more, but not more than 120 a height of 30 a kind of of goods used in the manufacture of Chapter 87 holder, metal and board circuit printed with box — plastic — with voltage of 9 V or more, but not more than 16 V, — least in an automobile, at services and assisting manage functions of to control, evaluate able a kind of of goods used in the manufacture of Chapter 87 — also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC housing plastic a in — mounted Description Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with box plastic comprising pressure tyre vehicle car control unit without Electronic memory, for a voltage of 12 V, for information exchange systems monitoring for comprising unit control Module) Electronic Control (Body BCM unit control Electronic 35 40 50 TARIC CN code ex 8537 10 98 ex 8537 10 98 ex 8537 10 98
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 300
Date foreseen for mandatory review
31.12.2019 31.12.2021 31.12.2021 31.12.2018 Supplementary unit p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2 — a microprocessor, — a indicators, (LCD) display crystal liquid or (LED) diode — light-emitting circuit, printed a on mounted components — electronic 00 and 50 80, 8516 20 for use in the of built-in products manufacture of headings 8514 8516 60 80 ( — (push-button, or other), switches rotary electrical with one single or multi-positional or more cables, electrical and boards circuit printed with equipped not or — whether — for a voltage of 9 but V or more not more than 16 V, a kind of of motor vehicles Chapter used in the manufacture 87 housing, in a voltage of 12 apparatus, a plastic for V, whether or not with: antenna, — an connector, — a holder, metal — a ( for use in the manufacture of goods of Chapter 87Â ( temperature control systems Description Electronic assembly consisting of: consisting wheel: assembly steering Electronic the under module control for Lever Control unit for keyless switching access to vehicle and vehicle starting, with electrical control units for a voltage of 12 Electronic V, for use in the manufacture of vehicle mounted 60 65 75 93 TARIC
CN code ex 8537 10 98 ex 8537 10 98 ex 8537 10 98 ex 8537 10 98 ______
M7 M8 M6 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 301
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2019 31.12.2021 31.12.2018 31.12.2018 31.12.2021 Supplementary unit p/st p/st p/st p/st p/st — p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
2 Unit consisting of two junction field effect transistors contained housing in a dual transistors lead frame Unit consisting of two effect junction field Interior antenna for a car door locking system, comprising: housing, plastic a in module antenna — an — a connection with a plug, cable brackets mounting two least — at transistors and diodes circuits, integrated including PCB not or — whether a kind of of goods used in the manufacture of CN heading 8703 pad switches steering for covers and cases styrene butadiene acrylonitrile or Polycarbonate whether or not coated paint on the outside resistant with a scratch component, and a buttons switches of or other type of switches, without any switches, electrical kind used in the dashboard of Chapter 87 of motor vehicles mm mm × 48 dimensions of which do not exceed 5 casing, the exterior more components than IGBT chips and diodes with a voltage of 650 V or more but not more ( 200 V than 1 Description Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical a to attached wire copper coated tin a of consisting fuse, electrothermal box, of a plastic switches, pressure with light guides, form Front control panel, in the rotary an of Part Copper base plate, of a kind of IGBT modules used containing as a heatsink in the manufacture Photomultiplier 94 20 30 20 50 10 60 92 95 91 TARIC CN code ex 8537 10 98 ex 8538 90 91 ex 8538 90 99 ex 8543 70 90 ex 8538 90 99 ex 8547 20 00 ex 8538 90 99 ex 8538 90 99 ex 8538 90 99 ex 8540 20 80
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 302
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2021 31.12.2021 Supplementary unit — — — p/st — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
0 % 0
output, for use in the manufacture of products falling within subheading 8516 50 00 ( mm excluding leads. The tube contains one or mm × more 350 of which do not exceed 300 or or line consisting of fluorescent in rows, or lines arranged each character rows of characters phosphorescent mounted are elements. These elements on base which a metallised is covered when light bombarded which substances or phosphorescent with give off salts with fluorescent electrons polyester, of layers outer — two and silicone, and polymer acrylic of layer middle — a terminals connection electric — two housing capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing Description Continuous wave magnetron with a fixed frequency of 2 460 MHz, packaged magnet, probe magnet, packaged MHz, 460 2 of frequency fixed a with a magnetron in wave contained Continuous circuit, printed tube a Displays in form of a tube consisting the of a glass housing mounted on a board dimensions the display of: on fluorescent consisting mounted Vacuum film elements electrochromic passive Laminated and active of consisting Amplifier, discrete more and one or circuits integrated more one or comprising amplifier High-frequency 20 91 92 15 30 33 TARIC
CN code ex 8540 71 00 ex 8540 89 00 ex 8540 89 00 ex 8543 70 90 ex 8543 70 90 ex 8543 70 90 ______
