1988-2013 R-Loc™ Product Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES
of helping you grow your business
1 ¼”
12”
36.00” COVERAGE
D C E RLOCGUIDE130701
OUR MISSION The men and women at Central States Manufacturing, Inc. would like to welcome you.
Central States Mfg., Inc. is an employee-owned company that is committed to excellence in the manufacturing and distribution of metal building products. We are dedicated to personal growth and to the well-being of each team member. We are also dedicated to increasing the value of our company.
We appreciate our customers. We are devoted to exceeding your expectations in the areas of value, customer service and quick response. It is our promise to maintain total honesty and integrity with every person our lives may touch.
Lowell, AR Michigan City, IN Cedar Hill, TX 800-356-2733 800-638-2565 800-210-8305 Mount Airy, NC Jasper, AL Hartford, SD 877-813-2111 866-270-6608 877-361-4763
CENTRAL STATES MANUFACTURING, INC. Effective 7/2013 • Information subject to change 3 INDEX Information in the catalog may vary by plant location. Please call your salesperson to verify product availability.
Product Information ...... 5 Delivery / Staging / Storage / Handling . . . . 6 Cutting / Drilling / Fastener Spacing ...... 7 Conversion Charts ...... 8 Square Conversions ...... 9 Section Properties ...... 10 Theoretical Allowable Live & Wind Loads . . . . 10 Trim ...... 11-16 Gutters ...... 17-19 Accessories ...... 20-23 Sub-Structural Steel ...... 24-29 Warranties ...... 30-31
Notice: The application and detail drawings in this manual are strictly for illustration purposes and may not be applicable to all building designs or product installations. Projects should conform to local building codes. Central States Manufacturing is not responsible for the performance of the material if it is not installed correctly.
Information contained in this booklet was in effect at the time of publication and is subject to change without notice.
CENTRAL STATES MANUFACTURING, INC. 4 Effective 7/2013 • Information subject to change R-LOC™ PRODUCT INFORMATION R-Loc™ is available in 26ga painted and bare galvalume. Central States uses the CentralGuard™ paint system on all Prime painted metals. Prime painted panels have a 40-year limited warranty and a 20-year galvalume substrate warranty. Bare (non-painted) metals from Central States will have an acrylic coating and a 25- year limited warranty. This acrylic coating helps protect the metal during manufacturing and installation. This clear organic treatment applied over the Galvalume coating is invisible, but provides enhanced performance applicability and retained heat reflectivity. There is no need for oils to be applied during forming. This organic treatment also eliminates fingerprinting and foot marking during installation. Kynar500®/Hylar 5000® paint system also available.
Central States' 26ga steel is manufactured to meet ASTM A792 specifications for galvalume with a minimum yield of 80,000 PSI. The R-Loc™ panel also has UL580, Class 90 with proper installation, UL2218/Class 4 impact resistance ratings and UL790 fire resistance.
The recommended minimum roof slope for the 1 1/4" R-Loc™ is a 1/2:12 pitch. This will allow for sufficient drainage of water. For added protection, a sealant tape can be used on the laps of the panel.
Purlin Bearing Leg
1 ¼”
12”
36.00” COVERAGE
CENTRAL STATES MANUFACTURING, INC. Effective 7/2013 • Information subject to change 5 DELIVERY Deliveries will be made using a 65' for any charges incurred if truck is tractor/trailer weighing approximately detained for any reason. The customer is 80,000 lbs. It is imperative that all responsible for unloading all trucks. Any delivery locations be accessible by a damage that occurs at this point is the vehicle of this size. Our drivers have customer’s responsibility. There must be the authority to refuse delivery to either equipment or at least 3 people to any location they see as unsafe or unload truck. inaccessible. The customer is responsible
CARE AND HANDLING STAGE Storage Galvalume steel sheets have a good Failure to follow these steps may result service life when exposed to normal in wet storage stains and premature weather conditions however, to protect rusting. The manufacturers warranty the appearance of panels and trims will be void at this time, and the from damage, there are a few simple manufacturer will not be responsible. precautions that can be taken. The steel sheets are subject to stain when water Handling sits upon, or becomes trapped between When unloading panels, extreme the sheets. If the galvalume sheets are caution must be employed. Care needs to be stored for any period of time, they to be used when unloading panels with should be stored only in a dry place, a forklift. Panel edges and underside preferably under a roof. Stand panels paint may become damaged if the on end and fan them out at the bottom forklift driver does not use caution. to provide air circulation and moisture Once at the jobsite, care must be taken run off. If space does not allow this, the in order to protect the painted surface. panels should be separated, blocked off When unbundling the panels, never drag of the floor at least 12 inches to allow them across the surface of one another. air flow, and stored at an incline to This may cause scratches across the encourage drainage. The panels should underneath panels. It is recommended then be covered, yet still have good that the panels be “rolled” off the top of air flow through the sheets to prevent the bundle to prevent scratching. Never condensation. Do not use a plastic cover, lift panels by the ends, instead lift the as this may cause the panels to sweat or panels longitudinally and carry vertically. condensation to occur. Panel edges are very sharp, therefore, safety equipment should be worn by all workers handling the material.
CENTRAL STATES MANUFACTURING, INC. 6 Effective 7/2013 • Information subject to change CARE AND HANDLING Cutting Drilling A portable field shear is the ideal Panels should not be drilled while method for cutting panels. Nibblers or a stacked. This will cause shavings that will power shear may also be used. Although become imbedded in the paint surface. we do not recommend it, if you decide to cut with a saw, it is very important that the panels be turned upside down Installation during cutting so that hot shavings do Follow instructions for UL580 Class 90. not come in contact with the paintedAt Intermediate Support surface. Make sure all adjacent panels are covered so that shavings are not imbedded in these panels. If metal shavings become imbedded in the paint surface, they will quickly rust. To 9 2 avoid this, panels should be thoroughly wiped of all filings on both sides of 1the panel. Failure to comply with the recommended cutting procedures releases the manufacturer of any responsibility. FASTENER SPACING At Eave or Endlap
Fastener Pattern at Eave and Endlap
1 At Intermediate Support Fastener Pattern at Interior of Panel
9 2 At Trim at Roof 1
CENTRAL STATES MANUFACTURING, INC. Effective 7/2013 • Information subject to change 7
1
At Eave or Endlap
1
At Trim at Roof
1 CONVERSION CHARTS
CENTRAL STATES MANUFACTURING, INC. 8 Effective 7/2013 • Information subject to change SQUARE CONVERSIONS For 26ga panels there are 2 formulas; one for panels measured in inches and one for panels measured in feet. While the actual panel width is 38.5", there will only be 36" of coverage per panel. Squares are figured based on actual width. One square is equal to a panel 31.169 feet long. One square of metal will give you approximately 94.5 square feet of coverage. One square is equal to 14,400 square inches. example 1: example 2: 38.5 (or width in inches) multiplied by length in inches length in feet multiplied by # of pieces multiplied by # of pieces divided by 14,400 divided by 31.169 Number of panels = 12 38.5" x 144" x 12 equals 4.62 squares of metal Number of panels = 12 12 x 12 equals 4.62 squares of metal Panel width = 38.5" 14,400 Panel width = 38.5" 31.169 Panel length = 144" Panel length = 12' Square inches = 14,400 Square inches = 14,400
Common Rafter Lengths (peak to sidewall)
Running Feet 1:12 Pitch 2:12 Pitch 3:12 Pitch 4:12 Pitch 5:12 Pitch 6:12 Pitch 1 1' 0" 1' 1/8" 1' 3/8" 1' 5/8" 1'1" 1' 1-3/8" 2 2' 1/8" 2' 3/8" 2' 3/4" 2' 1-1/4" 2'2" 2' 2-7/8" 3 3' 1/8" 3' 1/2" 3' 1-1/8" 3' 2" 3'3" 3' 4-1/4" 4 4' 1/8" 4' 5/8" 4' 1-1/2" 4' 2-5/8" 4'4" 4' 5/8" 5 5' 1/4" 5' 7/8" 5' 1-7/8" 5' 3-1/4" 5'5" 5' 7-1/8" 6 6' 1/4" 6' 1" 6' 2-1/4" 6' 3-7/8" 6'6" 6' 8-1/2" 7 7' 1/4" 7' 1-1/8" 7' 2-5/8" 7' 4-1/2" 7'7" 7' 9-7/8" 8 8' 3/8" 8' 1-3/8" 8'3" 8' 5-1/4" 8'8" 8' 11-3/8" 9 9' 3/8" 9' 1-1/2" 9' 3-3/8" 9' 5-7/8" 9'9" 10' 3/4" 10 10' 3/8" 10' 1-5/8" 10' 3-3/4" 10' 6-1/2" 10'10" 11' 2-1/8" 11 11' 1/2" 11' 1-7/8" 11' 4-1/8" 11' 7-1/8" 11'11" 12' 3-5/8" 12 12' 1/2" 12' 2" 12' 4-3/8" 12' 7-3/4" 13'0" 13' 5" 13 13' 1/2" 13' 2-1/8" 13' 4-3/4" 13' 8-1/2" 14'1" 14' 6-3/8" 14 14' 5/8" 14' 2-3/8" 14' 8-1/8" 14' 9-1/8" 15'2" 15' 7-7/8" 15 15' 5/8" 15' 2-1/2" 15' 5-1/2" 15' 9-3/4" 16'3" 16' 9-1/4" 16 16' 5/8" 16' 2-5/8" 16' 5-7/8" 16' 10-3/8" 17'4" 17' 10-5/8" 17 17' 5/8" 17' 2-7/8" 17' 6-1/4" 17' 11" 18'5" 19' 1/8" 18 18' 3/4" 18' 3" 18' 6-5/8" 18' 11-5/8" 19'6" 20' 1-1/2" 19 19' 3/4" 19' 3-1/8" 19' 7" 20' 3/8" 20'7" 21' 2-7/8" 20 20' 7/8" 20' 3-3/8" 20' 7-3/8" 21' 1" 21'8" 22' 4-3/8" 21 21' 7/8" 21' 3-1/2" 21' 7-3/4" 22' 1-5/8" 22'9" 23' 5-3/4" 22 22' 7/8" 22' 3-5/8" 22' 8-1/8" 23' 2-1/4" 23'10" 24' 7-1/8" 23 23' 1" 23' 3-3/4" 23' 8-1/2" 24' 3" 24'11" 25' 8-5/8" 24 24' 1" 24' 4" 24' 8-7/8" 25' 3-5/8" 26'0" 26' 10" 25 25' 1" 25' 4-1/8" 25' 9-1/4" 26' 4-1/4" 27'1" 27' 11-3/8" 26 26' 1-1/8" 26' 4-1/4" 26' 9-1/2" 27' 5" 28'2" 29' 3/4" 27 27' 1-1/8" 27' 4-1/2" 27' 9-7/8" 28' 5-5/8" 29'3" 30' 2-1/4" 28 28' 1-1/8" 28' 4-3/4" 28' 10-1/4" 29' 6-1/4" 30'4" 31' 3-3/4" 29 29' 1-1/4" 29' 4-7/8" 29' 10-5/8" 30' 6-7/8" 31'5" 32' 5-1/8" 30 30' 1-1/4" 30' 5" 30'11" 31' 7-1/2" 32'6" 33' 6-1/2" 31 31' 1-3/8" 31' 5-1/8" 31' 11-3/8" 32' 8-1/8" 33'7" 34' 7-7/8" 32 32' 1-3/8" 32' 5-1/4" 32' 11-3/4" 33' 8-3/4" 34'8" 35' 9-1/4 33 33' 1-1/2" 33' 5-1/2" 34' 1/8" 34' 9-3/8" 35'9" 36' 10-3/4" 34 34' 1-1/2" 34' 5-3/4" 35' 1/2" 35' 10" 36'10" 38' 1/4" 35 35' 1-1/2" 35' 5-7/8" 36' 7/8" 36' 10-5/8" 37'11" 39' 1-5/8""
CENTRAL STATES MANUFACTURING, INC. Effective 7/2013 • Information subject to change 9 SECTION PROPERTIES 36" WIDE, CSMI R-LOc™ panel Gauge Thickness Weight Yield Stress Top in Compression Bottom in Compression (inches) (psf) (ksi) (Positive Bending) (Negative Bending) Ixx Sxx Ma Ixx Sxx Ma in4/ft in3/ft in.kips/ft in4/ft in3/ft in.kips/ft 26 0.0185 0.881 80.0 0.0400 0.0406 1.4590 0.0373 0.0497 1.7847 Section properties and allowables are calculated in accordance with 1996 AISI Specifications and 1999 AISI Supplement No. 1. I +/- is for deflection determination. S +/- is for bending determination. Ma is allowable bending moment. All values are for one foot of panel width. These loads are for panel strength. Frames, purlins, fasteners and all supports must be designed to resist all loads imposed on the panel. Allowable outward loads based on stress have been increased by 33.33% for wind uplift. Allowable loads for deflection are based on deflection limitation of span/180 or span/240. For roof panels, self weight of the panel has to be deducted from the allowable inward load to arrive at the actual "live load" carrying capacity of the panel. Minimum bearing length must be checked. Minimum deliverable bare steel thickness should not be less than 0.95 of design thickness. THEORETICAL ALLOWABLE LIVE & WIND LOADS SINGLE SPAN CONDITION 26 Gauge & 80 ksi Span (feet) LL (S)(psf) LL (D) L/180(psf) LL (D) L/240(psf) WL(psf) 3 108.1 108.1 97.1 175.8 3.5 79.4 79.4 61.2 129.2 4 60.8 54.6 41.0 98.9 4.5 48.0 38.4 28.8 78.1 5 38.9 28.0 21.0 63.3 6 27.0 16.2 12.1 44.0 7 19.9 10.2 7.6 32.3 8 15.2 6.8 5.1 24.7 TWO SPAN CONDITION 26 Gauge & 80 ksi Span (feet) LL (S)(psf) LL (D) L/180(psf) LL (D) L/240(psf) WL(psf) 3 132.2 132.2 126.5 143.7 3.5 97.1 97.1 79.6 105.6 4 74.4 71.1 53.3 80.9 4.5 58.8 50.0 37.5 63.9 5 47.6 36.4 27.3 51.7 6 33.0 21.1 15.8 35.9 7 24.3 13.3 10.0 26.4 8 18.6 8.9 6.7 20.2 THREE OR MORE SPAN CONDITION 26 Gauge & 80 ksi Span (feet) LL (S)(psf) LL (D) L/180(psf) LL (D) L/240(psf) WL(psf) 3 154.4 154.4 154.4 167.9 3.5 113.5 113.5 113.5 123.4 4 86.9 86.9 77.3 94.5 4.5 68.6 68.6 54.3 74.6 5 55.6 52.8 39.6 60.5 6 38.6 30.5 22.9 42.0 7 28.4 19.2 14.4 30.8 8 21.7 12.9 9.7 23.6 Theoretical allowable loads are based on uniform span lengths. LL (S) is allowable live load based on stress limitation. LL (D) is allowable live load based on deflection limitation of L/180 or L/240. WL is allowable wind load and has been increased by 33.33%.
