DOCSLIB.ORG

EZ Series Touch Panel Software Manual Manual Part Number EZ-PANELEDIT Revision a the Most Sensible Automation Products Direct from the Factory

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
EZ Series Touch Panel Software Manual Manual Part Number EZ-PANELEDIT Revision a the Most Sensible Automation Products Direct from the Factory EZ Series Touch Panel Software Manual Manual Part Number EZ-PANELEDIT Revision A The Most Sensible Automation Products Direct From the Factory EZ Series Touch Panel Software Manual Manual Part Number EZ-PANELEDIT Revision A WARNING! Programmable control devices such as EZ Series Touch Panel are not fail-safe devices and as such must not be used for stand-alone protection in any application. Unless proper safeguards are used, unwanted start-ups could result in equipment damage or personal injury. The operator must be made aware of this hazard and appropriate precautions must be taken. In addition, consideration must be given to the use of an emergency stop function that is in dependent of the programmable controller. The diagrams and examples in this user manual are included for illustrative purposes only. The manufacturer cannot assume responsibility or liability for actual use based on the diagrams and examples. CAUTION Do not press the EZ Series Touch Panel touchscreen with any sharp objects. This practice may damage the unit beyond repair. Trademarks This publication may contain references to products produced and/or offered by other companies. The product and company names may be trademarked and are the sole property of their respective owners. EZ Automation disclaims any proprietary interest in the marks and names of others. Manual Part Number EZ-PANELEDIT © Copyright 2005, EZAutomation All Rights Reserved No part of this manual shall be copied, reproduced, or transmitted in any way without the prior writ- ten consent of EZAutomation. EZAutomation retains the exclusive rights to all information included in this document. Designed and Built by AVG 4140 Utica Ridge Rd. • Bettendorf, IA 52722-1327 Marketed by EZAutomation 4140 Utica Ridge Road • Bettendorf, IA 52722-1327 Phone: 1-877-774-EASY • Fax: 1-877-775-EASY • www.EZAutomation.net EZ-PANELEDIT Touch Panel Programming Software User Manual Table of Contents EU Information............................................................................................................................................ix EZ Series Touch Panel Editor .....................................................................................................................x Compatibility of Software ......................................................................................................................x EZ Series Touch Panel Editor Enhancements ......................................................................................x Enhancement for AB Drivers ................................................................................................................xi New PLC/Drivers added ......................................................................................................................xi Chapter 1 Manual Organization ...................................................................................................................................2 Introduction ..................................................................................................................................................3 What you need to get started ......................................................................................................................3 Hardware ..............................................................................................................................................3 Software ................................................................................................................................................3 Need HELP?................................................................................................................................................4 Onscreen HELP ....................................................................................................................................4 Fly-Over HELP ......................................................................................................................................4 PLC HELP .............................................................................................................................................4 Technical Support .................................................................................................................................4 Warranty Repairs ..................................................................................................................................4 Out of Warranty Repairs .......................................................................................................................4 EZ Series Touch Panel Models ...................................................................................................................5 6-inch Monochrome Models .................................................................................................................5 6-inch Color Models ..............................................................................................................................6 8-inch Color Models ..............................................................................................................................7 10-inch and 15-inch Models ..................................................................................................................8 Features ................................................................................................................................................9 PLCs Supported by EZ Series Touch Panel ..............................................................................................10 PLC Cable Part Numbers ..........................................................................................................................11 ............................................................................................................................................................... EZ Series Touch Panel Editor Programming Software ..............................................................................12 Installing the Software .........................................................................................................................12 Installation Screens .............................................................................................................................12 EZLaunch Pad ...........................................................................................................................................15 Chapter 