M7 M6 M7 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 303
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2021 Supplementary unit — p/st p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous
one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a passive devices) chips, not with IPD (integrated whether or capacitor discrete one or more metal flange in a housing more than 870 MHz, capable of switching VHF and UHF signals, and consisting of active mounted passive elements contained in a housing on a printed circuit, housing a 67 MHz, contained in whether circuit, and one photodiode amplifier circuit, with driving equipped an integrated with diodes and at light-emitting or one more circuit arrays gate logic not with an integrated or logic gate arrays whether or not 2 with an integrated photodiodes circuit, least with an amplifier circuit or other integrated circuits, contained in a housing not and mounted passive elements active on a substrate, contained in housing mounted on a printed circuits integrated 3 monolithic and playback, 2 or comprising record contained in a housing or a lead frame, circuit housing contained in a capacitor, and an adjustable crystal a piezo-electric mounted contained active and in a housing passive elements of on circuit, a printed Description Gallium nitride (GaN) high-frequency amplifier consisting of one or more discrete transistors, discrete to more MHz or 1,8 one of of range consisting frequency amplifier a high-frequency within (GaN) frequency, nitride fixed Gallium a with least oscillator at modulator, Radio frequency (RF) operating with a frequency range of 43 MHz or more but not crystal mounted Piezo-electric are which consisting on comprising diodes one circuit whether or more (LEDs), or not light-emitting Opto-electronic oscillators, circuit compensated printed temperature a frequency of 20 with a GHz centre than or more but Oscillator, not more than 42 GHz, consisting of comprising other oscillator, and simultaneous storage audio data stereo of capable and reproducing circuit, Audio recording (VCO), compensated oscillator Temperature controlled Voltage 34 35 45 55 60 65 80 85 TARIC CN code ex 8543 70 90 ex 8543 70 90 ex 8543 70 90 ex 8543 70 90 ex 8543 70 90 ex 8543 70 90 ex 8543 70 90 ex 8543 70 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 304
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2021 Supplementary unit p/st — —
duty 0 % 0 % 0 % Rate of autonomous
)
2
with the Media Orientated Systems Transport network (MOST), Systems Transport with the Media Orientated mm), 0,03 mm (± more than 0,8 — a mains power/CAN (Controller area network) output socket, output network) area (Controller power/CAN mains — a and ports IN/OUT audio and (USB) bus serial universal — a systems operating phone smart of interface the for device switching video a — incorporating ( of Chapter 87 of vehicles use in the manufacture for with: cable flexible PET/PVC insulated V, 60 than more not of voltage — a A, 1 than more not of current — a °C, 105 than more not of resistance heat — a mm) and a width of not — 0,01 mm (± of a thickness not more than 0,1 individual wires and mm 0,5 than more not of conductors between distance — a — a pitch (distance from centreline to centreline of mm conductors) of not more than 1,25 signal, containing: cable, coaxial — a and connectors, more or — two dashboard the to attachment for clips plastic more or — 3 a kind of of goods used in the manufacture of Chapter 87 Description Mobile telephone view and control module comprising of: comprising module control and view GPS telephone not Mobile or whether and signal (AM/FM) radio of transmission the for cable connecting Antenna 10 20 20 95 30 TARIC
CN code ex 8544 20 00 ex 8544 42 90 ex 8543 70 90 ex 8544 49 93 *ex 8544 20 00 ______
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 305
Date foreseen for mandatory review
31.12.2018 31.12.2019 31.12.2019 31.12.2021 31.12.2020 Supplementary unit p/st p/st — p/st —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
) )
2 2
measuring some or all of the following; measuring some or all km/h 24 than more not of speed travel — a rpm 500 4 than more not of speed motor — a Mpa 25 than more not of pressure — hydraulic tonnes metric 50 than more not of — mass ( of heading of vehicles 8427 use in the manufacture for V, 12 of voltage operation an — with — wrapped convoluted in tape or covered plastic tubing, — to be tin plated or equipped with connectors, terminals with 16 strands, with all or more ( task vehicles or utility of all-terrain use in the manufacture for harness of the steering system with an operating voltage 12 Wire V, equipped with connectors steering mounting vehicle for on a motor anchor clamps 3 plastic on both sides, having least at box Four-core connecting cable containing two connectors female for the transmission of digital kind USB manufacture used connector, of to a in the navigation and audio systems from signals of goods of Chapter 87 — of a voltage 5 V or more but not than 90 V, information transmitting of — capable ( of heading of vehicles 8711 use in the manufacture for Description wire harness of a voltage of 5V or more but not than 90 Multi-measurement V capable of harness: Wire harness: wire Multi-measurement 40 60 40 50 30 35 70 TARIC
CN code ex 8544 30 00 ex 8544 30 00 ex 8544 30 00 ex 8544 42 90 ex 8544 42 90 ex 8544 30 00 *ex 8544 30 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 306