CENTRAL STATES MANUFACTURING, INC. 10 Effective 7/2013 • Information subject to change Orders for trims other than 10'2" in length must be in by 9:00am the day of your cutoff. All angles are 90° or 45° unless otherwise noted. R-LOC TRIMS All trims are 26 gauge unless otherwise specified. Part Number Length
HE036(color) 3'6" HEAD TRIM HE063(color) 6'3" Orders for trims other than 10'2" in length must be in by 9:00am R-LOC TRIMSHE073(color)the day of your cutoff. 7'3" All angles are 90° or 45° unless otherwise noted. HE083(color)All trims are 26 gauge 8'3" unless otherwise specified. HE102(color) 10'2" HE103(color)Part Number 10'3" Length HE123(color) 12'3" HE143(color) 14'3" PEAK BOX FOR BOX RAKE & HE163(color) 16'3" PEAK BOX FIXED FOR BOX RAKE HE183(color)PBBV(color) 18'3" 3'
HE204(color)PBBF(color) 20'4" 3' specify pitch
JAMB TRIM JA072(color) 7'2" JA102(color) 10'2" JA122(color) 12'2" JA142(color) 14'2" JA162(color) 16'2" FORMED RIDGE45° CAP JA182(color) 18'2" JA204(color)FRC36(color) 20'4" 3'0" specify pitch up to 6:12 BASE TRIM BA102(color) 10'2" BA122(color) 12'2" BA142(color) 14'2" 3 18'' BA162(color) 16'2" BA182(color) 18'2" BA204(color) 20'4" 135° ™ SKYLIGHT TRIM R-LOC TRIMS ZEE TRIM SK102(color) 10'2" ZE102(color) 10'2" SK122(color)Orders for trims other than12'2" 10'2" in length must be in by 9:00am Orders forZE122(color) trims otherSK142(color) than 10'2" in length12'2" must14'2" be in 9:00 am the day of your cutoff. All angles are 90° or 45° unlessthe day otherwise of your cutoff.noted. AllAll trimsangles are are 26 90° gauge or 45° unless unless otherwise otherwise specified. noted. R-LOC125° 125°TRIMSZE142(color)SK162(color) 14'2" 16'2" ZE162(color)All trims are 26 gauge16'2" unless otherwise specified. 125° 125° SK182(color) 18'2" ZE182(color) 18'2" ZE204(color)PartPartSK204(color) # Number 20'4" 20'4"Length Length Notes UNIVERSALEXTENDED VA RIDGELLEY CAP UN102(color) 10'2" PEAK BOX FOR BOX RAKE & EVA102(color) 10'2" UNIVERSAL RIDGE CAP UN102(color) 10'2" PEAK BOX FIXED FORPainted BOX RAKE UN122(color)EV A122(color) 12'2"12'2" specify pitch side PBBV(color) 3' UN122(color)EVA142(color) 12'2" 14'2" UN142(color)UN142(color)PBBF(color) 14'2" 3' 14'2" specify pitch EVA162(color) 16'2" UN162(color)UN162(color) 16'2" 16'2"specify pitch additional pallet charge EVA182(color) 18'2" specify pitch Roof pitch UN182(color) 18'2" There will be an will apply UN204(color)UN182(color)EVA204(color) 20'4" 20'4"18'2" additional pallet charge There will be an R-LOC TRIMS90° GIRTH 24" UN204(color) 20'4" additional pallet charge HOUSE RAKE TRIM - OrdersR-LO forC trims other than 10'2" in lengthHRAR102(color) must be in by 9:00am the day10'2" of your cutoff. All angles are 90° or 45° unless otherwise noted.FRC36(color) All trims are 26 gauge unless otherwise3'0" specified. FFOOCOMMERCIALRMEDRMED RIDGE RIDGE5 CAPVALLEY CAP HRAR122(color) 12'2" 45° HRAR142(color)VA102(color) 14'2" 10'2" R-LOC TRIMS Painted Part NumberFRC36(color) Length 3'0" side HRAR162(color)VA122(color) 16'2" 12'2" Orders for135° trims other than 410'2" in length must be in by 9:00am the day of your cutoff. All angles are 90° or 45° unless otherwise HRAR182(color) noted. All trims are 26 gauge unless18'2" otherwise specified. specify pitch up to 6:12 RAKE TRIM VA142(color) 14'2" specify pitch up to 6:12 HRAR204(color)VA162(color) 20'4" 16'2" RA102(color)Part Number Length10'2" specify pitch RA122(color)VA182(color) 12'2" 18'2" 105° 135° 135° VA204(color) 20'4" RAKE TRIM3 18'' RA142(color) 14'2" There will be an
150° 90° RA162(color)RA102(color) 10'2"16'2" additional pallet charge RA182(color)RA122(color) 12'2"18'2" 105°105° 135° 135° RA142(color) 14'2" FLATSKYLIGHTFLA T SHEETS SHEETS TRIM RA204(color)FS102(color) 20'4" 10'2" 150° RA162(color)FS102(color) 16'2" 10'2" RA182(color)FS122(color)SK102(color) 18'2" 10'2"12'2" 105° FS122(color) 12'2" BOX RAKE TRIM RA204(color)SK122(color) 20'4" 12'2" BRT102(color)FS142(color)FS142(color) 10'2" 14'2"14'2" additional pallet charge SK142(color) 14'2" 125° 125° BRT122(color)FS162(color) 12'2" 16'2" will apply 135° 135° FS162(color)SK162(color) 16'2"16'2" BOX RAKE TRIM BRT142(color)FS182(color) 14'2" 18'2" 125° 125° BRT102(color)SK182(color) 10'2" 18'2" BRT162(color)FS182(color)FS204(color) 16'2" 20'4"18'2" BRT122(color)SK204(color) 12'2" 20'4" 135° 135° BR T182(color) 18'2" There will be an BRT142(color)FS204(color) 14'2" 20'4" 41 9/16" BRT204(color) 20'4" EX TENDED VA LLEY BRT162(color) 16'2" additional pallet charge EVA102(color) 10'2" BRT182(color) 18'2" EVA122(color) 12'2" HHI-SIDE I-SIDE EA VE EAVE TRIM TRIM BRT204(color)HI102(color) 20'4" 10'2" EVA142(color) 14'2" HI102(color) 10'2" HI122(color)EVA162(color) 16'2"12'2" HI-SIDE EAVE 105°TRIM HI122(color) 12'2" Painted roof pitch HI142(color)EVA182(color) 18'2"14'2" specify pitch side HI142(color)HI102(color) 10'2"14'2" specify pitch 150° EVA204(color) 20'4" 105° HI162(color)HI122(color)HI162(color) 12'2"16'2" 16'2" There will be an roof90° pitch HI182(color)HI142(color) 14'2"18'2" 105° HI182(color) 18'2" additional pallet charge 150° HI204(color)HI162(color) 16'2"20'4"
GIRTH 20.75" HI182(color)HI204(color) 18'2" 20'4"specify pitch COMMERCIAL 105° VALLEY HI204(color) 20'4" VA102(color) 10'2" SHSH OROT RTEA VE EAVE TRIM TRIM SEA102(color) 10'2"specify pitch VA122(color) 12'2" SEA102(color)SEA122(color) 10'2" 12'2" SHOR T EAVE TRIM SEA122(color) VA142(color) 12'2" 14'2" Painted SEA142(color)SEA102(color)SEA142(color)VA162(color) 10'2"14'2" 16'2"14'2" side specify pitch specify pitch roof pitch SEA162(color)SEA122(color)SEA162(color)VA182(color) 12'2"16'2" 18'2"16'2" SEA142(color) 14'2" SEA182(color)VA204(color) 18'2" 20'4" There will be an roof pitch SEA182(color) 18'2" 135° SEA204(color)SEA162(color) 16'2"20'4" 90° SEA182(color) 18'2" specify pitcadditionalh pallet charge GIRTH 9.5" SEA204(color) 20'4" 135° SEA204(color) 20'4" LFLAONG T EASHEETS VE TRIM specify pitch L ONG EAVE TRIM LEA102(color)LEA102(color)FS102(color) 10'2" 10'2"10'2" LONG EAVE TRIM LEA122(color) FS122(color) 12'2" 12'2" roof pitch LEA102(color)LEA122(color) 10'2" 12'2" LEA142(color)FS142(color) 14'2" 14'2" Painted LEA122(color) 12'2" roof pitch LEA162(color)LEA142(color) 16'2" 14'2" side LEA142(color)FS162(color) 14'2" 16'2" specify pitch LEA182(color)LEA162(color) 18'2" 16'2" LEA162(color)FS182(color) 16'2" 18'2" 135° LEA204(color) 20'4" LEA182(color)FS204(color) 18'2" 20'4" LEA182(color) 18'2"specify pitch 135° LEA204(color) 20'4" LEA204(color) 20'4"specify pitchThere will be an OUTSIDE CORNE R 41 9/16"GIRTH 9.5" additional pallet charge OUTSIDE CO RNER OU102(color) 10'2" OU122(color) 12'2" 135° 135° OU102(color) 10'2" OU142(color)OU122(color) 12'2"14'2" 135° 135° CENTRALOU162(color)OU142(color) STATES MANUFACTURING,14'2"16'2" INC. Effective 7/2013 • Information subject to change 11 135° OU182(color)OU162(color) 16'2"18'2"
135° OU204(color)OU182(color) 18'2"20'4" 135° OU204(color) 20'4" 135° Orders for trims other than 10'2" in length must be in by 9:00am the day of your cutoff. All angles are 90° or 45° unless otherwise noted. R-LOC TRIMS AllOrders trims forare trims26 gauge other unless than 10'2"otherwise in length specified. must be in by 9:00am the day of your cutoff. All angles are 90° or 45° unless otherwise noted. R-LOC TRIMS Orders for trims other than 10'2" in length must be in by 9:00am Part AllNumberOrders trims arefor 26trims gauge other unless thanLength otherwise10'2" in length specified. must be in by 9:00am the Ordersdaythe ofday foryour of trims yourcutoff. other cutoff. All than anglesAll 10'2" angles are in 90°arelength 90°or 45° mustor 45° unless be unless in otherwiseby otherwise9:00am noted noted. . R-LOCR-LOC TRIMS TRIMS™ PartAll thetrims Number day are of 26your gauge cutoff. unless All Lengthanglesotherwise are 90°specified. or 45° unless otherwise noted. R-LOCINSIDER-LOC CORNE R TRIMS TRIMS All trims are 26 gauge unless otherwise specified. All trims are 26 gauge unless otherwise specified. INSIDE CORNE135° R PartPart Number Number LengthLength 135° OrdersIN102(color) forPart trims Number other than 10'2" in10'2" lengthLength must be in 9:00 am the day of your cutoff. 135° IN122(color) 12'2" INSIDEINSIDE CORNE CORRNER135°All angles are 90°IN102(color) or 45° unless otherwise noted.10'2" All trims are 26 gauge unless otherwise specified. INSIDE CORNER IN142(color) 14'2" 135° 135° IN122(color) 12'2" 135°135° 135° IN102(color)IN162(color)IN142(color)IN102(color) 16'2"10'2"14'2"10'2" 135° IN102(color) 10'2" 135° IN122(color)IN182(color)IN122(color) 18'2"12'2"12'2" IN162(color)IN122(color)Part # 16'2"12'2" Length Notes IN142(color)IN204(color)IN142(color) 20'4"14'2"14'2" 135°135° IN182(color) 18'2" IN142(color) 14'2" SIDEWALL TRIM IN162(color)IN204(color)IN162(color)SI102(color) 16'2"20'4"16'2" 10'2" 135° IN162(color) 16'2" 135° IN182(color)IN182(color) 18'2"18'2" 135°SIDEWALL TRIM IN182(color) 18'2" 135° IN204(color)IN204(color)SI122(color) 20'4"20'4" 12'2" SIDEW135° 135°ALL TRIM SI102(color)IN204(color) 10'2"20'4" 135° Painted SI142(color) 14'2" side SI122(color)SI102(color) 12'2"10'2" SIDEWALL TRIM specify degree of bend SIDEW SIDEWALL ALL TRIM TRIM SI142(color)SI122(color)SI162(color) 14'2"12'2" 16'2" SI162(color)SI102(color) 16'2"10'2" SI102(color)SI142(color)SI102(color) 10'2"14'2"10'2" SI182(color)SI122(color)SI182(color) 18'2"12'2" 18'2" SI122(color)SI162(color)SI122(color) 12'2"16'2"12'2" GIRTH 9" SI204(color)SI142(color) 20'4"14'2" specify degree of bend SI142(color)SI182(color)SI142(color)SI204(color) 14'2"18'2"14'2" 20'4" SI204(color)SI162(color) 20'4"16'2" specify degree of bend SI162(color)SI162(color) 16'2"16'2" SI182(color) 18'2" TRANSITION TRIM SI182(color) SI182(color) 18'2"18'2" TRANSITI O N TRIM SI204(color)TR102(color) 20'4" 10'2"specify degree of bend TRANSITION TRIM SI204(color)TR102(color) SI204(color) 10'2"20'4"20'4" specifyspecify degree degree of of bend bend TR122(color)TR122(color) 12'2" 12'2" TR102(color) 10'2" TRANSITIONPainted TRIM TR142(color)TR122(color) 14'2"12'2" TRANSITIONTRANSITION TRIMside TRIM TR142(color) 14'2" TR162(color)TR142(color)TR102(color) 16'2"14'2"10'2" TR102(color)TR102(color) 10'2"10'2" 135° TR182(color)TR162(color)TR122(color)TR162(color) 18'2"16'2"12'2" 16'2" TR122(color)TR122(color) 12'2"12'2" 135° TR204(color)TR182(color)TR142(color) 20'4"18'2"14'2" 135° TR142(color)TR182(color) 14'2" 18'2" TR142(color) TR162(color) 14'2"16'2" 135° TR204(color)TR162(color) 20'4"16'2" TR162(color)TR182(color) 16'2"18'2" GIRTH 11.75" 135° TR204(color) 20'4" TIE IN TRIM 135° TR182(color) 18'2" 135°135° TR182(color)TR204(color) 18'2"20'4" 135° TI102(color)TR204(color) 10'2"20'4" TIE IN TRIM 135° TR204(color) 20'4" TI122(color) TI102(color) 12'2" 10'2" TIE IN TRIM TI102(color) 10'2" TIE IN TRIM TI142(color)TI122(color) 14'2"12'2" TIE IN TRIMRoof pitch TI122(color) 12'2" TIE IN TRIM TI162(color)TI102(color) 16'2"10'2" TI142(color)TI102(color) 14'2"10'2" Painted Roof pitch TI102(color)TI182(color)TI122(color)TI142(color) 18'2"10'2"12'2" 14'2" side TI162(color)TI122(color) 16'2"12'2" specify pitch TI122(color)TI204(color)TI182(color)TI142(color) 20'4"12'2"18'2"14'2" Roof pitch TI142(color)TI162(color) 14'2" 16'2" Roof pitch TI142(color) TI204(color)TI162(color) 14'2"20'4"16'2" specify pitch Roof pitch TI162(color) 16'2" TI162(color)TI182(color)TI182(color) 16'2"18'2" 18'2" TI182(color) 18'2" specify pitch HIGH SIDE PARAPET TRIM TI182(color)TI204(color) 18'2"20'4" GIRTH 10.375" TI204(color)TI204(color) 20'4" 20'4" HIGH SIDE P ARAPET TRIM HSP102(color) 10'2" specify pitch TI204(color) 20'4" specify pitch HSP122(color)HSP102(color) 12'2" 10'2" specify pitch HIGH SIDE PARAPET TRIM HSP142(color) 14'2" HIGHHIGH SIDERoof P pitchARAPET PARAPET TRIM TRIMHSP122(color)HSP102(color) 12'2" 10'2" HSP162(color)HSP142(color)HSP102(color) 16'2"14'2"10'2" HIGH SIDE PARAPETRoof pitch TRIM HSP102(color) 10'2" HSP182(color)HSP122(color)HSP122(color) 18'2"12'2" 12'2" HSP102(color)HHSP122(color)SP162(color) 10'2"16'2"12'2" Painted HSP204(color)HSP182(color)HSP142(color) 20'4"18'2"14'2" Roof pitch HSP122(color)HSP142(color)HSP142(color) 12'2"14'2" 14'2" side Roof pitch HSP162(color) 16'2" specify pitch specify pitch HSP142(color)HSP204(color)HSP162(color) 14'2"20'4"16'2" Roof pitch HSP182(color)HSP162(color) 18'2" 16'2" HSP162(color)HSP182(color) 16'2"18'2" specify pitch COMMERCIAL RAT GUARD HSP204(color) 20'4" HSP182(color)HSP204(color)HSP182(color) 18'2"20'4" 18'2" specify pitch COMMERCIAL RAT GUARD HSP204(color) 20'4" specify pitch GIRTH 10.5" RG102(color)HSP204(color) 10'2" 20'4" COMMERCIAL RA T GUARD RG122(color) 12'2" specify pitch COMMERCIAL RAT GUARD RG102(color) 10'2" 55° RG142(color)RG122(color) 14'2"12'2" COMMERCIALCO MMERCIAL RAT GUARD RAT GU ARD RG102(color) 10'2" 55° RG162(color)RG142(color)RG102(color) 16'2"14'2"10'2" RG102(color) 10'2" RG182(color)RG162(color)RG122(color)RG122(color) 18'2"16'2"12'2" 12'2" 55° RG102(color)RG122(color) 10'2"12'2" 135° RG204(color)RG182(color)RG142(color) 20'4"18'2"14'2" 55° RG142(color)RG142(color) 14'2" 14'2" RG122(color)RG162(color) 12'2"16'2" 135° Painted RG204(color)RG162(color) 20'4"16'2" 55° side RG142(color)RG182(color)RG162(color) 14'2"18'2" 16'2" RG182(color) 18'2" 135° RG162(color)RG204(color) 16'2"20'4" 135° RG182(color)RG204(color)RG182(color) 18'2"20'4" 18'2" 135° GIRTH 8.3125" RG204(color)RG204(color) 20'4" 20'4"
