ISO Update Supplement to ISOfocus
December 2019
International Standards in process
ISO/CD Road vehicles — Electrically propelled road 21782-7 vehicles — Test specification for electric pro- An International Standard is the result of an agreement between pulsion components — Part 7: Operating load the member bodies of ISO. A first important step towards an Interna- testing of DC/DC converter tional Standard takes the form of a committee draft (CD) - this is cir- TC 23 Tractors and machinery for agriculture culated for study within an ISO technical committee. When consensus and forestry has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International ISO/CD 10522 Agricultural irrigation equipment — Direct- Standard (DIS). The DIS requires approval by at least 75 % of the acting pressure-regulating valves member bodies casting a vote. A confirmation vote is subsequently ISO/CD 11738 Agricultural irrigation equipment — Control carried out on a final draft International Standard (FDIS), the approval heads criteria remaining the same. ISO/CD 16438 Agricultural irrigation equipment — Thermo-
plastic collapsible hoses for irrigation — Speci-
fications and test methods ISO/CD Tractors and machinery for agriculture and 23316-1 forestry — Electrical high power interface 700VDC/480VAC — Part 1: General description ISO/CD Tractors and machinery for agriculture and 23316-2 forestry — Electrical high power interface CD registered 700VDC/480VAC — Part 2: Physical interface ISO/CD Tractors and machinery for agriculture 23316-3 and forestry — Electrical high power in- terface 700VDC/480VAC — Part 3: Safety Period from 01 November to 01 December 2019 requirements These documents are currently under consideration in the technical ISO/CD Tractors and machinery for agriculture and committee. 23316-4 forestry — Electrical high power interface They have been registred at the Central Secretariat. 700VDC/480VAC — Part 4: AC operation mode ISO/CD Tractors and machinery for agriculture and TC 2 Fasteners 23316-5 forestry — Electrical high power interface 700VDC/480VAC — Part 5: DC operation mode ISO/CD 14581 Fasteners — Hexalobular socket countersunk ISO/CD Tractors and machinery for agriculture flat head screws with reduced loadability 23316-6 and forestry — Electrical high power inter- TC 8 Ships and marine technology face 700VDC/480VAC — Part 6: Controls ISO/CD TS Ships and marine technology — Performance communication 22152.2 requirements for low bio-persistence alkaline ISO/CD Tractors and machinery for agriculture and earth silicate wool 23316-7 forestry — Electrical high power interface TC 17 Steel 700VDC/480VAC — Part 7: Mechanical integration ISO/DIS 630-2 Structural steels — Part 2: Technical delivery conditions for structural steels for general TC 31 Tyres, rims and valves purposes ISO/CD 5775-2 Bicycle tyres and rims — Part 2: Rims ISO/CD 630-3 Structural steels — Part 3: Technical delivery TC 34 Food products conditions for fine-grain structural steels ISO/DIS 23970 Milk, milk products and infant formulae — ISO/CD 630-4 Structural steels — Part 4: Technical delivery Determination of melamine and cyanuric acid conditions for high-yield-strength quenched in foodstuffs by liquid chromatography and and tempered structural steel plates tandem mass spectrometry (LC-MS/MS) TC 20 Aircraft and space vehicles ISO 4833- Microbiology of the food chain — Horizontal ISO/CD 23670 Space systems — Vibration testing 1:2013/CD method for the enumeration of microorgan- Amd 1 isms — Part 1: Colony count at 30 degrees C TC 22 Road vehicles by the pour plate technique — Amendment 1: ISO/CD Road vehicles — Component test methods for Clarification of scope 11452-9.2 electrical disturbances from narrowband radiat- ISO 4833- Microbiology of the food chain — Horizontal ed electromagnetic energy — Part 9: Portable 2:2013/CD method for the enumeration of microorganisms transmitters Amd 1 — Part 2: Colony count at 30 degrees C by the ISO/CD 13837 Road vehicles — Safety glazing materi- surface plating technique — Amendment 1: als — Method for the determination of solar Clarification of scope transmittance ISO/CD 4120 Sensory analysis — Methodology — Triangle ISO/CD Electrically propelled road vehicles — Test test sensory 21782-4 specification for electric propulsion compo- ISO/CD 8586 Sensory analysis — General guidelines for the nents — Part 4: Performance testing of DC/DC selection, training and monitoring of selected converter assessors and expert sensory assessors ISO/CD Electrically propelled road vehicles — Test TC 38 Textiles 21782-5 specification for electric propulsion compo- nents — Part 5: Operating load testing of ISO/CD 22958 Textiles — Water resistance — Rain tests: motor system exposure to a horizontal water spray ISO/CD 1973 Textile fibres — Determination of linear density — Gravimetric method and vibroscope method
ISO Update, Supplement to ISO Focus -- December 2019 1 ISO/CD 2403 Textiles — Cotton fibres — Determination of ISO/CD Industrial trucks — Sustainability — Part 2: micronaire value 23434-2 Factors and reporting ISO/CD 16549 Textiles — Unevenness of textile strands — TC 121 Anaesthetic and respiratory equipment Capacitance method ISO/CD Transportable liquid oxygen systems for medi- TC 42 Photography 18777-1 cal use — Particular requirements — Part 1: Base units ISO/CD Photography — Archiving systems — Image 19264-1 quality analysis — Part 1: Reflective originals ISO/CD Transportable liquid oxygen systems for medi- 18777-2 cal use — Particular requirements — Part 2: TC 43 Acoustics Portable units ISO/CD 5128 Acoustics — Measurement of noise inside mo- tor vehicles TC 123 Plain bearings ISO/CD 3548-1 Plain bearings — Thin-walled half bearings with TC 58 Gas cylinders or without flange — Part 1: Tolerances, design ISO/CD 23826 Gas cylinders — Ball valves — Specification features and methods of test and type testing ISO/CD Plain bearings — Hydrodynamic plain tilting ISO/CD 11623 Gas cylinders — Composite cylinders and 12130-1 pad thrust bearings under steady-state condi- tubes — Periodic inspection and testing tions — Part 1: Calculation of tilting pad thrust ISO/CD Gas cylinders — Cylinders and tubes of com- bearings 23876.2 posite construction — Acoustic emission (AE) TC 130 Graphic technology testing for periodic inspection and testing ISO/CD 2836.4 Graphic technology — Prints and printing TC 59 Buildings and civil engineering works inks — Assessment of resistance of prints to ISO/CD 6707-4 Buildings and civil engineering works — Vo- various agents cabulary — Part 4: Facility management terms ISO/CD 12635 Graphic technology — Plates for offset printing TC 61 Plastics — Dimensions ISO/CD 14298 Graphic technology — Management of security ISO/CD 23524 Plastics — Determination of fracture toughness printing processes of films and thin sheets: the essential work of fracture TC 135 Non-destructive testing TC 83 Sports and other recreational facilities ISO/CD 22290 Non-destructive testing — Infrared thermo- and equipment graphic testing — Thermoelastic stress meas- uring method — General Principles ISO/CD 7152 Camping tents and caravan awnings — Terms TC 138 Plastics pipes, fittings and valves for TC 85 Nuclear energy, nuclear technologies, the transport of fluids and radiological protection ISO/CD Plastics piping systems for the supply of gase- ISO/CD TR Quality management systems — Recommen- 16486-5 ous fuels — Unplasticized polyamide (PA-U) 4450 dations for the application of ISO 19443 piping systems with fusion jointing and me- ISO/CD 6980-1 Nuclear energy — Reference beta-particle chanical jointing — Part 5: Fitness for purpose radiation — Part 1: Methods of production of the system ISO/CD 6980-2 Nuclear energy — Reference beta-particle ISO/CD 7432 Glass-reinforced thermosetting plastics (GRP) radiation — Part 2: Calibration fundamentals pipes and fittings — Test methods to prove related to basic quantities characterizing the the design of locked socket-and-spigot joints, radiation field including double-socket joints, with elasto- ISO/CD 6980-3 Nuclear energy — Reference beta-particle meric seals radiation — Part 3: Calibration of area and ISO/CD Plastics piping systems for the supply of personal dosemeters and the determination of 16486-4 gaseous fuels — Unplasticized polyamide their response as a function of beta radiation (PA-U) piping systems with fusion jointing and energy and angle of incidence mechanical jointing — Part 4: Valves TC 92 Fire safety TC 147 Water quality ISO/CD TS Fire safety — Statistical data collection — Part ISO/CD 10703 Water quality — Determination of the activity 17755-2 2: Definition of terms concentration of radionuclides — Method by ISO/CD TR Guidance for assessing the validity of physical high resolution gamma-ray spectrometry 16312-2 fire models for obtaining fire effluent toxicity TC 150 Implants for surgery data for fire hazard and risk assessment — Part ISO/CD TS Implants for surgery — Standard guide to as- 2: Evaluation of individual physical fire models 20721 sessment of absorbable metallic implants TC 96 Cranes ISO 13779- Implants for surgery — Hydroxyapatite — Part ISO/CD Cranes — Design calculation for rail wheels 3:2018/CD 3: Chemical analysis and characterization of 16881-1 and associated trolley track supporting struc- Amd 1 crystallinity ratio and phase purity — Amend- ture — Part 1: ment 1 TC 106 Dentistry TC 156 Corrosion of metals and alloys ISO/CD 24234 Dentistry — Dental amalgam ISO/CD 24020 Corrosion of metals and alloys Standard test TC 107 Metallic and other inorganic coatings method for particle-free erosion corrosion of metallic materials by jet-in-slit ISO/CD 1463 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method TC 172 Optics and photonics ISO/CD 4518 Metallic coatings — Measurement of coating ISO/CD 8600-8 Endoscopes — Medical endoscopes and en- thickness — Profilometric method dotherapy devices — Part 8: Particular require- ments for capsule endoscopes TC 110 Industrial trucks ISO/CD Industrial trucks — Sustainability — Part 1: 23434-1 Vocabulary
2 ISO Update, Supplement to ISO Focus -- December 2019 ISO/CD Microscopes — Definition and measurement of ISO/CD Cryogenic vessels — Pressure-relief accesso- 19056-3 illumination properties — Part 3: Incident light 21013-1 ries for cryogenic service — Part 1: Reclosable fluorescence microscopy with incoherent light pressure-relief valves sources TC 255 Biogas ISO/CD 9342-1 Optics and optical instruments — Test lenses ISO/CD 24252 Biogas systems — non-household and for calibration of focimeters — Part 1: Refer- non-gasification ence lenses for focimeters used for measuring spectacle lenses TC 258 Project, programme and portfolio ISO/CD Ophthalmic instruments — Fundamental management 15004-2 requirements and test methods — Part 2: Light ISO/CD 21502 Project, Programme and Portfolio Management hazard protection — Guidance on Project Management ISO/CD 15253 Ophthalmic optics and instruments — Optical TC 286 Collaborative business relationship and electro-optical devices for enhancing low management vision ISO/CD 44003 Guidelines for micro, small and medium-sized ISO/CD 15798 Ophthalmic implants — Ophthalmic viscosurgi- enterprises on the implementation of the cal devices principles of collaborative business relationship TC 173 Assistive products management ISO/CD Assistive products for walking, manipulated by TC 300 Solid Recovered Fuels 11199-1 both arms — Requirements and test methods ISO/CD 22940 Solid recovered fuels — Determination of – — Part 1: Walking frames elemental composition by X-ray fluorescence ISO/CD Assistive products for walking, manipulated by JTC 1 Information technology 11199-2 both arms — Requirements and test methods — Part 2: Rollators ISO/IEC CD Information technology — International string 14651 ordering and comparison — Method for com- TC 174 Jewellery and precious metals paring character strings and description of the ISO/DIS 24016 Jewellery and precious metals — Grading pol- common template tailorable ordering ished diamonds — Terminology, classification ISO/IEC Information technology — Security techniques and test methods 10118-1:2016/ — Hash-functions — Part 1: General — TC 202 Microbeam analysis CD Amd 1 Amendment 1 ISO/CD 23692 Quantitative analysis of Mn dendritic segrega- ISO/IEC CD Information security controls tion in continuously cast steel product 27002 TC 204 Intelligent transport systems ISO/IEC CD Information technology — Security techniques 27022 — Guidance on ISMS processes ISO/CD TS Intelligent transport systems — Roadside mod- 20684-10 ules SNMP data interface — Part 10: Variable ISO/IEC CD Information Technology — Security techniques message signs 27099 — Public key infrastructure — Practices and policy framework ISO/CD 22737 Intelligent transport systems — Low-speed