DOCSLIB.ORG

Uued Eesti Standardid Standardikavandite Arvamusküsitlus Asendatud Või Tühistatud Eesti Standardid Algupäraste Standardite K

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Uued Eesti Standardid Standardikavandite Arvamusküsitlus Asendatud Või Tühistatud Eesti Standardid Algupäraste Standardite K 03/2013 Ilmub üks kord kuus alates 1993. aastast Uued Eesti standardid Standardikavandite arvamusküsitlus Asendatud või tühistatud Eesti standardid Algupäraste standardite koostamine ja ülevaatus Standardite tõlked kommenteerimisel Uued harmoneeritud standardid Standardipealkirjade muutmine Uued eestikeelsed standardid ISSN 1406-0698 Avaldatud 05.03.2013 SISUKORD HARMONEERITUD STANDARDID ...................................................................................................... 2 UUED STANDARDID, TÜHISTATUD STANDARDID JA KAVANDID ARVAMUSKÜSITLUSEKS ..................................................................................................................... 9 ICS PÕHIRÜHMAD .................................................................................................................................. 10 01 ÜLDKÜSIMUSED. TERMINOLOOGIA. STANDARDIMINE. DOKUMENTATSIOON .............. 11 03 TEENUSED. ETTEVÕTTE ORGANISEERIMINE, JUHTIMINE JA KVALITEET. HALDUS. TRANSPORT. SOTSIOLOOGIA ........................................................................................... 14 07 MATEMAATIKA. LOODUSTEADUSED .......................................................................................... 17 11 TERVISEHOOLDUS ........................................................................................................................... 17 13 KESKKONNA- JA TERVISEKAITSE. OHUTUS .............................................................................. 23 17 METROLOOGIA JA MÕÕTMINE. FÜÜSIKALISED NÄHTUSED ................................................ 30 19 KATSETAMINE .................................................................................................................................. 31 21 ÜLDKASUTATAVAD MASINAD JA NENDE OSAD ..................................................................... 31 23 ÜLDKASUTATAVAD HÜDRO- JA PNEUMOSÜSTEEMID JA NENDE OSAD ........................... 32 25 TOOTMISTEHNOLOOGIA ................................................................................................................ 39 27 ELEKTRI- JA SOOJUSENERGEETIKA ............................................................................................ 41 29 ELEKTROTEHNIKA ........................................................................................................................... 41 31 ELEKTROONIKA ................................................................................................................................ 47 33 SIDETEHNIKA .................................................................................................................................... 48 35 INFOTEHNOLOOGIA. KONTORISEADMED .................................................................................. 58 39 TÄPPISMEHAANIKA. JUVEELITOOTED ....................................................................................... 64 43 MAANTEESÕIDUKITE EHITUS ....................................................................................................... 65 47 LAEVAEHITUS JA MERE-EHITISED .............................................................................................. 65 49 LENNUNDUS JA KOSMOSETEHNIKA ........................................................................................... 66 53 TÕSTE- JA TEISALDUSSEADMED .................................................................................................. 70 55 PAKENDAMINE JA KAUPADE JAOTUSSÜSTEEMID .................................................................. 71 61 RÕIVATÖÖSTUS ................................................................................................................................ 71 67 TOIDUAINETE TEHNOLOOGIA ...................................................................................................... 