Hazmat and Enviro Drysuits

Total Page：16

File Type：pdf, Size：1020Kb

HAZMAT AND ENVIRO DRYSUITS HAZMAT HAZMAT AND ENVIRO DRYSUITS For Contaminated Water Diving Aqua Lung/Whites HAZMAT and ENVIRO drysuits are field-proven for use in the most demanding conditions. CE approved and extensively tested, these drysuits are used by numerous professional dive teams around the world. HAZMAT DRYSUIT FEATURES Choose HAZMAT for Contaminated Water Diving STANDARD FEATURES • Chemically-resistant polyurethane (multi-laminate) inner & outer layers • Interior and exterior tape welded seams • Tear and puncture resistant nylon core • Attached dry glove rings & replaceable wrist seals • Contaminated water dual exhaust & standard inflation valves • Easy to clean and decontaminate • 14 stock sizes and Made-To-Measure (MTM): see online size chart • Standard colour: red/black. Also available in black/black • CE approved to standard EN14225-2 Complete list of chemical testing available upon HAZMAT COM request (COMMERCIAL HAZMAT DIVER) STANDARD FEATURES AS ABOVE PLUS • Heavy duty attached poly boots • Choice of attached helmet yoke: Gorski, Kirby Morgan, Miller, Desco HAZMAT PS (PUBLIC SAFETY HAZMAT DIVER) STANDARD FEATURES AS ABOVE PLUS • Comfort boots with 7mm liner HAZMAT PS drysuit • Attached Polytex hood (with liner) and neck seal with attached hood • OPTIONAL SLT SYSTEM ENVIRO DRYSUIT Choose ENVIRO for use in Moderately Contaminated Water FEATURES • Chemically-resistant polyurethane outer layer • Exterior tape welded seams www.aqualung.com/militaryandprofessional • Tear and puncture resistant nylon inner • Attached dry glove rings & replaceable wrist seals • Standard exhaust & inflation valves • Comfort boots with 7mm liner • Attached Polytex hood and neck seal • 14 stock sizes and Made-To-Measure Item Description Part # HAZMAT COM - Red (stock size) 611987 Diver in Aqua Lung G3000SS Diving Helmet, HAZMAT COM HAZMAT COM - MTM - Red (MTM) 611988 drysuit, H3 Diving Harness HAZMAT PS - Red (stock size) 611983 I T S S U P E C HAZMAT PS - Red (MTM) 611984 Y I A R L D I E S H T S ENVIRO - Red (stock size) 611216 T ENVIRO - PS Red (MTM) 612215 Aqua Lung international distributor network details are listed at: www.aqualung.com/militaryandprofessional.

Copy Link

Recommended publications

Review of Diver Noise Exposure
doi:10.3723/ut.29.021 International Journal of the Society for Underwater Technology, Vol 29, No 1, pp 21–39, 2010 Review of diver noise exposure TG Anthony, NA Wright and MA Evans QinetiQ Ltd, Hampshire, UK Technical Paper Abstract • Assess the risk to all employees, including divers, Divers are exposed to high noise levels from a variety from noise at work of sources both above and below water. The noise • Take action to reduce the noise exposure that exposure should comply with `The Control of Noise produces these risks at Work Regulations 2005' (CoNaWR05, 2005). A • Provide hearing protection if the noise risk detailed review of diver noise exposure is presented, cannot be reduced sufficiently by other methods encompassing diver hearing, noise sources, exposure • Ensure legal limits on noise exposure are not levels and control measures. Divers are routinely exceeded exposed to a range of noise sources of sufficiently high • Provide employees with information, instruction intensity to cause auditory damage, and audiometric and training studies indicate that diver hearing is impaired by • Conduct health surveillance where there is a risk exposure to factors associated with diving. Human to health. hearing under water, in cases where the diver's ear is The CoNaWR05 requires employers to take wet, is less sensitive than in air and should be assessed specific action at certain noise action values. These using an underwater weighting scale. Manufacturers of relate to the levels of exposure to noise of divers diving equipment and employers of divers have a joint averaged over a working day or week and the responsibility to ensure compliance with the exposure maximum noise (peak sound pressure) to which values in the CoNaWR05, although noise is only one they may be exposed.
