WALRIDGE MOTORS LIMITED 23Rd ANNUAL SALE -CELEBRATING 33 YEARS in BUSINESS- SALE ENDS FEBRUARY 28TH , 2021 ALL PRICES in CANADIAN DOLLARS U.S

Total Page:16

File Type:pdf, Size:1020Kb

WALRIDGE MOTORS LIMITED 23Rd ANNUAL SALE -CELEBRATING 33 YEARS in BUSINESS- SALE ENDS FEBRUARY 28TH , 2021 ALL PRICES in CANADIAN DOLLARS U.S WALRIDGE.COM PH: (519) 227 4923 FAX: (519) 227 4720 E-MAIL:[email protected] WALRIDGE MOTORS LIMITED 23rd ANNUAL SALE -CELEBRATING 33 YEARS IN BUSINESS- SALE ENDS FEBRUARY 28TH , 2021 ALL PRICES IN CANADIAN DOLLARS U.S. CUSTOMERS PLEASE VISIT WWW.WALRIDGE.COM FOR CONVERSION RATE SPECIAL PRICES IN THIS FLYER ARE NET AND WILL NOT BE SUBJECT TO DISCOUNT SECTION 1 : ITEMS IN THIS SECTION CAN BE BACKORDERED AT SALE PRICE GENUINE AMAL PREMIER CARBS AMAL CONCENTRIC MK 1 DOWTY GAS TAP WASHERS GAS TANK FIXING KIT -Hard Anodized slides, GASKET & O-RING SET (1/2” ID) Norton Commando -Removable pilot jets, Part No: CGS900 Part No: 70-7351W Roadsters with steel tanks. -Stay up floats $4.05 each $1.25 each Price includes us setting for Reg $1.76 Part No: 06-7387 your bike, with or without Reg $5.40 $22.50 choke. Reg $25.00 STAINLESS STEEL AIR FILTER HOSE 30mm Right Hand ADAPTOR RINGS Part No: 930/300/1 GAS TAPS – (UK BEST QUALITY) Norton Commando, all models. 30mm Left Hand Type fitted to 1963 onwards Part No: 930/301/1 Triumphs, G/N15, P11, Part No: 03-3027S/S Commando’s, 71-72 A65’s etc $9.55 each BSA TANK BADGES $245.00 each Reg $10.84 Red/Gold pear-shaped. Reg $259.10 Main Part No: 83-2801 Part No: 40-8122/3 $28.30 $79.95 pair Reg $36.05 GENUINE AIR FILTER COMNNECTOR WASSELL EVOLUTION HOSES Reg $103.09 REPRODUCTION CARBS Reserve 1968-74 Commando -Hard Anodized slides, Part No: 83-2800 Part No: 06-2537G -Military spec ethanol $27.30 $9.95 each resistant floats, Reg $35.72 Reg $12.09 -Removable pilot jets MATCHLESS KNEE GRIPS BAP TAPS Part No: 01-0906/7 30mm Right Hand As fitted to 1979 onwards UK-MADE BEST QUALITY GAS CAPS Part No: 930/300W $35.00 pair Triumphs, will fit all the bikes Part No: 83-3875UK Reg $56.90 listed above. Compatible with $29.95 30mm Left Hand modern gas. Reg $39.95 Part No: 930/301W Main 850 Commando Carbs Part No: 60-7266 32mm Right Hand TRIUMPH TANK BADGES Part No: 932/35W GAS TANK SIDE PLAY RUBBERS Reserve Screws included. Part No: 60-7267 For BSA/Triumph oil-in-frame 1969 onwards models. 32mm Left Hand bikes. Part No: 932/36W $15.00 each Part No: 82-9700/1E Part No: 83-4931 $155.00 each Reg $24.83 $67.70 pair $3.95 each Reg $88.73 Reg $166.85 - Reg $5.50 $188.23 WALRIDGE.COM PH: (519) 227 4923 FAX: (519) 227 4720 E-MAIL:[email protected] KNEE GRIPS – NORTON ATLAS 750CC BIG BORE KIT FOR 650CC TAB WASHER SETS FOR TRIUMPH RUBBER SETS ETC TRIUMPH TWINS TWINS For footrests, kickstart & Part No: 22721/2 As fitted to 1970 T120T models 650 4-speed models. gear shift. $17.50 pair homologated for USA racing. Part No: 89-1046 Reg $24.08 Part No: PS215 650/750 5-Speed