Oven Glove and Pot Holder

Oven Glove Materials Design pieces 1a, 1b, 2a, 2b Cutaway Stabilizer Use this method for these pieces

Use Plain Cotton Fabric for pieces 1a and 2a Heatex Batting or Heat Proof Batting Use Printed Cotton Fabric for pieces 1b and 2b

Hoop 1 layer of cutaway stabilizer. Stitch the first color of the design. Place a Plain Cotton Fabric piece of Heat Proof Batting and a piece of fabric on the stitched area. Stitch the rest of the design leaving the last two colors unstitched. Place a piece of Printed Cotton Fabric plain cotton fabric onto the underside of the hoop. Stitch the second to last color. Remove hoop from machine a trim away excess fabric from both sides Ribbon for Pot Holder of the hoop. Stitch the last color. Cut the design out of the stabilizer. Loop

Use a zig zag stitch on your sewing machine. Stitch the top half to the bottom half for both the plain and printed pieces. Put the pieces together with right sides out and sew together along the edge leaving the base of the glove open

Stitch design pieces 3a and 3b 3a uses plain fabric 3b uses printed fabric

Hoop 1 layer of cutaway stabilizer. Stitch the first color of the design. Place a piece of Heat Proof Batting and a piece of fabric on the stitched area. Stitch the rest of the design leaving the last two colors unstitched. Stitch the second to last color. Remove hoop from machine a trim away excess fabric from the design. Stitch the last color. Cut the design out of the stabilizer.

Use a zig zag stitch on your sewing machine. Cut a piece of ribbon 4 inches long. Fold in half and stitch to the stabilizer side of the printed fabric piece. Put the plain and printed fabric design pieces together, right sides facing out and stitch along the edges.