BASE TRIM BA102(color) 10'2" Painted BA122(color) 12'2" side BA142(color) 14'2" BA162(color) 16'2" BA182(color) 18'2" BA204(color) 20'4" GIRTH 6.125"
CENTRAL STATES MANUFACTURING, INC. 12 Effective 7/2013 • Information subject to change Orders for trims other than 10'2" in length must be in by 9:00am the day of your cutoff. All angles are 90° or 45° unless otherwise noted. R-LOC TRIMS All trims are 26 gauge unless otherwise specified. Part Number Length
HE036(color) 3'6" HEAD TRIM HE063(color) 6'3"
HE073(color) 7'3" HE083(color) 8'3" HE102(color) 10'2" HE103(color) 10'3" HE123(color) 12'3" HE143(color) 14'3"
HE163(color) 16'3"
HE183(color) 18'3"
HE204(color) 20'4"
JAMB TRIM JA072(color) 7'2" JA102(color) 10'2" JA122(color) 12'2" JA142(color) 14'2" JA162(color) 16'2" 45° JA182(color) 18'2" ™ JA204(color) 20'4" R-LOC TRIMS
BASE TRIM Orders BA102(color) for trims other than 10'2"10'2" in length must be in 9:00 am the day of your cutoff. All angles BA122(color) are 90° or 45° unless otherwise12'2" noted. All trims are 26 gauge unless otherwise specified. BA142(color) 14'2" BA162(color) 16'2" BA182(color)P art # 18'2" Length Notes BA204(color) 20'4" 135° ZEE TRIM ZE102(color) 10'2" ZEE TRIM ZE102(color) ZE122(color) 10'2" 12'2" Painted ZE122(color) ZE142(color) 12'2" 14'2" side ZE142(color) 14'2" ZE162(color) ZE162(color) 16'2" 16'2" ZE182(color) ZE182(color) 18'2" 18'2" ZE204(color) 20'4" GIRTH 5.875" ZE204(color) 20'4"
UNIVERSAL RIDGE CAP UN102(color) 10'2" WAINSCOT TRIM WA102(color) 10'2" UN122(color) 12'2" UN142(color)WA122(color) 14'2" 12'2" UN162(color) 16'2" specify pitch Roof pitch UN182(color)WA142(color) 18'2" There will14'2" be an Painted UN204(color) 20'4" additional pallet charge side WA162(color) 16'2" HOUSE RAKE TRIM - OrdersWA182(color) for trims other than 10'2" in length must18'2" be in by 9:00am HRAR102(color)the day of your cutoff.10'2" All angles are 90° or 45° unless otherwise noted. R-LOCR-LOC TRIMSGIRTH 7.75" WA204(color) 20'4" 5 HRAR122(color)All trims are 26 gauge12'2" unless otherwise specified. 45° HRAR142(color) Orders for trims14'2" other than 10'2" in length must be in by 9:00am HRAR162(color) the day of your 16'2"cutoff. All angles are 90° or 45° unless otherwise noted. 135° Part NumberHE036(color) Length 3'6" R-LOCHEAD TRIM 4TRIMS All trims are 26 gauge unless otherwise specified. HRAR182(color) 18'2" HE036(color)HE063(color) 3'6" 6'3" HEAD TRIM HRAR204(color) 20'4" Painted HE063(color)Part Number 6'3" Length side HE073(color) 7'3" HE073(color) 7'3" HE036(color) 3'6" HEAD TRIM HE083(color)HE083(color) 8'3" 8'3" HE063(color) 6'3" HE102(color)HE102(color) 10'2" 10'2" HE103(color)HE073(color) 10'3" 7'3" HE123(color)HE083(color)HE103(color) 12'3" 8'3" 10'3" HE143(color)HE102(color) 14'3" 10'2" GIRTH 5.75" HE123(color) 12'3" HE163(color)HE103(color) 16'3" 10'3"
HE183(color)HE123(color)HE143(color) 18'3" 12'3" 14'3"
HE143(color) 14'3" HE204(color)HE163(color) 20'4" 16'3" HE163(color) 16'3" HE183(color) 18'3" JAMB TRIM JA072(color)HE183(color) 7'2" 18'3"
JA102(color)HE204(color)HE204(color) 10'2" 20'4" 20'4" JA122(color) 12'2"
JA142(color) 14'2" JAMBJAMB TRIM TRIM JA072(color)JA072(color) 7'2" 7'2" JA162(color)JA102(color) 16'2" 10'2" 45° JA182(color)JA102(color) Orders for trims other18'2" than 10'2" in 10'2"length must be in by 9:00am JA122(color)the day of your cutoff. All12'2" angles are 90° or 45° unless otherwise noted. R-LOC TRIMSJA204(color)JA142(color)JA122(color) All trims are 26 gauge20'4" unless14'2" otherwise 12'2" specified. Painted JA162(color) 16'2" side BASE TRIM 45° BA102(color)JA142(color)Part Number 10'2" Length14'2" JA182(color) 18'2" WAINSCOT TRIM BA122(color) JA204(color) JA162(color) 12'2" 20'4" 16'2" BA142(color)WA102(color) 14'2" 10'2" GIRTH 5.75" BA162(color) JA182(color)WA 122(color) 16'2" 12'2" 18'2" BASE TRIM BA102(color) 10'2" BA182(color) WA 142(color) 18'2" 14'2" BA122(color)JA202(color) 12'2" 20'4" BA204(color) WA 162(color) 20'4" 16'2" 135° BA142(color)WA 182(color) 14'2"18'2" 135° BA162(color) 16'2" WA204(color) 20'4" ZEEJAMB TRIM HEADER BA182(color)JH102(color) 18'2" 10'2" ZE102(color) 10'2" JAMB HEADER BA204(color)JH122(color) 20'4" 12'2" 135° ZE122(color) 12'2" JH102(color) 10'2" ZE142(color)JH142(color) 14'2" 14'2" Painted JH122(color) 12'2" ZE162(color) 16'2" ZEEside TRIM JH162(color)JH142(color) 14'2" 16'2" ZE182(color)ZE102(color) 18'2" 10'2" JH162(color) 16'2" ZE204(color)ZE122(color)JH182(color) 20'4" 12'2" 18'2" JH182(color) 18'2" ZE142(color) 14'2" GIRTH 13" JH204(color)JH204(color) 20'4" 20'4" ZE162(color) 16'2" UNIVERSAL RIDGE CAP UN102(color)ZE182(color) 10'2" 18'2" OUTSIDE CORNER BOX UN122(color)ZE204(color) 12'2" 20'4" UN142(color) OCB(color) 14'2" UN162(color) 16'2" specify pitch There will be an UNIVERSAL Roof pitchRIDGE CAP UN182(color)CENTRALUN102(color) STATES 18'2" MANUFACTURING,10'2" INC. 13 UN204(color) Effective20'4" 7/2013 • Information additional pallet subject charge to change UN122(color) 12'2" INSIDE CO RNER BOX UN142(color) 14'2" HOUSE RAKE TRIM - UN162(color) 16'2" specify pitch HRAR102(color) 10'2" R-LO C Roof pitch UN182(color)ICB(color) 18'2" There will be an HRAR122(color) 12'2" 5 UN204(color) 20'4" additional pallet charge 45° HRAR142(color) 14'2" HRAR162(color) 16'2" 135° 4 HOUSE RAKE TRIM - HRAR182(color) 18'2" HRAR102(color) 10'2" R-LOCRAKE TRIM END CAP HRAR204(color) 20'4" 5 HRAR122(color)REND(color) 12'2" 45° 105° HRAR142(color) 14'2" HRAR162(color) 16'2" 135° 4 left-hand shown 150° HRAR182(color) 18'2" HRAR204(color) 20'4" 105°
BOX RAKE TRIM END CAP 1 2 BREND(color)
left-hand shown
63 4
2
PEAK BOX FOR STANDARD RAKE PBOXF(color) 2'6'' PBOXV(color) 3' specify pitch
PBOXF-FIXED PBOXV-VARIABLE Orders for trims other than 10'2" in length must be in by 9:00am the day of your cutoff. All angles are 90° or 45° unless otherwise noted. R-LOC TRIMS All trims are 26 gauge unless otherwise specified.
Part Number Length WAINSCOT TRIM WA102(color) 10'2" WA122(color) 12'2" WA142(color) Orders for trims14'2" other than 10'2" in length must be in by 9:00am the day of your cutoff. All angles are 90° or 45° unless otherwise noted. R-LOC TRIMS WA162(color)Orders for trims other16'2" than 10'2" in length must be in by 9:00am WA182(color)the All day trims of yourare 26 cutoff.18'2" gauge All unless angles otherwise are 90° or specified. 45° unless otherwise noted. R-LOC 135° TRIMS All trims are 26 gauge unless otherwise specified. WA204(color)Part Number 20'4" Length Part Number Length JAMBWA HEADEINSCOTR TRIM ™ R-LOC TRIMSJH102(color) 10'2" WAINSCOT TRIM WA102(color) 10'2" R-LOC TRIMS JH122(colorWAWA102(color))122(color) 12'2" 10'2"12'2" Orders for trims other than 10'2" Orders in length forJH142(color trims must other be) in than by 9:00am 10'2" in the length14'2" day mustof your be cutoff. in 9:00 am the day of your cutoff. WAWA122(color)142(color) 12'2"14'2" All angles are 90° or 45° All unless angles otherwise are 90° JH162(color or noted. 45° unless )All trims otherwise are 26 noted.gauge16'2" unless All trims otherwise are 26 gauge specified. unless otherwise specified. WAWA142(color)162(color) 14'2"16'2" JH182(colorWAOrders162(color)) for trims other18'2" than 16'2"10'2" in length must be in by 9:00am PartWAthe Number182(color) day of your cutoff. AllLength angles18'2" are 90° or 45° unless otherwise noted. R-LOC 135° TRIMS JH204(color) 20'4" 135° WA182(color) 18'2" PartWAAll 204(color)# trims are 26 gauge unless otherwise20'4"L ength specified. Notes WA204(color) 20'4" RAKEOUTSIDE TRIM CORNER BOX RAKEJAMB TRIM HEADER PartRA102(color) Number Length10'2" JAMB HEADE R OCB(color) RA102(color) 10'2" JH102(color) 10'2" RA122(color)RA122(color)JH102(color ) 12'2"10'2" 12'2" HEAD TRIM 105° 135° 135° HE036(color) JH122(color ) 3'6"12'2" use PBOXF below for Painted RA142(color)RA142(color)JH122(color ) 14'2"12'2" 14'2" side HE063(color)JH142(color ) 6'3"14'2" R-LOC 150° TRIMS RA162(color)JH142(color ) 16'2"14'2" correct peak box Orders for trims other than 10'2" in length mustHE073(color)RA162(color)JH162(color be in by 9:00am) the day of7'3" your16'2"16'2" cutoff. INSIDE CORNER BOX RA182(color)JH162(color ) 18'2"16'2" All angles are 90° or105° 45° unless otherwise noted.HE083(color)JH182(color All trims ) are 26 gauge unless 8'3"18'2" otherwise specified. RA204(color)RA182(color)JH182(color ) 20'4"18'2" 18'2" ICB(color)HE102(color)JH204(color ) 10'2"20'4" JH204(color ) 20'4" GIRTH 20.75" PartHE103(color)RA204(color) Number 10'3"Length 20'4" HE123(color) 12'3" BOXOUTSIDE OUTSIDERAKE TRIM CORNER BOBOXX RAKE TRIM BRHE143(color)REND(color)T102(color) 10'2"14'3" RAKE TRIM END CAP OCOCB(color)B(color) RAKE TRIM END CAP RA102(color)BRHE163(color)T122(color) 12'2"16'3"10'2" 135° 135° REND(color)RA122(color)BRHE183(color)T142(color) 14'2"18'3"12'2" 105° left-hand 105° 135° 135° BRHE204(color)T162(color) 16'2"20'4" left-hand shown show n RA142(color) 14'2" 150°150° BRT182(color) 18'2" INSIDEINSIDE CO RNER BOX RA162(color) 16'2" JAMB TRIM BRJA072(color)T204(color) 20'4" 7'2" RA182(color) 18'2" 105° JA102(color) 10'2" 105° RA204(color) 20'4" JA122(color)ICB(color)ICB(color) 12'2"
HI-SIDE EAVE TRIM JA142(color) 14'2"
BOX RAKE TRIM END CAP HI102(color)JA162(color) 10'2"16'2" 1 BOX B RAKEOX RAKE TRIM2 TRIM45° BREND(color)BRT102(color) 10'2" 105° BRHI122(color)JA182(color) T102(color) 12'2"18'2"10'2" RAKE TRIM roofEND pitch CAP BRT122(color) 12'2" RAKE TRIMleft-hand END CAPshown BRHI142(color)JA204(color)T122(color) 14'2"20'4"12'2" 135° 135° 150° REND(color) use PBBF below for 63 4 Painted HI162(color)BRT142(color)REND(color) 16'2" 14'2" 105° side BR T142(color) 14'2" BASE TRIM 105° HI182(color)BA102(color) 18'2"10'2" correct peak box 105° left-hand showBR BRT162(color)T162(color)n 16'2"16'2" left-hand showHI204(color)BA122(color)n 20'4"12'2" 2 150° BR T182(color) 18'2" 150° BA142(color)BRT182(color) 14'2" 18'2" specify pitch BR T204(color) 20'4" BA162(color)BRT204(color) 16'2" 20'4" PEAK BOX FO105°R STANDARDGIRTH 20.75" RAKE SHORT EAVE TRIM105° BA182(color) 18'2" PBOXF(color) 2'6'' HI-SIDE EAVE TRIM BA204(color) 20'4" BOX RAKE TRIM END135° CAPPBOXV(color)SEA102(color)BREND(color) 3' 10'2" BOX RAKE TRIM END CAP HI102(color)SEA122(color) 12'2"10'2" specify pitch BOX RAKE 1 2 TRIM END CAP SEA142(color)BREND(color) 14'2" 1105° HI122(color) 12'2" ZEE TRIMPBOXF-FIXED 2 BREND(color) roof pitch roof pitch PBOX V-VASEA162(color)RIABLZE102(color)E 16'2"10'2" left-hand shown HI142(color) 14'2" 150° left-hand SEA182(color)ZE122(color) 18'2"12'2" 63 4 left-handshown shown HI162(color) 16'2" 135° 3 SEA204(color)ZE142(color) 20'4"14'2" 6 4 HI182(color) 18'2" specify pitch 105° ZE162(color) 16'2" HI204(color)ZE182(color) 18'2"20'4" 2 LONG EAVE TRIM specify pitch 2 ZE204(color) 20'4" LEA102(color) 10'2" PEAK BOX FOR STANDARD RAKE SHORT EAVE TRIMroof pitch LEA122(color) 12'2" PEAKUNIVERSALPEAK B BOXOX RIDGE FO R ST CAPANDARD RAKE PBOXF(color)PBOXF(color) 2'6' ' 2'6" for Rake Trim SEA102(color)LEA142(color)UN102(color) 14'2"10'2"10'2" LEA162(color)UN122(color)PBBF(color)PBOXV(color)PBOXF(color) 16'2"12'2"3' 2'6'3'' for Box Rake Trim SEA122(color) 12'2" specify pitch LEA182(color)UN142(color)PBOXV(color) 18'2"14'2"3' SEA142(color) 14'2" specify pitchspecify pitch 135° LEA204(color)UN162(color) 20'4"16'2" roof pitchPBOXF-FIXED SEA162(color) 16'2" Roof pitch UN182(color) 18'2" specifyThere will pitc beh an PBOX V-VARIABL E specify pitch PBOXF-FIXED SEA182(color)UN204(color) 20'4"18'2" additional pallet charge PBOX V-VARIABL E 135°OUTSIDE CO RNER SEA204(color) 20'4" OU102(color) 10'2" specify pitch HHOUSEOU SE RAKE RAKE TRIM TRIM - HRAR102(color) 10'2" 135° OU122(color)HRAR102(color) 12'2"10'2" R-LOC 135° HRAR122(color) 12'2" LONG EAVE TRIM 5 Painted OU142(color)HRAR122(color) 14'2"12'2" 45° side LEA102(color)OU162(color)HRAR142(color)HRAR142(color) 16'2"14'2"10'2"14'2" 135° OU182(color)HRAR162(color) 18'2"16'2" 135° roof pitch 4 LEA122(color)HRAR162(color) 12'2"16'2" OU204(color) 20'4" LEA142(color)HRAR182(color)HRAR182(color) 18'2"14'2"18'2" 135° LEA162(color)HRAR204(color) 20'4"16'2" HRAR204(color) 20'4" LEA182(color) 18'2"
135° LEA204(color) 20'4" GIRTH 12.5" specify pitch OUTSIDE CORNER CENTRAL STATES MANUFACTURING, INC. 14 EffectiveOU102(color) 7/2013 • Information subject10'2" to change OU122(color) 12'2" 135° 135° OU142(color) 14'2" OU162(color) 16'2"
