DOCSLIB.ORG

[email protected] 2300 Fairway Park Dr. Houston, TX 77092 713-682-1889 800-442-0042

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Sales@Basstool.Com 2300 Fairway Park Dr. Houston, TX 77092 713-682-1889 800-442-0042 2300 Fairway Park Dr. 713-682-1889 www.basstool.com Houston, TX 77092 800-442-0042 [email protected] - 1 - - 2 - CUTTING TOOLS Advent Thread Mills Drills & Taps Spade Drills, Solid Carbide Drills, Thread Mills Gun Drills Bandsaw Blades HS Broaches See KEO, Ultra-Dex & Patriot Carbide Hogging Mills, High Performance Drills Carbide Burs Burnishing Tools HSS & Carbide Taper End Mills High Performance Taps & Thread Mills Bandsaw Blades Small Boring Bars & Indexable Tools Balax Roll Form & Cut Thread Taps Knurls & Knurling Tools Precision Boring System Solid Carbide Saws Deep Hole Drilling Solid Carbide End Mills, Reamers & Drills Turning, Milling, Drilling Inserts & Tooling Gorilla Mill High Performance Carbide End Mills & Drills Chadwick & Trefethen Adjustable Hand Reamers High Performance Drills, Taps & End Mills Drills Back Spot Facers, C'Bore Clapp & Haney Carbide Tipped Tool Bits Miniature, Specialty Drills & End Mills High Speed & Cobalt Drills Rotary / Punch Broaches Drills, Reamers, Taps & End Mills High Performance End Mills Controx End Mills & Milling Cutters Portable Magnetic Drills & Cutters Back Spot Facers & Aircraft C'Bores Deburring & Chamfering Tools Turning, Milling, Grooving, Drilling, Threading, & Boring Heads, Bars, Threading, Grooving Tools Part-Off Inserts and Tooling - 3 - CUTTING TOOLS - cont’d Carbide End Mills Port Contour Cutters, Thread Mills Specialized Carbide Tooling Countersinks, HS Burrs Gun Drill - Deep Hole High Performance Carbide End-Mills & Drills Center Drills, Countersinks, Milling Cutters Deburring Tools Indexable Drills, Reamers, Indexable Milling Rotary Broaches Indexable Tooling Taps Indexable Carbide - Inserts & Holders, Drills Bandsaw Blades & Hole Saws Reamers Autoface, Automatic Back Spotfacers, & Countersinks Modular Center Drills Ceramic, Sini, CBN & PCD Inserts Gear Cutting & Thread Rolling Carbide Drills, Inserts & Indexable Tools High Performance Carbide End Mills & Drills Indexable Carbide Form Cutters Solid Carbide End Mills, Drills, Reamers Grooving, Threading, Part-Off End Mills & Countersinks Solid Carbide Thread Mills Brazed Tools, Solid Carbide Boring Bars & Grooving Tools Grooving & Threading Inserts CRAZY DRILL - Miniature & Long Carbide Drills End Mills, Drills, Taps, Circular Saws & Boring Tools Drills, End Mills & Taps Turning, Milling, Grooving, Threading & Part-Off Inserts & Tooling End Mills Carbide Boring Bars, Indexable Drills & Devib Bars Hole Saws & Files Annular Cutters Deburring Tools USA Made Carbide, Cobalt & HSS Cutting Tools Cutting Tools & Ceramic Inserts Laydown Threading Inserts, Threading Milling Tools Taps & End Mills, Drills High Performance Taps, Hand Taps Oil Hole Drills & Taps Indexable Drills, Milling Cutters & Solid Carbide Tools Deburring Attachments High Performance End-Mills & Drills Taps & Dies Mini Grooving & Boring Tools & Threading Keyseat Cutters & Counter Bores Drills Turning, Milling & Drilling Tools Inserted Corner Radius Tools Taps, Dies Special & Standard Taps High Performance Carbide End Mills Taps Special Taps & Dies Countersinks Solid Carbide & Indexable Thread Mills Boring Tools, Index Drills Solid Carbide End Mills, Drills & Reamers Carbide Slitting Saws Reamers Carbide Tipped Tools YMW Taps Rontgen Bandsaw Blades Deburring Deburring Tools Indexable Carbide Turning & Milling Inserts - 4 - MACHINE TOOL ACCESSORIES Machine Tool Vises and Chucks Lathe Chucks Keyless Drill Chucks Boring Bar & Toolholder Bushings, VDI Tooling Quick Change Lathe Tooling Chuck Jaws & Workholding Phase Convertors Toolholders (CAT, BT, HSK, SK) Precision Boring & Toolholder Systems, Right Angle Heads Vises Toolholder & Collet Systems Retention Knobs Bison Lathe chuck & Chuck Jaws Drill Chucks & Arbors Kalamazoo Toolholders & Tap Holders Chuck Manual Lathe Chucks Lathe Chucks & Workholding 5C Holding Fixtures Phase Convertors Power Chucks Vises & Workholding Toolholding Systems, Live Tooling & Right Angle Heads Tap & Drill Drivers, CAT, BT, & NMTB Toolholders, Automotive Tooling Vises & Workholding BT, CAT, & HSK Tooling, URMA Boring, EWS Live Tooling Drill Chucks Boring Heads & Bars Toolholding Systems, Live Tooling, Right Angle Heads Quick Change Tool Post, Holders, Indexable Tooling DRO Readouts & Scales Live Tooling Magnetic Chucks BT, CAT, HSK Toolholders, Collet Systems, ITS Boring Systems Clamping System Lathe & Milling Machine Guards Vises, Milling Tables & Rotary Tables V-Flange Tooling (CAT, BT) & Vises Modular Boring Bars - 5 - MACHINE TOOL ACCESSORIES- cont’d V-Flange Holders Live Centers, Boring Heads, V-Flange Tooling, Vises Sturdy Phase Convertors Broaching Square Hole Bushings Machine Tool Accessories Power Chucks V-Flange Holders Magnetic Chucks, Sine Plates & Accessories Vises for 5-Axis Machines Workholding Vises Lathe Chucks Tapping Attachments Machine Tool Vises CNC Machine Tooling, V-Flange Holders, Capto Holders Holders, Arbors, Vises, Chucks, Rotary Tables, Screw Thread Inserts Super-Spacers, V-Flange Tooling Toolholding Systems Manual & Power Rotary Tables Live Centers Automatic Boring Heads Live Centers, Vises, Drill Chucks, Lathe Chucks & Boring System Expanding Mandrels Live Centers, Collet Closures, Deburring Tools & Vises, Clamps & Striking Tools Shop Accessories Rubometric Geometric Style Die Heads KM Quick Change, Toolholders, V-flange Tooling Chucks, Toolholders & Accessories Driven Tool Holder Systems Power Feed Units Lathe Chucks, Super-Spacer, Rotary Tables Live Center, & 5C Holding Fixtures Power Chucks Toolholders MRO & SAFETY Safety & Tapes - PPE Paints, Lubricants Air Hose, Fittings, Dryers, Lubricators & Regulators Adhesives, Sealants, Anti-Seize Lubricants, Cleaners Safety Gloves, Glasses & Apparel Layout Fluids Modular Coolant Delivery System Safety - PPE Nozzles for CNC Machines Safetyguard Systems Sprayers Cleaners & Solvents Wipers Slings & Lifting Mist Lubricant System Lubricants Lubricants Adjustable Coolant Hose Floor Mats Thread Lockers & Lubricants Material Handling Lubricants & Cleaners Multipurpose cleaning towels - 6 - PRECISION INSTRUMENTS & GAGING Measuring Instruments Measuring Instruments Allen Gauges Gages for Threaded Tubular Products Dimensional Inspection Gages BARCOR INC. Chamfer Gages Magnetic Indicator Bases Measuring Instruments 3D Non-Contact Metrology Hardness Testers Precision Instruments & Testing Gages Marking Systems Granite Surface Plates Bore, Groove, & Min-wall Gages Fixturing for CMM Machines Plug & Ring Thread Gages Precision Instruments & Gages Measuring Instruments Precision Instruments & Vision Systems Precision Inspection Equipment & Measuring Devices TSK Surface, Form, & Measurements Ring, Plug & API Thread Gages Ring & Plug Thread Gages Measuring Instruments CMM & Vision Systems Measuring Instruments TOOLBOXES & CABINETS Storage Products Storage Products Storage Products Storage Products Pedestal Rollers & Machinery Moving Devices Drill, Reamer & Tap Cabinets Toolboxes & Storage System Storage Products - 7 - ABRASIVES Coated & Non-Woven Abrasives Coated & Non-Woven Abrasives Diamond & CBN Wheels Cut-Off and Grinding Wheels Brush Research Wire Wheels, Nylon Impregnated Brushes & Flex Hones Abrasive Cords & Tapes Grinding Wheels Measuring Instruments Measuring Instruments Coated & Bonded Abrasives Grinding Wheels & Coated Abrasives Allen Gauges Gages for Threaded Tubular Products Dimensional