Standards Manager Web Standards List CENELEC-European Committee for Electrotechnical Standardization

Id Number Title Year Organization Page 1 EN 45554 General methods for the assessment of the ability to repair, reuse and upgrade energy-related products 2020 CENELEC 2 EN 50090-5-1 Home and Building Electronic Systems (HBES) - Part 5-1: Media and media dependent layers - Power line for HBES Class 2020 CENELEC 1 3 EN 50090-5-2 Home and Building Electronic Systems (HBES) Part 5-2: Media and media dependent layers - Network based on HBES 2020 CENELEC Class 1, Twisted Pair 4 EN 50119 Railway applications - Fixed installations - Electric traction overhead contact lines 2020 CENELEC 5 EN 50131-2-4 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave 2020 CENELEC detectors 6 EN 50131-13 Alarm systems - Intrusion and hold-up systems - Part 13: Pyrotechnic Obscuration Security Devices 2020 CENELEC 7 EN 50212 Connectors for thermoelectric sensors 2020 CENELEC 8 EN 50305 Railway applications - Railway rolling stock cables having special fire performance - Test methods 2020 CENELEC 9 EN 50306-1 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1: General 2020 CENELEC requirements 10 EN 50306-2 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2: Single core cables 2020 CENELEC 11 EN 50306-3 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3: Single core and 2020 CENELEC multicore cables screened and thin wall sheathed 12 EN 50306-4 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4: Multicore and 2020 CENELEC multipair screened or not screened sheathed cables 13 EN 50341-2-1 Overhead electrical lines exceeding AC 1 kV - Part 2-1: National Normative Aspects (NNAs) for Austria 2020 CENELEC 14 EN 50342-4 Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles 2020 CENELEC 15 EN 50367 Railway applications - Fixed installations and rolling stock - Criteria to achieve technical compatibility between 2020 CENELEC pantographs and overhead contact line 16 EN 50397-1 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 2020 CENELEC kV AC - Part 1: Covered conductors 17 EN 50520 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground 2020 CENELEC installations 18 EN 50546 Railway applications - Rolling Stock - Three-phase shore (external) supply system for rail vehicles and its connectors 2020 CENELEC 19 EN 50600-4-6 Information technology - Data centre facilities and infrastructures - Part 4-6: Energy Reuse Factor 2020 CENELEC 20 EN 50600-4-7 Information technology - Data centre facilities and infrastructures - Part 4-7: Cooling Efficiency Ratio 2020 CENELEC 21 EN 50614 Requirements for the preparing for re-use of waste electrical and electronic equipment 2020 CENELEC 22 EN 50678 General procedure for verifying the effectiveness of the protective measures of electrical equipment after repair 2020 CENELEC 23 EN 50708-1-1 Power transformers - Additional European requirements: Part 1- 1: Common part - General requirements 2020 CENELEC 24 EN 50708-2-1 Power transformers - Additional European requirements: Part 2- 1 Medium power transformer - General requirements 2020 CENELEC 25 EN 50708-3-1 Power transformers - Additional European requirements: Part 3-1 Large power transformer - General requirements 2020 CENELEC 26 EN 61482-2 Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements 2020 CENELEC 27 EN 62552-1 Household refrigerating appliances - Characteristics and test methods - Part 1: General requirements 2020 CENELEC 28 EN 62552-2 Household refrigerating appliances - Characteristics and test methods - Part 2: Performance requirements 2020 CENELEC 29 EN 62552-3 Household refrigerating appliances - Characteristics and test methods - Part 3: Energy consumption and volume 2020 CENELEC 30 EN 62841-4-1 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: 2020 CENELEC Particular requirements for chain saws 31 EN IEC 55036 Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the 2020 CENELEC protection of off-board receivers below 30 MHz 32 EN IEC 60034- Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC 2020 CENELEC 2-3 motors 33 EN IEC 60034- Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or 2020 CENELEC 3 combustion gas turbines and for synchronous compensators 34 EN IEC 60034- Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines 2020 CENELEC 5 (IP code) - Classification 35 EN IEC 60045- Steam turbines - Part 1: Specifications 2020 CENELEC 1 36 EN IEC 60068- Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for 2020 CENELEC 3-7 tests A (Cold) and B (Dry heat) (with load) 37 EN IEC 60076- Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings 2020 CENELEC 22-7 38 EN IEC 60076- Power transformers - Part 24: Specification of voltage regulating distribution transformers (VRDT) 2020 CENELEC 24 39 EN IEC 60086- Primary batteries - Part 6: Guidance on environmental aspects 2020 CENELEC 6 40 EN IEC 60098 Analogue audio disk records and reproducing equipment 2020 CENELEC 41 EN IEC 60112 Method for the determination of the proof and the comparative tracking indices of solid insulating materials 2020 CENELEC 42 EN IEC 60118- Electroacoustics - Hearing aids - Part 13: Requirements and methods of measurement for electromagnetic immunity to 2020 CENELEC 13 mobile digital wireless devices 43 EN IEC 60120 Ball and socket couplings of string insulator units - Dimensions 2020 CENELEC 44 EN IEC 60263 Scales and sizes for plotting frequency characteristics and polar diagrams 2020 CENELEC 45 EN IEC 60268- Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index 2020 CENELEC 16 46 EN IEC 60268- Sound system equipment - Part 22: Electrical and mechanical measurements on transducers 2020 CENELEC 22 47 EN IEC 60282- High-voltage fuses - Part 1: Current-limiting fuses 2020 CENELEC 1 48 EN IEC 60282- High-voltage fuses - Part 4: Additional testing requirements for high-voltage expulsion fuses utilizing polymeric insulators 2020 CENELEC 4 49 EN IEC 60296 Fluids for electrotechnical applications - Mineral insulating oils for electrical equipment 2020 CENELEC 50 EN IEC 60317- Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire 2020 CENELEC 0-2 51 EN IEC 60317- Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish 2020 CENELEC 0-4 impregnated, bare or enamelled rectangular copper wire 52 EN IEC 60317- Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish 2020 CENELEC 0-6 impregnated, bare or enamelled round copper wire 53 EN IEC 60317- Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120 2020 CENELEC 12 54 EN IEC 60317- Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 2020 CENELEC 17 55 EN IEC 60317- Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120 2020 CENELEC 18 56 EN IEC 60317- Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide 2020 CENELEC 25 enamelled round aluminium wire, class 200 57 EN IEC 60317- Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire 2020 CENELEC 27-1 58 EN IEC 60317- Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminium wire 2020 CENELEC 27-2 59 EN IEC 60317- Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire 2020 CENELEC 27-4 60 EN IEC 60317- Specifications for particular types of winding wires - Part 60-1: Polyester glass-fibre wound fused, unvarnished, bare or 2020 CENELEC 60-1 enamelled rectangular copper wire, temperature index 155 61 EN IEC 60317- Specifications for particular types of winding wires - Part 60-2: Polyester glass-fibre wound, resin or varnish impregnated, 2020 CENELEC 60-2 bare or enamelled rectangular copper wire, temperature index 155 62 EN IEC 60317- Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated, 2020 CENELEC 61 bare or enamelled rectangular copper wire, temperature index 180 63 EN IEC 60317- Specifications for particular types of winding wires - Part 62: Polyester glass-fibre wound, silicone resin or varnish 2020 CENELEC 62 impregnated, bare or enamelled rectangular copper wire, temperature index 200 64 EN IEC 60317- Specifications for particular types of winding wires - Part 70-2: Polyester glass-fibre wound resin/varnish impregnated, 2020 CENELEC 70-2 bare or enamelled round copper wire, temperature index 155 65 EN IEC 60317- Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound and resin or varnish impregnated, 2020 CENELEC 71 bare or enamelled round copper wire, temperature index 180 66 EN IEC 60317- Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound silicone resin/varnish 2020 CENELEC 72 impregnated, bare or enamelled round copper wire, temperature index 200 67 EN IEC 60317- Specifications for particular types of winding wires - Part 82: Polyesterimide enamelled rectangular copper wire, class 200 2020 CENELEC 82 68 EN IEC 60335- Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for 2020 CENELEC 2-71 breeding and rearing animals 69 EN IEC 60335- Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning 2020 CENELEC 2-87 equipment 70 EN IEC 60352- Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods 2020 CENELEC 3 and practical guidance 71 EN IEC 60352- Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test 2020 CENELEC 4 methods and practical guidance 72 EN IEC 60352- Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance 2020 CENELEC 5 73 EN IEC 60372 Locking devices for ball and socket couplings of string insulator units - Dimensions and tests 2020 CENELEC 74 EN IEC 60384- Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric 2020 CENELEC 13 metal foil DC capacitors 75 EN IEC 60401- Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and 2020 CENELEC 1 reference of dimensions 76 EN IEC 60404- Magnetic materials - Part 7: Method of measurement of the coercivity (up to 160 kA/m) of magnetic materials in an open 2020 CENELEC 7 magnetic circuit 77 EN IEC 60471 Clevis and tongue couplings of string insulator units - Dimensions 2020 CENELEC 78 EN IEC 60512- Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current 2020 CENELEC 9-5 loading, cyclic 79 EN IEC 60519- Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements 2020 CENELEC 1 80 EN IEC 60519- Safety in installations for electroheating and electromagnetic processing - Part 8: Particular requirements for electroslag 2020 CENELEC 8 remelting furnaces 81 EN IEC 60565- Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 1: Procedures for free-field calibration of 2020 CENELEC 1 hydrophones 82 EN IEC 60580 Medical electrical equipment - Dose area product meters 2020 CENELEC 83 EN IEC 60601- Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant 2020 CENELEC 2-20 transport incubators 84 EN IEC 60601- Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, 2020 CENELEC 2-22 cosmetic, therapeutic and diagnostic laser equipment 85 EN IEC 60601- Medical electrical equipment - Part 2-31: Particular requirements for the basic safety and essential performance of external 2020 CENELEC 2-31 cardiac pacemakers with internal power source 86 EN IEC 60601- Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing 2020 CENELEC 2-66 aids and hearing aid systems 87 EN IEC 60601- Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and essential performance of home 2020 CENELEC 2-83 light therapy equipment - Incorporates Amendment A11: 2021 88 EN IEC 60603- Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors 2020 CENELEC 7 89 EN IEC 60645- Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration 2020 CENELEC 3 90 EN IEC 60664- Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests 2020 CENELEC 1 91 EN IEC 60667- Vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements 2020 CENELEC 1 92 EN IEC 60667- Vulcanized fibre for electrical purposes - Part 2: Methods of test 2020 CENELEC 2 93 EN IEC 60667- Vulcanized fibre for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Flat sheets 2020 CENELEC 3-1 94 EN IEC 60695- Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering 2020 CENELEC 1-12 95 EN IEC 60704- Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: 2020 CENELEC 2-1 Particular requirements for dry vacuum cleaners 96 EN IEC 60704- Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7: 2020 CENELEC 2-7 Particular requirements for fans 97 EN IEC 60704- Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: 2020 CENELEC 2-8 Particular requirements for electric shavers, hair clippers or trimmers 98 EN IEC 60704- Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-17: 2020 CENELEC 2-17 Particular requirements for dry-cleaning robots 99 EN IEC 60721- Classification of environmental conditions - Part 3-0: Classification of groups of environmental parameters and their 2020 CENELEC 3-0 severities - Introduction 100 EN IEC 60730- Automatic electrical controls - Part 2-7: Particular requirements for timers and time switches 2020 CENELEC 2-7 101 EN IEC 60730- Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated 2020 CENELEC 2-8 water valves, including mechanical requirements 102 EN IEC 60730- Automatic electrical controls - Part 2-11: Particular requirements for energy regulators 2020 CENELEC 2-11 103 EN IEC 60730- Automatic electrical controls - Part 2-22: Particular requirements for thermal motor protectors 2020 CENELEC 2-22 104 EN IEC 60747- Semiconductor devices - Part 5-5: Optoelectronic devices - Photocouplers 2020 CENELEC 5-5 105 EN IEC 60747- Semiconductor devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation 2020 CENELEC 17 106 EN IEC 60749- Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through- 2020 CENELEC 15 hole mounted devices 107 EN IEC 60749- Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic encapsulated SMDs to the 2020 CENELEC 20 combined effect of moisture and soldering heat 108 EN IEC 60749- Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount 2020 CENELEC 30 devices prior to reliability testing 109 EN IEC 60749- Semiconductor devices - Mechanical and climatic test methods - Part 41: Standard reliability testing methods of non- 2020 CENELEC 41 volatile memory devices 110 EN IEC 60779 Installations for electroheating and electromagnetic processing - Test methods for electroslag remelting furnaces 2020 CENELEC 111 EN IEC 60794- Optical fibre cables - Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - 2020 CENELEC 1-215 Cable external freezing test, Method F15 112 EN IEC 60794- Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated 2020 CENELEC 2-50 cable assemblies 113 EN IEC 60794- Optical fibre cables - Part 6-10: Indoor-outdoor cables - Family specification for universal indoor-outdoor cables 2020 CENELEC 6-10 114 EN IEC 60794- Optical fibre cables - Part 6-20: Indoor-outdoor cables - Family specification for flame retardant outdoor cables 2020 CENELEC 6-20 115 EN IEC 60794- Optical fibre cables - Part 6-30: Indoor-outdoor cables - Family specification for weatherised indoor cables 2020 CENELEC 6-30 116 EN IEC 60794- Optical fibre cables - Part 6: Indoor-outdoor cables - Sectional specification for indoor-outdoor cables 2020 CENELEC 6 117 EN IEC 60839- Alarm and electronic security systems - Part 11-5: Electronic access control systems - Open Supervised Device Protocol 2020 CENELEC 11-5 (OSDP) 118 EN IEC 60895 Live working - Conductive clothing 2020 CENELEC 119 EN IEC 60904- Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics 2020 CENELEC 1 120 EN IEC 60904- Photovoltaic devices - Part 9: Classification of solar simulator characteristics 2020 CENELEC 9 121 EN IEC 60904- Photovoltaic devices - Part 10: Methods of linear dependence and linearity measurements 2020 CENELEC 10 122 EN IEC 60947- Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches 2020 CENELEC 5-2 123 EN IEC 61000- Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, 2020 CENELEC 4-3 electromagnetic field immunity test 124 EN IEC 61000- Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions 2020 CENELEC 4-11 and voltage variations immunity tests for equipment with input current up to 16 A per phase 125 EN IEC 61000- Electromagnetic compatibility (EMC) - Part 6-8: Generic standards - Emission standard for professional equipment in 2020 CENELEC 6-8 commercial and light-industrial locations 126 EN IEC 61007 Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test 2020 CENELEC procedures 127 EN IEC 61010- Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular 2020 CENELEC 2-010 requirements for laboratory equipment for the heating of materials 128 EN IEC 61010- Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular 2020 CENELEC 2-081 requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes 129 EN IEC 61076- Connectors for electrical and electronic equipment - Product Requirements - Part 2-012: Circular connectors - Detail 2020 CENELEC 2-012 specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2- 101, IEC 61076-2-109, 130 EN IEC 61076- Connectors for electrical and electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail 2020 CENELEC 2-114 specification for connectors with M8 screw-locking with power contacts and signal contacts for data transmission up to 100 MHz 131 EN IEC 61076- Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail 2020 CENELEC 8-100 specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A 132 EN IEC 61076- Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail 2020 CENELEC 8-101 specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A 133 EN IEC 61076- Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail 2020 CENELEC 8-102 specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A 134 EN IEC 61108- Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2020 CENELEC 5 5: BeiDou navigation satellite system (BDS) - Receiver equipment - Performance requirements, methods of testing and required test results 135 EN IEC 61123 Reliability testing - Compliance test plans for success ratio 2020 CENELEC 136 EN IEC 61163- Reliability stress screening - Part 2: Components 2020 CENELEC 2 137 EN IEC 61169- Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection 2020 CENELEC 1-4 coefficient 138 EN IEC 61169- Radio-frequency connectors - Part 61: Sectional specification for RF coaxial connectors with 9,5 mm inner diameter of 2020 CENELEC 61 outer conductor, quick lock coupling, series Q4.1-9.5 139 EN IEC 61169- Radio-frequency connectors - Part 63: Sectional specification - RF coaxial connectors with inner diameter of outer 2020 CENELEC 63 conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 75 ohms (type BNC75) 140 EN IEC 61189- Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-504: 2020 CENELEC 5-504 General test methods for materials and assemblies - Process ionic contamination testing (PICT) 141 EN IEC 61223- Evaluation and routine testing in medical imaging departments - Part 3-6: Acceptance and constancy tests - Imaging 2020 CENELEC 3-6 performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation 142 EN IEC 61228 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method 2020 CENELEC 143 EN IEC 61280- Fibre-optic communication subsystem test procedures - Part 4-5: Installed cabling plant - Attenuation measurement of 2020 CENELEC 4-5 MPO terminated fibre optic cabling plant using test equipment with MPO interfaces 144 EN IEC 61290- Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method 2020 CENELEC 1-1 145 EN IEC 61293 Marking of electrical equipment with ratings related to electrical supply - Safety requirements 2020 CENELEC 146 EN IEC 61300- Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-56: Tests - 2020 CENELEC 2-56 Wind resistance of mounted housing 147 EN IEC 61300- Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55: 2020 CENELEC 3-55 Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components 148 EN IEC 61400- Wind energy generation systems - Part 5: Wind turbine blades 2020 CENELEC 5 149 EN IEC 61400- Wind energy generation systems - Part 6: Tower and foundation design requirements 2020 CENELEC 6 150 EN IEC 61400- Wind energy generation systems - Part 27-1: Electrical simulation models - Generic models 2020 CENELEC 27-1 151 EN IEC 61400- Wind energy generation systems - Part 27-2: Electrical simulation models - Model validation 2020 CENELEC 27-2 152 EN IEC 61439- Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping 2020 CENELEC 7 sites, market squares, electric vehicle charging stations 153 EN IEC 61496- Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests 2020 CENELEC 1 154 EN IEC 61496- Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active 2020 CENELEC 2 opto-electronic protective devices (AOPDs) 155 EN IEC 61631 Test method for the mechanical strength of cores made of magnetic oxides 2020 CENELEC 156 EN IEC 61643- Components for low-voltage surge protection - Part 331: Performance requirements and test methods for metal oxide 2020 CENELEC 331 varistors (MOV) 157 EN IEC 61643- Components for low-voltage surge protection - Part 341: Performance requirements and test circuits for thyristor surge 2020 CENELEC 341 suppressors (TSS) 158 EN IEC 61701 Photovoltaic (PV) modules - Salt mist corrosion testing 2020 CENELEC 159 EN IEC 61753- Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Single-mode fibre optic 2020 CENELEC 061-2 pigtailed style polarization independent isolators for category C - Controlled environments 160 EN IEC 61753- Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorized 2020 CENELEC 071-02 single-mode fibre optic 1 _ 2 and 2 _ 2 spatial switches for category C - Controlled environments 161 EN IEC 61754- Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 35: Type LSHE 2020 CENELEC 35 connector family for harsh environments 162 EN IEC 61756- Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: 2020 CENELEC 1 General and guidance 163 EN IEC 61757- Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings 2020 CENELEC 1-1 164 EN IEC 61757- Fibre optic sensors - Part 4-3: Electric current measurement - Polarimetric method 2020 CENELEC 4-3 165 EN IEC 61760- Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs) 2020 CENELEC 1 166 EN IEC 61788- Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn 2020 CENELEC 4 composite superconductors 167 EN IEC 61788- Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature 2020 CENELEC 7 superconductors at microwave frequencies 168 EN IEC 61788- Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors 2020 CENELEC 26 169 EN IEC 61803 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters 2020 CENELEC 170 EN IEC 61804- Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device description 2020 CENELEC 3 language (EDDL) - Part 3: EDDL syntax and semantics 171 EN IEC 61804- Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device description 2020 CENELEC 4 language (EDDL) - Part 4: EDD interpretation 172 EN IEC 61804- Devices and intergration in enterprise systems - Function blocks (FB) for process control and electronic device description 2020 CENELEC 5 language (EDDL) - Part 5: EDDL Builtin library 173 EN IEC 61810- Electromechanical elementary relays - Part 4: General and safety requirements for reed relays 2020 CENELEC 4 174 EN IEC 61854 Overhead lines - Requirements and tests for spacers 2020 CENELEC 175 EN IEC 61897 Overhead lines - Requirements and tests for Aeolian vibration dampers 2020 CENELEC 176 EN IEC 61960- Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for 2020 CENELEC 4 portable applications - Part 4: Coin secondary lithium cells, and batteries made from them 177 EN IEC 61968- Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architecture 2020 CENELEC 1 and general recommendations 178 EN IEC 61968- Application integration at electric utilities - System interfaces for distribution management - Part 5: Distributed energy 2020 CENELEC 5 optimization 179 EN IEC 61969- Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines 2020 CENELEC 1 180 EN IEC 61969- Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, 2020 CENELEC 3 tests and safety aspects 181 EN IEC 61970- Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base 2020 CENELEC 301 182 EN IEC 61977 Fibre optic interconnecting devices and passive components - Fibre optic fixed filters - Generic specification 2020 CENELEC 183 EN IEC 62003 Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for electromagnetic 2020 CENELEC compatibility testing 184 EN IEC 62024- High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of 2020 CENELEC 2 inductors for DC-to-DC converters 185 EN IEC 62031 LED modules for general lighting - Safety specifications 2020 CENELEC 186 EN IEC 62041 Transformers, power supplies, reactors and similar products - EMC requirements 2020 CENELEC 187 EN IEC 62056- Electricity metering data exchange - The DLMS/COSEM suite - Part 8-8: Communication profile for ISO/IEC 14908 series 2020 CENELEC 8-8 networks 188 EN IEC 62148- Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers 2020 CENELEC 6 189 EN IEC 62149- Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters 2020 CENELEC 3 for 40-Gbit/s fibre optic transmission systems 190 EN IEC 62149- Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and 2020 CENELEC 5 CDR ICs 191 EN IEC 62149- Fibre optic active components and devices - Performance standards - Part 11: Multiple channel transmitter/receiver chip 2020 CENELEC 11 scale package with multimode fibre interface 192 EN IEC 62271- High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages higher than 52 kV 2020 CENELEC 104 193 EN IEC 62271- High-voltage switchgear and controlgear - Part 108: High-voltage alternating current disconnecting circuit-breakers for 2020 CENELEC 108 rated voltages above 52 kV 194 EN IEC 62282- Fuel cell technologies - Part 3-100: Stationary fuel cell power systeFuel cell technologies - Part 3-100: Stationary fuel cell 2020 CENELEC 3-100 power systems - Safety 195 EN IEC 62282- Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for 2020 CENELEC 8-101 the performance of solid oxide single cells and stacks, including reversible operation 196 EN IEC 62282- Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for 2020 CENELEC 8-102 the performance of single cells and stacks with proton exchange membranes, including reversible operation 197 EN IEC 62282- No Title - Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test 2020 CENELEC 8-201 procedures for the performance of power-to-power systems 198 EN IEC 62311 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 2020 CENELEC 300 GHz) 199 EN IEC 62343- Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches 2020 CENELEC 3-3 200 EN IEC 62351- Power systems management and associated information exchange - Data and communications security - Part 6: Security for 2020 CENELEC 6 IEC 61850 201 EN IEC 62351- Power systems management and associated information exchange - Data and communications security - Part 8: Role-based 2020 CENELEC 8 access control for power system management 202 EN IEC 62368- Audio/video, information and communication technology equipment - Part 3: Safety aspects for DC power transfer through 2020 CENELEC 3 communication cables and ports 203 EN IEC 62384 DC or AC supplied electronic controlgear for LED modules - Performance requirements 2020 CENELEC 204 EN IEC 62386- Digital addressable lighting interface - Part 105: Particular requirements for control gear and control devices - Firmware 2020 CENELEC 105 Transfer 205 EN IEC 62435- Electronic components - Long-term storage of electronic semiconductor devices - Part 3: Data 2020 CENELEC 3 206 EN IEC 62435- Electronic components - Long-term storage of electronic semiconductor devices - Part 8: Passive electronic devices 2020 CENELEC 8 207 EN IEC 62443- Security for industrial automation and control systems - Part 3-2: Security risk assessment for system design 2020 CENELEC 3-2 208 EN IEC 62446- Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 2: Grid connected systems - 2020 CENELEC 2 Maintenance of PV systems 209 EN IEC 62496- Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty- 2020 CENELEC 4-214 two-channel symmetric PMT connector 210 EN IEC 62541- OPC Unified Architecture - Part 3: Address Space Model 2020 CENELEC 3 211 EN IEC 62541- OPC Unified Architecture - Part 4: Services 2020 CENELEC 4 212 EN IEC 62541- OPC Unified Architecture - Part 5: Information Model 2020 CENELEC 5 213 EN IEC 62541- OPC Unified Architecture - Part 6: Mappings 2020 CENELEC 6 214 EN IEC 62541- OPC unified architecture - Part 7: Profiles 2020 CENELEC 7 215 EN IEC 62541- OPC Unified Architecture - Part 8: Data Access 2020 CENELEC 8 216 EN IEC 62541- OPC unified architecture - Part 9: Alarms and conditions 2020 CENELEC 9 217 EN IEC 62541- OPC Unified Architecture - Part 10: Programs 2020 CENELEC 10 218 EN IEC 62541- OPC Unified Architecture - Part 11: Historical Access 2020 CENELEC 11 219 EN IEC 62541- OPC unified architecture - Part 12: Discovery and global services 2020 CENELEC 12 220 EN IEC 62541- OPC Unified Architecture - Part 13: Aggregates 2020 CENELEC 13 221 EN IEC 62541- OPC unified architecture - Part 14: PubSub 2020 CENELEC 14 222 EN IEC 62566- Nuclear power plants - Instrumentation and control systems important to safety - Development of HDL-programmed 2020 CENELEC 2 integrated circuits - Part 2: HDL-programmed integrated circuits for systems performing category B or C functions 223 EN IEC 62610- Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 2020 CENELEC 6 60297 and IEC 60917 series - Part 6: Air recirculation and bypass of indoor cabinets 224 EN IEC 62614- Fibre optics - Multimode launch conditions - Part 1: Launch condition requirements for measuring multimode attenuation 2020 CENELEC 1 225 EN IEC 62645 Nuclear power plants - Instrumentation, control and electrical power systems - Cybersecurity requirements 2020 CENELEC 226 EN IEC 62656- Standardized product ontology register and transfer by data parcels - Part 8: Web service interface for data parcels 2020 CENELEC 8 227 EN IEC 62680- Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification 2020 CENELEC 1-2 228 EN IEC 62714- Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - 2020 CENELEC 4 Part 4: Logic 229 EN IEC 62769- Field device integration (FDI) - Part 100: Profiles - Generic protocols 2020 CENELEC 100 230 EN IEC 62769- Field device integration (FDI) - Part 103-1: Profiles - PROFIBUS 2020 CENELEC 103-1 231 EN IEC 62769- Field device integration (FDI) - Part 103-4: Profiles - PROFINET 2020 CENELEC 103-4 232 EN IEC 62769- Field devices integration (FDI) - Part 109-1: Profiles - HART(r) and WirelessHART(r) 2020 CENELEC 109-1 233 EN IEC 62769- Field device integration (FDI) - Part 115-2: Profiles - Modbus- RTU 2020 CENELEC 115-2 234 EN IEC 62788- Measurement procedures for materials used in photovoltaic modules - Part 1-7: Encapsulants - Test procedure of optical 2020 CENELEC 1-7 durability 235 EN IEC 62788- Measurement procedures for materials used in photovoltaic modules - Part 5-1: Edge seals - Suggested test methods for use 2020 CENELEC 5-1 with edge seal materials 236 EN IEC 62788- Measurement procedures for materials used in photovoltaic modules - Part 6-2: General tests - Moisture permeation testing 2020 CENELEC 6-2 of polymeric materials 237 EN IEC 62790 Junction boxes for photovoltaic modules - Safety requirements and tests 2020 CENELEC 238 EN IEC 62793 Thunderstorm warning systems - Protection against lightning 2020 CENELEC 239 EN IEC 62828- Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific 2020 CENELEC 4 procedures for level transmitters 240 EN IEC 62828- Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5: Specific 2020 CENELEC 5 procedures for flow transmitters 241 EN IEC 62832- Industrial-process measurement, control and automation - Digital factory framework - Part 1: General principles 2020 CENELEC 1 242 EN IEC 62832- Industrial-process measurement, control and automation - Digital factory framework - Part 2: Model elements 2020 CENELEC 2 243 EN IEC 62832- Industrial-process measurement, control and automation - Digital factory framework - Part 3: Application of Digital 2020 CENELEC 3 Factory for life cycle management of production systems 244 EN IEC 62885- Surface cleaning appliances - Part 4: Cordless dry vacuum cleaners for household or similar use - Methods for measuring 2020 CENELEC 4 the performance 245 EN IEC 62890 Industrial-process measurement, control and automation - Life-cycle-management for systems and components 2020 CENELEC 246 EN IEC 62932- Flow battery energy systems for stationary applications - Part 1: Terminology and general aspects 2020 CENELEC 1 247 EN IEC 62932- Flow battery energy systems for stationary applications - Part 2-1: Performance general requirements and test methods 2020 CENELEC 2-1 248 EN IEC 62932- Flow battery energy systems for stationary applications - Part 2- 2: Safety requirements 2020 CENELEC 2-2 249 EN IEC 62933- Electrical energy storage (EES) systems - Part 5-2: Safety requirements for grid-integrated EES systems - Electrochemical- 2020 CENELEC 5-2 based systems 250 EN IEC 62938 Photovoltaic (PV) modules - Non-uniform snow load testing 2020 CENELEC 251 EN IEC 62941 Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing 2020 CENELEC 252 EN IEC 62942 File format for professional transfer and exchange of digital audio data 2020 CENELEC 253 EN IEC 62960 Dependability reviews during the life cycle 2020 CENELEC 254 EN IEC 62966- Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 2: Details of air 2020 CENELEC 2 flow, air separation and air cooling requirements 255 EN IEC 62984- High-temperature secondary batteries - Part 1: General requirements 2020 CENELEC 1 256 EN IEC 62984- High-temperature secondary batteries - Part 2: Safety requirements and tests 2020 CENELEC 2 257 EN IEC 62984- High-temperature secondary batteries - Part 3: Sodium-based batteries - Performance requirements and tests 2020 CENELEC 3 258 EN IEC 63005- Event video data recorder for road vehicle accidents - Part 2: Test methods for evaluating the performance of basic 2020 CENELEC 2 functions 259 EN IEC 63008 Household and similar electrical appliances - Accessibility of control elements, doors, lids, drawers and handles 2020 CENELEC 260 EN IEC 63034 Microspeakers 2020 CENELEC 261 EN IEC 63041- Piezoelectric sensors - Part 3: Physical sensors 2020 CENELEC 3 262 EN IEC 63045 Ultrasonics - Non-focusing short pressure pulse sources including ballistic pressure pulse sources - Characteristics of fields 2020 CENELEC 263 EN IEC 63056 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium 2020 CENELEC cells and batteries for use in electrical energy storage systems 264 EN IEC 63057 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Safety requirements for secondary lithium 2020 CENELEC batteries for use in road vehicles not for the propulsion 265 EN IEC 63067 Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests 2020 CENELEC 266 EN IEC 63073- Dedicated radionuclide imaging devices - Characteristics and test conditions - Part 1: Cardiac SPECT 2020 CENELEC 1 267 EN IEC 63078 Installations for electroheating and electromagnetic processing - Test methods for induction through-heating installations 2020 CENELEC 268 EN IEC 63086- Household and similar electrical air cleaning appliances - Methods for measuring the performance - Part 1: General 2020 CENELEC 1 requirements 269 EN IEC 63093- Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification 2020 CENELEC 1 270 EN IEC 63093- Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use in 2020 CENELEC 2 telecommunications, power supply, and filter applications 271 EN IEC 63093- Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for 2020 CENELEC 3 inductive proximity switches 272 EN IEC 63093- Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores 2020 CENELEC 9 273 EN IEC 63103 Lighting equipment - Non-active mode power measurement 2020 CENELEC 274 EN IEC 63115- Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and 2020 CENELEC 1 batteries for use in industrial applications - Part 1: Performance 275 EN IEC 63129 Determination of inrush current characteristics of lighting products 2020 CENELEC 276 EN IEC 63132- Guidance for installation procedures and tolerances of hydroelectric machines - Part 1: General aspects 2020 CENELEC 1 277 EN IEC 63132- Guidance for installation procedures and tolerances of hydroelectric machines - Part 2: Vertical generators 2020 CENELEC 2 278 EN IEC 63132- Guidance for installation procedures and tolerances of hydroelectric machines - Part 3: Vertical Francis turbines or pump- 2020 CENELEC 3 turbines 279 EN IEC 63132- Guidance for installation procedures and tolerances of hydroelectric machines - Part 4: Vertical Kaplan or propeller 2020 CENELEC 4 turbines 280 EN IEC 63155 Guidelines for the measurement method of power durability for surface acoustic wave (SAW) and bulk acoustic wave 2020 CENELEC (BAW) devices in radio frequency (RF) applications 281 EN IEC 63169 Electrical household and similar cooling and freezing appliances - Food preservation 2020 CENELEC 282 EN IEC 63171- Connectors for electrical and electronic equipment - Part 1: Detail specification for two-way, shielded or unshielded, free 2020 CENELEC 1 and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style 283 EN IEC 63171- Connectors for electrical and electronic equipment - Part 6: Detail specification for 2-way and 4-way (data/power), 2020 CENELEC 6 shielded, free and fixed connectors for power and data transmission with frequencies up to 600 MHz 284 EN IEC 63172 Electrical accessories - Methodology for determining the energy efficiency class of electrical accessories 2020 CENELEC 285 EN IEC 63180 Methods of measurement and declaration of the detection range of detectors - Passive infrared detectors for major and 2020 CENELEC minor motion detection 286 EN IEC 63181- LCD multi-screen display terminals - Part 2: Measuring methods 2020 CENELEC 2 287 EN IEC 63182- Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification 2020 CENELEC 1 288 EN IEC 63182- Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Ring-cores 2020 CENELEC 2 289 EN IEC 63252 Energy consumption of vending machines 2020 CENELEC 290 EN IEC 80601- Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of 2020 CENELEC 2-26 electroencephalographs 291 EN IEC 80601- Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental 2020 CENELEC 2-60 equipment 292 EN IEC 80601- Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical 2020 CENELEC 2-78 robots for rehabilitation, assessment, compensation or alleviation 293 EN IEC-IEEE Preparation of information for use (instructions for use) of products - Part 1: Principles and general requirements 2020 CENELEC 82079-1 294 EN IEC 60730- NULL 2020 CENELEC 0 2-9-2019+A2 295 EN IEC 62443- NULL 2020 CENELEC 0 3-2 296 EN IEC 62443- NULL 2019 CENELEC 0 3-3 297 EN IEC 62464- NULL 2019 CENELEC 0 1 298 EN IEC 62465 NULL 2019 CENELEC 0 299 EN IEC 62646 NULL 2019 CENELEC 0 300 EN IEC 62858 NULL 2019 CENELEC 0 301 EN IEC 62976 NULL 2019 CENELEC 0 302 EN IEC 63077 NULL 2019 CENELEC 0 303 EN IEC-ASTM NULL 2019 CENELEC 0 62885-6 304 EN IEC 60793- NULL 2019 CENELEC 0 2-50 305 EN IEC 60793- NULL 2019 CENELEC 0 2 306 EN IEC 60904- NULL 2019 CENELEC 0 4 307 EN IEC 61188- NULL 2019 CENELEC 0 6-4 308 EN IEC 61238- NULL 2019 CENELEC 0 1-3-2019+A11 309 EN IEC 61300- NULL 2019 CENELEC 0 2-54 310 EN IEC 61535 NULL 2019 CENELEC 0 311 EN IEC 61784- NULL 2019 CENELEC 0 1 312 EN IEC 62401 NULL 2019 CENELEC 0 313 EN IEC 62443- NULL 2019 CENELEC 0 2-4-2019+A1 314 EN 62841-2-1- NULL 2019 CENELEC 0 2018+A11 315 EN IEC 60077- NULL 2019 CENELEC 0 3 316 EN IEC 60077- NULL 2019 CENELEC 0 4 317 EN IEC 60077- NULL 2019 CENELEC 0 5 318 EN IEC 60309- NULL 2019 CENELEC 0 5 319 EN IEC 60311 NULL 2019 CENELEC 0 320 EN IEC 60317- NULL 2019 CENELEC 0 27-3 321 EN IEC 60384- NULL 2019 CENELEC 0 16 322 EN IEC 60512- NULL 2019 CENELEC 0 23-3 323 EN IEC 60512- NULL 2019 CENELEC 0 28-100 324 EN IEC 60730- NULL 2019 CENELEC 0 2-9-2019+A1 325 HD 60364-8-2- NULL 2019 CENELEC 0 2011+A11 326 PD CLC IEC- NULL 2019 CENELEC 0 TR 61508-0 327 PD CLC IEC- NULL 2019 CENELEC 0 TR 61511-0 328 PD CLC IEC- NULL 2019 CENELEC 0 TR 62271-307 329 PD CLC IEC- NULL 2019 CENELEC 0 TR 62453-51- 15 330 PD CLC IEC- NULL 2019 CENELEC 0 TR 62453-52- 15 331 PD CLC IEC- NULL 2019 CENELEC 0 TS 60079-39 332 PD CLC-TR NULL 2019 CENELEC 0 62453-51-31 333 PD CLC-TR NULL 2019 CENELEC 0 62453-51-90 334 PD CLC-TS NULL 2019 CENELEC 0 50703-1 335 EN 61784-3-12- NULL 2019 CENELEC 0 2010+A1 336 EN 15494 NULL 2019 CENELEC 0 337 EN ISO 5398-4 NULL 2019 CENELEC 0 338 EN ISO 7263-1 NULL 2019 CENELEC 0 339 EN ISO 7263-2 NULL 2019 CENELEC 0 340 EN ISO 7886-4 Sterile hypodermic syringes for single use Part 4: Syringes with re-use prevention feature 2019 CENELEC 0 341 EN ISO 9697 NULL 2019 CENELEC 0 342 EN ISO 9994 NULL 2019 CENELEC 0 343 EN ISO 14064- Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of 2019 CENELEC 0 1 greenhouse gas emissions and removals - CORR: June 30, 2012 344 EN ISO 14064- Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of 2019 CENELEC 0 2 greenhouse gas emission reductions or removal enhancements - CORR: June 30, 2012 345 EN ISO 14064- Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions - 2019 CENELEC 0 3 CORR: April 30, 2012 346 EN ISO 14405- Geometrical product specifications (GPS) - Dimensional tolerancing Part 2: Dimensions other than linear sizes 2019 CENELEC 0 2 347 EN ISO 15195 NULL 2019 CENELEC 0 348 EN ISO 17226- Leather - Chemical determination of formaldehyde content Part 1: Method using high performance liquid chromatography 2019 CENELEC 0 1 349 EN ISO 17226- Leather - Chemical determination of formaldehyde content Part 2: Method using colorimetric analysis - CORR: January 31, 2019 CENELEC 0 2 2010 350 EN ISO 18254- NULL 2019 CENELEC 0 2 351 EN ISO 20166- NULL 2019 CENELEC 0 3 352 ISO 20468-2 NULL 2019 CENELEC 0 353 EN ISO 8384 Ships and Marine Technology - Dredgers - Vocabulary - CORR 13356: September 2001 2019 CENELEC 0 354 EN 15494 NULL 2019 CENELEC 0 355 EN 45556 General method for assessing the proportion of reused components in energy-related products 2019 CENELEC 0 356 EN 45558 General method to declare the use of critical raw materials in energy-related products 2019 CENELEC 0 357 EN 45559 Methods for providing information relating to material efficiency aspects of energy-related products 2019 CENELEC 0 358 EN 50041 Low-voltage switchgear and controlgear - Control switches - Position switches 42,5 x 80 - Dimensions and characteristics 2019 CENELEC 0 359 EN 50047 Low-voltage switchgear and controlgear - Control switches - Position switches 30 _ 55 - Dimensions and characteristics 2019 CENELEC 0 360 EN 50104 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods 2019 CENELEC 0 361 EN 50117-1 (WITHDRAWN) 1997 Coaxial Cables Used in Cabled Distribution Networks Part 1: Generic Specification (S) 2019 CENELEC 0 362 EN 50117-9-1 Coaxial cables Part 9-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop 2019 CENELEC 0 cables for systems operating at 5 MHz - 1 000 MHz 363 EN 50117-9-2 Coaxial cables Part 9-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop 2019 CENELEC 0 cables for systems operating at 5 MHz - 3 000 MHz 364 EN 50117-9-3 Coaxial cables Part 9-3: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop 2019 CENELEC 0 cables for systems operating at 5 MHz - 6 000 MHz 365 EN 50117-10-1 Coaxial cables Part 10-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Outdoor 2019 CENELEC 0 drop cables for systems operating at 5 MHz - 1 000 MHz 366 EN 50117-10-2 Coaxial cables Part 10-2: Sectional specification for coaxial cables for analogue and digital signal transmission - Outdoor 2019 CENELEC 0 drop cables for systems operating at 5 MHz - 3 000 MHz 367 EN 50117-11-1 Coaxial cables Part 11-1: Sectional specification for coaxial cables for analogue and digital signal transmission - 2019 CENELEC 0 Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz 368 EN 50117-11-2 Coaxial cables Part 11-2: Sectional specification for coaxial cables for analogue and digital signal transmission - 2019 CENELEC 0 Distribution and trunk cables for systems operating at 5 MHz - 2 000 MHz 369 EN 50131-4 Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices 2019 CENELEC 0 370 EN 50131-8 Alarm systems - Intrusion and hold-up systems - Part 8: Security fog device/systems 2019 CENELEC 0 371 EN 50194-2 Electrical apparatus for the detection of combustible gases in domestic premises Part 2: Electrical apparatus for continuous 2019 CENELEC 0 operation in a fixed installation in recreational vehicles and similar premises Additional test methods and performance requiremen 372 EN 50238-1 Railway applications _ Compatibility between rolling stock and train detection systems Part 1: General 2019 CENELEC 0 373 EN 50291-2 Electrical apparatus for the detection of carbon monoxide in domestic premises Part 2: Electrical apparatus for continuous 2019 CENELEC 0 operation in a fixed installations in recreational vehicles and similar premises including recreational craft - Additional test meth 374 EN 50341-2-2 Overhead electrical lines exceeding AC 1 kV Part 2-2: National Normative Aspects (NNA) for BELGIUM (based on EN 2019 CENELEC 0 50341-1:2012) 375 EN 50341-2-4 Overhead electrical lines exceeding AC 1 kV Part 2-4: National Normative Aspects (NNA) for Germany (based on EN 2019 CENELEC 0 50341-1:2012) 376 EN 50341-2-15 Overhead electrical lines exceeding AC 1 kV Part 2-15: National Normative Aspects (NNAs) for the Netherlands (based on 2019 CENELEC 0 EN 50341-1:2012) 377 EN 50342-2 NULL 2019 CENELEC 0 378 EN 50377-18-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2019 CENELEC 0 Part 18-1: type 4+ 4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector equipped with 12 fibre PPS fibre PPS ferrules term 379 EN 50411-3-4 Fibre management systems and protective housings to be used in optical fibre communication systems _ Product 2019 CENELEC 0 specifications Part 3-4: Wall box for splice to patchcord connections, for category C and A 380 EN 50411-4-1 Fibre management systems and protective housings to be used in optical fibre communication systems _ Product 2019 CENELEC 0 specifications Part 4-1: Passive optical street cabinet for category A 381 EN 50413 Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic 2019 CENELEC 0 fields (0 Hz - 300 GHz) - AMD: November 30, 2013 382 EN 50436-4 Alcohol interlocks - Test methods and performance requirements Part 4: Connection and digital interface between the 2019 CENELEC 0 alcohol interlock and the vehicle 383 EN 50499 Procedure for the assessment of the exposure of workers to electromagnetic fields 2019 CENELEC 0 384 EN 50518 Monitoring and Alarm Receiving Centre 2019 CENELEC 0 385 EN 50549-1 Requirements for generating plants to be connected in parallel with distribution networks Part 1: Connection to a LV 2019 CENELEC 0 distribution network - Generating plants up to and including Type B - CORR: April 30, 2019 386 EN 50549-2 Requirements for generating plants to be connected in parallel with distribution networks Part 2: Connection to a MV 2019 CENELEC 0 distribution network - Generating plants up to and including Type B - CORR: April 30, 2019 387 EN 50551-1 Simplex and duplex cables to be used for cords Part 1: Blank Detail Specification and minimum requirements 2019 CENELEC 0 388 EN 50591 Railway Applications - Rolling Stock - Specification and verification of energy consumption 2019 CENELEC 0 389 EN 50600-1 Information technology - Data centre facilities and infrastructures - Part 1: General concepts 2019 CENELEC 0 390 EN 50600-2-2 Information technology - Data centre facilities and infrastructures Part 2-2: Power distribution 2019 CENELEC 0 391 EN 50600-2-3 Information technology - Data centre facilities and infrastructures Part 2-3: Environmental control 2019 CENELEC 0 392 EN 50668 Railway applications _ Signalling and control systems for non UGTMS Urban Rail systems 2019 CENELEC 0 393 EN 50673 Plug-in type bushings for 72,5 kV with 630 A and 1 250 A for electrical equipment 2019 CENELEC 0 394 EN 50693 Product category rules for life cycle assessments of electronic and electrical products and systems 2019 CENELEC 0 395 EN 50697 Information technology _ Measurement of end-to-end (E2E) links 2019 CENELEC 0 396 EN 50980-1 Remote alcohol monitoring devices _ Test methods and performance requirements Part 1: Instruments for assessment 2019 CENELEC 0 programmes 397 EN 60076-22-2 Power transformer and reactor cooling equipment Part 22-2: Removable radiators 2019 CENELEC 0 398 EN 60601-2-40 Medical Electrical Equipment - Part 2-40: Particular Requirements for Safety - Specification for Electromyographs and 2019 CENELEC 0 Evoked Response Equipment 399 EN 60704-3 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 3: Procedure 2019 CENELEC 0 for determining and verifying declared noise emission values 400 EN 60898-1 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations Part 1: Circuit- 2019 CENELEC 0 breakers for a.c. operation 401 EN 61643-31 Low-voltage surge protective devices Part 31: Requirements and test methods for SPDs for photovoltaic installations 2019 CENELEC 0 402 EN 62841-2-21 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 2-21: Particular 2019 CENELEC 0 requirements for hand-held drain cleaners 403 EN 62841-3-12 Electric motor-operated hand-held tools, transportable tools and lawn and arden machinery _ Safety Part 3-12: Particular 2019 CENELEC 0 requirements for transportable threading machines 404 EN 62841-4-2 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety Part 4-2: Particular 2019 CENELEC 0 requirements for hedge trimmers 405 EN IEC 31010 Risk management - Risk assessment techniques 2019 CENELEC 0 406 EN IEC 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 2019 CENELEC 0 407 EN IEC 55016- Specification for radio disturbance and immunity measuring apparatus and methods Part-1-1: Radio disturbance and 2019 CENELEC 0 1-1 immunity measuring apparatus - Measuring apparatus 408 EN IEC 55016- Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and 2019 CENELEC 0 1-4 immunity measuring apparatus - Antennas and test sites for radiated disturbance - measurements 409 EN IEC 60027- Letter symbols to be used in electrical technology Part 2: Telecommunications and electronics 2019 CENELEC 0 2 410 EN IEC 60034- Rotating electrical machines Part 23: Repair, overhaul and reclamation 2019 CENELEC 0 23 411 EN IEC 60068- Environmental testing Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic 2019 CENELEC 0 2-82 assemblies 412 EN IEC 60068- Environmental testing Part 2-85: Tests - Test Fj: Vibration - Long time history replication 2019 CENELEC 0 2-85 413 EN IEC 60068- Environmental testing Part 3-3: Supporting documentation and guidance _ Seismic test methods for equipment 2019 CENELEC 0 3-3 414 EN IEC 60071- Insulation co-ordination Part 1: Definitions, principles and rules 2019 CENELEC 0 1 415 EN IEC 60076- Power transformers Part 22-1: Power transformer and reactor fittings - Protective devices 2019 CENELEC 0 22-1 416 EN IEC 60076- Power transformers Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers 2019 CENELEC 0 22-3 417 EN IEC 60076- Power transformers Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers 2019 CENELEC 0 22-4 418 EN IEC 60079- Explosive atmospheres Part 15: Equipment protection by type of protection "n" 2019 CENELEC 0 15 419 EN IEC 60079- Explosive atmospheres Part 19: Equipment repair, overhaul and reclamation 2019 CENELEC 0 19 420 EN IEC 60086- Primary batteries Part 4: Safety of lithium batteries 2019 CENELEC 0 4 421 EN IEC 60118- Electroacoustics _ Hearing aids Part 9: Methods of measurement of the performance characteristics of bone conduction 2019 CENELEC 0 9 hearing aids 422 EN IEC 60193 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests 2019 CENELEC 0 423 EN IEC 60204- Safety of machinery _ Electrical equipment of machines Part 11: Requirements for equipment for voltages above 1 000 V 2019 CENELEC 0 11 AC or 1 500 V DC and not exceeding 36 kV 424 EN IEC 60255- Measuring relays and protection equipment Part 181: Functional requirements for frequency protection 2019 CENELEC 0 181 425 EN IEC 60276 Carbon brushes, brush holders, commutators and slip-rings _ Definitions and nomenclature 2019 CENELEC 0 426 EN IEC 60286- Packaging of components for automatic handling Part 3: Packaging of surface mount components on continuous tapes 2019 CENELEC 0 3 427 EN IEC 60317- Specifications for particular types of winding wires Part 80: Polyvinyl acetal enamelled rectangular copper wire, class 120, 2019 CENELEC 0 80 with a bonding layer 428 EN IEC 60331- Tests for electric cables under fire conditions _ Circuit integrity Part 1: Test method for fire with shock at a temperature of 2019 CENELEC 0 1 at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm 429 EN IEC 60335- Household and similar electrical appliances - Safety Part 2-111: Particular requirements for electric ondol mattress with a 2019 CENELEC 0 2-111 non-flexible heated part 430 EN IEC 60384- Fixed capacitors for use in electronic equipment Part 11: Sectional specification _ Fixed polyethylene-terephthalate film 2019 CENELEC 0 11 dielectric metal foil DC capacitors 431 EN IEC 60384- Fixed capacitors for use in electronic equipment Part 17: Sectional specification: Fixed metallized polypropylene film 2019 CENELEC 0 17 dielectric AC and pulse capacitors 432 EN IEC 60384- Fixed capacitors for use in electronic equipment Part 21: Sectional specification - Fixed surface mount multilayer 2019 CENELEC 0 21 capacitors of ceramic dielectric, Class 1 433 EN IEC 60384- Fixed capacitors for use in electronic equipment Part 22: Sectional specification - Fixed surface mount multilayer 2019 CENELEC 0 22 capacitors of ceramic dielectric, Class 2 434 EN IEC 60480 Specifications for the re-use of sulphur hexafluoride (SF6) and its mixtures in electrical equipment 2019 CENELEC 0 435 EN IEC 60512- Connectors for electrical and electronic equipment - Tests and measurements Part 11-1: Climatic tests - Test 11a - Climatic 2019 CENELEC 0 11-1 sequence 436 EN IEC 60534- Industrial-process control valves Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight 2019 CENELEC 0 3-1 pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves 437 EN IEC 60539- Directly heated negative temperature coefficient thermistors Part 2: Sectional specification - Surface mount negative 2019 CENELEC 0 2 temperature coefficient thermistors 438 EN IEC 60565- Underwater acoustics _ Hydrophones _ Calibration of hydrophones Part 2: Procedures for low frequency pressure 2019 CENELEC 0 2 calibration 439 EN IEC 60601- Medical electrical equipment Part 2-16: Particular requirements for the basic safety and essential performance of 2019 CENELEC 0 2-16 haemodialysis, haemodiafiltration and haemofiltration equipment 440 EN IEC 60601- Medical electrical equipment Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube 2019 CENELEC 0 2-28 assemblies for medical diagnosis 441 EN IEC 60601- Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal 2019 CENELEC 0 2-39 dialysis equipment 442 EN IEC 60601- Medical electrical equipment Part 2-46: Particular requirements for the basic safety and essential performance of operating 2019 CENELEC 0 2-46 tables 443 EN IEC 60601- Medical Electrical Equipment Part 2-75: Particular requirements for the basic safety and essential performance of 2019 CENELEC 0 2-75 photodynamic therapy and photodynamic diagnosis equipment 444 EN IEC 60601- Medical electrical equipment Part 2-76: Particular requirements for the basic safety and essential performance of low 2019 CENELEC 0 2-76 energy ionized gas haemostasis equipment 445 EN IEC 60633 High-voltage direct current (HVDC) transmission - Vocabulary 2019 CENELEC 0 446 EN IEC 60665 A.C. ventilating fans and regulators for household and similar purposes _ Methods for measuring performance 2019 CENELEC 0 447 EN IEC 60674- Specification for plastic films for electrical purposes Part 3: Specifications for individual materials - Sheet 2: Requirements 2019 CENELEC 0 3-2 for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation 448 EN IEC 60684- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving _ Sheet 214: Heatshrinkable, polyolefin 2019 CENELEC 0 3-214 sleeving, not flame retarded, thick and medium wall 449 EN IEC 60684- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving _ Sheet 216: Heat-shrinkable, flame- 2019 CENELEC 0 3-216 retarded, limited-fire-hazard sleeving 450 EN IEC 60684- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin 2019 CENELEC 0 3-247 sleeving, dual wall, not flame retarded, thick and medium wall 451 EN IEC 60684- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving _ Sheet 280: Heat-shrinkable, polyolefin 2019 CENELEC 0 3-280 sleeving, anti-tracking 452 EN IEC 60684- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving _ Sheet 283: Heat-shrinkable, polyolefin 2019 CENELEC 0 3-283 sleeving for bus-bar insulation 453 EN IEC 60704- Household and similar electrical appliances _ Test code for the determination of airborne acoustical noise Part 2-16: 2019 CENELEC 0 2-16 Particular requirements for washer-dryers 454 EN IEC 60709 Nuclear power plants - Instrumentation, control and electrical systems important to safety - Separation 2019 CENELEC 0 455 EN IEC 60721- Classification of environmental conditions Part 3-3: Classification of groups of environmental parameters and their 2019 CENELEC 0 3-3 severities - Stationary use at weatherprotected locations 456 EN IEC 60721- Classification of environmental conditions Part 3-4: Classification of groups of environmental parameters and their 2019 CENELEC 0 3-4 severities - Stationary use at non-weatherprotected locations 457 EN IEC 60730- Automatic electrical controls Part 2-12: Particular requirements for electrically operated door locks 2019 CENELEC 0 2-12 458 EN IEC 60730- Automatic electrical controls Part 2-14: Particular requirements for electric actuators 2019 CENELEC 0 2-14 459 EN IEC 60730- Automatic electrical controls Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level 2019 CENELEC 0 2-15 sensing controls 460 EN IEC 60746- Expression of performance of electrochemical analyzers Part 4: Dissolved oxygen in water measured by membrane- 2019 CENELEC 0 4 covered amperometric sensors 461 EN IEC 60747- Semiconductor devices Part 16-6: Microwave integrated circuits _ Frequency multipliers 2019 CENELEC 0 16-6 462 EN IEC 60749- Semiconductor devices Mechanical and climatic test methods Part 17: Neutron irradiation 2019 CENELEC 0 17 463 EN IEC 60749- Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose) 2019 CENELEC 0 18 464 EN IEC 60754- Test on gases evolved during combustion of materials from cables Part 3: Measurement of low level of halogen content by 2019 CENELEC 0 3 ion chromatography 465 EN IEC 60793- Optical fibres Part 1-31: Measurement methods and test procedures _ Tensile strength 2019 CENELEC 0 1-31 466 EN IEC 60793- Optical fibres Part 1-40: Attenuation measurement methods 2019 CENELEC 0 1-40 467 EN IEC 60793- Optical fibres Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres 2019 CENELEC 0 2-10 468 EN IEC 60794- Optical fibre cables Part 1-23: Generic specification _ Basic optical cable test procedures _ Cable element test methods 2019 CENELEC 0 1-23 469 EN IEC 60794- Optical fibre cables Part 2-11: Indoor cables _ Detailed specification for simplex and duplex cables for use in premises 2019 CENELEC 0 2-11 cabling 470 EN IEC 60794- Optical fibre cables Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in 2019 CENELEC 0 2-21 premises cabling 471 EN IEC 60794- Optical fibre cables Part 2-30: Indoor cables - Family specification for optical fibre ribbon cables for use in terminated 2019 CENELEC 0 2-30 cable assemblies 472 EN IEC 60794- Optical fibre cables Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises 2019 CENELEC 0 2-31 cabling 473 EN IEC 60825- Safety of laser products Part 12: Safety of free space optical communication systems used for transmission of information - 2019 CENELEC 0 12 CORR: June 30, 2019 474 EN IEC 60879 NULL 2019 CENELEC 0 475 EN IEC 60904- Photovoltaic devices Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral 2019 CENELEC 0 3 irradiance data 476 EN IEC 60904- Photovoltaic devices Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices 2019 CENELEC 0 7 477 EN IEC 60917- Modular order for the development of mechanical structures for electrical and electronic equipment practices Part 1: 2019 CENELEC 0 1 Generic standard 478 EN IEC 60934 Circuit-Breakers for Equipment (CBE) 2019 CENELEC 0 479 EN IEC 60947- Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor- 2019 CENELEC 0 4-1 starters 480 EN IEC 60947- Low-voltage switchgear and controlgear Part 7-4: Ancillary equipment _ PCB terminal blocks for copper conductors 2019 CENELEC 0 7-4 481 EN IEC 60947- Low-voltage switchgear and controlgear Part 9-1: Active arc-fault mitigation systems _ Arc quenching devices 2019 CENELEC 0 9-1 482 EN IEC 60964 Nuclear Power Plants - Control rooms - Design - CORR: August 31, 2019 2019 CENELEC 0 483 EN IEC 60966- Radio frequency and coaxial cable assemblies Part 1: Generic specification - General requirements and test methods 2019 CENELEC 0 1 484 EN IEC 60974- Arc welding equipment Part 2: Liquid cooling systems 2019 CENELEC 0 2 485 EN IEC 60974- Arc welding equipment Part 3: Arc striking and stabilizing devices 2019 CENELEC 0 3 486 EN IEC 60974- Arc welding equipment Part 5: Wire feeders 2019 CENELEC 0 5 487 EN IEC 60974- Arc welding equipment Part 7: Torches 2019 CENELEC 0 7 488 EN IEC 61000- Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 2019 CENELEC 0 3-2 ?16 A per phase) 489 EN IEC 61000- Electromagnetic compatibility (EMC) Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in 2019 CENELEC 0 3-11 public low-voltage supply systems - Equipment with rated current ? 75 A and subject to conditional connection 490 EN IEC 61000- Electromagnetic compatibility (EMC) Part 4-18: Testing and measurement techniques - Damped oscillatory wave 2019 CENELEC 0 4-18 immunity test - CORR: October 31, 2019 491 EN IEC 61000- Electromagnetic compatibility (EMC) Part 6-1: Generic standards - Immunity standard for residential, commercial and 2019 CENELEC 0 6-1 light-industrial environments - CORR: March 31, 2019 492 EN IEC 61000- Electromagnetic compatibility (EMC) Part 6-2: Generic standards - Immunity standard for industrial environments - 2019 CENELEC 0 6-2 CORR: March 31, 2019 493 EN IEC 61000- Electromagnetic compatibility (EMC) Part 6-4: Generic standards - Emission standard for industrial environments 2019 CENELEC 0 6-4 494 EN IEC 61020- Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification 2019 CENELEC 0 1 495 EN IEC 61058- Switches for appliances Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, 2019 CENELEC 0 2-6 transportable tools and lawn and garden machinery 496 EN IEC 61076- Connectors for electrical and electronic equipment - Product requirements Part 3-123: Rectangular connectors - Detail 2019 CENELEC 0 3-123 specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locki 497 EN IEC 61076- Connectors for electrical and electronic equipment - Product requirements Part 3-124: Rectangular connectors - Detail 2019 CENELEC 0 3-124 Specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz 498 EN IEC 61131- NULL 2019 CENELEC 0 10 499 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 1: Overview and guidance for the IEC 61158 and IEC 2019 CENELEC 0 1 61784 series 500 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 3-4: Data-link layer service definition - Type 4 elements 2019 CENELEC 0 3-4 501 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 3-12: Data-link layer service definition - Type 12 2019 CENELEC 0 3-12 elements 502 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 3-19: Data-link layer service definition - Type 19 2019 CENELEC 0 3-19 elements 503 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 3-21: Data-link layer service definition - Type 21 2019 CENELEC 0 3-21 elements 504 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 3-25: Data-link layer service definition - Type 25 2019 CENELEC 0 3-25 elements 505 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 4-2: Data-link layer protocol specification - Type 2 2019 CENELEC 0 4-2 elements 506 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 4-3: Data-link layer protocol specification - Type 3 2019 CENELEC 0 4-3 elements 507 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 4-4: Data-link layer protocol specification - Type 4 2019 CENELEC 0 4-4 elements 508 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 4-12: Data-link layer protocol specification - Type 12 2019 CENELEC 0 4-12 elements 509 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 4-19: Data-link layer protocol specification - Type 19 2019 CENELEC 0 4-19 elements 510 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 4-21: Data-link layer protocol specification - Type 21 2019 CENELEC 0 4-21 elements 511 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 4-24: Data-link layer protocol specification - Type 24 2019 CENELEC 0 4-24 elements 512 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 4-25: Data-link layer protocol specification - Type 25 2019 CENELEC 0 4-25 elements 513 EN IEC 61158- Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 2019 CENELEC 0 5-2 elements 514 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 5-4: Application layer service definition - Type 4 2019 CENELEC 0 5-4 elements 515 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 5-10: Application layer service definition - Type 10 2019 CENELEC 0 5-10 elements 516 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 5-12: Application layer service definition - Type 12 2019 CENELEC 0 5-12 elements 517 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 5-19: Application layer service definition - Type 19 2019 CENELEC 0 5-19 elements 518 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 5-21: Application layer service definition - Type 21 2019 CENELEC 0 5-21 elements 519 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 5-23: Application layer service definition - Type 23 2019 CENELEC 0 5-23 elements 520 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 5-25: Application layer service definition - Type 25 2019 CENELEC 0 5-25 elements 521 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 5-26: Application layer service definition - Type 26 2019 CENELEC 0 5-26 elements 522 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 6-2: Application layer protocol specification - Type 2 2019 CENELEC 0 6-2 elements 523 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 6-3: Application layer protocol specification - Type 3 2019 CENELEC 0 6-3 elements 524 EN IEC 61158- Industrial communication networks _ Fieldbus specifications Part 6-4: Application layer protocol specification _ Type 4 2019 CENELEC 0 6-4 elements 525 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 6-10: Application layer protocol specification - Type 10 2019 CENELEC 0 6-10 elements 526 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 6-12: Application layer protocol specification - Type 12 2019 CENELEC 0 6-12 elements 527 EN IEC 61158- Industrial communication networks - Fieldbus specifications Part 6-19: Application layer protocol specification - Type 19 2019 CENELEC 0 6-19 elements 528 EN IEC 61158- Industrial Communication Networks - Fieldbus Specifications Part 6-21: Application layer protocol specification - Type 21 2019 CENELEC 0 6-21 elements 529 EN IEC 61158- Industrial communication networks _ Fieldbus specifications Part 6-23: Application layer protocol specification _ Type 23 2019 CENELEC 0 6-23 elements 530 EN IEC 61158- Industrial communication networks _ Fieldbus specifications Part 6-25: Application layer protocol specification _ Type 25 2019 CENELEC 0 6-25 elements 531 EN IEC 61158- Industrial communication networks _ Fieldbus specifications Part 6-26: Application layer protocol specification _ Type 26 2019 CENELEC 0 6-26 elements 532 EN IEC 61169- Radio-frequency connectors Part 1-2: Electrical test methods - Insertion loss 2019 CENELEC 0 1-2 533 EN IEC 61169- Radio-frequency connectors Part 24: Sectional specification _ Radio frequency coaxial connectors with screw coupling, 2019 CENELEC 0 24 typically for use in 75 O cable networks (type F) 534 EN IEC 61169- Radio frequency connectors Part 64: Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outer 2019 CENELEC 0 64 conductor - Characteristic impedance 50 ? (type 0,8) 535 EN IEC 61207- Expression of performance of gas analyzers Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical 2019 CENELEC 0 2 sensors 536 EN IEC 61207- Gas analyzers - Expression of performance Part 3: Paramagnetic oxygen analyzers 2019 CENELEC 0 3 537 EN IEC 61223- Evaluation and routine testing in medical imaging departments Part 3-5: Acceptance tests and and constancy tests _ 2019 CENELEC 0 3-5 Imaging performance of computed tomography X-ray equipment 538 EN IEC 61238- Compression and mechanical connectors for power cables Part 1-1: Test methods and requirements for compression and 2019 CENELEC 0 1-1 mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors 539 EN IEC 61238- Compression and mechanical connectors for power cables Part 1-2: Test methods and requirements for insulation piercing 2019 CENELEC 0 1-2 connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors 540 EN IEC 61280- Fibre optic communication subsystem test procedures Part 4_1: Installed cable plant - Multimode attenuation measurement 2019 CENELEC 0 4-1 541 EN IEC 61300- Fibre optic interconnecting devices and passive components _ Basic test and measurement procedures Part 2-4: Tests _ 2019 CENELEC 0 2-4 Fibre or cable retention 542 EN IEC 61300- Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-46: Tests - 2019 CENELEC 0 2-46 Damp heat cyclic 543 EN IEC 61300- Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-21: 2019 CENELEC 0 3-21 Examinations and measurements - Switching time 544 EN IEC 61300- Fibre optic interconnecting devices and passive components _ Basic test and measurement procedures Part 3-54: 2019 CENELEC 0 3-54 Examinations and measurements _ Angular misalignment between ferrule bore axis and ferrule axis for cylindrical ferrules 545 EN IEC 61315 Calibration of Fibre-Optic Power Meters 2019 CENELEC 0 546 EN IEC 61400- Wind energy generation systems Part 1: Design requirements - CORR: October 31, 2019 2019 CENELEC 0 1 547 EN IEC 61400- Wind energy generation systems Part 3-1: Design requirements for fixed offshore wind turbines 2019 CENELEC 0 3-1 548 EN IEC 61400- Wind energy generation systems Part 21-1: Measurement and assessment of electrical characteristics _ Wind turbines 2019 CENELEC 0 21-1 549 EN IEC 61400- Wind energy generation systems Part 24: Lightning protection 2019 CENELEC 0 24 550 EN IEC 61400- Wind energy generation systems Part 26-1: Availability for wind energy generation systems 2019 CENELEC 0 26-1 551 EN IEC 61482- Live working - Protective clothing against the thermal hazards of an electric arc Part 1-1: Test methods - Method 1: 2019 CENELEC 0 1-1 Determination of the arc rating (ELIM, ATPV and/or EBT) of clothing materials and of protective clothing using an open arc 552 EN IEC 61496- Safety of Machinery - Electro-Sensitive Protective Equipment Part 3: Particular Requirements for Active Opto-Electronic 2019 CENELEC 0 3 Protective Devices Responsive to Diffuse Reflection (AOPDDR) 553 EN IEC 61500 Nuclear power plants - Instrumentation and control systems important to safety - Data communication in systems 2019 CENELEC 0 performing category A functions 554 EN IEC 61558- Safety of transformers, reactors, power supply units and combinations thereof Part 1: General requirements and tests 2019 CENELEC 0 1 555 EN IEC 61754- Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 7-3: Type MPO 2019 CENELEC 0 7-3 connector family - Two fibre rows 16 fibre wide 556 EN IEC 61784- Industrial communication networks _ Profiles Part 2: Additional fieldbus profiles for real-time networks based on 2019 CENELEC 0 2 ISO/IEC/IEEE 8802-3 557 EN IEC 61810- Electromechanical elementary relays Part 10: Additional functional aspects and safety requirements for high-capacity 2019 CENELEC 0 10 relays 558 EN IEC 61820- Electrical installations for aeronautical ground lighting at aerodromes Part 1: Fundamental principles 2019 CENELEC 0 1 559 EN IEC 61850- Communication networks and systems for power utility automation Part 8-2: Specific Communication Service Mapping 2019 CENELEC 0 8-2 (SCSM) - Mapping to Extensible Messaging Presence Protocol (XMPP) 560 EN IEC 61851- Electric vehicle conductive charging system Part 1: General requirements 2019 CENELEC 0 1 561 EN IEC 61857- Electrical insulation systems - Procedures for thermal evaluation Part 32: Multifactor evaluation with increased factors 2019 CENELEC 0 32 during diagnostic testing 562 EN IEC 61869- Instrument transformers Part 9: Digital interface for instrument transformers 2019 CENELEC 0 9 563 EN IEC 61869- Instrument transformers Part 14: Additional requirements for current transformers for DC applications 2019 CENELEC 0 14 564 EN IEC 61869- Instrument transformers Part 15: Additional requirements for voltage transformers for DC applications 2019 CENELEC 0 15 565 EN IEC 61952- Insulators for overhead lines _ Composite line post insulators for AC systems with a nominal voltage greater than 1 000 V 2019 CENELEC 0 1 Part 1: Definitions, end fittings and designations 566 EN IEC 61967- Integrated circuits - Measurement of electromagnetic emissions Part 1: General conditions and definitions 2019 CENELEC 0 1 567 EN IEC 61968- Application integration at electric utilities - System interfaces for distribution management Part 4: Interfaces for records and 2019 CENELEC 0 4 asset management 568 EN IEC 62025- High frequency inductive components _ Non-electrical characteristics and measuring methods Part 2: Test methods for 2019 CENELEC 0 2 non-electrical characteristics 569 EN IEC 62026- Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) Part 1: General rules 2019 CENELEC 0 1 570 EN IEC 62040- Uninterruptible power systems (UPS) Part 1: Safety requirements - CORR: November 30, 2019 2019 CENELEC 0 1 571 EN IEC 62056- Electricity metering data exchange - the DLMS/COSEM suite Part 8-4: Communication profiles for narrow-band OFDM 2019 CENELEC 0 8-4 PLC PRIME neighbourhood networks 572 EN IEC 62087- Audio, video, and related equipment - Methods of measurement for power consumption Part 7: Computer monitors 2019 CENELEC 0 7 573 EN IEC 62097 Hydraulic machines, radial and axial _ Methodology for performance transposition from model to prototype 2019 CENELEC 0 574 EN IEC 62129- Calibration of wavelength/optical frequency measurement instruments Part 3: Optical frequency meters internally 2019 CENELEC 0 3 referenced to a frequency comb 575 EN IEC 62138 Nuclear power plants _ Instrumentation and control systems important to safety _ Software aspects for computer-based 2019 CENELEC 0 systems performing category B or C functions 576 EN IEC 62148- Fibre optic active components and devices - Package and interface standards Part 19: Photonic chip scale package 2019 CENELEC 0 19 577 EN IEC 62148- Fibre optic active components and devices - Package and interface standards Part 21: Design guide of electrical interface of 2019 CENELEC 0 21 PIC packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S-FLGA) 578 EN IEC 62209- Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from 2019 CENELEC 0 3 hand-held and body-mounted wireless communication devices Part 3: Vector measurement-based systems (Frequency range of 600 MHz to 6 GHz) 579 EN IEC 62228- Integrated circuits - EMC evaluation of transceivers Part 3: CAN transceivers 2019 CENELEC 0 3 580 EN IEC 62271- High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV 2019 CENELEC 0 107 up to and including 52 kV 581 EN IEC 62271- High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches 2019 CENELEC 0 109 582 EN IEC 62271- High-voltage switchgear and controlgear Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated 2019 CENELEC 0 209 voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations 583 EN IEC 62271- High-voltage switchgear and controlgear Part 214: Internal arc classification for metal-enclosed pole-mounted switchgear 2019 CENELEC 0 214 and controlgear for rated voltages above 1 kV and up to and including 52 kV 584 EN IEC 62275 Cable management systems - Cable ties for electrical installations 2019 CENELEC 0 585 EN IEC 62281 Safety of primary and secondary lithium cells and batteries during transport 2019 CENELEC 0 586 EN IEC 62282- Fuel cell technologies Part 6-400: Micro fuel cell power systems _ Power and data interchangeability 2019 CENELEC 0 6-400 587 EN IEC 62290- Railway applications - Urban guided transport management and command/control systems Part 3: System requirements 2019 CENELEC 0 3 specification 588 EN IEC 62327 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for 2019 CENELEC 0 the estimation of ambient dose equivalent rate from photon radiation 589 EN IEC 62343- Dynamic modules Part 1: Performance standards - General conditions 2019 CENELEC 0 1 590 EN IEC 62343- Dynamic modules Part 2-1: Reliability qualification - Test template 2019 CENELEC 0 2-1 591 EN IEC 62364 Hydraulic machines _ Guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines 2019 CENELEC 0 592 EN IEC 62386- NULL 2019 CENELEC 0 104 593 EN IEC 62386- Digital addressable lighting interface Part 220: Particular requirements for control gear - Centrally supplied emergency 2019 CENELEC 0 220 operation (device type 19) 594 EN IEC 62402 Obsolescence management 2019 CENELEC 0 595 EN IEC 62433- EMC IC modelling Part 1: General modelling framework 2019 CENELEC 0 1 596 EN IEC 62474 Material declaration for products of and for the electrotechnical industry 2019 CENELEC 0 597 EN IEC 62496- Optical circuit boards Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelve- 2019 CENELEC 0 4-1 channel PMT connectors 598 EN IEC 62631- Dielectric and resistive properties of solid insulating materials Part 3-4: Determination of resistive properties (DC methods) 2019 CENELEC 0 3-4 - Volume resistance and volume resistivity at elevated temperatures 599 EN IEC 62660- Secondary lithium-ion cells for the propulsion of electric road vehicles Part 1: Performance testing 2019 CENELEC 0 1 600 EN IEC 62660- Secondary lithium-ion cells for the propulsion of electric road vehicles Part 2: Reliability and abuse testing 2019 CENELEC 0 2 601 EN IEC 62668- Process management for avionics _ Counterfeit prevention Part 1: Avoiding the use of counterfeit, fraudulent and recycled 2019 CENELEC 0 1 electronic components 602 EN IEC 62668- Process management for avionics _ Counterfeit prevention Part 2: Managing electronic components from non-franchised 2019 CENELEC 0 2 sources 603 EN IEC 62676- Video surveillance systems for use in security applications Part 2-31: Live streaming and control based on web services 2019 CENELEC 0 2-31 604 EN IEC 62676- Video surveillance systems for use in security applications Part 2-32: Recording control and replay based on web services 2019 CENELEC 0 2-32 605 EN IEC 62677- Heat-shrinkable low and medium voltage moulded shapes Part 3: Specification for individual materials _ Sheet 103: Heat- 2019 CENELEC 0 3-103 shrinkable, polyolefin, conductive moulded shapes for medium voltage applications 606 EN IEC 62680- Universal serial bus interfaces for data and power Part 1-5: Common components _ USB Audio 3.0 device class definition 2019 CENELEC 0 1-5 607 EN IEC 62680- Universal serial bus interfaces for data and power Part 1-6: Common components _ USB Audio 3.0 device class definition 2019 CENELEC 0 1-6 basic functions 608 EN IEC 62680- Universal serial bus interfaces for data and power Part 1-7: Common components _ USB Audio 3.0 device class definition 2019 CENELEC 0 1-7 data formats 609 EN IEC 62680- Universal serial bus interfaces for data and power Part 1-8: Common components _ USB Audio 3.0 device class definition 2019 CENELEC 0 1-8 terminal types 610 EN IEC 62812 Low resistance measurements - Methods and guidance 2019 CENELEC 0 611 EN IEC 62840- Electric vehicle battery swap system Part 2: Safety requirements 2019 CENELEC 0 2 612 EN IEC 62878- Device embedding assembly technology Part 1: Generic specification for device embedded substrates 2019 CENELEC 0 1 613 EN IEC 62878- Device embedding assembly technology Part 2-5: Guidelines _ Implementation of a 3D data format for device embedded 2019 CENELEC 0 2-5 substrate 614 EN IEC 62884- Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Part 4: Short-term frequency stability test 2019 CENELEC 0 4 methods 615 EN IEC 62885- Surface cleaning appliances Part 8: Dry vacuum cleaners for commercial use _ Methods for measuring the performance 2019 CENELEC 0 8 616 EN IEC 62885- Surface cleaning appliances Part 9: Floor treatment machines with or without traction drive, for commercial use _ Methods 2019 CENELEC 0 9 for measuring the performance 617 EN IEC 62892 Extended thermal cycling of PV modules _ Test procedure 2019 CENELEC 0 618 EN IEC 62902 Secondary cells and batteries - Marking symbols for identification of their chemistry 2019 CENELEC 0 619 EN IEC 62909- Bi-directional grid-connected power converters Part 2: Interface of GCPC and distributed energy resources 2019 CENELEC 0 2 620 EN IEC 62962 Particular requirements for load-shedding equipment (LSE) 2019 CENELEC 0 621 EN IEC 62966- Mechanical structures for electrical and electronic equipment _ Aisle containment for IT cabinets Part 1: Dimensions and 2019 CENELEC 0 1 mechanical requirements 622 EN IEC 62985 Methods for calculating size specific dose estimates (SSDE) on computed tomography 2019 CENELEC 0 623 EN IEC 63006 Wireless power transfer (WPT) - Glossary of terms 2019 CENELEC 0 624 EN IEC 63009 Ultrasonics _ Physiotherapy systems _ Field specifications and methods of measurement in the frequency range 20 kHz to 2019 CENELEC 0 500 kHz 625 EN IEC 63012 NULL 2019 CENELEC 0 626 EN IEC 63013 LED packages _ Long-term luminous and radiant flux maintenance projection 2019 CENELEC 0 627 EN IEC 63033- Car multimedia systems and equipment - Drive monitoring system Part 2: Recording methods of the drive monitoring 2019 CENELEC 0 2 system 628 EN IEC 63033- Car multimedia systems and equipment - Drive monitoring system Part 3: Measurement methods 2019 CENELEC 0 3 629 EN IEC 63044- Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-1: EMC 2019 CENELEC 0 5-1 requirements, conditions and test set-up 630 EN IEC 63044- Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 5-2: EMC 2019 CENELEC 0 5-2 requirements for HBES/BACS used in residential, commercial and light-industrial environments 631 EN IEC 63044- Home and building electronic systems (HBES) and building automation and control systems (BACS) Part 5-3: EMC 2019 CENELEC 0 5-3 requirements for HBES/BACS used in industrial environments 632 EN IEC 63093- Ferrite cores - Guidelines on dimensions and the limits of surface irregularities Part 4: RM-cores 2019 CENELEC 0 4 633 EN IEC 63093- Draft BS EN 63093-12 Ferrite cores - Guidelines on dimensions and the limits of surface irregularities.Part 12: Ring-cores 2019 CENELEC 0 12 634 EN IEC 63093- Ferrite cores _ Guidelines on dimensions and the limits of surface irregularities Part 13: PQ-cores 2019 CENELEC 0 13 635 EN IEC 63093- Ferrite cores _ Guidelines on dimensions and the limits of surface irregularities Part 14: EFD-cores 2019 CENELEC 0 14 636 EN IEC 63119- Information exchange for electric vehicle charging roaming service Part 1: General 2019 CENELEC 0 1 637 EN IEC 63128 Lighting control interface for dimming _ Analogue voltage dimming interface for electronic current sourcing controlgear 2019 CENELEC 0 638 EN IEC 63135 Maritime navigation and radiocommunication equipment and systems _ Automatic identification systems (AIS) _ SAR 2019 CENELEC 0 Airborne equipment _ Operational and performance requirements, methods of test and required test results 639 EN IEC 63136 Electric dishwashers for commercial use - Test methods for measuring the performance 2019 CENELEC 0 640 EN IEC 63137- Standard test radio-frequency connectors Part 1: Generic specification - General requirements and test methods 2019 CENELEC 0 1 641 EN IEC 63138- Multi-channel radio frequency connectors Part 1: Generic specification - General requirements and test methods 2019 CENELEC 0 1 642 EN IEC 63146 NULL 2019 CENELEC 0 643 EN IEC 63202- Photovoltaic cells Part 1: Measurement of light-induced degradation of crystalline silicon photovoltaic cells 2019 CENELEC 0 1 644 EN IEC 80601- Medical electrical equipment Part 2-30: Particular requirements for the basic safety and essential performance of automated 2019 CENELEC 0 2-30 non-invasive sphygmomanometers 645 EN IEC 80601- Medical electrical equipment Part 2-49: Particular requirements for the basic safety and essential performance of 2019 CENELEC 0 2-49 multifunction patient monitoring equipment 646 EN IEC 80601- Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential performance of screening 2019 CENELEC 0 2-59 thermographs for human febrile temperature screening 647 EN IEC 81346- Industrial systems, installations and equipment and industrial products _ Structuring principles and reference designations 2019 CENELEC 0 2 Part 2: Classification of objects and codes for classes 648 EN ISO 5398-4 NULL 2019 CENELEC 0 649 EN ISO 7263-1 NULL 2019 CENELEC 0 650 EN ISO 7263-2 NULL 2019 CENELEC 0 651 EN ISO 7886-4 Sterile hypodermic syringes for single use Part 4: Syringes with re-use prevention feature 2019 CENELEC 0 652 EN ISO 8384 Ships and Marine Technology - Dredgers - Vocabulary - CORR 13356: September 2001 2019 CENELEC 0 653 EN ISO 9697 NULL 2019 CENELEC 0 654 EN ISO 9994 NULL 2019 CENELEC 0 655 EN ISO 14064- Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of 2019 CENELEC 0 1 greenhouse gas emissions and removals - CORR: June 30, 2012 656 EN ISO 14064- Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of 2019 CENELEC 0 2 greenhouse gas emission reductions or removal enhancements - CORR: June 30, 2012 657 EN ISO 14064- Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions - 2019 CENELEC 0 3 CORR: April 30, 2012 658 EN ISO 14405- Geometrical product specifications (GPS) - Dimensional tolerancing Part 2: Dimensions other than linear sizes 2019 CENELEC 0 2 659 EN ISO 15195 NULL 2019 CENELEC 0 660 EN ISO 17226- Leather - Chemical determination of formaldehyde content Part 1: Method using high performance liquid chromatography 2019 CENELEC 0 1 661 EN ISO 17226- Leather - Chemical determination of formaldehyde content Part 2: Method using colorimetric analysis - CORR: January 31, 2019 CENELEC 0 2 2010 662 EN ISO 18254- NULL 2019 CENELEC 0 2 663 EN ISO 20166- NULL 2019 CENELEC 0 3 664 HD 60364-8-1 Low-voltage electrical installations Part 8-1: Energy efficiency 2019 CENELEC 0 665 ISO 16900?1 NULL 2019 CENELEC 0 666 ISO 20468-2 NULL 2019 CENELEC 0 667 PAS 2035-2030 Online - 1 Licence 2019 CENELEC 0 668 PAS 2035-2030 Online - 1 Licence 2019 CENELEC 0 669 PD CLC IEC- Field device tool (FDT) interface specification Part 52-31: Communication implementation for common language 2019 CENELEC 0 TR 62453-52- infrastructure - IEC 61784 CP 3/1 and CP 3/2 31 670 PD CLC IEC- Field device tool (FDT) interface specification Part 52-32: Communication implementation for common language 2019 CENELEC 0 TR 62453-52- infrastructure - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 32 671 PD CLC IEC- Field device tool (FDT) interface specification Part 52-90: Communication implementation for common language 2019 CENELEC 0 TR 62453-52- infrastructure - IEC 61784 CPF 9 90 672 PD CLC-TR Information technology - Data centre facilities and infrastructures Part 99-1: Recommended practices for energy 2019 CENELEC 0 50600-99-1 management 673 PD CLC-TR Information technology - Data centre facilities and infrastructures Part 99-2: Recommended practices for environmental 2019 CENELEC 0 50600-99-2 sustainability 674 PD CLC-TR Field device tool (FDT) interface specification Part 51-20: Communication implementation for common object model _ 2019 CENELEC 0 62453-51-20 IEC 61784 CPF 2 675 PD CLC-TR Field device tool (FDT) interface specification Part 51-32: Communication implementation for common object model - IEC 2019 CENELEC 0 62453-51-32 61784 CP 3/4, CP 3/5 and CP 3/6 676 PD CLC-TR Field device tool (FDT) interface specification Part 51-60: Communication implementation for common object model - IEC 2019 CENELEC 0 62453-51-60 61784 CPF 6 677 PD CLC-TR Field device tool (FDT) interface specification - Part 41: Object model integration profile - Common object model 2019 CENELEC 0 IEC 62453-41 678 PD CLC-TR Field device tool (FDT) interface specification Part 51-10: Communication implementation for common object model _ 2019 CENELEC 0 IEC 62453-51- IEC 61784 CPF 1 10 679 PD CLC-TS NULL 2019 CENELEC 0 50238-3 680 PD CLC-TS Open Smart Grid Protocol (OSGP) 2019 CENELEC 0 50586 681 PD CLC-TS Clothes washing machines and washer-dryers for household and similar use - Method for the determination of rinsing 2019 CENELEC 0 50677 effectiveness by measurement of the surfactant content at textile materials 682 EN 50083-2-4 NULL 2019 CENELEC 0 683 EN 50121-3-2- NULL 2019 CENELEC 0 2016+A1 684 EN 50121-4- NULL 2019 CENELEC 0 2016+A1 685 EN 50325-1 Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces Part 1: General 2019 CENELEC 0 requirements 686 EN 50341-2-24 NULL 2019 CENELEC 0 687 EN 50411-3-3 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-3: 2019 CENELEC 0 Singlemode optical fibre fusion splice protectors 688 EN 50411-3-4 Fibre management systems and protective housings to be used in optical fibre communication systems _ Product 2019 CENELEC 0 specifications Part 3-4: Wall box for splice to patchcord connections, for category C and A 689 EN 50676 NULL 2019 CENELEC 0 690 EN 60188- NULL 2019 CENELEC 0 2001+A11 691 EN 60317-20- NULL 2019 CENELEC 0 2014+A1 692 EN 60317-21- NULL 2019 CENELEC 0 2014+A1 693 EN 60601-2-63- NULL 2019 CENELEC 0 2015+A1 694 EN 60662- NULL 2019 CENELEC 0 2012+A11 695 EN IEC 62909- Bi-directional grid-connected power converters - Part 1: General requirements 2018 CENELEC 0 1 696 EN IEC 62919 Content management - Monitoring and management of personal digital content 2018 CENELEC 0 697 EN IEC 60332- Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically- 2018 CENELEC 0 3-21 mounted bunched wires or cables - Category A F/R 698 EN IEC 63032 Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification 2018 CENELEC 0 699 EN IEC 62485- Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries 2018 CENELEC 0 2 700 EN IEC 60375 Conventions concerning electric circuits 2018 CENELEC 0 701 EN IEC 61869- Instrument transformers - Part 11: Additional requirements for low-power passive voltage transformers 2018 CENELEC 0 11 702 EN 60598-2-4 Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires 2018 CENELEC 0 703 EN IEC 60721- Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and 2018 CENELEC 0 2-4 temperature 704 EN 62841-2-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular 2018 CENELEC 0 requirements for hand-held drills and impact drills 705 EN IEC-IEEE NULL 2018 CENELEC 0 65700-19-03 706 EN IEC 61970- Energy management system application program interface (EMS-API) Part 302: Common information model (CIM) 2018 CENELEC 0 302 dynamics 707 EN 50064 High-voltage switchgear and controlgear _ Gas-filled wrought aluminium and aluminium alloy enclosures 2018 CENELEC 0 708 EN 50068 High-Voltage Switchgear and Controlgear _ Gas-filled wrought steel enclosures 2018 CENELEC 0 709 EN 50069 High-voltage switchgear and controlgear - Gas-filled welded composite enclosures of cast and wrought aluminium alloys 2018 CENELEC 0 710 EN 50129 Railway applications _ Communication, signalling and processing systems _ Safety related electronic systems for 2018 CENELEC 0 signalling - CORR: May 31, 2019 711 EN 50318 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph 2018 CENELEC 0 and overhead contact line 712 EN 50341-2-12 Overhead electrical lines exceeding AC 1 kV Part 2-12: National Normative Aspects (NNA) for ICELAND (based on EN 2018 CENELEC 0 50341-1:2012) 713 EN 62784 Vacuum cleaners and dust extractors providing equipment protection level Dc for the collection of combustible dusts _ 2018 CENELEC 0 Particular requirements 714 EN IEC 60034- Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher _ 2018 CENELEC 0 14 Measurement, evaluation and limits of vibration severity 715 EN IEC 60076- Power transformers Part 11: Dry-type transformers 2018 CENELEC 0 11 716 EN IEC 60268- Sound system equipment Part 4: Microphones 2018 CENELEC 0 4 717 EN IEC 60297- Mechanical structures for electrical and electronic equipment _ Dimensions of mechanical structures of the 482,6 mm (19 2018 CENELEC 0 3-110 in) series Part 3-110: Residential racks and cabinets for smart houses 718 EN IEC 60358- Coupling capacitors and capacitor dividers Part 4: DC and AC single-phase capacitor dividers 2018 CENELEC 0 4 719 EN IEC 60404- Magnetic materials Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and 2018 CENELEC 0 13 sheet 720 EN IEC 60512- Connectors for electrical and electronic equipment _ Tests and measurements Part 1: Generic specification 2018 CENELEC 0 1 721 EN IEC 60793- Optical fibres Part 1-49: Measurement methods and test procedures - Differential mode delay 2018 CENELEC 0 1-49 722 EN IEC 60794- Optical fibre cables Part 4-20: Sectional specification _ Aerial optical cables along electrical power lines _ Family 2018 CENELEC 0 4-20 specification for ADSS (all dielectric self-supported) optical cables 723 EN IEC 60974- Arc welding equipment Part 14: Calibration, validation and consistency testing - CORR: January 31, 2019 2018 CENELEC 0 14 724 EN IEC 61051- Varistors for use in electronic equipment Part 1: Generic specification 2018 CENELEC 0 1 725 EN IEC 61191- Printed Board Assemblies Part 1: Generic Specification - Requirements for Soldered Electrical and Electronic Assemblies 2018 CENELEC 0 1 Using Surface Mount and Related Assembly Technologies 726 EN IEC 61326- Electrical equipment for measurement, control and laboratory use - EMC requirements Part 3_2: Immunity requirements 2018 CENELEC 0 3-2 for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications wit 727 EN IEC 61340- Electrostatics Part 6-1: Electrostatic control for healthcare - General requirements for facilities 2018 CENELEC 0 6-1 728 EN IEC 61375- Electronic railway equipment - Train communication network (TCN) Part 2-6: On-board to ground communication 2018 CENELEC 0 2-6 729 EN IEC 61753- Fibre optic interconnecting devices and passive components _ Performance standard Part 1: General and guidance - CORR: 2018 CENELEC 0 1 July 31, 2019 730 EN IEC 61784- Industrial communication networks - Profiles Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 2018 CENELEC 0 5-3 731 EN IEC 61788- Superconductivity Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires 2018 CENELEC 0 25 732 EN IEC 61853- Photovoltaic (PV) module performance testing and energy rating Part 3: Energy rating of PV modules 2018 CENELEC 0 3 733 EN IEC 61853- Photovoltaic (PV) module performance testing and energy rating Part 4: Standard reference climatic profiles 2018 CENELEC 0 4 734 EN IEC 61918 NULL 2018 CENELEC 0 735 EN IEC 61993- Maritime navigation and radiocommunication equipment and systems _ Automatic Identification Systems (AIS) Part 2: 2018 CENELEC 0 2 Class A shipborne equipment of the automatic identification system (AIS) _ Operational and performance requirements, methods of test and requ 736 EN IEC 62005- Fibre optic interconnecting devices and passive components _ Reliability Part 9-4: High power qualification of passive 2018 CENELEC 0 9-4 optical components for environmental category C 737 EN IEC 62149- Fibre optic active components and devices - Performance standards Part 10: Radio-over-fibre (RoF) transceivers for mobile 2018 CENELEC 0 10 fronthaul 738 EN IEC 62239- Process management for avionics - Management plan Part 1: Preparation and maintenance of an electronic components 2018 CENELEC 0 1 management plan 739 EN IEC 62325- Framework for energy market communications Part 503: Market data exchanges guidelines for the IEC 62325-351 profile 2018 CENELEC 0 503 740 EN IEC 62435- Electronic components - Long-term storage of electronic semiconductor devices Part 6: Packaged or finished devices 2018 CENELEC 0 6 741 EN IEC 62746- Systems interface between customer energy management system and the power management system Part 10-3: Open 2018 CENELEC 0 10-3 automated demand response _ Adapting smart grid user interfaces to the IEC common information model 742 EN IEC 62862- Solar thermal electric plants Part 3-2: Systems and components _ General requirements and test methods for large-size 2018 CENELEC 0 3-2 parabolic-trough collectors 743 EN IEC 62881 Cause and effect matrix - CORR: July 31, 2019 2018 CENELEC 0 744 EN IEC 62923- Maritime navigation and radiocommunication equipment and systems _ Bridge alert management Part 1: Operational and 2018 CENELEC 0 1 performance requirements, methods of testing and required test results 745 EN IEC 62923- Maritime navigation and radiocommunication equipment and systems _ Bridge alert management Part 2: Alert and cluster 2018 CENELEC 0 2 identifiers and other additional features 746 EN IEC 62961 Insulating liquids - Test methods for the determination of interfacial tension of insulating liquids - Determination with the 2018 CENELEC 0 ring method 747 EN IEC 63000 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous 2018 CENELEC 0 substances 748 EN 50341-2-20 Overhead electrical lines exceeding AC 45 kV Part 2-20: National Normative Aspects (NNA) for ESTONIA (based on EN 2018 CENELEC 0 50341-1:2012) 749 EN IEC 60268- Sound system equipment Part 21: Acoustical (output-based) measurements 2018 CENELEC 0 21 750 EN IEC 60728- Cable networks for television signals, sound signals and interactive services Part 113: Optical systems for broadcast signal 2018 CENELEC 0 113 transmissions loaded with digital channels only 751 EN IEC 60793- Optical fibres Part 1-32: Measurement methods and test procedures - Coating strippability 2018 CENELEC 0 1-32 752 EN IEC 60869- Fibre optic interconnecting devices and passive components - Fibre optic passive power control Part 1: Generic 2018 CENELEC 0 1 specification 753 EN IEC 61784- Industrial communication networks - Profiles Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 2018 CENELEC 0 5-2 754 EN IEC 61784- Industrial communication networks - Profiles Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 2018 CENELEC 0 5-6 755 EN IEC 61784- Industrial communication networks _ Profiles Part 5-8: Installation of fieldbuses _ Installation profiles for CPF 8 2018 CENELEC 0 5-8 756 EN IEC 61784- Industrial communication networks - Profiles Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 2018 CENELEC 0 5-12 757 EN IEC 61784- Industrial communication networks _ Profiles Part 5-18: Installation of fieldbuses _ Installation profiles for CPF 18 2018 CENELEC 0 5-18 758 EN IEC 61784- Industrial communication networks - Profiles Part 5-20: Installation of fieldbuses - Installation profiles for CPF 20 2018 CENELEC 0 5-20 759 EN IEC 62351- Power systems management and associated information exchange _ Data and communications security Part 4: Profiles 2018 CENELEC 0 4 including MMS and derivatives 760 EN IEC 62885- Surface cleaning appliances Part 5: High pressure cleaners and steam cleaners for household and commercial use _ 2018 CENELEC 0 5 Methods for measuring performance 761 EN IEC 63093- Ferrite cores _ Guidelines on dimensions and the limits of surface irregularities Part 6: ETD-cores for use in power supplies 2018 CENELEC 0 6 762 EN IEC 63093- Ferrite cores _ Guidelines on dimensions and the limits of surface irregularities Part 8: E-cores 2018 CENELEC 0 8 763 EN 50342-1/A1 2018 CENELEC 0 764 EN 60846_2 2018 CENELEC 0 765 EN 61167 2018 CENELEC 0 766 EN 61784-5-21 2018 CENELEC 0 767 EN IEC 63093- 2018 CENELEC 0 5 768 EN IEC 60512- Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - 2018 CENELEC 0 15-2 Test 15b: Insert retention in housing (axial) 769 EN IEC 61189- Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-630: Test 2018 CENELEC 0 2-630 methods for materials for interconnection structures - Moisture absorption after pressure vessel conditioning 770 EN IEC 60793- Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation 2018 CENELEC 0 1-54 771 EN IEC 61290- Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power 2018 CENELEC 0 4-3 control 772 EN IEC 61340- Electrostatics Part 4-3: Standard Test Methods for Specific Applications - Footwear 2018 CENELEC 0 4-3 773 EN IEC 60068- Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) 2018 CENELEC 0 2-52 774 EN IEC 61076- Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail 2018 CENELEC 0 3-119 specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for dat 775 EN 50291-1 Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and 2018 CENELEC 0 performance requirements 776 EN IEC 62613- Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional 2018 CENELEC 0 2 compatibility and interchangeability requirements for accessories to be used by various types of ships 777 EN IEC 60068- Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of 2018 CENELEC 0 3-5 temperature chambers 778 EN IEC 61204- Low-voltage switch mode power supplies - Part 7: Safety requirements 2018 CENELEC 0 7 779 EN 50173-3 Information technology - Generic cabling systems - Part 3: Industrial spaces 2018 CENELEC 0 780 EN IEC 60317- Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class 2018 CENELEC 0 74 180 781 CLC/TR 50600- Information technology - Data centre facilities and infrastructures - Part 99-1: Recommended practices for energy 2018 CENELEC 0 99-1 management 782 EN 50527-2-2 Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical 2018 CENELEC 0 devices - Part 2-2: Specific assessment for workers with cardioverter defibrillators (ICDs) 783 EN IEC 63044- Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical 2018 CENELEC 0 3 safety requirements 784 EN IEC 61058- Switches for appliances - Part 1: General requirements 2018 CENELEC 0 1 785 EN 50174-2 Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings 2018 CENELEC 0 786 EN IEC 62677- Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test 2018 CENELEC 0 2 787 EN 50364 Product standard for human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 2018 CENELEC 0 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications 788 EN IEC 60332- Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically- 2018 CENELEC 0 3-23 mounted bunched wires or cables - Category B 789 EN IEC 60512- Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) 2018 CENELEC 0 8-3 - Test 8c: Robustness of actuating lever 790 EN IEC 62680- Universal Serial Bus interfaces for data and power - Part 1-4: Common Components - USB Type-C(tm) Authentication 2018 CENELEC 0 1-4 Specification 791 EN IEC 62485- Safety requirements for secondary batteries and battery installations - Part 1: General safety information 2018 CENELEC 0 1 792 EN IEC 63093- Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 11: EC-cores for use in power supply 2018 CENELEC 0 11 applications 793 EN IEC 60191- Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of 2018 CENELEC 0 1 discrete devices 794 EN IEC 63041- Piezoelectric sensors - Part 1: Generic specifications 2018 CENELEC 0 1 795 EN IEC 60900 Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC 2018 CENELEC 0 796 EN 50643 Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge 2018 CENELEC 0 equipment 797 EN IEC 61788- Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors 2018 CENELEC 0 23 798 EN IEC 62820- Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS) 2018 CENELEC 0 2 799 EN IEC 60404- Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder 2018 CENELEC 0 6 materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens 800 EN IEC 60230 Impulse tests on cables and their accessories 2018 CENELEC 