135° OU182(color) 18'2" OU204(color) 20'4" 135° OrdersOrders for for trims trims other other than than 10'2" 10'2" in length in length must must be in be by in 9:00a by 9:00am m thethe day day of of your your cutoff. cutoff. All All angles angles are are90° 90°or 45° or 45°unless unless otherwise otherwise noted noted. . R-LOCR-LOC TRIMS All trims are 26 gauge unless otherwise specified. All trims are 26 gauge unless otherwise specified. PartPart Number Number LengthLength ™ INSIDE ANGLE 2X2 R-LOC TRIMS INSIDE ANGLE 2X2 IA2102(color) 10'2" IA2102(color) 10'2" IA2122(color) 12'2" Orders for trimsIA2122(color) other than 10'2" in length must be in12'2" 9:00 am the day of your cutoff. All angles are 90° orIA2142(color) 45° unlessOrders otherwise for trims noted.other than All 10'2"trims14'2" inare length 26 gauge must be unless in by otherwise9:00am specified. IA2142(color)Ordersthe day for of trimsyour cutoff.other than All angles10'2" in are14'2" length 90° or must 45° beunless in by otherwise 9:00am noted. R-LOC TRIMSIA2162(color)OrdersAll trims for are trims 26 gaugeother thanunless 10'2" otherwise16'2" in length specified. must be in by 9:00am IA2162(color)the day of your cutoff. All angles are16'2" 90° or 45° unless otherwise noted. R-LOC TRIMSIA2182(color)Part #All trims are 26 gauge unless otherwise18'2"Length specified. Notes IA2182(color)PartAll Number trims are 26 gauge unless Length otherwise18'2" specified. IA2204(color)IA2102(color)Part Number Length20'4"10'2" INSIDEINSIDE ANGLE ANGLE 2X2 2X2 IA2204(color)Part Number Length20'4" INSIDE ANGLE 2X2 IA2122(color)IA2102(color) 10'2" 12'2" INSIDE ANGLE 2X2 IA2122(color) 12'2" INSIDE ANGLE 3X3Painted IA2102(color) 10'2" IA2142(color)IA2142(color) 14'2" 14'2" side IA2122(color) 12'2" INSIDE ANGLE 3X3 IA3102(color)IA2162(color) 16'2"10'2" IA2162(color)IA2142(color) 14'2" 16'2" IA2182(color) 18'2" IA3122(color)IA3102(color)IA2162(color) 16'2"12'2"10'2" IA2182(color)IA2204(color) 20'4" 18'2" IA3142(color)IA3122(color)IA2182(color) 18'2"14'2"12'2" IA2204(color)IA2204(color) 20'4" 20'4" GIRTH 5" IA3162(color)IA2204(color) 20'4"16'2" INSIDE ANGLE 3X3 IA3142(color) 14'2" IA3182(color)IA3162(color)IA3102(color) 18'2"10'2"16'2" INSIDE INSIDE ANGLE ANGLE 3X3X33 IA3102(color) 10'2" IA3204(color)IA3122(color) 12'2"20'4" IA3182(color)IA3122(color)IA3102(color) 10'2" 12'2"18'2" IA3142(color) 14'2" Painted IA3204(color)IA3122(color) 12'2" 20'4" side IA3142(color)IA3162(color) 16'2" 14'2" IA3142(color) 14'2" IA3182(color) 18'2" IA3162(color)IA3162(color) 16'2" 16'2" INSIDE ANGLE 4X4 IA3204(color) 20'4" IA3182(color)IA3182(color) 18'2" 18'2" IA4102(color)IA3204(color) 20'4"10'2" INSIDE ANGLE 4X4 IA3204(color) 20'4" GIRTH 7" IA4122(color)IA3204(color) 12'2"20'4" IA4102(color) 10'2" INSIDE ANGLE 4X4 IA4142(color) 14'2" IA4102(color)IA4102(color) 10'2" 10'2" INSIDE INSIDE ANGLE ANGLE 4X 4X44 IA4122(color) 12'2" IA4162(color)IA4122(color) 12'2"16'2" IA4142(color)IA4122(color)IA4102(color) 10'2" 12'2"14'2" IA4182(color)IA4122(color)IA4142(color) 12'2"14'2"18'2" Painted IA4122(color) 12'2" IA4162(color)IA4142(color)IA4162(color) 16'2" 14'2"16'2" side IA4204(color)IA4142(color) 14'2"20'4" IA4182(color) 18'2" IA4182(color)IA4162(color)IA4162(color) 16'2" 16'2"18'2" IA4182(color)IA4204(color) 18'2"20'4" GIRTH 9" IA4204(color)IA4182(color)IA4182(color) 18'2" 18'2"20'4" IA4204(color) 20'4" OUTSIDE ANGLE 2X2 IA4204(color) 20'4" OUTSIDE ANGLE 2X2 OA2102(color) 10'2" OA2102(color) 10'2"
OUTSIDEOUTSIDE ANGLE ANGLE 2X 2X22 OA2122(color)OA2102(color)OA2122(color) 12'2"12'2"10'2" OUTSIDE ANGLE 2X2 OA2102(color) 10'2" OA2142(color)OA2102(color)OA2122(color)OA2142(color) 14'2"14'2"12'2"10'2" OA2122(color) 12'2" OA2162(color) 16'2" Painted OA2162(color)OA2122(color)OA2142(color)OA2142(color) 14'2"16'2"14'2"12'2" side OA2182(color) 18'2" OA2182(color)OA2162(color) 16'2"18'2" OA2142(color)OA2162(color)OA2204(color) 20'4" 16'2" 14'2" OA2182(color) 18'2" OA2204(color)OA2162(color)OA2204(color) 20'4"20'4" 16'2" OA2182(color)OA2204(color) 20'4" 18'2" OA2182(color) 18'2" GIRTH 5" OA2204(color) 20'4" OUTSIDE ANGLE 3X3 OA2204(color) 20'4" OA3102(color) 10'2" OUTSIDE ANGLE 3X3 OUTSIDEOU TSIDEANGLE ANGLE 3X3 3X3 OA3102(color)OA3122(color) 12'2" 10'2" OA3102(color) 10'2" OA3102(color)OA3142(color) 14'2"10'2" OA3122(color)OA3122(color) 12'2" 12'2" OA3162(color) 16'2" OA3122(color)OA3142(color) 14'2"12'2" OUTSIDE ANGLE 3X3 OA3142(color)OA3182(color) 18'2" 14'2" Painted OA3142(color)OA3162(color) 16'2"14'2" side OA3102(color)OA3162(color)OA3182(color)OA3204(color) 18'2"20'4" 16'2" 10'2" OA3162(color)OA3182(color) 18'2"16'2" OA3122(color)OA3182(color)OA3204(color) 20'4" 18'2" 12'2" OUTSIDE ANGLE 4X4 OA3182(color) 18'2" OA3142(color)OA3204(color)OA4102(color) 10'2" 20'4"14'2" OUTSIDE ANGLE 4X4GIRTH 7" OA3204(color) 20'4" OA4122(color) 12'2" OA3162(color)OA4102(color) 10'2" 16'2" OA4142(color) 14'2" OUTSIDE ANGLE 4X4 OA3182(color)OA4102(color)OA4122(color) 12'2" 10'2"18'2" OUTSIDE ANGLE 4X4 OA4162(color) 16'2" OA4142(color) 14'2" OA3204(color)OA4122(color)OA4182(color) 18'2" 12'2"20'4" OA4102(color)OA4162(color) 16'2"10'2" OA4142(color)OA4182(color)OA4204(color) 18'2"20'4" 14'2" Painted OA4122(color)OA4182(color) 18'2"12'2" OUTSIDE ANGLEside 4X4 OA4142(color) OA4162(color)OA4204(color) 20'4"14'2" 16'2" OA4162(color)OA4102(color)OA4182(color) 16'2"18'2"10'2" OA4182(color)OA4122(color)OA4204(color) 18'2"20'4"12'2" GIRTH 9" OA4204(color)OA4142(color) 20'4"14'2" OA4162(color) 16'2" OA4182(color) 18'2" OA4204(color) 20'4" CENTRAL STATES MANUFACTURING, INC. Effective 7/2013 • Information subject to change 15 R-LOC TRIMS Orders for trims other than 10'2" in length must be in by 9:00am the day of your cutoff. All angles are 90° or 45° unless otherwise noted. All trims are 26 gauge unless otherwise specified. Part Number Length
RAKE TRIM RA102(color) 10'2" RA122(color) 12'2" 105° 135° 135° RA142(color) 14'2" 150° RA162(color) 16'2" RA182(color) 18'2" 105° RA204(color) 20'4"
BOX RAKE TRIM BRT102(color) 10'2"
BRT122(color) 12'2" 135° 135° BRT142(color) 14'2"
BRT162(color) 16'2"
BRT182(color) 18'2"
BRT204(color) 20'4"
HI-SIDE EAVE TRIM HI102(color) 10'2" 105° HI122(color) 12'2" roof pitch HI142(color) 14'2" 150° HI162(color) 16'2" HI182(color) 18'2" 105° HI204(color) 20'4" specify pitch
SHORT EAVE TRIM SEA102(color) 10'2" SEA122(color) 12'2" SEA142(color) 14'2" roof pitch SEA162(color) 16'2" SEA182(color) 18'2" 135° SEA204(color) 20'4" specify pitch R-LOCLONG EAVE TRIM ™ TRIMS LEA102(color) 10'2"
roof pitch LEA122(color) 12'2" Orders forLEA142(color) trims other than 10'2" in length14'2" must be in 9:00 am the day of your cutoff. All angles are 90°LEA162(color) or 45° unless otherwise noted.16'2" All trims are 26 gauge unless otherwise specified. LEA182(color) 18'2" Orders for trims other than 10'2" in length must be in by 9:00am 135° LEA204(color)Part # 20'4" Length Notes R-LOC TRIMS the day of your cutoff. All angles are 90° or 45°specify unless pitc otherwiseh noted. OrdersAll trims for trimsare 26 other gauge than unless 10'2" otherwise in length specified. must be in by 9:00am R-LOCOUOUTSIDETSIDE CO RNECO RTRIMSRNER OrderstheOU102(color) day forof yourtrims cutoff. other thanAll angles10'2" inare length 90° or10'2" must 45° unlessbe in by otherwise 9:00am noted. R-LOC TRIMS theAll daytrims of are your 26 cutoff.gauge unlessAll angles otherwise are 90° specified. or 45° unless otherwise noted. OU102(color)PartAllOU122(color) trims Number are 26 gauge unless Lengthotherwise10'2" specified.12'2" OU122(color) 12'2" 135° 135° PEAKPainted BOX FO R BOX RAKE & OU142(color)PartOU142(color) Number Length 14'2" 14'2" side Part Number Length PEAK BOX FIXED FOR BOX RAKE OU162(color)PBBV(color) 3'16'2" PEAK BOX FOR BOX RAKE & OU162(color) 16'2" PBBF(color)Orders for trims other than3' 10'2" in lengthspecify must bepitc inh by 9:00am PEAK BOX FOR135° BOX RAKE & OU182(color) 18'2" PEAK BOX FIXED FOR BOX RAKE PBBV(color) OU182(color)the day of your cutoff.3' All angles are 18'2"90° or 45° unless otherwise noted. PEAK BOXR-LOC FIXED FOR BOX TRIMS RAKE OU204(color)PBBV(color) 3' 20'4" PBBF(color)All trims are 26 gauge3' unless otherwisespecify specified. pitch 135° GIRTH 13.25" PBBF(color)OU204(color) 3' 20'4"specify pitch Part Number Length INSIDE CORNER IN102(color) 10'2" INSIDE CORNER 135° IN122(color) 12'2" FORMED RIDGE CAP 135° IN102(color) 10'2" FIN142(color)RC36(color)IN122(color) 3'0"12'2" 14'2" FORMED RIDGE CAP specify pitch up to 6:12 FORMED RIDGE CAP IN162(color)IN142(color) 14'2" 16'2" Painted FRC36(color)IN162(color) 3'0" 16'2" side FRC36(color) 3'0" IN182(color)IN182(color) 18'2" 18'2"specify pitch up to 6:12 135° specify pitch up to 6:12 IN204(color) 20'4" 3 135° 18'' GIRTH 13" IN204(color) 20'4"
SIDEW3 ALL18'' TRIM SKYLIGHT3 TRIM18'' SK102(color) 10'2" SKYLIGHT TRIM SI102(color) 10'2" SK122(color) 12'2" Painted SK102(color)SI122(color) 10'2"12'2" SKYLIGHT TRIM side SK122(color)SI142(color) 12'2"14'2" SKYLIGHT TRIM SK142(color) 14'2" SK102(color)SK142(color)SI162(color) 10'2"14'2"16'2" SK102(color) 10'2" 125° 125° SK122(color)SK162(color)SK162(color)SI182(color) 12'2"16'2"18'2" 16'2" SK122(color) 12'2" specify degree of bend 125° 125° SK142(color)SK182(color)SI204(color) 14'2"18'2"20'4" SK142(color)SK182(color) 14'2" 18'2" 125° 125° SK162(color)SK204(color) 16'2"20'4" 125° 125° SK162(color)SK204(color) 16'2" 20'4" 125° TRANSITION TRIMGIRTH125° 7" SK182(color) 18'2" EX125°TENDED VALLEY 125° SK182(color) 18'2" SK204(color)EVTR102(color)A102(color) 20'4"10'2" 10'2" SK204(color) 20'4" EVTR122(color)A122(color) 12'2"12'2" EXEXTENDED TENDED VALLEY VALLEY EVA102(color) 10'2" intended for valley lengths of EXTENDED VALLEY EVEVA102(color)TR142(color)A142(color) 10'2"14'2"14'2" EVEVA122(color)A102(color)TR162(color) 10'2" 16'2" 12'2" 30' or more Painted EVEVA122(color)A162(color) 12'2"16'2" EVA122(color)TR182(color) 12'2" 18'2" side 135° EVEVA142(color)A182(color) 14'2"18'2" specify pitch EVEVA142(color)A142(color) 14'2" 14'2" 135° EVEVA162(color)TR204(color)A204(color) 16'2"20'4"20'4" specify pitch EVA162(color) 16'2" EVEVA162(color)A182(color) 18'2" 16'2"specifyThere pitcwillh be an 90° EVA182(color) 18'2" specify pitch EVEVA182(color)A204(color) 20'4" 18'2"additional pallet charge TIE IN TRIM EVA204(color) 20'4" There will be an additional pallet charge 90° TI102(color) 10'2" There will be an GIRTH 41.5" EVA204(color) 20'4"additional pallet charge will apply COMMERCIAL90° VALLEY TI122(color) 12'2" additional pallet charge VA 102(color) 10'2" TI142(color) 14'2" COMMERCIAL VA LLEYRoof pitch VATI162(color)122(color) 12'2"16'2" COMMERCIALCOMMERCIAL VALLEY VALLEY VAVAVA102(color)102(color)142(color) 10'2"14'2" 10'2" intended for valley lengths VA102(color)TI182(color) 10'2" 18'2" VAVA122(color)162(color) 12'2"16'2" VAVA122(color)122(color)TI204(color) 12'2" 20'4" 12'2" less than 30' Painted VAVA142(color)182(color) 14'2"18'2" specify pitch side VA142(color) 14'2" specify pitch VAVAVA142(color)162(color)204(color) 16'2"20'4" 14'2" VA162(color) 16'2" specifyThere pitcwillh be an specify pitch HIGH SIDE PARAPET TRIM VAVA162(color)182(color) 18'2" 16'2"specify pitch 90° VA182(color) 18'2" additional pallet charge VA204(color)HSP102(color) 20'4" 10'2" VA204(color) 20'4" There will be an VA182(color)HSP122(color) 12'2" 18'2"There will be an additional pallet charge FLAT SHEETS 90° additional pallet charge 90° HSP142(color) 14'2" additional pallet charge will apply Roof pitchGIRTH 20.75" FS102(color)VA204(color) 10'2" 20'4" H SP162(color) 16'2" FS122(color) 12'2" FLA T SHEETS HSP182(color) 18'2" FLAT SHEETS FS102(color)FS142(color) 10'2"14'2" FS102(color)SG6(color)HSP204(color) 10'2" 20'4" 10'2" available in 10'2" only SNO W GU ARD FS122(color)FS162(color) 12'2"16'2" FS122(color) 12'2" specify pitch FS142(color)FS182(color) 14'2"18'2" FS142(color) 14'2" FS162(color)FS204(color) 16'2"20'4" COMMERCIAL RA T GUARD FS162(color) 16'2" FS182(color) 18'2" FS182(color) 18'2" There will be an 41 9/16" FS204(color) 20'4" FS204(color)RG102(color) 20'4" 10'2" additional pallet charge There will be an 41 9/16" RG122(color) 12'2" There will be an 55° additional pallet charge 41 9/16" RG142(color) 14'2" additional pallet charge RG162(color) 16'2" GIRTH 5.5" RG182(color) 18'2" 135° RG204(color) 20'4" CENTRAL STATES MANUFACTURING, INC. 16 Effective 7/2013 • Information subject to change CENTRAL STATES MANUFACTURING 302 Jane Place Lowell, AR 72745 Phone: 800-356-2733 Fax: 800-356-2971 www.centralstatesmfg.com INSTALLATION DETAIL GUTTERS
LOW EAVE WITH GUTTER 7 38 " #12 X 7/8" LAP (2 PER GUTTER STRAP) BUTYL TAPE INSIDE CLOSURE 3 38 " BUTYL TAPE
ROOF PANEL GUTTER STRAP (36" O.C.) DOWNSPOUT OUTLET
#12 X 7/8" LAP (12" O.C.)
EAVE TRIM GUTTER
FIELD CUT & BEND OUTLET IN BOTTOM OF GUTTER (SEAL CONNECTION AND FASTEN WITH POP RIVETS) SLEEVE (TYP)
45° ELBOW
SOFFIT PANEL
SLEEVE (TYP)
45° ELBOW
SECTION VIEW DOWNSPOUT
A
A
7/8" LAP (24" O.C.)
BUTYL TAPE (SIDELAP) BUTYL TAPE (CLOSURE TO SIDELAP) BUTYL TAPE (OVER CLOSURE) PREVAILING WINDS 45° ELBOW SECTION A-A INSIDE CLOSURE VIEW AT SIDE LAP BUTYL TAPE (UNDER CLOSURE) DOWNSPOUT SLEEVE
DOWNSPOUT SLEEVE
DOWNSPOUT STRAP ISOMETRIC VIEW
CENTRAL STATES MANUFACTURING, INC. Effective 7/2013 • Information subject to change 17 GUTTERS All angles are 90° or 45° unless otherwise noted.