Inspection Gages Wire Wheel Brushes Diamond & CBN Wheels BARCOR INC. Chamfer Gages Magnetic Indicator Bases Bonded & Super Abrasive Grinding Wheels Rubberized Abrasives Measuring Instruments 3D Non-Contact Metrology Non-Woven Cotton Fiber Abrasives Hardness Testers Precision Instruments & Testing Gages Lapping Compound Coated and Non-Woven Abrasives Marking Systems Granite Surface Plates Super Abrasives, Lapping & Polishing Compounds Grinding Wheels & Metal Brushes Bore, Groove, & Min-wall Gages Fixturing for CMM Machines Diamond Hones Plug & Ring Thread Gages Precision Instruments & Gages Flexible Hones Non-Woven & Woven Abrasives Measuring Instruments Precision Instruments & Vision Systems Cylinder Hones Deburring Ceramics Precision Inspection Equipment & Measuring Devices TSK Surface, Form, & Measurements AUTOMATED INVENTORY CONTROL DISPENSING MACHINES Ring, Plug & API Thread Gages Ring & Plug Thread Gages Measuring Instruments CMM & Vision Systems Measuring Instruments - 8 - COOLANTS, LUBRICANTS & COOLING SYSTEMS Oil Skimmers Flood Cooling Systems Tapping & Threading Fluids Adjustable Coolant Hose Way Lube, Hydraulic Oil, Soluble Oil Coolant Systems Chemicals & Lubricants Metalworking Fluids Cool Tool Cutting & Tapping Fluid Nozzles for CNC Machines Cool Blue Synthetic Coolant Fluid Maintenance Mixer Tapping Fluid Tapping Fluids Cutting Fluid EEZ Foamy Cutting Compound Mist Cooling System & Machine Oilers Hand Cleaners Way Oil, Hydraulic Oil, EDM Cutting Oils Metalworking Fluids Hydraulic, Way & Soluble Oils Mist Cooling Systems TOOLING COMPONENTS & Hoist Rings MARKING Drill Bushings & Hoist Rings Tooling Components Stamps Fasteners Thread Repair Inserts Screw Thread Inserts & Tools Workholding Shim Stock, Punch & Die Sets Precision Kidd Drill Rod & Flat Stock Workholding Tap Extractors Metal Stamps - 9 - HAND & ELECTRIC TOOLS HP Power Tools Hand Tools Air Tools, HS Spindles Air Tools, Hoist Compressors Hand Tools Bench Grinders Power Tools Michigan Hand Tools Pneumatic Air Tools Power Tools Electric Power Tools Hand Tools High Speed Grinders Electric Hand Tools Air Tools Air Tools Air Tools Air Tools Torx & Hex Wrenches Wrenches, Ratchets & Sockets Hand Tools Torque Wrenches
Load more

Recommended publications
  • 2018 Line Card
    H.D. Chasen Company Inc. H. D. CHASEN TOOL GROUP INVENTORY SOLUTIONS LOGISTICS www.steelerectortools.com “OTHERS TALK... WE STOCK.” 2018 LINE CARD 40 Lake Street|Somerville, MA|02143 P|617.666.9090 www.hdchasen.com INDEX OF PRODUCTS INDEX OF PRODUCTS A B Abrasive Back Stand Idler Units Abrasives - Abrasive Mounted Points Back Support Systems Abrasives - Bristle Discs - Roloc / Cup Wheel Bags - Tool Bags Abrasives - Cartridge Rolls Balldriver Hex Screwdrivers Abrasives - Cloth Sanding Rolls Balldriver Insert Bits Abrasives - Coated Abrasives Balldriver L-Wrench / Sets Abrasives - Combiwheels Abrasive / Scotchbrite Balldriver Power Bits Abrasives - Diamond Lapping Film Discs Balldriver T-Handle - Sets & Singles Abrasives - Diamond Lapping Film Sheets Bandsaws - Electric Abrasives - Diamond Products Bars - Boring Abrasives - Disc Pad Holder Bars - Breaker 3/8,1/2,3/4 Drive Abrasives - Discs PSA Cloth / Paper, Resin Fibre Bars - Claw Bar 5' Abrasives - Discs Quick Change Bars - Connecting Bars Abrasives - Discs Resin Fibre Bars - Diamond Point 5' Abrasives - Discs Roloc A/O, Regalite Polycut Bars - Grizzly Bar Abrasives - Discs Velcro S/C, Gold Bars - Jimmy Bars Abrasives - Flap Wheels Bars - Offset Pinch Bars - 14" - 48" Abrasives - Lapping Film Discs Bars - Pinch Bars 13-1/2" - 48" Abrasives - Lapping Film Sheets Bars - Pinch Point Crow Bar / 3' - 5-1/2' Abrasives - Microfinishing Film Discs Bars - Pry Abrasives - Microfinishing Film Sheets Bars - San Angelo Digging 5' - 7' Abrasives - Mounted Points / Cotton Abrasive Bars - Telegraph Lining