2 Tutorial — Configure PLC .........................................................................................................................18 Tutorial — Create a Project .......................................................................................................................19 Step 1 ..................................................................................................................................................19 Step 2 ..................................................................................................................................................21 Step 3 ..................................................................................................................................................28 Chapter 3 Project Setup .............................................................................................................................................32 Decide now if you want to work ON-LINE or OFF-LINE... ..................................................................32 Step 1 Project Information .................................................................................................................33 SELECT ACTION .........................................................................................................................33 Edit Program OFF-LINE (Write to Panel Later) ......................................................................33 Read Program from Panel and Edit OFF-LINE ......................................................................35 Edit Program ON-LINE...........................................................................................................36 A QUICK REVIEW for “ENTER PROJECT INFORMATION” .......................................................37 Step 2 Design Your Screens ...............................................................................................................39 Step 3 Write Your Program to Panel ...................................................................................................41 iv Touch Panel Programming Software User Manual Chapter 4 Objects Menu ............................................................................................................................................44 Button Object ......................................................................................................................................46 Protection Tab ...............................................................................................................................48 Visibility/Details Tab ......................................................................................................................50 Indicator Button Object .......................................................................................................................51 Radio Buttons Object ..........................................................................................................................53 Switch Object
Load more

Recommended publications
  • Total Control Products, Inc
    Allen-Bradley Allen-Bradley SLC 500 Setup for using an A-B SLC 500 Use the following procedure to ensure your target device is setup properly for the Allen-Bradley SLC 500. The procedure is in condensed format. Only the required settings are outlined. For additional details, see Creating a New Project beginning on page 3. Project Setup The drawing is a diagram of the Project Setup dialog box. Each button will display an additional dialog box. Many settings are options and are not required to establish communications. Verify the Project name and Display Device Model are correct. Leave the Initial Screen name blank. Project Setup Project Notes Project name: Project name appears in this field More Disable Beeper Display Device Model Model description appears in this field Default Panel Name Initial Screen Print (Inactive) Screen Saver Timeout Display Touch Print PLC Protocol setup PLC & Protocols Panel Trigger Tag Electrical Format CN1 PLC Type PLC Protocol name appears here Watchdog Tag Serial Parameters Watchdog timeout Port Protocol System OK Cancel Help PLC Type Select the PLC type from the list box. (AB SLC DH485). See PLC Type on page 5. QUICKDESIGNER Allen-Bradley • 11 Port Button Click the Port button to display the Serial Parameters dialog. The port values are automatically set to standard default values. See Serial Parameters on page 6. The following settings are recommended for AB SLC DH485. Elect. Format RS422 Half Duplex (When using the HMI-CAB-C83 Cable) or Elect. Format RS232 (When using the HMI-CAB-C84 Cable) Baud Rate 19200 Data Bits 8 Parity Even Stop Bits 1 Handshake None Protocol Button Click the Protocol button to display the dialog box associated with the selected PLC.
    [Show full text]
  • THE FINS PROTOCOL for COMPLEX INDUSTRIAL APPLICATTIONS a Case Study
    THE FINS PROTOCOL FOR COMPLEX INDUSTRIAL APPLICATTIONS A Case Study Júlio Costa, Nuno Carvalho Industrial Electronics Department/ALGORITMI, University of Minho, Guimarães, Portugal Filomena Soares Industrial Electronics Department/ALGORITMI, University of Minho, Guimarães, Portugal José Machado Mechanical Engineering Department/CT2M, University of Minho, Guimarães, Portugal Keywords: Complex Control Systems, Industrial networks, Industrial protocols, PLCs networks. Abstract: This paper presents a comparative approach on the use of different industrial networks configurations and industrial communication protocols. Some aspects, that may influence the right choice of the most indicated protocol for each industrial network configuration, are discussed. It is presented a case study and two configurations networks implementing two industrial communication protocols. The respective advantages and disadvantages are presented. All the detailed aspects including the data exchange are presented too. The obtained results are extrapolated for other similar industrial applications. 1 INTRODUCTION objective for all the companies in general and for the Portuguese companies, in particular. This works appears on the context of developing and In order to facilitate the management and control implementing new solutions for industrial networks of manufacturing processes it is, currently, very implementation. This line of research is being important the flexibility of the implemented developed by a team from the School of Engineering management and control systems for the of University of Minho and involves some manufacturing processes. For that accomplishment, departments of the School. it is necessary a fast access at the information, The first results, here presented, are the first one means that allow a fast decisions according the obtained from an initial study that it is intended to be manufacturing process behavior and, more more complex and exhaustive.