[Show full text]
History of Scuba Diving About 500 BC: (Informa on Originally From
History of Scuba Diving nature", that would have taken advantage of this technique to sink ships and even commit murders. Some drawings, however, showed different kinds of snorkels and an air tank (to be carried on the breast) that presumably should have no external connecons. Other drawings showed a complete immersion kit, with a plunger suit which included a sort of About 500 BC: (Informaon originally from mask with a box for air. The project was so Herodotus): During a naval campaign the detailed that it included a urine collector, too. Greek Scyllis was taken aboard ship as prisoner by the Persian King Xerxes I. When Scyllis learned that Xerxes was to aack a Greek flolla, he seized a knife and jumped overboard. The Persians could not find him in the water and presumed he had drowned. Scyllis surfaced at night and made his way among all the ships in Xerxes's fleet, cung each ship loose from its moorings; he used a hollow reed as snorkel to remain unobserved. Then he swam nine miles (15 kilometers) to rejoin the Greeks off Cape Artemisium. 15th century: Leonardo da Vinci made the first known menon of air tanks in Italy: he 1772: Sieur Freminet tried to build a scuba wrote in his Atlanc Codex (Biblioteca device out of a barrel, but died from lack of Ambrosiana, Milan) that systems were used oxygen aer 20 minutes, as he merely at that me to arficially breathe under recycled the exhaled air untreated. water, but he did not explain them in detail due to what he described as "bad human 1776: David Brushnell invented the Turtle, first submarine to aack another ship.
[Show full text]
Miller Manual
MILLER DIVING EQUIPMENT INC. Miller 400 Diving Helmet Maintenance Manual © Miller Diving All Rights Reserved Document # 030715001 1 MILLER 400 DIVING HELMET OPERATIONS AND MAINTENANCE MANUAL Part # 100-900 TABLE OF CONTENTS WARRANTY ............................................................................................................................... 3 DEFINITIONS OF SIGNAL WORDS ........................................................................................ 4 IMPORTANT SAFETY INFORMATION .................................................................................. 5 SECTION 1: GENERAL INFORMATION 1-A INTRODUCTION ............................................................................................. 7 1-B GENERAL DESCRIPTION OF MILLER 400 ................................................ 7 SECTION 2: OPERATING INSTRUCTIONS AND PROCEDURES 2-A PRE-DIVE PROCEDURE .................................................................................8 2-B DRESSING INTO THE MILLER HELMET ....................................................8 2-C OPERATING INSTRUCTIONS .......................................................................9 2-D EMERGENCY PROCEDURES ........................................................................9 2-E RECOMMENDED MATERIALS FOR MAINTENANCE .............................10 SECTION 3: DESCRIPTIONS, MAINTENANCE AND REPLACEMENT 3-A HELMET SHELL ..............................................................................................12 3-B FACE PLATE AND FACE RING .....................................................................12
[Show full text]
Carbon Dioxide & Diving Apparatus