All angles are 90° or 45° unless otherwise noted. All angles are 90° or 45° unless otherwise noted. All angles are 90°Part or 45° # unless otherwise noted. Length “Dim. A” is 6.5" onN otes1:12-3:12 pitch All anglesGU102(color) are 90° or 45° unless otherwise noted. 10'2" and 6.88" on 4:12-6:12 pitch STANDARD GUTTERRoof pitch "Dim. A" is 6.5" on 1:12-3:12 pitch All angles are 90° or 45° unless otherwise noted. 90° - ° of GU122(color) “Dim. A” is 6.5" on12'2" 1:12-3:12 pitch and 6.88" on 4:12-6:12 pitch All anglesroof slope are 90° or 45° unless otherwise noted. 150° “Dim. and A” is6.88" 6.5" onon 4:12-6:121:12-3:12 pitch Painted Roof pitch GU142(color) 14'2" Girth 20.75" on 1:12-3:12 pitch side Dim. A and“Dim. 6.88" A” on is 4:12-6:12 6.5" on 1:12-3:12pitch pitch Girth 21.13" on 4:12-6:12 pitch 90°Roof - ° ofpitch GU162(color) 16'2" roof slope 90° + ° of and 6.88" on 4:12-6:12 pitch 150° 90° - ° ofRoof105° pitchroof slope “Dim. A” is 6.5" on 1:12-3:12 specifypitch pitch roof slopeDim. A GU182(color) 18'2" 150° 90° - ° of “Dim. A” is 6.5" and on 6.88" 1:12-3:12 on 4:12-6:12 pitch pitch specify pitch roof slope 90 - of roof slope Roof90° pitch + ° of Dim. A 105° roof slope 150° GU204(color) andspecify 6.88" pitchon 4:12-6:1220'4" pitch Roof pitch90° + ° of Dim. A 90°-° of roof slope 105°90° roof- ° of slope 90specify - of pitch roof slope roof slope 90° - ° of 90° + ° of 150° roof slope 105° roof slope 90 - of roofspecify slope pitch 150° Dim. A Dim. A SGU102(color) 9010'2" - of roof slope SCULPTURED90° G+ ° ofUTTER “Dim. A” is 6.5" on 1:12-3:12"Dim. A" is pitch 6.5" on 1:12-3:12 pitch 105°90°roof + slope° of “Dim. A” isspecify 6.5" on pitch 1:12-3:12 pitch 105° roof slope and 7" on 4:12-6:12 pitch SGU122(color) “Dim.specify A” ispitch 6.5" on12'2" 1:12-3:12 pitch and 7" on 4:12-6:12 pitch Roof pitch 90 - andof 90 roof 7"- ofslopeon roof 4:12-6:12 slope pitch Roof pitch 90° + ° of and 7" on 4:12-6:12 pitch Painted Roof pitch 90° + ° of roof slopeSGU142(color) “Dim. A”14'2" is 6.5" on 1:12-3:12 pitch Girth 24" on 1:12-3:12 pitch roof slope 90° + ° of side roof slope and 7" on 4:12-6:12 pitch Girth 24.5" on 4:12-6:12 pitch 150° 150°Roof pitch SGU162(color) 16'2" 150° Dim. A 90° + ° of “Dim.“Dim. A” is 6.5"A” ison 6.5" 1:12-3:12 on 1:12-3:12 pitch pitch Dim. A roofDim. slope A 90° + ° of SGU182(color) and 7" andon 4:12-6:12 18'2"7" on 4:12-6:12 pitch pitch 105° 150° 90° + ° of Roofroof pitch pitch slope90° + ° of 105° roof slope105° roof slope specify pitch 90°90° + °+ of ° of Dim. A SGU204(color) 20'4" roofroof slope slope 90° + ° of 105° 150° roof slope 150° Dim.Dim. A A 90° + ° of GUTTER 105°ENDroof90° slope + ° of CAP GEN(color) 75°105° roof slope 75° specify pitch 75°75° 150° 150° left hand for standard or shown 75° 150°150° 75° 75° 75° sculptured gutter
150° 75° 150° 75°
75° “Dim.“Dim. A” A” is is 4" 4" onon 0:12-3:120:12-3:12 pitchh 75° BHG102(color) and and 4.375" 4.375" onon10'2" 4:12-6:124:12-6:12 pitchpitch "Dim. A" is 4" on 0:12-3:12 pitch BOX HANG-ON GUTTER “Dim. A” is 4" on 0:12-3:12 pitch Roof and 4.375" on 4:12-6:12 pitch Roof pitch BHG122(color) and12'2" 4.375" on 4:12-6:12 pitch pitch Dim. A “Dim. A” is 4" on 0:12-3:12 pitch Dim. A “Dim. A” is 4" on 0:12-3:12Girth 16.75" pitch on 1:12-3:12 pitch Painted Roof BHG142(color) and 4.375" on 4:12-6:1214'2" pitch pitch and 4.375" on 4:12-6:12Girth 17.125" pitch on 4:12-6:12 pitch side Dim. ABHG162(color) “Dim. A” is 16'2"4" on 0:12-3:12 pitch Roof pitch and 4.375" on 4:12-6:12 pitch Dim. A Roof BHG182(color) 18'2" pitch Roof specify pitch pitch BHG204(color)Dim. A “Dim. A” is 4" on20'4" 0:12-3:12 pitch Dim. A “Dim. and A” 4.375" is 4" onon 0:12-3:124:12-6:12 pitchpitch and 4.375" on 4:12-6:12 pitch Roof pitch “Dim. A” is 4" on 0:12-3:12 pitch Roof pitch Dim. A and 4.375" on 4:12-6:12 pitch BOX EAVE GDim.U ATTER BEG102(color) “Dim. A” is 4" on 0:12-3:1210'2" pitch "Dim. A" is 4" on 0:12-3:12 pitch Roof pitch and 4.375" on 4:12-6:12 pitch and 4.375" on 4:12-6:12 pitch Dim. A BEG122(color) 12'2" Roof pitch “Dim. A” is 4" on 0:12-3:12 pitch BOX GUTTER END CAP Girth 20.5" on 1:12-3:12 pitch Painted Dim. A BEG142(color) 14'2" “Dim. A” is 4" on 0:12-3:12 pitch BOX GUTTER END CAP BGEND(color) and 4.375" on 4:12-6:12 pitch Girth 20.875" on 4:12-6:12 pitch side and 4.375" on 4:12-6:12 pitch Roof pitch BGEND(color)BEG162(color) 16'2" BOX GUTTERright-hand END show CAPn Dim. A Roof pitch BOX GUTTER ENDright-hand CAP shown BEG182(color)BGEND(color) 18'2" Dim. A specify pitch right-hand showBGEND(color)n BEG204(color) 20'4" right-hand shown BOX GUTTER END CAP BGEND(color) BOX BOXGUTTER GUTTER END END CAP CAP BGEND(color) right-hand shown BGEND(color) right hand shown right-hand shown for Box Hang-On or Box Eave Gutter
CENTRAL STATES MANUFACTURING, INC. 18 Effective 7/2013 • Information subject to change GUTTERS All angles are 90° or 45° unless otherwise noted. Part Number Length
GUTTER STRAP GS9(color) 9"
125°
DOWNSPOUT W/O KICKOUT
DS102(color) 10'2" DS122(color) 12'2" DS142(color) 14'2" GUTTERS All angles are 90° or 45° unless otherwise noted. DS162(color) 16'2" GUTTERS All angles are 90° or 45° unless otherwise noted. GUTTERSDS182(color) 18'2" DS204(color) 20'4" GUTTERS PartAll angles Number are 90° or 45° unlessLength otherwise noted. PartAll anglesNumber are 90° or 45° unlessLength otherwise noted. GUTTER STRAP Part Number LengthDOWNSPOUT WITH KICKOUT GUTTER STRAP GS9(color)Part # 9" Length Notes GS9(color) 9" GUGUTTERTTER STRAP STRAP GS9(color) 9" DK102(color) 10'2" GS9(color) 9" DK122(color) 12'2" 125° DK142(color) 14'2" 125° GUTTERS All angles areDK162(color) 90° or 45° unless otherwise noted. 16'2" DK182(color) 18'2" 125° DOWNSPOUT W/O KICKOUT PartDK204(color) Number Length20'4" DOWNSPOUTGUTTERS W/O KICKOUT All angles are 90° or 45° unless otherwise noted. DOWNSPOUT W/O KICKOUT DS102(color) 10'2" GUTTER STRAP DOWNSPOUT W/O KICKOUTDS102(color) 10'2" GS9(color) 9" DS122(color)DS122(color)DS102(color)Part Number 12'2"10'2"12'2"LengthDO WNSPOUT ELBOW Painted DS142(color)DS142(color)DS122(color) 14'2"12'2"14'2" DSE45(color) sideGUTTER STRAP DS102(color) 10'2" DS142(color) 14'2" 125° DSE90(color) DS162(color)DS162(color)DS122(color) 16'2" 16'2"12'2" DS162(color)GS9(color) 16'2"9" DS182(color)DS142(color) 18'2" 14'2" DS182(color)DS182(color) 18'2"18'2" DOWNSPOUT W/O KICKOUT DS204(color)DS162(color) 20'4" 16'2" DS204(color)DS204(color) 20'4"20'4" 125° GIRTH 16" DS182(color) 18'2" DS102(color) 10'2" DS204(color) 20'4" DS122(color) 12'2" DOWNSPOUTDOWNSP WITHOU KICKOUTT WITH KICKOUT DK102(color) 10'2" DS142(color) 14'2" DOWNSPOUT WITH KICKOUT DOWNSPOUT STRAP DOWNSPOUT W/O KICKOUT DK122(color) 12'2" DS162(color) 16'2" DK102(color) 10'2" DS182(color)DSS2(color) 18'2" DOWNSPOUT WITH KICKOUT DK142(color) 14'2" DK122(color)DK102(color)DS102(color) 12'2"10'2"10'2" DS204(color) 20'4" DK162(color)DK122(color) 12'2"16'2" Painted DK142(color)DK102(color)DS122(color) 14'2" 12'2"10'2" side DK142(color) 14'2" DK162(color)DK182(color)DK122(color)DS142(color) 16'2" 18'2"14'2"12'2"DOWNSPOUT WITH KICKOUT DK162(color) 16'2" DK182(color)DK204(color)DK142(color)DS162(color) 18'2" 20'4"16'2"14'2" DK182(color)DS182(color) 18'2"18'2" DK102(color) 10'2" DK204(color)DK162(color) 20'4" 16'2" DK122(color)Orders for trims other than12'2" 10'2" in length must be in by 9:00am GUTTERS All DK204(color)anglesDS204(color) are 90° or 45° unless otherwise20'4" noted.20'4" the day of your cutoff. All angles are 90° or 45° unless otherwise noted. DK182(color) 18'2"R-LOC TRIMSDK142(color)All trims are 26 gauge unless14'2" otherwise specified. PartDK204(color) Number Length20'4" DK162(color) 16'2" DK182(color)Part Number 18'2"Length DOWNSPOUTDOWNSP ELBOUOWT OUTLET DSOUTLET(color) DOWNSPDOWNSPOUTOUT C CONNECTONNECTOROR DSLVE(color) DOWNSPOUTDOWNSPOUT ELBOW WITH KICKOUT DK204(color) 20'4" DOWNSPOUT OUTLET DSE45(color) WAINSCOT TRIM DSLVE(color) 4" DSE45(color)DSOUTLET(color) 4" WA102(color) 10'2" DOWNSPOUT ELBOW DSE90(color)OrdersDK102(color) for trims other than 10'2" in length10'2" must be in by 9:00am DSE90(color)the day of your cutoff. All angles are 90° or 45° unless otherwise noted. WA122(color) 12'2" R-LOC TRIMS1/2" turn DSE45(color)DK122(color) 12'2"DOWNSPOUT ELBOW WA142(color) 14'2" All trims are 26 gauge unless otherwise specified. Painted downs DSE45(color)WA162(color) 16'2" DSE90(color)DK142(color) 14'2" side DSE90(color) Part Number Length WA182(color) 18'2" DK162(color) 16'2" 135° WAINSCOT TRIM DK182(color) 18'2" WA204(color) 20'4" WA102(color) 10'2" DK204(color) 20'4" WA122(color) 12'2" JAMB HEADER JH102(color) 10'2" DOWNSPOUT STRAP WA142(color) 14'2" JH122(color) 12'2" DO WNSPOUT STRAP DSS2(color)WADSE45(color)162(color) Orders for16'2" trims other than 10'2" in length must be DSS2(color) DOWNSPOUT ELBOW DSS2(color) in by 9:00am theD dayO WNSPof your DO cutoff.WNSPOUTOU T STRAP STRAP JH142(color) 14'2" M-LOCDOWNSPOUT 135° ELB GUTTERSOW WA182(color) 18'2" DSS2(color) DOWNSPOUT STRAP DSE90(color) All trims are 26 gauge unless otherwise specified. JH162(color) 16'2" WA204(color)DSE45(color) 20'4" DSS2(color) JH182(color) 18'2" Painted PartDSE90(color) Number Length JH204(color) 20'4" JAMB HEADER side Painted JH102(color) 10'2" side JH122(color) 12'2" OUTSIDE CORNER BOX JH142(colorMGU102(color)) 14'2"10'2" “Dim. A” is 7.25" on 1:12-3:12 OCB(color) JH162(color) 16'2" and 7.625" on 4:12-6:12 MGU122(color) 12'2" Roof pitch JH182(color) 18'2" MGU142(color) 14'2" 90° - ° of JH204(colorMGU162(color)) 20'4"16'2" DOWNSPOUT STRAP roof slope DOWNSPOUT CONNECTOR DOWNSPOUTOUTSIDE CONNECT CORNEROR150° B OX OCB(color)MGU182(color) 18'2"INSIDE CORNER BOX ICB(color)DSLVE(color) 4" Dim. A DSS2(color) INSIDE CORNER BOX DOOUTSIDEWNSPOUT CORNER CONNECT BOX OR DSLVE(color)MGU204(color) 4"20'4" 90° + ° of 105° roof slope OCB(color)DSLVE(color) 4" specify pitch DOWNSPOUT CONNECTOR ICB(color) 90 - of roof slope
DSLV E(color) 4"
INSIDE CORNERPainted BOX Painted side MSGU102(color) 10'2" “Dim.RAKE A” is 7.25"TRIMside onEND 1:12-3:12 CAP
MSGU122(color) 12'2" and 7.625" on 4:12-6:12 REND(color) Roof pitch ICB(color) 105° 90° + ° of MSGU142(color) 14'2" roof slope MSGU162(color) 16'2" left-hand shown
DOWNSPOUT150° CONNECTOR MSGU182(color) 18'2" 150° Dim. A MSGU204(color)DSLVE(color) 20'4" 4" 90° + ° of CENTRAL STATES MANUFACTURING, INC. RAKE TRIM END CAP105° roof slope Effective 7/2013 • Information subject105° to change 19 REND(color) 105° left-hand shown BOX RAKE TRIM END CAP BOX HANG-ON GUTTER 1 150° 2 BREND(color) MBHG102(color) “Dim. A” is 4.4375" on 0:12-3:12 pitch 105° MBHG122(color) left-hand shown
MBHG142(color) and 4.8125"63 4 on 4:12-6:12 pitch MBHG162(color) Roof pitch BOX RAKE TRIM END CAP Dim. A MBHG182(color) 1 2 2 BREND(color)MBHG204(color)
left-hand shown PEAK BOX FOR STANDARD RAKE 63 4 PBOXF(color) 2'6'' MBEG102(color) PBOXV(color) 3' specify pitch 2 MBEG122(color) “Dim. A” is 4.4375" on 0:12-3:12 pitch MBEG142(color) andPBOXF-FIXED 4.8125" on 4:12-6:12 pitch Roof pitch PEAK BOX FOR STANDARD RAKE MBEG162(color) PBOXV-VARIABLE Dim. A PBOXF(color)MBEG182(color) 2'6'' PBOXV(color)MBEG204(color) 3' specify pitch