    [Show full text]
  • Chapter 4: Configuration and Connections DL05 System Design Strategies I/O System Configurations the DL05 Plcs Offer a Number of Different I/O Configurations
    CONFIGURATION AND CCHAPTERHAPTER CONNECTIONS 44 In This Chapter... In this Chapter ........................................................................................................... 4-1 DL05 System Design Strategies ................................................................................ 4-2 Network Configuration and Connections ................................................................. 4-4 Network Slave Operation .......................................................................................... 4-8 Network Master Operation ..................................................................................... 4-14 Chapter 4: Configuration and Connections DL05 System Design Strategies I/O System Configurations The DL05 PLCs offer a number of different I/O configurations. Choose the configuration that is right for your application, and keep in mind that the DL05 PLCs offer the ability to add an I/O card in the option slot. Although remote I/O isn’t available, there are several option cards available. For instance: • Various A/C and Dv/C I/O modules • Combination I/O modules • Analog I/O modules • Combination Analog I/O modules A DL05 system can be developed with an arrangement using a selected option modules. See our DL05/06 Options Modules User Manual (D0-OPTIONS-M) on the website, www.automationdirect.com for detailed selection information. Networking Configurations The DL05 PLCs offers the following ways to add networking: • Ethernet Communications Module s connects a DL05 to high-speed peer-to-peer networks.
    [Show full text]
  • Oferta Wzorzec
    Competency in control and production management systems ASIX Reference List Edition October 2013 ASKOM Spółka z o.o. POLAND 44-100 GLIWICE ul. Józefa Sowińskiego 13 tel. (+48 32) 30-18-100 / fax. (+48 32) 30-18-101 KRS 0000125971, Regional Court Gliwice Tax Identification No. 648-00-11-359 Board of Directors President dr inż. Marian Konsek Vice-president mgr inż. Aleksander Rybarek Stock capital 158.000,- PLN ASIX REFERENCE LIST ASKOM, Gliwice Table of contents: A. PRODUCTION MANAGEMENT SYSTEMS - MES ................................................................................................................................................................................................................. 2 B. PRODUCTION MANAGEMENT SYSTEMS - BALANCE OF ENERGETIC MEDIA............................................................................................................................................................ 4 C. FOOD INDUSTRY ....................................................................................................................................................................................................................................................................... 6 D. DAIRIES ..................................................................................................................................................................................................................................................................................... 11 E. CHEMICAL INDUSTRY ..........................................................................................................................................................................................................................................................
    [Show full text]
  • Automationdirect-D2u
    DL205 User Manual Volume 1 of 2 D2–USER–M WARNING Thank you for purchasing automation equipment from Automationdirect.com, doing business as AutomationDirect. We want your new DirectLOGIC automation equipment to operate safely. Anyone who installs or uses this equipment should read this publication (and any other relevant publications) before installing or operating the equipment. To minimize the risk of potential safety problems, you should follow all applicable local and national codes that regulate the installation and operation of your equipment. These codes vary from area to area and usually change with time. It is your responsibility to determine which codes should be followed, and to verify that the equipment, installation, and operation are in compliance with the latest revision of these codes. At a minimum, you should follow all applicable sections of the National Fire Code, National Electrical Code, and the codes of the National Electrical Manufacturer’s Association (NEMA). There may be local regulatory or government offices that can also help determine which codes and standards are necessary for safe installation and operation. Equipment damage or serious injury to personnel can result from the failure to follow all applicable codes and standards. We do not guarantee the products described in this publication are suitable for your particular application, nor do we assume any responsibility for your product design, installation, or operation. Our products are not fault–tolerant and are not designed, manufactured or intended for use or resale as on–line control equipment in hazardous environments requiring fail–safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of the product could lead directly to death, personal injury, or severe physical or environmental damage (”High Risk Activities”).