0 801 EN IEC 61970- Energy management system application program interface (EMS-API) - Part 456: Solved power system state profiles 2018 CENELEC 0 456 802 EN IEC 60794- Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon 2018 CENELEC 0 1-31 803 EN IEC 61757 Fibre optic sensors - Generic specification 2018 CENELEC 0 804 EN 50173-4 Information technology - Generic cabling systems - Part 4: Homes 2018 CENELEC 0 805 EN IEC 61938 Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability 2018 CENELEC 0 806 EN IEC 61643- Components for low-voltage surge protective devices - Part 331: Performance requirements and test methods for metal 2018 CENELEC 0 331 oxide varistors (MOV) 807 EN IEC 62969- Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface 2018 CENELEC 0 1 for automotive vehicle sensors 808 EN 50640 Household and similar electric appliances - Methods for measuring the performance of clothes washing machines intended 2018 CENELEC 0 for commercial use 809 EN 50239 Railway applications - Radio remote control system of traction vehicle for shunting application 2018 CENELEC 0 810 EN IEC 60099- Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and 2018 CENELEC 0 8 distribution lines of a.c. systems above 1 kV 811 EN IEC 62610- Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 2018 CENELEC 0 2 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling 812 EN IEC 60238 Edison screw lampholders - Incorporates Amendment A1: 2018 2018 CENELEC 0 813 EN IEC 62056- Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes 2018 CENELEC 0 6-2 814 EN IEC 62386- Digital addressable lighting interface - Part 217: Particular requirements for control gear - Thermal gear protection (device 2018 CENELEC 0 217 type 16) 815 EN 50588-2 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 2: Transformers with 2018 CENELEC 0 cable boxes on the high-voltage and/or low-voltage side - General requirements for transformers with rated power less than or equal to 3 15 816 EN 50174-1 Information technology - Cabling installation - Part 1: Installation specification and quality assurance 2018 CENELEC 0 817 EN IEC 62559- Use case methodology - Part 3: Definition of use case template artefacts into an XML serialized format 2018 CENELEC 0 3 818 EN 50594 Household and similar electric appliances - Methods for measuring the performance of tumble dryers intended for 2018 CENELEC 0 commercial use 819 EN IEC 60942 Electroacoustics - Sound calibrators 2018 CENELEC 0 820 EN IEC 60749- Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere 2018 CENELEC 0 13 821 EN IEC 62677- Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: 2018 CENELEC 0 3-101 Heatshrinkable, polyolefin moulded shapes for low voltage applications 822 EN 50321-1 Live working - Footwear for electrical protection - Part 1: Insulating footwear and overboots 2018 CENELEC 0 823 EN IEC 62442- Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Method 2018 CENELEC 0 3 of measurement to determine the efficiency of controlgear 824 EN IEC 62386- Digital addressable lighting interface - Part 218: Particular requirements for control gear - Dimming curve selection (device 2018 CENELEC 0 218 type 17) 825 EN IEC 62228- Integrated circuits - EMC evaluation of transceivers - Part 1: General conditions and definitions 2018 CENELEC 0 1 826 EN IEC 60034- Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the stator winding insulation of 2018 CENELEC 0 27-1 rotating electrical machines 827 EN 63024 Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar 2018 CENELEC 0 uses 828 EN IEC 62386- Digital addressable lighting interface - Part 332: Particular requirements - Input devices - Feedback 2018 CENELEC 0 332 829 EN IEC 62386- Digital addressable lighting interface - Part 216: Particular requirements for control gear - Load referencing (device type 2018 CENELEC 0 216 15) 830 EN IEC 60598- Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and 2018 CENELEC 0 2-17 indoor) 831 EN IEC 60332- Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically- 2018 CENELEC 0 3-24 mounted bunched wires or cables - Category C 832 EN IEC 62435- Electronic components - Long-term storage of electronic semiconductor devices - Part 4: Storage 2018 CENELEC 0 4 833 EN IEC 62604- Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 2: Guidelines for the use 2018 CENELEC 0 2 834 EN IEC 61291- Optical amplifiers - Part 1: Generic specification 2018 CENELEC 0 1 835 EN IEC 62485- Safety requirements for secondary batteries and battery installations - Part 4: Valve-regulated lead-acid batteries for use in 2018 CENELEC 0 4 portable appliances 836 EN IEC 60376 Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in 2018 CENELEC 0 electrical equipment 837 EN IEC 61837- Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead 2018 CENELEC 0 2 connections - Part 2: Ceramic enclosures 838 EN IEC 62246- Reed switches - Part 1-1: Generic specification - Blank detail specification 2018 CENELEC 0 1-1 839 EN 60794-4 Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines 2018 CENELEC 0 840 EN IEC 60730- Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing controls 2018 CENELEC 0 2-13 841 EN IEC 60974- Arc welding equipment - Part 1: Welding power sources 2018 CENELEC 0 1 842 EN IEC 60749- Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency 2018 CENELEC 0 12 843 EN IEC 62969- Semiconductor devices - Semiconductor interface for automotive vehicles - Part 2: Efficiency evaluation methods of 2018 CENELEC 0 2 wireless power transmission using resonance for automotive vehicles sensors 844 EN IEC 61190- Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and 2018 CENELEC 0 1-3 non-fluxed solid solder for electronic soldering applications 845 EN IEC 62282- Fuel cell technologies - Part 5-100: Portable fuel cell power systems - Safety 2018 CENELEC 0 5-100 846 EN IEC 62688 Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification 2018 CENELEC 0 847 EN IEC 62442- Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine 2018 CENELEC 0 1 the total input power of controlgear circuits and the efficiency of the controlgear 848 EN IEC 62343- Dynamic modules - Part 5-2: Test methods - 1xN fixed-grid WSS - Dynamic crosstalk measurement 2018 CENELEC 0 5-2 849 EN IEC 62828- Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General 2018 CENELEC 0 1 procedures for all types of transmitters 850 EN IEC 62677- Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102: 2018 CENELEC 0 3-102 Heatshrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications 851 EN IEC 61970- Energy management system application program interface (EMS-API) - Part 302: Common information model (CIM) 2018 CENELEC 0 302 dynamics 852 EN IEC 61290- Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control 2018 CENELEC 0 4-4 853 EN IEC 62271- High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches 2018 CENELEC 0 102 854 EN IEC 62386- Digital addressable lighting interface - Part 224: Particular requirements for control gear - Non-replaceable light source 2018 CENELEC 0 224 (device type 23) 855 EN 50642 Cable management systems - Test method for content of halogens 2018 CENELEC 0 856 EN IEC 60974- Arc welding equipment - Part 9: Installation and use 2018 CENELEC 0 9 857 EN IEC 60332- Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically- 2018 CENELEC 0 3-25 mounted bunched wires or cables - Category D 858 EN 50131-2-10 Alarm systems - Intrusion and hold-up systems - Part 2-10: Intrusion detectors - Lock state contacts (magnetic) 2018 CENELEC 0 859 EN IEC 60099- Surge arresters - Part 5: Selection and application recommendations 2018 CENELEC 0 5 860 EN IEC 60068- Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of 2018 CENELEC 0 3-6 temperature/humidity chambers 861 EN IEC 61281- Fibre optic communication subsystems - Part 1: Generic specification 2018 CENELEC 0 1 862 EN IEC 60127- Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection 2018 CENELEC 0 8 863 EN IEC 62677- Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirements 2018 CENELEC 0 1 864 EN IEC 62969- Semiconductor devices - Semiconductor interface for automotive vehicles - Part 3: Shock driven piezoelectric energy 2018 CENELEC 0 3 harvesting for automotive vehicle sensors 865 EN IEC 61204- Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) 2018 CENELEC 0 3 866 EN IEC 62684 Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones 2018 CENELEC 0 867 EN IEC 60519- Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared 2018 CENELEC 0 12 electroheating 868 EN IEC 62928 Railway applications - Rolling stock - Onboard lithium-ion traction batteries 2018 CENELEC 0 869 EN IEC 60721- Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Fauna and flora 2018 CENELEC 0 2-7 870 EN IEC 61968- Application integration at electric utilities - System interfaces for distribution management - Part 3: Interface for network 2018 CENELEC 0 3 operations 871 EN 60350-2 Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance 2018 CENELEC 0 872 EN IEC 62576 Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics 2018 CENELEC 0 873 EN IEC 62443- Security for industrial automation and control systems - Part 4-1: Secure product development lifecycle requirements 2018 CENELEC 0 4-1 874 CEN/TR 17244 Water quality - Technical report for the management of diatom barcodes 2018 CENELEC 0 875 EN IEC 62439- Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) 2018 CENELEC 0 3 and High-availability Seamless Redundancy (HSR) 876 EN IEC 60749- Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing - 2018 CENELEC 0 26 Human body model (HBM) 877 EN IEC 61010- Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety 2018 CENELEC 0 2-120 requirements for machinery aspects of equipment 878 EN IEC 60721- Classification of environmental conditions - Part 3-1: Classification of groups of environmental parameters and their 2018 CENELEC 0 3-1 severities - Storage 879 EN IEC 62386- Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6) 2018 CENELEC 0 207 880 EN IEC 61788- Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room 2018 CENELEC 0 24 temperature of Ag-sheathed Bi-2223 superconducting wires 881 EN 50556 Road traffic signal systems 2018 CENELEC 0 882 EN IEC 61249- Materials for printed boards and other interconnecting structures - Part 2-46: Reinforced base materials clad and unclad - 2018 CENELEC 0 2-46 Nonhalogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity (1.5W/m K) and defined flammabilit 883 EN IEC 62933- Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification 2018 CENELEC 0 2-1 884 EN IEC 61987- Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 92: Lists 2018 CENELEC 0 92 of properties (LOP) of measuring equipment for electronic data exchange - Aspect LOPs 885 EN IEC 62325- Framework for energy market communications - Part 451-6: Publication of information on market, contextual and 2018 CENELEC 0 451-6 assembly models for European-style markets 886 EN IEC 62828- Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific 2018 CENELEC 0 2 procedures for pressure transmitters 887 EN 50562 Railway applications - Fixed installations - Process, protective measures and demonstration of safety for electric traction 2018 CENELEC 0 systems 888 EN 50107-3 Product standard covering luminous signs with discharge lamps and/or LED (light emitting diodes) and/or EL 2018 CENELEC 0 (electroluminescent) lightsources with a nominal voltage not exceeding 1000 V, with the exclusion of general lighting, traffic- or emergency related 889 EN 50271 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and 2018 CENELEC 0 tests for apparatus using software and/or digital technologies 890 EN IEC 63041- Piezoelectric sensors - Part 2: chemical and biochemical sensors 2018 CENELEC 0 2 891 EN 50173-2 Information technology - Generic cabling systems - Part 2: Office spaces 2018 CENELEC 0 892 EN IEC 62439- Industrial communication networks - High availability automation networks - Part 5: Beacon Redundancy Protocol (BRP) 2018 CENELEC 0 5 893 EN 60793-1-47 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss 2018 CENELEC 0 894 EN IEC 60404- Magnetic materials - Part 8-11: Specifications for individual materials - Fe-based amorphous strip delivered in the semi- 2018 CENELEC 0 8-11 processed state 895 EN IEC 61265 Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound 2018 CENELEC 0 pressure levels in noise certification of aircraft 896 EN IEC 61755- Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 6-2: Connection of 50 2018 CENELEC 0 m core diameter multimode physically contacting fibres - Nonangled for reference connector application, at wavelength_خ 6-2 of 850 nm using 897 EN IEC 62148- Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance 2018 CENELEC 0 1 898 EN IEC 62884- Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3: Frequency aging test methods 2018 CENELEC 0 3 899 EN IEC 62343- Dynamic modules - Part 3-4: Performance specification templates - Multicast optical switches 2018 CENELEC 0 3-4 900 EN IEC 62561- Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) 2018 CENELEC 0 6 901 EN IEC 61800- Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods 2018 CENELEC 0 3 902 EN IEC 62853 Open systems dependability 2018 CENELEC 0 903 EN IEC 62793 Protection against lightning - Thunderstorm warning systems 2018 CENELEC 0 904 EN IEC/IEEE Bushings for DC application 2018 CENELEC 0 65700 905 CLC/TS 50134- Alarm systems - Social alarm systems - Part 9: IP Communications Protocol 2018 CENELEC 0 9 906 EN IEC 62046 Safety of machinery - Application of protective equipment to detect the presence of persons 2018 CENELEC 0 907 EN IEC 60034- Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from 2018 CENELEC 0 4-1 tests 908 EN IEC 60810 Lamps, light sources and led packages for road vehicles - Performance requirements 2018 CENELEC 0 909 EN 50588-4 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 4: Transformers with 2018 CENELEC 0 cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 2 for use on transformers meeting the requirements of EN 50588-2 910 EN IEC 62325- Framework for energy market communications - Part 301: Common information model (CIM) extensions for markets 2018 CENELEC 0 301 911 EN IEC 62386- Digital addressable lighting interface - Part 221: Particular requirements for control gear - Demand Response (device type 2018 CENELEC 0 221 20) 912 EN 60846â__2 Radiation protection instrumentation Ambient and/ or directional dose equivalent (rate) meters and/or monitors for beta, X 2018 CENELEC 0 and gamma radiation Part 2: High range beta and photon dose and dose rate portable instruments for emergency radiation protection pu 913 EN 60794-1-22 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods 2018 CENELEC 0 914 EN 62841-2-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular 2018 CENELEC 0 requirements for hand-held drills and impact drills 915 EN IEC 61249- Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - 2018 CENELEC 0 2-47 Nonhalogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity (2.0W/m K) and defined flammabilit 916 EN IEC 62667 Medical electrical equipment - Medical light ion beam equipment - Performance characteristics 2018 CENELEC 0 917 EN IEC 62822- Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 2018 CENELEC 0 1 GHz) - Part 1: Product family standard 918 EN IEC 60068- Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation 2018 CENELEC 0 2-5 testing and weathering 919 EN IEC 60079- Explosive atmospheres - Part 0: Equipment - General requirements 2018 CENELEC 0 0 920 CLC/TR 50682 Consideration on the use of OTDRs to measure return loss of single-mode optical fibre connections 2018 CENELEC 0 921 EN IEC 62442- Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent 2018 CENELEC 0 2 lamps) - Method of measurement to determine the efficiency of controlgear 922 CLC/TS 50083- Cable networks for television signals, sound Signals and interactive services - Part 2-3: LTE (4G) Interference Mitigation 2018 CENELEC 0 2-3 Filters 923 EN IEC 60370 Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown 2018 CENELEC 0 methods 924 EN IEC 60332- Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically- 2018 CENELEC 0 3-10 mounted bunched wires or cables - Apparatus 925 EN IEC 60051- Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for 2018 CENELEC 0 5 phase meters, power factor meters and synchroscopes 926 EN IEC 62631- Dielectric and resistive properties of solid insulating materials - Part 3-11: Determination of resistive properties (DC 2018 CENELEC 0 3-11 methods) - Volume resistance and volume resistivity - Method for impregnation and coating materials 927 EN IEC 62933- Electrical Energy Storage (EES) systems - Part 1: Vocabulary 2018 CENELEC 0 1 928 EN IEC 60384- Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors 2018 CENELEC 0 26 with conductive polymer solid electrolyte 929 EN IEC 62680- Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector 2018 CENELEC 0 1-3 Specification 930 EN 50588-3 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 3: Transformers with 2018 CENELEC 0 cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on transformers meeting the requirements of EN 50588-2 931 EN IEC 61162- Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and 2018 CENELEC 0 450 multiple listeners - Ethernet interconnection 932 EN 50173-1 Information technology - Generic cabling systems - Part 1: General requireme 2018 CENELEC 0 933 EN IEC 62040- Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements 2018 CENELEC 0 2 934 EN IEC 62561- Lightning protection system components (LPSC) - Part 7: Requirements for earthing enhancing compounds 2018 CENELEC 0 7 935 EN 50377-14-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2018 CENELEC 0 Part 14-1: Simplex and duplex cords made from simplex plugs with cylindrical ferrules, using EN 60793 2 50 single-mode B1 or B6 fibre f 936 EN IEC 61804- Function blocks (FB) for process control and electronic device description language (EDDL) - Part 2: Specification of FB 2018 CENELEC 0 2 concept 937 EN 50496 Determination of workers exposure to electromagnetic fields and assessment of risk at a broadcast site 2018 CENELEC 0 938 EN IEC 61730- Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing 2018 CENELEC 0 2 939 EN IEC 62024- High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip 2018 CENELEC 0 1 inductor 940 EN IEC 61754- Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-2: Type MPO 2018 CENELEC 0 7-2 connector family - Two fibre rows 941 CLC/TR 50442 Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields 2018 CENELEC 0 942 EN IEC 62631- Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - 2018 CENELEC 0 2-1 Technical frequencies (0,1 Hz to 10 MHz) - AC Methods 943 EN IEC 61076- Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail 2018 CENELEC 0 2-111 specification for power connectors with M12 screw-locking 944 EN IEC 62386- Digital addressable lighting interface - Part 222: Particular requirements for control gear - Thermal lamp protection (device 2018 CENELEC 0 222 type 21) 945 EN IEC 61340- Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate 2018 CENELEC 0 4-4 bulk containers (FIBC) 946 CLC/TR 50600- Information technology - Data centre facilities and infrastructures - Part 99-2: Recommended practices for environmental 2018 CENELEC 0 99-2 sustainability 947 CLC/TS 50654- HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2018 CENELEC 0 1 1: Guidelines 948 EN IEC 62969- Semiconductor devices - Semiconductor interface for automotive vehicles - Part 4: Evaluation method of data interface for 2018 CENELEC 0 4 automotive vehicle sensors 949 EN IEC 62477- Safety requirements for power electronic converter systems and equipment - Part 2: Power electronic converters from 1 000 2018 CENELEC 0 2 V AC or 1 500 V DC up to 36 kV AC or 54 kV DC 950 EN 60669-1 Switches for household and similar fixed electrical installations - Part 1: General requirements 2018 CENELEC 0 951 EN IEC 60404- Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of 2018 CENELEC 0 16 a single sheet tester 952 EN IEC 62820- Building intercom systems - Part 3-1: Application guidelines - General 2018 CENELEC 0 3-1 953 EN 50173-5 Information technology - Generic cabling systems - Part 5: Data centre spaces 2018 CENELEC 0 954 EN IEC 62680- Universal Serial Bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery Specification 2018 CENELEC 0 1-2 955 EN IEC 60268- Sound system equipment - Part 3: Amplifiers 2018 CENELEC 0 3 956 EN IEC 61249- Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - 2018 CENELEC 0 2-45 Nonhalogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity (1.0W/m K) and defined flammabilit 957 EN IEC 60051- Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for 2018 CENELEC 0 6 ohmmeters (impedance meters) and conductance meters 958 CLC/TR 50542- Railway applications - Drivers cab train display controller (TDC) - Part 1: General architecture 2018 CENELEC 0 1 959 EN IEC 62676- Video surveillance systems for use in security applications - Part 5: Data specifications and image quality performance for 2018 CENELEC 0 5 camera devices 960 EN IEC 60051- Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for 2018 CENELEC 0 8 accessories 961 EN IEC 62271- High-voltage switchgear and controlgear - Part 110: Inductive load switching 2018 CENELEC 0 110 962 EN IEC 61643- Components for low-voltage surge protection - Part 352: Selection and application principles for telecommunications and 2018 CENELEC 0 352 signalling network surge isolation transformers (SITs) 963 EN IEC 63093- Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores 2018 CENELEC 0 7 964 EN IEC 61162- Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and 2018 CENELEC 0 460 multiple listeners - Ethernet interconnection - Safety and security 965 EN IEC 62613- Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General 2018 CENELEC 0 1 requirements 966 EN IEC 61340- Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic 2018 CENELEC 0 4-5 protection of footwear and flooring in combination with a person 967 EN IEC 61730- Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction 2018 CENELEC 0 1 968 EN IEC 60071- Insulation co-ordination - Part 2: Application guidelines 2018 CENELEC 0 2 969 EN IEC 60601- Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high 2018 CENELEC 0 2-2 frequency surgical equipment and high frequency surgical accessories 970 EN IEC 60034- Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation 2018 CENELEC 0 27-4 of rotating electrical machines 971 EN 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements 2018 CENELEC 0 972 EN IEC 60317- Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imide 2018 CENELEC 0 73 enamelled rectangular aluminium wire, class 200 973 EN IEC 80601- Medical electrical equipment - Part 2-71: Particular requirements for the basic safety and essential performance of 2018 CENELEC 0 2-71 functional near-infrared spectroscopy (NIRS) equipment 974 EN IEC 61869- Instrument transformers - Part 10: Additional requirements for low-power passive current transformers 2018 CENELEC 0 10 975 EN IEC 62731 Text-to-speech for television - General requirements 2018 CENELEC 0 976 CLC/TR 50600- Information technology - Data centre facilities and infrastructures - Part 99-3: Guidance to the application of EN 50600 2018 CENELEC 0 99-3 series 977 EN IEC 60695- Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods 2018 CENELEC 0 6-2 978 EN IEC 60793- Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter 2018 CENELEC 0 1-45 979 EN IEC 60728- Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable 2018 CENELEC 0 3 networks (TA 5) 980 CLC/TS 50654- HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2018 CENELEC 0 2 2: Parameter Lists 981 EN 50059 Electrostatic hand-held spraying equipment - Safety requirements - Hand-held spraying equipment for non-ignitable 2018 CENELEC 0 coating materials 982 EN 50491-12-1 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems 2018 CENELEC 0 (BACS) - Smart grid - Application specification - Interface and framework for customer - Part 12-1: Interface between the CEM and Home/Buildin 983 EN IEC 60721- Classification of environmental conditions - Part 3-2: Classification of groups of environmental parameters and their 2018 CENELEC 0 3-2 severities - Transportation and Handling 984 EN IEC 61010- Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular 2018 CENELEC 0 2-201 requirements for control equipment 985 EN IEC 60812 Failure modes and effects analysis (FMEA and FMECA) 2018 CENELEC 0 986 EN IEC 61347- Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent 2018 CENELEC 0 2-14 induction lamps 987 EN IEC 62828- Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific 2018 CENELEC 0 3 procedures for temperature transmitters 988 EN IEC 62386- Digital addressable lighting interface - Part 333: Particular requirements for control devices - Manual configuration (feature 2018 CENELEC 0 333 type 33) 989 EN IEC 62714- Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - 2018 CENELEC 0 1 Part 1: Architecture and general requirements 990 EN IEC 62820- Building intercom systems - Part 3-2: Application guidelines - Advanced security building intercom systems (ASBIS) 2018 CENELEC 0 3-2 991 EN 50173-6 Information technology - Generic cabling systems - Part 6: Distributed building services 2018 CENELEC 0 992 EN IEC 62561- Lightning protection system components (LPSC) - PART 2: Requirements for conductors and earth electrodes 2018 CENELEC 0 2 993 EN IEC 60051- Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Special requirements for 2018 CENELEC 0 7 multi-function instruments 994 EN IEC 62822- Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 2018 CENELEC 0 3 Hz) - Part 3: Resistance welding equipment 995 EN IEC 60332- Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically- 2018 CENELEC 0 3-22 mounted bunched wires or cables - Category A 996 EN IEC 60286- Packaging of components for automatic handling - Part 5: Matrix trays 2018 CENELEC 0 5 997 EN IEC 61125 Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating 2018 CENELEC 0 liquids in the delivered state 998 EN 50398-1 Alarm systems - Combined and integrated alarm systems - Part 1: General requirements 2017 CENELEC 0 999 EN 61215-1-2 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing 2017 CENELEC 0 of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules 1000 EN 61970-301 Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base 2017 CENELEC 0 1001 EN 62561-3 Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG) 2017 CENELEC 0 1002 EN 60137 Insulated bushings for alternating voltages above 1 000 V 2017 CENELEC 0 1003 EN 60286-1 Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous 2017 CENELEC 0 tapes 1004 EN 60068-2-69 Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by 2017 CENELEC 0 the wetting balance (force measurement) method 1005 EN 50632-3-3 Electric motor-operated tools - Dust measurement procedure - Part 3-3: Particular requirements for transportable planers 2017 CENELEC 0 and thicknessers 1006 CLC/TS 61400- Wind turbines - Part 14: Declaration of apparent sound power level and tonality values 2017 CENELEC 0 14 1007 EN 62943 Visible light beacon system for multimedia applications 2017 CENELEC 0 1008 EN 50401 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field 2017 CENELEC 0 exposure limits (110 MHz - 100 GHz), when put into service 1009 EN 60300-3-3 Dependability management - Part 3-3: Application guide - Life cycle costing 2017 CENELEC 0 1010 EN 60904-1-1 Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices 2017 CENELEC 0 1011 EN 61202-1 Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification 2017 CENELEC 0 1012 EN 61360-1 Standard data element types with associated classification scheme - Part 1: Definitions - Principles and methods 2017 CENELEC 0 1013 EN 50663 Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions 2017 CENELEC 0 for electromagnetic fields (10 MHz - 300 GHz) 1014 EN 60317-72 Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound fused, silicone resin or varnish 2017 CENELEC 0 impregnated, bare or enamelled round copper wire, temperature index 200 1015 EN 62351-9 Power systems management and associated information exchange - Data and communications security - Part 9: Cyber 2017 CENELEC 0 security key management for power system equipment 1016 EN 62211 Inductive components Reliability management 2017 CENELEC 0 1017 EN 61184 Bayonet lampholders 2017 CENELEC 0 1018 EN 55014-1 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: 2017 CENELEC 0 Emission 1019 EN 60904-8-1 Photovoltaic devices - Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices 2017 CENELEC 0 1020 EN 50289-1-9 Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation 2017 CENELEC 0 (transverse conversion loss TCL transverse conversion transfer loss TCTL) 1021 EN 61340-4-7 Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization 2017 CENELEC 0 1022 EN 61757-1-1 Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings 2017 CENELEC 0 1023 EN 62683-1 Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data 2017 CENELEC 0 1024 EN 50463-3 Railway applications - Energy measurement on board trains - Part 3: Data handling 2017 CENELEC 0 1025 EN 60838-1 Miscellaneous lampholders - Part 1: General requirements and tests - Incorporates Amendment A1: 2017 2017 CENELEC 0 1026 EN 50625-2-4 Collection, logistics & treatment requirements for WEEE - Part 2- 4: Treatment requirements for photovoltaic panels 2017 CENELEC 0 1027 EN 62561-5 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth 2017 CENELEC 0 electrode seals 1028 EN 62325-451- Framework for energy market communications - Part 451-4: Settlement and reconciliation business process, contextual and 2017 CENELEC 0 4 assembly models for European market 1029 EN 61400-12-1 Wind power generation systems - Part 12-1: Power performance measurement of electricity producing wind turbines 2017 CENELEC 0 1030 EN 60205 Calculation of the effective parameters of magnetic piece parts 2017 CENELEC 0 1031 EN 61987-11 Industrial-process measurement and control - Data structures and elements in -process equipment catalogues - Part 11: Lists 2017 CENELEC 0 of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures 1032 EN 62435-1 Electronic components - Long-term storage of electronic semiconductor devices - Part 1: General 2017 CENELEC 0 1033 EN 63005-1 Event video data recorder for road vehicle accidents - Part 1: Basic requirements 2017 CENELEC 0 1034 EN 60051-1 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general 2017 CENELEC 0 requirements common to all parts 1035 EN 55025 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement 2017 CENELEC 0 for the protection of on-board receivers 1036 EN 62827-2 Wireless power transfer - Management - Part 2: Multiple device control management 2017 CENELEC 0 1037 EN 50124-2 Railway applications - Insulation coordination - Part 2: Overvoltages and related protection 2017 CENELEC 0 1038 EN 61010-2- Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular 2017 CENELEC 0 020 requirements for laboratory centrifuges 1039 EN 60034-18- Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating 2017 CENELEC 0 42 electrical machines fed from voltage converters - Qualification tests 1040 EN 50341-2-6 Overhead electrical lines exceeding AC 1 kV - Part 2-6: National Normative Aspects (NNA) for SPAIN 2017 CENELEC 0 1041 EN 62949 Particular safety requirements for equipment to be connected to information and communication networks 2017 CENELEC 0 1042 EN 60154-4 Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides 2017 CENELEC 0 1043 EN 62657-2 Industrial communication networks - Wireless communication networks - Part 2: Coexistence management 2017 CENELEC 0 1044 EN 60947-2 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers 2017 CENELEC 0 1045 EN 62090 Product package labels for electronic components using bar code and two- dimensional symbologies 2017 CENELEC 0 1046 EN 60317-71 Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound fused and resin or varnish 2017 CENELEC 0 impregnated, bare or enamelled round copper wire, temperature index 180 1047 EN 50134-2 Alarm systems - Social alarm systems - Part 2: Trigger devices 2017 CENELEC 0 1048 EN 60794-2 Optical fibre cables - Part 2: Indoor cables - Sectional specification 2017 CENELEC 0 1049 EN 62133-2 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Safety requirements for portable sealed 2017 CENELEC 0 secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems 1050 EN 60079-30-1 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements 2017 CENELEC 0 1051 EN 61010-2- Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular 2017 CENELEC 0 101 requirements for in vitro diagnostic (IVD) medical equipment 1052 EN 61987-15 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 15: Lists 2017 CENELEC 0 of properties (LOPs) for level measuring equipment for electronic data exchange 1053 EN 50289-1-1 Communication cables - Specifications for test methods - Part 1- 1: Electrical test methods - General requirements 2017 CENELEC 0 1054 EN 50341-2-8 Overhead electrical lines exceeding AC 1 kV - Part 2-8: National Normative Aspects (NNA) for France (based on EN 2017 CENELEC 0 50341- 1:2012) 1055 EN 61851-21-1 Electric vehicle conductive charging system - Part 21-1: Electric vehicle on-board charger EMC requirements for 2017 CENELEC 0 conductive connection to an AC/DC supply 1056 EN 63035 MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged edition, 2015) 2017 CENELEC 0 1057 EN 62282-6- Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods 2017 CENELEC 0 200 1058 EN 50566 Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure 2017 CENELEC 0 limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body moun 1059 EN 60034-12 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors 2017 CENELEC 0 1060 EN 60855-1 Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section 2017 CENELEC 0 1061 EN 50402 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - 2017 CENELEC 0 Requirements on the functional safety of gas detection systems 1062 EN 62325-451- Framework for energy market communications - Part 451-1: Acknowledgement business process and contextual model for 2017 CENELEC 0 1 CIM European market 1063 EN 50180-3/A1 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for 2017 CENELEC 0 bushing fixations 1064 CLC/TS 50131- Alarm systems - Intrusion and hold-up systems - Part 2-11: Intrusion detectors - ALDDR 2017 CENELEC 0 2-11 1065 EN 60695-11-2 Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement 2017 CENELEC 0 and guidance 1066 EN 62282-3- Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power 2017 CENELEC 0 201 systems 1067 EN 50463-1 Railway applications - Energy measurement on board trains - Part 1: General 2017 CENELEC 0 1068 EN 61587-1 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental 2017 CENELEC 0 requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation 1069 EN 60317-56 Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane 2017 CENELEC 0 enamelled round copper wire, class 180 1070 EN 61511-2 Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of 2017 CENELEC 0 IEC 61511-1 1071 EN 60794-2-22 Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be 2017 CENELEC 0 terminated with connectors 1072 EN 61400-25-1 Wind energy generation systems - Part 25-1: Communications for monitoring and control of wind power plants - Overall 2017 CENELEC 0 description of principles and models 1073 EN 60793-2-10 Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres 2017 CENELEC 0 1074 EN 62351-7 Power systems management and associated information exchange - Data and communications security - Part 7: Network 2017 CENELEC 0 and System Management (NSM) data object models 1075 EN 62321-7-2 Determination of certain substances in electrotechnical products - Part 7-2: Hexavalent chromium - Determination of 2017 CENELEC 0 hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method 1076 EN 61010-2- Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular 2017 CENELEC 0 011 requirements for refrigerating equipment 1077 EN 60695-8-2 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods 2017 CENELEC 0 1078 EN 50664 Generic standard to demonstrate the compliance of equipment used by workers with limits on exposure to electromagnetic 2017 CENELEC 0 fields (0 Hz - 300 GHz), when put into service or in situ 1079 EN 62386-301 Digital addressable lighting interface - Part 301: Particular requirements - Input devices - Push buttons 2017 CENELEC 0 1080 EN 62827-3 Wireless power transfer - Management - Part 3: Multiple source control management 2017 CENELEC 0 1081 EN 60728-101 Cable networks for television signals, sound signals and interactive services - Part 101: System performance of forward 2017 CENELEC 0 paths loaded with digital channels only 1082 EN 50124-1 Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all 2017 CENELEC 0 electrical and electronic equipment 1083 EN 61215-1-4 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing 2017 CENELEC 0 of thin-film Cu(In,GA)(S,Se)2 based photovoltaic (PV) modules 1084 EN 62561-1 Lightning Protection System Components (LPSC) - Part 1: Requirements for connection components 2017 CENELEC 0 1085 EN 61215-2 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 2: Test procedures 2017 CENELEC 0 1086 EN 62056-7-3 Electricity metering data exchange - The DLMS/COSEM suite - Part 7-3: Wired and wireless M-Bus communication 2017 CENELEC 0 profiles for local and neighbourhood networks 1087 EN 61057 Live working - Insulating aerial devices for mounting on a chassis 2017 CENELEC 0 1088 EN 62550 Spare parts provisioning 2017 CENELEC 0 1089 EN 62766-2-2 Consumer terminal function for access to IPTV and open internet multimedia services - Part 2-2: HTTP adaptive streaming 2017 CENELEC 0 1090 EN 60793-1-48 Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode Dispersion 2017 CENELEC 0 1091 CLC/TS 50136- Alarm systems - Alarm transmission systems and equipment - Part 9: Requirements for common protocol for alarm 2017 CENELEC 0 9 transmission using the Internet Protocol (IP) 1092 EN 61709 Electric components - Reliability - Reference conditions for failure rates and stress models for conversion 2017 CENELEC 0 1093 EN 50360 Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and 2017 CENELEC 0 exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to 1094 EN 61332 Soft ferrite material classification 2017 CENELEC 0 1095 EN 62863 Methods of measuring performances of electric hair clippers or trimmers for household use 2017 CENELEC 0 1096 EN 62343 Dynamic modules - General and guidance 2017 CENELEC 0 1097 EN 62586-2 Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements 2017 CENELEC 0 1098 EN 62433-3 EMC IC modelling - Part 3: Models of Integrated Circuits for EMI behavioural simulation - Radiated emissions modelling 2017 CENELEC 0 (ICEMRE) 1099 EN 50289-1-8 Communication cables - Specifications for test methods - Part 1- 8: Electrical test methods - Attenuation 2017 CENELEC 0 1100 EN 60404-8-6 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials 2017 CENELEC 0 1101 EN 63029 Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Rastergraphics 2017 CENELEC 0 image-based e-books 1102 EN 62884-2 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 2: Phase jitter measurement method 2017 CENELEC 0 1103 EN 62271-212 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) 2017 CENELEC 0 1104 EN 50131-5-3 Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnections equipment using radio frequency 2017 CENELEC 0 techniques 1105 EN 50593 Electric dishwashers for commercial use - Test methods for measuring the performance 2017 CENELEC 0 1106 EN 50341-2- Overhead electrical lines exceeding AC 1 kV - Part 2-13: National Normative Aspects (NNA) for ITALY 2017 CENELEC 0 13/AMD 1107 EN 62133-1 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Safety requirements for portable sealed 2017 CENELEC 0 secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems 1108 EN 60695-11-5 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and 2017 CENELEC 0 guidance 1109 EN 62320-2 Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 2: AIS 2017 CENELEC 0 AtoN Stations - Operational and performance requirements, methods of testing and required test results 1110 EN 63028 Wireless Power Transfer - AirFuel Resonant Baseline System Specification (BSS) 2017 CENELEC 0 1111 EN 61757-2-2 Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing 2017 CENELEC 0 1112 EN 62433-2 EMC IC modelling - Part 2: Models of integrated circuits for EMI behavioural simulation - Conducted emissions modelling 2017 CENELEC 0 (ICEM-CE) 1113 EN 62282-4- Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods 2017 CENELEC 0 102 1114 CLC/TS 50625- Collection, logistics & treatment requirements for WEEE - Part 4: Specification for the collection and logistics 2017 CENELEC 0 4 associated with WEEE 1115 EN 61784-3-8 Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8 2017 CENELEC 0 1116 EN 61511-1 Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, 2017 CENELEC 0 hardware and application programming Requirements 1117 EN 62974-1 Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements 2017 CENELEC 0 1118 EN 60704-2-13 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: 2017 CENELEC 0 Particular requirements for range hoods and other cooking fume extractors 1119 EN 62056-8-5 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5: Narrow-band OFDM G3-PLC communication 2017 CENELEC 0 profile for neighbourhood networks 1120 EN 50126-2 Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety 2017 CENELEC 0 (RAMS) - Part 2: Systems Approach to Safety 1121 EN 60077-2 Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules 2017 CENELEC 0 1122 CLC/TS 50625- Collection, logistics & treatment requirements for WEEE - Part 3- 3: Specification for de-pollution - WEEE 2017 CENELEC 0 3-3 containing CRTs and flat panel displays 1123 EN 50341-2-13 Overhead electrical lines exceeding AC 1 kV - Part 2-13: National Normative Aspects (NNA) for ITALY 2017 CENELEC 0 1124 EN 50665 Generic standard for assessment of electronic and electrical equipment related to human exposure restrictions for 2017 CENELEC 0 electromagnetic fields (0 Hz - 300 GHz) 1125 EN 61587-6 Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 6: Security 2017 CENELEC 0 aspects for indoor cabinets 1126 EN 61400-25-6 Wind energy generation systems - Part 25-6: Communications for monitoring and control of wind power plants - Logical 2017 CENELEC 0 node classes and data classes for condition monitoring 1127 EN 61291-5-2 Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers 2017 CENELEC 0 1128 EN 62056-5-3 Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer 2017 CENELEC 0 1129 EN 62841-3-14 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular 2017 CENELEC 0 requirements for transportable drain cleaners 1130 EN 61010-2- Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular 2017 CENELEC 0 202 requirements for electrically operated valve actuators 1131 EN 62670-3 Photovoltaic concentrators (CPV) - Performance testing - Part 3: Performance measurements and power rating 2017 CENELEC 0 1132 EN 60695-8-1 Fire hazard testing - Part 8-1: Heat release - General guidance 2017 CENELEC 0 1133 EN 62802 Measurement methods of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulators in 2017 CENELEC 0 highfrequency radio on fibre (RoF) Systems 1134 EN 50134-7 Alarm systems - Social alarm systems - Part 7: Application guidelines 2017 CENELEC 0 1135 EN 61280-4-4 Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion 2017 CENELEC 0 measurement for installed links 1136 EN 60950-22 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors 2017 CENELEC 0 1137 EN 50288-12-1 Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification 2017 CENELEC 0 for screened cables characterised from 1 MHz up to 2 000 MHz - Horizontal and building backbone cables 1138 EN 55016-2-3 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of 2017 CENELEC 0 disturbances and immunity - Radiated disturbance measurements 1139 EN 60793-1-61 Optical fibres - Part 1-61: Measurement methods and test procedures - Polarization crosstalk 2017 CENELEC 0 1140 CLC/TS 61400- Wind turbines - Part 26-2: Production-based availability for wind turbines 2017 CENELEC 0 26-2 1141 EN 50672 Ecodesign requirements for computers and computer servers 2017 CENELEC 0 1142 EN 60068-2-18 Environmental testing - Part 2-18: Tests - Test R and guidance: Water 2017 CENELEC 0 1143 EN 60127-5 Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links 2017 CENELEC 0 1144 EN 60749-9 Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking 2017 CENELEC 0 1145 EN 60780-323 Nuclear facilities - Electrical equipment important to safety - Qualification 2017 CENELEC 0 1146 EN 62745 Safety of machinery - Requirements for cableless control systems of machinery 2017 CENELEC 0 1147 EN 60695-1-10 Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines 2017 CENELEC 0 1148 EN 62453-1 Field Device Tool (FDT) interface specification - Part 1: Overview and guidance 2017 CENELEC 0 1149 EN 62714-3 Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - 2017 CENELEC 0 Part 3: Geometry and kinematics 1150 EN 60728-13-1 Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast 2017 CENELEC 0 signal over FTTH system 1151 EN 61511-3 Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of 2017 CENELEC 0 the required safety integrity levels 1152 EN 61577-2 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific 2017 CENELEC 0 requirements for 222Rn and 220Rn measuring instruments 1153 EN 62920 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment 2017 CENELEC 0 1154 CLC/TR 50669 Investigation Results on Electromagnetic Interference in the Frequency Range below 150 kHz 2017 CENELEC 0 1155 EN 61360-6 Standard data element types with associated classification scheme for electric components - Part 6: IEC Common Data 2017 CENELEC 0 Dictionary (IEC CDD) quality guidelines 1156 EN 50155 Railway applications - Rolling stock - Electronic equipment 2017 CENELEC 0 1157 EN 61784-3-2 Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 2017 CENELEC 0 1158 EN 60623 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Vented nickel-cadmium prismatic 2017 CENELEC 0 rechargeable single cells 1159 EN 61800-5-2 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional 2017 CENELEC 0 1160 EN 62287-1 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic 2017 CENELEC 0 identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques 1161 EN 61300-2-9 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - 2017 CENELEC 0 Shock 1162 EN 50385 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field 2017 CENELEC 0 exposure limits (110 MHz - 100 GHz), when placed on the market 1163 EN 62586-1 Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI) 2017 CENELEC 0 1164 EN 61857-31 Electrical insulation systems - Procedures for thermal evaluation - Part 31: Applications with a designed life of 5 000 h or 2017 CENELEC 0 less 1165 EN 60077-1 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules 2017 CENELEC 0 1166 EN 61810-2 Electromechanical elementary relays - Part 2: Reliability 2017 CENELEC 0 1167 EN 62435-5 Electronic components - Long-term storage of electronic semiconductor devices - Part 5: Die and wafer devices 2017 CENELEC 0 1168 EN 60749-28 Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing - 2017 CENELEC 0 Charged device model (CDM) - device level 1169 EN 50647 Basic standard for the evaluation of workers exposure to electric and magnetic fields from equipment and installations for 2017 CENELEC 0 the production, transmission and distribution of electricity 1170 EN 62657-1 Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements 2017 CENELEC 0 and spectrum considerations 1171 EN 50126-1 Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety 2017 CENELEC 0 (RAMS) - Part 1: Generic RAMS Process 1172 EN 62453-309 Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9 2017 CENELEC 0 1173 EN 62351-11 Power systems management and associated information exchange - Data and communications security - Part 11: Security 2017 CENELEC 0 for XML documents 1174 EN 61005 Radiation protection instrumentation - Neutron ambient dose equivalent (rate) meters 2017 CENELEC 0 1175 EN 61169-11 Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer 2017 CENELEC 0 (type 4,1-9,5) _خ conductor 9,5 mm with threaded coupling - Characteristic impedance 50 1176 CLC/TS 50136- Alarm systems - Alarm transmission systems and equipment - Part 7: Application guidelines 2017 CENELEC 0 7 1177 EN 61191-4 Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies 2017 CENELEC 0 1178 EN 50463-5 Railway applications - Energy measurement on board trains - Part 5: Conformity assessment 2017 CENELEC 0 1179 EN 62056-6-1 Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) 2017 CENELEC 0 1180 EN 50380 Marking and documentation requirements for Photovoltaic Modules 2017 CENELEC 0 1181 EN 62820-1-2 Building intercom system - Part 1-2: System requirements - Building intercom systems using the internet protocol (IP) 2017 CENELEC 0 1182 EN 60793-2-70 Optical fibres - Part 2-70: Product specifications - Sectional specification for polarization-maintaining fibres 2017 CENELEC 0 1183 EN 62805-1 Method for measuring photovoltaic (PV) glass - Part 1: Measurement of total haze and spectral distribution of haze 2017 CENELEC 0 1184 EN 60645-1 Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry 2017 CENELEC 0 1185 EN 60715 Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of 2017 CENELEC 0 switchgear, controlgear and accessories 1186 EN 62765-1 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and 2017 CENELEC 0 transmitters - Part 1: Pressure transmitters 1187 EN 50655-3 Electric cables - Accessories - Material characterization - Part 3: Fingerprinting for cold shrinkable components for low and 2017 CENELEC 0 medium voltage applications up to 20,8/36 (42) kV 1188 EN 50090-3-4 Home and Building Electronic Systems (HBES) - Part 3-4: Secure Application Layer, Secure Service, Secure configuration 2017 CENELEC 0 and security Resources 1189 EN 60317-69 Specifications for particular types of winding wires - Part 69: Polyester or polyesterimide overcoated with polyamideimide 2017 CENELEC 0 enamelled rectangular aluminium wire, class 220 1190 EN 50849 Sound systems for emergency purposes 2017 CENELEC 0 1191 EN 50131-2-2 Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors 2017 CENELEC 0 1192 EN 50332-3 Sound system equipment: headphones and earphones associated with personal music players - maximum sound pressure 2017 CENELEC 0 level measurement methodology - Part 3: measurement method for sound dose management 1193 EN 62488-2 Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC 2017 CENELEC 0 1194 EN 61753-121- Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords 2017 CENELEC 0 2 with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment 1195 CLC/TS 50661- Alarm systems - External perimeter security systems - Part 1: System requirements 2017 CENELEC 0 1 1196 EN 62256 Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement 2017 CENELEC 0 1197 EN 60793-1-33 Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility 2017 CENELEC 0 1198 EN 61788-22-1 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors 2017 CENELEC 0 1199 EN 60839-11- Alarm and electronic security systems - Part 11-31: Electronic access control systems - Core interoperability protocol based 2017 CENELEC 0 31 on Web services 1200 EN 60400 Lampholders for tubular fluorescent lamps and starterholders 2017 CENELEC 0 1201 EN 60444-8 Measurement of quartz crystal unit parameters - Part 8 : Test fixture for surface mounted quartz crystal units 2017 CENELEC 0 1202 EN 60749-43 Semiconductor devices - Mechanical and climatic test methods - Part 43: Guidelines for IC reliability qualification plans 2017 CENELEC 0 1203 EN 60679-1 Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1: Generic specification 2017 CENELEC 0 1204 EN 62232 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the 2017 CENELEC 0 purpose of evaluating human exposure 1205 EN 55035 Electromagnetic compatibility of multimedia equipment â__ Immunity requirements (CISPR 35:2016 , modified) 2017 CENELEC 0 1206 EN 60793-1-60 Optical fibres - Part 1-60: Measurement methods and test procedures - Beat length 2017 CENELEC 0 1207 EN 60317-0-7 Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect 2017 CENELEC 0 enamelled round copper wire 1208 EN 62944 Audio, video and multimedia systems and equipment - Digital television accessibility - Functional specifications 2017 CENELEC 0 1209 EN 50588-1 Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements 2017 CENELEC 0 1210 EN 60947-5-1 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical 2017 CENELEC 0 control circuit devices 1211 EN 61987-16 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 16: Lists 2017 CENELEC 0 of properties (LOPs) for density measuring equipment for electronic data exchange 1212 EN 50121-2 Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world 2017 CENELEC 0 1213 EN 60674-2 Specification for plastic films for electrical purposes - Part 2: Methods of test 2017 CENELEC 0 1214 EN 61800-9-1 Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power 2017 CENELEC 0 electronics and their driven applications - General requirements for setting energy efficiency standards for power driven equipment using 1215 EN 63044-1 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General 2017 CENELEC 0 requirements 1216 EN 61810-2-1 Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values 2017 CENELEC 0 1217 EN 50625-2-3 Collection, logistics & treatment requirements for WEEE - Part 2- 3: Treatment requirements for temperature 2017 CENELEC 0 exchange equipment and other WEEE containing VFC and/or VHC 1218 EN 60404-1 Magnetic materials - Part 1: Classification 2017 CENELEC 0 1219 EN 61960-3 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for 2017 CENELEC 0 portable applications - Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them 1220 EN 61191-2 Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies 2017 CENELEC 0 1221 EN 50655-2 Electric cables - Accessories - Material characterization - Part 2: Fingerprinting for heat shrinkable components for low and 2017 CENELEC 0 medium voltage applications up to 20,8/36 (42) kV 1222 EN 62931 GX16t-5 capped tubular led lamp - Safety specifications 2017 CENELEC 0 1223 EN 61000-4-31 Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband 2017 CENELEC 0 conducted disturbance immunity test 1224 EN 62561-4 Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners 2017 CENELEC 0 1225 EN 60749-4 Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress 2017 CENELEC 0 test (HAST) 1226 EN 60317-0-10 Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, 2017 CENELEC 0 unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire 1227 EN 61970-452 Energy management system application program interface (EMS-API) - Part 452: CIM static transmission network model 2017 CENELEC 0 profiles 1228 EN 62453-2 Field Device Tool (FDT) Interface Specification - Part 2: Concepts and detailed Description 2017 CENELEC 0 1229 EN 62040-5-3 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements 2017 CENELEC 0 1230 EN 62766-3 Consumer terminal function for access to IPTV and open internet multimedia services - Part 3: Content metadata 2017 CENELEC 0 1231 EN 61188-7 Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD 2017 CENELEC 0 library construction 1232 EN 50121-3-1 Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle 2017 CENELEC 0 1233 EN 60317-68 Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 2017 CENELEC 0 120 1234 EN 62287-2 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic 2017 CENELEC 0 identification system (AIS) - Part 2: Self-organising time division multiple access (SOTDMA) techniques 1235 EN 62788-1-6 Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for 2017 CENELEC 0 determining the degree of cure in Ethylene-Vinyl Acetate 1236 EN 62228-2 Integrated circuits - EMC evaluation of transceivers - Part 2: LIN transceivers 2017 CENELEC 0 1237 EN 61951-2 Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for 2017 CENELEC 0 portable applications - Part 2: Nickel-metal hydride 1238 EN 60839-11- Alarm and electronic security systems - Part 11-32: Electronic access control systems - Access control monitoring based on 2017 CENELEC 0 32 Web services 1239 EN 63080 Accessibility terms and definitions 2017 CENELEC 0 1240 EN 62680-3-1 Universal Serial Bus interfaces for data and power - Part 3-1: Universal Serial Bus 3.1 Specification 2017 CENELEC 0 1241 EN 62386-302 Digital addressable lighting interface - Part 302: Particular requirements - Input devices - Absolute input devices 2017 CENELEC 0 1242 EN 62656-5 Standardized product ontology register and transfer by spreadsheets - Part 5: Interface for activity description 2017 CENELEC 0 1243 EN 62927 Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical Testing 2017 CENELEC 0 1244 EN 60794-1-2 Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance 2017 CENELEC 0 1245 EN 60793-1-1 Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance 2017 CENELEC 0 1246 EN 60079-30-2 Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and 2017 CENELEC 0 maintenance 1247 EN 50645 Ecodesign requirements for small power transformers 2017 CENELEC 0 1248 EN 62496-2 Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement 2017 CENELEC 0 conditions for optical characteristics of optical circuit boards 1249 EN 50341-2-5 Overhead electrical lines exceeding AC 1 kV - Part 2-5: National Normative Aspects (NNA) for DENMARK 2017 CENELEC 0 1250 EN 60312-1 Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance 2017 CENELEC 0 1251 EN 61169-59 Radio-frequency connectors -Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency 2017 CENELEC 0 connectors 1252 EN 62754 Computation of waveform Parameter uncertainties 2017 CENELEC 0 1253 EN 61987-24-3 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: 2017 CENELEC 0 Lists of properties (LOPs) of flow modification accessories for electronic data exchange 1254 EN 60794-1-3 Optical fibre cables - Part 1-3: Generic specification - optical cable elements 2017 CENELEC 0 1255 EN 60317-70 Specifications for particular types of winding wires - Part 70: Polyester glass-fibre wound fused, unvarnished or resin or 2017 CENELEC 0 varnish impregnated, bare or enamelled round copper wire, temperature index 155 1256 EN 62924 Railway applications - Fixed installations - Stationary energy storage system for DC traction systems 2017 CENELEC 0 1257 EN 62940 Maritime navigation and radiocommunication equipment and systems - Integrated communication system (ICS) - 2017 CENELEC 0 Operational and performance requirements, methods of testing and required test results 1258 EN 61191-3 Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies 2017 CENELEC 0 1259 EN 61326-3-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements 2017 CENELEC 0 for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applic 1260 EN 61076-3- Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, 2017 CENELEC 0 104 shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz 1261 EN 62619 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Safety requirements for secondary lithium 2017 CENELEC 0 cells and batteries, for use in industrial applications 1262 EN 50657 Railways Applications - Rolling stock applications - Software on Board Rolling Stock 2017 CENELEC 0 1263 EN 60749-3 Semiconductor devices - Mechanical and climatic test methods - Part 3: External visual examination 2017 CENELEC 0 1264 EN 62264-3 Enterprise-control system integration - Part 3: Activity models of manufacturing operations management 2017 CENELEC 0 1265 EN 62453-302 Field device tool (FDT) interface specification - Part 302: Communication profile integration - IEC 61784 CPF 2 2017 CENELEC 0 1266 EN 62884-1 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the 2017 CENELEC 0 measurement 1267 EN 60317-67 Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 2017 CENELEC 0 105 1268 EN 60500 Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz 2017 CENELEC 0 1269 EN 61987-24-2 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: 2017 CENELEC 0 List of properties (LOPs) of valve/actuator accessories for electronic data exchange 1270 EN 62841-3-13 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular 2017 CENELEC 0 requirements for transportable drills 1271 EN 61643-351 Components for low-voltage surge protective devices - Part 351: Performance requirements and test methods for 2017 CENELEC 0 telecommunications and signalling network surge isolation transformers (SIT) 1272 EN 62766-2-1 Consumer terminal function for access to IPTV and open internet multimedia services - Part 2-1: Media formats 2017 CENELEC 0 1273 EN 50090-6-1 Home and Building Electronic Systems (HBES) - Part 6-1: Interfaces - Webservice interface 2017 CENELEC 0 1274 EN 62952-3 Power sources for a wireless communication device - Part 3: Generic energy harvesting adaptor module 2017 CENELEC 0 1275 EN 60966-2-6 Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV 2017 CENELEC 0 receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors 1276 EN 61000-4-39 Electromagnetic Compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close 2017 CENELEC 0 proximity - Immunity test 1277 EN 61800-9-2 Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power 2017 CENELEC 0 electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters 1278 EN 61076-3- Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, 2017 CENELEC 0 122 shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments 1279 EN 61189-5- Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: 2017 CENELEC 0 503 General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards 1280 EN 61400-25-5 Wind energy generation systems - Part 25-5: Communications for monitoring and control of wind power plants - 2017 CENELEC 0 Compliance testing 1281 EN 62948 Industrial networks - Wireless communication network and communication profiles - WIA-FA 2017 CENELEC 0 1282 EN 62056-8-6 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-6: High speed PLC ISO/IEC 12139-1 profile for 2017 CENELEC 0 neighbourhood networks 1283 EN 62196-2 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional 2017 CENELEC 0 compatibility and interchangeability requirements for a.c. pin and contact-tube accessories 1284 EN 61215-1-3 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing 2017 CENELEC 0 of thin-film amorphous silicon based photovoltaic (PV) modules 1285 EN 62805-2 Method for measuring photovoltaic (PV) glass - Part 2: Measurement of transmittance and reflectance 2017 CENELEC 0 1286 EN 63002 Identification and communication interoperability method for external power supplies used with portable computing 2017 CENELEC 0 devices 1287 EN 62841-2-17 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular 2017 CENELEC 0 requirements for hand-held routers 1288 EN 62739-3 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 3: Selection guidance of 2017 CENELEC 0 erosion test methods 1289 EN 62439-2 Industrial communication networks - High availability automation networks - Part 2: Media Redundancy Protocol (MRP) 2017 CENELEC 0 1290 EN 62717 LED modules for general lighting - Performance requirements 2017 CENELEC 0 1291 EN 61000-4-12 Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test 2017 CENELEC 0 1292 EN 60664-3 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for 2017 CENELEC 0 protection against pollution 1293 EN 82304-1 Health Software - Part 1: General requirements for product safety 2017 CENELEC 0 1294 EN 62321-8 Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography- 2017 CENELEC 0 mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS) 1295 EN 50131-6 Alarm systems - Intrusion and hold-up systems - Part 6: Power supplies 2017 CENELEC 0 1296 EN 61724-1 Photovoltaic system performance - Part 1: Monitoring 2017 CENELEC 0 1297 EN 61755-3-10 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector 2017 CENELEC 0 parameters of non-dispersion shifted single mode physically contacting fibres - Non-angled, ferrule-less, bore alignment connectors 1298 EN 60153-4 Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides 2017 CENELEC 0 1299 EN 62841-2-10 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular 2017 CENELEC 0 requirements for hand-held mixers 1300 EN 60728-11 Cable networks for television signals, sound signals and interactive services - Part 11: Safety 2017 CENELEC 0 1301 EN 60749-6 Semiconductor devices - Mechanical and climatic test methods - Part 6: Storage at high temperature 2017 CENELEC 0 1302 EN 61000-4-10 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic 2017 CENELEC 0 field immunity test 1303 EN 61076-2- Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for 2017 CENELEC 0 113 connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz 1304 EN 61240 Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and 2017 CENELEC 0 selection - General rules 1305 EN 60384-15 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid 2017 CENELEC 0 or solid electrolyte 1306 EN 62386-304 Digital addressable lighting interface - Part 304: Particular requirements - Input devices - Light sensor 2017 CENELEC 0 1307 EN 50152-3-1 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and 2017 CENELEC 0 protection devices for specific use in a.c. traction systems - Devices 1308 EN 62979 Photovoltaic module - Bypass diode - Thermal runaway test 2017 CENELEC 0 1309 CLC/TS 50625- Collection, logistics & Treatment requirements for WEEE - Part 3-5: Technical specification for de-pollution - 2017 CENELEC 0 3-5 Photovoltaic panels 1310 EN 50620 Electric cables - Charging cables for electric vehicles (BT(DE/NOT)259) 2017 CENELEC 0 1311 CLC/TR 50659 Electromagnetic characteristics of linear cable management systems (CMS) 2017 CENELEC 0 1312 EN 60445 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, 2017 CENELEC 0 conductor terminations and conductors 1313 EN 62435-2 Electronic components - Long-term storage of electronic semiconductor devices - Part 2: Deterioration mechanisms 2017 CENELEC 0 1314 EN 60749-5 Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test 2017 CENELEC 0 1315 EN 61605 Fixed inductors for use in electronic and telecommunication equipment - Marking codes 2017 CENELEC 0 1316 EN 50463-4 Railway applications - Energy measurement on board trains - Part 4: Communication 2017 CENELEC 0 1317 EN 60966-2-5 Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV 2017 CENELEC 0 receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors 1318 EN 60838-2-3 Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps 2017 CENELEC 0 1319 CLC/TS 61400- Wind energy generation systems - Part 26-3: Availability for wind power stations 2017 CENELEC 0 26-3 1320 EN 62386-303 Digital addressable lighting interface - Part 303: Particular requirements - Input devices - Occupancy sensor 2017 CENELEC 0 1321 EN 62569-1 Generic specification of information on products by properties - Part 1: Principles and method 2017 CENELEC 0 1322 EN 62150-5 Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of 2017 CENELEC 0 tuneable transmitters 1323 EN 62922 Organic light emitting diode (OLED) panels for general lighting - Performance Requirements 2017 CENELEC 0 1324 EN 60079-13 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v" 2017 CENELEC 0 1325 EN 50631-1 Household appliances network and grid connectivity - Part 1: General Requirements, Generic Data Modelling and Neutral 2017 CENELEC 0 Messages 1326 EN 50121-5 Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations 2017 CENELEC 0 and apparatus 1327 CLC/TS 50625- Collection, logistics & treatment requirements for WEEE - Part 3- 4: Specification for de-pollution - temperature 2017 CENELEC 0 3-4 exchange equipment 1328 EN 60695-1-30 Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing 2017 CENELEC 0 process - General guidelines 1329 EN 62925 Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability 2017 CENELEC 0 1330 EN 62281 Safety of primary and secondary lithium cells and batteries during transport 2017 CENELEC 0 1331 EN 61745 End-face image analysis procedure for the calibration of optical fibre geometry test sets 2017 CENELEC 0 1332 EN 50637 Medical electrical equipment - Particular requirements for the basic safety and essential performance of medical beds for 2017 CENELEC 0 children 1333 EN 50341-2-9 Overhead electrical lines exceeding AC 1 kV - Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern 2017 CENELEC 0 Ireland - Incorporates Amendment A1: 2018 1334 EN 50463-2 Railway applications - Energy measurement on board trains - Part 2: Energy measuring 2017 CENELEC 0 1335 EN 50655-1 Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds 2017 CENELEC 0 1336 EN 61784-3-13 Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 2017 CENELEC 0 13 1337 EN 50121-1 Railway applications - Electromagnetic compatibility - Part 1: General 2017 CENELEC 0 1338 EN 62689-2 Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 2: System aspects 2017 CENELEC 0 1339 EN 61300-2-55 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-55: Tests - 2017 CENELEC 0 Strength of mounted adaptor 1340 CLC/TS 61400- Wind turbines - Part 26-1: Time-based availability for wind turbine generating systems 2017 CENELEC 0 26-1 1341 EN 62271-1 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and 2017 CENELEC 0 controlgear 1342 EN 61784-3-3 Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3 2017 CENELEC 0 1343 EN 61951-1 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Secondary sealed cells and batteries for 2017 CENELEC 0 portable applications - Part 1: Nickel-cadmium 1344 EN 61058-1-2 Switches for appliances - Part 1-2: Requirements for electronic switches 2016 CENELEC 0 1345 EN 50341-2-4 Overhead electrical lines exceeding AC 1 kV - Part 2-4: National Normative Aspects (NNA) for Germany 2016 CENELEC 0 1346 EN 62446-1 Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 1: Grid connected systems - 2016 CENELEC 0 Documentation, commissioning tests and inspection 1347 EN 60966-2-7 Radio frequency and coaxial cable assemblies - Part 2-7: Detail specification for cable assemblies for radio and TV 2016 CENELEC 0 receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors 1348 EN 62317-11 Ferrite cores - Dimensions - Part 11: EC-cores for use in power supply applications 2016 CENELEC 0 1349 EN 62788-1-5 Measurement procedures for materials used in photovoltaic modules - Part 1-5: Encapsulants - Measurement of change in 2016 CENELEC 0 linear dimensions of sheet encapsulation material resulting from applied thermal conditions 1350 EN 62580-1 Electronic railway equipment - On-board multimedia and telematic subsystems for railways - Part 1: General architecture 2016 CENELEC 0 1351 EN 61340-5-1 Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements 2016 CENELEC 0 1352 EN 60603-7-81 Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for 2016 CENELEC 0 data transmissions with frequencies up to 2 000 MHz 1353 EN 61882 Hazard and operability studies (HAZOP studies) - Application guide 2016 CENELEC 0 1354 EN 61987-22 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists 2016 CENELEC 0 of Properties (LOPs) of valve body assemblies for electronic data exchange 1355 EN 60794-3-21 Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunication 2016 CENELEC 0 cables for use in premises cabling 1356 EN 50131-2-8 Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors 2016 CENELEC 0 1357 EN 50290-2-33 Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi 2016 CENELEC 0 element metallic cables for indoor installation (data cable) 1358 EN 50632-2-4 Electric motor-operated electric tools - Dust measurement procedure - Part 2-4: Particular requirements for sanders other 2016 CENELEC 0 than disk type 1359 EN 50592 Railway applications - Testing of rolling stock for electromagnetic compatibility with axle counters 2016 CENELEC 0 1360 EN 50341-2-22 Overhead electrical lines exceeding AC 1 kV - Part 2-22: National Normative Aspects (NNA) for Poland 2016 CENELEC 0 1361 EN 62911 Audio, video and information technology equipment - Routine electrical safety testing in production 2016 CENELEC 0 1362 EN 60749-44 Semiconductor devices - Mechanical and climatic test methods - Part 44: Neutron beam irradiated single event effect (SEE) 2016 CENELEC 0 test method for semiconductor devices 1363 EN 61377 Railway applications - Rolling stock - Combined test method for traction Systems 2016 CENELEC 0 1364 EN 61003-1 Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods 2016 CENELEC 0 for evaluating performance 1365 EN 61800-7- Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems 2016 CENELEC 0 204 - Profile type 4 specification 1366 EN 60310 Railway applications - Traction transformers and inductors on board rolling Stock 2016 CENELEC 0 1367 EN 62877-1 Electrolyte and water for vented lead acid accumulators - Part 1: Requirements for electrolyte 2016 CENELEC 0 1368 EN 50290-2-36 Communication cables - Part 2-36: Common design rules and construction - Crosslinked Silicone rubber insulation 2016 CENELEC 0 compound 1369 EN 50341-2-16 Overhead electrical lines exceeding AC 1 kV - Part 2-16: National Normative Aspects (NNA) for NORWAY 2016 CENELEC 0 1370 EN 61249-2-44 Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - 2016 CENELEC 0 Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-c 1371 EN 62788-1-2 Measurement procedures for materials used in photovoltaic modules - Part 1-2: Encapsulants - Measurement of volume 2016 CENELEC 0 resistivity of photovoltaic encapsulants and other polymeric materials 1372 EN 62264-5 Enterprise-control system integration - Part 5: Business to manufacturing transactions 2016 CENELEC 0 1373 EN 61000-4-16 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, 2016 CENELEC 0 common mode disturbances in the frequency range 0 Hz to 150 kHz 1374 EN 60424-3 Ferrite cores - Guidelines on the limits of surface irregularities - Part 3: ETD-cores, EER-cores, EC-cores and E-cores 2016 CENELEC 0 1375 EN 61753-052- Fibre optic interconnecting devices and passive components - Performance standard - Part 052-3: Single-mode fibre 2016 CENELEC 0 3 nonconnectorized fixed attenuator - Category U in uncontrolled environment 1376 EN 62087-5 Audio, video and related equipment - Determination of power consumption - Part 5: Set top boxes (STB) 2016 CENELEC 0 1377 EN 62343-3-1 Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers 2016 CENELEC 0 1378 EN 62779-3 Semiconductor devices - Semiconductor interface for human body communication - Part 3: Functional type and its 2016 CENELEC 0 operational conditions 1379 EN 50526-3 Railway application - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 3: Application Guide 2016 CENELEC 0 1380 EN 60086-2 Primary batteries - Part 2: Physical and electrical specifications 2016 CENELEC 0 1381 EN 50436-3 Alcohol interlocks - Test methods and performance requirements - Part 3: Guidance for authorities, decision makers, 2016 CENELEC 0 purchasers and users 1382 EN 60794-3-70 Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple 2016 CENELEC 0 deployment 1383 EN 62343-1 Dynamic modules - Part 1: Performance standards - General conditions 2016 CENELEC 0 1384 EN 61000-4-9 Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity 2016 CENELEC 0 test 1385 EN 62841-3-4 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular 2016 CENELEC 0 requirements for transportable bench grinders - Incorporates Amendment A11: 2017 1386 EN 60990 Methods of Measurement of Touch Current and Protective Conductor Current 2016 CENELEC 0 1387 EN 62760 Audio reproduction method for normalized loudness level 2016 CENELEC 0 1388 EN 60335-2-15 Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids - 2016 CENELEC 0 Incorporates Amendment A11: 2018 1389 EN 61754-34 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 34: Type URM 2016 CENELEC 0 connector family 1390 EN 61058-1-1 Switches for appliances - Part 1-1: Requirements for mechanical switches 2016 CENELEC 0 1391 EN 45544-4 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic 2016 CENELEC 0 gases and vapours - Part 4: Guide for selection, installation, use and maintenance 1392 EN 61078 Reliability block diagrams 2016 CENELEC 0 1393 EN 60153-2 Hollow metallic waveguides - Part 2: Relevant specifications for ordinary rectangular waveguides 2016 CENELEC 0 1394 EN 60317-59 Specifications for particular type of winding wires - Part 59: Polyamideimide enameled round copper wire, class 240 2016 CENELEC 0 1395 EN 60974-4 Arc welding equipment - Part 4: Periodic inspection and testing 2016 CENELEC 0 1396 EN 61169-53 Radio-frequency connectors - Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer 2016 CENELEC 0 conductor 16 mm with screw lock - Characteristic impedance 50 O (Type S7- 16) 1397 EN 60730-2-6 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including 2016 CENELEC 0 mechanical requirements 1398 EN 62424 Representation of process control engineering - Requests in P&I diagrams and data exchange between P&ID 2016 CENELEC 0 tools and PCE-CAE tools 1399 EN 60794-5 Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing 2016 CENELEC 0 1400 CLC/TS 50576 Electric cables - Extended application of test results for reaction to fire 2016 CENELEC 0 1401 EN 62572-3 Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication 2016 CENELEC 0 1402 EN 62108 Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval 2016 CENELEC 0 1403 EN 60539-1 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification 2016 CENELEC 0 1404 EN 62129-1 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers 2016 CENELEC 0 1405 EN 50632-2-11 Electric motor-operated tools - Dust measurement procedure - Part 2-11: Particular requirements for jig and sabre saws 2016 CENELEC 0 1406 EN 61249-2-43 Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - 2016 CENELEC 0 Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), co 1407 EN 50628 Erection of electrical installations in underground mines 2016 CENELEC 0 1408 EN 50052 High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures 2016 CENELEC 0 1409 EN 60695-1-20 Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General 2016 CENELEC 0 guidance 1410 EN 61987-14 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 14: Lists 2016 CENELEC 0 of properties (LOP) for temperature measuring equipment for electronic data exchange 1411 EN 60691 Thermal-links - Requirements and application guide 2016 CENELEC 0 1412 CLC/TS 50131- Alarm systems - Intrusion and hold-up systems - Part 2-9: Intrusion detectors - Active infrared beam detectors 2016 CENELEC 0 2-9 1413 EN 50290-2-35 Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound 2016 CENELEC 0 1414 EN 60062 Marking codes for resistors and capacitors 2016 CENELEC 0 1415 EN 61753-381- Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide 2016 CENELEC 0 2 grating - Category C (controlled environment) 1416 EN 60603-7-82 Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed 2016 CENELEC 0 connectors, for data transmission with frequencies up to 2 000 MHz 1417 EN 60730-1 Automatic electrical controls - Part 1: General requirements 2016 CENELEC 0 1418 EN 62841-2-8 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular 2016 CENELEC 0 requirements for hand-held shears and nibblers 1419 EN 62820-1-1 Building intercom systems - Part 1-1: System requirements - General 2016 CENELEC 0 1420 EN 62391-1 Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification 2016 CENELEC 0 1421 EN 61300-3-25 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: 2016 CENELEC 0 Examinations and measurements - Concentricity of non-angled ferrules and non-angled ferrules with fibre installed 1422 EN 60086-3 Primary batteries - Part 3: Watch batteries 2016 CENELEC 0 1423 EN 62631-3-1 Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC 2016 CENELEC 0 methods) - Volume resistance and volume resistivity - General method 1424 EN 61788-4 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn 2016 CENELEC 0 composite superconductors 1425 EN 60086-5 Primary batteries - Part 5: Safety of batteries with aqueous electrolyte 2016 CENELEC 0 1426 EN 62621 Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for 2016 CENELEC 0 overhead contact line systems - Incorporates Amendment A1: 2016 1427 EN 62739-2 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 2: Erosion test method for 2016 CENELEC 0 metal materials with surface processing 1428 EN 60079-29-1 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases 2016 CENELEC 0 1429 CLC/TR 50417 Safety of household and similar electrical appliances - Interpretations related to European Standards in the EN 60335 series 2016 CENELEC 0 1430 EN 50436-7 Alcohol interlocks - Test methods and performance requirements - Part 7: Installation document 2016 CENELEC 0 1431 EN 61753-381- Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide 2016 CENELEC 0 6 grating - Category O (uncontrolled environment) 1432 CLC/TR 50542- Railway applications - Drivers cab Train Display Controller (TDC) - Part 2: Display systems FIS 2016 CENELEC 0 2 1433 EN 62317-12 Ferrite cores - Dimensions - Part 12: Ring cores 2016 CENELEC 0 1434 EN 50411-3-8 Fibre organizers and closures to be used in optical fibre communication systems - Product specifications - Part 3-8: Fibre 2016 CENELEC 0 management system, terminal equipment box type 1 for category C 1435 EN 60384-4 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors 2016 CENELEC 0 with solid (MnO2) and non-solid electrolyte 1436 EN 50289-4-16 Communication cables - Specifications for test methods - Part 4- 16: Environmental test methods - Circuit integrity under 2016 CENELEC 0 fire conditions 1437 EN 62689-1 Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and 2016 CENELEC 0 requirements 1438 EN 61196-10 Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) 2016 CENELEC 0 dielectric - Incorporating corrigendum February 2016 1439 CLC/TR 50542- Railway applications - Drivers cab train Display Controller (TDC) - Part 3: Other train systems FIS 2016 CENELEC 0 3 1440 EN 60384-14-2 Fixed capacitors for use in electronic equipment Part 14-2: Blank detail specification Fixed capacitors for electromagnetic 2016 CENELEC 0 interference suppression and connection to the supply mains Safety tests only 1441 EN 50193-2-1 Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric 2016 CENELEC 0 instantaneous water heaters 1442 EN 50632-2-14 Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers 2016 CENELEC 0 1443 EN 62779-1 Semiconductor devices - Semiconductor interface for human body communication - Part 1: General requirements 2016 CENELEC 0 1444 EN 62838 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - 2016 CENELEC 0 Safety specifications 1445 EN 60384-3 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic 2016 CENELEC 0 capacitors with solid (MnO2) electrolyte 1446 EN 62325-351 Framework for energy market communications - Part 351: CIM European market model exchange profile 2016 CENELEC 0 1447 EN 60317-39 Specifications for particular types of winding wires - Part 39: Glass-fibre braided resin or varnish-impregnated, bare or 2016 CENELEC 0 enamelled rectangular copper wire, temperature index 180 1448 EN 50290-2-20 Communication cables - Part 2-20: Common design rules and construction - General 2016 CENELEC 0 1449 EN 50090-5-3 Home and Building Electronic Systems (HBES) - Part 5-3: Media and media dependent layers - Radio Frequency for 2016 CENELEC 0 HBES Class 1 1450 EN 61987-21 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List 2016 CENELEC 0 of Properties (LOP) of automated valves for electronic data exchange - Generic structures 1451 EN 60794-1-1 Optical fibre cables - Part 1-1: Generic specification - General 2016 CENELEC 0 1452 EN 61300-1 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and 2016 CENELEC 0 guidance 1453 EN 50193-2-2 Electric instantaneous water heaters - Part 2-2: Performance requirements - Single point of use electric instantaneous 2016 CENELEC 0 showers - Efficiency 1454 EN 62209-1 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from 2016 CENELEC 0 hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) 1455 EN 50527-1 Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical 2016 CENELEC 0 devices - Part 1: General 1456 EN 61987-23 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists 2016 CENELEC 0 of Properties (LOPs) of actuators for electronic data exchange 1457 EN 62601 Industrial networks - Wireless communication network and communication profiles - WIA-PA 2016 CENELEC 0 1458 EN 61800-7- Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems 2016 CENELEC 0 302 - Mapping of profile type 2 to network technologies 1459 EN 50341-2-18 Overhead electrical lines exceeding AC 1 kV - Part 2-18: National Normative Aspects (NNA) for Sweden 2016 CENELEC 0 1460 EN 61703 Mathematical expressions for reliability, availability, maintainability and maintenance support terms 2016 CENELEC 0 1461 EN 61215-1 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements 2016 CENELEC 0 1462 EN 61167 Metal halide lamps - Performance specification 2016 CENELEC 0 1463 CLC/TS 50625- Collection, logistics & Treatment requirements for WEEE - Part 3-2: Technical specification for de-pollution - Lamps 2016 CENELEC 0 3-2 1464 EN 50600-4-3 Information technology - Data centre facilities and infrastructures - Part 4-3: Renewable Energy Factor 2016 CENELEC 0 1465 EN 62433-4 EMC IC modelling - Part 4: Models of integrated circuits for RF immunity behavioural simulation - Conducted immunity 2016 CENELEC 0 modelling (ICIM-CI) 1466 EN 62665 Multimedia systems and equipment - Multimedia e-publishing and e-books technologies - Texture map for auditory 2016 CENELEC 0 presentation of printed texts 1467 EN 62877-2 Electrolyte and water for vented lead acid accumulators - Part 2: Requirements for water 2016 CENELEC 0 1468 EN 62282-3- Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods 2016 CENELEC 0 200 1469 EN 60793-2-40 Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres 2016 CENELEC 0 1470 EN 61754-32 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32: Type DiaLink 2016 CENELEC 0 connector family 1471 EN 60384-1 Fixed capacitors for use in electronic equipment - Part 1: Generic specification 2016 CENELEC 0 1472 EN 60384-14-1 Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification - Fixed capacitors for 2016 CENELEC 0 electromagnetic interference suppression and connection to the supply mains - Assessment level DZ 1473 EN 50290-2-29 Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation 2016 CENELEC 0 compounds: instrumentation, control and field bus cables 1474 EN 50667 Information technology - Automated infrastructure management (AIM) systems - Requirements, data exchange and 2016 CENELEC 0 applications 1475 EN 62387 Radiation protection instrumentation - Passive integrating dosimetry systems for individual, workplace and environmental 2016 CENELEC 0 monitoring of photon and beta radiation 1476 EN 62752 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) 2016 CENELEC 0 1477 EN 62803 Transmitting equipment for radiocommunication - Frequency response of optical-to-electric conversion device in 2016 CENELEC 0 highfrequency radio over fibre systems - Measurement method 1478 EN 61169-54 Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer 2016 CENELEC 0 series 4,3-10 ,_خ conductor, nominal characteristic impedance 50 1479 EN 62841-2-11 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular 2016 CENELEC 0 requirements for hand-held reciprocating saws 1480 EN 50632-2-17 Electric motor-operated tools - Dust measurement procedure - Part 2-17: Particular requirements for routers and trimmers 2016 CENELEC 0 1481 EN 60966-2-4 Radio Frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV 2016 CENELEC 0 receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors 1482 EN 60599 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis 2016 CENELEC 0 1483 EN 60317-0-4 Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish 2016 CENELEC 0 impregnated, bare or enamelled rectangular copper wire 1484 EN 61340-2-3 Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid 2016 CENELEC 0 electrostatic charge accumulation 1485 EN 50583-1 Photovoltaics in buildings - Part 1: BIPV modules 2016 CENELEC 0 1486 EN 61251 Electrical insulating materials and systems - A.C. voltage endurance evaluation 2016 CENELEC 0 1487 EN 61754-4- Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4-100: Type SC 2016 CENELEC 0 100 connector family - Simplified receptacle SC-PC connector interfaces 1488 EN 50121-4 Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and 2016 CENELEC 0 telecommunications apparatus 1489 EN 62153-4-7 Metallic communication cable test methods Part 4-7: Electromagnetic compatibility (EMC) Test method for measuring of 2016 CENELEC 0 transfer impedance ZT and screening attenuation as or coupling attenuation aC of connectors and assemblies up to and above 3 GHz Triaxial 1490 EN 60793-2-50 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres 2016 CENELEC 0 1491 EN 61010-2- Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular 2016 CENELEC 0 012 requirements for climatic and environmental testing and other temperature conditioning equipment 1492 EN 50527-2-1 Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical 2016 CENELEC 0 devices - Part 2-1: Specific assessment for workers with cardiac pacemakers 1493 EN 61987-24-1 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-1: 2016 CENELEC 0 Lists of Properties (LOPs) of positioners and I/P converters for electronic data exchange 1494 EN 61784-3 Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions - 2016 CENELEC 0 Incorporates Amendment A1: 2017 1495 EN 50600-2-5 Information technology - Data centre facilities and infrastructures - Part 2-5: Security systems 2016 CENELEC 0 1496 EN 61800-7- Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems 2016 CENELEC 0 303 - Mapping of profile type 3 to network technologies 1497 EN 60700-2 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology 2016 CENELEC 0 1498 EN 61189-3- Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Test 2016 CENELEC 0 719 methods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance change during 1499 EN 60695-10-3 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test 2016 CENELEC 0 1500 EN 62591 Industrial communication networks - Wireless communication network and communication profiles - WirelessHART(tm) 2016 CENELEC 0 1501 EN 60384-18 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface 2016 CENELEC 0 mount capacitors with solid (MnO2) and non-solid electrolyte 1502 EN 62777 Quality evaluation method for the sound field of directional loudspeaker array system 2016 CENELEC 0 1503 EN 61140 Protection against electric shock - Common aspects for installation and equipment 2016 CENELEC 0 1504 EN 50310 Telecommunications bonding networks for buildings and other structures 2016 CENELEC 0 1505 EN 61069-5 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system 2016 CENELEC 0 assessment - Part 5: Assessment of system dependability 1506 EN 60317-31 Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare or 2016 CENELEC 0 enamelled rectangular copper wire, temperature index 180 1507 EN 61076-3- Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for 2016 CENELEC 0 120 rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A 1508 EN 61800-7-1 Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - 2016 CENELEC 0 Interface definition 1509 EN 60154-2 Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides 2016 CENELEC 0 1510 EN 60424-1 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General specification 2016 CENELEC 0 1511 EN 60068-3-13 Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering 2016 CENELEC 0 1512 EN 50244 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use 2016 CENELEC 0 and maintenance 1513 EN 62722-1 Luminaire performance - Part 1: General requirements 2016 CENELEC 0 1514 EN 61753-382- Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized 2016 CENELEC 0 2 singlemode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment 1515 EN 62132-1 Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions 2016 CENELEC 0 1516 EN 50600-3-1 Information technology - Data centre facilities and infrastructures - Part 3-1: Management and operational information 2016 CENELEC 0 1517 EN 61069-2 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system 2016 CENELEC 0 assessment - Part 2: Assessment methodology 1518 EN 60393-5 Potentiometers for use in electronic equipment - Part 5: Sectional specification - Single-turn rotary low-power wirewound 2016 CENELEC 0 and nonwirewound potentiometers 1519 EN 60958-4-1 Digital audio interface - Part 4-1: Professional applications - Audio content 2016 CENELEC 0 1520 EN 50632-2-19 Electric motor-operated tools - Dust measurement procedure - Part 2-19: Particular requirements for jointers 2016 CENELEC 0 1521 EN 62317-6 Ferrite cores - Dimensions - Part 6: ETD-cores for use in power supplies 2016 CENELEC 0 1522 EN 61853-2 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and 2016 CENELEC 0 module operating temperature measurements 1523 EN 50121-3-2 Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus 2016 CENELEC 0 1524 EN 60851-4 Winding wires - Test methods - Part 4: Chemical properties 2016 CENELEC 0 1525 EN 50632-3-9 Electric motor-operated tools - Dust measurement procedure - Part 3-9: Particular requirements for transportable mitre saws 2016 CENELEC 0 1526 EN 60974-6 Arc welding equipment - Part 6: Limited duty equipment 2016 CENELEC 0 1527 EN 62618 Radiation protection instrumentation - Spectroscopy-based alarming Personal Radiation Detectors (SPRD) for the detection 2016 CENELEC 0 of illicit trafficking of radioactive material 1528 EN 61003-2 Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 2: Guidance 2016 CENELEC 0 for inspection and routine testing 1529 EN 60728-5 Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment 2016 CENELEC 0 1530 EN 60534-2-3 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures 2016 CENELEC 0 1531 EN 61800-7- Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems 2016 CENELEC 0 304 - Mapping of profile type 4 to network technologies 1532 EN 60191-6-13 Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Finepitch 2016 CENELEC 0 Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA) 1533 EN 61914 Cable cleats for electrical installations 2016 CENELEC 0 1534 EN 61800-7- Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems 2016 CENELEC 0 201 - Profile type 1 specification 1535 EN 60335-2-3 Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons 2016 CENELEC 0 1536 EN 62660-3 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements 2016 CENELEC 0 1537 EN 50341-2-23 Overhead electrical lines exceeding AC 1 kV - Part 2-23: National Normative Aspects (NNA) for SLOVAKIA (based on 2016 CENELEC 0 EN 50341-1:2012) 1538 EN 62722-2-1 Luminaire performance - Part 2-1: Particular requirements for LED luminaires 2016 CENELEC 0 1539 EN 62343-4-1 Dynamic modules - Part 4-1: Software and hardware interface - 1 x 9 wavelength selective switch 2016 CENELEC 0 1540 EN 61987-12 Industrial- Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 12: 2016 CENELEC 0 Lists of properties (LOPs) for flow measuring equipment for electronic data exchange 1541 EN 61804-4 Function blocks (FB) for process control and Electronic Device Description Language (EDDL) - Part 4: EDD interpretation 2016 CENELEC 0 1542 EN 62575-1 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification 2016 CENELEC 0 1543 EN 50290-2-37 Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables 2016 CENELEC 0 1544 EN 60965 Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main 2016 CENELEC 0 control room 1545 EN 50561-3 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and 2016 CENELEC 0 methods of measurement - Part 3: Apparatus operating above 30 MHz 1546 EN 61069-6 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system 2016 CENELEC 0 assessment - Part 6: Assessment of system operability 1547 EN 61290-4-1 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method 2016 CENELEC 0 1548 EN 60695-1-21 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary 2016 CENELEC 0 and relevance of test methods 1549 EN 60317-32 Specifications for particular types of winding wires - Part 32: Glass fibre wound, resin or varnish impregnated, bare or 2016 CENELEC 0 enamelled rectangular copper wire, temperature index 155 1550 EN 62231-1 Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV - Part 1: 2016 CENELEC 0 Dimensional, mechanical and electrical characteristics 1551 EN 62702-1-1 Audio Archive System - Part 1-1: DVD disk and data migration for long term audio data storage 2016 CENELEC 0 1552 EN 61094-3 Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard 2016 CENELEC 0 microphones by the reciprocity technique 1553 EN 61227 Nuclear power plants - Control rooms - Operator controls 2016 CENELEC 0 1554 EN 61189-5-1 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General 2016 CENELEC 0 test methods for materials and assemblies - Guidance for printed board assemblies 1555 EN 60195 Method of measurement of current noise generated in fixed resistors 2016 CENELEC 0 1556 EN 62631-3-2 Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC 2016 CENELEC 0 Methods) - Surface resistance and surface resistivity 1557 EN 61982-4 Secondary batteries (except lithium) for the propulsion of electric road vehicles - Part 4: Safety requirements of nickel- 2016 CENELEC 0 metal hydride cells and modules 1558 EN 62056-7-5 Electricity metering data exchange - The DLMS/COSEM suite - Part 7-5: Local data transmission profiles for Local 2016 CENELEC 0 Networks (LN) 1559 EN 60793-2-20 Optical fibres - Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres 2016 CENELEC 0 1560 EN 60424-4 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores 2016 CENELEC 0 1561 EN 62788-1-4 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical 2016 CENELEC 0 transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength 1562 EN 61069-3 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system 2016 CENELEC 0 assessment - Part 3: Assessment of system functionality 1563 EN 60958-4-4 Digital audio interface - Part 4-4: Professional applications - Physical and electrical parameters 2016 CENELEC 0 1564 EN 60958-4-2 Digital audio interface - Part 4-2: Professional applications - Metadata and subcode 2016 CENELEC 0 1565 EN 60393-6 Potentiometers for use in electronic equipment - Part 6: Sectional specification - Surface mount preset potentiometers 2016 CENELEC 0 1566 EN 61466-1 Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 1: Standard strength 2016 CENELEC 0 classes and end fittings 1567 EN 62056-4-7 Electricity metering data exchange - The DLMS/COSEM suite - Part 4-7: DLMS/COSEM transport layer for IP networks 2016 CENELEC 0 1568 CLC/TS 61643- Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling 2016 CENELEC 0 22 networks - Selection and application principles 1569 EN 60350-1 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring 2016 CENELEC 0 Performance 1570 EN 62087-3 Audio, video, and related equipment - Determination of power consumption - Part 3: Television sets 2016 CENELEC 0 1571 EN 62694 Radiation protection instrumentation - Backpack-type radiation detector (BRD) for the detection of illicit trafficking of 2016 CENELEC 0 radioactive material 1572 EN 62952-2 Power sources for a wireless communication device - Part 2: Profile for power modules with batteries 2016 CENELEC 0 1573 EN 62864-1 Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system 2016 CENELEC 0 1574 EN 61076-3- Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors 2016 CENELEC 0 110 for data transmission with frequencies up to 3 000 MHz 1575 EN 61754-6- Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6-100: Type MU 2016 CENELEC 0 100 connector family - Simplified receptacle MU-PC connector interfaces 1576 EN 61800-7- Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems 2016 CENELEC 0 202 - Profile type 2 specification 1577 EN 61340-4-9 Electrostatics - Part 4-9: Standard test methods for specific applications - Garments 2016 CENELEC 0 1578 EN 61869-6 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers 2016 CENELEC 0 1579 EN 61669 Electroacoustics - Measurement of real-ear acoustical performance characteristics of hearing aids 2016 CENELEC 0 1580 EN 62264-4 Enterprise-control system integration - Part 4: Object model attributes for manufacturing operations management 2016 CENELEC 0 integration 1581 EN 62631-3-3 Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC 2016 CENELEC 0 Methods) - Insulation resistance 1582 EN 60076-10 Power Transformers Part 10: Determination of Sound Levels 2016 CENELEC 0 1583 EN 61754-31 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 31: Type N-FO 2016 CENELEC 0 connector family 1584 EN 60793-2 Optical fibres - Part 2: Product specifications - General 2016 CENELEC 0 1585 EN 62047-26 Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro 2016 CENELEC 0 trench and needle structures 1586 EN 55011 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of 2016 CENELEC 0 measurement - Incorporates Amendment A1: 2017 1587 EN 62047-25 Semiconductor devices - Micro-electromechanical devices - Part 25: Silicon based MEMS fabrication technology - 2016 CENELEC 0 Measurement method of pull-press and shearing strength of micro bonding area 1588 EN 50582 Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing 2016 CENELEC 0 1589 EN 62822-2 Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 2016 CENELEC 0 GHz) - Part 2: Arc welding equipment 1590 EN 62779-2 Semiconductor devices - Semiconductor interface for human body communication - Part 2: Characterization of interfacing 2016 CENELEC 0 performances 1591 EN 61987-13 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13: Lists 2016 CENELEC 0 of properties (LOP) for Pressure Measuring Equipment for electronic data exchange 1592 EN 62361-100 Power systems management and associated information exchange - Interoperability in the long term - Part 100: CIM 2016 CENELEC 0 profiles to XML schema mapping 1593 EN 60317-33 Specifications for particular types of winding wires - Part 33: Glass fibre wound, resin or varnish impregnated, bare or 2016 CENELEC 0 enamelled rectangular copper wire, temperature index 200 1594 EN 61069-7 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system 2016 CENELEC 0 assessment - Part 7: Assessment of system safety 1595 EN 50152-3-3 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-3: Measurement, control and 2016 CENELEC 0 protection devices for specific use in a.c. traction systems - Voltage transformers 1596 EN 61300-2-47 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - 2016 CENELEC 0 Thermal shocks 1597 EN 50604-1 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test 2016 CENELEC 0 methods 1598 EN 61180 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment 2016 CENELEC 0 1599 EN 60034-27-3 Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating 2016 CENELEC 0 electrical machines 1600 EN 50289-1-11 Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance, 2016 CENELEC 0 input impedance, return loss 1601 EN 60794-3-20 Optical fibre cables - Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables 2016 CENELEC 0 1602 EN 62077 Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification 2016 CENELEC 0 1603 EN 