PRECISION MEASURING MEASURING TOOL SETS 1-2 VERNIER 3 TOOLS DIAL CALIPERS 3-4 ELECTRONIC CALIPERS 5-7 CALIPER ACCESSORIES 7 OUTSIDE 8-11 INSIDE MICROMETERS 12-13 ACCESSORIES 13 INDICATORS 14-17 HEIGHT GAGES 18 DEPTH GAGES 19 BORE GAGES 19 GAGE BLOCKS 20 THERAD GAGES 21 OTHER GAGES 22-23 SQUARES & PROTRACTORS 24 MAGNETIC TOOLS 25-27 PARALLEL SETS 27-28 1-2-3 & 2-4-6 BLOCKS 29 GRANITE TOOLS 29 ANGLE BLOCKS 30 LEVELS 30 HARDNESS TESTER 31 EDGE FINDERS 31 MICROSCOPES 32-33 PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 

only

check granite

icator Indicator 0-1" dial indicator 6x6x2" granite check 6x6x2" granite check Hard case Set Consists of 0-1" electronic indicator depth base T-Bar 6x6x2" Universalindicator holder

-Bar Depth Base

2 2 1

2 shockproof dial caliper 6"/0.001"

2 dial test indicator 0.03"/0.0005" 90050C icator & Universal Indicator Item No. No. of Pieces Set Consists of 90055C 90051C Item No. 90063C No. of Pieces

Item No. 90072C No. of Pieces Set Consists of

hment ttac et Holder S • Overall height approximately 10" • Fine adjustment knuckle on • Extreme stable and durable • Granite stand flatness: 0.00005" Dial Caliper with T A Test Set d & Indicator Granite Stan MEASURING TOOL SETS TOOL MEASURING

6" digital caliper Set Consists of Set Consists of Set Consists of 6" IP54 digital caliper 1"/0.001" dial indicator 1"/0.001" dial indicator 0- 1" 2-key electronic micrometer Standard 132lbs magnetic base horizontal test indicator 0.06"/0.0005" 0-1" IP54 5-key electronic micrometer

90062C 2

Item No. No. of Pieces 90061C 2

90071C 2 Universal holder with fine adjustment Item No. No. of Pieces

90070C 2 Magnetic base with fine adjustment 132lbs Item No. No. of Pieces 90075C 2 Set Indicator & Dial Base Magnetic eter Set Electronic Caliper & Micrometer Features: Both units include Large LCD Furnished with plastic case display; Base Size: 1-3/16" diameter and 1" high ini Magnetic Indicator mini Magnetic Set Holder & Test Indicator  CUTTING TOOLS ACCESSORIESPRECISION MEASURING TOOLS 3 PieceElectronicInspectionKit Elec. Indicator, Magnetic Base&PointKitSet 3 PieceMachinistSet

o No.ofPieces Item No.

o No.ofPieces ItemNo. 90083C

90060C 90082C ics Set Consistsof No.ofPieces ItemNo.

90064C 3

6"flexruler(4R-8ths,16ths,32nds,64ths) 3 3

3 1"2-keyelectronicmicrometer MEASURING TOOLSETS Magnetic basewithF.A Magnetic basewithF.A 6"/0.001" dialcaliper 22 pcindicatorpointset 22 pcindicatorpointset 0.5" electronicindicator 1" digitalindicator 1" electronicindicator Set Consistsof 6" digitalcaliper 1" micrometer Set Consistsof

132lbs 132lbs

6PC MachinistStarter Kit 4 PieceInspectionCombSet Dial Indicator, Magnetic Base&PointKitSet

o No.ofPieces ItemNo.

o No. ofPieces ItemNo.

ofPieces No. 90074C ItemNo.

90076C 90065C 6 4

3

Dial testindicator0.03"/0.0005" Magnetic basewithF.A 6" dialcaliper;1"indicator Magnetic basewithF.A Magnetic basewithF.A 22 pcindicatorpointset 22 pcindicatorpointset 0.03" dialtestindicator 22 pcindicatorpointset Set Consistsof Set Consistsof 1" dialindicator 1" micrometer Set Consistsof 1" dialIndicator

132lbs 132lbs

132lbs

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS  Red

Black Black Black Black White White White White Green Yellow 0.001"/0.02mm 0.001"/0.02mm 0.001"/0.02mm

0-4" 0-4" 0-6" 0-6" 0-6" 0-6" 0-6" 0-8" 0-8" 0-12" 0-12"

6"/150mm 8"/200mm 12"/300mm

05180L 05025L 05110L 05140L 05175L 05010L 05015L 05043L 05120L 05130L 05155L Black White

Item No. Range Face 05035L 05167L 05210L

Item No. Range Graduation

05001L 05225L 05226L Item No. Item No. Face

Furnished in a fitted plastic case • Features: • .100"/2.0mm per revolution • with satin chrome finish • Separate dial for inch and metric • 4 way measurements" Base For 6" & 8" Calipers For 6" h Base 4" Dept caliper into a depth your dial, vernier and digital • Transforms device measurement dial, vernier or digital caliper • Fits any brand surface hardened • Precision-ground, • Graduation: 0.001" • .100" per revolution chrome finish • Stainless steel with satin • 4 way measurements 6" & 12" Dial Caliper Set Dial Calipers Inch/Metric alipers Precision Dial C

Graduation Graduation Graduation 0.001"/0.02mm 0.001"/0.02mm 0.001"/0.02mm 0.001"/0.02mm VERNIER CALIPERS & DIAL CALIPERS DIAL & CALIPERS VERNIER ing Screw ock 0.001"/0.02mm 0.001"/0.02mm 0.001"/0.02mm 0.001"/0.02mm 0.001"/0.02mm 0.001"/0.02mm 0.001"/0.02mm 0.001"/0.02mm

Range Range Range Range Graduation 12"/300mm 18"/450mm 24"/600mm 0.001"/0.02mm 0.001"/0.02mm 6"/150mm 8"/200mm 40"/1000mm 60"/1500mm 80"/2000mm 6"/150mm 8"/200mm 6"/150mm 8"/200mm 0.001"/0.02mm 12"/300mm 12"/300mm 12"/300mm

Item No. 15010L 15040L 15050L 15020L 15030L 15060L Item No. 10022L 10023L 10024L 10015L Item No. 10025L 10040L 10007L Item No. 10005L 10006L • Longer jaws permit greater accessibility Heavy-Duty Vernier Calipers • Hardened stainless steel throughout • Satin chrome finish • All measuring faces are ground and lapped for extreme accuracy • Hardened stainless steel throughout • Satin chrome finish accuracy • All measuring faces are ground and lapped for extreme ment Vernier Caliper with Fine Adjust • 4-way measurements • 4-way measurements • Hardened stainless steel throughout • Satin chrome finish accuracy • All measuring faces are ground and lapped for extreme k h Thumb loc Vernier Caliper wit • All measuring faces are ground and lapped for extreme accuracy faces are ground and lapped • All measuring Upper L h Upper wit Caliper Vernier • 4-way measurements steel throughout • Hardened stainless finish • Satin chrome  CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Tough,shockproofdesign • .100"perrevolution • .001"graduations • Stainlesssteelconstruction Shockproof DialCaliper • .100"perrevolution • .001"graduation 6" Dial • 4waymeasurementss stainlesssteelwithsatinchromefinish • Dualreadingdial:Outsidedial:0.1"range;Insidefullrange • Features: Easy-Reading DialCaliper • Tincoatedforlongerwearlife • .100"perrevolution • .001"graduation 6" TinCoated DialCaliper

05086L 05084L 05082L 05080L No. Item C aliper w/ Graduation Range ItemNo. 05315L 05310L 05305L

DIAL CALIPERS ItemNo. ItemNo. C 0-12" Face Range 0-8" 0-6" 05090L White 0-12" 06070L ar White Black White 0-8" 0-6" 0-6" b i

d e T 0.001" 0.001" 0.001" ip ty DialCaliper Duty Precision Heavy • Coveredrackpreventsdustanddirtdamage • Includesthumbroller • 4-waymeasurementsforoutside,inside,depthandstep • Stainlesssteelconstructionwithsatinfinish2.0mmperrevolution Metric DialCalipers • Fractionalanddecimalreadingsonthedialface • Range:0-6" • Graduation:0.01"/1/64" 6"/64ths FractionalDialCaliper • .001"graduation.100"perrevolution • Stainlesssteelconstructionwithsatinfinish Dial Caliper w/Upperuty Heavy-D Jaw • Stainlesssteelwithsatinchromefinish • 0.100"perrevolution 05214L 05169L 05093L No. Item 05250L 05240L 05230L 05229L Item No.

05228L 05227L Item No.

05135L ItemNo. 0.02mm 0.02mm 0.02mm 0-300mm 0-200mm 0-150mm Resolution Range Range 0.001" 0.001" 0.001" 0.001" 0-40" 0-24" 0-18" 0-12" Range 0-12" 0-8"

Graduation

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS  "TOL" "ABS" "HOLD" "MODE"

Range

Hold "peak" max or min measurements and recall from memory After setting high/low linits, arrow sign will flash when measuring data out of limits. Absolute button allows to the absolute return Hold result at any positon

Range Description 0-6"/0-150mm 0-6"/0-150mm Common display Colorful display

Item No. 06043L 06050L 06060L 06065L 0-12"/0-300mm 06066L 0-20"/0-450mm 06067L 0-24"/0-600mm 0-40"/0-1000mm 0-60"/0-1500mm 0-80"/0-2000mm

Item No. 06080L 06081L

06132L 0-12"/0-300mm No. Item 06100L Range 0-6"/0-150mm Function key type 06101L 06102L 0-8"/0-200mm 06110L 0-12"/0-300mm 06111L 06112L 0-6"/0-150mm 0-8"/0-200mm 06120L 0-12"/0-300mm 06121L 06122L 0-6"/0-150mm 0-8"/0-200mm 06130L 0-12"/0-300mm 06131L 0-6"/0-150mm 0-8"/0-200mm Function: On/Off, in/mm, zero setting in/mm, Function: On/Off, 4-Key Digital Calipers 4-Key Digital • Four key type: Function key, On/Off key, In/mm key, Zero setting key. • Same features as basic type. Calipers Heavy-Duty Digital ABS/Inc measurement • Functions: On/Off, (0.0005"/ 0.01mm) • Inch/mm reading • Data hold, Tolerance • Zero setting Calipers Full Screen Digital • Full screen display for easy reading • Resolution: 0.0005"/0.01mm • Colorful display type features colored digit ELECTRONIC CALIPERS ELECTRONIC

Resolution D MODEL I arge LC ODEL II D M arge LC Range Range Range

D LC arge No. Item 06007L 06030L 06044L 0-6"/0-150mm 0-8"/0-200mm 0-12"/0-300mm No. Item 06025L 06026L 06026L 0-6"/0-150mm 0-8"/0-200mm 0-12"/0-300mm Item No. 06004L 06006L 06032L 06042L 0-4"/0-100mm 0-6"/0-150mm 0-8"/0-200mm 0-12"/0-300mm

No. Item 06015L 06016L Range 0-6"/0-150mm 06017L 0-8"/0-200mm 0-12"/0-300mm 0.0001"/0.001mm 0.0001"/0.001mm 0.0001"/0.001mm

• Zero setting at any position 3-Key Digital Caliper Extra L 3-Key Digital • Funciton: On/Off • Inch/mm reading (0.0005"/ 0.01mm) 3-Key Digital Caliper Extra L 3-Key Digital • Zero setting at any position • Funciton: On/Off • Inch/mm reading (0.0005"/ 0.01mm) ance Digital Caliper mance Digital 3-Key high perfor • Zero setting at any position • Zero setting aliper L Caliper Digital 3-Key • Funciton: On/Off (0.0005"/ 0.01mm) • Inch/mm reading  CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Keys:On/Off,inch/mmconversion(0.0005"/0.01mm),zerosetting • Canmeasurethediameterofoutsidegrooveworkpiece 6" OutsideGrooveDigital Caliper • On/Off,inch/mmconversion,zerosetting • Coolant,water&oilresistanttoIP54 IP54 Digital Calipers • Withfittedcase. • StandardSR44,1.55Vbatteryincluded. • 4-waymeasurements:Outside,InsideDepth&Step. • Resolution:mm.1/128"/0.0005"/0.01mm • Pressbuttontochangemodemm/inch/fractional • Zerosetting • SwitchOn/OffandAutooff. 6" FRACTIONALELECTRONICCALIPERS • Withfittedcase. • StandardSR44,1.55Vbatteryincluded. • 4-waymeasurements:Outside,InsideDepth&Step. • Bodyishardenedstainlesssteel. • Resolution:.0005"/.01mm. • Three-keyModel:Inch/MM,On/Off&Zero. • DigitsDisplayHeight:0.4". • ExtralargeLCDDimension:1.5"Lx0.55"W. • Specialmademodelforleft-handedpeople. LEFT HANDELECTRONICCALIPERS 06212L 06211L 06210L Item No. 06230L Item No. 06231L 06092L No. Item 0~12"/0~300mm ~"010m ±0.001"/0.02mm 0~6"/0~150mm 0.0005"/0.01mm 0-12"/0-300mm 0.0005"/0.01mm 0.0005"/0.01mm 0-8"/0-200mm 0-6"/0-150mm

Range Resolution Range ELECTRONIC CALIPERS Item No. 06170L

Range 0-6" ±0.001"/0.02mm Accuracy

• Resolution:0.0005"/0.01mm • Inch/Metricconversion • ON/OFF,Zerosettingatanyposition 6" TinCoated Digital Caliper • On/Off,inch/mmconversion(0.0005"/0.01mm),zerosetting • Coolant,water&oilresistanttoIP65 IP 65Digital Caliper6" • Keys:On/Off,inch/mmconversion(0.0005"/0.01mm),zerosetting • CanmeasurethediameterofInsidegroovesmallholes Inside GrooveDigital Caliper6" • ConformtoIP67andcanbeusedincuttingliquidconditions IP 67 Digital Calipers 06151L 06150L ItemNo.

0.0005"/0.01mm 0.0005"/0.01mm 0-8"/0-200mm 0-6"/0-150mm

Resolution Range Item No. Item No. Item No. 06160L 06095L 06020L

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS  1.5m-4.0m 0.01mm (0.0005") 7#battery(LR03)x2 For 10", 12" Calipers 4", 6", 8" Calipers

Power Resolution

10063L Item No. No. Item 10061L 10062L Item No. 06900L SPECIFICATIONS Single cable INCH/METRIC UNIT D DISPLAY LC • Can connect capacitive digital measuring instruments in which 150 KHz quartz oscillator is built to transfer and display data • Zero-setting at any position • Units conversion • Fixed at the back plate is a magnetic block which attaches on a piece of iron plate or fame to make it convenient to use • For Use with Digital Calipers or Scales! SET GAGE CENTERLINE holes, between different size • Checks distance from a hole. or to an edge center. • Cone will seek dial calipers. • Adapts to most figures. • Reads in exact alloy steel. • High grade CALIPER ACCESSORY KIT • Kit includes: 4 sets of points, 4 sets of screws, 1 set of clamp, 1 allen • Components are hardened. • Fits 4", 6", 8" dial, vernier and digital Caliper. 3 5

Range No. Item 06002L Range 06008L 0-4"/0-100mm 06034L 0-6"/0-150mm 06041L 0-8"/0-200mm 06056L 0-12"/0-300mm 0-20"/0-450mm Range No. of Flutes 0.16-1.6" 0.04-1.6"

ELECTRONIC CALIPERS & CALIPER ACCESSORIES & CALIPER CALIPERS ELECTRONIC

06055L 0-20"/0-450mm No. Item 06001L 06005L 06033L 06040L 0-4"/0-100mm 0-6"/0-150mm 0-8"/0-200mm 0-12"/0-300mm

Item No. 06180L 06190L • Keys: On/Off, inch/mm conversion (0.0005"/0.01mm), zero setting nvil Digital Caliper V- Digital • Can measure the diameter of cutting heads (such as taps,, end mills) with an odd number of 3 or 5 flutes • With two bracket located at either end of the scale • Resolution: 0.0005"/0.01mm cale Unit (Horizontal type) Scale Unit (Horizontal Digital • Keys: On/Off, Zero setting • Data hold, Presetting • In/mm conversion • With two bracket located at either end of the scale located at either end • With two bracket 0.0005"/0.01mm" • Resolution: ertical type) Unit (Vertical cale S Digital Zero setting • Keys: On/Off, • Data hold, Presetting • In/mm conversion  CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Carbide-tipped • Paintedframe • Mechanicaldigitalcounterforquickanderrorfreereading • 0.001"counterreadout • 0.0001"graduation Digital OutsideMicrometers &sets • 0.0001"Graduation • Anvilandspindlearehardenedprecisionground • Spindlelock • Carbide-tipped • Paintedframe • Ratchetstop Outside Micrometers &sets

16L 11-12" 10-11" 9-10" 31060L 8-9" 31055L 7-8" 31050L 6-7" 31045L 5-6" 30080L 4-5" 30070L 3-4" 30055L 2-3" 30045L 1-2" 30040L 0-1" 30030L 30020L 30005L Range Item No. 06L 11-12" 10-11" 40066L 9-10" 40065L 8-9" 40064L 7-8" 40063L 6-7" 40062L 5-6" 40061L 4-5" 40060L 3-4" 40050L 2-3" 40040L 1-2" 40030L 0-1" 40025L 40010L Range Item No. 53L 6-12" 0-12" 45032L 0-6" 45031L 0-4" 45030L 0-3" 45015L 45010L Range Item No. 55L 6-12" 0-12" 35050L 0-6" 35040L 0-4" 35030L 0-3" 35020L 35010L Range Item No.

