DOCSLIB.ORG

Plastic Very-Very-Thin Fine-Pitch Ball Grid Array Package; 155 Balls, 0.5 Mm Pitch, 7.5 Mm X 7.5 Mm X 0.76 Mm Body 2 Package Outline

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Plastic Very-Very-Thin Fine-Pitch Ball Grid Array Package; 155 Balls, 0.5 Mm Pitch, 7.5 Mm X 7.5 Mm X 0.76 Mm Body 2 Package Outline SOT1456-1 5 5 1 A plastic very-very-thin fine-pitch ball grid array package; 155 G B F W balls, 0.5 mm pitch, 7.5 mm x 7.5 mm x 0.76 mm body 29 October 2018 Package information 1 Package summary Terminal position code B (bottom) Package type descriptive code WFBGA155 Package style descriptive code BGA (ball grid array) Package body material type P (plastic) Mounting method type S (surface mount) Issue date 06-04-2016 Manufacturer package code SOT1456 Table 1. Package summary Parameter Min Nom Max Unit package length 7.4 7.5 7.6 mm package width 7.4 7.5 7.6 mm seated height 0.72 0.76 0.8 mm package height 0.48 0.51 0.54 mm nominal pitch - 0.5 - mm actual quantity of termination - 155 - NXP Semiconductors SOT1456-1 plastic very-very-thin fine-pitch ball grid array package; 155 balls, 0.5 mm pitch, 7.5 mm x 7.5 mm x 0.76 mm body 2 Package outline WFBGA155: plastic very-very-thin profile fine-pitch ball grid array package; 155 balls; SOT1456-1 D B A ball A1 index area A2 E A A1 detail X e1 C Ø v C A B e b y1 C y Ø w C R P N M L K e J H e2 G F E D C B A ball A1 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 index area X 0 10 mm scale Dimensions (mm are the original dimensions) Unit A A1 A2 b D E e e1 e2 v w y y1 max 0.80 0.26 0.54 0.35 7.6 7.6 mm nom 0.76 0.23 0.51 0.32 7.5 7.5 0.5 7.0 7.0 0.15 0.05 0.08 0.1 min 0.72 0.20 0.48 0.29 7.4 7.4 sot1456-1_po Outline References European Issue date version IEC JEDEC JEITA projection 15-09-21 SOT1456-1 - - - 15-09-22 Figure 1. Package outline WFBGA155 (SOT1456-1) SOT1456-1 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved. Package information 29 October 2018 2 / 5 NXP Semiconductors SOT1456-1 plastic very-very-thin fine-pitch ball grid array package; 155 balls, 0.5 mm pitch, 7.5 mm x 7.5 mm x 0.76 mm body 3 Soldering Footprint information for reflow soldering of WFBGA155 package SOT1456-1 Hx ball A1 P P Hy see detail X SL SP occupied area solder resist opening (SR) SR detail X solder land (SL) solder paste deposit (SP) solder land plus solder paste Dimensions in mm recommend stencil thickness: 0.1 mm P SL SP SR Hx Hy 0.50 0.28 0.34 0.38 7.75 7.75 18-10-16 Issue date sot1456-1_fr 18-10-29 Figure 2. Reflow soldering footprint for WFBGA155 (SOT1456-1) SOT1456-1 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved. Package information 29 October 2018 3 / 5 NXP Semiconductors SOT1456-1 plastic very-very-thin fine-pitch ball grid array package; 155 balls, 0.5 mm pitch, 7.5 mm x 7.5 mm x 0.76 mm body 4 Legal information Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. SOT1456-1 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved. Package information 29 October 2018 4 / 5 NXP Semiconductors SOT1456-1 plastic very-very-thin fine-pitch ball grid array package; 155 balls, 0.5 mm pitch, 7.5 mm x 7.5 mm x 0.76 mm body Contents 1 Package summary ...............................................1 2 Package outline ...................................................2 3 Soldering ..............................................................3 4 Legal information ................................................4 © NXP B.V. 2018. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 29 October 2018.
