CARBIDE TIPPED TOOL BIT SETS Please Specify Grade When Ordering C-2 Cast Iron for Nonferrous Materials Or C-5/C-6 Steel for Ferrous Materials

Total Page：16

File Type：pdf, Size：1020Kb

CARBIDE TIPPED TOOL BIT SETS Please Specify Grade When Ordering C-2 Cast Iron for Nonferrous Materials Or C-5/C-6 Steel for Ferrous Materials

Federal Tool Premium Import t CARBIDE TIPPED TOOL BITS Please specify grade when ordering C-2 Cast Iron for nonferrous materials or C-5/C-6 Steel for ferrous materials. ER AND EL STYLES TRC AND TRE STYLES OFFSET THREADING ROUND SHANK BORING Square Overall Tool No. Tool No. Price Round Overall Price Shank Length Right Hand Left Hand Each Shank Length Tool No. Each 1/4 2 ER4 EL4 6.95 .312 1-1/2 TRC5 5.80 5/16 2-1/4 ER5 –– 7.05 .312 1-1/2 TRE5 5.80 3/8 2-1/2 ER6 EL6 7.05 1/2 3-1/2 ER8 EL8 7.90 TSA TSC AND TSE STYLES • TSA for boring to a square shoulder in 90º boring bars . • TSCTSCTSC for boring to a square shoulder in 30º boring bars or internal chamfering. • TSETSETSE for boring to a square shoulder in 45º boring bars or boring with a 15º lead angle in 30° boring bar. SQUARE SHANK BORING SQUARE SHANK BORING Square Overall Tool Price Square Overall Tool Price Shank Length No. Each Shank Length No. Each 5/16 1-1/2 TSA-5 6.70 5/8 3 TSC-10 10.80 3/8 1-3/4 TSA-6 6.70 3/4 3-1/2 TSC-12 17.50 1/2 2-1/2 TSA-8 7.40 5/16 1-1/2 TSE-5 6.70 5/16 1-1/2 TSC-5 6.70 3/8 1-3/4 TSE-6 6.70 3/8 1-3/4 TSC-6 6.70 1/2 2-1/2 TSE-8 7.40 1/2 2-1/2 TSC-8 7.40 5/8 3 TSE-10 10.80 tCARBIDE TIPPED TOOL BIT SETS Please specify grade when ordering C-2 Cast Iron for nonferrous materials or C-5/C-6 Steel for ferrous materials. 38 Piece Set Each set includes: Set Price Size No. Each 8 Pieces Each: AR style (Right Hand) AL style (Left Hand) 1/4 CTBS-14 129.00 4 Pieces Each: BR style (Right Hand) BL style (Left Hand) 5/16 CTBS-516 139.00 4 Pieces Each: C style 3/8 CTBS-38 139.00 4 Pieces Each: D style 1/2 CTBS-12 159.00 6 Pieces Each: E style tSTRAIGHT AND BENT tGRINDING TAIL LATHE DOGS CARRIERS LATHE DOGS CARRIERS Straight Bent Size Price Tool Price Tool Tool Size No. Each No. No. Each 1/2 THLD50 THBD50 2.75 1/4 THG25 4.30 3/4 THLD75 THBD75 3.99 3/8 THG375 4.50 1 THLD100 THBD100 5.95 1/2 THG500 4.60 1-1/4 THLD125 THBD125 6.90 5/8 THG625 4.95 1-1/2 THLD150 THBD150 7.85 3/4 THG750 5.50 1-3/4 THLD175 THBD175 8.30 1 THG1000 5.90 2 THLD200 THBD200 9.67 1-1/4 THG1250 7.75 2-1/2 THLD250 THBD250 17.50 1-1/2 THG1500 8.85 3 THLD300 THBD300 22.50 1-3/4 THG1750 10.50 4 THLD400 THBD400 33.85 2 THG2000 11.90 5 THLD500 THBD500 43.30 2-1/2 THG2500 13.40 6 THLD600 THBD600 49.90 3 THG3000 14.85 Missouri Carbide 190 EMail: [email protected] 13965 Lawrence 2143 - Mt. Vernon, MO 65712 Phone: (800) 430-3101 Fax: (417) 471-1037.