OUTSIDE MICROMETERS

METRIC OUTSIDEMICrometers • 0.0001"Graduation • Anvilandspindlearehardenedprecisionground • Spindlelock • Carbide-tipped • Paintedframe • Ratchetstop Micrometers &sets solid metal frameOutsid • Resolution:0.001" • Range:0-0.6" • Chrome-platedframe Mini- Micrometer • Standardsincluded. • Microfinegraduations. • Fittedcase. • Meetsorexceedsfederalspecifications.Spindlelock. finishonends. • Hardenedandprecisiongroundanvilspindlethreadwithmicrolap • Graduation:0.001mm • Ratchetstop. • Carbidefaces. 43L 50-75mm 0-75mm(3pc/set) 25-50mm 34990L 0-25mm 34030L 34020L 34010L Item No.

305 2-3" 1-2" 0-1" 33015L 33010L 33005L Range Item No. 300 6-12" 0-12" 0-6" 36050L 0-4" 36040L 0-3" 36030L 36020L 36010L Range Item No.

Sizes

Item No. 30091L

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS  . .

J

J

K

Min dimension of measured diameter K Min dimension of measured diameter No. Item Sets Range 32110L 32115L 0-3"/0-75mm 32120L 0-4"/0-100mm 32130L 0-6"/0-150mm 0-8"/0-200mm No. Item 32101L Range 32102L 0-1"/0-25mm 32103L 1-2"/25-50mm 32104L 2-3"/50-75mm 32105L 3-4"/75-100mm 32106L 4-5"/100-125mm 5-6"/125-150mm

Item No. Type Range 39001L 39002L K 39003L K 39004L K 39011L K 39012L 0-1" 39013L J 1-2" 39014L J 2-3" J 3-4" J 0-1" 1-2" 2-3" 3-4"

Item No. Type Range 39021L 39022L K 39023L K 39024L 0-1"/0-25mm K 39031L 1-2"/25-50mm K 39032L 2-3"/50-75mm 39033L J 3-4"/75-100mm 39034L J 0-1"/0-25mm J 1-2"/25-50mm J 2-3"/50-75mm 3-4"/75-100mm Ball Anvil Micrometer • For measuring wall thickness of various tube • Carbide tipped • Resolution: 0.0001" Electronic Ball Anvil Micrometer • Deluxe micrometer head with 5 keys • In/metric conversion • Resolution: 0.00005"/0.001mm eter & set meter Micro Electronic 2-Key data set In/mm, ON/Off, origin • Functions: Abs/Inc, face. frame, Carbide measuring • Chrome-plated • Resolution: 0.00005"/0.001mm OUTSIDE MICROMETERS OUTSIDE

No. Item Sets Range 32015L 32020L 0-3"/0-75mm 32025L 0-4"/0-100mm 0-6"/0-150mm No. Item Sets Range 32215L 32220L 0-3"/0-75mm 32225L 0-4"/0-100mm 0-6"/0-150mm 32012L 7-8"/175-200mm No. Item 32005L Range 32006L 0-1"/0-25mm 32007L 1-2"/25-50mm 32008L 2-3"/50-75mm 32009L 3-4"/75-100mm 32010L 4-5"/100-125mm 32011L 5-6"/125-150mm 6-7"/150-175mm

32212L 11-12"/275-300mm No. Item 32201L Range 32202L 0-1"/0-25mm 32203L 1-2"/25-50mm 32204L 2-3"/50-75mm 32205L 3-4"/75-100mm 32206L 4-5"/100-125mm 32207L 5-6"/125-150mm 32208L 6-7"/150-175mm 32209L 7-8"/175-200mm 32210L 8-9"/200-225mm 9-10"/225-250mm 32211L 10-11"/250-275mm

• IP54 protection level set • Functions: Abs/Inc, In/mm, ON/Off, clock ,origin data • Chrome-plated frame, Carbide measuring face. • Resolution: 0.00005"/0.001mm eter & set IP54 3-Key Electronic Micrometer • Function: Abs/Inc, In/mm, ON/Off, Clock, power switch ,origin data set. power switch ,origin data In/mm, ON/Off, Clock, • Function: Abs/Inc, face. frame, Carbide measuring • Chrome-plated thimble • Ratchet friction 0.00005"/0.001mm • Resolution: eter & set meter Micro lectronic E IP54 5-Key level • IP54 protection 10 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Resolution:0.0001" • Blademeasuringfacesandnorotatingspindle de Micro meter Bla • Resolution:0.001" • 60or55degreev-shapedandknifeedgedinterchangeableanvils Screw ThreadMicrometer • Resolution:0.0001" • Discmeasuringfacesforgearsandpaperthickness Disc Micrometer • Resolution:0.0001" • Carbidetipped • Formeasuringdrills,groovesandhardtoreachdimensions Point Micrometer

39057L 39056L 39055L 39054L 39053L 39052L 39051L No. Item 46040L 46035L 46030L 46025L 46020L 46015L 46010L 46005L Item No. 38080L 38075L Range 38050L 38025L No. Item 39114L 39113L Range 39112L 39110L No. Item OUTSIDE MICROMETERS Range Range 3-4" 2-3" 1-2" 0-1" 3-4" 2-3" 1-2" 0-1" 6-7" 5-6" 4-5" 3-4" 2-3" 1-2" 0-1" 7-8" 6-7" 5-6" 4-5" 3-4" 2-3" 1-2" 0-1"

• Resolution:0.00005"/0.001mm • In/metricconversion • Deluxemicrometerheadwith5keys Electronic DiscMicrometer • Resolution:0.00005"/0.001mm • In/metricconversion • Deluxemicrometerheadwith5keys Electronic PointMicrometer • Resolution:0.00005"/0.001mm • In/metricconversion • Deluxemicrometerheadwith5keys de Micrometer Electronic Bla • Resolution:0.00005"/0.001mm • In/metricconversion • Deluxemicrometerheadwith5keys Electronic ScrewThreadMicrometer

307 6-7"/150-175mm 5-6"/125-150mm 4-5"/100-125mm 3-4"/75-100mm 39067L 39066L 39065L 39064L 39063L 39062L 39061L Item No. 39073L 39072L 39071L Item No. 94L 3-4"/75-100mm 2-3"/50-75mm 1-2"/25-50mm 0-1"/0-25mm 39044L 39043L 39042L 39041L No. Item Item No. 92L 3-4"/75-100mm 2-3"/50-75mm 1-2"/25-50mm 0-1"/0-25mm 39124L 39123L 39122L 39121L

2-3"/50-75mm 1-2"/25-50mm 0-1"/0-25mm

2-3"/50-75mm 1-2"/25-50mm 0-1"/0-25mm Range Range Range Range PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 11

Range

0.18" Range Range 0-1"/0-25mm

Minimum Hole size(dial) No. Item 39181L 39182L 0.3-1.2"/7.6-30mm 1-2"/25-50mm 1"

～ ke Bra Disc Electronic eter Microm head with 5 keys • Deluxe micrometer • In/metric conversion 0.00005"/0.001mm • Resolution: 0

No. Item 39101L 39102L 1-2"/25-50mm

No. Item 39081L 39082L 0-1"/0-25mm 1-2"/25-50mm No. Item Range 39115L

0-1" ELECTRONIC TUBING MICROMETER • Dimensions between a holp and an edge of other shaped pieces can be measured with these mecrometer • Measures wall thicknesses of parts with cylindrical walls • High contrast, clear LCD display Anvil Micrometer Electronic Multi- etc. height, head rivet distance, shoulder-edge thickness, tube • Measuring and measuring • with interchangeable (flat anvil and rod anvil) step height when removing anvils and clamp. • Chrome-plated frame. • Resolution: 0.00005"/0.001mm roat Micrometer Electronic Deep Throat • Deluxe micrometer head with 5 keys • In/metric conversion • Resolution: 0.00005"/0.001mm 1-2"

OUTSIDE MICROMETERS OUTSIDE No. Item 39171L 39172L Range 0.3-1.2"

ke Bra Disc Digital eter Microm 0.0001" • Resolution: 0.001" • Counter readout:

0-1" 1-2" 0.19" 0-1" 1-2" Minimum Hole size(dial) 1" ～ 1-2"

No. Item 37005L 37006L Range Item No. 39091L 39092L Range No. Item Range 39111L 0

39192L Item No. 39191L Range 0.3-1.2" or from a holp to an edge. • Graduation: 0.0001". • Locking clamp with ratchet stop. • Carbide tipped spindle. 0-1" PRECISION TUBING MICROMETER • For measuring wall thickness of tubing or other cylindrical walls, roat Micrometer Deep Throat metal, paper and • Deep throat frame for measuring thickness of sheet sheet plastic • Resolution:0. 0001" etc. with interchangeable anvils (flat anvil and rod anvil) and measuring etc. with interchangeable anvils (flat anvil and rod step height when removing anvils and clamp. • Chrome-plated frame. • Resolution:0.0001" Anvil Micrometer Multi- rivet head height, • Measuring tube thickness, shoulder-edge distance, • Resolution:0. 0001" • Resolution:0. eter m Brake Micro Disc depth of grooves • For measuring of brake systems. on the disc 12 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Resolution:0.00005"/0.001mm • In/metricconversion • Deluxemicrometerheadwith5keys Electronic InsideMicrometer • Counterreadout:0.001" • Resolution:0.0001" Digital DepthMicrometer • Resolution:0.0001" • Interchangeablerodsprovideawidemeasurementrange. Depth Micrometer

94L 7-8"/175-200mm 6-7"/150-175mm 5-6"/125-150mm 39148L 4-5"/100-125mm 39147L 3-4"/75-100mm 39146L 2-3"/50-75mm 39145L 1-2"/25-50mm 39144L 0-1"/0-25mm 39143L Range 39142L 39141L ItemNo.

74L 0-12" 0-8" 0-6" 0-4" 0-2" 0-1" 47040L 4" 0-12" 47030L 0-8" 47020L 0-6" 47010L 47002L 0-2" 47001L 0-1" 0-4" 47035L 47025L 2-1/2" 47015L 47005L 47004L Range 47003L BaseSize ItemNo.

71L 0-12" 0-8" 0-6" 0-4" 0-2" 0-1" 47116L 4" 0-12" 47115L 0-8" 47114L 0-6" 47113L 47112L 0-2" 47111L 0-1" 0-4" 47106L 47105L 2-1/2" 47104L 47103L 47102L 47101L Range BaseSize No. Item

DEPTH MICROMETERS&INSIDE

Inside Micrometer T Set Tubular Electronic DepthMicrometer Inside Micrometer CaliperT • Resolution:0.001" • Suppliedwithastandardcalipergageforzerosetting. • Thecombinationofextensionrodsprovidesawidemeasuringrange. IP54 prooflevel • Resolution:0.0001" • 0.2-1.2",1-2"micrometersfurnishedwithsettingrings • Formeasuringvariousinsidedimensions

96L 4-60" 4-56" 4-52" 39166L 4-36" 39165L 4-20" 39164L 4-5" 39163L 2-60" 39162L 2-40" 39161L 2-24" 39160L 2-20" 39159L 2-12" 39158L 2-10" 39157L 2-7" 39156L 2-6" 39155L 2-4" 39154L 2-3" 39153L 2-2.5" 39152L 39151L Range 39150L Item No.

93L 0-12" 0-8" 0-6" 0-4" 0-2" 0-1" 39432L 4" 39428L 0-12" 0-8" 39426L 0-6" 39424L 39422L 0-2" 39421L 0-1" 0-4" 39412L 39408L 2-1/2" 39406L 39404L 39402L 39401L Range BaseSize Item No.

93L 7-8" 6-7" 5-6" 39138L 4-5" 39137L 3-4" 39136L 2-3" 39135L 1-2" 39134L 0-1" 39133L 39132L Range 39131L Item No.

ype

ype

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 13 30004L 49002L 49001L Item No. Item No. Item No.

Item No. 30002L Material 30001L Fe Al

Micometer stand is unique designed for easy locking and carrying around. carrying and locking easy for designed unique is stand Micometer d Stan Micrometer SPC system For the toolroom, repetitive part measurement and any D STAN BLE MICROMETER PORTA • • Stand can be folded to dimension:4.6"×3.2"×1.5" • Lacquered cast iron stand weighing 2 lbs. RING SET MEASU D WIRE THREA different sizes. • 48 wires; 16 60° thread • Measures all per inch. • 3 to 48 threads included. • Laminated chart to 6mm. metric threads from .5mm • Measures all vinyl case. • Complete in UTSIDE HMENT KIT FOR O 7PC ANVIL ATTAC MICROMETERS • Turns your micrometer into 7 different tools. comparator. • Set contains: ball, spline, knife, super spline, blade, • Fits all brand outside micrometers. must be • Attachments other than ball are .500" long. This mount subtracted from the total reading. • Hardened and ground.

Item No. Set Range 39310L 39315L 39320L 0.5-0.8" 39325L 0.8-2" 39330L 2-4" 3-3.5" 3.5-4"

39530L 2-4" Item No. Set Range 39515L 39520L 0.5-0.8" 0.8-2"

Sets Sets

No. Item 39201L Range 39202L 0.3-1.2" 1-2"

INSIDE MICROMETERS & MICROMETER ACCESSORIES MICROMETER & MICROMETERS INSIDE

39510L 3.5-4" Item No. Range 39501L 39502L 0.5-0.65" 39503L 0.65-0.8" 39504L 39505L 0.8-1" 39506L 1-1.2" 1.2-1.6" 39507L 39508L 1.6-2" 39509L 2-2.5" 2.5-3" 3-3.5" 39308L 39309L 39310L 2.5-3" 39311L 3-3.5“ 3.5-4“ 4-5" No. Item 39301L Range 39302L 0.5-0.65" 39303L 0.65-0.8“ 39304L 39305L 0.8-1" 39306L 1-1.2“ 39307L 1.2-1.6" 1.6-2“ 2-2.5"

• Carbide-tiped contact points • Supplied with seting rings • Resolution: 0.00005" • More Sizes On Call Electronic 3-Point Internal Micrometer • IP54 level • Digital micrometer head with 2 keys • Self centering 3-point for accurate measurement of internal diameters • Self centering 3-point for accurate measurement of internal diameters • Self centering 3-point for accurate measurement of • Supplied with setting rings • Resolution: 0.0001" • More Sizes On Call 3-Point Internal Micrometer meter Micro Indicating • Retractable anvil with a indicator for precision measurement of anvil with a indicator for precision • Retractable parts mass-produced 0.0001" • Resolution: 14 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • 0.1mmgraduation • Lugback. • Stem:8mm • 2"diameterdialface. • Jeweledmovement. • Racks&contactpointmadeofhardenedstainlesssteel. • Reading:0-100 METRIC DIALINICATOR • Lugback • Bezeldiameter:2-3/8" • Outsidemetricandinsideinch atthesametime • Readinchandmetriconthedialface Dual DialIndicator flatorlugbackforchoice • Colorsofdialandneedle, • Stemdiameter3/8" • Interchangeablehardenedcontactpoint • ManufacturedaccordingtoASME/ANSIStandard Dial Indicators

0.001"/0.01mm 0-1"/0-25mm 20038L Range Item No. 05L " .0" -/" u Black White Lug White Black Lug White Lug 2-3/8" Lug 2-3/8" White Lug White 2-3/8" 0.001" Black 2-3/8" Lug 0.001" Lug 2-3/8" 0.0005" Lug White 0.001" 2" White 2-3/8" 0.001" 2-3/8" 2" White Lug 2-3/8" 1" White Lug 20055L 0.0005" 1" Flat 0.001" 20045L 1" Lug 0.001" 2-3/8" 20032L 2-3/8" 0.5" 20029L 1-3/5" 0.5" 20025L 0.0005" 1-3/5" 0.5" 20018L 0.001" 20015L 0.001" 0-0.25" 20014L FaceColor 0.001" 0-0.25" Back 20010L 0-0.25" 20008L 0-0.25" Dia. Bezel 20013L Graduation 20012L Range Item No. 02L 0-20mm 0-10mm 20125L Range 20115L Item No.