    [Show full text]
  • Atla Fibre Co Article Fabricating Cutting Thermoset
    SpecialFocus Fabricating and Cutting Thermoset Materials Plastics Fabrication by Mark Mush s the machining of plastic materials cannot be mastered in one diameter run at 3,000-3,600 rpm will give good results cutting dry with a setting, the same can be said, probably more so, of thermosets good exhaust system. Material feed should be as fast possible without forcing A(FR4/G-10, G-11, phenolics). Glass epoxies and phenolics have the saw. Idling creates friction and heat, which cause excessive dulling and traditionally been unfairly characterized as materials that many machine burning. A flood of water or water-soluble coolants on the work and wheel shops or fabricators avoid due to their dust, wear and tear on equipment can be used when necessary to prevent overheating. Abrasive wheel cutting and tools and the overall toughness of the material. To the contrary, with under water is also recommended. a little bit of practice and patience, most fabricators can master the art of thermosets. What follows is a guide to get you started in that process. Turning Mastering these suggestions will not immediately make you an expert Paper and fabric grades machinist of these materials but should significantly improve your skills. Ordinary high-speed tool steel can be used in finishing operations for all Paper and fabric grades thermoset grades. However, carbide-tipped tools may prove more economi- cal and will hold sizes more accurately from piece to piece. About .010" stock Thermoset materials machine well with proper techniques. As a rule, they should be left for finishing. Thermosets can be turned at 400 surface feet per machine more readily than metals with standard machine tools such as minute with high-speed tools and about twice as fast with carbides.
    [Show full text]
  • Carbide Tipped Annular Cutters Are Engineered for Cutting 3” and 4” Thick Steel, Pipe, and Square Channel
    Innovative Cutting Tool Solutions 2011 Product Catalog Your Productivity Partner Professional Grade Products Champion has been dedicated to servicing professionals with industrial grade products and services since 1897. Our product range includes twist drills, end mills, taps, dies, cutters, power tools, and masonry tools that are engineered for peak performance. Our distribution network serves cutting tool users in all fifty U.S. States, and is expanding internationally. Our commitment to same-day shipping and superior technical support give you, our customer, the Champion Edge. Innovative Cutting Tool Solutions Our CT5 Carbide tipped hole cutter has been completely redesigned. The result is faster hole penetration, and longer tool life. The design enhancements include a new carbide tip pocket for faster chip evacuation, improved carbide tips, stepped pilot drill for smoother penetration, and stiffer spring for positive slug ejection. The new CM95X series of SDS-Plus hammer bits features a “solid-tip” which penetrates rebar-imbedded concrete. These state of the art SDS-Plus bits penetrate the toughest aggregates including Vermont granite. Champion’s iPac system provides professional grade cutting tools in individual and combination packs. The iPac range includes twist drills, taps, and screw extractors. DT22HEX combination drill and taps create a hole and thread in one application. Available in NC/NF, and metric sizes, these industrial quality tools are available from 6-32 machine screw size to 1/2-13. Perfect for industrial, MRO and electrical professions. Champion’s CT9 was designed in conjunction with locksmiths whose work requires the installation of locksets in steel doors. CT9 hole cutters enable quick drilling of 1-1/2” and 2-1/8” holes in steel doors.