Copy Link

Recommended publications

2018 Line Card
H.D. Chasen Company Inc. H. D. CHASEN TOOL GROUP INVENTORY SOLUTIONS LOGISTICS www.steelerectortools.com “OTHERS TALK... WE STOCK.” 2018 LINE CARD 40 Lake Street|Somerville, MA|02143 P|617.666.9090 www.hdchasen.com INDEX OF PRODUCTS INDEX OF PRODUCTS A B Abrasive Back Stand Idler Units Abrasives - Abrasive Mounted Points Back Support Systems Abrasives - Bristle Discs - Roloc / Cup Wheel Bags - Tool Bags Abrasives - Cartridge Rolls Balldriver Hex Screwdrivers Abrasives - Cloth Sanding Rolls Balldriver Insert Bits Abrasives - Coated Abrasives Balldriver L-Wrench / Sets Abrasives - Combiwheels Abrasive / Scotchbrite Balldriver Power Bits Abrasives - Diamond Lapping Film Discs Balldriver T-Handle - Sets & Singles Abrasives - Diamond Lapping Film Sheets Bandsaws - Electric Abrasives - Diamond Products Bars - Boring Abrasives - Disc Pad Holder Bars - Breaker 3/8,1/2,3/4 Drive Abrasives - Discs PSA Cloth / Paper, Resin Fibre Bars - Claw Bar 5' Abrasives - Discs Quick Change Bars - Connecting Bars Abrasives - Discs Resin Fibre Bars - Diamond Point 5' Abrasives - Discs Roloc A/O, Regalite Polycut Bars - Grizzly Bar Abrasives - Discs Velcro S/C, Gold Bars - Jimmy Bars Abrasives - Flap Wheels Bars - Offset Pinch Bars - 14" - 48" Abrasives - Lapping Film Discs Bars - Pinch Bars 13-1/2" - 48" Abrasives - Lapping Film Sheets Bars - Pinch Point Crow Bar / 3' - 5-1/2' Abrasives - Microfinishing Film Discs Bars - Pry Abrasives - Microfinishing Film Sheets Bars - San Angelo Digging 5' - 7' Abrasives - Mounted Points / Cotton Abrasive Bars - Telegraph Lining
[Show full text]
Atla Fibre Co Article Fabricating Cutting Thermoset
SpecialFocus Fabricating and Cutting Thermoset Materials Plastics Fabrication by Mark Mush s the machining of plastic materials cannot be mastered in one diameter run at 3,000-3,600 rpm will give good results cutting dry with a setting, the same can be said, probably more so, of thermosets good exhaust system. Material feed should be as fast possible without forcing A(FR4/G-10, G-11, phenolics). Glass epoxies and phenolics have the saw. Idling creates friction and heat, which cause excessive dulling and traditionally been unfairly characterized as materials that many machine burning. A flood of water or water-soluble coolants on the work and wheel shops or fabricators avoid due to their dust, wear and tear on equipment can be used when necessary to prevent overheating. Abrasive wheel cutting and tools and the overall toughness of the material. To the contrary, with under water is also recommended. a little bit of practice and patience, most fabricators can master the art of thermosets. What follows is a guide to get you started in that process. Turning Mastering these suggestions will not immediately make you an expert Paper and fabric grades machinist of these materials but should significantly improve your skills. Ordinary high-speed tool steel can be used in finishing operations for all Paper and fabric grades thermoset grades. However, carbide-tipped tools may prove more economi- cal and will hold sizes more accurately from piece to piece. About .010" stock Thermoset materials machine well with proper techniques. As a rule, they should be left for finishing. Thermosets can be turned at 400 surface feet per machine more readily than metals with standard machine tools such as minute with high-speed tools and about twice as fast with carbides.