Graduation INDICATORS

Specification: • One2.07"centerpointfeeler • Eachof1.77",4"and6.06"curvedfeeler. • Eachof1.77",4"and6.06"straightfeeler. automaticreversal. • 180°swivelling,twodirectionalfunctioncontactpointwith Co-A • .001"graduation • Rotatablebezel. • Madeofstainlesssteel. • Dialfacediameter:l-3/8" • ConformstoAGDstandards. • Reading:0-100 • Easytoreadfromtop. BACK PLUNGEDIALINICATOR Repeatability: 0.0004" Tang Diameter:3/4"or0.79" Axial Graduation:0.0005" Radial Gradation:0.0005" Axial Range:0-7/32" Radial Range:0-3/8" Stylus alwaysreturnstosamepositiononthedial. , CNCandEDMmachines. Easily findsedge,centerordepth.Usewithjigbore,millingmachines, 3D Indicator Location Accuracy: +/-0.0002" Feeler Ball1/8"dia. Shank: 3/8"dia.x7/8"long Length: 6-7/8" x Indicator

Item No. 26005L

0.0005" 0-0.12" Range 26010L Item No.

01L 0~0.20" Range 20610L Item No.

Resolution

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 15 NEW Range Meas.Force 0~18" /0~450MM 0.00005“ Item No. Range 24126L 0~0.5"

No. Item 20050L Range Graduation INDICATORS

No. Item Reading 29010L 0.00005" ±0.0020" 1N • Shock-proof. • .00005" Graduation. ELECTRONIC DEPTH GAGE KIT • True inch/mm conversion • Resolution: 0.0005" /0.01mm. • On/Off switch • Zeroresetbutton allows absolute or comparative style measurements. • 8 rod extensions can be connected together for a full 0-18" capacity. • 2-1/2" base • Supplied in wooden fittde case II GAGE HICKNESS T DIGITAL Range • 0~0.5"/0-12.5mm graduation. • .0005"/.01mm • Aluminum handle • Inch/mm conversion at any position • Zero-setting On/Off • Auto power PRECISION DIAL COMPARATOR ULTRA • Allows high mesaurement accuracy and minimal hysteresis. • Made of stainless steel hardened and ground. • Jewelled movement. • Self-contained movement. • Lockable screw with fine adjustment.

Graduation No of Rods Graduation Throat Depth No. Item 24116L Range 0~0.6"

No. Item Range 20040L 0-22" 0.001" 6

No. Item Range 24015L 0-0.5" 0.001" 0.5" ness Gage kness Thic et Pock • Provides rapid, direct reading measurements of depths • Uniform pressure over full range of travel • Supplied with fitted case Dial Depth Gage • Adjustable and reversible dome/flat lower anvil. • Inch/mm conversion • Zero-setting at any position • Auto power On/Off THICKNESS GAGE DIGITAL • 0~0.6"/0-15mm Range • .0005"/.01mm graduation. • Convenient "push-down" spindle style • Gage has small count hand for recording each revolution of large hand large of revolution each recording for hand count small has Gage • up to 3/8" thick • Checks material plastic case • Furnished in • Nearly the size of a thin pocket watch • Nearly the size • Flat contacts 16 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Resolution:0.0005" • Largecapacitybatterycanbeusedforlongtime • Measuringdataoutputtoexternalprocessor • Zerosetatanyposition • Measuringunitconversionatanyposition • LargeLCDforreadingeasily Electronic Indicator 3Key • DataoutputRS232 arollerorshaftdirectly • Tomeasuredifferenceoftolerance • Presetupperlimitandlowerlimit. • Relativemeasurement&absolute • Inch/Metricconversion • Doubledisplay:Digitalandelectronicscales • 360degreerotation • ExtralargeLCD Electronic Indicator 5Key • Orangebackgroundmakesdisplaystriketheeye • Resolution:0.0005"/0.01mm • Lugbackorflatisselectable dataprocessor • Themeasurementdatacanbeoutputtoanexternal inmeasurements • Thedigitalindicatorpresentserrorfreedgitalreading Electronic Indicator 5Key 47L -"02m Orange Orange 0-1"/0-25mm 0-0.5"/0-12.8mm Range 24076L 24071L ItemNo. 48L -"02m Black Color Black 0-1"/0-25mm 0-0.5"/0-12.7mm" 24085L 0-0.5"/0-12.7mm Range 24075L 24050L ItemNo.

200 005/-27m 0.00005"/0.001mm 0-0.5"/0-12.7mm Range 24080L Item No.

INDICATORS

Resolution

NEW

Display Display

• ButtonbatterySR44,1.55V • Easyadjustingforstandardorreversereading. stylemeasurements. • Zeroresetbuttonallowsabsoltteorcomparative • Trueinch/mmconversion 2" ElectronicINDICATOR • Zero-settingatanylocation; • Inch/metricconversion Electronic Indicator Horizontal T • 0.0005"/0.01mmresolution • Suppliedwithfittedcase. 47L -"02.m 0.0005"/0.01mm 0-1"/0-25.4mm Range 24070L Item No.

o Rne Resolution 0.0005"/0.01mm 0-0.5"/0-12.7mm Range 24090L Item No. ype ElectronicIndicator 41L 0~2"/0~50mm Range 24210L Item No.

Resolution PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 17

etter xis S

Graduation

INDICATORS 21005L 87033B 87050B 87032B Item No. Item No. Item No. Item No.

No. Item Range 26015L 26020L 2" 4" 0.001" 0.001"

• Zinc cost housing • 5 Different locations for mounting accessories:3 Positions 1/4 - 20 for lug mounts; 1 Tapped hole 10 - 32; 1 Reamed hole 3/8" diameter • Size: 4-1/2" x 1" x 1-1/4' • Magnetic pull - 45 lbs icator Holder Universal Indicator indicator 4-1/2" Clamping dia. 1-7/8"length from clamping racket to Indcator is not included Test Base Direct Mount Magnetic • Permanent magnet • 2.25" Diameter x 0.55" thick • Direct mount onto dial indicator • For AGD 2 dial indicators MIGHTY BASE MAGNETIC recision Dial Z-A Dial Precision CNC Machine Centers zero-setting instrument for • Mechanical point with build-in indicator establishing of “0" reference • Fast and sure easy reading indicator of zero position with • Positive alignment against damage from overrun setting face to safeguard • Spring loaded 0.0004" accuracy and repeatability: • Positioning and 2" height • 1.45" Point Kit 22 Pc. Indicator 22 different tool • Turns your indicator into • Fits all brand dial indicator

25060L

Item No.

No. Item 25002L Range 0-0.02"/0-0.5mm 0.0005"/0.01mm Resolution No. Item Range 25010L Dia. Face Reading Face Color 25020L 0-0.03" 25025L 0-0.03" 25030L 0.0005" 0-0.03" 25040L 0.0005" 1.25" 0-0.008" 1.25" 0.001" 0.0001" 0-0.008" 1.25" 0.0001" 1.58" White 1.25" Black White White Black

No. Item Range 25041L Reading 25042L 0-0.03" 0-0.008" 0.0005" 0.0001"

Vertical StyleTest Indicators Dial • Horizontal type • White Face Test Indicators Dial 0.06" Travel • Graduation: 0.0005" Dial read 0-15-0 • Manual power On/Off • Zero setting at any position • Metric/Inch conversion at any position Indicator Electronic Test • Contact point with automatic reversal • Contact point mounted .080" ball diameter • Carbide contact icators Test Ind Dial dovetail clamps (3/8 & 5/32") • It includes 2 & two directional function • 180° swiveling 18 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS Digital DialHeightGagesT • Reading"0.0005"/0.01mm computerandprinterfordataoutput • Presetmemorizingfunctions,maybeconnectedwith • Abs/Incmeasuringswitch • Largescreen,metricandBritishsystemstransformation • Platechromium,spraypaintandsprayplasticforbase • Drivetrain,positionprecision;withFineadjustment,easymovement Electronic HeightGagesT • WatchbatterySR44,1.55V • Reading:0.001"/0.01mm • Stainlesssteelbaseprecisionground • Carbidetippedscriber • HighcontrastLCDwithfineadjustment • Inch/metricswitchable • On/Offswitch • Doublebeam Electronic HeightGagesT • Furnishedwithfittedwoodencase • PositiveLockingscrew • Finefeedadjustment • CarbidetippedScriberforlongerlife • Madeofhighqualitystainlesssteelandsatinchromefinish Dial HeightGagesSingleBeam • Stainlesssteelpolishedbeams • Withfine-adjustingwheelandlock groundandlappedformaximumflatness • Bottomsurfaceofthebaseisharderned, • Error-proofdigitalcountercomeswithzeroresetbutton • Carbidetippedscriber-wearfree

Black White Black 0.001" 0.001" White 0.001" 0-12" Black 0.001" 0-12" White 58011L 0-8" 0.001" 58010L 0-8" 0.001" 58008L 0-6" 58006L 0-6" 58004L 58003L Reading Face Color Range Item No. 0.001" 0.001" 0.001" 0.001" 0-24" 0-20" 0-18" 60025L 0-12" Reading 60022L 60020L Range 60010L Item No. 07L 0-24"/0-600mm 0-20"/0-500mm 0-18"/0-450mm 0-12"/0-300mm 60170L 60160L 60150L 60140L Item No. 06L 0-24"/0-600mm 0-20"/0-500mm 0-18"/0-450mm 0-12"/0-300mm 60060L 60055L 60050L 60040L Item No.

Range Range

HEIGHT GAGES

win BeamsII win BeamsI win Beams

• Reading:0.0005"/0.01mm fordataoutput • Maybeconnectedwithcomputerandprinter • Presetmemorizingfuction • ABS/INCmeasuringswitch • Platechromium,spraypaintandplasticforbase • Inch/metricconversion • Largedisplayscreen • Madeofstainlesssteel Electronic HeightGagesSingleBeamII • Displaypresettingfunction • Carbidetippedscriber-wearfree • Inch/mmconversion • Zerosettingatanyposition • ManualpowerOn/Off Electronic HeightGagesSingleBeamI Parallax freedesigntoavoidopticalerror Vernier HeightGagesP • Withmagnifyingglass • Carbidetippedscriber • Stainlesssteelconstruction • Withfineadjustment Vernier HeightGages 0.0005"/0.01mm Reading 0-24"/0-600mm 0.0005"/0.01mm 0-20"/0-500mm 62030L 0.0005"/0.01mm 0-18"/0-450mm 62020L 0.0005"/0.01mm 0-12"/0-300mm 62015L Range 62010L Item No. 54L -4/-0m 0.001"/0.02mm Reading 0.001"/0.02mm 0-24"/0-600mm 0.001"/0.02mm 0-20"/0-500mm 65140L 0.001"/0.02mm 0-18"/0-450mm 65130L 0-12"/0-300mm 65120L Range 65110L Item No. 0.001"/0.02mm 0.001"/0.02mm 0-60"/0-1500mm 0.001"/0.02mm 65050L 0-40"/0-1000mm 0.001"/0.02mm 0-24"/0-600mm 65040L 0.001"/0.02mm 0-20"/0-500mm 65030L Reading 0.001"/0.02mm 0-8" 0-18"/0-450mm 65023L 0-6" 0-12"/0-300mm 65020L 65010L 65002L Range 65001L Item No.

24L 0-24"/0-600mm 0-20"/0-500mm 0-18"/0-450mm 0-12"/0-300mm 62140L 62130L 62120L 62110L Item No.

Range

0.001" 0.001"

arallax free arallax

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 19

9 9 4 12

Range probe depth No.ofAnvils

No. Item Range 70501L Graduation 70502L Depth 0.24-0.4" 70503L 0.4-0.7" 0.0001" 70504L 0.7-1.5" 0.0001" 70505L 1.57" 1.4-2.4" 0.0001" 70506L 0.0001" 70507L 2-6" 4" 6-10" 5" 10-16" 0.0001" 6" 0.0001" 0.0001" 6" 16" 16" No. Item Range 70201L Graduation 70202L Depth 0.24-0.4" 70203L 0.4-0.7" 0.0005" 70204L 0.7-1.5" 0.0005" 70205L 1.57" 1.4-2.4" 0.0005" 70206L 0.0005" 70207L 2-6" 4" 6-10" 5" 10-16" 0.0005" 6" 0.0005" 0.0005" 6" 16" 16" No. Item 71202L .40~.70"/10~18 mm 71203L .70~.1.5"/18~35mm 71204L 1.4~2.4"/35~50mm 71210L 4" 6" 2~6"/50~150mm 6" 7"

• Easy setting with micrometers or ring gages • Fitted case with anvils index BORE GAGE DIGITAL • Graduation: 0.00005" • Extra large LCD, 360° rotation • Dual display: digital and electronic scale • True inch/mm conversion • Zero reset allows absolute or comparative measurements • One button easy calibration • Power supply: 3V CR2032 lithium battery Set Bore Gage Dial taper & roundness measurements of holes, • For close tolerance dial indicator with AGD Group II • Gages are supplied • Self centering gages with micrometers or ring • Easy setting with anvils index • Fitted case .0001" Dial Bore Gage Set roundness • For close tolerance measurements of holes, taper & • Gages are supplied with AGD Group II dial indicator • Self centering DEPTH GAGES & BORE GAGES & BORE GAGES DEPTH

Range 6"/150mm 8"/200mm 12"/300mm

Item No. 07005L 07010L 07015L Item No. Range Resolution 47130L Revolution 47140L 0-6" 47150L 0-8" 0-12" 0.001" 0.001" 0.1" 0.001" 0.1" 0.1"

47040L 47050L 0-8"/200mm 0-12"/300mm 0.0005"/0.01mm 0.0005"/0.01mm Item No. 47030L Range 0-6"/150mm 0.0005"/0.01mm Resolution ages h G Dept Electronic • Dual graduation systems for easy reading • Inch in red & metric in black Dual Dial Depth Gages • Graduation: 0. 001"/0.01mm Dial Depth Gages 20 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS Block Set • Withsizeslabeled • Withfittedwoodencase • Completewithmanufacturer’scalibrationorcertificate • Surfacehardness:HRC64 • Madeofthehighestqualitytoolsteel • GradeB:±50millionth;MeetsorexceedsFederalGGG-G-15C • Grade3=Bt:+8/-4millionth • Grade2=At:+4/-2millionth Square GaugeBlockSets Rectagular GaugeBlockSets

702 Crie 3 Carbide 3 2 70012G Ceramic Ceramic 3 2 70034G 70033G Ceramic Ceramic 70032G Steel 70031G Steel Steel 70030G 70020G Steel 70015G Steel 70010G Steel 70005G 70000G Item No. 702 81 70042G 70041G 70040G Item No.

