International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 February to 28 February 2013
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 2 Fasteners ISO/CD 16228 Fastners — Certificates — Test reports TC 4 Rolling bearings ISO/CD 3245 Rolling bearings — Needle roller bearings, drawn cup without inner ring — Boundary dimensions and tolerances TC 6 Paper, board and pulps ISO/CD 16260 Paper and board - Determination of internal bond strength TC 10 Technical product documentation ISO/CD 15519- Specifications for diagrams for process industry — Part 2: Measurement and control 2 TC 20 Aircraft and space vehicles ISO/CD 16679 Space Systems — Relative motion analysis elements after LV/SC Separation TC 22 Road vehicles ISO/CD 18571 Road vehicles — Objective rating metric for non-ambiguous signals TC 23 Tractors and machinery for agriculture and forestry ISO/CD 16230- Agricultural machinery and tractors — Safety of electrical and electronic components and systems — Part 1: General 1 requirements
ISO/CD 17962 Agricultural machinery — Seeding (planting) equipment — Considerations for minimizing the effects of fan exhaust from pneumatic systems TC 28 Petroleum products and lubricants ISO/CD 4263-3 Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids using the TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids TC 31 Tyres, rims and valves ISO/CD 17464 Pneumatic Tubes for Automotive Vehicles — Technical Requirements and Test Methods TC 43 Acoustics ISO 3743- Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, 2:1994/CD movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms — Amendment 1 Amd 1 TC 44 Welding and allied processes ISO/CD 15012- Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 4: 4 Design requirements TC 46 Information and documentation ISO/CD 18626 Information and documentation — Interlibrary Loan Transactions TC 58 Gas cylinders ISO/CD 15453 Gas cylinders - Seamless steel and aluminium-alloy gas cylinders - Evaluation of existing gas cylinders and consideration of their safe use in other jurisdictions TC 59 Buildings and civil engineering works ISO/CD 12006- Building construction — Organization of information about construction works — Part 2: Framework for classification of 2 information TC 60 Gears ISO/DTR Calculation of micro-pitting load capacity of cylindrical spur and helical gears — Part 2: Examples of calculation for 15144-2 micropitting TC 61 Plastics ISO/CD 11357- Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics 7 TC 68 Financial services ISO/CD 9564-4 Banking — Personal Identification Number (PIN) management and security — Part 4: Guidelines for PIN handling in open networks TC 70 Internal combustion engines ISO/CD 8178-5 Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels TC 87 Cork ISO/CD 7322 Composition cork — Test methods TC 92 Fire safety ISO/CD 5660-4 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of heat release for determination of low levels of combustibility TC 94 Personal safety -- Protective clothing and equipment ISO/CD 12312- Eye and face protection — Sunglasses and related eyewear — Part 2: Eye protectors for direct observation of the sun 2
ISO/CD 16900- Respiratory protective devices — Methods of test and test equipment — Part 8: Measurement of RPD air flow rates 8 TC 96 Cranes ISO/CD 11660- Cranes — Access, guards and restraints — Part 2: Mobile cranes 2
ISO/CD 11662- Cranes — Experimental determination of crane performance — Part 2: Structural competence under static loading 2 TC 106 Dentistry ISO/CD 4823 Dentistry — Elastomeric impression materials ISO/CD 6872 Dentistry — Ceramic materials ISO/CD 17937 Dentistry — Torque transmitter for handpieces ISO/CD 18397 Dentistry — Scaler handpieces and scaler tips TC 118 Compressors and pneumatic tools, machines and equipment ISO/CD 5393 Pneumatic tools and machines — Rotary tools for threaded fasteners — Performance test method TC 121 Anaesthetic and respiratory equipment IEC/CD 80601- Medical electrical equipment — Part 2-71: Particular requirements for the basic safety and essential performance of 2-71 functional oximeter equipment