au- tomated driving (LSAD) systems for predefined ISO/IEC CD TS Information technology — Security techniques routes — Performance requirements, system 27101 — Cybersecurity — Framework development requirements and performance test procedures guidelines TC 206 Fine ceramics ISO/IEC CD Information technology — Office equipment — 23385 Method for measuring digital photo print out ISO/CD 21820 Fine ceramics (advanced ceramics, advanced time technical ceramics) — Ultraviolet photolumi- nescence image test method for analyzing ISO/IEC Information technology — Multimedia applica- polytypes of conductive SiC crystals 23000- tion format (MPEG-A) — Part 21: Visual identity 21:2019/CD management application format — Amendment TC 212 Clinical laboratory testing and in vitro Amd 1 1: Reference software and conformance diagnostic test systems ISO/IEC FDIS Information technology — Dynamic adaptive ISO/CD 23118 Molecular in vitro diagnostic examinations — 23009-1/CD streaming over HTTP (DASH) — Part 1: Media Specifications for pre-examination processes Amd 1 presentation description and segment formats for metabolomics in urine, venous blood serum — Amendment 1: CMAF support, events and plasma processing model and other extensions TC 213 Dimensional and geometrical product ISO/IEC CD Information technology — Coded representa- specifications and verification 23090-2 tion of immersive media — Part 2: Omnidirec- tional media format ISO/CD Geometrical product specifications (GPS) — 16610-45 Filtration — Part 45: Part 45: Profile Morpho- ISO/IEC CD Information technology — Coded representa- logical: Segmentation 23090-6 tion of immersive media — Part 6: Immersive media metrics TC 215 Health informatics ISO/IEC CD Information technology — Coded representa- ISO/CD TR Health informatics — Introduction to Ayurveda 23090-10 tion of immersive media — Part 10: Carriage of 4421 Video-based Point Cloud Compression Data ISO/CD TS Health informatics, requirements for medication ISO/IEC CD General video coding — Part 2: Low complex- 22703 safety alerts 23094-2 ity enhancement video coding TC 216 Footwear ISO/IEC CD Information technology — Automatic identifi- ISO/CD 19957 Footwear — Test methods for heels — Heel pin 23634 cation and data capture techniques — Poly- holding strength chrome bar code symbology (JAB-Code) TC 220 Cryogenic vessels ISO/IEC CD TR Information technology — Business operational 15944-14 view — Part 14: Open-edi, model and cloud ISO/CD 21011 Cryogenic vessels — Valves for cryogenic computing architecture service ISO/IEC CD TR Information technology database languages — 19075-9 SQL technical reports — Part 9: SQL TR OLAP
ISO Update, Supplement to ISO Focus -- December 2019 3 ISO/IEC CD Information technology — Metamodel frame- ISO/DIS Road vehicles — Clock exten- 19763-16 work for interoperability (MFI) — Part 16: Meta- 20794-7 sion peripheral interface (CXPI) model for document model registration — Part 7: Data link and physical 2020-02-05 layer conformance test plan ISO/IEC CD TR Conceptual model and system architecture of 4338 smart classroom ISO/DIS Road vehicles — Fuse-links — 8820-10 Part 10: Fuse-links with tabs ISO/IEC CD TR Reference Model for ICT Evaluation in Type L (high current miniature) 2020-02-07 4339 Education
ISO/IEC CD TR Information technology – Cloud computing – (Revision of ISO 8820-10:2015) 23951 Guidance for using the cloud SLA metric model ISO/DIS Internal combustion engines — ISO/IEC CD Artificial intelligence — Concepts and 6621-3 Piston rings — Part 3: Material 22989 terminology specifications 2020-02-11
(Revision of ISO 6621-3:2000) ISO/DIS 22561 Gasoline engines with direct fuel injection (GDI engines) — In- stallation of the injectors to the 2020-02-06 engine ISO/DIS Road vehicles — Fully automatic DIS circulated 13044-2 coupling systems 24 V (FACS) for heavy commercial vehicle 2020-02-19 combinations — Part 2: Electri- Period from 01 November to 01 December 2019 cal and pneumatic interface for 50 mm fifth wheel couplings These documents have obtained substantial support within the ap- (Revision of ISO 13044-2:2013) propriate ISO technical committee. TC 23 Tractors and machinery for They have been submitted to the ISO member bodies for voting by agriculture and forestry the date shown. ISO/DIS 23130 Milking and cooling machine * Available in English only installations — Monitoring device for bulk milk cooling tanks 2020-01-24 — Requirements Vote ISO/DIS 21191 Equipment for crop protection — terminates Closed transfer systems (CTS) — Performance specification 2020-02-14 TC 2 Fasteners ISO/DIS 4042 Fasteners — Electroplated coat- TC 29 Small tools ing systems ISO/DIS 8405 Tools for moulding — Ejec- 2020-02-06 tor sleeves with cylindrical head — Basic series for general 2020-01-28 (Revision of ISO 4042:2018) purposes TC 8 Ships and marine (Revision of ISO 8405:2013) technology ISO/DIS Tools for pressing — Guide 9182-3 pillars — Part 3: Type B, end- ISO/DIS 22547 Ships and marine technology — locking pillars 2020-01-28 Performance test procedure for
high-pressure pump in LNG Fuel 2020-01-28 (Revision of ISO 9182-3:2013) Gas Supply Systems (FGSS) for ship ISO/DIS Tools for pressing — Guide pil- 9182-4 lars — Part 4: Type C, pillars with ISO/DIS 22548 Ships and marine technology taper lead and bush 2020-01-29 — Performance test procedure
of vessel LNG Fuel Gas Supply 2020-01-28 (Revision of ISO 9182-4:2013) Systems (FGSS) ISO/DIS Tools for pressing — Guide ISO/DIS 799-2 Ships and marine technol- 9182-5 pillars — Part 5: Type D, end- ogy — Pilot ladders — Part 2: locking pillars with flange 2020-01-28 Maintenance, use, survey, and 2020-02-19
inspection (Revision of ISO 9182-5:2013) TC 17 Steel ISO/DIS 23481 Tools for pressing — Cam driver ISO/DIS Classification of steel based on plates 4948.2 chemical composition 2020-01-28 2020-01-03 (Revision of ISO 23481:2013) (Revision of ISO 4948-1:1982, TC 34 Food products ISO 4948-2:1981) ISO/DIS Microbiology of the food chain TC 22 Road vehicles 23036-1 — Methods for the detection of ISO/DIS Road vehicles — Clock exten- Anisakidae L3 larvae in fish and 2020-01-27 20794-5 sion peripheral interface (CXPI) fishery products — Part 1: UV- — Part 5: Application layer 2020-02-05 press method conformance test plan ISO/DIS Microbiology of the food chain ISO/DIS Road vehicles — Clock exten- 23036-2 — Methods for the detection 20794-6 sion peripheral interface (CXPI) of Anisakidae L3 larvae in fish 2020-01-27 — Part 6: Transport and network 2020-02-05 and fishery products — Part 2: layer conformance test plan Artificial digestion method
4 ISO Update, Supplement to ISO Focus -- December 2019 ISO/DIS 20784 Guidance on substantiation for TC 76 Transfusion, infusion sensory and consumer claims and injection, and blood 2020-02-03 processing equipment for medical and pharmaceuti- TC 35 Paints and varnishes cal use ISO/DIS 2810 Paints and varnishes — Natural ISO/DIS 719 Glass — Hydrolytic resistance of weathering of coatings — Expo- glass grains at 98 degrees C — sure and assessment 2020-02-11 Method of test and classification 2020-02-20
(Revision of ISO 2810:2004) (Revision of ISO 719:1985) TC 37 Language and terminology ISO/DIS 720 Glass — Hydrolytic resistance of glass grains at 121 degrees C — ISO/DIS Language resources manage- Method of test and classification 2020-02-20 24617-2 ment — Semantic annotation
framework (SemAF) — Part 2: 2020-02-05 Dialogue acts (Revision of ISO 720:1985) (Revision of ISO 24617-2:2012) TC 86 Refrigeration and TC 38 Textiles air-conditioning ISO/DIS Textiles — Quantitative chemi- ISO 5149- Refrigerating systems and heat 1833-25 cal analysis — Part 25: Mixtures 1:2014/DAmd pumps — Safety and environ- of polyester with certain other 2020-02-20 2 mental requirements — Part 1: 2020-02-03 fibres (method using trichloro- Definitions, classification and se- acetic acid and chloroform) lection criteria — Amendment 2 (Revision of ISO 1833-25:2013) ISO 5149- Refrigerating systems and heat TC 44 Welding and allied 3:2014/DAmd pumps — Safety and environ- 1 mental requirements — Part 3: 2020-02-03 processes Installation site — Amendment 1 ISO/DIS Welding consumables — Test ISO/DIS 21978 Heat pump water heater — 15792-2 methods — Part 2: Preparation Testing and rating at part load of single-run and two-run tech- 2020-02-05 conditions and calculation on 2020-02-06 nique test specimens in steel seasonal coefficient of perfor- (Revision of ISO 15792-2:2000) mance for space heating TC 54 Essential oils TC 96 Cranes ISO/DIS 19332 Essential oil of matricaria [Matri- ISO/DIS Cranes — Vocabulary — Part 4: caria chamomilla L. syn. Chamo- 4306-4 Jib cranes milla recutita (L) Rauschert] 2020-02-06 2020-01-31
(Revision of ISO 19332:2007) TC 106 Dentistry TC 58 Gas cylinders ISO/DIS 10873 Dentistry — Denture adhesives ISO/DIS 17871 Gas cylinders — Quick-release
cylinder valves — Specification 2020-02-20 and type testing 2020-02-20
(Revision of ISO 10873:2010) (Revision of ISO 17871:2015, ISO 17871:2015/Amd 1:2018) TC 107 Metallic and other inorgan- TC 67 Materials, equipment and ic coatings offshore structures for pe- ISO/DIS 12671 Thermal spraying - Thermally troleum, petrochemical and sprayed coatings - Symbolic natural gas industries representation on drawings 2020-02-13
ISO/DIS Petroleum and natural gas indus- (Revision of ISO 12671:2012) 15590-2 tries — Factory bends, fittings and flanges for pipeline transpor- 2020-01-27 ISO/DIS 16866 Metallic and other inorganic tation systems — Part 2: Fittings coatings — Simultaneous thick- (Revision of ISO 15590-2:2003) ness and electrode potential 2020-02-03 determination of individual layers ISO/DIS Petroleum and natural gas indus- in multilayer nickel deposits 15590-3 tries — Factory bends, fittings (STEP test) and flanges for pipeline transpor- 2020-01-27 tation systems — Part 3: Flanges ISO/DIS 23363 Electrodeposited coatings and (Revision of ISO 15590-3:2004) related finishes — Electroless Ni- P-ceramic composite coatings 2020-02-10 TC 69 Applications of statistical methods TC 120 Leather ISO/DIS Control charts — Part 4: Cumu- ISO Leather — Leather for dress 7870-4 lative sum charts 14930:2012/ gloves — Specification — 2020-01-28 DAmd 1 Amendment 1: Colour fastness 2020-01-31
to to-and-fro rubbing (Revision of ISO 7870-4:2011) ISO/DIS 16337 Application of statistical and TC 121 Anaesthetic and respiratory related methods to new technol- equipment ogy and product development 2020-01-31 process — Robust Tolerance Design (RTD)
ISO Update, Supplement to ISO Focus -- December 2019 5 ISO/DIS 26825 Anaesthetic and respira- ISO/DIS 23226 Corrosion of metals and alloys — tory equipment — User-applied Guidelines for corrosion testing labels for syringes containing 2020-01-31 of metals and alloys exposed in 2020-01-29 drugs used during anaesthe- deep sea water sia — Colours, design and TC 161 Controls and protective performance (Revision of ISO 26825:2008) devices for gas and/or oil ISO/DIS 4135 Anaesthetic and respiratory ISO/DIS Gas pressure safety and control equipment — Vocabulary and 23555-1 devices for use in gas transmis- semantics 2020-02-18 sion, distribution and installa- 2020-01-24 tions for inlet pressures up to (Revision of ISO 4135:2001) and including 10 MPa — Part 1: General requirements TC 126 Tobacco and tobacco TC 172 Optics and photonics products ISO/DIS Optics and photonics — Test ISO/DIS 23921 Cigarettes — Determination of 21395-1 method for refractive index of tobacco specific nitrosamines in optical glasses — Part 1: Mini- 2020-01-28 mainstream cigarette smoke un- 2020-01-31 mum deviation method der intense smoking conditions — Method using LC-MS/MS TC 183 Copper, lead, zinc ISO/DIS 23922 Cigarettes — Determination and nickel ores and of selected carbonyls in the concentrates mainstream smoke of cigarettes 2020-01-31 ISO Copper, lead, zinc and nickel under intense smoking condi- 12743:2018/ concentrates — Sampling proce- tions — Method using high per- DAmd 1 dures for determination of metal 2020-02-18 formance liquid chromatography and moisture content — Amend- ISO/DIS 23923 Cigarettes — Determination ment 1 of selected volatile organic TC 184 Automation systems and compounds in the mainstream 2020-02-03 integration smoke of cigarettes under intense smoking conditions — ISO/DIS Automation systems and integra- Method using GC/MS 16400-1 tion — Equipment behaviour catalogues for virtual production 2020-02-19 TC 131 Fluid power systems system — Part 1: Overview ISO/DIS Hydraulic fluid power — Hous- TC 204 Intelligent transport 7425-1 ings for elastomer-energized, systems plastic-faced seals — Dimen- 2020-01-24 sions and tolerances — Part 1: ISO/DIS Intelligent transport systems Piston seal housings 17515-2 — Evolved universal terrestrial (Revision of ISO 7425-1:1988) radio access network (E-UTRAN) 2020-01-24 — Part 2: Device to device com- ISO/DIS Hydraulic fluid power — Hous- munications (D2D) 7425-2 ings for elastomer-energized, plastic-faced seals — Dimen- 2020-01-24 ISO/DIS Intelligent transport systems — sions and tolerances — Part 2: 20529-2 Framework for Green ITS (G-ITS) Rod seal housings standards — Part 2: Integrated 2020-02-12 (Revision of ISO 7425-2:1989) mobile service applications TC 134 Fertilizers, soil conditioners TC 205 Building environment and beneficial substances design ISO/DIS 22862 Fertilizers and soil conditioners ISO/DIS Energy performance of buildings — Compound fertilizer — Gen- 52127-1 — Building management system eral requirements 2020-01-29 — Part 1: Module M10-12 2020-01-24