    [Show full text]
  • Planing and Profiling
    Anpassung der Rückenstärke für Druck noch nicht ausgeführt Planing and profiling Leitz Lexicon Edition 7 Version 2 Explanation of abbreviations A = dimension A LH = left hand rotation ae = cutting thickness (radial) ap = cutting depth (axial) M = metric thread ABM = dimension MBM = minimum order quantity APL = panel raising length MC = multi-purpose steel, coated APT = panel raising depth MD = thickness of knife AL = working length min-1 = revolutions per minute (RPM) AM = number of knives MK = morse taper AS = anti sound (low noise design) m min-1 = metres per minute m s-1 = metres per second b = overhang B = width n = RPM BDD = thickness of shoulder nmax. = maximum permissible RPM BEM = note NAL = position of hub BEZ = description ND = thickness of hub BH = tipping height NH = zero height BO = bore diameter NL = cutting length NLA = pinhole dimensions CNC = Computerized Numerical Control NT = grooving depth d = diameter P = profile D = cutting circle diameter POS = cutter position D0 = zero diameter PT = profile depth DA = outside Diameter PG = profile group DB = diameter of shoulder DFC = Dust Flow Control (optimised chip clearance) QAL = cutting material quality DGL = number of links DIK = thickness R = radius DKN = double keyway RD = right hand twist DP = polycrystalline diamond RH = right hand rotation DRI = rotation RP = radius of cutter FAB = width of rebate S = shank dimension FAT = depth of rebate SB = cutting width FAW = bevel angle SET = set FLD = flange diameter SLB = slotting width fz = tooth feed SLL = slotting length fz eff = effective tooth feed SLT = slotting depth SP = tool steel GEW = thread ST = Cobalt-basis cast alloys, GL = total length e.g.
    [Show full text]
  • Caddo Archeology Journal
    CCaddoaddo AArcheologyrcheology JJournalournal Volume 16 Spring 2007 CADDO ARCHEOLOGY JOURNAL P.O. Box 8419 Austin, TX 78712-8419 EDITORIAL BOARD TIMOTHY K. PERTTULA 10101 Woodhaven Dr. Austin, TX 78753 e-mail: [email protected] CHESTER P. W ALKER 5309 DUVAL STREET AUSTIN, TX 78751 e-mail: [email protected] GREGORY VOGEL Center for American Archeology P.O. Box 366 Kampsville, IL 62053 [email protected] T. CLAY SCHULTZ 507 Franklin San Marcos, TX 78666 [email protected] LIASON WITH THE CADDO NATION OF OKLAHOMA ROBERT CAST Tribal Historic Preservation Offi cer Caddo Nation of Oklahoma P.O. Box 487 Binger, OK 73009 e-mail: [email protected] ISSN 1522-0427 Printed in the United States of America at Morgan Printing in Austin, Texas 2007 2 ◆ Spring 2007 Table of Contents Proposal For A 2007 Caddo Archaeology Summit Meeting . 5 Timothy K. Perttula Byram Ferry (16BO17): A Middle to Late Caddo Period Mound Site in the Red River Floodplain, Northwest Louisiana. 9 Jeffery S. Girard Archaeological Investigations of the Lang Pasture (41AN38) Midden Deposits on private property west of the SH 155 Right-of-Way, Anderson County, Texas . 27 Timothy K. Perttula, Bo Nelson, Mark Walters, and LeeAnna Schniebs Remote Sensing at the Horace Cabe Site (41BW14). 37 Chester P. Walker and Timothy K. Perttula The History of Archaeological Investigations at the Jamestown Mound Site (41SM54), An Archaeological Concervancy Preserve in Smith County, Texas . 45 Timothy K. Perttula Leaning Rock Site (41SM325) Lithics . 57 Harry J. Shafer The Organization of Novaculite Tool Production: Quarry-Workshop Debitage Comparisons . 71 Mary Beth Trubitt CADDO ARCHEOLOGY JOURNAL ◆ 3 PROPOSAL FOR A 2007 CADDO ARCHAEOLOGY SUMMIT MEETING Timothy K.