[Show full text]
Carbide Tipped Annular Cutters Are Engineered for Cutting 3” and 4” Thick Steel, Pipe, and Square Channel
Innovative Cutting Tool Solutions 2011 Product Catalog Your Productivity Partner Professional Grade Products Champion has been dedicated to servicing professionals with industrial grade products and services since 1897. Our product range includes twist drills, end mills, taps, dies, cutters, power tools, and masonry tools that are engineered for peak performance. Our distribution network serves cutting tool users in all fifty U.S. States, and is expanding internationally. Our commitment to same-day shipping and superior technical support give you, our customer, the Champion Edge. Innovative Cutting Tool Solutions Our CT5 Carbide tipped hole cutter has been completely redesigned. The result is faster hole penetration, and longer tool life. The design enhancements include a new carbide tip pocket for faster chip evacuation, improved carbide tips, stepped pilot drill for smoother penetration, and stiffer spring for positive slug ejection. The new CM95X series of SDS-Plus hammer bits features a “solid-tip” which penetrates rebar-imbedded concrete. These state of the art SDS-Plus bits penetrate the toughest aggregates including Vermont granite. Champion’s iPac system provides professional grade cutting tools in individual and combination packs. The iPac range includes twist drills, taps, and screw extractors. DT22HEX combination drill and taps create a hole and thread in one application. Available in NC/NF, and metric sizes, these industrial quality tools are available from 6-32 machine screw size to 1/2-13. Perfect for industrial, MRO and electrical professions. Champion’s CT9 was designed in conjunction with locksmiths whose work requires the installation of locksets in steel doors. CT9 hole cutters enable quick drilling of 1-1/2” and 2-1/8” holes in steel doors.
[Show full text]
Planing and Profiling
Anpassung der Rückenstärke für Druck noch nicht ausgeführt Planing and profiling Leitz Lexicon Edition 7 Version 2 Explanation of abbreviations A = dimension A LH = left hand rotation ae = cutting thickness (radial) ap = cutting depth (axial) M = metric thread ABM = dimension MBM = minimum order quantity APL = panel raising length MC = multi-purpose steel, coated APT = panel raising depth MD = thickness of knife AL = working length min-1 = revolutions per minute (RPM) AM = number of knives MK = morse taper AS = anti sound (low noise design) m min-1 = metres per minute m s-1 = metres per second b = overhang B = width n = RPM BDD = thickness of shoulder nmax. = maximum permissible RPM BEM = note NAL = position of hub BEZ = description ND = thickness of hub BH = tipping height NH = zero height BO = bore diameter NL = cutting length NLA = pinhole dimensions CNC = Computerized Numerical Control NT = grooving depth d = diameter P = profile D = cutting circle diameter POS = cutter position D0 = zero diameter PT = profile depth DA = outside Diameter PG = profile group DB = diameter of shoulder DFC = Dust Flow Control (optimised chip clearance) QAL = cutting material quality DGL = number of links DIK = thickness R = radius DKN = double keyway RD = right hand twist DP = polycrystalline diamond RH = right hand rotation DRI = rotation RP = radius of cutter FAB = width of rebate S = shank dimension FAT = depth of rebate SB = cutting width FAW = bevel angle SET = set FLD = flange diameter SLB = slotting width fz = tooth feed SLL = slotting length fz eff = effective tooth feed SLT = slotting depth SP = tool steel GEW = thread ST = Cobalt-basis cast alloys, GL = total length e.g.