Date foreseen for mandatory review
31.12.2020 31.12.2018 31.12.2020 Supplementary unit p/st p/st p/st
duty 0 % 0 % 0 % Rate of autonomous
)
2
1 mm, extension two-core cable with two connectors, containing at least: extension two-core cable grommet, rubber — a bracket attachment metal — a of a kind used to connect vehicle speed sensors of vehicles of Chapter in the manufacture 87 — 0,25 V) (± 1,25 V of voltage a — at one or both connectors fitted ends, one at least of which contains pins with a pitch of shielding, screening — outer and video processing OLED panel communication between LCD, PDP or for used solely electronic circuits — of a voltage not more than 80 V, cm, 120 than more not of length a — with connectors, with — fitted ( for use in the manufacture of hearing aids, accessory kits and speech processors Description of 600 transmission Mbit/s or more, with: cable capable of a bit rate transmission Data conductors: Electric 85 65 10 70 TARIC
CN code ex 8544 42 90 ex 8544 42 90 *ex 8544 30 00 *ex 8544 42 90 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 307
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2018 31.12.2020 31.12.2019 31.12.2020 Supplementary unit m m p/st — p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
2
)
2 0 % 0
)
2
)
2
)
2
— of a voltage 5 V, mm 300 than more not of length a — with ( for use in the manufacture of goods of Chapter 87 mm., 0,51 exceeding diameter a of wires conductor individual — with V, 000 1 than more not of voltage a — for ( for use in the manufacture of automotive cable harnesses — of a voltage not more than 80 V, platinum-iridium-alloy, a — of poly(tetrafluoroethylene), with — coated connectors, — without ( for use in the manufacture of hearing aids, implants and speech processors mm or of 20 diameter body hollow an external of a of cylindrical in the form metallised, ( more but mm, not for the manufacture of more than vacuum 250 interrupters Description 12-wire connecting cable containing two connectors two containing cable electrodes connecting cell 12-wire fuel wires: ( in electrical batteries layers copper zinc-carbon diffusion Insulated of gas manufacture for conductors: the used Electric in kind use a for of electrodes, paper Carbon fibre Carbon of aluminium oxide, % or more containing by ceramics, of weight 90 fitting Insulated 80 10 30 20 20 10 TARIC CN code ex 8544 42 90 ex 8544 49 91 ex 8544 49 93 ex 8545 19 00 ex 8545 90 ex 8547 10 00
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 308
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2021 31.12.2018 31.12.2018 Supplementary unit p/st p/st p/st p/st —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
more than 815 nm more than 40 more MHz contained in a housing and a capacitor, — diode a and laser a photodiode operating at a typical wavelength of 635 nm or more but not lens optical — an (PDIC) Circuit’ Integrated Photodetector ‘Recording — a actuator tracking and focussing — a — cells, solely consisting TFT glass or plastic of one or more facilities, screen touch with — combined — pixel addressing only, for electronics boards with control printed circuits with one or more and unit backlight without or — with inverters without or — with Description Spent lithium-ion or nickel metal hydride electric accumulators electric hydride metal nickel or lithium-ion Spent least sensor at image containing operating within a frequency range of 1,8 Unit, consisting of a resonator MHz or more but not Contact unit, Optical modules, LCD 10 41 43 48 65 TARIC
CN code ex 8548 90 ex 8548 90 ex 8548 90 ex 8548 90 *ex 8548 10 29 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 309
Date foreseen for mandatory review
31.12.2021 31.12.2019 31.12.2019 31.12.2021 31.12.2019 31.12.2020 Supplementary unit p/st p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
)
2
)
2
)
2
)
2 Plastic cover for filling the space between fog lights and the bumper whether or not with a for filling cover Plastic ( of goods for use in the manufacture of Chapter 87 chrome strip unit Motor powered brake actuation and V) 0,5 (± V 13,5 of rating a — with — a ball screw mechanism to control brake fluid pressure in the master cylinder ( for use in the motor vehicles manufacture of electric Body Parking Brake’) or with in Ramp’) of disc type brake in BIR or EPB (‘Ball (‘Electronic hydraulic function only, containing functional and mounting openings and guide grooves, of a kind of goods used in the manufacture of Chapter 87 Drum type parking brake: disk, brake service the within — operating mm — mm or more but not than 195 of 170 with a diameter ( for use in the manufacture of motor vehicles mounted for back plate to the band material steel Non-asbestos organic brake pads with friction ( of goods use in the manufacture of Chapter 87 jaw, of a kind of goods used in the manufacture iron brake caliper cast of Chapter 87 Ductile Description
10 20 60 40 50 60 70 10 10 30 10 20 40
TARIC
CN code ex 8708 30 10 ex 8708 30 91 ex 8708 10 10 ex 8708 30 10 ex 8708 30 10 ex 8708 30 10 ex 8708 30 10 ex 8708 30 99 ex 8708 10 90 ex 8708 30 91 ex 8708 30 91 ex 8708 30 91 ex 8708 30 91 ______
M8 M7 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 310
Date foreseen for mandatory review
31.12.2020 31.12.2022 31.12.2021 Supplementary unit p/st — —
duty 0 % 0 % 0 % Rate of autonomous
)
)
2
2
)
2