    [Show full text]
  • Motion & Drives
    GENERAL CATALOGUE 2004 Motion & Drives Motion & Drives • Motion Controllers • Servo Systems • Frequency Inverters • Software Advanced Industrial Automation 2004 Cat. No. Y203-EN2-01 DRIVES WELCOME TO OMRON-YASKAWA´S WORLD OF MOTION WE MAKE IT EASY With over 100 years of experience in motion and automation manufacturing between them, Omron and Yaskawa offer the best in class solutions. Omron, with its proven pioneering tech- nologies in sensing and control and Yaskawa with its leading edge technology in servo and inverter technology and robotics, make it your safest option for a reliable and long term part- nership. Omron-Yaskawa will also support your global business through a network of over 200 offices world-wide. Welcome to Omron´s motion and drives catalogue, a world of innovation. 1 2 Product Positioning 30 Product Selection Table 33 Catalogue Content n o i Servo Based Motion Control MCW151 t a Continuous Path Control XtraDrive c i l Electronic CAMs Machatrolink II Sigma II MCH pp Advanced Motion Control 30 axes Series A Multiaxes synchronisation PLC Based Motion Control Analogue Control MC402 4 axes Point to Point Positioning Smart Feed Equipment PLC Based Positioning CJ1W-NC Indexers Step Winders Dedicated to Lifts Lifts Cranes L7 F7 Extruders Wide power range of Pumps, fans E7 Compressors Inverter PLC Linear Motors Door controllers Palletisers MV Rotary Motors Basic Positioning Conveyors Low Power J7 Controller Pumps & Fans in the Drive Basic Dynamic Process Precise Motion Precise Continuos Path Control Speed Speed Control Torque Controller Positioning Control Control Control Control Frequency inverters Motion AC Servo Systems 2 3 Advanced Industrial Automation Product Features MOTION & DRIVES: SCALABLE, FLEXIBLE, EASY AND ABOVE ALL, RELIABLE Motion controllers: Machine flexibility & scalabil- etc.
    [Show full text]
  • Product Brochure 2009.Indd
    37 AustraliaAus BelgiumBel CanadaCan CzechCze Republic ChinaChi Trio Motion Technology Ltd. ColombiaCol Shannon Way, Tewkesbury, Glos. GL20 8ND. UK DenmarkDen Tel: +44 1684 292333 FranceFra Fax: +44 1684 297929 Email: [email protected] GermanyGer Website: www.triomotion.com GreeceGre IndiaIndiaIndi IrishIrishIris RepublicRepublic Trio Motion Technology LLC IsraelIsraelIsra 1000 Gamma Drive, Suite 206, Pittsburgh PA 15238, USA Tel: +1 412 968 9744 ItalyItalyItal Fax: +1 412 968 9746 KoreaKor Email: [email protected] NetherlandsNet Website: www.triomotion.com NewNew Zealand NorwayNor Trio Shanghai Poland PolandPol Tompson Centre RomaniaRom 118 Zhang Yang Road, B1701, SingaporeSing Pudong New Area, Shanghai, 200122, CHINA SouthSou Africa Tel/Fax: +86-21-58797659 SlovakSlov Republic mail: [email protected] Website: www.triomotion.com SloveniaSlov SpainSpa SwedenSwe SwitzerlandSwi ThailandTha TaiwanTaiw TurkeyTur UnitedUni Kingdom USAUSA PRODUCT BROCHURE version 2-product brochure-2009 CONTENTS 1 THE TRIO CONCEPT 2 TRIO VALUE 3 TRIO SOFTWARE 6 SYSTEM BUILDING 11 MOTION COORDINATORS MC302X 12 MC206X 14 MC464 16 PCI208 22 EURO205x 24 EURO209 26 MC302-K 28 ANCILLARY RANGE AXIS DAUGHTER BOARDS 30 DIGITAL DRIVE DAUGHTER BOARDS 32 FIELDBUS DAUGHTER BOARDS 33 CABLES AND ACCESSORIES 34 THE TRIO NETWORK 36 ©Trio Motion Technology 2009. All Trademarks are acknowledged. Specifi cations may be subject to change without notice. E & O.E. THE TRIO CONCEPT 2 Trio Motion Technology’s range of Motion Coordinators, All Motion Coordinators, whether PCI, panel mount, daughter boards, I/O modules and keypads are designed to rack mount, DIN-rail mount or a custom design format*, enable the control of industrial machines with the minimum incorporate a CANbus interface to allow for digital or of external components.