61755-3-32 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector 2016 CENELEC 0 parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules 1604 EN 61829 Photovoltaic (PV) array - On-site measurement of currentvoltage characteristics 2016 CENELEC 0 1605 EN 62808 Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation 2016 CENELEC 0 devices 1606 EN 61968-8 Application integration at electric utilities - System interfaces for distribution management - Part 8: Interfaces for customer 2016 CENELEC 0 operations 1607 EN 50632-2-3 Electric motor-operated tools - Dust measurement procedure - Part 2-3: Particular requirements for concrete grinders and 2016 CENELEC 0 disktype sanders 1608 EN 60401-3 Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in 2016 CENELEC 0 manufacturers catalogues of transformer and inductor cores 1609 EN 61069-1 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system 2016 CENELEC 0 assessment - Part 1: Terminology and basic concepts 1610 EN 62343-3-2 Dynamic modules - Part 3-2: Performance specification templates - Optical channel monitor 2016 CENELEC 0 1611 EN 61189-2- Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-719: Test 2016 CENELEC 0 719 methods for materials for interconnection structures - Relative permittivity and loss tangent (500 MHz to 10 GHz) 1612 EN 50242 Electric dishwashers for household use - Methods for measuring the performance 2016 CENELEC 0 1613 EN 61968-6 Application integration at electric utilities - System interfaces for distribution management - Part 6: Interfaces for 2016 CENELEC 0 maintenance and construction 1614 EN 62610-5 Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 2016 CENELEC 0 60297 and IEC 60917 series - Part 5: Cooling performance evaluation for indoor cabinets 1615 EN 62087-1 Audio, video, and related equipment - Determination of power consumption - Part 1: General 2016 CENELEC 0 1616 EN 61058-2-6 Switches for appliances - Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, 2016 CENELEC 0 transportable tools and lawn and garden machinery 1617 EN 62952-1 Power sources for a wireless communication device - Part 1: General requirements of power modules 2016 CENELEC 0 1618 EN 61800-7- Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems 2016 CENELEC 0 203 - Profile type 3 specification 1619 EN 50632-3-1 Electric motor-operated tools - Dust measurement procedure - Part 3-1: Particular requirements for transportable table saws 2016 CENELEC 0 1620 EN 61069-4 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system 2016 CENELEC 0 assessment - Part 4: Assessment of system performance 1621 EN 60909-0 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents 2016 CENELEC 0 1622 EN 61515 Mineral insulated metal-sheathed thermocouple cables and thermocouples 2016 CENELEC 0 1623 EN 61970-552 Energy management system application program interface (EMS-API) - Part 552: CIMXML Model exchange format 2016 CENELEC 0 1624 EN 61069-8 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system 2016 CENELEC 0 assessment - Part 8: Assessment of other system properties 1625 EN 62533 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material 2016 CENELEC 0 1626 EN 60393-2 Potentiometers for use in electronic equipment - Part 2: Sectional specification - Lead-screw actuated and rotary preset 2016 CENELEC 0 potentiometers 1627 EN 61094-5 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones 2016 CENELEC 0 by comparison 1628 EN 50193-1 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements 2016 CENELEC 0 1629 CLC/TR 50670 External fire exposure to roofs in combination with photovoltaic (PV) arrays - Test method(s) 2016 CENELEC 0 1630 CLC/TS 50612 Portable electrical apparatus for the measurement of combustion flue gas parameters - Guide to their use in the process of 2016 CENELEC 0 commissioning, servicing and maintaining gas fired appliances 1631 EN 62849 Performance evaluation methods of mobile household robots 2016 CENELEC 0 1632 EN 50600-4-1 Information technology - Data centre facilities and infrastructures - Part 4-1: Overview of and general requirements for key 2016 CENELEC 0 performance indicators 1633 EN 60297-3- Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 2016 CENELEC 0 109 in) series - Part 3-109: Dimensions of chassis for embedded computing devices 1634 EN 60424-2 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores 2016 CENELEC 0 1635 EN 50152-3-2 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-2: Measurement, control and 2016 CENELEC 0 protection devices for specific use in a.c. traction systems - Current transformers 1636 EN 50633 Railway applications - Fixed installations - Protection principles for AC and DC electric traction systems 2016 CENELEC 0 1637 EN 62772 Composite Hollow Core Station Post Insulators for substations with a.c. voltage greater than 1000 V and d.c. voltage 2016 CENELEC 0 greater than 1500V- Definitions, test methods and acceptance criteria 1638 CLC/TS 50131- Alarm systems - Intrusion and hold-up systems - Part 12: Methods and requirements for setting and unsetting of Intruder 2016 CENELEC 0 12 Alarm Systems (IAS) 1639 CLC/TS 50459- Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - 2016 CENELEC 0 3 Driver- Machine Interface - Part 3: Ergonomic arrangements of non ETCS information 1640 EN 50583-2 Photovoltaics in buildings - Part 2: BIPV systems 2016 CENELEC 0 1641 EN 61260-2 Electroacoustics - Octave-band and fractional-octave-band filters - Part 2: Pattern-evaluation tests - Incorporates 2016 CENELEC 0 Amendment A1: 2017 1642 EN 62326-20 Printed boards - Part 20: Printed circuit boards for highbrightness LEDs 2016 CENELEC 0 1643 EN 61215-1-1 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing 2016 CENELEC 0 of crystalline silicon photovoltaic (PV) Modules 1644 EN 62087-4 Audio, video and related equipment - Determination of power consumption - Part 4: Video recording equipment 2016 CENELEC 0 1645 EN 62827-1 Wireless Power Transfer - Management - Part 1: Common Components 2016 CENELEC 0 1646 EN 61260-3 Electroacoustics - Octave-band and fractional-octave-band filters - Part 3: Periodic tests 2016 CENELEC 0 1647 EN 61400-13 Wind turbines - Part 13: Measurement of mechanical loads 2016 CENELEC 0 1648 EN 61800-7- Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems 2016 CENELEC 0 301 - Mapping of profile type 1 to network technologies 1649 EN 61753-052- Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibre 2016 CENELEC 0 6 nonconnectorized fixed attenuator - Category O in outside plant environment 1650 EN 61169-58 Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - 2016 CENELEC 0 (type SBMA) _خ Characteristic impedance 50 1651 EN 61300-2-37 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - 2016 CENELEC 0 Cable bending for fibre optic closures 1652 EN 50290-2-38 Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables 2016 CENELEC 0 1653 EN 62605 Multimedia systems and equipment - Multimedia e-publishing and e-books - Interchange format for e-dictionaries 2016 CENELEC 0 1654 EN 62718 Railway applications - Rolling stock - DC supplied electronic ballasts for lighting fluorescent lamps 2016 CENELEC 0 1655 EN 60154-1 Flanges for waveguides - Part 1: General requirements 2016 CENELEC 0 1656 EN 61162-1 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and 2016 CENELEC 0 multiple listeners 1657 EN 62625-2 Electronic railway equipment - On board driving data recording system - Part 2: Conformity testing 2016 CENELEC 0 1658 EN 60702-3 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 3: Guidance for use 2016 CENELEC 0 1659 EN 60758 Synthetic quartz crystal - Specifications and guidelines for use 2016 CENELEC 0 1660 EN 61000-1-2 Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of 2016 CENELEC 0 electrical and electronic systems including equipment with regard to electromagnetic phenomena 1661 EN 60127-7 Miniature fuses - Part 7: Miniature fuse-links for special applications 2016 CENELEC 0 1662 EN 60068-2-39 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with 2016 CENELEC 0 low air pressure tests 1663 EN 62052-31 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety 2016 CENELEC 0 requirements and tests 1664 EN 60153-1 Hollow metallic waveguides - Part 1: General requirements and measuring methods 2016 CENELEC 0 1665 EN 60669-2-5 Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related 2016 CENELEC 0 accessories for use in home and building electronic systems (HBES) 1666 EN 80369-5 Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation 2016 CENELEC 0 applications 1667 EN 50632-2-5 Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular requirements for circular saws 2016 CENELEC 0 1668 EN 61291-2 Optical amplifiers - Part 2: Single channel applications - Performance specification template 2016 CENELEC 0 1669 CLC/TR 50656 SPD application in conjunction with Class II equipment 2016 CENELEC 0 1670 EN 60456 Clothes washing machines for household use - Methods for measuring the performance 2016 CENELEC 0 1671 EN 50600-4-2 Information technology - Data centre facilities and infrastructures - Part 4-2: Power Usage Effectiveness 2016 CENELEC 0 1672 EN 62276 Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods 2016 CENELEC 0 1673 EN 62220-1-1 Medical electrical equipment - Characteristics of digital x-ray imaging devices - Part 1-1: Determination of the detective 2015 CENELEC 0 quantum efficiency - Detectors used in radiographic imaging 1674 EN 62734 Industrial networks - Wireless communication network and communication profiles - ISA 100.11a 2015 CENELEC 0 1675 EN 61837-4 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead 2015 CENELEC 0 connections - Part 4: Hybrid enclosure outlines 1676 EN 62744 Representation of states of objects by graphical symbols 2015 CENELEC 0 1677 EN 50341-2-19 Overhead electrical lines exceeding AC 1 kV - Part 2-19: National Normative Aspects (NNA) for CZECH REPUBLIC 2015 CENELEC 0 (based on EN 50341-1:2012) 1678 EN 60601-2-62 Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high 2015 CENELEC 0 intensity therapeutic ultrasound (HITU) equipment 1679 CLC/TS 50590 Electricity metering data exchange - Lower layer PLC profile using Adaptive Multi Carrier Spread-Spectrum (AMC-SS) 2015 CENELEC 0 modulation 1680 EN 60079-28 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation 2015 CENELEC 0 1681 EN 60940 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic 2015 CENELEC 0 interference suppression 1682 EN 62790 Junction boxes for photovoltaic modules - Safety requirements and tests 2015 CENELEC 0 1683 EN 61557-8 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2015 CENELEC 0 or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems 1684 EN 60404-8-1 Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials 2015 CENELEC 0 1685 EN 61010-2- Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular 2015 CENELEC 0 081 requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes 1686 EN 62320-1 Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 1: AIS 2015 CENELEC 0 Base Stations - Minimum operational and performance requirements, methods of testing and required test results 1687 EN 50288-10-2 Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification 2015 CENELEC 0 for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications 1688 EN 50377-17-2 Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - 2015 CENELEC 0 Part 17-2: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre an 1689 EN 61810-1 Electromechanical elementary relays - Part 1: General and safety requirements 2015 CENELEC 0 1690 EN 60793-1-50 Optical fibres - Part 1-50: Measurement methods - Damp heat (steady state) tests 2015 CENELEC 0 1691 EN 60068-2-58 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization 2015 CENELEC 0 and to soldering heat of surface mounting devices (SMD) - Incorporates Amendment A1: 2018 1692 EN 62769-6 Field Device Integration (FDI) - Part 6: FDI Technology Mapping 2015 CENELEC 0 1693 EN 62271-3 High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850 2015 CENELEC 0 1694 EN 62541-9 OPC unified architecture - Part 9: Alarms and conditions 2015 CENELEC 0 1695 EN 62150-3 Fibre optic active components and devices - Test and measurement procedures - Part 3: Optical power variation induced by 2015 CENELEC 0 mechanical disturbance in optical receptacles and transceiver interfaces 1696 EN 60601-2-17 Medical electrical equipment - Part 2-17: Particular requirements for the basic safety and essential performance of 2015 CENELEC 0 automatically-controlled brachytherapy afterloading equipment 1697 EN 60079-29-2 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable 2015 CENELEC 0 gases and oxygen 1698 EN 61810-3 Electromechanical elementary relays - Part 3: Relays with forcibly guided (mechanically linked) contacts 2015 CENELEC 0 1699 EN 50625-2-2 Collection, logistics & Treatment requirements for WEEE - Part 2-2: Treatment requirements for WEEE containing 2015 CENELEC 0 CRTs and flat panel displays 1700 EN 60862-1 Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification 2015 CENELEC 0 1701 EN 60086-1 Primary batteries - Part 1: General 2015 CENELEC 0 1702 EN 62776 Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications 2015 CENELEC 0 1703 EN 60875-1 Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - 2015 CENELEC 0 Part 1: Generic specification 1704 EN 50342-6 Lead-acid starter batteries - Part 6: Batteries for Micro-Cycle Applications 2015 CENELEC 0 1705 EN 62317-13 Ferrite cores - Dimensions - Part 13: PQ-cores for use in power supply applications 2015 CENELEC 0 1706 EN 61375-2-3 Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile - Incorporates 2015 CENELEC 0 Amendment A1: 2017 1707 EN 60885-3 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded 2015 CENELEC 0 power cables 1708 EN 45544-2 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic 2015 CENELEC 0 gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement 1709 EN 61557-16 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2015 CENELEC 0 or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical e 1710 EN 60836 Specifications for unused silicone insulating liquids for electrotechnical purposes 2015 CENELEC 0 1711 EN 60512-29- Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 2015 CENELEC 0 100 style connectors - Tests 29a to 29g 1712 EN 61082-1 Preparation of documents used in electrotechnology - Part 1: Rules 2015 CENELEC 0 1713 EN 62379-3 Common control interface for networked digital audio and video products - Part 3: Video 2015 CENELEC 0 1714 EN 61340-4-6 Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps 2015 CENELEC 0 1715 EN 62769-103- Field Device Integration (FDI) - Part 103-1: Profiles - PROFIBUS 2015 CENELEC 0 1 1716 EN 140402 Blank Detail Specification: Fixed low power wirewound surface mount (SMD) resistors - Incorporates Amendment A1: 2015 CENELEC 0 2016 1717 EN 60601-2-3 Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short- 2015 CENELEC 0 wave therapy equipment - Incorporates Amendment A1: 2016 1718 EN 61557-9 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2015 CENELEC 0 or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems 1719 CLC/TS 52056- Electricity metering data exchange - The DLMS/COSEM suite - Part 8-4: Narrow-band OFDM PRIME PLC 2015 CENELEC 0 8-4 communication profile for neighbourhood networks 1720 EN 62634 Radio data system (RDS) - Receiver products and characteristics - Methods of Measurement 2015 CENELEC 0 1721 EN 62878-1-1 Device embedded substrate - Part 1-1: Generic specification - Test methods 2015 CENELEC 0 1722 EN 61162-460 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and 2015 CENELEC 0 multiple listeners - Ethernet interconnection - Safety and security - Remains Current 1723 EN 61169-51 Radio-frequency connectors - Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer 2015 CENELEC 0 conductors 13,5 mm with bayonet lock - Characteristic impedance 50 O (type QLI) 1724 EN 50200 Method of test for resistance to fire of unprotected small cables for use in emergency circuits 2015 CENELEC 0 1725 EN 62841-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General 2015 CENELEC 0 requirements - Incorporating corrigendum October 2015 1726 EN 60601-2-63 Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental 2015 CENELEC 0 extraoral X-ray equipment 1727 EN IEC 60079- Explosive atmospheres Part 7: Equipment protection by increased safety "e" - Incorporates Amendment A1: 2018 2015 CENELEC 0 7 1728 EN 62680-2-1 Universal Serial Bus interfaces for data and power - Part 2-1: Universal Serial Bus Specification, Revision 2.0 (TA 14) 2015 CENELEC 0 1729 EN 60335-2-95 Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving 2015 CENELEC 0 garage doors for residential use - Incorporates Amendment A1: 2015 1730 EN 50341-2-7 Overhead electrical lines exceeding AC 1 kV - Part -2-7: National Normative Aspects (NNA) for FINLAND 2015 CENELEC 0 1731 EN 62320-3 Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 3: 2015 CENELEC 0 Repeater stations - Minimum operational and performance requirements - Methods of test and required test results 1732 EN 62842 File allocation system with minimized reallocation for multimedia home server (TA 8) 2015 CENELEC 0 1733 EN 50598-3 Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco 2015 CENELEC 0 design approach through life cycle assessment including product category rules and the content of environmental declarations 1734 EN 50288-9-2 Multi-element metallic cables used in analogue and digital communication and control - Part 9-2: Sectional specification 2015 CENELEC 0 for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications 1735 EN 62769-4 Field Device Integration (FDI) - Part 4: FDI Packages 2015 CENELEC 0 1736 EN 60335-2-5 Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers 2015 CENELEC 0 1737 EN 62026-3 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet 2015 CENELEC 0 1738 EN 50393 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV 2015 CENELEC 0 1739 EN 61174 Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system 2015 CENELEC 0 (ECDIS) - Operational and performance requirements, methods of testing and required test results 1740 EN 60809 Lamps for road vehicles - Dimensional, electrical and luminous requirements - Incorporates Amendment A2: 2018 2015 CENELEC 0 1741 EN 50617-2 Railway Applications - Technical parameters of train detection systems for the interoperability of the trans-European 2015 CENELEC 0 railway system - Part 2: Axle counters 1742 EN 61290-1-3 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method 2015 CENELEC 0 1743 EN 60601-2-25 Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of 2015 CENELEC 0 electrocardiographs 1744 EN 62680-2-2 Universal Serial Bus interfaces for data and power - Part 2-2: Universal Serial Bus - Micro-USB Cables and Connectors 2015 CENELEC 0 Specification, Revision 1.01 (TA 14) 1745 EN 62053-24 Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental 2015 CENELEC 0 frequency (classes 0,5 S, 1 S and 1) - Incorporates Amendment A1: 2017 1746 EN 62680-1-1 Universal Serial Bus interfaces for data and power - Part 1-1: Universal Serial Bus interfaces - Common components - USB 2015 CENELEC 0 Battery Charging Specification, Revision 1.2 (TA 14) 1747 EN 62570 Standard practice for marking medical devices and other items for safety in the magnetic resonance environment 2015 CENELEC 0 1748 EN 62087-6 Audio, video and related equipment - Determination of power consumption - Part 6: Audio equipment 2015 CENELEC 0 1749 EN 62343-1-2 Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized) 2015 CENELEC 0 1750 EN 60601-2-23 Medical electrical equipment - Part 2-23: Particular requirements for the basic safety and essential performance of 2015 CENELEC 0 transcutaneous partial pressure monitoring equipment 1751 EN 80601-2-58 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens 2015 CENELEC 0 removal devices and vitrectomy devices for ophthalmic surgery 1752 EN 61811-1 Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail 2015 CENELEC 0 specification 1753 EN 45544-1 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic 2015 CENELEC 0 gases and vapours - Part 1: General requirements and test methods 1754 EN 60601-2-10 Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve 2015 CENELEC 0 and muscle stimulators - Incorporates Amendment A1: 2016 1755 EN 62106 Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 2015 CENELEC 0 108,0 MHz 1756 EN 61169-52 Radio-frequency connectors - Part 52: Sectional specification for series MMCX RF coaxial connectors 2015 CENELEC 0 1757 EN 62007-1 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential 2015 CENELEC 0 ratings and characteristics 1758 EN 50223 Stationary electrostatic application equipment for ignitable flock material - Safety requirements 2015 CENELEC 0 1759 EN 62656-1 Standardized product ontology register and transfer by spreadsheets - Part 1: Logical structure for data parcels 2015 CENELEC 0 1760 EN 62541-3 OPC unified architecture - Part 3: Address Space Model 2015 CENELEC 0 1761 EN 62321-6 Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated 2015 CENELEC 0 diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS) 1762 EN 50180-1 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 1: General requirements 2015 CENELEC 0 for bushings 1763 EN 60068-2-60 Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test 2015 CENELEC 0 1764 EN 62604-1 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification 2015 CENELEC 0 1765 EN 62769-2 Field Device Integration (FDI) - Part 2: FDI Client 2015 CENELEC 0 1766 EN 50617-1 Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European 2015 CENELEC 0 railway system - Part 1: Track circuits 1767 EN 50405 Railway applications - Current collection systems - Pantographs, testing methods for contact strips - Incorporates 2015 CENELEC 0 Amendment A1: 2016 1768 EN 60601-1-11 Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral 2015 CENELEC 0 Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment 1769 EN 62714-2 Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - 2015 CENELEC 0 Part 2: Role class libraries 1770 EN 60172 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires 2015 CENELEC 0 1771 EN 60601-2-66 Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing 2015 CENELEC 0 instruments and hearing instrument systems 1772 EN 60601-2-49 Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of 2015 CENELEC 0 multifunction patient monitoring equipment 1773 EN 60318-3 Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones 2015 CENELEC 0 used in audiometry 1774 EN 50270 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or 2015 CENELEC 0 oxygen 1775 EN 60519-1 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements 2015 CENELEC 0 1776 EN 55016-1-5 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and 2015 CENELEC 0 immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz - Incorporates Amendment A1: 2017 1777 EN 62484 Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit 2015 CENELEC 0 trafficking of radioactive material 1778 EN 60705 Household microwave ovens - Methods for measuring performance 2015 CENELEC 0 1779 EN 55016-1-6 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and 2015 CENELEC 0 immunity measuring apparatus - EMC antenna calibration - Incorporates Amendment A1: 2017 1780 EN 60079-26 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga 2015 CENELEC 0 1781 EN 61290-1-1 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method 2015 CENELEC 0 1782 EN 50632-2-1 Electric motor-operated tools - Dust measurement procedure - Part 2-1: Particular requirements for diamond core drills 2015 CENELEC 0 1783 EN 60079-32-2 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests 2015 CENELEC 0 1784 EN 62811 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance 2015 CENELEC 0 requirements for low frequency squarewave operation 1785 EN 62769-5 Field Device Integration (FDI) - Part 5: FDI Information Model 2015 CENELEC 0 1786 CLC/TR 60079- Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance 2015 CENELEC 0 32-1 1787 EN 62541-8 OPC unified architecture - Part 8: Data Access 2015 CENELEC 0 1788 EN 50341-2-20 Overhead electrical lines exceeding AC 45 kV - Part 2-20: National Normative Aspects (NNA) for ESTONIA (based on 2015 CENELEC 0 EN 50341-1:2012) 1789 EN 60598-2-5 Luminaires - Part 2-5: Particular requirements - Floodlights 2015 CENELEC 0 1790 EN 60079-6 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" 2015 CENELEC 0 1791 EN 61400-27-1 Wind turbines - Part 27-1: Electrical simulation models - Wind turbines 2015 CENELEC 0 1792 EN 62379-7 Common Control Interface for networked digital audio and video products - Part 7: Measurements 2015 CENELEC 0 1793 EN 62541-5 OPC unified architecture - Part 5: Information Model 2015 CENELEC 0 1794 EN 61755-3-31 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector 2015 CENELEC 0 parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules 1795 EN 50615 Household and similar electrical appliances - Safety - Particular requirements for devices for fire prevention and 2015 CENELEC 0 suppression for electric hobs (cooktops) 1796 EN 62366-1 Medical devices - Part 1: Application of usability engineering to medical devices - Incorporating corrigendum December 2015 CENELEC 0 2015 1797 EN 62769-1 Field device integration (FDI) - Part 1: Overview 2015 CENELEC 0 1798 EN 62656-3 Standardized product ontology register and transfer by spreadsheets - Part 3: Interface for Common Information Model 2015 CENELEC 0 1799 EN 60384-25 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium 2015 CENELEC 0 electrolytic capacitors with conductive polymer solid electrolyte 1800 EN 60794-3-10 Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried or lashed aerial optical 2015 CENELEC 0 telecommunication cables 1801 CLC/TS 50459- Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - 2015 CENELEC 0 2 Driver- Machine Interface - Part 2: Ergonomic arrangements of GSM-R information 1802 EN 60424-8 Ferrite cores - Guidelines on the limits of surface irregularities - Part 8: PQ-cores 2015 CENELEC 0 1803 CLC/TR 50607- Satellite signal distribution over a single coaxial cable - Part 10: Implementation guideline 2015 CENELEC 0 10 1804 EN 60398 Installations for electroheating and electromagnetic processing - General performance test methods 2015 CENELEC 0 1805 EN 61169-47 Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, 2015 CENELEC 0 (cable networks (type F-Quick _خ typically for use in 75 1806 EN 60601-2-47 Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of 2015 CENELEC 0 ambulatory electrocardiographic systems 1807 EN 50597 Energy Consumption of Vending Machines 2015 CENELEC 0 1808 EN 50411-2-10 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-10: Sealed 2015 CENELEC 0 fibre splice closures type 2, category G, for FTTH optical distribution networks 1809 EN 60601-2-8 Medical electrical equipment - Part 2-8: Particular requirements for the basic safety and essential performance of 2015 CENELEC 0 therapeutic Xray equipment operating in the range 10 kV to 1 MV - Incorporates Amendment A1: 2016 1810 EN 60601-2-18 Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of 2015 CENELEC 0 endoscopic equipment 1811 EN 61427-2 Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid 2015 CENELEC 0 applications 1812 EN 62271-104 High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages higher than 52 kV 2015 CENELEC 0 1813 EN 61400-25-3 Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange 2015 CENELEC 0 models 1814 EN 60700-1 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing 2015 CENELEC 0 1815 EN 62769-3 Devices and integration in enterprise systems; Field Device Integration - Part 3: FDI Server 2015 CENELEC 0 1816 EN 50632-2-22 Electric motor-operated tools - Dust measurement procedure - Part 2-22: Particular requirements for cut-off machines and 2015 CENELEC 0 wall chasers 1817 EN 62741 Demonstration of dependability requirements - The dependability case 2015 CENELEC 0 1818 EN 60320-1 Appliance couplers for household and similar general purposes Part 1: General requirements 2015 CENELEC 0 1819 EN 62676-4 Video surveillance systems for use in security applications - Part 4: Application guidelines 2015 CENELEC 0 1820 EN 62541-6 OPC unified architecture - Part 6: Mappings 2015 CENELEC 0 1821 EN 50289-4-17 Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the 2015 CENELEC 0 sheath of electrical and optical fibre cable 1822 EN 62870 Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General 2015 CENELEC 0 safety requirements 1823 EN 60793-1-43 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement 2015 CENELEC 0 1824 EN 62841-3-10 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular 2015 CENELEC 0 requirements for transportable cut-off machines - Incorporating corrigendum July 2016; Incorporates Amendment A11: 2017 1825 EN 50229 Electric clothes washer-dryers for household use - Methods of measuring the performance - Incorporating corrigendum 2015 CENELEC 0 February 2016 1826 EN 62885-3 Surface cleaning appliances - Part 3: Wet carpet cleaning appliances - Methods for measuring the performance 2015 CENELEC 0 1827 EN 61800-2 Adjustable Speed Electrical Power Drive Systems Part 2: General Requirements Rating Specifications for Low Voltage 2015 CENELEC 0 Adjustable Frequency a.c. Power Drive Systems 1828 EN 61175-1 Industrial systems, installations and equipment and industrial products - Designation of signals - Part 1: Basic rules 2015 CENELEC 0 1829 EN 50216-4 Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer 2015 CENELEC 0 pocket, wheel assembly) 1830 EN 60076-19 Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of the losses on power 2015 CENELEC 0 transformers and reactors 1831 EN 50629 Energy performance of large power transformers (Um > 36 kV or Sr â__ 40 MVA) - Incorporates Amendment A2: 2018 2015 CENELEC 0 1832 EN 60384-24 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum 2015 CENELEC 0 electrolytic capacitors with conductive polymer solid electrolyte 1833 EN 50607 Satellite signal distribution over a single coaxial cable - Second generation 2015 CENELEC 0 1834 EN 60143-3 Series Capacitors for Power Systems Part 3: Internal Fuses 2015 CENELEC 0 1835 CLC/TR 50646 Railway Application - Fixed Installations - Specification for reversible d.c. substations 2015 CENELEC 0 1836 EN 50636-2- Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical 2015 CENELEC 0 107 lawnmowers - Incorporates Amendment A1: 2018 1837 EN 50577 Electric cables - Fire resistance test for unprotected electric cables (P classification)) 2015 CENELEC 0 1838 EN 50465 European product standard for combined heating power systems using gas fuel 2015 CENELEC 0 1839 EN 62493 Assessment of lighting equipment related to human exposure to electromagnetic Field 2015 CENELEC 0 1840 EN 62813 Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics 2015 CENELEC 0 1841 EN IEC 60118- Electroacoustics Hearing aids Part 4: Induction-loop systems for hearing aid purposes System performance requirements - 2015 CENELEC 0 4 Incorporates Amendment A1: 2018 1842 EN 61189-5-4 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-4: General 2015 CENELEC 0 test methods for materials and assemblies - Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies 1843 EN 62056-1-0 Electricity metering data exchange - The DLMS/COSEM suite - Part 1-0: Smart metering standardization framework 2015 CENELEC 0 1844 EN 60079-10-2 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres 2015 CENELEC 0 1845 EN 62325-451- Framework for energy market communications - Part 451-5: Problem statement and status request business processes, 2015 CENELEC 0 5 contextual and assembly models for European market 1846 EN 60601-2-26 Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of 2015 CENELEC 0 electroencephalographs 1847 EN 61169-48 Radio-frequency connectors - Part 48: Sectional specification for series BMP R.F. coaxial connectors 2015 CENELEC 0 1848 EN 61340-4-8 Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding - Bags 2015 CENELEC 0 1849 EN 62467-1 Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type 2015 CENELEC 0 ionization chambers 1850 EN 62841-2-9 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular 2015 CENELEC 0 requirements for hand-held tappers and threaders 1851 EN 60127-3 Miniature fuses - Part 3: Sub-miniature fuse-links 2015 CENELEC 0 1852 EN 60601-1-2 Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral 2015 CENELEC 0 Standard: Electromagnetic disturbances - Requirements and tests 1853 EN 50632-1 Electric motor-operated tools - Dust measurement Procedure - Part 1: General requirements 2015 CENELEC 0 1854 EN 62769-109- Field Device Integration (FDI) - Part 109-1: Profiles - HART(r) and WirelessHART(r) 2015 CENELEC 0 1 1855 EN 61010-2- Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular 2015 CENELEC 0 061 requirements for laboratory atomic spectrometers with thermal atomization and ionization 1856 EN 60598-1 Luminaires - Part 1: General requirements and tests - Incorporating corrigendum December 2015; Incorporates Amendment 2015 CENELEC 0 A1: 2018 1857 EN 62541-7 OPC unified architecture - Part 7: Profiles 2015 CENELEC 0 1858 EN 62534 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material 2015 CENELEC 0 1859 EN 61000-6-5 Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and 2015 CENELEC 0 substation environment 1860 EN 62047-16 Semiconductor devices - Micro-electromechanical devices - Part 16: Test methods for determining residual stresses of 2015 CENELEC 0 MEMS films - Wafer curvature and cantilever beam deflection methods 1861 EN 61207-6 Expression of performance of gas analyzers - Part 6:Photometric analyzers 2015 CENELEC 0 1862 EN 60335-2-8 Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar 2015 CENELEC 0 appliances - Incorporates Amendment A1: 2016 1863 EN 60601-2-5 Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic 2015 CENELEC 0 physiotherapy equipment 1864 CLC/TS 50568- Electricity metering data exchange - The DLMS/COSEM suite - Part 8: SMITP B-PSK PLC communication profile for 2015 CENELEC 0 8 neighbourhood networks - Including: The Original-SMITP PLC B-PSK communication profile, The Original-SMITP Local data exchange profile and The Or 1865 EN 61189-5-3 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General 2015 CENELEC 0 test methods for materials and assemblies - Soldering paste for printed board assemblies 1866 EN 50180-3 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for 2015 CENELEC 0 bushing fixations 1867 EN 62559-2 Use case methodology - Part 2: Definition of the template for use cases, actor list and requirements list 2015 CENELEC 0 1868 EN 60063 Preferred number series for resistors and capacitors 2015 CENELEC 0 1869 EN 50117-4-2 Coaxial cables - Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks 2015 CENELEC 0 1870 EN 62317-5 Ferrite cores - Dimensions - Part 5: EP-cores and associated parts for use in inductors and transformers 2015 CENELEC 0 1871 EN 61000-6-7 Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to 2015 CENELEC 0 perform functions in a safety-related system (functional safety) in industrial locations 1872 EN 50288-11-2 Multi-element metallic cables used in analogue and digital communication and control - Part 11-2: Sectional specification 2015 CENELEC 0 for un-screened cables, characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications 1873 EN 50436-6 Alcohol interlocks - Test methods and performance requirements - Part 6: Data security 2015 CENELEC 0 1874 CLC/TR 60079- Explosive atmospheres - Part 33: Equipment protection by special protection s 2015 CENELEC 0 33 1875 EN 50632-2-6 Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers 2015 CENELEC 0 1876 EN 60601-1-12 Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral 2015 CENELEC 0 Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical service 1877 EN 60384-20 Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide 2015 CENELEC 0 film dielectric surface mount d.c. capacitors 1878 EN 55032 Electromagnetic compatibility of multimedia equipment - Emission Requirements 2015 CENELEC 0 1879 EN 60115-8-1 Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low 2015 CENELEC 0 power film resistors for general electronic equipment, classification level G 1880 EN 62135-1 Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation - Incorporating 2015 CENELEC 0 corrigendum February 2016 1881 EN 62541-100 OPC unified architecture - Part 100: Device Interface 2015 CENELEC 0 1882 EN 61340-2-1 Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge 2015 CENELEC 0 1883 EN 60601-2-24 Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion 2015 CENELEC 0 pumps and controllers 1884 EN 60939-3 Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are 2015 CENELEC 0 appropriate 1885 EN 61285 Industrial-process control - Safety of analyzer houses 2015 CENELEC 0 1886 EN 61755-2-5 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-5: Connection 2015 CENELEC 0 parameters of non-dispersion shifted single-mode physically contacting fibres - Angled for reference connection applications 1887 EN 60601-2-16 Medical electrical equipment - Part 2-16: Particular requirements for the basic safety and essential performance of 2015 CENELEC 0 haemodialysis, haemodiafiltration and haemofiltration equipment 1888 EN 61189-5-2 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General 2015 CENELEC 0 test methods for materials and assemblies - Soldering flux for printed board assemblies 1889 EN 61300-3-21 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: 2015 CENELEC 0 Examinations and measurements - Switching time 1890 EN 60286-2 Packaging of components for automatic handling - Part 2: Packaging of components with unidirectional leads on 2015 CENELEC 0 continuous tapes 1891 CLC/TR 50627 Study Report on Electromagnetic Interference between Electrical Equipment/Systems in the Frequency Range Below 150 2015 CENELEC 0 kHz 1892 EN 62682 Management of alarms systems for the process industries 2015 CENELEC 0 1893 EN 61300-3-53 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: 2015 CENELEC 0 Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimo 1894 EN 60704-2-1 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: 2015 CENELEC 0 Particular requirements for vacuum cleaners 1895 EN 62321-7-1 Determination of certain substances in electrotechnical products - Part 7-1: Determination of the presence of hexavalent 2015 CENELEC 0 chromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by the colorimetric method 1896 EN 60730-2-5 Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems 2015 CENELEC 0 1897 EN 62753 Digital terrestrial television receivers for the DTMB system 2015 CENELEC 0 1898 EN 61010-2- Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-051: Particular 2015 CENELEC 0 051 requirements for laboratory equipment for mixing and stirring 1899 EN 50491-11 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems 2015 CENELEC 0 (BACS) - Part 11: Smart Metering - Application Specifications - Simple External Consumer Display 1900 EN 62769-101- Field Device Integration (FDI) - Part 101-2: Profiles - Foundation Fieldbus HSE 2015 CENELEC 0 2 1901 EN 62047-17 Semiconductor devices - Micro-electromechanical devices - Part 17: Bulge test method for measuring mechanical 2015 CENELEC 0 properties of thin films 1902 EN 60384-8 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, 2015 CENELEC 0 Class 1 1903 EN 62386-201 Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 2015 CENELEC 0 0) 1904 EN 62875 Multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Printing specification of texture 2015 CENELEC 0 map for auditory presentation of printed texts 1905 EN 60384-23 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized 2015 CENELEC 0 polyethylene naphthalate film dielectric DC capacitors 1906 EN 50180-2 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for 2015 CENELEC 0 bushing components 1907 EN 50502 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection 2015 CENELEC 0 systems 1908 CLC/TS 50459- Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - 2015 CENELEC 0 1 Driver- Machine Interface - Part 1: General principles for the presentation of ERTMS/ETCS/GSM-R information 1909 EN 60601-2-1 Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron 2015 CENELEC 0 accelerators in the range 1 MeV to 50 MeV 1910 EN 61760-4 Surface mounting technology Part 4: Classification, packaging, labelling and handling of moisture sensitive devices - 2015 CENELEC 0 Incorporates Amendment A1: 2018 1911 EN 61338-1-5 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of 2015 CENELEC 0 conductivity at interface between conductor layer and dielectric substrate at microwave frequency 1912 EN 55014-2 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: 2015 CENELEC 0 Immunity - Product family standard 1913 EN 61753-031- Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized 2015 CENELEC 0 N non-wavelength-selective branching devices for Category U - Uncontrolled environment_أN and 2_أsinglemode 1 3 1914 EN 62047-15 Semiconductor devices - Micro-electromechanical devices - Part 15: Test method of bonding strength between PDMS and 2015 CENELEC 0 glass 1915 EN 62769-101- Field Device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1 2015 CENELEC 0 1 1916 EN 60079-5 Explosive atmospheres - Part 5: Equipment protection by powder filling "q" 2015 CENELEC 0 1917 EN 60317-40 Specifications for particular types of winding wires - Part 40: Glass-fibre braided resin or varnish-impregnated, bare or 2015 CENELEC 0 enamelled rectangular copper wire, temperature index 200 1918 EN 60794-1-21 Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods 2015 CENELEC 0 1919 EN 61675-2 Radionuclide imaging devices - Characteristics and conditions - Part 2: Gamma cameras for planar, wholebody, and 2015 CENELEC 0 SPECT imaging 1920 EN 60793-2-30 Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres 2015 CENELEC 0 1921 EN 61010-031 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements 2015 CENELEC 0 for hand-held probe assemblies for electrical measurement and test 1922 EN 62148-18 Fibre optic active components and devices - Package and interface standards - Part 18: 40-Gbit/s serial transmitter and 2015 CENELEC 0 receiver components for use with the LC connector interface 1923 CLC/TR 50174- Information technology - Cabling installation - Part 99-1: Remote powering 2015 CENELEC 0 99-1 1924 EN 60601-2-6 Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of 2015 CENELEC 0 microwave therapy equipment - Incorporates Amendment A1: 2016 1925 EN 62343-5-1 Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement 2015 CENELEC 0 1926 EN 62868 Organic light emitting diode (OLED) panels for general lighting - Safety requirements 2015 CENELEC 0 1927 EN 61347-1 Lamp controlgear - Part 1: General and safety requirements 2015 CENELEC 0 1928 EN 62756-1 Digital load side transmission lighting control - Part 1: Basic requirements 2015 CENELEC 0 1929 EN 61804-3 Function Blocks (FB) for process control and Electronic Device Description Language (EDDL) - Part 3: EDDL syntax and 2015 CENELEC 0 semantics 1930 EN 61300-3-35 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: 2015 CENELEC 0 Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers 1931 EN 61439-5 Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks 2015 CENELEC 0 1932 EN 60297-3- Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 2015 CENELEC 0 108 3- 108: Dimensions of R-type subracks and plug-in units 1933 CLC/TS 50568- Electricity metering data exchange - Part 4: Lower layer PLC profile using SMITP B-PSK modulation 2015 CENELEC 0 4 1934 EN 50156-1 Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation 2015 CENELEC 0 1935 EN 62769-103- Field Device Integration (FDI) - Part 103-4: Profiles - PROFINET 2015 CENELEC 0 4 1936 EN 60534-8-4 Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow 2015 CENELEC 0 1937 CLC/TS 52056- Electricity metering data exchange - The DLMS/COSEM suite - Part 8-7: AMC-SS PLC communication profile for 2015 CENELEC 0 8-7 neighbourhood networks 1938 EN 62852 Connectors for DC-application in photovoltaic systems - Safety requirements and tests 2015 CENELEC 0 1939 EN 60384-9 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, 2015 CENELEC 0 Class 2 1940 EN 60384-19 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized 2015 CENELEC 0 polyethyleneterephthalate film dielectric surface mount d.c. capacitors 1941 EN 62733 Programmable components in electronic lamp controlgear - General and safety requirements 2015 CENELEC 0 1942 EN 60071-5 Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations 2015 CENELEC 0 1943 EN 61000-4-30 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement 2015 CENELEC 0 methods 1944 EN 80601-2-60 Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental 2015 CENELEC 0 equipment 1945 EN 60968 Self-ballasted fluorescent lamps for general lighting services - Safety requirements 2015 CENELEC 0 1946 EN 61726 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the 2015 CENELEC 0 reverberation chamber method 1947 EN 60404-5 Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic 2015 CENELEC 0 properties 1948 EN 62823 Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing 2015 CENELEC 0 1949 CLC/TS 50625- Collection, logistics & treatment requirements for WEEE - Part 3-1: Specification for de-pollution - General 2015 CENELEC 0 3-1 1950 EN 62841-3-9 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-9: Particular 2015 CENELEC 0 requirements for transportable mitre saws - Incorporates Amendment A11: 2017 1951 EN 50411-3-5 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-5: Wall 2015 CENELEC 0 outlet 1952 EN 61375-2-5 Electronic railway equipment - Train communication network (TCN) - Part 2-5: Ethernet train backbone 2015 CENELEC 0 1953 EN 60335-2- Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and 2015 CENELEC 0 103 windows 1954 CLC/TS 50238- Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with track 2015 CENELEC 0 2 circuits - Incorporating corrigendum July 2016 1955 EN 62759-1 Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units 2015 CENELEC 0 1956 EN 60627 Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic anti-scatter grids 2015 CENELEC 0 1957 EN 60079-18 Explosive atmospheres Part 18: Equipment protection by encapsulation â__mâ__ - Incorporates Amendment A1: 2017 2015 CENELEC 0 1958 EN 60118-0 Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids 2015 CENELEC 0 1959 EN 62769-7 Field Device Integration (FDI) - Part 7: FDI Communication Devices 2015 CENELEC 0 1960 EN 62708 Document kinds for Electrical and Instrumentation Projects in the Process Industry 2015 CENELEC 0 1961 EN 62135-2 Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements 2015 CENELEC 0 1962 EN 61010-2- Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular 2015 CENELEC 0 040 requirements for sterilizers and washer-disinfectors used to treat medical materials 1963 EN 62889 Digital video interface - Gigabit video interface for multimedia systems 2015 CENELEC 0 1964 EN 62841-2-14 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular 2015 CENELEC 0 requirements for hand-held planers 1965 EN 62471-5 Photobiological safety of lamps and lamp systems - Part 5: Image projectors 2015 CENELEC 0 1966 EN 60092-507 Electrical installations in ships - Part 507 - Small vessels - Incorporating corrigendum August 2015 2015 CENELEC 0 1967 EN 61400-25-2 Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models 2015 CENELEC 0 1968 EN 50342-7 Lead acid starter batteries - Part 7: General requirements and methods of tests for motorcycle batteries 2015 CENELEC 0 1969 EN 60904-2 Photovoltaic devices - Part 2: Requirements for photovoltaic reference devices 2015 CENELEC 0 1970 EN 62817 Photovoltaic systems - Design qualification of solar trackers - Incorporates Amendment A1: 2017 2015 CENELEC 0 1971 EN 50342-1 Lead-acid starter batteries - Part 1: General requirements and methods of test 2015 CENELEC 0 1972 EN 61169-50 Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer 2015 CENELEC 0 conductors 4,11 mm with quick lock system - Characteristic impedance 50 Ohm (type QMA) 1973 EN 61290-1 Optical amplifiers - Test methods - Part 1: Power and gain parameters 2015 CENELEC 0 1974 EN 60794-3 Optical fibre cables - Part 3: Sectional specification - Outdoor cables 2015 CENELEC 0 1975 EN 60079-10-1 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres - Incorporating corrigendum 2015 CENELEC 0 November 2015 1976 EN 62676-3 Video surveillance systems for use in security applications - Part 3: Analog and digital video interfaces 2015 CENELEC 0 1977 EN 62005-9-1 Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical 2015 CENELEC 0 components 1978 EN 61804-5 Function blocks (FB) for process control and electronic device description language (EDDL) - Part 5: EDDL Builtin library 2015 CENELEC 0 1979 EN 61837-3 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead 2015 CENELEC 0 connections - Part 3: Metal enclosures 1980 EN 62241 Nuclear power plants - Main control room - Alarm functions and presentation 2015 CENELEC 0 1981 EN 140402-801 Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2 2015 CENELEC 0 1982 EN 45544-3 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic 2015 CENELEC 0 gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection 1983 EN 60601-2-36 Medical electrical equipment - Part 2-36: Particular requirements for the basic safety and essential performance of 2015 CENELEC 0 equipment for extracorporeally induced lithotripsy 1984 EN 60987 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based 2015 CENELEC 0 systems 1985 EN 60143-1 Series capacitors for power systems - Part 1: General 2015 CENELEC 0 1986 EN 50289-1-17 Communication cables - Specifications for test methods - Part 1- 17: Electrical test methods - Exogenous Crosstalk 2015 CENELEC 0 ExNEXT and ExFEXT 1987 EN 60695-1-11 Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment 2015 CENELEC 0 1988 EN 62275 Cable management systems - Cable ties for electrical installations 2015 CENELEC 0 1989 EN 61788-21 Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General 2015 CENELEC 0 characteristics and guidance 1990 EN 60601-2-68 Medical electrical equipment - Part 2-68: Particular requirements for the basic safety and essential performance of X-ray- 2015 CENELEC 0 based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam 1991 EN 60086-4 Primary batteries - Part 4: Safety of lithium batteries 2015 CENELEC 0 1992 EN 61340-5-3 Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements 2015 CENELEC 0 classification for packaging intended for electrostatic discharge sensitive devices 1993 EN 60598-2-21 Luminaires - Part 2-21: Particular requirements - Rope lights 2015 CENELEC 0 1994 HD 60364-8-1 Low-voltage electrical installations - Part 8-1: Energy efficiency 2015 CENELEC 0 1995 EN 50156-2 Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type 2015 CENELEC 0 approval of safety devices and subsystems 1996 EN 62541-11 OPC unified architecture - Part 11: Historical Access 2015 CENELEC 0 1997 EN 60115-2 Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors 2015 CENELEC 0 1998 EN 62670-2 Photovoltaic concentrators (CPV) - Performance testing - Part 2: Energy measurement 2015 CENELEC 0 1999 EN 61755-2-4 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-4: Connection 2015 CENELEC 0 parameters of non-dispersion shifted single-mode physically contacting fibres - Non-angled for reference connection applications 2000 EN 60695-11- Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods - Incorporating corrigendum January 2016 2015 CENELEC 0 20 2001 EN 62541-13 OPC unified architecture - Part 13: Aggregates 2015 CENELEC 0 2002 EN 60317-0-9 Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium 2015 CENELEC 0 wire 2003 EN 60335-2-6 Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, 2015 CENELEC 0 ovens and similar appliances 2004 EN 50440 Efficiency of domestic electrical storage water heaters and testing methods 2015 CENELEC 0 2005 EN 60601-2-11 Medical electrical equipment - Part 2-11: Particular requirements for the basic safety and essential performance of gamma 2015 CENELEC 0 beam therapy equipment 2006 EN 62740 Root cause analysis (RCA) 2015 CENELEC 0 2007 EN 61189-2- Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-721: Test 2015 CENELEC 0 721 methods for materials for interconnection structures - Measurement of relative permittivity and loss tangent for copper clad lamin 2008 EN 60455-2 Resin Based Reactive Compounds Used for Electrical Insulation - Part 2: Methods of Test 2015 CENELEC 0 2009 EN 62810 Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods 2015 CENELEC 0 2010 EN 62858 Lightning density based on lightning location systems (LLS) - General principles 2015 CENELEC 0 2011 EN 60598-2-20 Luminaires - Part 2-20: Particular requirements - Lighting chains 2015 CENELEC 0 2012 EN 62541-4 OPC unified architecture - Part 4: Services 2015 CENELEC 0 2013 EN 62620 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Secondary lithium cells and batteries for 2015 CENELEC 0 use in industrial applications 2014 EN 50090-4-3 Home and Building Electronic Systems (HBES) - Part 4-3: Media independent layers - Communication over IP (EN 13321- 2015 CENELEC 0 2) 2015 EN 60839-11-2 Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application guidelines 2015 CENELEC 0 2016 EN 62246-1 Reed switches - Part 1: Generic specification 2015 CENELEC 0 2017 EN 50598-2 Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 2: Energy 2014 CENELEC 0 efficiency indicators for power drive systems and motor starters - Incorporate Amendment A1: 2014; Remains Current 2018 EN 60214-1 Tap-changers - Part 1: Performance requirements and test methods 2014 CENELEC 0 2019 EN 61910-1 Medical electrical equipment - Radiation dose documentation - Part 1: Radiation dose structured reports for radiography 2014 CENELEC 0 and radioscopy 2020 EN 50599 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 2014 CENELEC 0 - Screened straight patch cords and straight work area cords for class D applications - Detail specification 2021 EN 62074-1 Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification 2014 CENELEC 0 2022 EN 61158-3-14 Industrial communication networks - Fieldbus specifications - Part 3-14: Data-link layer service definition - Type 14 2014 CENELEC 0 elements 2023 EN 50636-2-94 Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears 2014 CENELEC 0 2024 EN 60034-19 Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies 2014 CENELEC 0 2025 EN 62343-2 Dynamic modules - Part 2: Reliability qualification 2014 CENELEC 0 2026 EN 50526-2 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting 2014 CENELEC 0 devices 2027 EN 50491-6-1 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems 2014 CENELEC 0 (BACS) - Part 6-1: HBES installations - Installation and planning 2028 EN 61158-4-13 Industrial communication networks - Fieldbus specifications - Part 4-13: Data-link layer protocol specification - Type 13 2014 CENELEC 0 elements 2029 EN 61158-3-3 Industrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements 2014 CENELEC 0 2030 EN 55016-2-1 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of 2014 CENELEC 0 disturbances and immunity - Conducted disturbance measurements - Incorporates Amendment A1: 2017 2031 EN 61196-10-1 Coaxial communication cables - Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethylene 2014 CENELEC 0 (PTFE) dielectric 2032 EN 61557-15 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2014 CENELEC 0 or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and 2033 EN 62522 Calibration of tuneable laser sources 2014 CENELEC 0 2034 EN 62566 Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated 2014 CENELEC 0 circuits for systems performing category A functions 2035 EN 61290-3-3 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio 2014 CENELEC 0 2036 EN 50516-3-1 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - 2014 CENELEC 0 Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirem 2037 EN 61158-6-3 Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 2014 CENELEC 0 elements 2038 EN 50700 Information technology - Premises distribution access network (PDAN) cabling to support deployment of optical 2014 CENELEC 0 broadband networks 2039 EN 61158-1 Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 2014 CENELEC 0 61784 series 2040 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin 2014 CENELEC 0 214 sleeving, not flame retarded, thick and medium wall 2041 EN 50603 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 2014 CENELEC 0 - Screened straight patch cords and straight work area cords for class E applications - Detail specification 2042 EN 60317-55 Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire 2014 CENELEC 0 overcoated with polyamide, Class 180 2043 EN 60794-5-10 Optical fibre cables - Part 5â__10: Family specification - Outdoor microduct optical fibre cables, microducts and protected 2014 CENELEC 0 microducts for installation by blowing 2044 EN 62325-451- Framework for energy market communications - Part 451-3: Transmission capacity allocation business process (explicit or 2014 CENELEC 0 3 implicit auction) and contextual models for European market - Incorporates Amendment A1: 2017 2045 EN 60300-1 Dependability management - Part 1: Guidance for management and application 2014 CENELEC 0 2046 EN 60317-21 Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire 2014 CENELEC 0 overcoated with polyamide, class 155 2047 EN 61260-1 Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications 2014 CENELEC 0 2048 EN 61158-4-1 Industrial communication networks - Fieldbus specifications - Part 4-1: Data-link layer protocol specification - Type 1 2014 CENELEC 0 elements 2049 EN 61753-042- Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and 2014 CENELEC 0 2 plugreceptacle- style OTDR reflecting devices for category C - Controlled environments 2050 EN 61850-3 Communication networks and systems for power utility automation - Part 3: General requirements 2014 CENELEC 0 2051 EN 50600-2-3 Information technology - Data centre facilities and infrastructures - Part 2-3: Environmental control 2014 CENELEC 0 2052 EN 61534-21 Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting 2014 CENELEC 0 2053 EN 62056-3-1 Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with 2014 CENELEC 0 carrier signalling 2054 EN 50601 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 2014 CENELEC 0 - Screened straight patch cords and straight work area cords for class D applications - Detail specification 2055 EN 60794-1-20 Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions 2014 CENELEC 0 2056 EN 60794-1-24 Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods 2014 CENELEC 0 2057 EN 60335-2-31 Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking 2014 CENELEC 0 fume extractors 2058 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable, sleevings, 2014 CENELEC 0 284 for oil barrier applications 2059 EN 60317-52 Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tape wrapped round copper 2014 CENELEC 0 wire, temperature index 220 2060 EN 62676-1-2 Video surveillance systems for use in security applications - Part 1-2: System requirements Performance requirements for 2014 CENELEC 0 video transmission 2061 EN 61000-4-5 Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test - Incorporates 2014 CENELEC 0 Amendment A1: 2017 2062 CLC/TR 50624 Railway applications - Functional Interface Specification - Pantograph System 2014 CENELEC 0 2063 EN 61400-2 Wind turbines - Part 2: Small wind turbines 2014 CENELEC 0 2064 EN 60317-28 Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180 2014 CENELEC 0 2065 EN 60728-1-2 Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for 2014 CENELEC 0 signals delivered at the system outlet in Operation 2066 EN 60871-4 Shunt capacitors for AC power systems having a rated voltage above 1 000 V - Part 4: Internal fuses 2014 CENELEC 0 2067 EN 61158-6-14 Industrial communication networks - Fieldbus specifications - Part 6-14: Application layer protocol specification - Type 14 2014 CENELEC 0 elements 2068 EN 61851-24 Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an 2014 CENELEC 0 electric vehicle for control of d.c. charging 2069 EN 61158-5-23 Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 2014 CENELEC 0 elements 2070 EN 61753-071- Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized 2014 CENELEC 0 spatial switches for category C - Controlled environments 2 _أ and 2 2 _أ singlemode fibre optic 1 2 2071 EN 62379-5-2 Common control interface for networked digital audio and video products - Part 5-2: Transmission over networks - 2014 CENELEC 0 Signalling (TA4) 2072 EN 61243-3 Live working - Voltage detectors - Part 3: Two-pole low-voltage type 2014 CENELEC 0 2073 EN 61158-6-24 Industrial communication networks - Fieldbus specifications - Part 6-24: Application layer protocol specification - Type-24 2014 CENELEC 0 Elements 2074 EN 50434 Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers 2014 CENELEC 0 2075 CLC/TR 50083- Cable networks for television signals, sound signals and interactive services - Part 2-2: Interference issues for DVB-T 2014 CENELEC 0 2-2 reception in the presence of LTE base station signals 2076 EN 62149-3 Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters 2014 CENELEC 0 for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems 2077 EN 62196-3 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional 2014 CENELEC 0 compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers 2078 EN 61169-49 Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F connectors 2014 CENELEC 0 2079 EN 62626-1 Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of 2014 CENELEC 0 IEC 60947-3 to provide isolation during repair and maintenance work 2080 EN 62770 Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment 2014 CENELEC 0 2081 EN 61534-22 Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor 2014 CENELEC 0 installation 2082 EN 55016-1-2 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and 2014 CENELEC 0 immunity measuring apparatus - Coupling devices for conducted disturbance measurements - Incorporates Amendment A1: 2017 2083 EN 61158-3-13 Industrial communication networks - Fieldbus specifications - Part 3-13: Data-link layer service definition - Type 13 2014 CENELEC 0 elements 2084 EN 61158-3-2 Industrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements 2014 CENELEC 0 2085 EN 61158-4-12 Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 2014 CENELEC 0 elements 2086 CLC/TS 62603- Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications 2014 CENELEC 0 1 2087 EN 61010-2- Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular 2014 CENELEC 0 010 requirements for laboratory equipment for the heating of Materials 2088 EN 61300-2-35 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests - 2014 CENELEC 0 Cable nutation 2089 EN 62826 Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of 2014 CENELEC 0 measuring the performance 2090 EN 62288 Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on 2014 CENELEC 0 shipborne navigational displays - General requirements, methods of testing and required test results 2091 EN 62555 Ultrasonics - Power measurement - High intensity therapeutic ultrasound (HITU) transducers and systems 2014 CENELEC 0 2092 61000-4-19 Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, 2014 CENELEC 0 differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports 2093 EN 62325-451- Framework for energy market communications - Part 451-2: Scheduling business process and contextual model for CIM 2014 CENELEC 0 2 European market 2094 EN 62929 Cleaning robots for household use - Dry cleaning: Methods of measuring performance 2014 CENELEC 0 2095 EN 61158-6-2 Industrial communication networks - Fieldbus specifications - Part 6-2: Application layer protocol specification - Type 2 2014 CENELEC 0 elements 2096 EN 61347-2-13 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules - 2014 CENELEC 0 Incorporates Amendment A1: 2017 2097 EN 61754-30 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 30: Type CLIK 2014 CENELEC 0 connector series 2098 EN 50602 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173-4 2014 CENELEC 0 - Unscreened straight patch cords and straight work area cords for class E applications - Detail specification 2099 EN 62386-101 Digital addressable lighting interface - Part 101: General requirements - System components 2014 CENELEC 0 2100 EN 60721-2-9 Classification of environmental conditions - Part 2-9: Environmental conditions appearing in nature - Measured shock and 2014 CENELEC 0 vibration data - Storage, transportation and in-use 2101 EN 61970-453 Energy management system application program interface (EMS-API) - Part 453: Diagram layout profile 2014 CENELEC 0 2102 EN 62676-2-2 Video surveillance systems for use in security applications - Part 2-2: Video transmission protocols - IP interoperability 2014 CENELEC 0 implementation based on HTTP and REST services 2103 EN 60793-1-51 Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests 2014 CENELEC 0 2104 EN 60728-1-1 Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home 2014 CENELEC 0 networks 2105 EN 60876-1 Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification 2014 CENELEC 0 2106 EN 61883-6 Consumer audio/video equipment - Digital interface - Part 6: Audio and music data transmission protocol 2014 CENELEC 0 2107 EN 61753-031- Fibre optic interconnecting devices and passive components - Performance standard - Part 031-6: Non-connectorized 2014 CENELEC 0 6 singlemode 1xN and 2xN non-wavelengthselective branching devices for Category O - Uncontrolled environment 2108 EN 61280-2-12 Fibre optic communication subsystem test procedures - Part 2-12: Digital systems - Measuring eye diagrams and Q-factor 2014 CENELEC 0 using a software triggering technique for transmission signal quality assessment 2109 EN 61190-1-2 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in 2014 CENELEC 0 electronics assembly 2110 EN 61158-5-24 Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type-24 2014 CENELEC 0 elements 2111 EN 62608-1 Multimedia home network configuration - Basic Reference model - Part 1: System model 2014 CENELEC 0 2112 EN 62351-3 Power systems management and associated information exchange - Data and communications security - Part 3: 2014 CENELEC 0 Communication network and system security - Profiles including TCP/IP - Incorporates Amendment A1: 2018 2113 EN 62386-102 Digital addressable lighting interface - Part 102: General requirements - Control gear 2014 CENELEC 0 2114 EN 60793-1-52 Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests 2014 CENELEC 0 2115 EN 60079-2 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" 2014 CENELEC 0 2116 EN 60947-4-3 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and 2014 CENELEC 0 contactors for non-motor loads 2117 EN 61158-6-20 Industrial communication networks - Fieldbus specifications - Part 6-20: Application layer protocol specification - Type 20 2014 CENELEC 0 elements 2118 EN 62290-1 Railway applications - Urban guided transport management and command/control systems - Part 1: System principles and 2014 CENELEC 0 fundamental concepts 2119 EN 60601-2-27 Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of 2014 CENELEC 0 electrocardiographic monitoring equipment 2120 EN 61076-2- Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for 2014 CENELEC 0 104 circular connectors with M8 screw-locking or snap-locking 2121 EN 60317-53 Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular 2014 CENELEC 0 copper wire, temperature index 220 2122 EN 62321-5 Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and 2014 CENELEC 0 electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS 2123 EN 60034-18- Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating 2014 CENELEC 0 41 electrical machines fed from voltage converters - Qualification and quality control tests 2124 EN 61300-2-43 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - 2014 CENELEC 0 Screen testing of return loss of single-mode PC optical fibre connectors 2125 EN 61300-3-52 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-52: 2014 CENELEC 0 Examinations and measurements - Guide hole and alignment pin deformation constant, CD for 8 degree angled PC rectangular ferrule, single mode f 2126 EN 61158-3-19 Industrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19 2014 CENELEC 0 elements 2127 EN 60299 Household electric blankets - Methods for measuring performance 2014 CENELEC 0 2128 EN 61400-23 Wind turbines - Part 23: Full-scale structural testing of rotor blades 2014 CENELEC 0 2129 EN 61158-3-4 Industrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements 2014 CENELEC 0 2130 EN 61753-041- Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized 2014 CENELEC 0 2 singlemode OTDR reflecting device for category C - Controlled environment 2131 EN 61158-4-14 Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer protocol specification - Type 14 2014 CENELEC 0 elements 2132 EN 61300-3-14 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: 2014 CENELEC 0 Examinations and measurements - Error and repeatability of the attenuation settings of a variable optical attenuator 2133 EN 50299-1 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 2014 CENELEC 0 72,5 kV to 550 kV - Part 1: Fluid-filled cable terminations 2134 EN 60974-3 Arc welding equipment - Part 3: Arc striking and stabilizing devices 2014 CENELEC 0 2135 EN 50343 Railway applications - Rolling stock - Rules for installation of cabling - Incorporates Amendment A1: 2017 2014 CENELEC 0 2136 EN 61577-3 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific 2014 CENELEC 0 requirements for radon decay product measuring instruments 2137 EN 62196-1 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General 2014 CENELEC 0 requirements 2138 EN 61158-6-4 Industrial communication networks - Fieldbus specifications - Part 6-4: Application layer protocol specification - Type 4 2014 CENELEC 0 elements 2139 EN 61158-5-22 Industrial communication networks - Fieldbus specifications - Part 5-22: Application layer service definition - Type 22 2014 CENELEC 0 elements 2140 EN 61966-12-2 Multimedia systems and equipment - Colour measurement and management - Part 12-2: Simple metadata format for 2014 CENELEC 0 identification of colour gamut 2141 EN 60793-1-53 Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests 2014 CENELEC 0 2142 EN 60255-127 Measuring relays and protection equipment - Part 127: Functional requirements for over/under voltage protection 2014 CENELEC 0 2143 EN 61786-1 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of 2014 CENELEC 0 human beings - Part 1: Requirements for measuring instruments 2144 EN 60601-2-34 Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive 2014 CENELEC 0 blood pressure monitoring equipment 2145 EN 62149-9 Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical 2014 CENELEC 0 amplifier transceivers 2146 EN 62485-3 Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries 2014 CENELEC 0 2147 EN 62321-3-1 Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total 2014 CENELEC 0 chromium and total bromine by X-ray fluorescence spectrometry 2148 EN 61784-1 Industrial communication networks - Profiles - Part 1: Fieldbus profiles 2014 CENELEC 0 2149 EN 62290-2 Railway applications - Urban guided transport management and command/control systems - Part 2: Functional 2014 CENELEC 0 requirements specification 2150 EN 50125-1 Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment 2014 CENELEC 0 2151 EN 61858-1 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - 2014 CENELEC 0 Part 1: Wire-wound winding EIS 2152 CLC/TS 50083- Cable networks for television signals, sound signals and interactive services - Part 3-3: Active wideband equipment for 2014 CENELEC 0 3-3 cable networks - Methods of measurement of the maximum operating output level in the return path 2153 EN 60754-1 Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content 2014 CENELEC 0 2154 EN 60320-3 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges 2014 CENELEC 0 2155 EN 60819-3-4 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper 2014 CENELEC 0 containing not more than 50 % of mica particles 2156 EN 62198 Managing risk in projects - Application guidelines 2014 CENELEC 0 2157 EN 62271-211 High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated 2014 CENELEC 0 metal-enclosed switchgear for rated voltages above 52 kV 2158 EN 61158-6-23 Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 2014 CENELEC 0 elements 2159 EN 61158-4-19 Industrial communication networks - Fieldbus specifications - Part 4-19: Data-link layer protocol specification - Type 19 2014 CENELEC 0 elements 2160 EN 60358-3 Coupling capacitors and capacitor dividers - Part 3: AC or DC coupling capacitors for harmonic-filters applications 2014 CENELEC 0 2161 EN 61300-3-29 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: 2014 CENELEC 0 Examinations and measurements - Spectral transfer characteristics of DWDM devices 2162 EN 61158-3-20 Industrial communication networks - Fieldbus specifications - Part 3-20: Data-link layer service definition - Type 20 2014 CENELEC 0 elements 2163 EN 61753-031- Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorized 2014 CENELEC 0 N non-wavelength-selective branching devices for Category C - Controlled environment_أN and 2_أsinglemode 1 2 2164 EN 61255 Household electric heating pads - Methods for measuring performance 2014 CENELEC 0 2165 EN 61158-3-22 Industrial communication networks - Fieldbus specifications - Part 3-22: Data-link layer service definition - Type 22 2014 CENELEC 0 elements 2166 CLC/TS 50131- Alarm systems - Intrusion and hold-up systems - Part 9: Alarm verification - Methods and principles 2014 CENELEC 0 9 2167 EN 50636-2- Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated 2014 CENELEC 0 100 garden blowers, vacuums and blower vacuums 2168 EN 60317-38 Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide- 2014 CENELEC 0 imide, enamelled round copper wire, class 200, with a bonding layer 2169 EN 50299-2 Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 2014 CENELEC 0 72,5 kV to 550 kV - Part 2: Dry-type cable terminations 2170 EN 60695-10-2 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method 2014 CENELEC 0 2171 EN 61788-19 Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn 2014 CENELEC 0 composite superconductors 2172 EN 61978-1 Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 2014 CENELEC 0 1: Generic specification 2173 EN 60598-2-22 Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting - Incorporating corrigendum 2014 CENELEC 0 September 2016 2174 EN 60825-1 Safety of laser products - Part 1: Equipment classification and requirements 2014 CENELEC 0 2175 EN 60695-1-40 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids 2014 CENELEC 0 2176 EN 60034-2-1 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding 2014 CENELEC 0 machines for traction vehicles) 2177 EN 62271-202 High-voltage switchgear and controlgear - Part 202: Highvoltage/ low-voltage prefabricated substation - Incorporating 2014 CENELEC 0 corrigendum September 2014 2178 EN 60079-1 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" 2014 CENELEC 0 2179 EN 60695-2-11 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end- 2014 CENELEC 0 products 2180 EN 61158-6-5 Industrial communication networks - Fieldbus specifications - Part 6-5: Application layer protocol specification - Type 5 2014 CENELEC 0 elements 2181 EN 61753-1-3 Fibre optic interconnecting devices and passive components - Performance standard - Part 1-3: General and guidance for 2014 CENELEC 0 single-mode fibre optic connector and cable assembly for industrial environment, Category I 2182 EN 62386-101 Digital addressable lighting interface - Part 101: General requirements - System components - Incorporates Amendment: 2014 CENELEC 0 2018 2183 EN 62481-4 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 4: DRM interoperability 2014 CENELEC 0 solutions (TA9) 2184 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 285: Heat-shrinkable polyolefin 2014 CENELEC 0 285 sleeving, for medium voltage joint insulation 2185 EN 60749-42 Semiconductor devices - Mechanical and climatic test methods - Part 42: Temperature and humidity storage 2014 CENELEC 0 2186 EN 62489-2 Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 2: Methods of calculating and 2014 CENELEC 0 measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure 2187 EN 61280-4-2 Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical 2014 CENELEC 0 return loss measurement 2188 EN 60661 Methods for measuring the performance of electric household coffee makers 2014 CENELEC 0 2189 EN 61753-081- Fibre optic interconnecting devices and passive components - Performance standard - Part 081-2: Non-connectorized 2014 CENELEC 0 2 single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments 2190 EN 62065 Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and 2014 CENELEC 0 performance requirements, methods of testing and required test results 2191 EN 61558-2-10 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests 2014 CENELEC 0 for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V 2192 EN 62137-4 Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount 2014 CENELEC 0 devices - Incorporating corrigendum February 2015 2193 EN 60068-1 Environmental testing - Part 1: General and guidance 2014 CENELEC 0 2194 EN 61158-4-4 Industrial communication networks - Fieldbus specifications - Part 4-4: Data-link layer protocol specification - Type 4 2014 CENELEC 0 elements 2195 EN 62675 Secondary cells and batteries containing alkaline or other nonacid electrolytes - Sealed nickel-metal hydride prismatic 2014 CENELEC 0 rechargeable single cells 2196 EN 60870-6- Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T 2014 CENELEC 0 503 recommendations - TASE.2 Services and protocol 2197 EN 60728-10 Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths 2014 CENELEC 0 2198 EN 50585 Communications protocol to transport satellite delivered signals over IP networks 2014 CENELEC 0 2199 EN 60754-2 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) 2014 CENELEC 0 and conductivity 2200 EN 61869-4 Instrument transformers - Part 4: Additional requirements for combined transformers 2014 CENELEC 0 2201 EN 60695-9-2 Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods 2014 CENELEC 0 2202 EN 50618 Electric cables for photovoltaic systems (BT(DE/NOT)258) 2014 CENELEC 0 2203 EN 61158-5-2 Industrial communication networks - Fieldbus specifications - Part 5-2: Application layer service definition - Type 2 2014 CENELEC 0 elements 2204 EN 60079-29-3 Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems 2014 CENELEC 0 2205 EN 60127-2 Miniature fuses - Part 2: Cartridge fuse-links 2014 CENELEC 0 2206 EN 62841-3-6 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety Part 3-6: Particular 2014 CENELEC 0 requirements for transportable diamond drills with liquid system - Incorporates Amendment A11: 2017 2207 EN 62841-3-1 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular 2014 CENELEC 0 requirements for transportable table saws - Incorporates Amendment A11: 2017 2208 EN 61158-4-20 Industrial communication networks - Fieldbus specifications - Part 4-20: Data-link layer protocol specification - Type 20 2014 CENELEC 0 elements 2209 EN 60079-14 Explosive atmospheres - Part 14: Electrical installations design, selection and erection 2014 CENELEC 0 2210 EN 60904-8 Photovoltaic devices - Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device 2014 CENELEC 0 2211 EN 61287-1 Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods 2014 CENELEC 0 2212 EN 60793-1-20 Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry - Incorporating corrigendum March 2014 CENELEC 0 2016 2213 EN 60317-23 Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 2014 CENELEC 0 180 2214 EN 50565-2 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 2: Specific guidance 2014 CENELEC 0 related to EN 50525 cable types 2215 EN 62607-3-1 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency 2014 CENELEC 0 2216 EN 60974-10 Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements - Incorporates Amendment: 2015 2014 CENELEC 0 2217 EN 62670-1 Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard conditions 2014 CENELEC 0 2218 EN 62504 General lighting Light emitting diode (LED) products and related equipment Terms and definitions - Incorporates 2014 CENELEC 0 Amendment A1: 2018 2219 EN 50290-4-1 Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety 2014 CENELEC 0 aspects 2220 EN 60728-14 Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using 2014 CENELEC 0 RFoG technology 2221 EN 60099-4 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems 2014 CENELEC 0 2222 EN 60871-1 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General 2014 CENELEC 0 2223 EN 61158-6-9 Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 2014 CENELEC 0 elements 2224 EN 61784-2 Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on 2014 CENELEC 0 ISO/IEC 8802-3 2225 EN 60255-121 Measuring relays and protection equipment - Part 121: Functional requirements for distance protection 2014 CENELEC 0 2226 EN 62841-2-2 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular 2014 CENELEC 0 requirements for hand-held screwdrivers and impact wrenches 2227 EN 62751-2 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular 2014 CENELEC 0 multilevel converters 2228 EN 61675-1 Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs 2014 CENELEC 0 2229 EN 62379-5-1 Common control interface for networked digital audio and video products - Part 5-1: Transmission over networks - General 2014 CENELEC 0 2230 EN 60068-2-75 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests 2014 CENELEC 0 2231 EN 61158-2 Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition 2014 CENELEC 0 2232 EN 61300-3-47 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47: 2014 CENELEC 0 Examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry 2233 EN 50625-1 Collection, logistics & Treatment requirements for WEEE - Part 1: General treatment requirements 2014 CENELEC 0 2234 EN 62707-1 LED-binning - Part 1: General requirements and white colour grid 2014 CENELEC 0 2235 GUIDE 1 Survey of Resolutions of the CENELEC General Assembly 2014 CENELEC 0 2236 EN 61331-1 Protective devices against diagnostic medical X-radiation - Part 1: Determination of attenuation properties of materials 2014 CENELEC 0 2237 EN 61754-7-1 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO 2014 CENELEC 0 connector family - One fibre row 2238 EN 60243-2 Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage 2014 CENELEC 0 2239 EN 61158-5-13 Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 2014 CENELEC 0 elements 2240 EN 60794-4-10 Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines 2014 CENELEC 0 2241 EN 62680-4 Universal serial bus interfaces for data and power - Part 4: Universal Serial Bus Cables and Connectors Class Document, 2014 CENELEC 0 Revision 2.0 2242 EN 61290-10-5 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure 2014 CENELEC 0 2243 EN 61158-4-22 Industrial communication networks - Fieldbus specifications - Part 4-22: Data-link layer protocol specification - Type 22 2014 CENELEC 0 elements 2244 EN 62149-8 Fibre optic active components and devices - Performance standards - Part 8: Seeded reflective semiconductor optical 2014 CENELEC 0 amplifier devices 2245 EN 60721-2-1 Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and 2014 CENELEC 0 Humidity 2246 EN 62481-1 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 1: Architecture and 2014 CENELEC 0 protocols 2247 EN 60317-35 Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 2014 CENELEC 0 155, with a bonding layer 2248 CLC/TS 50574- Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbons 2014 CENELEC 0 2 or volatile hydrocarbons - Part 2: specification for de-pollution 2249 EN 61482-1-2 Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: 2014 CENELEC 0 Determination of arc protection class of material and clothing by using a constrained and directed arc (box test) 2250 EN 61158-5-3 Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 2014 CENELEC 0 elements 2251 EN 60317-0-1 Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire 2014 CENELEC 0 2252 EN 62841-2-4 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular 2014 CENELEC 0 requirements for hand-held sanders and polishers other than disc type 2253 EN 62343-3-3 Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches 2014 CENELEC 0 2254 EN 50290-4-2 Communication cables - Part 4-2: General considerations for the use of cables - Guide to use 2014 CENELEC 0 2255 EN 62761 Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) 2014 CENELEC 0 devices in radio frequency (RF) 2256 EN 61158-5-10 Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 2014 CENELEC 0 elements 2257 EN 62148-15 Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface 2014 CENELEC 0 emitting laser packages 2258 EN 60770-3 Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent 2014 CENELEC 0 transmitters - Remains Current 2259 EN 61158-6-10 Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 2014 CENELEC 0 elements 2260 EN 62146-1 Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General - Incorporates Amendment A1: 2014 CENELEC 0 2016 2261 EN 60317-0-2 Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire 2014 CENELEC 0 2262 CLC/TR 50623 Railway applications - Functional Interface Specification - Door System 2014 CENELEC 0 2263 EN 62321-3-2 Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and 2014 CENELEC 0 electronics by Combustion - Ion Chromatography 2264 EN 61158-4-24 Industrial communication networks - Fieldbus specifications - Part 4-24: Data-link layer protocol specification - Type 24 2014 CENELEC 0 elements 2265 EN 60870-6- Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T 2014 CENELEC 0 802 recommendations - TASE.2 Object models 2266 EN 62747 Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems 2014 CENELEC 0 2267 EN 61169-45 Radio-frequency connectors -Part 45: Sectional specification for series SQMA series quick lock RF coaxial connectors 2014 CENELEC 0 2268 EN 62353 Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment 2014 CENELEC 0 2269 EN 61158-3-24 Industrial communication networks - Fieldbus specifications - Part 3-24: Data-link layer service definition - Type-24 2014 CENELEC 0 elements 2270 EN 61158-4-2 Industrial communication networks - Fieldbus specifications -Part 4-2: Data-link layer protocol specification - Type 2 2014 CENELEC 0 elements 2271 EN 61158-3-1 Industrial communication networks - Fieldbus specifications - Part 3-1: Data-link layer service definition - Type 1 elements 2014 CENELEC 0 2272 EN 61375-3-4 Electronic railway equipment - Train communication network (TCN) - Part 3-4: Ethernet Consist Network (ECN) - 2014 CENELEC 0 Incorporates Amendment A1: 2017 2273 EN 62676-1-1 Video surveillance systems for use in security applications - Part 1-1: System requirements - General 2014 CENELEC 0 2274 EN 50131-10 Alarm systems - Intrusion and hold-up systems - Part 10: Application specific requirements for Supervised Premises 2014 CENELEC 0 Transceiver (SPT) 2275 EN 60079-17 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance 2014 CENELEC 0 2276 EN 62035 Discharge lamps (excluding fluorescent lamps) - Safety specifications 2014 CENELEC 0 2277 EN 61331-2 Protective devices against diagnostic medical X-radiation - Part 2: Translucent protective plates 2014 CENELEC 0 2278 EN 61577-4 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the 2014 CENELEC 0 production of reference atmospheres containing radon isotopes and their decay products (STAR) 2279 EN 60034-30-1 Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) 2014 CENELEC 0 2280 EN 60191-4 Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package 2014 CENELEC 0 outlines for semiconductor device packages - Incorporates Amendment A1: 2018 2281 EN 61158-5-5 Industrial communication networks - Fieldbus specifications - Part 5-5: Application layer service definition - Type 5 2014 CENELEC 0 elements 2282 EN 50636-2-92 Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains- 2014 CENELEC 0 operated lawn scarifiers and aerators 2283 EN 60317-27 Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire 2014 CENELEC 0 2284 EN 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements - Incorporates 2014 CENELEC 0 Amendment A11: 2017 2285 EN 62047-21 Semiconductor devices - Micro-electromechanical devices - Part 21: Test method for Poissons ratio of thin film MEMS 2014 CENELEC 0 materials s impulse tests 2014 CENELEC 0_خ EN 60243-3 Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 2286 2287 EN 61158-5-14 Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 2014 CENELEC 0 elements 2288 EN 50625-2-1 Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatment requirements for lamps 2014 CENELEC 0 2289 EN 61076-2- Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for 2014 CENELEC 0 screw-locking, for data transmission frequencies up to 500 MHz 1 _أ connectors with M 12 109 2290 EN 61858-2 Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - 2014 CENELEC 0 Part 2: Form-wound EIS 2291 EN 60127-6 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links 2014 CENELEC 0 2292 EN 60721-2-3 Classification of environmental conditions - Part 2-3: Environmental conditions appearing in nature - Air pressure 2014 CENELEC 0 2293 EN 60507 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems 2014 CENELEC 0 2294 EN 62386-103 Digital addressable lighting interface - Part 103: General requirements - Control devices 2014 CENELEC 0 2295 EN 61481-1 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. 2014 CENELEC 0 2296 EN 62149-2 Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface 2014 CENELEC 0 emitting laser devices 2297 EN 61158-6-12 Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 2014 CENELEC 0 elements 2298 EN 62798 Industrial electroheating equipment - Test methods for infrared emitters - Incorporating corrigendum November 2014 2014 CENELEC 0 2299 EN 60268-4 Sound system equipment - Part 4: Microphones 2014 CENELEC 0 2300 EN 62271-201 High-voltage switchgear and controlgear - Part 201: AC solidinsulation enclosed switchgear and controlgear for rated 2014 CENELEC 0 voltages above 1 kV and up to and including 52 kV 2301 EN 61851-23 Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station 2014 CENELEC 0 2302 EN 61158-5-19 Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 2014 CENELEC 0 elements 2303 EN 50600-2-2 Information technology - Data centre facilities and infrastructures - Part 2-2: Power distribution 2014 CENELEC 0 2304 EN 50436-1 Alcohol interlocks - Test methods and performance requirements - Part 1: Instruments for drink-driving-offender programs 2014 CENELEC 0 2305 EN 50575 Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire 2014 CENELEC 0 requirements - Incorporates Amendment A1: 2016 2306 EN 61158-5-4 Industrial communication networks - Fieldbus specifications - Part 5-4: Application layer service definition - Type 4 2014 CENELEC 0 elements 2307 EN 62751-1 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General 2014 CENELEC 0 requirements - Incorporates Amendment A1: 2018 2308 EN 60870-6- Telecontrol equipment and systems - Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T 2014 CENELEC 0 702 recommendations - Functional profile for providing the TASE.2 application service in end systems 2309 CLC/TR 50619 Guidance on how to conduct Round Robin Tests 2014 CENELEC 0 2310 EN 61158-6-19 Industrial communication networks - Fieldbus specifications - Part 6-19: Application layer protocol specification - Type 19 2014 CENELEC 0 elements 2311 EN 50436-2 Alcohol interlocks - Test methods and performance requirements - Part 2: Instruments having a mouthpiece and measuring 2014 CENELEC 0 breath alcohol for general preventive use - Incorporates Amendment A1: 2015 2312 EN 62047-20 Semiconductor devices - Micro-electromechanical devices - Part 20: Gyroscopes 2014 CENELEC 0 2313 EN 61839 Nuclear power plants - Design of control rooms - Functional analysis and assignment 2014 CENELEC 0 2314 EN 60794-2-20 Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables 2014 CENELEC 0 2315 EN 62481-2 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 2: DLNA media formats 2014 CENELEC 0 2316 EN 61968-9 Application integration at electric utilities - System interfaces for distribution management - Part 9: Interfaces for meter 2014 CENELEC 0 reading and control 2317 EN 50636-2-91 Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held 2014 CENELEC 0 lawn trimmers and lawn edge trimmers 2318 EN 62676-2-1 Video surveillance systems for use in security applications - Part 2-1: Video transmission protocols - General requirements 2014 CENELEC 0 2319 EN 62148-17 Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver 2014 CENELEC 0 components with dual coaxial RF connectors 2320 EN 61158-4-3 Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 2014 CENELEC 0 elements 2321 EN 61331-3 Protective devices against diagnostic medical X-radiation - Part 3: Protective clothing, eyewear and protective patient 2014 CENELEC 0 shields 2322 EN 61158-5-9 Industrial communication networks - Fieldbus specifications - Part 5-9: Application layer service definition - Type 9 2014 CENELEC 0 elements 2323 EN 60065 Audio, video and similar electronic apparatus - Safety requirements - Incorporates Amendment A11: 2017; Remains 2014 CENELEC 0 Current 2324 EN 61158-3-12 Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 2014 CENELEC 0 elements 2325 EN 61000-3-2 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 2014 CENELEC 0 â_¤ 16 A per phase) 2326 EN 50153 Railway applications - Rolling stock - Protective provisions relating to electrical hazards - Incorporates Amendment A1: 2014 CENELEC 0 2017 2327 EN 60317-20 Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 2014 CENELEC 0 155 2328 EN 60317-36 Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 2014 CENELEC 0 180, with a bonding layer 2329 EN 62047-22 Semiconductor devices - Micro-electromechanical devices - Part 22: Electromechanical tensile test method for conductive 2014 CENELEC 0 thin films on flexible substrates 2330 EN 60831-2 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2: 2014 CENELEC 0 Ageing test, self-healing test and destruction test 2331 CLC/TS 50560 Interoperability framework requirement specification 2014 CENELEC 0 2332 EN 61753-053- Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized 2014 CENELEC 0 2 singlemode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments 2333 EN 61481-2 Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. 