TC 130 Graphic technology ISO/CD 16684- Graphic technology — Extensible metadata platform (XMP) specification — Part 2: Validation using RELAX NG 2
TC 137 Footwear sizing designations and marking systems ISO/DTS Footwear - Sizing - Vocabulary and terminology 19408
TC 147 Water quality ISO/CD 17943 Water quality — Determination of volatile organic compounds in water — Method using headspace solid-phase micro- extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
ISO/CD 13164- Water quality — Measurement of the activity concentration of radon-222 — Part 4: Test method using liquid scintillation 4 counting
TC 150 Implants for surgery ISO/CD 14242- Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing 1 machines and corresponding environmental conditions for test
TC 156 Corrosion of metals and alloys ISO/CD 17224 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
ISO/CD 17245 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by immersing in molten salt or other liquids
ISO/CD 18070 Corrosion of metals and alloys — Crevice corrosion formers for flat specimens or tubes of stainless steels in corrosive solutions
ISO/CD 18089 Corrosion of metals and alloys — Determination of the electrochemical critical crevice temperature (ECCT) for stainless steels under potentiostatic control
TC 158 Analysis of gases ISO/CD 7504 Gas analysis — Vocabulary ISO/CD 12963 Gas analysis — Measurement protocols and data evaluation techniques for general analytical applications TC 159 Ergonomics ISO/DTR Ergonomics — Application document for ISO standards on manual handling (ISO 11228-1, ISO 11228-2 and ISO 11228-3) 12295 and working postures (ISO 11226)
ISO/CD 9241- Ergonomics of human-system interaction — Part 392: Ergonomic requirements for the reduction of visual fatigue from 392 stereoscopic images
TC 172 Optics and photonics ISO/CD 19012- Microscopes — Designation of microscope objectives — Part 3: Spectral transmittance 3
ISO/CD 15004- Ophthalmic instruments — Fundamental requirements and test methods — Part 2: Light hazard protection 2
TC 173 Assistive products for persons with disability ISO/CD 16840- Wheelchair seating — Part 6: Determination of the changes that occur in physical and mechanical properties based on use 6 — Seat cushions
TC 181 Safety of toys ISO/CD 8124-7 Safety of toys — Part 7: Fingerpaints - Requirements and test methods ISO/DTR Safety of toys — Part 8: Age determination guidelines 8124-8
TC 189 Ceramic tile ISO/CD 10545- Ceramic tiles — Part 1: Sampling and basis for acceptance 1
ISO/CD 13007- Ceramic tiles — Grouts and adhesives — Part 5: Liquid applied waterproof membranes for the installation of ceramic tiles 5
TC 204 Intelligent transport systems ISO/CD 11067 Intelligent transport systems — Curve speed warning systems (CSWS) — Performance requirements and test procedures TC 206 Fine ceramics ISO/CD 17138 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength
ISO/CD 17139 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Thermophysical properties — Determination of thermal expansion
ISO/CD 17140 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of fatigue properties at constant amplitude
ISO/CD 17142 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure — Determination of fatigue properties at constant amplitude
ISO/CD 17161 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Guide to the determination of the degree of misalignment in uniaxial mechanical tests
TC 215 Health informatics ISO/CD TS Health informatics — Semantic network framework of traditional Chinese medicine language system 17938
ISO/DTS Traditional Chinese medicine literature metadata 17948
TC 223 Societal security ISO/CD 22315 Societal security — Mass evacuation — Guidelines for planning ISO/CD 22325 Societal security — Guidelines for emergency capability assessment for organizations TC 234 Fisheries and aquaculture ISO/CD 16541 Methods for sea lice surveillance on marine finfish farms TC 254 Safety of amusement rides and amusement devices ISO/CD 17929 Biomechanics of amusement ride passengers TC 257 General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions
ISO/CD 17742 General calculation methods on energy efficiency and savings for countries, regions or cities TC 261 Additive manufacturing ISO/CD 17296- Additive manufacturing — Rapid technologies (rapid prototyping) — Part 1: Terminology 1
ISO/CD 17296- Additive manufacturing — Rapid technologies (rapid prototyping) — Part 2: Methods, processes and materials 2 JTC 1 Information technology ISO/IEC PDTR Information technology — Future Network — Problem statement and requirements — Part 2: Naming and addressing 29181-2
ISO/IEC CD Information technology — Application management — Requirements for application management 16350
ISO/IEC CD Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — 25022 Measurement of quality in use
ISO/IEC CD Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — 25023 Measurement of system and software product quality
ISO/IEC CD Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — 25024 Measurement of data quality
ISO/IEC CD Identification cards — Test methods — Part 5: Optical memory cards 10373-5
ISO/IEC CD Method for measuring first page out time of a digital printing device 17629
ISO/IEC Information technology — Generic coding of moving pictures and associated audio information: Systems — Part 1: — 13818-1/PDAM Amendment 5: Transport of MVC depth video sub-bitstream and extensions to support HEVC low delay coding mode 5
ISO/IEC Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment 41: Conformance 14496- testing of the MVC plus depth extension of AVC 4:2004/PDAM 41
ISO/IEC Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 32 14496- 5:2001/PDAM 32
ISO/IEC Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 4: Additional 14496- colour space and tone mapping descriptors 10:2012/PDAM 4
ISO/IEC Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 5: Multi- 14496- resolution frame compatible stereo coding 10:2012/PDAM 5
ISO/IEC PDTR Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 3: 23009-3
ISO/IEC CD Information technology — Database languages — SQL — Part 1: Framework (SQL/Framework) 9075-1 ISO/IEC CD Information technology — Database languages — SQL — Part 2: Foundation (SQL/Foundation) 9075-2
ISO/IEC CD Information technology — Database languages — SQL — Part 3: Call-Level Interface (SQL/CLI) 9075-3
ISO/IEC CD Information technology — Database languages — SQL — Part 4: Persistent Stored Modules (SQL/PSM) 9075-4
ISO/IEC CD Information technology — Database languages — SQL — Part 9: Management of External Data (SQL/MED) 9075-9
ISO/IEC CD Information technology — Database languages — SQL — Part 10: Object Language Bindings (SQL/OLB) 9075-10
ISO/IEC CD Information technology — Database languages — SQL — Part 11: Information and Definition Schemas (SQL/Schemata) 9075-11
ISO/IEC CD Information technology — Database languages — SQL — Part 13: SQL Routines and Types Using the Java TM 9075-13 Programming Language (SQL/JRT)
ISO/IEC CD Information technology — Database languages — SQL — Part 14: XML-Related Specifications (SQL/XML) 9075-14
ISO/IEC CD Information technology — Document Container File — Part 1: Core 21320-1
DIS circulated
Period from 01 February to 28 February 2013
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates TC 4 Rolling bearings
ISO/DIS 199 * Rolling bearings - Thrust bearings - Geometrical product specification (GPS) and tolerance values 2013-05-12 (Revision of ISO 199:2005)
ISO/DIS 492 * Rolling bearings — Radial bearings — Dimensional and geometrical tolerances 2013-05-12 (Revision of ISO 492:2002) TC 6 Paper, board and pulps
ISO/DIS 16945 * Corrugating medium — Determination of the edge crush resistance after laboratory fluting 2013-05-26 TC 8 Ships and marine technology
ISO/DIS 17602 * Ships and marine technology — Metal valves for use in flanged pipe — Face to face and centre to face 2013-05-27 dimensions ISO/DIS 8728 * Ships and marine technology — Marine gyro-compasses 2013-05-23 (Revision of ISO 8728:1997)