72 71 KEEMILINE TEHNOLOOGIA ........................................................................................................... 72 73 MÄENDUS JA MAAVARAD ............................................................................................................. 73 75 NAFTA JA NAFTATEHNOLOOGIA ................................................................................................. 73 77 METALLURGIA .................................................................................................................................. 76 79 PUIDUTEHNOLOOGIA ...................................................................................................................... 77 83 KUMMI- JA PLASTITÖÖSTUS ......................................................................................................... 78 85 PABERITEHNOLOOGIA .................................................................................................................... 79 87 VÄRVIDE JA VÄRVAINETE TÖÖSTUS .......................................................................................... 79 91 EHITUSMATERJALID JA EHITUS ................................................................................................... 80 93 RAJATISED .......................................................................................................................................... 94 97 OLME. MEELELAHUTUS. SPORT ................................................................................................... 99 STANDARDITE TÕLKED KOMMENTEERIMISEL ............................................................................. 103 ALGUPÄRASTE STANDARDITE ÜLEVAATUS ................................................................................. 106 ETTEPANEK EESTI STANDARDI TÜHISTAMISEKS ........................................................................ 107 VEEBRUARIKUUS KOOSTATUD STANDARDIPARANDUSED ...................................................... 109 VEEBRUARIKUUS KINNITATUD JA MÄRTSIKUUS MÜÜGILE SAABUNUD EESTIKEELSED STANDARDID .......................................................................................................................................... 109 VEEBRUARIKUUS MUUDETUD STANDARDITE PEALKIRJAD .................................................... 114 1 HARMONEERITUD STANDARDID Toote nõuetele vastavuse seaduse kohaselt avaldab Eesti Standardikeskus oma veebilehel ja ametlikus väljaandes teavet harmoneeritud standardeid ülevõtvate Eesti standardite kohta. Harmoneeritud standardiks nimetatakse EÜ direktiivide kontekstis Euroopa Komisjoni mandaadi alusel Euroopa standardimisorganisatsioonide koostatud ja vastu võetud standardit. Harmoneeritud standardite kasutamise korral eeldatakse enamiku vastavate direktiivide mõistes, et standardi kohaselt valmistatud toode täidab direktiivi olulisi nõudeid ning on seega reeglina kõige lihtsam viis tõendada direktiivide oluliste nõuete täitmist. Harmoneeritud standardi täpne tähendus ja õiguslik staatus tuleneb siiski iga direktiivi tekstist eraldi ning võib direktiivist olenevalt erineda. Lisainfo: http://www.newapproach.org/ http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/ Eesti Standardikeskus avaldab ametlikus väljaandes harmoneeritud standardeid ülevõtvate Eesti standardite kohta järgmist infot: • harmoneeritud standardi staatuse saanud Eesti standardid • harmoneeritud standardi staatuses olevate Eesti standardite kohta avaldatud märkused ja hoiatused, mida tuleb standardite järgimisel arvestada • harmoneeritud standardi staatuse kaotanud Eesti standardid Info esitatakse vastavate direktiivide kaupa. HARMONEERITUD STANDARDEID ÜLEVÕTVAD EESTI STANDARDID Direktiiv 94/9/EÜ Plahvatusohtlikus keskkonnas kasutatavad seadmed ja kaitsesüsteemid (EL Teataja 2013/C 40/01) Harmoneeritud standardit ülevõtva Eesti Kuupäev, Viide asendatavale Kuupäev, standardi tähis ja pealkiri millal Eesti Eesti standardile mil standardi asendatava aluseks standardi oleva järgimisest Euroopa tulenev standardi vastavus- kohta on eeldus avaldatud kaotab viide EL kehtivuse Teatajas Märkus 1 EVS-EN 13237:2012 12.02.2013 EVS-EN 13237:2003 30.04.2013 Plahvatusohtlikud