2014 CENELEC 0 2334 EN 62321-4 Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by 2014 CENELEC 0 CV-AAS, CV-AFS, ICP-OES and ICP-MS - Incorporates Amendment A1: 2017 2335 EN 62321-2 Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample 2014 CENELEC 0 preparation 2336 EN 60794-5-20 Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts 2014 CENELEC 0 for installation by blowing 2337 EN 60728-1 Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths 2014 CENELEC 0 2338 EN 62282-4- Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power 2014 CENELEC 0 101 units (APU) - Safety of electrically powered industrial trucks 2339 EN 61158-6-13 Industrial communication networks - Fieldbus specifications - Part 6-13: Application layer protocol specification - Type 13 2014 CENELEC 0 elements 2340 EN 61158-5-20 Industrial communication networks - Fieldbus specifications - Part 5-20: Application layer service definition - Type 20 2014 CENELEC 0 elements 2341 EN 62841-2-5 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular 2014 CENELEC 0 requirements for hand-held circular saws 2342 EN 60794-2-51 Optical fibre cables - Part 2-51: Indoor cables - Detail specification for simplex and duplex cables for use in cords for 2014 CENELEC 0 controlled environment 2343 EN 50600-2-1 Information technology - Data centre facilities and infrastructures - Part 2-1: Building construction 2014 CENELEC 0 2344 EN 60079-31 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" 2014 CENELEC 0 2345 EN 62116 Utility-interconnected photovoltaic inverters - Test procedure of islanding prevention measures 2014 CENELEC 0 2346 EN 61158-6-22 Industrial communication networks - Fieldbus specifications - Part 6-22: Application layer protocol specification - Type 22 2014 CENELEC 0 elements 2347 CLC/TR 50609 Technical Guidelines for Radial HVDC Networks 2014 CENELEC 0 2348 CLC/TR 50610 Railway applications - Train Modes functional interface specification 2014 CENELEC 0 2349 EN 60099-9 Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations 2014 CENELEC 0 2350 EN 61300-3-51 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-51: 2014 CENELEC 0 Examinations and measurements - Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors 2351 EN 61587-5 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, 2014 CENELEC 0 subracks and plug-in units 2352 EN 50407-3 Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser 2014 CENELEC 0 cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s ove 2353 EN 61158-5-12 Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 2014 CENELEC 0 elements 2354 EN 62021-3 Insulating liquids - Determination of acidity - Part 3: Test methods for non mineral insulating oils 2014 CENELEC 0 2355 EN 60831-1 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: 2014 CENELEC 0 General - Performance, testing and rating - Safety requirements - Guide for installation and operation 2356 EN 62676-2-3 Video surveillance systems for use in security applications - Part 2-3: Video transmission protocols - IP interoperability 2014 CENELEC 0 implementation based on Web services 2357 EN 61158-4-11 Industrial communication networks - Fieldbus specifications - Part 4-11: Data-link layer protocol specification - Type 11 2014 CENELEC 0 elements 2358 EN 61784-5-17 Industrial communication networks - Profiles - Part 5-17: Installation of fieldbuses - Installation profiles for CPF 17 2013 CENELEC 0 2359 EN 62047-18 Semiconductor devices - Micro-electromechanical devices - Part 18: Bend testing methods of thin film materials 2013 CENELEC 0 2360 EN 62047-11 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal 2013 CENELEC 0 expansion of free-standing materials for micro-electromechanical systems 2361 EN 62680-3 Universal serial bus interfaces for data and power - Part 3: USB battery charging specification, Revision 1.2 2013 CENELEC 0 2362 CLC/TR 50117- Coaxial cables used in cabled distribution networks - Part 8: Repair and substitute of damaged buried cables 2013 CENELEC 0 8 2363 EN 62673 Methodology for communication network dependability assessment and assurance 2013 CENELEC 0 2364 EN 61558-2-26 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests 2013 CENELEC 0 for transformers and power supply units for saving energy and other purposes 2365 EN 61326-2-6 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - 2013 CENELEC 0 In vitro diagnostic (IVD) medical equipment 2366 EN 61753-088- Fibre optic interconnecting devices and passive components - Performance standard - Part 088-2: Non-connectorized 2013 CENELEC 0 2 single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments 2367 EN 61191-1 Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies 2013 CENELEC 0 using surface mount and related assembly technologies 2368 EN 61472 Live working - Minimum approach distances for a.c systems in the voltage range 72,5 kV to 800 kV - A method of 2013 CENELEC 0 calculation 2369 EN 61326-2-2 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - 2013 CENELEC 0 Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in lo 2370 EN 61788-12 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of 2013 CENELEC 0 Nb3Sn composite superconducting wires 2371 EN 60848 GRAFCET specification language for sequential function charts 2013 CENELEC 0 2372 EN 62598 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges 2013 CENELEC 0 2373 EN 50332-1 Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure 2013 CENELEC 0 level measurement methodology - Part 1: General method for "one package equipment" 2374 EN 62629-22-1 3D display devices - Part 22-1: Measuring methods for autostereoscopic displays - Optical 2013 CENELEC 0 2375 HD 60269-2 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial 2013 CENELEC 0 application) - Examples of standardized systems of fuses A to K 2376 EN 60216-1 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results 2013 CENELEC 0 2377 EN 60974-7 Arc welding equipment - Part 7:Torches 2013 CENELEC 0 2378 EN 60974-5 Arc welding equipment - Part 5: Wire feeders 2013 CENELEC 0 2379 EN 50288-4-2 Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification 2013 CENELEC 0 for screened cables characterised up to 600 MHz - Work area and patch cord cables 2380 EN 62680-1 Universal serial bus interfaces for data and power - Part 1: Universal serial bus specification, revision 2.0 2013 CENELEC 0 2381 EN 60695-9-1 Fire hazard testing - Part 9-1: Surface spread of flame - General guidance 2013 CENELEC 0 2382 EN 61850-10 Communication networks and systems for power utility automation - Part 10: Conformance testing 2013 CENELEC 0 2383 EN 61753-051- Fibre optic interconnecting devices and passive components - Performance standard - Part 051-3: Single-mode fibre, plug 2013 CENELEC 0 3 style fixed attenuators for category U - Uncontrolled environment 2384 EN 62068 Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage 2013 CENELEC 0 impulses 2385 EN 61784-5-16 Industrial communication networks - Profiles - Part 5-16: Installation of fieldbuses - Installation profiles for CPF 16 2013 CENELEC 0 2386 EN 61918 Industrial communication networks - Installation of communication networks in industrial premises - Incorporating 2013 CENELEC 0 corrigendum May 2014 2387 EN 61169-44 Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors 2013 CENELEC 0 2388 EN 50050-2 Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable 2013 CENELEC 0 coating powder 2389 EN 62215-3 Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method 2013 CENELEC 0 2390 EN 60076-14 Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials 2013 CENELEC 0 2391 EN 60444-6 Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD) 2013 CENELEC 0 2392 EN 50355 Railway applications - Railway rolling stock cables having special fire performance - Guide to use 2013 CENELEC 0 2393 EN 61360-2 Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary 2013 CENELEC 0 schema 2394 EN 61747-10-1 Liquid crystal display devices - Part 10-1: Environmental, endurance and mechanical test methods - Mechanical 2013 CENELEC 0 2395 EN 60679-3 Quartz crystal controlled oscillators of assessed quality - Part 3: Standard outlines and lead connections 2013 CENELEC 0 2396 EN 61169-1 Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods 2013 CENELEC 0 2397 EN 61753-058- Fibre optic interconnecting devices and passive components - Performance standard - Part 058-2: Single mode fibre 2013 CENELEC 0 2 pigtailed style optical power limiter for category C - Controlled environment 2398 EN 61753-057- Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug- 2013 CENELEC 0 2 receptacle style optical fuse for category C - Controlled environment 2399 EN 60704-2-14 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: 2013 CENELEC 0 Particular requirements for refrigerators, frozen-food storage cabinets and food freezers - Incorporates Amendment A11: 2015 2400 EN 60947-5-3 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for 2013 CENELEC 0 proximity devices with defined behaviour under fault conditions (PDDB) 2401 EN 60469 Transitions, pulses and related waveforms - Terms, definitions and algorithms 2013 CENELEC 0 2402 EN 61753-056- Fibre optic interconnecting devices and passive components - Performance standard - Part 056-2: Single mode fibre 2013 CENELEC 0 2 pigtailed style optical fuse for category C - Controlled environment 2403 EN 61784-5-1 Industrial communication networks - Profiles - Part 5-1: Installation of fieldbuses - Installation profiles for CPF 1 2013 CENELEC 0 2404 EN 60743 Live working - Terminology for tools, devices and equipment 2013 CENELEC 0 2405 EN 62703 Expression of performance of fluorometric oxygen analyzers in liquid media 2013 CENELEC 0 2406 EN 50600-2-4 Information technology - Data centre facilities and infrastructures - Part 2-4: Telecommunications cabling infrastructure 2013 CENELEC 0 2407 EN 50288-1 Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification 2013 CENELEC 0 2408 EN 60422 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance 2013 CENELEC 0 2409 EN 60068-2-65 Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method 2013 CENELEC 0 2410 CLC/TR 50608 Smart grid projects in Europe 2013 CENELEC 0 2411 EN 50288-3-2 Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification 2013 CENELEC 0 for unscreened cables characterised up to 100 MHz - Work area and patch cord cables 2412 EN 61300-2-7 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - 2013 CENELEC 0 Bending moment 2413 EN 60519-10 Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for 2013 CENELEC 0 industrial and commercial applications 2414 EN 62444 Cable glands for electrical installations 2013 CENELEC 0 2415 EN 50539-11 Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 11: 2013 CENELEC 0 Requirements and tests for SPDs in photovoltaic applications - Incorporates Amendment A1: 2014 2416 CLC/TS 50539- Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 12: Selection 2013 CENELEC 0 12 and application principles - SPDs connected to photovoltaic installations 2417 EN 62606 General requirements for arc fault detection devices - Incorporates Amendment A1: 2017 2013 CENELEC 0 2418 EN 62364 Hydraulic machines - Guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines 2013 CENELEC 0 2419 EN 62488-1 Power line communication systems for power utility applications - Part 1: Planning of analogue and digital power line 2013 CENELEC 0 carrier systems operating over EHV/HV/MV electricity grids 2420 EN 61499-2 Function blocks - Part 2: Software tool requirements 2013 CENELEC 0 2421 EN 61753-021- Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic 2013 CENELEC 0 3 connectors for category U - Uncontrolled environment 2422 EN 62739-1 Test method for erosion of wave soldering equipment using molten lead-free solder alloy - Part 1: Erosion test method for 2013 CENELEC 0 metal materials without surface processing 2423 EN 62264-1 Enterprise-control system integration - Part 1: Models and terminology 2013 CENELEC 0 2424 EN 60068-2-78 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state 2013 CENELEC 0 2425 EN 50292 Electrical apparatus for the detection of carbon monoxide in domestic premises, caravans and boats - Guide on the 2013 CENELEC 0 selection, installation, use and maintenance 2426 EN 60947-7-4 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors 2013 CENELEC 0 2427 EN 50411-3-6 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-6: 2013 CENELEC 0 Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U) 2428 EN 60358-2 Coupling capacitors and capacitor dividers - Part 2: AC or DC single-phase coupling capacitor connected between line and 2013 CENELEC 0 ground for power line carrier-frequency (PLC) application 2429 EN 61784-5-14 Industrial communication networks - Profiles - Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14 2013 CENELEC 0 2430 EN 61207-7 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers 2013 CENELEC 0 2431 EN 50050-1 Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable 2013 CENELEC 0 liquid coating materials 2432 EN 62567 Overhead lines - Methods for testing self-damping characteristics of conductors 2013 CENELEC 0 2433 EN 62610-4 Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 2013 CENELEC 0 60917 series - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets 2434 EN 61993-2 Maritime navigation and radiocommunication equipment and systems - Automatic Identification Systems (AIS) - Part 2: 2013 CENELEC 0 Class A shipborne equipment of the automatic identification system (AIS) - Operational and performance requirements, methods of test and re 2435 EN 62506 Methods for product accelerated testing 2013 CENELEC 0 2436 EN 60598-2-12 Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights 2013 CENELEC 0 2437 EN 62321-1 Determination of certain substances in electrotechnical products - Part 1: Introduction and overview 2013 CENELEC 0 2438 EN 62623 Desktop and notebook computers - Measurement of energy consumption 2013 CENELEC 0 2439 EN 61496-2 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active 2013 CENELEC 0 opto-electronic protective devices (AOPDs) 2440 EN 61249-2-39 Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - 2013 CENELEC 0 High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad 2441 EN 60601-2-22 Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, 2013 CENELEC 0 cosmetic, therapeutic and diagnostic laser equipment 2442 EN 50561-1 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and 2013 CENELEC 0 methods of measurement - Part 1: Apparatus for in-home use - Incorporating corrigendum January 2015 2443 EN 62271-101 High-voltage switchgear and controlgear - Part 101: Synthetic testing - Incorporates Amendment A1: 2018 2013 CENELEC 0 2444 EN 61000-3-3 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in 2013 CENELEC 0 public low-voltage supply systems, for equipment with rated current â_¤ 16 A per phase and not subject to conditional connection 2445 EN 50110-1 Operation of electrical installations - Part 1: General requirements 2013 CENELEC 0 2446 EN 60598-2-11 Luminaires - Part 2-11: Particular requirements - Aquarium luminaires 2013 CENELEC 0 2447 EN 61850-5 Communication networks and systems for power utility automation - Part 5: Communication requirements for functions 2013 CENELEC 0 and device models 2448 EN 61672-2 Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests - Incorporates Amendment A1: 2017 2013 CENELEC 0 2449 EN 55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment - 2013 CENELEC 0 Incorporates Amendment A1: 2015 2450 EN 62542 Environmental standardization for electrical and electronic products and systems - Glossary of terms 2013 CENELEC 0 2451 EN 62026-7 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet 2013 CENELEC 0 2452 EN 62664-1-1 Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC- 2013 CENELEC 0 PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre 2453 EN 60076-3 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air - Incorporates Amendment A1: 2013 CENELEC 0 2018 2454 EN 61300-2-19 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - 2013 CENELEC 0 Damp heat (steady state) 2455 EN 61643-312 Components for low-voltage surge protective devices - Part 312: Selection and application principles for gas discharge 2013 CENELEC 0 tubes 2456 EN 62037-6 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation 2013 CENELEC 0 in antennas 2457 EN 62047-19 Semiconductor devices - Micro-electromechanical devices - Part 19: Electronic compasses 2013 CENELEC 0 2458 EN 50571 Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines - 2013 CENELEC 0 Incorporates Amendment A1: 2018 2459 EN 61753-089- Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized 2013 CENELEC 0 2 single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment 2460 EN 60384-14 Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic 2013 CENELEC 0 interference suppression and connection to the supply mains - Incorporates Amendment A1: 2016 2461 EN 61326-2-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - 2013 CENELEC 0 Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected 2462 EN 61784-5-13 Industrial communication networks - Profiles - Part 5-13: Installation of fieldbuses - Installation profiles for CPF 13 2013 CENELEC 0 2463 EN 62341-5-3 Organic Light Emitting Diode (OLED) displays - Part 5-3: Measuring methods of image sticking and lifetime 2013 CENELEC 0 2464 EN 61754-1 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and 2013 CENELEC 0 guidance 2465 EN 60286-4 Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in 2013 CENELEC 0 packages of different forms 2466 EN 50547 Railway applications - Batteries for auxiliary power supply systems 2013 CENELEC 0 2467 EN 62698 Multimedia home server systems - Rights information interoperability for IPTV 2013 CENELEC 0 2468 EN 61300-3-48 Fibre optic interconnect devices and passive components - Basic test and measurement procedures - Part 3-48: 2013 CENELEC 0 Examinations and measurements - Spring compression force of the coupling sleeve for rectangular ferrule multi-fibre connectors 2469 CLC/TR 62258- Semiconductor die products - Part 4: Questionnaire for die users and suppliers 2013 CENELEC 0 4 2470 EN 62629-1-2 3D Display devices - Part 1-2: Generic - Terminology and letter symbols 2013 CENELEC 0 2471 EN 62343-1-3 Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized) 2013 CENELEC 0 2472 EN 61212-3-1 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - 2013 CENELEC 0 Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes 2473 EN 61249-2-30 Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - 2013 CENELEC 0 Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad 2474 EN 61249-4-19 Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg 2013 CENELEC 0 materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined 2475 EN 61710 Power law model - Goodness-of-fit tests and estimation methods 2013 CENELEC 0 2476 EN 60243-1 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies 2013 CENELEC 0 2477 EN 61587-3 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding 2013 CENELEC 0 performance tests for cabinets and subracks 2478 EN 62271-112 High-voltage switchgear and controlgear - Part 112: Alternating current high-speed earthing switches for secondary arc 2013 CENELEC 0 extinction on transmission lines 2479 EN 50290-2-23 Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables 2013 CENELEC 0 used in access telecommunication networks: Outdoor cables 2480 EN 50288-2-2 Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification 2013 CENELEC 0 for screened cables characterised up to 100 MHz - Work area and patch cord cables 2481 EN 60335-2-34 Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressors 2013 CENELEC 0 2482 EN 61121 Tumble dryers for household use - Methods for measuring the performance 2013 CENELEC 0 2483 EN 62388 Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, 2013 CENELEC 0 methods of testing and required test results 2484 EN 62133 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed 2013 CENELEC 0 secondary cells, and for batteries made from them, for use in portable applications - Remains Current 2485 EN 61300-3-50 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: 2013 CENELEC 0 Examinations and measurements - Crosstalk for optical spatial switches 2486 EN 50541-2 Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not 2013 CENELEC 0 exceeding 36 kV - Part 2: Determination of loadability of a transformer loaded with nonsinusoidal current 2487 EN 61300-2-52 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-52: Tests - 2013 CENELEC 0 Bending test for cords 2488 EN 50518-3 Monitoring and alarm receiving centre - Part 3: Procedures and requirements for operation 2013 CENELEC 0 2489 EN 61643-311 Components for low-voltage surge protective devices - Part 311: Performance requirements and test circuits for gas 2013 CENELEC 0 discharge tubes (GDT) 2490 EN 62037-5 Passive RF and microwave devices, intermodulation level measurement - Part 5: Measurement of passive intermodulation 2013 CENELEC 0 in filters 2491 EN 50569 Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors - 2013 CENELEC 0 Incorporates Amendment A1: 2018 2492 EN 61753-059- Fibre optic interconnecting devices and passive components - Performance standard - Part 059-2: Single-mode fibre plug- 2013 CENELEC 0 2 receptacle style optical limiter for category C - Controlled environment 2493 EN 61326-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements 2013 CENELEC 0 2494 EN 61784-5-11 Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11 2013 CENELEC 0 2495 EN 62612 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements - 2013 CENELEC 0 Incorporates Amendment A11: 2017 2496 EN 50050-3 Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable 2013 CENELEC 0 flock 2497 EN 50578 Railways applications - Direct current signalling relays 2013 CENELEC 0 2498 EN 62271-4 High-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures 2013 CENELEC 0 2499 EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing 2013 CENELEC 0 machines, units and systems 2500 EN 61924-2 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Part 2: Modular 2013 CENELEC 0 structure for INS - Operational and performance requirements, methods of testing and required test results 2501 EN 62552 Household refrigerating appliances - Characteristics and test methods 2013 CENELEC 0 2502 EN 60549 High-voltage fuses for the external protection of shunt capacitors 2013 CENELEC 0 2503 EN 61400-12-2 Wind turbines - Part 12-2: Power performance of electricity-producing wind turbines based on nacelle anemometry 2013 CENELEC 0 2504 EN 50288-2-1 Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification 2013 CENELEC 0 for screened cables characterised up to 100 MHz - Horizontal and building backbone cables 2505 EN 60721-2-2 Classification of environmental conditions - Part 2-2: Environmental conditions appearing in nature - Precipitation and 2013 CENELEC 0 wind 2506 EN 61347-2-9 Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding 2013 CENELEC 0 fluorescent lamps) 2507 EN 50290-2-25 Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds 2013 CENELEC 0 2508 EN 61968-100 Application integration at electric utilities - System interfaces for distribution management - Part 100: Implementation 2013 CENELEC 0 profiles 2509 EN 61249-2-27 Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - 2013 CENELEC 0 Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning te 2510 EN 61249-4-18 Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg 2013 CENELEC 0 materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (v 2511 EN 62595-2 LCD backlight unit - Part 2: Electro-optical measurement methods of LED backlight unit 2013 CENELEC 0 2512 EN 60216-8 Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance 2013 CENELEC 0 characteristics using simplified procedures 2513 EN 50083-8 Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for 2013 CENELEC 0 networks 2514 EN 62056-9-7 Electricity metering data exchange - The DLMS/COSEM suite - Part 9-7: Communication profile for TCP-UDP/IP 2013 CENELEC 0 networks 2515 EN 60974-2 Arc welding equipment - Part 2: Liquid cooling systems 2013 CENELEC 0 2516 EN 61788-18 Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy- 2013 CENELEC 0 sheathed Bi-2223 and Bi-2212 composite superconductors 2517 EN 61427-1 Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 1: 2013 CENELEC 0 Photovoltaic off-grid application 2518 EN 50518-2 Monitoring and alarm receiving centre - Part 2: Technical requirements 2013 CENELEC 0 2519 EN 62217 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria 2013 CENELEC 0 2520 EN 62516-3 Terrestrial digital multimedia broadcasting (T-DMB) receivers - Part 3: Common API 2013 CENELEC 0 2521 EN 61513 Nuclear power plants - Instrumentation and control important to safety - General requirements for systems 2013 CENELEC 0 2522 EN 62595-1-1 LCD backlight unit - Part 1-1: Generic specification 2013 CENELEC 0 2523 EN 60512-28- Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on 2013 CENELEC 0 100 IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g 2524 EN 60584-1 Thermocouples - Part 1: EMF specifications and tolerances 2013 CENELEC 0 2525 EN 60335-2-17 Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and 2013 CENELEC 0 similar flexible heating appliances 2526 EN 61996-1 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 1: 2013 CENELEC 0 Performance requirements, methods of testing and required test results 2527 EN 61499-1 Function blocks - Part 1: Architecture 2013 CENELEC 0 2528 EN 61784-5-8 Industrial communication networks - Profiles - Part 5-8: Installation of fieldbuses - Installation profiles for CPF 8 2013 CENELEC 0 2529 EN 50136-2 Alarm systems - Alarm transmission systems and equipment - Part 2: Requirements for Supervised Premises Transceiver 2013 CENELEC 0 (SPT) 2530 EN 50559 Electric room heating, underfloor heating, characteristics of performance - Definitions, method of testing, sizing and 2013 CENELEC 0 formula symbols 2531 EN 50570 Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers - 2013 CENELEC 0 Incorporates Amendment A1: 2018 2532 EN 62625-1 Electronic railway equipment - On board driving data recording system - Part 1: System specification - Incorporates 2013 CENELEC 0 Amendment A1: 2017 2533 EN 60601-2-65 Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental 2013 CENELEC 0 intra-oral X-ray equipment 2534 EN 61131-3 Programmable controllers - Part 3: Programming languages 2013 CENELEC 0 2535 EN 62056-8-3 Electricity metering data exchange - The DLMS/COSEM suite - Part 8-3: Communication profile for PLC S-FSK 2013 CENELEC 0 neighbourhood networks 2536 EN 62693 Industrial electroheating installations - Test methods for infrared electroheating installations 2013 CENELEC 0 2537 EN 62341-5-2 Organic light emitting diode (OLED) displays - Part 5-2: Mechanical endurance testing methods 2013 CENELEC 0 2538 EN 61189-11 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 11: 2013 CENELEC 0 Measurement of melting temperature or melting temperature ranges of solder alloys 2539 EN 50174-3 Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings - Incorporates 2013 CENELEC 0 Amendment A1: 2017 2540 EN 61672-1 Electroacoustics - Sound level meters - Part 1: Specifications 2013 CENELEC 0 2541 EN 60688 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals 2013 CENELEC 0 2542 EN 62680-2 Universal serial bus interfaces for data and power - Part 2: Universal serial bus - Micro-USB cables and connectors 2013 CENELEC 0 specification, revision 1.01 2543 EN 61674 Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray 2013 CENELEC 0 diagnostic imaging 2544 EN 60598-2-24 Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures 2013 CENELEC 0 2545 EN 61753-143- Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA- 2013 CENELEC 0 2 based dispersion compensator of single-mode fibre transmission for category C - Controlled environment 2546 EN 62553 Methods of measurement for digital network - Performance characteristics of terrestrial digital multimedia transmission 2013 CENELEC 0 network 2547 EN 61672-3 Electroacoustics - Sound level meters - Part 3: Periodic tests 2013 CENELEC 0 2548 EN 60952-3 Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP) 2013 CENELEC 0 2549 EN 61249-2-40 Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials clad and unclad - 2013 CENELEC 0 High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad 2550 EN 50288-6-2 Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification 2013 CENELEC 0 for unscreened cables characterised up to 250 MHz - Work area and patch cord cables 2551 EN 60034-28 Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three- 2013 CENELEC 0 phase low-voltage cage induction motors 2552 EN 60695-2-10 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure 2013 CENELEC 0 2553 EN 61212-3-2 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - 2013 CENELEC 0 Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes 2554 EN 61772 Nuclear power plants - Control rooms - Application of visual display units (VDUs) 2013 CENELEC 0 2555 EN 50289-3-8 Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods - Abrasion resistance of cable 2013 CENELEC 0 sheath markings 2556 EN 60839-11-1 Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components 2013 CENELEC 0 requirements 2557 EN 60034-18- Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound 2013 CENELEC 0 21 windings - Thermal evaluation and classification 2558 EN 50518-1 Monitoring and alarm receiving centre - Part 1: Location and construction requirements 2013 CENELEC 0 2559 EN 60191-6-22 Mechanical standardization of semiconductor devices - Part 6-22: General rules for the preparation of outline drawings of 2013 CENELEC 0 surface mounted semiconductor device packages - Design guide for semiconductor packages Silicon Fine-pitch Ball Grid Array and Silico 2560 EN 61496-1 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests 2013 CENELEC 0 2561 EN 61557-14 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2013 CENELEC 0 or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery 2562 EN 61326-2-5 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - 2013 CENELEC 0 Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1 2563 EN 61300-3-49 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-49: 2013 CENELEC 0 Examinations and measurements - Guide pin retention force for rectangular ferrule multi-fibre connectors 2564 EN 61784-5-6 Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 2013 CENELEC 0 2565 EN 62496-2-4 Optical circuit boards - Basic test and measurement procedures - Part 2-4: Optical transmission test for optical circuit 2013 CENELEC 0 boards without input/output fibres 2566 EN 50551-2 Simplex and duplex cables to be used for cords - Part 2: Detailed specification and minimum requirements for a 3,0 mm 2013 CENELEC 0 simplex ruggedised single mode fibre cable to be used for patchcords/cords category U 2567 EN 61169-26 Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors 2013 CENELEC 0 2568 EN 50288-6-1 Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification 2013 CENELEC 0 for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables 2569 EN 61968-11 Application integration at electric utilities - System interfaces for distribution management - Part 11: Common information 2013 CENELEC 0 model (CIM) extensions for distribution 2570 EN 62056-7-6 Electricity metering data exchange - The DLMS/COSEM suite - Part 7-6: The 3-layer, connection-oriented HDLC based 2013 CENELEC 0 communication profile 2571 EN 50136-3 Alarm systems - Alarm transmission systems and equipment - Part 3: Requirements for Receiving Centre Transceiver 2013 CENELEC 0 (RCT) 2572 EN 61169-43 Radio-frequency connectors - Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors 2013 CENELEC 0 2573 EN 62037-2 Passive RF and microwave devices, intermodulation level measurement - Part 2: Measurement of passive intermodulation 2013 CENELEC 0 in coaxial cable assemblies 2574 EN 61514-2 Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with 2013 CENELEC 0 pneumatic outputs mounted on an actuator valve assembly 2575 EN 61083-2 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software 2013 CENELEC 0 for tests with impulse voltages and currents 2576 EN 61326-2-4 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - 2013 CENELEC 0 Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and f 2577 EN 61784-5-2 Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 2013 CENELEC 0 2578 EN 61747-2-1 Liquid crystal display devices - Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification 2013 CENELEC 0 2579 EN 60544-1 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and 2013 CENELEC 0 dosimetry - Edition 1.0 2580 EN 60335-2-27 Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to 2013 CENELEC 0 ultraviolet and infrared radiation 2581 CLC/TS 50238- Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle 2013 CENELEC 0 3 counters 2582 EN 60794-2-31 Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises 2013 CENELEC 0 cabling 2583 EN 50288-5-2 Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification 2013 CENELEC 0 for screened cables characterized up to 250 MHz - Work area and patch cord cables 2584 EN 61193-3 Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and 2013 CENELEC 0 in-process auditing 2585 EN 61400-11 Wind turbines Part 11: Acoustic noise measurement techniques - Incorporates Amendment A1: 2018 2013 CENELEC 0 2586 EN 60695-11- Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods 2013 CENELEC 0 10 2587 EN 61850-7- Communication networks and systems for power utility automation - Part 7-410: Basic communication structure - 2013 CENELEC 0 410 Hydroelectric power plants - Communication for monitoring and control - Incorporates Amendment A1: 2016 2588 EN 60598-2-8 Luminaires - Part 2-8: Particular requirements - Handlamps 2013 CENELEC 0 2589 EN 62382 Control systems in the process industry - Electrical and instrumentation loop check 2013 CENELEC 0 2590 EN 60349-4 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical 2013 CENELEC 0 machines connected to an electronic converter 2591 EN 61689 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 2013 CENELEC 0 5 MHz 2592 CLC/TS 50591 Specification and verification of energy consumption for railway rolling stock 2013 CENELEC 0 2593 EN 62026-2 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) 2013 CENELEC 0 2594 CLC/TR 50422 Guide for the application of the European Standard EN 50160 2013 CENELEC 0 2595 EN 61788-16 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of 2013 CENELEC 0 superconductors at microwave frequencies 2596 EN 61300-2-28 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - 2013 CENELEC 0 Industrial atmosphere (sulphur dioxide) 2597 EN 50377-17-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2013 CENELEC 0 Part 17-1: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre an 2598 EN 61557-10 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2013 CENELEC 0 or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective me 2599 EN 60745-2-23 Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools 2013 CENELEC 0 2600 EN 60794-3-12 Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical 2013 CENELEC 0 telecommunication cables for use in premises cabling 2601 EN 61784-5-18 Industrial communication networks - Profiles - Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18 2013 CENELEC 0 2602 EN 62040-4 Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting 2013 CENELEC 0 2603 EN 61784-5-3 Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 2013 CENELEC 0 2604 EN 60432-3 Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) 2013 CENELEC 0 2605 EN 62395-1 Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing 2013 CENELEC 0 requirements 2606 EN 61754-4 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector 2013 CENELEC 0 family 2607 EN 61558-2-14 Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests 2013 CENELEC 0 for variable transformers and power supply units incorporating variable transformers 2608 EN 61131-9 Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) 2013 CENELEC 0 2609 EN 62716 Photovoltaic (PV) modules - Ammonia corrosion testing 2013 CENELEC 0 2610 EN 60143-2 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks 2013 CENELEC 0 2611 EN 61784-5-19 Industrial communication networks - Profiles - Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19 2013 CENELEC 0 2612 EN 60952-1 Aircraft batteries - Part 1: General test requirements and performance levels 2013 CENELEC 0 2613 EN 61326-2-3 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - 2013 CENELEC 0 Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning 2614 EN 62264-2 Enterprise-control system integration - Part 2: Objects and attributes for enterprise-control system integration 2013 CENELEC 0 2615 EN 50332-2 Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure 2013 CENELEC 0 level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one packa 2616 EN 60255-149 Measuring relays and protection equipment - Part 149: Functional requirements for thermal electrical relays 2013 CENELEC 0 2617 EN 60068-2-55 Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce 2013 CENELEC 0 2618 EN 50288-5-1 Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification 2013 CENELEC 0 for screened cables characterized up to 250 MHz - Horizontal and building backbone cables 2619 EN 61169-42 Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors 2013 CENELEC 0 2620 EN 60286-3 Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes - 2013 CENELEC 0 Incorporating corrigendum October 2013 2621 EN 61499-4 Function blocks - Part 4: Rules for compliance profiles 2013 CENELEC 0 2622 EN 55013 Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and 2013 CENELEC 0 methods of measurement - Incorporates Amendment A1: 2016 2623 EN 50438 Requirements for micro-generating plants to be connected in parallel with public low-voltage distribution networks 2013 CENELEC 0 2624 EN 61300-2-11 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - 2013 CENELEC 0 Axial compression 2625 EN 62282-6- Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability 2013 CENELEC 0 300 2626 EN 60455-3-8 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: 2013 CENELEC 0 Resins for cable accessories 2627 EN 60068-2-57 Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method 2013 CENELEC 0 2628 EN 61161 Ultrasonics - Power measurement - Radiation force balances and performance requirements 2013 CENELEC 0 2629 EN 61439-4 Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites 2013 CENELEC 0 (ACS) 2630 EN 61526 Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, 2013 CENELEC 0 neutron and beta radiations - Direct reading personal dose equivalent meters 2631 EN 61400-4 Wind turbines - Part 4: Design requirements for wind turbine gearboxes 2013 CENELEC 0 2632 EN 62325-450 Framework for energy market communications - Part 450: Profile and context modelling rules 2013 CENELEC 0 2633 EN 60869-1 Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic 2013 CENELEC 0 specification 2634 EN 60747-16-5 Semiconductor devices - Part 16-5: Microwave integrated circuits - Oscillators 2013 CENELEC 0 2635 EN 60404-11 Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and 2013 CENELEC 0 strip 2636 EN 61753-022- Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors 2013 CENELEC 0 2 terminated on multimode fibre for category C - Controlled environment 2637 EN 60952-2 Aircraft batteries - Part 2: Design and construction requirements 2013 CENELEC 0 2638 EN 61788-17 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in 2013 CENELEC 0 large-area superconducting films 2639 EN 61300-3-4 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: 2013 CENELEC 0 Examinations and measurements - Attenuation 2640 EN 60793-1-42 Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion 2013 CENELEC 0 2641 EN 62361-2 Power systems management and associated information exchange - Interoperability in the long term - Part 2: End to end 2013 CENELEC 0 quality codes for supervisory control and data acquisition (SCADA) 2642 EN 61754-27 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 27: Type M12-FO 2013 CENELEC 0 connector family 2643 EN 61753-091- Fibre optic interconnecting devices and passive components - Performance standard - Part 091-2: Non-connectorized 2013 CENELEC 0 2 single-mode fibre optic pigtailed circulators for category C - Controlled environment 2644 EN 61968-1 Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architecture 2013 CENELEC 0 and general recommendations 2645 EN 50379-2 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - 2012 CENELEC 0 Part 2: Performance requirements for apparatus used in statutory inspections and assessment 2646 EN 61148 Terminal markings for valve device stacks and assemblies and for power conversion equipment 2012 CENELEC 0 2647 EN 60811-602 Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in 2012 CENELEC 0 filling compounds 2648 EN 60794-2-21 Optical fibre cables - Part 2-21: Indoor optical fibre cables - Detailed specification for multi-fibre optical distribution cables 2012 CENELEC 0 for use in premises cabling 2649 EN 62047-14 Semiconductor devices - Micro-electromechanical devices - Part 14: Forming limit measuring method of metallic film 2012 CENELEC 0 materials 2650 EN 60874-1 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic 2012 CENELEC 0 specification 2651 EN 60598-2-2 Luminaires - Part 2-2: Particular requirements - Recessed luminaires - Incorporating Corrigendum 2012 2012 CENELEC 0 2652 EN 62639 Fluorescent induction lamps - Performance specification 2012 CENELEC 0 2653 EN 62341-6-2 Organic light emitting diode (OLED) displays - Part 6-2: Measuring methods of visual quality and ambient performance 2012 CENELEC 0 2654 EN 62271-203 High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 2012 CENELEC 0 kV 2655 EN 60512-24-1 Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual 2012 CENELEC 0 magnetism 2656 EN 50134-3 Alarm systems - Social alarm systems - Part 3: Local unit and controller - Incorporating corrigendum July 2015 2012 CENELEC 0 2657 EN 61362 Guide to specification of hydraulic turbine governing systems 2012 CENELEC 0 2658 EN 60811-507 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for 2012 CENELEC 0 cross-linked materials 2659 EN 50411-2-2 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealed 2012 CENELEC 0 pan fibre splice closures Type 1, for category S & A 2660 EN 61869-2 Instrument transformers - Part 2: Additional requirements for current transformers 2012 CENELEC 0 2661 EN 60811-506 Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low 2012 CENELEC 0 temperature for insulations and sheaths 2662 EN 61009-1 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - 2012 CENELEC 0 Part 1: General rules - Incorporates Amendment A12: 2016 2663 EN 62023 Structuring of technical information and documentation - Incorporating corrigendum February 2012 2012 CENELEC 0 2664 EN 60734 Household electrical appliances - Performance - Water for testing 2012 CENELEC 0 2665 EN 60317-0-8 Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass fibre wound, resin or 2012 CENELEC 0 varnish impregnated or not impregnated, bare or enamelled rectangular copper wire 2666 EN 61784-5-15 Industrial communication networks - Profiles - Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15 - 2012 CENELEC 0 Incorporates Amendment A1: 2015 2667 EN 61375-3-2 Electronic railway equipment - Train communication network (TCN) - Part 3-2: MVB (Multifunction Vehicle Bus) 2012 CENELEC 0 conformance testing 2668 EN 60626-1 Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements 2012 CENELEC 0 2669 EN 60335-2-68 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for 2012 CENELEC 0 commercial use 2670 EN 62423 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household 2012 CENELEC 0 and similar uses 2671 EN 60704-2-6 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: 2012 CENELEC 0 Particular requirements for tumble dryers 2672 EN 60297-3- Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 2012 CENELEC 0 107 3-107: Dimensions of subracks and plug-in units, small form factor 2673 EN 61439-3 Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary 2012 CENELEC 0 persons (DBO) - Incorporating corrigendum September 2013 2674 EN 60704-2-4 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: 2012 CENELEC 0 Particular requirements for washing machines and spin extractors 2675 EN 60811-410 Electric and optical fibre cables - Test methods for nonmetallic materials - Part 410: Miscellaneous tests - Test method for 2012 CENELEC 0 copper-catalyzed oxidative degradation of polyolefin insulated conductors - Incorporates Amendment A1: 2017 2676 EN 61056-2 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking 2012 CENELEC 0 2677 EN 61837-1 Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead 2012 CENELEC 0 connections - Part 1: Plastic moulded enclosure outlines 2678 EN 50131-2-7-2 Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive) - 2012 CENELEC 0 Incorporates Amendment A2: 2016 2679 EN 62585 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter 2012 CENELEC 0 2680 EN 61754-28 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 28: Type LF3 2012 CENELEC 0 connector family 2681 EN 61747-30-1 Liquid crystal display devices - Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type 2012 CENELEC 0 2682 EN 60079-11 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" 2012 CENELEC 0 2683 EN 62037-1 Passive RF and microwave devices, intermodulation level measurement - Part 1: General requirements and measuring 2012 CENELEC 0 methods 2684 EN 50152-1 Railway applications - Fixed installations - Particular requirements for alternating current switchgear - Part 1: Circuit- 2012 CENELEC 0 breakers with nominal voltage above 1 kV - Incorporates Amendment A1: 2013 2685 EN 60811-402 Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water 2012 CENELEC 0 absorption tests 2686 EN 60335-2-69 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, 2012 CENELEC 0 including power brush for commercial use 2687 EN 61076-2- Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for 2012 CENELEC 0 101 M12 connectors with screw-locking 2688 EN 60811-601 Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the 2012 CENELEC 0 drop point of filling compounds 2689 EN 61347-2-2 Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic stepdown convertors for filament 2012 CENELEC 0 lamps 2690 EN 60317-2 Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 2012 CENELEC 0 130, with a bonding layer 2691 EN 62697-1 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: 2012 CENELEC 0 Test method for quantitative determination of dibenzyldisulfide (DBDS) 2692 EN 60811-405 Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal 2012 CENELEC 0 stability test for PVC insulations and PVC sheaths 2693 EN 60512-7-2 Connectors for electronic equipment - Tests and measurements Part 7-2: Impact tests (free connectors) - Test 7b: 2012 CENELEC 0 Mechanical strength impact 2694 EN 60384-22 Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer 2012 CENELEC 0 capacitors of ceramic dielectric, Class 2 2695 EN 60034-18- Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound 2012 CENELEC 0 31 windings - Thermal evaluation and classification of insulation systems used in rotating machines 2696 EN 61754-20 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20: Type LC connector 2012 CENELEC 0 family 2697 EN 61881-2 Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 2: Aluminium electrolytic 2012 CENELEC 0 capacitors with non solid electrolyte 2698 EN 60811-202 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of 2012 CENELEC 0 thickness of non-metallic sheath - Incorporates Amendment A1: 2018 2699 EN 60811-409 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass 2012 CENELEC 0 test for thermoplastic insulations and sheaths 2700 EN 50553 Railway applications - Requirements for running capability in case of fire on board of rolling stock - Incorporates 2012 CENELEC 0 Amendment A1: 2016 2701 EN 62551 Analysis techniques for dependability - Petri net techniques 2012 CENELEC 0 2702 EN 60874-1-1 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank 2012 CENELEC 0 detail specification 2703 EN 61056-1 General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - 2012 CENELEC 0 Methods of test 2704 EN 60731 Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy 2012 CENELEC 0 2705 EN 50441-1 Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1 2012 CENELEC 0 2706 EN 62337 Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones 2012 CENELEC 0 2707 EN 61158-5-21 Industrial communication networks - Fieldbus specifications - Part 5-21: Application layer service definition - Type 21 2012 CENELEC 0 elements 2708 EN 61010-2- Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular 2012 CENELEC 0 032 requirements for hand-held and hand-manipulated current sensors for electrical test and measurement 2709 EN 61158-5-15 Industrial communication networks - Fieldbus specifications - Part 5-15: Application layer service definition - Type 15 2012 CENELEC 0 elements 2710 EN 50580 Safety of hand-held electric motor operated tools - Particular requirements for spray guns - Incorporates Amendment A1: 2012 CENELEC 0 2013 2711 EN 50379-3 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - 2012 CENELEC 0 Part 3: Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances 2712 EN 61988-2-5 Plasma display panels - Part 2-5: Measuring methods - Acoustic noise 2012 CENELEC 0 2713 EN 61291-4 Optical amplifiers - Part 4: Multichannel applications - Performance specification template 2012 CENELEC 0 2714 EN 62037-3 Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation 2012 CENELEC 0 in coaxial connectors 2715 EN 60352-5 Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance 2012 CENELEC 0 2716 EN 60695-4 Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products 2012 CENELEC 0 2717 EN 61558-2-15 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests 2012 CENELEC 0 for isolating transformers for the supply of medical locations 2718 EN 62027 Preparation of object lists, including parts lists 2012 CENELEC 0 2719 EN 61010-2- Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular 2012 CENELEC 0 091 requirements for cabinet x-ray systems - Incorporating corrigendum January 2013 2720 EN 60947-4-2 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers 2012 CENELEC 0 and starters 2721 EN 61300-2-33 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - 2012 CENELEC 0 Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures 2722 EN 60669-2-6 Switches for household and similar fixed electrical installations - Part 2-6: Particular requirements - Firemans switches for 2012 CENELEC 0 exterior and interior signs and luminaires 2723 EN 61915-2 Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 2: Root device profiles for 2012 CENELEC 0 starters and similar equipment 2724 EN 60440 Method of measurement of non-linearity in resistors 2012 CENELEC 0 2725 EN 61754-20- Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20-100: Interface 2012 CENELEC 0 100 standard for LC connectors with protective housings related to IEC 61076-3-106 2726 EN 62560 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications - Incorporates 2012 CENELEC 0 Amendment A1: 2015 2727 EN 50288-8 Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 2012 CENELEC 0 cables characterised up to 2 MHz 2728 EN 60384-2 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene 2012 CENELEC 0 terephthalate film dielectric d.c. capacitors 2729 EN 50411-2-3 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-3: Sealed 2012 CENELEC 0 inline fibre splice closures Type 1, for category S & A 2730 CLC/TR 50501- Railway applications - Rolling stock - Intercommunication between vehicles and train/wayside - Part 2: Technical contents 2012 CENELEC 0 2 of standardization work in the field of intercommunication 2731 EN 60335-2-72 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with 2012 CENELEC 0 or without traction drive, for commercial use 2732 EN 61000-4-4 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst 2012 CENELEC 0 immunity test 2733 EN 60079-35-2 Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety- 2012 CENELEC 0 related matters 2734 EN 60034-18- Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound 2012 CENELEC 0 34 windings - Evaluation of thermomechanical endurance of insulation systems 2735 EN 61158-6-18 Industrial communication networks - Fieldbus specifications - Part 6-18: Application layer protocol specification - Type 18 2012 CENELEC 0 elements 2736 EN 60317-62 Specifications for particular types of winding wires - Part 62: Polyester glass fibre wound, minimum class 200 resin or 2012 CENELEC 0 varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 2737 EN 61347-2-7 Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting 2012 CENELEC 0 (self-contained) 2738 EN 62271-200 High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages 2012 CENELEC 0 above 1 kV and up to and including 52 kV 2739 EN 62439-7 Industrial communication networks - High availability automation networks - Part 7: Ring-based Redundancy Protocol 2012 CENELEC 0 (RRP) 2740 EN 62037-4 Passive RF and microwave devices, intermodulation level measurement - Part 4: Measurement of passive intermodulation 2012 CENELEC 0 in coaxial cables 2741 EN 61158-5-18 Industrial communication networks - Fieldbus specifications - Part 5-18: Application layer service definition - Type 18 2012 CENELEC 0 elements 2742 EN 60811-502 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for 2012 CENELEC 0 insulations 2743 EN 60118-15 Electroacoustics - Hearing aids - Part 15: Methods for characterising signal processing in hearing aids with a speech-like 2012 CENELEC 0 signal 2744 EN 50411-2-4 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealed 2012 CENELEC 0 dome fibre splice closures Type 1, for category S & A 2745 EN 50574 Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbons 2012 CENELEC 0 or volatile hydrocarbons 2746 EN 60811-603 Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total 2012 CENELEC 0 acid number of filling compounds 2747 EN 50288-10-1 Multi-element metallic cables used in analogue and digital communication and control - Part 10-1: Sectional specification 2012 CENELEC 0 for screened cables characterized up to 500 MHz - Horizontal floor and building backbone cables 2748 EN 60512-27- Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 2012 CENELEC 0 100 60603-7 series connectors - Tests 27a to 27g 2749 EN 60747-15 Semiconductor devices - Discrete devices - Part 15: Isolated power semiconductor devices 2012 CENELEC 0 2750 EN 60683 Industrial electroheating equipment - Test methods for submerged-arc furnaces 2012 CENELEC 0 2751 EN 60317-49 Specifications for particular types of winding wires - Part 49: Glass-fibre wound high temperature resin or varnish 2012 CENELEC 0 impregnated, bare or enamelled round copper wire, temperature index 180 2752 EN 61982 Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests 2012 CENELEC 0 2753 EN 61375-1 Electronic railway equipment - Train communication network (TCN) - Part 1: General architecture 2012 CENELEC 0 2754 CLC/TR 50579 Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods for conducted disturbances 2012 CENELEC 0 in the frequency range 2 kHz - 150 kHz 2755 EN 60512-16- Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations 2012 CENELEC 0 21 - Test 16u: Whisker test via the application of external mechanical stresses 2756 EN 50152-2 Railway applications - Fixed installations - Particular requirements for alternating current switchgear - Part 2: 2012 CENELEC 0 Disconnectors, earthing switches and switches with nominal voltage above 1 kV 2757 EN 61094-8 Electroacoustics - Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working 2012 CENELEC 0 standard microphones by comparison - Incorporating corrigendum January 2013 2758 EN 60296 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear 2012 CENELEC 0 2759 EN 50317 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic 2012 CENELEC 0 interaction between pantograph and overhead contact line 2760 EN 61784-5-12 Industrial communication networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 - 2012 CENELEC 0 Incorporates Amendment A1: 2015 2761 EN 61131-6 Programmable controllers - Part 6: Functional safety 2012 CENELEC 0 2762 EN 61076-4- Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification 2012 CENELEC 0 116 for a high-speed two-part connector with integrated shielding function - Incorporates Amendment A1: 2016 2763 EN 60294 Measurement of the dimensions of a cylindrical component with axial terminations 2012 CENELEC 0 2764 EN 50293 Road traffic signal systems - Electromagnetic compatibility 2012 CENELEC 0 2765 EN 62474 Material declaration for products of and for the electrotechnical industry 2012 CENELEC 0 2766 EN 62477-1 Safety requirements for power electronic converter systems and equipment - Part 1: General - Incorporates Amendment 2012 CENELEC 0 A1: 2017 2767 EN 60662 High-pressure sodium vapour lamps - Performance specifications 2012 CENELEC 0 2768 EN 61029-2-1 Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches - Remains 2012 CENELEC 0 Current 2769 EN 60076-18 Power transformers - Part 18: Measurement of frequency response 2012 CENELEC 0 2770 EN 60384-13 Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric 2012 CENELEC 0 metal foil d.c. capacitors 2771 EN 60728-3-1 Cable networks for television signals, sound signals and interactive services - Part 3-1: Methods of measurement of non- 2012 CENELEC 0 linearity for full digital channel load with DVB-C signals 2772 EN 61784-5-4 Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4 - 2012 CENELEC 0 Incorporates Amendment A1: 2015 2773 EN 60811-203 Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of 2012 CENELEC 0 overall dimensions 2774 EN 61158-6-21 Industrial communication networks - Fieldbus specifications - Part 6-21: Application layer protocol specification - Type 21 2012 CENELEC 0 elements 2775 EN 60794-4-20 Optical fibre cables - Part 4-20: Aerial optical cables along electrical power lines - Family specification for ADSS (All 2012 CENELEC 0 Dielectric Self Supported) optical cables 2776 EN 62137-3 Electronics assembly technology - Part 3: Selection guidance of environmental and endurance test methods for solder joints 2012 CENELEC 0 2777 EN 60358-1 Coupling capacitors and capacitor dividers - Part 1: General rules 2012 CENELEC 0 2778 CLC/TR 50173- Information technology - Generic cabling systems - Part 99-3: Home cabling infrastructures up to 50 m in length to support 2012 CENELEC 0 99-3 simultaneous and non simultaneous provision of applications 2779 EN 60819-1 Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements 2012 CENELEC 0 2780 EN 61217 Radiotherapy equipment - Coordinates, movements and scales 2012 CENELEC 0 2781 EN 60811-503 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for 2012 CENELEC 0 sheaths 2782 EN 61158-6-15 Industrial communication networks - Fieldbus specifications - Part 6-15: Application layer protocol specification - Type 15 2012 CENELEC 0 elements 2783 EN 60512-1- Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications 2012 CENELEC 0 100 2784 EN 60811-604 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of 2012 CENELEC 0 absence of corrosive components in filling compounds 2785 EN 50288-11-1 Multi-element metallic cables used in analogue and digital communication and control - Part 11-1: Sectional specification 2012 CENELEC 0 for un-screened cables characterised up to 500 MHz - Horizontal and building backbone cables 2786 EN 61274-1-1 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1-1: Blank detail 2012 CENELEC 0 specification 2787 EN 60862-2 Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidelines for the use 2012 CENELEC 0 2788 EN 61010-2- Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular 2012 CENELEC 0 033 requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage 2789 EN 62047-13 Semiconductor devices - Micro-electromechanical devices - Part 13: Bend- and shear - type test methods of measuring 2012 CENELEC 0 adhesive strength for MEMS structures 2790 EN 62149-7 Fibre optic active components and devices - Performance standards - Part 7: 1 310 nm discrete vertical cavity surface 2012 CENELEC 0 emitting laser devices 2791 EN 61300-3-38 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3- 2012 CENELEC 0 38:Examinations and measurements - Group delay, chromatic dispersion and phase ripple 2792 EN 50388 Railway Applications - Power supply and rolling stock - Technical criteria for the coordination between power supply 2012 CENELEC 0 (substation) and rolling stock to achieve interoperability - Incorporating corrigenda August 2012, April 2013 and August 2013 2793 EN 60301 Preferred diameters of wire terminations of capacitors and resistors 2012 CENELEC 0 2794 EN 60317-50 Specifications for particular types of winding wires - Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare 2012 CENELEC 0 or enamelled round copper wire, temperature index 200 2795 EN 60811-512 Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to 2012 CENELEC 0 polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature 2796 EN 62271-107 High-voltage switchgear and controlgear - Part 107: Alternating current fused circuit-switchers for rated voltages above 1 2012 CENELEC 0 kV up to and including 52 kV 2797 EN 50600-1 Information technology - Data centre facilities and infrastructures - Part 1: General concepts 2012 CENELEC 0 2798 EN 61008-1 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - 2012 CENELEC 0 Part 1: General rules - Incorporates Amendment A12: 2017 2799 EN 62271-105 High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 2012 CENELEC 0 1 kV up to and including 52 kV 2800 EN 60544-2 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: 2012 CENELEC 0 Procedures for irradiation and test 2801 EN 61988-2-1 Plasma display panels - Part 2-1: Measuring methods - Optical and optoelectrical 2012 CENELEC 0 2802 EN 60851-6 Winding wires - Test methods - Part 6: Thermal properties 2012 CENELEC 0 2803 EN 60317-61 Specifications for particular types of winding wires - Part 61: Polyester glass fibre wound, minimum class 180, resin or 2012 CENELEC 0 varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 2804 EN 60811-403 Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance 2012 CENELEC 0 test on cross-linked compounds 2805 EN 60811-401 Electric and optical fibre cables Test methods for non-metallic materials Part 401: Miscellaneous tests Thermal ageing 2012 CENELEC 0 methods Ageing in an air oven - Incorporates Amendment A1: 2017 2806 EN 60811-605 Electric and optical fibre cables - Test methods for non-metallic materials - Part 605 : Physical tests - Measurement of 2012 CENELEC 0 carbon black and/or mineral filler in polyethylene compounds 2807 EN 61158-4-21 Industrial communication networks - Fieldbus specifications - Part 4-21: Data-link layer protocol specification - Type 21 2012 CENELEC 0 elements 2808 EN 60811-504 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at 2012 CENELEC 0 low temperature for insulation and sheaths 2809 EN 60335-2-25 Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including 2012 CENELEC 0 combination microwave ovens - Incorporates Amendment A2: 2016 2810 EN 61701 Salt mist corrosion testing of photovoltaic (PV) modules 2012 CENELEC 0 2811 EN 62358 Ferrite cores - Standard inductance factor for gapped cores and its tolerance 2012 CENELEC 0 2812 EN 60115-8 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors 2012 CENELEC 0 2813 EN 61753-087- Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised 2012 CENELEC 0 6 single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment 2814 EN 62282-3- Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation 2012 CENELEC 0 300 2815 EN 60811-406 Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to 2012 CENELEC 0 stress cracking of polyethylene and polypropylene compounds 2816 EN 60865-1 Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods 2012 CENELEC 0 2817 EN 50288-9-1 Multi-element metallic cables used in analogue and digital communication and control - Part 9-1: Sectional specification 2012 CENELEC 0 for screened cables characterised up to 1 000 MHz - Horizontal and building backbone cables 2818 EN 61314-1-1 Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification 2012 CENELEC 0 2819 EN 60317-48 Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or 2012 CENELEC 0 enamelled round copper wire, temperature index 155 2820 EN 60811-100 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General 2012 CENELEC 0 2821 EN 60384-21 Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer 2012 CENELEC 0 capacitors of ceramic dielectric, Class 1 2822 EN 61375-2-1 Electronic railway equipment - Train communication network (TCN) - Part 2-1: Wire Train Bus (WTB) 2012 CENELEC 0 2823 EN 60676 Industrial electroheating equipment - Test methods for direct arc furnaces 2012 CENELEC 0 2824 EN 62341-6-3 Organic light emitting diode (OLED) displays - Part 6-3: Measuring methods of image quality 2012 CENELEC 0 2825 EN 61274-1 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic 2012 CENELEC 0 specification 2826 EN 62034 Automatic test systems for battery powered emergency escape lighting 2012 CENELEC 0 2827 EN 60917-2-5 Modular order for the development of mechanical structures for electronic equipment practices - Part 2-5: Sectional 2012 CENELEC 0 specification - Interface co-ordination dimensions for the 25 mm equipment practice - Cabinet interface dimensions for miscellaneous equipm 2828 EN 60794-2-11 Optical fibre cables - Part 2-11: Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in 2012 CENELEC 0 premises cabling 2829 EN 61747-4 Liquid crystal display devices - Part 4: Liquid crystal display modules and cells - Essential ratings and characteristics 2012 CENELEC 0 2830 EN 60811-302 Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the 2012 CENELEC 0 C of filling compounds°آ C and 100°آ d.c. resistivity at 23 2831 EN 60811-411 Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low- 2012 CENELEC 0 temperature brittleness of filling compounds 2832 EN 62381 Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT) and site integration 2012 CENELEC 0 test (SIT) 2833 CLC/TS 62441 Safeguards against accidentally caused candle flame ignition for audio/video, communication and information technology 2012 CENELEC 0 equipment 2834 EN 61375-3-3 Electronic railway equipment - Train communication network (TCN) - Part 3-3: CANopen Consist Network (CCN) 2012 CENELEC 0 2835 EN 61439-6 Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways) 2012 CENELEC 0 2836 EN 61969-1 Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines 2012 CENELEC 0 2837 EN 61124 Reliability testing - Compliance tests for constant failure rate and constant failure intensity 2012 CENELEC 0 2838 EN 61643-11 Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - 2012 CENELEC 0 Requirements and test methods - Incorporates Amendment A11: 2018 2839 EN 60335-2-79 Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and 2012 CENELEC 0 steam cleaners 2840 EN 61280-2-2 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and 2012 CENELEC 0 extinction ratio measurement 2841 EN 62271-207 High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated 2012 CENELEC 0 voltages above 52 kV 2842 EN 60811-606 Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for 2012 CENELEC 0 determining the density 2843 EN 60811-505 Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low 2012 CENELEC 0 temperature for insulations and sheaths 2844 EN 61300-3-7 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: 2012 CENELEC 0 Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components 2845 EN 60811-201 Electric and optical fibre cables Test methods for non-metallic materials Part 201: General tests Measurement of insulation 2012 CENELEC 0 thickness - Incorporates Amendment A1: 2017 2846 EN 61754-29 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 29: Type BLINK 2012 CENELEC 0 connector series 2847 EN 62674-1 High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication 2012 CENELEC 0 equipment 2848 EN 50136-1 Alarm systems - Alarm transmission systems and equipment - Part 1: General requirements for alarm transmission systems 2012 CENELEC 0 2849 EN 61587-4 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 4: Combination of 2012 CENELEC 0 performance levels for modular cabinets 2850 EN 50131-2-7-3 Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) - 2012 CENELEC 0 Incorporates Amendment A2: 2016 2851 EN 82079-1 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed 2012 CENELEC 0 requirements 2852 EN 60811-510 Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to 2012 CENELEC 0 polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air 2853 EN 50441-2 Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 1 2012 CENELEC 0 2854 EN 60811-407 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of 2012 CENELEC 0 mass increase of polyethylene and polypropylene compounds 2855 EN 62059-32-1 Electricity metering equipment - Dependability - Part 32-1: Durability - Testing of the stability of metrological 2012 CENELEC 0 characteristics by applying elevated temperature 2856 EN 61375-2-2 Electronic railway equipment - Train communication network (TCN) - Part 2-2: Wire Train Bus conformance testing 2012 CENELEC 0 2857 EN 50367 Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead 2012 CENELEC 0 line (to achieve free access) - Incorporating corrigendum August 2013; Incorporates Amendment A1: 2016 2858 EN 61969-3 Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety 2012 CENELEC 0 aspects 2859 EN 60811-511 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of 2012 CENELEC 0 the melt f low index of polyethylene and polypropylene compounds - Incorporates Amendment A1: 2017 2860 EN 61314-1 Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification 2012 CENELEC 0 2861 EN 61754-26 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 26: Type SF connector 2012 CENELEC 0 family 2862 EN 61300-3-33 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: 2012 CENELEC 0 Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins 2863 EN 61881-3 Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 3: Electric double-layer capacitors 2012 CENELEC 0 - Incorporates Amendment A1: 2013 2864 EN 60811-301 Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the 2012 CENELEC 0 C of filling compounds°آ permittivity at 23 2865 EN 61300-2-10 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-10: Tests - 2012 CENELEC 0 Crush resistance 2866 EN 60512-99- Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating 2012 CENELEC 0 001 connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power 2867 EN 62282-2 Fuel cell technologies - Part 2: Fuel cell modules 2012 CENELEC 0 2868 EN 50411-3-1 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-1: Fibre 2012 CENELEC 0 management system, splice wall box, for category C & G 2869 EN 62305-2 Protection against lightning - Part 2: Risk management 2012 CENELEC 0 2870 EN 60317-60 Specifications for particular types of winding wires - Part 60: Polyester glass fibre wound minimum class 155 resin or 2012 CENELEC 0 varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire, temperature index 155 2871 EN 60811-412 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing 2012 CENELEC 0 methods - Ageing in an air bomb 2872 EN 62595-1-2 LCD backlight unit - Part 1-2: Terminology and letter symbols 2012 CENELEC 0 2873 EN 62075 Audio/video, information and communication technology equipment - Environmentally conscious design - Incorporating 2012 CENELEC 0 corrigendum March 2013 2874 EN 62628 Guidance on software aspects of dependability 2012 CENELEC 0 2875 EN 60512-9-2 Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and 2012 CENELEC 0 temperature 2876 EN 50526-1 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters 2012 CENELEC 0 2877 EN 61788-13 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting 2012 CENELEC 0 multifilamentary composites 2878 EN 62132-8 Integrated circuits - Measurement of electromagnetic immunity - Part 8: Measurement of radiated immunity - IC stripline 2012 CENELEC 0 method 2879 EN 60893-3-1 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: 2012 CENELEC 0 Specifications for individual materials - Types of industrial rigid laminated sheets 2880 EN 50083-2 Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for 2012 CENELEC 0 equipment - Incorporates Amendment A1: 2015 2881 EN 60335-1 Household and similar electrical appliances - Safety - Part 1: General requirements - Incorporating Corrigendum January 2012 CENELEC 0 2014; Incorporates Amendment A13: 2017 2882 EN 50581 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous 2012 CENELEC 0 substances 2883 EN 50491-4-1 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems 2012 CENELEC 0 (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Bui 2884 EN 60404-15 Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic 2012 CENELEC 0 materials - Incorporates Amendment A1: 2017 2885 EN 60811-508 Electric and optical fibre cables - Test methods for nonmetallic materials - Part 508: Mechanical tests - Pressure test at high 2012 CENELEC 0 temperature for insulation and sheaths - Incorporates Amendment A1: 2017 2886 EN 61784-5-10 Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10 - 2012 CENELEC 0 Incorporates Amendment A1: 2015 2887 EN 61969-2 Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions 2012 CENELEC 0 2888 EN 60811-404 Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil 2012 CENELEC 0 immersion tests for sheaths 2889 EN 60811-607 Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the 2012 CENELEC 0 assessment of carbon black dispersion in polyethylene and polypropylene 2890 EN 61158-3-21 Industrial communication networks - Fieldbus specifications - Part 3-21: Data-link layer service definition - Type 21 2012 CENELEC 0 elements 2891 EN 60335-2-67 Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for 2012 CENELEC 0 commercial use 2892 EN 61375-3-1 Electronic railway equipment - Train communication network (TCN) - Part 3-1: Multifunction Vehicle Bus (MVB) 2012 CENELEC 0 2893 CLC/TR 50510 Fibre optic access to end-user - A guideline to building of FTTX fibre optic network 2012 CENELEC 0 2894 EN 60794-1-23 Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods 2012 CENELEC 0 2895 EN 50379-1 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - 2012 CENELEC 0 Part 1: General requirements and test methods 2896 EN 50441-4 Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 3 2012 CENELEC 0 2897 EN 61029-2-11 Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench 2012 CENELEC 0 saws - Incorporates Amendment A11: 2013 2898 EN 61300-3-39 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-39: 2012 CENELEC 0 Examinations and measurements - Physical contact (PC) optical connector reference plug selection for return loss measurements 2899 EN 60811-408 Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term 2012 CENELEC 0 stability test of polyethylene and polypropylene compounds 2900 EN 62149-1 Fibre optic active components and devices - Performance standards - Part 1: General and guidance 2012 CENELEC 0 2901 EN 50131-2-7-1 Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) - 2012 CENELEC 0 Incorporates Amendment A2: 2016 2902 EN 60717 Method for the determination of the space required by capacitors and resistors with unidirectional terminations 2012 CENELEC 0 2903 EN 60811-509 Electric and optical fibre cables - Test methods for nonmetallic materials - Part 509: Mechanical tests - Test for resistance 2012 CENELEC 0 of insulations and sheaths to cracking (heat shock test) - Incorporates Amendment A1: 2017 2904 EN 50341-1 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications 2012 CENELEC 0 2905 EN 60695-11-3 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods 2012 CENELEC 0 2906 EN 60544-5 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5: Procedures for assessment of 2012 CENELEC 0 ageing in service 2907 EN 62575-2 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 2: Guidelines for the use 2012 CENELEC 0 2908 EN 61753-061- Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Non-connectorized 2012 CENELEC 0 2 single-mode fibre optic pigtailed isolators for category C - Controlled environment 2909 EN 61182-2-2 Printed board assembly products - Manufacturing description data and transfer methodology - Part 2-2: Sectional 2012 CENELEC 0 requirements for implementation of printed board fabrication data description 2910 EN 61158-4-18 Industrial communication networks - Fieldbus specifications - Part 4-18: Data-link layer protocol specification - Type 18 2012 CENELEC 0 elements 2911 EN 60811-501 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for 2012 CENELEC 0 determining the mechanical properties of insulating and sheathing compounds 2912 EN 62282-3- Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety 2012 CENELEC 0 100 2913 EN 62729 Maritime navigation and radiocommunication equipment and systems - Shipborne equipment for long-range identification 2012 CENELEC 0 and tracking (LRIT) - Performance requirements 2914 EN 60811-513 Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to 2012 CENELEC 0 polyethylene and polypropylene compounds - Wrapping test after conditioning 2915 EN 61300-3-28 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: 2012 CENELEC 0 Examinations and measurements - Transient loss 2916 EN 62047-5 Semiconductor devices - Micro-electromechanical devices - Part 5: RF MEMS switches 2012 CENELEC 0 2917 EN 50149 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires 2012 CENELEC 0 2918 EN 60519-6 Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment 2011 CENELEC 0 2919 EN 62047-12 Semiconductor devices - Micro-electromechanical devices - Part 12: Bending fatigue testing method of thin film materials 2011 CENELEC 0 using resonant vibration of MEMS structures 2920 EN 61869-3 Instrument transformers - Part 3: Additional requirements for inductive voltage transformers 2011 CENELEC 0 2921 EN 50399 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during 2011 CENELEC 0 flame spread test - Test apparatus, procedures, results - Incorporates Amendment A1: 2016 2922 EN 62496-2-2 Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards 2011 CENELEC 0 2923 EN 62386-209 Digital addressable lighting interface - Part 209: Particular requirements for control gear - Colour control (device type 8) 2011 CENELEC 0 2924 EN 50557 Requirements for automatic reclosing devices (ARDs) for circuit breakers- RCBOs-RCCBs for household and similar uses 2011 CENELEC 0 - Remains Currents 2925 EN 61307 Industrial microwave heating installations - Test methods for the determination of power output 2011 CENELEC 0 2926 EN 61029-2-3 Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers 2011 CENELEC 0 2927 EN 62637-2 Battery charging interface for small handheld multimedia devices - Part 2: 2 mm barrel type interface conformance testing 2011 CENELEC 0 2928 EN 60763-1 Laminated pressboard for electrical purposes - Part 1: Definitions, classification and general requirements 2011 CENELEC 0 2929 CLC/TS 60034- Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - 2011 CENELEC 0 31 Application guide - Remains Current 2930 EN 60038 CENELEC standard voltages 2011 CENELEC 0 2931 EN 62253 Photovoltaic pumping systems - Design qualification and performance measurements 2011 CENELEC 0 2932 EN 60300-3-12 Dependability management - Part 3-12: Application guide - Integrated logistic support 2011 CENELEC 0 2933 EN 61851-1 Electric vehicle conductive charging system - Part 1: General requirements - Remains Current 2011 CENELEC 0 2934 EN 61746-1 Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres 2011 CENELEC 0 2935 EN 50525-2-11 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-11: Cables for 2011 CENELEC 0 general applications - Flexible cables with thermoplastic PVC insulation 2936 EN 60461 Time and control code 2011 CENELEC 0 2937 EN 61439-2 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies 2011 CENELEC 0 2938 EN 62047-7 Semiconductor devices - Micro-electromechanical devices - Part 7: MEMS BAW filter and duplexer for radio frequency 2011 CENELEC 0 control and selection 2939 EN 60268-16 Sound System Equipment - Part 16: Objective Rating of Speech Intelligibility by Speech Transmission Index 2011 CENELEC 0 2940 EN 62208 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements 2011 CENELEC 0 2941 EN 60601-2-57 Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser 2011 CENELEC 0 light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use 2942 EN 50563 External a.c. - d.c. and a.c. - a.c. power supplies Determination of no-load power and average efficiency of active modes - 2011 CENELEC 0 Incorporates Amendment A1: 2013 2943 EN 60534-2-1 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions 2011 CENELEC 0 2944 EN 55016-4-2 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and 2011 CENELEC 0 limit modelling - Measurement instrumentation uncertainty - Incorporates Amendment A1: 2014 2945 EN 60671 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing 2011 CENELEC 0 2946 EN 50443 Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high 2011 CENELEC 0 voltage a.c. power supply systems 2947 EN 61747-5-2 Liquid crystal display devices - Part 5-2: Environmental, endurance and mechanical test methods - Visual inspection of 2011 CENELEC 0 active matrix colour liquid crystal display modules 2948 EN 61966-12-1 Multimedia systems and equipment - Colour measurement and management - Part 12-1: Metadata for identification of 2011 CENELEC 0 colour gamut (Gamut ID) 2949 EN 62496-4 Optical circuit boards - Part 4: Interface standards - General and guidance 2011 CENELEC 0 2950 EN 50548 Junction boxes for photovoltaic modules - Incorporates Amendment A2: 2014 2011 CENELEC 0 2951 EN 62520 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters 2011 CENELEC 0 2952 EN 61850-9-2 Communication networks and systems for power utility automation - Part 9-2: Specific communication service mapping 2011 CENELEC 0 (SCSM) - Sampled values over ISO/IEC 8802-3 2953 EN 50525-2-21 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-21: Cables for 2011 CENELEC 0 general applications - Flexible cables with crosslinked elastomeric insulation 2954 EN 61850-4 Communication networks and systems for power utility automation - Part 4: System and project management 2011 CENELEC 0 2955 EN 50122-1 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions 2011 CENELEC 0 against electric shock - Incorporates Amendment A4: 2017, Incorporating Corrigendum November 2012 2956 EN 61199 Single-capped fluorescent lamps - Safety specifications - Incorporates Amendment A2: 2015 2011 CENELEC 0 2957 EN 60130-9 Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment 2011 CENELEC 0 2958 EN 60601-2-46 Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of 2011 CENELEC 0 operating tables 2959 EN 62458 Sound system equipment - Electroacoustic transducers - Measurement of large signal parameters 2011 CENELEC 0 2960 EN 60793-1-30 Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof test 2011 CENELEC 0 2961 EN 60770-1 Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation - Remains Current 2011 CENELEC 0 2962 EN 62637-1 Battery charging interface for small handheld multimedia devices - Part 1: 2 mm barrel interface 2011 CENELEC 0 2963 EN 60679-6 Quartz crystal controlled oscillators of assessed quality - Part 6: Phase jitter measurement method for quartz crystal 2011 CENELEC 0 oscillators and SAW oscillators - Application guidelines 2964 EN 50377-4-4 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2011 CENELEC 0 Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category 2965 EN 61753-087- Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized 2011 CENELEC 0 2 single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment 2966 EN 61162-450 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and 2011 CENELEC 0 multiple listeners - Ethernet interconnection - Incorporates Amendment A1: 2016; Remains Current 2967 EN 60068-2-83 Environmental testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting 2011 CENELEC 0 devices (SMD) by the wetting balance method using solder paste 2968 EN 62258-2 Semiconductor die products - Part 2: Exchange data formats 2011 CENELEC 0 2969 EN 50525-2-81 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-81: Cables for 2011 CENELEC 0 general applications - Cables with crosslinked elastomeric covering for arc welding 2970 EN 61341 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps 2011 CENELEC 0 2971 EN 60793-1-44 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength 2011 CENELEC 0 2972 EN 60601-2-45 Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of 2011 CENELEC 0 mammographic X-ray equipment and mammographic stereotactic devices - Incorporates Amendment A1: 2015 2973 EN 50377-13-2 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2011 CENELEC 0 Part 13-2: Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule categor 2974 EN 61290-4-2 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method 2011 CENELEC 0 2975 EN 60534-8-3 Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method 2011 CENELEC 0 2976 EN 60191-6-17 Mechanical standardization of semiconductor devices - Part 6-17: General rules for the preparation of outline drawings of 2011 CENELEC 0 surface mounted semiconductor device packages - Design guide for stacked packages - Fine-pitch ball grid array and fine- pitch land gr 2977 EN 50533 Railway applications - Three-phase train line voltage characteristics - Incorporates Amendment A1: 2016 2011 CENELEC 0 2978 EN 50525-2-12 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-12: Cables for 2011 CENELEC 0 general applications - Cables with thermoplastic PVC insulation for extensible leads 2979 EN 60512-9-3 Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation 2011 CENELEC 0 (engaging/separating) with electrical load 2980 EN 61853-1 Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance 2011 CENELEC 0 measurements and power rating 2981 EN 61747-6-2 Liquid crystal display devices - Part 6-2: Measuring methods for liquid crystal display modules - Reflective type 2011 CENELEC 0 2982 EN 61378-1 Convertor transformers - Part 1: Transformers for industrial applications 2011 CENELEC 0 2983 EN 62363 Radiation protection instrumentation - Portable photon contamination meters and monitors 2011 CENELEC 0 2984 EN 61029-2-12 Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines 2011 CENELEC 0 2985 EN 60749-21 Semiconductor devices - Mechanical and climatic test methods - Part 21: Solderability 2011 CENELEC 0 2986 EN 60674-3-8 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented 2011 CENELEC 0 polyethylene naphthalate (PEN) films used for electrical insulation - Incorporates Amendment A1: 2017 2987 EN 61058-2-5 Switches for appliances - Part 2-5: Particular requirements for change-over selectors 2011 CENELEC 0 2988 EN 50525-3-11 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-11: Cables 2011 CENELEC 0 with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke 2989 EN 61000-4-15 Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and 2011 CENELEC 0 design specifications 2990 EN 62327 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for 2011 CENELEC 0 the indication of ambient dose equivalent rate from photon radiation 2991 EN 60034-16-1 Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions 2011 CENELEC 0 2992 EN 60268-7 Sound system equipment - Part 7: Headphones and earphones 2011 CENELEC 0 2993 EN 50543 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in 2011 CENELEC 0 indoor ambient air - Requirements and test methods 2994 EN 61558-2-12 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests 2011 CENELEC 0 for constant voltage transformers and power supply units for constant voltage 2995 EN 62047-8 Semiconductor devices - Micro-electromechanical devices - Part 8: Strip bending test method for tensile property 2011 CENELEC 0 measurement of thin films 2996 EN 60695-7-2 Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods 2011 CENELEC 0 2997 EN 50525-2-72 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-72: Cables for 2011 CENELEC 0 general applications - Flat divisible cables (cords) with thermoplastic PVC insulation 2998 EN 61587-2 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets 2011 CENELEC 0 and racks 2999 EN 62386-210 Digital addressable lighting interface - Part 210: Particular requirements for control gear - Sequencer (device type 9) 2011 CENELEC 0 3000 EN 60512-8-2 Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: 2011 CENELEC 0 Static load, axial 3001 EN 62455 Internet protocol (IP) and transport stream (TS) based service access 2011 CENELEC 0 3002 EN 60335-2-53 Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and 2011 CENELEC 0 infrared cabins 3003 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer 2011 CENELEC 0 271 sleevings, flame retarded, fluid resistant, shrink ratio 2:1 3004 EN 60749-29 Semiconductor devices - Mechanical and climatic test methods - Part 29: Latch-up test 2011 CENELEC 0 3005 EN 50467 Railway applications - Rolling stock - Electrical connectors, requirements and test methods 2011 CENELEC 0 3006 EN 61169-35 Radio-frequency connectors - Part 35: Sectional specification for 2,92 series RF connectors 2011 CENELEC 0 3007 EN 50363-0 Insulating, sheathing and covering materials for low-voltage energy cables - Part 0: General introduction 2011 CENELEC 0 3008 EN IEC 62554 Sample preparation for measurement of mercury level in fluorescent lamps - Incorporates Amendment A1: 2018 2011 CENELEC 0 3009 EN 61300-2-6 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - 2011 CENELEC 0 Tensile strength of coupling mechanism 3010 EN 61347-2-3 Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent 2011 CENELEC 0 lamps - Incorporates Amendment A1: 2017 3011 EN 62574 Audio, video and multimedia systems - General channel assignment of multichannel audio 2011 CENELEC 0 3012 EN 60352-8 Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical 2011 CENELEC 0 guidance 3013 EN 61954 Static VAR compensators (SVC) - Testing of thyristor valves - Incorporates Amendment A2: 2017 2011 CENELEC 0 3014 EN 61029-2-5 Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws - Incorporates 2011 CENELEC 0 Amendment A11: 2015 3015 EN 50516-1-1 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - 2011 CENELEC 0 Product specifications - Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the 3016 EN 61988-2-4 Plasma display panels - Part 2-4: Measuring methods - Visual quality: Image artifacts 2011 CENELEC 0 3017 EN 50525-2-83 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-83: Cables for 2011 CENELEC 0 general applications - Multicore cables with crosslinked silicone rubber insulation 3018 CLC/TR 62685 Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functional 2011 CENELEC 0 safety communication profiles (FSCPs) 3019 EN 62459 Sound system equipment - Electroacoustic transducers - Measurement of suspension parts 2011 CENELEC 0 3020 EN 50090-1 Home and Building Electronic Systems (HBES) - Part 1: Standardization structure 2011 CENELEC 0 3021 EN 60115-1 Fixed resistors for use in electronic equipment - Part 1: Generic specification - Incorporates Amendment A11: 2015 2011 CENELEC 0 3022 EN 61400-22 Wind turbines - Part 22: Conformity testing and certification 2011 CENELEC 0 3023 EN 61000-4-22 Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emission and immunity 2011 CENELEC 0 measurements in fully anechoic rooms (FARs) 3024 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin 2011 CENELEC 0 283 sleeving, for bus-bar insulation - Incorporates Amendment A1: 2014 3025 EN 62006 Hydraulic machines - Acceptance tests of small hydroelectric installations 2011 CENELEC 0 3026 EN 50130-4 Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components 2011 CENELEC 0 of fire, intruder, hold up, CCTV, access control and social alarm systems - Incorporates Amendment A1: 2014 3027 EN 60819-3-3 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid 2011 CENELEC 0 (aromatic polyamide) papers 3028 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded 2011 CENELEC 0 116 polychloroprene, general purpose 3029 EN 62509 Battery charge controllers for photovoltaic systems - Performance and functioning 2011 CENELEC 0 3030 EN 50525-2-71 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-71: Cables for 2011 CENELEC 0 general applications - Flat tinsel cables (cords) with thermoplastic PVC insulation 3031 EN 60079-35-1 Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - 2011 CENELEC 0 Construction and testing in relation to the risk of explosion - Incorporating corrigendum September 2011 3032 EN 60512-9-4 Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact 2011 CENELEC 0 retention system and seals (maintenance, ageing) 3033 EN 62040-3 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements 2011 CENELEC 0 3034 EN 62305-4 Protection against lightning - Part 4: Electrical and electronic systems within structures - Incorporating corrigendum 2011 CENELEC 0 November 2016 3035 EN 62244 Radiation protection instrumentation - Installed radiation monitors for the detection of radioactive and special nuclear 2011 CENELEC 0 materials at national borders 3036 EN 61869-5 Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers 2011 CENELEC 0 3037 EN 60079-19 Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation - Incorporates Amendment 1: 2015 2011 CENELEC 0 3038 EN 50536 Protection against lightning - Thunderstorm warning systems - Incorporating corrigendum June 2011; Incorporates 2011 CENELEC 0 Amendment A1: 2012 3039 EN 61169-41 Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors 2011 CENELEC 0 3040 EN 60076-2 Power transformers - Part 2: Temperature rise for liquid-immersed transformers 2011 CENELEC 0 3041 EN 60929 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements - Incorporates 2011 CENELEC 0 Amendment A1: 2016 3042 EN 60505 Evaluation and qualification of electrical insulation systems 2011 CENELEC 0 3043 EN 62271-206 High-voltage switchgear and controlgear - Part 206: Voltage presence indicating systems for rated voltages above 1 kV and 2011 CENELEC 0 up to and including 52 kV 3044 EN 60974-12 Arc welding equipment - Part 12: Coupling devices for welding cables 2011 CENELEC 0 3045 EN 61300-3-46 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: 2011 CENELEC 0 Measurement - Bore diameter for guide pin in MT ferrules 3046 EN 50525-2-82 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-82: Cables for 2011 CENELEC 0 general applications - Cables with crosslinked elastomeric insulation for decorative chains 3047 EN 50132-5-2 Alarm systems - CCTV surveillance systems for use in security applications - Part 5-2: IP Video Transmission Protocols 2011 CENELEC 0 3048 EN 62148-2 Fibre optic active components and devices - Package and interface standards - Part 2: SFF 10-pin transceivers 2011 CENELEC 0 3049 EN 62507-1 Identification systems enabling unambiguous information interchange - Requirements - Part 1: Principles and methods 2011 CENELEC 0 3050 EN 61812-1 Time relays for industrial and residential use - Part 1: Requirements and tests 2011 CENELEC 0 3051 EN 50525-1 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General 2011 CENELEC 0 requirements 3052 EN 62129-2 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength 2011 CENELEC 0 meters 3053 CLC/TS 60034- Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating 2011 CENELEC 0 24 electrical machines and of bearing currents - Application guide 3054 EN 62132-2 Integrated circuits - Measurement of electromagnetic immunity - Part 2: Measurement of radiated immunity - TEM cell and 2011 CENELEC 0 wideband TEM cell method 3055 EN 50551-1 Simplex and duplex cables to be used for cords - Part 1: Blank Detail Specification and minimum requirements 2011 CENELEC 0 3056 EN 50065-1 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, 2011 CENELEC 0 frequency bands and electromagnetic disturbances 3057 CLC/TS 60034- Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound 2011 CENELEC 0 18-33 windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses 3058 EN 61439-1 Low-voltage switchgear and controlgear assemblies - Part 1: General rules 2011 CENELEC 0 3059 EN 61850-7-1 Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles 2011 CENELEC 0 and models 3060 EN 80001-1 Application of risk management for IT-networks incorporating medical devices - Part 1: Roles, responsibilities and 2011 CENELEC 0 activities 3061 EN 61747-6-3 Liquid crystal display devices - Part 6-3: Measuring methods for liquid crystal display modules - Motion artifact 2011 CENELEC 0 measurement of active matrix liquid crystal display modules 3062 EN 60068-3-1 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests 2011 CENELEC 0 3063 EN 50525-2-51 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51: Cables for 2011 CENELEC 0 general applications - Oil resistant control cables with thermoplastic PVC insulation 3064 EN 62524 Multimedia systems and equipment - Multimedia e-publishing and e-books - Readers format for e-publishing 2011 CENELEC 0 3065 EN 60745-2-22 Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines - Incorporates 2011 CENELEC 0 Amendment A11: 2013 3066 EN 61500 Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing 2011 CENELEC 0 category A functions 3067 EN 62660-1 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing 2011 CENELEC 0 3068 EN 50377-4-2 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2011 CENELEC 0 terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full °آPart 4-2: Type SC/APC simplex 8 zirconia ferrule cate 3069 EN 55016-2-2 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of 2011 CENELEC 0 disturbances and immunity - Measurement of disturbance power 3070 EN 62148-3 Fibre optic active components and devices - Package and interface standards - Part 3: SFF 20-pin transceivers 2011 CENELEC 0 3071 EN 50565-1 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V - Part 1: General guidance 2011 CENELEC 0 3072 EN 61788-11 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite 2011 CENELEC 0 superconductors 3073 EN 55017 Methods of measurement of the suppression characteristics of passive EMC filtering devices 2011 CENELEC 0 3074 EN 60534-8-2 Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by 2011 CENELEC 0 hydrodynamic flow through control valves 3075 EN 62305-3 Protection against lightning - Part 3: Physical damage to structures and life hazard 2011 CENELEC 0 3076 CLC/TR 62662 Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials 2011 CENELEC 0 3077 EN 61236 Live working - Saddles, stick clamps and their accessories 2011 CENELEC 0 3078 EN 50132-5-1 Alarm systems - CCTV surveillance systems for use in security applications - Part 5-1: Video transmission - General video 2011 CENELEC 0 transmission performance requirements - Incorporating corrigendum July 2012 3079 CLC/TR 50480 Determination of cross-sectional area of conductors and selection of protective devices 2011 CENELEC 0 3080 EN 62150-2 Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers 2011 CENELEC 0 3081 EN 50411-6-1 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 6-1: 2011 CENELEC 0 Unprotected microduct for category S and A 3082 EN 62516-2 Terrestrial digital multimedia broadcasting (T-DMB) receivers - Part 2: Interactive data services using BIFS 2011 CENELEC 0 3083 EN 61169-40 Radio-frequency connectors - Part 40: Sectional specification for 2.4 series RF connectors 2011 CENELEC 0 3084 EN 61076-2- Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for 2011 CENELEC 0 106 connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 3085 EN 62562 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates 2011 CENELEC 0 3086 EN 61000-3-12 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected 2011 CENELEC 0 to public low-voltage systems with input current > 16 A and â_¤ 75 A per phase 3087 EN 61058-2-1 Switches for appliances - Part 2-1: Particular requirements for cord switches 2011 CENELEC 0 3088 EN 61558-2-20 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests 2011 CENELEC 0 for small reactors 3089 EN 50377-16-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2011 CENELEC 0 Part 16-1: Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule fo 3090 EN 62047-10 Semiconductor devices - Micro-electromechanical devices - Part 10: Micro-pillar compression test for MEMS materials 2011 CENELEC 0 3091 EN 61000-4-21 Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test 2011 CENELEC 0 methods 3092 EN 61850-8-1 Communication networks and systems for power utility automation - Part 8-1: Specific communication service mapping 2011 CENELEC 0 (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 3093 EN 50525-2-42 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-42: Cables for 2011 CENELEC 0 general applications - Single core non-sheathed cables with crosslinked EVA insulation 3094 EN 61788-6 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite 2011 CENELEC 0 superconductors 3095 EN 60704-2-10 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10: 2011 CENELEC 0 Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these 3096 EN 62549 Articulated systems and flexible systems for cable guiding 2011 CENELEC 0 3097 EN 61169-19 Radio-frequency connectors - Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB 2011 CENELEC 0 3098 EN 61558-2-9 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests 2011 CENELEC 0 for transformers and power supply units for class III handlamps for tungsten filament lamps 3099 EN 62047-9 Semiconductor devices - Micro-electromechanical devices - Part 9: Wafer to wafer bonding strength measurement for 2011 CENELEC 0 MEMS 3100 EN 60252-2 AC motor capacitors - Part 2: Motor start capacitors - Incorporates Amendment A1: 2013 2011 CENELEC 0 3101 EN 61881-1 Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 1: Paper/plastic film capacitors 2011 CENELEC 0 3102 EN 61300-2-5 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - 2011 CENELEC 0 Torsion 3103 EN 60684-2 Flexible insulating sleeving - Part 2: Methods of test 2011 CENELEC 0 3104 EN 61169-39 Radio-frequency connectors - Part 39: Sectional specification for CQM series quick lock RF connectors 2011 CENELEC 0 3105 EN 62341-6-1 Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters 2011 CENELEC 0 3106 EN 61557-13 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2011 CENELEC 0 or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leaka 3107 EN 60749-7 Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the 2011 CENELEC 0 analysis of other residual gases 3108 EN 62481-3 Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 3: Link protection 2011 CENELEC 0 3109 EN 61394 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors 2011 CENELEC 0 3110 EN 60695-7-3 Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results 2011 CENELEC 0 3111 EN 61300-3-45 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: 2011 CENELEC 0 Examinations and measurements - Attenuation of random mated multi-fibre connectors 3112 EN 62532 Fluorescent induction lamps - Safety specifications - Incorporates Amendment A1: 2017 2011 CENELEC 0 3113 EN 62305-1 Protection against lightning - Part 1: General principles 2011 CENELEC 0 3114 EN 60204-33 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment 2011 CENELEC 0 3115 EN 61076-2- Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification 2011 CENELEC 0 001 3116 EN 61967-8 Integrated circuits - Measurement of electromagnetic emissions - Part 8: Measurement of radiated emissions - IC stripline 2011 CENELEC 0 method 3117 EN 61386-25 Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices 2011 CENELEC 0 3118 EN 61960 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for 2011 CENELEC 0 portable applications - Remains Current 3119 EN 60512-17-2 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp 2011 CENELEC 0 resistance to cable rotation 3120 EN 50525-2-31 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-31: Cables for 2011 CENELEC 0 general applications - Single core non-sheathed cables with thermoplastic PVC insulation 3121 EN 50545-1 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels Part 1: 2011 CENELEC 0 General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides - Incorporate 3122 EN 61753-086- Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized 2011 CENELEC 0 6 single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment 3123 EN 62464-2 Magnetic resonance equipment for medical imaging - Part 2: Classification criteria for pulse sequences 2011 CENELEC 0 3124 EN 62359 Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to 2011 CENELEC 0 medical diagnostic ultrasonic fields - Incorporates Amendment A1: 2018 3125 EN 50525-3-31 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-31: Cables 2011 CENELEC 0 with special fire performance - Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke 3126 EN 60191-6-12 Mechanical standardization of semiconductor devices - Part 6-12: General rules for the preparation of outline drawings of 2011 CENELEC 0 surface mounted semiconductor device packages - Design guidelines for fine-pitch land grid array (FLGA) 3127 EN 61300-2-23 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - 2011 CENELEC 0 Sealing for non-pressurized closures of fibre optic devices 3128 EN 61300-3-22 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-22: 2011 CENELEC 0 Examinations and measurements - Ferrule compression force 3129 EN 60747-5-5 Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers - Incorporates Amendment 2011 CENELEC 0 A1: 2015 3130 EN 50411-3-2 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-2: 2011 CENELEC 0 Singlemode mechanical fibre splice 3131 EN 50564 Electrical and electronic household and office equipment - Measurement of low power consumption 2011 CENELEC 0 3132 EN 62631-1 Dielectric and resistive properties of solid insulating materials - Part 1: General 2011 CENELEC 0 3133 EN 60076-16 Power transformers - Part 16: Transformers for wind turbines applications 2011 CENELEC 0 3134 EN 60567 Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance 2011 CENELEC 0 3135 EN 61534-1 Powertrack systems - Part 1: General requirements - Incorporates Amendment A1: 2014 2011 CENELEC 0 3136 EN 50377-15-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2011 CENELEC 0 Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre 3137 EN 60695-11-4 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method 2011 CENELEC 0 3138 EN 61988-1 Plasma display panels - Part 1: Terminology and letter symbols 2011 CENELEC 0 3139 EN 61821 Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant 2011 CENELEC 0 current series circuits 3140 EN 50377-13-3 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2011 CENELEC 0 Part 13-3: Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule catego 3141 EN 62149-5 Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and 2011 CENELEC 0 CDR ICs 3142 EN 60060-2 High-voltage test techniques - Part 2: Measuring systems 2011 CENELEC 0 3143 EN 61788-15 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films 2011 CENELEC 0 at microwave frequencies 3144 EN 50550 Power frequency overvoltage protective device for household and similar applications (POP) - Incorporates Amendment 2011 CENELEC 0 A1: 2014 3145 EN 50216-12 Power transformer and reactor fittings - Part 12: Fans 2011 CENELEC 0 3146 EN 60728-6 Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment 2011 CENELEC 0 3147 EN 60601-2-4 Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac 2011 CENELEC 0 defibrillators 3148 EN 62271-204 High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV 2011 CENELEC 0 3149 EN 140401-804 Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 - 2011 CENELEC 0 Incorporating corrigenda October 2011 and January 2012; Incorporates Amendment A1: 2013 3150 EN 50377-7-4 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2011 CENELEC 0 Part 7-4: LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C 3151 EN 62216 Digital terrestrial television receivers for the DVB-T system 2011 CENELEC 0 3152 EN 60904-5 Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the 2011 CENELEC 0 open-circuit voltage method 3153 EN 60269-6 Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy 2011 CENELEC 0 systems 3154 EN 62376 Maritime navigation and radiocommunication equipment and systems - Electronic chart system (ECS) - Operational and 2011 CENELEC 0 performance requirements, methods of testing and required test results 3155 EN 60603-7-1 Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors 2011 CENELEC 0 3156 EN 50516-2-1 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - 2011 CENELEC 0 Product specifications - Part 2-1: Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the r 3157 EN 62660-2 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing 2011 CENELEC 0 3158 EN 60475 Method of sampling insulating liquids 2011 CENELEC 0 3159 EN 62271-103 High-voltage switchgear and controlgear - Part 103: Switches for rated voltages above 1 kV up to and including 52 kV 2011 CENELEC 0 3160 EN 62496-3 Optical circuit boards - Part 3: Performance standards - General and guidance 2011 CENELEC 0 3161 EN 50525-2-22 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-22: Cables for 2011 CENELEC 0 general applications - High flexibility braided cables with crosslinked elastomeric insulation 3162 EN 60974-13 Arc welding equipment - Part 13: Welding clamp 2011 CENELEC 0 3163 EN 50525-3-21 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-21: Cables 2011 CENELEC 0 with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke 3164 EN 60118-13 Electroacoustics - Hearing aids - Part 13: Electromagnetic compatibility (EMC) 2011 CENELEC 0 3165 EN 62271-106 High-voltage switchgear and controlgear - Part 106: Alternating current contactors, contactor-based controllers and motor- 2011 CENELEC 0 starters 3166 EN 60749-40 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge 2011 CENELEC 0 3167 EN 50525-3-41 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-41: Cables 2011 CENELEC 0 with special fire performance - Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke 3168 EN 61076-2 Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors 2011 CENELEC 0 3169 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 205: Heat-shrinkable 2011 CENELEC 0 205 chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1 3170 EN 50525-2-41 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-41: Cables for 2011 CENELEC 0 general applications - Single core cables with crosslinked silicone rubber insulation 3171 EN 61937-10 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 10: Non-linear PCM 2011 CENELEC 0 bitstreams according to the MPEG-4 Audio Lossless Coding (ALS) format 3172 EN 60076-1 Power transformers - Part 1: General 2011 CENELEC 0 3173 EN 60745-2-3 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type 2011 CENELEC 0 sanders - Incorporates Amendment A13: 2015 3174 EN 61753-131- Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical 2011 CENELEC 0 3 fibre splice for category U - Uncontrolled environment 3175 EN 61850-7-3 Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common 2011 CENELEC 0 data classes 3176 EN 50411-3-3 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-3: 2011 CENELEC 0 Singlemode optical fibre fusion splice protectors 3177 EN 61169-18 Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA 2011 CENELEC 0 3178 EN 61300-2-17 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - 2011 CENELEC 0 Cold 3179 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable polyolefin 2011 CENELEC 0 247 sleeving, dual wall, not flame retarded, thick and medium wall - Incorporates Amendment A1: 2017 3180 EN 60763-3-1 Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for 2011 CENELEC 0 laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2 3181 EN 61784-3-18 Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 2011 CENELEC 0 18 - Incorporates Amendment A1: 2017 3182 EN 61753-141- Fibre optic interconnecting devices and passive components - Performance standard - Part 141-2: Fibre optic passive 2011 CENELEC 0 2 chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments 3183 EN 60212 Standard conditions for use prior to and during the testing of solid electrical insulating materials 2011 CENELEC 0 3184 EN 50130-5 Alarm systems - Part 5: Environmental test methods 2011 CENELEC 0 3185 EN 50128 Railway applications - Communication, signalling and processing systems - Software for railway control and protection 2011 CENELEC 0 systems - Incorporating corrigendum February 2014 3186 EN 62109-2 Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters 2011 CENELEC 0 3187 EN 60252-1 AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation 2011 CENELEC 0 and operation - Incorporates Amendment A1: 2013 3188 EN 60794-2-10 Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables 2011 CENELEC 0 3189 EN 62496-2-1 Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation 2011 CENELEC 0 3190 EN 61280-1-3 Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength 2010 CENELEC 0 and spectral width measurement 3191 EN 50132-1 Alarm systems - CCTV surveillance systems for use in security applications - Part 1: System requirements - Incorporating 2010 CENELEC 0 corrigendum June 2010 3192 CLC/TS 50131- Alarm systems - Intrusion and hold-up systems - Part 7: Application guidelines 2010 CENELEC 0 7 3193 EN 61386-24 Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground 2010 CENELEC 0 3194 EN 62395-2 Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system 2010 CENELEC 0 design, installation and maintenance 3195 EN 62502 Analysis techniques for dependability - Event tree analysis (ETA) 2010 CENELEC 0 3196 EN 61508-3 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements 2010 CENELEC 0 3197 EN 62058-21 Electricity metering equipment (a.c.) - Acceptance inspection - Part 21: Particular requirements for electromechanical 2010 CENELEC 0 meters for active energy (classes 0,5, 1 and 2 and class indexes A and B) 3198 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 281: Heat-shrinkable, polyolefin 2010 CENELEC 0 281 sleeving, semiconductive 3199 EN 60034-1 Rotating electrical machines - Part 1: Rating and performance - Incorporating Corrigendum October 2010 2010 CENELEC 0 3200 EN 61850-6 Communication networks and systems for power utility automation - Part 6: Configuration description language for 2010 CENELEC 0 communication in electrical substations related to IEDs 3201 EN 60730-2-7 Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches 2010 CENELEC 0 - Incorporating corrigendum December 2011 3202 EN 60512-19-1 Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid 2010 CENELEC 0 resistance of pre-insulated crimp barrels 3203 EN 60255-11 Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary 2010 CENELEC 0 power supply port 3204 EN 60191-6-18 Mechanical standardization of semiconductor devices - Part 6-18: General rules for the preparation of outline drawings of 2010 CENELEC 0 surface mounted semiconductor device packages - Design guide for ball grid array (BGA) 3205 EN 60317-57 Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220 2010 CENELEC 0 3206 EN 50325-5 Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 5: Functional 2010 CENELEC 0 safety communication based on EN 50325-4 3207 EN 61558-2-8 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests 2010 CENELEC 0 for transformers and power supply units for bells and chimes 3208 EN 60794-3-11 Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried and lashed aerial single- 2010 CENELEC 0 mode optical fibre telecommunication cables 3209 EN 61508-1 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements 2010 CENELEC 0 3210 CLC/TR 50555 Interruption indexes 2010 CENELEC 0 3211 EN 62439-1 Industrial communication networks - High availability automation networks - Part 1: General concepts and calculation 2010 CENELEC 0 methods - Incorporates Amendment A2: 2017 3212 EN 60546-2 Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine 2010 CENELEC 0 testing 3213 EN 55024 Information technology equipment - Immunity characteristics - Limits and methods of measurement - Incorporates 2010 CENELEC 0 Amendment A1: 2015; Remains Current 3214 EN 60335-2-7 Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines - Incorporates 2010 CENELEC 0 Amendment A11: 2013 3215 EN 60695-2-13 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method 2010 CENELEC 0 for materials - Incorporates Amendment A1: 2014 3216 EN 60749-15 Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through- 2010 CENELEC 0 hole mounted devices - Incorporating corrigendum February 2011 3217 EN 61788-8 Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed 2010 CENELEC 0 to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method 3218 EN 61753-121- Fibre optic interconnecting devices and passive components - Performance standard - Part 121-3: Simplex and duplex cords 2010 CENELEC 0 3 with single-mode fibre and cylindrical ferrule connectors for category U - Uncontrolled environment 3219 EN 55016-1-1 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and 2010 CENELEC 0 immunity measuring apparatus - Measuring apparatus - Incorporates Amendment A2: 2014 3220 EN 60534-7 Industrial-process control valves - Part 7: Control valve data sheet 2010 CENELEC 0 3221 EN 50122-2 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the 2010 CENELEC 0 effects of stray currents caused by d.c. traction systems 3222 EN 61784-3-1 Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1 2010 CENELEC 0 3223 EN 62475 High-current test techniques - Definitions and requirements for test currents and measuring systems 2010 CENELEC 0 3224 EN 60349-1 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter- 2010 CENELEC 0 fed alternating current motors 3225 EN 60335-2-89 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating 2010 CENELEC 0 appliances with an incorporated or remote refrigerant condensing unit or compressor - Incorporates Amendment A2: 2017 3226 EN 61191-6 Printed board assemblies - Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement 2010 CENELEC 0 method 3227 EN 60512-7-1 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall 2010 CENELEC 0 (repeated) 3228 EN 60603-7-7 Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data 2010 CENELEC 0 transmission with frequencies up to 600 MHz 3229 EN 62041 Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements 2010 CENELEC 0 3230 EN 50529-1 EMC Network Standard - Part 1: Wire-line telecommunications networks using telephone wires 2010 CENELEC 0 3231 EN 50522 Earthing of power installations exceeding 1 kV a.c. 2010 CENELEC 0 3232 EN 50491-5-2 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems 2010 CENELEC 0 (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment 3233 EN 61099 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes 2010 CENELEC 0 3234 EN 62209-2 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human 2010 CENELEC 0 models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices 3235 EN 60728-13 Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal 2010 CENELEC 0 transmissions 3236 EN 60079-29-4 Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases 2010 CENELEC 0 3237 EN 61666 Industrial systems, installations and equipment and industrial products - Identification of terminals within a system 2010 CENELEC 0 3238 CLC/TS 61850- Communication networks and systems for power utility automation - Part 80-1: Guideline to exchanging information from 2010 CENELEC 0 80-1 a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104 3239 EN 61784-3-14 Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 2010 CENELEC 0 14 3240 EN 60964 Nuclear power plants - Control rooms - Design 2010 CENELEC 0 3241 EN 60512-21-1 Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt 2010 CENELEC 0 resistance 3242 EN 61508-2 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for 2010 CENELEC 0 electrical/electronic/programmable electronic safety-related systems 3243 EN 61029-2-8 Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders 2010 CENELEC 0 3244 EN 62490-1 ESL measuring method - Part 1: Capacitors with lead terminal for use in electronic equipment 2010 CENELEC 0 3245 EN 60512-17-4 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp 2010 CENELEC 0 resistance to cable torsion 3246 EN 62439-4 Industrial communication networks - High availability automation networks - Part 4: Cross-network Redundancy Protocol 2010 CENELEC 0 (CRP) - Incorporates Amendment A1: 2012 3247 EN 62058-11 Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods 2010 CENELEC 0 3248 EN 60730-2-15 Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air 2010 CENELEC 0 flow, water flow and water level sensing controls 3249 EN 60027-7 Letter symbols to be used in electrical technology - Part 7: Power generation, transmission and distribution 2010 CENELEC 0 3250 CLC/TS 50537- Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for traction 2010 CENELEC 0 3 converters 3251 EN 50104 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods 2010 CENELEC 0 3252 EN 60745-2-16 Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers 2010 CENELEC 0 3253 EN 61300-2-21 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - 2010 CENELEC 0 Composite temperature/humidity cyclic test 3254 EN 60546-1 Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating the 2010 CENELEC 0 performance 3255 EN 62317-2 Ferrite cores - Dimensions - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications - 2010 CENELEC 0 Incorporating Corrigendum August 2010 3256 EN 60317-12 Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120 2010 CENELEC 0 3257 EN 60603-7-41 Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for 2010 CENELEC 0 data transmissions with frequencies up to 500 MHz 3258 EN 61937-12 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 12: Non-linear PCM 2010 CENELEC 0 bitstreams according to the DRA formats 3259 EN 62329-3- Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and 2010 CENELEC 0 100 compatibility performance - Sheet 100: Heat-shrinkable moulded shape dimensions 3260 EN 60318-4 Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones 2010 CENELEC 0 coupled to the ear by means of ear inserts 3261 EN 60904-10 Photovoltaic devices - Part 10: Methods of linearity measurement 2010 CENELEC 0 3262 EN 60335-2-2 Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water- 2010 CENELEC 0 suction cleaning appliances - Incorporates Amendment A1: 2013 3263 EN 60512-9-5 Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic 2010 CENELEC 0 3264 EN 60146-1-1 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic 2010 CENELEC 0 requirements 3265 CLC/TR 50538 Guide to EMC Directive conformity of equipment designed for military purposes 2010 CENELEC 0 3266 EN 50159 Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission 2010 CENELEC 0 systems 3267 EN 31010 Risk management - Risk assessment techniques 2010 CENELEC 0 3268 EN 60512-9-1 Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation 2010 CENELEC 0 3269 EN 60264-4-1 Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials 2010 CENELEC 0 3270 EN 60368-3 Piezoelectric filters of assessed quality - Part 3: Standard outlines and lead connections 2010 CENELEC 0 3271 EN 60384-26-1 Fixed capacitors for use in electronic equipment - Part 26-1: Blank detail specification - Fixed aluminum electrolytic 2010 CENELEC 0 capacitors with conductive polymer solid electrolyte - Assessment level EZ 3272 EN 60645-6 Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions 2010 CENELEC 0 3273 EN 50206-2 Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail 2010 CENELEC 0 vehicles 3274 EN 61760-3 Surface mounting technology - Part 3: Standard method for the specification of components for Through Hole Reflow 2010 CENELEC 0 (THR) soldering 3275 EN 60603-7-51 Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for 2010 CENELEC 0 data transmissions with frequencies up to 500 MHz 3276 EN 60601-2-33 Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic 2010 CENELEC 0 resonance equipment for medical diagnosis - Incorporating Corrigendum October 2010; Incorporates Amendment A12: 2016 3277 EN 60335-2- Household and similar electrical appliances - Safety Part 2-105: Particular requirements for multifunctional shower 2010 CENELEC 0 105 cabinets 3278 EN 50498 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles 2010 CENELEC 0 3279 EN 60335-2-4 Household and similar electrical appliances Safety Part 2-4: Particular requirements for spin extractors - Incorporates 2010 CENELEC 0 Amendment A11: 2018 3280 EN 61754-24 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24: Type SC-RJ 2010 CENELEC 0 connector family 3281 EN 60645-7 Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses 2010 CENELEC 0 3282 EN 60730-2-9 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing 2010 CENELEC 0 controls 3283 EN 60745-2-1 Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills - Remains 2010 CENELEC 0 Current 3284 EN 61010-2- Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular 2010 CENELEC 0 030 requirements for testing and measuring circuits 3285 EN 50529-2 EMC Network Standard - Part 2: Wire-line telecommunications networks using coaxial cables 2010 CENELEC 0 3286 EN 62329-3- Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and 2010 CENELEC 0 102 compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance 3287 EN 60317-58 Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 2010 CENELEC 0 220 3288 EN 61558-2-23 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests 2010 CENELEC 0 for transformers and power supply units for construction sites 3289 EN 61907 Communication network dependability engineering 2010 CENELEC 0 3290 CLC/TR 50485 Electromagnetic compatibility - Emission measurements in fully anechoic chambers 2010 CENELEC 0 3291 EN 61373 Railway applications - Rolling stock equipment - Shock and vibration tests 2010 CENELEC 0 3292 EN 60709 Nuclear power plants - Instrumentation and control systems important to safety - Separation 2010 CENELEC 0 3293 CLC/TS 50537- Railway applications - Mounted parts of the traction transformer and cooling system - Part 2: Pump for insulating liquid for 2010 CENELEC 0 2 traction transformers and reactors 3294 EN 62058-31 Electricity metering equipment (a.c.) - Acceptance inspection - Part 31: Particular requirements for static meters for active 2010 CENELEC 0 energy (classes 0,2 S, 0,5 S, 1 and 2, and class indexes A, B and C) 3295 EN 62374-1 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers - Incorporating 2010 CENELEC 0 Corrigendum April 2011 3296 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 282: Heat-shrinkable, polyolefin 2010 CENELEC 0 282 sleeving - Stress control 3297 EN 60079-20-1 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data 2010 CENELEC 0 3298 EN 61508-4 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and 2010 CENELEC 0 abbreviations 3299 EN 60335-2- Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment 2010 CENELEC 0 109 appliances - Incorporates Amendment A2: 2018 3300 EN 60335-2-77 Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind 2010 CENELEC 0 electrically powered lawn mowers 3301 EN 62514 Multimedia gateway in home networks - Guidelines 2010 CENELEC 0 3302 EN 61076-3- Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for 2010 CENELEC 0 115 protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments 3303 EN 60068-2-53 Environmental testing - Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic 2010 CENELEC 0 (vibration/shock) tests 3304 EN 60695-2-12 Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method 2010 CENELEC 0 for materials - Incorporates Amendment A1: 2014 3305 EN 61784-3-6 Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6 2010 CENELEC 0 3306 EN 50386 Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers - Incorporates Amendment A1: 2013 2010 CENELEC 0 3307 CLC/TS 50537- Railway applications - Mounted parts of the traction transformer and cooling system - Part 4: Gas and liquid actuated 2010 CENELEC 0 4 (Buchholz) relay for liquid immersed transformers and reactors with conservator for rail vehicles 3308 EN 60947-4-1 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and 2010 CENELEC 0 motor-starters - Incorporates Amendment A1: 2012 3309 EN 61975 High-voltage direct current (HVDC) installations - System tests - Incorporates Amendment A1: 2017 2010 CENELEC 0 3310 EN 60191-6-20 Mechanical standardization of semiconductor devices - Part 6-20: General rules for the preparation of outline drawings of 2010 CENELEC 0 surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ) 3311 EN 60770-2 Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing - Remains 2010 CENELEC 0 Current 3312 EN 60512-20-1 Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, 2010 CENELEC 0 needle-flame 3313 EN 50377-8-13 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2010 CENELEC 0 Part 8-13: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for 3314 EN 60745-2-2 Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches - 2010 CENELEC 0 Remains Current 3315 EN 50160 Voltage characteristics of electricity supplied by public electricity networks - Incorporating Corrigendum December 2010; 2010 CENELEC 0 Incorporates Amendment A1: 2015 3316 EN 60666 Detection and determination of specified additives in mineral insulating oils 2010 CENELEC 0 3317 EN 60603-7-2 Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for 2010 CENELEC 0 data transmissions with frequencies up to 100 MHz 3318 EN 62614 Fibre optics - Launch condition requirements for measuring multimode attenuation 2010 CENELEC 0 3319 EN 50181 Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2,50 kA for equipment other than liquid filled 2010 CENELEC 0 transformers 3320 EN 60704-1 Household and similar electrical appliances - Test code for the determination of airborne noise - Part 1: General 2010 CENELEC 0 requirements - Incorporates Amendment A1: 2012 3321 EN 60401-2 Terms and nomenclature for cores made of magnetically soft ferrites - Part 2: Reference of dimensions 2010 CENELEC 0 3322 EN 60335-2-13 Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and 2010 CENELEC 0 similar appliances - Incorporates Amendment A11: 2012 3323 EN 50206-1 Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 1: Pantographs for main line vehicles 2010 CENELEC 0 3324 EN 62150-4 Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a 2010 CENELEC 0 time-domain optical detection system 3325 EN 60512-22-1 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance 2010 CENELEC 0 3326 EN 60601-2-43 Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray 2010 CENELEC 0 equipment for interventional procedures - Incorporates Amendment A1: 2018 3327 EN 61977 Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification 2010 CENELEC 0 3328 EN 50342-5 Lead-acid starter batteries - Part 5: Properties of battery housings and handles 2010 CENELEC 0 3329 EN 62508 Guidance on human aspects of dependability 2010 CENELEC 0 3330 CLC/TS 50539- Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 22: Selection 2010 CENELEC 0 22 and application principles - Wind turbine applications 3331 EN 62490-2 ESL measuring method - Part 2: Surface mount capacitors for use in electronic equipment 2010 CENELEC 0 3332 EN 60603-7-71 Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for 2010 CENELEC 0 data transmission with frequencies up to 1 000 MHz 3333 EN 60974-11 Arc welding equipment - Part 11: Electrode holders 2010 CENELEC 0 3334 EN 62537 Interface for loudspeakers with digital input signals based on IEC 60958 2010 CENELEC 0 3335 EN 61753-111- Fibre optic interconnecting devices and passive components performance standard - Part 111-7: Sealed closures for 2010 CENELEC 0 7 category A - Aerial 3336 EN 60601-1-6 Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral 2010 CENELEC 0 standard: Usability - Incorporates Amendment A1: 2015 3337 EN 60749-34 Semiconductor devices - Mechanical and climatic test methods - Part 34: Power cycling 2010 CENELEC 0 3338 EN 61169-14 Radio-frequency connectors - Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw 2010 CENELEC 0 coupling - Characteristic impedance 75 ohms (Type 3,5/12) 3339 CLC/TR 50173- Information technology - Implementation of BCT applications using cabling in accordance with EN 50173-4 2010 CENELEC 0 99-2 3340 EN 60335-2-24 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice- 2010 CENELEC 0 cream appliances and ice makers 3341 EN 61076-2- Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors 2010 CENELEC 0 107 M12 with electrical and fibre-optic contacts with screw locking 3342 EN 62047-6 Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials 2010 CENELEC 0 3343 EN 60191-6-21 Mechanical standardization of semiconductor devices - Part 6-21: General rules for the preparation of outline drawings of 2010 CENELEC 0 surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages (SOP) 3344 EN 60512-20-3 Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, 2010 CENELEC 0 glow-wire 3345 EN 61249-2-41 Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - 2010 CENELEC 0 Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper- 3346 EN 60891 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics 2010 CENELEC 0 3347 EN 61400-24 Wind turbines - Part 24: Lightning protection 2010 CENELEC 0 3348 EN 50377-8-10 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2010 CENELEC 0 Part 8-10: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule fo 3349 CLC/TR 62541- OPC unified architecture - Part 2: Security model 2010 CENELEC 0 2 3350 EN 61280-1-4 Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source 2010 CENELEC 0 encircled flux measurement method 3351 EN 62340 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with Common 2010 CENELEC 0 Cause Failure (CCF) 3352 EN 50340 Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV 2010 CENELEC 0 3353 EN 60349-2 Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating 2010 CENELEC 0 current motors 3354 EN 60745-2-5 Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws - Remains Current 2010 CENELEC 0 3355 EN 60745-2-6 Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers 2010 CENELEC 0 3356 EN 60613 Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis 2010 CENELEC 0 3357 EN 50530 Overall efficiency of grid connected photovoltaic inverters - Incorporates Amendment A1: 2013 2010 CENELEC 0 3358 EN 62489-1 Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and 2010 CENELEC 0 specifying the performance of system components - Incorporates Amendment A2: 2018 3359 EN 60704-2-2 Household and similar appliances - Test code for the determination of airborne acoustical noise - Part 2-2: Particular 2010 CENELEC 0 requirements for fan heaters 3360 EN 61788-14 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads 2010 CENELEC 0 designed for powering superconducting devices 3361 EN 61076-3- Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for 2010 CENELEC 0 118 a 4 pole + PE power connector with push-pull coupling 3362 EN 61850-7-2 Communication networks and systems for power utility automation - Part 7-2: Basic information and communication 2010 CENELEC 0 structure - Abstract communication service interface (ACSI) 3363 EN 60601-2-52 Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical 2010 CENELEC 0 beds - Incorporating Corrigendum April 2011; Incorporates Amendment A1: 2015 3364 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin 2010 CENELEC 0 280 sleeving, anti-tracking - Incorporates Amendment A1: 2014 3365 EN 60060-1 High-voltage test techniques - Part 1: General definitions and test requirements 2010 CENELEC 0 3366 EN 60034-2-2 Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - 2010 CENELEC 0 Supplement to IEC 60034-2-1 3367 EN 60695-7-1 Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance 2010 CENELEC 0 3368 EN 61508-6 Functional safety of electrical/electronic/programmable electronic safetyrelated systems - Part 6: Guidelines on the 2010 CENELEC 0 application of IEC 61508-2 and IEC 61508-3 3369 EN 50085-2-3 Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted 2010 CENELEC 0 cable trunking systems intended for installation in cabinets 3370 EN 62258-1 Semiconductor die products - Part 1: Procurement and use 2010 CENELEC 0 3371 CLC/TR 62541- OPC unified architecture - Part 1: Overview and concepts 2010 CENELEC 0 1 3372 CLC/TS 50535 Railway applications - Onboard auxiliary power converter systems 2010 CENELEC 0 3373 EN 62479 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human 2010 CENELEC 0 exposure to electromagnetic fields (10 MHz to 300 GHz) 3374 EN 50495 Safety devices required for the safe functioning of equipment with respect to explosion risks 2010 CENELEC 0 3375 EN 61753-111- Fibre optic interconnecting devices and passive components performance standard - Part 111-8: Sealed closures for 2010 CENELEC 0 8 category G - Ground 3376 EN 60079-15 Explosive atmospheres - Part 15: Equipment protection by type of protection "n" - Remains Current 2010 CENELEC 0 3377 EN 61512-4 Batch control - Part 4: Batch production records 2010 CENELEC 0 3378 EN 55016-1-4 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and 2010 CENELEC 0 immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements - Incorporates Amendment A2: 2017 3379 EN 60793-1-31 Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength 2010 CENELEC 0 3380 EN 60939-1 Passive filter units for electromagnetic interference suppression - Part 1: Generic specification 2010 CENELEC 0 3381 EN 60909-3 Short-circuit currents in three-phase a.c systems - Part 3: Currents during two separate simultaneous line-to-earth short- 2010 CENELEC 0 circuits and partial short-circuit currents flowing through earth 3382 EN 61231 International lamp coding system (ILCOS) - Incorporates Amendment A1: 2013 2010 CENELEC 0 3383 EN 50291-2 Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous 2010 CENELEC 0 operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test met 3384 EN 61936-1 Power installations exceeding 1 kV a.c. - Part 1: Common rules - Incorporates Amendment A1: 2014 2010 CENELEC 0 3385 EN 50191 Erection and operation of electrical test equipment 2010 CENELEC 0 3386 EN 62616 Maritime navigation and radiocommunication equipment and systems - Bridge navigational watch alarm system (BNWAS) 2010 CENELEC 0 3387 EN 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements 2010 CENELEC 0 3388 EN 61935-2 Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 2010 CENELEC 0 11801 and related standards 3389 EN 61097-14 Global maritime distress and safety system (GMDSS) - Part 14: AIS Search And Rescue Transmitter (AIS-SART) - 2010 CENELEC 0 Operational and performance requirements, methods of testing and required test results 3390 EN 61210 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements 2010 CENELEC 0 3391 EN 50491-5-1 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems 2010 CENELEC 0 (BACS) - Part 5-1: EMC requirements, conditions and test set-up 3392 EN 60512-8-1 Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: 2010 CENELEC 0 Static load, transverse 3393 EN 62109-1 Safety of power converters for use in photovoltaic power systems - Part 1: General requirements 2010 CENELEC 0 3394 EN 50397-3 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 2010 CENELEC 0 kV a.c. - Part 3: Guide to use 3395 EN 61558-2-5 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests 2010 CENELEC 0 for transformer for shavers, power supply units for shavers and shaver supply units 3396 EN 60317-13 Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide 2010 CENELEC 0 enamelled round copper wire, class 200 3397 EN 50110-2 Operation of electrical installations - Part 2: National annexes 2010 CENELEC 0 3398 EN 62417 Semiconductor devices - Mobile ion tests for metal-oxide semiconductor field effect transistors (MOSFETs) 2010 CENELEC 0 3399 EN 60191-6-19 Mechanical standardization of semiconductor devices - Part 6-19: Measurement methods of the package warpage at 2010 CENELEC 0 elevated temperature and the maximum permissible warpage 3400 EN 60793-1-41 Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth 2010 CENELEC 0 3401 EN 60122-3 Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections 2010 CENELEC 0 3402 CLC/TS 50544 Low voltage d.c. surge protective device for traction systems - Selection and application rules for surge arresters 2010 CENELEC 0 3403 EN 62496-3-1 Optical circuit boards - Performance standard - Part 3-1: Flexible optical circuit boards using unconnectorized optical glass 2010 CENELEC 0 fibres 3404 EN 62416 Semiconductor devices - Hot carrier test on MOS transistors 2010 CENELEC 0 3405 EN 60317-17 Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 2010 CENELEC 0 3406 EN 60745-2-11 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre 2010 CENELEC 0 saws) 3407 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable polyolefin 2010 CENELEC 0 209 sleeving, general purpose, flame retarded 3408 EN 61391-2 Ultrasonics - Pulse-echo scanners - Part 2: Measurement of maximum depth of penetration and local dynamic range 2010 CENELEC 0 3409 EN 61753-111- Fibre optic interconnecting devices and passive components performance standard - Part 111-9: Sealed closures for 2010 CENELEC 0 9 category S - Subterranean 3410 EN 61508-5 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for 2010 CENELEC 0 the determination of safety integrity levels 3411 EN 62563-1 Medical electrical equipment - Medical image display systems - Part 1: Evaluation methods - Incorporates Amendment A1: 2010 CENELEC 0 2016 3412 EN 61747-5-3 Liquid crystal display devices - Part 5-3: Environmental, endurance and mechanical test methods - Glass strength and 2010 CENELEC 0 reliability 3413 EN 60793-1-32 Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability 2010 CENELEC 0 3414 EN 62149-4 Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit 2010 CENELEC 0 Ethernet application 3415 EN 50540 Conductors for overhead lines - Aluminium Conductors Steel Supported (ACSS) 2010 CENELEC 0 3416 EN 50411-2-9 Fibre organisers and closures to be used in optical fibre communications systems - Product specifications - Part 2-9: Non- 2010 CENELEC 0 sealed closures for air blown fibre microduct cable, for category S & A 3417 EN 61000-4-20 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in 2010 CENELEC 0 transverse electromagnetic (TEM) waveguides 3418 EN 60034-18- Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems - Test procedures for form-wound 2010 CENELEC 0 32 windings - Evaluation by electrical endurance 3419 EN 60317-25 Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide 2010 CENELEC 0 enamelled round aluminium wire, class 200 3420 EN 60079-25 Explosive atmospheres - Part 25: Intrinsically safe electrical systems 2010 CENELEC 0 3421 EN 50122-3 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of 2010 CENELEC 0 a.c. and d.c. traction systems 3422 EN 60297-3- Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 2010 CENELEC 0 106 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1 3423 EN 60603-7-3 Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data 2010 CENELEC 0 transmission with frequencies up to 100 MHz 3424 HD 60269-3 Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household 2010 CENELEC 0 and similar applications) - Examples of standardized systems of fuses A to F - Incorporates Amendment A1: 2013 3425 EN 62333-3 Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression 2010 CENELEC 0 sheet 3426 EN 61108-3 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2010 CENELEC 0 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results 3427 EN 62282-6- Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety 2010 CENELEC 0 100 3428 EN 60335-2-11 Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers - Incorporates 2010 CENELEC 0 Amendment A1: 2015 3429 CLC/TS 50534 Railway applications - Generic system architectures for onboard electric auxiliary power systems 2010 CENELEC 0 3430 CLC/TR 62271- High-voltage switchgear and controlgear - Part 208: Methods to quantify the steady state, power-frequency electromagnetic 2010 CENELEC 0 208 fields generated by HV switchgear assemblies and HV/LV prefabricated substations 3431 EN 61508-7 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques 2010 CENELEC 0 and measures 3432 CLC/TS 50206- Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 3: Interface between pantograph and 2010 CENELEC 0 3 rolling stock for rail vehicles 3433 EN 60255-1 Measuring relays and protection equipment - Part 1: Common requirements 2010 CENELEC 0 3434 EN 60832-1 Live working - Insulating sticks and attachable devices - Part 1: Insulating sticks 2010 CENELEC 0 3435 EN 61937-11 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 11: MPEG-4 AAC and its 2010 CENELEC 0 extensions in LATM/LOAS 3436 EN 50528 Insulating ladders for use on or near low voltage electrical installations 2010 CENELEC 0 3437 EN 60603-7-4 Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for 2010 CENELEC 0 data transmissions with frequencies up to 250 MHz 3438 EN 62415 Semiconductor devices - Constant current electromigration test 2010 CENELEC 0 3439 EN 60034-18-1 Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines 2010 CENELEC 0 3440 EN 50348 Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements 2010 CENELEC 0 3441 EN 60317-8 Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180 2010 CENELEC 0 3442 EN 61508-1 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements 2010 CENELEC 0 3443 EN 61300-2-24 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24: Tests - 2010 CENELEC 0 Screen testing of ceramic alignment split sleeve by stress application 3444 EN 61226 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control 2010 CENELEC 0 functions 3445 EN 62439-6 Industrial communication networks - High availability automation networks - Part 6: Distributed Redundancy Protocol 2010 CENELEC 0 (DRP) 3446 EN 61558-2-3 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests 2010 CENELEC 0 for ignition transformers for gas and oil burners 3447 EN 60512-17-1 Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp 2010 CENELEC 0 robustness 3448 EN 50491-5-3 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems 2010 CENELEC 0 (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industry environment 3449 EN 62329-3- Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and 2010 CENELEC 0 101 compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements a 3450 EN 80601-2-30 Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of 2010 CENELEC 0 automated non-invasive sphygmomanometers - Incorporates Amendment A1: 2015 3451 EN 50491-2 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems 2010 CENELEC 0 (BACS) - Part 2: Environmental conditions - Incorporates Amendment A1: 2015 3452 EN 60143-4 Series capacitors for power systems - Part 4: Thyristor controlled series capacitors 2010 CENELEC 0 3453 EN 61207-1 Expression of performance of gas analyzers - Part 1: General 2010 CENELEC 0 3454 EN 60917-2-4 Modular order for the development of mechanical structures for electronic equipment practices - Part 2-4: Sectional 2010 CENELEC 0 specification - Interface coordination dimensions for the 25 mm equipment practice - Adaptation dimensions for subracks or chassis applicab 3455 EN 61000-4-8 Electromagnetic compatibility (EMC)- Part 4-8: Testing and measurement techniques - Power frequency magnetic field 2010 CENELEC 0 immunity test 3456 EN 60444-11 Measurement of quartz crystal unit parameters - Part 11: Standard method for the determination of the load resonance 2010 CENELEC 0 frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction 3457 EN 61249-2-42 Materials for printed boards and other interconnecting structures - Part 2-42: Reinforced base materials clad and unclad - 2010 CENELEC 0 Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad 3458 EN 60601-2-28 Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray 2010 CENELEC 0 tube assemblies for medical diagnosis 3459 EN 61850-7-4 Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible 2010 CENELEC 0 logical node classes and data object classes 3460 EN 50377-8-12 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2010 CENELEC 0 Part 8-12: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule fo 3461 EN 61784-3-12 Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 2010 CENELEC 0 12 3462 EN 61280-2-1 Fibre optic communication subsystem test procedures - Part 2-1: Digital systems - Receiver sensitivity and overload 2010 CENELEC 0 measurement 3463 EN 62047-4 Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specification for MEMS 2010 CENELEC 0 3464 EN 50554 Basic standard for the in-situ assessment of a broadcast site related to general public exposure to radio frequency 2010 CENELEC 0 electromagnetic fields 3465 EN 60832-2 Live working - Insulating sticks and attachable devices - Part 2: Attachable devices 2010 CENELEC 0 3466 EN 60512-17-3 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp 2010 CENELEC 0 resistance to cable pull (tensile) 3467 CLC/TS 50537- Railway applications - Mounted parts of the traction transformer and cooling system - Part 1: HV bushing for traction 2010 CENELEC 0 1 transformers 3468 EN 60512-23-2 Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: 2010 CENELEC 0 Suppression characteristics of integral filters 3469 EN 62418 Semiconductor devices - Metallization stress void test 2010 CENELEC 0 3470 EN 50519 Assessment of workers exposure to electric and magnetic fields of industrial induction heating equipment 2010 CENELEC 0 3471 EN 61029-2-6 Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills with water 2010 CENELEC 0 supply - Remains Current 3472 EN 61300-2-48 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - 2009 CENELEC 0 Temperature-humidity cycling 3473 EN 62386-203 Digital addressable lighting interface - Part 203: Particular requirements for control gear - Discharge lamps (excluding 2009 CENELEC 0 fluorescent lamps) (device type 2) 3474 EN 61095 Electromechanical contactors for household and similar purposes 2009 CENELEC 0 3475 EN 50524 Data sheet and name plate for photovoltaic inverters 2009 CENELEC 0 3476 EN 62138 Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems 2009 CENELEC 0 performing category B or C functions 3477 CLC/TR 62453- Field device tool (FDT) interface specification - Part 502: Communication implementation for common object model - IEC 2009 CENELEC 0 502 61784 CPF 2 3478 EN 62110 Electric and magnetic field levels generated by AC power systems - Measurement procedures with regard to public 2009 CENELEC 0 exposure 3479 EN 60598-2-14 Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and 2009 CENELEC 0 similar equipment 3480 CLC/TR 62453- Field device tool (FDT) interface specification - Part 503-1: Communication implementation for common object model - 2009 CENELEC 0 503-1 IEC 61784 CP 3/1 and CP 3/2 3481 EN 60749-20 Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic encapsulated SMDs to the 2009 CENELEC 0 combined effect of moisture and soldering heat 3482 EN 50216-9 Power transformer and reactor fittings - Part 9: Oil-to-water heat exchangers 2009 CENELEC 0 3483 EN 61883-8 Consumer audio/video equipment - Digital interface - Part 8: Transmission of ITU-R BT.601 style digital video data - 2009 CENELEC 0 Incorporates Amendment A1: 2014 3484 EN 50377-2-2 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2009 CENELEC 0 Part 2-2: FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule, category C 3485 EN 61249-4-14 Materials for printed boards and other interconnecting structures - Part 4-14: Sectional specification set for prepreg 2009 CENELEC 0 materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (vertical burning t 3486 EN 61755-3-1 Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia 2009 CENELEC 0 PC ferrule, single mode fibre 3487 EN 61300-2-2 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - 2009 CENELEC 0 Mating durability 3488 EN 60870-5-6 Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the EN 60870-5 companion 2009 CENELEC 0 standards 3489 EN 50483-1 Test requirements for low voltage aerial bundled cable accessories - Part 1: Generalities 2009 CENELEC 0 3490 EN 61988-3-2 Plasma display panels - Part 3-2: Interface - Electrical interface 2009 CENELEC 0 3491 EN 61937-3 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 3: Non-linear PCM 2009 CENELEC 0 bitstreams according to the AC-3 and enhanced AC-3 formats 3492 EN 60603-7-5 Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data 2009 CENELEC 0 transmissions with frequencies up to 250 MHz 3493 EN 61249-2-38 Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - 2009 CENELEC 0 Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free as 3494 EN 50131-3 Alarm systems - Intrusion and hold-up systems - Part 3: Control and indicating equipment 2009 CENELEC 0 3495 EN 60534-2-4 Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability 2009 CENELEC 0 3496 EN 62341-1-2 Organic light emitting diode displays - Part 1-2: Terminology and letter symbols 2009 CENELEC 0 3497 EN 60947-3 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units 2009 CENELEC 0 - Incorporates Amendment A2: 2015 3498 EN 62386-206 Digital addressable lighting interface - Part 206: Particular requirements for control gear - Conversion from digital signal 2009 CENELEC 0 into d. c. voltage (device type 5) 3499 EN 62097 Hydraulic machines, radial and axial - Performance conversion method from model to prototype 2009 CENELEC 0 3500 EN 60728-7-3 Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid fibre coax outside plant 2009 CENELEC 0 status monitoring - Power supply to transponder interface bus (PSTIB) 3501 EN 61558-2-6 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: 2009 CENELEC 0 Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers 3502 CLC/TR 62453- Field device tool (FDT) interface specification - Part 501: Communication implementation for common object model - IEC 2009 CENELEC 0 501 61784 CPF 1 3503 EN 62386-202 Digital addressable lighting interface - Part 202: Particular requirements for control gear - Self-contained emergency 2009 CENELEC 0 lighting (device type 1) 3504 EN 60745-2-21 Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners - Incorporates 2009 CENELEC 0 Amendment A1: 2010 3505 EN 50131-8 Alarm systems - Intrusion and hold-up systems - Part 8: Security fog device/systems 2009 CENELEC 0 3506 CLC/TS 61836 Solar photovoltaic energy systems - Terms, definitions and symbols 2009 CENELEC 0 3507 EN 61300-3-2 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: 2009 CENELEC 0 Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device 3508 EN 50508 Multi-purpose insulating sticks for electrical operations on high voltage installations 2009 CENELEC 0 3509 CLC/TR 62453- Field device tool (FDT) interface specification - Part 509: Communication implementation for common object model - IEC 2009 CENELEC 0 509 61784 CPF 9 3510 EN 60745-2-19 Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers - Incorporates Amendment 2009 CENELEC 0 A1: 2010 3511 EN 61482-1-1 Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-1: Test methods - Method 1: 2009 CENELEC 0 Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing 3512 EN 61547 Equipment for general lighting purposes - EMC immunity requirements 2009 CENELEC 0 3513 EN 60689 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values 2009 CENELEC 0 3514 EN 61249-2-36 Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - 2009 CENELEC 0 Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly 3515 EN 62501 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing - 2009 CENELEC 0 Incorporates Amendment A2: 2017 3516 EN 62024-2 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of 2009 CENELEC 0 inductors for DC to DC converters 3517 EN 50397-2 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 2009 CENELEC 0 kV AC - Part 2: Accessories for covered conductors - Tests and acceptance criteria 3518 EN 62448 Multimedia systems and equipment - Multimedia E-publishing and E-books - Generic format for E-publishing 2009 CENELEC 0 3519 EN 61169-38 Radio-frequency connectors - Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack 2009 CENELEC 0 and panel applications) - Characteristic impedance 50 ohms (type TMA) - 50 ohms applications 3520 EN 60966-3-1 Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable 2009 CENELEC 0 assemblies 3521 EN 61249-2-35 Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - 2009 CENELEC 0 Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly 3522 CLC/TR 62453- Field device tool (FDT) interface specification - Part 41: Object model integration profile - Common object model 2009 CENELEC 0 41 3523 EN 50143 Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 000 2009 CENELEC 0 V but not exceeding 10 000 V 3524 EN 62496-1 Optical circuit boards - Part 1: General 2009 CENELEC 0 3525 EN 60749-20-1 Semiconductor devices - Mechanical and climatic test methods - Part 20-1: Handling, packing, labelling and shipping of 2009 CENELEC 0 surface-mount devices sensitive to the combined effect of moisture and soldering heat 3526 EN 60947-7-3 Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks 2009 CENELEC 0 3527 EN 60601-2-21 Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant 2009 CENELEC 0 radiant warmers - Incorporates Amendment A1: 2016 3528 EN 60519-21 Safety in electroheat installations - Part 21: Particular requirements for resistance heating equipment - Heating and melting 2009 CENELEC 0 glass equipment 3529 EN 61987-10 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: Lists 2009 CENELEC 0 of properties (LOPs) for industrial-process measurement and control for electronic data exchange - Fundamentals 3530 EN 61477 Live working - Minimum requirements for the utilization of tools, devices and equipment - Incorporating Corrigendum 2009 CENELEC 0 February 2010 3531 EN 60601-2-20 Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant 2009 CENELEC 0 transport incubators - Incorporates Amendment A1: 2016 3532 EN 60745-2-15 Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers - Incorporates 2009 CENELEC 0 Amendment A1: 2010 3533 EN 50176 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements 2009 CENELEC 0 3534 EN 50216-10 Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers 2009 CENELEC 0 3535 EN 50119 Railway applications - Fixed installations - Electric traction overhead contact lines - Incorporates Amendment A1: 2013 2009 CENELEC 0 3536 EN 60601-2-54 Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray 2009 CENELEC 0 equipment for radiography and radioscopy - Incorporates Amendment A1: 2015 3537 EN 61280-2-3 Fibre optic communication subsystem test procedures - Part 2-3: Digital systems - Jitter and wander measurements - 2009 CENELEC 0 Incorporating corrigendum March 2010 3538 EN 60904-4 Photovoltaic devices - Part 4: Reference solar devices - Procedures for establishing calibration traceability 2009 CENELEC 0 3539 CLC/TR 62453- Field device tool (FDT) interface specification - Part 506: Communication implementation for common object model - IEC 2009 CENELEC 0 506 61784 CPF 6 3540 EN 80601-2-35 Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating 2009 CENELEC 0 devices using blankets, pads and mattresses and intended for heating in medical use - Incorporates Amendment A1: 2016 3541 EN 61169-24 Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, 2009 CENELEC 0 typically for use in 75 ohm cable networks (type F) 3542 EN 50345 Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead 2009 CENELEC 0 contact lines 3543 EN 50523-1 Household appliances interworking - Part 1: Functional specification 2009 CENELEC 0 3544 EN 60745-2-9 Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers - Remains Current 2009 CENELEC 0 3545 EN 62137-1-4 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic 2009 CENELEC 0 bending test 3546 EN 60424-5 Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores 2009 CENELEC 0 3547 EN 62379-2 Common control interface for networked digital audio and video products - Part 2: Audio 2009 CENELEC 0 3548 EN 60703 Test methods for electroheating installations with electron guns 2009 CENELEC 0 3549 EN 60300-3-11 Dependability management - Part 3-11: Application guide - Reliability centred maintenance 2009 CENELEC 0 3550 EN 60745-2-13 Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws - Incorporates 2009 CENELEC 0 Amendment A1: 2010 3551 EN 61754-25 Fibre optic connector interfaces - Part 25: Type RAO connector family 2009 CENELEC 0 3552 EN 61300-2-12 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - 2009 CENELEC 0 Impact 3553 EN 62341-1-1 Organic light emitting diode (OLED) displays - Part 1-1: Generic specifications 2009 CENELEC 0 3554 EN 62134-1 Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification 2009 CENELEC 0 3555 EN 60393-1 Potentiometers for use in electronic equipment - Part 1: Generic specification 2009 CENELEC 0 3556 EN 60904-7 Photovoltaic devices - Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices 2009 CENELEC 0 3557 EN 62535 Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil 2009 CENELEC 0 3558 EN 55103-2 Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control 2009 CENELEC 0 apparatus for professional use - Part 2: Immunity - Remains Current 3559 EN 61966-5 Multimedia systems and equipment - Colour measurement and management - Part 5: Equipment using plasma display 2009 CENELEC 0 panels 3560 EN 80000-14 Quantities and units - Part 14: Telebiometrics related to human physiology 2009 CENELEC 0 3561 EN 62267 Railway applications - Automated urban guided transport (AUGT) - Safety requirements 2009 CENELEC 0 3562 EN 60626-2 Combined flexible materials for electrical insulation - Part 2: Methods of test 2009 CENELEC 0 3563 EN 62453-315 Field device tool (FDT) interface specification Part 315: Communication profile integration IEC 61784 CPF 15 - 2009 CENELEC 0 Incorporates Amendment A1: 2017 3564 EN 50131-4 Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices 2009 CENELEC 0 3565 EN 50411-2-5 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-5: Sealed 2009 CENELEC 0 closures for air blown fibre microduct, type 1, for category S & A 3566 EN 61535 Installation couplers intended for permanent connection in fixed installations - Incorporates Amendment A1: 2013 2009 CENELEC 0 3567 CLC/TR 62453- Field device tool (FDT) interface specification - Part 503-2: Communication implementation for common object model - 2009 CENELEC 0 503-2 IEC 61784 CP 3/4, CP 3/5 and CP 3/6 3568 EN 60300-3-15 Dependability management - Part 3-15: Application guide - Engineering of system dependability 2009 CENELEC 0 3569 EN 60947-7-2 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper 2009 CENELEC 0 conductors 3570 EN 61984 Connectors - Safety requirements and tests 2009 CENELEC 0 3571 EN 61988-5 Plasma display panels - Part 5: Generic specification 2009 CENELEC 0 3572 EN 60880 Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based 2009 CENELEC 0 systems performing category A functions 3573 EN 61988-2-3 Plasma display panels - Part 2-3: Measuring methods - Image quality: defects and degradation 2009 CENELEC 0 3574 EN 61995-2 Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL - 2009 CENELEC 0 Incorporates Amendment A1: 2017 3575 EN 60745-2-18 Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools 2009 CENELEC 0 3576 EN 60603-7 Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors - 2009 CENELEC 0 Incorporates Amendment A1: 2011 3577 EN 61073-1 Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical 2009 CENELEC 0 fibres and cables - Part 1: Generic specification 3578 EN 60851-2 Winding wires - Test methods - Part 2: Determination of dimensions - Incorporates Amendment A1: 2015 2009 CENELEC 0 3579 EN 62271-109 High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches - Incorporates 2009 CENELEC 0 Amendment A1: 2013 3580 EN 61535 Installation couplers intended for permanent connection in fixed installations - Incorporates Amendment A1: 2013 2009 CENELEC 0 3581 CLC/TS 50398 Alarm systems - Combined and integrated alarm systems - General requirements 2009 CENELEC 0 3582 EN 61753-086- Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorised single- 2009 CENELEC 0 2 mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment 3583 EN 62148-11 Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin active device modules 2009 CENELEC 0 3584 EN 60318-1 Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and 2009 CENELEC 0 circumaural earphones 3585 CLC/TR 62453- Field device tool interface (FDT) specification - Part 61: Device type manager (DTM) - Styleguide for common object 2009 CENELEC 0 61 model 3586 EN 61754-24- Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-11: Type SC-RJ 2009 CENELEC 0 11 connectors with protective housings based on IEC 61076-3-117 3587 EN 61076-3- Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for 2009 CENELEC 0 117 protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 3588 EN 60255-26 Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements - Incorporating 2009 CENELEC 0 corrigendum October 2013 3589 EN 62007-2 Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods 2009 CENELEC 0 3590 EN 81346-2 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - 2009 CENELEC 0 Part 2: Classification of objects and codes for classes 3591 CLC/TR 50531 Alarm systems Terms and definitions 2009 CENELEC 0 3592 EN 50523-2 Household appliances interworking - Part 2: Data structures 2009 CENELEC 0 3593 EN 60947-7-1 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors 2009 CENELEC 0 3594 CLC/TR 50481 Recommendations on filters for shielded enclosures 2009 CENELEC 0 3595 EN 60068-2-27 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock 2009 CENELEC 0 3596 EN 60335-2-30 Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters - Incorporates 2009 CENELEC 0 Amendment A11: 2012; Incorporating corrigendum March 2010 and November 2014 3597 EN 61290-10-1 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical 2009 CENELEC 0 spectrum analyzer 3598 EN 61935-1 Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as 2009 CENELEC 0 specified in the standards series EN 50173 3599 EN 50085-2-4 Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements for service 2009 CENELEC 0 poles and service posts 3600 EN 60974-8 Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems 2009 CENELEC 0 3601 EN 62386-208 Digital addressable lighting interface - Part 208: Particular requirements for control gear - Switching function (device type 2009 CENELEC 0 7) 3602 EN 50194-1 Electrical apparatus for the detection of combustible gases in domestic premises - Part 1: Test methods and performance 2009 CENELEC 0 requirements 3603 EN 50468 Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports 2009 CENELEC 0 3604 EN 61280-4-1 Fibre optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation 2009 CENELEC 0 measurement 3605 EN 50483-6 Test requirements for low voltage aerial bundled cable accessories - Part 6: Environmental testing 2009 CENELEC 0 3606 EN 61000-4-2 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity 2009 CENELEC 0 test 3607 EN 62148-16 Fibre optic active components and devices - Package and interface standards - Part 16: Transmitter and receiver 2009 CENELEC 0 components for use with LC connector interface 3608 EN 62453-303- Field device tool (FDT) interface specification - Part 303- 2: Communication profile integration - IEC 61784 CP 3/4, CP 2009 CENELEC 0 2 3/5 and CP3/6 - Incorporates Amendment A1: 2017 3609 EN 61606-2 Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 2: 2009 CENELEC 0 Consumer use 3610 EN 60966-2-3 Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies - 2009 CENELEC 0 Frequency range 0 MHz to 1 000 MHz, IEC 61169-8 connectors 3611 EN 61754-24- Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-21: Type SC-RJ 2009 CENELEC 0 21 connectors with protective housings based on IEC 61076-3-106, variant 06 3612 EN 61300-2-34 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - 2009 CENELEC 0 Resistance to solvents and contaminating fluids of interconnecting components and closures 3613 EN 61112 Live working - Electrical insulating blankets 2009 CENELEC 0 3614 CLC/TR 62453- Field device tool (FDT) interface specification - Part 515: Communication implementation for common object model - IEC 2009 CENELEC 0 515 61784 CPF 15 3615 EN 61094-2 Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard 2009 CENELEC 0 microphones by the reciprocity technique 3616 EN 50342-4 Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles 2009 CENELEC 0 3617 EN 81346-1 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - 2009 CENELEC 0 Part 1: Basic rules 3618 EN 50215 Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service 2009 CENELEC 0 3619 EN 61300-3-3 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: 2009 CENELEC 0 Examinations and measurements - Active monitoring of changes in attenuation and return loss 3620 EN 61857-21 Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirements for general-purpose 2009 CENELEC 0 models - Wire-wound applications 3621 EN 62453-306 Field device tool (FDT) interface specification - Part 306: Communication profile integration - IEC 61784 CPF 6 2009 CENELEC 0 3622 EN 140401 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors 2009 CENELEC 0 3623 EN 60068-2-14 Environmental testing - Part 2-14: Tests - Test N: Change of temperature 2009 CENELEC 0 3624 EN 62083 Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems 2009 CENELEC 0 3625 EN 50483-5 Test requirements for low voltage aerial bundled cable accessories - Part 5: Electrical ageing test 2009 CENELEC 0 3626 EN 60297-3- Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 2009 CENELEC 0 100 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets 3627 EN 60745-2-14 Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers - Incorporates Amendment 2009 CENELEC 0 A2: 2010; Remains Current 3628 EN 61029-1 Safety of transportable motor-operated electric tools - Part 1: General requirements - Incorporating Corrigendum December 2009 CENELEC 0 2009; Incorporates Amendment A11: 2010; Remains Current 3629 EN 60601-2-19 Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant 2009 CENELEC 0 incubators - Incorporates Amendment A1: 2016 3630 EN 60966-3 Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies 2009 CENELEC 0 3631 EN 62271-100 High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers - Incorporates Amendment A2: 2009 CENELEC 0 2017 3632 EN 62137-1-5 Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5: 2009 CENELEC 0 Mechanical shear fatigue test 3633 EN 61300-2-1 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - 2009 CENELEC 0 Vibration (sinusoidal) 3634 EN 61869-1 Instrument transformers - Part 1: General requirements 2009 CENELEC 0 3635 EN 50513 Solar wafers - Data sheet and product information for crystalline silicon wafers for solar cell manufacturing 2009 CENELEC 0 3636 EN 61111 Live working - Electrical insulating matting 2009 CENELEC 0 3637 EN 60191-6 Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of 2009 CENELEC 0 surface mounted semiconductor device packages 3638 EN 62223 Insulators - Glossary of terms and definitions 2009 CENELEC 0 3639 EN 61935-2-20 Testing of balanced communication cabling in accordance with series EN 50173 - Part 2-20: Patch cords and work area 2009 CENELEC 0 cords - Blank detail specification for class D applications 3640 EN 62430 Environmentally conscious design for electrical and electronic products 2009 CENELEC 0 3641 EN 60851-3 Winding wires - Test methods - Part 3: Mechanical properties - Incorporates Amendment A1: 2013 2009 CENELEC 0 3642 EN 60966-2-1 Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies 2009 CENELEC 0 3643 EN 61249-4-17 Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg 2009 CENELEC 0 materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (ve 3644 EN 61606-1 Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 1: 2009 CENELEC 0 General 3645 EN IEC 62453- Field device tool (FDT) interface specification Part 303-1: Communication profile integration â__ IEC 61784 CP 3/1 and 2009 CENELEC 0 303-1 CP 3/2 - Incorporates Amendment A1: 2018 3646 EN 60282-1 High-voltage fuses - Part 1: Current-limiting fuses - Incorporates Amendment A1: 2014 2009 CENELEC 0 3647 CLC/TR 50484 Recommendations for shielded enclosures 2009 CENELEC 0 3648 EN 61935-3 Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and 2009 CENELEC 0 related standards 3649 EN 60745-1 Hand-held motor-operated electric tools - Safety - Part 1: General requirements - Incorporating Corrigendum December 2009 CENELEC 0 2009; Incorporates Amendment A11: 2010; Remains Current 3650 EN 62419 Control technology - Rules for the designation of measuring instruments 2009 CENELEC 0 3651 CLC/TS 61643- Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distribution 2009 CENELEC 0 12 systems - Selection and application principles 3652 EN 62137-1-3 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic 2009 CENELEC 0 drop test 3653 EN 61770 Electric appliances connected to the water mains Avoidance of backsiphonage and failure of hose-sets - Incorporates 2009 CENELEC 0 Amendment A11: 2018 3654 EN 60745-2-4 Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than 2009 CENELEC 0 disk type - Incorporates Amendment A11: 2011; Remains Current 3655 EN 62546 High Definiton (HD) recording link guidelines 2009 CENELEC 0 3656 EN 62480 Multimedia home network - Network interfaces for network adapter 2009 CENELEC 0 3657 EN 61249-4-16 Materials for printed boards and other interconnecting structures - Part 4-16: Sectional specification set for prepreg 2009 CENELEC 0 materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined 3658 EN 61822 Electrical installations for lighting and beaconing of aerodromes - Constant current regulators 2009 CENELEC 0 3659 EN 62295 Multimedia systems - Common communication protocol for inter-connectivity on heterogeneous networks 2009 CENELEC 0 3660 EN 60601-2-41 Medical electrical equipment - Part 2-41: Particular requirements for basic safety and essential performance of surgical 2009 CENELEC 0 luminaires and luminaires for diagnosis - Incorporates Amendment A1: 2015 3661 EN 62341-5 Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods 2009 CENELEC 0 3662 EN 61249-2-37 Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - 2009 CENELEC 0 Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper- clad for lea 3663 CLC/TR 50506- Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 2: 2009 CENELEC 0 2 Safety assurance 3664 EN 60601-2-50 Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant 2009 CENELEC 0 phototherapy equipment - Incorporates Amendment A1: 2016 3665 EN 50512 Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS) 2009 CENELEC 0 3666 EN 60269-4 Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices - 2009 CENELEC 0 Incorporates Amendment A2: 2016 3667 EN 50411-2-8 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: 2009 CENELEC 0 Microduct connectors, for air blown optical fibres, Type 1 3668 EN 61755-3-2 Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia 2009 CENELEC 0 ferrules for 8 degrees angled-PC single mode fibres 3669 EN 61558-2-13 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: 2009 CENELEC 0 Particular requirements and tests for auto transformers and power supply units incorporating auto transformers 3670 EN 61857-1 Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage 2009 CENELEC 0 3671 EN 61850-7- Communication networks and systems for power utility automation - Part 7-420: Basic communication structure - 2009 CENELEC 0 420 Distributed energy resources logical nodes 3672 EN 60745-2-20 Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws 2009 CENELEC 0 3673 EN 60255-151 Measuring relays and protection equipment - Part 151: Functional requirements for over/under current protection 2009 CENELEC 0 3674 EN 62386-204 Digital addressable lighting interface - Part 204: Particular requirements for control gear - Low voltage halogen lamps 2009 CENELEC 0 (device type 3) 3675 EN 50483-3 Test requirements for low voltage aerial bundled cable accessories - Part 3: Tension and suspension clamps for neutral 2009 CENELEC 0 messenger system 3676 EN 61755-3-8 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-8: Optical 2009 CENELEC 0 interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding materia 3677 EN 80601-2-59 Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of 2009 CENELEC 0 screening thermographs for human febrile temperature screening 3678 EN 62192 Live working - Insulating ropes 2009 CENELEC 0 3679 EN 50483-2 Test requirements for low voltage aerial bundled cable accessories - Part 2: Tension and suspension clamps for self 2009 CENELEC 0 supporting system 3680 EN 60601-2-44 Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray 2009 CENELEC 0 equipment for computed tomography - Incorporates Amendment A2: 2016 3681 EN 61076-3- Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for 2009 CENELEC 0 114 protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments 3682 EN 61558-2-16 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: 2009 CENELEC 0 Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units - Incorporate 3683 EN 61249-4-15 Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepreg 2009 CENELEC 0 materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (ve 3684 EN 61020-1 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification 2009 CENELEC 0 3685 EN 61300-3-34 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: 2009 CENELEC 0 Examinations and measurements - Attenuation of random mated connectors 3686 EN 60196 IEC standard frequencies 2009 CENELEC 0 3687 EN 60034-22 Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating 2009 CENELEC 0 sets 3688 EN 61883-1 Consumer audio/video equipment - Digital interface - Part 1: General 2009 CENELEC 0 3689 EN 61557-11 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2009 CENELEC 0 or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and 3690 EN 62365 Digital audio - Digital input-output interfacing - Transmission of digital audio over asynchronous transfer mode (ATM) 2009 CENELEC 0 networks 3691 EN 50520 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground 2009 CENELEC 0 installations 3692 EN 80416-1 Basic principles for graphical symbols for use on equipment - Part 1: Creation of graphical symbols for registration 2009 CENELEC 0 3693 EN 62386-205 Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for 2009 CENELEC 0 incandescent lamps (device type 4) 3694 EN 61280-2-9 Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio 2009 CENELEC 0 measurement for dense wavelength-division multiplexed systems 3695 EN 62453-301 Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1 - 2009 CENELEC 0 Incorporates Amendment A1: 2017 3696 EN 61300-3-6 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: 2009 CENELEC 0 Examinations and measurements - Return loss 3697 EN 50090-3-3 Home and Building Electronic Systems (HBES) - Part 3-3: Aspects of application - HBES Interworking model and 2009 CENELEC 0 common HBES data types 3698 EN 62516-1 Terrestrial digital multimedia broadcasting (T-DMB) receivers - Part 1: Basic requirement 2009 CENELEC 0 3699 EN 60745-2-12 Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators 2009 CENELEC 0 3700 EN 61755-3-7 Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-7: Optical 2009 CENELEC 0 interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fib 3701 EN 62369-1 Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the 2009 CENELEC 0 frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identif 3702 EN 61300-3-43 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: 2009 CENELEC 0 Examinations and measurements - Mode transfer function measurement for fibre optic sources 3703 EN 60644 Specification for high-voltage fuse-links for motor circuit application 2009 CENELEC 0 3704 EN 61754-15 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 15: Type LSH 2009 CENELEC 0 connector family 3705 EN 62004 Thermal-resistant aluminium alloy wire for overhead line conductor 2009 CENELEC 0 3706 EN 61558-2-4 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: 2009 CENELEC 0 Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers 3707 EN 62321 Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent 2009 CENELEC 0 chromium, polybrominated biphenyls, polybrominated diphenyl ethers) - Remains Current 3708 EN 60068-2-38 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test 2009 CENELEC 0 3709 EN 60034-15 Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. 2009 CENELEC 0 machines 3710 EN 50177 Stationary electrostatic application equipment for ignitable coating powders - Safety requirements - Incorporates 2009 CENELEC 0 Amendment A1: 2012 3711 EN 50483-4 Test requirements for low voltage aerial bundled cable accessories - Part 4: Connectors 2009 CENELEC 0 3712 EN 60297-3- Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 2009 CENELEC 0 105 3-105: Dimensions and design aspects for 1U high chassis 3713 EN 61000-4-6 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted 2009 CENELEC 0 disturbances, induced by radio-frequency fields 3714 EN 61310-2 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking 2008 CENELEC 0 3715 EN 61298-2 Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests 2008 CENELEC 0 under reference conditions 3716 EN 61158-6-16 Industrial communication networks - Fieldbus specifications - Part 6-16: Application layer protocol specification - Type 16 2008 CENELEC 0 elements 3717 EN 50264-2-2 Railway applications - Railway rolling stock power and control cables having special fire performance - Part 2-2: Cables 2008 CENELEC 0 with crosslinked elastomeric insulation - Multicore cables 3718 EN 60738-1-4 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-4: Blank detail specification - Sensing 2008 CENELEC 0 application - Assessment level EZ 3719 EN 60512-15-5 Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: 2008 CENELEC 0 Contact retention in insert, cable nutation 3720 EN 60601-1-9 Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral 2008 CENELEC 0 Standard: Requirements for environmentally conscious design - Incorporates Amendment A1: 2013 3721 EN 61158-3-11 Industrial communication networks - Fieldbus specifications - Part 3-11: Data-link layer service definition - Type 11 2008 CENELEC 0 elements 3722 EN 60335-2-54 Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for 2008 CENELEC 0 household use employing liquids or steam - Incorporating corrigendum January 2015; Incorporates Amendment A1: 2015 3723 EN 60068-2-64 Environmental testing Part 2: Test methods Test Fh: Vibration, broad-band random (digital control) and guidance 2008 CENELEC 0 3724 EN 140101 Blank Detail Specification: Fixed low power film resistors 2008 CENELEC 0 3725 CLC/TS 50457- Conductive charging for electric vehicles - Part 2: Communication protocol between off-board charger and electric vehicle 2008 CENELEC 0 2 3726 EN 60794-2-42 Optical fibre cables - Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 2008 CENELEC 0 fibres 3727 EN 61290-3 Optical amplifiers - Test methods - Part 3: Noise figure parameters 2008 CENELEC 0 3728 EN 61915-1 Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1: General rules for the 2008 CENELEC 0 development of device profiles 3729 EN 60512-15-3 Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert 2008 CENELEC 0 retention in housing (torsional) 3730 EN 50521 Connectors for photovoltaic systems - Safety requirements and tests - Incorporates Amendment A1: 2012 2008 CENELEC 0 3731 EN 62227 Multimedia home server systems - Digital rights permission code - Incorporates Amendment A1: 2013 2008 CENELEC 0 3732 EN 61300-2-44 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - 2008 CENELEC 0 Flexing of the strain relief of fibre optic devices 3733 EN 60512-16- Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations 2008 CENELEC 0 18 - Test 16r: Deflection of contacts, simulation 3734 EN 61189-3 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test 2008 CENELEC 0 methods for interconnection structures (printed boards) 3735 EN 61158-6-11 Industrial communication networks - Fieldbus specifications - Part 6-11: Application layer protocol specification - Type 11 2008 CENELEC 0 elements 3736 EN 61606-3 Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 3: 2008 CENELEC 0 Professional use 3737 EN 62233 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human 2008 CENELEC 0 exposure - Incorporating corrigendum August 2008 3738 EN 61158-4-7 Industrial communication networks - Fieldbus specifications - Part 4-7: Data-link layer protocol specification - Type 7 2008 CENELEC 0 elements 3739 EN 60512-16-7 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - 2008 CENELEC 0 Test 16g: Measurement of contact deformation after crimping 3740 EN 60730-2-11 Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators 2008 CENELEC 0 3741 EN 62457 Multimedia home networks - Home network communication protocol over IP for multimedia household appliances 2008 CENELEC 0 3742 EN 61753-021- Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode 2008 CENELEC 0 2 fibre optic connectors for category C - Controlled environment 3743 CLC/TR 50378- Passive components to be used in optical fibre communication systems - Product specifications - Part 2-2: SC(SC2)-APC 2008 CENELEC 0 2-2 connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre 3744 EN 50382-2 Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 2: Single 2008 CENELEC 0 C - Incorporates Amendment A1: 2013°آ C or 150°آ core silicone rubber insulated cables for 120 3745 EN 62059-31-1 Electricity metering equipment - Dependability - Part 31-1: Accelerated reliability testing - Elevated temperature and 2008 CENELEC 0 humidity 3746 EN 60794-3-50 Optical fibre cables - Part 3-50: Outdoor cables - Family specification for gas pipe cables and subducts for installation by 2008 CENELEC 0 blowing and/or pulling/dragging in gas pipes 3747 EN 60512-16-8 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and 2008 CENELEC 0 terminations - Test 16h: Insulating grip effectiveness (crimped connections) 3748 EN 60751 Industrial platinum resistance thermometers and platinum temperature sensors 2008 CENELEC 0 3749 EN 61298-1 Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General 2008 CENELEC 0 considerations 3750 EN 61649 Weibull analysis 2008 CENELEC 0 3751 EN 62431 Reflectivity of electromagnetic wave absorbers in millimetre wave frequency - Measurement methods 2008 CENELEC 0 3752 EN 61753-021- Fibre optic interconnecting devices and passive components performance standard - Part 021-6: Grade B/2 single-mode 2008 CENELEC 0 6 fibre optic connectors for category O - Uncontrolled environment 3753 EN 61386-1 Conduit systems for cable management - Part 1: General requirements 2008 CENELEC 0 3754 EN 60512-26- Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference 2008 CENELEC 0 100 arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g - Incorporates Amendment A1: 2011 3755 EN 60601-2-39 Medical electrical equipment - Part 2-39: Particular requirements for basic safety and essential performance of peritoneal 2008 CENELEC 0 dialysis equipment - Incorporates Amendment A11: 2011 3756 EN 62460 Temperature - Electromotive force (EMF) tables for pure-element thermocouple combinations 2008 CENELEC 0 3757 EN 50264-2-1 Railway applications - Railway rolling stock power and control cables having special fire performance - Part 2-1: Cables 2008 CENELEC 0 with crosslinked elastomeric insulation - Single core cables 3758 EN 50410 Household and similar electrical appliances - Safety - Particular requirements for decorative robots 2008 CENELEC 0 3759 CLC/TR 62125 Environmental statement specific to TC 20 - Electric cables 2008 CENELEC 0 3760 EN 60512-15-4 Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: 2008 CENELEC 0 Contact insertion, release and extraction force 3761 EN 60670-23 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular 2008 CENELEC 0 requirements for floor boxes and enclosures 3762 CLC/TS 50457- Conductive charging for electric vehicles - Part 1: D.C. charging station 2008 CENELEC 0 1 3763 EN 62428 Electric power engineering - Modal components in three-phase a.c. systems - Quantities and transformations 2008 CENELEC 0 3764 EN 61753-101- Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems 2008 CENELEC 0 3 for Category U - Uncontrolled environment 3765 EN 60229 Electric cables - Tests on extruded oversheaths with a special protective function 2008 CENELEC 0 3766 EN 60335-2-62 Household and similar electrical appliances Safety Part 2-62: Particular requirements for commercial electric rinsing sinks - 2008 CENELEC 0 Incorporating Corrigendum August 2007; Incorporates Amendment A1: 2008 3767 EN 50475 Basic standard for the calculation and the measurement of human exposure to electromagnetic fields from broadcasting 2008 CENELEC 0 service transmitters in the HF bands (3 MHz - 30 MHz) 3768 EN 61158-4-16 Industrial communication networks - Fieldbus specifications - Part 4-16: Data-link layer protocol specification - Type 16 2008 CENELEC 0 elements 3769 EN 62420 Concentric lay stranded overhead electrical conductors containing one or more gap(s) 2008 CENELEC 0 3770 EN 60512-16- Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations 2008 CENELEC 0 14 - Test 16n: Bending strength, fixed male tabs 3771 EN 50164-7 Lightning Protection Components (LPC) - Part 7: Requirements for earthing enhancing compounds - Remains Current 2008 CENELEC 0 3772 EN 60512-16-9 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - 2008 CENELEC 0 Test 16i: Grounding contact spring holding force 3773 EN 60794-3-60 Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for 2008 CENELEC 0 installation by blowing and/or pulling/dragging/floating in drinking water pipes 3774 EN 62310-3 Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements 2008 CENELEC 0 3775 EN 60749-37 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an 2008 CENELEC 0 accelerometer 3776 EN 50377-3-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2008 CENELEC 0 Part 3-1: Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C 3777 EN 61076-3- Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail 2008 CENELEC 0 001 specification 3778 EN 60512-16- Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations 2008 CENELEC 0 11 - Test 16k: Stripping force, solderless wrapped connections 3779 EN 60512-25-9 Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk 2008 CENELEC 0 3780 EN 50131-2-4 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave 2008 CENELEC 0 detectors 3781 EN 60512-16- Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations 2008 CENELEC 0 16 - Test 16p: Torsional strength, fixed male tabs 3782 EN 60216-5 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index 2008 CENELEC 0 (RTE) of an insulating material 3783 EN 60626-3 Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials - Incorporates 2008 CENELEC 0 Amendment A1: 2012 3784 EN 61646 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval - Remains Current 2008 CENELEC 0 3785 EN 50411-2 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2: General 2008 CENELEC 0 and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors 3786 EN 60794-2-40 Optical fibre cables - Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables 2008 CENELEC 0 3787 EN 60519-7 Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns 2008 CENELEC 0 3788 EN 61298-3 Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for 2008 CENELEC 0 the effects of influence quantities 3789 EN 60384-11 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film 2008 CENELEC 0 dielectric metal foil d.c. capacitors 3790 EN 50264-3-1 Railway applications - Railway rolling stock power and control cables having special fire performance - Part 3-1: Cables 2008 CENELEC 0 with crosslinked elastomeric insulation with reduced dimensions - Single core cables 3791 EN 61158-3-18 Industrial communication networks - Fieldbus specifications - Part 3-18: Data-link layer service definition - Type 18 2008 CENELEC 0 elements 3792 EN 61310-3 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators 2008 CENELEC 0 3793 EN 61834-11 Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 2008 CENELEC 0 625-50, 1125-60 and 1250-50 systems) - Part 11: HDV format for 1080i and 720p systems 3794 EN 60738-1-1 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current 2008 CENELEC 0 limiting application - Assessment level EZ 3795 EN 62491 Industrial systems, installations and equipment and industrial products - Labelling of cables and cores 2008 CENELEC 0 3796 EN 61290-3-2 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method 2008 CENELEC 0 3797 EN 60512-15-6 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: 2008 CENELEC 0 Effectiveness of connector coupling devices 3798 EN 50131-2-6 Alarm systems - Intrusion and hold-up systems - Part 2-6: Opening contacts (magnetic) 2008 CENELEC 0 3799 EN 61968-13 Application integration at electric utilities - System interfaces for distribution management - Part 13: CIM RDF Model 2008 CENELEC 0 exchange format for distribution 3800 EN 50377-11-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2008 CENELEC 0 Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C 3801 EN 50382-1 Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 1: 2008 CENELEC 0 General requirements - Incorporates Amendment A1: 2013 3802 EN 61318 Live working - Conformity assessment applicable to tools, devices and equipment 2008 CENELEC 0 3803 EN 60512-16- Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations 2008 CENELEC 0 17 - Test 16q: Tensile and compressive strength, fixed male tabs 3804 EN 60728-4 Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for 2008 CENELEC 0 coaxial cable networks 3805 EN 61290-11-1 Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME) 2008 CENELEC 0 3806 EN 60601-1-3 Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral 2008 CENELEC 0 Standard: Radiation protection in diagnostic X-ray equipment - Incorporating corrigenda March 2010 and May 2014; Incorporates Amendment A 3807 EN 61158-5-7 Industrial communication networks - Fieldbus specifications - Part 5-7: Application layer service definition - Type 7 2008 CENELEC 0 elements 3808 CLC/TS 62271- High-voltage switchgear and controlgear - Part 304: Design classes for indoor enclosed switchgear and controlgear for 2008 CENELEC 0 304 rated voltages above 1 kV up to and including 52 kV to be used in severe climatic conditions 3809 EN 60255-22-1 Measuring relays and protection equipment - Part 22-1: Electrical disturbance tests - 1 MHz burst immunity tests 2008 CENELEC 0 3810 EN 61298-4 Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: 2008 CENELEC 0 Evaluation report content 3811 EN 61249-4-1 Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepreg 2008 CENELEC 0 materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability 3812 EN 50264-3-2 Railway applications - Railway rolling stock power and control cables having special fire performance - Part 3-2: Cables 2008 CENELEC 0 with crosslinked elastomeric insulation with reduced dimensions - Multicore cables 3813 CLC/TR 50456 Guidelines to achieving compliance with EC directives for alarm systems 2008 CENELEC 0 3814 EN 61753-062- Fibre optic interconnecting devices and passive components performance standard - Part 062-6: Non-connectorized single- 2008 CENELEC 0 6 mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test 3815 EN 60738-1-2 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-2: Blank detail specification - Heating 2008 CENELEC 0 element application - Assessment level EZ 3816 EN 60512-15-7 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: 2008 CENELEC 0 Robustness of protective cover attachment 3817 EN 50342-3 Lead-acid starter batteries - Part 3: Terminal system for batteries with 36 V nominal voltage 2008 CENELEC 0 3818 EN 62429 Reliability growth - Stress testing for early failures in unique complex systems 2008 CENELEC 0 3819 EN 61051-1 Varistors for use in electronic equipement - Part 1: Generic specification 2008 CENELEC 0 3820 EN 80000-6 Quantities and units - Part 6: Electromagnetism 2008 CENELEC 0 3821 EN 60601-2-31 Medical electrical equipment - Part 2-31: Particular requirements for the basic safety and essential performance of external 2008 CENELEC 0 cardiac pacemakers with internal power source - Incorporates Amendment A1: 2011 3822 CLC/TR 50126- Railway applications The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) 2008 CENELEC 0 3 Part 3: Guide to the application of EN 50126-1 for rolling stock RAM 3823 EN 61291-6-1 Opticial amplifiers - Part 6-1: Interfaces - Command set 2008 CENELEC 0 3824 CLC/TS 60034- Rotating electrical machines - Part 25: Guidance for the design and performance of a.c. motors specifically designed for 2008 CENELEC 0 25 converter supply 3825 EN 61158-3-8 Industrial communication networks - Fieldbus specifications - Part 3-8: Data-link layer service definition - Type 8 elements 2008 CENELEC 0 3826 EN 60601-2-37 Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of 2008 CENELEC 0 ultrasonic medical diagnostic and monitoring equipment - Incorporates Amendment A1: 2015 3827 EN 60255-22-2 Measuring relays and protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests 2008 CENELEC 0 3828 EN 50444 Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied 2008 CENELEC 0 processes 3829 EN 60641-1 Specification for pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements 2008 CENELEC 0 3830 EN 61158-3-7 Industrial communication networks - Fieldbus specifications - Part 3-7: Data-link layer service definition - Type 7 elements 2008 CENELEC 0 3831 EN 61158-5-16 Industrial communication networks - Fieldbus specifications - Part 5-16: Application layer service definition - Type 16 2008 CENELEC 0 elements 3832 EN 50131-2-5 Alarm systems - Intrusion and hold-up systems - Part 2-5: Requirements for combined passive infrared and ultrasonic 2008 CENELEC 0 detectors 3833 EN 61158-4-8 Industrial communication networks - Fieldbus specifications - Part 4-8: Data-link layer protocol specification - Type 8 2008 CENELEC 0 elements 3834 EN 60204-32 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines 2008 CENELEC 0 3835 EN 61512-3 Batch control - Part 3: General and site recipe models and representation 2008 CENELEC 0 3836 EN 50499 Procedure for the assessment of the exposure of workers to electromagnetic fields 2008 CENELEC 0 3837 EN 61158-5-8 Industrial communication networks - Fieldbus specifications - Part 5-8: Application layer service definition - Type 8 2008 CENELEC 0 elements 3838 EN 62494-1 Medical electrical equipment - Exposure index of digital X-ray imaging systems - Part 1: Definitions and requirements for 2008 CENELEC 0 general radiography 3839 EN 60300-3-16 Dependability management - Part 3-16: Application guide - Guidelines for specification of maintenance support services 2008 CENELEC 0 3840 EN 60584-3 Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system 2008 CENELEC 0 3841 EN 60384-11-1 Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification - Fixed polyethylene-terephthalate 2008 CENELEC 0 film dielectric metal foil d.c. capacitors - Assessment level EZ 3842 EN 61228 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method 2008 CENELEC 0 3843 EN 60749-38 Semiconductor devices - Mechanical and climatic test methods - Part 38: Soft error test method for semiconductor devices 2008 CENELEC 0 with memory 3844 EN 61753-083- Fibre optic interconnecting devices and passive components performance standard - Part 083-2: Non-connectorised single- 2008 CENELEC 0 2 mode fibre optic C-band/L-band WDM devices for category C - Controlled environment 3845 EN 61400-25-4 Wind turbines - Part 25-4: Communications for monitoring and control of wind power plants - Mapping to communication 2008 CENELEC 0 profile 3846 EN 50486 Equipment for use in audio and video door-entry systems 2008 CENELEC 0 3847 EN 61355-1 Classification and designation of documents for plants, systems and equipment - Part 1: Rules and classification tables 2008 CENELEC 0 3848 EN 61310-1 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals 2008 CENELEC 0 3849 EN 60085 Electrical insulation - Thermal evaluation and designation 2008 CENELEC 0 3850 EN 61109 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater 2008 CENELEC 0 than 1 000 V - Definitions, test methods and acceptance criteria 3851 EN 60738-1-3 Thermistors - Directly heated positive step-function temperature coefficient - Part 1-3: Blank detail specification - Inrush 2008 CENELEC 0 current application - Assessment level EZ 3852 EN 61758-1 Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance 2008 CENELEC 0 3853 EN 61158-5-17 Industrial communication networks - Fieldbus specifications - Part 5-17: Application layer service definition - Type 17 2008 CENELEC 0 elements 3854 EN 60255-22-4 Measuring relays and protection equipment - Part 22-4: Electrical disturbance tests - Electrical fast transient/burst immunity 2008 CENELEC 0 test 3855 EN 62002-2 Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing 2008 CENELEC 0 3856 EN 62317-14 Ferrite cores - Dimensions - Part 14: EFD-cores for use in power supply applications 2008 CENELEC 0 3857 EN 60512-16-5 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - 2008 CENELEC 0 Test 16e: Gauge retention force (resilient contacts) 3858 EN 61188-5-8 Printed boards and printed board assemblies - Design and use - Part 5-8: Attachment (land/joint) considerations - Area 2008 CENELEC 0 array components (BGA, FBGA, CGA, LGA) 3859 EN 60318-6 Electroacoustics - Simulators of human head and ear - Part 6: Mechanical coupler for the measurement of bone vibrators 2008 CENELEC 0 3860 EN 61076-3 Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification 2008 CENELEC 0 3861 EN 60254-2 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells 2008 CENELEC 0 3862 EN 61557-12 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2008 CENELEC 0 or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) 3863 EN 60076-6 Power transformers - Part 6: Reactors 2008 CENELEC 0 3864 EN 61753-084- Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single- 2008 CENELEC 0 2 mode 980/1550 nm WWDM devices for category C - Controlled environment 3865 EN 61300-3-42 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-42: 2008 CENELEC 0 Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves 3866 EN 60958-4 Digital audio interface Part 4: Professional applications (TA4) - Incorporates Amendment A1: 2008 2008 CENELEC 0 3867 EN 50289-4-4 Communication cables - Specifications for test methods - Part 4-4: Environmental test methods - Resistance to solvents and 2008 CENELEC 0 contaminating fluids 3868 EN 62271-205 High-voltage switchgear and controlgear - Part 205: Compact switchgear assemblies for rated voltages above 52 kV 2008 CENELEC 0 3869 EN 60079-27 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) - Remains Current 2008 CENELEC 0 3870 EN 60904-3 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral 2008 CENELEC 0 irradiance data 3871 EN 50106 Safety of household and similar electrical appliances - Particular rules for routine tests referring to appliances under the 2008 CENELEC 0 scope of EN 60335-1 3872 EN 60068-2-31 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens 2008 CENELEC 0 3873 EN 61162-3 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 3: Serial data instrument 2008 CENELEC 0 network - Incorporates Amendment A1: 2014 3874 EN 61039 Classification of insulating liquids 2008 CENELEC 0 3875 EN 60512-16-1 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - 2008 CENELEC 0 Test 16a: Probe damage 3876 EN 61857-22 Electrical insulation systems - Procedures for thermal evaluation - Part 22: Specific requirements for encapsulated-coil 2008 CENELEC 0 model - Wire-wound electrical insulation system (EIS) 3877 EN 61467 Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power 2008 CENELEC 0 arc tests 3878 EN 61966-2-5 Multimedia systems and equipment - Colour measurement and management - Part 2-5: Colour management - Optional 2008 CENELEC 0 RGB colour space - opRGB 3879 EN 62031 LED modules for general lighting - Safety specifications - Incorporates Amendment A2: 2015 2008 CENELEC 0 3880 EN 45502-2-2 Active implantable medical devices - Part 2-2: Particular requirements for active implantable medical devices intended to 2008 CENELEC 0 treat tachyarrhythmia (includes implantable defibrillators) - Incorporating corrigendum April 2009 3881 EN 62002-1 Mobile and portable DVB-T/H radio access - Part 1: Interface specification 2008 CENELEC 0 3882 EN 50490 Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting 2008 CENELEC 0 control and monitoring systems - Units for selective switching and monitoring of individual lamps 3883 EN 61158-6-17 Industrial communication networks - Fieldbus specifications - Part 6-17: Application layer protocol specification - Type 17 2008 CENELEC 0 elements 3884 EN 61158-6-8 Industrial communication networks - Fieldbus specifications - Part 6-8: Application layer protocol specification - Type 8 2008 CENELEC 0 elements 3885 EN 60300-3-4 Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements 2008 CENELEC 0 3886 EN 61400-21 Wind turbines - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines 2008 CENELEC 0 3887 EN 60641-3-2 Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements 2008 CENELEC 0 for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 3888 EN 60335-2- Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers 2008 CENELEC 0 108 3889 EN 50504 Validation of arc welding equipment 2008 CENELEC 0 3890 EN 50131-2-3 Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements for microwave detectors 2008 CENELEC 0 3891 CLC/TS 61496- Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic 2008 CENELEC 0 3 Protective Devices responsive to Diffuse Reflection (AOPDDR) 3892 EN 60255-22-3 Measuring relays and protection equipment - Part 22-3: Electrical disturbance tests - Radiated electromagnetic field 2008 CENELEC 0 immunity 3893 EN 61223-3-2 Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of 2008 CENELEC 0 mammographic X-ray equipment 3894 CLC/TR 50455 List of interpretations on the EN 60730 series "Automatic electrical controls for household and similar use" 2008 CENELEC 0 3895 EN 50500 Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway 2008 CENELEC 0 environment with respect to human exposure - Incorporates Amendment A1: 2015 3896 EN 60068-2-20 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices 2008 CENELEC 0 with leads 3897 EN 61952 Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V 2008 CENELEC 0 - Definitions, test methods and acceptance criteria 3898 EN 60512-16-2 Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - 2008 CENELEC 0 Test 16b: Restricted entry 3899 EN 60794-2-50 Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated 2008 CENELEC 0 cable assemblies 3900 EN 50289-4-5 Communication cables - Specifications for test methods - Part 4-5: Environmental test methods - Climatic sequence 2008 CENELEC 0 3901 EN 60794-2-41 Optical fibre cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres 2008 CENELEC 0 3902 EN 60068-2-6 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) 2008 CENELEC 0 3903 EN 60958-1 Digital audio interface - Part 1: General - Incorporates Amendment A1: 2014 2008 CENELEC 0 3904 CLC/TR 50454 Guide for the application of aluminium electrolytic capacitors 2008 CENELEC 0 3905 EN 61158-3-16 Industrial communication networks - Fieldbus specifications - Part 3-16: Data-link layer service definition - Type 16 2008 CENELEC 0 elements 3906 EN 60793-2-60 Optical fibres - Part 2-60: Product specifications - Sectional specification for category C single-mode intraconnection fibres 2008 CENELEC 0 3907 EN 61300-2-15 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests - 2008 CENELEC 0 Torque strength of coupling mechanism 3908 EN 140101-806 Detail Specification: Fixed low power film resistors - Metal film resistors on high grade ceramic, conformal coated or 2008 CENELEC 0 molded, axial or preformed leads - Incorporates Amendment A1: 2013 3909 EN 62471 Photobiological safety of lamps and lamp systems 2008 CENELEC 0 3910 EN 60794-3-30 Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river 2008 CENELEC 0 crossings and coastal application 3911 EN 60034-29 Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine 2008 CENELEC 0 temperature rise 3912 EN 61995-1 Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements - Incorporates 2008 CENELEC 0 Amendment A1: 2017 3913 EN 60794-2-30 Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables 2008 CENELEC 0 3914 EN 60384-20-1 Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification - Fixed metallized polyphenylene 2008 CENELEC 0 sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ 3915 EN 61158-6-7 Industrial communication networks - Fieldbus specifications - Part 6-7: Application layer protocol specification - Type 7 2008 CENELEC 0 elements 3916 EN 60512-15-1 Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: 2008 CENELEC 0 Contact retention in insert 3917 EN 61290-10-2 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum 2008 CENELEC 0 analyzer 3918 EN 140100 Sectional Specification: Fixed low power film resistors 2008 CENELEC 0 3919 EN 61076-3- Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for 2008 CENELEC 0 116 protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments 3920 EN 62311 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 2008 CENELEC 0 300 GHz) 3921 EN 50482 Instrument transformers - Three-phase inductive voltage transformers having Um up to 52 kV 2008 CENELEC 0 3922 EN 50476 Product standard to demonstrate the compliance of broadcast station transmitters with the reference levels and the basic 2008 CENELEC 0 restrictions related to public exposure to radio frequency electromagnetic fields (3 MHz - 30 MHz) 3923 EN 60512-16-6 Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - 2008 CENELEC 0 Test 16f: Robustness of terminations 3924 EN 61158-4-17 Industrial communication networks - Fieldbus specifications - Part 4-17: Data-link layer protocol specification - Type 17 2008 CENELEC 0 elements 3925 EN 50289-4-7 Communication cables - Specifications for test methods - Part 4-7: Environmental test methods - Damp heat, steady state 2008 CENELEC 0 3926 EN 60317-0-3 Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire - 2008 CENELEC 0 Incorporates Amendment A1: 2013 3927 EN 60512-16-3 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - 2008 CENELEC 0 Test 16c: Contact-bending strength 3928 EN 60512-16- Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations 2008 CENELEC 0 13 - Test 16m: Un-wrapping, solderless wrapped connections 3929 EN 60034-3 Rotating electrical machines Part 3: Specific requirements for cylindrical rotor synchronous machines 2008 CENELEC 0 3930 EN 61158-5-11 Industrial communication networks - Fieldbus specifications - Part 5-11: Application layer service definition - Type 11 2008 CENELEC 0 elements 3931 EN 50408 Household and similar electrical appliances - Safety - Particular requirements for cab heaters for vehicles - Incorporates 2008 CENELEC 0 Amendment A1: 2011 3932 EN 60601-2-29 Medical electrical equipment - Part 2-29: Particular requirements for the basic safety and essential performance of 2008 CENELEC 0 radiotherapy simulators - Incorporates Amendment A11: 2011 3933 EN 61326-3-2 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements 2008 CENELEC 0 for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications w 3934 EN 61230 Live working - Portable equipment for earthing or earthing and short-circuiting 2008 CENELEC 0 3935 EN 61996-2 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2: 2008 CENELEC 0 Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test results 3936 EN 61158-3-17 Industrial communication networks - Fieldbus specifications - Part 3-17: Data-link layer service definition - Type 17 2008 CENELEC 0 elements 3937 EN 50216-11 Power transformer and reactor fittings - Part 11: Oil and winding temperature indicators 2008 CENELEC 0 3938 EN 61076-2- Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 2008 CENELEC 0 105 connectors with screw-locking 3939 EN 62040-1 Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS - Incorporates Amendment A1: 2008 CENELEC 0 2013 3940 EN 50085-2-2 Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements for cable 2008 CENELEC 0 trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor 3941 EN 60512-16-4 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - 2008 CENELEC 0 Test 16d: Tensile strength (crimped connections) 3942 EN 60794-3-40 Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by 2008 CENELEC 0 blowing and/or pulling in non-man accessible storm and sanitary sewers 3943 EN 60641-3-1 Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements 2008 CENELEC 0 for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1 3944 EN 62220-1-3 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective 2008 CENELEC 0 quantum efficiency - Detectors used in dynamic imaging 3945 EN 62503 Multimedia quality - Method of assessment of synchronization of audio and video 2008 CENELEC 0 3946 EN 50117-4-1 Coaxial cables - Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 - Indoor drop 2008 CENELEC 0 cables for systems operating at 5 MHz - 3 000 MHz - Incorporates Amendment A1: 2013 3947 EN 60861 Equipment for monitoring of radionuclides in liquid effluents and surface waters 2008 CENELEC 0 3948 EN 50413 Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic 2008 CENELEC 0 fields (0 Hz - 300 GHz) - Incorporates Amendment A1: 2013 3949 EN 50264-1 Railway applications - Railway rolling stock power and control cables having special fire performance - Part 1: General 2008 CENELEC 0 requirements 3950 EN 60601-1-10 Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral 2008 CENELEC 0 Standard: Requirements for the development of physiologic closed-loop controllers - Incorporates Amendment A1: 2015 3951 EN 60851-5 Winding wires - Test methods - Part 5: Electrical properties - Incorporates Amendment A1: 2011 2008 CENELEC 0 3952 EN 60664-1 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests 2007 CENELEC 0 3953 EN 60335-2- Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating 2007 CENELEC 0 106 units for room heating installed under removable floor coverings 3954 EN 61300-2-51 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - 2007 CENELEC 0 Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode 3955 EN 61557-2 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2007 CENELEC 0 or monitoring of protective measures - Part 2: Insulation resistance 3956 EN 62339-1 Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals 2007 CENELEC 0 3957 CLC/TR 62258- Semiconductor die products Part 3: Recommendations for good practice in handling, packing and storage 2007 CENELEC 0 3 3958 EN 60027-3 Letter symbols to be used in electrical technology Part 3: Logarithmic and related quantities, and their units 2007 CENELEC 0 3959 EN 61188-5-4 Printed boards