Copper Beryllium Fingerstock
ORDERING INFORMATION
When placing an order or requesting a quotation, please give part number, your required finish I.D. from the chart below, and required length.
PART NUMBER EXAMPLE: Stock Item Finish Code Length 11-S-32RH – SN – 16 The above example is the “Slot Mount Series” gasket shown on page 11. The height is .11 inch and the width is .32 inch. The “-S-” indicates a soft gasket. The “SN” indicates a bright tin finish. See list below for available finishes. This part is available in lengths of 16 inches. Consult factory for custom lengths or for availability in 25’ coils.
Available Plating Finishes: Finish Type Applicable Specifications Leader Tech Finish Code Bright Finish - BD Bright Tin ASTM B-545, CLASS A SN Satin/Matte Tin ASTM B-545, CLASS A ST Tin Lead ASTM B-579, SC2 SNpb Electro-less Nickel RoHS ASTM B-733, SC 1, CLASS 1 NI Zinc/Chromate Clear ASTM B-633, SC1, TYPE III Zinc Zinc/Chromate Yellow ASTM B-633, SC1, TYPE II ZincY Clear Cadmium Chromate ASTM B-766, CLASS 5, TYPE III CDC Standard plating finish is .0001 inch (.0025 mm) minimum. Yellow Cadmium Chromate ASTM B-766,CLASS 5, TYPE II CDY Plating processes and thicknesses may be varied Bright Silver ASTM B-700, TYPE 2, GRADE B, CLASS N AG to meet customer needs. Satin/Matte Silver ASTM B-700, TYPE 2, GRADE A, CLASS N MAG Standard plating finish for gold is 0.00005 inches. See Gold ASTM B-488, TYPE I, CODE C, CLASS 1.25 AU adjacent list of available finishes and consult factory for Solderable Unplated - SU additional options.
ADHESIVE MOUNTING OF FINGERSTOCK GASKETS
Leader Tech tape mounted CuBe gaskets offer pressure-sensitive, double-sided adhesive for strong bonding to a wide variety of surface conditions. Ideal for all-purpose contact strips used in metal cabinets and electronic enclosures and is unaffected by temperatures from -67 to +250°F (-55 to 121°C)
Simply follow these four easy steps: 1. Remove all grease and oily residue with a solvent such as isopropyl alcohol/water mixture (rubbing alcohol) or heptane. Dry and smooth the mounting surface with emery cloth if necessary. 2. Peal off the protective paper backing from the pressure sensitive adhesive tape. 3. Place the gasket in correct position. Press firmly to ensure a good bond to surface. Avoid repositioning, which might impair the effectiveness of the adhesive or may bend or kink the strip. NOTE: On strips where fingers cover the solid portion of the gasket, pressure may be applied by inserting a mandrel in the strip and pressing down. 4. At room temperature approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours, and 100% after 72 hours. In some cases, bond strength can be increased and ultimate bond strength can be achieved more quickly by exposure of the bond to elevated temperature, e.g., 150°F (66°C) for 1 hour.