ISO/DIS 16328 * Ships and marine technology — Gyro-compasses for high-speed craft 2013-05-23 (Revision of ISO 16328:2001)
ISO/DIS * Ships and marine technology — Transmitting heading devices (THDs) — Part 1: Gyro-compasses 2013-05-23 22090-1 (Revision of ISO 22090-1:2002, ISO 22090-1:2002/Cor 1:2005)
ISO/DIS * Ships and marine technology — Transmitting heading devices (THDs) — Part 2: Geomagnetic principles 2013-05-23 22090-2 (Revision of ISO 22090-2:2004, ISO 22090-2:2004/Cor 1:2005)
ISO/DIS * Ships and marine technology — Transmitting heading devices (THDs) — Part 3: GNSS principles 2013-05-23 22090-3 (Revision of ISO 22090-3:2004, ISO 22090-3:2004/Cor 1:2005) TC 10 Technical product documentation
ISO/DIS 15787 * Technical product documentation — Heat-treated ferrous parts — Presentation and indications 2013-05-11 (Revision of ISO 15787:2001) TC 20 Aircraft and space vehicles
ISO/DIS 4118 * Air cargo — Non-certified lower deck containers — Specification and testing 2013-05-21 (Revision of ISO 4118:2005)
ISO/DIS 10254 * Air cargo and ground equipment — Vocabulary 2013-05-17 (Revision of ISO 10254:1995) TC 22 Road vehicles
ISO/DIS 6469- * Electrically propelled road vehicles — Safety specifications — Part 4: Post crash electrical safety 2013-05-22 4 requirements
ISO/DIS 23828 * Fuel cell road vehicles - Energy consumption measurement — Vehicles fuelled with compressed 2013-05-22 hydrogen (Revision of ISO 23828:2008) TC 23 Tractors and machinery for agriculture and forestry
ISO * Agricultural tractors — Requirements for steering — Amendment 1 2013-05-27 10998:2008/D Amd 1
TC 24 Particle characterization including sieving
ISO/DIS * Determination of particle size distribution by gravitational liquid sedimentation methods — Part 4: Balance 2013-05-17 13317-4 method
TC 29 Small tools
ISO/DIS * Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks 2013-05-11 26623-1 (Revision of ISO 26623-1:2008)
ISO/DIS * Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers 2013-05-11 26623-2 (Revision of ISO 26623-2:2008) TC 34 Food products ISO/DIS 14244 * Oilseed meals — Determination of soluble protein in potassium hydroxide solution 2013-05-15
TC 37 Terminology and other language and content resources
ISO/DIS * Graphic notations for concept modeling in terminology work and its relationship with UML — Part 1: 2013-05-12 24156-1 Guidelines for using UML and mind-mapping notation in terminology work (Revision of ISO/TR 24156:2008) TC 38 Textiles
ISO/DIS * Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 1: 2013-05-15 24362-1 Detection of the use of certain azo colorants accessible with and without extracting the fibres
ISO/DIS * Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 3: 2013-05-15 24362-3 Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
TC 45 Rubber and rubber products
ISO/DIS 289-1 * Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of 2013-05-05 Mooney viscosity (Revision of ISO 289-1:2005)
ISO/DIS 815-1 * Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or 2013-05-05 elevated temperatures (Revision of ISO 815-1:2008)
ISO/DIS 815-2 * Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures 2013-05-05 (Revision of ISO 815-2:2008)
ISO/DIS 6914 * Rubber, vulcanized or thermoplastic — Determination of ageing characteristics by measurement of stress 2013-05-05 relaxation in tension (Revision of ISO 6914:2008)
ISO/DIS 17257 * Rubber — Identification of polymers — Pyrolytic gas-chromatographic method using mass-spectrometric 2013-05-05 detection
ISO/DIS 2000 * Rubber, raw natural — Guidelines for the specification of technically specified rubber (TSR) 2013-05-28 (Revision of ISO 2000:2003) ISO/DIS Rubber and plastics gloves for food services — Limits for extractable substances 2013-04-16 14285.2
TC 59 Buildings and civil engineering works
ISO/DIS 6707- * Building and civil engineering — Vocabulary — Part 2: Contract terms 2013-05-05 2 (Revision of ISO 6707-2:1993) TC 60 Gears