and printed board assemblies - Design and use - Part 5-4: Attachment (land/joint) considerations - 2007 CENELEC 0 Components with J leads on two sides 3960 EN 50377-8-6 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2007 CENELEC 0 Part 8-6: LSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C 3961 EN 61760-2 Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - 2007 CENELEC 0 Application guide 3962 EN 60068-2-1 Environmental testing - Part 2-1: Tests - Test A: Cold 2007 CENELEC 0 3963 EN 61558-2-2 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for 2007 CENELEC 0 control transformers and power supplies incorporating control transformers 3964 EN 61138 Cables for portable earthing and short-circuiting equipment 2007 CENELEC 0 3965 EN 61300-3-24 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-24: 2007 CENELEC 0 Examinations and Measurements - Keying Accuracy of Optical Connectors for Polarization Maintaining Fibre 3966 EN 60730-2-4 Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors 2007 CENELEC 0 for motor-compressors of hermetic and semi-hermetic type 3967 EN 50342-2 Lead-acid starter batteries - Part 2: Dimensions of batteries and marking of terminals - Incorporates Amendment A1: 2014 2007 CENELEC 0 3968 EN 61097-1 Global maritime distress and safety system (GMDSS) - Part 1: Radar transponder - Marine search and rescue (SART) - 2007 CENELEC 0 Operational and performance requirements, methods of testing and required test results 3969 EN 60927 Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements - Incorporates Amendment 2007 CENELEC 0 A1: 2013 3970 EN 61557-6 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2007 CENELEC 0 or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems 3971 EN 61131-2 Programmable controllers - Part 2: Equipment requirements and tests 2007 CENELEC 0 3972 EN 61000-4-34 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions 2007 CENELEC 0 and voltage variations immunity tests for equipment with input current more than 16 A per phase 3973 EN 60587 Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking 2007 CENELEC 0 and erosion 3974 EN 62127-1 Ultrasonics - Hydrophones - Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz - 2007 CENELEC 0 Incorporates Amendment A1: 2013 3975 EN 61300-2-49 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-49: Tests - 2007 CENELEC 0 Connector installation test 3976 EN 61753-092- Fibre optic interconnecting devices and passive components performance standard - Part 092-6: Non-connectorized single- 2007 CENELEC 0 6 mode circulators for category O - Uncontrolled environment and sequential test 3977 EN 61537 Cable management - Cable tray systems and cable ladder systems 2007 CENELEC 0 3978 EN 61188-5-3 Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - 2007 CENELEC 0 Components with gull-wing leads on two sides 3979 EN 60027-4 Letter symbols to be used in electric technology - Part 4: Rotating electric machines 2007 CENELEC 0 3980 EN 60444-9 Measurement of quartz crystal unit parameters - Part 9: Measurement of spurious resonances of piezoelectric crystal units 2007 CENELEC 0 3981 CLC/TR 50501- Railway applications Rolling stock Intercommunication between vehicles and train/wayside Part 1: Data dictionary and 2007 CENELEC 0 1 rules for functional standardisation 3982 EN 140401-802 Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2 - Incorporates Amendment 2007 CENELEC 0 A3: 2017 3983 EN 60384-18-2 Fixed capacitors for use in electronic equipment - Part 18-2: Blank detail specification - Fixed aluminium electrolytic 2007 CENELEC 0 surface mount capacitors with non-solid electrolyte - Assessment level EZ 3984 EN 62379-1 Common control interface for networked digital audio and video products - Part 1: General 2007 CENELEC 0 3985 EN 60404-13 Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet 2007 CENELEC 0 and strip 3986 EN 61558-2-7 Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for 2007 CENELEC 0 transformers and power supplies for toys 3987 EN 60454-2 Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test 2007 CENELEC 0 3988 EN 61558-2-1 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for 2007 CENELEC 0 separating transformers and power supplies incorporating separating transformers for general applications - Remains Current 3989 CLC/TR 50452 Railway applications Radio remote control system of traction vehicle for freight traffic in multiple traction operation 2007 CENELEC 0 3990 CLC/TR 61800- Adjustable speed electrical power drive systems Part 6: Guide for determination of types of load duty and corresponding 2007 CENELEC 0 6 current ratings 3991 EN 62421 Electronics assembly technology - Electronic modules 2007 CENELEC 0 3992 EN 61192-5 Workmanship requirements for soldered electronic assemblies - Part 5: Rework, modification and repair of soldered 2007 CENELEC 0 electronic assemblies 3993 EN 62021-2 Insulating liquids - Determination of acidity - Part 2: Colourimetric titration 2007 CENELEC 0 3994 EN 61937-8 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 8: Non-linear PCM 2007 CENELEC 0 bitstreams according to the Windows Media Audio (WMA) Professional format 3995 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin 2007 CENELEC 0 246 sleeving, dual wall, not flame retarded 3996 EN 62132-3 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 3: Bulk current injection (BCI) 2007 CENELEC 0 method 3997 EN 62056-53 Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control Part 53: COSEM Application Layer - 2007 CENELEC 0 Remains Current 3998 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, 2007 CENELEC 0 211 semi-rigid polyolefin, shrink ratio 2:1 3999 EN 61223-2-6 Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - Imaging performance of 2007 CENELEC 0 computed tomography X-ray equipment 4000 EN 50377-8-4 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2007 CENELEC 0 Part 8-4: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U 4001 EN 62273-1 Methods of measurement for radio transmitters - Part 1: Performance characteristics of terrestrial digital television 2007 CENELEC 0 transmitters 4002 EN 61753-1 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for 2007 CENELEC 0 performance standards 4003 EN 50377-8-2 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2007 CENELEC 0 Part 8-2: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C 4004 EN 50464-3 Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment 2007 CENELEC 0 not exceeding 36 kV - Part 3: Determination of the power rating of a transformer loaded with non-sinusoidal currents 4005 EN 61000-4-18 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave 2007 CENELEC 0 immunity test - Incorporating corrigendum September 2007; Incorporates Amendment A1: 2010 4006 CLC/TR 50511 Railway applications - Communications, signalling and processing systems - ERTMS/ETCS - External signalling for lines 2007 CENELEC 0 equipped with ERTMS/ETCS Level 2 4007 EN 50478 Functional receiver specification of satellite digital interactive television with a low data rate return channel via satellite - 2007 CENELEC 0 Modem layer specification 4008 EN 60191-6-16 Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for 2007 CENELEC 0 BGA, LGA, FBGA and FLGA 4009 EN 60565 Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 Hz to 1 MHz 2007 CENELEC 0 4010 CLC/TR 50451 Railway applications Systematic allocation of safety integrity requirements 2007 CENELEC 0 4011 EN 61000-6-4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments - 2007 CENELEC 0 Incorporates Amendment A1: 2011 4012 EN 62272-2 Digital radio mondiale (DRM) - Part 2: Digital radio in the bands below 30 MHz - Methods of measurement for DRM 2007 CENELEC 0 transmitters 4013 EN 60763-2 Specification for laminated pressboard - Part 2: Methods of test 2007 CENELEC 0 4014 EN 62022 Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials 2007 CENELEC 0 transported by vehicles 4015 EN 61988-4 Plasma display panels - Part 4: Climatic and mechanical testing methods 2007 CENELEC 0 4016 EN 61340-3-1 Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge 2007 CENELEC 0 test waveforms 4017 EN 60970 Insulating liquids - Methods for counting and sizing particles - Incorporating corrigendum January 2008 2007 CENELEC 0 4018 EN 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat- 2007 CENELEC 0 248 shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 4019 EN 60947-5-2 Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches - 2007 CENELEC 0 Incorporates Amendment A1: 2012 4020 EN 62347 Guidance on system dependability specifications 2007 CENELEC 0 4021 CLC/TR 50459- Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - 2007 CENELEC 0 7 Driver-Machine interface - Part 7: Specific Transmission Modules 4022 EN 62220-1-2 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-2: Determination of the detective 2007 CENELEC 0 quantum efficiency - Detectors used in mammography 4023 EN 62230 Electric cables - Spark-test method - Incorporates Amendment A1: 2014 2007 CENELEC 0 4024 EN 50377-8-9 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2007 CENELEC 0 Part 8-9: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U 4025 EN 61023 Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment 2007 CENELEC 0 (SDME) - Performance requirements, methods of testing and required test results 4026 EN 60534-9 Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs 2007 CENELEC 0 4027 EN 61169-2 Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 2007 CENELEC 0 4028 EN 60068-2-82 Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components 2007 CENELEC 0 4029 EN 61157 Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment - Incorporates 2007 CENELEC 0 Amendment A1: 2013 4030 EN 50377-8-3 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2007 CENELEC 0 Part 8-3: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C 4031 EN 62271-209 High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for 2007 CENELEC 0 rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations 4032 EN 60317-0-5 Specifications for particular types of winding wires Part 0-5: General requirements - Glass-fibre braided resin or varnish 2007 CENELEC 0 impregnated, bare or enamelled rectangular copper wire 4033 EN 61098 Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies 2007 CENELEC 0 4034 EN 60068-2-2 Environmental testing - Part 2-2: Tests - Test B: Dry heat 2007 CENELEC 0 4035 EN 61169-37 Radio-frequency connectors - Part 37: Sectional specification for STWX8 R.F connectors 2007 CENELEC 0 4036 EN 60068-3-11 Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in 2007 CENELEC 0 climatic test chambers 4037 EN 60454-3-11 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: 2007 CENELEC 0 Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure- sensitive adhesives 4038 EN 60670-21 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular 2007 CENELEC 0 requirements for boxes and enclosures with provision for suspension means 4039 EN 55012 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement 2007 CENELEC 0 for the protection of off-board receivers - Incorporates Amendment A1: 2009 4040 EN 60730-2-10 Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays 2007 CENELEC 0 4041 EN 50377-8-8 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2007 CENELEC 0 Part 8-8: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U 4042 EN 50289-1-16 Communication cables - Specifications for test methods - Part 1-16: Electromagnetic performance - Coupling attenuation of 2007 CENELEC 0 cable assemblies (Field conditions) 4043 EN 140401-801 Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1 - Incorporates 2007 CENELEC 0 Amendment A1: 2013 4044 EN 60730-2-3 Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for 2007 CENELEC 0 ballasts for tubular fluorescent lamps 4045 EN 55020 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of 2007 CENELEC 0 measurement - Incorporates Amendment A12: 2016: Remains Current 4046 EN 60426 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods 2007 CENELEC 0 4047 EN 61300-2-26 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - 2007 CENELEC 0 Salt mist 4048 EN 62464-1 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters 2007 CENELEC 0 4049 EN 60027-2 Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics - Remains Current 2007 CENELEC 0 4050 EN 61300-3-10 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: 2007 CENELEC 0 Examinations and measurements - Gauge retention force 4051 EN 61557-7 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2007 CENELEC 0 or monitoring of protective measures - Part 7: Phase sequence 4052 EN 60976 Medical electrical equipment - Medical electron accelerators - Functional performance characteristics - Incorporates 2007 CENELEC 0 Amendment A1: 2000 4053 EN 60454-3-4 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose 2007 CENELEC 0 paper, creped and non-creped, with rubber thermosetting adhesive 4054 EN 60947-1 Low-voltage switchgear and controlgear - Part 1: General rules - Incorporates Amendment A2: 2014 2007 CENELEC 0 4055 EN 61169-16 Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer 2007 CENELEC 0 conductor 7 mm (0,276 in) with screw coupling - Characteristic impedance 50 ohms (75 ohms) (type N) 4056 EN 61987-1 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: 2007 CENELEC 0 Measuring equipment with analogue and digital output 4057 EN 61557-1 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2007 CENELEC 0 or monitoring of protective measures - Part 1: General requirements 4058 EN 60034-8 Rotating electrical machines - Part 8: Terminal markings and direction of rotation - Incorporates Amendment A1: 2014 2007 CENELEC 0 4059 EN 61937-2 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 2: Burst-info - 2007 CENELEC 0 Incorporates Amendment A1: 2011 4060 EN 62374 Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films 2007 CENELEC 0 4061 EN 60384-4-1 Fixed capacitors for use in electronic equipment - Part 4-1: Blank detail specification - Fixed aluminium electrolytic 2007 CENELEC 0 capacitors with non-solid electrolyte - Assessment level EZ - Incorporating Corrigendum April 2009 4062 EN 62310-2 Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements 2007 CENELEC 0 4063 EN 50377-8-5 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2007 CENELEC 0 Part 8-5: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U 4064 EN 60664-5 Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining 2007 CENELEC 0 clearances and creepage distances equal to or less than 2 mm 4065 EN 60384-18-1 Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolytic 2007 CENELEC 0 surface mount capacitors with solid (MnO2) electrolyte - Assessment level EZ 4066 EN 61300-2-22 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - 2007 CENELEC 0 Change of temperature 4067 EN 61340-3-2 Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test 2007 CENELEC 0 waveforms 4068 EN 61788-2 Superconductivity Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors 2007 CENELEC 0 4069 EN 60947-5-9 Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches 2007 CENELEC 0 4070 EN 61557-5 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2007 CENELEC 0 or monitoring of protective measures - Part 5: Resistance to earth 4071 EN 62137-1-2 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear 2007 CENELEC 0 strength test 4072 EN 50494 Satellite signal distribution over a single coaxial cable in single dwelling installations 2007 CENELEC 0 4073 EN 62317-1 Ferrite cores - Dimensions - Part 1: General specification 2007 CENELEC 0 4074 EN 140401-803 Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 - 2007 CENELEC 0 Incorporates Amendment A3: 2017 4075 EN 60904-9 Photovoltaic devices - Part 9: Solar simulator performance requirements 2007 CENELEC 0 4076 EN 61462 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage 2007 CENELEC 0 greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations 4077 EN 61169-8 Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 2007 CENELEC 0 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC) 4078 EN 60269-1 Low-voltage fuses - Part 1: General requirements - Incorporates Amendment A2: 2014 2007 CENELEC 0 4079 EN 62026-1 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules 2007 CENELEC 0 4080 EN 61181 Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical 2007 CENELEC 0 equipment - Incorporates Amendment A1: 2012 4081 EN 60915 Fixed capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the 2007 CENELEC 0 mounting of single-hole, bush-mounted, shaft-operated electronic components 4082 EN 50377-10-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2007 CENELEC 0 Part 10-1: Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category 4083 HD 620 S1/A3 Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV - Incorporating 2007 CENELEC 0 Corrigendum December 2007 4084 CLC/TR 50479 Electrical installation guide - Selection and erection of electrical equipment - Wiring systems - Limitation of temperature 2007 CENELEC 0 rise of connecting interfaces 4085 EN 50378-3-2 Passive components to be used in optical fibre communication systems - Product specifications - Part 3-2: Type 4 / 8 2007 CENELEC 0 channel CWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre 4086 EN 61290-10-4 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an 2007 CENELEC 0 optical spectrum analyzer 4087 EN 62226-3-1 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current 2007 CENELEC 0 density and internal electric field induced in the human body - Part 3-1: Exposure to electric fields - Analytical and 2D numerical m 4088 EN 61025 Fault tree analysis (FTA) 2007 CENELEC 0 4089 EN 60423 Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits 2007 CENELEC 0 and fittings 4090 EN 61937-9 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 9: Non-linear PCM 2007 CENELEC 0 bitstreams according to the MAT format 4091 EN 61557-3 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2007 CENELEC 0 or monitoring of protective measures - Part 3: Loop impedance 4092 EN 50377-8-7 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2007 CENELEC 0 Part 8-7: LSH-PC terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C 4093 EN 61300-3-15 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: 2007 CENELEC 0 Examinations and measurements - Dome eccentricity of a convex polished ferrule endface 4094 EN 62104 Characteristics of DAB receivers - Incorporating corrigendum August 2007 2007 CENELEC 0 4095 EN 61188-5-5 Printed boards and printed board assemblies - Design and use - Part 5-5: Attachment (land/joint) considerations - 2007 CENELEC 0 Components with gull-wing leads on four sides 4096 CLC/TR 50173- Cabling guidelines in support of 10 GBASE-T 2007 CENELEC 0 99-1 4097 EN 50464-4 Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment 2007 CENELEC 0 not exceeding 36 kV - Part 4: Requirements and tests concerning pressurised corrugated tanks - Incorporates Amendment A1: 2011 4098 EN 61968-4 Application integration at electric utilities - System interfaces for distribution management - Part 4: Interfaces for records 2007 CENELEC 0 and asset management 4099 EN 61937-1 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 1: General - Incorporates 2007 CENELEC 0 Amendment A1: 2011 4100 CLC/TR 50507 Railway applications Interference limits of existing track circuits used on European railways 2007 CENELEC 0 4101 EN 61290-7-1 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method 2007 CENELEC 0 4102 EN 50377-6-2 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - 2007 CENELEC 0 Part 6-2: SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U 4103 EN 50497 Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables 2007 CENELEC 0 4104 EN 60601-1-8 Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral 2007 CENELEC 0 Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems - Inc 4105 EN 50378-3-1 Passive components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type: 100/200 2007 CENELEC 0 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre 4106 EN 62127-3 Ultrasonics - Hydrophones - Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz - Incorporates 2007 CENELEC 0 Amendment A1: 2013 4107 EN 61000-6-3 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and 2007 CENELEC 0 light-industrial environments - Incorporates Amendment A1: 2011 4108 EN 60645-3 Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration 2007 CENELEC 0 4109 EN 61800-5-1 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy - 2007 CENELEC 0 Incorporates Amendment A1: 2017 4110 EN 81714-2 Design of Graphical Symbols for Use in the Technical Documentation of Products - Part 2: Specification for Graphical 2007 CENELEC 0 Symbols in a Computer Sensible Form, Including Graphical Symbols for a Reference Library, and Requirements for Their Interchange 4111 EN 61300-2-50 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - 2007 CENELEC 0 Fibre optic connector proof test with static load - Singlemode and multimode 4112 EN 60309-4 Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without 2007 CENELEC 0 interlock - Incorporates Amendment A1: 2012 4113 EN 62127-2 Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields up to 40 MHz - Incorporates Amendment A2: 2017 2007 CENELEC 0 4114 CLC/TS 50509 Use of LED signal heads in road traffic signal systems 2007 CENELEC 0 4115 EN 61071 Capacitors for power electronics 2007 CENELEC 0 4116 EN 60027-6 Letter symbols to be used in electrical technology - Part 6: Control technology 2007 CENELEC 0 4117 EN 61000-6-1 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light- 2007 CENELEC 0 industrial environments 4118 EN 61788-1 Superconductivity Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors 2007 CENELEC 0 4119 EN 60706-5 Maintainability of equipment - Part 5: Testability and diagnostic testing 2007 CENELEC 0 4120 EN 61557-4 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring 2007 CENELEC 0 or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding 4121 EN 62137-1-1 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull 2007 CENELEC 0 strength test 4122 EN 60519-11 Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic 2007 CENELEC 0 forces on liquid metals 4123 CLC/TR 50506- Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 1: 2007 CENELEC 0 1 Cross-acceptance 4124 EN 62402 Obsolescence management - Application guide 2007 CENELEC 0 4125 EN 62025-1 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface 2007 CENELEC 0 mounted inductors for use in electronic and telecommunication equipment 4126 EN 60384-4-2 Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolytic 2007 CENELEC 0 capacitors with solid (MnO2) electrolyte - Assessment level EZ - Incorporating Corrigendum April 2009 4127 EN 61193-2 Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and 2007 CENELEC 0 packages 4128 EN 61810-7 Electromechanical elementary relays Part 7: Test and measurement procedures 2006 CENELEC 0 4129 EN 62258-5 Semiconductor die products Part 5: Requirements for information concerning electrical simulation 2006 CENELEC 0 4130 EN 50461 Solar cells Datasheet information and product data for crystalline silicon solar cells 2006 CENELEC 0 4131 EN 60601-1 Medical electrical equipment Part 1: General requirements for basic safety and essential performance - Incorporates 2006 CENELEC 0 Amendment A12: 2014 4132 EN 62071-3 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 Part 3: Data stream 2006 CENELEC 0 format 4133 EN 61937-6 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 6: Non-linear PCM 2006 CENELEC 0 bitstreams according to the MPEG-2 AAC and MPEG-4 AAC audio formats - Incorporates Amendment A1: 2014 4134 EN 60371-3-1 Specification for Insulation Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 1: Commutator 2006 CENELEC 0 Separators and Materials 4135 EN 61788-7 Superconductivity Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave 2006 CENELEC 0 frequencies 4136 EN 61048 Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety 2006 CENELEC 0 requirements - Incorporates Amendment A1: 2016 4137 EN 60598-2-13 Luminaires Part 2-13: Particular requirements - Ground recessed luminaires - Incorporating Corrigendum December 2006; 2006 CENELEC 0 Incorporates Amendment A2: 2016 4138 EN 62141 Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 2006 CENELEC 0 compression - Type D-16 format 4139 EN 60519-2 Safety in electroheat installations Part 2: Particular requirements for resistance heating equipment 2006 CENELEC 0 4140 EN 60512-14-6 Connectors for electronic equipment - Tests and measurements Part 14-6: Sealing tests - Test 14f: Interfacial sealing 2006 CENELEC 0 4141 EN 50397-1 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 2006 CENELEC 0 kV a.c. Part 1: Covered conductors 4142 EN 50420 Basic standard for the evaluation of human exposure to electromagnetic fields from a stand alone broadcast transmitter (30 2006 CENELEC 0 MHz - 40 GHz) 4143 EN 50414 Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: 2006 CENELEC 0 Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by le 4144 EN 60297-3- Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 2006 CENELEC 0 104 3-104: Connector dependent interface dimensions of subracks and plug-in units 4145 EN 60512-12-2 Connectors for electronic equipment - Tests and measurements Part 12-2: Soldering tests - Test 12b: Solderability, wetting, 2006 CENELEC 0 soldering iron method - Incorporating corrigendum December 2006 4146 EN 60335-2-90 Household and similar electrical appliances Safety Part 2-90: Particular requirements for commercial microwave ovens - 2006 CENELEC 0 Incorporates Amendment A1: 2010 4147 EN 61338-1-4 Waveguide type dielectric resonators Part 1-4: General information and test conditions - Measurement method of complex 2006 CENELEC 0 relative permittivity for dielectric resonator materials at millimetre-wave frequency - Incorporating corrigendum November 2006 4148 EN 50441-3 Cables for indoor residential telecommunication installations Part 3: Screened cables - Grade 3 2006 CENELEC 0 4149 EN 50446 Straight thermocouple assembly with metal or ceramic protection tube and accessories 2006 CENELEC 0 4150 EN 60706-3 Maintainability of equipment Part 3: Verification and collection, analysis and presentation of data 2006 CENELEC 0 4151 EN 61300-3-32 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-32: 2006 CENELEC 0 Examinations and measurements - Polarization mode dispersion measurement for passive optical components 4152 EN 61076-1 Connectors for electronic equipment - Product requirements Part 1: Generic specification 2006 CENELEC 0 4153 EN 61760-1 Surface Mounting Technology Part 1: Standard Method for the Specification of Surface Mounting Components (SMDs) 2006 CENELEC 0 4154 EN 62231 Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test 2006 CENELEC 0 methods and acceptance criteria 4155 EN 61747-3 Liquid crystal display devices Part 3: Liquid crystal display (LCD) cells - Sectional specification 2006 CENELEC 0 4156 EN 60793-1-34 Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl 2006 CENELEC 0 4157 EN 60335-2-97 Household and similar electrical appliances - Safety Part 2-97: Particular requirements for drives for rolling shutters, 2006 CENELEC 0 awnings, blinds and similar equipment - Incorporates Amendment A12: 2015 4158 EN 60076-13 Power transformers Part 13: Self-protected liquid-filled transformers 2006 CENELEC 0 4159 EN 61033 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate 2006 CENELEC 0 4160 EN 60076-5 Power transformers Part 5: Ability to withstand short-circuit 2006 CENELEC 0 4161 EN 62047-3 Semiconductor devices - Micro-electromechanical devices Part 3: Thin film standard test piece for tensile testing 2006 CENELEC 0 4162 EN 61076-7- Connectors for electronic equipment - Product requirements Part 7-100: Cable outlet accessories - Detail specification for a 2006 CENELEC 0 100 metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system 4163 EN 62261-2 Television METADATA Part 2: Data encoding protocol using key-length-value 2006 CENELEC 0 4164 EN 62197-1 Connectors for electronic equipment Quality assessment requirements Part 1: Generic specification 2006 CENELEC 0 4165 EN 60512-12-3 Connectors for electronic equipment - Tests and measurements Part 12-3: Soldering tests - Test 12c: Solderability, de- 2006 CENELEC 0 wetting - Incorporating corrigendum December 2006 4166 EN 62373 Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) 2006 CENELEC 0 4167 EN 61061-1 Non-Impregnated Densified Laminated Wood for Electrical Purposes Part 1: Definitions, Designations and General 2006 CENELEC 0 Requirements 4168 EN 60512-14-5 Connectors for electronic equipment - Tests and measurements Part 14-5: Sealing tests - Test 14e: Immersion at low air 2006 CENELEC 0 pressure 4169 EN 61212-3-3 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes 2006 CENELEC 0 Part 3: Specifications for individual materials Sheet 3: Round laminated moulded rods 4170 EN 60512-12-4 Connectors for electronic equipment - Tests and measurements Part 12-4: Soldering tests - Test 12d: Resistance to 2006 CENELEC 0 soldering heat, solder bath method - Incorporating corrigendum December 2006 4171 EN 60950-23 Information technology equipment - Safety Part 23: Large data storage equipment - Incorporating corrigendum October 2006 CENELEC 0 2008 4172 EN 175301-801 Detail Specification: High density rectangular connectors, round removable crimp contacts 2006 CENELEC 0 4173 EN 60793-1-49 Optical fibres Part 1-49: Measurement methods and test procedures - Differential mode delay 2006 CENELEC 0 4174 EN 60352-2 Solderless Connections Part 2: Crimped Connections - General Requirements, Test Methods and Practical Guidance - 2006 CENELEC 0 Incorporates Amendment A1: 2013 4175 EN 62391-2-1 Fixed electric double-layer capacitors for use in electronic equipment Part 2-1: Blank detail specification - Electric-double 2006 CENELEC 0 layer capacitors for power application - Assessment level EZ 4176 EN 50085-2-1 Cable trunking systems and cable ducting systems for electrical installations Part 2-1: Cable trunking systems and cable 2006 CENELEC 0 ducting systems intended for mounting on walls and ceilings - Incorporates Amendment A1: 2011 4177 EN 61204-7 Low voltage power supplies, d.c. output Part 7: Safety requirements - Incorporates Amendment A11: 2009; Remains 2006 CENELEC 0 Current 4178 EN 60027-1 Letter symbols to be used in electrical technology Part 1: General - Incorporates Amendment A1: 2007 2006 CENELEC 0 4179 EN 60384-19-1 Fixed capacitors for use in electronic equipment Part 19-1: Blank detail specification - Fixed metallized polyethylene- 2006 CENELEC 0 terephthalate film dielectric surface mount d.c. capacitors - Assessment level EZ - Incorporating corrigendum November 2006 4180 CLC/TR 50489 Smart tracker chips - Feasibility study on the inclusion of RFID in Electrical and Electronic Equipment for WEEE 2006 CENELEC 0 management 4181 EN 61076-3- Connectors for electronic equipment - Product requirements Part 3-106: Rectangular connectors - Detail specification for 2006 CENELEC 0 106 protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 se 4182 EN 60384-25-1 Fixed capacitors for use in electronic equipment Part 25-1: Blank detail specification Surface mount fixed aluminium 2006 CENELEC 0 electrolytic capacitors with conductive polymer solid electrolyte Assessment level EZ 4183 EN 60825-4 Safety of laser products Part 4: Laser guards - Incorporates Amendment A2: 2011 2006 CENELEC 0 4184 EN 60335-2-14 Household and similar electrical appliances - Safety Part 2-14: Particular requirements for kitchen machines - Incorporates 2006 CENELEC 0 Amendment A12: 2016 4185 EN 60512-12-5 Connectors for electronic equipment - Tests and measurements Part 12-5: Soldering tests - Test 12e: Resistance to 2006 CENELEC 0 soldering heat, soldering iron method - Incorporating corrigendum December 2006 4186 EN 60556 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties - 2006 CENELEC 0 Incorporates Amendment A1: 2016 4187 HD 629.1 S2 Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV Part 1: 2006 CENELEC 0 Cables with extruded insulation - Incorporates Amendment A1: 2008 4188 EN 62304 Medical device software - Software life-cycle processes - Incorporating Corrigendum November 2008; Incorporates 2006 CENELEC 0 Amendment A1: 2015 4189 EN 61315 Calibration of Fibre Optic Power Meters 2006 CENELEC 0 4190 EN 61391-1 Ultrasonics - Pulse-echo scanners Part 1: Techniques for calibrating spatial measurement systems and measurement of 2006 CENELEC 0 system point-spread function response - Incorporates Amendment A1: 2017 4191 CLS/TS 50466 Long duration storage of electronic components Specification for implementation 2006 CENELEC 0 4192 EN 60454-3-8 Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 8: Woven 2006 CENELEC 0 fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre - Incorporating C 4193 EN 61747-3-1 Liquid crystal display devices Part 3-1: Liquid crystal display (LCD) cells - Blank detail specification 2006 CENELEC 0 4194 EN 61212-2 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes 2006 CENELEC 0 Part 2: Methods of test 4195 EN 61788-10 Superconductivity Part 10: Critical temperature measurement Critical temperature of composite superconductors by a 2006 CENELEC 0 resistance method 4196 EN 61966-2-4 Multimedia systems and equipment - Colour measurement and management Part 2-4: Colour management - Extended- 2006 CENELEC 0 gamut YCC colour space for video applications - xvYCC - Incorporates Amendment A1: 2016 4197 EN 60534-4 Industrial-process control valves Part 4: Inspection and routine testing 2006 CENELEC 0 4198 EN 62071-1 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 Part 1: VTR 2006 CENELEC 0 specifications 4199 EN 61755-3-6 Fibre optic connector optical interfaces Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees 2006 CENELEC 0 angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre - Incorporates Amendment A1: 2012 4200 EN 61756-1 Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems Part 1: 2006 CENELEC 0 General and guidance 4201 EN 60684-3- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 233: Heat-shrinkable 2006 CENELEC 0 233 fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 4202 EN 61212-1 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes 2006 CENELEC 0 Part 1: Definitions, designations and general requirements 4203 EN 62317-9 Ferrite cores - Dimensions Part 9: Planar cores - Incorporates Amendment A1: 2007 2006 CENELEC 0 4204 EN 60371-3-2 Insulating materials based on mica Part 3: Specifications for individual materials Sheet 2: Mica paper 2006 CENELEC 0 4205 EN 61076-3- Connectors for electronic equipment Part 3-112: Rectangular connectors Detail specification for rectangular connectors 2006 CENELEC 0 112 with four contacts for high performance serial bus for consumer audio/video equipment 4206 EN 50050 Electrical Apparatus for Potentially Explosive Atmospheres - Electrostatic Hand-Held Spraying Equipment 2006 CENELEC 0 4207 EN 61755-3-5 Fibre optic connector optical interfaces Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC 2006 CENELEC 0 composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre 4208 EN 50419 Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE) 2006 CENELEC 0 4209 EN 60904-1 Photovoltaic devices Part 1: Measurement of photovoltaic current-voltage characteristics 2006 CENELEC 0 4210 EN 50421 Product standard to demonstrate the compliance of stand alone broadcast transmitters with the reference levels or the basic 2006 CENELEC 0 restrictions related to public human exposure to radio frequency electromagnetic fields (30 MHz - 40 GHz) 4211 EN 61753-101- Fibre optic interconnecting devices and passive components performance standard - Part 101-2: Fibre management systems 2006 CENELEC 0 2 for category C - Controlled environment 4212 EN 60519-4 Safety in electroheat installations Part 4: Particular requirements for arc furnace installations 2006 CENELEC 0 4213 EN 61189-6 Test methods for electrical materials, interconnection structures and assemblies Part 6: Test methods for materials used in 2006 CENELEC 0 manufacturing electronic assemblies 4214 EN 60068-2-21 Environmental Testing - Part 2-21: Tests - Test U: Robustness of Terminations and Integral Mounting Devices 2006 CENELEC 0 4215 EN 60870-5- Telecontrol equipment and systems Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using 2006 CENELEC 0 104 standard transport profiles - Incorporates Amendment A1: 2016 4216 EN 60371-3-5 Insulating materials based on mica Part 3: Specifications for individual materials Sheet 5: Glass-backed mica paper with an 2006 CENELEC 0 epoxy resin binder for post-impregnation (VPI) 4217 EN 60512-14-2 Connectors for electronic equipment - Tests and measurements Part 14-2: Sealing tests - Test 14b: Sealing - Fine air 2006 CENELEC 0 leakage 4218 EN 60684-3- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 212: Heat-shrinkable polyolefin 2006 CENELEC 0 212 sleevings 4219 EN 60384-13-1 Fixed capacitors for use in electronic equipment Part 13-1: Blank detail specification - Fixed polypropylene film dielectric 2006 CENELEC 0 metal foil d.c. capacitors - Assessment level E 4220 HD 629.2 S2 Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV Part 2: 2006 CENELEC 0 Cables with impregnated paper insulation - Incorporates Amendment A1: 2008 4221 EN 61754-13 Fibre optic connector interfaces Part 13: Type FC-PC connector 2006 CENELEC 0 4222 EN 60670-22 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 22: Particular 2006 CENELEC 0 requirements for connecting boxes and enclosures 4223 EN 61937-5 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 5: Non-linear PCM 2006 CENELEC 0 bitstreams according to the DTS (Digital Theater Systems) format(s) 4224 EN 62329-1 Heat shrinkable moulded shapes Part 1: Definitions and general requirements - Incorporating Corrigendum December 2006 2006 CENELEC 0 4225 EN 62271-108 High-voltage switchgear and controlgear Part 108: High-voltage alternating current disconnecting circuit-breakers for rated 2006 CENELEC 0 voltages of 72,5 kV and above 4226 EN 62076 Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces 2006 CENELEC 0 4227 EN 62317-8 Ferrite cores - Dimensions Part 8: E-cores 2006 CENELEC 0 4228 EN 60704-3 Household and similar electrical appliances â__ Test code for the determination of airborne acoustical noise Part 3: 2006 CENELEC 0 Procedure for determining and verifying declared noise emission values - Remains Current 4229 EN 60898-2 Circuit-Breakers for Overcurrent Protection for Household and Similar Installations Part 2: Circuit-Breakers for A.C. and 2006 CENELEC 0 D.C. Operation 4230 EN 61290-5-1 Optical amplifiers - Test methods Part 5-1: Reflectance parameters - Optical spectrum analyzer method 2006 CENELEC 0 4231 EN 60947-5-8 Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements - Three-position enabling 2006 CENELEC 0 switches 4232 EN 60512-13-1 Connectors for electronic equipment - Tests and measurements Part 13-1: Mechanical operation tests - Test 13a: Engaging 2006 CENELEC 0 and separating forces - Incorporates Corringendum December 2006 4233 EN 61300-3-18 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-18: 2006 CENELEC 0 Examinations and Measurements Keying Accuracy of an Angled Endface Connector 4234 EN 61163-1 Reliability stress screening Part 1: Repairable assemblies manufactured in lots 2006 CENELEC 0 4235 EN 61000-4-3 Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, 2006 CENELEC 0 electromagnetic field immunity test - Incorporates Amendment A2: 2010 4236 EN 61300-2-14 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests - 2006 CENELEC 0 Optical power handling and damage threshold characterization 4237 EN 175301-803 Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable 2006 CENELEC 0 4238 EN 62308 Equipment reliability - Reliability assessment methods 2006 CENELEC 0 4239 EN 62314 Solid-state relays 2006 CENELEC 0 4240 CLC/TR 50450 Resistibility requirements for equipment having (a) telecommunication port(s) 2006 CENELEC 0 4241 EN 61280-2-11 Fibre optic communication subsystem test procedures Part 2-11: Digital systems - Averaged Q-factor determination using 2006 CENELEC 0 amplitude histogram evaluation for optical signal quality monitoring 4242 EN 61308 High-Frequency Dielectric Heating Installations Test Methods for the Determination of Power Output 2006 CENELEC 0 4243 EN 62389 Methods of measurement for DVD players 2006 CENELEC 0 4244 EN 61300-2-46 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-46: Tests Damp 2006 CENELEC 0 heat cyclic 4245 EN 60455-3-5 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 5: 2006 CENELEC 0 Unsaturated polyester based impregnating resins 4246 EN 62132-5 Integrated circuits Measurement of electromagnetic immunity, 150 kHz to 1 GHz Part 5: Workbench Faraday cage method 2006 CENELEC 0 4247 CLC/TR 62102 Electrical safety Classification of interfaces for equipment to be connected to information and ommunications technology 2006 CENELEC 0 networks 4248 EN 62403 High density recording format on CD-R/RW disc system - HD-BURN format 2006 CENELEC 0 4249 EN 62329-2 Heat shrinkable moulded shapes Part 2: Methods of test 2006 CENELEC 0 4250 EN 61924 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Operational and 2006 CENELEC 0 performance requirements, methods of testing and required test results 4251 EN 60384-24-1 Fixed capacitors for use in electronic equipment Part 24-1: Blank detail specification Surface mount fixed tantalum 2006 CENELEC 0 electrolytic capacitors with conductive polymer solid electrolyte Assessment level EZ 4252 EN 60464-1 Varnishes used for electrical insulation Part 1: Definitions and general requirements - Incorporates Amendment A1: 2006 2006 CENELEC 0 4253 EN 60512-13-5 Connectors for electronic equipment - Tests and measurements Part 13-5: Mechanical operation tests - Test 13e: Polarizing 2006 CENELEC 0 and keying method - Incorporating corrigendum December 2006 4254 EN 61582 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for 2006 CENELEC 0 portable, transportable and installed equipment 4255 EN 62059-41 Electricity metering equipment - Dependability Part 41: Reliability prediction 2006 CENELEC 0 4256 EN 60669-2-2 Switches for household and similar fixed electrical installations Part 2-2: Particular requirements - Electromagnetic remote- 2006 CENELEC 0 control switches (RCS) 4257 EN 61755-1 Fibre optic connector optical interfaces Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General 2006 CENELEC 0 and guidance - Incorporating corrigendum December 2006 4258 EN 60454-3-2 Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Polyester 2006 CENELEC 0 Film Tapes with Rubber Thermosetting or Acrylic Crosslinked Adhesives 4259 EN 60738-1 Thermistors - Directly heated positive temperature coefficient Part 1: Generic specification - Incorporates Amendment A1: 2006 CENELEC 0 2009 4260 EN 50214 Flat polyvinyl chloride sheathed flexible cables 2006 CENELEC 0 4261 EN 60730-2-12 Automatic electrical controls for household and similar use Part 2-12: Particular requirements for electrically operated door 2006 CENELEC 0 locks - Incorporates Amendment A11: 2008 4262 EN 60556 Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties - 2006 CENELEC 0 Incorporates Amendment A1: 2016 4263 EN 60512-12-1 Connectors for electronic equipment - Tests and measurements Part 12-1: Soldering tests - Test 12a: Solderability, wetting, 2006 CENELEC 0 solder bath method 4264 EN 62047-1 Semiconductor devices - Micro-electromechanical devices Part 1: Terms and definitions 2006 CENELEC 0 4265 EN 61966-7-1 Multimedia Systems and Equipment - Colour Measurement and Management Part 7-1: Colour Printers - Reflective Prints - 2006 CENELEC 0 RGB Inputs 4266 EN 61165 Application of Markov techniques 2006 CENELEC 0 4267 EN 61189-5 Test methods for electrical materials, interconnection structures and assemblies Part 5: Test methods for printed board 2006 CENELEC 0 assemblies 4268 EN 62333-2 Noise suppression sheet for digital devices and equipment Part 2: Measuring methods - Incorporates Amendment A1: 2015 2006 CENELEC 0 4269 EN 62071-2 Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 Part 2: Compression 2006 CENELEC 0 format 4270 EN 60194 Printed board design, manufacture and assembly - Terms and definitions 2006 CENELEC 0 4271 EN 60749-35 Semiconductor devices Mechanical and climatic test methods Part 35: Acoustic microscopy for plastic encapsulated 2006 CENELEC 0 electronic components 4272 EN 60512-13-2 Connectors for electronic equipment - Tests and measurements Part 13-2: Mechanical operation tests - Test 13b: Insertion 2006 CENELEC 0 and withdrawal forces - Incorporating corrigendum December 2006 4273 EN 50131-1 Alarm systems - Intrusion and hold-up systems Part 1: System requirements - Incorporates Amendment A2: 2017 2006 CENELEC 0 4274 EN 61925 Multimedia systems and equipment - Multimedia home server systems - Vocabulary of home server 2006 CENELEC 0 4275 EN 60216-4-1 Electrical insulating materials - Thermal endurance properties Part 4-1: Ageing ovens - Single-chamber ovens 2006 CENELEC 0 4276 EN 61300-2-38 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-38: Tests - 2006 CENELEC 0 Sealing for pressurized fibre optic closures 4277 EN 62384 DC or AC supplied electronic control gear for LED modules - Performance requirements - Incorporates Amendment A1: 2006 CENELEC 0 2009 4278 EN 60950-1 Information technology equipment - Safety Part 1: General requirements - Incorporates Amendment A2: 2013; Remains 2006 CENELEC 0 Current 4279 EN 60706-2 Maintainability of equipment Part 2: Maintainability requirements and studies during the design and development phase 2006 CENELEC 0 4280 EN 60320-2-4 Appliance couplers for household and similar general purposes Part 2-4: Couplers dependent on appliance weight for 2006 CENELEC 0 engagement - Incorporates Amendment A1: 2009 4281 EN 62261-1 Television METADATA Part 1: Metadata dictionary structure 2006 CENELEC 0 4282 EN 62258-6 Semiconductor die products Part 6: Requirements for information concerning thermal simulation 2006 CENELEC 0 4283 EN 60454-3-12 Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 12: 2006 CENELEC 0 Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive 4284 EN 60917-2-3 Modular order for the development of mechanical structures for electronic equipment practices Part 2-3: Sectional 2006 CENELEC 0 specification - Interface co-ordination dimensions for the 25 mm equipment practice - Extended detail specification - Dimensions for subracks 4285 EN 61970-501 Energy management system application program interface (EMS-API) Part 501: Common Information Model Resource 2006 CENELEC 0 Description Framework (CIM RDF) schema 4286 EN 60749-39 Semiconductor devices - Mechanical and climatic test methods Part 39: Measurement of moisture diffusivity and water 2006 CENELEC 0 solubility in organic materials used for semiconductor components 4287 EN 50194-2 Electrical apparatus for the detection of combustible gases in domestic premises Part 2: Electrical apparatus for continuous 2006 CENELEC 0 operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirem 4288 EN 61970-1 Energy management system application program interface (EMS-API) Part 1: Guidelines and general requirements 2006 CENELEC 0 4289 EN 60127-1 Miniature fuses Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links - Incorporates 2006 CENELEC 0 Amendment A2: 2015 4290 EN 60749-27 Semiconductor devices - Mechanical and climatic test methods Part 27: Electrostatic discharge (ESD) sensitivity testing - 2006 CENELEC 0 Machine model (MM) - Incorporates Amendment A1: 2012 4291 EN 60216-3 Electrical insulating materials - Thermal endurance properties Part 3: Instructions for calculating thermal endurance 2006 CENELEC 0 characteristics 4292 EN 62132-4 Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz Part 4: Direct RF power injection 2006 CENELEC 0 method 4293 EN 60669-2-3 Switches for household and similar fixed electrical installations Part 2-3: Particular requirements - Time delay switches 2006 CENELEC 0 (TDS) 4294 EN 60071-1 Insulation co-ordination Part 1: Definitions, principles and rules - Incorporates Amendment A1: 2010 2006 CENELEC 0 4295 EN 61755-2-2 Fibre optic connector optical interfaces Part 2-2: Optical interface standard single mode angled physically contacting fibres 2006 CENELEC 0 4296 EN 55016-1-3 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-3: Radio disturbance and 2006 CENELEC 0 immunity measuring apparatus - Ancillary equipment - Disturbance power - Incorporates Amendment A1: 2016 4297 EN 61267 Medical diagnostic X-ray equipment Radiation conditions for use in the determination of characteristics 2006 CENELEC 0 coupler for the measurement of hearing aids and 2006 CENELEC 0 _آEN 60318-5 Electroacoustics - Simulators of human head and ear Part 5: 2 cm 4298 earphones coupled to the ear by means of ear inserts 4299 EN 60384-3-1 Fixed capacitors for use in electronic equipment Part 3-1: Blank detail specification: Surface mount fixed tantalum 2006 CENELEC 0 electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ - Incorporating Corrigendum April 2009 4300 EN 61755-2-1 Fibre optic connector optical interfaces Part 2-1: Optical interface standard single mode non-angled physically contacting 2006 CENELEC 0 fibres 4301 EN 60958-3 Digital audio interface Part 3: Consumer applications - Incorporates Amendment A2: 2015 2006 CENELEC 0 4302 EN 60060-3 High voltage test techniques Part 3: Definitions and requirements for on-site tests - Incorporating Corrigendum October 2006 CENELEC 0 2006 4303 EN 60838-2-2 Miscellaneous lampholders Part 2-2: Particular requirements - Connectors for LED-modules - Incorporates Amendment 2006 CENELEC 0 A1: 2012 4304 EN 61606-4 Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics Part 4: 2006 CENELEC 0 Personal computer 4305 EN 61189-2 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 2: Test 2006 CENELEC 0 methods for materials for interconnection structures 4306 EN 62047-2 Semiconductor devices Micro-electromechanical devices Part 2: Tensile testing method of thin film materials 2006 CENELEC 0 4307 EN 60512-14-4 Connectors for electronic equipment - Tests and measurements Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof 2006 CENELEC 0 4308 EN 61966-6 Multimedia systems and equipment - Colour measurement and management Part 6: Front projection displays 2006 CENELEC 0 4309 EN 60034-26 Rotating electrical machines Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction 2006 CENELEC 0 motors 4310 EN 60216-6 Electrical insulating materials - Thermal endurance properties Part 6: Determination of thermal endurance indices (TI and 2006 CENELEC 0 RTE) of an insulating material using the fixed time frame method 4311 EN 60664-4 Insulation coordination for equipment within low-voltage systems Part 4: Consideration of high-frequency voltage stress - 2006 CENELEC 0 Incorporating Corrigendum October 2006 4312 EN 60335-2- Household and similar electrical appliances - Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning 2006 CENELEC 0 102 appliances having electrical connections - Incorporates Amendment A2: 2016 4313 EN 62333-1 Noise suppression sheet for digital devices and equipment Part 1: Definitions and general properties 2006 CENELEC 0 4314 EN 61788-3 Superconductivity Part 3: Critical current measurement - DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide 2006 CENELEC 0 superconductors 4315 EN 50428 Switches for household and similar fixed electrical installations Collateral standard Switches and related accessories for use 2005 CENELEC 0 in home and building electronic systems (HBES) - Incorporates Amendment A2: 2009; Remains Current 4316 EN 50363-1 Insulating, sheathing and covering materials for low voltage energy cables Part 1: Cross-linked elastomeric insulating 2005 CENELEC 0 compounds 4317 EN 62297-1 Triggering messages for broadcast applications Part 1: Format 2005 CENELEC 0 4318 EN 50363-4-1 Insulating, sheathing and covering materials for low voltage energy cables Part 4-1: PVC sheathing compounds 2005 CENELEC 0 4319 EN 60695-6-1 Fire hazard testing Part 6-1: Smoke obscuration General guidance - Incorporates Amendment A1: 2010 2005 CENELEC 0 4320 EN 62345 ID format for 50 mm magneto-optical disc system 2005 CENELEC 0 4321 EN 60939-2 Passive filter units for electromagnetic interference suppression Part 2: Sectional specification: Passive filter units for 2005 CENELEC 0 which safety tests are appropriate Test methods and general requirements 4322 EN 60068-2-80 Environmental testing Part 2-80: Tests Test Fi: Vibration Mixed mode 2005 CENELEC 0 4323 EN 60998-2-4 Connecting devices for low voltage circuits for household and similar purposes Part 2-4: Particular requirements for twist- 2005 CENELEC 0 on connecting devices 4324 EN 60335-2-58 Household and similar electrical appliances Safety Part 2-58: Particular requirements for commercial electric dishwashing 2005 CENELEC 0 machines - Incorporates Amendment A12: 2016 4325 EN 61338-4 Waveguide type dielectric resonators Part 4: Sectional specification 2005 CENELEC 0 4326 EN 62115 Electric toys Safety - Incorporates Amendment A12: 2015 2005 CENELEC 0 4327 EN 61249-2-2 Materials for printed boards and other interconnecting structures Part 2-2: Reinforced base materials, clad and unclad 2005 CENELEC 0 Phenolic cellulose paper reinforced laminate sheets, high electrical grade, copper-clad 4328 EN 61034-1 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus - Incorporates 2005 CENELEC 0 Amendment A1: 2014 4329 EN 60728-7-2 Cable networks for television signals, sound signals and interactive services Part 7-2: Hybrid Fibre Coax Outside Plant 2005 CENELEC 0 Status Monitoring Media access Control (MAC) Layer Specification 4330 EN 62298-2 Teleweb application Part 2: Delivery methods 2005 CENELEC 0 4331 EN 60254-1 Lead-acid traction batteries Part 1: General requirements and methods of test 2005 CENELEC 0 4332 EN 60068-2-30 Environmental Testing - Part 2: Tests - Test Db and Guidance: Damp Heat, Cyclic (12 + 12 Hour Cycle) 2005 CENELEC 0 4333 EN 61300-3-1 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-1: 2005 CENELEC 0 Examinations and Measurements - Visual Examination 4334 EN 61243-1 Live working Voltage detectors Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. - Incorporates 2005 CENELEC 0 Amendment A1: 2010 4335 EN 61249-2-23 Materials for printed boards and other interconnecting structures Part 2-23: Reinforced base materials, clad and unclad 2005 CENELEC 0 Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad 4336 EN 61058-2-4 Switches for appliances Part 2-4: Particular requirements for independently mounted switches 2005 CENELEC 0 4337 EN 61249-2-1 Materials for printed boards and other interconnecting structures Part 2-1: Reinforced base materials, clad and unclad 2005 CENELEC 0 Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad 4338 EN 60118-8 Electroacoustics Hearing aids Part 8: Methods of measurement of performance characteristics of hearing aids under 2005 CENELEC 0 simulated in situ working conditions 4339 EN 61249-2-26 Materials for printed boards and other interconnecting structures Part 2-26: Reinforced base materials, clad and unclad 2005 CENELEC 0 Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-cla 4340 EN 61754-10 Fibre Optic Connector Interfaces Part 10: Type Mini-MPO Connector Family 2005 CENELEC 0 4341 EN 62298-4 TeleWeb application Part 4: Hyperteletext profile 2005 CENELEC 0 4342 EN 62298-3 Teleweb application Part 3: Superteletext profile 2005 CENELEC 0 4343 EN 62053-52 Electricity metering equipment (AC) - Particular requirements Part 52: Symbols 2005 CENELEC 0 4344 EN 50369 Liquid tight sheathing systems for cable management 2005 CENELEC 0 4345 EN 60300-3-2 Dependability management Part 3-2: Application guide Collection of dependability data from the field 2005 CENELEC 0 4346 EN 62317-7 Ferrite cores Dimensions Part 7: EER-cores 2005 CENELEC 0 4347 EN 62300 Consumer audio/video equipment digital interface with plastic optical fibre 2005 CENELEC 0 4348 EN 61300-2-42 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static 2005 CENELEC 0 side load for connectors 4349 EN 60779 Industrial electroheat equipment Test methods for electroslag remelting furnaces 2005 CENELEC 0 4350 EN 60749-30 Semiconductor devices - Mechanical and climatic test methods Part 30: Preconditioning of non-hermetic surface mount 2005 CENELEC 0 devices prior to reliability testing - Incorporates Amendment A1: 2011 4351 EN 62317-4 Ferrite cores - Dimensions Part 4: RM-cores and associated parts 2005 CENELEC 0 4352 EN 60401-1 Terms and nomenclature for cores made of magnetically soft ferrites Part 1: Terms used for physical irregularities 2005 CENELEC 0 4353 EN 60728-7-1 Cable networks for television signals, sound signals and interactive services Part 7-1: Hybrid Fibre Coax Outside Plant 2005 CENELEC 0 Status Monitoring Physical (PHY) Layer Specification - Incorporates Amendment A1: 2015 4354 EN 61169-29 Radio-frequency connectors Part 29: Sectional specification Miniature radio frequency coaxial connectors model screw, 2005 CENELEC 0 snap-on, push-pull or quick-lock, slide-in (rack and panel applications) Characteristic impedance 50 ohms (type 1,0/2,3) 50 ohms and 75 o 4355 EN 61338-4-1 Waveguide type dielectric resonators Part 4-1: Blank detail specification 2005 CENELEC 0 4356 EN 61249-2-22 Materials for printed boards and other interconnecting structures Part 2-22: Reinforced base materials, clad and unclad 2005 CENELEC 0 Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper- clad 4357 EN 60670-1 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General 2005 CENELEC 0 requirements - Incorporates Amendment A1: 2013 4358 EN 60068-2-47 Environmental testing Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests 2005 CENELEC 0 4359 EN 61249-4-11 Materials for printed boards and other interconnecting structures Part 4-11: Sectional specification set for prepreg materials, 2005 CENELEC 0 unclad Non-halogenated epoxide, woven E-glass prepreg of defined flammability 4360 EN 60669-2-4 Switches for household and similar fixed electrical installations Part 2-4: Particular requirements - Isolating switches 2005 CENELEC 0 4361 EN 62328-2 Multimedia home server systems Interchangeable volume/file structure adaptation for broadcasting receivers Part 2: 2005 CENELEC 0 General recording structure 4362 EN 60384-17 Fixed capacitors for use in electronic equipment Part 17: Sectional specification: Fixed metallized polypropylene film 2005 CENELEC 0 dielectric a.c. and pulse capacitors - Remains Current 4363 EN 60068-2-10 Environmental testing Part 2-10: Tests Test J and guidance: Mould growth - Incorporates Amendment A1: 2018 2005 CENELEC 0 4364 CLC/TS 50429 Optical fibre cables Sewer cables Family specification for cables to be installed in storm and sanitary sewers 2005 CENELEC 0 4365 EN 50363-2-1 Insulating, sheathing and covering materials for low voltage energy cables Part 2-1: Cross-linked elastomeric sheathing 2005 CENELEC 0 compounds - Incorporates Amendment A1: 2011 4366 EN 61558-1 Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and tests - 2005 CENELEC 0 Incorporates Amendment A1: 2009; Incorporating corrigendum August 2006 4367 EN 50290-2-1 Communication cables Part 2-1: Common design rules and construction 2005 CENELEC 0 4368 EN 50416 Household and similar electrical appliances Safety Particular requirements for commercial electric conveyor dishwashing 2005 CENELEC 0 machines - Incorporates Amendment A1: 2015 4369 EN 60684-3- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 216: Heat-shrinkable, flame- 2005 CENELEC 0 216 retarded, limited-fire hazard sleeving - Incorporates Amendment A2: 2014 4370 EN 60384-16 Fixed capacitors for use in electronic equipment Part 16: Sectional specification: Fixed metallized polypropylene film 2005 CENELEC 0 dielectric d.c. capacitors 4371 EN 60923 Auxiliaries for lamps Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements - 2005 CENELEC 0 Incorporates Amendment A1: 2006 4372 EN 60336 Medical electrical equipment X-ray tube assemblies for medical diagnosis Characteristics of focal spots 2005 CENELEC 0 4373 EN 50363-3 Insulating, sheathing and covering materials for low voltage energy cables Part 3: PVC insulating compounds - 2005 CENELEC 0 Incorporates Amendment A1: 2011 4374 EN 61249-4-12 Materials for printed boards and other interconnecting structures Part 4-12: Sectional specification set for prepreg materials, 2005 CENELEC 0 unclad Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability 4375 EN 61300-2-18 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry 2005 CENELEC 0 heat High temperature endurance 4376 CLC/TS 62367 Safety aspects for xDSL signals on circuits connected to telecommunication networks (DSL: Digital Subscriber Line) 2005 CENELEC 0 4377 EN 60216-2 Electrical insulating materials Thermal endurance properties Part 2: Determination of thermal endurance properties of 2005 CENELEC 0 electrical insulating materials Choice of test criteria 4378 CLC/TS 50459- Railway applications Communication, signalling and processing systems European Rail Traffic Management System 2005 CENELEC 0 5 Driver-Machine Interface Part 5: Symbols 4379 EN 62150-1 Fibre optic active components and devices Test and measurement procedures Part 1: General and guidance 2005 CENELEC 0 4380 EN 50363-8 Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halogen-free, thermoplastic sheathing 2005 CENELEC 0 compounds - Incorporates Amendment A1: 2011 4381 EN 50363-2-2 Insulating, sheathing and covering materials for low voltage energy cables Part 2-2: Cross-linked elastomeric covering 2005 CENELEC 0 compounds 4382 EN 50090-5-1 Home and Building Electronic Systems (HBES) Part 5-1: Media and media dependent layers - Power line for HBES Class 2005 CENELEC 0 1 4383 EN 61400-1 Wind turbines Part 1: Design requirements - Incorporates Amendment A1: 2010 2005 CENELEC 0 4384 EN 62061 Safety of machinery Functional safety of safety-related electrical, electronic and programmable electronic control systems - 2005 CENELEC 0 Incorporating Corrigendum February 2010; Incorporates Amendment A2: 2015 4385 EN 50412-2-1 Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 2005 CENELEC 0 MHz Part 2-1: Residential, commercial and industrial environment Immunity requirements 4386 EN 62237 Live working Insulating hoses with fittings for use with hydraulic tools and equipment 2005 CENELEC 0 4387 EN 60519-3 Safety in electroheat installations Part 3: Particular requirements for induction and conduction heating and induction 2005 CENELEC 0 melting installations 4388 CLC/TS 50459- Railway applications Communication, signalling and processing systems European Rail Traffic Management System 2005 CENELEC 0 4 Driver-Machine Interface Part 4: Data entry for the ERTMS/ETCS/GSM-R systems 4389 EN 62093 Balance-of-system components for photovoltaic systems Design qualification natural environments 2005 CENELEC 0 4390 EN 50370-1 Electromagnetic compatibility (EMC) Product family standard for machine tools Part 1: Emission 2005 CENELEC 0 4391 CLC/TS 61970- Energy management system application program interface (EMS-API) Part 2: Glossary 2005 CENELEC 0 2 4392 EN 61300-3-37 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-37: 2005 CENELEC 0 Examinations and measurements Endface angle of angle-polished optical fibres - Remains Current 4393 EN 60228 Conductors of insulated cables 2005 CENELEC 0 4394 EN 60704-2-5 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-5: Particular 2005 CENELEC 0 requirements for electric thermal storage room heaters - Incorporates Amendment A1: 2015 4395 EN 60947-6-1 Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment Transfer switching equipment - 2005 CENELEC 0 Incorporates Amendment A1: 2014 4396 EN 62008 Performance characteristics and calibration methods for digital data acquisition systems and relevant software 2005 CENELEC 0 4397 EN 60034-9 Rotating Electrical Machines Part 9: Noise Limits - Incorporates Amendment A1: 2007 2005 CENELEC 0 4398 EN 61249-4-5 Materials for printed boards and other interconnecting structures Part 4-5: Sectional specification set for prepreg materials, 2005 CENELEC 0 unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability 4399 EN 50363-4-2 Insulating, sheathing and covering materials for low voltage energy cables Part 4-2: PVC covering compounds 2005 CENELEC 0 4400 EN 62298-1 Teleweb application Part 1: General description 2005 CENELEC 0 4401 EN 61754-22 Fibre optic connector interfaces Part 22: Type F-SMA connector family 2005 CENELEC 0 4402 EN 60384-2-1 Fixed capacitors for use in electronic equipment Part 2-1: Blank detail specification: Fixed metallized polyethylene- 2005 CENELEC 0 terephthalate film dielectric d.c. capacitors Assessment levels E and EZ 4403 EN 50363-6 Insulating, sheathing and covering materials for low voltage energy cables Part 6: Halogen-free, cross-linked sheathing 2005 CENELEC 0 compounds - Incorporates Amendment A1: 2011 4404 EN 62025-2 High frequency inductive components Non-electrical characteristics and measuring methods Part 2: Test methods for non- 2005 CENELEC 0 electrical characteristics 4405 EN 50396 Non electrical test methods for low voltage energy cables - Incorporates Amendment A1: 2011 2005 CENELEC 0 4406 EN 61249-4-2 Materials for printed boards and other interconnecting structures Part 4-2: Sectional specification set for prepreg materials, 2005 CENELEC 0 unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability 4407 EN 60308 Hydraulic turbines Testing of control systems 2005 CENELEC 0 4408 EN 60239 Graphite electrodes for electric arc furnaces Dimensions and designation 2005 CENELEC 0 4409 EN 60519-9 Safety in electroheat installations Part 9: Particular requirements for high-frequency dielectric heating installations 2005 CENELEC 0 4410 EN 61160 Design review 2005 CENELEC 0 4411 EN 50085-1 Cable trunking systems and cable ducting systems for electrical installations Part 1: General requirements - Incorporates 2005 CENELEC 0 Amendment A1: 2013 4412 EN 50289-1-12 Communication cables - Specifications for test methods Part 1-12: Electrical test methods - Inductance 2005 CENELEC 0 4413 EN 61754-21 Fibre optic connector interfaces Part 21: Type SMI connector family for plastic optical fibre 2005 CENELEC 0 4414 EN 61019-1 Surface acoustic wave (SAW) resonators Part 1: Generic specification 2005 CENELEC 0 4415 EN 50065-4-7 Signalling on lowvoltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Part 4- 2005 CENELEC 0 7: Portable low voltage decoupling filters - Safety requirements - Incorporating corrigendum October 2006 4416 EN 61754-5 Fibre Optic Connector Interfaces Part 5: Type MT Connector Family 2005 CENELEC 0 4417 EN 50117-2-1 Coaxial cables Part 2-1: Sectional specification for cables used in cabled distribution networks Indoor drop cables for 2005 CENELEC 0 systems operating at 5 MHz - 1 000 MHz - Incorporates Amendment A2: 2013 4418 EN 61280-2-10 Fibre optic communication subsystem test procedures Part 2-10: Digital systems Time-resolved chirp and alpha-factor 2005 CENELEC 0 measurement of laser transmitters 4419 EN 61883-5 Consumer audio/video equipment - Digital interface Part 5: SDL-DVCR data transmission 2005 CENELEC 0 4420 EN 62319-1 Polymeric thermistors - Directly heated positive step function temperature coefficient Part 1: Generic specification 2005 CENELEC 0 4421 EN 62226-2-1 Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current 2005 CENELEC 0 density and internal electric field induced in the human body Part 2-1: Exposure to magnetic fields 2D models 4422 EN 62124 Photovoltaic (PV) stand-alone systems Design verification 2005 CENELEC 0 4423 EN 50363-5 Insulating, sheathing and covering materials for low voltage energy cables - Part 5: Halogen-free, cross-linked insulating 2005 CENELEC 0 compounds - Incorporates Amendment A1: 2011 4424 EN 60512-25-7 Connectors for electronic equipment Tests and measurements Part 25-7: Test 25g Impedance, reflection coefficient and 2005 CENELEC 0 voltage standing wave ratio (VSWR) 4425 EN 61290-1-2 Optical amplifiers - Test methods Part 1-2: Power and gain parameters - Electrical spectrum analyzer method 2005 CENELEC 0 4426 EN 61967-2 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 2: Measurement of radiated 2005 CENELEC 0 emissions - TEM cell and wideband TEM cell method 4427 EN 50395 Electrical test methods for low voltage energy cables - Incorporates Amendment A1: 2011 2005 CENELEC 0 4428 EN 60384-17-1 Fixed capacitors for use in electronic equipment Part 16-1: Blank detail specification: Fixed metallized polypropylene film 2005 CENELEC 0 dielectric d.c. capacitors - Assessment levels E and EZ - Remains Current 4429 EN 82045-2 Document management Part 2: Metadata elements and information reference model 2005 CENELEC 0 4430 EN 61744 Calibration of fibre optic chromatic dispersion test sets 2005 CENELEC 0 4431 EN 61442 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) 2005 CENELEC 0 4432 EN 60118-7 Electroacoustics Hearing aids Part 7: Measurement of the performance characteristics of hearing aids for production, 2005 CENELEC 0 supply and delivery quality assurance purposes 4433 EN 61883-4 Consumer Audio/Video Equipment Digital Interface Part 4: MPEG2-TS Data Transmission 2005 CENELEC 0 4434 EN 50363-10-1 Insulating, sheathing and covering materials for low voltage energy cables Part 10-1: Miscellaneous sheathing compounds 2005 CENELEC 0 Cross-linked polyvinyl chloride (XLPVC) 4435 EN 61347-2-12 Lamp controlgear Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps 2005 CENELEC 0 (excluding fluorescent lamps) - Incorporates Amendment A1: 2010 4436 EN 60740-1 Laminations for transformers and inductors Part 1: Mechanical and electrical characteristics 2005 CENELEC 0 4437 EN 61019-2 Surface acoustic wave (SAW) resonators Part 2: Guide to the use 2005 CENELEC 0 4438 EN 50423-3 Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV Part 3: Set of National Normative Aspects - 2005 CENELEC 0 Incorporating Corrigenda April 2005, February 2009, June 2010 and October 2010; Remains Current 4439 EN 62194 Method of evaluating the thermal performance of enclosures 2005 CENELEC 0 4440 EN 61988-3-1 Plasma display panels Part 3-1: Mechanical interface 2005 CENELEC 0 4441 EN 62055-31 Electricity metering Payment systems Part 31: Particular requirements Static payment meters for active energy (classes 1 2005 CENELEC 0 and 2) 4442 EN 62319-1-1 Polymeric thermistors - Directly heated positive step function temperature coefficient Part 1-1: Blank detail specification - 2005 CENELEC 0 Current limiting application 4443 EN 61754-23 Fibre optic connector interfaces Part 23: Type LX.5 connector family 2005 CENELEC 0 sphere analysis method 2005 CENELEC 0 _أEN 61290-11-2 Optical amplifiers Test methods Part 11-2: Polarization mode dispersion parameter Poincar 4444 4445 EN 61211 Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V Impulse puncture 2005 CENELEC 0 testing in air 4446 EN 61883-3 Consumer audio/video equipment - Digital interface Part 3: HD-DVCR data transmission 2005 CENELEC 0 4447 EN 60335-2-76 Household and similar electrical appliances Safety Part 2-76: Particular requirements for electric fence energizers - 2005 CENELEC 0 Incorporates Amendment A2: 2015 4448 EN 61000-6-2 Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments 2005 CENELEC 0 4449 EN 60384-16-1 Fixed capacitors for use in electronic equipment Part 16-1: Blank detail specification: Fixed metallized polypropylene film 2005 CENELEC 0 dielectric d.c. capacitors - Assessment levels E and EZ 4450 CLC/TS 50459- Railway applications Communication, signalling and processing systems European Rail Traffic Management System 2005 CENELEC 0 6 Driver-Machine Interface Part 6: Audible information 4451 EN 60519-8 Safety in electroheat installations Part 8: Particular requirements for electroslag remelting furnaces 2005 CENELEC 0 4452 EN 62274 Medical electrical equipment Safety of radiotherapy record and verify systems 2005 CENELEC 0 4453 CLC/TS 50431 Optical fibre cables Drinking water pipe cables Family specification for cables to be installed in drinking water pipes 2005 CENELEC 0 4454 EN 61215 Crystalline Silicon Terrestrial Photovoltaic (PV) Modules - Design Qualification and Type Approval - Remains Current 2005 CENELEC 0 4455 EN 60609-1 Hydraulic turbines, storage pumps and pump-turbines Cavitation pitting evaluation Part 1: Evaluation in reaction turbines, 2005 CENELEC 0 storage pumps and pump-turbines 4456 EN 62323 Dimensions of half pot-cores made of ferrite for inductive proximity switches 2005 CENELEC 0 4457 EN 61360-4 Standard data element types with associated classification scheme for electric components Part 4: IEC reference collection 2005 CENELEC 0 of standard data element types and component classes - Incorporating Corrigendum December 2005 4458 EN 61883-2 Consumer audio/video equipment - Digital interface Part 2: SD-DVCR data transmission 2005 CENELEC 0 4459 EN 60255-27 Measuring relays and protection equipment Part 27: Product safety requirements 2005 CENELEC 0 4460 EN 60534-8-1 Industrial-process control valves Part 8-1: Noise considerations - Laboratory measurement of noise generated by 2005 CENELEC 0 aerodynamic flow through control valves 4461 CLC/TS 50430 Optical fibre cables Gas pipe cables Family specification for cables to be installed in high pressure gas pipes 2005 CENELEC 0 4462 EN 60708 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath - Incorporating corrigendum 2005 CENELEC 0 August 2016 4463 EN 60512-23-7 Connectors for electronic equipment Tests and measurements Part 23-7: Screening and filtering tests Test 23g: Effective 2005 CENELEC 0 transfer impedance of connectors 4464 EN 61788-9 Superconductivity Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain 2005 CENELEC 0 oxide superconductors 4465 EN 60384-9-1 Fixed capacitors for use in electronic equipment Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, 2005 CENELEC 0 Class 2 Assessment level EZ 4466 EN 61094-6 Measurement microphones Part 6: Electrostatic actuators for determination of frequency response 2005 CENELEC 0 4467 EN 62226-1 Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current 2005 CENELEC 0 density and internal electric field induced in the human body Part 1: General 4468 EN 61034-2 Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements - 2005 CENELEC 0 Incorporates Amendment A1: 2013 4469 EN 62044-2 Cores made of soft magnetic materials - Measuring methods Part 2: Magnetic properties at low excitation level 2005 CENELEC 0 4470 EN 60534-1 Industrial-process control valves Part 1: Control valve terminology and general considerations 2005 CENELEC 0 4471 EN 60384-8-1 Fixed capacitors for use in electronic equipment Part 8-1: Blank detail specification: Fixed capacitors of ceramic dielectric, 2005 CENELEC 0 Class 1 Assessment level EZ 4472 EN 62310-1 Static transfer systems (STS) Part 1: General and safety requirements 2005 CENELEC 0 4473 EN 62328-1 Multimedia home server systems Interchangeable volume/file structure adaptation for broadcasting receivers Part 1: 2005 CENELEC 0 General description and architecture 4474 EN 50216-8 Power transformer and reactor fittings Part 8: Butterfly valves for insulating liquid circuits - Incorporates Amendment A1: 2005 CENELEC 0 2006 4475 EN 61937-7 Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 7: Non-linear PCM 2005 CENELEC 0 bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats - Incorporates Amendment A1: 2016 4476 EN 62297-2 Triggering messages for broadcast applications Part 2: Transport methods 2005 CENELEC 0 4477 EN 50288-7 Multi-element metallic cables used in analogue and digital communication and control Part 7: Sectional specification for 2005 CENELEC 0 instrumentation and control cables 4478 EN 61162-402 Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 402: Multiple talkers and 2005 CENELEC 0 multiple listeners Ship systems interconnection Documentation and test requirements 4479 EN 61338-1 Waveguide type dielectric resonators Part 1: Generic specification 2005 CENELEC 0 4480 EN 60384-23-1 Fixed capacitors for use in electronic equipment Part 23-1: Blank detail specification Fixed surface mount metallized 2005 CENELEC 0 polyethylene naphthalate film dielectric DC capacitors Assessment level EZ 4481 EN 60645-5 Electroacoustics Audiometric equipment Part 5: Instruments for the measurement of aural acoustic impedance/admittance 2005 CENELEC 0 4482 EN 50363-9-1 Insulating, sheathing and covering materials for low voltage energy cables Part 9-1: Miscellaneous insulating compounds 2005 CENELEC 0 Cross-linked polyvinyl chloride (XLPVC) 4483 EN 50423-2 Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV Part 2: Index of National Normative Aspects 2005 CENELEC 0 4484 EN 60127-4 Miniature fuses Part 4: Universal modular fuse-links (UMF) Through-hole and surface mount types - Incorporates 2005 CENELEC 0 Amendment A2: 2013 4485 EN 60873-2 Electrical and pneumatic analogue chart recorders for use in industrial process control systems Part 2: Guidance for 2004 CENELEC 0 inspection and routine testing 4486 EN 50117-2-3 Coaxial cables Part 2-3: Sectional specification for cables used in cabled distribution networks Distribution and trunk 2004 CENELEC 0 cables for systems operating at 5 MHz - 1 000 MHz - Incorporates Amendment A2: 2013 4487 EN 61360-5 Standard data element types with associated classification scheme for electric components Part 5: Extensions to the 2004 CENELEC 0 EXPRESS dictionary schema 4488 EN 60684-3- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 165: Extruded polyolefin, flame 2004 CENELEC 0 165 retarded, limited fire hazard sleeving 4489 EN 61223-3-5 Evaluation and routine testing in medical imaging departments Part 3-5: Acceptance tests Imaging performance of 2004 CENELEC 0 computed tomography X-ray equipment 4490 EN 50163 Railway applications - Supply voltages of traction systems - Incorporates Amendment A1: 2007; Incorporating corrigenda 2004 CENELEC 0 May 2010 and January 2013 4491 EN 50065-4-6 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-6: Low voltage 2004 CENELEC 0 decoupling filters Phase coupler 4492 EN 50406-2 End user multi-pair cables used in high bit rate telecommunication networks Part 2: Duct and buried cables 2004 CENELEC 0 4493 EN 60115-9-1 Fixed resistors for use in electronic equipment Part 9-1: Blank detail specification - Fixed surface mount resistor networks 2004 CENELEC 0 with individually measurable resistors - Assessment level EZ 4494 EN 60998-2-3 Connecting Devices for Low-Voltage Circuits for Household and Similar Purposes - Part 2-3: Particular Requirements for 2004 CENELEC 0 Connecting Devices as Separate Entities with Insulation Piercing Clamping Units 4495 EN 50134-5 Alarm systems Social alarm systems Part 5: Interconnections and communications 2004 CENELEC 0 4496 EN 60076-11 Power transformers Part 11: Dry-type transformers 2004 CENELEC 0 4497 EN 61386-22 Conduit systems for cable management Part 22: Particular requirements Pliable conduit systems - Incorporates Amendment 2004 CENELEC 0 A11: 2010 4498 EN 61076-2- Connectors for electronic equipment Part 2-103: Circular connectors Detail specification for a range of multipole 2004 CENELEC 0 (_آXLR_آ connectors (type 103 4499 EN 50308 Wind turbines Protective measures Requirements for design, operation and maintenance - Incorporating Corrigendum 2004 CENELEC 0 February 2005 4500 EN 50377-9-2 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 2004 CENELEC 0 9-2: Type MT-RJ terminated on IEC 60793-2 category B1.1 singlemode fibre 4501 EN 62270 Hydroelectric power plant automation - Guide for computer-based control 2004 CENELEC 0 4502 EN 62052-21 Electricity metering equipment (a.c.) - General requirements, tests and test conditions Part 21: Tariff and load control 2004 CENELEC 0 equipment - Incorporates Amendment A1: 2017 4503 EN 60749-33 Semiconductor devices Mechanical and climatic test methods Part 33: Accelerated moisture resistance Unbiased autoclave 2004 CENELEC 0 4504 EN 50090-4-2 Home and Building Electronic Systems (HBES) Part 4-2: Media independent layers - Transport layer, network layer and 2004 CENELEC 0 general parts of data link layer for HBES Class 1 4505 EN 60939-2-1 Complete filter units for radio interference suppression Part 2-1: Blank detail specification Passive filter units for 2004 CENELEC 0 electromagnetic interference suppression Filters for which safety tests are required (assessment level D/DZ) 4506 EN 60806 Determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis 2004 CENELEC 0 4507 EN 60372 Locking devices for ball and socket couplings of string insulator units Dimensions and tests 2004 CENELEC 0 4508 EN 50290-1-2 Communication cables Part 1-2: Definitions 2004 CENELEC 0 4509 EN 50377-7-1 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 2004 CENELEC 0 7-1: Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre 4510 EN 62054-21 Electricity metering (AC) - Tariff and load control - Part 21: Particular requirements for time switches - Incorporates 2004 CENELEC 0 Amendment A1: 2017 4511 EN 50090-5-2 Home and Building Electronic Systems (HBES) Part 5-2: Media and media dependent layers - Network based on HBES 2004 CENELEC 0 Class 1, Twisted Pair 4512 EN 60846 Radiation protection instrumentation Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X 2004 CENELEC 0 and gamma radiation 4513 EN 62330-2 Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 Part 2: 2004 CENELEC 0 Compression format 4514 EN 60893-1 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 1: 2004 CENELEC 0 Definitions, designations and general requirements 4515 EN 50090-4-1 Home and Building Electronic Systems (HBES) Part 4-1: Media independent layers Application layer for HBES Class 1 2004 CENELEC 0 4516 EN 61164 Reliability growth - Statistical test and estimation methods 2004 CENELEC 0 4517 EN 60332-1-2 Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single 2004 CENELEC 0 insulated wire or cable - Procedure for 1 kW pre-mixed flame - Incorporates Amendment A11: 2016 4518 EN 60761-2 Equipment for continuous monitoring radioactivity in gaseous effluents Part 2: Specific requirements for aerosols monitors 2004 CENELEC 0 including transuranic aerosols 4519 EN 60447 Basic and safety principles for man-machine interface, marking and identification Actuating principles 2004 CENELEC 0 4520 EN 62330-1 Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 Part 1: VTR 2004 CENELEC 0 specifications 4521 EN 50289-1-13 Communication cables Specifications for test methods Part 1-13: Electrical test methods Coupling attenuation or screening 2004 CENELEC 0 attenuation of patch cords / coaxial cable assemblies / pre-connectorised cables 4522 EN 50090-3-2 Home and Building Electronic Systems (HBES) Part 3-2: Aspects of application - User process for HBES Class 1 2004 CENELEC 0 4523 EN 50090-7-1 Home and Building Electronic Systems (HBES) Part 7-1: System management - Management procedures 2004 CENELEC 0 4524 EN 60317-22 Specifications for particular types of winding wires Part 22 : Polyester or polyesterimide enamelled round copper wire 2004 CENELEC 0 overcoated with polyamide, class 180 - Incorporates Amendment A1: 2010 4525 EN 61000-4-11 Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions 2004 CENELEC 0 and voltage variations immunity tests 4526 EN 62148-12 Fibre optic active components and devices - Package and interface standards Part 12: Laser transmitters with coaxial RF 2004 CENELEC 0 connector 4527 EN 60371-2 Specification for insulating materials based on mica - Part 2: Methods of test 2004 CENELEC 0 4528 EN 61747-2-2 Liquid crystal display devices Part 2-2: Matrix colour LCD modules - Blank detail specification 2004 CENELEC 0 4529 EN 62356-2 Video recording 12,65 mm type D-11 format Part 2: Picture compression and data stream 2004 CENELEC 0 4530 EN 60480 Guidelines for the checking and treatment of sulfur hexafluoride (SF6 ) taken from electrical equipment and specification 2004 CENELEC 0 for its re-use 4531 EN 62005-7 Reliability of fibre optic interconnecting devices and passive optical components Part 7: Life stress modeling 2004 CENELEC 0 4532 EN 50090-9-1 Home and Building Electronic Systems (HBES) Part 9-1: Installation requirements - Generic cabling for HBES Class 1 2004 CENELEC 0 Twisted Pair 4533 CLC/TR 50373 Wind turbines Electromagnetic compatibility 2004 CENELEC 0 4534 EN 50377-7-3 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 2004 CENELEC 0 7-3: Type LC-APC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre 4535 EN 61753-053- Fibre optic interconnecting devices and passive components performance standard Part 053-3: Continuously variable 2004 CENELEC 0 3 attenuators for category U - Uncontrolled environment 4536 EN 60761-1 Equipment for continuous monitoring radioactivity in gaseous effluents Part 1: General requirements 2004 CENELEC 0 4537 EN 62252 Maritime navigation and radiocommunication equipment and systems Radar for craft not in compliance with IMO SOLAS 2004 CENELEC 0 Chapter V Performance requirements, methods of test and required test results 4538 EN 60297-3- Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 2004 CENELEC 0 103 3-103: Keying and alignment pin 4539 EN 62356-1 Video recording 12,65 mm TYPE D-11 format Part 1: Tape recording 2004 CENELEC 0 4540 EN 61337-2 Filters using waveguide type dielectric resonators Part 2: Guidance for use 2004 CENELEC 0 4541 EN 60534-5 Industrial-process control valves Part 5: Marking 2004 CENELEC 0 4542 EN 50350 Charging control systems for household electric room heating of the storage type Methods for measuring performance 2004 CENELEC 0 4543 EN 50289-3-10 Communication cables Specifications for tests methods Part 3-10: Mechanical test methods Torsion and twisting 2004 CENELEC 0 4544 EN 60335-2-29 Household and similar electrical appliances Safety Part 2-29: Particular requirements for battery chargers - Incorporates 2004 CENELEC 0 Amendment A2: 2010 4545 EN 60749-23 Semiconductor devices Mechanical and climatic test methods Part 23: High temperature operating life - Incorporates 2004 CENELEC 0 Amendment A1: 2011 4546 EN 61386-23 Conduit systems for cable management Part 23: Particular requirements Flexible conduit systems - Incorporating 2004 CENELEC 0 Corrigendum April 2004; Incorporates Amendment A11: 2010 4547 EN 60893-2 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 2: Methods 2004 CENELEC 0 of test 4548 EN 60332-2-2 Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a single 2004 CENELEC 0 small insulated wire or cable - Procedure for diffusion flame 4549 EN 60893-3-6 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: 2004 CENELEC 0 Specifications for individual materials Requirements for rigid laminated sheets based on silicone resins - Incorporates Amendment A1: 20 4550 EN 62153-1-1 Metallic communication cables test methods Part 1-1: Electrical Measurement of the pulse/step return loss in the frequency 2004 CENELEC 0 domain using the Inverse Discrete Fourier Transformation (IDFT) 4551 EN 175101-809 Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with 2004 CENELEC 0 CECC 75 101-801, with assessed quality 4552 EN 60115-9 Fixed resistors for use in electronic equipment Part 9: Sectional specification - Fixed surface mount resistor networks with 2004 CENELEC 0 individually measurable resistors 4553 EN 60761-5 Equipment for continuous monitoring radioactivity in gaseous effluents Part 5: Specific requirements for tritium monitors 2004 CENELEC 0 4554 EN 50172 Emergency escape lighting systems 2004 CENELEC 0 4555 EN 60761-3 Equipment for continuous monitoring radioactivity in gaseous effluents Part 3: Specific requirements for radioactive noble 2004 CENELEC 0 gas monitors 4556 EN 61047 DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements 2004 CENELEC 0 4557 EN 60747-16-4 Semiconductor devices Part 16-4: Microwave integrated circuits - Switches - Incorporates Amendment A2: 2017 2004 CENELEC 0 4558 EN 60873-1 Electrical and pneumatic analogue chart recorders for use in industrial-process control systems Part 1: Methods for 2004 CENELEC 0 performance evaluation 4559 EN 60749-24 Semiconductor devices Mechanical and climatic test methods Part 24: Accelerated moisture resistance Unbiased HAST 2004 CENELEC 0 4560 EN 50289-1-14 Communication cables Specifications for test methods Part 1-14: Electrical test methods Coupling attenuation or screening 2004 CENELEC 0 attenuation of connecting hardware 4561 EN 61386-21 Conduit systems for cable management Part 21: Particular requirements Rigid conduit systems - Incorporating 2004 CENELEC 0 Corrigendum April 2004; Incorporates Amendment A11: 2010 4562 EN 50289-4-12 Communication cables Specifications for test methods Part 4-12: Environmental test methods Vertical flame spread test on 2004 CENELEC 0 bunched small communication cables 4563 EN 60399 Barrel thread for lampholders with shade holder ring - Incorporates Amendment A1: 2008 2004 CENELEC 0 4564 EN 60526 High-voltage cable plug and socket connections for medical X-ray equipment 2004 CENELEC 0 4565 EN 60893-3-4 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-4: 2004 CENELEC 0 Specifications for individual materials Requirements for rigid laminated sheets based on phenolic resins - Incorporates Amendment A1: 4566 EN 60684-3- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 228: Heat-shrinkable, semi-rigid 2004 CENELEC 0 228 polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 4567 EN 61338-2 Waveguide type dielectric resonators Part 2: Guidelines for oscillator and filter applications 2004 CENELEC 0 4568 EN 60669-2-1 Switches for household and similar fixed electrical installations Part 2-1: Particular requirements Electronic switches - 2004 CENELEC 0 Incorporating corrigendum December 2007; Incorporates Amendment A12: 2010 4569 EN 50117-2-2 Coaxial cables Part 2-2: Sectional specification for cables used in cabled distribution networks Outdoor drop cables for 2004 CENELEC 0 systems operating at 5 MHz - 1000 MHz - Incorporates Amendment A2: 2013 4570 EN 60825-2 Safety of laser products Part 2: Safety of optical fibre communication systems (OFCS) - Incorporates Amendment A2: 2004 CENELEC 0 2010 4571 EN 60332-2-1 Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single 2004 CENELEC 0 small insulated wire or cable Apparatus 4572 EN 55016-2-4 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-4: Methods of measurement of 2004 CENELEC 0 disturbances and immunity Immunity measurements 4573 EN 61086-2 Coatings for loaded printed wire boards (conformal coatings) Part 2: Methods of test - Incorporating Corrigendum January 2004 CENELEC 0 2005 4574 EN 60335-2-75 Household and similar electrical appliances Safety Part 2-75: Particular requirements for commercial dispensing appliances 2004 CENELEC 0 and vending machines - Incorporates Amendments A11: 2006, A2: 2008 and A12: 2010 4575 EN 60034-14 Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher 2004 CENELEC 0 Measurement, evaluation and limits of vibration severity - Incorporates Amendment A1: 2007 4576 EN 60893-3-5 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-5: 2004 CENELEC 0 Specifications for individual materials Requirements for rigid laminated sheets based on polyester resins - Incorporates Amendment A1: 2 4577 EN 50377-7-2 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 2004 CENELEC 0 7-2: LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre 4578 EN 61221 Petroleum products and lubricants Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications 2004 CENELEC 0 4579 EN 62153-4-2 Metallic communication cables test methods Part 4-2: Electromagnetic compatibility (EMC) Screening and coupling 2004 CENELEC 0 attenuation Injection clamp method 4580 EN 60896-21 Stationary lead-acid batteries Part 21: Valve regulated types Methods of test 2004 CENELEC 0 4581 EN 60939-2-2 Complete filter units for radio interference suppression Part 2-2: Blank detail specification Passive filter units for 2004 CENELEC 0 electromagnetic interference suppression Filters for which safety tests are required (safety tests only) 4582 EN 61340-4-1 Electrostatics Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed 2004 CENELEC 0 floors - Incorporates Amendment A1: 2015 4583 EN 60444-7 Measurement of quartz crystal unit parameters Part 7: Measurement of activity and frequency dips of quartz crystal units 2004 CENELEC 0 4584 EN 50406-1 End user multi-pair cables used in high bit rate telecommunication networks Part 1: Aerial cables 2004 CENELEC 0 4585 EN 61920 Infrared free air applications 2004 CENELEC 0 4586 EN 60774-5 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS Part 5: D-VHS 2004 CENELEC 0 4587 EN 60384-22-1 Fixed capacitors for use in electronic equipment Part 22-1: Blank detail specification: Fixed surface mount multilayer 2004 CENELEC 0 capacitors of ceramic dielectric, Class 2 Assessment level EZ 4588 EN 50289-1-15 Communication cables Specifications for test methods Part 1-15: Electromagnetic performance Coupling attenuation of 2004 CENELEC 0 links and channels (Laboratory conditions) 4589 EN 61076-7- Connectors for electronic equipment Part 7-001: Cable outlet accessories Blank detail specification 2004 CENELEC 0 001 4590 EN 60539-2 Directly heated negative temperature coefficient thermistors Part 2: Sectional specification - Surface mount negative 2004 CENELEC 0 temperature coefficient thermistors - Incorporates Amendment A1: 2010 4591 EN 61108-4 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) Part 4: 2004 CENELEC 0 Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment Performance requirements, methods of testing and required test resul 4592 EN 50117-2-4 Coaxial cables Part 2-4: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for 2004 CENELEC 0 systems operating at 5 MHz - 3 000 MHz - Incorporates Amendment A2: 2013 4593 EN 62356-3 Video recording 12,65 mm type D-11 format Part 3: Data mapping over SDTI 2004 CENELEC 0 4594 EN 45510-2-8 Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables 2004 CENELEC 0 4595 EN 60247 Insulating liquids Measurement of relative permittivity, dielectric dissipation factor (tan $) and d.c. resistivity 2004 CENELEC 0 4596 EN 61603-8-1 Transmission of audio and/or video and related signals using infrared radiation Part 8-1: Digital audio and related signals 2004 CENELEC 0 4597 EN 60761-4 Equipment for continuous monitoring radioactivity in gaseous effluents Part 4: Specific requirements for iodine monitors 2004 CENELEC 0 4598 EN 60998-2-2 Connecting devices for low-voltage circuits for household and similar purposes Part 2-2: Particular requirements for 2004 CENELEC 0 connecting devices as separate entities with screwless-type clamping units 4599 EN 88528-11 Reciprocating internal combustion engine driven alternating current generating sets Part 11: Rotary uninterruptible power 2004 CENELEC 0 systems - Performance requirements and test methods 4600 CLC/TR 50426 Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation Guide 2004 CENELEC 0 4601 EN 62028 General methods of measurement for digital television receivers 2004 CENELEC 0 4602 EN 62309 Dependability of products containing reused parts Requirements for functionality and tests 2004 CENELEC 0 4603 EN 61337-1 Filters using waveguide type dielectric resonators Part 1: Generic specification 2004 CENELEC 0 4604 EN 61753-061- Fibre optic interconnecting devices and passive components performance standard Part 061-3: Single mode fibre optic 2004 CENELEC 0 3 pigtailed style isolators for category U Uncontrolled environment 4605 EN 61959 Secondary cells and batteries containing alkaline or other non-acid electrolytes Mechanical tests for sealed portable 2004 CENELEC 0 secondary cells and batteries - Incorporating Corrigendum June 2004 4606 EN 61753-091- Fibre optic interconnecting devices and passive components performance standard Part 091-3: Single mode fibre optic 2004 CENELEC 0 3 pigtailed style circulators for category U Uncontrolled environment 4607 EN 50390 Space product assurance The manual soldering of high-reliability electrical connections 2004 CENELEC 0 4608 EN 60317-18 Specifications for particular types of winding wires Part 18 : Polyvinyl acetal enamelled rectangular copper wire, class 120 2004 CENELEC 0 - Incorporates Amendment A1: 2010 4609 EN 60325 Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and 2004 CENELEC 0 monitors 4610 EN 60332-1-1 Tests on electric and optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a single 2004 CENELEC 0 insulated wire or cable - Apparatus - Incorporates Amendment A1: 2015 4611 EN 61196-4 Coaxial communication cables Part 4: Sectional specification for radiating cables 2004 CENELEC 0 4612 EN 60317-15 Specifications for particular types of winding wires Part 15: Polyesterimide enamelled round aluminium wire, class 180 - 2004 CENELEC 0 Incorporates Amendment A1: 2010 4613 EN 60747-16- Semiconductor devices Part 16-10: Technology Approval Schedule (TAS) for monolithic microwave integrated circuits 2004 CENELEC 0 10 4614 EN 60893-3-7 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-7: 2004 CENELEC 0 Specifications for individual materials Requirements for rigid laminated sheets based on polyimide resins - Incorporates Amendment A1: 2 4615 EN 62054-11 Electricity metering (a.c.) - Tariff and load control Part 11: Particular requirements for electronic ripple control receivers - 2004 CENELEC 0 Incorporates Amendment A1: 2017 4616 EN 61290-5-2 Optical amplifiers Test methods Part 5-2: Reflectance parameters Electrical spectrum analyser method 2004 CENELEC 0 4617 EN 60893-3-2 Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-2: 2004 CENELEC 0 Specifications for individual materials Requirements for rigid laminated sheets based on epoxy resins - Incorporates Amendment A1: 2011 Outdoor drop cables for 2004 CENELEC 0 _آ EN 50117-2-5 Coaxial cables Part 2-5: Sectional specification for cables used in cabled distribution networks 4618 systems operating at 5 MHz - 3 000 MHz - Incorporates Amendment A2: 2013 4619 CLC/TS 50349 Qualification of electrical installation contractors 2004 CENELEC 0 4620 EN 60896-22 Stationary lead-acid batteries Part 22: Valve regulated types Requirements 2004 CENELEC 0 4621 EN 62286 Service diagnostic interface for consumer electronics products and networks Implementation for IEEE 1394 2004 CENELEC 0 4622 EN 62259 Secondary cells and batteries containing alkaline or other non-acid electrolytes Nickel-cadmium prismatic secondary single 2004 CENELEC 0 cells with partial gas recombination 4623 EN 60641-2 Pressboard and presspaper for electrical purposes Part 2: Methods of tests 2004 CENELEC 0 4624 EN 61076-3- Connectors for electronic equipment Part 3-103: Rectangular connectors Detail specification for single row connectors with 2004 CENELEC 0 103 non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) 4625 EN 60652 Loading tests on overhead line structures 2004 CENELEC 0 4626 EN 61966-9 Multimedia systems and equipment Colour measurement and management Part 9: Digital cameras 2004 CENELEC 0 4627 EN 60893-3-3 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-3: 2004 CENELEC 0 Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins - Incorporates Amendment A1 4628 EN 62330-3 Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 Part 3: Data 2004 CENELEC 0 stream format 4629 EN 60300-3-14 Dependability management Part 3-14: Application guide - Maintenance and maintenance support 2004 CENELEC 0 4630 EN 60450 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating 2004 CENELEC 0 materials - Incorporates Amendment A1: 2007 4631 EN 60300-3-1 Dependability management Part 3-1: Application guide Analysis techniques for dependability Guide on methodology 2004 CENELEC 0 4632 EN 60297-3- Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 2004 CENELEC 0 101 3-101: Subracks and associated plug-in units 4633 EN 60998-1 Connecting devices for low-voltage circuits for household and similar purposes Part 1: General requirements 2004 CENELEC 0 4634 EN 62011-2 Insulating materials Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based 2004 CENELEC 0 on thermosetting resins for electrical purposes Part 2: Methods of test 4635 EN 62375 Video systems (625/50 progressive) Video and accompanied data using the vertical blanking interval - Analogue interface 2004 CENELEC 0 4636 EN 60998-2-1 Connecting Devices for Low Voltage Circuits for Household and Similar Purposes Part 2-1: Particular Requirements for 2004 CENELEC 0 Connecting Devices as Separate Entities with Screw-Type Clamping Units 4637 EN 60286-6 Packaging of components for automatic handling Part 6: Bulk case packaging for surface mounting components 2004 CENELEC 0 4638 EN 50394-1 Electrical apparatus for potentially explosive atmospheres Group I Intrinsically safe systems Part 1: Construction and 2004 CENELEC 0 testing 4639 EN 50162 Protection against corrosion by stray current from direct current systems 2004 CENELEC 0 4640 EN 61086-3-1 Coatings for loaded printed wire boards (conformal coatings) Part 3-1: Specifications for individual materials - Coatings for 2004 CENELEC 0 general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3) 4641 EN 60297-3- Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 2004 CENELEC 0 102 3-102: Injector/extractor handle 4642 EN 61747-4-1 Liquid crystal display devices Part 4-1: Matrix colour LCD modules Essential ratings and characteristics 2004 CENELEC 0 4643 EN 60921 Ballasts for tubular fluorescent lamps - Performance requirements - Incorporates Amendment A1: 2006 2004 CENELEC 0 4644 EN 60332-1-3 Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single 2004 CENELEC 0 insulated wire or cable - Procedure for determination of flaming droplets/particles - Incorporates Amendment A1: 2015 4645 EN 60384-21-1 Fixed capacitors for use in electronic equipment Part 21-1: Blank detail specification: Fixed surface mount multilayer 2004 CENELEC 0 capacitors of ceramic dielectric, Class 1 Assessment level EZ 4646 EN 60379 Methods for measuring the performance of electric storage water-heaters for household purposes 2004 CENELEC 0 4647 EN 60825-12 Safety of laser products Part 12: Safety of free space optical communication systems used for transmission of information 2004 CENELEC 0 4648 EN 60512-25-5 Connectors for electronic equipment Tests and measurements Part 25-5: Test 25e Return loss 2004 CENELEC 0 4649 EN 50407-1 Multi-pair cables used in high bit rate digital access telecommunication networks Part 1: Outdoor cables 2004 CENELEC 0 4650 CLC/TS 60034- Rotating electrical machines Part 20-1: Control motors - Stepping motors 2004 CENELEC 0 20-1 4651 EN 60034-11 Rotating electrical machines - Part 11: Thermal protection 2004 CENELEC 0 4652 EN 60512-25-6 Connectors for electronic equipment - Tests and measurements Part 25-6: Test 25f: Eye pattern and jitter 2004 CENELEC 0 4653 EN 61006 Electrical insulating materials Methods of test for the determination of the glass transition temperature 2004 CENELEC 0 4654 CLC/TR 50427 Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation Guide 2004 CENELEC 0 4655 EN 61549 Miscellaneous Lamps - Incorporates Amendment A3: 2012 2003 CENELEC 0 4656 EN 61883-7 Consumer audio/video equipment Digital interface Part 7: Transmission of ITU-R BO.1294 System B 2003 CENELEC 0 4657 EN 60512-11- Connectors for electronic equipment Tests and measurements Part 11-14: Climatic tests Test 11p: Flowing single gas 2003 CENELEC 0 14 corrosion test 4658 EN 60335-2-61 Household and similar electrical appliances - Safety Part 2-61: Particular requirements for