keskkonnad. Plahvatusohtlikus Märkus 2.1 keskkonnas kasutamiseks mõeldud seadmete ja kaitsesüsteemide mõisted ja määratlused / Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres Märkus 1: Tavaliselt on kuupäevaks, mil asendatava standardi järgimisest tulenev vastavuseeldus kehtivuse kaotab, Euroopa standardiorganisatsiooni kehtestatud tühistamiskuupäev, kuid kõnealuste standardite kasutajate tähelepanu juhitakse asjaolule, et teatavatel erandjuhtudel võib olla ka teisiti. Märkus 2.1: Uue (või muudetud) standardi käsitlusala on samasugune nagu asendataval standardil. Osutatud kuupäeval kaotab kehtivuse asendatava standardi järgimisest tulenev vastavuseeldus direktiivi oluliste nõuetega. 2 Direktiiv 89/106/EMÜ Ehitustooted (EL Teataja 2013/C 59/01) Harmoneeritud standardit Kuupäev, Viide asendatavale Tähtaeg, Koos- ülevõtva Eesti standardi tähis ja millal Eesti Eesti standardile millal eksisteerimis- pealkiri standardi standard on perioodi aluseks oleva rakendatav lõpptähtaeg Euroopa harmo- Märkus 4 standardi neeritud kohta on standardina avaldatud viide EL Teatajas EVS-EN 450-1:2012 28.02.2013 EVS-EN 450- 01.05.2013 01.05.2014 Betoonis kasutatav lendtuhk. Osa 1: 1:2005+ A1:2007 Määratlus, spetsifikatsioon ja vastavuskriteeriumid / Fly ash for concrete - Part 1: Definition, specifications and conformity criteria EVS-EN 492:2012 28.02.2013 EVS-EN 492:2005 01.07.2013 01.07.2013 Kiudbetoonist tava- ja eriplaadid. Spetsifikatsioon ja katsemeetodid / Fibre-cement slates
Load more

Recommended publications
  • Platespin Migrate 12.2.2 User Guide
    PlateSpin® Migrate 12.2.2 User Guide June 2018 Legal Notice For information about legal notices, trademarks, disclaimers, warranties, export and other use restrictions, U.S. Government rights, patent policy, and FIPS compliance, see https://www.microfocus.com/about/legal/. Copyright © 2018 NetIQ Corporation, a Micro Focus Company. All rights reserved. License Grant License bought for PlateSpin Migrate 9.3 and later versions cannot be used with PlateSpin Migrate 9.2 and prior versions. Contents About This Guide 17 Part I Overview and Planning 19 1 Overview of Workload Migration 21 1.1 Workload Migration Scenarios . 21 1.2 Understanding Workload Migration . 21 1.3 Large-Scale Migration Planning and Automation . .23 2 Planning Your Workload Migrations 25 2.1 Supported Configurations . 25 2.1.1 Supported Source Workloads For Migration to Non-Cloud Platforms . 25 2.1.2 Supported Workloads for Migration to the Cloud. 29 2.1.3 Supported Workload Storage. 33 2.1.4 Supported Workload Architectures . 37 2.1.5 Supported Target Virtualization Platforms . 39 2.1.6 Supported Target Cloud Platforms. 42 2.1.7 Supported International Languages. 43 2.1.8 Supported Web Browsers . .43 2.2 Supported Data Transfer Methods . 43 2.2.1 File-Level Transfer (Live) . 43 2.2.2 Block-Level Transfer (Live) . 44 2.2.3 Offline Transfer with Temporary Boot Environment . 44 2.3 Security and Privacy . 45 2.3.1 Security Best Practices . 45 2.3.2 PlateSpin Migrate and Anti-Virus Applications. 45 2.3.3 Secure Connections Using TLS 1.2. 46 2.3.4 Security of Workload Data in Transmission .
    [Show full text]
  • Database Globalization Support Guide
    Oracle® Database Database Globalization Support Guide 19c E96349-05 May 2021 Oracle Database Database Globalization Support Guide, 19c E96349-05 Copyright © 2007, 2021, Oracle and/or its affiliates. Primary Author: Rajesh Bhatiya Contributors: Dan Chiba, Winson Chu, Claire Ho, Gary Hua, Simon Law, Geoff Lee, Peter Linsley, Qianrong Ma, Keni Matsuda, Meghna Mehta, Valarie Moore, Cathy Shea, Shige Takeda, Linus Tanaka, Makoto Tozawa, Barry Trute, Ying Wu, Peter Wallack, Chao Wang, Huaqing Wang, Sergiusz Wolicki, Simon Wong, Michael Yau, Jianping Yang, Qin Yu, Tim Yu, Weiran Zhang, Yan Zhu This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable: U.S. GOVERNMENT END USERS: Oracle programs (including any operating system, integrated software, any programs embedded, installed or activated on delivered hardware, and modifications of such programs) and Oracle computer documentation or other Oracle data delivered to or accessed by U.S.