6 Phone: 866.832.4364 Fax: 813.855.3291 Web: www.leadertechinc.com 4 3 2 1
4 3 2 1
D D Copper Beryllium Fingerstock
D D
ADHESIVE MOUNT SERIES
AH | Adhesive Mount Black = inches Blue = mm Comp = Compressed
C PART NUMBER A B C FINGER PITCH MAT. THICK COMP WIDTH COMP HEIGHT LENGTH FINGERS TAPE C
PITCH 11-32AH-XX-16 0.11 2.80 0.32 8.10 0.20 5.08 0.170 4.30 0.187 4.80 0.003 0.076 0.39 9.91 0.04 1.02 16 406 86 0.145 11-S-32AH-XX-16 0.11 2.80 0.32 8.10 0.20 5.08 0.1704 4.30 0.187 4.80 0.002 0.050 0.39 9.913 0.04 1.02 16 406 86 20.145 1 FINGER 4 3 2 1 13-37AH-XX-16 0.13 3.30 0.37 9.40 0.21 5.33 0.225 5.70 0.250 6.40 0.003 0.076 0.51 12.95 0.05 1.27 16 406 64 0.145 13-S-37AH-XX-16 0.13 3.30 0.37 9.40 0.21 5.33 0.225 5.70 0.250 6.40 0.002 0.050 0.51 12.95 0.05 1.27 16 406 64 0.145 C C 4 14-38AH-XX-16 0.14 3.56 0.38 39.65 0.20 5.08 0.343 8.71 0.375 9.53 0.004 0.1012 0.53 13.46 0.05 1.27 16 406 431 0.145 D D 22-60AH-XX-16 0.22 5.60 0.60 15.24 0.28 7.11 0.344 8.74 0.375 9.50 0.005 0.127 0.73 18.54 0.09 2.29 16 406 43 0.200 PITCH 22-S-60AH-XX-16 0.22 5.60 0.60 15.24 0.28 7.11 0.344 8.74 0.375 9.50 0.003 0.076 0.73 18.54 0.09 2.29 16 406 43 0.200 FINGER D 32-78AH-XX-16 D 0.32 8.10 0.78 19.80 0.45 11.43 0.344 8.74 0.375 9.50 0.004 0.101 0.98 24.89 0.12 3.05 16 406 43 0.375 D 32-S-78AH-XX-16 0.32 8.10 0.78 19.80 0.45 11.43 0.344 8.74 0.375 9.50 0.003 0.076 0.98 24.89 0.12 3.05 16 406 43 0.375 D
B B
MOUNTING The AH series gaskets are adhesive mounted general-purpose gaskets used in both compres- B OPTIONS sion and wiping applications. Sizes range from .11” (2.8mm) to .32” (8.1 mm) in height. ■ Tape Applications include electronic enclosures, shielded cabinets, and MRI chamber doors.
Directional Force A XX - Select material/finish (see page 6)
C C PSA TAPE C PITCH DOME TOP SERIES B B FINGER UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. The Dome Top Gaskets are known for their large surface.XXX .00 5area for electrical contact and smooth wiping action. Also B .XX .01 C PITCH available in a solid top profile allowing for omni-directional.X .1 AN Gwiping.LES 2 Together with the Slot Mount Series, the Dome Top C C GasketsC are a mainstay in the enclosure/chassis industries. Commonly mounted with adhesive tape. A CUST. NAME PREPARED DATE A FINGE4R THIS DOCUMENT CO3NTAINS PROPRIETARY INFORMATION 2 1 12/21/2007 A OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN DVG CUSTOMER DWG NO. QA DT | Dome Top PRIVATE EXPENSE, AND MAY NOT USED, Black = inches Blue = mm Comp G= ACompressedSKET, STYLE AH DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR FINISH ENG SIZE DWG NO REV H.T. TO 373 DPH A PSA TAPPARTE NUMBER A PROCUREMBENT WITHOUFINGERT THE WRITTEN PEPITCHRMISSION OFMAT. THICK4 COMP WIDTH COMP HEIGHT 3 LENGTHC 8FINGERS-S-21AH-XXTAPE-16 2 1 LEADERTECH. LEBADERTECH DOES NOT GUARANTEE OR MATERIAL SPEC SCALE FSCM NO. B WARRANTY THE PERFORMANCE CHARACTERISTICS. .0025 BeCu ALLOY 172 4J674 SHEET 1 OF 1 11-35DT-XX-15 0.11 2.79 0.35 8.89 0.169 4.29 0.187 4.75 0.003 0.076 0.38 9.65 0.06 1.52 15 381 80 0.100 B D 4 3 2 1 D 11-S-35DT-XX-15 0.11 2.79 0.35 8.89 0.169 4.29 0.187 4.75 0.002 0.050 0.38 9.65 0.06 1.52 15 381 80 0.100 D D 14-45DT-XX-15 0.14 3.56 0.45 11.40 0.228 5.79 0.250 6.35 0.003 0.076 0.51 13.0 0.07 1.78 15 381 60 0.100 A UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. 