models. $550.00 Part No: 89-7076 Reg $619.20 $9.95 each Reg $11.80 CYLINDER HEAD FIXING KIT For Norton Commando. Oil-in-Frame Triumph GENUINE NORTON GASKET SETS Twins Regular Steel – as original Part No: RST140 Includes transmission gaskets and NORTON COMMANDO SUPERBLEND $21.50 Part No: 06-7097 all oil seals. $104.75 MAIN BEARINGS Reg $24.00 Reg $126.21 Part No: 06-4118 For Atlas, G/N15 and P11 $95.50 ea For Norton Commandos From serial no 114870 Part No: RSCOMM Stainless Steel Part No: 06-7926 Reg $118.32 Part No: 06-7097S/S $22.50 $67.60 Reg $24.00 $105.00 Reg $76.63 Reg $114.10 For BSA A50/65 1968-72 For 750 Commando Part No: RSA65 Part No: 06-0308G $18.55 $77.95 GENUINE RHP UK-MADE Reg $21.00 Reg $93.05 HIGH GEAR BEARING For Triumph 500 up to For 73-74 850 Commando For 4-speed models: 1974 & 650 Twins up to Part No: 06-5030G BSA A50/65/75, Norton & 1970 $82.25 Matchless with AMC Part No: RST100 Reg $93.57 transmissions (1957-75), $21.65 TRIUMPH T100 1957-74 HEAD 650 Triumph Twins & 750 Triples. Reg $27.00 BOLT SET For 850 Commando MK3 Part No: 06-8099G Part No: 60-3556UK Part No: 27749 $96.75 $59.95 QUALITY REAR SHOCKS $32.50 Reg $107.66 Reg $64.50 12.9” with Chrome Reg $35.42 Springs for 500/650 Triumph twins and 750 Triples Part No: SHK129C $107.50 pair OIL FILTER ELEMENTS Reg $112.35 For BSA/Triumph Triples SUPERBLEND LAYSHAFT BEARING 13.4” With Chrome Part No: 70-6571 Springs For BSA A50/65 $8.60 For Norton, Mathcless & AJS Part No: SHK134C BSA B25 PISTONS Reg $10.81 models 1957-77 with AMC $112.50 pair Transmission. Reg $120.31 With rings, pin & clips. For Norton Commando Part No: 06-7710S Part No: 06-3371G $32.40 13.4” Shrouded for BSA + .020” $12.95 Reg $41.46 A10/50/6, Norton/ Part No: 16945/020E Reg $13.96 Matchless G/N15CS & P11 Part No: SHK134E + .040” $112.50 pair Part No: 16945/040E Reg $120.22 $125.00 each Reg $135.00 MORGO PLUNGER OIL PUMP KICKSTART COTTER Superb quality, 15% more capacity than standard pump. For With nut and washer. 500, 650 & 750 Unit construction Fits numerous BSA & Triumph Triumph twins models. Part No: MOR04 Part No: 57-1222 $175.00 $2.95 Reg $237.47 Reg $3.48 WALRIDGE.COM PH: (519) 227 4923 FAX: (519) 227 4720 E-MAIL:[email protected] PASSENGER PEG ASSEMBLIES TRIUMPH BREATHER PIPES ODDIE STUDS CHROME HEADLIGHT BOLT With rubbers. CONTINUED For BSA A50/65 sidecovers. AND WASHER SET For 750 Twins 1973 on For Norton Commando – Short Type 5/16” X 26tpi – most bikes Part No: 83-4813 up to 1968. Also suits Atlas and many $14.50 Part No: 60-0982 Matchless/AJS machines Reg $18.47 $8.90 each Part No: 06-2006 Reg $10.03 Part No: 112201/CHR $27.50 $11.50 Clips for Pipe (4 required) Reg $27.09 Reg $36.24 Part No: 83-1615 Long Type $3.50 each Part No: 60-1006 Reg $5.66 $9.80 each Reg $12.06 Screws ODOMETER RE-SET CABLE Part No: 97-3894 For chronometric 95¢ ea instruments in nacelle. Reg $1.20 COMMANDO MUFFLER MOUNTING Part No: 61080 For Triumph Twins up to Nuts $6.15 1970 Part No: 