Carbon Dioxide & Diving Apparatus Carbon Dioxide & Diving Apparatus Testing for Re-Inspired Carbon Dioxide Mike F. Ward February 26, 2020 © Copyright 2020 Dive Lab® Inc. All rights reserved. 1 Rev. February 25, 2020 Carbon Dioxide & Diving Apparatus SECTION ONE PAGES 1.0 Understanding CO2 & Diving 1.1 Understanding the Effects of CO2 1.2 CO2 Production 1.3 Breathing Rate/ Work Rate 1.4 Re-inspired CO2 1.5 Primary Factors Influencing Re-inspired CO2 1.6 Dead Space 1.7 Gas Flow Path 1.8 Breathing Resistance 1.9 Improper Ventilation 1.10 Symptoms of CO2 Exposure 1.11 Minimizing CO2 for the Diver 1.12 Summary SECTION TWO 2.0 Measuring Re-inspired CO2 Concept 2.1 Breathing Rate/Work Rate 2.2 Primary Factors Influencing Re-inspired CO2 using a Breathing Simulator 2.3 Dead Space 2.4 Gas Flow Path 2.5 Breathing Resistance SECTION THREE 3.0 Basic Test Configuration 3.1 CO2 Sampling 3.2 System Calibration 3.3 CO2 Expression 3.4 CO2 Injection 3.5 Stabilizing End Tidal 3.6 Sample Delay 3.7 Understanding the Test Loop 3.8 Sample Catheter SECTION FOUR 4.0 European CE Breath by Breath Washout Testing © Copyright 2020 Dive Lab® Inc. All rights reserved. 2 Rev. February 25, 2020 Carbon Dioxide & Diving Apparatus ALPM Actual Liters Per Minute ATA Atmospheres Absolute - 1 ATA=14.7 psig BAR Bar - one bar = 14.5 psig BPM Breaths Per Minute CE Symbol for European Conformance ET End Tidal - the end of exhalation where gas flow stops ET CO2 End Tidal Carbon Dioxide - the level of CO2 in exhaled gas at the very end of exhalation EU European Union FSW Feet Sea Water J/L Joules Per Liter LPM Liters Per Minute MBR MILLIBARS - pressure measurement often used for atmospheric pressure readings and partial pressure reading of gases within a mixture of gases MSW Meter Sea Water PSI Pounds Per Square Inch PSIG Pounds Per Square Inch Gauge RMV Respiratory Minute Volume - the volume of gas moved in and out of the lungs in one minute.
[Show full text]
Mark V Diving Helmet
Historical Diver, Number 5, 1995 Item Type monograph Publisher Historical Diving Society U.S.A. Download date 06/10/2021 19:38:35 Link to Item http://hdl.handle.net/1834/30848 IDSTORI DIVER The Offical Publication of the Historical Diving Society U.S.A. Number 5 Summer 1995 "Constant and incessant jerking and pulling on the signal line or pipe, by the Diver, signifies that he must be instantly pulled up .... " THE WORLDS FIRST DIVING MANUAL Messrs. C.A. and John Deane 1836 "c:lf[{[J a:tk o{ eadz. u.adn l;t thi:1- don't di£ wllfzoul fz.a1Jin5 Co't'towe.J, dofen, pwu!.hau:d O'l made a hefmd a{ :toorh, to gfimju.e (o'r. !JOU'tul{ thl:1 new wo'l.fJ''. 'Wifl'iam 'Bube, "'Beneath 'J,opic dlw;" 1928 HISTORICAL DIVING SOCIETY HISTORICAL DIVER MAGAZINE USA The official publication of the HDSUSA A PUBLIC BENEFIT NON-PROFIT CORPORATION HISTORICAL DIVER is published three times a year C/0 2022 CLIFF DRIVE #119 by the Historical Diving Society USA, a Non-Profit SANTA BARBARA, CALIFORNIA 93109 U.S.A. Corporation, C/0 2022 Cliff Drive #119 Santa Barbara, (805) 963-6610 California 93109 USA. Copyright© 1995 all rights re FAX (805) 962-3810 served Historical Diving Society USA Tel. (805) 963- e-mail HDSUSA@ AOL.COM 6610 Fax (805) 962-3810 EDITORS: Leslie Leaney and Andy Lentz. Advisory Board HISTORICAL DIVER is compiled by Lisa Glen Ryan, Art Bachrach, Ph.D. J. Thomas Millington, M.D. Leslie Leaney, and Andy Lentz.