    [Show full text]
  • Dimar Dado Set Instructions
    Carbide Tipped Dado Sets - General Purpose Carbide Tipped Dado Sets - General Purpose Tool number Description Dia. Teeth Kerf Bore Tool number Description Dia. Teeth Kerf Bore 8-24 DADO Complete Set 8" 24 13/16" 5/8" 6-18 DADO CL Complete Set 6" 18 13/16" 5/8" 8-1/16 Dado Chipper 8" 2 1/16" 5/8" 6-1/16 Dado Chipper 6” 2 1/16" 5/8" 8-1/8 Dado Chipper 8" 2 1/8" 5/8" 6-1/8 Dado Chipper 6" 2 1/8" 5/8" 8-1/4 Dado Chipper 8" 2 1/4" 5/8" 6-1/4 Dado Chipper 6" 2 1/4" 5/8" 8-24R Saw Blade R 8" 24 1/8" 5/8" 6-18R Saw Blade R 6" 18 1/8" 5/8" 8-24L Saw Blade L 8" 24 1/8" 5/8" 6-18L Saw Blade L 6” 18 1/8" 5/8" Negative Hook Tooth Design Suitable for Wood & Melamine Chip Limiter - will prevent kickback Tool number Description Dia. Teeth Kerf Bore Tool number Description Dia.Teeth Kerf Bore www.dimarcanada.com 8-24 DADO-1 Complete Set 8" 24 13/16" 1" 8-24 DADO-CL Complete Set 8" 24 13/16" 5/8" 8-1/16-1 Dado Chipper 8" 2 1/16" 1" 8-1/16 Dado Chipper 8" 2 1/16" 5/8" 8-1/8-1 Dado Chipper 8" 2 1/8" 1" 8-1/8 Dado Chipper 8" 2 1/8" 5/8" 8-1/4-1 Dado Chipper 8" 2 1/4" 1" 8-1/4 Dado Chipper 8" 2 1/4" 5/8" 8-24R-1 Saw Blade R 8" 24 1/8" 1" 8-24RC Saw Blade R 8" 24 1/8" 5/8" 8-24L-1 Saw Blade L 8" 24 1/8" 1” 8-24LC Saw Blade L 8" 24 1/8" 5/8” DADO SET Negative Hook Tooth Design Suitable for Wood & Melamine Chip Limiter - will prevent kickback INSTRUCTIONS Carbide Tipped Dado Sets - For Melamine Tool number Description Dia.
    [Show full text]
  • Antares, Inc. Fact Sheets Surface Engraving © 2011 - Antares, Inc
    Antares, Inc. Fact Sheets Surface Engraving © 2011 - Antares, Inc. Section One - Burnishing Description Burnishing is a surface marking technique intended for coated metals - usually lacquered brass - where the coating is removed to expose the bare metal. It is a method of rotary engraving on metals that tends to bridge the gap between diamond drag (scratch engraving) and routing. The biggest advantage of burnishing is that it enables the engraver to produce wider line widths than are obtainable with a diamond graver with- out having to cut deeply into the metal. Burnishers can be used with single and multiple line fonts, and are excellent for producing detailed line and logo work on metal. Burnishing offers the ability to create enhanced effects on both lettering and graphics and is relatively simple process. Rotating Tools Non-Rotating Point Variable Tip Sizes Tip Only Cutting with Depth Surface Marking Only Application The most common application is on the brass plates on trophies and plaques. This “trophy brass” is a rela- tively hard material that yields excellent burnishing results. It is available in various gold tones with clear or colored lacquer coatings. When burnishing the gold material, the lacquer is removed exposing the bare metal. The burnished areas can then be oxidized or blackened resulting in a gold plate with contrasting black letters. (See “Color Filling Fact Sheet”). When burnishing the colored materials, the result is a colored plate with contrasting gold letters without the need for further treatment. Burnishing can also be done on materials other than brass. However, much of the success or failure de- pends on the hardness of the material.
    [Show full text]
  • User Encyclopedia
    User encyclopedia Leitz Lexicon Edition 7 11. User encyclopedia 11.1 Materials science 11.1.1 Wood as a raw material and basic material 2 11.1.2 Wood materials 6 11.1.3 Plastics 9 11.1.4 Mineral materials 11 11.1.5 Non-ferrous metals 12 11.1.6 Composite materials 13 11.2 Cutting materials 14 11.3 Fundamental cutting principles 11.3.1 Essential geometry elements in a cutting tool 19 11.3.2 Cutting directions and procedures when cutting wood 20 11.3.3 Cutting kinematics 21 11.3.4 Processing quality 22 11.3.5 Tool parameters 25 11.4 Machine tools 11.4.1 Tool types 28 11.4.2 Types of tools 31 11.4.3 Tool clamping systems 40 11.4.4 Tool maintenance 43 11.4.5 Safety 51 11.4.6 Low noise tools 53 11.4.7 Chip and dust extraction 54 11.4.8 Tools as intelligent process components 56 11.5 Wood processing machines 11.5.1 Through feed machines 58 11.5.2 Stand alone machines 59 11.5.3 Machines for manual feed 61 11.5.4 Hand operated electrical tools 62 1 11.1 Materials science 11.1.1 Wood as a raw material and basic material As a renewable material, wood is a raw material which is important because of its strength and low density and because it is found all over the world. As a result, wood is used widely in support structures in timber construction and in non load-bearing areas such as building components, furniture or interior fittings.