04041 RUBBERS Reg $9.95 Part No: 82-9369 50¢ ea Very good quality, made in $19.95 Reg 85¢ Reg $34.87 England. SIDESTAND SPRING Part No: 06-0622E REPLICA INSTRUMENTS Matchless & AJS Models 1951-68, $3.75 each also N15CS Reg $4.62 (GREY FACES) ENGINE BOLT SET For 650 Triumph twins Part No: 01-0843 1967-69. To fit AJS & Matchless $9.50 350/500 engines into frame. Reg $19.88 STAINLESS STEEL SCREWS FOR Speedos: AMAL LEVERS MPH Part No: 61093 Part No: 26675 $25.95 As fitted to most bikes up to 1970. $99.95 Reg $36.82 Reg $120.06 TOOL BOX LID CHROME SCREW 9/16” Part No: 11/013S/S KPH Most Matchless & AJS Models, Part No: 26675K also N15CS. $4.95 each Reg $8.53 $99.95 Part No: 01-4511 Reg $117.38 $9.95 GENUINE RENOLD REAR CHAINS Reg $12.68 7/8” Part No: 11/014S/S Tachs: For 5/8 X 3/8 (530) Also work on T100 Part No: 110056/110 $4.95 each Reg $8.53 Part No: 26677 $83.10 $99.95 Reg $92.50 Reg $112.54 For 5/8 X 14 (520) Part No: 110054/110 REPLICA DOHERTY THROTTLE $95.00 SEAT RUBBER BUFFER SET Reg $ 114.24 For 7/8” bars, includes grips. Triumph 500/650 Models 1966-70 Part No: 16/364DE Part No: 26315 $20.50 $9.50 Reg $26.95 Reg $10.25 HALCYON BAR END MIRRORS Stainless Steel – best UK quality. TRIUMPH BREATHER PIPES Rectangular Head REPLICA AMAL 534 TYPE ALLY Part No: 820 1970 Onwards LEVERS, WITH ADJUSTERS $89.95 500 & 650 Twins P11 SWING ARM BUSHES Reg $94.69 Part No: 83-1614 4 Required For 7/8” bars. $14.50 Round Head Reg $18.03 Part No: 03-2184 For Clutch Part No: 830 $24.50 each Part No: 83029 $89.95 Reg $29.47 Reg $102.41 For Brake Part No: 83030 15.45 each Reg $19.36 WALRIDGE.COM PH: (519) 227 4923 FAX: (519) 227 4720 E-MAIL:[email protected] NEW PRODUCT! STEERING BEARINGS FIXING KIT FOR “P” CLAMPS FORK GAITERS TRIUMPH MIRRORS Most AJS & Matchless models & 10 pieces. Heavy duty best quality. Threaded 5/16 UNF to fit P11’s. Master Cylinder. Part No: 97-1529A Top Cone $12.50 Part No: HBM004 Part No: 01-2620 Reg $19.55 $29.15 $11.70 Reg $34.50 Reg $19.12 Cups (In Frame– 2 Required) Part No: 00-0805 $12.85 Reg $18.18 CHROME HANDLEBAR CLIPS STAINLESS STEEL OIL SEAL HOLDERS Lower Cone BSA A50/65 B44VS Fits many BSA models. Part No: 00-0806 P11 & Matchless G80CS. 1968-70 $15.05 Part No: 97-2513UK Part No: 97-2655 Reg $18.18 Part No: 02-8051S/S $24.50 $10.15 each $105.00 pair Reg $34.25 Reg $12.59 3/16 Ball Bearing (56 required) Reg $120.00 Part No: 00-0072 Triumph 500/650 1964-68 25¢ Part No: 97-1645HD Reg 56¢ $24.50 Reg $39.80 TRIUMPH TAPER BEARING SET Triumph 650 Twins, 750 Chrome Bolts For Clips Fits: Triples 1969-70 & 500 (4 required) 650 1963-70 FORK SEALS Twins 1969-74 Part No: 97-2656 500 1967-74 AJS & Matchless & P11 1955–68 Part No: 97-3635HD $2.95 each 750 69-70 Part No: 02-2699 $24.50 Reg $7.60 $9.95 each Reg $33.25 Part No: CS2000 Reg $14.83 $43.50 Reg $53.91 FORK BUSH AND OILSEAL SETS Norton- all models with BSA Models –Late A10, All Roadholder forks, A50/65 with BSA Forks, B44VS including Commando.