Automatic hydrodynamic gearbox converter, torque hydraulic a — with shaft, cardan and box transfer — without differential, front with not or — whether ( of motor vehicles Chapter 87 use in the manufacture for gears, eight least — at — an engine torque of 300 Nm or more, and installation longitudinal or — transverse ( of motor vehicles heading use in the manufacture 8703 for Gear box assembly with one or two inputs and at least three outputs in cast aluminium housing mm × 462 mm (width) than 455 not more of shafts) dimensions (excluding the overall with mm length, equipped (height), 680 with at least: shaft, output exterior-splined — one position, gear indicate to switch rotary — a differential a for potential — the ( task vehicles or utility of all-terrain use in the manufacture for Description Automatic gearbox with a hydraulic torque converter with: converter torque hydraulic a with gearbox Automatic 20 40 10 30 30 TARIC
CN code ex 8708 40 20 ex 8708 40 50 *ex 8708 40 20 *ex 8708 40 20 *ex 8708 40 50 ______
M7 M8 M7 M8 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 311
Date foreseen for mandatory review
31.12.2020 31.12.2020 31.12.2020 31.12.2021 Supplementary unit p/st p/st — p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
ended but with spline of 22 or more not more than 28 teeth teeth Car axle side-shaft fitted with a constant velocity joint at each end, a kind at of used with a constant velocity joint in the fitted axle side-shaft Car of goods manufacture of CN heading 8703 Transmission shaft in carbon plastics consisting fibre reinforced of a unique piece without any joint in the middle — of a length of 1 m or more but not than 2 m, kg — kg but not than 9 or more more of a weight 6 mm) aluminium housing, 1 in cast mm (± with overall Single input, dual (transmission) output gearcase mm) × 273 mm (± 1 mm) × 213 mm (± 1 dimensions not exceeding 148 comprising at least: — in one clutches cage, working one direction in both directions, two electro-magnetic ended mm), with spline of — mm (± 1 22, of 24 diameter an input shaft with outer — mm, a coaxial output mm or more but not more than 30 bushing of 22 with inner diameter ( task vehicles or utility of all-terrain use in the manufacture for containing insulator Upper strut and screws, mounting three with holder metal — a bump rubber — a a kind of of goods used in the manufacture of Chapter 87 Description
10 20 40 30 70 10 10 10 80 10
TARIC
CN code ex 8708 80 20 ex 8708 50 20 ex 8708 50 20 ex 8708 80 35 ex 8708 50 55 ex 8708 50 99 *ex 8708 50 20 *ex 8708 50 99 *ex 8708 99 10 *ex 8708 99 97 ______
M8 M7 M7 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 312
Date foreseen for mandatory review
31.12.2020 31.12.2020 31.12.2021 31.12.2019 31.12.2020 Supplementary unit p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
Rear chassis arm with a protective plastic label equipped Rear chassis arm with a protective plastic with two casings metal with pressed-in blocks, rubber silent of kind goods of used in the manufacture of Chapter 87 rubber silent equipped pivot chassis arm casing with a pressed-in and with a ball Rear metal block, of kind of goods used in the manufacture of Chapter 87 ( of goods of Chapter 87 kind manufacture a used the ribbed design of in a with using air compressed Aluminium cooler of goods of Chapter 87 to standard EN AC 42100 tank manufactured or outlet air with: Aluminium alloy inlet mm, 0,1Â than more not of flatness area insulating — an tank, per mg 0,3Â of quantity particle permissible — a — mm or more, between pores of 2 a distance and mm, 0,4Â than more not of sizes — pore — than 0,2Â mm not more than 3 pores larger of a kind used in heat exchangers for car cooling systems Description bar for front Stabilizer axle equipped with a ball pivot on both ends for use in the manufacture 20 30 20 30 10 20 10 30 10 TARIC
CN code ex 8708 80 20 ex 8708 80 20 ex 8708 91 20 ex 8708 91 20 ex 8708 80 91 ex 8708 80 91 ex 8708 91 35 ex 8708 91 99 ex 8708 80 99 ______
M7 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 313
Date foreseen for mandatory review
31.12.2019 31.12.2021 31.12.2021 Supplementary unit — — p/st
duty 0 % 0 % 0 % Rate of autonomous
)
2
)
2
Mechanically operated clutch for use with an elastomeric belt in a dry environment CVT belt use with an elastomeric for operated clutch Mechanically case: gear Transmission) (Continuously Variable mm, 23 diameter outer of shaft splined a onto bolted be to — designed mm), 1 (± mm 266 than more not of diameter overall an — with faces, tapered with sheaves 2 of — comprised each, degrees 13 of taper having — sheaves and sheaves, between displacement resist to used spring compression main a — having tension belt proper maintain to spring or cam a of — comprised ( task vehicles or utility vehicles of all-terrain use in the manufacture for force, dry environment in in a belt an elastomeric use with for clutch centrifugal operated Mechanically centrifugal way) this (in generate and a continuously (CVT), equipped transmission with: variable rotation given at clutch the activate that — elements — degree taper, ended with 5 or more but not than 6 shaft and weights, — 3 spring compression — 1 ( task vehicles or utility of all-terrain use in the manufacture for in aluminium housing gear with homokinetic hinges a kind Rack steering of used the manu in of goods facture of Chapter 87 Description
10 30 10 10 30 20
TARIC
CN code ex 8708 93 10 ex 8708 94 20 ex 8708 93 90 ex 8708 94 35 *ex 8708 93 10 *ex 8708 93 90 ______