TC 146 Air quality TC 207 Environmental ISO/DIS Indoor air — Part 28: Determina- management 16000-28 tion of odour emissions from ISO/DIS 14091 Adaptation to climate change building products using test 2020-02-06 — Guidelines on vulnerability, chambers impacts and risk assessment 2020-02-17 (Revision of ISO 16000-28:2012) TC 149 Cycles TC 212 Clinical laboratory testing ISO/DIS Cycles — Safety requirements and in vitro diagnostic test 4210-10.2 for bicycles — Part 10: Safety re- systems quirements for electrically power 2020-01-20 ISO/DIS In vitro diagnostic test systems assisted cycles (EPACs) 17822-2 — Nucleic acid amplification- TC 156 Corrosion of metals and based examination procedures 2020-01-31 alloys for detection and identification of microbial pathogens — Part 2: ISO/DIS 22910 Corrosion of metals and alloys Laboratory quality practice guide — Measurement of the elec- trochemical critical localized 2020-01-27 TC 215 Health informatics corrosion temperature (E-CLCT) ISO/DIS Health informatics — Service for stacked Ti alloys fabricated 12967-1 architecture (HISA) — Part 1: by the additive manufacturing Enterprise viewpoint 2020-01-24 method (Revision of ISO 12967-1:2009)
6 ISO Update, Supplement to ISO Focus -- December 2019 ISO/DIS Health informatics — Service ISO/IEC DIS Information technology — Open 12967-2 Architecture (HISA) — Part 2: 30118-2 Connectivity Foundation (OCF) Information viewpoint 2020-01-24 Specification — Part 2: Security 2020-02-18 specification (Revision of ISO 12967-2:2009) (Revision of ISO/IEC 30118-2:2018) ISO/DIS Health informatics — Service 12967-3 Architecture (HISA) — Part 3: ISO/IEC DIS Information technology — Open Computational viewpoint 2020-01-24 30118-3 Connectivity Foundation (OCF) Specification — Part 3: Bridging 2020-02-18 (Revision of ISO 12967-3:2009) specification (Revision of ISO/IEC ISO/DIS 21860 Health Informatics — Reference 30118-3:2018) standards portfolio (RSP) — Clinical imaging 2020-01-24 ISO/IEC DIS Information technology — Open 30118-4 Connectivity Foundation (OCF) Specification — Part 4: Resource 2020-02-18 ISO/DIS Health software and health IT type specification 81001-1 systems safety, effectiveness (Revision of ISO/IEC and security — Part 1: Founda- 2020-02-02 tional principles, concepts, and 30118-4:2018) terms ISO/IEC DIS Information technology — Open TC 216 Footwear 30118-5 Connectivity Foundation (OCF) Specification — Part 5: Smart 2020-02-18 ISO/DIS 24267 Friction — Test methods for cas- home device specification ual footwear and components (Revision of ISO/IEC 2020-02-06 30118-5:2018)
ISO/IEC DIS Information technology — Open TC 228 Tourism and related 30118-6 Connectivity Foundation (OCF) services Specification — Part 6: Resource 2020-02-18 to AllJoyn interface mapping ISO/DIS 22876 Tourism and related services specification — Bareboat charter — Sup- (Revision of ISO/IEC plementary charter services and 2020-02-05 30118-6:2018) experiences ISO/IEC DIS Information technology - Open TC 260 Human resource 30118-7 Connectivity Foundation (OCF) management Specification — Part 7: Wi-Fi 2020-02-18 ISO/DIS 30415 Human resource management — easy setup specification Diversity and inclusion ISO/IEC DIS Information technology — open 2020-02-19 30118-8 connectivity foundation (OCF) - Part 8 - cloud specification — 2020-02-18 TC 282 Water reuse Part 8: Cloud Specification ISO/DIS Guidelines for performance ISO/IEC DIS Information technology — Open 20468-4 evaluation of treatment technolo- 30118-9 connectivity foundation (OCF) — gies for water reuse systems — 2020-02-19 Part 9: OCF resource to oneM2M 2020-02-18 Part 4: UV Disinfection resource mapping specification ISO/DIS Guidelines for performance ISO/IEC DIS Information technology — Open 20468-6 evaluation of treatment technolo- 9594-11 systems interconnection — The gies for water reuse systems 2020-02-20 directory — Part 11: Proto- 2020-02-14 — Part 6: Ion exchange and col specifications for secure electrodialysis operations TC 298 Rare earth ISO/IEC DIS Systems and software engi- 23531 neering — Capabilities of issue ISO/DIS Rare earth — Terms and defini- management tools 2020-02-10 22444-1 tions — Part 1: Minerals, oxides and other compounds 2020-02-03 ISO/IEC DIS Information technology — Radio 18046-3 frequency identification device ISO/DIS Rare earth — Terms and defini- performance test methods — 2020-02-19 22444-2 tions — Part 2: Metals and their Part 3: Test methods for tag alloys 2020-02-03 performance (Revision of ISO/IEC TC 304 Healthcare organization 18046-3:2012) management ISO/IEC DIS Information technology — Con- ISO/DIS 22956 Healthcare organization manage- 19823-16 formance test methods for secu- ment— Guidelines for patient rity service crypto suites — Part 2020-02-19 centered staffing 2020-02-05 16: Crypto suite ECDSA-ECDH security services for air interface communications JTC 1 Information technology ISO/IEC DIS Information technology — Radio ISO/IEC DIS Information technology — Open 29160 frequency identification for item 30118-1 Connectivity Foundation (OCF) management — RFID Emblem 2020-02-19 Specification — Part 1: Core 2020-02-18 specification (Revision of ISO/IEC (Revision of ISO/IEC 29160:2012) 30118-1:2018)
ISO Update, Supplement to ISO Focus -- December 2019 7 ISO/IEC DIS Information technology — Vir- ISO/FDIS Paper, board and pulps — De- 22121-2 tual keyboards user interfaces 6588-2 termination of pH of aqueous — Part 2: On-screen keyboards 2020-02-14 extracts — Part 2: Hot extraction 2020-01-16 with direct touch interface ISO/IEC DIS Information technology — Bio- (Revision of ISO 6588-2:2012) 19795-1 metric performance testing and ISO/FDIS Paper and board — Determina- reporting — Part 1: Principles 2020-02-19 2493-2 tion of resistance to bending — and framework Part 2: Taber-type tester 2020-01-09 (Revision of ISO/IEC 19795-1:2006) (Revision of ISO 2493-2:2011)
TC 8 Ships and marine technology ISO/PRF Ships and marine technology — 20661 Cutter suction dredger supervi- sory and control systems ISO/PRF Ships and marine technology — 20662 Hopper dredger supervisory and FDIS circulated control systems ISO/PRF Ships and marine technology — 20663 Grab dredger supervisory and Period from 01 November to 01 December 2019 control systems These Final draft International Standards have been submitted to the ISO/FDIS 5480 Ships and marine technology — ISO member bodies for formal approval by the date shown Guardrails for cargo ships * Available in English only 2020-01-17
(Revision of ISO 5480:1979) Vote ISO/PRF Ships and marine technology — terminates 23121-1 Inflatable buoyancy support sys- tems against flooding of ships — Part 1: Gas supply system PC 303 Guidelines on consumer warranties and guarantees ISO/PRF Ships and marine technology — 23121-2 Inflatable buoyancy support sys- ISO/PRF Guidelines on consumer tems against flooding of ships 22059 warranties/guarantees — Part 2: Buoyancy chamber
ISO/PRF Ships and marine technology — PC 320 Tableware, giftware, jewel- 23430 Specification of high manganese lery and luminaries, made austenitic steel thin strips used of glass - Glass clarity for LNG tanks on board ships - Classification and test TC 10 Technical product method documentation ISO/PRF Tableware, giftware, jewellery ISO/FDIS Technical product documenta- 24117 and luminaries, made of glass 21143 tion — Requirements for digital — Glass clarity — Classification mock-up virtual assembly test 2020-01-08 and test method for mechanical products TC 1 Screw threads TC 12 Quantities and units ISO 68-1:1998/ ISO general purpose screw ISO/FDIS Quantities and units — Part 8: PRF Amd 1 threads — Basic profile — Part 80000-8.2 Acoustics 1: Metric screw threads — 2020-01-16 Amendment 1 ISO 68-2:1998/ ISO general-purpose screw (Revision of ISO 80000-8:2007) PRF Amd 1 threads — Basic profile — Part TC 17 Steel 2: Inch screw threads — Amend- ment 1 ISO/FDIS 439 Steel and cast irons — Deter- mination of silicon content — ISO ISO miniature screw threads — Gravimetric method 2019-12-31 1501:2009/ Amendment 1: The figure for the PRF Amd 1 tolerance zone of external thread (Revision of ISO 439:1994) ISO/PRF 2904 ISO metric trapezoidal screw ISO/FDIS 9647 Steels — Determination of threads — Basic dimensions vanadium content — Flame atomic absorption spectrometric 2019-12-30 (Revision of ISO 2904:1977) method (FAAS) TC 4 Rolling bearings (Revision of ISO 9647:1989) ISO Rolling bearings — Symbols for ISO/FDIS 4986 Steel castings - Magnetic parti- 15241:2012/ physical quantities — Amend- cle testing PRF Amd 1 ment 1 2019-12-31
TC 6 Paper, board and pulps (Revision of ISO 4986:2010) ISO/FDIS Paper, board and pulps — De- ISO/FDIS 4987 Steel castings - Liquid penetrant 6588-1 termination of pH of aqueous ex- testing tracts — Part 1: Cold extraction 2020-01-10 2019-12-31
(Revision of ISO 6588-1:2012) (Revision of ISO 4987:2010)
8 ISO Update, Supplement to ISO Focus -- December 2019 ISO/PRF Steel and iron castings — Visual ISO/FDIS Refrigerated hydrocarbon fluids 11971 testing of surface quality 21903 — Dynamic measurement — Requirements and guidelines for 2020-01-08 (Revision of ISO 11971:2008) the calibration and installation of flowmeters used for lique- TC 20 Aircraft and space vehicles fied natural gas (LNG) and other ISO/PRF Air cargo equipment — Restraint refrigerated hydrocarbon fluids 16049-1 straps — Part 1: Design criteria and testing methods TC 34 Food products (Revision of ISO 16049-1:2013) ISO/TS 26030 Social responsibility and sustain- able development — Guidance ISO/PRF Air cargo equipment — Restraint on using ISO 26000:2010 in the 16049-2 straps — Part 2: Utilization food chain requirements and recommenda- tions and lashing calculations ISO/FDIS 665 Oilseeds — Determination of (Revision of ISO 16049-2:2013) moisture and volatile matter content 2020-01-28 ISO/PRF Space link extension — Cross
23103 support transfer service — (Revision of ISO 665:2000) Specification framework ISO/PRF Milk — Bacterial count — Proto- ISO/PRF Space link extension — Cross 16297 col for the evaluation of alterna- 23104 support transfer service — Moni- tive methods tored data service (Revision of ISO 16297:2013) ISO/FDIS Space systems — Program man- ISO/PRF Milk and milk products — 22137 agement — Test reviews 23291 Guidelines for the application 2020-01-20 of in-line and on-line infrared
spectrometry ISO/FDIS Categorization and classifica- ISO/PRF Milk-based infant formula 21895 tion of civil unmanned aircraft 23293 powders — Quantification of systems 2020-01-13 whey protein content by sodium
dodecyl sulfate-capillary gel TC 22 Road vehicles electrophoresis (SDS-CGE) ISO/FDIS Road vehicles — Unified diag- ISO 6887- Microbiology of the food chain 14229-8 nostic services (UDS) — Part 8: 3:2017/FDAmd — Preparation of test samples, USD on Clock eXtension Periph- 2020-01-14 1 initial suspension and decimal 2020-01-21 eral Interface (UDSonCXPI) dilutions for microbiological ISO/FDIS Road vehicles — In-vehicle examination — Part 3: Specific 21111-4 Ethernet — Part 4: General rules for the preparation of fish requirements and test meth- 2020-01-15 and fishery products — Amend- ods of optical gigabit Ethernet ment 1: Sample preparation for components raw marine gastropods ISO/FDIS Electrically propelled road TC 37 Language and terminology 17409 vehicles — Conductive power ISO/FDIS Language resource management transfer — Safety requirements 2020-01-17 24613-2 — Lexical markup framework (LMF) — Part 2: Machine read- 2020-01-17 (Revision of ISO 17409:2015) able dictionary (MRD) model ISO/PRF TR Road vehicles — Human perfor- (Revision of ISO 24613:2008) 21959-1 mance and state in the context TC 38 Textiles of automated driving — Part 1: Common underlying concepts ISO/PRF 2648 Wool — Determination of fibre (Revision of ISO/TR length distribution parameters — 21959-1:2018) Capacitance method (Revision of ISO 2648:1974) TC 23 Tractors and machinery for TC 44 Welding and allied agriculture and forestry processes ISO/FDIS Agricultural machinery — Safety 4254-6.2 — Part 6: Sprayers and liquid ISO/FDIS Health and safety in welding and fertilizer distributors 2020-01-15 21904-1 allied processes — Equipment for capture and separation of 2019-12-30 (Revision of ISO 4254-6:2009) welding fume — Part 1: General requirements TC 24 Particle characterization (Revision of ISO 15012-4:2016) including sieving TC 45 Rubber and rubber ISO/PRF Particle size analysis — Laser products 13320 diffraction methods ISO/PRF 8789 Rubber hoses and hose as- (Revision of ISO 13320:2009) semblies for liquefied petro- leum gas in motor vehicles TC 28 Petroleum and related — Specification products, fuels and lu- (Revision of ISO 8789:2018) bricants from natural or ISO/FDIS Rubber — Analysis by pyrolytic synthetic sources 7270-1 gas-chromatographic meth- ods — Part 1: Identification of 2019-12-30 polymers (single polymers and polymer blends) (Revision of ISO 7270-1:2003, ISO 7270-1:2003/Amd 1:2010)