    [Show full text]
  • The Internet of Things in the Cloud
    Zhou Zhou Electrical EngineeringElectrical / Digital Engineering & Wireless / DigitalCommunications & Wireless Communications This book brings togetherThis book timely, brings thought together provoking, timely, thoughtand comprehensive provoking, and comprehensive materials to give youmaterials a better understandingto give you a better of the understanding IoT/M2M technological of the IoT/M2M and technological and TheThe business landscape businesson top of landscape Cloud computing on top of … Cloud . I also computing believe this… . book,I also believe this book,The The which I highly recommend,which I highlyis the firstrecommend, on the marketis the firstthat coverson the almostmarket allthat of covers almost all of the related subjects.the related subjects. InternetInternet Things Things —George (Aiping) —GeorgeGuo, PhD, (Aiping) CEO ofGuo, TCL PhD, Communication CEO of TCL Technology Communication Technology Holdings Ltd. Holdings Ltd. of of Although the InternetAlthough of Things the (IoT)Internet is aof vast Things and dynamic(IoT) is a territory vast and that dynamic is territory that is Internet Internet evolving rapidly, thereevolving has been rapidly, a need there for hasa book been that a need offers for a aholistic book thatview offers of a holistic view of in the in Cloudthe Cloud the technologies andthe applications technologies of theand entireapplications IoT spectrum of the .entire Filling IoT this spectrum void, . Filling this void, The Internet of ThingsThe Internetin the Cloud: of Things A Middleware in the Cloud:
    [Show full text]
  • DL05 Micro PLC User Manual Volume 1 of 2
    DL05 Micro PLC User Manual Volume 1 of 2 Manual Number: D0-USER-M Notes WARNING Thank you for purchasing automation equipment from Automationdirect.com®, doing business as AutomationDirect. We want your new automation equipment to operate safely. Anyone who installs or uses this equipment should read this publication (and any other relevant publications) before installing or operating the equipment. To minimize the risk of potential safety problems, you should follow all applicable local and national codes that regulate the installation and operation of your equipment. These codes vary from area to area and usually change with time. It is your responsibility to determine which codes should be followed, and to verify that the equipment, installation, and operation is in compliance with the latest revision of these codes. At a minimum, you should follow all applicable sections of the National Fire Code, National Electrical Code, and the codes of the National Electrical Manufacturer's Association (NEMA). There may be local regulatory or government offices that can also help determine which codes and standards are necessary for safe installation and operation. Equipment damage or serious injury to personnel can result from the failure to follow all applicable codes and standards. We do not guarantee the products described in this publication are suitable for your particular application, nor do we assume any responsibility for your product design, installation, or operation. Our products are not fault-tolerant and are not designed, manufactured or intended for use or resale as on- line control equipment in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of the product could lead directly to death, personal injury, or severe physical or environmental damage ("High Risk Activities").