M8 M7 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 314
Date foreseen for mandatory review
31.12.2020 31.12.2020 31.12.2020 31.12.2021 Supplementary unit p/st p/st — p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
load-regulated air bag load-regulated air sealing Inflatable safety cushion of high strength polyamide fibre — sewn forming thermal by fixed form, packing three-dimensional into — folded Inflatable safety cushion of high strength polyamide fibre: — sewn, — folded, — with three-dimensionally applied silicone bonding for air bag technology inflator cavity cool for forming — suitable and Front passenger airbag composed of: brackets, mounting six least at with housing metal — a cushion, safety embedded — an gas compressed with filled cartridge — a a kind of of goods used in the manufacture of Chapter 87 Six-layer composite fuel tank assembly comprising of: inlet, fuel — a (PFA), assembly flange pump — a — valve mounted on with rollover a ventilation the top of tank, and assembly, PFA for holes — threated ( task vehicles or utility of all-terrain use in the manufacture for Description
10 20 40 10 20 30 10 60
TARIC
CN code ex 8708 95 10 ex 8708 95 10 ex 8708 95 10 ex 8708 99 10 ex 8708 95 99 ex 8708 95 99 ex 8708 95 99 ex 8708 99 97 ______
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 315
Date foreseen for mandatory review
31.12.2021 31.12.2021 31.12.2022 31.12.2020 31.12.2020 Supplementary unit p/st p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2 0 % 0 )
2 m)
μ
m/– 5 m/– μ m (+ 15 μ
)
2 bonate, Front radiator holder whether or not with rubber cushioning of goods use in the manufacture Front radiator for ( of Chapter 87 with mounting or steel, holes, nuts, of iron Support whether or not with fixation bracket for ( of goods body connecting the gearbox use in the manufacture of Chapter 87 to the car for — (ABS), whether or not mixed with polycar a copolymer of acrylonitrile-butadiene-styrene chromium and nickel copper, of — layers ( of heading for motor vehicles 8701 use in the manufacturing of parts for to 8705 steel carbon SAE1541 — of 20 of layer chromium hard a — with — mm mm or more, but not than 1,5 more having thickness of 1,45 a wall % 15 of break at elongation an — having — perforated of a kind used for the production of motorcycle fork rods Description Electroplated interior or exterior parts consisting of: consisting parts exterior or interior Electroplated tubes, Inner ( of a kind Radiators used of attachments in motor bikes for fitting 30 40 15 25 85 10 20 TARIC CN code ex 8708 99 10 ex 8708 99 10 ex 8708 99 97 ex 8708 99 97 ex 8714 10 90 ex 8714 10 90 *ex 8708 99 97
M7 M8 M6 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 316
Date foreseen for mandatory review
31.12.2020 31.12.2021 31.12.2018 31.12.2018 31.12.2020 31.12.2018 31.12.2021 Supplementary unit — — — p/st — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous
0 % 0
0 % 0
)
2 0 % 0 )
2
)
2
)
2 — of 7050-t73 aluminium alloy, aluminium 7050-t73 — of surface, inner the on — anodised — than of not more 0,4 and with a mean roughness of the inner surface (Ra) — than of not more 4,0 a maximum roughness of the inner surface height (Rt) the use in manu for aluminium and aluminium or carbon fibres, constructed from Frame, ( facture of bicycles use in the of steel, for forks made entirely front Front forks, except rigid (non-telescopic) ( manufacture of bicycles core, methacrylate) poly(methyl — a polymer, fluorinated of cladding — a and mm, 3,0 than more not of diameter — a m, 150 than more of length — a of a kind used in the cables manufacture of polymer fibre Description Suspension damper tubes damper Suspension ( ( bicycles bicycles fibres of of optical manufacture manufacture of the the assembly in in an use use from for for up Pedals, posts, made with: Seat reverser fibre Image optical Polymer 23 33 25 35 70 72 50 10 30 10 30 TARIC
CN code ex 8714 91 30 ex 8714 91 30 ex 8714 91 10 ex 8714 91 10 ex 8714 91 30 ex 8714 10 90 ex 8714 91 10 ex 8714 96 10 ex 8714 99 90 ex 9001 10 90 ex 9001 10 90 ______
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 317
Date foreseen for mandatory review
31.12.2021 31.12.2022 31.12.2018 31.12.2022 31.12.2021 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2 Fibre optic plates: unpainted, and — uncoated — mm, mm or more, but not more than 234,5 of a length of 30 mm, — and mm or more, but not more than 28 of a width of 7 — mm mm or more, but not than 3 more of a height of 0,5 of a kind used in dental x-ray systems on both or covered on one side adhesive layer, an not with or whether material, by transparent sides with film a release or prism sheets, plates, whether or unprinted not diffuser possessing reflector Optical, diffuser, cut specifically polarising properties, eyeglass lens, finished on both Organic uncut corrective sides, to undergo a coating, colouring, of corrective manufacture edging, use in the mounting process for substantial or any other glasses ( a kind of finished eyeglass lenses used for the manufacture Description of side, one on finished consisting whether or not of a polarising film, on supported Material rolls, on one or both sides effect, corrective with lens eyeglass semi-finished uncut, organic Round 40 20 40 18 55 40 10 30 TARIC
CN code ex 9001 10 90 ex 9001 20 00 ex 9001 90 00 ex 9001 90 00 ex 9001 50 80 *ex 9001 50 41 *ex 9001 50 49 *ex 9001 20 00 ______
M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 318