PBOXF-FIXED PBOXV-VARIABLE Orders for trims other than 10'2" in length must be in by 9:00am ACCESSORIESR-LOC TRIMS the day of your cutoff. All angles are 90° or 45° unless otherwise noted. ACCESSORIESACCESSORIESAll trims are 26 gauge unless otherwise specified. Part Number Color Length Part NumberPart Number Color Length Length Part NumberPart # Color C o LOR Length LENGTH R-LPEAKOC BOX SKYLIGHT FOR BOX RAKE & R-LOC SKYLIGHT FIBERGLASSR-LPEAKOC BOX SKYLIGHT FIXED FORSKYLIGHT BOX RAKE PBBV(color)SKY12R 3' White 12' SKY11R White 11' SKY11R PBBF(color) White 3' specify 11' pitch ACCESSORIES SKY11R White 11' Part Number Color Length # per bag # per box 8oz per square foot 8oz per8oz persquare square foot foot METAL/MET8ozAL per SCREWS square #12foot POLYCARBONATE 34(color)MM all 3/4" 250 2500 POLYCARBONATE PO SKYLIGHTFO L RMED YCARBON RIDGE 5/16" Ahead CAPTE 114(color)M M SKYPC(color)R12 all 1 1/4" 250 White, Clear 2500 12' PSKYLIGHTOLYCARB O NATE SKYLIGHT 112(color)M M F RC36(color) White, Green, 1 1/2" 3'0" 250 2500 SKYLIGHT SKYPC(color)R11 White, Clear specify 11' pitch up to 6:12 SKYPC(color)R11 Brilliant, White,Stone, Clear 11' SKYPC(color)R11 Bare White, Clear 11'
3 LAP SCREWS #14 18'' 78(color)LA P all 7/8" 250 2500 SKYLIGHTM-LOC SKYLIGHT 5/16" TRIM head SK102(color) 10'2" M-LOCSKYLIGHT SKYLIGHT TRIM M-LOC SKYLIGHT SKY11M SK122(color) White Fiberglass *order 12'2"in increments 11' of 250pc Painted SKY11MSK102(color) White Fiberglass10'2" 11' 6 SKY11M White Fiberglass 11' 6 side SK122(color)SK142(color) 12'2" 14'2" 6 3 16 SK142(color) 14'2" 3 16 125° 125° 3 SK162(color) 16'2" 16 SK162(color) 16'2" ZAC SCREWS- METAL/METAL125° SCREWS 125° SK182(color)SK182(color) 18'2" 18'2"
SK204(color)SK204(color) 20'4" 20'4" 5/16" head 114ZACMM Bare 1 1/4" 250 2000 EXTENDED VALLEY EVA102(color) 10'2"
EV RLW A122(color) 12'2" *order Whitein increments of 250pc 10' CCONTINUOUS ONTIN UOU RIDGES VENT EVA142(color) 14'2" *Constant open damper only RIDGECONTINUOUS VENT RIDGE VENT CONTINUOUS RIDGE VENT EVA162(color) 16'2"
RLW EVA182(color) White 18'2" specify10' pitch R L W White 10' R L W EV A204(color) White 20'4" 10'*Constant open damper only There *Constant will be an open damper only 90° *Constant open damper only ZAC SCREWS - additional pallet charge LAP SCREWS
COMMERCIAL 5/16" VA headLLEY 78ZACLAP Bare 7/8" 250 2500 VA102(color) 10'2" CLCONTINUOUSOSURE VENT RIDGE VENT WITHVA CLVRM(Marco)DAMPER122(color) 12'2" *order in increments of 250pc 3' CONTINUOUS RIDGE VENT WITH DAMPER CONTINUOUS RIDGE VENT WITHVA DAMPER142(color) 14'2" *25 per box 1 4 211 RVW/D VA 162(color) All Colors 16'2" 1' 0’ 21 4 1 RVW/D All Colors specify 1' 0’ pitc h 21134 RVW/D All Colors 1' 0’ 13 VA 182(color) 18'2" 13 Part NumberVA204(color) 20'4" LengthThere will be an 1 2 90° 14 additional pallet charge 141 2 CLOSURES 1 CL OSU RES 14 2 CLOUTR (R-loc outside no adhesive) 3' (INSIDE or OUTSIDE) FLA T SHEETS 9 CLOUTRCLINR R-Loc Long(R-loc outside lead inside timeno adhesives mayno adhesive) apply 3'to locations outside 3'of Cedar Hill. 9 FS102(color) Long lead time10'2"s may apply to locations outside of Cedar Hill. 18 9 CLINR R-Loc Long inside lead notime adhesives may apply 3'to locations outside of Cedar Hill. 18 FS122(color)CLOUTRGLUE Contact (R-loc salesperson outside12'2" with for details.adhesive) 3' 18 1 4 28 1 CLOUTRGLUE R-Loc Contact outside salesperson with adhesive for details. 3' 28 4 1 FS142(color) CLINRGLUE Contact (R-loc salesperson inside14'2" with for adhesive) details. 3' 28 4 CLINRGLUE R-Loc inside with adhesive 3' inside FS162(color) 16'2" MCLOUTWGLUE M-Loc outside with adhesive 3' *100 per box CLOSURE VENT FS182(color) 18'2" CLOSURE VENT MCLINWGLUE M-Loc inside with adhesive 3' CLVR (withFS204(color) adhesive) 20'4" 3' CLOSURE VENT CLVR (with adhesive) 3' CCLL VRVRM (with (Marco) adhesive) There *100pc 3'3' will per be boxan outside 41 9/16" CLVRM (Marco) 3' C L VRM (Marco) additional 3'*30 per pallet box charge *30 per box *30 per box
CENTRAL STATES MANUFACTURING, INC. 20 Effective 7/2013 • Information subject to change ACCESSORIES ACCESSORIESACCESSORIESPart # CoLOR LENGTH #per bag #per box ACCESSORIES Part Number Color Length # per bag # per box METAL/ Part Number34(color)MM Color Lengthall # per bag # per box3/4" 250 2500 Part Number Color Length # per bag # per box METALME SCREWSTAL/METAL SCREWS #12 #12 114(color)MM all 1 1/4" 250 2500 METAL/METAL SCREWS #12 5/16" head METAL/METAL SCREWS 34(color)M#12 M112(color)MM al l 3/4"White, Hunter, 250 Brilliant, 2500 1 1/2" 250 2500 5/16" head 114(color)M34(color)MMM alalll 13/4" 1/4" 250250 25002500 5/16" head 114(color)M34(color)M MM alalll 13/4" 1/4"Stone, Bare 250250 25002500 5/16" head 112(color)M114(color)MMM White,all Green, 11 1/2" 1/4" 250250 25002500 5/16" head 112(color)M114(color)M2ZMMMM White,all Green, 11 1/2" galvanized1/4" 250250 25002500 2" 250 2000 112(color)M M Brilliant,White, Green, Stone, 1 1/2" 250 2500 112(color)M M Brilliant,White, Green, Stone, 1 1/2" 250 2500 BareBrilliant, Stone, Brilliant,Bare Stone, Bare LAP SCREWSLAP SCREWS #14 #14 78(color)LAP all 7/8" 250 2500 LAP SCREWS #14 78(color)LA P all 7/8" 250 2500 LAP SCREWS #145/16" head 78(color)LA P all 7/8" 250 2500 *order in increments of 250pc 5/16" head 78(color)LA P all 7/8" 250 2500 5/16" head 78(color)LA P all 7/8" *order250 in increments 2500 of 250pc *order in increments of 250pc 5/16" head *order in increments of 250pc *order in increments of 250pc
ZAC SCREWS- ZAC SCREWS/METAL/METALZAC SCREWS- SCREWS 114ZACMM Bare 1 1/4" 250 2500 METAL/METALZAC SCREWS- SCREWS *order in increments of 250pc METAL/METALMETAL/METAL SCREWS SCREWS 5/16" head 114ZACMM Bare 1 1/4" 250 2000 5/16"5/16" head head 114ZACMM Bare 1 1/4" 250 2000 5/16" head 114ZACMM Bare 1 1/4" *order250 in increments 2000 of 250pc *order in increments of 250pc *order in increments of 250pc *order in increments of 250pc
ZAC SCREWS- ZAC SCREWS/LAPZAC SCREWS SCREWS- 78ZACLAP Bare 7/8" 250 2500 LAPZAC SCREWS- LAP SCREWS 5/16" head 78ZACLAP Bare 7/8" 250 2500 *order in increments of 250pc LAP SCREWS 5/16" head 78ZACLAP Bare 7/8" 250 2500 5/16"5/16" head head 78ZACLAP Bare 7/8" 250 2500 5/16" head 78ZACLAP Bare 7/8" *order250 in increments 2500 of 250pc *order in increments of 250pc *order in increments of 250pc *order in increments of 250pc
Part Number Length ACCESSORIESPart Number Length Part Number Length CLOSURE S PartP artNumber # LENGTH Length Part # LENGTH (INSIDECLOSURE or SOUTSIDE) MASTER (INSIDECLOSURE PIPE or S OUTSIDE)FLASHING MPF CLOUTMPFR R-Loc 1/4" outside1/4" to 4" to no 4" adhesive 3' 3SMPF 1/4" to 4" MASTERACCESSORIES (INSIDE PIPE or FLASHING OUTSIDE) CLOUTR R-Loc outside no adhesive 3' MPF1 CLINCLOUTR R R-Loc R-Loc inside outside1/4" noto no 2"adhesive adhesive 3'3' CLINCLOUTR R R-Loc R-Loc inside outside no no adhesive adhesive 3'3' CLOUTRGLUECLINMPF2R R-Loc R-Loc 1 1/4" outside inside to no with 3" adhesive adhesive 3'3' 4SMPF 3" to 6" Part Number MPF2 CLOUTRGLUECLINR R-LocLength R-Loc outside inside1 1/4" nowith to adhesive 3" adhesive 3'3' CLINRGLUECLOUTRGLUE R-Loc R-Loc inside outside with with adhesive adhesive 3'3' inside MPF4 CLINRGLUECLOUTRGLUEMPF4 R-Loc R-Loc 3" toinside outside3" 6" to with 6" with adhesive adhesive 3'3' 6SMPF 5" to 9" MASTER PIPE FLASHING inside MPF MCLOUTWGLUECLINRGLUE M-Loc 1/4" R-Loc to outsideinside4" with with adhesive adhesive 3'3' inside MPF5 MCLOUTWGLUECLINRGLUE M-Loc R-Loc outsideinside4" to with7" with adhesive adhesive 3'3' insideMPF1 MCLINWGLUEMCLOUTWGLUEMPF5 M-Loc1/4"M-Loc4" to to inside2"outside 7" with with adhesive adhesive 3'3' 8SMPF 7" to 13" MPF6MCLINWGLUEMCLOUTWGLUE M-LocM-Loc inside outside5" to with9" with adhesive adhesive 3'3' MPF2 MCLINWGLUE 1M-Loc 1/4" to inside 3" with adhesive 3' MPF7MCLINWGLUEMPF6 M-Loc5" to inside6" 9" to 11"with adhesive 3' 10SMPF 13" to 26" outside MPF4 3" to 6" Maximum*100pc temperature per box outside MPF8 7" to 13" *100pc per box outside MPF5 MPF7 4" 6" to 7" to 11" 250 Degrees outside MPF9 10" to 18" *100pc per box MPF6 5" to 9" MAXIMUM TEMPERATURE 500 DEGREES MPF8 7" to 13" MPF7 4SMPF* 6" to 11"3" to 6" MPF8 7" to 13" Maximum temperature 6SMPF*MPF9 10" to5" 18"to 9" 250 Degrees MPF9 10" to 18" 8SMPF* 7" to 13" Maximum t emperature 500 degrees 4SMPF*10SMPF* 3" to 6"13" to 26" MAXIMUM TEMPERATURE 250 DEGREES 6SMPF* 5" to 9" MASTER PIPE FLASHING WITH ZIPPER 8SMPF* MPF1ZIP 7" to 13" 1/2"-4" with Maximum zipper t emperatur e MASTER PIPE FLASHING10SMPF*MPF2ZIPMPF1ZIP 13"1/2" to 26"4 - 1/4"-9"4" with with500 zipper zipper degrees WITH ZIPPER MPF2ZIP 4" - 9 1/4" with zipper MASTER PIPE FLASHING WITH ZIPPER MPF1ZIP 1/2"-4" with zipper MPF2ZIP 4 1/4"-9" with zipper
Part Number Size Color FRAMING PACKAGE 4X3070JAMB 4.25'' X 3070 White 4X4070 JAMB 4.25'' X 4070 White Part Number6X3070JAMB Size 6.25'' X 3070 Color White 6X4070JAMB 6.25'' X 4070 White FRAMING PACKAGE 4X3070JAMB 4.25'' X 3070 White 8X3070JAMB 8.25'' X 3070 White 4X4070JAMB 4.25'' X 4070 White 8X4070JAMB 8.25'' X 4070 White 6X3070JAMB8X6070JAMB 6.25'' X 8.25''3070 X 6070 White White 6X4070JAMB 6.25'' X 4070 White CENTRALPackage includes: STATES Jambs, headers, MANUFACTURING, threshold, door lever with keyed lock, INC. 8X3070JAMB Effective8.25'' X 3070 7/2013 White • Information subject to change 21 hinges, and weather strip kit. 8X4070JAMB 8.25'' X 4070 White 8X6070 JAMB 8.25'' X 6070 White PackagePart includes:Number Jambs, headers, threshold,Size door lever withOverall keyed lock, Dimension hinges, and weather strip kit. DOOR SET DR (99 Series) (Alum) 3068 37 9/16" x 81 13/16" Part NumberDR4 (99 Series) (Alum) Size 4068 Overall 49 Dimension9/16" x 81 13/16" 66DR (66 Series) (Alum) 3068 37 1/4" x 81 1/4" DOOR SET 88DR (88 Series) (Steel) 3068 40" x 81 13/16" DR (99 Series) (Alum) 3068 37 9/16" x 81 13/16" DR4 (99 Series) (Alum) 4068 49 9/16" x 81 13/16" 66DR (66 Series) (Alum) 3068 37 1/4" x 81 1/4" 88DR (88 Series) (Steel) 3068 40" x 81 13/16" DOOR LEAF
3070DOOR (Steel)(door only)(leaf) 3070 3' X 7' 4070DOOR (Steel)(door only)(leaf) 4070 4' X 7' DOOR LEAF
3070DOOR (Steel)(door only)(leaf) 3070 3' X 7' 4070DOOR (Steel)(door only)(leaf) 4070 4' X 7' ACCESSORIES Part Number Length MASTER PIPE FLASHING MPF 1/4" to 4" MPF1 1/4" to 2" MPF2 1 1/4" to 3" MPF4 3" to 6" MPF5 4" to 7"
MPF6 5" to 9" MPF7 6" to 11" MPF8 7" to 13" Maximum temperature 250 Degrees MPF9 10" to 18"
4SMPF* 3" to 6" 6SMPF* 5" to 9" ACCESSORIES8SMPF* 7" to 13" Maximum t emperature 500 degrees 10SMPF* Part Number Length 13" to 26" MASTERMASTER PIPE FLASHING PIPE FLASHING MPF 1/4" to 4" WITH ZIPPER MPF1ZIPMPF1 1/4" 1/2"-4" to 2" with zipper MPF2ZIPMPF2 1 1/4"4 1/4"-9" to 3" with zipper MPF4 3" to 6" MPF5 4" to 7"
MPF6 5" to 9" MPF7 6" to 11" MPF8 7" to 13" Maximum temperature 250 Degrees MPF9 10" to 18" Part4SMPF* Number 3" toSize 6" Color 6SMPF* 5" to 9" FRAMING PACKAGE 4X3070JAMB 4.25'' X 3070 White 8SMPF* 7" to 13" Maximum t emperature 4X407010SMPF*JAMB 13"4.25'' to 26" X 4070500 degreesWhite 6X3070JAMB 6.25'' X 3070 White MASTER PIPE FLASHING6X4070JAMB 6.25'' X 4070 White WITH ZIPPER 8X3070 MPF1ZIPJAMB 1/2"-4" 8.25'' with X zipper 3070 White MPF2ZIP 4 1/4"-9" with zipper 8X4070JAMB 8.25'' X 4070 White 8X6070JAMB 8.25'' X 6070 White ACCESSORIESPackage includes: Jambs, headers, threshold, door lever with keyed lock, hinges, and weather strip kit. P art # size color Part Number Size Color FRAMING PACKAGE 4X3070JAMB 4.25" X 3070 White FRAMING PACKAGE Part4X30704X4070JAMB NumberJAMB 4.25''4.25" X 3070 X 4070 White White 4X4070JAMB 4.25'' X 4070Size White Overall Dimension 6X3070JAMB 6.25" X 3070 White DOOR SET 6X3070JAMB 6.25'' X 3070 White 6X40706X4070JAMBJAMB 6.25''6.25" X 4070 X 4070 White White DR (99 Series) (Alum) 3068 37 9/16" x 81 13/16" 8X30708X3070JAMBJAMB 8.25''8.25" X 3070 X 3070 White White DR48X4070 (99 JAMBSeries) (Alum) 8.25'' X 40704068 White 49 9/16" x 81 13/16" 8X4070JAMB 8.25" X 4070 White 66DR8X6070 (66JAMB Series) (Alum) 8.25'' X 6070 3068 White 37 1/4" x 81 1/4" 8X6070JAMB 8.25" X 6070 White 88DR (88Package Series) includes: (Steel) J a m bs, headers, threshold, 3068 door lever with40" keyed x 81 lock, 13/16" Package includes:hinges, Jambs,and weather headers, threshold,strip kit. door lever with keyed lock, hinges, and weather strip kit.