    [Show full text]
  • Remotely Connected Secure Remote Monitoring for Internet of Things Applications Table of Contents
    WHITE PAPER REMOTELY CONNECTED SECURE REMOTE MONITORING FOR INTERNET OF THINGS APPLICATIONS TABLE OF CONTENTS INTRODUCTION 3 ANATOMY OF AN IOT SECURE REMOTE MONITORING SOLUTION 4 ARUBA IOT REMOTE MONITORING SOLUTIONS 8 USE CASES 14 CONCLUSION 20 REFERENCES 20 WHITE PAPER REMOTELY CONNECTED INTRODUCTION Once data visibility and security have been achieved we can In a provocative 2015 report, Gartner analysts Karamouzis, begin to reap the business benefits of IoT.5 For example, IoT Jivan, and Notardonato opined that the rise of smart data can drive profitability by helping merchants better machines, cognitive technologies, and algorithmic business understand customers and their preferences. IoT can also models could render obsolete the competitive advantage of enhance productivity through process improvement, and the offshoring.1 Hyper-automation, the analysts argued, will trump empowerment of the people who run them.6 labor arbitrage in driving profitability and enhancing The Internet of Things Value Cycle (Figure 1) shows the interplay productivity. Smart machines will accomplish this by between visibility, security, profitability, and productivity. classifying content, finding patterns, and extrapolating Achieving adequate visibility and security are critical challenges generalizations from those patterns. The eyes and ears of for most IoT deployments and organizations. smart machines will be the Internet of Things (IoT), the so-called “digital mesh,” which will be given voice by secure A simple case in point shows why. Operational technology connectivity infrastructure.2, 3 (OT) data are rich with insights about processes and device performance. Having access to these data could enhance a Labor arbitrage aside, there is no denying the central role of variety of applications and services including, among others, IoT on the journey to run businesses more efficiently, supply chain efficiency, inventory management, and predictive productively, and profitably.
    [Show full text]
  • Chapter 4: System Design and Configuration DL06 System Design Strategies I/O System Configurations the DL06 Plcs Offer a Number of Different I/O Configurations
    HAPTER SYSTEM DESIGN AND CCHAPTER CONFIGURATION 44 In This Chapter... DL06 System Design Strategies ................................................................................4–2 Module Placement .....................................................................................................4–3 Power Budgeting .......................................................................................................4–5 Configuring the DL06’s Comm Ports ........................................................................4–7 Connecting to MODBUS and DirectNET Networks ..................................................4–9 Non–Sequence Protocol (ASCII In/Out and PRINT) ...............................................4–11 Network Slave Operation ........................................................................................4–12 Network Master Operation .....................................................................................4–17 Network Master Operation (using MRX and MWX Instructions) .........................4–22 Chapter 4: System Design and Configuration DL06 System Design Strategies I/O System Configurations The DL06 PLCs offer a number of different I/O configurations. Choose the configuration that is right for your application, and keep in mind that the DL06 PLCs offer the ability to add I/O with the use of option cards. Although remote I/O isn’t available, there are many option cards available. For instance: • Various A/C and D/C I/O modules • Combination I/O modules • Analog I/O modules • Combination Analog
    [Show full text]
  • Design, Enterprise Implementation, Experience Jayakumar Vk, Kasi Viswanathan U, Kannan Sankar Sensor to Software Innovations Lab, TATA Consultancy Services, Chennai
    International Journal of Engineering Trends and Technology (IJETT) – Volume 29 Number 7- November 2015 Smart Gateway Reference Architecture for Industrial Internet of Things- Design, Enterprise Implementation, Experience Jayakumar Vk, Kasi Viswanathan U, Kannan Sankar Sensor to Software Innovations Lab, TATA Consultancy Services, Chennai cloud. IoT enables any real world object to participate Abstract— The Internet of things(IoT) enables to connect in the Internet. Advancements in both data acquisition and control various assets and enables to transfer the data over a network without requiring human-to-human or and control such as more accurate and efficient sensors human-to-computer interaction by providing unique and actuators as well as significant advancements in identifiers in cloud(public or non-public). There are sensors data processing made available due to faster and and data collectors required when there is a need to cheaper processing units has made the possibility of a communicate between the physical and the software world of networked, intelligent devices a very real environment. IoT is about controlling devices, that need possibility. Though initially designed in the context of remote monitoring and analytics enabled control to share the relevant data on cloud. The current communication supply chain management, IoT has been covering an focusses on challenges to build a generic gateway reference entire spectrum of applications like healthcare, utilities, solution that can accommodate various protocols, open and transport etc. [4]. To realize an efficient, secure, propitiatory, without comprising on security and safety. scalable IoT vision, a universal gateway that connects Though there are many mechanisms to push the data to the things is essential.
    [Show full text]