ISO Update, Supplement to ISO Focus -- December 2019 9 ISO/PRF 7725 Rubber and rubber products — ISO/ASTM Practice for use of calorimetric Determination of chlorine and FDIS 51631 dosimetry systems for dose bromine content measurements and dosimetry 2020-01-15 (Revision of ISO 7725:1991) system calibration in electron beams TC 54 Essential oils (Revision of ISO/ASTM ISO/FDIS 3475 Essential oil of aniseed (Pimp- 51631:2013) inella anisum L.) ISO/FDIS Radiological protection — Moni- 2020-01-01 20031 toring and dosimetry for internal
exposures due to wound con- 2020-01-17 (Revision of ISO 3475:2002) tamination with radionuclides ISO/FDIS Essential oil of clementine (Citrus 21631 clementina hort. ex Tanaka syn. TC 86 Refrigeration and Citrus reticulata Blanco x Citrus 2020-01-01 air-conditioning sinensis (L.) Osbeck), Spanish ISO/PRF 916 Testing of refrigerating systems type TC 61 Plastics (Revision of ISO/R 916:1968) ISO/FDIS 75-1 Plastics — Determination of tem- perature of deflection under load TC 91 Surface active agents — Part 1: General test method 2020-01-21 ISO/FDIS 685 Analysis of soaps — Determina- tion of total alkali content and (Revision of ISO 75-1:2013) total fatty matter content 2020-01-16 ISO/FDIS Plastics — Polyetheretherketone 23153-1 (PEEK) moulding and extrusion (Revision of ISO 685:1975) materials — Part 1: Designa- 2020-01-20 TC 92 Fire safety tion system and basis for specifications ISO/FDIS Reaction to fire tests — Ignit- 11925-2 ability of products subjected to ISO/PRF Plastics — Polyetheretherketone direct impingement of flame — 2020-01-03 23153-2 (PEEK) moulding and extrusion Part 2: Single-flame source test materials — Part 2: Preparation (Revision of ISO 11925-2:2010, of test specimens and determi- ISO 11925-2:2010/Cor 1:2011) nation of properties ISO 29903-1 Comparison of toxic gas data TC 69 Applications of statistical from different tests — Part 1: methods Guidance and requirements ISO/FDIS Control charts — Part 7: Multi- (Revision of ISO 29903:2012) 7870-7 variate control charts TC 94 Personal safety -- Personal 2019-12-27 protective equipment
ISO/FDIS Respiratory protective devices ISO/FDIS Accuracy (trueness and preci- 16972 — Vocabulary and graphical 5725-4 sion) of measurement methods symbols 2020-01-22 and results — Part 4: Basic 2020-01-22 methods for the determination (Revision of ISO 16972:2010) of the trueness of a standard measurement method ISO/PRF TS Respiratory protective devices — (Revision of ISO 5725-4:1994) 16976-7 Human factors — Part 7: Hearing and speech TC 70 Internal combustion (Revision of ISO/TS engines 16976-7:2013) ISO/FDIS Reciprocating internal combus- TC 106 Dentistry 6798-1 tion engines — Measurement of ISO/FDIS Dentistry — Laboratory cutters sound power level using sound 2019-12-30 7787-2 — Part 2: Carbide laboratory pressure — Part 1: Engineering cutters 2020-01-15 method
(Revision of ISO 6798:1995) (Revision of ISO 7787-2:2000) ISO/FDIS Reciprocating internal combus- ISO/FDIS Dentistry — Spoons and bone 6798-2 tion engines — Measurement of 22570 curettes sound power level using sound 2019-12-31 2020-01-09 pressure — Part 2: Survey
method (Revision of ISO 6798:1995) TC 107 Metallic and other inorgan- TC 76 Transfusion, infusion ic coatings and injection, and blood ISO/FDIS Vitreous and porcelain enam- processing equipment for 6370-2 els — Determination of the medical and pharmaceuti- resistance to abrasion — Part 2: 2020-01-14 cal use Loss in mass after sub-surface abrasion ISO 11040- Prefilled syringes — Part 4: (Revision of ISO 6370-2:2011) 4:2015/FDAmd Glass barrels for injectables and 1 sterilized subassembled syringes 2020-01-24 ISO/FDIS Vitreous and porcelain enamels ready for filling — Amendment 1 8289-1 — Low-voltage test for detect- ing and locating defects — Part 2020-01-10 TC 85 Nuclear energy, nuclear 1: Swab test for non-profiled technologies, and radio- surfaces logical protection (Revision of ISO 8289:2000) TC 110 Industrial trucks
10 ISO Update, Supplement to ISO Focus -- December 2019 ISO 3691- Industrial trucks — Safety ISO/PRF TS Earth-moving machinery and 5:2014/PRF requirements and verification 15143-3 mobile road construction Amd 1 — Part 5: Pedestrian-propelled machinery — Worksite data trucks — Amendment 1 exchange — Part 3: Telematics data TC 112 Vacuum technology (Revision of ISO/TS ISO/FDIS 2861 Vacuum technology — Dimen- 15143-3:2016) sions of clamped-type quick- release couplings 2020-01-09 TC 130 Graphic technology ISO/PRF Graphic technology — Prepress (Revision of ISO 2861:2013) 12641-2 digital data exchange — Part 2: Advanced colour targets for ISO/FDIS 3669 Vacuum technology — Bakeable input scanner calibration flanges — Dimensions of knife- edge flanges 2019-12-30 (Revision of ISO 12641:1997) ISO/FDIS Graphic technology — Guide- (Revision of ISO 3669:2017) 19301 lines for schema writers — Template for colour quality 2020-01-20 TC 114 Horology management ISO/FDIS Timekeeping instruments — ISO/PRF TS Image technology colour man- 18684 Watch external parts made of 23564 agement — Evaluating colour hard material — General require- 2020-01-08 transform accuracy in ICC ments and test methods profiles (Revision of ISO/TS 18684:2015) ISO/FDIS 764 Horology — Magnetic resistant TC 138 Plastics pipes, fittings and watches valves for the transport of 2020-01-09 fluids ISO Plastics pipes and fittings — (Revision of ISO 764:2002) 21307:2017/ Butt fusion jointing procedures TC 121 Anaesthetic and respiratory PRF Amd 1 for polyethylene (PE) piping equipment systems — Amendment 1 ISO/PRF TS Non-invasive sphygmomanom- TC 145 Graphical symbols 81060-5 eters — Part 5: Requirement for ISO Graphical symbols — Safety the repeatability and reproduc- 7010:2019/ colours and safety signs — Reg- ibility of NIBP simulators for test- FDAmd 1 istered safety signs — Amend- 2019-12-25 ing of automated non-invasive ment 1 sphygmomanometers TC 150 Implants for surgery TC 122 Packaging ISO Cardiovascular implants and ISO/FDIS Transport packages for danger- 15674:2016/ artificial organs — Hard-shell 16106 ous goods — Dangerous goods FDAmd 1 cardiotomy/venous reservoir 2020-01-09 packagings, intermediate bulk 2020-01-07 systems (with/without filter) and containers (IBCs) and large soft venous reservoir bags — packagings — Guidelines for the Amendment 1: Connectors application of ISO 9001 ISO Cardiovascular implants and (Revision of ISO 16106:2006) 15675:2016/ artificial organs — Cardiopulmo- TC 123 Plain bearings FDAmd 1 nary bypass systems — Arterial 2020-01-09 ISO/FDIS Plain bearings — Hydrodynamic blood line filters — Amendment 12130-2 plain tilting pad thrust bearings 1: Connectors under steady-state conditions — 2020-01-15 ISO 14243- Implants for surgery — Wear Part 2: Functions for calculation 1:2009/PRF of total knee-joint prostheses of tilting pad thrust bearings Amd 1 — Part 1: Loading and displace- (Revision of ISO 12130-2:2013) ment parameters for wear-test- ing machines with load control ISO/FDIS Plain bearings — Hydrodynamic and corresponding environmen- 12130-3 plain tilting pad thrust bearings tal conditions for test — Amend- under steady-state conditions 2020-01-15 ment 1 — Part 3: Guide values for the calculation of tilting pad thrust ISO 14243- Implants for surgery — Wear bearings 3:2014/PRF of total knee-joint prostheses (Revision of ISO 12130-3:2001) Amd 1 — Part 3: Loading and displace- ment parameters for wear- TC 126 Tobacco and tobacco testing machines with displace- products ment control and corresponding ISO/PRF Tobacco and tobacco products environmental conditions for test 13276 — Determination of nicotine — Amendment 1 purity — Gravimetric method TC 156 Corrosion of metals and using tungstosilicic acid alloys (Revision of ISO 13276:2017) ISO/FDIS Assessment of the effectiveness TC 127 Earth-moving machinery 22426 of cathodic protection based on ISO/FDIS 7096 Earth-moving machinery — coupon measurements 2020-01-10 Laboratory evaluation of opera- tor seat vibration 2020-01-09 TC 172 Optics and photonics
(Revision of ISO 7096:2000) ISO/PRF Optics and photonics — Optical 9336-3 transfer function — Application — Part 3: Telescopes
ISO Update, Supplement to ISO Focus -- December 2019 11 (Revision of ISO 9336-3:1994) ISO/PRF Fine ceramics (advanced ceram- ISO/PRF Ophthalmic instruments — 23114 ics, advanced technical ceram- 15004-1 Fundamental requirements and ics) — Test method for determin- test methods — Part 1: General ing bonding strength of ceramic requirements applicable to all coatings ophthalmic instruments ISO/FDIS Fine ceramics (advanced ceram- (Revision of ISO 15004-1:2006) 23242 ics, advanced technical ceram- TC 174 Jewellery and precious ics) — Test method for flexural 2019-12-31 metals strength of monolithic ceramic thin plates at room temperature ISO/PRF Jewellery and precious met- by three-point or four-point 15096 als — Determination of 999 0/00 bending silver — Difference method using ICP-OES TC 211 Geographic information/ (Revision of ISO 15096:2014) Geomatics ISO/PRF Jewellery and precious metals ISO/FDIS Addressing — Part 3: Address 22764 — Fineness of solders used with 19160-3 data quality precious metal jewellery alloys 2020-01-13
TC 182 Geotechnics ISO/PRF Geographic information — ISO 18674- Geotechnical investigation 19161-1 Geodetic references — Part 1: 3:2017/PRF and testing — Geotechnical International terrestrial reference Amd 1 monitoring by field instrumenta- system (ITRS) tion — Part 3: Measurement of displacements across a line: TC 212 Clinical laboratory testing Inclinometers — Amendment 1 and in vitro diagnostic test TC 188 Small craft systems ISO/FDIS Small craft — Ventilation of ISO/FDIS Medical laboratories — Require- 11105 petrol engine and/or petrol tank 15190 ments for safety compartments 2020-01-13 2019-12-30
(Revision of ISO 11105:1997) (Revision of ISO 15190:2003) ISO/FDIS Small craft — Hull construction ISO/FDIS In vitro diagnostic medical de- 12215-10 and scantlings — Part 10: Rig 17511 vices — Requirements for estab- loads and rig attachment in sail- 2020-01-21 lishing metrological traceability 2020-01-03 ing craft of values assigned to calibrators, trueness control materials and TC 201 Surface chemical analysis human samples ISO/PRF Surface chemical analysis — (Revision of ISO 17511:2003) 21222 Scanning probe microscopy — ISO/FDIS Medical laboratories — Applica- Procedure for the determination 22367 tion of risk management to medi- of elastic moduli for compliant cal laboratories 2020-01-06 materials using atomic force microscope and the two-point (Revision of ISO/TS 22367:2008, JKR method ISO/TS 22367:2008/Cor 1:2009) TC 204 Intelligent transport TC 213 Dimensional and geometri- systems cal product specifications ISO/PRF Intelligent transport systems — and verification 14813-5 Reference model architecture(s) ISO/FDIS Geometrical product speci- for the ITS sector — Part 5: 21204 fications (GPS) — Transition Requirements for architecture specification 2020-01-15 description in ITS standards (Revision of ISO 14813-5:2010) TC 215 Health informatics ISO/PRF TS Intelligent transport systems — 19082 Definition of data elements and ISO/IEEE FDIS Health informatics — Device data frames between roadside 11073-10201 interoperability — Part 10201: modules and signal controllers Point-of-care medical device 2020-04-01 for cooperative signal control communication — Domain infor- mation model ISO/PRF Intelligent transport systems — (Revision of ISO/IEEE 19414 Service architecture of probe 11073-10201:2004) vehicle systems ISO/PRF TS Information model of Chinese TC 206 Fine ceramics 21831 materia medica processing ISO/PRF Fine ceramics (advanced ceram- 22551 ics, advanced technical ceram- ISO/PRF TS Health Informatics — Categorial ics) — Determination of bacterial 23303 structure for Chinese materia reduction rate by semiconduct- medica products manufacturing ing photocatalytic materials process under indoor lighting environ- ment — Semi-dry method for TC 226 Materials for the produc- estimating antibacterial activity tion of primary aluminium on the actual environmental bac- teria contamination surface