14-S-45DT-XX-15 0.14 3.56 0.45 11.40 0.228 5.79 0.250 6.35 0.002 0.050 0.51 13.0 0.07 1.78 15 381 60 0.100 .XXX .005 PSA TAPE C 4 3 .XX .01 2 22-62DT-XX-15 1 0.22 5.59 0.62 15.70 0.345 8.76 0.375 9.53 0.004 0.101 0.76 19.3 0.10 2.54 15 381 40 0.200 .X .1 ANGLES 2 22-S-62DT-XX-15 0.22 5.59 0.62 15.70 0.345 8.76 0.375 9.53 0.003 0.076 0.76 19.3 0.10 2.54 15 381 40 0.200 PITCH A CUST. NAME PREPARED BDATE A B THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION - B DJM 12/3/2008 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. FINGER OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN B .XXX .005 CUSTOMER DWG NO. QA LOW PROFILE SERIMOUNTINGES The Dome Top gaskets have fully independent fingers that are adhesive mounted. PRIVATE EXPENSE, AND MAY NOT USED, - OPTIONS .XX .01 B B Their smooth curve provides a large area for electrical contact and smooth .X .1 ANGLES 2 DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR ■ Tape FINISH ENG SIZE DWG NO REV wiping action. ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR A CUST. NAME PREPARED DATE A - A C PITCH THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION C C A 12/21/2007 PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF C 8-45-LPAH-XXDirectional-16 Force OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN DVG CUSTOMER DWG NO. QA MATERIAL SPEC SCALE FSCM NO. FINGER PRIVATE EXPENSE, AND MAY NOT USED, GASKET, STYLE AH D LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR XX - SelectD material/finish (see page 6) .0035 BeCu 172 SHEET 1 OF 1 DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR WARRANTY THE PERFORMANCE CHARACTERISTICS. 4J674 ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR FINISH ENG SIZE DWG NO REV PSA TAPE H.T. TO 373 DPH 4 3 2 PSA TAPE C 1 PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF C C 8-S-21AH-XX-16 A LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR MATERIAL SPEC SCALE FSCM NO. PITCH WARRANTY THE PERFORMANCE CHARACTERISTICS. .0025 BeCu ALLOY 172 4J674 SHEET 1 OF 1 DTS | Dome Top Solid 4 4 Black = inches3 3 Blue = mm Comp = Compressed 2 2 1 1 FINGER PART NUMBER A B FINGER PITCH UNMAT.LESS OTHICKTHERWISE SCOMPPECIFI EWIDTHD, DIMENSIONCOMPS ARE HEIGHTIN INCHES. LENGTH FINGERS TAPE .XXX .005 11-35DTS-XX-15 0.11 2.79 0.35 8.89 0.169 4.29 0.187 4.75 .XX0.003 .01 0.076 0.38 9.65 0.06 1.52 15 381 80 0.100 .X .1 ANGLES 2 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. D D A 11-S-35DTS-XX-15 0.11 2.79 0.35 8.89 0.169 4.29 0.187 B4.75 CUS0.002T. NAME 0.050 0.38 PREP9.65ARED 0.06 DAT1.52E 15 381 80 0.100 A B THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION .XXX ± .005 - DJM 3/31/2009 OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN B .XX .01 14-45DTS-XX-15 0.14 3.56 0.45 11.40 0.250 6.35 0.250 6.35 CUS0.003TOMER DW0.076G NO. 0.51 QA 13.0 0.07 1.78 15 381 DO60 ME TO0.100P SERIES PRIVATE EXPENSE, AND MAY NOT USED, - .X ± .1 ANGLES DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR 14-S-45DTS-XX-15 0.14 3.56 0.45 11.40 0.250 6.35 0.250 6.35 0.002 0.050 0.51 13.0 0.07 1.78 15 381 60 0.100 REV CUST. NAME PREPARED DATE ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR FINISH ENG SIZE DWG NO A A - PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF HEAT TREAT TO 373 DPH C 14-45DT-XX-15 22-62DTS-XX-15 0.22 LE5.59ADERTEC0.62H. LEA15.70DERTECH0.345 DOES NO8.76T GUAR0.375ANTEE O9.53R MAT0.004ERIAL SPE0.101C 0.76 19.3 0.10 2.54 15 SCAL381E FSCM N40O. 0.200 CUSTOMER DWG NO. ENGINEERING PSA TAPE A LPH, LOW PROFILE HOOK SERIES A WARRANTY THE PERFORMANCE CHARACTERISTICS. .0035 BeCu 172 4J674 SHEET 1 OF 1 - 22-S-62DTS-XX-15 0.22 5.59 0.62 15.70 0.345 8.76 0.375 9.53 0.003 0.076 0.76 19.3 0.10 2.54 15 381 40 0.200 4 3 2 1 CUSTOMER DWG NO.