    [Show full text]
  • CEN/TS 13130‐ Materiale Şi Articole În Contact Cu Produsele Alimentare
    CEN/TS 13130‐ Materiale şi articole în contact cu produsele alimentare. Materiale plastice supuse limitărilor. Partea 16: Determinarea caprolactamului şi 20 SMV CEN/TS 13130‐16:2011 Trim. I 16:2005 sării de caprolactam în simulanţi alimentari CEN/TS 13130‐ Materiale şi articole în contact cu produsele alimentare. Materiale plastice supuse limitărilor. Partea 20: Determinarea epiclorohidrinei în 21 SMV CEN/TS 13130‐20:2011 Trim. I 20:2005 materialele plastice CEN/TS 13130‐ Materiale şi articole în contact cu produsele alimentare. Materiale plastice supuse limitărilor. Partea 23: Determinarea formaldehidei şi 22 SMV CEN/TS 13130‐23:2011 Trim. I 23:2005 hexametilentetraminei în simulanţi alimentari 23 EN 15341:2007 Mentenanţă. Indicatori‐cheie de performanţă în materie de mentenanţă SMV EN 15341:2011 Trim. I 24 EN 13269:2006 Mentenanţă. Linii directoare pentru pregătirea contractelor de mentenanţă SMV EN 13269:2011 Trim. I 25 EN 13306:2010 Mentenanţă. Terminologia mentenanţei SMV EN 13306:2011 Trim. I Metode de încercare a componentelor auxiliare pentru zidărie. Partea 4: Determinarea rezistenţei şi caracteristicile deformării sub sarcină 26 EN 846‐4:2001 SMV EN 846‐4+A1:2011 Trim. I a bridelor de fixare 27 EN 196‐5:2011 Metode de încercări ale cimenturilor. Partea 5: Încercarea de puzzolanicitate a cimentului puzzolanic SMV EN 196‐5:2011 Trim. I 28 EN ISO 16852:2010 Opritoare de flacără. Cerinţe de performanţă, metode de încercare şi limite de utilizare SMV EN ISO 16852:2011 Trim. I 29 EN ISO 23993:2010 Produse de izolaţie termică pentru echipament în construcţii şi instalaţii industriale. Determinarea conductivităţii termice de proiectare SMV EN ISO 23993:2011 Trim.
    [Show full text]
  • Definition of Object-Oriented FRBR
    FRBR object-oriented definition and mapping from FRBRER, FRAD and FRSAD Document Type: Current Editorial Status: In Progress since [5/4/2017] Version 3.0 September 2017 International Working Group on FRBR and CIDOC CRM Harmonisation Supported by Delos NoE Editors: Chryssoula Bekiari Martin Doerr Patrick Le Bœuf Pat Riva Contributors: Trond Aalberg, Jérôme Barthélémy, Chryssoula Bekiari, Guillaume Boutard, Martin Doerr, Günther Görz, Dolores Iorizzo, Max Jacob, Carlos Lamsfus, Patrick Le Bœuf, Mika Nyman, João Oliveira, Christian Emil Ore, Allen H. Renear, Pat Riva, Richard Smiraglia, Stephen Stead, Maja Žumer, and others November 2015 Index INDEX ............................................................................................................................................... 2 FOREWORD ................................................................................................................................. 109 1. INTRODUCTION ..................................................................................................................... 1110 1.1. Purposes .................................................................................................................................................... 1110 1.1.1. A Common View of Cultural Heritage Information .......................................................................... 1211 1.1.2. A Verification of FRBR’s Internal Consistency ................................................................................ 1211 1.1.3. An Enablement of Information
    [Show full text]
  • Progress File (Standards Publications)
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. EN 62129:2006 Date published 18 OCTOBER 2008 Calibration of optical spectrum analyzers (IEC 62129:2006 (EQV)) 2. I.S. EN 61076-2-101:2003/A1:2006 Date published 18 OCTOBER 2008 Connectors for electronic equipment -- Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw- locking for low voltage applications (IEC 61076-2-101:2003/A1:2006 (EQV)) 3. I.S. EN 60464-1:1999/A1:2006 Date published 18 OCTOBER 2008 Varnishes used for electrical insulation -- Part 1: Definitions and general requirements (IEC 60464-1:1998/A1:2006 (EQV)) 4. I.S. EN 60464-3-1:2001/A1:2006 Date published 18 OCTOBER 2008 Varnishes used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 1: Ambient curing finishing varnishes (IEC 60464-3-1:2001/A1:2006 (EQV)) 5. I.S. EN 62329-1:2006 Date published 18 OCTOBER 2008 Heat shrinkable moulded shapes -- Part 1: Definitions and general requirements (IEC 62329-1:2005 (EQV)) 6. I.S. EN 61755-1:2006 Date published 18 OCTOBER 2008 Fibre optic connector optical interfaces -- Part 1: Optical interfaces for single mode non- dispersion shifted fibres - General and guidance (IEC 61755-1:2005 (EQV)) 7. I.S. EN 60454-3-8:2006 Date published 18 OCTOBER 2008 Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3 -8:2006 (EQV)) 8.