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2019 31.12.2021 31.12.2020 Supplementary unit p/st p/st — — — —
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 and a prism
o m according to ASTM m, for use in the manu the use in m, for μ μ
)
2 0 % 0
)
2
m μ combination of infrared transmitting chalcogenide glass and another lens material chalcogenide glass and another lens transmitting combination of infrared with a pitch of not more than 0,65 filter coating and a contrast side ( facture of front projection screens 90 of angle prism a with resin acrylic of prisms side one on D2103, having pitch of 50 cut, not or — whether printed, not or — whether ( for use in the manufacture of backlight units screen TVs for flat Description Unmounted optical elements made from moulded infrared transmitting chalcogenide glass, or a or glass, chalcogenide transmitting ends infrared both moulded plate at from plastic polished made lenticular material, elements a (YAG) optical comprising garnet Unmounted 300 screen, yttrium-aluminium than projection neodymium-doped less of Rear of Rod thickness a with film methacrylate): terephthalate) a front including back reflector, a side structures, with a minimum of 5 multi-layer film Optical poly(methyl Poly(ethylene of made panel guide Light 25 35 45 65 70 85 TARIC
CN code ex 9001 90 00 ex 9001 90 00 ex 9001 90 00 ex 9001 90 00 ex 9001 90 00 *ex 9001 90 00 ______
M8 M6 M8 M6 M8 M6 M6 ▼ ▼ ▼ ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 319
Date foreseen for mandatory review
31.12.2018 31.12.2020 31.12.2022 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
)
2
)
2
m, μ
m or more but not than 5 more μ comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of lenses with glass or a diameter methacrylic comprising a combination of between 4 and 8 a one side with least coated on at mm, each lens than 180 but not more mm or more 120 ( of video projectors use in the manufacture for layer, magnesium fluoride Infrared lens with motorised focus adjustment, 3 of wavelengths — using — from 50 m to infinity, picture providing a clear — 3° × 2,25° and 9° × 6,75°, of vision sizes of fields with g, 230 than more not of weight a — with mm, 88 than more not of length a — with mm, 46 than more not of diameter a — with — athermalised, for use in the ( manufacture of thermal imaging cameras, infrared binoculars, weapons scopes — measuring not more than 80 mm × 55 mm × 50 mm, — with a resolution of 160 and or better, lines/mm times, 18 of ratio zoom a — with a kind of cameras used or live image for the production of visualizers Description mm and mm or more but not than 180 more Adjustable lens unit, having a focal length of 90 Lenses 15 10 10 20 TARIC
CN code ex 9002 11 00 ex 9002 11 00 ex 9002 19 00 *ex 9002 11 00 ______
M8 M6 ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 320
Date foreseen for mandatory review
31.12.2021 31.12.2021 31.12.2018 Supplementary unit — — —
duty 0 % 0 % 0 % Rate of autonomous
Infrared optical unit composed of mm) and — 0,1 mm (± of 84 lens with a diameter a monocrystalline silicon mm) — 0,05 mm (± 62 of a monocrystalline germanium lens with diameter assembled on a machined aluminum alloy support, of a kind used imaging cameras for thermal Infrared optical unit composed of and mm) — 0,05 mm (± of 29 with a diameter a silicon lens mm), — 0,05 mm (± of 26 lens with a diameter fluoride a monocrystalline calcium assembled on a machined aluminum alloy support, of kind a used imaging cameras for thermal mm, mm × 65 — mm × 65 than 125 measuring not more — with a resolution of 125 and or better, lines/mm times 16 of ratio zoom a — with a kind of cameras used or live image for the production of visualizers Description Lenses 25 35 20 30 40 TARIC
CN code ex 9002 11 00 ex 9002 11 00 ex 9002 19 00 ex 9002 19 00 *ex 9002 11 00 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 321
Date foreseen for mandatory review
31.12.2021 31.12.2018 31.12.2021 31.12.2021 31.12.2021 Supplementary unit — — — — —
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
190 mm Infrared optical unit mm), — 0,05 mm (± of 62 lens of a diameter with a silicon support alloy aluminum machined a on — mounted of a kind used cameras for thermal — mm, mm or more but not than 150 having length of 25 a focal than more but not mm or — of 60 diameter lenses, with a or plastic consisting of glass Infrared optical unit composed of mm), — 0,05 mm (± of 11 a germanium lens with diameter mm), and — 0,05 mm (± of 14 lens with a diameter fluoride a monocrystalline calcium mm), — 0,05 mm (± of 17 with a diameter a silicon lens assembled on a machined aluminum alloy support, of a kind used imaging cameras for thermal Infrared optical unit mm), — 0,1 mm (± of 26 lens with a diameter with a silicon support, alloy aluminum machined a on — mounted of a kind used imaging cameras for thermal Infrared optical unit composed of mm), — 0,05 mm (± of 19 a germanium lens with diameter mm), — 0,05 mm (± of 18 lens with a diameter fluoride a monocrystalline calcium Description unit: Lens 45 55 65 75 40 50 60 70 50 TARIC
CN code ex 9002 11 00 ex 9002 11 00 ex 9002 11 00 ex 9002 11 00 ex 9002 19 00 ex 9002 11 00 ex 9002 19 00 ex 9002 19 00 ex 9002 19 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 322
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2022 31.12.2019 31.12.2018 Supplementary unit — p/st p/st — p/st
duty 0 % 0 % 0 % 0 % 0 % Rate of autonomous
)