Load more

Recommended publications
  • FC-PBGA, Flip Chip Plastic Ball Grid Array
    TM Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, C-Ware, t he Energy Efficient Solutions logo, mobileGT, PowerQUICC, QorIQ, StarCore and Symphony are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. BeeKit, BeeStack, ColdFire+, CoreNet, Flexis, Kinetis, MXC, Platform in a Package, Processor Expert, QorIQ Qonverge, Qorivva, QUICC Engine, SMARTMOS, TurboLink, VortiQa and Xtrinsic are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © 2011 Freescale Semiconductor, Inc. Table of Contents Slide 1. FC-PBGA Package Configurations 3 2. Printed Circuit Board Design for FC-PBGA 11 3. Surface Mount Assembly 16 4. Component Level Qualification 29 5. Board-Level Reliability 31 6. Thermal Performance 38 Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, C-Ware, the Energy Efficient Solutions logo, mobileGT, PowerQUICC, QorIQ, StarCore and Symphony are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. BeeKit, BeeStack, ColdFire+, CoreNet, Flexis, Kinetis, MXC, Platform in a TM 2 Package, Processor Expert, QorIQ Qonverge, Qorivva, QUICC Engine, SMARTMOS, TurboLink, VortiQa and Xtrinsic are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © 2011 Freescale Semiconductor, Inc. TM FC-PBGA Package Configurations Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, C-Ware, t he Energy Efficient Solutions logo, mobileGT, PowerQUICC, QorIQ, StarCore and Symphony are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. BeeKit, BeeStack, ColdFire+, CoreNet, Flexis, Kinetis, MXC, Platform in a Package, Processor Expert, QorIQ Qonverge, Qorivva, QUICC Engine, SMARTMOS, TurboLink, VortiQa and Xtrinsic are trademarks of Freescale Semiconductor, Inc.
    [Show full text]
  • Manufacturing and Reliability Challenges with QFN
    Manufacturing and Reliability Challenges With QFN Dr. Craig Hillman and Cheryl Tulkoff DfR Solutions SMTA DC Chapter Ashburn, VA February 25, 2009 QFN as a ‘Next Generation’ Technology What is ‘Next Generation’ Technology? Materials or designs currently being used, but not widely adopted (especially among hi-rel manufacturers) Carbon nanotubes are not ‘Next Generation’ Not used in electronic applications Ball grid array is not ‘Next Generation’ Widely adopted © 2004 - 2007 2 Introduction (cont.) Why is knowing about ‘Next Generation’ Technologies important? These are the technologies that you or your supply chain will use to improve your product Cheaper, Faster, Stronger, ‘Environmentally-Friendly’, etc. And sooner then you think! © 2004 - 2007 3 Reliability and Next Gen Technologies One of the most common drivers for failure is inappropriate adoption of new technologies The path from consumer (high volume, short lifetime) to high rel is not always clear Obtaining relevant information can be difficult Information is often segmented Focus on opportunity, not risks Can be especially true for component packaging BGA, flip chip, QFN © 2004 - 2007 4 Component Packaging Most of us have little influence over component packaging Most devices offer only one or two packaging styles Why should you care? Poor understanding of component qualification procedures Who tests what and why? © 2004 - 2007 5 Component Testing Reliability testing performed by component manufacturers is driven by JEDEC JESD22 series (A & B) Focus is
    [Show full text]
  • Land Grid Array (LGA) Package Rework
    Freescale Semiconductor Document Number: AN3241 Application Note Rev. 1.0, 10/2009 Land Grid Array (LGA) Package Rework 1 Introduction Contents 1 Introduction . 1 This application note describes rework considerations 2 What is LGA? . 3 for the Land Grid Array (LGA) style package. 3 LGA Rework . 5 4 Package Removal . 6 Freescale has introduced radio frequency (RF) modules 5 LGA Reliability . 14 such as the MC1320x and MC1321x in LGA packages as 6 References . 14 an alternative package to ball grid array (BGA). The LGA packages reduce the amounts of lead in finished products and are Reduction of Hazardous Substances (RoHS) compliant, optimized for improved radio-frequency (RF) performance for wireless applications, and/or reduce the overall height of the package by eliminating the stand-off height associated with BGA balls. For assistance with any questions about the information contained in this note or for more details about the MC1320x and MC1321x devices, visit www.freescale.com/802154. or contact the appropriate product applications team. © Freescale Semiconductor, Inc., 2009. All rights reserved. Introduction 1.1 Acronyms and Abbreviations BGA Ball Grid Array BT Bismaleimide Triazine CBGA Ceramic Ball Grid Array CTE Coefficient of Thermal Expansion EU European Union ESD Electrostatic Discharge HCTE High Coefficient of Thermal Expansion HDI High Density Interconnect LGA Land Grid Array LTCC Low Temperature Co-fired Ceramic MSLn Moisture Sensitivity Level n NSMD Non-Solder Mask Defined OSP Organic Solderability Protectant PCB Printed Circuit Board RF Radio Frequency RoHS Reduction of Hazardous Substances SMD Solder Mask Defined SMT Surface Mount Technology Land Grid Array (LGA) Package Rework Application Note, Rev.