[Show full text]
FIU-DOM-01 Revision-1 12/2019 10
FIU-DOM-01 Revision -1 12/2019 1 11200 SW 8th Street, Miami Florida, 33199 http://www.fiu.edu TABLE of CONTENTS Section 1.00 GENERAL POLICY 6 1.10 Diving Standards 6 1.20 Operational Control 7 1.30 Consequence of Violation of Regulations by divers 9 1.40 Job Safety Analysis 9 1.50 Dive Team Briefing 10 1.60 Record Maintenance 10 Section 2.00 MEDICAL STANDARDS 11 2.10 Medical Requirements 11 2.20 Frequency of Medical Evaluations 11 2.30 Information Provided Examining Physician 11 2.40 Content of Medical Evaluations 11 2.50 Conditions Which May Disqualify Candidates from Diving (Adapted from Bove, 1998) 11 2.60 Laboratory Requirements for Diving Medical Evaluation and Intervals 12 2.70 Physician's Written Report 13 Section 3.00 ENTRY-LEVEL REQUIRMENTS 14 3.10 General Policy 14 Section 4.00 DIVER QUALIFICATION 14 4.10 Prerequisites 14 4.20 Training 15 4.30 FIU Working Diver Qualification 18 4.40 External (Non-FIU Employee) Diver Qualifications 18 4.50 Depth Certifications 22 4.60 Continuation of FIU Working Diver Certification 22 4.70 Revocation of Certification or Designation 23 4.80 Requalification After Revocation of Diving Privileges 23 4.90 Guest Diver 23 Section 5.00 DIVING REGULATIONS FOR SCUBA (OPEN CIRCUIT, COMPRESSED AIR) 24 5.10 Introduction 24 5.20 Pre-Dive Procedures 24 5.30 Diving Procedures 25 5.40 Post-Dive Procedures 30 5.50 Emergency Procedures 30 5.60 Flying After Diving or Ascending to Altitude (Over 1000 feet) 30 5.70 Record Keeping Requirements 30 FIU-DOM-01 Revision-1 12/2019 2 Section 6.00 SCUBA DIVING EQUIPMENT 32
[Show full text]
Leatherback Report Ana Bikik Odyssey Marine Technical Diving Illumination
Funky Gifts for Folks with Fins ... GirlDiver: Yoga & Diving Papua Leatherback Report Portfolio GLOBAL EDITION May 2009 Number 29 Ana Bikik Profile Odyssey Marine Tech Talk Technical Diving BIKINI ATOLL & KWAJALEIN ATOLL Photography Illumination Pacific1 X-RAY MAG : 29 : 2009 Wrecks COVER PHOTO BY JOOST-JAN WAANDERS DIRECTORY Join Kurt Amsler’s efforts to save Indonesia’s X-RAY MAG is published by AquaScope Media ApS endangered sea turtles. Sign the petition and Frederiksberg, Denmark donate to the cause at: www.sos-seaturtles.ch www.xray-mag.com PUBLISHER SENIOR EDITOR Team divers share a deco stop above the Saratoga, Bikini Atoll - Photo by Joost-Jan Waanders & EDITOR-IN-CHIEF Michael Symes Peter Symes [email protected] [email protected] SECTION EDITORS contents PUBLISHER / EDITOR Andrey Bizyukin, PhD - Features & CREATIVE DIRECTOR Arnold Weisz - News, Features Gunild Symes Catherine Lim - News, Books [email protected] Simon Kong - News, Books Mathias Carvalho - Wrecks ASSOCIATE EDITORS Cindy Ross - GirlDiver & REPRESENTATIVES: Cedric Verdier - Tech Talk Americas: Scott Bennett - Photography Arnold Weisz Scott Bennett - Travel [email protected] Fiona Ayerst - Sharks Michael Arvedlund, PhD Russia Editors & Reps: - Ecology Andrey Bizyukin PhD, Moscow [email protected] CORRESPONDENTS Robert Aston - CA, USA Svetlana Murashkina PhD, Moscow Enrico Cappeletti - Italy [email protected] John Collins - Ireland Marcelo Mammana - Argentina South East Asia Editor & Rep: Nonoy Tan - The Philippines Catherine GS Lim, Singapore [email protected]
[Show full text]
Surface-Supplied Diving Contents
Surface-supplied diving Contents Market 3 Surface-supplied diving IHC Hytech - Surface-supplied diving 4 Reliable partner for efficient surface-supplied diving solutions Products 4 6 Decompression chambers 10 Containerised systems 13 Handling systems 14 Heaters and scrubbers 15 Control panels 16 Communication and lighting 17 Analysers 18 High-quality components 20 Personal gear 26 IHC Life-cycle support 13 14 21 2 IHC Hytech Market Surface-supplied diving Wet bell handling system Safety and regulations The commercial diving discipline is subject to huge IHC Hytech understands that its customers don’t want to constraints and risks, caused by many different factors, spend too much time on paperwork. Its equipment and such as poor visibility and illumination, confined spaces, systemse ar provided with the right certificates ex works. This sea states, temperature differences, currents, underwater means that a faster deployment of diving systems is possible, noise, decompression sickness and marine life, for example. which