    [Show full text]
  • Standardiseringsprosjekter Og Nye Standarder
    Annonseringsdato: 2008-12-11 Listenummer: 14/2008 Standardiseringsprosjekter og nye standarder Listenummer: 14/2008 Side: 1 av 157 01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON 01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON Standardforslag til høring - europeiske (CEN) prEN 459-1 Bygningskalk - Del 1: Definisjoner, krav og samsvarskriterier Building lime - Part 1: Definitions, specifications and conformity criteria Språk: en Kommentarfrist: 31.12.2008 prEN 13306 Maintenance - Maintenance terminology Språk: en Kommentarfrist: 02.03.2009 prEN 15357 Fast gjenvunnet brensel - Terminologi, definisjoner og beskrivelser Solid recovered fuels - Terminology, definitions and descriptions Språk: en Kommentarfrist: 20.04.2009 prEN ISO 10991 Micro process engineering - Terminology (ISO/DIS 10991:2008) Språk: en Kommentarfrist: 28.01.2009 prEN ISO 13349 Vifter - Terminologi og definisjoner av kategorier Fans - Vocabulary and definitions of categories (ISO/DIS 13349:2008) Språk: en Kommentarfrist: 06.04.2009 prEN ISO 19146 Geographic information - Cross-domain vocabularies (ISO/DIS 19146:2008) Språk: en Kommentarfrist: 27.04.2009 Standardforslag til høring - internasjonale (ISO) ISO 7010:2003/DAmd 50 Safety sign M021: Disconnect before carrying out maintenance or repair Språk: en Kommentarfrist: 08.01.2009 ISO 7010:2003/DAmd 55 Safety sign W023: Warning; Corrosive substance Språk: en Kommentarfrist: 09.02.2009 ISO 7010:2003/DAmd 56 Safety sign W024: Warning; Danger of crushing hands Språk: en Kommentarfrist: 09.02.2009 ISO 7010:2003/DAmd
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 3
    Hrvatski zavod za norme Oglasnik za normativne dokumente 3/2013 lipanj, 2013. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije razvrstane po predmetnom ustroju i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije 2 Rezultati međunarodne i europske 1.1 Hrvatske norme ............................................................ A3 normizacije razvrstani po predmetnom ustroju .................................................A57 1.2 Nacrti hrvatskih norma ............................................... A28 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku ... A28 3 Popis radnih dokumenata Codex Alimentariusa 1.4 Povučene hrvatske norme.......................................... A38 1.5 Povučeni nacrti hrvatskih norma ....................................... 4 Obavijesti HZN-a 4.1 Cjenik hrvatskih norma 1.6 Ispravci hrvatskih norma .............................................A52 1.7 Naslovi objavljenih hrvatskih norma na hrvatskome jeziku........................................................A53 1.8 Drugi normativni dokumenti 1.9 Opća izdanja HZN-a A2 HZN
    [Show full text]
  • PDF Generated By
    Public Health Informatics This page intentionally left blank. Public Health Informatics Designing for Change— A Developing Country Perspective Sundeep Sahay Professor, Department of Informatics University of Oslo, Norway T. Sundararaman Professor, School of Health Systems Studies, Tata Institute of Social Sciences, Mumbai, India Jørn Braa Professor, Department of Informatics University of Oslo, Norway 1 1 Great Clarendon Street, Oxford, OX2 6DP, United Kingdom Oxford University Press is a department of the University of Oxford. It furthers the University’s objective of excellence in research, scholarship, and education by publishing worldwide. Oxford is a registered trade mark of Oxford University Press in the UK and in certain other countries © Oxford University Press 2017 The moral rights of the authors have been asserted Impression: 1 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, without the prior permission in writing of Oxford University Press, or as expressly permitted by law, by licence or under terms agreed with the appropriate reprographics rights organization. Enquiries concerning reproduction outside the scope of the above should be sent to the Rights Department, Oxford University Press, at the address above You must not circulate this work in any other form and you must impose this same condition on any acquirer Published in the United States of America by Oxford University Press 198 Madison Avenue, New York, NY 10016, United States of America British Library Cataloguing in Publication Data Data available Library of Congress Control Number: 2016951476 ISBN 978– 0– 19– 875877– 8 Printed and bound by CPI Group (UK) Ltd, Croydon, CR0 4YY Oxford University Press makes no representation, express or implied, that the drug dosages in this book are correct.
    [Show full text]
  • International Standards in Process CD Registered
    International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 February to 28 February 2013 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. TC 2 Fasteners ISO/CD 16228 Fastners — Certificates — Test reports TC 4 Rolling bearings ISO/CD 3245 Rolling bearings — Needle roller bearings, drawn cup without inner ring — Boundary dimensions and tolerances TC 6 Paper, board and pulps ISO/CD 16260 Paper and board - Determination of internal bond strength TC 10 Technical product documentation ISO/CD 15519- Specifications for diagrams for process industry — Part 2: Measurement and control 2 TC 20 Aircraft and space vehicles ISO/CD 16679 Space Systems — Relative motion analysis elements after LV/SC Separation TC 22 Road vehicles ISO/CD 18571 Road vehicles — Objective rating metric for non-ambiguous signals TC 23 Tractors and machinery for
    [Show full text]
  • Lista Mensal De Março 2013
    Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização lista mensal °°° março 2013 A presente -publicação tem por objetivo: - A divulgação das Normas Portuguesas recentemente editadas e anuladas, bem como das Normas Europeias adotadas como Normas Portuguesas, e das Normas Europeias e Internacionais publicadas e já disponíveis. - A divulgação pública dos projetos de Normas Portuguesas, Europeias e Internacionais, com vista à obtenção durante o período de inquérito público dos pontos de vista e contribuições nacionais que possam ser considerados na sequente elaboração, aprovação e homologação das Normas. - A divulgação de propostas de novos trabalhos de normalização europeia e internacional, para que se possa obter, durante o período de inquérito público, os pontos de vista e as contribuições nacionais. - A divulgação da edição e anulação de outros documentos normativos. ÍNDICE 1. Normas Portuguesas 1.1 Normas Portuguesas publicadas …………………………………………………………………………. 3 1.2 Normas Portuguesas anuladas …………………………………………………………………………… 5 1.3 Normas Portuguesas em re-exame ……………………………………………………………………… 7 1.4 Normas Europeias adotadas ……………………………………………………………………………… 8 2. Normas Europeias Publicadas 2.1 CEN …………………………………………………………………………………………………………….. 15 2.2 CENELEC ………………………………………………………………………………………………………. 20 2.3 CEN/CENELEC ……………………………………………………………………………………………….. 22 2.4 ETSI ……………………………………………………………………………………………………………… 23 3. Normas Internacionais publicadas IEC …………………………………………………………………………………………………………………… 24 ISO …………………………………………………………………………………………………………………..
