Kirby Morgan 57 Helmet

World leaders in diving equipment technology

DEFENCE COMMERCIAL Kirby Morgan/SuperLite/Heliox diving masks & helmets are made by Kirby Morgan Dive Systems Inc.

The Kirby Morgan 57 features our b Fiberglass and Carbon Fibre revolutionary new SuperFlow ® 450™ Reinforced Shell Kirby Morgan ® has Stainless Balanced Regulator... over 50 years experience in composite HEAD OFFICE laminations. The helmet shell is hand laid Enterprise Drive The Kirby Morgan 57 Diving Helmet Westhill up glass fibre reinforced thermal setting Aberdeen continues the tradition of innovation, polyester (fiberglass) with carbon fibre AB32 6TQ providing the highest quality and superior reinforcement at key points for added T: +44 (0)1224 740145 performance that divers have come to F: +44 (0)1224 740172 durability. It is light and highly impact expect in a Kirby Morgan product. This resistant, and provides a heat/cold helmet features our revolutionary new barrier as well as being an excellent ® SuperFlow 450™ Stainless Balanced electrical non-conductor. Regulator. It's machined from a stainless steel casting for the ultimate in performance c Defogging Steady Flow Valve provides and reliability. This commercially rated an additional flow of gas into the helmet regulator delivers all the breathing gas you for ventilation and defogging. need for the most demanding work GLOBAL underwater. LOCATIONS d Emergency (EGS) Valve supplies Aberdeen backup breathing gas to the diver. Chertsey The Kirby Morgan 57 also includes our Portsmouth Quad-Valve™ Exhaust System. It's Bremen e Gas Supply Non-Return Valve is recommended for diving in biologically Dubai Commercial Rated™. It prevents loss of Cape Town contaminated water, when you're properly gas pressure in the event of umbilical Perth trained and equipped, using recommended Sydney damage. procedures. This new exhaust has exceptionally low exhalation resistance that f Side Block the multi use side block has you must experience to appreciate. Don't confuse the SuperFlow ® 450 with a sport additional ports built in to provide diving regulator - it's designed from the controlled air flow, if needed. ground up strictly for commercial diving. With a rugged extra long adjustment knob g Rapid Change Modular and shaft, the SuperFlow ® 450 meets the Communications System because the wide range of breathing gas pressures module is easily removed from the helmet, provided by typical low pressure surface- repair or replacement of communications discover more supplied diving compressors. Dive the Kirby parts is quick and trouble free. It is www.divexglobal.com Morgan 57 helmet once and you won't want available with either a male waterproof to dive with anything else. connector or a bare wire post connec tion.

Features h Whisker Wings the bubble deflecting a Side & Top Weights bring unsurpassed Whisker Wings keep bubbles further from balance to the helmet while providing for face port and ears, improving visibility accessory mounting areas. and decreasing internal noise. DE-MDS-606 R0 World leaders in diving equipment technology

i Pull Strap the strap has n Quad-Valve™ Exhaust been improved with the System makes the helmet addition of a stainless very dry with no loss of DEFENCE steel “D” ring. This makes breathing performance. COMMERCIAL for easier removal. It also allows the assembly to o SuperFlow ® 450 Stainless easily be hung for drying. Balanced Regulator this balanced, stainless j Positive-Lock™ Latch steel, Commercial System this latching Rated™ demand regulator system, developed by provides easy breathing Kirby Morgan ® in 1992, and excellent performance consists of two sealed with low-pressure Positive-Lock™ pull pins compressors. which are pulled forward HEAD OFFICE to release the neck collar p Nose Block Device Enterprise Drive allows the diver to block and neck dam locking Westhill the nose to equalize ears. Aberdeen system. Even when the AB32 6TQ latches are released, the T: +44 (0)1224 740145 q Silicone Oral Nasal Mask O-ring sealed neck dam F: +44 (0)1224 740172 is made of a superior maintains a positive seal silicone material which is and will not allow the seal hypo-allergenic and has a to be broken until the longer work life than latex. collar actually clears the It also provides an diver's shoulders, thus attachment area for the helping to prevent any prescription lens frame, kit flooding of the helmet. part number 525-775 with oral nasal and 525-776 GLOBAL k Head Cushion gives the LOCATIONS without oral nasal. Aberdeen helmet a secure, well Chertsey balanced feel as well as r Air Train diffuses the Portsmouth excellent thermal protection incoming breathing air/gas Bremen during long work periods. Dubai onto the face plate to Cape Town defog the lens. Perth l Internal Adjustable Chin Sydney Strap the adjustable chin support, along with the adjustable neck pad on the locking collar gives the diver a comfortable, secure fit. m Adjustable Neck Pad the helmet attached yoke

system has an adjustable discover more neck pad which is made www.divexglobal.com from a scuff resistant Kirby Morgan 57 Helmet c/w Posts elastomer. In conjunction Order Code 500-080 with the spring activated front neck dam ring lock, it Kirby Morgan 57 Helmet c/w MWP provides protection for the bottom of the Helmet. Order Code 500-081

DE-MDS-606 R0