Recommended publications
  • 250 Triumph/BSA Rocker Arm Mods As a Professional Triumph
    250 Triumph/BSA Rocker Arm Mods As a professional Triumph mechanic during the early 1970’s, I remember the 250cc singles very well. These machines were built by BSA, with some being re-branded to Triumph. Models included the BSA B25 and Triumph T25. They were easy to work on and fun to ride because the engine would rev up effortlessly. However, they were highly susceptible to valve flotation and subsequent valve train damage. And since these engines performed so well at high RPM, loss of compression from valve damage was something we saw all the time. Damage Repair To repair this problem, the first step is to remove the cylinder head and both RH engine covers to inspect the entire valve train. The cam followers (tappets) should slide freely in the engine case over their full length without binding, and fall out from the fully-lifted position under their own weight. A bent cam follower will bind at its extreme lift point. Bent tappets must be replaced. The exhaust valve can easily be checked for leaking by holding the exhaust port straight up and watching the combustion chamber while pouring in thin solvents. A bent valve will let solvent gush by. A valve in good condition should hold solvent for at least 3 seconds. Photo 1. Stock rocker arms and the compression release lug Future Prevention After replacing valves and lifters you have repaired the damage, but not the cause. The real culprit is that the valve train weighs too much to sustain high RPM. You could install heavier valve springs, but that would simply wear out the cam and cam followers.
    [Show full text]
  • South of England Motorcycle Show Sunday 29Th October 2017 South of England Showground, Ardingly
    Free South of England Motorcycle Show Sunday 29th October 2017 South of England Showground, Ardingly Photo: Sharon Benton www.sharonbentonphotography.co.uk CCeelleebbrraattiinngg 5500 YYeeaarrss ooff tthhee WWiitthh SSppeecciiaall GGuueesstt PPeetteerr WWiilllliiaammss Don’t Miss the Fire Up Paddock at 10:30 & 1.30pm JPN Monocoque Commando; JPN Space-Frame Commando; genuine Thruxton Commando racer plus more! South of England Classic Show Results – April 2017 Best Pre 1950 Best Heavyweight (Over 250cc) 1st Mr Roy Wood, Essex. 1937 350cc 1st Richard Pettett, Kent. 1969 Honda Velocette KSS MKII. First time at this Show. CB750K0. First time at this Show. nd 2 Ivor Forward, East Sussex. 1941 2nd Mr D Ansell, East Sussex. 650cc Harley Davidson WLA. 1964 BSA A65R Best 1950 – 1959 st Best Lightweight (Under 251cc) 1 John Lelliott, West Sussex. 1959 500cc 1st Michael Touhey, 1958 48cc BSA Gold Star DBD34. nd Lambretta Moped. First time at this 2 Chris Barraclough, West Sussex. 1957 Show. Norton 19S. nd 2 Jim Rose, Berks. 1968 175cc BSA Best 1960 – 1969 Bantam Trials. st 1 Mark Eley, Kent. 1968 Norton 650cc Best British P11A. First time at this Show. st nd 1 Mr RA Webb, West Sussex. 1936 2 Keith Meadmore, West Sussex. 1960 500cc Matchless G80 Clubman. Matchless G12 CSR. nd 2 Chris Johns, Surrey. 1955/67 Dresda Best 1970 on Triton. First time at this Show. st 1 Patrick Bullimore, London. 1973 Best Overseas Kawasaki Z1. st nd 1 Michael Tourle, East Sussex. 1966 2 Colin Murrells, Kent. 1971 600cc BMW 250cc Aermacchi Ala Verde. First time R60/S.
    [Show full text]
  • Triumph Motorcycles Timeline the Glory Years, 1963-1972
    6/18/2021 Triumph Motorcycles Timeline: The Glory Years, 1963-1972 Triumph Motorcycles timeline 1963-1972: The Glory Years See bottom of page for links to other eras in Triumph's history New: Post your comments, opinions, and ask questions on my new FORUM. Tiger 90, high performance 350 3TA introduced, similar to T100S/S. All 650s, (including Bonnies, 1963 Tbirds, TR6, Trophy) are built with a new unit construction engine/gear box. Tina T10, 100cc scooter with automatic transmission introduced (designed by Turner). The US-only TR6SC, a pure desert racer with straight pipes, was produced: basically a single-carb T120, very fast. 650s all get new coil ignition. First year for T120 unit construction models. The Bonnie undergoes numerous and significant upgrades to its engine, gearbox, transmission and frame (after toying with a duplex design, Triumph instead made a larger diameter downtube to combat wobble and weave). A special TT model (T120C/TT) is produced until 1967 for the USA, due to the encouragement of Bill Johnson, of Johnson Motors ("Jo-Mo"). This is a stripped-down racing model, only made until 1966 for the US market. Two US dealers on a camping trip come up with the idea for the T20M Mountain Cub, combining Tiger Cub, Sports Cub and trials Cub parts. First sold in USA in 1964, proves very successful. BSA closes the Ariel factory at Selly Oak. The last Ariels in production, the Leader and Arrow, are manufactured at BSA's factory in Small Heath until 1965. Norton Atlas released. AMC acquires James. Norman ceases production.