GAGE BLOCKS

e Mtra Grade Material inSet Blocks Step SeriesofNominalSize NoofPcs ie tp Blocks inSet Step SeriesofNominalSize NoofPcs Grade Material

B B 3 2 3 2

0.1001-0.1009 1.000-4.000 0.050-0.950 0.101-0.149

81 36 81 36 36 81 81

0.0001 0.001 0.01 1 1.000/2.000/4.000 1.000/2.000/4.000 0.1001-0.1009 0.1001-0.1009 0.1001-0.1009 0.1001-0.1009 0.1001-0.1009 1.000-4.000 0.050-0.950 0.101-0.149 0.100-0.500 1.000-4.000 0.050-0.950 1.000-4.000 0.101-0.149 0.101-0.109 0.101-0.109 0.101-0.149 0.050-0.950 0.100-0.500 0.110-0.190 0.110-0.190 0.05 0.05 19 49 4 9 0.0001 0.0001 0.0001 0.0001 0.0001 0.001 0.001 0.001 0.001 0.001 0.01 0.01 0.01 0.01 0.01 0.1 0.1 1 1 1

te B 3 Steel Steel te 2 Steel 19 49 19 49 49 19 4 3 5 9 4 4 3 9 9 1 9 1 9 5 9 9 9 9 PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 21 8 8 8 8 8 8 8 8 8 8 8 8 27 27 18 18 14 14 27 27 18 18 14 14 11-1/2 11-1/2 11-1/2 11-1/2 11-1/2 11-1/2 11-1/2 11-1/2 Item No. 7194424 7194820 7195220 7195620 7196020 7196420 7196818 7197218 7197618 7198018 7198418 7198818 7199618 7191232 7191632 7192032 7192432 7192828 7193228 7193624 7194024 Item No. 7250427 Size 7250827 7251011 1/16" 7251411 Thread Per Inch 1/8" 7251511 1/4" 7251618 3/8" 7252011 1/2" 7252418 3/4" 7252508 7252611 1" 1-1/4" 7252708 1-1/2" 7253008 7253108 2" 2-1/2" 7254008 7255008 3" 3-1/2" 7256008 4" 5" 6" Item No. 7220427 Size 7220827 7221011 1/16" 7221411 Per Inch Thread 1/8" 7221511 1/4" 7221618 3/8" 7222011 1/2" 7222418 3/4" 7222508 7222611 1" 1-1/4" 7222708 1-1/2" 7223008 7223108 2" 2-1/2" 7224008 7225008 3" 3-1/2" 7226008 4" 5" 6" Finest wear-resistant steel - lapped finish. Finest wear-resistant for long life & stability. Treated and processed read Gages Pipe Th aper NPT L-1 THREAD RING GAGE T • • NPT PIPE PLUG GAGE Item No. 3A THREAD GAGES THREAD 7184424 7184820 7185220 7185620 7186020 7186420 7186818 7187218 7187618 7188018 7188418 7188818 7189618 2A 7181232 7181632 7182032 7182432 7182828 7183228 7183624 7184024 "Thread Ring Gage Set Go - No Order No. Order No. 3A 7146420 7146818 7147218 7147618 7148018 7148418 7148818 7149618 7141232 7141632 7142032 7142432 7142828 7143228 7143624 7144024 7144424 7144820 7145220 7145620 7146020 7186408 7186412 7186414 7196408 7187207 7196412 7187212 7196414 7188007 7197207 7188012 7197212 7188806 7198007 7188812 7198012 7189606 7198806 7189612 7198812 7199606 7199612 7181024 7181032 7181224 7191024 7181228 7191032 7181620 7191224 7181628 7191228 7182018 7191620 7182024 7191628 7182416 7192018 7182424 7192024 7182814 7192416 7182820 7192424 7183213 7192814 7183220 7192820 7183612 7193213 7183618 7193220 7184011 7193612 7184018 7193618 7184810 7194011 7184816 7194018 7185609 7194810 7185614 7194816 7195609 7195614 2A 7180440 7180448 7180540 7190440 7180544 7190448 7180632 7190540 7180640 7190544 7180832 7190632 7180836 7190640 7190832 7190836 Thread Ring Gages Set Go-No Go Go-No Set Gages Ring Thread

7144011 7142416 7142424 7142814 7142820 7143213 7143220 7143612 7143618 7144018 7144810 7144816 7145609 7145614 7146408 7146412 7146414 7147207 7147212 7148007 7148012 7148806 7148812 7149606 7149612 7140440 7140448 7140540 7140544 7140632 7140640 7140832 7140836 7141024 7141032 7141224 7141228 7141620 7141628 7142018 7142024 7136420 7136818 7137218 7137618 7138018 7138418 7138818 7139618 7131232 7131632 7132032 7132432 7132828 7133228 7133624 7134024 7134424 7134820 7135220 7135620 7136020 20UNEF 18UNEF 18UNEF 18UNEF 18UNEF 18UNEF 18UNEF 18UNEF 32UNEF 32UNEF 32UNEF 32UNEF 28UNEF 28UNEF 24UNEF 24UNEF 24UNEF 20UNEF 20UNEF 20UNEF 20UNEF 2B Order No. 3B Order No. 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-5/16" 1-3/8" 1-1/2" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" Size 12 1/4" 5/16" per in. Thread 2B Item No. 3B Item No. 1-3/8" 1-1/2" 12UNF 1-1/2" 6UNC 12UNF 7138812 7139606 9139612 1-1/8" 12UNF 1-1/4" 1-3/8" 12UNF 6UNC 7137212 7138012 7138806 3/4" 7/8" 7/8" 16UNF 9 UNC 1" 14UNF 1" 1" 1-1/8" 8 UNC 7134816 12UNF 7135609 7 UNC 1-1/4" 7135614 14 NS 7 UNC 7136408 7136412 7137207 7136414 7138007 1/2" 9/16" 9/16" 20UNF 12UNC 5/8" 18UNF 5/8" 3/4" 11UNC 7133220 18UNF 7133612 10UNC 7133618 7134011 7134018 7134810 3/8" 3/8" 7/16" 16UNC 7/16" 24UNF 14UNC 1/2" 20UNF 7132416 13UNC 7132424 7132814 7132820 7133213 12 1/4" 1/4" 28UNF 5/16" 20UNC 5/16" 28UNF 18UNC 24UNF 7131228 7131620 7131628 7132018 7132024 6 8 8 40UNF 10 32UNC 10 36UNF 12 24UNC 32UNF 7130640 24UNC 7130832 7130836 7131024 7131032 7131224 4 4 5 40UNC 5 48UNF 6 40UNC 44UNF 7130440 32UNC 7130448 7130540 7130544 7130632 Size Thread per in. End Gage Doule Double End Gage Doule End Thread Plug Gages with Handles ational Extra Fine Plug & Ring Gages National ages & Ring G Gages d Plug Threa in “X" tolerance • Gages are made Thread Plug Gages with Handles 22 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Satinchromefinishandeachgagesizeismarked convexandconcaveradiieasily. • Eachgagehasfivemeasuringsurfaceforcheckingradius, 8PC RADIUSGAGESET • Suppliedwithpouch. 1/2primaryandcomplementaryangles. • Eachgagechecksprimary, -inoroutofthemachine. • QuickinspectionofanglesandI.D.orO.D. • Eachgagehaseightgagingsurfaces. • Stainlesssteelandsatinchromefinished. 18PC PRECISIONANGLEGAGESET • Withhandygageholders rustandstainresistant • Madeofsatinfinishstainlesssteel, bothconvexandconcaveradius • Fivedifferentgaugingsurfacesoneachgagefor Radius GageSet • thereadingofconcentrationwillappear. • • • Brine,Cleaningfluid,batteryandIndustrialfluidsetc. • REFRACTOMETER *More specificationsoncall 4h 32 30 &9/32"-1/2"by32ths 17/64-1/2"by64ths 1/32-1/4"by64ths 71015G 71010G o Rne No.ofPieces Range Item No.

ATC: AutomaticTemperatureCompensation. Drop somesolutionontheprismandmakeittowardstosunlight,then Easily usedandcompetitiveinprice Specially designedformeasuringtheconcentrationofmanykindssolution Can detectCoolant,Antifreeze,Juices,Beverages,Honey,Saltwater, 792 03% .0 ±.0 Ac Coolant Atc Without Without ±0.20% ±0.20% 0.20% ±0.10% detectfor 0.20% Remark 0-32% 0.10% 0-32% 70912G Accuracy 0-18% 70911G Min.Div. 70910G Range Item No. 71005G 1/64"-17/64" by64ths

705 8pc(l-l/16~l-l/2" by16ths) 8pc( 9/16-1"by16ths) 71035G 71030G Item No. o Primary 71020G Item No.

OTHER GAGES

5° 25 ～ NEW Range 90° by5° Angle

t Coolant Atc Coolant Atc

• Angles&edgesarehardenedandprecisionground • StandardforgrindingandsettingtoolswhencuttingAcmethreads 29 DEGREEACMESCREWTHREAGAGE threads. • Narrowdesignedbladepermituseforinternalandexternalscrew • Bladesprotectedinsturdysteelcase. • Eachbladeclearlymarkedwithproperthreadsize. • Correctpitchisdeterminedbymatchingbladeteethwiththreaders. PRECISION SCREWPITCHGAGES • Completeinvinylpouch. • Marksofwiresizeonfront,decimalequivalentsback • Madeofhardenedsteelandsatinchromefinish. • Measuresgaugeno.from36to0(.003-.3125). • Formeasuringwirediameterandnon-ferroussheets. WIRE MEASURINGGAGE • AccuracymeetsFederalSpecifications. • Micro-finegraduations • Graduated in 14ths and 20ths on one side and 24ths and 32nds on the other CENTER GAGE55DEGREE

702 46TI5&2~m6° 52 4~84TPI60° No.ofleaves .25~2.5mm60° 4~62TPI55°&.25~6mm60° 71042G ThreadRange 71041G 71040G Item No. 16G WhitworthorEnglishStandard55° 71065G 71060G No. Item

17G 36~0 71070G No. Item

Item No. 71050G Standard 60° Type Range 51 28 PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 23

E F

No. Item 72020G 72025G Range 1/8-1/2" (full ball) 1/8-1/2" (half ball)

70048G Item No.

OTHER GAGES OTHER No. Item 72015G 72016G Material Chrome plated Tin-coated Small Hole Gage • Small hole gages with full ball for very accurate measurements • Easy to adjust with full spherical, hardened,satin-chrome plated measuring faces • Set furnished in plastic pouch Planeraper gage & Sh rod 6-1/4" with extension • Maximum range easy of planer and shaper tools • Makes setting or caliper and bring cutting micrometer, surface gauge • Set gauge with with it tool in contact cuts thus eliminating trial a reliable starting point, • Gives the operator to level large plates for conjunction with dial indicator • Also use in planing, etc Telescoping Gage measurements. inside of checking quick for ) centering (self action • Double • Constant spring tension for uniform feel ground on a • Contact point ends are hardened tool steel and Precision radius of the smallest hole the gage will enter • Supplied in a fitted carrying case

Specification A Range Length 2-1/8~3-9/16" 5/16~1/2" 1-1/4~2-1/8" 1/2~3/4" 3-9/16-6" 3/4~1-1/4" 4" B 4" C D 4" 5" 5" 5"

71080G Item No. 70400G Item No.

70317G .917-1.000" +.0002" 84 70305G 70306G 70307G .751-.832" 70310G .833-.916" .917-1.000" 70311G -.0002" 70312G .011-.060" -.0002" 70313G .061-.250" -.0002" 70314G .251-.500" +.0002" 70315G .501-.625" 82 +.0002" 70316G .626-.750" 84 +.0002" 84 .751-.832" +.0002" 50 .833-.916" +.0002" 190 +.0002" 250 +.0002" 125 125 82 84 No. Item 70300G Range 70301G 70302G .011-.060" 70303G .061-.250" Tolerence 70304G .251-.500" No. of Piece -.0002" .501-.625" -.0002" .626-.750" -.0002" -.0002" 50 -.0002" 190 250 125 125

1 Extra Block: 1.000" Set Includes: 001" 9 Blocks: .101 to .109 by. 15 Blocks: .050 to .190 by .010" 100" 9 Blocks:. 200 to 1.000 by. 2 Blocks: .0625" and . 125" • Work surface hardened to 57-60 RC • Four connecting screws are included to make any length desired. • Made of precision tool steel. • Individually marked. • Meets or exceeds federal specification. • Complete in fitted case. K SET LOC B 36PC SPACE holes and measuring hole size • Furnished in plastic case • Centerless finish with 10 micro finish or better • Centerless finish with 10 • Inspected to tolerance • Increments of 0.001" • Uniform 2" overall length • Members marked with size • For use of checking locations, distance between Pin Gage Set • Made of quality tool steel • Made of quality • 29 Holes GAGE 64ths • l/16 to l/2 by indicated by hole • Correct size 24 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Accuracy:±5min • Usinglasermarkingline • Adjustablebezel • Fineadjustmentknobforsettingormeasuringofminuteangle • Hardenedstainlesssteelwithsatinchromefinish Universal BevelProtractorwithMagnifier • 6"longblade • Carbonsteelchrome-plated • Measuringrange:0-1800 L • 4pcSet2,3,4&6" • Beamgroundandlapped • Fullyhardened • Accuraterightanglesbothinsideandoutside • Madefromfullyseasonedtoolsteel MACHINIST STEELSQUARES • AccuracyclassH • Beamgroundandlapped • Fullyhardened • Madefromasinglepieceoffullyseasonedtoolsteel • Squareshaveaccuraterightanglesbothinsideandoutside • Beveledbladeonbothsides PRECISION BEVELEDGESQUARES 51L on 3-3/8" 3-3/8" Round Rectangular 55010L 55015L ProtractorDia. HeadShape Item No. ocking T

i 6",12" min 5 0~360° Blade 55020L Reading Graduation No. Item 50L 2' 8'' 6'' 4'' 12'' 9'' 6'' Beam 55108L 55106L Size 55104L No. Item 51L 6×4" 4×2-1/2" 55115L Size 55110L Item No. ype Protractors

SQUARES &PROTRACTORS

Electronic Digital Protractor Universal DialProtractor 4Piece • Measuringrangeselectable • Zerosettingatanyposition • Stainlesssteelthroughout • Hardenedstainlesssteelconstructionthroughout • Clockwiseorcounterclockwisereading • Indicatorpointershowseachdegreeandfiveminutesofangle • Doubleindexedprotractorgraduatedat180degreeinbothdirection • Setincludes:squarehead,centerhead,protractorandblade • Hardenedstainlesssteel • Microfineadjustment • Accuracy:±15’ 61L 2 4R-8ths,16ths,32nds,64ths 12" 56010L Range No. Item

6",12" 30" 0-3600 Blades Resolution 55030L Range Item No. i 6",12" 5 min 0~360° Blade Reading 55025L Graduation Item No.

Graduation

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 25

STANDARD

No. Item Magnetic Pull 87016B 80kg(176Lbs)

No. Item Magnetic Pull 87023B 80kg(176Lbs) No. Item Magnetic Pull 87020B 60kg (132lbs)

No. Item Magnetic Pull 87010B 87017B 87015B 60kg(132Lbs) 87018B 80kg(176Lbs) Type 60kg(132Lbs) standard with fine adjustment 80kg(176Lbs) standard with fine adjustment

MAGNETIC TOOLS MAGNETIC ADJUSTMENT Magnetic Bases Flex Arm Magnetic • Stem flexes approx • 360 degree • Holds rigidly in any desired position • Extra heavy cable Dia. 0.1" • Quick locking clamp FINE Magnetic Base Universal Mechanical Arm Magnetic • Hold all style dial anddial test indicator • Multi-nimble joint for instant fixation at any position • With On/Off switch Magnetic Bases Magnetic • Fine quality permanent magnet switch • Smooth and easy On/Off capability • Horizontal and vertical positioning • Chrome plated rod and column mbly Asse Base Magnetic size: M8 x1.25 • Mounting hole • Depth: 7mm

ACE GAGE

70056L Item No. No. Item Range 70051L 12" No. Item Post Length 70055L 9" & 12" • Conforrrfs to most of AGD indicators. • Weight: 7 lbs • Heavy base allows any surface set-up. • Base is made of high grade tool steel hardened and precision ground. • With fine adjustment. • Max. Extension: 14" • Base Dimension: 8.90" Length x 2.30" Width D UNIVERSAL MEASURING STAN • BottomV- ground for cylindrical works. spindle can be adjustable be can spindle works. cylindrical for ground BottomV-groove • to any angle above or below base. • head hardened has spring control. • Base fully hardened throughout. STEEL SURF • Fine adjustment. • Retractable pins in base for working on flat surfaces. Large hand wheel provides fine adjustment Large hand wheel provides fine Stainless steel construction Furnished in deluxe wooden case lbs 4.8 Weight: Overall height 12" & special adaptors or dial gages with dovetail holders Holds test indicators range Large capacity positioning any position Can be locked in long Base 3" wide x 3.54" d fer Stan Trans stand for applications where the and lightweight. Perfect Compact in size from location to location. or needs to be transported is moved and/ 26 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • • • • SHIELDW SAFETY • with1/4"hole • Extensionrod:1/4"x3-1/2" • Base:1-3/16dia.&1"high Mini Magnetic Stand -T • On/Offknob • FineAdjustment • Unlimitedversatility • Camlockmechanism • Differentarmstylestochoosefrom CONTOUR MAGNETIC BASE • Magneticpull50lbs • 9"Reach • Base:1-7/16"x1-13/64"x1-13/32" Mini Magnetic Stand -T

permanent magnetwithstrongpowerpull180lbs.. Magnetic base:2.5"x2"2". Shield Dimension:12"xl0" Eyes protectionfromcuttingchips 70B Flexible UniversalMechanical General Fineadjustment 87704B 87703B 87702B styles Arm 87701B 87700B Item No.