12 ISO Update, Supplement to ISO Focus -- December 2019 ISO/FDIS Carbonaceous products for ISO/FDIS Security and resilience — Com- 14420 the production of aluminium 22392 munity resilience — Guidelines — Baked anodes and shaped 2020-01-20 for conducting peer reviews 2020-01-17 carbon products — Determina- tion of the coefficient of linear ISO/FDIS Security and resilience — Com- thermal expansion 22396 munity resilience — Guidelines (Revision of ISO 14420:2005) for information exchange be- 2020-01-10 TC 238 Solid biofuels tween organizations ISO/FDIS Solid biofuels — Safe handling TMBG Technical Management 20024 and storage of solid biofuel pel- Board - groups lets in commercial and industrial 2020-01-08 IWA 33-1 Technical guidelines for the de- applications velopment of small hydropower ISO/FDIS Solid biofuels — Simplified plants — Part 1: Vocabulary 21945 sampling method for small scale IWA 33-2 Technical guidelines for the de- applications 2019-12-27 velopment of small hydropower
plants — Part 2: Site selection TC 249 Traditional Chinese planning medicine JTC 1 Information technology ISO/FDIS Traditional Chinese medicine — ISO/IEC PRF Information technology — IT 22894 Pulse waveform format 19770-8 asset management — Part 8: 2020-01-21 Guidelines for mapping of indus- try practices to/from the ISO/IEC TC 261 Additive manufacturing 19770 family of standards ISO/ASTM Specification for additive ISO/IEC PRF Systems and software engineer- FDIS 52915 manufacturing file format (AMF) TR 29110-3-1 ing — Lifecycle profiles for Very Version 1.2 2020-02-17 Small Entities (VSEs) — Part 3-1: Process assessment guidelines (Revision of ISO/ASTM (Revision of ISO/IEC TR 52915:2016) 29110-3-1:2015) TC 264 Fireworks ISO/IEC PRF Information technology — Mul- 15938-6 timedia content description ISO/FDIS Fireworks — Test methods interface — Part 6: Reference 22863-1 for determination of specific software chemical substances — Part 1: 2020-01-07 (Revision of ISO/IEC 15938- General 6:2003/Amd 1:2006/Cor 1:2007, ISO/FDIS Fireworks — Test methods ISO/IEC 15938-6:2003, ISO/IEC 22863-2 for determination of specific 15938-6:2003/Amd 1:2006, ISO/ chemical substances — Part 2020-01-08 IEC 15938-6:2003/Amd 2:2007, 2: Hexachlorobenzene by gas ISO/IEC 15938-6:2003/Amd chromatography 3:2010, ISO/IEC 15938-6:2003/ Amd 4:2011) TC 268 Sustainable cities and communities ISO/IEC FDIS Information technology — JPEG 21122-4 XS low-latency lightweight image ISO/FDIS Smart community infrastructures coding system — Part 4: Con- 2020-01-20 37156 — Guidelines on data exchange formance testing and sharing for smart community 2020-01-03 infrastructures ISO/IEC FDIS Information technology — MPEG 23003-3 audio technologies — Part 3: ISO/FDIS Smart community infrastructures Unified speech and audio coding 2020-01-05 37161 — Guidance on smart trans- portation for energy saving in 2020-01-17 (Revision of ISO/IEC 23003- transportation services 3:2012, ISO/IEC 23003-3:2012/ ISO/FDIS Smart community infrastructures Cor 1:2012, ISO/IEC 23003- 37162 — Smart transportation for newly 3:2012/Amd 2:2015, ISO/IEC developing areas 2020-01-15 23003-3:2012/Cor 2:2013, ISO/ IEC 23003-3:2012/Cor 3:2015, ISO/IEC 23003-3:2012/Amd TC 276 Biotechnology 3:2016, ISO/IEC 23003-3:2012/ ISO/FDIS Biotechnology — Nucleic acid Amd 1:2014, ISO/IEC 23003- 20688-1 synthesis — Part 1: Require- 3:2012/Amd 1:2014/Cor 1:2015, ments for the production and 2020-01-07 ISO/IEC 23003-3:2012/Cor quality control of synthesized 4:2015, ISO/IEC 23003-3:2012/ oligonucleotides Amd 2:2015/Cor 1:2015) TC 279 Innovation management ISO/IEC PRF Information technology — MPEG 23003-5 audio technologies — Part 5: ISO/FDIS Innovation management — Fun- Uncompressed audio in MPEG-4 56000 damentals and vocabulary file format 2020-01-09 ISO/IEC Information technology — Dy- 23009-5:2017/ namic adaptive streaming over TC 292 Security and resilience FDAmd 1 HTTP (DASH) — Part 5: Server 2020-01-24 ISO/FDIS Security and resilience — Busi- and network assisted DASH 22313 ness continuity management (SAND) — Amendment 1: Im- systems — Guidance on the use 2020-01-17 provements on SAND messages of ISO 22301 (Revision of ISO 22313:2012)
ISO Update, Supplement to ISO Focus -- December 2019 13 ISO/IEC FDIS Information technology — Inter- ISO en Ships and marine technology — 23093-1 net of media things — Part 1: 11674:2019 Heading control systems Architecture 2020-01-20 F
ISO/IEC FDIS Information technology — JPEG TC 10 Technical product 29199-2 XR image coding system — Part documentation 2: Image coding specification 2020-01-16 ISO en Fluid draughting media — Part 2: (Revision of ISO/IEC 29199- 9957-2:2019 Water-based non-India ink — Re- 2:2012, ISO/IEC 29199-2:2012/ quirements and test conditions B Amd 1:2017) ISO/IEC PRF Digital publishing — EPUB3 TC 17 Steel TS 22424-1 preservation — Part 1: Principles ISO en Switch and crossing rails 22055:2019 fr ISO/IEC PRF Digital publishing — EPUB3 D TS 22424-2 preservation — Part 2: Metadata requirements TC 20 Aircraft and space vehicles ISO/IEC FDIS Information technology — User ISO en Unmanned aircraft systems — Part 3: 17549-2 interface guidelines on menu 21384-3:2019 Operational procedures navigation — Part 2: Navigation 2020-01-07 C with 4-direction devices (Revision of ISO/IEC 17549-2:2015) TC 22 Road vehicles ISO/IEC FDIS Information technology — ISO fr Road vehicles — Vehicle to grid 24779-5 Cross-jurisdictional and societal 15118-1:2019 communication interface — Part 1: aspects of implementation of 2020-01-20 General information and use-case H biometric technologies — Pic- definition tograms, icons and symbols for ISO/TR en Road vehicles — Solutions for re- use with biometric systems — 23786:2019 mote access to vehicle — Criteria for Part 5: Face applications risk assessment B ISO/IEC PRF Information technology — Cloud 22624 computing — Taxonomy based ISO en Road vehicles — Test methods and data handling for cloud services 20076:2019 performance requirements for voltage ISO/IEC PRF Information technology — Cloud class B connectors G TS 23167 computing — Common tech- nologies and techniques ISO en Road Vehicles — Aerosol separator ISO/IEC PRF Information technology — Cloud 17536-4:2019 performance test for internal com- TR 23188 computing — Edge computing bustion engines — Part 4: Laboratory D landscape fractional efficiency test method ISO/IEC FDIS Information technology — Gov- ISO 22241- en Diesel engines — NOx reduction 38506 ernance of IT — Application of 1:2019/Amd agent AUS 32 — Part 1: Quality ISO/IEC 38500 to the govern- 2019-12-30 1:2019 requirements — Amendment 1 XZ ance of IT enabled investments ISO en Road vehicles — Ergonomics as- 21956:2019 pects of transport information and control systems — Human machine B interface specifications for keyless ignition systems TC 23 Tractors and machinery for agriculture and forestry ISO en Agricultural engineering — Electrical Standards published 15003:2019 and electronic equipment — Test- ing resistance to environmental D conditions New International Standards published between 01 November and TC 24 Particle characterization in- 01 December 2019 cluding sieving ISO en Particulate materials — Sampling and 1 delayed publication of language version 14488:2007/ sample splitting for the determination 2 corrected version Amd 1:2019 of particulate properties — Amend- XZ 3 multilingual document ment 1 ISO en Determination of particle size distri- 21501-2:2019 bution — Single particle light interac- Price tion methods — Part 2: Light scatter- D group ing liquid-borne particle counter
ISO en Determination of particle size distri- TC 6 Paper, board and pulps 21501-3:2019 bution — Single particle light interac- tion methods — Part 3: Light extinc- C ISO 536:2019 en Paper and board — Determination of tion liquid-borne particle counter grammage B TC 28 Petroleum and related prod- ucts, fuels and lubricants from TC 8 Ships and marine technology natural or synthetic sources
14 ISO Update, Supplement to ISO Focus -- December 2019 ISO/PAS fr Petroleum products — Fuels (class ISO en Textiles — Quantitative chemical 23263:2019 F) — Considerations for fuel suppliers 1833-15:2019 fr analysis — Part 15: Mixtures of jute and users regarding marine fuel qual- B with certain animal fibres (method by A ity in view of the implementation of determining nitrogen content) maximum 0,50 % sulfur in 2020 ISO en Textiles — Bursting properties of ISO en Fatty acid methyl esters (FAME) — 13938-1:2019 fr fabrics — Part 1: Hydraulic method 20424:2019 fr Determination of sulfur content — for determination of bursting strength A Inductively coupled plasma optical B and bursting distension emission spectrometry (ICP-OES) ISO en Textiles — Bursting properties of method 13938-2:2019 fr fabrics — Part 2: Pneumatic method TC 29 Small tools for determination of bursting strength A and bursting distension ISO en Tools for moulding — Components 12165:2019 fr of compression and injection moulds TC 39 Machine tools and diecasting dies — List of equiva- E ISO en Machine tools safety — Presses lent terms and symbols 16092-4:2019 fr — Part 4: Safety requirements for TC 30 Measurement of fluid flow in pneumatic presses E closed conduits ISO fr Measurement of fluid flow by means TC 43 Acoustics 5167-6:2019 of pressure differential devices insert- ISO en Acoustics — Reference zero for the ed in circular cross-section conduits C 389-7:2019 fr calibration of audiometric equipment running full — Part 6: Wedge meters — Part 7: Reference threshold of B ISO fr Measurement of fluid flow in closed hearing under free-field and diffuse- 20456:2017 conduits — Guidance for the use field listening conditions of electromagnetic flowmeters for E ISO en Acoustics — Characterization of conductive liquids 20270:2019 sources of structure-borne sound TC 31 Tyres, rims and valves and vibration — Indirect measure- F ment of blocked forces ISO 9413:2019 en Tyre valves — Dimensions and designation ISO fr Underwater acoustics — Quantities H 17208-2:2019 and procedures for description and measurement of underwater sound C from ships — Part 2: Determination TC 34 Food products of source levels from deep water ISO en Guidelines for the harvesting, measurements 21983:2019 transportation, separation of stigma, TC 44 Welding and allied processes drying and storage of saffron before A packing ISO/TR en Brazing — Grouping systems for 24471:2019 materials — American materials ISO en Microbiology of the food chain — E 16140-6:2019 fr Method validation — Part 6: Protocol for the validation of alternative (pro- D prietary) methods for microbiological ISO fr Brazing for aerospace applications confirmation and typing procedures 11745:2010 — Qualification test for brazers and brazing operators — Brazing of me- C ISO en Microbiology of the food chain — Es- tallic components 19036:2019 fr timation of measurement uncertainty for quantitative determinations F ISO fr Welding for aerospace applications 16338:2017 — Resistance spot and seam welding F TC 35 Paints and varnishes ISO en Paints and varnishes — Determina- TC 45 Rubber and rubber products 3233-1:2019 tion of percentage volume of non- volatile matter — Part 1: Method us- C ISO en Rubber, vulcanized or thermoplas- ing a coated test panel to determine 815-1:2019 fr tic — Determination of compression non-volatile matter and to determine set — Part 1: At ambient or elevated C dry-film density by the Archimedes' temperatures principle ISO en Rubber, vulcanized or thermoplastic ISO en Paints and varnishes — Determina- 815-2:2019 fr — Determination of compression set 6504-3:2019 fr tion of hiding power — Part 3: Deter- — Part 2: At low temperatures D mination of hiding power of paints for D masonry, concrete and interior use ISO en Rubber — Determination of metal ISO en Paints and varnishes — Determina- 6101-1:2019 content by atomic absorption spec- 15091:2019 fr tion of electrical conductivity and trometry — Part 1: Determination of B resistance B zinc content ISO en Rubber — Determination of metal TC 37 Language and terminology 6101-2:2019 content by atomic absorption spec- trometry — Part 2: Determination of B ISO en Management of terminology resourc- lead content 26162-1:2019 es — Terminology databases — Part 1: Design D ISO 2440:2019 en Flexible and rigid cellular polymeric fr materials — Accelerated ageing tests A ISO en Management of terminology resourc- 26162-2:2019 es — Terminology databases — Part 2: Software B TC 58 Gas cylinders
TC 38 Textiles