thermal-storage room heaters - 2003 CENELEC 0 Incorporates Amendment A2: 2003 4659 EN 60077-5 Railway applications - Electrotechnical equipment for rolling stock Part 5: Electrotechnical components - Rules for HV 2003 CENELEC 0 fuses 4660 EN 60335-2-55 Household and similar electrical appliances Safety Part 2-55: Particular requirements for electrical appliances for use with 2003 CENELEC 0 aquariums and garden ponds - Incorporates Amendment A1: 2008 4661 EN 60335-2-12 Household and similar electrical appliances - Safety Part 2-12: Particular requirements for warming plates and similar 2003 CENELEC 0 appliances - Incorporates Amendment A1: 2008 4662 EN 62289 Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 2003 CENELEC 0 compression Format D-10 4663 EN 50238-1 Railway applications Compatibility between rolling stock and train detection systems Part 1: General - Incorporating 2003 CENELEC 0 corrigendum May 2010 4664 EN 50327 Railway applications Fixed installations Harmonisation of the rated values for converter groups and tests on converter 2003 CENELEC 0 groups - Incorporates Amendment A1: 2005 4665 EN 61188-5-2 Printed boards and printed board assemblies Design and use Part 5-2: Attachment (land/joint) considerations Discrete 2003 CENELEC 0 components 4666 EN 50065-2-1 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-1: Immunity 2003 CENELEC 0 requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in r 4667 EN 60357 Tungsten halogen lamps (non-vehicle) - Performance specifications - Incorporates Amendment A11: 2016 2003 CENELEC 0 4668 EN 60947-5-4 Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements - Method of assessing the 2003 CENELEC 0 performance of low-energy contacts - Special tests 4669 EN 61076-4- Connectors for electronic equipment Part 4-114: Printed board connectors Detail specification for two-part connector with 2003 CENELEC 0 114 integrated shielding function having a grid of 1 mm x 1,5 mm 4670 EN 61192-1 Workmanship requirements for soldered electronic assemblies Part 1: General 2003 CENELEC 0 4671 EN 60455-3-3 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 3: 2003 CENELEC 0 Unfilled polyurethane compounds 4672 EN 60999-2 Connecting devices Electrical copper conductors Safety requirements for screw-type and screwless-type clamping units 2003 CENELEC 0 Part 2: Particular requirements for clamping units for conductors above 35 mm up to 300 mm (included) 4673 EN 60749-31 Semiconductor devices - Mechanical and climatic test methods Part 31: Flammability of plastic-encapsulated devices 2003 CENELEC 0 (internally induced) 4674 EN 50288-4-1 Multi-element metallic cables used in analogue and digital communication and control Part 4-1: Sectional specification for 2003 CENELEC 0 screened cables characterised up to 600 MHz - Horizontal and building backbone cables 4675 EN 45502-2-1 Active implantable medical devices Part 2-1: Particular requirements for active implantable medical devices intended to 2003 CENELEC 0 treat bradyarrhythmia (cardiac pacemakers) 4676 EN 61000-2-12 Electromagnetic compatibility (EMC) Part 2-12: Environment Compatibility levels for low-frequency conducted 2003 CENELEC 0 disturbances and signalling in public medium-voltage power supply systems 4677 EN 60534-2-5 Industrial-process control valves Part 2-5: Flow capacity Sizing equations for fluid flow through multistage control valves 2003 CENELEC 0 with interstage recovery 4678 EN 60335-2-52 Household and similar electrical appliances Safety Part 2-52: Particular requirements for oral hygiene appliances - 2003 CENELEC 0 Incorporates Amendment A11: 2010; Incorporating corrigendum June 2012 4679 EN 60268-5 Sound system equipment Part 5: Loudspeakers - Incorporates Amendment A1: 2009 2003 CENELEC 0 4680 EN 60749-18 Semiconductor devices - Mechanical and climatic test methods Part 18: Ionizing radiation (total dose) 2003 CENELEC 0 4681 EN 60335-2-26 Household and similar electrical appliances - Safety Part 2-26: Particular requirements for clocks - Incorporates 2003 CENELEC 0 Amendment A1: 2008 4682 EN 61249-2-21 Materials for printed boards and other interconnecting structures Part 2-21: Reinforced base materials, clad and unclad 2003 CENELEC 0 Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad 4683 EN 50289-3-15 Communication cables Specifications for test methods Part 3-15: Mechanical test methods Underwater cable resistance to 2003 CENELEC 0 hydrostatic pressure 4684 EN 50289-4-14 Communication cables Specifications for test methods Part 4-14: Environmental test methods Lightning 2003 CENELEC 0 4685 EN 61921 Power capacitors Low-voltage power factor correction banks 2003 CENELEC 0 4686 EN 60749-36 Semiconductor devices Mechanical and climatic test methods Part 36: Acceleration, steady state 2003 CENELEC 0 4687 EN 60335-2-56 Household and similar electrical appliances - Safety Part 2-56: Particular requirements for projectors and similar appliances 2003 CENELEC 0 - Incorporates Amendment A2: 2014 4688 EN 61305-5 Household high-fidelity audio equipment and systems Methods of measuring and specifying the performance Part 5: 2003 CENELEC 0 Loudspeakers 4689 EN 60749-25 Semiconductor devices Mechanical and climatic test methods Part 25: Temperature cycling 2003 CENELEC 0 4690 EN 62011-3-1 Insulating materials - Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based 2003 CENELEC 0 on thermosetting resins for electrical purposes Part 3-1: Specifications for individual materials - Tubes and rods of rectangular and 4691 EN 61290-10-3 Optical amplifiers Test methods Part 10-3: Multichannel parameters Probe methods 2003 CENELEC 0 4692 EN 60454-3-19 Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 19: Tapes 2003 CENELEC 0 made from various backing materials with pressure-sensitive adhesive on both sides 4693 EN 61937-4 Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 4: Non-linear PCM 2003 CENELEC 0 bitstreams according to the MPEG audio format 4694 EN 60695-5-1 Fire hazard testing Part 5-1: Corrosion damage effects of fire effluent - General guidance 2003 CENELEC 0 4695 EN 60335-2-40 Household and similar electrical appliances - Safety Part 2-40: Particular requirements for electrical heat pumps, air- 2003 CENELEC 0 conditioners and dehumidifiers - Incorporating Corrigenda April 2006, August 2010 and August 2013; Incorporates Amendment A13: 2012 4696 EN 62148-6 Fibre optic active components and devices Package and interface standards Part 6: ATM-PON transceivers 2003 CENELEC 0 4697 EN 60966-4-1 Radio frequency and coaxial cable assemblies Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies 2003 CENELEC 0 4698 EN 50123-7-3 Railway applications Fixed installations D.C. switchgear Part 7-3: Measurement, control and protection devices for specific 2003 CENELEC 0 use in d.c. traction systems Isolating voltage transducers and other voltage measuring devices 4699 EN 50125-3 Railway applications - Environmental conditions for equipment Part 3: Equipment for signalling and telecommunications - 2003 CENELEC 0 Incorporating corrigendum May 2010 4700 EN 50238 Railway applications Compatibility between rolling stock and train detection systems - Incorporating Corrigendum May 2003 CENELEC 0 2010 4701 EN 61192-2 Workmanship requirements for soldered electronic assemblies Part 2: Surface-mount assemblies 2003 CENELEC 0 4702 EN 60335-2-80 Household and similar electrical appliances - Safety Part 2-80: Particular requirements for fans - Incorporates Amendment 2003 CENELEC 0 A2: 2009 4703 EN 60335-2-38 Household and similar electrical appliances Safety Part 2-38: Particular requirements for commercial electric griddles and 2003 CENELEC 0 griddle grills - Incorporating corrigendum August 2007; Incorporates Amendment A1: 2008 4704 EN 60862-3 Surface acoustic wave (SAW) filters of assessed quality Part 3: Standard outlines 2003 CENELEC 0 4705 EN 60870-5- Telecontrol equipment and systems Part 5-101: Transmission protocols Companion standard for basic telecontrol tasks - 2003 CENELEC 0 101 Incorporates Amendment A1: 2016 4706 EN 60335-2-74 Household and similar electrical appliances - Safety Part 2-74: Particular requirements for portable immersion heaters - 2003 CENELEC 0 Incorporates Amendment A2: 2009 4707 EN 50377-5-1 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 2003 CENELEC 0 5-1: Type EC terminated on IEC 60793-2 category B.1.1 singlemode fibre 4708 EN 60749-14 Semiconductor devices - Mechanical and climatic test methods Part 14: Robustness of terminations (lead integrity) 2003 CENELEC 0 4709 EN 60335-2-10 Household and similar electrical appliances Safety Part 2-10: Particular requirements for floor treatment machines and wet 2003 CENELEC 0 scrubbing machines - Incorporates Amendment A1: 2008 4710 EN 61823 Electrical installations for lighting and beaconing of aerodromes AGL series transformers 2003 CENELEC 0 4711 EN 60371-1 Specification for Insulating Materials Based on Mica Part 1: Definitions and General Requirements 2003 CENELEC 0 4712 EN 61300-3-30 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-30: 2003 CENELEC 0 Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors 4713 EN 60455-3-1 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 1: 2003 CENELEC 0 Unfilled epoxy resinous compounds 4714 EN 61965 Mechanical safety of cathode ray tubes 2003 CENELEC 0 4715 EN 60966-4 Radio frequency and coaxial cable assemblies Part 4: Sectional specification for semi-rigid coaxial cable assemblies 2003 CENELEC 0 4716 EN 61855 Household electrical hair care appliances - Methods of measuring the performance 2003 CENELEC 0 4717 EN 60335-2-71 Household and similar electrical appliances Safety Part 2-71: Particular requirements for electrical heating appliances for 2003 CENELEC 0 breeding and rearing animals - Incorporates Amendment A1: 2007 4718 EN 60455-3-4 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 4: Filled 2003 CENELEC 0 polyurethane compounds 4719 EN 61800-4 Adjustable speed electrical power drive systems Part 4: General requirements - Rating specifications for a.c. power drive 2003 CENELEC 0 systems above 1 000 V a.c. and not exceeding 35 kV 4720 EN 60191-6-10 Mechanical standardization of semiconductor devices Part 6-10: General rules for the preparation of outline drawings of 2003 CENELEC 0 surface mounted semiconductor device packages Dimensions of P-VSON 4721 EN 60335-2-85 Household and similar electrical appliances - Safety Part 2-85: Particular requirements for fabric steamers - Incorporates 2003 CENELEC 0 Amendment A1: 2008 4722 EN 62149-6 Fibre optic active components and devices Performance standards Part 6: 650-nm 250-Mbit/s plastic optical fibre 2003 CENELEC 0 transceivers 4723 EN 50288-3-1 Multi-element metallic cables used in analogue and digital communication and control Part 3-1: Sectional specification for 2003 CENELEC 0 unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables 4724 EN 60335-2-65 Household and similar electrical appliances Safety Part 2-65: Particular requirements for air-cleaning appliances - 2003 CENELEC 0 Incorporates Amendment A11: 2012 4725 EN 60903 Live working - Gloves of insulating material - Incorporating Corrigendum January 2005 2003 CENELEC 0 4726 EN 50065-4-3 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-3: Low voltage 2003 CENELEC 0 decoupling filter - Incoming filter 4727 EN 61249-2-10 Materials for printed boards and other interconnecting structures Part 2-10: Reinforced base materials clad and unclad 2003 CENELEC 0 Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical b 4728 EN 60512-2-5 Connectors for electronic equipment - Tests and measurements Part 2-5: Electrical continuity and contact resistance tests - 2003 CENELEC 0 Test 2e: Contact disturbance 4729 EN 62021-1 Insulating liquids Determination of acidity Part 1: Automatic potentiometric titration 2003 CENELEC 0 4730 EN 60335-2-73 Household and similar electrical appliances - Safety Part 2-73: Particular requirements for fixed immersion heaters - 2003 CENELEC 0 Incorporates Amendment A2: 2009 4731 EN 60622 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic 2003 CENELEC 0 rechargeable single cells 4732 EN 60947-6-2 Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment Control and protective switching devices 2003 CENELEC 0 (or equipment) (CPS) - Incorporates Amendment A1: 2007 4733 EN 60335-2-23 Household and similar electrical appliances - Safety Part 2-23: Particular requirements for appliances for skin or hair care - 2003 CENELEC 0 Incorporating Corrigendum June 2012; Incorporates Amendment A2: 2015 4734 EN 62053-21 Electricity metering equipment (a.c.) - Particular requirements Part 21: Static meters for active energy (classes 1 and 2) - 2003 CENELEC 0 Incorporates Amendment A1: 2017 4735 EN 61280-2-8 Fibre optic communication subsystem test procedures Digital systems Part 2-8: Determination of low BER using Q-factor 2003 CENELEC 0 measurements 4736 EN 60112 Method for the determination of the proof and the comparative tracking indices of solid insulating materials - Incorporating 2003 CENELEC 0 Corrigendum June 2003 4737 EN 60749-8 Semiconductor devices - Mechanical and climatic test methods Part 8: Sealing 2003 CENELEC 0 4738 EN 62018 Power consumption of information technology equipment Measurement methods 2003 CENELEC 0 4739 EN 50377-9-1 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 2003 CENELEC 0 9-1: Type MT-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre 4740 EN 60947-5-7 Low-voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements Requirements for 2003 CENELEC 0 proximity devices with analogue output 4741 EN 60544-4 Electrical insulating materials - Determination of the effects of ionizing radiation Part 4: Classification system for service in 2003 CENELEC 0 radiation environments 4742 EN 50123-7-1 Railway applications Fixed installations D.C. switchgear Part 7-1: Measurement, control and protection devices for specific 2003 CENELEC 0 use in d.c. traction systems Application guide 4743 EN 60684-3- Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 340 to 342: 2003 CENELEC 0 340 TO 342 Expandable Braided Polyethylene Terephthalate Textile Sleeving 4744 EN 50065-4-4 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage 2003 CENELEC 0 decoupling filter - Impedance filter Safety Part 2-32: Particular requirements for massage appliances - 2003 CENELEC 0 _آ EN 60335-2-32 Household and similar electrical appliances 4745 Incorporates Amendment A2: 2015 4746 EN 60895 Live working Conductive clothing for use at nominal voltage up to 800 kV a.c. and 600 kV d.c. 2003 CENELEC 0 4747 EN 60749-19 Semiconductor devices Mechanical and climatic test methods Part 19: Die shear strength - Incorporating Corrigendum June 2003 CENELEC 0 2003; Incorporates Amendment A1: 2010 4748 EN 50362 Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits 2003 CENELEC 0 4749 EN 50123-4 Railway applications - Fixed installations - D.C. switchgear Part 4: Outdoor d.c. disconnectors, switch-disconnectors and 2003 CENELEC 0 earthing switches - Incorporates Amendment A1: 2013 4750 EN 61076-4- Connectors for electronic equipment - Printed board connectors Part 4-113: Detail specification for two-part connectors 2003 CENELEC 0 113 having 5 rows with grid of 2,54 mm for printed boards and backplans in bus applications 4751 EN 60947-8 Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical 2003 CENELEC 0 machines - Incorporates Amendment A2: 2012 4752 EN 60335-2-43 Household and similar electrical appliances Safety Part 2-43: Particular requirements for clothes dryers and towel rails - 2003 CENELEC 0 Incorporates Amendment A2: 2008 4753 EN 60335-2-48 Household and similar electrical appliances Safety Part 2-48: Particular requirements for commercial electric grillers and 2003 CENELEC 0 toasters - Incorporating corrigendum September 2007; Incorporates Amendment A11: 2012 4754 EN 60704-2-9 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2-9: 2003 CENELEC 0 Particular requirements for electric hair care appliances 4755 EN 60191-6-4 Mechanical standardization of semiconductor devices Part 6-4: General rules for the preparation of outline drawings of 2003 CENELEC 0 surface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid array (BGA) 4756 EN 60335-2-51 Household and similar electrical appliances Safety Part 2-51: Particular requirements for stationary circulation pumps for 2003 CENELEC 0 heating and service water installations - Incorporates Amendment A2: 2012 4757 EN 60068-2-42 Environmental testing Part 2-42: Tests Test Kc: Sulphur dioxide test for contacts and connections 2003 CENELEC 0 4758 EN 60068-2-43 Environmental testing Part 2-43: Tests Test Kd: Hydrogen sulphide test for contacts and connections 2003 CENELEC 0 4759 EN 60684-3- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 406 to 408: Glass textile sleeving 2003 CENELEC 0 406 TO 408 with PVC coating 4760 EN 50328 Railway applications Fixed installations Electronic power convertors for substations 2003 CENELEC 0 4761 EN 60749-17 Semiconductor devices Mechanical and climatic test methods Part 17: Neutron irradiation 2003 CENELEC 0 4762 EN 60335-2-99 Household and similar electrical appliances Safety Part 2-99: Particular requirements for commercial electric hoods 2003 CENELEC 0 4763 EN 60512-10-4 Connectors for electronic equipment Tests and measurements Part 10-4: Impact tests (free components), static load tests 2003 CENELEC 0 (fixed components), endurance tests and overload tests Test 10d: Electrical overload (connectors) 4764 EN 61014 Programmes for reliability growth 2003 CENELEC 0 4765 EN 50329 Railway applications Fixed installations Traction transformers - Incorporating corrigendum December 2006; Incorporates 2003 CENELEC 0 Amendment A1: 2010 4766 EN 61188-5-6 Printed boards and printed board assemblies Design and use Part 5-6: Attachment (land/joint) considerations Chip carriers 2003 CENELEC 0 with J-leads on four sides 4767 EN 60774-4 Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS Part 4: S-VHS video cassette 2003 CENELEC 0 system ET-mode 4768 EN 50129 Railway applications Communication, signalling and processing systems Safety related electronic systems for signalling - 2003 CENELEC 0 Incorporating corrigendum May 2010 4769 EN 61108-1 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) Part 1: 2003 CENELEC 0 Global positioning system (GPS) -Receiver equipment - Performance standards, methods of testing and required test results 4770 EN 60898-1 Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations Part 1: Circuit- 2003 CENELEC 0 breakers for a.c. operation - Incorporating Corrigendum February 2004; Incorporates Amendment A13: 2012 4771 EN 60335-2-82 Household and similar electrical appliances Safety Part 2-82: Particular requirements for amusement machines and 2003 CENELEC 0 personal service machines - Incorporates Amendment A1: 2008 4772 EN 62193 Live working Telescopic sticks and telescopic measuring sticks 2003 CENELEC 0 4773 EN 61249-2-6 Materials for printed boards and other interconnecting structures Part 2-6: Reinforced base materials, clad and unclad 2003 CENELEC 0 Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad - In 4774 EN 62148-4 Fibre optic active components and devices Package and interface standards Part 4: PN 1x9 plastic optical fibre transceivers 2003 CENELEC 0 4775 EN 60896-11 Stationary lead-acid batteries Part 11: Vented types - General requirements and methods of tests 2003 CENELEC 0 4776 EN 60793-1-40 Optical fibres Part 1-40: Measurement methods and test procedures Attenuation 2003 CENELEC 0 4777 EN 62315-1 DTV profiles for uncompressed digital video interfaces Part 1: General 2003 CENELEC 0 4778 EN 50289-3-13 Communication cables Specifications for test methods Part 3-13: Mechanical test methods Aeolian vibration 2003 CENELEC 0 4779 EN 60335-2-16 Household and similar electrical appliances Safety Part 2-16: Particular requirements for food waste disposers - 2003 CENELEC 0 Incorporates Amendment A11: 2018 4780 EN 60749-32 Semiconductor devices - Mechanical and climatic test methods Part 32: Flammability of plastic-encapsulated devices 2003 CENELEC 0 (externally induced) - Incorporates Amendment A1: 2010 4781 EN 60068-3-8 Environmental testing Part 3-8: Supporting documentation and guidance Selecting amongst vibration tests 2003 CENELEC 0 4782 EN 60335-2-50 Household and similar electrical appliances Safety Part 2-50: Particular requirements for commercial electric bains-marie - 2003 CENELEC 0 Incorporating corrigendum September 2007; Incorporates Amendment A1: 2008 4783 EN 60335-2-49 Household and similar electrical appliances Safety Part 2-49: Particular requirements for commercial electric appliances for 2003 CENELEC 0 keeping food and crockery warm - Incorporating corrigendum September 2007; Incorporates Amendment A11: 2012 4784 EN 60335-2-60 Household and similar electrical appliances Safety Part 2-60: Particular requirements for whirlpool baths and whirlpool 2003 CENELEC 0 spas - Incorporates Amendment A12: 2010 4785 EN 61131-1 Programmable controllers Part 1: General information 2003 CENELEC 0 4786 EN 50065-4-5 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-5: Low voltage 2003 CENELEC 0 decoupling filter - Segmentation filter 4787 EN 62094-1 Indicator light units for household and similar fixed-electrical installations Part 1: General requirements - Incorporates 2003 CENELEC 0 Amendment A11: 2003 4788 EN 61192-4 Workmanship requirements for soldered electronic assemblies Part 4: Terminal assemblies 2003 CENELEC 0 4789 EN 60749-1 Semiconductor devices - Mechanical and climatic test methods Part 1: General 2003 CENELEC 0 4790 EN 60335-2-47 Household and similar electrical appliances Safety Part 2-47: Particular requirements for commercial electric boiling pans - 2003 CENELEC 0 Incorporating corrigendum September 2007; Incorporates Amendment A11: 2012 4791 EN 61966-2-2 Multimedia systems and equipment Colour measurement and management Part 2-2: Colour management Extended RGB 2003 CENELEC 0 colour space scRGB 4792 EN 61076-4- Connectors for electronic equipment Part 4-115: Printed board connectors Backplane connector for InfiniBand equipment 2003 CENELEC 0 115 4793 EN 62053-22 Electricity metering equipment (a.c.) - Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 2003 CENELEC 0 S) - Incorporates Amendment A1: 2017 4794 EN 61249-2-9 Materials for printed boards and other interconnecting structures Part 2-9: Reinforced base materials clad and unclad 2003 CENELEC 0 Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burnin 4795 EN 60512-2-2 Connectors for electronic equipment - Tests and measurements Part 2-2: Electrical continuity and contact resistance tests - 2003 CENELEC 0 Test 2b: Contact resistance - Specified test current method 4796 EN 62148-5 Fibre optic active components and devices Package and interface standards Part 5: SC 1x9 fibre optic modules 2003 CENELEC 0 4797 EN 60335-2-86 Household and similar electrical appliances Safety Part 2-86: Particular requirements for electric fishing machines - 2003 CENELEC 0 Incorporates Amendment A12: 2017 4798 EN 62155 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages 2003 CENELEC 0 greater than 1000 V 4799 EN 60455-3-2 Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 2: Sheet 2003 CENELEC 0 2: Quartz filled epoxy resinous compounds 4800 EN 50123-3 Railway applications Fixed installations D.C. switchgear Part 3: Indoor d.c. disconnectors, switch-disconnectors and 2003 CENELEC 0 earthing switches - Incorporates Amendment A1: 2013 4801 EN 60335-2-66 Household and similar electrical appliances - Safety Part 2-66: Particular requirements for water-bed heaters - Incorporates 2003 CENELEC 0 Amendment A2: 2012 4802 EN 60311 Electric irons for household or similar use - Methods for measuring performance - Incorporates Amendment A2: 2009 2003 CENELEC 0 4803 EN 50123-7-2 Railway applications Fixed installations D.C. switchgear Part 7-2: Measurement, control and protection devices for specific 2003 CENELEC 0 use in d.c. traction systems Isolating current transducers and other current measuring devices 4804 EN 60335-2-84 Household and similar electrical appliances Safety Part 2-84: Particular requirements for toilets - Incorporates Amendment 2003 CENELEC 0 A1: 2008 4805 EN 60749-16 Semiconductor devices Mechanical and climatic test methods Part 16: Particle impact noise detection (PIND) 2003 CENELEC 0 4806 EN 62272-1 Digital Radio Mondiale (DRM) Part 1: System specification 2003 CENELEC 0 4807 EN 61249-2-11 Materials for printed boards and other interconnecting structures Part 2-11: Reinforced base materials, clad and unclad 2003 CENELEC 0 Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burni 4808 EN 60684-3- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 229: Heat-shrinkable semi-flexible, 2003 CENELEC 0 229 polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 4809 EN 60885-2 Electrical test methods for electric cables Part 2: Partial discharge tests 2003 CENELEC 0 4810 EN 60068-2-81 Environmental testing Part 2-81: Tests Test Ei: Shock Shock response spectrum synthesis 2003 CENELEC 0 4811 EN 60966-3-2 Radio frequency and coaxial cable assemblies Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for 2003 CENELEC 0 GSM use (0,8 GHz - 1 GHz) 4812 EN 61290-3-1 Optical amplifiers Test methods Part 3-1: Noise figure parameters Optical spectrum analyzer method 2003 CENELEC 0 4813 EN 60335-2-42 Household and similar electrical appliances - Safety Part 2-42: Particular requirements for commercial electric forced 2003 CENELEC 0 convection ovens, steam cookers and steam-convection ovens - Incorporating corrigendum September 2007; Incorporates Amendment A11: 2012 4814 EN 60335-2-59 Household and similar electrical appliances Safety Part 2-59: Particular requirements for insect killers - Incorporates 2003 CENELEC 0 Amendment A2: 2009 4815 EN 50065-2-3 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-3: Immunity 2003 CENELEC 0 requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by elect 4816 EN 60746-2 Expression of performance of electrochemical analyzers Part 2: pH value - Incorporating Corrigendum No. 1 2003 CENELEC 0 4817 EN 62053-11 Electricity metering equipment (a.c.) Particular requirements Part 11: Electromechanical meters for active energy (classes 2003 CENELEC 0 0,5, 1 and 2) - Incorporates Amendment A1: 2017 4818 EN 50123-1 Railway applications Fixed installations D.C. switchgear Part 1: General 2003 CENELEC 0 4819 EN 60335-2-9 Household and similar electrical appliances Safety Part 2-9: Particular requirements for grills, toasters and similar portable 2003 CENELEC 0 cooking appliances - Incorporates Amendment A13: 2010; Incorporating Corrigenda March 2011, July 2011 and June 2012 4820 EN 60335-2-98 Household and similar electrical appliances - Safety Part 2-98: Particular requirements for humidifiers - Incorporates 2003 CENELEC 0 Amendment A2: 2008 4821 EN 50065-2-2 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-2: Immunity 2003 CENELEC 0 requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in i 4822 EN 61238-1 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) Part 1: Test 2003 CENELEC 0 methods and requirements 4823 EN 62052-11 Electricity metering equipment (AC) - General requirements, tests and test conditions Part 11: Metering equipment - 2003 CENELEC 0 Incorporates Amendment A1: 2017 4824 EN 61249-2-5 Materials for printed boards and other interconnecting structures Part 2-5: Reinforced base materials, clad and unclad 2003 CENELEC 0 Brominated epoxide cellulose paper reinforced core / woven E-glass reinforced surfaces laminated sheets of defined flammability (vertica 4825 EN 61603-7 Transmission systems for audio and/or video and related signals using infra-red radiation Part 7: Digital audio signals for 2003 CENELEC 0 conference and similar applications 4826 EN 61249-2-8 Materials for printed boards and other interconnecting structures Part 2-8: Reinforced base materials clad and unclad 2003 CENELEC 0 Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad 4827 EN 60966-2-2 Radio frequency and coaxial cable assemblies Part 2-2: Blank detail specification for flexible coaxial cable assemblies 2003 CENELEC 0 4828 EN 60335-2-78 Household and similar electrical appliances Safety Part 2-78: Particular requirements for outdoor barbecues - Incorporates 2003 CENELEC 0 Amendment A1: 2008 4829 EN 61967-5 Integrated circuits Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 5: Measurement of conducted 2003 CENELEC 0 emissions Workbench Faraday Cage method 4830 EN 50370-2 Electromagnetic compatibility (EMC) - Product family standard for machine tools Part 2: Immunity 2003 CENELEC 0 4831 EN 50123-2 Railway Applications Fixed Installations - D.C. Switchgear Part 2: D.C. Circuit Breakers 2003 CENELEC 0 4832 EN 187103 Family specification Optical fibre cables for indoor applications 2003 CENELEC 0 4833 EN 61192-3 Workmanship requirements for soldered electronic assemblies Part 3: Through-hole mount assemblies 2003 CENELEC 0 4834 EN 60598-2-3 Luminaires Part 2-3: Particular requirements - Luminaires for road and street lighting - Incorporating Corrigendum August 2003 CENELEC 0 2005; Incorporates Amendment A1: 2011 4835 EN 60335-2-21 Household and similar electrical appliances - Safety Part 2-21: Particular requirements for storage water heaters - 2003 CENELEC 0 Incorporating Corrigenda October 2007 and October 2010; Incorporates Amendment A2: 2008 4836 EN 60684-1 Flexible insulating sleeving Part 1: Definitions and general requirements 2003 CENELEC 0 4837 EN 60335-2-41 Household and similar electrical appliances - Safety Part 2-41: Particular requirements for pumps - Incorporates 2003 CENELEC 0 Amendment A2: 2010 4838 EN 61300-3-31 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-31: 2003 CENELEC 0 Examinations and Measurements - Coupled Power Ratio Measurement for Fibre Optic Sources 4839 EN 60950-21 Information technology equipment Safety Part 21: Remote power feeding - Incorporating Corrigendum August 2003 2003 CENELEC 0 4840 EN 60512-11-7 Connectors for electronic equipment - Tests and measurements Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas 2003 CENELEC 0 corrosion test 4841 EN 60749-22 Semiconductor devices - Mechanical and climatic test methods Part 22: Bond strength 2003 CENELEC 0 4842 EN 60077-4 Railway applications - Electric equipment for rolling stock Part 4: Electrotechnical components - Rules for AC circuit- 2003 CENELEC 0 breakers 4843 EN 60598-2-10 Luminaires Part 2-10: Particular requirements - Portable luminaires for children - Incorporating Corrigendum August 2005 2003 CENELEC 0 4844 EN 60335-2-28 Household and similar electrical appliances Safety Part 2-28: Particular requirements for sewing machines - Incorporates 2003 CENELEC 0 Amendment A1: 2008 4845 EN 60746-1 Expression of performance of electrochemical analyzers Part 1: General 2003 CENELEC 0 4846 EN 60335-2-81 Household and similar electrical appliances - Safety Part 2-81: Particular requirements for foot warmers and heating mats - 2003 CENELEC 0 Incorporates Amendment A2: 2012 4847 EN 60512-4-1 Connectors for electronic equipment Tests and measurements Part 4-1: Voltage stress tests Test 4a: Voltage proof 2003 CENELEC 0 4848 EN 62053-23 Electricity metering equipment (a.c.) - Particular requirements Part 23: Static meters for reactive energy (classes 2 and 3) - 2003 CENELEC 0 Incorporates Amendment A1: 2017 4849 EN 50123-6 Railway applications Fixed installations D.C. switchgear Part 6: D.C. switchgear assemblies - Incorporates Amendment 2003 CENELEC 0 A1: 2014 4850 EN 60335-2-39 Household and similar electrical appliances Safety Part 2-39: Particular requirements for commercial electric multi-purpose 2003 CENELEC 0 cooking pans - Incorporates Amendment A2: 2008; Incorporating corrigendum September 2007 4851 EN 60570 Electrical supply track systems for luminaires - Incorporates Amendment A1: 2018 2003 CENELEC 0 4852 EN 60044-8 Instrument transformers Part 8: Electronic current transformers - Remains Current 2002 CENELEC 0 4853 EN 61523-1 Delay and Power Calculation Standards Part 1: Integrated Circuit Delay and Power Calculation Systems 2002 CENELEC 0 4854 EN 61249-2-19 Materials for Printed Boards and Other Interconnecting Structures Part 2-19: Reinforced Base Materials, Clad and Unclad - 2002 CENELEC 0 Epoxide Cross-Plied Linear Fibreglass-Reinforced Laminated Sheets of Defined Flammability (Vertical Burning Test) Copper Clad 4855 EN 61286 Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and 2002 CENELEC 0 for information interchange 4856 EN 50307 Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables 2002 CENELEC 0 4857 EN 61162-400 Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces Part 400: Multiple Talkers and 2002 CENELEC 0 Multiple Listeners - Ship Systems Interconnection - Introduction and General Principles 4858 EN 50117-3-1 Coaxial Cables Part 3-1: Sectional Specifications for Cables Used in Telecom Applications - Miniaturized Cables Used in 2002 CENELEC 0 Digital Communication Systems 4859 EN 80416-3 Basic principles for graphical symbols for use on equipment Part 3: Guidelines for the application of graphical symbols - 2002 CENELEC 0 Incorporates Amendment A1: 2011 4860 EN 60335-2-36 Household and similar electrical appliances - Safety Part 2-36: Particular requirements for commercial electric cooking 2002 CENELEC 0 ranges, ovens, hobs and hob elements - Incorporating corrigendum August 2007; Incorporates Amendment A11: 2012 4861 EN 60335-2-37 Household and similar electrical appliances - Safety Part 2-37: Particular requirements for commercial electric deep fat 2002 CENELEC 0 fryers - Incorporating corrigendum August 2007; Incorporates Amendment A12: 2016 4862 EN 62014-1 Electronic design automation libraries Part 1: Input/Output buffer information specifications (IBIS version 3.2) 2002 CENELEC 0 4863 EN 50274 Low-Voltage Switchgear and Controlgear Assemblies - Protection Against Electric Shock - Protection Against 2002 CENELEC 0 Unintentional Direct Contact with Hazardous Live Parts 4864 EN 50289-3-17 Communication Cables - Specifications for Test Methods Part 3-17: Mechanical Test Methods - Adhesion of Dielectric and 2002 CENELEC 0 Sheath 4865 EN 60512-5-1 Connectors for Electronic Equipment - Tests and Measurements Part 5-1: Current-Carrying Capacity Tests - Tests 5a: 2002 CENELEC 0 Temperature Rise 4866 EN 50216-6 Power Transformer and Reactor Fittings Part 6: Cooling Equipment - Removable Radiators for Oil-Immersed Transformers 2002 CENELEC 0 4867 EN 50306-1 Railway applications Railway rolling stock cables having special fire performance Thin wall Part 1: General requirements 2002 CENELEC 0 4868 EN 62056-21 Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control Part 21: Direct Local Data Exchange 2002 CENELEC 0 4869 EN 50249 Electromagnetic locators for buried pipes and cables - Performance and safety 2002 CENELEC 0 4870 EN 60702-1 Mineral Insulated Cables and Their Terminations with a Rated Voltage Not Exceeding 750 V Part 1: Cables - Incorporates 2002 CENELEC 0 Amendment A1: 2015 4871 EN 61076-2- Connectors for Electronic Equipment Part 2-102: Circular Connectors with Assessed Quality - Detail Specification for 2002 CENELEC 0 102 Plugs and Jacks for External Low Voltage Power Supply 4872 EN 50107-1 Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not 2002 CENELEC 0 exceeding 10 kV Part 1: General requirements - Incorporates Amendment A1: 2004 4873 EN 50125-2 Railway applications - Environmental conditions for equipment Part 2: Fixed electrical installations - Incorporating 2002 CENELEC 0 corrigendum June 2010 4874 EN 61249-2-4 Materials for Printed Boards and Other Interconnecting Structures Part 2-4: Reinforced Base Materials, Clad and Unclad - 2002 CENELEC 0 Polyester Non-Woven/Woven Fibreglass Laminated Sheet of Defined Flammability (Vertical Burning Test), Copper-Clad 4875 EN 60749-2 Semiconductor Devices Mechanical and Climatic Test Methods Part 2: Low Air Pressure 2002 CENELEC 0 4876 EN 60077-3 Railway applications - Electric equipment for rolling stock Part 3: Electrotechnical components - Rules for d.c. circuit- 2002 CENELEC 0 breakers 4877 EN 60512-11- Connectors for Electronic Equipment - Tests and Measurements Part 11-13: Climatic Tests - Test 11n: Gas Tightness, 2002 CENELEC 0 13 Solderless Wrapped Connections 4878 EN 45510-4-4 Guide for the Procurement of Power Station Equipment - Part 4-4: Boiler Auxiliaries - Fuel Preparation Equipment 2002 CENELEC 0 4879 EN 60512-11-4 Connectors for Electronic Equipment - Tests and Measurements Part 11-4: Climatic Tests - Test 11d: Rapid Change of 2002 CENELEC 0 Temperature 4880 EN 50318 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph 2002 CENELEC 0 and overhead contact line 4881 EN 61334-4- Distribution Automation Using Distribution Line Carrier Systems Part 4-512: Data Communication Protocols - System 2002 CENELEC 0 512 Management Using Profile 61334-5-1 - Management Information Base (MIB) 4882 EN 60684-3- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 400 to 402: Glass textile sleeving 2002 CENELEC 0 400 TO 402 with silicone elastomer coating 4883 EN 60512-11-9 Connectors for Electronic Equipment - Tests and Measurements Part 11-9: Climatic Tests - Test 11i: Dry Heat 2002 CENELEC 0 4884 CECC 96 701 Blank Detail Specification: Dual-in-line switches 2002 CENELEC 0 4885 EN 60512-2-3 Connectors for Electronic Equipment - Tests and Measurements Part 2-3: Electrical Continuity and Contact Resistance 2002 CENELEC 0 Tests - Test 2c: Contact Resistance Variation 4886 EN 60512-2-1 Connectors for Electronic Equipment Tests and Measurements Part 2-1: Electrical Continuity and Contact Resistance Tests 2002 CENELEC 0 Test 2a: Contact Resistance Millivolt Level Method 4887 EN 61000-4-13 Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques - Harmonics and interharmonics 2002 CENELEC 0 including mains signalling at a.c. power port, low frequency immunity tests - Incorporates Amendment A2: 2016 4888 EN 50326 Conductors for overhead lines - Characteristics of greases 2002 CENELEC 0 4889 EN 60953-3 Rules for Steam Turbine Thermal Acceptance Tests - Part 3: Thermal Performance Verification Tests of Retrofitted Steam 2002 CENELEC 0 Turbines 4890 EN 60554-2 Cellulosic Papers for Electrical Purposes - Part 2: Methods of Test 2002 CENELEC 0 4891 EN 60335-2-88 Household and similar electrical appliances - Safety Part 2-88: Particular requirements for humidifiers intended for use 2002 CENELEC 0 with heating, ventilation, or air-conditioning systems 4892 EN 60793-1-46 Optical Fibres Part 1-46: Measurement Methods and Test Procedures - Monitoring of Changes in Optical Transmittance 2002 CENELEC 0 4893 EN 60122-1 Quartz crystal units of assessed quality Part 1: Generic specification - Incorporates Amendment A1: 2018 2002 CENELEC 0 4894 EN 60068-3-4 Environmental Testing - Part 3-4: Supporting Documentation and Guidance - Damp Heat Tests 2002 CENELEC 0 4895 EN 50243 Outdoor Bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for Liquid Filled Transformers 2002 CENELEC 0 4896 EN 61000-4-7 Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques - General guide on harmonics and 2002 CENELEC 0 interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto - Incorporates Amendment A1: 2009 4897 EN 50306-2 Railway applications Railway rolling stock cables having special fire performance Thin wall Part 2: Single core cables 2002 CENELEC 0 4898 EN 60747-16-3 Semiconductor devices - Part 16-3: Microwave integrated circuits - Frequency converters - Incorporates Amendment A2: 2002 CENELEC 0 2017 4899 EN 60730-2-19 Automatic electrical controls for household and similar use Part 2-19: Particular requirements for electrically operated oil 2002 CENELEC 0 valves, including mechanical requirements - Incorporates Amendments A11 and A2: 2005 4900 EN 60512-11-2 Connectors for Electronic Equipment - Tests and Measurements Part 11-2: Climatic Tests - Test 11b: Combined/Sequential 2002 CENELEC 0 Cold, Low Air Pressure and Damp Heat 4901 EN 61851-21 Electric Vehicle Conductive Charging System Part 21: Electric Vehicle Requirements for Conductive Connection to an 2002 CENELEC 0 a.c/d.c. Supply - Remains Current 4902 EN 50216-5 Power transformer and reactor fittings Part 5: Liquid level, pressure and flow indicators, pressure relief devices and 2002 CENELEC 0 dehydrating breathers - Incorporates Amendments A1: 2002, A2: 2005 and A3: 2006 4903 EN 50117-1 Coaxial Cables Part 1: Generic Specification - Incorporates Amendment A2: 2013 2002 CENELEC 0 4904 EN 50290-2-27 Communication cables Part 2-27: Common design rules and construction Halogen free flame retardant thermoplastic 2002 CENELEC 0 sheathing compounds - Incorporates Amendment A1: 2007; Incorporating Corrigendum May 2010 4905 EN 61249-2-18 Materials for Printed Boards and Other Interconnecting Structures - Part 2-18: Reinforced Base Materials, Clad and Unclad 2002 CENELEC 0 - Polyester Non-Woven Fibreglass Reinforced Laminated Sheet of Defined Flammability (Vertical Burning Test), Copper- Clad 4906 EN 61603-6 Transmission of Audio and/or Video and Related Signals Using Infra-Red Radiation Part 6: Video and Audio-Visual 2002 CENELEC 0 Signals 4907 EN 61922 High-frequency induction heating installations - Test methods for the determination of power output of the generator 2002 CENELEC 0 4908 EN 60512-1-2 Connectors for Electronic Equipment - Tests and Measurements Part 1-2: General Examination - Test 1b: Examination of 2002 CENELEC 0 Dimensions and Mass 4909 EN 60335-2-87 Household and similar electrical appliances - Safety Part 2-87: Particular requirements for electrical animal-stunning 2002 CENELEC 0 equipment - Incorporates Amendment A1: 2007 4910 EN 60512-11-3 Connectors for Electronic Equipment - Tests and Measurements Part 11-3: Climatic Tests - Test 11c: Damp Heat, Steady 2002 CENELEC 0 State 4911 EN 61162-420 Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces Part 420: Multiple Talkers and 2002 CENELEC 0 Multiple Listeners - Ship Systems Interconnection - Companion Standard Requirements and Basic Companion Standards 4912 EN 61967-6 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 6: Measurement of conducted 2002 CENELEC 0 emissions - Magnetic probe method - Incorporates Amendment A1: 2008 4913 EN 62219 Overhead electrical conductors Formed wire, concentric lay, stranded conductors 2002 CENELEC 0 4914 EN 50325-4 Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces Part 4: CANopen 2002 CENELEC 0 4915 EN 60512-5-2 Connectors for Electronic Equipment - Tests and Measurements Part 5-2: Current-Carrying Capacity Tests - Test 5b: 2002 CENELEC 0 Current-Temperature Derating 4916 EN 187105 Single Mode Optical Cable (Duct/Direct Buried Installation) 2002 CENELEC 0 4917 EN 60068-3-7 Environmental Testing - Part 3-7: Supporting Documentation and Guidance - Measurements in Temperature Chambers for 2002 CENELEC 0 Tests A and B (With Load) 4918 EN 61514 Industrial-Process Control Systems - Methods of Evaluating the Performance of Valve Positioners with Pneumatic Outputs 2002 CENELEC 0 4919 EN 50290-2-30 Communication Cables Part 2-30: Common Design Rules and Construction - Poly(Tetrafluoroethylene- 2002 CENELEC 0 Hexafluoropropylene)(FEP) Insulation and Sheathing 4920 EN 62262 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) 2002 CENELEC 0 4921 EN 61512-2 Batch control - Part 2: Data structures and guidelines for languages 2002 CENELEC 0 4922 EN 60512-11- Connectors for Electronic Equipment - Tests and Measurements Part 11-12: Climatic Tests - Test 11m: Damp Heat, Cyclic 2002 CENELEC 0 12 4923 EN 50324-2 Piezoelectric properties of ceramic materials and components Part 2: Methods of measurement - Low power 2002 CENELEC 0 4924 EN 61754-3 Fibre Optic Connector Interfaces Part 3: Type LSA Connector Family 2002 CENELEC 0 4925 EN 60684-3- Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 420 to 422: Polyethylene 2002 CENELEC 0 420 TO 422 Terephthalate Textile Sleeeving with Acrylic Based Coating 4926 EN 50305 Railway Applications - Railway Rolling Stock Cables Having Special Fire Performance - Test Methods 2002 CENELEC 0 4927 EN 60730-2-8 Automatic electrical controls for household and similar use Part 2-8: Particular requirements for electrically operated water 2002 CENELEC 0 valves, including mechanical requirements - Incorporates Amendment A1: 2003 4928 EN 60335-2-83 Household and similar electrical appliances - Safety Part 2-83: Particular requirements for heated gullies for roof drainage - 2002 CENELEC 0 Incorporates Amendment A1: 2008 4929 EN 62011-1 Insulating Materials - Industrial, Rigid, Moulded, Laminated Tubes and Rods of Rectangular and Hexagonal Cross-Section 2002 CENELEC 0 Based on Thermosetting Resins for Electrical Purposes Part 1: Definitions, Designations and General Requirements 4930 EN 61676 Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in 2002 CENELEC 0 diagnostic radiology - Incorporates Amendment A1: 2009 4931 EN 50387 Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers 2002 CENELEC 0 4932 EN 50216-2 Power transformer and reactor fittings Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with 2002 CENELEC 0 conservator - Incorporates Amendment A1: 2002 4933 EN 62056-46 Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control Part 46: Data Link Layer Using HDLC 2002 CENELEC 0 Protocol - Incorporates Amendment A1: 2007 4934 EN 60512-6-4 Connectors for Electronic Equipment - Tests and Measurements - Part 6-4: Dynamic Stress Test 6d: Vibration (Sinusoidal) 2002 CENELEC 0 4935 EN 60746-3 Expression of performance of electrochemical analyzers Part 3: Electrolytic conductivity 2002 CENELEC 0 4936 EN 61947-2 Electronic Projection - Measurement and Documentation of Key Performance Criteria Part 2: Variable Resolution 2002 CENELEC 0 Projectors 4937 EN 60352-7 (FAULTY STANDARD) Solderless Connections - Part 7: Spring Clamp Connections - General Requirements, Test 2002 CENELEC 0 Methods and Practical Guidance 4938 EN 62056-42 Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control Part 42: Physical Layer Services and 2002 CENELEC 0 Procedures for Connection-Oriented Asynchronous Data Exchange 4939 EN 60512-11-6 Connectors for Electronic Equipment - Tests and Measurements Part 11-6: Climatic Tests - Test 11f: Corrosion, Salt Mist 2002 CENELEC 0 4940 EN 60684-3- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 300: Glass textile fibre sleeving, 2002 CENELEC 0 300 braided, uncoated 4941 EN 62044-1 Cores made of soft magnetic materials - Measuring methods Part 1: Generic specification 2002 CENELEC 0 4942 EN 50216-3 Power transformer and reactor fittings Part 3: Protective relay for hermetically sealed liquid-immersed transformers and 2002 CENELEC 0 reactors without gaseous cushion - Incorporates Amendments A1: 2002 and A2: 2006 4943 EN 62326-1 Printed Boards Part 1: Generic Specification 2002 CENELEC 0 4944 EN 61193-1 Quality Assessment Systems - Part 1: Registration and Analysis of Defects on Printed Board Assemblies 2002 CENELEC 0 4945 EN 60335-2- Household and similar electrical appliances - Safety Part 2-101: Particular requirements for vaporizers - Incorporates 2002 CENELEC 0 101 Amendment A2: 2014 4946 EN 61754-18 Fiber Optic Connector Interfaces Part 18: Type MT-RJ Connector Family 2002 CENELEC 0 4947 EN 50377-6-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications 2002 CENELEC 0 Part 6-1: Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre 4948 EN 60684-3- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 240 to 243: Heat-shrinkable PTFE 2002 CENELEC 0 240 TO 243 sleeving 4949 EN 45510-4-5 Guide for the Procurement of Power Station Equipment - Part 4-5: Boiler Auxiliaries - Coal Handling and Bulk Storage 2002 CENELEC 0 Plant 4950 EN 60684-3- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 343 to 345: Expandable braided 2002 CENELEC 0 343 TO 345 ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated 4951 EN 60512-6-3 Connectors for Electronic Equipment - Tests and Measurements Part 6-3: Dynamic Stress Tests - Test 6c: Shock 2002 CENELEC 0 4952 EN 50324-1 Piezoelectric Properties of Ceramic Materials and Components Part 1: Terms and Definitions 2002 CENELEC 0 4953 EN 60702-2 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 2: Terminations - 2002 CENELEC 0 Incorporates Amendment A1: 2015 4954 EN 60512-2-6 Connectors for Electronic Equipment - Tests and Measurements Part 2-6: Electrical Continuity and Contact Resistance 2002 CENELEC 0 Tests - Test 2f: Housing (Shell) Electrical Continuity 4955 EN 61076-4- Connectors for Electronic Equipment - Part 4-110: Printed Board Connectors with Assessed Quality - Detail Specification 2002 CENELEC 0 110 for Latched Cable Connector System Having a Basic Grid of 2,0 mm Including Full Shielding and Latching Function 4956 EN 60793-1-21 Optical Fibres - Part 1-21: Measurement Methods and Test Procedures - Coating Geometry 2002 CENELEC 0 4957 EN 61000-2-4 Electromagnetic Compatibility (EMC) Part 2-4: Environment - Compatibility Levels in Industrial Plants for Low- 2002 CENELEC 0 Frequency Conducted Disturbances 4958 EN 50336 Bushings for transformers and reactor cable boxes not exceeding 36 kV 2002 CENELEC 0 4959 EN 50325-1 Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces Part 1: General 2002 CENELEC 0 requirements 4960 EN 61207-3 Gas analyzers - Expression of performance Part 3: Paramagnetic oxygen analyzers 2002 CENELEC 0 4961 EN 60335-2-70 Household and similar electrical appliances - Safety Part 2-70: Particular requirements for milking machines - Incorporates 2002 CENELEC 0 Amendment A1: 2007 4962 EN 60704-2-3 Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-3: Particular 2002 CENELEC 0 requirements for dishwashers - Incorporates Amendment A1: 2005 4963 EN 61851-22 Electric Vehicle Conductive Charging System Part 22: AC Electric Vehicle Charging Station 2002 CENELEC 0 4964 EN 50216-7 Power Transformer and Reactor Fittings Part 7: Electric Pumps for Transformer Oil 2002 CENELEC 0 4965 EN 61162-410 Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces Part 410: Multiple Talkers and 2002 CENELEC 0 Multiple Listeners - Ship Systems Interconnection - Transport Profile Requirements and Basic Transport Profile 4966 EN 50083-9 Cable networks for television signals, sound signals and interactive services Part 9: Interfaces for CATV/SMATV headends 2002 CENELEC 0 and similar professional equipment for DVB/MPEG-2 transport streams 4967 EN 50134-1 Alarm Systems - Social Alarm Systems Part 1: System Requirements 2002 CENELEC 0 4968 EN 60945 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and 2002 CENELEC 0 required test results 4969 EN 60749-11 Semiconductor Devices Mechanical and Climatic Test Methods Part 11: Rapid Change of Temperature Two-Fluid-Bath 2002 CENELEC 0 Method 4970 EN 50346 Information technology - Cabling installation - Testing of installed cabling - Incorporates Amendment A2: 2009 2002 CENELEC 0 4971 EN 61076-4- Connectors for Electronic Equipment Part 4-111: Printed Board Connectors with Assessed Quality - Detail Specification 2002 CENELEC 0 111 for Two-Part Power Connector Modules, for Printed Boards and Backplanes Having Early Mating Features, and Having a Basic Grid of 2,5 mm i 4972 EN 50290-2-28 Communication Cables Part 2-28: Common Design Rules and Construction - Filling Compounds for Filled Cables 2002 CENELEC 0 4973 EN 61188-5-1 Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic 2002 CENELEC 0 requirements 4974 EN 60335-2-96 Household and similar electrical appliances - Safety Part 2-96: Particular requirements for flexible sheet heating elements 2002 CENELEC 0 for room heating - Incorporates Amendment A2: 2009 4975 EN 60335-2-45 Household and similar electrical appliances - Safety Part 2-45: Particular requirements for portable heating tools and 2002 CENELEC 0 similar appliances - Incorporates Amendment A2: 2012 4976 EN 60359 Electrical and Electronic Measurement Equipment - Expression of Performance 2002 CENELEC 0 4977 EN 60684-3- Flexible Insulating Sleeving Part 3: Specification for Individual Types of Sleeving Sheets 403 to 405: Glass Textile 2002 CENELEC 0 403 TO 405 Sleeving with Acrylic Based Coating 4978 EN 60052 Voltage Measurement by Means of Standard Air Gaps 2002 CENELEC 0 4979 EN 60684-3- Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 320: Polyethylene terephthalate 2002 CENELEC 0 320 textile sleeving, lightly impregnated 4980 EN 60512-25-2 Connectors for Electronic Equipment - Tests and Measurements Part 25-2: Test 25b: Attenuation (Insertion Loss) 2002 CENELEC 0 4981 EN 61643-321 Components for Low-Voltage Surge Protective Devices Part 321: Specifications for Avalanche Breakdown Diode (ABD) 2002 CENELEC 0 4982 EN 50306-4 Railway applications Railway rolling stock cables having special fire performance Thin wall Part 4: Multicore and 2002 CENELEC 0 multipair cables standard wall sheathed 4983 EN 60512-11- Connectors for Electronic Equipment - Tests and Measurements - Part 11-10: Climatic Tests - Test 11j: Cold 2002 CENELEC 0 10 4984 EN 61162-401 Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces Part 401: Multiple Talkers and 2002 CENELEC 0 Multiple Listeners - Ship Systems Interconnection - Application Profile 4985 EN 60335-2-44 Household and similar electrical appliances - Safety Part 2-44: Particular requirements for ironers - Incorporates 2002 CENELEC 0 Amendment A2: 2012 4986 EN 61000-2-2 Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted 2002 CENELEC 0 disturbances and signalling in public low-voltage power supply systems - Incorporates Amendment A1: 2017 4987 EN 61190-1-1 Attachment Materials for Electronic Assembly - Part 1-1: Requirements for Soldering Fluxes for High-Quality 2002 CENELEC 0 Interconnections in Electronics Assembly 4988 EN 60512-11-5 Connectors for Electronic Equipment - Tests and Measurements Part 11-5: Climatic Tests - Test 11e: Mould Growth 2002 CENELEC 0 4989 EN 61967-1 Integrated Circuits - Measurement of Electromagnetic Emissions, 150 kHZ to 1 GHz Part 1: General Conditions and 2002 CENELEC 0 Definitions 4990 EN 62122 Methods of Measurement for Consumer-Use Digital VTRs - Electronic and Mechanical Performances 2002 CENELEC 0 4991 CECC 96 601 Blank Detail Specification: Slide switches 2002 CENELEC 0 4992 EN 61249-2-7 Materials for Printed Boards and Other Interconnecting Structures Part 2-7: Reinforced Base Materials Clad and Unclad - 2002 CENELEC 0 Epoxide Woven E-Glass Laminated Sheet of Defined Flammability (Vertical Burning Test), Copper-Clad - Incorporating Corrigendum Septembe 4993 EN 60512-11- Connectors for Electronic Equipment - Tests and Measurements - Part 11-11: Climatic Tests - Test 11k: Low Air Pressure 2002 CENELEC 0 11 4994 EN 50384 Product Standard to Demonstrate the Compliance of Radio Base Stations and Fixed Terminal Stations for Wireless 2002 CENELEC 0 Telecommunication Systems with the Basic Restrictions or the Reference Levels Related to Human Exposure to Radio Frequency Electromagnetic Field 4995 EN 50365 Electrically Insulating Helmets for Use on Low Voltage Installations 2002 CENELEC 0 4996 EN 62105 Digital audio broadcasting system Specification of the receiver data interface (RDI) 2002 CENELEC 0 4997 EN 60749-10 Semiconductor Devices - Mechanical and Climatic Test Methods Part 10: Mechanical Shock 2002 CENELEC 0 4998 EN 62012-1 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Part 1: Generic 2002 CENELEC 0 specification 4999 EN 60512-4-2 Connectors for Electronic Equipment - Tests and Measurements Part 4-2: Voltage Stress Tests - Test 4b: Partial Discharge 2002 CENELEC 0 5000 EN 60512-3-1 Connectors for electronic equipment Tests and measurements Part 3-1: Insulation tests Test 3a: Insulation resistance 2002 CENELEC 0 5001 EN 50290-2-26 Communication cables Part 2-26: Common design rules and construction Halogen free flame retardant insulation 2002 CENELEC 0 compounds - Incorporates Amendment A1: 2007 5002 EN 60076-4 Power Transformers - Part 4: Guide to the Lightning Impulse and Switching Impulse Testing - Power Transformers and 2002 CENELEC 0 Reactors 5003 EN 50375 Testing methodology for wipers used in electrical insulating oil 2002 CENELEC 0 5004 EN 60073 Basic and Safety Principles for Man-Machine Interface, Marking and Identification - Coding Principles for Indication 2002 CENELEC 0 Devices and Actuators 5005 EN 60512-6-2 Connectors for Electronic Equipment - Tests and Measurements - Part 6-2: Dynamic Stress Tests - Test 6b: Bump 2002 CENELEC 0 5006 EN 60127-10 Miniature Fuses - Part 10: User Guide for Miniature Fuses 2002 CENELEC 0 5007 EN 60730-2-2 Automatic electrical controls for household and similar use Part 2-2: Particular requirements for thermal motor protectors - 2002 CENELEC 0 Incorporates Amendments A11: 2005 and A1: 2006 5008 EN 60512-1-1 Connectors for Electronic Equipment - Tests and Measurements Part 1-1: General Examination - Test 1a: Visual 2002 CENELEC 0 Examination 5009 EN 50250 Conversion adaptors for industrial use - Incorporating Corrigendum August 2007; Incorporates Amendment A1: 2015 2002 CENELEC 0 5010 EN 61967-4 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 4: Measurement of conducted 2002 CENELEC 0 emissions - 1 ohm/150 ohm direct coupling method - Incorporates Amendment A1: 2006; Incorporating Corrigendum December 2006 5011 EN 50306-3 Railway applications - Railway rolling stock cables having special fire performance - Thin wall Part 3: Single core and 2002 CENELEC 0 multicore cables (pairs, triples and quads) screened and thin wall sheathed 5012 EN 60404-14 Magnetic materials Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen 2002 CENELEC 0 by the withdrawal or rotation method 5013 EN 61076-4- Connectors for electronic equipment Part 4-108: Printed board connectors with assessed quality Detail specification for 2002 CENELEC 0 108 cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density o 5014 EN 60191-6-2 Mechanical Standardization of Semiconductor Devices Part 6-2: General Rules for the Preparation of Outline Drawings of 2002 CENELEC 0 Surface Mounted Semiconductor Device Packages - Design Guide for 1,50 mm, 1,27 mm and 1,00 mm Pitch Ball and Column Terminal Packages 5015 EN 61290-5-3 Optical Fibre Amplifiers - Basic Specification Part 5-3: Test Methods for Reflectance Parameters - Reflectance Tolerance 2002 CENELEC 0 Using an Electrical Spectrum Analyser 5016 EN 50289-1-6 Communication Cables - Specifications for Test Methods Part 1-6: Electrical Test Methods - Electromagnetic Performance 2002 CENELEC 0 5017 EN 50289-4-11 Communication Cables - Specifications for Test Methods Part 4-11: Environmental Test Methods - a Horizontal Integrated 2002 CENELEC 0 Fire Test Method 5018 EN 61947-1 Electronic projection - Measurement and documentation of key performance criteria Part 1: Fixed resolution projectors 2002 CENELEC 0 5019 EN 60793-1-22 Optical Fibres Part 1-22: Measurement Methods and Test Procedures - Length Measurement 2002 CENELEC 0 5020 EN 50324-3 Piezoelectric properties of ceramic materials and components Part 3: Methods of measurement - High power 2002 CENELEC 0 5021 EN 50290-2-24 Communication cables Part 2-24: Common design rules and construction PE sheathing - Incorporates Amendment A1: 2002 CENELEC 0 2008 5022 EN 61754-19 Fiber Optic Connector Interfaces Part 19: Type SG Connector Family 2002 CENELEC 0 5023 EN 60512-4-3 Connectors for Electronic Equipment - Tests and Measurements - Part 4-3: Voltage Stress Tests - Test 4c: Voltage Proof of 2002 CENELEC 0 Pre-Insulted Crimp Barrels 5024 EN 61000-4-25 Electromagnetic compatibility (EMC) Part 4-25: Testing and measurement techniques HEMP immunity test methods for 2002 CENELEC 0 equipment and systems - Incorporates Amendment A1: 2012 5025 EN 61300-3-26 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-26: 2002 CENELEC 0 Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes 5026 EN 60993 Electrolyte for Vented Nickel-Cadmium Cells 2002 CENELEC 0 5027 EN 60747-16-1 Semiconductor devices Part 16-1: Microwave integrated circuits Amplifiers - Incorporates Amendment A2: 2017 2002 CENELEC 0 5028 EN 50216-1 Power Transformer and Reactor Fittings Part 1: General 2002 CENELEC 0 5029 EN 61842 Microphones and Earphones for Speech Communications 2002 CENELEC 0 5030 EN 60512-6-1 Connectors for Electronic Equipment - Tests and Measurements Part 6-1: Dynamic Stress Tests - Test 6a: Acceleration, 2002 CENELEC 0 Steady State 5031 EN 81714-3 Design of Graphical Symbols for Use in the Technical Documentation of Products Part 3: Classification of Connect Nodes, 2001 CENELEC 0 Networks and Their Encoding 5032 EN 50290-1-1 Communication Cables - Part 1-1: General 2001 CENELEC 0 5033 EN 50289-3-4 Communication Cables - Specifications for Test Methods Part 3-4: Mechanical Test Methods - Tensil Strength, Elongation 2001 CENELEC 0 and Shrinkage of Insulation and Sheath 5034 EN 61076-4- Connectors for Electronic Equipment Part 4-101: Printed Board Connectors with Assessed Quality - Detail Specification 2001 CENELEC 0 101 for Two-Part Connector Modules, Having a Basic Grid of 2,0 mm for Printed Boards and Backplanes in Accordance with IEC 60917 5035 EN 61685 Ultrasonics - Flow Measurement Systems - Flow Test Object 2001 CENELEC 0 5036 EN 60464-3-1 Varnishes Used for Electrical Insulation Part 3: Specifications for Individual Materials Sheet 1: Ambient Curing Finishing 2001 CENELEC 0 Varnishes - Incorporates Amendment A1: 2006 5037 EN 61204-6 Low-Voltage Power Supplies, DC Output Part 6: Requirements for Low-Voltage Power Supplies of Assessed Performance 2001 CENELEC 0 5038 EN 60139 Preparation of Outline Drawings for Cathode-Ray Tubes, their Components, Connections and Gauges 2001 CENELEC 0 5039 EN 61691-3-3 Behavioural Languages - Part 3-3: Synthesis in VHDL 2001 CENELEC 0 5040 HD 586.3 S1 Mineral Insulated Cables with a Rated Voltage Not Exceeding 750 V Part 3: Guide to Use 2001 CENELEC 0 5041 EN 60264-5-2 Packaging of Winding Wires Part 5-2: Cylindrical Barrelled Delivery Spools with Conical Flanges - Specification for 2001 CENELEC 0 Returnable Spools Made from Thermoplastic Material 5042 EN 82045-1 Document Management Part 1: Principles and Methods 2001 CENELEC 0 5043 EN 50289-3-9 Communication Cables - Specifications for Test Methods Part 3-9: Mechanical Test Methods - Bending Tests 2001 CENELEC 0 5044 EN 60191-6-5 Mechanical Standardization of Semiconductor Devices Part 6-5: General Rules for the Preparation of Outline Drawings of 2001 CENELEC 0 Surface Mounted Semiconductor Device Packages - Design Guide for Fine-Pitch Ball Grid Array (FBGA) 5045 EN 50171 Central Power Supply Systems - Incorporating Corrigendum August 2001 2001 CENELEC 0 5046 EN 62070 Broadcast Digital Video Tape Recorders - Identification Method for Recording and/or Reproduction Error Status 2001 CENELEC 0 5047 EN 60534-3-2 Industrial-Process Control Valves Part 3-2: Dimensions - Face-to-Face Dimensions for Rotary Control Valves Except 2001 CENELEC 0 Butterfly Valves 5048 EN 61347-2-11 Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires - 2001 CENELEC 0 Incorporating corrigendum December 2010 5049 EN 61083-1 Instruments and Software Used for Measurement in High-Voltage Impulse Tests - Part 1: Requirements for Instruments 2001 CENELEC 0 5050 EN 62099 Fibre Optic Wavelength Switches - Generic Specification 2001 CENELEC 0 5051 EN 61518 Mating Dimensions between Differential Pressure (Type) Measuring Instruments and Flanged-On Shut-Off Devices Up to 2001 CENELEC 0 413 Bar (41,3 MPa) - Incorporating corrigendum February 2002 5052 EN 60747-5-1 Discrete semiconductor devices and integrated circuits Part 5-1: Optoelectronic devices General - Incorporates 2001 CENELEC 0 Amendments A1: 2002 and A2: 2002; Remains Current 5053 EN 60255-24 Electrical Relays Part 24: Common Format for Transient Data Exchange (COMTRADE) for Power Systems 2001 CENELEC 0 5054 EN 61966-8 Multimedia Systems and Equipment - Colour Measurement and Management - Part 8: Multimedia Colour Scanners 2001 CENELEC 0 5055 EN 62044-3 Cores Made of Soft Magnetic Materials - Measuring Methods Part 3: Magnetic Properties at High Excitation Level 2001 CENELEC 0 5056 EN 50201 Interfaces for DVB-IRD 2001 CENELEC 0 5057 EN 50289-3-16 Communication Cables - Specifications for Test Methods - Part 3-16: Mechanical Test Methods - Cable Tensile 2001 CENELEC 0 Performance 5058 EN 61481 Live working Portable phase comparators for use on voltages from 1 kV to 36 kV a.c. - Incorporates Amendments A1: 2001 CENELEC 0 2002 and A2: 2005 5059 EN 60270 High-voltage test techniques - Partial discharge measurements - Incorporates Amendment A1:2016 2001 CENELEC 0 5060 EN 50290-2-22 Communication Cables - Part 2-22: Common Design Rules and Construction - PVC Sheathing Compounds - Incorporates 2001 CENELEC 0 Amendment A1: 2007 5061 EN 60454-3-14 Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 14: 2001 CENELEC 0 Polytetrafluoroethylene Film Tapes with Pressure-Sensitive Adhesive 5062 EN 62005-2 Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 2: Quantitative Assessment of Relibility 2001 CENELEC 0 Based on Accelerated Ageing Tests - Temperature and Humidity; Steady State 5063 EN 61000-5-7 Electromagnetic Compatibility (EMC) Part 5-7: Installation and Mitigation Guidelines - Degrees of Protection by 2001 CENELEC 0 Enclosures Against Electromagnetic Disturbances (EM Code) 5064 EN 61061-2 Specification for Non-Impregnated, Densified Laminated Wood for Electrical Purposes Part 2: Methods of Test 2001 CENELEC 0 5065 EN 50289-1-10 Communication Cables - Specifications for Test Methods - Part 1-10: Electrical Test Methods - Crosstalk 2001 CENELEC 0 5066 EN 61631 Test Method for the Mechanical Strength of Cores Made of Magnetic Oxides 2001 CENELEC 0 5067 EN 61834-10 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 2001 CENELEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) Part 10: DTV Format 5068 EN 60819-2 Non-Cellulosic Papers for Electrical Purposes Part 2: Methods of Test 2001 CENELEC 0 5069 EN 61334-3-22 Distribution Automation Using Distribution Line Carrier Systems Part 3-22: Mains Signalling Requirements - MV Phase- 2001 CENELEC 0 to-Earth and Screen-to-Earth Intrusive Coupling Devices 5070 EN 60188 High-Pressure Mercury Vapour Lamps - Performance Specifications 2001 CENELEC 0 5071 EN 61076-4- Connectors for Electronic Equipment - Part 4-107: Printed Board Connectors with Assessed Quality - Detail Specification 2001 CENELEC 0 107 for Shielded Two-Part Connectors Having a Basic Grid of 2,0 mm, Fixed Part with Solder and Press-in Terminations for Printed Boards, Fr 5072 EN 60191-6-1 Mechanical Standardization of Semiconductor Devices Part 6-1: General Rules for the Preparation of Outline Drawings of 2001 CENELEC 0 Surface Mounted Semiconductor Device Packages - Design Guide for Gull-Wing Lead Terminals 5073 EN 62107 Super Video Compact Disc - Disc-Interchange System-Specification 2001 CENELEC 0 5074 EN 50289-1-4 Communication Cables - Specifications for Test Methods Part 1-4: Electrical Test Methods - Insulation Resistance 2001 CENELEC 0 5075 EN 60819-3-1 Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: Filled Glass Paper 2001 CENELEC 0 5076 EN 50289-3-11 Communication Cables - Specifications for Test Methods - Part 3-11: Mechanical Test Methods - Cable Cut-Through 2001 CENELEC 0 Resistance 5077 EN 60512-23-4 Connectors for Electronic Equipment - Tests and Measurements Part 23-4: Screening and Filtering Tests - Test 23D: 2001 CENELEC 0 Transmission Line Reflections in the Time Domain 5078 EN 60512-12-7 Connectors for Electronic Equipment - Tests and Measurements Part 12-7: Soldering Tests - Test 12g: Solderability, 2001 CENELEC 0 Wetting Balance Method 5079 R0BT-004 EC Directives, Functional Safety and the Role of CENELEC Standardization 2001 CENELEC 0 5080 EN 61754-9 Fibre Optic Connector Interfaces - Part 9: Type DS Connector Family 2001 CENELEC 0 5081 EN 62005-1 Reliability of Fibre Optic Interconnecting Devices and Passive Components Part 1: Introductory Guide and Definitions 2001 CENELEC 0 5082 EN 61131-5 Programmable Controllers Part 5: Communications 2001 CENELEC 0 5083 EN 60534-6-2 Industrial-Process Control Valves Part 6-2: Mounting Details for Attachment of Positioners to Control Valves - Positioner 2001 CENELEC 0 Mounting on Rotary Actuators 5084 EN 60191-6-8 Mechanical Standardization of Semiconductor Devices Part 6-8: General Rules for the Preparation of Outline Drawings of 2001 CENELEC 0 Surface Mounted Semiconductor Device Packages - Design Guide for Glass Sealed Ceramic Quad Flatpack (G-QFP) 5085 EN 50289-3-5 Communication Cables - Specifications for Test Methods Part 3-5: Mechanical Test Methods - Crush Resistance of the 2001 CENELEC 0 Cable 5086 EN 50289-4-9 Communication Cables - Specifications for Test Methods Part 4-9: Environmental Test Methods - Pneumatic Resistance 2001 CENELEC 0 5087 EN 50289-3-12 Communication Cables - Specifications for Test Methods - Part 3-12: Mechanical Test Methods - Shot Gun Damage 2001 CENELEC 0 5088 EN 50341-2 Overhead electrical lines exceeding AC 45 kV Part 2: Index of National Normative Aspects - Incorporating corrigendum 2001 CENELEC 0 October 2006 5089 EN 50347 General Purpose Three-Phase Induction Motors Having Standard Dimensions and Outputs - Frame Numbers 56 to 315 and 2001 CENELEC 0 Flange Numbers 65 to 740 5090 EN 62121 Methods of Measurement for Minidisc Recorders/Players 2001 CENELEC 0 5091 EN 50289-4-2 Communication Cables - Specifications for Test Methods Part 4-2: Environmental Test Methods - Water Penetration 2001 CENELEC 0 5092 EN 60464-3-2 Varnishes Used for Electrical Insulation Part 3: Specifications for Individual Materials Sheet 2: Hot Curing Impregnating 2001 CENELEC 0 Varnishes - Incorporates Amendment A1: 2006 5093 EN 60819-3-2 Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Hybrid Inorganic- 2001 CENELEC 0 Organic Paper 5094 EN 50353 Insulating Oil - Determination of Fibre Contamination by the Counting Method Using a Microscope 2001 CENELEC 0 5095 EN 61788-5 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of 2001 CENELEC 0 Cu/Nb-Ti composite superconductors 5096 EN 50344-1 Routine Tests for Controls within the Scope of the EN 60730 Series - Part 1: General Requirements - Incorporating 2001 CENELEC 0 Corrigendum October 2001 5097 EN 170100 Harmonized System of Quality Assessment for Electronic Components - Sectional Specification: Waveguide Type 2001 CENELEC 0 Dielectric Resonators 5098 EN 12589 Ventilation for Buildings - Air Terminal Units - Aerodynamic Testing and Rating of Constant and Variable Rate Terminal 2001 CENELEC 0 Units 5099 EN 50334 Marking by Inscription for the Identification of Cores of Electric Cables 2001 CENELEC 0 5100 EN 60464-2 Varnishes used for electrical insulation Part 2: Methods of test - Incorporates Amendment A1: 2006; Incorporating 2001 CENELEC 0 Corrigendum December 2006 5101 EN 61016 Helical-Scan Digital Component Video Cassette Recording System Using 19 mm Magnetic Tape (Format D-1) 2001 CENELEC 0 5102 EN 61347-2-10 Lamp controlgear Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of 2001 CENELEC 0 cold start tubular discharge lamps (neon tubes) - Incorporates Amendment A1: 2009 5103 EN 170101 Blank Detail Specification: Waveguide Type Dielectric Resonators - Capability Approval Blank Detail Specification: 2001 CENELEC 0 Waveguide Type Dielectric Resonators - Capability Approval 5104 EN 61347-2-1 Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters) - Incorporating 2001 CENELEC 0 Corrigenda July 2003, November 2006 and December 2010; Incorporates Amendment A2: 2014 5105 EN 62156 Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and 625/50 (digital S) 2001 CENELEC 0 5106 EN 61300-3-20 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures Part 3-20: 2001 CENELEC 0 Examinations and Measurements - Directivity of Fibre Optic Branching Devices - Incorporating Corrigendum March 2002 5107 EN 61334-5-1 Distribution Automation Using Distribution Line Carrier Systems Part 5-1: Lower Layer Profiles - the Spread Frequency 2001 CENELEC 0 Shift Keying (S-FSK) Profile 5108 EN 60512-25-4 Connectors for Electronic Equipment - Tests and Measurements Part 25-4: Test 25d - Propagation Delay 2001 CENELEC 0 5109 EN 60512-25-1 Connectors for Electronic Equipment - Tests and Measurements Part 25-1: Test 25a - Crosstalk Ratio 2001 CENELEC 0 5110 EN 60192 Low Pressure Sodium Vapour Lamps - Performance Specifications 2001 CENELEC 0 5111 EN 61076-4- Connectors for Electronic Equipment - Part 4-100: Printed Board Connectors with Assessed Quality - Detail Specification 2001 CENELEC 0 100 for Two-Part Connector Modules Having a Grid of 2,5 mm for Printed Boards and Backplanes 5112 EN 50289-4-1 Communication Cables - Specifications for Test Methods Part 4-1: Environmental Test Methods - General Requirements 2001 CENELEC 0 5113 EN 50289-1-3 Communication Cables - Specifications for Test Methods Part 1-3: Electrical Test Methods - Dielectric Strength 2001 CENELEC 0 5114 EN 60512-25-3 Connectors for Electronic Equipment - Tests and Measurement Part 25-3: Test 25c - Rise Time Degradation 2001 CENELEC 0 5115 EN 60317-51 Specifications for Particular Types of Winding Wires Part 51: Solderable Polyurethane Enamelled Round Copper Wire, 2001 CENELEC 0 Class 180 5116 EN 60684-3- Flexible Insulating Sleeving Part 3: Specifications for Individual Types of Sleeving Sheets 145 to 147: Extruded PTFE 2001 CENELEC 0 145 TO 147 Sleeving 5117 EN 50289-1-7 Communication Cables - Specifications for Test Methods Part 1-7: Electrical Test Methods - Velocity of Propagation 2001 CENELEC 0 5118 EN 61643-341 Components for Low-Voltage Surge Protective Devices - Part 341: Specification for Thyristor Surge Suppressors (TSS) 2001 CENELEC 0 5119 EN 61378-2 Convertor Transformers Part 2: Transformers for HVDC Applications 2001 CENELEC 0 5120 EN 60747-5-3 Discrete semiconductor devices and integrated circuits Part 5-3: Optoelectronic devices Measuring methods - Incorporates 2001 CENELEC 0 Amendment A1: 2002; Remains Current 5121 EN 61479 Live working - Flexible conductor covers (line hoses) of insulating material - Incorporates Amendment A1: 2002 2001 CENELEC 0 5122 EN 50065-7 Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148,5 kHz - Part 7: Equipment 2001 CENELEC 0 Impedance 5123 EN 61243-5 Live Working - Voltage Detectors - Part 5: Voltage Detecting Systems (VDS) 2001 CENELEC 0 5124 EN 60684-3- Flexible Insulating Sleeving Part 3: Specifications for Individual Types of Sleeving Sheets 121 and 124: Extruded Silicone 2001 CENELEC 0 121 TO 124 Sleeving 5125 EN 80416-2 Basic Principles for Graphical Symbols for Use on Equipment Part 2: Form and Use of Arrows 2001 CENELEC 0 5126 EN 61061-3-2 Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 3: Specifications for Individual Materials - 2001 CENELEC 0 Sheet 2: Sheets Produced from Beech Veneer 5127 EN 60191-6-6 Mechanical Standardization of Semicondutor Devices Part 6-6: General Rules for the Preparation of Outline Drawings of 2001 CENELEC 0 Surface Mounted Semiconductor Device Packages - Design Guide for Fine Pitch Land Grid Array (FLGA) 5128 EN 61834-8 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 2001 CENELEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) Part 8: PALplus Format for the 625-50 System 5129 EN 50290-2-21 Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds - Incorporates 2001 CENELEC 0 Amendment A1: 2007; Incorporating corrigendum February 2016 5130 EN 50377-2-1 Connectors Sets and Interconnect Components to Be Used in Optical Fibre Communication Systems - Product 2001 CENELEC 0 Specifications Part 2-1: Type FC-PC Terminated on IEC 60793-2 Category B1 Singlemode Fibre - Incorporating Corrigendum March 2002 5131 EN 60512-23-3 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods Part 23-3: 2001 CENELEC 0 Test 23c: Shielding Effectiveness of Connectors and Accessories - Incorporating Corrigendum April 2003 5132 EN 62005-3 Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 3: Relevant Tests for Evaluating Failure 2001 CENELEC 0 Modes and Failure Mechanisms for Passive Components 5133 EN 60034-18- Rotating Electrical Machines Part 18-22: Functional Evaluation of Insulation Systems - Test Procedures for Wire-Wound 2001 CENELEC 0 22 Windings - Classification of Changes and Insulation Component Substitutions 5134 EN 61643-21 Low voltage surge protective devices Part 21: Surge protective devices connected to telecommunications and signalling 2001 CENELEC 0 networks - Performance requirements and testing methods - Incorporates Amendment A2: 2013 5135 EN 50289-1-2 Communication Cables - Specifications for Test Methods Part 1-2: Electrical Test Methods - DC Resistance 2001 CENELEC 0 5136 EN 50182 Conductors for overhead lines - Round wire concentric lay stranded conductors - Incorporating corrigendum July 2013 2001 CENELEC 0 5137 ROBT-005 Information Concerning Plugs for Household Appliances Covered by CLC/TC 61 Used in the Various CENELEC 2001 CENELEC 0 Countries 5138 EN 50341-3 Overhead electrical lines exceeding AC 45 kV Part 3: Set of National Normative Aspects - Incorporating Corrigenda April 2001 CENELEC 0 2006, October 2006, February 2009, June 2010 and October 2010; Remains Current 5139 EN 61834-9 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 2001 CENELEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) Part 9: DVB Format 5140 EN 50289-1-5 Communication Cables - Specifications for Test Methods Part 1-5: Electrical Test Methods - Capacitance 2001 CENELEC 0 5141 EN 50065-4-1 Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148,5 kHz Part 4-1: Low Voltage 2001 CENELEC 0 Decoupling Filters - Generic Specification - Ratified European Text:01/08/2001 5142 EN 60934 Circuit-breakers for equipment (CBE) - Incorporates Amendment A2: 2013 2001 CENELEC 0 5143 EN 60322 Railway Applications - Electric Equipment for Rolling Stock - Rules for Power Resistors of Open Construction 2001 CENELEC 0 5144 EN 61834-7 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 2001 CENELEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) Part 7: EDTV2 Format 5145 EN 50289-3-2 Communication Cables - Specifications for Test Methods Part 3-2: Mechanical Test Methods - Tensile Strength and 2001 CENELEC 0 Elongation for Conductor 5146 EN 61828 Ultrasonics - Focusing Transducers - Definitions and Measurement Methods for the Transmitted Fields 2001 CENELEC 0 5147 EN 50289-4-6 Communication Cables - Specifications for Test Methods Part 4-6: Environmental Test Methods - Temperature Cycling 2001 CENELEC 0 5148 HD 245.3 S3 Letter Symbols to Be Used in Electrical Technology Part 3: Logarithmic Quantities and Units 2001 CENELEC 0 5149 EN 60747-5-2 Discrete Semiconductor Devices and Integrated Circuits - Part 5-2: Optoelectronic Devices - Essential Ratings and 2001 CENELEC 0 Characteristics - Incorporates Amendment A1: 2002; Remains Current 5150 EN 50065-4-2 Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Part 2001 CENELEC 0 4-2: Low voltage decoupling filters - Safety requirements - Incorporates Amendments A1: 2003 and A2: 2005 5151 EN 61478 Live Working - Ladders of Insulating Material - Incorporates Amendment A1: 2003 2001 CENELEC 0 5152 EN 50289-3-1 Communication Cables - Specifications for Test Methods Part 3-1: Mechanical Test Methods - General Requirements 2001 CENELEC 0 5153 EN 60034-5 Rotating Electrical Machines Part 5: Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines 2001 CENELEC 0 (IP Code) - Classification - Incorporates Amendment A1: 2007 5154 EN 61347-2-8 Lamp controlgear Part 2-8: Particular requirements for ballasts for fluorescent lamps - Incorporates Amendment A1: 2001; 2001 CENELEC 0 Incorporates Corrigenda July 2003, December 2010 and August 2012 5155 EN 61753-2-3 Fibre Optic Interconnecting Devices and Passive Components Performance Standard - Part 2-3: Non-Connectorised Single 2001 CENELEC 0 Mode 1xN and 2xN Non-Wavelength-Selective Branching Devices for Category U - Uncontrolled Environment 5156 EN 60512-1 Connectors for Electronic Equipment - Tests and Measures Part 1: General 2001 CENELEC 0 5157 EN 50289-3-6 Communication Cables - Specifications for Test Methods Part 3-6: Mechanical Test Methods - Impact Resistance of the 2001 CENELEC 0 Cable 5158 EN 50289-3-7 Communication Cables - Specification for Test Methods Part 3-7: Mechanical Test Methods - Abrasion Resistance of the 2001 CENELEC 0 Cable Sheath 5159 EN 60684-3- Flexible Insulating Sleeving Part 3: Specifications for Individual Types of Sleeving Sheets 100 to 105: Extruded PVC 2001 CENELEC 0 100 TO 105 Sleeving 5160 EN 61817 Household portable appliances for cooking, grilling and similar use - Methods for measuring performance - Incorporates 2001 CENELEC 0 Amendment A1: 2004 5161 EN 61691-2 Behavioural Languages Part 2: VHDL Multilogic System for Model Interoperability 2001 CENELEC 0 5162 EN 60317-0-6 Specifications for particular types of winding wires Part 0-6: General requirements Glass-fibre wound resin or varnish 2001 CENELEC 0 impregnated, bare or enamelled round copper wire - Incorporates Amendment A1: 2006 5163 EN 60146-2 Semiconductors convertors Part 2: Self-commutated semiconductor converters including direct d.c. converters 2000 CENELEC 0 5164 EN 61966-3 Multimedia Systems and Equipment - Colour Measurement and Management Part 3: Equipment Using Cathode Ray Tubes 2000 CENELEC 0 5165 EN 61000-3-11 Electromagnetic Compatibility (EMC) Part 3-11: Limits - Limitation of Voltage Changes, Voltage Fluctuations and Flicker 2000 CENELEC 0 in Public Low-Voltage Supply Systems - Equipment with Rated Current Greater than or Equal to 75 A and Subject to Conditional Connection 5166 EN 61338-1-3 Waveguide Type Dielectric Resonators - Part 1-3: General Information and Test Conditions - Measurement Method of 2000 CENELEC 0 Complex Relative Permittivity for Dielectric Resonator Materials at Microwave Frequency test conditions - Measurement Method of Complex Relati 5167 EN 60368-4 Piezoelectric Filters of Assessed Quality Part 4: Sectional Specification - Capability Approval 2000 CENELEC 0 5168 EN 60368-1 Piezoelectric filters of assessed quality Part 1: Generic specification - Incorporates Amendment A1: 2004 2000 CENELEC 0 5169 EN 61834-3 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 2000 CENELEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) Part 3: HD Format for 1125-60 and 1250-50 Systems 5170 EN 50090-8 Home and Building Electronic Systems (HBES) Part 8: Conformity Assessment of Products 2000 CENELEC 0 5171 EN 60534-3-1 Industrial-Process Control Valves Part 3-1: Dimensions - Face-To-Face Dimensions for Flanged, Two-Way, Globe-Type, 2000 CENELEC 0 Straight Pattern and Centre-To-Face Dimensions for Flanged, Two-Way, Globe-Type, Angle Pattern Control Valves - Incorporating Corrigendum Ju 5172 EN 61909 Audio Recording - Minidisc System 2000 CENELEC 0 5173 EN 60244-15 Methods of Measurement for Radio Transmitters - Part 15: Amplitude-Modulated Transmitters for Sound Broadcasting 2000 CENELEC 0 5174 EN 61076-7 Connectors for Use in d.c., Low-Frequency Analogue and Digital High Speed Data Applications Part 7: Cable Outlet 2000 CENELEC 0 Accessories with Assessed Quality, Including Qualification and Capability Approval - Sectional Specification 5175 EN 50183 Conductors for Overhead Lines Aluminium-Magnesium-Silicon Alloy Wires 2000 CENELEC 0 5176 EN 61966-2-1 Multimedia Systems and Equipment - Colour Measurement and Management Part 2-1: Colour Management - Default RGB 2000 CENELEC 0 Colour Space - sRGB - Incorporates Amendment A1: 2003 5177 EN 50303 Group I, Category M1 Equipment Intended to Remain Functional in Atmospheres Endangered by Firedamp and/or Coal 2000 CENELEC 0 Dust 5178 EN 61966-4 Multimedia Systems and Equipment - Colour Measurement and Management Part 4: Equipment Using Liquid Crystal 2000 CENELEC 0 Display Panels 5179 EN 60216-4-3 Electrical Insulating Materials - Thermal Endurance Properties Part 4-3: Ageing Ovens - Multi-Chamber Ovens 2000 CENELEC 0 5180 EN 60320-2-1 Appliance Couplers for Household and Similar General Purposes Part 2-1: Sewing Machine Couplers 2000 CENELEC 0 5181 EN 61334-4- Distribution Automation Using Distribution Line Carrier Systems Part 4-511: Data Communication Protocols - Systems 2000 CENELEC 0 511 Management - CIASE Protocol 5182 EN 60774-2 Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS - PART 2:FM Audio 2000 CENELEC 0 Recording 5183 EN 61904 Video Recording Helical-Scan Digital Component Video Cassette Recording Format Using 12,65 mm Magnetic Tape and 2000 CENELEC 0 Incorporating Data Compression (Format Digital-L) 5184 EN 61223-3-4 Evaluation and Routine Testing in Medical Imaging Departments Part 3-4: Acceptance Tests Imaging Performance of 2000 CENELEC 0 Dental X-Ray Equipment 5185 EN 60204-11 Safety of machinery - Electrical equipment of machines Part 11: Requirements for HV equipment for voltages above 1 000 2000 CENELEC 0 V a.c. or 1 500 V d.c. and not exceeding 36 kV - Incorporating corrigendum February 2010 5186 EN 61076-3- Connectors for use in d.c., low-frequency analogue and digital high speed data applications Part 3-100: Rectangular 2000 CENELEC 0 100 connectors with assessed quality Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable r 5187 EN 60843-4 Helical-Scan Video Tape Cassette System Using 8 mm Magnetic Tape (8 mm Video) Part 4: Video Subcode (VSC) 2000 CENELEC 0 5188 EN 61334-6 Distribution Automation Using Distribution Line Carrier Systems Part 6: A-XDR Encoding Rule 2000 CENELEC 0 5189 EN 60531 Household Electric Thermal Storage Room Heaters Methods for Measuring Performance 2000 CENELEC 0 5190 EN 61000-4-27 Electromagnetic compatibility (EMC) Part 4-27: Testing and measurement techniques - Unbalance, immunity test for 2000 CENELEC 0 equipment with input current not exceeding 16 A per phase - Incorporates Amendment A1: 2009 5191 EN 45510-2-4 Guide for Procurement of Power Station Equipment - Part 2-4: Electrical Equipment - High Power Static Convertors 2000 CENELEC 0 5192 EN 50189 Conductors for Overhead Lines Zinc Coated Steel Wires 2000 CENELEC 0 5193 EN 60044-7 Instrument Transformers - Part 7: Electronic Voltage Transformers - Remains Current 2000 CENELEC 0 5194 EN 61000-4-23 Electromagnetic Compatibility (EMC) Part 4-23: Testing and Measurement Techniques - Test Methods for Protective 2000 CENELEC 0 Devices for HEMP and Other Radiated Disturbances 5195 EN 60368-4-1 Piezoelectric Filters of Assessed Quality Part 4-1: Blank Detail Specification - Capability Approval 2000 CENELEC 0 5196 EN 61000-4-28 Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, 2000 CENELEC 0 immunity test for equipment with input current not exceeding 16 A per phase - Incorporates Amendment A2: 2009 5197 EN 60432-2 Incandescent Lamps - Safety Specifications Part 2: Tungsten Halogen Lamps for Domestic and Similar General Lighting 2000 CENELEC 0 Purposes - Incorporates Amendment A2: 2012 5198 EN 61000-4-29 Electromagnetic Compatibility (EMC) Part 4-29: Testing and Measurement Techniques - Voltage Dips, Short Interruptions 2000 CENELEC 0 and Voltage Variations on D.C. Input Power Port Immunity Tests 5199 EN 60216-4-2 Electrical Insulating Materials - Thermal Endurance Properties Part 4-2: Ageing Ovens - Precision Ovens for Use up to 300 2000 CENELEC 0 Degrees Celsius 5200 EN 61753-2-1 Fibre Optic Interconnecting Devices and Passive Components Performance Standard Part 2-1: Fibre Optic Connectors 2000 CENELEC 0 Terminated on Single-Mode Fibre For Category U - Uncontrolled Environment 5201 EN 60335-2-64 Safety of household and similar electrical appliances Part 2-64: Particular requirements for commercial electric kitchen 2000 CENELEC 0 machines - Incorporates Amendment A1: 2002 5202 EN 60999-1 Connecting Devices - Electrical Copper Conductors Safety Requirements for Screw-Type and Screwless-Type Clamping 2000 CENELEC 0 Units Part 1: General Requirements and Particular Requirements for Clamping Units for Conductors from 0,2 mm2 up to 35 mm2 (Included) 5203 EN 61094-1 Measurement Microphones Part 1: Specifications for Laboratory Standard Microphones 2000 CENELEC 0 5204 EN 61754-16 Fibre Optic Connector Interfaces Part 16: Type PN Connector Family 2000 CENELEC 0 5205 EN 60947-5-6 Low-Voltage Switchgear and Controlgear Part 5-6: Control Circuit Devices and Switching Elements DC Interface for 2000 CENELEC 0 Proximity Sensors and Switching Amplifiers (NAMUR) 5206 EN 61131-7 Programmable Controllers Part 7: Fuzzy Control Programming 2000 CENELEC 0 5207 EN 60191-6-3 Mechanical Standardization of Semiconductor Devices - Part 6-3: General Rules for the Preparation of Outline Drawings of 2000 CENELEC 0 Surface Mounted Semiconductor Device Packages - Measuring Methods for Package Dimensions of Quad Flat Packs (QFP) 5208 EN 60264-3-1 Packaging of winding wires Part 3-1: Taper barrelled delivery spools Basic dimensions - Incorporates Amendment A1: 2000 CENELEC 0 2003 5209 HD 627 S1/A1 Multicore and Multipair Cable for Installation Above and Below Ground 2000 CENELEC 0 5210 EN 61300-3-36 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-36: 2000 CENELEC 0 Examinations and Measurements - Measurement Methods for the Inside and Outside Diameters of Fibre Optic Connector Ferrules 5211 EN 50320 Digital Audio Broadcasting System - Specification of the DAB Command Set for Receivers (DCSR) 2000 CENELEC 0 5212 EN 60580 Medical Electrical Equipment Dose Area Product Meters 2000 CENELEC 0 5213 EN 61926-1 Design Automation - Part 1: Standard Test Language for All Systems - Common Abbreviated Test Language for All 2000 CENELEC 0 Systems (C/ATLAS) 5214 EN 60672-2 Ceramic and Glass Insulating Materials Part 2: Methods of Test 2000 CENELEC 0 5215 EN 61683 Photovoltaic Systems - Power Conditioners - Procedure for Measuring Efficiency 2000 CENELEC 0 5216 EN 60432-1 Incandescent lamps - Safety specifications Part 1: Tungsten filament lamps for domestic and similar general lighting 2000 CENELEC 0 purposes - Incorporates Amendment A2: 2012 5217 EN 61300-2-40 Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures Part 2-40: Tests - 2000 CENELEC 0 Screen Testing of Attenuation of Single-Mode Tuned Angles Optical Connectors 5218 EN 60512-20-2 Electromechanical Components for Electronic Equipment Basic Testing Procedures and Measuring Methods Part 20-2: 2000 CENELEC 0 Test 20b - Flammability Tests - Fireproofness 5219 EN 61834-6 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 2000 CENELEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) Part 6: SDL Format 5220 EN 60244-1 Methods of Measurement for Radio Transmitters Part 1: General Characteristics for Broadcast Transmitters 2000 CENELEC 0 5221 EN 61195 Double-capped fluorescent lamps - Safety specifications - Incorporates Amendment A2: 2015 1999 CENELEC 0 5222 EN 61595-3 Multichannel Digital Audio Tape Recorder (DATR), Reel-To-Reel System, for Professional Use Part 3: 24-Bit Operation 1999 CENELEC 0 for 16-Bit Media 5223 HD 22.11 AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 11: EVA Cords and Flexible 1999 CENELEC 0 S1/A1 Cables 5224 EN 60068-2-74 Environmental Testing Part 2: Tests - Test Xc: Fluid Contamination - Incorporates Amendment A1: 2018 1999 CENELEC 0 5225 EN 50285 Energy Efficiency of Electric Lamps for Household Use - Measurement Methods 1999 CENELEC 0 5226 EN 61599 Videodisk Players - Methods of Measurement 1999 CENELEC 0 5227 R217-016 Pinnacles Component Information Standard 1.2 PCIS Sample Documents 1999 CENELEC 0 5228 HD 22.3 S3/A1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Heat Resistant Silicone Rubber Insulated 1999 CENELEC 0 Cables 5229 EN 60704-2-11 Household and Similar Electrical Appliances - Test Code for the Determination of Airborne Acoustical Noise - Part 2-11: 1999 CENELEC 0 Particular Requirements for Electrically Operated Food Preparation Appliances 5230 EN 60068-5-2 Environmental Testing Part 5: Guide to Drafting of Test Methods Terms and Definitions 1999 CENELEC 0 5231 EN 61868 Mineral insulating oils Determination of kinematic viscosity at very low temperatures 1999 CENELEC 0 5232 EN 60130-17 Connectors for Frequencies Below 3 MHz - Part 17: Detail Specification for Interconnection Devices Which Permit Multi- 1999 CENELEC 0 Directional Mating, For Use with Rechargeable Batteries 5233 EN 60264-3-2 Packaging of Winding Wires Part 3-2: Taper Barrelled Delivery Spools - Specification for Returnable Spools Made from 1999 CENELEC 0 Thermoplastic Materials 5234 EN 61249-3-5 Materials for Printed Boards and Other Interconnecting Structures - Part 3-5: Sectional Specification Set for Unreinforced 1999 CENELEC 0 Base Materials, Clad and Unclad (Intended for Flexible Printed Boards) - Transfer Adhesive Films for Flexible Printed Boards 5235 EN 61223-3-1 Evaluation and Routine Testing in Medical Imaging Departments - Part 3-1: Acceptance Tests - Imaging Performance of 1999 CENELEC 0 X-Ray Equipment for Radiographic and Radioscopic Systems 5236 HD 628 S1 AMD prA1 Test Methods for Accessories for Power Cables with Rated Voltage from 3,6/6 kV (Um = 7,2kV) up to and 1999 CENELEC 0 Including 20,8/36kV (Um = 42kV) 5237 EN 60512-6-5 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods Part 6: 1999 CENELEC 0 Dynamic Stress Tests Section 5: Test 6e: Random Vibration 5238 EN 60603-14 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 14: Detail Specification for Circular 1999 CENELEC 0 Connectors for Low-Frequency Audio and Video Applications Such as Audio, Video and Audio-Visual Equipment 5239 EN 61702 Rating of Direct Coupled Photovoltaic (PV) Pumping Systems 1999 CENELEC 0 5240 EN 61993-1 Maritime Navigation and Radiocommunication Equipment and Systems Part 1: Shipborne Automatic Transponder System 1999 CENELEC 0 Installation Using VHF Digital Selective Calling (DSC) Techniques Operational and Performance Requirements, Methods of Testing and Required Tes 5241 EN 61249-3-4 Materials for Printed Boards and Other Interconnecting Structures Part 3-4: Sectional Specification Set for Unreinforced 1999 CENELEC 0 Base Materials, Clad and Unclad (Intended for Flexible Printed Boards) - Adhesive Coated Flexible Polyimide Film 5242 EN 50286 Electrical Insulating Protective Clothing for Low-Voltage Installations 1999 CENELEC 0 5243 EN 61943 Integrated Circuits - Manufacturing Line Approval Application Guideline 1999 CENELEC 0 5244 EN 60938-1 Fixed inductors for electromagnetic interference suppression Part 1: Generic specification - Incorporates Amendment A1: 1999 CENELEC 0 2007 5245 EN 61000-4-17 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port 1999 CENELEC 0 immunity test - Incorporates Amendment A2: 2009 5246 EN 60309-1 Plugs, Socket-Outlets and Couplers for Industrial Purposes Part 1: General Requirements - Incorporates Amendment A2: 1999 CENELEC 0 2012 5247 EN 61620 Insulating liquids Determination of the dielectric dissipation factor by measurement of the conductance and capacitance 1999 CENELEC 0 Test method 5248 EN 60938-2-2 Fixed Inductors for Electromagnetic Interference Suppression Part 2-2: Blank Detail Specification Inductors for Which 1999 CENELEC 0 Safety Tests Are Required (Only) 5249 EN 61076-4- Connectors for Use in d.c. Low-Frequency Analogue and Digital High Speed Data Applications Part 4-103: Printed Board 1999 CENELEC 0 103 Connectors with Assesed Quality - Detail Specification for Two-Part Connectors with Shielding and a Basic Grid of 2,5 mm 5250 EN 60193 Hydraulic turbines, storage pumps and pump-turbines Model acceptance tests 1999 CENELEC 0 5251 EN 60908 Audio Recording - Compact Disc Digital Audio System 1999 CENELEC 0 5252 EN 61249-3-3 Materials for Printed Boards and Other Interconnecting Structures Part 3-3: Sectional Specification Set for Unreinforced 1999 CENELEC 0 Base Materials, Clad and Unclad (Intended for Flexible Printed Boards) Adhesive Coated Flexible Polyester Film 5253 EN 166101 Blank Detail Specification: Surface Acoustic Wave (SAW) filters - Capability approval 1999 CENELEC 0 5254 EN 61169-31 Radio-Frequency Connectors - Part 31: RF Coaxial Connectors with Inner Diameter of Outer Conductor 1,0 mm (0,039 in) 1999 CENELEC 0 with Screw Coupling - Characterisyic Impedance - 50 ohms (Type 1,0) 5255 EN 60059 IEC standard current ratings - Incorporates Amendment A1: 2009 1999 CENELEC 0 5256 EN 61747-1 Liquid Crystal and Solid-State Display Devices - Part 1: Generic Specification - Incorporates Amendment A1: 2003 1999 CENELEC 0 5257 EN 61609 Microwave Ferrite Components Guide for the Drafting of Specifications 1999 CENELEC 0 5258 EN 61249-2-13 Materials for Printed Boards and Other Interconnecting Structures - Part 2-13: Sectional Specification Set for Reinforced 1999 CENELEC 0 Base Materials, Clad and Unclad - Cyanate Ester Non-Woven Aramid Laminate of Defined Flammability, Copper-Clad 5259 EN 60660 Insulators Tests on Indoor Post Insulators of Organic Material for Systems with Nominal Voltages Greater Than 1 kV up to 1999 CENELEC 0 but Not Including 300 kV 5260 EN 61300-2-45 Fibre Optic Interconnection Devices and Passive Components Basic Test and Measurement Procedures Part 2-45: Tests - 1999 CENELEC 0 Durability Test by Water Immersion 5261 EN 60938-2-1 Fixed Inductors for Electromagnetic Interference Suppression Part 2-1: Blank Detail Specification Inductors for Which 1999 CENELEC 0 Safety Tests Are Required - Assessment Level D 5262 EN 61249-2-12 Materials for Printed Boards and Other Interconnecting Structures Part 2-12: Sectional Specification Set for Reinforced 1999 CENELEC 0 Base Materials, Clad and Unclad - Epoxide Non-Woven Aramid Laminate of Defined Flammability, Copper-Clad 5263 EN 60315-3 Methods of Measurement on Radio Receivers for Various Classes of Emission Part 3: Receivers for Amplitude-Modulated 1999 CENELEC 0 Sound-Broadcasting Emissions - Incorporates Amendment A1: 1999 5264 HD 22.10 AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 10: EPR Insulated and 1999 CENELEC 0 S1/A1 Polyurethane Sheathed Flexible Cable 5265 EN 61000-4-14 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test 1999 CENELEC 0 for equipment with input current not exceeding 16 A per phase - Incorporates Amendment A2: 2009 5266 EN 60068-2-11 Environmental Testing - Part 2: Tests - Test Ka: Salt Mist 1999 CENELEC 0 5267 EN 61209 Maritime Navigation and Radiocommunication Equipment and Systems - Integrated Bridge Systems (IBS) - Operational 1999 CENELEC 0 and Performance Requirements, Methods of Testing and Required Test Results 5268 EN 186300 Sectional Specifications: Connector Sets for Optical Fibres and Cables Type MSC 1999 CENELEC 0 5269 EN 60609-2 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines Part 2: Evaluation in Pelton turbines 1999 CENELEC 0 5270 EN 60068-2-77 Environmental Testing Part 2-77: Tests - Test 77: Body Strength and Impact Shock 1999 CENELEC 0 5271 EN 60068-2-13 Environmental Testing - Part 2: Tests - Test M: Low Air Pressure 1999 CENELEC 0 5272 HD 22.9 S2/A1 AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 9: Single Core Non-Sheathed 1999 CENELEC 0 Cables for Fixed Wiring Having Low Emission of Smoke and Corrosive Gases 5273 EN 60068-2-41 Environmental Testing Part 2: Tests - Test Z/BM: Combined Dry Heat/Low Air Pressure Tests 1999 CENELEC 0 5274 EN 61114-1 Receiving Antennas for Satellite Broadcast Transmissions in the 11/12 GHz Band - Part 1: Electrical Measurements 1999 CENELEC 0 5275 EN 45510-2-2 Guide for Procurement of Power Station Equipment - Part 2-2: Electrical Equipment - Uninterruptible Power Supplies 1999 CENELEC 0 5276 EN 60633 Terminology for high-voltage direct current (HVDC) transmission - Incorporates Amendment A2: 2015 1999 CENELEC 0 5277 EN 61000-2-10 Electromagnetic Compatibility (EMC) Part 2-10: Environment - Description of HEMP Environment - Conducted 1999 CENELEC 0 Disturbance 5278 EN 61512-1 Batch Control - Part 1: Models and Terminology 1999 CENELEC 0 5279 EN 60068-2-48 Environmental Testing Part 2: Tests - Guidance on the Application of the Tests of IEC 60068 to Simulate the Effects of 1999 CENELEC 0 Storage 5280 EN 61754-12 Fibre Optic Connector Interfaces Part 12: Type FS Connector Family 1999 CENELEC 0 5281 EN 60966-1 Radio Frequency and Coaxial Cable Assemblies - Part 1: Generic Specification - General Requirements and Test Methods 1999 CENELEC 0 5282 EN 60309-2 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and 1999 CENELEC 0 contact-tube accessories - Incorporates Amendment A2: 2012 5283 EN 175201-804 Detail Specification: Circular Connectors - Round Contacts, Size Diameter 1,6 mm, Threaded Coupling 1999 CENELEC 0 5284 EN 61076-4- Connectors for Use in d.c. Low-Frequency Analogue and Digital High-Speed Data Applications - Part 4-104: Printed 1999 CENELEC 0 104 Board Connectors with Assessed Quality - Detail Specification for Two-Part Modular Connectors, Basic Grid of 2,0 mm, with Terminations on a Mu 5285 EN 61747-2 Liquid crystal and solid-state display devices Part 2: Liquid crystal display modules Sectional specification 1999 CENELEC 0 5286 EN 60834-1 Teleprotection Equipment of Power Systems Performance and Testing Part 1: Command Systems 1999 CENELEC 0 5287 EN 60938-2 Fixed Inductors for Electromagnetic Interference Suppression Part 2: Sectional Specification - Incorporates Amendment 1999 CENELEC 0 A1: 2007 5288 EN 60522 Determination of the Permanent Filtration of X-Ray Tube Assemblies 1999 CENELEC 0 5289 EN 61300-3-17 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-17: 1999 CENELEC 0 Examinations and Measurements Endface Angle of Angle-Polished Ferrules 5290 EN 60684-3- Flexible Insulating Sleeving Part 3: Specifications for Individual Types of Sleeving Sheet 409: Glass Textile Sleeving with 1999 CENELEC 0 409 Polyurethane (PUR)-Based Coating 5291 HD 22.14 AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 14: Cords for Applications 1999 CENELEC 0 S1/A1 Requiring High Flexibility 5292 EN 60068-3-2 Environmental Testing - Part 3: Background Information Section 2: Combined Temperature/Low Air Pressure Tests 1999 CENELEC 0 5293 EN 60368-2-2 Piezoelectric Filters - Part 2: Guide to the Use of Piezoelectric Filters - Section 2: Piezoelectric Ceramic Filters 1999 CENELEC 0 5294 EN 175101-802 Detail Specification: Two-Part Connectors for Printed Boards for High Number of Contracts with Basic Grid of 2,54 mm 1999 CENELEC 0 on 3 or 4 Rows 5295 EN 60512-11-1 Electromechanical Components for Electronic Equipment Basic Testing Procedures and Measuring Methods Part 11: 1999 CENELEC 0 Climatic Tests Section 1: Test 11a - Climatic Sequence 5296 EN 61628-2 Corrugated pressboard and presspaper for electrical purposes Part 2: Methods of test - Incorporates Amendment A1: 2007 1999 CENELEC 0 5297 HD 22.4 S3/A1 AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 4: Cords and Flexible Cables 1999 CENELEC 0 5298 EN 61803 Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters - 1999 CENELEC 0 Incorporating Corrigendum October 1999; Incorporates Amendment A1: 2010; Incorporates Amendment A2: 2016 5299 HD 22.12 AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 12: Heat Resistant EPR Cords and 1999 CENELEC 0 S1/A1 Flexible Cables 5300 R086-001 Guidance for Technology Audit of Fibre Optic Connector Kits and Terminated Connectors 1999 CENELEC 0 5301 EN 60068-2-40 Environmental Testing Part 2: Tests - Test Z/AM: Combined Cold/Low Air Pressure Tests 1999 CENELEC 0 5302 EN 61964 Integrated Circuits - Memory Devices Pin Configurations 1999 CENELEC 0 5303 EN 60264-3-4 Packaging of Winding Wires Part 3-4: Taper Barrelled Delivery Spools - Basic Dimensions of Containers for Taper 1999 CENELEC 0 Barrelled Delivery Spools 5304 EN 62005-4 Reliability of Fibre Optic Interconnecting Devices and Passive Optical Components Part 4: Product Screening 1999 CENELEC 0 5305 EN 60264-3-5 Packaging of Winding Wires Part 3-5: Taper Barrelled Delivery Spools - Specification for Spool Containers Made from 1999 CENELEC 0 Thermoplastic Material 5306 EN 62019 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units - Incorporates 1999 CENELEC 0 Amendments