Item No. 87075B None

Item No. Item No. /MAGNETIC BASE 87029B 87129B

MAGNETIC TOOLS

NEW

ype B ype A PUSH BUTTONMAGNETIC base • Withfineadjustment. (Height)x1-5/16"(Depth) • BaseSize:2"(Width)x1-3/4" • PowerPull:130lbs. • On/Offpushbutton • Overallheight:9". • HoldsmostofAGDdialandtestindicators MP ONAGNETIC BASE LA • Fineadjustable • AcceptsbothstandardtestandAGDindicators • On/Offlever • Powerful3"diametersuctiondisk • ldealforgraniteplatesandothernon-magneticsmoothsurface VACUUM BASEINDICATOR HOLDER • BaseDimension:2"(Width)x2-l/2"(Depth) • Superpowerpull130lbs. • Fitsdovetailand3/8"stemindicators. • Fineadjustment. • Multi-nimblejointforinstantfixatanydesiredposition. therodsabsolutelyrigid. • Knobturningcreatestensionandhighpressureonthejointstohold • Absolutesealedhydraulicsystem. HYDRAULIC MAGNETIC B ASE • BaseDimension:2"(Width)x2-l/2"(Depth) • Useregularscrew-onbulb(notincluded). • Powersupply:115V/60Hz1phase • 60VApowerrating • Flexablearmforanypositionadjustment • Guaranteedpowerpull130lbs • PowerfulmagneticbasewithOn/Offswitch

Item No. Item No. Item No. 87066B 87025B 87070B PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 27 air set) air set) air set) air set)

ets (9 P arallel Sets ets (8 P arallel Sets

1/2x1-1/4x6" 3/8" No. Item 87140B 71205G No. Item Dimensions Hole Size 71210G 1/4x3/4x6" 1/4x1-1/4x6" 1/4x7/8x6" 5/16" 1/4x1x6" 1/4x1-1/8x6" 3/8" 5/16" 1/4x1-3/8x6" 3/8" 5/16" 1/4x1-1/2x6" 7/16" 1/4x1-5/8x6" 7/16" 1/4x1-3/4x6" 1/2" 1/2" No. Item Dimensions Hole Size 1/2x7/8x6" 1/2x1x6" 1/2x1-1/8x6" 5/16" 1/2x1-3/8x6" 3/8" 5/16" 1/2x1-1/2x6" 7/16" 1/2x1-5/8x6" 7/16" 1/2x1-3/4x6" 1/2" 1/2"

1/4" Precision P • Accuracy: 0001" • Parallelism in height ±. 0002" to size in height iZER DEMAGNET On/Off switch. Operates on 110V AC with 1/2" Precision P • Accuracy: 0001" • Parallelism in height ±. 0002" to size in height /DEMAGNETIZER MAGNETIZER life. magnet for extended • Powerful permanent ABS plastics. box is made from durable • Shatterproof • 2.1" x 2" x 1.1". 87093B

Wt. MAGNETIC TOOLS & PARALLEL SETS & PARALLEL TOOLS MAGNETIC

Description Poles 87092B

No. Item 87086B

Size

87091B No. Item 87177B Item No. 87091B 87092B 87093B 3-1/2 x 1-1/8 x 1" 3-1/2 x 1-1/8 x 1" 3-1/2 x 1-1/8 x 1-1/2" Without arm With Center arm With side arm Item No. 87130B Size 87131B 87132B 4 x 7" 6 x 12" 8 x 20" Brass .040, Steel .157 Brass .040, Steel .157 22 lbs. Brass .040, Steel .157 40 lbs. 78 lbs. • Lower activated magnet. • Combination brass steel poles. PERMANENT MAGNETIC • Standard pole. • Powerful 180 lbs. of magnetic force per square inch. • Furnished with end stops. • Fitted case included KIT 2PC. FLEXIBLE STEM PLIER HOLDER • 0-1" travel indicator. • 12" flexible arm allows for easy positioning. • Locking clamp to a variety of surface. • Precision lateral adjustment controlled by large thumbscrew with 1/2" • Precision lateral adjustment travel. designed • Large 1/4" lug-back-type indicators mount in specially extension links that provide flexibility. 6" long, 1/4" • Accommodates small test indicators bu mounting the links. diameter stainless steel attachment in the extension HOLDERS BASE INDICATOR MAGNETIC indicators without changing rods indicators without • Full 360° swivel • Strong magnetic release pull with easy BASE MAGNETIC RELEASE EASY rod, has 3 diameters • Single universal popular to allow mounting 28 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Two1/4"holesareprovidedformounting • Gunbluedonnon-workingsurfacesforgreaterwear-resistance • Precisiongroundandhardened • 1/2",5/8",3/4"&7/8"width • 3"length • 5/32"thick 4 P • paired0.0001"inheight;HardnessRC50 • 0.0001"inparallelism 1-1/2,1-9/16,1-5/8&1-11/16"; 15/16,1,1-1/16,1-1/8,1-3/16,1-1/4,1-5/16,1-3/8,1-7/16, • Includes:20Parallelpairs-1/2,9/16,5/8,11/16,3/4,13/16,7/8, parallel sets 1/32" Ultra Thin20P • Parallelwithin0.0008"eachpair • Completewithfittedplasticbox • Madeofhighgradealloysteel,hardenedandground 1-1/8",1-1/4" • Includes10pairswiththefollowingheights:1/2",5/8",3/4",7/8",1", • 1/8"thickx6"length 10 P • Hardness:case-hardenedtoRC5562on2sides,topandbottomonly • Dimensions:within.001"allowance • Tolerance:Parallelto.0003"on2sides,topandbottom • Holesize:5/16" 3/16",1/2" Combination P 06G Steel Tin-coated Set 70065G Material70060G No. Item air 5/32x3"ThinP

13G Steel Tin CoatedSet 71235G Material 71230G Item No. air PrecisionThin

4Pair3/16&1/2x6"ParallelSet, Includes3/16x1",3/16x1-1/4", 4Pair1/2x6"ParallelSet 71225G 4Pair3/16x6"ParallelSet 71220G 71215G Item No.

Item No. 71245G

PARALLEL SETS 1/2x1-1/2",1/2x1-3/4"

air SuperPrecision arallel Set Dimensions arallel Sets arallel Sets

• AngleAccuracy:+/-10minutes • Squareness:0.0002" • AngleofVee:90° • Hardness:50-55HRC • 0-60°adjustableanglebylockingthehexscrewonbottom • Precision ground ideal for drilling, , grinding and setup applications Precision Adjustable AngleBlock 6 PieceAdjustable P 9 P • Range:3/8"to2-1/4" machinetools • Usedinlayout,gaging,andinspectionworkforsetuponvarious • Suppliedwithwoodcase • Range:1/2"to1-1/2"in1/8"heightincrements • Guaranteedtosizeinheightandparallelism:0.0002" Thickness: ±0.0008" Width: ±0.0004" Size Tolerance: Parallelism: ±0.0003" • Matchedinpair • 2holesineachparallel • Hardenedandground • Madeofhighgradealloysteel Precision ThinSteel

0 1-13/16x1-13/16x4" 1-3/16x1-13/16x4" 0-60° 0-60° Size 71255G 71250G MeasuringRange Item No. air W

avy P avy

Item No. 70070G

Item No. 71240G

arallel Set

arallel sets arallels

738 1/8x1-3/8x6" 1/8x1-1/4x6" 71318G 1/8x1-1/8x6" 1/8x1x6" 71317G 1/8x7/8x6" 71316G 1/8x3/4x6" 71315G 1/8x5/8x6" 71314G 1/8x1/2x6" 71313G 71312G 1/2x1-3/4x6" 71311G 1/2x1-1/4x6" 71308G 3/16x1-3/4x6" 71306G 3/16x1-1/2x6" 71304G 3/16x1-1/4x6" 3/16x1x6" 71303G 71302G 71301G Dimensions Item No. 739 1x2x12" 1x2x9" 71339G 3/4x1-1/2x9" 71338G 1/2x1-1/2x9" 1/2x1x9" 71337G 1x2x6" 71336G 71335G 3/4x1-1/2x6" 71334G 1/2x1-1/2x6" 1/2x1x6" 71333G 71332G 1/8x1-5/8x6" 71331G 1/8x1-1/2x6" 71320G 71319G

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 29 Size Size Size 9x12x3" 12x18x3" 18x24x3" 24x36x4" 36x48x6" 12x18x3" 18x24x3" 24x36x4" 9x12x3" 12x18x3" 18x24x3" 24x36x4" 36x48x6" 48x72x6" 71120G

Item No.

Plates ace No. Item 70601G 70602G 70603G 70604G 70605G No. Item 70702G 70703G 70704G No. Item 70501G 70502G 70503G 70504G 70505G 70506G

Grade A 2- Ledge A Grade Grade B, No Ledge No Ledge A Grade k Set 17 Piece Angle Bloc Set includes: ¼°. ½°, 1°, 2°, 3°, 4°, 5°, 10°, 15°, 25°,30°, 35°, 40°, 45° and 2 riser blocks Get quick setups for grinding various angles from 1/4 to 45 °.Just load on and rest the work piece at any angle you choose Eliminates time wasted dressing an angle in a grinding wheel… then dressing it flat again later! Hardened steel and supplied in a fitted case f Sur Granite Federal plates meet or exceed • Granite surface GGG-P-463C Specification steel • Harder than or bur • Does not nick for years • Retains accuracy or corrode • Does not rust

s Hole 11 No Hole s 23 Holes 23 Holes 23 Holes One Hole Description 1-2-3 & 2-4-6 BLOCKS & GRANITE TOOLS & GRANITE BLOCKS & 2-4-6 1-2-3 23 Holes, tin coated

70126G 70234G Item No. Item No.

S SET 70125G 70050G 70128G 1x2x3" 70129G 1x2x3" 1x2x3" 70131G 1x2x3" 70246G 1x2x3" 2x4x6" 23 Holes w/ case 70123G 1x2x3" 70130G 25x50x75mm Item No. Size

k Precision 1-2-3 Bloc Ultra Matched pair of 1-2-3" blocks; five 3/8"-16 stainless steel socket head cap screws,hex key ; • Matched pairs & sold as pair • Hardened and precision ground on all 6 sides of each block • Hardened and precision ground on all 6 sides of each perinch • Accuracy with Squareness on all sides within .0001" and 18 • 23 hole consists of 5 tapped holes 3/8"-16 for clamping untapped holes drilled K 2-3-4 BLOC Features: pair Supplied in matched and case hardened on all 6 sides Precision ground 55-60 Heat treated to HRC for precision layout & setup work Extremly versatile Parallel: 0.0001" to 0.0002" k Bloc 2-4-6 And 1-2-3 Precision 0.0003"/1" • Squareness 30 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • • • • 2PC SOLIDANGLEPLATE SET • Thin AngleSets Fitted case Accuracy: +/-.0001"/1" Block Size:3“longx1/4"thick Made oftoolsteel-hardened,stabilizedandground Simple, quickangleset-ups Set includes:1°,2°,3°,4°,5°,10°,15°,20°,25°,30° 10 PieceAngleBlock S et • • • PRECISON FRAMESPIRITLEVEL • • Two 1/4"holesareprovidedformounting Hardened andgroundsteel Precision groundonworkingsurface For toolingsetups,productionandinspection Precision groundangles Supplied infittedcase Four 11/32" holes

This levelcomeswith2veesandflatbases Fitted woodencase Sensitivity: .0002"/per10" 710 12×12" Size 73100G Item No.

lpc-30°x60°90°(2x3-3/8x5/16)" 15G "lpc-45°x90°(3x3x5/16) 71150G No. Item

6°,7°,8°,9°,10° 1/2°,1°,2°,3°,4°,5° Includes 6-10° 1/2-5° 71130G 71125G Range Item No.

10G Tin-coated Material 71105G 71100G Item No.

ANGLE BLOCKS&LEVELS

Including

Steel

Magnetic Level measuring oradjustingwork The levelcanbesuckedattheverticalplaneofworkpiecefor • Castingthoroughlyseasoned,machinedandhandseasoned • Groundandgraduatedmainvialof10secondaccuracy requiresextremelevelingaccuracy settingupmachineryandotherworkthat • Foraccuratelycheckingtheworkofmachinistsandtoolmakers, • Graduation:0.0002"per10" Master PrecisionLevels • Displayalwaysreadupright,nomatterwhichwaythelevelisturned • 360degreemeasurerange Digital Level • Castingthoroughlyseasoned,machinedandhandseasoned • Groundandgraduatedmainvialof10secondaccuracy upmachineryandotherworkthatrequiresextremelevelingaccuracy • Foraccuratelycheckingtheworkofmachinistsandtoolmakers,setting • Zeropositionisadjustable Adjustable PrecisionLevel

718 8 0.0005"/10" 0.0002"/10" 0.0001"/10" 8" 8“ Graduation 8" 73158G 73128G Size 73118G Item No. o Sz Sensitivity Size Item No. 716 6"x6" 73106G 31G 4x90°(0~360°) 73210G ItemNo. o Size 73012G 73008G Item No.

Range 12" 8" 0.0002"/1 NEW

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 31

4“ 7" 7" 4" 4" 6-1/2" 6-1/2" 3/4" 3/4" 3/4" 3/4" 150kg,

No. Item Dia. of Holding Bar 27012L Length 27022L 27032L 1-1/4" No. Item Dia. of Holding Bar 27001L Length 27002L 27003L 27004L 1-1/4" 1-1/4"

Electronic Audible Edge Finder Unit will sound at the same time when the lamp lights up. Accuracy: 0.0005 Electronic Edge Finder • Quickly locates work edges: save time positioning • Highly visible lights; Accuracy: 0.0005" 100kg, 20-100HRB, 20-70HRC

6.7" 5.3" 60kg, 20-67 80-898 143 lbs 20-88HRA,

18-3/8x9-3/8x24-4/5" HARDNESS TESTER & EDGE FINDERS EDGE & TESTER HARDNESS HLD HB HRC HRB HV HS

300-700 60-190 200-540 40-173 13-95 0.55-8.06 N

Alloys 200-700 45-315 Weight force Test Dimensions Depth of throat Steel Tool 300-840 Brass Bronze Material Cast Iron 180-560 30-159 Max. Height of test piece Spheroid Iron 400-660 131-387 Gray Cast Iron 360-660 93-334 Stainless Steel 300-800 85-655 20-62 40-100 85-802 Alloy Item No. Measuring Range 90020H force Test 20-90HA

No. Item 90040H range Measuring

90010H Steel/Cast Steel 300-900 80-650 20-68 40-100 80-977 32-100 No. Item Copper Wrought

ester HR-150 A Tester Hardness kwell Roc • 5-100,HV 80-999 AND HS 5-99.9 • 5-100,HV 80-999 AND HS • Accuracy: Mean uncertainty ± 0.8 (HRC=58) • Automatic power off after 5 minutes • Large LCD display for easy reading ble Electronic Hardness Tester Porta HS values can be measured • HLD, HB, HRC, HRB,HV AND HB 30-680,HRC 17-68,HRB13 • Hardness Range: HLD 180-960 Can be used to determine the Rockwell hardness of hard alloys, determine the Rockwell hardness Can be used to unquenched steels, quenched and Dial Shore "A" Durometer Shore A durometer provides a fast and easy method of testing hardness on rubbers 32 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Illuminatingsystem:12V/10Willuminator 95mmreversiblestageplate paired1X&2Xor1X&3Xoptional, • Objectives:Paired2X&4Xstandard, pairedWF15Xor20Xoptional • Eyepieces:PairedWF10Xstandard, • Changeablepupildistance:50-75mm • 45°inclinedeyetubes Stereo Microscopes-ModelNo.ST330 • Theeyepieceandanglecanbemeasuredin6minutes • Theeyepieceprotractorisgraduatedin1o • Large dovetail assures 2 axis squareness in relation to the stage surface lineartraverseinXandYaxis • Crossedrollerbearingsandkeywaystageconstructionensuresatrue 67mmworkingdistance 90obrokencrosshairreticule 30Xlens(15Xeyepieceand2Xobjectivelens) 50x50mm(2"2")stagefeedingrange(with1"gaugeblock) • Features: Toolmakers Microscope Package Contents Accessories Applicable forModelST330

800 S302X0) Withbothtopandbottonlights ST330(20X40X) 85030S 809 S301X0) With ST330(10X30X) ModelNo. 85029S Item No. 86800s ItemNo. 50S ReticuleWF10Xeyepieces Tungsten bulbfortopandbottomlights 85104S 85103S 85102S 85101S ItemNo. 86182S 86181S 86180S 86179S 86178S 86177S 86176S 86175S 86174S 86173S 86172S 86171S ItemNo.

MICROSCOPES

WF15X eyepieces(pair) WF10X eyepieces(pair)

Description Reticule settingscrew Reflected illuminator Steel testingblocks Cross-hair reticule Micrometer head

Grounding wire Manual User’s Description Power cord

Spare fuse Spare bulb both Objective Eyepiece

top Features

and

bottom

lights

andtransmitted(bottom)illuminator • optional,70mmreversiblestageplate paired1X&2Xor4X • Objectives:Paired1X&3Xstandard, • Eyepieces:PairedWF10Xstandard,pairedWF20Xoptional • Changeablepupildistance:50-75mm • Head:45°inclinedeyetubes Stereo Microscope-ModelNo.600 • Illuminatingsystem:12V/10Whalogenbulb paired0.5Xoptional • Objectives:Paired1Xstandard, • Eyepieces:PairedWF10Xstandard,pairedWF10XorWF20Xoptional • Changeablepupildistance:50-75mm • 20Xpower Microscope -ModelNo.ST720 L ong WorkingDistance Stereo Illuminating system:20Wincident(top)

85124S 85123S 85122S 85121S 85058S Item No.