    [Show full text]
  • D-Constructed Tool Glossary
    UNIVERSITY OF BRITISH COLUMBIA D-CONSTRUCTED TOOL GLOSSARY MATERIALS • TOOLS • PROCESSES A 21 POLAR 23 ADDITIVE MANUFACT. 66 PROFILE SCANNER C R 18 CARTESIAN 59 ROTOMOLDING 43 CNC LATHE 44 CNC MILL S 53 CNC PRESS BRAKE 20 SCARA 54 CNC PUNCH PRESS 38 STEREOLITHOGRAPHY 55 CNC ROLLER APPARATUS (S.L.A.) 45 CNC ROUTER 25 SUBTRACTIVE MANUFACT. 56 CNC TUBE BENDER 37 SELECTIVE LASER MELTING 09 CONCEPTS (S.L.M.) 16 CUTTING TOOLS 58 SINGLE POINT FORMING (S.P.F.) D 67 STRUCTURED-LIGHT 19 DELTA 12 DEGREES OF FREEDOM T 14 TOOL PATH E 49 EDM V 57 VACUUM FORMING F 07 FOREWORDS W 27 FORMATIVE FABRICATION 48 WATER JET CUTTER 35 FUSED DEPOSITION 49 WIRE EDM MODELING (F.D.M.) 13 WORK ENVELOPE H # 31 HYBRIDS 10 2D 11 3D L 68 3D BODY SCAN 36 LAMINATED OBJECT 39 3D INK JET MANUFACTURING (L.O.M.) 12 6-DEGREES OF FREEDOM 63 LIDAR I 60 INJECTION MOLDER 61 INPUT K 15 KINEMATICS M 64 MOTION CAPTURE P 14 PATH 65 PHOTOGRAMMETRY 47 PLASMA CUTTER 03 GLOSSARY 48 WATER JET CUTTER 49 WIRE EDM 05 TABLE OF CONTENT 51 FORMING 07 FOREWORDS 53 CNC PRESS BRAKE 09 TERMS & CONCEPTS 54 CNC PUNCH PRESS 55 CNC ROLLER 10 2D 56 CNC TUBE BENDER 11 3D 57 VACUUM FORMING 12 6-DEGREES OF FREEDOM 58 SINGLE POINT FORMING 13 TOOLSPACE 59 ROTOMOLDING 14 TOOLPATH 60 INJECTION MOLDING 15 KINEMATICS 16 CARTESIAN 61 INPUT 17 G-CODE | CNC 18 CARTESIAN 63 LIDAR 19 DELTA 64 MOTION CAPTURE 20 SCARA 65 PHOTOGRAMMETRY 21 POLAR 66 PROFILE SCANNER 23 ADDITIVE 67 STRUCTURED-LIGHT 25 SUBTRACTIVE 68 3D BODY SCAN 27 FORMING 29 INPUT 71 ACKNOWLEDGMENTS 31 HYBRIDS 33 ADDITIVE MANUFACT.
    [Show full text]
  • Design & Development of Special Purpose Machine for Its Cycle Time
    Imperial Journal of Interdisciplinary Research (IJIR) Vol-2, Issue-9, 2016 ISSN: 2454-1362, http://www.onlinejournal.in Design & Development of Special Purpose Machine for its Cycle Time Optimization A. H. Rasal1, Prof. (Dr.) V. R. Naik2 & R. A. Mane3 1M.E. (Mech) P.D.D.student, Textile and Engg. Institute, Ichalkaranji, Kolhapur. 2Head of Mechanical Department, Textile and Engg. Institute, Ichalkaranji, Kolhapur. 3Asst. manager, Paranjape Autocast Pvt, Ltd,,Satara. Abstract - The growth of Indian manufacturing the experience of the shop floor machine tool sector depends largely on its productivity & operators for optimal selection of cutting quality. Productivity depends upon many factors, conditions and tools. Considerable efforts are still one of the major factors being manufacturing in progress on the use of hand book-based efficiency with which the operation /activities are conservative cutting conditions and cutting tool carried out in the organization. Productivity can be selection at the process planning level [8]. improved by reducing the total machining time, Sawing is a metal cutting process which combining the operations etc. In case of mass makes use of cutting tools such as band saw, production where variety of jobs is less and circular saw. These tools are used on conventional quantity to be produced is huge, it is very essential sawing machines i.e. a worker holds the job on the to produce the job at a faster rate. This is not machining table and slides it further in the direction possible by using general purpose machines. The of rotating saw and the cutting process takes place. best way to improve the production rate In this paper, the component is a cylinder head (productivity) along wit quality is by use of special made of aluminium alloy (IS designation 4223).