[Show full text]
Caddo Archeology Journal
CCaddoaddo AArcheologyrcheology JJournalournal Volume 16 Spring 2007 CADDO ARCHEOLOGY JOURNAL P.O. Box 8419 Austin, TX 78712-8419 EDITORIAL BOARD TIMOTHY K. PERTTULA 10101 Woodhaven Dr. Austin, TX 78753 e-mail: [email protected] CHESTER P. W ALKER 5309 DUVAL STREET AUSTIN, TX 78751 e-mail: [email protected] GREGORY VOGEL Center for American Archeology P.O. Box 366 Kampsville, IL 62053 [email protected] T. CLAY SCHULTZ 507 Franklin San Marcos, TX 78666 [email protected] LIASON WITH THE CADDO NATION OF OKLAHOMA ROBERT CAST Tribal Historic Preservation Ofﬁ cer Caddo Nation of Oklahoma P.O. Box 487 Binger, OK 73009 e-mail: [email protected] ISSN 1522-0427 Printed in the United States of America at Morgan Printing in Austin, Texas 2007 2 ◆ Spring 2007 Table of Contents Proposal For A 2007 Caddo Archaeology Summit Meeting . 5 Timothy K. Perttula Byram Ferry (16BO17): A Middle to Late Caddo Period Mound Site in the Red River Floodplain, Northwest Louisiana. 9 Jeffery S. Girard Archaeological Investigations of the Lang Pasture (41AN38) Midden Deposits on private property west of the SH 155 Right-of-Way, Anderson County, Texas . 27 Timothy K. Perttula, Bo Nelson, Mark Walters, and LeeAnna Schniebs Remote Sensing at the Horace Cabe Site (41BW14). 37 Chester P. Walker and Timothy K. Perttula The History of Archaeological Investigations at the Jamestown Mound Site (41SM54), An Archaeological Concervancy Preserve in Smith County, Texas . 45 Timothy K. Perttula Leaning Rock Site (41SM325) Lithics . 57 Harry J. Shafer The Organization of Novaculite Tool Production: Quarry-Workshop Debitage Comparisons . 71 Mary Beth Trubitt CADDO ARCHEOLOGY JOURNAL ◆ 3 PROPOSAL FOR A 2007 CADDO ARCHAEOLOGY SUMMIT MEETING Timothy K.
[Show full text]
Dimar Dado Set Instructions
Carbide Tipped Dado Sets - General Purpose Carbide Tipped Dado Sets - General Purpose Tool number Description Dia. Teeth Kerf Bore Tool number Description Dia. Teeth Kerf Bore 8-24 DADO Complete Set 8" 24 13/16" 5/8" 6-18 DADO CL Complete Set 6" 18 13/16" 5/8" 8-1/16 Dado Chipper 8" 2 1/16" 5/8" 6-1/16 Dado Chipper 6” 2 1/16" 5/8" 8-1/8 Dado Chipper 8" 2 1/8" 5/8" 6-1/8 Dado Chipper 6" 2 1/8" 5/8" 8-1/4 Dado Chipper 8" 2 1/4" 5/8" 6-1/4 Dado Chipper 6" 2 1/4" 5/8" 8-24R Saw Blade R 8" 24 1/8" 5/8" 6-18R Saw Blade R 6" 18 1/8" 5/8" 8-24L Saw Blade L 8" 24 1/8" 5/8" 6-18L Saw Blade L 6” 18 1/8" 5/8" Negative Hook Tooth Design Suitable for Wood & Melamine Chip Limiter - will prevent kickback Tool number Description Dia. Teeth Kerf Bore Tool number Description Dia.Teeth Kerf Bore www.dimarcanada.com 8-24 DADO-1 Complete Set 8" 24 13/16" 1" 8-24 DADO-CL Complete Set 8" 24 13/16" 5/8" 8-1/16-1 Dado Chipper 8" 2 1/16" 1" 8-1/16 Dado Chipper 8" 2 1/16" 5/8" 8-1/8-1 Dado Chipper 8" 2 1/8" 1" 8-1/8 Dado Chipper 8" 2 1/8" 5/8" 8-1/4-1 Dado Chipper 8" 2 1/4" 1" 8-1/4 Dado Chipper 8" 2 1/4" 5/8" 8-24R-1 Saw Blade R 8" 24 1/8" 1" 8-24RC Saw Blade R 8" 24 1/8" 5/8" 8-24L-1 Saw Blade L 8" 24 1/8" 1” 8-24LC Saw Blade L 8" 24 1/8" 5/8” DADO SET Negative Hook Tooth Design Suitable for Wood & Melamine Chip Limiter - will prevent kickback INSTRUCTIONS Carbide Tipped Dado Sets - For Melamine Tool number Description Dia.