85112S 85111S 85110S 85036S 85035S Item No.

Replacement bulbforupperlight Replacement BulbforST631 Stereo microscope(10X30X) Stereo microscope(10X20X) Reticule WF10Xeyepieces Reticule WF10Xeyepieces ST720 Stereomicroscope WF15X eyepieces(pair) WF10X eyepieces(pair) WF20X eyepieces(pair)

Description Description

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 33

amp Description 86030S Item No.

Item No. 86131S 86132S 86133S WF10X eyepieces (pair) 86134S WF15X eyepieces (pair) 86135S WF20X eyepieces (pair) 86610S WF25X eyepieces (pair) 86136S Reticule WF10 eyepieces 86137S 86138S Fluorescent ring light fluorescent lamp Transmitted 86139S Incident halogen lamp 86140S auxiliary objective 0.4X 86141S auxiliary objective 0.5X 86142S 0.75X auxiliary objective auxiliary objective 1.5X 2X auxiliary objective

MICROSCOPES 86610S Item No. els SZ131, SZ150-131 Accessories for Models Lamps of 110V or 220V,7W are available field of vision To provide even and comfortable illumination for the AnnularL Fluorescent • Same features as the model No. SZ131 except as the model No. SZ131 • Same features stand with universal option. universal stand available as • Clamp type order number suffix C is added to the In this case,a optional WF15X, WF20X & WF25X • Eyepieces: Paired 30-4.4mm dia • Field of view: • Total magnification: 3.25X-225X del oom - Mo Z 6.5-45 Microscope Stereo No. SZ150-131

Description

0.5X auxiliary objective 2.0X auxiliary objective WF10X eyepieces (pair) WF20X eyepieces (pair) WF25X eyepieces (pair) 0.75X auxiliary objective Reticule WF10 eyepieces 10X-40X zoom Microscope 86010S Item No.

86020S 86151S No. Item 86152S 86153S 86154S 86155S 86156S 86157S

• No illuminator order • Photo tube optional, to be speci fied when placing • TV camera optional • Field of view: 20-1.25mm dia • Total magnification: 5X-200X • Zoom objective: 1X-4X • Changeable pupil distance: 50-75mm • Eyepieces: Paired WF10 standard,paired WF 25X optional • Auxiliary objectives: 0.5X, 0.75X,2X optional • Work distance: 97-30 mm m - Model Stereo Microscope 10X-40X Zoo No. SZ310 • Total magnification: 3.25X-225X • Illuminating system: Adjustable illuminator • Illuminating system: Adjustable and fluorescent of halogen lamp(incident) lamp (transmitted) • Square vertical post • Field of view:Æ 30-4.4mm • Zoom objective: 0.65-4.5X • Zoom objective: pupil distance: 50 - 75mm • Changeable optional WF15X WF20X or WF25 • Eyepieces: Paired 1.5X, 2X optional 0.4X, 0.5X, 0.75X. • Auxiliary objectives: 95mm • Work distance: del oom - Mo Z 6.5-45 Microscope Stereo No.SZ131 • 7:1 zoom ratio MACHINE TOOL ACCESSORIES

V-BLOCKS 35 ANGLE PLATES 36 37-38 CENTERS 38-39 R8 & SETS 39 5C COLLETS 40 ER COLLETS & SETS 41 ADAPTERS & HOLDERS 42 ADAPTERS & ARBORS 43 FIXTURES 44 OTHER ACCESSOTIES 45-46 47 PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 35

13 28 45

/SWITCH

V-BLOCKS

Item No. 90004B 90006B A×B×C 90008B 6" x 5" x 4-1/2" 90009B 8"x6"x5" 10"x8"x6" W.T.(lbs) 12"x9"x8" 8 No. Item 81130B H×W×L 3.75×2.75×4" 1.9" W1 0.7" W2 (OPEN END) D ANGLE PLATES UNIVERSAL SLOTTE • Convenient clamping slots for mounting and are widely used for , layout and inspection • Made of high tensile cast iron properly seasoned against distortion • Open-End style accurately machine square and parallel on all faces CLAK & V-BLOC PRECISION MP SET ULTRA square parallel within 0002" • Guaranteed ground to RC 58-60 • Hardened & • 90° Vee blocks case bolts and clamps in wooden • Supplied with matched pair • Supplied in K W V-BLOC MAGNETIC • Precision ground finished working surfaces • Ideal for scribing, grinding,measuring and machining round or Regular shape items • On/Off switch • Two-centered 90° Vees • Power Pull: 250 lbs" Item No. Length 81030B 81035B width 2-3/8'' 4-1/8'' Height 2-3/8" Diameter Min. 4-1/8'' Max. Capacity 2" 3-1/16'' 9/32'' 13/64" 2-9/16'' 1-3/16''

7" 3.90"

Capacity 1-1/4x1-1/4x1-5/8" 1-5/8x1-3/4x2-3/4" 2-1/8x3-1/2x4-7/8"

4"× 2"×6" S & CLAMPS SET

1"

1-1/2" 2-1/8"

s

S AND CLAMPS SET Item No. OAL Capacity Height Thickness 81018B No. Item 81010B 81012B Capacity Dimension (WxHxL) 88010B 88012B 10" 12" 5" 6" 6-5/8" 8' 5" 88003B 88004B 88005B 3" 88006B 4" 88007B 5" 88008B 1-3/4" 6" 2-1/4" 7" 2-1/2" 8" 2-3/8" 3-1/8" 2-5/8" 3-1/2" 3-1/8" 1-5/16" 4-1/2" 3-1/2" 1-5/8" 4-1/2" 5-1/2" 2" 2-1/2" 3" 4" Item No. size ( L×W×H ) 81020B 2.50×2.75×2.00 round 2" square 1-7/16" Item No. Dimension(Height×width×depth) 81100B Max Hold Dia • 90° Vee blocks • Precision ground flat, square and parallel to 0.0005" • Switch On/Off • Power Pull: 50 lbs • Supplied in matched pair K SET V-BLOC ALUMINUM CAST MAGNETIC • Holds cylindrical workpieces for grinding parallel and square with all surfaces within 0.0003" • Case is hardened and ground • Clamps are included • Supplied in matched pair K -USE V-BLOC MULTI • Stepped groove construction • 90° V groove accuracy are central, • 90° V groove accuracy are central, parallel and square with all surfaces within 0.0003" • Case is hardened and ground • Clamps are included. K V-BLOC • Machined square and parallel to meet stamdard specifications and parallel to meet • Machined square k V Bloc Steel matched pair • Supplied in seasoned against distortion quality casting,properly • Made of high 36 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Furnishedwith(13)l/4"-20tappedholes • Squareandparallelwithin0.0002". • Solid,onepieceangleplateismadefromhardenedsteel STEEL ANGLEPLATE workpiecetotheangleplate" • 24tappedholesallowforfasteningtofixturesandclamping • Squareandparallelwithin0.0002" • Precisiongroundfinishing allowsforusewithsmallerworkpieces • Aconvenientstepof1-1/4"downfromthetopanda1/2"seat • Manufacturedfromasinglepieceofhardenedtoolsteel STEPPED ANGLEPLATE • Includes1clampand3bolts" • Featuresgroundveesforconvenientholdingofsmallroundparts • Tapped16holes:l/4"-20 • HardenedtoRC58-62 • Groundflat,squareandparallelwithin0.0002" • Solid1piecesteelconstruction • Walldimension:6"x4"x1" COMPOUND ANGLEPLATE 13B ' 4' ' (614'2 12 (16)1/4''-20 1'' 4'' 6'' WtIbs Tapped Holes Thickness Wall 71330B Height Length No. Item 10B 4×4×4" 71300B Dimension Item No. 15B ×××" 6 10 4×4×4×1-1/4" 4×3×3×1" 71351B Wt(lbs) 71350B Dimensions No. Item

ANGLE PLATES

Threadoftappedholes

NEW 5/16"-18

NEW

• Accuratelymachinedandgroundsquareparallelonoutsideends • Clampingslotsarewidelyusedformachining,layoutandinspection • Madeofhightensilecastironproperlyseasonedagainstdistortion • Twofinishes,precision-groundandmachined. • Alsowidelyusedasverticalreference. • Versatilemeansofholdingworkforlayout,machiningandinspection. • Amplethicknessandribbedconstruction. ANGLE PLATES (WithoutSlot) UNIVERSAL SLOTTED ANGLE PLATES (WEBBED) A 04B 4' 4' 8' 330 150 74 18'' 12'' 24'' 9'' 16'' 24'' 12'' 20'' 16'' 90043B 90042B Wt(lbs) 90041B Dimensions ItemNo. • Madeofhighgradeclosegrainedcastiron,stressrelievedagainstdistortion. clampingversatility • Machinedonoutsidefacesandwithcoredslotsarrangedformaximum GIANT SLOTTED ANGLEPLATES • Parallelwithin0.00025"per6" • Squarewithin0.0005"per6" • Precisiongroundfinishing • Theopeningprovidesaconvenienthandgripforhandling • Allface,endsandedgesarefinishedsquareparallel • Widelyusedforfixturecomponents • Non-slotted UNIVERSAL RIGHTANGLEIRON o ABC W.T.(lbs) A×B×C ItemNo. 01B 0x"6 38 27 17 10"x8"x6" 9"x7"x6" 11 8"x6"x5" 14 90018B 90017B 7 7"x5-l/2"x4-l/2" 90016B 6"x5"x4-l/2" 5 6 90015B 4-l/2"x3-l/2"x3" 90014B 3-l/2"x3"x2-l/2" 90013B 3"x2-l/2"x2" 90012B 90011B 06B 4 1" 2 241 91 139 12" 76 35 10" 16" 12" 12'' 12" 8'' 9" 24" 42 43 10'' 16" 39 6'' 8" 10'' 22 15 12'' 90062B 8" 10'' 13 90061B 6" 8'' 6" 6'' 90060B 8'' 7" 6'' 90059B 5-1/2" 10 90058B 5-1/2" 5'' 5'' 5" 90057B 5'' 4'' 90056B 4-1/2" 4" 90055B 4" 4'' Wt(lbs) 90054B 90053B 3-3/4" 90052B Dimensions 90051B ItemNo. 03B 2x2x2 100 32 65 16 12"x12"x12" 12 10"x10"x10" 6 8"x8"x8" 90038B 3 6"x6"x6" 90037B 1 5"x5"x5" 90036B 4"x4"x4" 90035B 3"x3"x3" 90034B 2"x2"x2" 90033B 90032B 90031B SquareSize Item No.

C B B C B A

W.T.(lbs)

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 37

1" 1- 3/4"

VISES

No. Item Jaw Width 75032V Jaw Depth Jaw opening 3" 1 3/8" 4" Item No. Jaw Width 75070V Jaw Depth Jaw Opening 2-3/8" 1- 1/4" 3 -3/8" Item No. Jaw Width 75030V Depth Jaw 75029V Jaw Opening 2" 3" 1- 3/8" 4" Precision Toolmakers’ Vise • Detachable replacement jaws • Has ground “V" way • Clamping slot and 3/8" hole in base ine Vise S Precision precision ground tool steel • Hardened & movement 360 degree • Horizontal swivel movement 90 degree • Vertical swivel table for clamping on the mill • Base has slots Toolmakers’ Screwless Vise and squareness • Guaranteed tolerance within .0002" of parallelism,flatness • Made of high carbon steel hardened and tempered to ensure stability and accuracy 4" 5" 2"

Vise Mac hine ock Item No. Jaw Width 75009V Jaw Depth 75010V Jaw Opening 4" 6" 1 1/4" 1 3/4" 4-1/8" 5-1/2" Item No. Jaw Width 75064V Depth Jaw 75065V Jaw Opening 75066V 4" 5" 6" 1- 3/8" 1- 3/4" 3 1/8" 4" • Adjustable wear gibes • Independent cross feed and traverse • Hardened and ground top jaw • Used for end mills or drill presses • Parallelism and squareness: 0.01"/4" tools • Widely used on milling, planning and drilling machines in making some kinds of slots, holes and faces • Parallelism and squareness: 0.01"/4" • Parallelism • Main attachments to precision millings grinders CNC machines to precision millings • Main attachments suitable for the finishing particularly Cross Slide Vise H/D Swivel Base Milling Vise u-L Acc 75056V 6" 1-11/16" 5-3/4" 4" Item No. Jaw Width Jaw Depth Jaw Opening 75053V Base Travel Travel Vise 75054V 3" 4" 1-1/8" 1-7/16" 2-3/4" 3-3/4" 2-5/8" 3-1/8" 2-3/4" 3-1/8" 38 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Satinchromedials • Dualpositiveactionlocks • Extradeepcoolantchannel • Geardriveimmersedinoil • 10secondvernierreading • Lowprofile Horizontal/V ertical Rotary T Multi-Function Vises • Handleadjuststoanyangle • Replaceablesteeljaws • Guidinggroovecontrolstheparallelmovementandrigidityofmoveablejaw • Fourslotsforeasyclampingtotables Drill PressVise • Overalllength:17-1/2" • Widelyusedonmachiningcenterandotherprecisiontools • Parallelism&squareness:0.01"/4" • Thehardnessofworkingsurface:HRC50-60 CNC MachineVise 04M 7 12" 10" 8* 171 111 71 80041M Table Size 80040M 80039M Wt(lbs) ItemNo. 34 5-1/2" 1-3/4" 6" JawOpening JawDepth 75021V JawWidth ItemNo. 58V " -/6 5-3/8" 3-1/2" 1-1/16" 7/8" 6" 5" 4" 75086V JawOpening 75085V Depth Jaw 75084V Jaw Width ItemNo. 54V " 3/4" 6" 4" 3" 75035V Jaw Opening 75040V JawDepth 75045V JawWidth ItemNo.

VISES &CENTERS

1" " 4-1/8" 1" 1"

ables 4" 6" 3"

ty LiveCenters Duty Precision Heavy • Heavy-dutycastingandprecisiongroundwiththreeT-slots. • Range0-90°(45°eachside) Tilting Duty Heavy T Half-notched Centers • Accuracyheldwithin0.0005"T.I.R. • Minimumdegreeofdeflectionassured • Forheavycapacity,longerlifeandaccurateperformance Arbor Press • Steelpinions • 4positionsteelanvil • Precisionmade • Heavy-dutyframe 75447M 75446M 75445M 75444M 75443M MTNo. 75442M 75441M ItemNo. egt MaxWork Diameter 1 PressHeight Press 75201M ItemNo. 50M 2 75202M 50M 3 75203M 51M 15x10" 10x7" 7x5" 75515M Size 75510M 75507M ItemNo. 59M 12500 8000 6400 4500 6 2700 5 1400 4 75396M 3 75395M 2 75394M 1 75393M 75392M MaxSpeed(rpm) 75391M MaxLoad(N) MTNo. ItemNo.

o 13" Ton o 18" Ton o 23" Ton 7 6 5 4 3 2 1

ables egt Wt(lbs) Height 7-1/4" 3-1/2"

5" 1200 1200 1800 2000 600 800 12" 12" 8" 121 49 15

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 39 Item No. Size 80201M 80202M 3/32" 80203M 1/8" 80204M 5/32" 80205M 3/16" 80206M 7/32" 80207M 1/4" 80208M 9/32" 80209M 5/16" 80210M 11/32" 80211M 3/4" 80212M 13/32" 80213M 7/16" 80214M 15/32" 1/2" 80305M 80306M 7/32" 80307M 1/4" 80308M 9/32" 80309M 5/16" 80310M 11/32" 80311M 3/8" 80312M 13/32" 80313M 7/16" 80314M 15/32" 80315M 1/2" 80316M 17/32" 80317M 9/16" 80318M 19/32" 5/8" Item No. Size 80301M 80302M 3/32" 80303M 1/8" 80304M 5/32" 3/16" Item No. Range No. of pieces 80030M 1/8-3/4“by 16ths 80031M 1/8-7/8“by 16ths 80032M 1/8-3/4“by 32ths 80033M 11 1/16-3/4“by 32ths 80034M 13 1/8-7/8“by 32ths 21 23 25 Sets Item No. Pilot hole Type 80100M 1/16" Steel 80118M 80119M 9/16" 80120M 19/32" 80121M 80122M 5/8" 21/32" 80123M 11/16" 80124M 23/32" 80125M 80126M 3/4" 25/32" 80127M 13/16" 80128M 27/32" 7/8" Item No. 80101M Size 80102M 1/32" 80103M 1/16" 80104M 3/32" 80105M 80106M 1/8" 5/32" 80107M 3/16" 80108M 7/32" 80109M 80110M 1/4" 9/32" 80111M 5/16" 80112M 11/32" 80113M 80114M 3/8" 13/32" 80115M 7/16" 80116M 15/32" 80117M 1/2" 17/32" R8 Square Collets R8 Hex Collets R8 Round Collets machines, with spindle taper hole is R8 Applicable to all sorts of milling ergency Collet ergency R8 Em hole are soft to permit Face and pilot your requirement machining to R8 COLLETS & SETS & COLLETS R8 and CENTERS Item No. 75402M MT No. 75403M 75404M 2 75405M 3 75406M 4 5 6 50 Extended Type 800 200 300 1500 2000 3200 6300 Tipped Tipped Tipped Tipped Tipped Tipped Tipped Steel Steel Steel Steel Steel Steel Steel 800 5000 4200 3200 1000 5000