    [Show full text]
  • Hepolite Motorcycle Valves & Guides
    AIR FILTERS carburation & fuel electrical WW90611 WW90612 Offset air filter for 376/600 carburettors 83-1609 Central air filter for 376/600 carburettors 82-7772 WW90613 WW90614 engine Offset air filter for 389/689 carburettors 82-6432 Central air filter for 389/689 carburettors 68-4633 WW90615 WW90616 Offset air filter for 900 carburettors 82-6432 Central air filter for 900 carburettors 60-1053 transmission suspension & frame WW90617 WW90651 Replacement paper element for pancake filters control Adaptor ring for offset air filter 376/600 - 71-2086 82-5694 WW90652 Adaptor ring for offset air filter 389/689 - 82-5958 WW90653 exhausts Adaptor ring for offset air filter 900 - 71-1860 seats & wheelhouse WW90618 Complete air filter for BSA and Triumph Triples 60-2567 WW90621 Replacement gauze element for BSA/Triumph Triples general WW90619 70-9138 Replacement gauze element for pancake filters 82-6866 OE cross ref & index WW90626 Air filter assembly AJS/Matchless G9/G11 1956 WW90638 02-2346 Domed air filter back plate WW90629 T120 1968-70 models Replacement gauze element for G9/G11 02-1818 email: [email protected] web: www.totalbikebits.com 83 AIR FILTERS & fuel carburation WW90620 WW90628 Replacement element for Triumph twins. Replacement element for Triumph twins with electrical Rectangular back plate with round hole rectangular hole in backplate 60-3618 60-4265 engine transmission WW90670 WW90625 Replacement element for Triumph Replacement element for Norton Commando 06-0673 twins with no backplate WW90643 & frame 60-3072 suspension
    [Show full text]
  • The Confederate Chapter Newsletter 2011
    The Confederate Chapter Newsletter The New Rusty Rebel In this Issue: 2011 - Spring Issue A Publication of the Confederate Chapter of The Colonel Speaks The Antique Motorcycle Club of America Letter from the Editor Las Vegas Auction—Results Bonhams & Mid America Did Elvis Ride Motorcycles? Farewell Bob Ward Remembering Raymond Dhue Members New Toys New Barber 2010 Format Next Survivor Series Well here it is February 15, 2011, Where does the time go. It is with great sadness that we say good-bye to one of our own, again. Bob Ward was a great Friend and Brother and he passed away doing what he loved the most. We will all miss your friendly, helpful, loving per- sonality. Till we meet again. The BIG ride 2010, which was a history making event, was the Scooter Ride, spearheaded by none other than ―Big Daddy‖ Ed Dacus. SO WE THOUGHT . What a great job and a GREAT ride. That was last April. But the REALLY BIG RIDE of 2010 was the November Scooter Ride. Thanks again to all the people involved and a special Colonel Bob thanks to Jeffie Dacus Ed’s Mother, Sherri Dacus, Les- lie Dacus Ed’s daughter-in-law. The Breakfast was OUT-OF-THIS-WORLD AGAIN. NOVEM- BER 13, 2010 turned out to be one of the coldest and rainiest days of the month. But the response was overwhelming. You may know 79 people attended the April event with 49 riders were rolling. The November event brought out 112 people and a total of 97 bikes, 50 of which braved the elements and actually rode the three stop shop tour laid out by Big Daddy and Shane Dorton.