[Show full text]
Antares, Inc. Fact Sheets Surface Engraving © 2011 - Antares, Inc
Antares, Inc. Fact Sheets Surface Engraving © 2011 - Antares, Inc. Section One - Burnishing Description Burnishing is a surface marking technique intended for coated metals - usually lacquered brass - where the coating is removed to expose the bare metal. It is a method of rotary engraving on metals that tends to bridge the gap between diamond drag (scratch engraving) and routing. The biggest advantage of burnishing is that it enables the engraver to produce wider line widths than are obtainable with a diamond graver with- out having to cut deeply into the metal. Burnishers can be used with single and multiple line fonts, and are excellent for producing detailed line and logo work on metal. Burnishing offers the ability to create enhanced effects on both lettering and graphics and is relatively simple process. Rotating Tools Non-Rotating Point Variable Tip Sizes Tip Only Cutting with Depth Surface Marking Only Application The most common application is on the brass plates on trophies and plaques. This “trophy brass” is a rela- tively hard material that yields excellent burnishing results. It is available in various gold tones with clear or colored lacquer coatings. When burnishing the gold material, the lacquer is removed exposing the bare metal. The burnished areas can then be oxidized or blackened resulting in a gold plate with contrasting black letters. (See “Color Filling Fact Sheet”). When burnishing the colored materials, the result is a colored plate with contrasting gold letters without the need for further treatment. Burnishing can also be done on materials other than brass. However, much of the success or failure de- pends on the hardness of the material.
[Show full text]
User Encyclopedia
User encyclopedia Leitz Lexicon Edition 7 11. User encyclopedia 11.1 Materials science 11.1.1 Wood as a raw material and basic material 2 11.1.2 Wood materials 6 11.1.3 Plastics 9 11.1.4 Mineral materials 11 11.1.5 Non-ferrous metals 12 11.1.6 Composite materials 13 11.2 Cutting materials 14 11.3 Fundamental cutting principles 11.3.1 Essential geometry elements in a cutting tool 19 11.3.2 Cutting directions and procedures when cutting wood 20 11.3.3 Cutting kinematics 21 11.3.4 Processing quality 22 11.3.5 Tool parameters 25 11.4 Machine tools 11.4.1 Tool types 28 11.4.2 Types of tools 31 11.4.3 Tool clamping systems 40 11.4.4 Tool maintenance 43 11.4.5 Safety 51 11.4.6 Low noise tools 53 11.4.7 Chip and dust extraction 54 11.4.8 Tools as intelligent process components 56 11.5 Wood processing machines 11.5.1 Through feed machines 58 11.5.2 Stand alone machines 59 11.5.3 Machines for manual feed 61 11.5.4 Hand operated electrical tools 62 1 11.1 Materials science 11.1.1 Wood as a raw material and basic material As a renewable material, wood is a raw material which is important because of its strength and low density and because it is found all over the world. As a result, wood is used widely in support structures in timber construction and in non load-bearing areas such as building components, furniture or interior fittings.