2
)
2
)
2 — a horizontal field of view range of 50 deg or more, but not more than 200 deg, — deg or more, but not more than 200 of view range 50 field a horizontal mm, — mm or more, but not more than 5,45 length of 1,16 a focal — of F/2,0 or more but not than F/2,6, and aperture a relative mm, — but mm or more not more than 18,5 of 5 a diameter ( for use in the manufacture of CMOS automotive cameras film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528 ( of F2.0 aperture of not more than of and mm, 33 for use in the a diameter manufacture relative ( charged-coupled (CCD) cameras mm, embedded plates between 2 mm or plastic more but not more than 1,15 of 0,85 diameter transmitting chalcogenide glass and another lens material — a germanium lens with a diameter of 20,6 mm (± 0,05 mm), — 0,05 mm (± of 20,6 a germanium lens with diameter assembled on a machined aluminum alloy support, of a kind used imaging cameras for thermal Description Lens assembly with: assembly Lens infrared of combination a or glass, protective plate and polarising membrane, a glass a transparent a plastic consisting of Filter, chalcogenide transmitting Lens, mounted, length of 3,8 having focal a fixed 0,19 mm (± or 8 mm) 0,4 mm (± mm), with a infrared from of lenses and with a unit, in the form comprising 1 Optical or 2 rows of optical glass fibres made lenses Mounted 85 10 20 30 40 TARIC
CN code ex 9002 20 00 ex 9002 90 00 ex 9002 90 00 *ex 9002 11 00 *ex 9002 90 00 ______
M8 M6 M8 M6 ▼ ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 323
Date foreseen for mandatory review
31.12.2019 31.12.2018 31.12.2018 Supplementary unit p/st p/st p/st
duty 0 % 0 % 0 % Rate of autonomous
technology, with mechanical components arranged in three-dimensional structures on the on structures three-dimensional in components arranged mechanical technology, with semiconductor material the on structures three-dimensional in components arranged mechanical technology, with semiconductor material, semiconductor technology, components in three-dimensional arranged with mechanical structures on the semiconductor material conductor boards, mainly consisting of a combination of: combination a consisting of conductor boards, mainly (ASIC), circuits integrated application-specific monolithic more or — one — one or more microelectromechanical mirrors (MEMS) manufactured with semiconductor of a kind used for incorporation into products of Chapters 84 to 90 and 95 for fully automated printed board circuit (PCB) assembly, with the following main components: — and (ASIC) circuits integrated a combination of one or more application-specific sensors (MEMS) manufactured with — one semiconductor or more micro-electromechanical 84-90 a kind in chapters and of of products used falling in the manufacture 94 — and (ASIC) circuits integrated a combination of one or more monolithic application-specific with manufactured (MEMS) elements sensor microelectromechanical more or one least — at Description Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of printing automatic the suitable for suitable SOIC) housing LGA, a CSWLP, in (e.g. micro-mirror housing semiconductor a Electronic in of sensor, consisting geomagnetic mainly a housing, as a compass, in Electronic sensor pressure semiconductor barometric Electronic 20 30 30 TARIC
CN code ex 9014 10 00 ex 9025 80 40 ex 9013 80 90 ______
M7 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 324
Date foreseen for mandatory review
31.12.2019 31.12.2019 31.12.2019 31.12.2018 Supplementary unit p/st — p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous
volatile organic compounds, containing: ductor technology, with mechanical components arranged in three-dimensional structures on ductor technology, structures components with mechanical in three-dimensional arranged the semiconductor material, — Atmospheric pressure, temperature, (also for temperature compensation), humidity, or — in a housing printing of conductor the automatic boards or Bare Die technology, suitable for (ASIC), circuits integrated application-specific monolithic more or — one semicon with manufactured (MEMS) elements sensor microelectromechanical more or — one housing in a metal element a zirconium-ceramic joining connector and mounting a with connecting cable housing to and attached plastic with holders of a kind goods of used in the manufacture of Chapter 87 Clustered instrument panel with the microprocessor control board, stepping motors and LED indicators showing at least: — speed, revolutions, — engine temperature, — engine level fuel — the of a kind CAN-BUS used the manufacture protocols, of communicating via in and K-LINE Chapter goods of 87 of a kind used for incorporation into products of Chapters 84-90 and 95 Description Speed sensor using the Hall effect for measuring wheels rotation in a motor vehicle equipped of vehicle consisting motor essentially a vehicles, in motor rotation in wheels two of the following semiconductor sensor for measuring at least quantities: Electronic analysis measuring smoke for or gas effect for Hall element the Sensor using sensor Speed 10 20 50 10 30 TARIC CN code ex 9029 20 31 ex 9025 80 40 ex 9027 10 90 ex 9029 10 00 ex 9029 90 00
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 325
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2022 31.12.2020 31.12.2018 31.12.2018 31.12.2021 Supplementary unit p/st p/st — p/st p/st p/st p/st
duty 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0