DOOR LEAF Part3070DOOR Number 3070Size 3' x 7' Overall Dimension DOOR LEAF 3070DOORW/LITE (window) 3070 3' x 7' DOOR SET 4070DOOR 4070 4' x 7' 3070DODR (99O Series)R (Steel)(door (Alum) only)(leaf) 3068 3070 37 9/16" 3' x X 81 7' 13/16" 4070DODR4 (99O RSeries) (Steel)(door (Alum) only)(leaf) 4068 4070 49 9/16"4' x X 81 7' 13/16" STEEL66DR DOOR (66 LEAF Series) ONLY (Alum) 3068 37 1/4" x 81 1/4" 88DR (88 Series) (Steel) 3068 40" x 81 13/16"
DOOR LEAF
D OO R SET Part3068DR3070DO NumbeO (SteelR (Steel)(door Jamb)r Size only)(leaf) 3068Overall3070 39 13/16" Dimensio 3' x X80 7' 5/8" n 4070DOOR (Steel)(door only)(leaf) 4070 4' X 7' DOO RS 4068DR (Aluminum Jamb) 4068 49 13/16" x 80 5/8"
3068DRKNOB * 3068 39 13/16" x 80 5/8" (Steel Jamb)
4068DR* 4068 49 13/16" x 80 5/8"
(Aluminum Jamb)
KNOBKNOBS SOLD SEPARATELY
TOUCH UP PAINT 4(color)SP 0.6oz bottle with brush 4ZZSP* 4.5oz spray can (backer paint) 12PURSP* 12oz spray can (purlin paint)
GEOCEL-TRIPOLYMER SEALANT GEO(color) 10.6 oz. tube clear, gray, white Qty: 24 per box
Note: Color caulking available in certain colors in Lowell. Contact salesperson for details.
RETRO-EASE
RETROEASE 300ft. roll
CENTRAL STATES MANUFACTURING, INC. 22 Effective 7/2013 • Information subject to change WINDOWS WD3X3 * 3x3 WD3X2 * 3x2 slider w/ screen non-insulated
Part Number Length Width Thickness
FLEXOVENT FLEXOVENT 10' 3" 1 1/2"
Qty: 2 10' rolls per box
*Longer lead times in Michigan City. Contact sales person for details. ACCESSORIES Part Number Length Width Thickness
BUTYL TAPE 40' per roll BT 40' 1/4" 3/16" BTR 40' 7/8" 3/16"
BT 20 rolls per box; BTR 10 rolls per box
GRAYFLEX Joint Seal Tape GRAYFLEX-6 20' 1" 1" **
10 rolls per box **Expanded size ACCESSORIES ACCESSORIES Part Number Siz e ACCESSORIES Part Number P art # Length W LENGTH idth ThicknessWIDTH THICKNESS TOUCH UP PAINT B U TYL TAPE Part 4(color)SPNumberBT Length 0.6oz W bottleidth with 40' brush Thickness 1/4" 3/16" BUTYL TAPE 4ZZSP BTR 4.5oz spray can (backer40" paint) 7/8" 3/16" 40'BUTYL per roll TA PE BT 12PURS P 40' 12oz spray can1/4" (purlin paint) 3/16" 40' per roll ACCESSORIES BT BT R 40' per 40' roll 40' 1/4" 7/8" 3/16" 3/16" ACCESSORIES BT R 40' 7/8" 3/16" PartBT 20 Number rolls per box; Length Width Thickness Part Number BTR 10 rolls per box; Length W idth BT 20Thickness rolls per box; BT 20 rolls BTR per 10 box; rolls per box BUTYL TAPE Part Number Size BTRColor 10 rolls per box BUTYL TAPE 40' per roll BT 40' 1/4" 3/16" 40' per roll BT 40' 1/4" 3/16" GEOC EL-TRIPOL YMER SEALANT BTRGRAYFLEX115 40' 15' 7/8" 3/16"1" 1 1/2" GRAYFLEX BT R 40' 7/8" 3/16" GRGRAYFLEXFLEX expanded size BT 20 rolls per box; JointJoint Seal TTapeape GRGRAYAYFLEX-6GEO(color)FLEX-6 * 20' 20' 10.6 1"oz. tub e1" 1" clea ** r, gray 1" ,** white J O INT BT 20BTR rolls 10 per rolls box; per box SEAL 24 rolls per box Qty: 24 per box BTR 10 rolls per box TAPE 10 rolls per10 boxrolls per box
**Expanded **Expanded size size GRAYFLEX GRAYJointFLEX Seal Tape Part GRNumberAYFLEX-6 Lengt 20' h 1" Siz e 1" ** Joint Seal Tape GRAYFLEX-6 20' 1" 1" ** UNIVERSAL POLYFOAM POLYG (with adhesive) 25' 1" x 1 1/2" UNIVERSAL POL YFOAM Part Number Siz e 10 rolls per box Part PO LY Number 25 ' Siz e 1"x1 1/2" 10 rolls per box **Expanded size **Expanded size TOUCH UP PAINT 20 rolls per bag TOUCH UP PAINT 4(color)SP 20 rolls per box 0.6oz bottle with brush 4ZZSP4(color)SP 4.5oz spray0.6oz can bottle (backer with paint) brush 12PURS4ZZSPP 12oz spray4.5oz can spray (purlin can paint) (backer paint)
12PURS PartP Number 12oz spray Siz can e (purlin paint) Part Number Siz e P art # size TOUCH UP PA IN T TOUCHTOUCH UP PAUPIN PAINTT Part Number4(color)SP4(color)SP Size 0.6oz Colorbottle0.6oz bottlewith brush with brush 4(color)SP 0.6oz bottle with brush Part Number4ZZSP12PURSP Size 4.5oz spray12oz spraycanColor (backer can (purlin paint) paint) GEOCEL-TRIPOLYMER SEALANT 4ZZSP12PURSP 4.5oz12oz spray spray can can(backer (purlin paint) paint) 12PURSP 12oz spray can (purlin paint) GE OC EL-TRIPOL YMER SEALANT GEO(color) * 10.6 oz. tube clear, gray, white
Qty: 24 per box GEO(color) * 10.6 oz. tube clear, gray, white Part Number Size Color Part Number Qty: 24Size per box Color GEOCEL-TRIPOLYMER GEO(color) 10.3oz tube clear, gray, white SEALANTGEOCEL-TRIPOLYMERPart SEALANTNumberMRS(color) Lengt h 10.3ozSize tube call for colors GEOCEL-TRIPOLYMER SEALANT MRSCLEAR 10.3oz tube clear UNIVERSAL POL YFOAM Part Number GEO(color) * Length 10.6 oz. tub e Sizeclea r, gray , white POLY GEO(color) * 25' 10.6 oz. tub e1"x1 1/2"clear, gray, white Qty: 24 per box Qty: 24 per box UNIVERSAL POLYFOAM 20 rolls per bag POLY 25' 1"x1 1/2"
Part Number Lengt h 20 rolls Sizper bage Part Number Length Size
UNIVERSAL POLYFOAM UNIVERSAL POL YFOAM POLY 25' 1"x1 1/2" POLY 25' 1"x1 1/2" 20 rolls per bag 20 rolls per bag
CENTRAL STATES MANUFACTURING, INC. Effective 7/2013 • Information subject to change 23 SUB-STRUCTURAL STEEL
CHANNEL ANGLE
CEE SYMMETRICAL ZEE LGSI ZEE
EAVE STRUT
Single Slope Up Single Slope Down Double Slope Up Double Slope Down
CENTRAL STATES MANUFACTURING, INC. 24 Effective 7/2013 • Information subject to change SUB-STRUCTURAL STEEL
Standard CEES & Symmetrical zees - Secondary Framing Members WEBxAxB Gauge Finish CEE Product Code ZEE Product Code 4x2x2 16 Red Oxide C4216R Z4216R 4x2.5x2.5 16 Red Oxide/Galvanized C42516R/C42516Z Z42516R/Z42516Z 4x2.5x2.5 14 Red Oxide C42514R Z42514R 4x3.5x3.5 14 Red Oxide C43514R Z43514R 16 Red Oxide C43516R Z43516R 6x2.5x2.5 6x2.5x2.5 16 Red Oxide C62516R Z62516R 14 Red Oxide C62514R Z62514R 8x2.5x2.5 8x2.5x2.5 16 Red Oxide/Galvanized C82516R/C82516Z Z82516R/Z82516Z 8x2.5x2.5 14 Red Oxide/Galvanized C82514R/C82514Z Z82514R/Z82514Z 12 Red Oxide/Galvanized C82512R/C82512Z Z82512R/Z82512Z 8x3.5x3.5 8x3.5x3.5 16 Red Oxide C83516R Z83516R 8x3.5x3.5 14 Red Oxide/Galvanized C83514R/C83514Z Z83514R/Z83514Z 12 Red Oxide/Galvanized C83512R/C83512Z Z83512R/Z83512Z 9x.3x3 9x3x3 14 Red Oxide C9314R Z9314R 12 Red Oxide/Galvanized C9312R/C9312Z Z9312R/Z9312Z 10x2.5x2.5 10x2.5x2.5 16 Red Oxide C102516R Z102516R 10x2.5x2.5 14 Red Oxide/Galvanized C102514R/C102514Z Z102514R/Z102514Z 12 Red Oxide/Galvanized C102512R/C102512Z Z102512R/Z102512Z 10x3.5x3.5 10x3.5x3.5 14 Red Oxide C103514R Z103514R 12 Red Oxide C103512R Z103512R 12x2.5x2.5 12x2.5x2.5 14 Red Oxide C122514R Z122514R 12 Red Oxide C122512R Z122512R 12x3.5x3.5 12x3.5x3.5 14 Red Oxide/Galvanized C123514R/C123514Z Z123514R/Z123514Z 12x4x4 12 Red Oxide/Galvanized C123512R/C123512Z Z123512R/Z123512Z 16 Red Oxide C12416R Z12416R
LGSI ZEES - Secondary Framing Members WEBxAxB Gauge Finish Product Code 6x23/8 x21/8 16 Red Oxide Z62516R 6x23/8 x21/8 14 Red Oxide Z62514R
8x23/8 x21/8 16 Red Oxide/Galvanized Z82516R/Z82516Z 8x23/8 x21/8 14 Red Oxide/Galvanized Z82514R/Z82514Z 8x23/8 x21/8 12 Red Oxide/Galvanized Z82512R/Z82512Z
8x33/8 x31/8 16 Red Oxide Z83516R 8x33/8 x31/8 14 Red Oxide Z83514R 8x33/8 x31/8 12 Red Oxide/Galvanized Z83512R/Z83512Z
10x23/8 x21/8 16 Red Oxide Z102516R 10x23/8 x21/8 14 Red Oxide Z102514R 10x23/8 x21/8 12 Red Oxide/Galvanized Z102512R/Z102512Z
10x27/8 x25/8 14 Red Oxide Z10314R 10x27/8 x25/8 12 Red Oxide Z10312R
12x23/8 x21/8 14 Red Oxide Z122514R 12x23/8 x21/8 12 Red Oxide Z122512R 12x33/8 x31/8 14 Red Oxide Z123514R 12x33/8 x31/8 12 Red Oxide/Galvanized Z123512R/Z123512Z 12x33/8 x35/8 16 Red Oxide Z12416R
Members can be manufactured to the nearest 1/8" in length from 6'0" to 45'0". For lengths under 6'0" or over 45'0", please call your sales rep.
CENTRAL STATES MANUFACTURING, INC. Effective 7/2013 • Information subject to change 25 SUB-STRUCTURAL STEEL
channels - Secondary Framing Members WEBxAxB Gauge Finish Product Code 4.25x2.35x2.35 16 Red Oxide/Galvanized U4216R
4.25x2.85x2.85 16 Red Oxide/Galvanized U42516R/ U42516R 4.25x2.85x2.85 14 Red Oxide U42514R
6.25x2.85x2.85 16 Red Oxide/Galvanized U62516R/ U62516Z 6.25x2.85x2.85 14 Red Oxide U62514R
8.25x2.85x2.85 16 Red Oxide/Galvanized U82516R/U82516Z 8.25x2.85x2.85 14 Red Oxide/Galvanized U82514R/U82514Z 8.25x2.85x2.85 12 Red Oxide/Galvanized U82512R/U82512Z
AngLE - Secondary Framing Members AxB Gauge Finish Product Code 2.5x2.5 14 Red Oxide B2514R
3x3 14 Red Oxide B314R 3x3 16 Red Oxide B316R
4x2 16 Red Oxide/Galvanized B4216R/B4216Z 4x2 14 Red Oxide B4214R
4x3 16 Red Oxide B4316R
Single Slope Up Single Slope Down EAVE STRUTS - Secondary Framing Members WEBxAxB Gauge Finish Product Code 6x4x3 16 Red Oxide E64316LR/E64316HR 6x4x3 14 Red Oxide E64314LR/E64314HR 6x4x3 12 Red Oxide E64312LR/E64312HR
8x4x3 14 Red Oxide/Galvanized E84314LR or HR/E84314LZ or HZ 8x4x3 12 Red Oxide/Galvanized E84312LR or HR/E84312LZ or HZ
8x5x3 12 Red Oxide E85312LR/E85312HR Double Slope Up Double Slope Down 8x5x3 14 Red Oxide E85314LR 8x5x5 14 Red Oxide E85514LR
10x5x3 14 Red Oxide E105314LR
Please specify pitch and slope when ordering.
Members can be manufactured to the nearest 1/8" in length from 6'0" to 45'0". For lengths under 6'0" or over 45'0", please call your sales rep.
CENTRAL STATES MANUFACTURING, INC. 26 Effective 7/2013 • Information subject to change Minimum Part Length 5’ total, 2’6” one end
Minimum PartSUB-STRUCTURAL Length 5’6” total, 2’8” one end STEEL HAT CHANNEL Gauge Finish Length Product Code 16 Red Oxide 20'0" HATR 20 Galvanized 20'0" HATZ
purlin clips Minimum Part Length 7 total, 3 6 one end3 ’ ’ ” 3 1 4 Gauge Finish Product Code 3 21 8 10 Red Oxide GIRTCLIP 2 4 16 Red Oxide MINICLIP 7 4 4
1 1 7 8 3 2 4 14 Galvanized BASECLIP 2 13 4 7 8 53 4 GIRTCLIP MINICLIP BASECLIP
Members can be manufactured to the nearest 1/8" in length from 6'0" to 45'0". For lengths under 6'0" or over 45'0", please call your sales rep.
CODE: ES4 CODE: ES5 EAVE STRUT FOR 4” LEG EAVE STRUT FOR 5” LEG
punch patterns Capabilities vary by location. Call for pricing and availability on special punching. 3" Minimum part length to be punched. CSMI standard hole sizes are 5/8" round and 5/8"x 3/4" slot in Lowell and Cedar Hill. Standard hole size in Jasper is 5/8"x 3/4" slot. HolesCODE: are punched ES134 to accommodate 1/2" diameter bolts. 5/16" angle punch offered in Lowell and Jasper. EAVE STRUT FOR 5” LEG NOTE: Minimum part length to be punched: 3’
CSMI standard hole sizes are 5/8” round and 5/8”x3/4” slot in Lowell and Cedar Hill. Standard hole size in Jasper is 5/8”x3/4” slot. Holes are punched to accommodate 1/2” diameter bolts. 5/16” angle punch offered in Lowell and Jasper.