Item No. 75431M MT No. 75432M 75433M 75434M 1 Material 75435M 2 75436M 3 75437M 4 75451M 5 75452M 6 75453M 7 75454M 1 75455M 2 75456M 3 75457M 4 Carbide 5 Carbide 6 Carbide 7 Carbide Carbide Carbide Carbide 75415M 5 2600 Item No. No. MT 75412M Max Load (N) Max Speed (rpm) 75413M 75414M 2 3 4 5000 4300 3200 Item No. MT No. 75422M Load (N) Max 75423M Max Speed (rpm) 75424M 2 75425M 3 4 5 5000 4200 3200 1200 Powerful Duty Medium Duty Item No. MT No. Load (N) Max Max Speed (rpm) lti Purpose Live Centers Multi • Bearing steel and carbide tipped • With 60 degree included angle Steel Dead Centers um DutyMedi typeLive Centers - Conventional 75382M 75383M 2 75384M 3 75385M 4 75386M 5 1500 6 2000 3200 6300 9800 75381M 1 900 40 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS 5C Roundollet 5C Hexollet 5C Squareollet Applicable toallsortsoflathes,withspindletaperholeis5C,suchasautomaticCNClathesetc. 01M 19/64" 9/32" 80418M 17/64" 1/4" 80417M 80416M 15/64" 80415M 7/32" 80414M 13/64" 80413M 3/16" 80412M 11/64" 80411M 5/32" 80410M 9/64" 1/8" 80409M 80408M 7/64" 80407M 3/32" 80406M 5/64" 80405M 1/16" 80404M 3/64" 80403M 1/32" 80402M Size 80401M No. Item 02M 3/4" 23/32" 80522M 11/16" 80521M 21/32" 5/8" 80520M 80519M 19/32" 80518M 9/16" 80517M 17/32" 1/2" 80516M 80515M 15/32" 80514M 7/16" 80513M 13/32" 3/8" 80512M 80511M 11/32" 80510M 5/16" 80509M 9/32" 1/4" 80508M 80507M 7/32" 80506M 3/16" 80505M 5/32" 1/8" 80504M 80503M 3/32" 80502M Size 80501M No. Item 02M 7/8" 27/32" 80626M 13/16" 80625M 25/32" 3/4" 80624M 80623M 23/32" 80622M 11/16" 80621M 21/32" 5/8" 80620M 80619M 19/32" 80618M 9/16" 80617M 17/32" 1/2" 80616M 80615M 15/32" 80614M 7/16" 80613M 13/32" 3/8" 80612M 80611M 11/32" 80610M 5/16" 80609M 9/32" 1/4" 80608M 80607M 7/32" 80606M 3/16" 80605M 5/32" 1/8" 80604M 80603M 3/32" 80602M Size 80601M No. Item 03M 37/64" 9/16" 80436M 35/64" 80435M 17/32" 80434M 33/64" 1/2" 80433M 80432M 31/64" 80431M 15/32" 80430M 29/64" 80429M 7/16" 80428M 27/64" 80427M 13/32" 80426M 25/64" 3/8" 80425M 80424M 23/64" 80423M 11/32" 80422M 21/64" 80421M 5/16" 80420M 80419M o Size No. Item 5C COLLETS 05M 55/64" 27/32" 80454M 53/64" 80453M 13/16" 80452M 51/64" 80451M 25/32" 80450M 49/64" 3/4" 80449M 80448M 47/64" 80447M 23/32" 80446M 45/64" 80445M 11/16" 80444M 43/64" 80443M 21/32" 80442M 41/64" 5/8" 80441M 80440M 39/64" 80439M 19/32" 80438M 80437M o Size No. Item 07M 1-1/8" 1-7/64" 80471M 1-3/32" 80470M 1-5/64" 80469M 1-1/16" 80468M 1-3/64" 80467M 1-1/32" 80466M 1-1/64" 1" 80465M 80464M 63/64" 80463M 31/32" 80462M 61/64" 80461M 15/16" 80460M 59/64" 80459M 29/32" 80458M 57/64" 7/8" 80457M 80456M 80455M o Size No. Item Face and pilot hole are soft to permit machining to your requirement 5C Emergencyollet 5C lutchollets 01M " 1-3/16" 1-1/8" 1" 6" 1-3/16" 6" 1-1/8" 1" 80715M 6" 80714M 5" 1-3/16" 80713M 5" 1-1/8" 1" 80712M 5" 80711M 4" 1-3/16" 80710M 4" 1-1/8" 1" 80709M 4" 80708M 3" 1-3/16" 80707M 3" 1-1/8" 1" 80706M 3" 80705M 2" 80704M 2" 80703M 2" 80702M HeadThickness 80701M Size ItemNo. Steel 1/16" Type 80400M Hole Pilot ItemNo. Sets /4 57 31 1/8-1"by1/64" 8 11 16 80020M 1/8-1-1/16"by1/32" 80019M 1/8-1-1/16"by1/16" 1/8-3/4"by1/16" 80018M 1/8-1"by1/8" 80017M 80016M o Rne No.ofpieces Range Item No. PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 41 M-KM M-M M-UM M-A

M-A M-UM M-KM M-M R8 R8 R8 1-1/4" Shank 3/4"x4" 3/4"x6" ISO - 40

Type ER16 ER32 ER40 collets per set 11 10 collets per set 15 collets per set 1/32, 1/16, 3/32, 1/8, 3/16, & 3/4" 1/2, 9/16, 5/8, 11/16 & 3/8" 7/32, 1/4, 5/16, 11/32 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2,

81322M 3/4,13/16, 7/8, 15/16 & 1" 9/16, 5/8, 11/16,

Item No. 81301M 81302M 81303M 81311M 81312M 81321M Item No. 81381M Type 81382M 81383M Size A 81384M 81385M ER11 81386M ER16 81387M ER20 M 81388M ER11 81389M ER16 81390M ER20 81391M UM ER25 81392M ER32 ER25 81393M 81394M ER40 81395M KM ER50 ER32 ER25 ER40 ER50 81484M 81485M 81486M 81487M M 81488M ER11 81489M ER16 81490M ER20 UM ER25 81491M 81492M ER32 ER25 81493M 81494M ER40 81495M KM ER50 ER32 ER25 ER40 ER50 Item No. 81481M Type 81482M 81483M Size A ER11 ER16 ER20 ER COLLETS & SETS & COLLETS ER CLACOLLET MPING NUTS COLLET • 4 Models for choice • UM/KM are interchangeable er & Set older & Chu ck h ollets ER C Wrench collets, Collets holder & • Including: ER box with wooden box or plastic • Completed and drilling application • For all milling Item No. Size Head Thickness

81052M 81053M 81054M 81055M ER-40 81056M 81057M 1/2" 21/32" 17/32" 81058M 81059M 5/8" 81060M 81061M 3/4" 25/32" 7/8" 15/16" 31/32" 1" 81033M 81034M 81035M 81036M 81037M 3/16" 81038M 7/32" 81039M ER-32 81040M 1/4" 5/16" 81041M 13/32" 11/32" 81042M 81043M 3/8" 81044M 7/16" 81045M 81046M 1/2" 17/32" 81047M 9/16" 81048M 5/8" 21/32" 81049M 11/16" 81050M 81051M 3/4" 1/8" 1/4" 5/16" 11/32" 81032M 1/8"

76010M 3/16", 3/8", 1/2", 5/8",3/4", 7/8", 1", 1-1/4" Item No. Includes Sets 76024M 76025M 7/16" 76026M 1/2" 76027M 9/16" 76028M 5/8" 76029M 11/16" 76030M 3/4" 76031M 7/8" 76032M 1" 1-1/8" Item No. Size 76021M 76022M 3/16" 76023M 1/4" 3/8" Item No. Size Head Thickness 81001M 1/32" ollets ER C elastic steel • Made of special treatment and precise • Exellent heat R8 End Mill Adapters 81027M 81028M 81029M 81030M 81031M 7/16" 1/2" 17/32" 9/16" 5/8" 81022M 81023M 81024M ER-25 81025M 81026M 11/32" 1/4" 5/16" 3/8" 13/32" 81017M 81018M 81019M 81020M 81021M 1/16" 3/32" 1/8" 3/16" 7/32" 81013M ER-20 81014M 81015M 81016M 1/4" 11/32" 3/8" 1/2" 81010M 81011M 81012M 3/32" 1/8" 7/32" 81005M ER-16 81006M 81007M 7/32" 81008M 81009M 1/4" 5/16" 11/32" 3/8" 81002M 81003M 81004M 1/16" 1/8" 3/16" 42 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Acceptssingleanddoubleendmills.(singlemillonlyforsizesover7/8") • Hardenedandprecisionground • Formillingmachineshaving30-40standardtaperspindles NMTB TAPER ENDMILLAdapter Hardened and ground throughtout toassure maximum concentricity R8 ShellEndMillAdapter 75M 0 7/8 3/4 5/8 1/2 3/8 50 1-1/2 77055M 1-1/4 77054M 1 77053M 77052M 7/8 3/4 77051M 5/8 1/2 77049M 3/8 40 77048M 3/16 77047M 1 77046M 77045M 7/8 77044M 3/4 77043M 5/8 77042M 1/2 77041M 3/8 77038M 5/16 3/16 77037M 77036M 77035M 30 77034M 77033M BoreDia. 77032M 77031M Taper Item No. 75M 2 1-1/2 1-1/4 1 77059M 77058M 77057M 77056M 64M 1-1/2" 1-1/4" 1" 76046M 76045M 7/8" 76044M 3/4" 76043M 1/2" 76042M 76041M Size ItemNo.

END MILLADAPTERS&HOLDERS

NMTB 40TAPER SHANKELLENDMILLARBORS MORSE TAPER ENDMILLAAPTERS • 30-40-50Nationalstandardtaperspindles • Completelyhardenedandground • • HardenedandGround Specify tangedorthreadedendfordrawbar 74M 2 1-1/2 1-1/4 1 7/8 3/4 5/8 1/2 40 77248M 77247M 2 77246M 77245M 1-1/2 77244M 1-1/4 1 77243M 77242M 7/8 3/4 77241M 5/8 1/2 77238M 30 77237M 77236M 77235M 77234M 77233M BoreDia. 77232M Taper 77231M Item No. 74M 1-1/2" 1-1/4" 1" 3/4" 7/8" 5/8" 1/2" 77348M 3/8" MT4 77347M 77346M 1" 77345M 7/8" 77344M 3/4" 77343M 77342M 1/2" 77341M 5/8" 3/8" 3/16" 77337M MT3 77336M 3/4" 77335M 5/8" 77334M 1/2" 77333M 3/8" 77332M 77331M 3/16" 1/4" 77326M 77325M MT2 77324M 77323M BoreDia. 77322M 77321M Taper ItemNo. 2 1-1/2 1-1/4 1 7/8 3/4 5/8 1/2 50 77258M 77257M 77256M 77255M 77254M 77253M 77252M 77251M

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 43 TYPE TYPE BAR DRAW TANG

76221M JT2 Item No. Jacobs Taper 76222M 76223M 76224M 76225M JT3 76226M JT33 76227M JT6 76228M JT2 JT3 JT33 JT6 Item No. Shank Taper Jacobs 76201M 76202M 1/2" 76203M 1/2" 76204M 5/8" 76205M 0 JT 1/2" 76105M 6 JT 1/2" 33 JT 50 2 JT 33 JT 5 aper Shank Drill Chuck Arbors Item No. Size Taper 76211M Jacobs Taper 76212M 76213M 1 MT 76214M 2 MT 76215M 2 MT 76216M 3 MT 76217M 3 MT 6 JT 76218M 4 MT 6 JT 76219M 33 JT 4 MT 5 MT 3 JT 5 MT 6 JT 4 JT 33 JT 3 JT 4 JT • Drawbar End: #30-1/2" -13 #40-5/8"-11 • More Sizes On Call TO JACOBS DRILL ARBORS NMTB TAPER Morse T k Arbors Chu c ank Drill ht Sh Straig Two types for choice: Draw Bar Type & Tang Type ADAPTERS & ARBORS ADAPTERS aper aper Adapters Item No. 76051M MT No. 76052M 76053M 76054M 1 2 3 4 aper Adapters aper 76071M 1" 2" 76093M 76094M 76095M 76101M 40 76102M 40 76103M 40 76104M 50 3 76105M 50 4 50 5 50 1 50 2 3 4 5 Item No. 7:24 No. 76081M 76082M MT No. 76083M 76084M 30 76091M 30 76092M 30 30 1 40 2 40 3 4 1 2 Item No. Shank Taper Jacobs 76060M 76061M R8 76062M R8 76063M R8 76064M R8 76065M 0 JT R8 76066M 1 JT R8 2 JT R8 3 JT 4 JT 33 JT 6 JT Item No. Arbor Dia. Length 76072M 1-1/4" 2" 7:24 to Morse T 7:24 s T Drill Chuck Arbors R8 To Jacob hine Arbors R8 Stub Milling Mac T Morse R8 to 44 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS • Basetofacesquareness0.008" • Spindlecenterlineparallelism0.008" • Cylindercenterbore(per1concentricity)0.008" • Dividingspindleconcentricity:0.004" • Individualspacingdividingaccuracy:3’ • Threadofspindlenose:2-1/4" • Centerheight:3-15/16" • Specification: • Withindexingspecificationsof2,3,4,6,8,12and24indexes • Forthepurposesofindexinganddrawingsetlineetc. • Applicabletocompletewithsuchmachinetoolsasmiller,grinderanddrilletc. • Headissoftforeasymachiningblackoxideallover • Bodyishardenedandprecisionground • Canbeusedinplaceoffacefixturesforquicklymountingdismounting 5C FixtureMont 5C ollet H/VIndexFixture 5C Hex&Squareollet Block Chuc squarenessandparallelism • Madeoftoolsteelhardenedandgroundto.0005"flatness, drillingat60°90°or120° forparallel,squareorhexesshapesaswellcross-hole • Forfastset-upsonmillingmachines,lathes,surfacegrinders&drillpresses • OverallDimensions:1-3/4"x1-3/4"x3-1/4" • Capacityforstandard5Ccollets:1/16"1-1/16" • 5pc-Square,Hex,QuickActingRings&Levercolletclosercamoperated 57M " 1" 1" 3" 1" 6" 3" 5" 2" 4" 75370M 1" 4" 3" 75369M 3" 75368M 2" 3" 75367M 1" 3" 75366M 2 75365M 2" 75364M 2" 75363M 75362M Head Length 75361M Dia. ItemNo.

COLLET FIXTURES 75535M ItemNo. 75530M ItemNo.

s

• Weight:18lbs • VerticalSize:6.1"x4.72"4.13" • HorizontalSize:6.1"x4.03"7.16" • Centerheight:2.36" • Specification: Collect Horizontal Duty Heavy & Vertical 5C • Weight:12lbs • HorizontalSize:4-1/4"x5"4-1/2" • Centerheight:2-1/2" 5C Horizontal & VerticalCollet Vise • Weight:10.6lbs • VerticalSize:5"x3-3/4"4-1/8" • HorizontalSize:5"x4"3-3/4" • Centerheight:2-1/2" 5C Horizontal &VerticalCollet Fixture • Verticalcenterlineofspindletobase:0.0008" • Basesize:4"x7-7/8" • Height:4-1/2" 5C Verticalollet Vise 75525M ItemNo. 75550M ItemNo. 75545M ItemNo. 75540M ItemNo.