ISO Update, Supplement to ISO Focus -- December 2019 15 ISO en Gas cylinders — Valve protection ISO en Aggregates for concrete — Test 11117:2019 fr caps and guards — Design, con- 20290-3:2019 methods for mechanical and physical struction and tests C properties — Part 3: Determination of B aggregate crushing value (ACV) ISO en Gas cylinders — Cylinder bundles ISO en Aggregates for concrete — Test 10961:2019 fr — Design, manufacture, testing and 20290-4:2019 methods for mechanical and physical inspection D properties — Part 4: Determination of B ten percent fines value (TFV) TC 60 Gears TC 79 Light metals and their alloys ISO en Calculation of load capacity of spur ISO 2106:2019 en Anodizing of aluminium and its al- 6336-1:2019 fr and helical gears — Part 1: Basic fr loys — Determination of mass per principles, introduction and general H unit area (surface density) of anodic B influence factors oxidation coatings — Gravimetric method ISO en Calculation of load capacity of spur 6336-2:2019 fr and helical gears — Part 2: Calcula- TC 84 Devices for administration tion of surface durability (pitting) F of medicinal products and catheters ISO en Calculation of load capacity of spur ISO 10555- fr Intravascular catheters — Sterile 6336-3:2019 fr and helical gears — Part 3: Calcula- 6:2015/Amd and single-use catheters — Part 6: tion of tooth bending strength G 1:2019 Subcutaneous implanted ports — XZ Amendment 1 ISO en Calculation of load capacity of spur ISO en Sharps injury protection — Require- 6336-6:2019 fr and helical gears — Part 6: Calcula- 23907-2:2019 ments and test methods — Part 2: tion of service life under variable load F Reusable sharps containers C
TC 61 Plastics TC 85 Nuclear energy, nuclear ISO 180:2019 en Plastics — Determination of Izod technologies, and radiological fr impact strength protection C ISO en Radiological protection — Monitoring
16638-2:2019 fr and internal dosimetry for specific ISO en Plastics — Polyoxymethylene (POM) materials — Part 2: Ingestion of ura- E 29988-1:2019 fr moulding and extrusion materials — nium compounds Part 1: Designation system and basis B ISO en Measurement of radioactivity in the for specifications 18589-1:2019 environment — Soil — Part 1: Gen- TC 67 Materials, equipment and off- eral guidelines and definitions C shore structures for petroleum, petrochemical and natural gas TC 87 Cork industries ISO 2067:2019 fr Granulated cork, broken cork and ISO fr Petroleum and natural gas industry crushed cork — Sampling for the 19345-1:2019 — Pipeline transportation systems determination of moisture content A — Pipeline integrity management H specification — Part 1: Full-life cycle integrity management for onshore TC 94 Personal safety -- Personal pipeline protective equipment ISO fr Petroleum and natural gas industries ISO en Protective clothing for users of 35106:2017 — Arctic operations — Metocean, 11393-6:2018 fr hand-held chainsaws — Part 6: ice, and seabed data H Performance requirements and test D methods for upper body protectors TC 69 Applications of statistical ISO en Wildland firefighting personal protec- methods 16073-2:2019 tive equipment — Requirements and test methods — Part 2: Compatibility A ISO en Control charts — Part 1: General 7870-1:2019 fr guidelines D ISO en Wildland firefighting personal protec- 16073-7:2019 tive equipment — Requirements and test methods — Part 7: Face and eye D TC 71 Concrete, reinforced concrete protection and pre-stressed concrete ISO en Station uniform for firefighters ISO en Testing of concrete — Part 3: Making 21942:2019 1920-3:2019 and curing test specimens B D
TC 110 Industrial trucks ISO en Testing of concrete — Part 14: Set- ISO Industrial trucks — Vocabulary — 1920-14:2019 ting time of concrete mixtures by 5053-2:2019 Part 2: Fork arms and attachments resistance to penetration A A
ISO en Aggregates for concrete — Test 20290-2:2019 methods for mechanical and physical TC 113 Hydrometry properties — Part 2: Method for de- A ISO 8368:2019 en Hydrometric determinations — Flow termination of resistance to fragmen- measurements in open channels tation by Los Angeles Test (LA-Test) using structures — Guidelines for D selection of structure
16 ISO Update, Supplement to ISO Focus -- December 2019 TC 117 Fans ISO en Performance of buildings — Building 21105-1:2019 enclosure thermal performance verifi- ISO en Fans — Efficiency classification for cation and commissioning — Part 1: E 12759-4:2019 fr fans — Part 4: Driven fans at maxi- General requirements mum operating speed D TC 164 Mechanical testing of metals TC 118 Compressors and pneumatic ISO en Metallic materials — Tensile testing tools, machines and equipment 6892-1:2019 fr — Part 1: Method of test at room temperature G ISO en Hand-held portable power tools — 28927-1:2019 fr Test methods for evaluation of vibra- tion emission — Part 1: Angle and E TC 172 Optics and photonics vertical grinders ISO en Optics and photonics — Preparation TC 121 Anaesthetic and respiratory 10110-8:2019 fr of drawings for optical elements and equipment systems — Part 8: Surface texture D
ISO en Medical supply units 11197:2019 fr ISO en Optics and photonics — Prepara- F 10110-12:2019 fr tion of drawings for optical elements and systems — Part 12: Aspheric D surfaces TC 122 Packaging ISO/TR fr Ophthalmic optics — Review of the ISO 4180:2019 en Packaging — Complete, filled trans- 21958:2019 test methods used to assess scratch fr port packages — General rules for and abrasion resistance of spectacle D the compilation of performance test D lenses schedules ISO en Optics and photonics — Lasers TC 123 Plain bearings 11551:2019 fr and laser-related equipment — Test ISO en Plain bearings — Hydrostatic plain method for absorptance of optical C 12168-1:2019 journal bearings without drain- laser components age grooves under steady-state E TC 178 Lifts, escalators and moving conditions — Part 1: Calculation of walks oil-lubricated plain journal bearings without drainage grooves ISO en Lifts for the transport of persons and 8100-30:2019 fr goods — Part 30: Class I, II, III and VI ISO en Plain bearings — Hydrostatic plain lifts installation E 12168-2:2019 journal bearings without drainage grooves under steady-state condi- C tions — Part 2: Characteristic values TC 184 Automation systems and for the calculation of oil-lubricated integration plain journal bearings without drain- ISO en Automation systems and integration age grooves 21919-1:2019 — Interfaces for automated machine TC 127 Earth-moving machinery tending — Part 1: Overview and C fundamental principles ISO 5010:2019 en Earth-moving machinery — Wheeled fr machines — Steering requirements ISO en Industrial automation systems and C 10303-41:2019 integration — Product data rep- resentation and exchange — Part B 41: Integrated generic resource: TC 131 Fluid power systems Fundamentals of product description ISO 4411:2019 en Hydraulic fluid power — Valves — and support fr Determination of differential pressure/ ISO en Industrial automation systems and flow rate characteristics B 10303-42:2019 integration — Product data represen- tation and exchange — Part 42: Inte- B ISO fr Pneumatic fluid power — Determi- grated generic resource: Geometric 6358-2:2019 nation of flow-rate characteristics and topological representation of components using compress- F ISO en Industrial automation systems and ible fluids — Part 2: Alternative test 10303-44:2019 integration — Product data repre- methods sentation and exchange — Part 44: B TC 147 Water quality Integrated generic resource: Product structure configuration ISO en Water quality — Technetium-99 — 22125-1:2019 fr Part 1: Test method using liquid ISO en Industrial automation systems and scintillation counting D 10303-45:2019 integration — Product data repre- sentation and exchange — Part 45: B Integrated generic resource: Material ISO en Water quality — Technetium-99 — and other engineering properties 22125-2:2019 fr Part 2: Test method using inductively coupled plasma mass spectrometry D ISO en Industrial automation systems and (ICP-MS) 10303-46:2019 integration — Product data repre- sentation and exchange — Part 46: B ISO en Water quality — Detection and enu- Integrated generic resource: Visual 17995:2019 meration of thermotolerant Campylo- presentation bacter spp D ISO en Industrial automation systems and 10303-47:2019 integration — Product data repre- TC 163 Thermal performance and sentation and exchange — Part 47: B energy use in the built Integrated generic resource: Shape environment variation tolerances
ISO Update, Supplement to ISO Focus -- December 2019 17 ISO en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 10303-56:2019 integration — Product data repre- 1019:2019 integration — Product data represen- sentation and exchange — Part 56: B tation and exchange — Part 1019: B Integrated general resource: State Application module: Product view definition ISO en Industrial automation systems and 10303-61:2019 integration — Product data repre- ISO/TS 10303- en Industrial automation systems and sentation and exchange — Part 61: B 1025:2019 integration — Product data rep- Integrated generic resource: Systems resentation and exchange — Part B engineering representation 1025: Application module: Alias identification ISO 10303- en Industrial automation systems and 101:2019 integration — Product data repre- ISO/TS 10303- en Industrial automation systems and sentation and exchange — Part 101: B 1026:2019 integration — Product data rep- Integrated application resource: resentation and exchange — Part B Draughting 1026: Application module: Assembly structure ISO 10303- en Industrial automation systems and 105:2019 integration — Product data repre- ISO/TS 10303- en Industrial automation systems and sentation and exchange — Part 105: B 1027:2019 integration — Product data represen- Integrated application resource: tation and exchange — Part 1027: B Kinematics Application module: Contextual shape positioning ISO 10303- en Industrial automation systems and 107:2019 integration — Product data repre- ISO/TS 10303- en Industrial automation systems and sentation and exchange — Part 107: B 1030:2019 integration — Product data rep- Integrated application resource: resentation and exchange — Part B Finite element analysis definition 1030: Application module: Property relationships assignment ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 410:2019 integration — Product data repre- 1032:2019 integration — Product data represen- sentation and exchange — Part 410: B tation and exchange — Part 1032: B Application module: AP210 electronic Application module: Shape property assembly interconnect and packag- assignment ing design ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1043:2019 integration — Product data represen- 442:2019 integration — Product data repre- tation and exchange — Part 1043: B sentation and exchange — Part 442: B Application module: Work order Application module: AP242 managed ISO/TS 10303- en Industrial automation systems and model based 3D engineering 1050:2019 integration — Product data rep- ISO 10303- en Industrial automation systems and resentation and exchange — Part B 515:2019 integration — Product data repre- 1050: Application module: Dimension sentation and exchange — Part 515: B tolerance Application interpreted construct: ISO/TS 10303- en Industrial automation systems and Constructive solid geometry 1051:2019 integration — Product data rep- ISO 10303- en Industrial automation systems and resentation and exchange — Part B 517:2019 integration — Product data repre- 1051: Application module: Geometric sentation and exchange — Part 517: B tolerance Application interpreted construct: ISO/TS 10303- en Industrial automation systems and Mechanical design geometric 1054:2019 integration — Product data represen- presentation tation and exchange — Part 1054: B ISO/TS 10303- en Industrial automation systems and Application module: Value with unit 1001:2019 integration — Product data represen- ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1001: B 1055:2019 integration — Product data represen- Application module: Appearance tation and exchange — Part 1055: B assignment Application module: Part definition ISO/TS 10303- en Industrial automation systems and relationship 1003:2019 integration — Product data rep- ISO/TS 10303- en Industrial automation systems and resentation and exchange — Part B 1058:2019 integration — Product data represen- 1003: Application module: Curve tation and exchange — Part 1058: B appearance Application module: Configuration ISO/TS 10303- en Industrial automation systems and effectivity 1004:2019 integration — Product data rep- ISO/TS 10303- en Industrial automation systems and resentation and exchange — Part B 1091:2019 integration — Product data represen- 1004: Application module: Elemental tation and exchange — Part 1091: B geometric shape Application module: Maths space ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1005:2019 integration — Product data rep- 1092:2019 integration — Product data represen- resentation and exchange — Part B tation and exchange — Part 1092: B 1005: Application module: Elemental Application module: Maths value topology ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1103:2019 integration — Product data represen- 1006:2019 integration — Product data represen- tation and exchange — Part 1103: B tation and exchange — Part 1006: B Application module: Product class Application module: Foundation representation