    [Show full text]
  • AIR TOOLS, Continued Sanders ...414-415 Saw, Cut-Off ...413 Scalers
    ABRASIVES ABRASIVES, continued AIR TOOLS, continued Backing Pads ............………330 Grinding Wheels Sanders .........................414-415 Belts Tool & Cutter ..............310-311 Saw, Cut-off ......................... 413 Sanding ............................. 334 Hand Pads ............................ 341 Scalers ................................. 414 Brushes Holder Pads .......................... 341 Signal Bells .......................... 434 Acid ................................... 303 Mounted Points Swivels ................................. 433 BRM, Flex-Hone................. 298 Carbide ......................226-233 Tank Valves .......................... 434 Chip .................................. 303 CBN ................................... 323 Tire Gages .....................431-432 Conflex .............................. 302 Diamond ............................ 323 Tool Oil ................................. 500 High Speed .................226-229 Counter Dusters ................ 303 Tubing, Puvex ....................... 416 Non-Woven ....................... 341 Wrenches ............................. 415 Cup ............................300-301 Vitrified Bond ..............317-318 AIRCRAFT COUNTERBORES ....... 95 End ................................... 302 Non-Woven ....................338-341 AIRCRAFT EXTENSION DRILLS .31-32 Flex-Hone, BRM................. 298 PSA Discs ............................. 331 ALLEGIANCE ® Floor .................................. 303 Quick Change Discs...... 329, 332 Burrs .............................226-233
    [Show full text]
  • TFT Catalog 2009.Pdf
    PRECISION MEASURING MEASURING TOOL SETS 1-2 VERNIER CALIPERS 3 TOOLS DIAL CALIPERS 3-4 ELECTRONIC CALIPERS 5-7 CALIPER ACCESSORIES 7 OUTSIDE MICROMETERS 8-11 INSIDE MICROMETERS 12-13 MICROMETER ACCESSORIES 13 INDICATORS 14-17 HEIGHT GAGES 18 DEPTH GAGES 19 BORE GAGES 19 GAGE BLOCKS 20 THERAD GAGES 21 OTHER GAGES 22-23 SQUARES & PROTRACTORS 24 MAGNETIC TOOLS 25-27 PARALLEL SETS 27-28 1-2-3 & 2-4-6 BLOCKS 29 GRANITE TOOLS 29 ANGLE BLOCKS 30 LEVELS 30 HARDNESS TESTER 31 EDGE FINDERS 31 MICROSCOPES 32-33 MEASURING TOOL SETS MAGNETIC BASE & DIAL INDICATOR SET TEST INDICATOR & UNIVERSAL INDICATOR HOLDER SET PRECISION MEASURING TOOLS Item No. No. of Pieces Set Consists of Item No. No. of Pieces Set Consists of 90075C 2 Standard 132lbs magnetic base 90072C 2 0.03"/0.0005" dial test indicator 1"/0.001" dial indicator Universalindicator holder 90070C 2 Magnetic base with fine adjustment 132lbs 1"/0.001" dial indicator MINI MAGNETIC INDICATOR GRANITE STAND & INDICATOR SET HOLDER & TEST INDICATOR SET • Overall height approximately 10" MACHINE TOOL ACCESSORIES • Fine adjustment knuckle on clamp Base Size: 1-3/16" diameter and 1" high • Extreme stable and durable • Granite stand flatness: 0.00005" Item No. No. of Pieces Set Consists of Item No. No. of Pieces Set Consists of 90071C 2 Universal holder with fine adjustment 90050C 2 6x6x2" granite check 0.06"/0.0005" horizontal test indicator 0-1" dial indicator 90055C 2 6x6x2" granite check 0-1" electronic indicator 90051C 1 6x6x2" granite check only ELECTRONIC CALIPER & MICROMETER SET Features: Both units include Large LCD display; Furnished with plastic case DIAL CALIPER WITH T-BAR DEPTH BASE ATTACHMENT CUTTING TOOLS Item No.
    [Show full text]