    [Show full text]
  • Recommendations for Board Assembly of Infineon Ball Grid Array Packages
    Recommendations for Board Assembly of Infineon Ball Grid Array Packages Additional Information Please read the Important Notice and Warnings at the end of this document Revision 4.0 www.infineon.com page 1 of 18 2020-11-09 Recommendations for Board Assembly of Infineon Ball Grid Array Packages Table of Contents Table of Contents Table of Contents ........................................................................................................................... 2 Acronyms and Abbreveations ........................................................................................................... 3 1 Package Description ............................................................................................................... 4 1.1 BGA Package Type ................................................................................................................................... 4 1.3 Package Features and General Handling Guidelines ............................................................................. 5 2 Printed Circuit Board .............................................................................................................. 7 2.1 Routing .................................................................................................................................................... 7 2.2 Pad Design ............................................................................................................................................... 7 3 PCB Assembly .......................................................................................................................
    [Show full text]
  • PDF Package Information
    This version: Apr. 2001 Previous version: Jun. 1997 PACKAGE INFORMATION 1. PACKAGE CLASSIFICATIONS This document is Chapter 1 of the package information document consisting of 8 chapters in total. PACKAGE INFORMATION 1. PACKAGE CLASSIFICATIONS 1. PACKAGE CLASSIFICATIONS 1.1 Packaging Trends In recent years, marked advances have been made in the electronics field. One such advance has been the progression from vacuum tubes to transistors and finally, to ICs. ICs themselves have been more highly integrated into LSIs, VLSIs, and now, ULSIs. With increased functions and pin counts, IC packages have had to change significantly in the last few years in order to keep-up with the advancement in semiconductor development. Functions required for conventional IC packages are as follows: 1) To protect IC chips from the external environment 2) To facilitate the packaging and handling of IC chips 3) To dissipate heat generated by IC chips 4) To protect the electrical characteristics of the IC Standard dual-in-line packages (DIP), which fulfill these basic requirements, have enjoyed wide usage in the electronics industry for a number of years. With increasing integration and higher speed ICs, and with the miniaturization of electronic equipment, newer packages have been requested by the industry which incorporate the functions listed below: 1) Multi-pin I/O 2) Ultra-miniature packages 3) Packages suited to high density ICs 4) Improved heat resistance for use with reflow soldering techniques 5) High throughput speed 6) Improved heat dissipation 7) Lower cost per pin In response to these requests, OKI has developed a diversified family of packages to meet the myriad requirements of today’s burgeoning electronics industry.
    [Show full text]
  • Quad Flat No-Lead (QFN) Evauation Test
    National Aeronautics and Space Administration Quad Flat No-Lead (QFN) Evaluation Testing Reza Ghaffarian, Ph.D. Jet Propulsion Laboratory Pasadena, California Jet Propulsion Laboratory California Institute of Technology Pasadena, California 6/17 National Aeronautics and Space Administration Quad Flat No-Lead (QFN) Evaluation Testing NASA Electronic Parts and Packaging (NEPP) Program Office of Safety and Mission Success Reza Ghaffarian, Ph.D. Jet Propulsion Laboratory Pasadena, California NASA WBS: 724297.40.43 JPL Project Number: 104593 Task Number: 40.49.02.35 Jet Propulsion Laboratory 4800 Oak Grove Drive Pasadena, CA 91109 http://nepp.nasa.gov 6/17 This research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, and was sponsored by the National Aeronautics and Space Administration Electronic Parts and Packaging (NEPP) Program. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not constitute or imply its endorsement by the United States Government or the Jet Propulsion Laboratory, California Institute of Technology. Copyright 2017. California Institute of Technology. Government sponsorship acknowledged. Acknowledgments The author would like to acknowledge many people from industry and the Jet Propulsion Laboratory (JPL) who were critical to the progress of this activity including the Rochester Institute of Technology (RIT). The author extends his appreciation to program managers of the National Aeronautics and Space
    [Show full text]
  • Building Your Prototype
    Building Your Prototype Prototype Construction Techniques Part Numbers Package Types Specification Sheets Schematic Diagrams Practical Advice T. Grotjohn, [email protected] Prototype Construction Techniques 1) Protoboard Use DIP components Keep your wires neat and color coded Prone to bad connections Maximum operating speed: ~ few MHz 2) Wire Wrap Often done using wire wrap sockets on a vector board Use DIP components Wire used is good for digital signals Be careful with high current lines because the wire is small. Typical wire: 30 gauge 0.34 Ω/m 28 gauge 0.21 Ω/m 3) Soldered Board Single solder points board Tied solder points board (Your mini project #1) PCB: printed circuit board PCB can be made for ECE 480 projects in the ECE Shop: See the shop’s web page. (Also see the next page) . Printed Circuit Board System General Information T-Tech Protyping Machine ECE 482 Student Project Design Department of Electrical and Computer Engineering, 1999 Michigan State University, East Lansing, Michigan, USA Part Numbers Typical Part Number: DM8095N Prefix: Indicates the manufacture of the part. See two pages in Attachment 1. Suffixes: Indicates temperature range: “military”, “industrial”, “commercial” Also the suffixes are used to indicate package types. The ECE shop deals most often with the following electronic part suppliers. Allied Electronics (www.alliedelec.com) Digi Key (www.digikey.com) Newark Electronics (www.newark.com) For other (non-electronic) supplies, suppliers often used are Grainger (www.grainger.com) McMaster Carr (www.mcmaster.com) Package Types DIP: Dual Inline Package Easiest to use. Works in protoboards, solder boards, wire wrapping, easiest to solder components to PCB This is your choice for ECE 480.