    [Show full text]
  • Motorcycles Thursday 19 April 2012 10:00
    Motorcycles Thursday 19 April 2012 10:00 H&H Classic Car Auctions Whitegate Farm Hatton Lane Hatton WA4 4BZ H&H Classic Car Auctions (Motorcycles) Catalogue - Downloaded from UKAuctioneers.com Lot: 1 Lot: 14 2000 Easy Rider M50 Millenium Monkey Bike X571NYG 1964 AJS 31 CSR BTW677B A-85336 31CSR-X9672 Black 1000177 100058 Chrome Estimate: £2,500.00 - £3,500.00 Estimate: £300.00 - £500.00 Lot: 15 Lot: 2 1964 Norton Electra CPL918B 800 EL/800 Black / Silver 1915 Hobart Two-Stroke DS 9542 77466 6856 Black Estimate: £1,000.00 - £2,000.00 Estimate: £2,000.00 - £3,000.00 Lot: 16 Lot: 3 1971 BSA B50SS BPB 62K B50SS/KG01073 B50SS/KG01073 1970 Wassel Antelope Trials Q742GJA W891ST 7176878 Grey Purple / Black Estimate: £800.00 - £1,200.00 Estimate: £1,000.00 - £2,000.00 Lot: 4 Lot: 17 1926 Raleigh Model 14 CF 6876 7751 M1591 Black 1959 Royal Enfield Constellation XMR467A 6149 SMCA7636 Estimate: £2,500.00 - £3,500.00 Alloy / Red / Black Estimate: £3,000.00 - £4,000.00 Lot: 5 1959 Velocette Valiant TFO 796 2096 V200/1961 Black Lot: 18 Estimate: £2,500.00 - £3,500.00 1932 Sunbeam Lion YD 5374 12281 J6047 Black Estimate: £2,500.00 - £3,500.00 Lot: 6 1960s Ducati Monza Un-Reg DM250 96114 Red / Silver Lot: 19 Estimate: £1,000.00 - £2,000.00 1952 Vincent Comet Series C 374 XUU RC/1/10422/C F5AB/2A/8522 Red Estimate: £8,000.00 - £9,000.00 Lot: 7 1960 Norton ES2 997 GCV R14 88623 88623 R4 Green Estimate: £2,000.00 - £3,000.00 Lot: 20 1970 Triumph T120R Bonneville TTT645H CD43891T120R CD43891 Maroon Lot: 8 Estimate: £3,000.00 - £4,000.00 1958 BSA B33 YPX
    [Show full text]
  • Sales-Flyer-2017-Version-2.3.Pdf
    Walridge.com Ph (519) 227 4923 Fax (519) 227 4720 E-mail [email protected] Walridge Motors Limited 20th Annual Sale Sale ends December 31st, 2017 All prices in Canadian Dollars U.S. Customers please VISIT www.WALRIDGE.COM for conversion rate SPECIAL PRICES IN THIS FLYER ARE NET AND WILL NOT BE SUBJECT TO DISCOUNT SECTION 1 : ITEMS IN THIS SECTION CAN BE BACKORDERED at Sale price COMMANDO STAINLESS STEEL GENUINE AMAL VITON TIPPED BAP Taps: MORGO OIL PUMPS FOR AIR FILTER SURROUND LIGHTWEIGHT FLOAT NEEDLE UNIT CONSTRUCTION As fitted to 1979 onwards TRIUMPH TWINS For concentrics Triumphs . Compatible with (Not suitable for Monobloc) modern gas! (Will also fit all mod- Part No: 622/197AL Rotary Type (Double capac- els listed above) ity of regular pump) $7.95 each Main: Part No: MOR01 Reg. $8.93 Part No: 60-7266 $375.00 Part No: 06-0816S/S Reserve: Reg. $442.76 $31.95 Part No: 60-7267 Reg. $42.08 TRIUMPH GAS TANK BADGES $15.00 1969 ONWARDS MODELS WITH Reg. $22.57 Morgo Plunger Pump MK1 CONCENTRIC CARB SCREWS Part No: MOR04 GASKET AND O RING SET 1969 onwards models with screws $175.20 Part No: 82-9700/1E GENUINE COMMANDO (1968-74) AIR Reg. $237.47 $68.95pr FILTER HOSE Reg. $80.66 Part No: 06-2537G $7.95 Reg. $10.99 PRIMARY CHAINCASE GASKETS (ALL UK MADE) Part No: CGS900 $3.95 Reg. $4.91 G/N15 & P11 COMMANDO STAINLESS STEEL Gas Taps: SRM NORTON TWIN PRESSURE Part No: 02-5037 RELIEF VALVE AIR FILTER HOSE Adaptor Type fitted to Triumphs 1963 $4.25 ring Onwards, G/N15, P11, Norton Part No: 06-6195SRM Reg.
