This is to attest that
MODERN TECHNOLOGY LABORATORIES HARAMAIN ROAD, KILO 45, P.O. BOX 4869 JEDDAH 21412, KINGDOM OF SAUDI ARABIA
Testing Laboratory TL-576 has met the requirements of AC89, IAS Accreditation Criteria for Testing Laboratories, and has demonstrated compliance with ISO/IEC Standard 17025:2017, General requirements for the competence of testing and calibration laboratories. This organization is accredited to provide the services specified in the scope of accreditation.
Effective Date March 15, 2019
President
MODERN TECHNOLOGY LABORATORIES www.mtl-ksa.com
Contact Name Ahmed Barasin Contact Phone +966-12-2888939 Accredited to ISO/IEC 17025:2017 Effective Date March 15, 2019
CMT AASHTO M-145-914 Standard specification for classification of soils and soil-aggregate mixtures for (2012) highway construction purposes ACI 207 Guide to mass concrete ASTM A370 Standard test methods and definitions for mechanical testing of steel products ASTM A615 Standard specification for deformed and plain carbon-steel bars for concrete reinforcement ASTM C31/C31M -12 Standard practice for making and curing concrete test specimens in the field ASTM C39/C39M Standard test method for compressive strength of cylindrical concrete specimens ASTM C109/ C109M Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens) ASTM C114-11b Standard test methods for chemical analysis of hydraulic cement (clauses 5.2, 5.2.1, 5.4) ASTM C117-13 Standard test method for materials finer than 75-μm (no. 200) sieve in mineral aggregates by washing ASTM C127 Standard test method for relative density (specific gravity) and absorption of coarse aggregate ASTM C128 Standard test method for relative density (specific gravity) and absorption of fine aggregate ASTM C131/C131M Standard test method for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine ASTM C136/C136M Standard test method for sieve analysis of fine and coarse aggregates ASTM C138/C138M Standard test method for density (unit weight), yield, and air content (gravimetric) of concrete ASTM C143/C143M-12 Standard test method for slump of hydraulic-cement concrete ASTM C151/C151M Standard test method for autoclave expansion of hydraulic cement ASTM C191 Standard test methods for time of setting of hydraulic cement by vicat needle ASTM C204 Standard test methods for fineness of hydraulic cement by air-permeability apparatus
TL-576 MODERN TECHNOLOGY LABORATORIES Page 2 of 5
ASTM C231/C231M Standard test method for air content of freshly mixed concrete by the pressure method ASTM C403/C403M-08 Standard test method for time of setting of concrete mixtures by penetration resistance ASTM C469/C469M Standard test method for static modulus of elasticity and poisson’s ratio of concrete in compression ASTM C1064/C1064M Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete ASTM C1202 Standard test method for electrical indication of concrete's ability to resist chloride ion penetration ASTM C1610/C1610M Standard test method for static segregation of self-consolidating concrete using column technique ASTM C1611/C1611M Standard test method for slump flow of self-consolidating concrete ASTM C1621/C1621M Standard test method for passing ability of self-consolidating concrete by j-ring ASTM D1556/D1556M Standard test method for density and unit weight of soil in place by sand-cone method ASTM D1557 Standard test methods for laboratory compaction characteristics of soil using modified effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) ASTM D1993 - 03(2013) Standard test method for precipitated silica-surface area by multipoint BET nitrogen adsorption ASTM D5550 Standard test method for specific gravity of soil solids by gas pycnometer ASTM E70-07(2015) Standard test method for pH of aqueous solutions with the glass electrode ASTM E415 Standard test method for analysis of carbon and low-alloy steel by spark atomic emission spectrometry ASTM E1086 Standard test method for analysis of austenitic stainless steel by spark atomic emission spectrometry BS 1881-122 Testing concrete - method for determination of water absorption ISO 7888 Water quality - determination of electrical conductivity Structural ASTM A36 Standard Specification for Carbon Structural Steel ASTM A48 Standard Specification for Gray Iron Castings ASTM A74 Standard Specification for Cast Iron Soil Pipe and Fittings ASTM A90 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings ASTM A106 Standard Specification for Seamless Carbon Steel Pipe for High Temperature Service ASTM A123 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
TL-576 MODERN TECHNOLOGY LABORATORIES Page 3 of 5
ASTM A193 Standard Specification for Alloy-Steel and Stainless-Steel Bolting for High Temperature or High-Pressure Service and Other Special Purpose Applications ASTM A194 Standard Specification for Carbon Steel, Alloy Steel, and Stainless-Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both ASTM A240 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A416/A416M-12a Standard specification for low-relaxation, seven-wire steel strand for prestressed concrete ASTM A563 Standard Specification for Carbon and Alloy Steel Nuts ASTM A572 Standard Specification for High-Strength Low-Alloy Columbium Vanadium Structural Steel ASTM A1061/A1061M-09 Standard test methods for testing multi-wire steel prestressing strand ASTM B42 Standard Specification for Seamless Copper Pipe, Standard Sizes ASTM B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes ASTM B187 Standard Specification for Copper, Bus Bar, Rod, and Shapes and General- Purpose Rod, Bar, and Shapes ASTM B221 Standard Specification for Aluminum and aluminum Alloy Extracted Bars, rods, wire, Profiles and Tubes (Metric)1 ASTM B241 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube ASTM B308 Standard Specification for Aluminum -Alloy 6061-T6 standard Structural Profile ASTM B763 Standard Specification for Copper Alloy Sand Castings for Valve Applications ASTM C947 Standard Test Method for Flexural Properties of Thin-Section Glass Fiber- Reinforced Concrete (Using Simple Beam with Third-Point Loading) ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials ASTM E328 Standard test methods for stress relaxation tests for materials and structures ASTM E1251 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry ASTM E1999 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry ASTM F606 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets ASTM F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength ASTM F3125 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
TL-576 MODERN TECHNOLOGY LABORATORIES Page 4 of 5
BS EN 573-3 Aluminum and Aluminum Alloys - Chemical Composition and Form of Wrought Products - Part 3: Chemical Composition and Form of Products BS EN 10025 Hot rolled products of structural steels-Part 2: Technical delivery conditions for non-alloy structural steels BS EN 14411 Ceramic tiles. Definition, classification, characteristics, assessment and verification of constancy of performance and marking BS EN 15079 Copper and Copper Alloys - Analysis by Spark Optical Emission Spectrometry (S-OES) ISO 898-1 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread ISO 898-2 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
TL-576 MODERN TECHNOLOGY LABORATORIES Page 5 of 5