therefore reduces costs for customers. Therefore it is governed by an abundance of safety rules and regulations from governmental institutions, business Internationalisation associations and classification societies. Technical and Development in deep and ultra-deep water is booming, operational guidelines are founded on the basis of the most notably in Brazil, West Africa and South East Asia. The approved code of practices as developed for work in the UK decommissioning market is also developing in the north west and Norwegian sector of the North Sea and Atlantic. They give of Europe and the Gulf of Mexico, requiring new solutions. Next strict directions on the design and usage of diving equipment door, the North Sea has among the worst encountered diving for offshore.
[Show full text]
Superlite® 17A/B Helmet Operations and Maintenance Manual
SuperLite® 17A/B Helmet Operations and Maintenance Manual KMDSI Part # 100-001 BY MORGA IR N K D . c IV n E , I SYSTEMS ™ Kirby Morgan Dive Systems, Inc. 1430 Jason Way Santa Maria, CA 93455, USA Telephone (805) 928-7772, FAX (805) 928-0342 E-Mail: [email protected], Web Site:www.KirbyMorgan.com DANGER: Diving with compressed breathing gas is a hazardous activ- ity. Even if you do everything right there is always the danger that you may be killed or injured. No piece of diving equipment can prevent the possibility that you may be killed or injured any time you enter the water. Manual prepared by SaltShaker Marine Industries, Inc., Dive Lab, Inc., and KMDSI. 08/ 04. NOTE: This manual is the most current for the SuperLite 17A/B Helmet.It is page dated August 2004. Future changes will be shown on page III and the changed pages will carry the date of change. Previous manuals may not reflect these updates. The SuperLite-17A/B helmet is CE Approved #16309-01HH and meets or exceeds all performance and testing requirements of all government and non-government testing agencies throughout the world. It is approved for use on all commercial and military work underwater. Only Kirby Morgan masks and helmets have achieved the CR (Commerial Rated) mark, the highest United States of America rating. SuperLite, Band Mask, KMB, KMB Band Mask, Kirby Morgan, DSI, Diving Systems International, EXO, SuperFlow and DECA are all registered trademarks of Kirby Morgan Dive Systems, Inc. Use of these terms to describe products that are not manufactured by KMDSI is not permitted.
[Show full text]
An Updated Short History of the British Diving Apparatus Manufacturers
18 The International Journal of Diving History The International Journal of Diving History 19 Fig. 1. Some key persons from the firm of Siebe Gorman. 1a. (Christian) Augustus Siebe An Updated Short History of the British Diving Apparatus (1788-1872). Company founder. Manufacturers, Siebe Gorman and Heinke 1b. William Augustus Gorman (formerly O’Gorman; 1834-1904). by Michael Burchett, HDS, and Robert Burchett, HDS. Joint partner with Henry H. Siebe (1830-1885) at Siebe & Gorman (later Siebe Gorman & Co.). PART 1. THE SIEBE GORMAN COMPANY 1c. Sir Robert Henry Davis Introduction 1a. 1b. 1c. (1870-1965). Managing Director This account endeavours to produce a short, updated history of the Siebe Gorman and Heinke of Siebe Gorman & Co. manufacturing companies using past and present sources of literature. It does not attempt to include every aspect of the two company histories, but concentrates on key events with an emphasis on 1d. Henry Albert Fleuss the manufacture of diving apparatus. However, an understanding of their histories is not complete (1851-1933). Designer of the first without some knowledge of the social history and values of the period. Victorian and Edwardian practical ‘self-contained breathing society engendered moral values such as hard work, thrift, obedience and loyalty within a class-ridden apparatus’. system, in which poverty, harsh working conditions and basic education were normal for the working 1e. Professor John Scott Haldane classes. With intelligence and application, people could ‘better themselves’ and gain respect in an age of (1860-1936). Diving physiologist innovation, when Britain led the industrial world. who produced the first naval The businesses of Augustus Siebe and ‘Siebe, Gorman’ (in one form or another) survived for over 170 ‘Decompression Dive Tables’.