18 ISO Update, Supplement to ISO Focus -- December 2019 ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1104:2019 integration — Product data rep- 1251:2019 integration — Product data represen- resentation and exchange — Part B tation and exchange — Part 1251: B 1104: Application module: Specified Application module: Interface product ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1253:2019 integration — Product data represen- 1105:2019 integration — Product data represen- tation and exchange — Part 1253: B tation and exchange — Part 1105: B Application module: Condition Application module: Multi linguism ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1256:2019 integration — Product data represen- 1109:2019 integration — Product data rep- tation and exchange — Part 1256: B resentation and exchange — Part B Application module: State observed 1109: Application module: Alternative ISO/TS 10303- en Industrial automation systems and solution 1259:2019 integration — Product data rep- ISO/TS 10303- en Industrial automation systems and resentation and exchange — Part B 1110:2019 integration — Product data rep- 1259: Application module: Activity as resentation and exchange — Part B realized 1110: Application module: Surface ISO/TS 10303- en Industrial automation systems and conditions 1290:2019 integration — Product data rep- ISO/TS 10303- en Industrial automation systems and resentation and exchange — Part B 1111:2019 integration — Product data represen- 1290: Application module: Document tation and exchange — Part 1111: B management Application module: Classification ISO/TS 10303- en Industrial automation systems and with attributes 1311:2019 integration — Product data represen- ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1311: B 1112:2019 integration — Product data represen- Application module: Associative tation and exchange — Part 1112: B draughting elements Application module: Specification ISO/TS 10303- en Industrial automation systems and control 1321:2019 integration — Product data represen- ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1321: B 1114:2019 integration — Product data represen- Application module: Swept solid tation and exchange — Part 1114: B ISO/TS 10303- en Industrial automation systems and Application module: Classification 1348:2019 integration — Product data represen- assignment tation and exchange — Part 1348: B ISO/TS 10303- en Industrial automation systems and Application module: Requirement 1118:2019 integration — Product data rep- management resentation and exchange — Part B ISO/TS 10303- en Industrial automation systems and 1118: Application module: Measure 1349:2019 integration — Product data represen- representation tation and exchange — Part 1349: B ISO/TS 10303- en Industrial automation systems and Application module: Incomplete data 1126:2019 integration — Product data rep- reference mechanism resentation and exchange — Part B ISO/TS 10303- en Industrial automation systems and 1126: Application module: Document 1374:2019 integration — Product data represen- properties tation and exchange — Part 1374: B ISO/TS 10303- en Industrial automation systems and Application module: Analysis shape 1127:2019 integration — Product data represen- ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1127: B 1379:2019 integration — Product data represen- Application module: File identification tation and exchange — Part 1379: B ISO/TS 10303- en Industrial automation systems and Application module: Cfd specified 1128:2019 integration — Product data represen- general property tation and exchange — Part 1128: B ISO/TS 10303- en Industrial automation systems and Application module: External item 1383:2019 integration — Product data represen- identification assignment tation and exchange — Part 1383: B ISO/TS 10303- en Industrial automation systems and Application module: Finite elements 1131:2019 integration — Product data represen- ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1131: B 1386:2019 integration — Product data represen- Application module: Construction tation and exchange — Part 1386: B geometry Application module: Mesh topology ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1147:2019 integration — Product data represen- 1397:2019 integration — Product data represen- tation and exchange — Part 1147: B tation and exchange — Part 1397: B Application module: Manufacturing Application module: Conditional configuration effectivity effectivity ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1231:2019 integration — Product data represen- 1402:2019 integration — Product data rep- tation and exchange — Part 1231: B resentation and exchange — Part B Application module: Product data 1402: Application module: Same as management external item ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1241:2019 integration — Product data represen- 1469:2019 integration — Product data represen- tation and exchange — Part 1241: B tation and exchange — Part 1469: B Application module: Information Application module: Foundation state rights definition
ISO Update, Supplement to ISO Focus -- December 2019 19 ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1473:2019 integration — Product data represen- 1733:2019 integration — Product data rep- tation and exchange — Part 1473: B resentation and exchange — Part B Application module: Description 1733: Application module: Planned assignment characteristic ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1523:2019 integration — Product data represen- 1739:2019 integration — Product data represen- tation and exchange — Part 1523: B tation and exchange — Part 1739: B Application module: Shape data Application module: Production rule quality criteria ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1764:2019 integration — Product data represen- 1603:2019 integration — Product data represen- tation and exchange — Part 1764: B tation and exchange — Part 1603: B Application module: Shape feature Application module: Analytical model ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1765:2019 integration — Product data represen- 1628:2019 integration — Product data represen- tation and exchange — Part 1765: B tation and exchange — Part 1628: B Application module: Characterizable Application module: Design product object data management ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1767:2019 integration — Product data represen- 1635:2019 integration — Product data rep- tation and exchange — Part 1767: B resentation and exchange — Part B Application module: Composite 1635: Application module: Assembly constituent shape functional interface requirement ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1770:2019 integration — Product data represen- 1641:2019 integration — Product data rep- tation and exchange — Part 1770: B resentation and exchange — Part B Application module: Part and zone 1641: Application module: Assembly laminate tables module with subassembly ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1782:2019 integration — Product data rep- 1646:2019 integration — Product data rep- resentation and exchange — Part B resentation and exchange — Part B 1782: Application module: Qualified 1646: Application module: Footprint measure definition ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1790:2019 integration — Product data represen- 1647:2019 integration — Product data represen- tation and exchange — Part 1790: B tation and exchange — Part 1647: B Application module: Parameterization Application module: Assembly physi- and variational representation cal interface requirement ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1791:2019 integration — Product data represen- 1649:2019 integration — Product data rep- tation and exchange — Part 1791: B resentation and exchange — Part B Application module: Primitive solids 1649: Application module: Assembly ISO/TS 10303- en Industrial automation systems and technology 1796:2019 integration — Product data represen- ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1796: B 1652:2019 integration — Product data represen- Application module: Kinematic mo- tation and exchange — Part 1652: B tion representation Application module: Basic geometry ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1803:2019 integration — Product data represen- 1656:2019 integration — Product data represen- tation and exchange — Part 1803: B tation and exchange — Part 1656: B Application module: Process plan Application module: Component ISO/TS 10303- en Industrial automation systems and grouping 1804:2019 integration — Product data represen- ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1804: B 1657:2019 integration — Product data represen- Application module: Product as tation and exchange — Part 1657: B individual assembly and test Application module: Component ISO/TS 10303- en Industrial automation systems and feature 1806:2019 integration — Product data represen- ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1806: B 1722:2019 integration — Product data represen- Application module: Form feature in tation and exchange — Part 1722: B panel Application module: Part template ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1807:2019 integration — Product data represen- 1731:2019 integration — Product data represen- tation and exchange — Part 1807: B tation and exchange — Part 1731: B Application module: Part shape Application module: Constructive ISO/TS 10303- en Industrial automation systems and solid geometry 2D 1814:2019 integration — Product data rep- ISO/TS 10303- en Industrial automation systems and resentation and exchange — Part B 1732:2019 integration — Product data represen- 1814: Application module: Machining tation and exchange — Part 1732: B features Application module: Physical unit usage view
20 ISO Update, Supplement to ISO Focus -- December 2019 ISO/TS 10303- en Industrial automation systems and ISO/TS 10303- en Industrial automation systems and 1815:2019 integration — Product data represen- 1844:2019 integration — Product data represen- tation and exchange — Part 1815: B tation and exchange — Part 1844: B Application module: Mating structure Application module: General design connectivity ISO/TS 10303- en Industrial automation systems and 1824:2019 integration — Product data rep- ISO/TS 10303- en Industrial automation systems and resentation and exchange — Part B 1845:2019 integration — Product data represen- 1824: Application module: Change tation and exchange — Part 1845: B management Application module: Wire and cable design connectivity ISO/TS 10303- en Industrial automation systems and 1827:2019 integration — Product data rep- ISO/TS 10303- en Industrial automation systems and resentation and exchange — Part B 1846:2019 integration — Product data represen- 1827: Application module: Extruded tation and exchange — Part 1846: B structure cross section Application module: Mechanical design features and requirements ISO/TS 10303- en Industrial automation systems and 1828:2019 integration — Product data represen- ISO/TS 10303- en Industrial automation systems and tation and exchange — Part 1828: B 4442:2019 integration — Product data represen- Application module: Wiring harness tation and exchange — Part 4442: B assembly design Domain model: Managed model based 3D engineering domain ISO/TS 10303- en Industrial automation systems and 1830:2019 integration — Product data represen- TC 190 Soil quality tation and exchange — Part 1830: B ISO en Soil quality — Leaching proce- Application module: Edge based 21268-4:2019 fr dures for subsequent chemical and topological representation with length ecotoxicological testing of soil and E ISO/TS 10303- en Industrial automation systems and soil-like materials — Part 4: Influence 1831:2019 integration — Product data represen- of pH on leaching with initial acid/ tation and exchange — Part 1831: B base addition Application module: Scan data 3D shape TC 194 Biological and clinical evalua- tion of medical devices ISO/TS 10303- en Industrial automation systems and 1834:2019 integration — Product data represen- ISO en Biological evaluation of medical tation and exchange — Part 1834: B 10993-9:2019 fr devices — Part 9: Framework for Application module: Surface visual