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 45 Accuracy

4’

9 9 7 12 12

77011M 1/2" 3/8"-16 Item No. Shank Dia. 75001M No. of Pieces 75005M 75002M 75000M 3/8" 75003M 1/2" 5/8" 3/4" 1" Item No. Size T-Slot 77015M 77020M Stud Size 5/8" 7/16" 1/2"-13 3/8"-16 Item No. Head Size 75610M Shank 2" Bar R8, 7/8"-20 1/2" 9 pc set Boring Bar Set Bar Tippe d Boring arbide C-6 C PC Deluxe Cla52- mping Kit • Each set contains: • *6t-slot nuts • *6 flange nuts *4 coupling nuts *6 step blocks • *6 serrated end clamps * 24 studs • 4 each: 3", 4", 5", 6", 7", 8",lg. 1 holder • Boring bars have ground alloy steel shank – 50RC have ground alloy steel shank • Boring bars in plastic case • All sets comes steel • For processing 5C Spin Jigs • One of the important accessory units for such machine tools as drill, miller, and grinder etc. • And with assistance of this unit, machine tools will be able to accomplish operation as index machining of various angular parts and set line drawing of parts, etc. ank & Boring Bar Set Boring Head, Sh • 3pc/Set Includes: • Boring Head, • C-6 Carbide Tipped Boring Bar Set • R8 Boring Shank Item No. Height of Center 75520M Individual Spacing Dividing 2-3/4" OTHER ACCESSOTIES OTHER

ype ype

Item No. Swing Capacity 75310M 75320M 75330M Up to 12" 75340M 75350M 10-15" 13-18" 14-20" 17-48" 75240M 14-20" Item No. Swing Capacity 75210M 75220M 75230M Up to 12" 10-15" 13-18"

Item No. Dia. 75006M Height 75007M 2" Hole Size 3" Min Graduation 2-3/8" 3-1/8" 1/2" 3/4" 0.001" 0.0005" Item No. Taper 75601M 75602M Thread R8" R8" 7/8"-20 1-1/2"-18 Boring Head Shank • Practical design, excellent performance holder is used • Maximum rigidity is assured even when boring bar in an offset position Boring Head • No. 4 - Boring, Heavy Duty; No. 7 - Universal parting blade; • No. 4 - Boring, Heavy Duty; No. 7 - Universal parting Tool Post. • No.10 - Knurling, Facing & Turning and Wedge Type et Wedge T Quick Change Tool Post Set • 6pc/Set Includes: & Facing; • Holders: No. 1 - Turning & Facing; No. 2 - Boring, Turning • No. 4 - Boring, Heavy Duty; No. 7 - Universal parting blade; Heavy Duty; No. 7 - Universal • No. 4 - Boring, Piston Type Tool Post. Facing & Turning and • No.10 - Knurling, iston Piston T Set Tool Post k Change Quic • 6pc/Set Includes: 2 - Boring, Turning & Facing; 1 - Turning & Facing; No. • Holders: No. 46 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS ae 6x"1" 54lbs 16"x8"x16" Wt. 22 gage Size 80050M CuttingCapacity ItemNo. • Hubdiameter:1" • Speedsupalloperations • Springloadedpinactivatesquillspeed • Quickflickofwristretractsindexplatepinquill Quill FeedHanle • 115V/60Hz/1Phasepowersupply • FeedRange:0-10"/Min • RapidTraverseSpeed:40"/Min • Variablespeed • Reversiblewith1.5-secondtimedelay • Completewithallhardware Power Feeds • Standardclampfortablemountoperation • Longthroatmakesunithighlyversatile • Includes6rolls:2turning,1eachofburring,wiring,crimpingandogeebead • Performburring,edging,elbowingflanging,flatteningandturning • Counterheight:1-1/4" • counterBase2-1/8x1-3/4" • Withresetknob5digital Rotary Mach ine Machine Counter 52M Z- Y 75120M X- 75115M Y Torque 75110M X- 75105M Type 75101M ItemNo. 75555M ItemNo. 75565M ItemNo.

- - xs 150LBS Axis xs 150LBS Axis 135LBS Axis xs 150LBS Axis 135LBS Axis

OTHER ACCESSOTIES

• Material:HighfireresistantABS • Basiccolor:Black Auto-Darkening WeldingHelmet • Clipsonquilleasilyforrapiddepthsetting • 1/2"-20Thread • 0.02"fineadjustment • Quickactionclip Quill Stop 8 pcsSetIncludes:1/16"-5/16by32ths Drive PinPunchSet • Blackoxidefinish • Allpunches0.0025undersizetofacilitateuse • Heattreatedandtemperedforlongerlife • For accurate tranferring of drilled or topped holes Transfer PunchSets 73M 1/2"by64ths 28 77133M 3/32"-1/2" by64thsplus7/32" 77128M Item No. 75560M ItemNo.

77108M ItemNo. ItemNo. 80060M

Includes

No ofPieces

33

PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 47 36X 40X 60X 36X 40X 60X 80X 40X 60X 80X 40X 60X 40X 60X 80X 240X 320X 100X 120X 150X 180X 240X 120X 150X 180X 240X 320X 120X 180X 240X 320X 100X 120X 180X 320X 120X 150X 180X

Item No. 20040A Grit 20060A 20080A 40X 20100A 60X 20120A 80X 20150A 100X 20180A 120X 20240A 150X 20320A 180X 20400A 240X 320X 400X Abrasives

28240A 28320A 29036A 29040A 29060A 29080A 29100A 29120A 6 X 48 29150A 29180A 29240A 80X Item No. 25036A 25040A Size 25060A 25080A 25100A Grit 25120A 25150A 1 X 42 25180A 25240A 25320A 100X 26040A 26060A 26080A 26100A 26120A 26180A 2 X 48 26240A 26320A 27040A 100X 27060A 27080A 27100A 27120A 2-1/2 X 60 27180A 27320A 80X 28040A 28060A 28080A 28100A 28120A 28150A 4 X 36 28180A 100X h Sheets xide Clot inum O Alum • 50pcs per Pack • Size: 9 x 11" h belts Aluminum oxide clot 10pcs per Pack

40X 60X 80X 40X 60X 80X 40X 60X 80X 100X 150X 180X 220X 240X 320X 100X 150X 180X 220X 240X 320X 120X 180X 220X 240X 320X 400X 100X YD 120X YD 120X YD 150X

10180A 10220A 10240A 10280A 180X 10320A 220X 10360A 240X 10400A 280X 10500A 320X 10600A 360X 400X 500X 600X Item No. 10060A 10080A 10100A Grit 10120A 60X 80X 100X 120X

23100A 23150A 23180A 23220A 23240A 23320A 22100A 22120A 22150A 1 1/2 X 50 22180A 22220A 22240A 22320A 23040A 23060A 23080A 23120A 2 X 50 21120A 21180A 21220A 21240A 21320A 21400A 22040A 22060A 22080A Item No. 21040A 21060A Size 21080A 21100A Grit 21150A 1 X 50 • Made of high grade, resin-bonded, J-wt. cotton cloth material. • Made of high grade, resin-bonded, J-wt. cotton cloth • Flexibility allows for contour work. • Aluminum oxide grain. h rolls Aluminum oxide clot finis hing paper bide car Dry silicon & Wet • 50pcs per Pack • Size: 9 x 11" 48 CUTTING TOOLS MACHINE TOOL ACCESSORIESPRECISION MEASURING TOOLS Double End Single End End Millscanbeorderedseperately End millsets • Fractionalsizes • Straightshank • Highspeedsteel HSS JobberLengthDrill29Pc.Sets • • • • 3"flutelength" • 6"overalllength • Sizeofshankis1/2"diameter HSS Silver &DeminDrill8Pcset-1/2" Shank HSS Silver &DemingDrill1/2"Shank o Rne Drillpoint 118 Degree 9/16"-1"x16ths Range 81100D ItemNo. 6" overalllength" High SpeedSteel "1/2" straightshank ere Tin coated Black 119 degree 118 degree Finish 29 Point Drill 29 No.ofDrills 1/16-1/2"x64ths 81145D 1/16-1/2"x64ths Range 81140D Item No. ts Tin-Coated Tin-Coated Tin-Coated 1/4-3/4" x8ths 3/16-3/4" x16ths none 3/16-3/4"x16ths none Tin-Coated 2&4-Flutes10Pcs. 4-Flutes10Pcs. none 3/16-3/4"x16ths 2-Flutes10Pcs. 81308D 1/4-3/4" x8ths 3/16-3/4"x16ths none 81307D 2&4-Flutes20Pcs. 3/16-3/4"x16ths 81306D 2&4-Flutes10Pcs. 4-Flutes10Pcs. 81305D 3/16-3/4"x16ths 2-Flutes10Pcs. 81304D 81303D 2&4-Flutes20Pcs. Description 81302D 81301D Item No. ts Tin-Coated Tin-Coated Tin-Coated 1/4-3/4"x8ths 3/16-3/4" x16ths none 3/16-3/4" x16ths none Tin-Coated 2&4-Flutes10Pcs. 4-Flutes 10Pcs. none x16ths 3/16-3/4" 2-Flutes10Pcs. 81316D x8ths 1/4-3/4" 3/16-3/4"x16ths none 81312D 2&4-Flutes 20Pcs. 3/16-3/4"x16ths 81311D 2&4-Flutes 10Pcs. 4-Flutes 10Pcs. 81310D 3/16-3/4"x16ths 2-Flutes 10Pcs. 81315D 81314D 2&4-Flutes 20Pcs. Description 81309D 81313D Item No. 823 29/32" 7/8" 81213D 27/32" 81212D 13/16" 81211D 25/32" 81210D 3/4" 81209D 23/32" 81208D 11/16" 81207D 21/32" 81206D 5/8" 81205D 19/32" 81204D 9/16" 81203D 17/32" 81202D 81201D Size Item No.

DRILLS &SETS,CountersinkstoolSetsAND EndmillSets 825 1-1/2" 1-7/16" 81225D 1-3/8" 81224D 1-5/16" 81223D 1-1/4" 81222D 1-3/16" 81221D 1-1/8" 81220D 1-1/16" 81219D 1-1/32" 1" 81218D 81217D 31/32" 81216D 15/16" 81215D 81214D Size Item No. Range Range Finish Finish lain type combinedrills & type Plain jobber lengthdrill29pcset A-Z lettersizedrills, #1-60 wiresizedrills, Including: • Setsarefurnishedinmetalindexcases • Surfacetreated 115 pcsHSSJobberLengthDrillSets Including: 1/4",3/8",1/2",3/4"&1" • Singleflutewillcountersinkholesmuchsmallerthanmulti-flutetools. comparativelyhighspeeds. • Recommendedforportableandmachineworkwhenoperatedat HSS SinglefluteContersink5PC.et SETS drillingormachiningbetweencenters. • Used for producing center holes in workpieces which require precision • HighSpeedSteel&Ground Including: 1/4",3/8",1/2",3/4"&1" • Excelsinaluminum,plasticsandothernonmetallics. wheelincross-hole. • Throughholedesignthatiseasytoresharpenusingasmallgrinding • Camrelievedfortatallychatterfreecuts. tool sets 5 ere Tin coated Black 119 degree 118 degree Finish 81120D 81115D DrillPoint Item No. 810 No.1-5drills 80130D Including Item No. PC 18D 14 76" 2" 1-7/8" 1-1/4" 7/64" 5/64" 3/64" 1/4" 3/16" 1/8" 3 2 OAL 1 81182D Dia. Point 81181D BodyDia. 81180D DrillNo. ItemNo. 18D 0 " /" 3-3/4" 3-5/8" 3/8" 3-1/2" 3-1/4" 3" 11/32" 5/16“ 1/4" 2-1/2" 1" 2-1/8" 7/32" 7/8" 3/4" 3/16" 5/8" 1/8" 10 1/2" 9 7/16" 8 81189D 5/16" 7 81188D 6 81187D 5 81186D 4 81185D 81184D 81183D 16D 90° 82° 60° 81160D Degree 81155D 81150D Item No. 17D 90° 82° 60° 81175D Degree 81170D 81165D Item No. zero-

f l u

te co te

u ntersin

k & & d e bu rring rring

s PRECISION MEASURING TOOLSMACHINE TOOL ACCESSORIES CUTTING TOOLS 49 No. Item style Tool Material 83119D 83120D 83121D AL-8 83122D AL-8 AR-10 83123D AR-10 83124D C2 AL-10 83125D C6 C2 AL-10 83126D C6 AR-12 83127D C2 AR-12 83128D C6 AL-12 C2 AL-12 C6 C2 C6 No. Item style Tool Material 83411D 83412D 83413D E-10 83414D E-10 E-12 C2 E-12 C6 C2 C6 HSS HSS Bits Tool No. Item style Tool Material 83401D 83402D 83403D E-4 83404D E-4 83405D E-5 83406D E-5 C2 83407D E-6 C6 83408D E-6 C2 83409D E-7 C6 83410D E-7 C2 E-8 C6 E-8 C2 C6 C2 C6 No. Item style Tool Material 83301D 83302D 83303D D-4 83304D D-4 83305D D-5 83306D D-5 C2 83307D D-6 C6 83308D D-6 C2 83309D D-7 C6 83310D D-7 C2 83311D D-8 C6 83312D D-8 C2 83313D D-10 C6 83314D D-10 C2 D-12 C6 C2 D-12 C6 C2 C6 No. Item style Tool Material 83101D 83102D 83103D AR-4 83104D AR-4 83105D AL-4 C2 83106D AL-4 C6 83107D AR-5 83108D AR-5 C2 83109D C6 AL-5 C2 83110D AL-5 C6 83111D AR-6 83112D AR-6 C2 83113D C6 AL-6 C2 83114D AL-6 C6 83115D AR-7 83116D AR-7 C2 83117D C6 AL-7 C2 83118D AL-7 C6 AR-8 AR-8 C2 C6 C2 C6 83203D 83204D 83205D C-5 83206D C-5 83207D C-6 83208D C-6 C2 83209D C-7 C6 83210D C-7 C2 83211D C-8 C6 83212D C-8 C2 83213D C-10 C6 83214D C-10 C2 C-12 C6 C2 C-12 C6 C2 C6 No. Item style Tool Material 83201D 83202D C-4 C-4 C2 C6 For turning, plunging, facing, boring and chamfering. For threading, V-grooving, chamfering, turning, facing and boring. For general maching applications, turning, facing boring where a lead facing boring where a lead applications, turning, For general maching used. angle may be For general-propose grooving, turning, facing and chamfering. HSS Carbide-tipped tool bits - Style D HSS Carbide-tipped tool bits - Style E its - tyle bits -S d tool ide-tippe Carb B HSS Carbide-tipped tool bits - StyleC HSS 2-1/2" 2-1/2"

x x

83025D 83026D AR-12 83027D AR-12 83028D AL-12 C2 AL-12 C6 C2 C6 No. Item style Tool Material 83019D 83020D 83021D AL-8 83022D AL-8 AR-10 83023D AR-10 83024D C2 AL-10 C6 C2 AL-10 C6 C2 C6 No. Item 82011D 82012D Size 82013D 1/8 x 2-1/2" 82014D 3/16 82015D 1/4 x 2-1/2" 82017D 5/16 x 3" 3/8 x 4" 1/2 HSS M42

3-1/2" 2-1/2" 2-1/2"

x x x

No. Item 82201D 82202D Size 3/16 x 3-1/2" 82203D 82204D 1/4 x 4" 3/8 x 5" 1/2 x 6" 82007D 82008D 82009D 82010D 1/2 x 4" 5/8 x 4-1/2" 82011D 3/4 x 5" 7/8 x 6" 1 x 7" 82005D 82006D 3/8 x 3" 7/16 82003D 82004D 1/4 x 2-1/2" 5/16 No. Item 82001D 82002D Size 1/8 x 2-1/2" 3/16 82101D 82102D 1/4 x 3/8 x 3" 82103D 1/4 x 1/2 x 4" 82104D 1/4 x 3/4 x 5" 82105D 3/8 x 3/4 x 5" 82106D 3/8 x 1-1/4 x 6" 82107D 1/2 x 3/4 x 5" 82108D 1/2 x 1-1/2 x 7" 5/8 x 1-1/2 x 7" No. Item Size No. Item 82301D 3/32 x 1/2 x 4-1/2" 82302D Size 82303D 3/32 x 5/8 x 5" 1/8 x 7/8 x 6" 83010D 83011D 83012D AR-6 83013D AL-6 83014D AL-6 C6 83015D AR-7 83016D AR-7 C2 83017D C6 AL-7 C2 83018D AL-7 C6 AR-8 AR-8 C2 C6 C2 C6 No. Item style Tool Material 83001D 83002D 83003D AR-4 83004D AR-4 83005D AL-4 C2 83006D AL-4 C6 83007D AR-5 83008D AR-5 C2 83009D C6 AL-5 C2 AL-5 C6 AR-6 C2 C6 C2 HSS Carbide-tipped tool bits - Style A chamfering. and boring facing turning, applications, maching general For ff Blades - HSS Cut-o Round Tool Bits - HSS ular Tool Bits - HSS Rectang HSS makes a superior finishing tool. makes a superior steel which will work - Superior types of high speed • M42 Cobalt for heavy cuts in hard materials. high heat is present. Used better where ool Bits Tool Square ground tool bits show Steel - A fine general purpose • M2 High Speed and tool steels. This result on mild steel, alloys exceptional