    [Show full text]
  • Instruction Booklet Cover.Indd
    KIT CONTENTS Transistor box RJ33 • Stator plate 0112980 • Magnetic rotor 0113030 • Fitting kit • Locking spanner These instructions are a general guide to fi tting the system to various machines which may have the ignition coils & battery mounted in different positions. It may be necessary to modify wire lengths to complete the installation. We strongly recommend that all connections are crimped/soldered to ensure satisfactory operation 12 VOLT IGNITION - TWIN CYLINDER MODELS POSITIVE OR NEGATIVE GROUND WITH POINTS IN THE SIDE CASING GENERAL DATA This unit can work with positive or negative earth as long as the coils are fed from a positive supply. The working voltage is 10-16 volts. The maximum current through the unit must not exceed 5 amps. For road applications two 12 volt coils in series are satisfactory and for race applications a double ended coil with primary resistance of 3-4.5 ohms will give best results. Any short circuit on the ignition coils will damage the unit. The coil current should drop to zero after 2 seconds without triggering. The resistance of the stator coils should be 73 ohms each and the magnetic rotor should have south poles facing outwards. This unit can be adapted for use on engines fi ring at 180 degrees camshaft or 360 crankshaft degrees. This unit will operate two coils to 10,000 sparks per minute. The typical working advance is 10 degrees at 2500RPM. This unit must be operated with the frame chasis acting as an electrical return, whether positive or negative polarity. If the engine is rubber mounted a good engine earth strap must be fi tted.
    [Show full text]
  • 2010 AHRMA Handbook Handbook
    2011 2010 AHRMA AHRMA Handbook Handbook RIDE ‘EM, DON’T HIDE ‘EM More than just a magazine, Motorcycle Classics provides a community where gearheads and classic bike fans gather to share their passion and enthusiasm for the power and beauty of the world’s greatest bikes. Every time you pick up an issue you’ll find: • Reliable reviews and evaluations of incredible motorcycles from around the world, from the greatest classic bikes of all time to the latest retro rides. • Profi les of the legendary riders who helped shape motorcycle culture into what it is today. • Inside information on the most incredible classic bike rallies and events, near and far. • Restoration tips and instructions, from minor tune-ups to major overhauls. • And much, much more! See us on the road: Road America Vintage Motorcycle Classic, June 11-12, 2011 Bonneville Vintage GP, Sept. 2-4, 2011 Barber Vintage Festival, Oct. 7-9, 2011 SUBSCRIBE ONLINE: Get 6 issues for only $24.95 www.MotorcycleClassics.com/EMCADBZ1 AHRMA.indd 1 11/16/2010 2:48:43 PM American Historic Racing Motorcycle Association, Ltd. AHRMA National Offices 309 Buffalo Run, Goodlettsville, TN 37072 615-420-6435, fax 615-420-6438 www.ahrma.org Printed December 2010 © 2011 AHRMA. All rights reserved. Battle of Twins®, Sound of Thunder®, Sound of Singles®, BEARS® and Battle of Legends® are registered trademarks of the American Historic Racing Motorcycle Association. ON THE COVER: How many different ways can you have fun on two wheels—old and new? Thanks to the following for supplying photos: Cheryl Boatman, Linda Doll Cluxton, Ron Pocher, Linda Richards and, Jeff, Sahms.
    [Show full text]
  • Catalog Download
    2018 I N D E X A Foot Change Rubber 72 Oil Seals 22-24 Valves (MAP Brand) II,3 A.C. Regulator 54 Foot Rests (custom) 80 Oil Tanks (MAP Brand) & Parts 76 Velocity Stacks 45-48,51 Acorn Nuts/Kits 2,14,25 Foot Rest Rubbers 72 Adjusters (Axle) 66 Foot Shift Levers 17 P W Air Filters, Elements & Parts 51-52 Fork Boots 69 Wheel Rims 82 Allen Screws & Kits 25,50 Fork Caps (heavy duty-MAP Brand) 68 Parts Catalogs (MAP Brand) 73 Wiring Diagram (Simple) 59 Alloy Point Covers 63 Fork Parts 69 Pazon Electronic Ignition Kits 53a-53b Wiring Harnesses & Leads 53,58,61 Alloy Pressure Plate NN Fork Seals 23,69 Petcocks 82 Wrist Pins (MAP Brand) GG,4 Alloy Tappet Adjusters OO Fork Springs 69 Pillion Pad 79 Wrist Pin Clips GG,4 Alternator parts 13,55 Forward Controls (MAP Brand) 80 Pinion Puller 75 Y Amal Carb/Parts 45-49 Frames & Hardtails 76 Pistons (cast) 4 Yuasa Batteries 60 Avon Tires 83 Fuel Line 62,76 Pistons (forged) (MAP Brand) EE-GG Year Chart 108 B Fuel Line Clamps 50 Piston, Caliper (stainless) 29 Baffles 36 Fuel Tank Sealant Plugs, Spark & Parts 58,60 Z Batteries 60 Fuse Holder w/Fuse 60 Point Covers, Finned (MAP Brand) 63 Zener Diode 55 Battery Box (MAP Brand) 77 Point Plates & Parts 8,58 Battery Eliminators 54 G Points 58 Bearings 7,66 Gas Cap 81 Policy 110-111 Bearings, Neck (MAP Brand) 69 Gas Line 62,76 Pressure Plate (Alloy) NN Belt Drive Primary(MAP Brand) CC-DD Gas Tank Mounting Hardware 27 Primary Belt Drives(MAP Brand)CC-DD Big Bore Kits AA-BB,NN Gas Tanks (Custom) 81 Primary Chain 12 Big End Bearings 7 Gaskets & Sets (MAP Brand) 18-22