identification and quantification of B texture potential degradation products ISO/TS 10303- en Industrial automation systems and ISO en Biological evaluation of medical 1835:2019 integration — Product data represen- 10993-15:2019 fr devices — Part 15: Identification and tation and exchange — Part 1835: B quantification of degradation prod- C Application module: Additive manu- ucts from metals and alloys facturing part and build information TC 197 Hydrogen technologies ISO/TS 10303- en Industrial automation systems and ISO en Hydrogen fuel quality — Product 1836:2019 integration — Product data represen- 14687:2019 specification tation and exchange — Part 1836: B C Application module: Vertex colours for tessellated geometry ISO en Gaseous hydrogen — Fuelling sta- ISO/TS 10303- en Industrial automation systems and 19880-5:2019 tions — Part 5: Dispenser hoses and 1837:2019 integration — Product data represen- hose assemblies E tation and exchange — Part 1837: B Application module: Product data equivalence definition TC 204 Intelligent transport systems ISO/TS 10303- en Industrial automation systems and ISO en Electronic fee collection — Com- 1838:2019 integration — Product data represen- 12813:2019 fr pliance check communication for tation and exchange — Part 1838: B autonomous systems F Application module: Annotated 3D model equivalence criteria TC 205 Building environment design ISO/TS 10303- en Industrial automation systems and ISO en Planning for functional performance 1839:2019 integration — Product data represen- 19455-1:2019 testing for building commissioning tation and exchange — Part 1839: B — Part 1: Secondary hydronic pump, C Application module: Annotated 3D system and associated controls model equivalence inspection result ISO en Open data communication in building ISO/TS 10303- en Industrial automation systems and 22510:2019 automation, controls and building 1840:2019 integration — Product data represen- management — Home and build- H tation and exchange — Part 1840: B ing electronic systems — KNXnet/IP Application module: Annotated 3D communication model equivalence shape TC 206 Fine ceramics ISO/TS 10303- en Industrial automation systems and 1841:2019 integration — Product data represen- ISO en Fine ceramics (advanced ceramics, tation and exchange — Part 1841: B 21822:2019 advanced technical ceramics) — Application module: Annotated 3D Measurement of iso-electric point of B model equivalence assembly ceramic powder TC 207 Environmental management
ISO Update, Supplement to ISO Focus -- December 2019 21 ISO en Environmental management systems ISO/TR fr Nanotechnologies — Health and 14002-1:2019 — Guidelines for using ISO 14001 to 12885:2018 safety practices in occupational address environmental aspects and B settings H conditions within an environmental topic area — Part 1: General TC 249 Traditional Chinese medicine TC 212 Clinical laboratory testing and ISO/TR en Traditional Chinese medicine — in vitro diagnostic test systems 23975:2019 Priority list of single herbal medicines ISO/TS en Guidance for supervisors and opera- for developing standards G 22583:2019 tors of point-of-care testing (POCT) devices E TC 268 Sustainable cities and
communities ISO en Biorisk management for laboratories ISO en Sustainable cities and communities 35001:2019 and other related organisations 37105:2019 — Descriptive framework for cities D and communities G
TC 215 Health informatics TC 269 Railway applications ISO fr Health informatics — Explicit time- ISO en Railway applications — Calculation of 12381:2019 related expressions for healthcare- 20138-2:2019 fr braking performance (stopping, slow- specific problems D ing and stationary braking) — Part 2: E
General algorithms utilizing step by ISO/TS en Health Informatics — Categorial step calculation 22773:2019 structures for the representation of ISO en Railway applications — Recyclability the decocting process in traditional A 21106:2019 fr and recoverability calculation method Chinese medicine for rolling stock C TC 216 Footwear ISO en Footwear — Critical substances TC 282 Water reuse 19577:2019 fr potentially present in footwear and ISO en Industrial wastewater classification footwear components — Determina- B 22447:2019 tion of Nitrosamines D TC 219 Floor coverings ISO en Resilient floor coverings — Homo- TC 295 Audit data services 10581:2019 fr geneous poly(vinyl chloride) floor ISO en Audit data collection covering — Specifications B 21378:2019
H ISO en Laminate floor coverings — Determi- 24337:2019 fr nation of geometrical characteristics B TC 301 Energy management and en- ergy savings TC 220 Cryogenic vessels ISO/TS en Energy saving projects (EnSPs) — 50044:2019 Guidelines for economic and financial ISO en Cryogenic vessels — Cryogenic evaluation F 21014:2019 insulation performance C TMBG Technical Management Board - groups TC 221 Geosynthetics ISO Guide en Guidelines for addressing sustainabil- ISO en Geosynthetics — Index test proce- 82:2019 ity in standards 10722:2019 dure for the evaluation of mechanical D damage under repeated loading — B Damage caused by granular material (laboratory test method) CASCO Committee on conformity assessment ISO en Geotextiles and geotextile-related 13426-1:2019 products — Strength of inter- ISO/IEC TR fr Conformity assessment — Guidelines nal structural junctions — Part 1: B 17032:2019 and examples of a scheme for the Geocells certification of processes E
TC 224 Service activities relating to drinking water supply, waste- JTC 1 Information technology water and stormwater systems ISO/IEC en Information technology — Power ISO fr Service activities relating to drink- 24091:2019 efficiency measurement specification 24536:2019 ing water supply, wastewater and for data center storage G stormwater systems — Stormwater G management — Guidelines for storm- ISO/IEC en Software and systems engineering water management in urban areas 26561:2019 — Methods and tools for product line TC 226 Materials for the production of technical probe F
primary aluminium ISO/IEC en Software and systems engineering ISO en Carbonaceous materials for the 26562:2019 — Methods and tools for product line 14428:2019 production of aluminium — Cold and transition management E tepid ramming pastes — Expansion/ B
shrinkage during baking TC 229 Nanotechnologies
22 ISO Update, Supplement to ISO Focus -- December 2019 ISO/IEC en Information technology — Process TC 18 Zinc and zinc alloys 33020:2019 assessment — Process measurement ISO 714:1975 (reconfirmed) framework for assessment of process F capability ISO 1169:2006 (reconfirmed) ISO/IEC en Personal identification — ISO-com- ISO 3750:2006 (reconfirmed) 18013-4:2019 pliant driving licence — Part 4: Test ISO 3815-1:2005 (reconfirmed) methods H ISO 3815-2:2005 (reconfirmed) ISO/IEC en Information technology — Computer ISO 20081:2005 (reconfirmed) 19774-1:2019 graphics, image processing and envi- TC 20 Aircraft and space vehicles ronmental data representation — Part F 1: Humanoid animation (H-Anim) ISO 11:1987 (reconfirmed) architecture ISO 2964:1985 (reconfirmed) ISO/IEC en Information technology — Computer ISO 5859:2014 19774-2:2019 graphics, image processing and environmental data representation — E ISO 6771:2007 (reconfirmed) Part 2: Humanoid animation (H-Anim) ISO 7314:2002 (reconfirmed) motion data animation ISO 16031-2:2003 (reconfirmed) ISO/IEC en Information technology — Electronic TC 22 Road vehicles 27050-1:2019 discovery — Part 1: Overview and concepts D ISO 7876-5:2004 (reconfirmed) TC 23 Tractors and machinery for agriculture ISO/IEC en Information security — Lightweight and forestry 29192-2:2019 cryptography — Part 2: Block ciphers ISO 9261:2004 (reconfirmed) G TC 28 Petroleum and related products, fuels ISO/IEC en Information technology — Internet of and lubricants from natural or synthetic 23093-3:2019 media things — Part 3: Media data sources formats and APIs H ISO 7278-1:1987 (reconfirmed)
ISO 9029:1990 (reconfirmed) ISO/IEC TS en Information technology — Metadata 11179-30:2019 registries (MDR) — Part 30: Basic ISO 9030:1990 (reconfirmed) attributes of metadata B ISO 9200:1993 (reconfirmed)
ISO 10336:1997 (reconfirmed) ISO/IEC en Information technology — User in- 30113-12:2019 terfaces — Gesture-based interfaces ISO 10337:1997 (reconfirmed) across devices and methods — Part G ISO 11223:2004 (reconfirmed) 12: Multi-point gestures for common TC 31 Tyres, rims and valves system actions ISO 10499-2:1998 (reconfirmed) ISO/IEC TR en Information technology — IT 30105-7:2019 Enabled Services-Business Process TC 34 Food products Outsourcing (ITES-BPO) lifecycle D ISO 5550:2006 (reconfirmed) processes — Part 7: Exemplar for maturity assessment ISO 14377:2002 (reconfirmed) ISO 14637:2004 (reconfirmed) ISO 14673-1:2004 (reconfirmed) ISO 14673-2:2004 (reconfirmed) ISO 14673-3:2004 (reconfirmed) ISO 14891:2002 (reconfirmed) ISO 14892:2002 (reconfirmed) Standards confirmed ISO 15323:2002 (reconfirmed) ISO 15884:2002 (reconfirmed) ISO/TS (reconfirmed) The following International Standards are confimred for a five year 17193:2011 period: ISO/TS (reconfirmed) 6579-2:2012 COPOLCO Committee on consumer policy ISO/TS 13136:2012 ISO/IEC Guide 51:2014 TC 44 Welding and allied processes TC 6 Paper, board and pulps ISO 9455-2:1993 (reconfirmed) ISO 217:2013 TC 45 Rubber and rubber products ISO 5269-1:2005 (reconfirmed) ISO 18064:2014 ISO 5269-2:2004 (reconfirmed) ISO 1307:2006 (reconfirmed) TC 17 Steel TC 58 Gas cylinders ISO 1035-4:1982 (reconfirmed) ISO 3500:2005 (reconfirmed) ISO 7778:2014 ISO 20703:2006 (reconfirmed) ISO 20723:2004 (reconfirmed) TC 59 Buildings and civil engineering works
ISO Update, Supplement to ISO Focus -- December 2019 23 ISO 10591:2005 (reconfirmed) ISO/IEC 27033-4:2014 ISO 11432:2005 (reconfirmed) ISO/IEC TC 67 Materials, equipment and offshore 27036-1:2014 structures for petroleum, petrochemi- cal and natural gas industries ISO/IEC 27038:2014 ISO 10426-5:2004 (reconfirmed) ISO 10427-2:2004 (reconfirmed) ISO 13503-6:2014 TC 86 Refrigeration and air-conditioning ISO 16358-2:2013 ISO 16358-3:2013 TC 91 Surface active agents Standards withdrawn ISO 17293-1:2014 ISO 17293-2:2014 Period from 01 November to 01 December 2019 TC 92 Fire safety ISO 834-10:2014 TC 26 Copper and copper alloys TC 112 Vacuum technology ISO 431:1981 (replaced by ) ISO 3529-3:2014 TC 31 Tyres, rims and valves TC 138 Plastics pipes, fittings and valves for ISO 3324-1:2013 (replaced by ) the transport of fluids ISO 3324-2:2013 (replaced by ) ISO 9393-2:2005 (reconfirmed) TC 34 Food products TC 147 Water quality ISO/TS (replaced by ISO 19036:2019) ISO 13165-2:2014 19036:2006 TC 150 Implants for surgery ISO/TS (replaced by ISO 19036:2019) 19036:2006/Amd ISO 5833:2002 (reconfirmed) 1:2009 ISO 9583:1993 (reconfirmed) TC 37 Language and terminology ISO 15309:2013 ISO 26162:2012 (replaced by ISO 26162-1:2019, ISO ISO 16402:2008 (reconfirmed) 26162-2:2019) ISO 16428:2005 (reconfirmed) TC 71 Concrete, reinforced concrete and pre- TC 168 Prosthetics and orthotics stressed concrete ISO/TS ISO 6274:1982 (replaced by ISO 20290-2:2019, ISO 16955:2016 20290-3:2019) TC 172 Optics and photonics ISO 6782:1982 (replaced by ISO 20290-2:2019, ISO 20290-3:2019) ISO 23584-1:2009 (reconfirmed) ISO 6783:1982 (replaced by ISO 20290-2:2019, ISO ISO 9022-4:2014 20290-3:2019) ISO 9358:1994 (reconfirmed) ISO 7033:1987 (replaced by ISO 20290-3:2019, ISO ISO 17411:2014 20290-2:2019) ISO 10935:2009 (reconfirmed) TC 92 Fire safety ISO 7998:2005 (reconfirmed) ISO 12468-2:2013 (replaced by ) TC 173 Assistive products TC 117 Fans ISO 10542-1:2012 (reconfirmed) ISO 12759:2010 (replaced by ISO 12759-2:2019, ISO 12759- 3:2019, ISO 12759-4:2019) TC 180 Solar energy ISO 12759:2010/ (replaced by ISO 12759-2:2019, ISO 12759- ISO/TR 9901:1990 (reconfirmed) Amd 1:2013 3:2019, ISO 12759-4:2019) TC 215 Health informatics TC 178 Lifts, escalators and moving walks ISO/IEEE ISO 4190-1:2010 (replaced by ISO 8100-30:2019) 11073-10102:2014 TC 184 Automation systems and integration ISO/IEEE 11073-10103:2014 ISO/TS (replaced by ) 10303-1288:2014 ISO 20301:2014 ISO/TS (replaced by ) TC 218 Timber 10303-1362:2018 ISO 1030:1975 (reconfirmed) TC 190 Soil quality JTC 1 Information technology ISO/TS (replaced by ISO 21268-4:2019) ISO/IEC (reconfirmed) 21268-4:2007 14888-1:2008 TC 197 Hydrogen technologies ISO/IEC (reconfirmed) ISO 14687-1:1999 (replaced by ISO 14687:2019) 14888-2:2008 ISO 14687-2:2012 (replaced by ISO 14687:2019)
24 ISO Update, Supplement to ISO Focus -- December 2019 ISO 14687-3:2014 (replaced by ISO 14687:2019) JTC 1 Information technology ISO/IEC (replaced by ISO/IEC 19774-1:2019, ISO/IEC 19774:2006 19774-2:2019)
Meeting calendar
The meeting calendar is available at https://www.iso.org/meeting-calendar.html
ISO Update, Supplement to ISO Focus -- December 2019 25