CENTRAL STATES MANUFACTURING, INC. Effective 7/2013 • Information subject to change 27 SUB-STRUCTURAL STEEL
standard punch patterns CEES & zees
CODE:PPEP END PUNCH
CODE:PPSS Minimum Part Length 5’ total, 2’6” one end SIMPLE SPAN PUNCH - MINIMUM PART LENGTH 5' TOTAL, 2'6" ONE END Minimum Part Length 5’ total, 2’6” one end Minimum Part Length 5’ total, 2’6” one end Minimum PartMinimum Length 5Part’ total, Length 2’6” one5’ total, end 2’6” one end
Minimum Part Length 5’ total, 2’6” one end
CODE:PPSL Minimum Part Length 5’6” total, 2’8” one end SHORT LAP PUNCH - MINIMUM PART LENGTHMinimum 5'6" TOTAL, Part 2'8" Length ONE END5’6” total, 2’8” one end Minimum Part Length 5’6” total, 2’8” one end Minimum PartMinimum Length 5Part’6” total,Length 2’8 5”’ 6one” total, end 2’8” one end
Minimum Part Length 5’6” total, 2’8” one end
Minimum Part Length 7’ total, 3’6” one end CODE:PPLL Minimum Part Length 7’ total, 3’6” one end LONG LAP PUNCH - MINIMUM PART LENGTH 7' TOTAL,Minimum 3'6" ONE ENDPart Length 7’ total, 3’6” one end Minimum PartMinimum Length 7Part’ total, Length 3’6” one7’ total, end 3’6” one end
Minimum Part Length 7’ total, 3’6” one end
CODE: ES4 CODE: ES5 EAVE STRUT FOR 5 LEG EAVE STRUT FOR 4” LEG ” CODE: ES5 CODE: ES4 CODE: ES5 EAVE STRUT FOR 5” LEG CODE: ES4 EAVE STRUT FOR 4” LEG CODE: ES5 EAVE STRUT FOR 5” LEG CODE: ES4 CODE: ES5 EAVE STRUT FOR 5” LEG EAVE STRUT FORCODE: 4" LEG ES4 EAVE STRUTCODE: FOR ES4 4” LEG EAVE STRUT FCODE:OR 5" ES5 LEG CODE: ES5 EAVE STRUT FOR EA4” VELEG STRUT FOR 4” LEG EAVE STRUT FOR EA5” VELEG STRUT FOR 5” LEG
CODE: ES4 CODE: ES5 EAVE STRUT FOR 4” LEG EAVE STRUT FOR 5” LEG CODE: ES134 EAVE STRUT FOR 5” LEG CODE: ES134 NOTE: Minimum part EAVE STRUT FOR 5” LEG CODE: ES134 length to be punched:NOTE: 3’ Minimum part CODE: ES134EAVE STRUTCODE: FOR ES134 5” LEG length to beNOTE: punched: Minimum 3’ part CODE: ES134 EAVE STRUT FOR EA5” VELEG STRUT FOR 5” LEG NOTE:length MinimumNOTE: to be part punched: Minimum 3 ’part length to be lengthpunched: to be 3’ punched: 3’ EAVE STRUT FOR 5" LEG CODE: ES134 EAVE STRUT FOR 5” LEG NOTE: Minimum part CSMI standard hole sizes are 5/8” length to be punched: 3’ round and 5/8”x3/4” CSMIslot in standardLowell hole sizes are 5/8” and Cedar Hill. Standardround hole andCSMI size 5/8” x3/4standard” slot holein Lowell sizes are 5/8” in Jasper is 5/8”x3/4”and slot.CSMI Cedar Holes standardro undHill.CSMI andStandard hole 5/8standard sizes”x3/4 hole ar” holeeslot size5/8 in”sizes Lowell are 5/8” are punched to accommodateinro Jasperund and and 1/2is 5/8”5/8 Cedarro””undx3/4x3/4 andHill.”” slot.slot 5/8 Standard inHoles”x3/4 Lowell” slothole in size Lowell and Cedar Hill.and StandardCedar Hill. hole Standard size hole size diameter bolts. 5/16CSMI”ar angle standarde punched punchin Jasperhole to accommodate sizes is 5/8 are” x3/45/8”” 1/2 slot.” Holes offered in Lowell anddiameter Jasperin Jasper. ar bolts. eis punched5/8in 5/16Jasper”x3/4” angle”to isslot. accommodate 5/8 punch Holes”x3/4” slot. 1/2 Holes” round arande punched 5/8”x3/4ar to”e slot accommodatepunched in Lowell to accommodate 1/2” 1/2” and Cedaroffered Hill. indiameter Lowell Standard and bolts. hole Jasper 5/16 size.” angle punch diameteroffer bolts.diametered in5/16 Lowell” anglebolts. and punch5/16 Jasper” angle. punch in Jasperoffer ised 5/8 in” x3/4Lowelloffer” slot.ed and in Holes JasperLowell. and Jasper. are punched to accommodate 1/2” diameter bolts. 5/16 angle punch CENTRAL” STATES MANUFACTURING, INC. 28 offered in Lowell andEffective Jasper 7/2013. • Information subject to change SUB-STRUCTURAL STEEL
CODE: PPA PATTERN A - STANDARD WEB - 9' MINIMUM LENGTH IF PUNCHED ON BOTH ENDS; 4'6" IF PUNCHED ON ONE END.
Minimum Part Length Minimum Part Length Minimum Part Length if Punched on Both Ends: 9’ if PunchedMinimum on Both Ends:Part Lengt 9’ h if Punched on Both Ends: 9’ if Punched on One End: 4’6” Minimumif Punched Partif Lengt Punched on Oneh onEnd: Both 4’6” Ends: if9’ Punched on One End: 4’6” if Punched on Bothif Punched Ends: 9’ on One End: 4’6” Minimum Part Length if Punched on One End: 4’6” if Punched on Both Ends: 9’ if Punched on One End: 4’6” CODE: PPB PATTERN B - STANDARD WEB - 12'5" MINIMUM LENGTH IF PUNCHED ON BOTH ENDS; 6'2.5" IF PUNCHED ON ONE END.
Minimum Part Length Minimum Part Length Minimum Part Length if Punched on Both Ends: 12’5” if Punched onMinimum Both Ends: Part 12’5” Lengthif Punched on Both Ends: 12’5” if Punched on One End: 6’2.5” Minimumif Punched Partif Punched Lengt on Oneh on End: Both 6’2.5” Ends: 12’5”if Punched on One End: 6’2.5” if Punched on Bothif PunchedEnds: 12’5” on One End: 6’2.5” Minimum Part Length if Punched on One End: 6’2.5” if Punched on Both Ends: 12’5” if Punched on One End: 6’2.5”
CODE: PPC PATTERN C - STANDARD WEB - 7' MINIMUM LENGTH IF PUNCHED ON BOTH ENDS; 3'6" IF PUNCHED ON ONE END.
Minimum Part Length Minimum Part Length Minimum Part Length if Punched on Both Ends: 7’ if PunchedMinimum on Both Ends:Part Lengt 7’ h if Punched on Both Ends: 7’ if Punched on One End: 3’6” Minimumif Punched Partif Lengt Punched on Oneh onEnd: Both 3’6” Ends: if7’ Punched on One End: 3’6” if Punched on Bothif Punched Ends: 7’ on One End: 3’6” Minimum Part Length if Punched on One End: 3’6” if Punched on Both Ends: 7’ if Punched on One End: 3’6”
CODE: PPD & PPE PATTERN D & E OPTIONAL FLANGE - PATTERN D FOR USE WITH PATTERN A; PATTERN E FOR USE WITH PATTERN B
CODE: PPF CODE: PPH PATTERN F OPTIONAL FLANGE - PATTERN F FOR USE WITH PATTERN C PATTERN H STANDARD WEB END
NOTE:NOTE: Minimum Minimum NOTE: Minimum partNOTE: lengthpart length Minimum to to part length to be punched: 3 NOTE: Minimumbe punched:part length 3’ to’ be punched: 3’ part length tobe punched: 3’ NOTE: Minimum be punched: 3’ part length to be punched: 3’ Visit www.loseke.com for the Light Gauge Structural Steel framing system design handbook. Visit www.loseke.com for the LightVisit Gauge www Structural.loseke.com Steel for framingthe Light system Gauge design Structural handbook. Steel framing system design handbook. Visit www.loseke.com for the Light Gauge Structural Steel framing system design handbook. Visit www.loseke.com for the Light Gauge Structural Steel framing system design handbook. Visit www.loseke.com for the Light Gauge Structural Steel framing system design handbook. CENTRAL STATES MANUFACTURING, INC. Effective 7/2013 • Information subject to change 29 WARRANTIES PRIME 40 YEAR LIMITED PAINT WARRANTY FOR CENTRAL STATES MANUFACTURING (CSM) PANEL-LOC, PANEL-LOC PLUS, 3) Claims under this warranty must be made in writing to CSM at the address R-LOC, HORIZON-LOC, M-LOC, CENTRAL-LOC AND CENTRAL SEAM PLUS STEEL set forth below within 30 days after the discovery of the defect. The notice to ROOFING AND SIDING PANELS. THIS WARRANTY COVERS PRIME MATERIAL ONLY. CSM shall include adequate identification of the material involved, nature of THRIFTY MATERIAL IS COVERED BY A SEPARATE WARRANTY. the claimed defect, date of the installation, date of shipment and order number. Failure of the claimant to provide such information in the time provided shall be CSM warrants that the color-coated finish applied to its steel roofing and siding deemed as a waiver of the claimant’s rights herein. CSM shall have an additional panels will not, within a period of forty years after installation or forty years and 30 days to inspect the CSM steel roofing and siding panels before any further one month after the date of shipment (whichever comes first), crack, check, peel action shall be taken. or lose adhesion. This does NOT include minute fracturing, which may occur in proper fabrication of the building parts. Failure due to substrate corrosion is 4) CSM does not warrant or guarantee the interior or reversed side finish or excluded. prepainted materials used for interior application.
CSM also warrants that the color-coated finish applied to its steel roofing and 5) CSM does not warrant or guarantee claims arising from damage to panels due siding panels will not, within a period of thirty years after installation or a period to exposure to salt and salt water, water spray, corrosive or harmful chemicals of thirty years and one month after the date of shipment (whichever comes (whether solids, liquids or gases), airborne contaminants, hail or other agents of first), chalk or lose color according to the following grids. Additionally, chalk a similar nature. ratings are measured in accordance with the standard procedures specified in ASTM-D-4214-98 method D659. Color (fade) ratings are measured in accordance 6) CSM does not warrant or guarantee claims arising from the following: with the standard procedures specified in ASTM-D-2244-02. Color change shall a) Damage or defects caused by acts of God, falling objects, external be measured on an exposed painted surface that has been cleaned of surface forces, explosion, fire, riots, civil commotion, acts of war, excessive soils and chalk, and the corresponding values measured on the original or radiation, or other similar or dissimilar occurrences beyond CSM’s unexposed painted surface. It is understood that fading or color changes may control. not be uniform if the surfaces are not equally exposed to the sun and elements. b) Minor hairline cracking of the paint finish. c) Defects or damages to the painted steel roofing and siding panels caused by handling, shipping, transit, processing, storage or Sidewall Roof installation; damage due to failure of the substrate. Color Chalk Color Chalk d) Damage caused by moisture or other contamination prior to 5 8 6 7 installation. e) Steel shavings or minute iron particles from sawing sparks that come (Exception: Gallery Blue - Sidewall: Color: 8/Chalk: 6, Roof: Color: 10/Chalk: 5). in contact with the painted surface. f) Non-vertical panels that don’t have an adequate degree of pitch so as 1) DISCLAIMER OF WARRANTY not to allow any free standing or accumulation of standing water. THE EXPRESS WARRANTY STATED HEREIN IS THE EXCLUSIVE WARRANTY g) Stored or installed in a way that allows for contact with animals or APPLICABLE TO CSM PANEL-LOC, PANEL-LOC PLUS, R-LOC, HORIZON-LOC, animal waste. M-LOC, CENTRAL-LOC AND CENTRAL SEAM PLUS PRIME PAINTED MATERIAL h) Deterioration to the panels caused directly or indirectly by panel ONLY, ROOFING AND SIDING PANELS. CSM MAKES NO WARRANTIES OR contact with fasteners. The selection of suitable fasteners rests solely GUARANTEES, EITHER EXPRESSED OR IMPLIED, BEYOND THE FACE HEREOF with the buyer. INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND i) Weather uniformity under non-uniform conditions. FITNESS FOR A PARTICULAR PURPOSE. CSM SHALL HAVE NO OTHER LIABILITY j) Unusual harmful fumes, chemically aggressive environment, foreign WITH RESPECT THERETO. This warranty will apply to those panels refinished substances in the atmosphere, standing water or direct salt spray. or replaced but only for the period of time left on the original warranty. No k) Damage due to green, wet or treated lumber. employee or representative of CSM is authorized to change this limited warranty in any way or grant any other warranty regarding the product. 7) The warranty applies to panels installed in the continental United States, Alaska, and Canada. 2) LIMITATION OF LIABILITY THE EXCLUSIVE REMEDY FOR ANY AND ALL CLAIMS ARISING FROM THIS LIMITED 8) CSM extends this warranty solely to the buyer. This warranty is not transferable WARRANTY SHALL BE LIMITED TO CSM REFINISHING OR REPLACING DEFECTIVE and non-assignable. Further, it is applicable only to the original owner of any PANELS OR REFUNDING THE PURCHASE PRICE OF SUCH PANELS AS CSM SHALL structure where the material is installed. ELECT. CSM SHALL NOT BE LIABLE FOR ANY LOSSES, DAMAGES, OR EXPENSES, WHETHER DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. IF OUR CENTRALGUARD™ SILICONIZED POLYESTER COATINGS FAIL TO COMPLY WITH OUR LIMITED WARRANTY, WE WILL PAY FOR THE LABOR AND THE MATERIALS REASONABLY NECESSARY TO REPAINT, REPAIR OR REPLACE, AT OUR OPTION, THE BUILDING PART SHOWING THE FAILURE. CSM’S TOTAL LIABILITY IS EXPRESSLY LIMITED TO THE PURCHASE PRICE OF THE CSM STEEL ROOFING AND SIDING PANELS.
CENTRAL STATES MANUFACTURING, INC. 30 Effective 7/2013 • Information subject to change WARRANTIES Painted GALVALUME 20 Year® Substrate Warranty Central States Manufacturing (CSM) warrants that steel sheets coated with Some states do not allow the exclusion or limitation of incidental or hot-dipped aluminum-zinc alloy AZ50 or Galvalume® AZ50 and sold for use as consequential damages, so this limitation or exclusion may not apply in your painted steel roofing and siding panels, if erected in the United States, WILL NOT state. This warranty provides specific legal rights and other rights which vary rupture, fail structurally or perforate within a period of twenty (20) years after from state to state that may apply. shipment due to exposure to normal atmospheric corrosion. Central States Manufacturing’s liability for breach of this warranty shall be limited This warranty DOES NOT APPLY to sheets exposed at any time to corrosive or exclusively to the cost of either repairing non-conforming, rupturing, perforating aggressive atmospheric conditions, including but not limited to: or structurally failing panels, or at CSM’s sole option, of furnishing FOB Buyer’s • Areas subject to salt water marine atmospheres or to constant spraying of plant sufficient sheet product to enable Buyer to fabricate replacement panels either salt or fresh water. for the non-conforming, rupturing, perforating or structurally failing panels. CSM • Areas subject to fallout or exposure to corrosive chemicals, fumes, ash, shall not in any event be liable for the cost of labor expended by others on any cement dust or animal waste. non-conforming, rupturing, perforating or structurally failing sheet or for any • Areas subject to water run-off from lead or copper flashings or areas in special, indirect, or consequential loss of profits or any other incidental, general, metallic contact with lead or copper. special or compensatory damages to anyone by reason of the fact that such • Conditions/circumstances where corrosive fumes or condensates are panels shall have been non-conforming, rupturing, perforating, or structurally generated or released inside the building. failing.
This warranty DOES NOT APPLY in the event of: Claims under this warranty must be made in writing to Central States • Mechanical, chemical or other damage sustained during shipment, storage, Manufacturing at the address set forth below within 30 days after discovery of erection, or after erection. the defect. CSM shall have an additional 30 days to inspect the steel roofing and • Failure to provide free drainage of water, including internal condensation siding panels before any further action shall be taken. Adequate identification from overlaps and all other surfaces of the sheets or panels. of material involved in the claim, including date of installation, order number, • Failure to remove debris from overlaps and all other surfaces of the sheets invoice number and date of shipment must be established by the Buyer. or panels. • Damage caused to the metallic coating by improper scouring or cleaning Buyer shall exercise diligence in inspection of sheets as received from CSM so procedures. as to mitigate repair or replacement. CSM extends this warranty solely to the • Deterioration of the panels caused by contact with green or wet lumber, or original owner of any structure where the material is installed. This warranty is storage stain caused by water damage or condensation. not transferable and non-assignable. CSM reserves the right to terminate this • Presence of damp insulation or other corrosive materials in contact with or warranty at any time (except as to orders already accepted) upon the giving of close proximity to the panel. written notice thereof. • Deterioration to the panels caused directly or indirectly by panel contact with concrete, asphalt, gravel, dirt, mulch, or any corrosive material. The Law of the State of Arkansas shall govern the rights and duties of the parties • Deterioration of the panels caused directly or indirectly by panel contact under this agreement and jurisdiction and venue is fixed in Benton County, with fasteners. Selection of suitable long-lasting fasteners to be used with Arkansas. Galvalume roofing and siding panels rests solely with the Buyer. • A degree of bending less than 2T for sheet gauges up to 0.030 in. and CENTRAL STATES MANUFACTURING MAKES NO GUARANTEES, EITHER degree of bending less than 4T for sheet gauges 0.031 in. and thicker. EXPRESSED OR IMPLIED BEYOND THE FACE HEREOF, INCLUDING, WITHOUT • Slopes of roof or sections of the roof flatter than 1/4:12. LIMITATION, WARRANTIES OF FITNESS AND MERCHANTABILITY, AND SHALL HAVE NO OTHER LIABILITY WITH RESPECT THERETO. This warranty shall be subject to the stipulations, limitations and conditions hereinafter set forth.
The remedy for any claims on steel roofing and siding panels shall be at the discretion of Central States Manufacturing and shall be limited to refinishing or replacing the defective panels.
CENTRAL STATES MANUFACTURING SHALL NOT BE LIABLE FOR ANY LOSSES, DAMAGES OR EXPENSES WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL, CAUSED BY OR RESULTING FROM THE USE OF DEFECTIVE OR NON-CONFORMING STEEL ROOFING AND SIDING PANELS OR FOR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. CENTRAL STATES MANUFACTURING’S TOTAL LIABILITY IS EXPRESSLY LIMITED TO THE PURCHASE PRICE OF THE STEEL ROOFING AND SIDING PANELS PROVIDED BY CENTRAL STATES MANUFACTURING.
CENTRAL STATES MANUFACTURING, INC. Effective 7/2013 • Information subject to change 31 Lowell, AR Michigan City, IN Cedar Hill, TX Mount Airy, NC Jasper, AL Hartford, SD 800-356-2733 800-638-2565 800-210-8305 877-813-2111 866-270-6608 877-361-4763 www.centralstatesmfg.com