    [Show full text]
  • BSA Motorcyklar 100 År – Del 1 Text & Bild: Johan Johansson Säkerhetscykeln ’ Otto Safety Bicycle’
    1880 tillverkade BSA sin första egna trampcykel, motorer med frammåtlutande motor och ramar för Text & bild: Johan Johansson BSA motorcyklar 100 år – Del 1 säkerhetscykeln ’ Otto Safety Bicycle’. Samma år fick upprättstående motorer upp till 3 ½ .1909 tog man man också sin logotyp, de välkända stackade gevären. beslut om att börja tillverka och försälja kompletta Men eftersom vapentillverkningen var huvudsaken motorcyklar. Man hade gjort någon provmaskin så lades cykeltillverkningen ned 1888 på grund av en tidigare med en importerad motor, men uppgifterna stor gevärsorder. 1892 började man med cykeldelar kring detta är mycket vaga och ofullständiga. och 1895 upphörde den igen då Boerkriget krävde Nu började man en noggrann utveckling av en mängder med vapen. Det tog ända till 1908 innan komplett maskin och efter 12 månaders utveckling cykeltillverkningen var igång igen. Man satte upp och noggranna utprovningar var man redo att visa en exportavdelning och BSA:s trampcyklar erövrade upp sin första motorcykel. Det var denna maskin kontinenten med sin höga kvalité. som premiärvisades på den första Olympia Show i London, oktober 1910. Detta var BSA:s första helt BSA:s varumärke, de stackade gevären. The egentillverkade motorcykel. Tanken var lackerad Gun and Garter, BSA:s i grönt och gult som många BSA-maskiner skulle Trade Mark. Den består av komma att bli efter denna. Motorn var på 499 cc I Svenska BSA Klubben vill vi i år särskilt fira att det bara Världens största motorcykeltillverkare utan tre ‘stackade’ gevär alltså och utvecklade 3,5 hk, borrning x slaglängd var är 100 år sedan BSA startade serieproduktion av också den största industrikoncernen i Storbritannien.
    [Show full text]
  • Norton Commando 1968-77 Part No
    Walridge Motors Limited: Ph: 519-227-4923; Fax: 519-227-4720; Email: [email protected]; Website www.walridge.com 1 2018 For Current Stock And Pricing See “Inventory Listing” On Our Home Page. Note -This Catalogue lists the approximately 4,000 most commonly ordered parts. In addition we carry and can obtain to special order well over 30,000 Part Numbers Walridge Motors Limited: Ph: 519-227-4923; Fax: 519-227-4720; Email: [email protected]; Website www.walridge.com 2 Spyder Integrated Technologies Vintage and Classic Motorcycle Specialty Rebuild and Restoration Over 45 years of comprehensive experience Magneto & Dynamo rebuilds and restoration Full Service – LUCAS, BTH and Miller authority SMITHS Chronometric & Magnetic Instruments Wheel building, truing and modifications In-house machine shop, welding & fabrication Dynamo and K2F Magneto Chronometric Instrument Chronometric Instrument MagDyno Complete Complete Restoration Restoration Restoration Restoration Norton Wheel with Custom Triumph TLS Brake Ottawa, Ontario, K1Y 4C1 (613) 729-1674 [email protected] Walridge Motors Limited: Ph: 519-227-4923; Fax: 519-227-4720; Email: [email protected]; Website www.walridge.com 3 Introduction Walridge Motors Limited, 33988 Denfield Rd RR2, Lucan, ON, N0M 2J0, Canada Ph: 519-227-4923; Fax: 519-227-4720; E-mail: [email protected]; Website: www.walridge.com MAIL ORDER ONLY—Personal callers by appointment PLEASE READ THIS FIRST This catalogue is not a substitute for original parts books These are inexpensive and absolutely essential for anyone working on a British Bike It is hard to believe that it has been 30 years since I opened this business. At that time a couple of my competitors had a conversation and agreed that we wouldn’t last and I’d soon get fed up with it.
    [Show full text]