[Show full text]
D-Constructed Tool Glossary
UNIVERSITY OF BRITISH COLUMBIA D-CONSTRUCTED TOOL GLOSSARY MATERIALS • TOOLS • PROCESSES A 21 POLAR 23 ADDITIVE MANUFACT. 66 PROFILE SCANNER C R 18 CARTESIAN 59 ROTOMOLDING 43 CNC LATHE 44 CNC MILL S 53 CNC PRESS BRAKE 20 SCARA 54 CNC PUNCH PRESS 38 STEREOLITHOGRAPHY 55 CNC ROLLER APPARATUS (S.L.A.) 45 CNC ROUTER 25 SUBTRACTIVE MANUFACT. 56 CNC TUBE BENDER 37 SELECTIVE LASER MELTING 09 CONCEPTS (S.L.M.) 16 CUTTING TOOLS 58 SINGLE POINT FORMING (S.P.F.) D 67 STRUCTURED-LIGHT 19 DELTA 12 DEGREES OF FREEDOM T 14 TOOL PATH E 49 EDM V 57 VACUUM FORMING F 07 FOREWORDS W 27 FORMATIVE FABRICATION 48 WATER JET CUTTER 35 FUSED DEPOSITION 49 WIRE EDM MODELING (F.D.M.) 13 WORK ENVELOPE H # 31 HYBRIDS 10 2D 11 3D L 68 3D BODY SCAN 36 LAMINATED OBJECT 39 3D INK JET MANUFACTURING (L.O.M.) 12 6-DEGREES OF FREEDOM 63 LIDAR I 60 INJECTION MOLDER 61 INPUT K 15 KINEMATICS M 64 MOTION CAPTURE P 14 PATH 65 PHOTOGRAMMETRY 47 PLASMA CUTTER 03 GLOSSARY 48 WATER JET CUTTER 49 WIRE EDM 05 TABLE OF CONTENT 51 FORMING 07 FOREWORDS 53 CNC PRESS BRAKE 09 TERMS & CONCEPTS 54 CNC PUNCH PRESS 55 CNC ROLLER 10 2D 56 CNC TUBE BENDER 11 3D 57 VACUUM FORMING 12 6-DEGREES OF FREEDOM 58 SINGLE POINT FORMING 13 TOOLSPACE 59 ROTOMOLDING 14 TOOLPATH 60 INJECTION MOLDING 15 KINEMATICS 16 CARTESIAN 61 INPUT 17 G-CODE | CNC 18 CARTESIAN 63 LIDAR 19 DELTA 64 MOTION CAPTURE 20 SCARA 65 PHOTOGRAMMETRY 21 POLAR 66 PROFILE SCANNER 23 ADDITIVE 67 STRUCTURED-LIGHT 25 SUBTRACTIVE 68 3D BODY SCAN 27 FORMING 29 INPUT 71 ACKNOWLEDGMENTS 31 HYBRIDS 33 ADDITIVE MANUFACT.
[Show full text]
Design & Development of Special Purpose Machine for Its Cycle Time
Imperial Journal of Interdisciplinary Research (IJIR) Vol-2, Issue-9, 2016 ISSN: 2454-1362, http://www.onlinejournal.in Design & Development of Special Purpose Machine for its Cycle Time Optimization A. H. Rasal1, Prof. (Dr.) V. R. Naik2 & R. A. Mane3 1M.E. (Mech) P.D.D.student, Textile and Engg. Institute, Ichalkaranji, Kolhapur. 2Head of Mechanical Department, Textile and Engg. Institute, Ichalkaranji, Kolhapur. 3Asst. manager, Paranjape Autocast Pvt, Ltd,,Satara. Abstract - The growth of Indian manufacturing the experience of the shop floor machine tool sector depends largely on its productivity & operators for optimal selection of cutting quality. Productivity depends upon many factors, conditions and tools. Considerable efforts are still one of the major factors being manufacturing in progress on the use of hand book-based efficiency with which the operation /activities are conservative cutting conditions and cutting tool carried out in the organization. Productivity can be selection at the process planning level [8]. improved by reducing the total machining time, Sawing is a metal cutting process which combining the operations etc. In case of mass makes use of cutting tools such as band saw, production where variety of jobs is less and circular saw. These tools are used on conventional quantity to be produced is huge, it is very essential sawing machines i.e. a worker holds the job on the to produce the job at a faster rate. This is not machining table and slides it further in the direction possible by using general purpose machines. The of rotating saw and the cutting process takes place. best way to improve the production rate In this paper, the component is a cylinder head (productivity) along wit quality is by use of special made of aluminium alloy (IS designation 4223).