ISO/DIS 14104 * Gears — Surface temper etch inspection after grinding 2013-05-23 (Revision of ISO 14104:1995) TC 61 Plastics
ISO/DIS * Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles 2013-07-15 11358-1 (Revision of ISO 11358:1997)
ISO/DIS * Plastics — Thermomechanical analysis (TMA) — Part 1: General principles 2013-05-11 11359-1 (Revision of ISO 11359-1:1999) ISO/DIS 15985 * Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas (Revision of ISO 15985:2004, ISO 15985:2004/Cor 1:2007)
ISO/DIS 17221 * Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image) 2013-05-05 TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/DIS 16903 * Characteristics of LNG influencing design and material selection 2013-07-08
ISO/DIS 13354 * Petroleum and natural gas industries — Shallow gas diverter equipment 2013-07-08 TC 69 Applications of statistical methods
ISO/DIS 16336 * Robust parameter design (RPD) 2013-05-17 TC 94 Personal safety -- Protective clothing and equipment
ISO/DIS 14787 * Protective clothing — Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions — Atomizer test TC 98 Bases for design of structures
ISO/DIS 4355 * Bases for design of structures — Determination of snow loads on roofs 2013-05-22 (Revision of ISO 4355:1998) TC 106 Dentistry
ISO/DIS 9173- * Dentistry — Extraction forceps — Part 3: Design and dimensions 2013-07-15 3 (Revision of ISO 9173-1:2006) TC 108 Mechanical vibration, shock and condition monitoring
ISO 20283- * Mechanical vibration — Measurement of vibration on ships — Part 4: Measurement and evaluation of 2013-05-06 4:2012/DAmd vibration of the ship propulsion machinery — Amendment 1 1 TC 119 Powder metallurgy
ISO/DIS 14317 * Sintered metal materials excluding hardmetals — Determination of compressive yield strength 2013-05-26 (Revision of ISO 14317:2006) TC 127 Earth-moving machinery
ISO/DIS 8812 * Earth-moving machinery — Backhoe loaders — Definitions and commercial specifications 2013-05-26 (Revision of ISO 8812:1999) TC 130 Graphic technology
ISO/DIS * Graphic technology — Process control for the production of half-tone colour separations, proofs and 2013-05-19 12647-4 production prints — Part 4: Publication gravure printing (Revision of ISO 12647-4:2005) TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO/DIS Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water 2013-04-16 16422.2 under pressure — Specifications (Revision of ISO 16422:2006) TC 146 Air quality
ISO/DIS 8672 * Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast 2013-05-16 optical microscopy — Membrane filter method (Revision of ISO 8672:1993) TC 147 Water quality
ISO/DIS 16308 * Water quality — Determination of glyphosate and AMPA — Method using high performance liquid 2013-05-12 chromatography (HPLC) with tandem mass spectrometric detection TC 150 Implants for surgery
ISO/DIS * Retrieval and analysis of surgical implants — Part 2: Analysis of retrieved surgical implants 2013-05-15 12891-2 (Revision of ISO 12891-2:2000) TC 163 Thermal performance and energy use in the built environment
ISO/DIS 6781- * Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared 2013-07-15 3 methods — Part 3: Qualifications of Equipment Operators, Data Analysts and Report Writers TC 165 Timber structures
ISO/DIS 13910 * Timber structures - Strength graded timber - Test methods for structural properties 2013-05-12 (Revision of ISO 13910:2005) TC 172 Optics and photonics
ISO 12858- * Optics and optical instruments — Ancillary devices for geodetic instruments — Part 2: Tripods — 2013-05-07 2:1999/DAmd Amendment 1 1 TC 174 Jewellery
ISO/DIS 18323 * Jewellery — Consumer confidence in the diamond industry 2013-07-08 TC 185 Safety devices for protection against excessive pressure
ISO/DIS 4126- * Safety devices for protection against excessive pressure — Part 6: Application, selection and installation 2013-07-15 6 of bursting disc safety devices (Revision of ISO 4126-6:2003) TC 188 Small craft