[Show full text]
Kirby Morgan 57 Helmet
World leaders in diving equipment technology Kirby Morgan 57 Helmet DEFENCE COMMERCIAL Kirby Morgan/SuperLite/Heliox diving masks & helmets are made by Kirby Morgan Dive Systems Inc. © Kirby Morgan Dive Systems Inc. The Kirby Morgan 57 features our b Fiberglass and Carbon Fibre revolutionary new SuperFlow ® 450™ Reinforced Shell Kirby Morgan ® has Stainless Balanced Regulator... over 50 years experience in composite HEAD OFFICE laminations. The helmet shell is hand laid Enterprise Drive The Kirby Morgan 57 Diving Helmet Westhill up glass fibre reinforced thermal setting Aberdeen continues the tradition of innovation, polyester (fiberglass) with carbon fibre AB32 6TQ providing the highest quality and superior reinforcement at key points for added T: +44 (0)1224 740145 performance that divers have come to F: +44 (0)1224 740172 durability. It is light and highly impact expect in a Kirby Morgan product. This resistant, and provides a heat/cold helmet features our revolutionary new barrier as well as being an excellent ® SuperFlow 450™ Stainless Balanced electrical non-conductor. Regulator. It's machined from a stainless steel casting for the ultimate in performance c Defogging Steady Flow Valve provides and reliability. This commercially rated an additional flow of gas into the helmet regulator delivers all the breathing gas you for ventilation and defogging. need for the most demanding work GLOBAL underwater. LOCATIONS d Emergency (EGS) Valve supplies Aberdeen backup breathing gas to the diver. Chertsey The Kirby Morgan 57 also includes our Portsmouth Quad-Valve™ Exhaust System. It's Bremen e Gas Supply Non-Return Valve is recommended for diving in biologically Dubai Commercial Rated™.
[Show full text]
US Environmental Protection Agency Dive Safety Manual
U.S. ENVIRONMENTAL PROTECTION AGENCY DIVING SAFETY MANUAL (Revision 1.3) Office of Administration and Resources Management Safety and Sustainability Division Washington, D.C. April 15, 2016 Acknowledgments The Safety and Sustainability Division (S&S) acknowledges the cooperative participation of members of EPA’s Diving Safety Board over the years, including those members listed below. Jed Campbell Gary Collins Brandi Todd Tara Houda TChris MochonCollura Steven J. Donohue Eric P. Nelson Eric Newman Mel Parsons Dave Gibson Rob Pedersen Alan Humphrey Kennard Potts William Luthans Sean Sheldrake Disclaimer This document is disseminated under the sponsorship of the U.S. Environmental Protection Agency (EPA) in the interest of information exchange. The U.S. government assumes no liability for its contents or use thereof. The U.S. government does not endorse products or manufacturers. Trade or manufacturers’ names appear herein solely because they are considered essential to the object of this document. The contents of this manual reflect the views of EPA’s Diving Safety Board in presenting the standards of their operations. U.S. Environmental Protection Agency DIVING SAFETY MANUAL (Revision 1.3, April 15, 2016) TABLE OF CONTENTS 1.0 DIVE PROGRAM POLICY .............................................................................. 1-1 1.1 Purpose .............................................................................................................. 1-1 1.2 Background ......................................................................................................
[Show full text]