    [Show full text]
  • Environmental Performance of Digital Printing. Literature Study
    VTT CREATES BUSINESS FROM TECHNOLOGY Technology and market foresight • Strategic research • Product and service development • IPR and licensing VTT RESEARCH NOTES 2538 • Assessments, testing, inspection, certification • Technology and innovation management • Technology partnership • • • VTT RESEARCH NOTES 2538 ENVIRONMENTAL PERFORMANCE OF DIGITAL PRINTING PERFORMANCE OF DIGITAL 2538 ENVIRONMENTAL • VTT RESEARCH NOTES Digital printing technology has developed considerably in recent years. Electropho- tography and inkjet are gaining ground by enabling new products as well as taking markets from the traditional printing methods. The environmental performance of the digital printing is marketed to be more sustainable than of the traditional print- ing methods. This literature survey looks at digital prining methods and digitally printed products from the environmental standpoint. The report also presents some methods for assessing the environmental performance of digital printing operations at the company level. Furthermore, main environmental indicators, such as energy and materials consumption, are presented. Pentti Viluksela Merja Kariniemi & Minna Nors Environmental performance of digital printing Literature study ISBN 978-951-38-7630-2 (soft back ed.) ISBN 978-951-38-7631-9 (URL: http://www.vtt.fi/publications/index.jsp) ISSN 1235-0605 (soft back ed.) ISSN 1455-0873 (URL: http://www.vtt.fi/publications/index.jsp) VTT TIEDOTTEITA – RESEARCH NOTES 2538 Environmental performance of digital printing Literature study Pentti Viluksela Merja Kariniemi & Minna Nors ISBN 978-951-38-7630-2 (soft back ed.) ISSN 1235-0605 (soft back ed.) ISBN 978-951-38-7631-9 (URL: http://www.vtt.fi/publications/index.jsp) ISSN 1455-0865 (URL: http://www.vtt.fi/publications/index.jsp) Copyright © VTT 2010 JULKAISIJA – UTGIVARE – PUBLISHER VTT, Vuorimiehentie 5, PL 1000, 02044 VTT puh.
    [Show full text]
  • Appendix a Shewhart Constants for Control Charts
    Appendix A Shewhart Constants for Control Charts The main Shewhart constants d2, d3, and c4 can be obtained for any n using R as shown in the following examples: library(SixSigma) ss.cc.getd2(n = 5) ## d2 ## 2.325929 ss.cc.getd3(n = 5) ## d3 ## 0.8640819 ss.cc.getc4(n = 5) ## c4 ## 0.9399856 The rest of Shewhart constants that can be found at any textbook are computed using those three basic constants. A full table of constants can also be generated using R. Table A.1 shows the constants used in this book. There are other constants not covered by this book which could also be computed just using the appropriate formula. A data frame with the constants in Table A.1 can be obtained with the following code: nmax <- 25 n <- 2:nmax d2 <- sapply(2:nmax, ss.cc.getd2) d3 <- sapply(2:nmax, ss.cc.getd3) c4 <- sapply(2:nmax, ss.cc.getc4) A2 <- 3/(d2*sqrt(n)) © Springer International Publishing Switzerland 2015 285 E.L. Cano et al., Quality Control with R, Use R!, DOI 10.1007/978-3-319-24046-6 286 A Shewhart Constants for Control Charts Table A.1 Shewhart constants n d2 d3 c4 A2 D3 D4 B3 B4 2 1.1284 0.8525 0.7979 1.8800 0.0000 3.2665 0.0000 3.2665 3 1.6926 0.8884 0.8862 1.0233 0.0000 2.5746 0.0000 2.5682 4 2.0588 0.8798 0.9213 0.7286 0.0000 2.2821 0.0000 2.2660 5 2.3259 0.8641 0.9400 0.5768 0.0000 2.1145 0.0000 2.0890 6 2.5344 0.8480 0.9515 0.4832 0.0000 2.0038 0.0304 1.9696 7 2.7044 0.8332 0.9594 0.4193 0.0757 1.9243 0.1177 1.8823 8 2.8472 0.8198 0.9650 0.3725 0.1362 1.8638 0.1851 1.8149 9 2.9700 0.8078 0.9693 0.3367 0.1840 1.8160 0.2391 1.7609 10
    [Show full text]