    [Show full text]
  • Design for Flip-Chip and Chip-Size Package Technology
    As originally published in the IPC APEX EXPO Proceedings. Design for Flip-Chip and Chip-Size Package Technology Vern Solberg Solberg Technology Consulting Madison, Wisconsin Abstract As new generations of electronic products emerge they often surpass the capability of existing packaging and interconnection technology and the infrastructure needed to support newer technologies. This movement is occurring at all levels: at the IC, at the IC package, at the module, at the hybrid, the PC board which ties all the systems together. Interconnection density and methodology becomes the measure of successfully managing performance. The gap between printed boards and semiconductor technology (wafer level integration) is greater than one order of magnitude in interconnection density capability, although the development of fine-pitch substrates and assembly technology has narrowed the gap somewhat. All viable efforts are being used in filling this void utilizing uncased integrated circuits (flip-chip) and incorporating more than one die or more than one part in the assembly process. This paper provides a comparison of different commonly used technologies including flip-chip, chip-size and wafer level array package methodologies detailed in a new publication, IPC-7094. It considers the effect of bare die or die-size components in an uncased or minimally cased format, the impact on current component characteristics and reviews the appropriate PCB design guidelines to ensure efficient assembly processing. The focus of the IPC document is to provide useful and practical information to those who are considering the adoption of bare die or die size array components. Introduction The flip-chip process was originally established for applications requiring aggressive miniaturization.
    [Show full text]
  • Case Study | Land Grid Array (LGA) Μmodule
    Case Study | Land Grid Array (LGA) μModule 645 Harvey Road Manchester, NH 03103 (603) 669‐9181 About EPE Corp. HIGH RELIABILITY EMS provider EPE Corp. Establishes Expertise in Land Grid Array Assembly and Wins Customer Certification www.epecorp.com EPE is a leading supplier of The land grid array (LGA) is a packaging technology with a square grid of flat contacts high‐reliability Electronic that are meant to interconnect with an opposing grid of contacts on a printed circuit Manufacturing Services. Our board (PCB). Also referred to as a QFN "Quad Flat No Lead" or MLFP "Micro Lead deep manufacturing and Frame Plastic" package, LGA packaging is related to ball grid array (BGA) and pin grid engineering expertise, strong array (PGA) packaging, but unlike pin grid arrays, land grid array packages are financial position, and designed to either fit into a socket or be soldered down using surface mount passionate dedication to technology. PGA packages cannot be soldered down using surface mount technology. quality and integrity are at the Further, land grid array packages in non‐socketed configurations use a flat contact foundation of an established which is soldered directly to the PCB, wheras BGA packages have balls as their structure that supports the contacts in between the IC and the PCBs. electronic manufacturing needs of customers in diverse The assembly of LGA packages using soldered surface mount technology is inherently industries – and a demanding challenging because the interface between the flat contacts and the PCB surface can marketplace trap air pockets, causing voids during processing. Such voids are exceptionally difficult to eliminate and to repair or rework the packages are both time consuming and carry GOAL signifciantly high costs.