#2 MFG APPROVAL - SIZE DWBG NO REV B UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. B MOUNTING The Dome Top “Solid” Series gaskets have a strip that connects each finger along .XXX .005 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION FINISH QA APPROVAL OPTIONS .XX .01 OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN the top. This allows for unique angular wiping action without snagging. Other features .X .1 ANGLES 2 C PRIVATE EXPENSE, AND MAY NOT USED, - C 8-45LPH-060 A1 C DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR ■ Tape A CUST. NAME PREPARED DATE A are the same as the Dome Top Series. THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR - DJM 3/31/2009 MATERIAL SPEC SCALE FSCM NO. OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF CUSTOMER DWG NO. QA DOME TOP SERIES LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR SHEET 1 OF 1 PRIVATE EXPENSE, AND MAY NOT USED, A- WARRANTY THE PERFORMANCE CHARACTERISTICS. .0035" CuBe C17200 1/4 H 4J674 Directional Force DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR C ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR FINISH ENG SIZE DWG NO REV C A 4 3 2 1 XX - Select material/finish (see page 6) PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF HEAT TREAT TO 373 DPH C 14-45DT-XX-15 PITCH LEADERTECH. P LSEAD ETRATEPCEH DOES NOT GUARANTEE OR MATERIAL SPEC SCALE FSCM NO. WARRANTY THE PERFORMANCE CHARACTERISTICS. .0035 BeCu 172 4J674 SHEET 1 OF 1 4 3 2 1 FINGER
EMI Enclosure Shielding Solutions 9
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. .XXX .005 .XX .01 .X .1 ANGLES 2
A CUST. NAME PREPARED DATE A THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION 5/10/2010 OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN DJM CUSTOMER DWG NO. QA PRIVATE EXPENSE, BAND MAY NOT USED, GASKET, SOLID DOME TOBP B DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR FINISH ENG SIZE DWG NO REV PITCH PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF C 14-45DTS-XX-XX-MFG A LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR MATERIAL SPEC SCALE FSCM NO. A B WARRANTY THEB PERFORMANCE CHARACTERISTICS. .0035 BeCu ALLOY 25 HEAT TREAT TO 373 DPH 4J674 SHEET 1 OF 1 FINGER 4 B 3 2 1 PSA TAPE
D A UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. .XXX .005 .XX .01 C .X .1 ANGLES 2
A CUST. NAME PREPARED DATE A THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION 5/10/2010 OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN DJM CUSTOMER DWG NO. QA PRIVATE EXPENSE, AND MAY NOT USED, GASKET, SOLID DOME TOP DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR FINISH ENG SIZE DWG NO REV A UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF C 14-45DTS-XX-XX-MFG LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR MATERIAL SPEC SCALE FSCM NO. .XXX ± .005 WARRANTY THE PERFORMANCE CHARACTERISTICS. .0035 BeCu ALLOY 25 HEAT TREAT TO 373 DPH 4J674 SHEET 1 OF 1 4 3 2 1 .XX .01 .X ± .1 ANGLES CUST. NAME PREPARED DATE - M. Paul 1/23/2009 CUSTOMER DWG NO. ENGINEERING A THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION - GASKET, PCI SERIES A OWNED BY LEADERTECH, OR DEVELOPED AT IT'S OWN CUSTOMER DWG NO.#2 MFG APPROVAL PRIVATE EXPENSE, AND MAY NOT USED, - DUPLICATED OR DISCLOSED IN WHOLE OR IN PART FOR SIZE DWG NO REV ANY PURPOSE INCLUDING DESIGN, MANUFACTURE OR FINISH QA APPROVAL PROCUREMENT WITHOUT THE WRITTEN PERMISSION OF - C 8-19PCI-XX-XX A LEADERTECH. LEADERTECH DOES NOT GUARANTEE OR MATERIAL SPEC SCALE FSCM NO. WARRANTY THE PERFORMANCE CHARACTERISTICS. .002 BeCu 172 4J674 SHEET 1 OF 1 4 3 2 1