0 % 0
)
2 0 % 0
)
2
signals processes a voltage of 30 of 80 V, mOhm having contact resistance a typical comprising — analogue and digital and sending of receiving for suitable regulator, flow mass an electronic transducers, pressure — four valves, pressure more or — two and interfaces — electric lines gas for connectors — several plasma bonding suitable for in-situ processes or for multi frequency bond activating — ( manufacture of reclining car seats ( seats car reclining of mm used in the manufacture than 2,5 Description Electronic controller of electric power steering (EPS controller) (EPS steering power gases electric and of liquids controller controlling of 12 Automotive airbag shock-sensor, capable of switching A at a current comprising a contact Electronic for controller valve Digital and regulating working controlling of the gas Gas panel for technology, with flow rate, plasma disk Ratchet car seats of a kind of reclining used in the manufacture mm, used in the than 3,0 more but not mm or of 0,8 thickness with a Sidemember mm or more but not more seats with thickness of 1 mounting features bracket for safety Steel 20 30 40 50 10 20 30 TARIC
CN code ex 9032 89 00 ex 9032 89 00 ex 9032 89 00 ex 9401 90 80 ex 9401 90 80 ex 9401 90 80 *ex 9032 89 00 ______
M8 M6 M6 ▼ ▼ ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 326
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 31.12.2018 31.12.2020 31.12.2020 31.12.2020 31.12.2020 Supplementary unit p/st — p/st p/st p/st p/st — —
duty 0 % 0 % 0 % 0 % 0 % 0 % Rate of autonomous 0 % 0 )
2 0 % 0 )
2
)
2
)
2
)
2
and green LED chips, mistor car seats ( car seats lamination liner and without foam padding, reworking after (stitching of the leather and used of seats motor vehicles embroidery application) in manufacture mm or more but mm) not more than 600 1 mm (± mm), of a length of 420 0,2 mm (± of 3,0 ( of goods mm), for the manufacture of heading 8528 1 (± one but of 3 or engine chip red green and more not more than 9 blue light specific of a series diodes mounted emitting light on a PCB, flat and/or back with light coupled of the to the front TV set — an LED matrix module measuring 38,6 mm × 20,6 mm (± 0,1 mm), equipped with 128 red Ther Coefficient Temperature Negative a with equipped board, circuit printed flexible — a ( cable car scale models, Plastic whether or not with a motor, for printing ( use in base metal for the manufacture of zippers Description of adjustment mechanism used handles for controlling the seat in the manufacture of reclining Steel fasteners, slide bovine of lined with a headrest made of perforated a scrim-reinforced Outer part leather, of containing: parts silicone, a diameter tubes (RBG) of containing 3 fluorescent light assembly of synthetic material Electric other white and of pin/boxes Ambient light module with a length of 300 mm or more but not more than 600 mm, based on a array teeth, LED zipper mounted with tape narrow Sliders, ( mounted Narrow strips with plastic chain scoops use for in the manufacture of zippers 10 10 40 60 10 10 20 10 10 TARIC CN code ex 9503 00 75 ex 9401 90 80 ex 9401 90 80 ex 9405 40 35 ex 9405 40 39 ex 9405 40 39 ex 9503 00 95 ex 9607 20 10 ex 9607 20 90
M6 ▼ 02013R1387 — EN — 01.01.2018 — 008.001 — 327
Date foreseen for mandatory review
31.12.2018 31.12.2018 31.12.2018 Supplementary unit — — —
duty 0 % Rate of autonomous Parliament and of the Council Parliament laying down Unionthe Customs Code (OJ L 343, emical Substances) is an information tool managed by the European Commission, General customs/common/databases/ecics/index_en.htm of the European Parliament and of the CouncilEuropeanand of the of the 9 of Parliament October 2013 laying down the Union id down in Articles 55 and 56 of Commission 2015/2447 Implementing Regulationdown Articles id (EU) in of s.
0 % 0
0 % 0
◄ into a support (so called dye-sublimation) into a support (so called Description Felt tips and other porous-tips for markers, without internal canal internal without canal markers, internal for an porous-tips with other pen-tips and plastic tips Non-fibrous Felt colours, providing Ribbons of dyes with segments of different the penetration by of plastic heat
duty is suspended. The specific duty shall continue to apply. duty shall suspended. duty is specificThe ◄
10 20 10 TARIC ad valorem CN code ______
* A newly introduced measure or a measure with amended conditions. amended with measure a or measure introduced newly A * ex 9608 91 00 ex 9608 91 00 ex 9612 10 Customs Code (OJ Customs Code L 269, 10.10.2013,p. 1). 24 November 2015 laying down provisionsfor implementing certain of Regulationdetailed rules No 952/2013(EU) Europeanof the 29.12.2015, p. 558). Taxation and for Customs Directorate Union. More information can be found via the following link:http://ec.europa.eu/taxation_ M8 M8 ) However, the suspensionduties does not of tariff apply out undertakingwhere the processingor catering by carried is retail ) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU)No 952/2013 the ) Only ) of imports goods A surveillance suspensioncoveredby shallthis tariff be established in accordance with procedurethe la ) CUS (Customs UnionNumber) is assigned and to each ECICS Statistics record (product). ECICS (European Customs Inventory of Ch ) to the production The expression of new assembly’refers in an ‘industrialitems assembly plant or manufacturing plant.
1 2 3 4 5 6 ( ( ( ( ► ( ( ►
M6 ▼