    [Show full text]
  • Ball Grid Array and Chip Scale Packaging
    Technology Readiness Overview: BGA and CSP Packaging NEPP Program Document Technology Readiness Overview: Ball Grid Array and Chip Scale Packaging Reza Ghaffarian, Ph.D. NASA Electronic Parts and Packaging Program (NEPP) Tel: (818) 354-2059, [email protected] http://nepp.nasa.gov 256 I/O Quad Flat Pack (QFP) 256 I/O Ball Grid Array (BGA) 275 I/O Chip Scale Pkg. (CSP) 1992 1995 1999 January 2003 1 Technology Readiness Overview: BGA and CSP Packaging NEPP Program Document Overview of BGA and CSP Packaging Technology for Spaceflight Missions This document provides an overview for designing, manufacturing, and testing printed wiring assemblies populated with ball grid arrays (BGA) and chip scale packages (CSPs). NASA Headquarters, Code AE and Code Q, has funded numerous tasks for the last several years to investigate the use of BGAs and CSPs for potential spaceflight missions. The objectives of the NEPP (NASA Electronic Parts and Packaging) Program area array (BGA and CSP) projects were to evaluate the quality and reliability of these technologies and to assist in the development of the rapidly growing associated industrial infrastructure. This was successfully accomplished by organizing industry-wide consortia, led by the NEPP Program to address many issues with this technology. The principal investigator, as chairperson and in collaboration with industry, released findings in 2002 as industry qualification specification, IPC 9701, ”Performance Test Methods and Qualification Requirements for Surface Mount Solder Attachments”. This was published by IPC, Association Connecting Electronics Industries. CSPs QFP BGA Figure 1 Miniaturization trends in surface mount electronics packaging, from quad flat pack (QFP) to ball grid array (BGA) and chip scale package (CSP) Figure 1 compares a conventional leaded package with BGA and smaller configuration CSPs.
    [Show full text]
  • ORCA Or3lxxxb Series Field-Programmable Gate Arrays
    Product Brief January 2002 ORCA® OR3LxxxB Series Field-Programmable Gate Arrays Features ■ Abundant hierarchical routing resources based on routing two data nibbles and two control lines per ■ High-performance, cost-effective, 0.25 µm 5-level set provide for faster place and route implementa- metal technology. tions and less routing delay. ■ 2.5 V internal supply voltage and 3.3 V I/O supply ■ Individually programmable drive capability: 12 mA voltage for speed and compatibility. sink/6 mA source or 6 mA sink/3 mA source. ■ Up to 340,000 usable gates in 0.25 µm. ■ Built-in boundary scan (IEEE †1149.1 JTAG) and ■ Up to 612 user I/Os in 0.25 µm. (OR3LxxxB I/Os TS_ALL testability function to 3-state all I/O pins. are 5 V tolerant to allow interconnection to both ■ Enhanced system clock routing for low-skew, high- 3.3 V and 5 V devices, selectable on a per-pin speed clocks originating on-chip or at any I/O. basis, when using 3.3 V I/O supply.) ■ Up to four ExpressCLK inputs allow extremely fast ■ Twin-quad programmable function unit (PFU) clocking of signals on- and off-chip plus access to architecture with eight 16-bit look-up tables (LUTs) internal general clock routing. per PFU, organized in two nibbles for use in nibble- ■ StopCLK feature to glitchlessly stop/start the or byte-wide functions. Allows for mixed arithmetic ExpressCLKs independently by user command. and logic functions in a single PFU. Programmable I/O (PIO) has: ■ Nine user registers per PFU, one following each — Fast-capture input latch and input flip-flop (FF)/ LUT, plus one extra.
    [Show full text]
  • Ball Grid Array (BGA) Packaging 14
    Ball Grid Array (BGA) Packaging 14 14.1 Introduction The plastic ball grid array (PBGA) has become one of the most popular packaging alternatives for high I/O devices in the industry. Its advantages over other high leadcount (greater than ~208 leads) packages are many. Having no leads to bend, the PBGA has greatly reduced coplanarity problems and minimized handling issues. During reflow the solder balls are self-centering (up to 50% off the pad), thus reducing placement problems during surface mount. Normally, because of the larger ball pitch (typically 1.27 mm) of a BGA over a QFP or PQFP, the overall package and board assembly yields can be better. From a performance perspective, the thermal and electrical characteristics can be better than that of conventional QFPs or PQFPs. The PBGA has an improved design-to-produc- tion cycle time and can also be used in few-chip-package (FCPs) and multi-chip modules (MCMs) configurations. BGAs are available in a variety of types, ranging from plastic overmolded BGAs called PBGAs, to flex tape BGAs (TBGAs), high thermal metal top BGAs with low profiles (HL- PBGAs), and high thermal BGAs (H-PBGAs). The H-PBGA family includes Intel's latest packaging technology - the Flip Chip (FC)-style, H-PB- GA. The FC-style, H-PBGA component uses a Controlled Collapse Chip Connect die packaged in an Organic Land Grid Array (OLGA) substrate. In addition to the typical advantages of PBGA pack- ages, the FC-style H-PBGA provides multiple, low-inductance connections from chip to package, as well as, die size and cost benefits.
    [Show full text]