ISO/DIS 6185- * Inflatable boats — Part 3: Boats with a maximum motor power rating of 15 kW and greater 2013-07-15 3 (Revision of ISO 6185-3:2001) TC 190 Soil quality
ISO/DIS * Soil quality - Acid-base accounting procedure for acid sulfate soils — Part 1: Introduction and definitions, 2013-05-07 14388-1 symbols and acronyms, sampling and sample preparation
ISO/DIS * Soil quality - Acid-base accounting procedure for acid sulfate soils — Part 2: Chromium reducible sulfur 2013-05-07 14388-2 (CRS) methodology
ISO/DIS 17184 * Soil quality — Determination of carbon and nitrogen by near infrared spectrometry 2013-07-08 TC 194 Biological evaluation of medical devices
ISO/DIS * Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive 2013-04-15 10993-3.2 toxicity (Revision of ISO 10993-3:2003) TC 204 Intelligent transport systems
ISO/DIS 11270 * Intelligent transport systems — Lane keeping assistance systems (LKAS) — Performance requirements 2013-05-12 and test procedures
ISO/DIS 26684 * Intelligent transport systems — Cooperative intersection signal information and violation warning systems 2013-05-12 (CIWS) — Performance requirements and test procedures TC 216 Footwear
ISO/DIS 17701 * Footwear — Test methods for uppers, lining and insocks — Colour migration 2013-07-15 (Revision of ISO 17701:2003) TC 218 Timber
ISO/DIS * Physical and mechanical properties of wood - Test methods for small clear specimen — Part 1: 2013-05-19 13061-1 Determination of moisture content for physical and mechanical tests (Revision of ISO 3130:1975)
ISO/DIS * Physical and mechanical properties of wood - Test methods for small clear specimen — Part 2: 2013-05-19 13061-2 Determination of density for physical and mechanical tests (Revision of ISO 3130:1975)
ISO/DIS * Physical and mechanical properties of wood - Test methods for small clear specimen — Part 3: 2013-05-19 13061-3 Determination of ultimate strength in static bending (Revision of ISO 3130:1975)
ISO/DIS * Physical and mechanical properties of wood - Test methods for small clear specimen — Part 4: 2013-05-19 13061-4 Determination of modulus of elasticity in static bending (Revision of ISO 3130:1975)
ISO/DIS * Physical and mechanical properties of wood - Test methods for small clear specimen — Part 6: 2013-05-19 13061-6 Determination of ultimate tensile stress parallel to grain (Revision of ISO 3130:1975)
ISO/DIS * Physical and mechanical properties of wood - Test methods for small clear specimen — Part 7: 2013-05-19 13061-7 Determination of ultimate tensile stress perpendicular to grain (Revision of ISO 3130:1975) TC 226 Materials for the production of primary aluminium
ISO/DIS 2926 * Aluminium oxide used for the production of primary aluminium — Particle size analysis for the range 45 2013-05-19 µm to 150 µm — Method using electroformed sieves (Revision of ISO 2926:2005) TC 244 Industrial furnaces and associated processing equipment
ISO/DIS * Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel 2013-05-24 13577-2 handling systems JTC 1 Information technology
ISO/IEC DIS * Information technology — Software asset management — Part 5: Overview and vocabulary 2013-05-27 19770-5
ISO/IEC * Identification cards — Test methods — Part 6: Proximity cards — Amendment 5: Bit rates of 3fc/4 and fc 2013-05-19 10373- 6:2011/DAmd 5
ISO/IEC * Identification cards — Contactless integrated circuit cards — Proximity cards — Part 4: Transmission 2013-05-16 14443- protocol — Amendment 4: Frame with error correction 4:2008/DAmd 4
ISO/IEC DIS * Test methods for machine readable travel documents (MRTD) — Part 1: Physical Test Methods for 2013-05-12 18745-1 Passport Books (durability)
ISO/IEC * Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation 2013-05-16 23009- description and segment formats — Amendment 1: Support for Event Messages and extended Audio 1:2012/DAmd Channel Configuration 1
FDIS circulated
Period from 01 February to 28 February 2013
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates TC 6 Paper, board and pulps