[Show full text]
AIR TOOLS, Continued Sanders ...414-415 Saw, Cut-Off ...413 Scalers
ABRASIVES ABRASIVES, continued AIR TOOLS, continued Backing Pads ............………330 Grinding Wheels Sanders .........................414-415 Belts Tool & Cutter ..............310-311 Saw, Cut-off ......................... 413 Sanding ............................. 334 Hand Pads ............................ 341 Scalers ................................. 414 Brushes Holder Pads .......................... 341 Signal Bells .......................... 434 Acid ................................... 303 Mounted Points Swivels ................................. 433 BRM, Flex-Hone................. 298 Carbide ......................226-233 Tank Valves .......................... 434 Chip .................................. 303 CBN ................................... 323 Tire Gages .....................431-432 Conflex .............................. 302 Diamond ............................ 323 Tool Oil ................................. 500 High Speed .................226-229 Counter Dusters ................ 303 Tubing, Puvex ....................... 416 Non-Woven ....................... 341 Wrenches ............................. 415 Cup ............................300-301 Vitrified Bond ..............317-318 AIRCRAFT COUNTERBORES ....... 95 End ................................... 302 Non-Woven ....................338-341 AIRCRAFT EXTENSION DRILLS .31-32 Flex-Hone, BRM................. 298 PSA Discs ............................. 331 ALLEGIANCE ® Floor .................................. 303 Quick Change Discs...... 329, 332 Burrs .............................226-233
[Show full text]
TFT Catalog 2009.Pdf
PRECISION MEASURING MEASURING TOOL SETS 1-2 VERNIER CALIPERS 3 TOOLS DIAL CALIPERS 3-4 ELECTRONIC CALIPERS 5-7 CALIPER ACCESSORIES 7 OUTSIDE MICROMETERS 8-11 INSIDE MICROMETERS 12-13 MICROMETER ACCESSORIES 13 INDICATORS 14-17 HEIGHT GAGES 18 DEPTH GAGES 19 BORE GAGES 19 GAGE BLOCKS 20 THERAD GAGES 21 OTHER GAGES 22-23 SQUARES & PROTRACTORS 24 MAGNETIC TOOLS 25-27 PARALLEL SETS 27-28 1-2-3 & 2-4-6 BLOCKS 29 GRANITE TOOLS 29 ANGLE BLOCKS 30 LEVELS 30 HARDNESS TESTER 31 EDGE FINDERS 31 MICROSCOPES 32-33 MEASURING TOOL SETS MAGNETIC BASE & DIAL INDICATOR SET TEST INDICATOR & UNIVERSAL INDICATOR HOLDER SET PRECISION MEASURING TOOLS Item No. No. of Pieces Set Consists of Item No. No. of Pieces Set Consists of 90075C 2 Standard 132lbs magnetic base 90072C 2 0.03"/0.0005" dial test indicator 1"/0.001" dial indicator Universalindicator holder 90070C 2 Magnetic base with fine adjustment 132lbs 1"/0.001" dial indicator MINI MAGNETIC INDICATOR GRANITE STAND & INDICATOR SET HOLDER & TEST INDICATOR SET • Overall height approximately 10" MACHINE TOOL ACCESSORIES • Fine adjustment knuckle on clamp Base Size: 1-3/16" diameter and 1" high • Extreme stable and durable • Granite stand flatness: 0.00005" Item No. No. of Pieces Set Consists of Item No. No. of Pieces Set Consists of 90071C 2 Universal holder with fine adjustment 90050C 2 6x6x2" granite check 0.06"/0.0005" horizontal test indicator 0-1" dial indicator 90055C 2 6x6x2" granite check 0-1" electronic indicator 90051C 1 6x6x2" granite check only ELECTRONIC CALIPER & MICROMETER SET Features: Both units include Large LCD display; Furnished with plastic case DIAL CALIPER WITH T-BAR DEPTH BASE ATTACHMENT CUTTING TOOLS Item No.
[Show full text]