ISO/FDIS 217 * Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and 2013-04-22 indication of machine direction (Revision of ISO 217:2008) TC 17 Steel
ISO/FDIS 5951 * Hot-rolled steel sheet of higher yield strength with improved formability 2013-04-26 (Revision of ISO 5951:2008) TC 20 Aircraft and space vehicles
ISO/FDIS * Air cargo equipment — Restraint straps — Part 2: Utilization guidelines and lashing conditions 2013-04-09 16049-2 (Revision of ISO 16049-2:2005)
ISO/FDIS * Space environment (natural and artificial) — Methods for estimation of future geomagnetic activity 16698 TC 22 Road vehicles ISO/FDIS Road vehicles — Frontal fixed barrier or pole impact test procedure 2013-04-21 3560.2 (Revision of ISO 3560:2001) ISO/FDIS Road vehicles — Side impact test procedures for the evaluation of occupant interactions with side airbags 2013-04-21 15829.2 by pole impact simulation (Revision of ISO 15829:2004) TC 23 Tractors and machinery for agriculture and forestry
ISO/FDIS * Agricultural machinery — Agricultural trailers and trailed equipment — Drawbar jacks 2013-04-12 12140 (Revision of ISO 12140:1998)
ISO/FDIS * Crop protection equipment — Test method for the determination of drainable volume and its concentration 2013-04-08 16236
ISO/FDIS * Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements 2013-04-08 19932-1 (Revision of ISO 19932-1:2006, ISO 19932-2:2006)
ISO/FDIS * Equipment for crop protection — Knapsack sprayers — Part 2: Test methods 2013-04-08 19932-2 (Revision of ISO 19932-1:2006, ISO 19932-2:2006) TC 38 Textiles
ISO/FDIS 105- * Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp 2013-04-08 B02 test (Revision of ISO 105-B02:1994, ISO 105-B02:1994/Amd 1:1998, ISO 105-B02:1994/Amd 2:2000) TC 43 Acoustics
ISO * Acoustics — Measurement of sound pressure levels in the interior of aircraft during flight — Amendment 1 2013-04-06 5129:2001/FD Amd 1 TC 44 Welding and allied processes
ISO/FDIS 9312 * Resistance welding equipment — Insulated pins for use in electrode back-ups 2013-05-08 (Revision of ISO 9312:1990)
ISO/FDIS * Welding and allied processes — Types of joint preparation — Part 1: Manual metal-arc welding, gas- 9692-1 shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (Revision of ISO 9692-1:2003) TC 61 Plastics
ISO/FDIS * Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2013-04-21 26842-1 1: Resistance to delamination in non-severe environments (Revision of ISO 26842-1:2009)
ISO/FDIS * Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2013-04-21 26842-2 2: Resistance to delamination in severe environments (Revision of ISO 26842-2:2009) TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO/FDIS * Plastics collapsible containers for human blood and blood components — Part 1: Conventional containers 2013-04-22 3826-1 (Revision of ISO 3826-1:2003) TC 84 Devices for administration of medicinal products and intravascular catheters
ISO/FDIS * Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements 10555-1 (Revision of ISO 10555-1:1995, ISO 10555-1:1995/Amd 1:1999, ISO 10555-1:1995/Amd 2:2004)
ISO/FDIS * Intravascular catheters — Sterile and single-use catheters — Part 3: Central venous catheters 10555-3 (Revision of ISO 10555-3:1996, ISO 10555-3:1996/Cor 1:2002)
ISO/FDIS * Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters 10555-4 (Revision of ISO 10555-4:1996, ISO 10555-4:1996/Cor 1:2002)
ISO/FDIS * Intravascular catheters — Sterile and single-use catheters — Part 5: Over-needle peripheral catheters 10555-5 (Revision of ISO 10555-5:1996, ISO 10555-5:1996/Amd 1:1999, ISO 10555-5:1996/Cor 1:2002) TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/FDIS * Radiological protection — Recommendations for dealing with discrepancies between personal dosimeter 2013-04-22 15690 systems used in parallel TC 106 Dentistry
ISO * Dentistry — Evaluation of biocompatibility of medical devices used in dentistry — Amendment 1: Positive 2013-04-15 7405:2008/FD control material Amd 1 TC 108 Mechanical vibration, shock and condition monitoring
ISO/FDIS * Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration 10819 transmissibility of gloves at the palm of the hand (Revision of ISO 10819:1996) TC 119 Powder metallurgy
ISO/FDIS 3326 * Hardmetals — Determination of (the magnetization) coercivity 2013-05-22 (Revision of ISO 3326:1975) TC 135 Non-destructive testing
ISO/FDIS * Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality of 2013-04-15 19232-1 radiographs using wire-type indicators (Revision of ISO 19232-1:2004, ISO 19232-1:2004/Cor 1:2007)
ISO/FDIS * Non-destructive testing — Image quality of radiographs — Part 2: Determination of the image quality 2013-04-15 19232-2 value using step/hole-type image quality indicators (Revision of ISO 19232-2:2004, ISO 19232-2:2004/Cor 1:2007)
ISO/FDIS * Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes 2013-04-15 19232-3 (Revision of ISO 19232-3:2004)
ISO/FDIS * Non-destructive testing — Image quality of radiographs — Part 4: Experimental evaluation of image 2013-04-15 19232-4 quality values and image quality tables (Revision of ISO 19232-4:2004)
ISO/FDIS * Non-destructive testing — Image quality of radiographs — Part 5: Determination of the image 2013-04-15 19232-5 unsharpness value using duplex wire-type image quality indicators (Revision of ISO 19232-5:2004) TC 136 Furniture
ISO/FDIS * Furniture — Tests for surface finishes — Part 2: Assessment of resistance to wet heat 2013-04-05 4211-2 (Revision of ISO 4211-2:1993)
ISO/FDIS * Furniture — Tests for surface finishes — Part 3: Assessment of resistance to dry heat 2013-04-05 4211-3 (Revision of ISO 4211-3:1993) TC 163 Thermal performance and energy use in the built environment
ISO * Hygrothermal performance of building materials and products — Determination of moisture content by 2013-04-22 12570:2000/F drying at elevated temperature — Amendment 1 DAmd 1 TC 168 Prosthetics and orthotics
ISO * Prosthetics — Structural testing of lower-limb prostheses — Requirements and test methods — 10328:2006/F Amendment 1 DAmd 1
TC 176 Quality management and quality assurance
ISO/FDIS * Quality management — Customer satisfaction — Guidelines for business-to-consumer electronic 2013-04-26 10008 commerce transactions
TC 193 Natural gas
ISO/FDIS * Natural gas — Quality designation 13686 (Revision of ISO 13686:1998) TC 204 Intelligent transport systems
ISO/FDIS * Intelligent transport systems — Forward vehicle collision mitigation systems — Operation, performance, 2013-04-21 22839 and verification requirements
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO/FDIS * In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in 2013-04-08 15197 managing diabetes mellitus (Revision of ISO 15197:2003) TC 213 Dimensional and geometrical product specifications and verification
ISO/FDIS * Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics 2013-04-15 25178-604 of non-contact (coherence scanning interferometry) instruments
TC 214 Elevating work platforms
ISO/FDIS * Mobile elevating work platforms — Operator (driver) training 2013-04-27 18878 (Revision of ISO 18878:2004) JTC 1 Information technology
ISO/IEC FDIS * Information technology — Security techniques — Lightweight cryptography — Part 4: Mechanisms using 2013-04-23 29192-4 asymmetric techniques
ISO/IEC * Information technology — Generic coding of moving pictures and associated audio information: Video — 2013-04-12 13818- Part 2: — Amendment 1: Frame packing arrangement signalling for quincunx pattern 2/FDAmd 1
ISO/IEC * Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — 2013-04-05 15444- Amendment 6: Updated ICC profile support and resolution clarification 1:2004/FDAmd 6
ISO/IEC FDIS * Information technology — Multimedia framework (MPEG-21) — Part 20: Contract Expression Language 2013-04-05 21000-20
ISO/IEC * Information technology — MPEG systems technologies — Part 4: Codec configuration representation — 2013-04-05 23001- Amendment 1: RVC-CAL extensions 4:2011/FDAmd 1
ISO/IEC FDIS * Information technology — Media context and control — Part 5: Data formats for interaction devices 2013-04-23 23005-5 (Revision of ISO/IEC 23005-5:2011)