A12: 2014 5307 EN 60191-3 Mechanical Standardization of Semiconductor Devices Part 3: General Rules for the Preparation of Outline Drawings of 1999 CENELEC 0 Integrated Circuits 5308 EN 60512-11-8 Electromechanical components for electronic equipment Basic testing procedures and measuring methods Part 11: Climatic 1999 CENELEC 0 tests Section 8: Test 11h - Sand and dust 5309 EN 61316 Industrial Cable Reels 1999 CENELEC 0 5310 EN 61169-32 Radio-Frequency Connectors - Part 32: RF Coaxial Connectors with Inner Diameter of Outer Conductor 1,85 mm (0,072 1999 CENELEC 0 in) with Screw Coupling - Characteristic Impedance 50 ohms (Type 1,85) 5311 EN 60674-3-2 Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Requirements 1998 CENELEC 0 for Balanced Biaxially Oriented Polyethylene Terephthalate (PET) Films Used for Electrical Insulation 5312 EN 60674-3-3 Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 3: Requirements 1998 CENELEC 0 for Polycarbonate (PC) Films Used for Electrical Insulation 5313 EN 60110-1 Power Capacitors for Induction Heating Installations Part 1: General 1998 CENELEC 0 5314 EN 50256 Characteristics of DVB Receivers 1998 CENELEC 0 5315 EN 50157-2-3 Domestic and Similar Electronic Equipment Interconnection Requirements: AV Link - Part 2-3: System Oriented 1998 CENELEC 0 Application 5316 EN 61854 Overhead Lines - Requirements and Tests for Spacers 1998 CENELEC 0 5317 EN 61300-3-40 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-40: 1998 CENELEC 0 Examinations and Measurements Extinction Ratio of a Polarization Maintaining (pm) Fibre Pigtailed Connector 5318 EN 61834-5 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 1998 CENELEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) Part 5: The Character Information System 5319 EN 60320-2-2 Appliance Couplers for Household and Similar General Purposes Part 2-2: Interconnection Couplers for Household and 1998 CENELEC 0 Similar Equipment 5320 EN 60947-5-5 Low-voltage switchgear and controlgear Part 5-5: Control circuit devices and switching elements Electrical emergency stop 1998 CENELEC 0 device with mechanical latching function - Incorporates Amendment A2: 2017 5321 EN 61196-3 Radio Frequency Cables Part 3: Sectional Specification for Coaxial Cables for Local Area Networks 1998 CENELEC 0 5322 EN 61061-3-1 Non-Impregnated Densified Laminated Wood for Electrical Purposes Part 3: Specifications for Individual Materials Sheets 1998 CENELEC 0 1: Sheets Produced from Beech Veneer 5323 EN 60601-2-40 Medical Electrical Equipment Part 2-40: Particular Requirements for the Safety of Electromyographs and Evoked Response 1998 CENELEC 0 Equipment 5324 EN 61835 Helical-Scan Digital Component Video Cassette Recording System Using 12,65 mm (0,5 in) Magnetic Tape - Format D-5 1998 CENELEC 0 5325 EN 60684-3- Flexible Insulating Sleeving Part 3: Specifications for Individual Types of Sleeving Sheet 151: Extruded PVC/Nitrile 1998 CENELEC 0 151 Rubber - General Purpose 5326 EN 60454-3-1 Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: PVC 1998 CENELEC 0 Film Tapes with Pressure-Sensitive Adhesive - Incorporates Amendment A1: 2001 5327 EN 61595-2 Multichannel Digital Audio Tape Recorder (DATR), Reel-To-Reel System, for Professional Use Part 2: Format B 1998 CENELEC 0 5328 EN 61846 Ultrasonics - Pressure Pulse Lithotripters - Characteristics of Fields 1998 CENELEC 0 5329 EN 61108-2 Maritime Navigation and Radiocommunication Equipment and Systems Global Navigation Satellite Systems (GNSS) Part 1998 CENELEC 0 2: Global Navigation Satellite System (GLONASS) Receiver Equipment Performance Standards, Methods of Testing and Required Test Results 5330 EN 130201 Blank Detail Specification: Fixed Tantalum Capacitors with Solid Electrolyte, Porous Anode - SUB-FAMILY 3; 1998 CENELEC 0 Incorporates Amendment A2: 1998 5331 EN 60320-2-3 Appliance Coupler for Household and Similar General Purposes Part 2-3: Appliance Coupler with a Degree of Protection 1998 CENELEC 0 Higher Than IPX0 - Incorporates Amendment A1: 2005 5332 EN 61162-2 Maritime Navigation and Radiocommunication Equipment and Systems Digital Interfaces Part 2: Single Talker and 1998 CENELEC 0 Multiple Listeners, High-Speed Transmission 5333 EN 50098-1 Customer Premises Cabling for Information Technology - Part 1: ISDN Basic Access - Incorporates Amendment A1: 2002; 1998 CENELEC 0 Incorporating Corrigendum January 2003 5334 EN 61076-4- Connectors with Assessed Quality, for Use in d.c., Low Frequency Analogue and in Digital High-Speed Data Applications 1998 CENELEC 0 105 Part 4: Printed Board Connectors Section 105: Detail Specification for 9 mm Circular Connector with 3 to 8 Contacts for Use in a Wide Ran 5335 EN 61834-1 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 1998 CENELEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) - Part 1: General Specifications - Incorporates Amendment A1: 2001 5336 EN 60603-12 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 12: Detail Specification for Dimensions, 1998 CENELEC 0 General Requirements and Tests for a Range of Sockets Designed for Use with Integrated Circuits 5337 EN 60433 Insulators for Overhead Lines with a Nominal Voltage Above 1 kv Ceramic Insulators for a.c. Systems Characteristics of 1998 CENELEC 0 Insulator Units of the Long Rod Type 5338 EN 60679-5 Quartz Crystal Controlled Oscillators of Assessed Quality Part 5: Sectional Specification - Qualification Approval 1998 CENELEC 0 5339 EN 60674-3-1 Plastic films for electrical purposes Part 3: Specifications for individual materials Sheet 1: Biaxially oriented polypropylene 1998 CENELEC 0 (PP) film for capacitors - Incorporates Amendment A1: 2011 5340 EN 61280-2-4 Fibre Optic Communication Subsystem Basic Test Procedures - Part 2.4: Test Procedures for Digital Systems Bit-Rate 1998 CENELEC 0 Tolerance Measurement 5341 EN 60454-3-6 Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 6: 1998 CENELEC 0 Polycarbonate Film Tapes with Acrylic Thermoplastic Adhesive 5342 EN 61395 Overhead Electrical Conductors Creep Test Procedures for Stranded Conductors 1998 CENELEC 0 5343 EN 61897 Overhead Lines - Requirements and Tests for Stockbridge Type Aeolian Vibration Dampers 1998 CENELEC 0 5344 EN 61834-4 Recording Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 1998 CENELEC 0 625-50, 1125-60 and 1250-50 systems) Part 4: Pack header table and contents - Incorporates Amendment A1: 2011 5345 HD 384.5.52 AMD 1 Electrical Installations of Buildings Part 5: Selection and Erection of Electrical Equipment Chapter 52: Wiring 1998 CENELEC 0 S1/A1 Systems - Incorporating Corrigendum September 1998 5346 EN 60315-4 Methods of Measurement on Radio Receivers for Various Classes of Emission Part 4: Receivers for Frequency-Modulated 1998 CENELEC 0 Sound Broadcasting Emissions 5347 EN 61188-1-2 Printed Boards and Printed Board Assemblies - Design and Use Part 1-2: Generic Requirements - Controlled Impedance 1998 CENELEC 0 5348 EN 60404-2 Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means 1998 CENELEC 0 of an Epstein frame - Incorporates Amendment A1: 2008 5349 EN 60603-5 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 5: Edge-Socket Connectors and Two-Part 1998 CENELEC 0 Connectors for Double-Sided Printed Boards with 2,54 mm (0,1 in) Spacing 5350 EN 60679-5-1 Quartz Crystal Controlled Oscillators of Assessed Quality Part 5-1: Blank Detail Specification - Qualification Approval 1998 CENELEC 0 5351 EN 60503 Spools for Broadcast Videotape Recorders (VTRS) 1998 CENELEC 0 5352 EN 160101 Blank Detail Specification: Printed Board Assembly Modular Electronic Units of Assessed Quality Capability Approval 1998 CENELEC 0 5353 EN 61953 Diagnostic X-Ray Imaging Equipment Characteristics of Mammographic Anti-Scatter Grids 1998 CENELEC 0 5354 EN 60455-1 Resin Based Reactive Compounds Used for Electrical Insulation Part 1: Definitions and General Requirements 1998 CENELEC 0 5355 EN 60917-1 Modular Order for the Development of Mechanical Structures for Electronic Equipment Practices - Part 1: Generic 1998 CENELEC 0 Standard - Incorporates Amendment A1: 2000 5356 EN 61032 Protection of Persons and Equipment by Enclosures - Probes for Verification 1998 CENELEC 0 5357 EN 61280-1-1 Fibre Optic Communication Subsystem Basic Test Procedures Part 1-1: Test Procedures for General Communication 1998 CENELEC 0 Subsystems Transmitter Output Optical Power Measurement for Single-Mode Optical Fibre Cable 5358 EN 60875-1-1 Fibre Optic Branching Devices Part 1-1: Blank Detail Specification 1998 CENELEC 0 5359 EN 61751 Laser Modules Used for Telecommunication Reliability Assessment 1998 CENELEC 0 5360 EN 60603-4 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 4: Two-Part Connectors for Printed Boards 1998 CENELEC 0 Having Contacts Spaced at 1,91 mm (0,075 in) Centres and Staggered Terminations at that Same Spacing 5361 EN 153000 Generic Specification: Discrete Pressure Contact Power Semiconductor Devices (Qualification Approval) 1998 CENELEC 0 5362 EN 61847 Ultrasonics - Surgical Systems Measurement and Declaration of the Basic Output Characteristics 1998 CENELEC 0 5363 EN 60603-13 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 13: Detail Specification for Two-Part 1998 CENELEC 0 Connectors of Assessed Quality, for Printed Boards for Basic Grid of 2,54 mm (0,1 in) with Free Connectors for Non- Accessible Insulation Displace 5364 EN 50186-2 Live-Line Washing Systems for Power Installations with Nominal Voltages Above 1kV Part 2: National Annexes 1998 CENELEC 0 5365 EN 60118-14 Hearing Aids Part 14: Specification of a Digital Interface Device 1998 CENELEC 0 5366 EN 61830 Microwave Ferrite Components Measuring Methods for Major Properties 1998 CENELEC 0 5367 EN 60534-3-3 Industrial-Process Control Valves Part 3-3: Dimensions - End-to-End Dimensions for Buttweld, Two-Way, Globe-Type, 1998 CENELEC 0 Straight Pattern Control Valves 5368 EN 166100 Sectional Specification: Surface Acoustic Wave (SAW) Filters 1998 CENELEC 0 5369 EN 61300-3-23 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-23: 1998 CENELEC 0 Examination and Measurements Fibre Position Relative to Ferrule Endface 5370 EN 50281-2-1 Electrical Apparatus for Use in the Presence of Combustible Dust - Part 2-1: Test Methods - Methods of Determining 1998 CENELEC 0 Minimum Ignition Temperatures 5371 EN 60442 Electric toasters for household and similar purposes - methods for measuring the performance - Incorporates Amendment 1998 CENELEC 0 A1: 2003 5372 EN 196403 Blank Detail Specification: Push Button Switches Assessment Level Y 1998 CENELEC 0 5373 EN 60360 Standard Method of Measurement of Lamp Cap Temperature Rise 1998 CENELEC 0 5374 EN 60603-8 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 8: Two-Part Connectors for Printed Boards, for 1998 CENELEC 0 Basic Grid of 2,54 mm (0,1 in), with Square Male Contacts of 0,63 mm X 0,63 mm 5375 EN 60454-3-7 Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 7: 1998 CENELEC 0 Polyimide Film Tapes with Pressure-Sensitive Adhesive 5376 EN 61800-1 Adjustable Speed Electrical Power Drive Systems Part 1: General Requirements Rating Specifications for Low Voltage 1998 CENELEC 0 Adjustable Speed D.C. Power Drive Systems 5377 EN 50186-1 CORR Live-Line Washing Systems for Power Installations with Nominal Voltages Above 1kV Part 1: Common 1998 CENELEC 0 Requirements - Incorporating Corrigendum January 1999 5378 EN 62053-61 Electricity Metering Equipment (a.c.) Particular Requirements Part 61: Power Consumption and Voltage Requirements 1998 CENELEC 0 5379 EN 61305-2 Household High-Fidelity Audio Equipment and Systems Methods of Measuring and Specifying the Performance Part 2: 1998 CENELEC 0 FM Radio Tuners 5380 EN 61234-2 Electrical Insulating Materials Methods of Test for Hydrolytic Stability Part 2: Moulded Thermosets 1998 CENELEC 0 5381 EN 60603-10 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 10: Two-Part Connectors for Printed Boards 1998 CENELEC 0 for Basic Grid of 2,54 mm (0,1 in), Inverted Type 5382 EN 60630 Maximum lamp outliners for incandescent lamps - Incorporates Amendment A7: 2015 1998 CENELEC 0 5383 EN 60679-4 Quartz Crystal Controlled Oscillators of Assessed Quality Part 4: Sectional Specification - Capability Approval 1998 CENELEC 0 5384 EN 60081 Double-capped fluorescent lamps - Performance specifications - Incorporates Amendment A6: 2017 1998 CENELEC 0 5385 EN 61012 Filters for the Measurement of Audible Sound in the Presence of Ultrasound 1998 CENELEC 0 5386 EN 130202 Blank Detail Specification: Fixed Tantalum Capacitors with Non-Solid Electrolyte, Porous Anode (Sub-Family 2) 1998 CENELEC 0 5387 EN 61300-2-41 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-41: Tests - 1998 CENELEC 0 Screen Testing of Attenuation of Single-Mode Tuned Non-Angled Optical Fibre Connectors 5388 EN 60512-14-7 Electromechanical Components for Electronic Equipment Basic Testing Procedures and Measuring Methods Part 14: 1998 CENELEC 0 Sealing Tests Section 7: Test 14g: Impacting Water 5389 EN 60870-5- Telecontrol Equipment and Systems Part 5-103: Transmission Protocols Companion Standard for the Informative Interface 1998 CENELEC 0 103 of Protection Equipment 5390 EN 60603-2 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 2: Detail Specification for Two-Part 1998 CENELEC 0 Connectors with Assessed Quality, for Printed Boards, for Basic Grid of 2,54 mm (0,1 in) with Common Mounting Features - Incorporates Amendment A1 5391 EN 61334-4-61 Distribution Automation Using Distribution Line Carrier Systems Part 4-61: Data Communication Protocols - Network 1998 CENELEC 0 Layer Connectionless Protocol 5392 EN 50157-2-2 Domestic and Similar Electronic Equipment Interconnection Requirements: AV.Link Part 2-2: Basic System Oriented 1998 CENELEC 0 Commands 5393 EN 61603-3 Transmission of Audio and/or Video and Related Signals Using Infra-Red Radiation Part 3: Transmission Systems for 1998 CENELEC 0 Audio Signals for Conference and Similar Systems - Remains Current 5394 EN 62020 Electrical Accessories Residual Current Monitors for Household and Similar Uses (RCMs) - Incorporates Amendment A1: 1998 CENELEC 0 2005 5395 EN 61580-4 Methods of Measurement for Waveguides Part 4: Attenuation of Waveguide and Waveguide Assemblies 1998 CENELEC 0 5396 EN 50262 Cable glands for electrical installations - Incorporates Amendments A1: 2001 and A2: 2004 1998 CENELEC 0 5397 EN 61834-2 Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use 1998 CENELEC 0 (525-60, 625-50, 1125-60 and 1250-50 Systems) Part 2: SD Format for 525-60 and 625-50 Systems 5398 EN 60674-3-7 Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 7: Requirements 1998 CENELEC 0 for Fluoroethylene-Propylene (FEP) Films Used for Electrical Insulation 5399 EN 61290-6-1 Optical Fibre Amplifiers - Basic Specification Part 6-1: Test Methods for Pump Leakage Parameters Optical Demultiplexer 1998 CENELEC 0 5400 EN 50157-2-1 Domestic and Similar Electronic Equipment Interconnection Requirements: AV.Link - Part 2-1: Signal Quality Matching 1998 CENELEC 0 and Automatic Selection of Source Devices 5401 EN 61333 Marking on U and E Ferrite Cores 1998 CENELEC 0 5402 EN 60799 Electrical Accessories Cord Sets and Interconnection Cord Sets 1998 CENELEC 0 5403 EN 61334-4-33 Distribution Automation Using Distribution Line Carrier Systems Part 4-33: Data Communication Protocols Data Link 1998 CENELEC 0 Layer - Connection Oriented Protocol 5404 EN 50157-1 Domestic and Similar Electronic Equipment Interconnection Requirements: AV.Link - Part 1: General 1998 CENELEC 0 5405 EN 60603-9 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 9: Two-Part Connectors for Printed Boards, 1998 CENELEC 0 Backpanels and Cable Connectors, Basic Grid of 2,54 mm (0,1 in) 5406 EN 61675-1 Radionuclide imaging devices Characteristics and test conditions Part 1: Positron emission tomographs - Incorporates 1998 CENELEC 0 Amendment A1: 2008 5407 EN 60870-6- Telecontrol Equipment and Systems Part 6-701: Telecontrol Protocols Compatible with ISO Standards and ITU-T 1998 CENELEC 0 701 Recommendations Functional Profile for Providing the TASE.1 Application Service in End Systems 5408 EN 60704-2-7 Household and Similar Electrical Appliances Test Code for the Determination of Airborne Acoustical Noise Part 2: 1998 CENELEC 0 Particular Requirements for Fans 5409 HD 384.5.537 Electrical Installations of Buildings Part 5: Selection and Erection of Electrical Equipment Chapter 53: Switchgear and 1998 CENELEC 0 S2 Controlgear Section 537: Devices for Isolation and Switching 5410 EN 60674-1 Specification for Plastic Films for Electrical Purposes Part 1: Definitions and General Requirements 1998 CENELEC 0 5411 EN 50209 Test of Insulation of Bars and Coils of High-Voltage Machines 1998 CENELEC 0 5412 EN 61466-2 Composite string insulator units for overhead lines with a nominal voltage greater than 1 kV Part 2: Dimensional and 1998 CENELEC 0 electrical characteristics - Incorporates Amendment A2: 2018 5413 EN 60603-3 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 3: Two-Part Connectors for Printed Boards 1998 CENELEC 0 Having Contacts Spaced at 2,54 mm (0,1 in) Centres and Staggered Terminations at that Same Spacing 5414 EN 60603-1 Connectors for Frequencies Below 3 MHz for Use with Printed Boards - Part 1: Generic Specification - General 1998 CENELEC 0 Requirements and Guide for the Preparation of Detail Specifications, with Assessed Quality 5415 EN 61146-4 Video cameras (PAL/SECAM/NTSC) - Methods of measurement Part 4: Automatic functions of video cameras and 1998 CENELEC 0 camera-recorders 5416 EN 61345 UV Test for Photovoltaic (PV) Modules 1998 CENELEC 0 5417 EN 60603-6 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 6: Edge-Socket Connectors and Printed Board 1998 CENELEC 0 Connectors with 2,54 mm (0,1 in) Contact Spacing for Single or Double-Sided Printed Boards of 1,6 mm (0,063 in) Nominal Thickness 5418 HD 630.2.1 S3 Low-Voltage Fuses Part 2-1: Supplementary Requirements for Fuses for Use by Authorized Persons (Fuses Mainly for 1998 CENELEC 0 Industrial Application) Sections I to V: Examples of Types of Standardized Fuses for Use by Authorized Persons 5419 EN 62053-31 Electricity Metering Equipment (a.c.) Partricular Requirements Part 31: Pulse Output Devices for Electromechanical and 1998 CENELEC 0 Electronic Meters (Two Wires Only) 5420 EN 60679-4-1 Quartz Crystal Controlled Oscillators of Assessed Quality Part 4-1: Blank Detail Specification - Capability Approval 1998 CENELEC 0 5421 EN 60684-3- Flexible Insulating Sleeving Part 3: Specification for Individual Types of Sleeving Sheet 136: Extruded Fluorosilicone 1998 CENELEC 0 136 Sleeving - General Purpose 5422 EN 61747-5 Liquid Crystal and Solid-State Display Devices Part 5: Environmental, Endurance and Mechanical Test Methods - Remains 1998 CENELEC 0 Current 5423 EN 61169-33 Radio-Frequency Connectors Part 33: Sectional Specification for Series BMA r.f. Connectors 1997 CENELEC 0 5424 EN 60317-47 Specifications for Particular Types of Winding Wires Part 47: Aromatic Polyimide Enamelled Rectangular Copper Wire, 1997 CENELEC 0 Class 240 5425 EN 61249-8-8 Materials for Interconnection Structures Part 8: Sectional Specification Set for Non-Conductive Films and Coatings Section 1997 CENELEC 0 8: Temporary Polymer Coatings 5426 EN 61237-4 Broadcast Video Tape Recorders - Methods of Measurement Part 4: Analogue Audio Performance Measurements 1997 CENELEC 0 5427 EN 61566 Measurement of Exposure to Radio-Frequency Electromagnetic Fields Field Strength in the Frequency Range 100 kHz to 1 1997 CENELEC 0 GHz 5428 EN 60264-5-1 Packaging of winding wires Part 5-1: Cylindrical barrelled delivery spools with conical flanges Basic dimensions - 1997 CENELEC 0 Incorporates Amendment A1: 2003 5429 EN 61067-2 Specification for Glass and Glass Polyester Fibre Woven Tapes Part 2: Methods of Test 1997 CENELEC 0 5430 EN 61169-36 Radio-Frequency Connectors Part 36: Sectional Specification for Microminiature r.f. Coaxial Connectors with Snap-On 1997 CENELEC 0 Coupling - Characteristic Impedance 50 ohm (Type MCX) 5431 EN 61007 Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Measuring Methods and Test 1997 CENELEC 0 Procedures 5432 EN 61041-5 Non-Broadcast Video Tape Recorders - Methods of Measurement Part 5: High-Band Video Tape Recorders, Including 1997 CENELEC 0 Those Equipped with Y/C Video Connectors (NTSC/PAL) 5433 EN 61189-1 Test Methods for Electrical Materials, Printed Boards and Other Interconnection Structures and Assemblies Part 1: General 1997 CENELEC 0 Test Methods and Methodology - Incorporates Amendment A1: 2001 5434 EN 61076-4- Connectors with Assessed Quality, for Use in d.c., Low-Frequency Analogue and in Digital High Speed Data Applications 1997 CENELEC 0 102 Part 4: Printed Board Connectors Section 102: Detail Specification for Two-Part Single-Pole Connectors, for Multiple Uses on Plug-In Unit 5435 EN 60352-1 Solderless Connections Part 1: Wrapped Connections - General Requirements, Test Methods and Practical Guidance 1997 CENELEC 0 5436 EN 60618 Inductive Voltage Dividers - Incorporates Amendment A2: 1997 1997 CENELEC 0 5437 EN 61021-2 Laminated Core Packages for Transformers and Inductors for Use in Telecommunication and Electronic Equipment Part 2: 1997 CENELEC 0 Electrical Characteristics for Cores Using YEE 2 Laminations 5438 EN 61248-4 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 4: Sectional Specification for 1997 CENELEC 0 Power Transformers for Switched Mode Power Supplies (SMPS) on the Basis of the Capability Approval Procedure 5439 EN 61754-2 Fibre Optic Connector Interfaces Part 2: Type BFOC/2,5 Connector Family 1997 CENELEC 0 5440 EN 61843 Measuring Method for the Level of Intermodulation Products Generated in a Gyromagnetic Device 1997 CENELEC 0 5441 EN 61300-2-36 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-36: Tests - 1997 CENELEC 0 Flammability (Fire Hazard) 5442 EN 186260 Sectional Specification: Connector Sets for Optical Fibres and Cables Type SC 1997 CENELEC 0 5443 EN 61196-3-2 Radio Frequency Cables Part 3-2: Coaxial Cables for Digital Communication in Horizontal Floor Wiring Detail 1997 CENELEC 0 Specification for Coaxial Cables with Solid Dielectric for Local Area Networks of 185 m Reach and up to 10 Mb/s 5444 EN 61068-2 Specification for Polyester Fibre Woven Tapes Part 2: Methods of Test 1997 CENELEC 0 5445 EN 186290 Sectional Specification: Connector Sets for Optical Fibres and Cables Type MPO 1997 CENELEC 0 5446 EN 61248-1 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 1: Generic Specification 1997 CENELEC 0 5447 EN 61188-1-1 Printed Boards and Printed Board Assemblies - Design and Use Part 1-1: Generic Reqirements - Flatness Considerations 1997 CENELEC 0 for Electronic Assemblies 5448 EN 61068-1 Specification for Polyester Fibre Woven Tapes Part 1: Definitions, Designation and General Requirements 1997 CENELEC 0 5449 EN 61591 Household range hoods and other cooking fume extractors - Methods for measuring performance - Incorporates 1997 CENELEC 0 Amendment A12: 2015 5450 EN 181104 Blank Detail Specification: Fibre Optic Branching Devices Type: Wavelength Selective Transmissive Star for 1997 CENELEC 0 Telecommunication Application 5451 EN 61621 Dry, Solid Insulating Materials - Resistance Test to High-Voltage, Low-Current Arc Discharges 1997 CENELEC 0 5452 EN 61076-3- Connectors with Assessed Quality, for Use in d.c. Low-Frequency Analogue and in Digital High-Speed Data Applications 1997 CENELEC 0 101 Part 3: Rectangular Connectors Section 101: Detail Specification for a Range of Shielded Connectors with Trapezoidal Shaped Shells and Non 5453 EN 61248-6 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 6: Sectional Specification for 1997 CENELEC 0 Inductors on the Basis of the Capability Approval Procedure 5454 EN 60654-4 Operating Conditions for Industrial-Process Measurement and Control Equipment Part 4: Corrosive and Erosive Influences 1997 CENELEC 0 5455 EN 60317-46 Specifications for Particular Types of Winding Wires Part 46: Aromatic Polyimide Enamelled Round Copper Wire, Class 1997 CENELEC 0 240 5456 EN 60444-2 Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in a Pi-Network Part 2: Phase Offset Method for 1997 CENELEC 0 Measurement of Motional Capacitance of Quartz Crystal Units 5457 EN 60244-14 Methods of Measurement for Radio Transmitters Part 14: External Intermodulation Products Caused by Two or More 1997 CENELEC 0 Transmitters Using the Same or Adjacent Antennas 5458 EN 61248-7 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 7: Sectional Specification for 1997 CENELEC 0 High-Frequency Inductors and Intermediate Frequency Transformers on the Basis of the Capability Approval Procedure 5459 EN 61660-1 Short-Circuit Currents in D.C. Auxiliary Installations in Power Plants and Substations Part 1: Calculation of Short-Circuit 1997 CENELEC 0 Currents 5460 EN 61300-3-13 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-13: 1997 CENELEC 0 Examinations and Measurements Control Stability of a Fibre Optic Switch 5461 EN 60107-7 Methods of Measurement on Receivers for Television; Part 7: HDTV Displays 1997 CENELEC 0 5462 ENV 50230 Aeronautical Ground Lighting Electrical Installation Control and Monitoring Systems: General Requirements 1997 CENELEC 0 5463 EN 61603-1 Transmission of Audio and/or Video and Related Signals Using Infra-Red Radiation Part 1: General 1997 CENELEC 0 5464 EN 60477 Laboratory d.c. Resistors - Incorporates Amendment A1: 1997 1997 CENELEC 0 5465 EN 61300-3-9 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-9: 1997 CENELEC 0 Examinations and Measurements - Far-End Crosstalk 5466 EN 165000-5 Film and Hybrid Integrated Circuits Part 5: Procedure for Qualification Approval 1997 CENELEC 0 5467 EN 60654-3 Operating Conditions for Industrial-Process Measurement and Control Equipment Part 3: Mechanical Influences 1997 CENELEC 0 5468 EN 60721-3-5 Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their 1997 CENELEC 0 Severities Section 5: Ground Vehicle Installations 5469 EN 61021-1 Laminated Core Packages for Transformers and Inductors Used in Telecommunication and Electronic Equipment Part 1: 1997 CENELEC 0 Dimensions 5470 EN 61248-2 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 2: Sectional Specification for 1997 CENELEC 0 Signal Transformers on the Basis of the Capability Approval Procedure 5471 EN 61603-2 Transmission of audio and/or video and related signals using infra-red radiation Part 2: Transmission systems for audio 1997 CENELEC 0 wide band and related signals - Incorporates Amendment A1: 2004; Remains Current 5472 EN 61242 Electrical accessories - Cable reels for household and similar purposes - Incorporates Amendment A3: 2018 1997 CENELEC 0 5473 EN 61300-2-13 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-13: Tests - 1997 CENELEC 0 Acceleration 5474 EN 45510-1 Guide for Procurement of Power Station Equipment - Part 1: Common Clauses 1997 CENELEC 0 5475 EN 61196-3-3 Radio Frequency Cables Part 3-3: Coaxial Cables for Digital Communication in Horizontal Floor Wiring Detail 1997 CENELEC 0 Specification for Coaxial Cables with Foamed Dielectric for Local Area Networks of 185 m Reach and up to 10 Mb/s 5476 EN 61754-8 Fibre Optic Connector Interfaces Part 8: Type CF08 Connector Family 1997 CENELEC 0 5477 EN 160200-2 Sectional Specification: Microwave Modular Electronic Units of Assessed Quality Part 2: Index of Test Methods 1997 CENELEC 0 5478 ENV 50232 Aeronautical Ground Lighting Electrical Installation Isolating Transformer: Equipment Specifications and Tests 1997 CENELEC 0 5479 EN 60317-43 Specifications for particular types of winding wires Part 43: Aromatic polyimide tape wrapped round copper wire, class 1997 CENELEC 0 240 - Incorporates Amendment A1: 2010 5480 EN 61580-3 Methods of Measurement for Waveguides Part 3: Variation of Group Delay 1997 CENELEC 0 5481 EN 61660-2 Short-Circuit Currents in D.C. Auxiliary Installations in Power Plants and Substations Part 2: Calculation of Effects 1997 CENELEC 0 5482 EN 61866 Audiovisual Systems Interactive Text Transmission System (ITTS) 1997 CENELEC 0 5483 EN 61146-2 Video Cameras (PAL/SECAM/NTSC) - Methods of Measurement Part 2: Two- and Three-Sensor Professional Cameras 1997 CENELEC 0 5484 EN 60512-19-3 Electromechanical Components for Electronic Equipment Basic Testing Procedures and Measuring Methods Part 19: 1997 CENELEC 0 Chemical Resistance Tests Section 3: Test 19c - Fluid Resistance 5485 EN 60864-2 Standardization of Interconnections between Broadcasting Transmitters or Transmitter Systems and Supervisory 1997 CENELEC 0 Equipment Part 2: Interface Standards for Systems Using Data Bus Type Interconnections 5486 EN 50117-5 Coaxial Cables Used in Cabled Distribution Networks; Part 5: Sectional Specification for Indoor Drop Cables for Use in 1997 CENELEC 0 Networks Operating at Frequencies between 5 MHz and 2150 MHz 5487 EN 60406 Cassettes for Medical X-Ray Diagnosis Radiographic Cassettes and Mammographic Cassettes 1997 CENELEC 0 5488 EN 61269-1 Fibre Optic Terminus Sets; Part 1: Generic Specification 1997 CENELEC 0 5489 EN 61595-1 Multichannel Digital Audio Tape Recorder (DATR), Reel-to-Reel System, for Professional Use Part 1: Format A 1997 CENELEC 0 5490 EN 61146-3 Video Cameras (PAL/SECAM/NTSC) - Methods of Measurement Part 3: Non-Broadcast Camera-Recorders 1997 CENELEC 0 5491 EN 60512-1-3 Electromechanical Components for Electronic Equipment Basic Testing Procedures and Measuring Methods Part 1: 1997 CENELEC 0 General Examination Section 3: Test 1c - Electrical Engagement Length 5492 EN 60835-2-11 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on 1997 CENELEC 0 Terrestrial Radio-Relay Systems Section 11: Cross-Polarization Interference Canceller 5493 EN 60107-2 Methods of Measurement on Receivers for Television Broadcast Transmissions Part 2: Audio Channels - General Methods 1997 CENELEC 0 and Methods for Monophonic Channels 5494 EN 62326-4-1 Printed Boards; Part 4: Rigid Multilayer Printed Boards with Interlayer Connections Sectional Specification; Section 1: 1997 CENELEC 0 Capability Detail Specification Performance Levels A, B and C 5495 EN 175500 Sectional Specification: Cable Outlet Accessories for Connectors, Including Qualification Approval and Capability 1997 CENELEC 0 Approval 5496 EN 61300-2-29 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-29: Tests - 1997 CENELEC 0 Low Air Pressure 5497 EN 61580-6 Methods of measurement for waveguides - Part 6: Return loss on waveguide and waveguide assemblies 1997 CENELEC 0 5498 EN 61725 Analytical Expression for Daily Solar Profiles 1997 CENELEC 0 5499 EN 61300-2-8 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-8: Tests - 1997 CENELEC 0 Bump 5500 EN 61300-2-27 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-27: Tests - 1997 CENELEC 0 Dust - Laminar Flow 5501 EN 61300-2-4 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-4: Tests - 1997 CENELEC 0 Fibre/Cable Retention 5502 EN 60317-44 Specifications for particular types of winding wires Part 44: Aromatic polyimide tape wrapped rectangular copper wire, 1997 CENELEC 0 class 240 - Incorporates Amendment A1: 2010 5503 EN 61642 Industrial a.c. Networks Affected by Harmonics Application of Filters and Shunts Capacitors 1997 CENELEC 0 5504 EN 60654-2 Operating Conditions for Industrial-Process Measurement and Control Equipment Part 2: Power 1997 CENELEC 0 5505 EN 61628-1 Corrugated Pressboard and Presspaper for Electrical Purposes Part 1: Definitions, Designations and General Requirements 1997 CENELEC 0 5506 EN 61067-1 Specification for Glass and Glass Polyester Fibre Woven Tapes Part 1: Definitions, Classification and General 1997 CENELEC 0 Requirements 5507 EN 61269-1-1 Fibre Optic Terminus Sets Part 1-1: Blank Detail Specification 1997 CENELEC 0 5508 EN 62326-4 Printed Boards; Part 4: Rigid Multilayer Printed Boards with Interlayer Connections Sectional Specifications 1997 CENELEC 0 5509 EN 60889 Hard-Drawn Aluminium Wire for Overhead Line Conductors 1997 CENELEC 0 5510 EN 61243-2 Live working Voltage detectors Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c - Incorporates 1997 CENELEC 0 Amendments A1: 2000 and A2: 2002 5511 EN 60874-17 Connectors for Optical Fibres and Cables Part 17: Sectional Specification for Fibre Optic Connector Type F-05 (Friction 1997 CENELEC 0 Lock) 5512 ENV 50235 Aeronautical Ground Lighting Electrical Installation Signs: Equipment Specifications and Tests 1997 CENELEC 0 5513 EN 60444-3 Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in a Pi-Network Part 3: Basic Method for the 1997 CENELEC 0 Measurement of Two-Terminal Parameters of Quartz Crystal Units up to 200 MHz by Phase Technique in a Pi-Network with Compensation of the Par 5514 EN 60444-5 Measurement of Quartz Crystal Unit Parameters Part 5: Methods for the Determination of Equivalent Electrical Parameters 1997 CENELEC 0 Using Automatic Network Analyzer Techniques and Error Correction 5515 EN 50221 Common Interface Specification for Conditional Access and Other Digital Video Broadcasting Decoder Applications 1997 CENELEC 0 5516 EN 61300-2-30 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-30: Tests - 1997 CENELEC 0 Solar Radiation 5517 EN 60317-42 Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper wire, class 1997 CENELEC 0 200 - Incorporates Amendment A1: 2010 5518 EN 60534-6-1 Industrial-Process Control Valves Part 6: Mounting Details for Attachment of Positioners to Control Valves Section 1: 1997 CENELEC 0 Positioner Mounting on Linear Actuators 5519 EN 50178 Electronic Equipment for Use in Power Installations - Remains Current 1997 CENELEC 0 5520 ENV 50234 Aeronautical Ground Lighting Electrical Installation Flashing Lights: Equipment Specifications and Tests 1997 CENELEC 0 5521 EN 60107-8 Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions Part 8: Measurement on 1997 CENELEC 0 D2-MAC/Packet Equipment 5522 EN 60645-2 Audiometers Part 2: Equipment for Speech Audiometry 1997 CENELEC 0 5523 EN 50117-6 Coaxial Cables Used in Cabled Distribution Networks; Part 6: Sectional Specification for Outdoor Drop Cables for Use in 1997 CENELEC 0 Networks Operating at Frequencies between 5 MHz and 2150 MHz 5524 EN 61300-3-27 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-27: 1997 CENELEC 0 Examinations and Measurements - Measurement Method for the Hole Location of a Multiway Connector Plug 5525 EN 186270 Sectional specification: Connector sets for optical fibres and cables Type LSH 1997 CENELEC 0 5526 EN 60352-6 Solderless Connections Part 6: Insulation Piercing Connections General Requirements, Test Methods and Practical 1997 CENELEC 0 Guidance 5527 EN 60814 Insulating Liquids - Oil-Impregnated Paper and Pressboard Determination of Water by Automatic Coulometric Karl 1997 CENELEC 0 Fischer Titration 5528 EN 60169-21 Radio-Frequency Connectors Part 21: Two Types of Radio-Frequency Connectors with Inner Diameter of Outer Conductor 1997 CENELEC 0 9,5 mm (0,374 in) with Different Versions of Screw Coupling Characteristic Impendance 50 ohms (Types SC-A and SC-B) 5529 EN 125000 Generic Specification: Cores Made of Ferrite Materials 1997 CENELEC 0 5530 EN 61169-1-1 Radio-Frequency Connectors Part 1-1: Single, Multi-Series, Dual-Language Blank Detail Specification 1997 CENELEC 0 5531 EN 61313-1 Fibre Optic Passive Components and Cable Assemblies Part 1: Capability Approval - Generic Specification 1997 CENELEC 0 5532 EN 160100 Sectional Specification: Capability Approval of Manufacturers of Printed Board Assemblies of Assessed Quality 1997 CENELEC 0 5533 EN 61248-5 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 5: Sectional Specification for 1997 CENELEC 0 Pulse Transformers on the Basis of the Capability Approval Procedure 5534 EN 61300-3-19 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-19: 1997 CENELEC 0 Examinations and Measurements - Polarization Dependence of Return Loss of a Single Mode Fibre Optic Component 5535 EN 61248-3 Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 3: Sectional Specification for 1997 CENELEC 0 Power Transformers on the Basis of the Capability Approval Procedure 5536 EN 61284 Overhead Lines - Requirements and Tests for Fittings 1997 CENELEC 0 5537 EN 50049-1 Domestic and Similar Electronic Equipment Interconnection Requirements: Peritelevision Connector - Incorporates 1997 CENELEC 0 Amendment A1: 1998 5538 EN 61300-3-8 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-8: 1997 CENELEC 0 Examinations and Measurements - Ambient Light Susceptibility 5539 EN 60107-1 Methods of Measurement on Receivers for Television Broadcast Transmissions; Part 1: General Considerations; 1997 CENELEC 0 Measurements at Radio and Video Frequencies 5540 EN 60704-2-8 Household and Similar Electrical Appliances Test Code for the Determination of Airborne Acoustical Noise Part 2: 1997 CENELEC 0 Particular Requirements for Electric Shavers 5541 EN 61754-6 Fibre Optic Connector Interfaces - Part 6: Type MU Connector Family 1997 CENELEC 0 5542 EN 60477-2 Laboratory Resistors - Part 2: Laboratory a.c. Resistors - Incorporates Amendment A1: 1997 1997 CENELEC 0 5543 EN 61041-4 Non-Broadcast Video Tape Recorders Methods of Measurement Part 4: Calibration Tape (NTSC/PAL/SECAM) 1997 CENELEC 0 5544 EN 61300-2-39 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-39: Tests - 1997 CENELEC 0 Susceptibility to External Magnetic Fields 5545 EN 61300-3-11 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-11: 1997 CENELEC 0 Examinations and Measurements Engagement and Separation Forces 5546 EN 60512-1-4 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 1: 1997 CENELEC 0 General - Section 4: Test 1d: Contact Protection Effectiveness (Scoop-Proof) 5547 EN 61300-2-32 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-32: Tests - 1997 CENELEC 0 Water Vapour Permeation 5548 EN 60444-4 Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in a Pi-Network Part 4: Method for the 1997 CENELEC 0 Measurement of the Load Resonance Frequency fL, Load Resonance Resistance RL and the Calculation of Other Derived Values of Quartz Crystal Units, 5549 EN 60672-3 Ceramic and Glass-Insulating Materials Part 3: Specifications for Individual Materials 1997 CENELEC 0 5550 EN 60437 Radio Interference Test on High-Voltage Insulators 1997 CENELEC 0 5551 EN 60444-1 Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in a Pi-Network - Part 1: Basic Method for the 1997 CENELEC 0 Measurement of Resonance Frequency and Resonance Resistance of Quartz Crystal Units by Zero Phase Technique in a Pi- Network - Incorporates 5552 EN 60404-4 Magnetic materials Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials - 1997 CENELEC 0 Incorporates Amendment A2: 2008 5553 EN 181103 Blank Detail Specification: Fibre Optic Branching Devices Type: Non Wavelength Selective Transmissive Star for 1997 CENELEC 0 Telecommunication Application 5554 EN 61247 PM-Cores Made of Magnetic Oxides and Associated Parts - Dimensions 1997 CENELEC 0 5555 EN 60730-2-14 Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators - 1997 CENELEC 0 Incorporates Amendments A11: 2005 and A2: 2008 5556 EN 50227 Control Circuit Devices and Switching Elements Proximity Sensors, d.c. Interface for Proximity Sensors and Switching 1997 CENELEC 0 Amplifiers (NAMUR) 5557 ENV 50231 Aeronautical Ground Lighting Electrical Installation Constant Current Regulator: Equipment Specifications and Tests 1997 CENELEC 0 5558 EN 60874-19 Connectors for Optical Fibres and Cables Part 19: Sectional Specification for Fibre Optic Connector - Type SC-D(uplex) 1997 CENELEC 0 5559 EN 61619 Insulating Liquids - Contamination by Polychlorinated Biphenyls (PCBs) Method of Determination by Capillary Column 1997 CENELEC 0 Gas Chromatography 5560 EN 50117-3 Coaxial cables used in cabled distribution networks Part 3: Sectional specification for outdoor drop cables 1996 CENELEC 0 5561 EN 60852-4 Outline Dimensions of Transformers and Inductors for Use in Telecommunication and Electronic Equipment Part 4: 1996 CENELEC 0 Transformers and Inductors Using YUI-2 Laminations 5562 EN 120000 Generic Specification: Semiconductor Optoelectronic and Liquid Crystal Devices - Remains Current 1996 CENELEC 0 5563 EN 60305 Insulators for Overhead Lines with a Nominal Voltage Above 1 kV Ceramic or Glass Insulator Units for a.c. Systems 1996 CENELEC 0 Characteristics of Insulator Units of the Cap and Pin Type 5564 EN 60870-2-1 Telecontrol Equipment and Systems Part 2: Operating Conditions Section 1: Power Supply and Electromagnetic 1996 CENELEC 0 Compatibility 5565 EN 165000-4 Film and Hybrid Integrated Circuits Part 4: Customer Information, Product Assessment Level Schedules and Blank Detail 1996 CENELEC 0 Specification 5566 EN 140104 Blank Detail Specification: Fixed Low Power Non-Wirewound Resistors (Assessment Levels SB and SC) 1996 CENELEC 0 5567 EN 50212 Connectors for Thermoelectric Sensors 1996 CENELEC 0 5568 EN 61733-1 Measuring Relays and Protection Equipment Protection Communication Interfacing Part 1: General 1996 CENELEC 0 5569 EN 61319-1 Interconnections of satellite receiving equipment - Part 1: Europe - Incorporates Amendment A11: 1999 1996 CENELEC 0 5570 EN 60983 Miniature Lamps - Incorporates Amendment A1: 2005 1996 CENELEC 0 5571 HD 607 S1 Busbar Bushings up to 1 kV and from 1,25 kA to 5 kA, for Liquid Filled Transformers 1996 CENELEC 0 5572 EN 140203 Blank Detail Specification: Fixed Power Resistors (Assessment Level H) 1996 CENELEC 0 5573 EN 116000-3 Generic Specification: Electromechanical All- or-Nothing Relays Part 3: Test and Measurement Procedures 1996 CENELEC 0 5574 EN 60276 Definitions and Nomenclature for Carbon Brushes, Brush-Holders, Commutators and Slip-Rings 1996 CENELEC 0 5575 EN 61629-1 Aramid Pressboard for Electrical Purposes Part 1: Definitions, Designations and General Requirements 1996 CENELEC 0 5576 EN 61000-2-9 Electromagnetic Compatibility (EMC) Part 2: Environment Section 9: Description of HEMP Environment - Radiated 1996 CENELEC 0 Disturbance Basic EMC Publication 5577 EN 61629-2 Aramid Pressboard for Electrical Purposes Part 2: Methods of Test 1996 CENELEC 0 5578 EN 60870-2-2 Telecontrol Equipment and Systems - Part 2: Operating Conditions - Section 2: Environmental Conditions (Climate, 1996 CENELEC 0 Mechanical and Other Non-Electrical Influences) 5579 EN 60835-3-14 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on 1996 CENELEC 0 Satellite Earth Stations Section 14: Earth Stations for Satellite News Gathering (SNG) 5580 EN 50090-2-2 Home and building electronic systems (HBES) - Part 2-2: System overview - General technical requirements - Incorporates 1996 CENELEC 0 Amendments A1: 2002 and A2: 2007; Remains Current 5581 EN 61249-8-7 Materials for Interconnection Structures Part 8: Sectional Specification Set for Non-Conductive Films and Coatings Section 1996 CENELEC 0 7: Marking Legend Inks 5582 EN 60901 Single-capped fluorescent lamps - Performance specifications - Incorporates Amendment A6: 2017 1996 CENELEC 0 5583 EN 60835-3-2 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on 1996 CENELEC 0 Satellite Earth Stations Section 2: Antenna 5584 EN 60068-4 Environmental Testing Part 4: Information for Specification Writers Test Summaries 1996 CENELEC 0 5585 EN 60383-1 Insulators for Overhead Lines with a Nominal Voltage Above 1 kV Part 1: Ceramic or Glass Insulator Units for a.c. 1996 CENELEC 0 Systems Definitions, Test Methods and Acceptance Criteria - Incorporates Amendment A11: 1999 5586 EN 50187 Gas-Filled Compartments for a.c. Switchgear and Controlgear for Rated Voltages Above 1 kV and up to and Including 52 1996 CENELEC 0 kV 5587 EN 60917-2-2 Modular Order for the Development of Mechanical Structures for Electronic Equipment Practices Part 2: Sectional 1996 CENELEC 0 Specification - Interface Co-Ordination Dimensions for the 25 mm Equipment Practice Section 2: Detail Specification - Dimensions for Subracks, 5588 EN 60601-2-9 Medical Electrical Equipment; Part 2: Particular Requirements for the Safety of Patient Contact Dosemeters Used in 1996 CENELEC 0 Radiotherapy with Electrically Connected Radiation Detectors - Incorporating Corrigendum December 1996 5589 EN 50117-4 Coaxial Cables Used in Cabled Distribution Networks Part 4: Sectional Specification for Distribution and Trunk Cables 1996 CENELEC 0 5590 EN 61114-2 Methods of Measurement on Receiving Antennas for Satellite Broadcast Transmission in the 11/12 GHz Band Part 2: 1996 CENELEC 0 Mechanical and Environmental Tests on Individual and Collective Receiving Antennas 5591 EN 61334-4-41 Distribution Automation Using Distribution Line Carrier Systems Part 4: Data Communication Protocols Section 41: 1996 CENELEC 0 Application Protocols Distribution Line Message Specification 5592 EN 60512-12-6 Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 12: 1996 CENELEC 0 Soldering Tests Section 6: Test 12f: Sealing Against Flux and Cleaning Solvents in Machine Soldering 5593 EN 125500 Sectional Specification: Magnetic Oxide Ring Cores for Interference Suppression and Low Level Signal Transformer 1996 CENELEC 0 Applications 5594 EN 61797-1 Transformers and Inductors for Use in Telecommunication and Electrical Equipment - Main Dimensions of Coil Formers; 1996 CENELEC 0 Part 1: Coil Formers for Laminated Cores 5595 EN 61270-1 Capacitors for Microwave Ovens Part 1: General 1996 CENELEC 0 5596 EN 61329 Sound System Equipment Methods of Measuring and Specifying the Performance of Sounders (Electroacoustic 1996 CENELEC 0 Transducers for Tone Production) 5597 EN 50098-2 Customer Premises Cabling for Information Technology Part 2. 2048 kbit/s ISDN Primary Access and Leased Line 1996 CENELEC 0 Network Interface 5598 EN 175200 Sectional Specification: Circular Connectors 1996 CENELEC 0 5599 EN 60835-3-6 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on 1996 CENELEC 0 Satellite Earth Stations Section 6: High Power Amplifiers 5600 EN 61334-4-42 Distribution Automation Using Distribution Line Carrier Systems Part 4: Data Communication Protocols Section 42: 1996 CENELEC 0 Application Protocols - Application Layer 5601 EN 50225 Code of Practice for the Safe Use of Fully Enclosed Oil-Filled Electrical Equipment Which May Be Contaminated with 1996 CENELEC 0 PCBs 5602 EN 61334-4-1 Distribution Automation Using Distribution Line Carrier Systems Part 4: Data Communication Protocols Section 1: 1996 CENELEC 0 Reference Model of the Communication System 5603 EN 50203 Automatic Channel Installation (ACI) - Incorporates Amendment A1: 1997 1996 CENELEC 0 5604 EN 175300 Sectional Specification: Rectangular Connectors for Frequencies Below 3 MHz 1996 CENELEC 0 5605 EN 60931-1 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV Part 1: 1996 CENELEC 0 General - Performance, testing and rating - Safety requirements - Guide for installation and operation - Incorporates Amendment A1 5606 EN 60931-3 Shunt Power Capacitors of the Non-Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 kV 1996 CENELEC 0 Part 3: Internal Fuses 5607 EN 61223-3-3 Evaluation and Routine Testing in Medical Imaging Departments; Part 3-3: Acceptance Tests - Imaging Performance of X- 1996 CENELEC 0 Ray Equipment for Digital Subtraction Angiography (DSA) 5608 EN 60068-2-67 Environmental Testing - Part 2: Tests Test Cy: Damp Heat, Steady State, Accelerated Test Primarily Intended for 1996 CENELEC 0 Components 5609 EN 165000-3 Film and Hybrid Integrated Circuits Part 3: Self-Audit Checklist and Report for Film and Hybrid Integrated Circuit 1996 CENELEC 0 Manufacturers 5610 EN 61146-1 Video Cameras (PAL/SECAM/NTSC) Methods of Measurement Part 1: Non-Broadcast Single-Sensor Cameras 1996 CENELEC 0 5611 EN 61429 Marking of Secondary Cells and Batteries with the International Recycling Symbol ISO 7000-1135 and Indications 1996 CENELEC 0 Regarding Directives 93/86/EEC and 91/157/EEC - Incorporates Amendment A11: 1998 5612 EN 60094-3 Magnetic Tape Sound Recording and Reproducing Systems - Part 3: Methods of Measuring the Characteristics of 1996 CENELEC 0 Recording and Reproducing Equipment for Sound on Magnetic Tape - Incorporates Amendment A3: 1996 5613 EN 61580-9 Methods of Measurement for Waveguides Part 9: Reflection Coefficient at Rectangular Waveguide Interfaces 1996 CENELEC 0 5614 EN 61334-4-32 Distribution Automation Using Distribution Line Carrier Systems Part 4: Data Communication Protocols Section 32: Data 1996 CENELEC 0 Link Layer - Logical Link Control (LLC) 5615 EN 61773 Overhead Lines Testing of Foundations for Structures 1996 CENELEC 0 5616 EN 61076-4- Connectors with Assessed Quality, for Use in d.c., Low-Frequency Analogue and in Digital High-Speed Data Applications 1996 CENELEC 0 001 Part 4: Printed Board Connectors Section 001: Blank Detail Specification 5617 HD 627 S1 Multicore and Multipair Cable for Installation Above and Below Ground 1996 CENELEC 0 5618 EN 60870-5- Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 102: Companion Standard for the Transmission 1996 CENELEC 0 102 of Integrated Totals in Electric Power Systems 5619 EN 61249-5-4 Materials for Interconnection Structures Part 5: Sectional Specification Set for Conductive Foils and Films with and 1996 CENELEC 0 without Coatings Section 4: Conductive Inks 5620 EN 60931-2 Shunt Power Capacitors of the Non-Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 kV 1996 CENELEC 0 Part 2: Ageing Test and Destruction Test 5621 EN 60317-26 Specifications for particular types of winding wires Part 26. Polyamide-imide enamelled round copper wire, class 200 - 1996 CENELEC 0 Incorporates Amendment A2: 2010 5622 EN 61434 Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Guide to the Designation of Current in 1996 CENELEC 0 Alkaline Secondary Cell and Battery Standards 5623 EN 61580-1 Methods of Measurement for Waveguides Part 1: Decoupling and Rotation of the Plane of Polarization 1996 CENELEC 0 5624 EN 140102 Blank Detail Specification: Fixed Low Power Non-Wirewound Resistors (Assessment Level M) 1996 CENELEC 0 5625 EN 60068-2-70 Environmental Testing Part 2: Tests Test Xb: Abrasion of Markings and Letterings Caused by Rubbing of Fingers and 1996 CENELEC 0 Hands 5626 EN 61063 Acoustics Measurement of Airborne Noise Emitted by Steam Turbines and Driven Machinery 1996 CENELEC 0 5627 EN 60512-16- Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 16: 1996 CENELEC 0 20 Mechanical Tests on Contacts and Terminations Section 20: Test 16t: Mechanical Strength (Wired Termination of Solderless Connections) 5628 EN 140103 Blank Detail Specification: Fixed Low Power Non-Wirewound Resistors (Assessment Level P) 1996 CENELEC 0 5629 EN 60838-2-1 Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14 - Incorporates Amendments A1: 1996 CENELEC 0 1998 and A2: 2004; Incorporating Corrigendum May 2013 5630 EN 60317-29 Specifications for particular types of winding wires Part 29: Polyester or polyesterimide overcoated with polyamide-imide 1996 CENELEC 0 enamelled rectangular copper wire, class 200 - Incorporates Amendment A2: 2010 5631 EN 140201 Blank Detail Specification: Fixed Power Resistors (Assessment Level S) 1996 CENELEC 0 5632 EN 61076-4 Connectors with Assessed Quality, for Use in d.c., Low Frequency Analogue and in Digital High-Speed Data Applications 1996 CENELEC 0 - Part 4: Sectional Specification Printed Board Connectors 5633 EN 61041-2 Non-Broadcast Video Tape Recorders Methods of Measurement Part 2: Video Characteristics Chrominance SECAM 1996 CENELEC 0 5634 EN 60851-1 Winding wires - Test methods - Part 1: General - Incorporates Amendment A2: 2009 1996 CENELEC 0 5635 EN 50147-1 Anechoic Chambers Part 1: Shield Attenuation Measurement 1996 CENELEC 0 5636 EN 60118-12 Hearing Aids Part 12: Dimensions of Electrical Connector Systems 1996 CENELEC 0 5637 EN 132102 Blank Detail Specification: Fixed Multilayer Ceramic Surface Mounting Capacitors Assessment Level DZ 1996 CENELEC 0 5638 EN 60598-2-23 Luminaires - Part 2-23: Particular Requirements - Extra Low-Voltage Lighting Systems for Filament Lamps - Incorporates 1996 CENELEC 0 Amendment A1: 2000 5639 EN 165000-1 Film and Hybrid Integrated Circuits Part 1: Generic Specification Capability Approval Procedure 1996 CENELEC 0 5640 EN 61580-7 Methods of Measurement for Waveguides Part 7: Graphical Method for the Determination of Waveguide Performance 1996 CENELEC 0 5641 EN 140200 Sectional Specification: Fixed Power Resistors - Incorporates Amendment A1: 2001 1996 CENELEC 0 5642 EN 60870-6- Telecontrol equipment and systems Part 6: Telecontrol protocols compatible with ISO standards and ITU-T 1996 CENELEC 0 501 recommendations Section 501: TASE.1 Service definitions 5643 EN 61580-8 Methods of Measurement for Waveguides Part 8: Waveguide Power Holding Capability 1996 CENELEC 0 5644 EN 61000-5-5 Electromagnetic Compatibility (EMC) Part 5: Installation and Mitigation Guidelines Section 5: Specification of Protective 1996 CENELEC 0 Devices for HEMP Conducted Disturbance Basic EMC Publication 5645 EN 50195 Code of Practice for the Safe Use of Fully Enclosed Askarel-Filled Electrical Equipment 1996 CENELEC 0 5646 EN 140202 Blank Detail Specification: Fixed Power Resistors (Assessment Level M) 1996 CENELEC 0 5647 EN 61580-2 Methods of Measurement for Waveguides Part 2: Level of Intermodulation Products 1996 CENELEC 0 5648 EN 165000-2 Film and Hybrid Integrated Circuits Part 2: Internal Visual Inspection and Special Tests 1996 CENELEC 0 5649 EN 61334-3-21 Distribution Automation Using Distribution Line Carrier Systems Part 3: Mains Signalling Requirements Section 2.1: MV 1996 CENELEC 0 Phase-To-Phase Isolated Capacitive Coupling Device 5650 EN 60835-3-13 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on 1996 CENELEC 0 Satellite Earth Stations Section 13: VSAT Systems 5651 EN 61610 Prints and Transparencies Produced from Electronic Sources Assessment of Image Quality 1996 CENELEC 0 5652 EN 61249-5-1 Materials for Interconnection Structures Part 5. Sectional Specification Set for Conductive Foils and Films with and 1996 CENELEC 0 without Coatings Section 1. Copper Foils (for the Manufacture of Copper- Clad Base Materials) 5653 EN 60870-6- Telecontrol Equipment and Systems Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T 1996 CENELEC 0 502 Recommendations Section 502: TASE.1 Protocol Definitions 5654 EN 60068-2-68 Environmental Testing Part 2: Tests Test L: Dust and Sand 1996 CENELEC 0 5655 EN 137000 Generic Specification Fixed Aluminium Electrolytic a.c. Capacitors with Non- Solid Electrolyte for Use with Motors 1995 CENELEC 0 5656 EN 60835-3-4 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on 1995 CENELEC 0 Satellite Earth Stations Section 4: Low Noise Amplifier 5657 EN 61028 Electrical Measuring Instruments - X-Y Recorders 1995 CENELEC 0 5658 EN 60156 Insulating Liquids Determination of the Breakdown Voltage at Power Frequency Test Method 1995 CENELEC 0 5659 EN 60371-3-4 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 4: Polyester 1995 CENELEC 0 Film-Backed Mica Paper with a B-Stage Epoxy Resin Binder - Incorporates Amendment A1: 2006 5660 HD 384.5.52 S1 Electrical Installations of Buildings Part 5: Selection and Erection of Electrical Equipment Chapter 52: Wiring Systems 1995 CENELEC 0 5661 EN 60675 Household Electric Direct-Acting Room Heaters Methods for Measuring Performance - Incorporates Amendment A1: 1998 1995 CENELEC 0 5662 EN 60064 Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements - Incorporates 1995 CENELEC 0 Amendments A11: 2007 and A5: 2009 5663 EN 60634 Heat Test Source (H.T.S.) Lamps for Carrying out Heating Tests on Luminaires 1995 CENELEC 0 5664 EN 60835-3-11 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on 1995 CENELEC 0 Satellite Earth Stations Section 11. Service Channel Equipment for SCPC-PSK Transmission 5665 EN 50109-2-2 Hand crimping tools Tools for the crimp termination of electric cables and wires for low frequency and radio frequency 1995 CENELEC 0 applications Part 2-2: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with removable 5666 EN 61235 Live working Insulating hollow tubes for electrical purposes 1995 CENELEC 0 5667 EN 61232 Aluminium-Clad Steel Wires for Electrical Purposes - Incorporates Amendment A11: 2000 1995 CENELEC 0 5668 EN 61182-7 FAULTY STANDARD Printed Boards Electronic Data Description and Transfer Part 7: Bare Board Electric Test 1995 CENELEC 0 Information in Digital Form 5669 EN 61266 Ultrasonics Hand-Held Probe Doppler Foetal Heartbeat Detectors Performance Requirements and Methods of 1995 CENELEC 0 Measurement and Reporting 5670 HD 543.2.S1 Performance and Testing of Teleprotection Equipment of Power Systems Part 2: Analogue Comparison Systems 1995 CENELEC 0 5671 EN 137100 Sectional Specification: Fixed Aluminium Electrolytic a.c. Capacitors with Non- Solid Electrolyte for Motor Starter 1995 CENELEC 0 Applications Qualification Approval 5672 EN 60155 Glow-Starters for Fluorescent Lamps - Incorporates Amendments A1: 1995 and A2: 2007 1995 CENELEC 0 5673 EN 61067-3-1 Glass and Glass Polyester Fibre Woven Tapes Part 3: Specifications for Individual Materials Sheet 1: Type 1, 2 and 3 1995 CENELEC 0 Tapes 5674 EN 60870-6-2 Telecontrol Equipment and Systems Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T 1995 CENELEC 0 Recommendations Section 2: Use of Basic Standards (OSI Layers 1-4) 5675 HD 22.2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods 1995 CENELEC 0 S2/A11 5676 EN 61194 Characteristic Parameters of Stand-Alone Photovoltaic (PV) Systems 1995 CENELEC 0 5677 EN 60721-1 Classification of Environmental Conditions Part 1: Environmental Parameters and Their Severities (Incorporates A2) 1995 CENELEC 0 5678 EN 61204 Low-Voltage Power Supply Devices, d.c. Output - Performance Characteristics - Incorporates Amendment A1: 2001 1995 CENELEC 0 5679 EN 60870-6- Telecontrol Equipment and Systems Part 6: Telecontrol Protocols Compatible with ISO Standards ITU-T 1995 CENELEC 0 601 Recommendations Section 601 : Functional Profile for Providing the Connection-Oriented Transport Service in End System Connected Via Permanent Access to a 5680 EN 60835-2-4 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on 1995 CENELEC 0 Terrestrial Radio-Relay Systems Section 4: Transmitter/Receiver Including Modulator/Demodulator - Incorporates Amendment A1: 1997 5681 EN 61206 Ultrasonics Continuous-Wave Doppler Systems - Test Procedures 1995 CENELEC 0 5682 EN 61237-2 Broadcast Video Tape Recorders Methods of Measurement Part 2: Electrical Measurements of Analogue Composite Video 1995 CENELEC 0 Signals 5683 HD 22.9 S2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 9: Single Core Non-Sheathed Cables for 1995 CENELEC 0 Fixed Wiring Having Low Emission of Smoke and Corrosive Gases 5684 EN 61120-5 Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 5: Reels 1995 CENELEC 0 5685 EN 60672-1 Ceramic and Glass Insulating Materials Part 1: Definitions and Classification 1995 CENELEC 0 5686 EN 60268-12 Sound System Equipment Part 12: Application of Connectors for Broadcast and Similar Use - Incorporates Amendment 1995 CENELEC 0 A2: 1995 5687 EN 60835-2-6 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on 1995 CENELEC 0 Terrestrial Radio-Relay Systems Section 6: Protection Switching 5688 EN 50148 Electronic Taximeters 1995 CENELEC 0 5689 EN 60721-3-3 Classification of Environmental Conditions; Part 3: Classification of Groups of Environmental Parameters and Their 1995 CENELEC 0 Severities; Section 3: Stationary Use at Weatherprotected Locations - Incorporates Amendment A2: 1997 5690 EN 60835-3-9 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on 1995 CENELEC 0 Satellite Earth Stations Section 9: Terminal Equipment SCPC-PSK 5691 EN 60953-2 Rules for Steam Turbine Thermal Acceptance Tests Part 2: Method B Wide Range of Accuracy for Various Types and 1995 CENELEC 0 Sizes of Turbines 5692 EN 50109-2-4 Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio 1995 CENELEC 0 Frequency Applications Part 2-4: Particular Requirements for Centre Contacts of RF Connectors, Series SMZ 5693 EN 60371-3-9 Insulating materials based on mica Part 3: Specifications for individual materials Sheet 9: Moulding micanite - Incorporates 1995 CENELEC 0 Amendment A1: 2007 5694 EN 61303 Medical Electrical Equipment; Radionuclide Calibrators; Particular Methods for Describing Performance 1995 CENELEC 0 5695 EN 61325 Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Ceramic or Glass Insulator Units for d.c. Systems 1995 CENELEC 0 Definitions, Test Methods and Acceptance Criteria 5696 EN 60255-21-3 Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests on Measuring Relays and Protection Equipment 1995 CENELEC 0 Section 3: Seismic Tests 5697 EN 190000 Generic Specification Monolithic Integrated Circuits 1995 CENELEC 0 5698 EN 50109-2-5 Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio 1995 CENELEC 0 Frequency Applications Part 2-5: Particular Requirements for the Termination of Twin-Ax Cable for Databus Applications 5699 EN 61252 Electroacoustics - Specifications for Personal Sound Exposure Meters - Incorporates Amendment A2: 2017 1995 CENELEC 0 5700 EN 61305-1 Household High-Fidelity Audio Equipment and Systems - Methods of Measuring and Specifying the Performance - Part 1: 1995 CENELEC 0 General 5701 EN 60371-3-7 Insulating materials based on mica Part 3: Specifications for individual materials Sheet 7: Polyester film mica paper with an 1995 CENELEC 0 epoxy resin binder for single conductor taping - Incorporates Amendment A1: 2006 5702 EN 61068-3-1 Polyester Fibre Woven Tapes - Part 3: Specifications for Individual Materials - Sheet 1: Tapes Woven on Conventional or 1995 CENELEC 0 Shuttleless Looms 5703 EN 100012 Basic Specification: X-Ray Inspection of Electronic Components 1995 CENELEC 0 5704 EN 60383-2 Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Part 2: Insulator Strings and Insulator Sets for a.c. 1995 CENELEC 0 Systems Definitions, Test Methods and Acceptance Criteria 5705 EN 60953-1 Rules for Steam Turbine Thermal Acceptance Tests Part 1: Method A High Accuracy for Large Condensing Steam 1995 CENELEC 0 Turbines 5706 EN 61041-1 Non-Broadcast Video Tape Recorders Methods of Measurement Part 1: General Video (NTSC/PAL) and Audio 1995 CENELEC 0 (Longitudinal) Characteristics 5707 EN 60371-3-8 Insulating materials based on mica Part 3: Specifications for individual materials Sheet 8: Mica paper tapes for flame- 1995 CENELEC 0 resistant security cables - Incorporates Amendment A1: 2007 5708 EN 50109-2-1 Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio 1995 CENELEC 0 Frequency Applications Part 2-1: Particular Requirements for Radio Frequency Connectors and Concentric Contacts - Open Throat Tools with Fixed Die 5709 EN 50109-2-3 Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio 1995 CENELEC 0 Frequency Applications Part 2-3: Particular Requirements for Contacts of Electrical Connectors 5710 HD 384.3 S2 Electrical Installations of Buildings Part 3: Assessment of General Characteristics 1995 CENELEC 0 5711 HD 21.9 S2 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 9: Single Core Non-Sheathed 1995 CENELEC 0 Cable for Installation at Low Temperatures 5712 EN 60843-2 Helical-Scan Video Tape Cassette System Using 8 mm Magnetic Tape - 8 mm Video Part 2: PCM Multi-Track Audio 1995 CENELEC 0 System 5713 HD 22.1 S2/ AMD 19 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1995 CENELEC 0 A19 5714 HD 22.3 S3 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Heat Resistant Silicone Rubber Insulated 1995 CENELEC 0 Cables 5715 EN 60835-2-5 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on 1995 CENELEC 0 Terrestrial Radio-Relay Systems Section 5: Digital Signal Processing Sub-System 5716 EN 60835-3-7 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on 1995 CENELEC 0 Satellite Earth Stations Section 7: Figure-of-Merit of Receiving System 5717 EN 60094-2 Magnetic Tape Sound Recording and Reproducing Systems Part 2: Calibration Tapes 1995 CENELEC 0 5718 EN 60835-3-12 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on 1995 CENELEC 0 Satellite Earth Stations Section 12: Overall System Performance 5719 EN 61309 Deep-Fat Fryers for Household Use Methods for Measuring the Performance 1995 CENELEC 0 5720 HD 348 S6 High-Voltage Alternating-Current Circuit-Breakers 1995 CENELEC 0 5721 EN 61327 Helical-Scan Digital Composite Video Cassette Recording System Using 12,65 mm (0,5 in) Magnetic Tape Format D-3 1995 CENELEC 0 5722 EN 61543 Residual current-operated protective devices (RCDs) for household and similar useElectromagnetic compatibility - 1995 CENELEC 0 Incorporates Amendments A11: 2003, A12: 2005 and A2: 2006 5723 EN 134101 Blank Detail Specification: Single turn disc trimmer capacitors (Qualification approval) 1995 CENELEC 0 5724 EN 50109-1 Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio 1995 CENELEC 0 Frequency Applications Part 1: General Requirements and Tests 5725 EN 60835-1-3 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 1: Measurements 1995 CENELEC 0 Common to Terrestrial Radio-Relay Systems and Satellite Earth Stations Section 3: Transmission Characteristics - Incorporates Amendment A1: 1995 5726 EN 61297 Industrial-Process Control Systems Classification of Adaptive Controllers for the Purpose of Evaluation 1995 CENELEC 0 5727 EN 60721-3-7 Classification of Environmental Conditions; Part 3: Classification of Groups of Environmental Parameters and Their 1995 CENELEC 0 Severities; Section 7: Portable and Non-Stationary Use - Incorporates Amendment A1: 1997 5728 EN 60721-3-4 Classification of Environmental Conditions; Part 3: Classification of Groups of Environmental Parameters and Their 1995 CENELEC 0 Severities; Section 4: Stationary Use at Non-Weatherprotected Locations - Incorporates Amendment A1: 1997 5729 EN 134102 Blank Detail Specification: Multi turn concentric capacitors (Qualification approval) 1995 CENELEC 0 5730 EN 60315-7 Methods of Measurement on Radio Receivers for Various Classes of Emission Part 7: Methods of Measurement on Digital 1995 CENELEC 0 Satellite Radio (DSR) Receivers 5731 EN 61249-7-1 Materials for Interconnection Structures Part 7: Sectional Specification Set for Restraining Core Materials Section 1: 1995 CENELEC 0 Copper/Invar/Copper 5732 EN 60835-1-4 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 1: Measurements 1995 CENELEC 0 Common to Terrestrial Radio-Relay Systems and Satellite Earth Stations Section 4: Transmission Performance - Incorporates Amendment A1: 1995 5733 EN 61727 Photovoltaic (PV) Systems Characteristics of the Utility Interface 1995 CENELEC 0 5734 EN 61305-3 Household High-Fidelity Audio Equipment and Systems Methods of Measuring and Specifying the Performance Part 3: 1995 CENELEC 0 Amplifiers 5735 EN 180101 Blank detail specification: Fixed fibre optic attenuators 1995 CENELEC 0 5736 EN 61302 Electrical Insulating Materials Method to Evaluate the Resistance to Tracking and Erosion Rotating Wheel Dip Test 1995 CENELEC 0 5737 EN 60255-21-2 Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests on Measuring Relays and Protection Equipment 1995 CENELEC 0 Section 2: Shock and Bump Tests 5738 EN 61119-5 Digital Audio Tape Cassette System (DAT) Part 5: DAT for Professional Use 1995 CENELEC 0 5739 EN 61262-7 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 7: Determination of the 1995 CENELEC 0 Modulation Transfer Function 5740 EN 60917-2-1 Modular Order for the Development of Mechanical Structures for Electronic Equipment Practices Part 2: Sectional 1995 CENELEC 0 Specification Interface Co-Ordination Dimensions for the 25 mm Equipment Practice Section 1: Detail Specification - Dimensions for Cabinets and 5741 EN 60371-3-3 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 3: Specification 1995 CENELEC 0 for Rigid Mica Materials for Heating Equipment 5742 EN 60317-19 AMD 1 AMD 2 Specifications for Particular Types of Winding Wires Part 19: Solderable Polyurethane Enamelled Round 1995 CENELEC 0 Copper Wire Overcoated with Polyamide, Class 130 - Incorporates Amendments A1: 1998 and A2: 2000 5743 HD 22.6 S2/A1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 6: Arc Welding Cables - Incorporates 1995 CENELEC 0 Amendment A1: 1999 5744 EN 134103 Blank Detail Specification: Vane type air dielectric capacitor (Qualification approval) 1995 CENELEC 0 5745 EN 137101 Blank Detail Specification: Fixed Aluminium Electrolytic a.c. Capacitors with Non-Solid Electrolyte for Motor Starter 1995 CENELEC 0 Applications Qualifications Approval 5746 EN 61094-4 Measurement Microphones Part 4: Specifications for Working Standard Microphones 1995 CENELEC 0 5747 EN 60870-5-5 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 5: Basic Application Functions 1995 CENELEC 0 5748 EN 60371-3-6 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 6: Glass-Backed 1995 CENELEC 0 Mica Paper with a B-Stage Epoxy Resin Binder - Incorporates Amendment A1: 2006 5749 EN 60255-21-1 Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests on Measuring Relays and Protection Equipment 1995 CENELEC 0 Section 1: Vibration Tests (Sinusoidal) 5750 EN Blank Details Specification: Hermetically Sealed Relays for Severe Static Environmental Conditions (116205) for Severe 1995 CENELEC 0 116205/116206/ Mobile Environmental Conditions (116206) for Severe Airborne Environmental Conditions (116207) 116207 5751 EN 134104 Blank Detail Specification: Compression type trimmer capacitors (Qualification approval) 1995 CENELEC 0 5752 EN 61237-3 Broadcast Video Tape Recorders - Methods of Measurement Part 3: Electrical Measurements for Analogue Component 1995 CENELEC 0 Video Signals 5753 EN 134100 Sectional Specification: Variable Capacitors (Qualification Approval) 1995 CENELEC 0 5754 EN 60835-2-9 Methods of Measurement for Equipement Used in Digital Microwave Radio Transmission Systems Part 2: Measurements 1995 CENELEC 0 on Terrestrial Radio-Relay Systems Section 9: Service Channels 5755 EN 61041-3 Non-Broadcast Videotape Recorders Methods of Measurement Part 3: Audio Characteristics for FM Recording 1995 CENELEC 0 5756 EN 61229 Rigid protective covers for live working on a.c. installations - Incorporates Amendments A1: 1998 and A2: 2002 1995 CENELEC 0 5757 HD 22.14 S1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 14: Cords for Applications Requiring High 1995 CENELEC 0 Flexibility 5758 HD 22.2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods 1995 CENELEC 0 S2/A10 5759 EN 60512-15-8 Electomechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 15: 1995 CENELEC 0 Mechanical Tests on Contacts and Terminations - Section 8: Test 15h - Contact Retention System Resistance to Tool Application 5760 EN 60674-3-4 Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheets 4 to 6: 1995 CENELEC 0 TO 6 Requirements for Polyimide Films Used for Electrical Insulation 5761 HD 21.1 S2/ A8 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1994 CENELEC 0 5762 EN 61008-2-1 Residual Current Operated Circuit-Breakers without Integral Overcurrent Protection for Household and Similar Uses 1994 CENELEC 0 - s Functionally Independent of Line Voltage_آs) Part 2-1: Applicability of the General Rules to RCCB_آRCCB) Incorporates Amendment A11: 1998 5763 EN 181102 Blank Detail Specification: Fibre Optic Branching Devices Type: Wavelength Selective Transmissive Star 1994 CENELEC 0 5764 EN 61213 Analogue Audio Recording on Video Tape - Polarity of Magnetization 1994 CENELEC 0 5765 EN 190101 Family Specification: Digital Integrated TTL Circuits Series 54, 64, 74, 84 (CECC 90 101 Issue 2: 1988) 1994 CENELEC 0 5766 HD 586.2 S1 Mineral Insulated Cables with a Rated Voltage not Exceeding 750 V Part 2: Terminations 1994 CENELEC 0 5767 EN 60843-1 Helical-Scan Video Tape Cassette System Using 8mm Magnetic Tape - 8 mm Video Part 1: General Specifications 1994 CENELEC 0 5768 EN 147101 Blank Detail Specification: Relay Sockets of Assessed Quality 1994 CENELEC 0 5769 EN 60094-4 Magnetic Tape Sound Recording and Reproducing Systems Part 4: Mechanical Magnetic Tape Properties - Incorporates 1994 CENELEC 0 Amendment A1: 1994 5770 EN 122190 Sectional Specification: Radio Frequency Coaxial Connectors Series 7-16 1994 CENELEC 0 5771 EN 190108 Family Specification: TTL Advanced Schottky Digital Integrated Circuits Series 54AS, 74AS 1994 CENELEC 0 5772 EN 129201 Blank Detail Specification: Wirewound Inductors with Ceramic or Ferrite Core Assessment Level E 1994 CENELEC 0 5773 EN 134000 Generic Specification: Variable Capacitors (Qualification Approval and Capability Approval) 1994 CENELEC 0 5774 EN 190110 Blank Detail Specification: Digital Microprocessor Integrated Circuits 1994 CENELEC 0 5775 EN 60168 Tests on Indoor and Outdoor Post Insulators of Ceramic Material or Glass for Systems with Nominal Voltages Greater 1994 CENELEC 0 Than 1 kV - Incorporates Amendments A1: 1997 and A2: 2000 5776 EN 60264-2-2 Packaging of winding wires Part 2-2: Cylindrical barrelled delivery spools Specification for returnable spools made from 1994 CENELEC 0 thermoplastic material - Incorporates Amendment A1: 2004 5777 EN 61262-6 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 6: Determination of the 1994 CENELEC 0 Contrast Ratio and Veiling Glare Index 5778 EN 60068-2-17 Environmental Testing Part 2: Tests Test Q: Sealing 1994 CENELEC 0 5779 HD 352.3.4 S1 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 4: Polyester 1994 CENELEC 0 Film-Backed Mica Paper with a B-Stage Epoxy Resin Binder 5780 HD 1002 Independent Gas-Fired Convection Heaters with a Natural Draught Burner and a Permanent Pilot 1994 CENELEC 0 5781 EN 50090-3-1 Home and Building Electronic Systems (HBES) Part 3-1: Aspects of Application Introduction to the Application Structure 1994 CENELEC 0 5782 HD 586.1 S1 Mineral Insulated Cables with a Rated Voltage not Exceeding 750 V Part 1: Cables 1994 CENELEC 0 5783 EN 60835-3-5 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on 1994 CENELEC 0 Satellite Earth Stations Section 5: Up- and Down- Converters 5784 EN 60244-12-2 Methods of Measurement for Radio Transmitters Part 12: Guideline for Drawing up Descriptive Leaflets for Transmitters 1994 CENELEC 0 and Transposers for Sound and Television Broadcasting- Specification Sheets 5785 EN 61293 Marking of Electrical Equipment with Ratings Related to Electrical Supply - Safety Requirements 1994 CENELEC 0 5786 EN 60264-1 Packaging of winding wires - Part 1: Containers for round winding wires - Incorporates Amendment A1: 2009 1994 CENELEC 0 5787 EN 60317-37 No Title 1994 CENELEC 0 5788 EN 60821 IEC 821 VMEbus - Microprocessor system bus for 1 byte to 4 byte data 1994 CENELEC 0 5789 EN 190102 Family Specification: TTL Schottky Digital Integrated Circuits Series 54S, 64S, 74S, 84S 1994 CENELEC 0 5790 EN 61254 Electric Shavers for Household Use - Methods for Measuring the Performance 1994 CENELEC 0 5791 EN 129202 Blank Detail Specification: Wirewound Inductors with Ceramic or Ferrite Core. Assessment Level P 1994 CENELEC 0 5792 EN 60099-1 Surge Arresters - Part 1: Non-Linear Resistor Type Gapped Surge Arresters for A.C. Systems - Incorporates Amendment 1994 CENELEC 0 A1: 1999 5793 EN 60933-4 Audio, Video and Audiovisual Systems - Interconnections and Matching Values Part 4. Connector and Cordset for 1994 CENELEC 0 Domestic Digital Bus (D2B) 5794 EN 61152 Dimensions of Metal-Sheathed Thermometer Elements 1994 CENELEC 0 5795 EN 61119-6 Digital Audio Tape Cassette System (DAT) Part 6: Serial Copy Management System 1994 CENELEC 0 5796 EN 190107 Family Specification: TTL Fast Digital Integrated Circuits Series 54F, 74F 1994 CENELEC 0 5797 EN 61223-2-4 Evaluation and Routine Testing in Medical Imaging Departments Part 2-4: Constancy Tests - Hard Copy Cameras 1994 CENELEC 0 5798 EN 61187 Electrical and Electronic Measuring Equipment - Documentation 1994 CENELEC 0 5799 EN 60264-2-1 Packaging of winding wires Part 2: Cylindrical barrelled delivery spools Section 1: Basic dimensions - Incorporates 1994 CENELEC 0 Amendment A1: 2003 5800 EN 61207-2 Expression of Performance of Gas Analyzers Part 2: Oxygen in Gas (Utilizing High-Temperature Electrochemical Sensors) 1994 CENELEC 0 5801 EN 60774-1 Helical-Scan Video Tape Cassette System Using 12.65 mm (0.5 in) Magnetic Tape on Type VHS Part 1. VHS and 1994 CENELEC 0 Compact VHS Video Cassette System 5802 EN 60352-4 Solderless Connections Part 4: Solderless Non-Accessible Insulation Displacement Connections - General Requirements, 1994 CENELEC 0 Test Methods and Practical Guidance - Incorporates Amendment A1: 2000 5803 EN 60867 Insulating Liquids - Specifications for Unused Liquids Based on Synthetic Aromatic Hydrocarbons 1994 CENELEC 0 5804 EN 60961 Helical-Scan Video Tape Cassette System Using 12.65 mm (0.5 in) Magnetic Tape on Type L 1994 CENELEC 0 5805 EN 61116 Electromechanical Equipment Guide for Small Hydroelectric Installations 1994 CENELEC 0 5806 EN 61168 Radiotherapy Simulators - Functional Performance Characteristics 1994 CENELEC 0 5807 EN 61262-2 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 2: Determination of the 1994 CENELEC 0 Conversion Factor 5808 EN 61198 Mineral Insulating Oils - Methods for the Determination of 2-Furfural and Related Compounds 1994 CENELEC 0 5809 EN 60510-2-6 Methods of Measurement for Radio Equipment Used in Satellite Earth Stations Part 2: Measurements for Sub-Systems 1994 CENELEC 0 Section Six: Frequency Demodulators 5810 EN 60835-2-1 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on 1994 CENELEC 0 Terrestrial Radio- Relay Systems Section 2.1: General 5811 EN 61009-2-1 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO s) 1994 CENELEC 0 Part 2-1: Applicability of the general rules to RCBO s functionally independent of line voltage - Incorporates Amendment A11: 1998 5812 EN 60598-2-25 Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings - 1994 CENELEC 0 Incorporates Amendment A1: 2004 5813 EN 140211 Blank Detail Specification: Fixed Power Resistors - Capability Approval 1994 CENELEC 0 5814 EN 61203 Synthetic Organic Esters for Electrical Purposes Guide for Maintenance of Transformer Esters in Equipment 1994 CENELEC 0 5815 HD 413.2 S2 Operating Conditions for Industrial-Process Measurement and Control Equipment Part 2: Power 1994 CENELEC 0 5816 EN 61262-4 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 4: Determination of the 1994 CENELEC 0 Image Distortion 5817 HD 352.3.5 S1 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 5: Glass-Backed 1994 CENELEC 0 Mica Paper with an Epoxy Resin Binder for Post-Impregnation (VPI) 5818 EN 61086-1 Coatings for loaded printed wire boards (conformal coatings) Part 1: Definitions, classification and general requirements 1994 CENELEC 0 5819 EN 122110 Sectional Specification: Radio Frequency Coaxial Connectors. Series SMA 1994 CENELEC 0 5820 EN 61143-1 Electrical Measuring Instruments - X-t Recorders Part 1: Definitions and Requirements - Incorporates Amendment A1: 1994 CENELEC 0 1997 5821 EN 116203 Blank Detail Specification: Electromechanical All-or-Nothing Relays for Enhanced Industrial Application 1994 CENELEC 0 5822 HD 21.8 S1/ A2 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 8: Single Core Non- Sheathed 1994 CENELEC 0 Cables for Decorative Chains 5823 EN 60244-8 Methods of Measurement for Radio Transmitters Part 8: Performance Characteristics of Vestigial-Sideband Demodulators 1994 CENELEC 0 Used for Testing Television Transmitters and Transposers 5824 EN 61119-1 Digital Audio Tape Cassette System (DAT) Part 1. Dimensions and Characteristics 1994 CENELEC 0 5825 HD 603 S1 Distribution Cables of Rated Voltage 0.6/1 kV 1994 CENELEC 0 5826 EN 61234-1 Method of Test for Hydrolytic Stability of Electrical Insulating Materials Part 1: Plastic Films 1994 CENELEC 0 5827 R105-002 Home and building electronic systems Technical report 2 Guidelines for the professional installation of twisted pair cables 1994 CENELEC 0 class 1 5828 EN 61223-2-5 Evaluation and Routine Testing in Medical Imaging Departments Part Part 2-5: Constancy Test -Image Display Devices 1994 CENELEC 0 5829 EN 60264-2-3 Packaging of winding wires Part 2-3: Cylindrical barrelled delivery spools Specification for non-returnable spools made 1994 CENELEC 0 from thermoplastic material - Incorporates Amendment A1: 2004 5830 EN 61173 Overvoltage Protection for Photovoltaic (PV) Power Generating Systems - Guide 1994 CENELEC 0 5831 EN 122200 Sectional Specification: Radio Frequency Coaxial Connectors. Series TNC 1994 CENELEC 0 5832 EN 61262-5 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 5: Determination of the 1994 CENELEC 0 Detective Quantum Efficiency 5833 EN 61183 Electroacoustics - Random-Incidence and Diffuse-Field Calibration of Sound Level Meters 1994 CENELEC 0 5834 EN 181000 Generic Specification: Fibre Optic Branching Devices 1994 CENELEC 0 5835 EN 60352-3 Solderless Connections Part 3: Solderless Accessible Insulation Displacement Connections - General Requirements, Test 1994 CENELEC 0 Methods and Practical Guidance 5836 EN 60264-3-3 Packaging of winding wires Part 3-3: Taper barrelled delivery spools Specification for non-returnable spools made from 1994 CENELEC 0 thermoplastic material - Incorporates Amendment A1: 2004 5837 HD 21.1 AMD 13 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General 1994 CENELEC 0 S2/A13 Requirements 5838 EN 60917-2 Modular Order for the Development of Mechanical Structures for Electronic Equipment Practices Part 2: Sectional 1994 CENELEC 0 Specification - Interface Co-Ordination Dimensions for the 25 mm Equipment Practice 5839 EN 60264-4-2 Packaging of winding wires Part 4-2: Methods of test Containers made from thermoplastic material for taper barrelled 1994 CENELEC 0 delivery spools - Incorporates Amendment A1: 2004; Incorporating Corrigendum March 2005 5840 EN 190109 Family Specification: Digital Integrated HC MOS Circuits Series HC/HCT/HCU 1994 CENELEC 0 5841 EN 122003 Blank Detail Specification for the Preparation of Customer Detail Specifications (CDS) and Detail Specifications for 1994 CENELEC 0 Standard Production Items with Capability Approval 5842 EN 186130 Sectional Specification: Connector Sets for Optical Fibres and Cables. Type LSA 1994 CENELEC 0 5843 EN 60240-1 Characteristics of Electric Infra-Red Emitters for Industrial Heating Part 1: Short Wave Infra-Red Emitters 1994 CENELEC 0 5844 EN 60510-3-4 Methods of Measurement for Radio Equipment Used in Satellite Earth Stations Part 3: Methods of Measurement on 1994 CENELEC 0 Combinations of Sub- Systems Section Four: Measurements for Frequency Division Multiplex (f.d.m.) Transmission 5845 EN 60317-4 Specifications for Particular Types of Winding Wires Part 4: Solderable Polyurethane Enamelled Round Copper Wire, 1994 CENELEC 0 Class 130 - Incorporates Amendments A1: 1998 and A2: 2000 5846 EN 60835-2-7 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on 1994 CENELEC 0 Terrestrial Radio-Relay Systems Section 7: Diversity Switching and Combining Equipment 5847 EN 60041 Field Acceptance Tests to Determine the Hydraulic Performance of Hydraulic Turbines, Storage Pumps and Pump- 1994 CENELEC 0 Turbines 5848 EN 116204 Blank Detail Specification: Electromechanical All-or-Nothing Sealed Relays for Aggressive Industrial Application 1994 CENELEC 0 5849 EN 60598-2-6 Luminaires Part 2: Particular Requirements Section 6: Luminaires with Built-In Transformers or Converters for Filament 1994 CENELEC 0 Lamps - Incorporates Amendment A1: 1997 5850 EN 61237-1 Broadcast Video Tape Recorders - Methods of Measurement Part 1 : Mechanical Measurments 1994 CENELEC 0 5851 EN 61205 Ultrasonics - Dental Descaler Systems Measurement and Declaration of the Output Characteristics 1994 CENELEC 0 5852 EN 60068-2-66 Environmental Testing Part 2: Test Methods Test Cx: Damp Heat, Steady State (Unsaturated Pressurized Vapour) 1994 CENELEC 0 5853 HD 604 S1 0.6/1 kV Power Cables with Special Fire Performance for Use in Power Stations 1994 CENELEC 0 5854 EN 61119-2 Digital Audio Tape Cassette System (DAT) Part 2: DAT Calibration Tape 1994 CENELEC 0 5855 EN 60510-2-5 Methods of Measurement for Radio Equipment Used in Satellite Earth Stations Part 2: Measurements for Sub-Systems 1994 CENELEC 0 Section Five: Frequency Modulators 5856 EN 181101 Blank Detail Specification: Fibre Optic Branching Devices Type: Non Wavelength Selective Transmissive Star 1994 CENELEC 0 5857 EN 60454-1 Specifications for Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 1: General Requirements 1994 CENELEC 0 5858 EN 129200 Sectional Specification: Fixed Inductors with Ceramic or Ferrite Core Wound with Copper Wire for RF Circuits - 1994 CENELEC 0 Incorporates Amendment A1: 1995 5859 EN 61262-3 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 3: Determination of the 1994 CENELEC 0 Luminance Distribution and Luminance Non-Uniformity 5860 EN 61262-1 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 1: Determination of the 1994 CENELEC 0 Entrance Feild Size 5861 EN 61197 Insulating Liquids - Linear Flame Propagation Test Method Using a Glass-Fibre Tape 1994 CENELEC 0 5862 EN 129102 Blank Detail Specification: Wirewound Surface Mounting Inductors of Assessed Quality. Assessment Level P 1994 CENELEC 0 5863 EN 60835-2-2 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on 1994 CENELEC 0 Terrestrial Radio- Relay Systems Section 2: Antenna 5864 EN 61143-2 Electrical Measuring Instruments - X-t Recorders Part 2: Recommended Additional Test Methods - Incorporates 1994 CENELEC 0 Amendment A1: 1995 5865 EN 60712 Helical-Scan Video-Tape Cassette System Using 19 mm (3/4 in) Magnetic Tape, Known as U-Format - Incorporates 1994 CENELEC 0 Amendment A1: 1994 5866 EN 190103 Family Specification: Digital Integrated TLL Low Power Schottky Circuits Series 54 LS, 64LS, 74LS, 84LS 1994 CENELEC 0 5867 EN 140210 Sectional Specification: Fixed Power Resistors - Capability Approval 1994 CENELEC 0 5868 EN 60244-9 Methods of Measurement for Radio Transmitters Part 9: Performance Characteristics for Television Transposers 1994 CENELEC 0 5869 EN 61119-3 Digital Audio Tape Cassette System (DAT) Part 3: DAT Tape Properties 1994 CENELEC 0 5870 EN 60835-3-10 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on 1994 CENELEC 0 Satellite Earth Stations Section 10: Terminal Equipment - TDMA Traffic Earth Station 5871 EN 60598-2-18 Luminaires Part 2: Particular requirements Section 18: Luminaires for swimming pools and similar applications - 1994 CENELEC 0 Incorporating Corrigendum May 1996; Incorporates Amendment A1: 2012 5872 EN 61043 Electroacoustics - Instruments for the Measurement of Sound Intensity - Measurement with Pairs of Pressure Sensing 1994 CENELEC 0 Microphones 5873 EN 60244-5 Methods of Measurement for Radio Transmitters Part 5: Performance Characteristics of Television Transmitters 1994 CENELEC 0 5874 EN 190106 Family Specification: TTL Advanced Low Power Schottky Digital Integrated Circuits Series 54ALS, 74ALS 1994 CENELEC 0 5875 EN 60244-13 Methods of Measurement for Radio Transmitters Part 13: Performance Characteristics for FM Sound Broadcasting 1993 CENELEC 0 5876 EN 61120-1 Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 1: General 1993 CENELEC 0 Requirements 5877 EN 61079-1 Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 1: Radio-Frequency 1993 CENELEC 0 Measurements on Outdoor Units 5878 EN 60868 Flickermeter - Functional and Design Specifications 1993 CENELEC 0 5879 HD 503 S2 Lamps for Road Vehicles - Performance Requirements 1993 CENELEC 0 5880 EN 60774-3 Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS Part 3: S-VHS 1993 CENELEC 0 5881 HD 493.3 S2 Dimensions of Mechanical Structures of the 482.6 mm (19 in) Series - Part 3: Subracks and Associated Plug-in Units 1993 CENELEC 0 5882 EN 169100 Sectional Specification: Quartz Crystal Controlled Oscillators (Capability Approval) - Remains Current 1993 CENELEC 0 5883 EN 60870-5-4 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 4: Definition and Coding of Application 1993 CENELEC 0 Information Elements 5884 HD 243 S10 Graphical Symbols for Use on Equipment - Index, Survey and Compilation of the Single Sheets (IEC 417:1973 + 417A: 1993 CENELEC 0 1974 to 417K:1991) 5885 EN 147100 Sectional Specification: Relay Sockets of Assessed Quality 1993 CENELEC 0 5886 EN 186230 Sectional Specification: Connector Sets for Optical Fibres and Cables Type LSF 1993 CENELEC 0 5887 EN 60721-3-0 Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their 1993 CENELEC 0 Severities Introduction 5888 HD 311.2 S3 Magnetic Tape Sound Recording and Reproducing Systems Part 2: Calibration Tapes 1993 CENELEC 0 5889 EN 60244-12-1 Methods of Measurement for Radio Transmitters Part 12: Guideline for Drawing up Descriptive Leaflets for Transmitters 1993 CENELEC 0 and Transposers for Sound and Television Broadcasting - Characteristics to be Specified 5890 EN 60068-3-3 Environmental Testing Part 3: Guidance Seismic Test Methods for Equipments 1993 CENELEC 0 5891 EN 168200 Sectional Specification: Quartz Crystal Units (Qualification Approval) - Incorporates Amendment A1: 1993 1993 CENELEC 0 5892 EN 60382 Analogue Pneumatic Signal for Process Control Systems 1993 CENELEC 0 5893 EN 122140 Sectional Specification: Radio Frequency Coaxial Connectors. Series SMC 1993 CENELEC 0 5894 EN 60068-2-61 Environmental Testing Part 2: Test Methods Test Z/ABDM: Climatic Sequence 1993 CENELEC 0 5895 EN 147000 Generic Specification: Sockets for Use with Electrical Relays of Assessed Quality 1993 CENELEC 0 5896 EN 60604 Topflash/Flipflash Photographic Flash Lamp Array 1993 CENELEC 0 5897 EN 60682 Standard Method of Measuring the Pinch Temperature of Quartz- Tungsten-Halogen Lamps - Incorporates Amendment 1993 CENELEC 0 A2: 1997 5898 HD 483.10 S1 Sound System Equipment Part 10: Peak Programme Level Meters 1993 CENELEC 0 5899 EN 60719 Calculation of the Lower and Upper Limits for the Average Outer Dimensions of Cables with Circular Copper Conductors 1993 CENELEC 0 and of Rated Voltages up to and Including 450/750 V 5900 EN 60169-24 Radio-Frequency Connectors Part 24: Radio-Frequency Coaxial Connectors with Screw Coupling, Typically for Use in 75 1993 CENELEC 0 ohm Cable Distribution Systems (Type F) 5901 EN 60574-21 Audiovisual, Video and Television Equipment and Systems Part 21: Video Tape Leader and Trailer for Education and 1993 CENELEC 0 Training Applications 5902 HD 490.2 S2 Methods of Test for Winding Wires Part 2: Determination of Dimensions 1993 CENELEC 0 5903 EN 60721-3-9 Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their 1993 CENELEC 0 Severities Section 9: Microclimates Inside Products - Incorporates Amendment A1: 1995 5904 EN 122120 Sectional Specification: Radio Frequency Coaxial Connectors Series BNC 1993 CENELEC 0 5905 EN 122160 Sectional Specification: Radio Frequency Coaxial Connectors. Series SSMA 1993 CENELEC 0 5906 EN 60244-11 Methods of Measurement for Radio Transmitters Part 11: Transposers for FM Sound Broadcasting 1993 CENELEC 0 5907 EN 60619 Electrically operated food preparation appliances Methods for measuring the performance - Incorporates Amendments A1: 1993 CENELEC 0 1995 and A2: 2004 5908 EN 61065 Method for Evaluating the Low Temperature Flow Properties of Mineral Insulating Oils After Ageing 1993 CENELEC 0 5909 EN 116303 Blank Detail Specification: Electromechanical All- Or-Nothing Heavy Load Relays of Assessed Quality (Hermetically 1993 CENELEC 0 Sealed, 5 A to 25 A) 5910 HD 523.3.116 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 1993 CENELEC 0 TO 118 S1 116 to 118: Extruded Polychloroprene, General Purpose 5911 EN 60045-1 Steam Turbines Part 1: Specifications 1993 CENELEC 0 5912 HD 490.3 S3 Methods of Test for Winding Wires Part 3: Mechanical Properties 1993 CENELEC 0 5913 EN 60097 Grid Systems for Printed Circuits - Incorporating Corrigendum January 1993 1993 CENELEC 0 5914 HD 21.1 S2/ Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1993 CENELEC 0 A12 5915 EN 60143 Series Capacitors for Power Systems Part 1: General - Performance, Testing and Rating - Safety Requirements - Guide 1993 CENELEC 0 Installation 5916 EN 61030 Audio, Video and Audiovisual Systems Domestic Digital Bus (D2B) 1993 CENELEC 0 5917 EN 61106 Videodisks - Methods of Measurements for Parameters 1993 CENELEC 0 5918 EN 60061-2 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - 1993 CENELEC 0 Incorporates Amendment A50: 2015 5919 EN 60721-3-6 Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their 1993 CENELEC 0 Severities Ship Environment - Incorporates Amendment A2: 1997 5920 EN 60835-2-10 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on 1993 CENELEC 0 Terrestrial Radio- Relay Systems Section Ten - Overall System Performance 5921 EN 60856 Pre-Recorded Optical Reflective Videodisk System `Laser Vision 50 Hz/625 Lines - PAL - Incorporates Amendments A1: 1993 CENELEC 0 1993 and A2: 1997 5922 EN 61166 High-Voltage Alternating Current Circuit-Breakers Guide for Seismic Qualification of High- Voltage Alternating Current 1993 CENELEC 0 Circuit- Breakers 5923 HD 483.12 S2 Sound System Equipment Part 12: Application of Connectors for Broadcast and Similar Use 1993 CENELEC 0 5924 EN 60870-5-2 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 2: Link Transmission Procedures 1993 CENELEC 0 5925 EN 129100 Sectional Specification: Wirewound Surface Mounting Inductors - Incorporates Amendment A1: 1995 1993 CENELEC 0 5926 EN 60564 D.C. Bridges for Measuring Resistance - Incorporates Amendment A2: 1997 1993 CENELEC 0 5927 EN 61144 Test Method for the Determination of Oxygen Index of Insulating Liquids 1993 CENELEC 0 5928 HD 523.3.420 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 1993 CENELEC 0 TO 422 S1 420 to 422: Polyethylene Terephthalate Textile with Acrylic Based Coating 5929 HD 21.10 S1 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 10: Extensible Leads 1993 CENELEC 0 5930 HD 555.0.1 S2 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 1 - Enamelled Round Copper 1993 CENELEC 0 Wire 5931 EN 60969 Self-Ballasted Lamps for General Lighting Services - Performance Requirements - Incorporates Amendments A1: 1993 1993 CENELEC 0 and A2: 2000 5932 HD 523.3.400 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 1993 CENELEC 0 TO 402 S1 400 to 402: Glass Textile Sleeving with Silicone Elastomer Coating 5933 EN 61122 Still Video Floppy Disc Magnetic Recording System 1993 CENELEC 0 5934 EN 60870-5-1 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section One: Transmission Frame Formats 1993 CENELEC 0 5935 EN 60801-2 Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 2: Electrostatic Discharge 1993 CENELEC 0 Requirements 5936 EN 61079-2 Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 2: Electrical 1993 CENELEC 0 Measurements on DBS Tuner Units 5937 EN 122002 Blank Detail Specification: Radio Frequency Coaxial Connectors 1993 CENELEC 0 5938 HD 53.8 S4 Rotating Electrical Machines Part 8: Terminal Markings and Direction of Rotation of Rotating Machines 1993 CENELEC 0 5939 EN 130200 Sectional Specification: Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte - Incorporates Amendment A3: 1993 CENELEC 0 1998 5940 EN 61120-3 Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 3: Format B 1993 CENELEC 0 5941 EN 60169-23 Radio-Frequency Connectors Part 23: Pin and Socket Connector for Use with 3,5 mm Rigid Precision Coaxial Lines with 1993 CENELEC 0 Inner Diameter of Outer Conductor 3,5 mm (0,1378 in) 5942 EN 61120-2 Digital Audio Tape Recorder Reel to Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 2: Format A 1993 CENELEC 0 5943 EN 61118 Helical-Scan Video Tape Cassette Using 12,65 mm (0,5 in) Magnetic Tape - Type M2 1993 CENELEC 0 5944 EN 122130 Sectional Specification: Radio Frequency Coaxial Connectors. Series SMB 1993 CENELEC 0 5945 EN 60061-1 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps - 1993 CENELEC 0 Incorporates Amendment A57: 2018 5946 EN 60868-0 Flickermeter Part 0: Evaluation of Flicker Severity 1993 CENELEC 0 5947 EN 60756 Non-Broadcast Video Tape Recorders Time Base Stability 1993 CENELEC 0 5948 HD 22.2 S2/ A9 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods 1993 CENELEC 0 5949 EN 61049 Capacitors for Use in Tubular Fluorescent and Other Discharge Lamp Circuits Performance Requirements 1993 CENELEC 0 5950 EN 169101 Blank Detail Specification: Quartz Crystal Controlled Oscillators (Capability Approval) - Remains Current 1993 CENELEC 0 5951 EN 50077 Low-Profile Connector for Implantable Cardiac Pacemakers - Incorporating Corrigendum November 1993 1993 CENELEC 0 5952 EN 60933-5 Audio, Video and Audiovisual Systems Interconnections and Matching Values Part 5: Y/C Connector for Video Systems - 1993 CENELEC 0 Electrical Matching Values and Description of the Connector 5953 EN 60524 Direct-Current Resistive Volt Ratio Boxes - Incorporates Amendment A2: 1997 1993 CENELEC 0 5954 EN 61115 Expression of Performance of Sample Handling Systems for Process Analyzers 1993 CENELEC 0 5955 EN 61075 Loran-C Receivers for Ships - Minimum Performance Standards - Methods of Testing and Required Test Results 1993 CENELEC 0 5956 EN 61064 Acceptance Tests for Steam Turbine Speed Control Systems 1993 CENELEC 0 5957 EN 60244-10 Methods of Measurement for Radio Transmitters Part 10 : Methods of Measurement for Television Transmitters and 1993 CENELEC 0 Transposers Employing Insertion Test Signals 5958 EN 60146-1-3 Semiconductor Convertors General Requirements and Line Commutated Convertors Part 1-3: Transformers and Reactors - 1993 CENELEC 0 Remains Current 5959 EN 60835-1-2 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 1: Measurements 1993 CENELEC 0 Common to Terrestrial Radio-Relay Systems and Satellite Earth Stations Section 2: Basic Characteristics - Incorporates Amendment A1: 1995 5960 EN 60034-7 Rotating Electrical Machines - Part 7: Classification of Types of Construction, Mounting Arrangements and Twerminal 1993 CENELEC 0 Box Position (IM Code) - Incorporates Amendment A1: 2001 5961 HD 21.1 S2/ A9 AMD 9 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General 1993 CENELEC 0 Requirements 5962 EN 60094-1 Magnetic Tape Sound Recording and Reproducing Systems Part 1: General Conditions and Requirements - Incorporates 1993 CENELEC 0 Amendment A1: 1994 5963 EN 60061-3 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Incorporates 1993 CENELEC 0 Amendment A51: 2015 5964 HD 555.0.4 S2 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 4: Glass-Fibre Wound Bare or 1993 CENELEC 0 Enamelled Rectangular Copper Wire 5965 HD 395.1 S2/ AMD 1 Medical Electrical Equipment Part 1: General Requirements for Safety 1993 CENELEC 0 A1 5966 EN 122001 Blank Detail Specification: CECC Military Specification for Radio Frequency Connectors (Type MIL-C- 39012) 1993 CENELEC 0 5967 EN 60843-3 Helical-Scan Video Tape Cassette System Using 8 mm Magnetic Tape - 8 mm Video Part 3: High- Band Specifications for 1993 CENELEC 0 Hi 8 5968 EN 61105 Reference Tapes for Video Tape Recorder Systems 1993 CENELEC 0 5969 EN 122170 Sectional Specification: Radio Frequency Coaxial Connectors. Series SSMB 1993 CENELEC 0 5970 EN 61179 Helical-Scan Digital Composite Video Cassette Recording System Using 19 mm Magnetic Tape, Format D2 (NTSC, PAL, 1993 CENELEC 0 PAL-M) 5971 HD 523.3.240 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 1993 CENELEC 0 TO 243 S1 240 to 243: Heat-Shrinkable PTFE Sleeving 5972 EN 129000 Generic Specification: Fixed RF Wound Inductors - Incorporates Amendment A1: 1995 1993 CENELEC 0 5973 HD 352.3.2 S1 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 2: Mica Paper 1993 CENELEC 0 5974 HD 555.0.2 S2 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 2 - Enamelled Rectangular 1993 CENELEC 0 Copper Wire 5975 EN 61079-5 Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 5: Electrical 1993 CENELEC 0 Measurements on Decoder Units for MAC/Packet Systems 5976 EN 60835-2-3 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on 1993 CENELEC 0 Terrestrial Radio-Relay Systems Section 3: RF Branching Networks 5977 EN 122150 Sectional Specification: Radio Frequency Coaxial Connectors Series EIA Flange 1993 CENELEC 0 5978 ENV 190000-6 Generic Specification: Monolithic Integrated Circuits Procedure for Approval and Quality Management 1993 CENELEC 0 5979 EN 61219 Live Working - Earthing or Earthing and Short- Circuiting Equipment Using Lances as a Short- Circuiting Device - Lance 1993 CENELEC 0 Earthing 5980 EN 61176 Hand-Held Electric Mains Voltage Operated Circular Saws - Methods for Measuring the Performance 1993 CENELEC 0 5981 EN 60654-1 Industrial-Process Measurement and Control Equipment - Operating Conditions Part 1: Climatic Conditions 1993 CENELEC 0 5982 EN 186220 Sectional Specification: Connector Sets for Optical Fibres and Cables Type LSC 1993 CENELEC 0 5983 EN 60835-2-8 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on 1993 CENELEC 0 Terrestrial Radio-Relay Systems Section 8: Adaptive Equalizer - Incorporates Amendment A1: 1996 5984 HD 553 S2 Current Transformers 1993 CENELEC 0 5985 EN 60169-25 Radio-Frequency Connectors Part 25: Two-Pole Screw (3/4-20 UNEF) Coupled Connectors for Use with Shielded 1993 CENELEC 0 Balanced Cables Having Twin Inner Conductors with Inner Diameter of Outer Conductor 13,56 mm (0,534 in) (Type TWHN) 5986 EN 116300 Sectional Specification: Electromechanical All- or-Nothing Heavy Load Relays of Assessed Quality (Rated from 5 A and 1993 CENELEC 0 Above) 5987 EN 190116 Family Specification: AC MOS Digital Integrated Circuits 1993 CENELEC 0 5988 EN 190100 Sectional Specification: Digital Monolithic Integrated Circuits 1993 CENELEC 0 5989 EN 61079-3 Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 3: Electrical 1993 CENELEC 0 Measurements of Overall Performance of Receiver Systems Comprising an Outdoor Unit and a DBS Tuner Unit 5990 EN 60523 Direct-Current Potentiometers - Incorporates Amendment A2: 1997 1993 CENELEC 0 5991 EN 60094-7 Magnetic Tape Sound Recording and Reproducing Systems Part 7: Cassette for Commercial Tape Records and Domestic 1993 CENELEC 0 Use - Incorporates Amendment A1: 1996 5992 EN 60034-6 Rotating Electrical Machines Part 6: Methods of Cooling (IC Code) 1993 CENELEC 0 5993 EN 129101 Blank Detail Specification: Wirewound Surface Mounting Inductors of Assessed Quality Assessment Level E (+A1 August 1993 CENELEC 0 1994) 5994 HD 483.2 S2 Sound System Equipment Part 2: Explanation of General Terms and Calculation Methods 1993 CENELEC 0 5995 EN 60094-5 Magnetic Tape Sound Recording and Reproducing Systems Part 5: Electrical Magnetic Tape Properties - Incorporates 1993 CENELEC 0 Amendment A1: 1996 5996 EN 122180 Sectional Specification: Radio Frequency Coaxial Connectors Series SSMC 1993 CENELEC 0 5997 EN 60068-2-7 Basic Environmental Testing Procedures Part 2: Tests Test Ga and Guidance: Acceleration, Steady State 1993 CENELEC 0 5998 EN 168100 Sectional Specification: Quartz Crystal Units (Capability Approval) - Incorporates Amendments A1 and A2: 1993 1993 CENELEC 0 5999 EN 61096 Methods of Measuring the Characteristics of Reproducing Equipment for Digital Audio Compact Discs - Incorporates 1993 CENELEC 0 Amendment A1: 1996 6000 HD 555.0.3 S1 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 3: Enamelled Round 1992 CENELEC 0 Aluminium Wire 6001 EN 123500 Sectional Specification: Flexible Printed Boards with Through Connections - Incorporates Amendment A2: 1995 1992 CENELEC 0 6002 HD 22.4 S2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 4: Cords and Flexible Cables (Reprint 1992 CENELEC 0 Incorporating A1 to A5) 6003 HD 53.1 S2/ A3 AMD 3 Rotating Electrical Machines - Part 1: Rating and Performance 1992 CENELEC 0 6004 EN 60068-2-45 Basic Safety Publication - Environmental testing Part 2: Test methods Test XA and guidance: immersion in cleaning 1992 CENELEC 0 solvents - Incorporates Amendment A1: 1993 6005 HD 555.31 S1 Specifications for Particular Types of Winding Wires Part 31: Glass-Fibre Wound, Polyester or Polyesterimide Varnish- 1992 CENELEC 0 Treated, Bare or Enamelled Rectangular Copper Wire, Temperature Index 180 6006 EN 61050 Transformers for Tubular Discharge Lamps Having a No-Load Output Voltage Exceeding 1000 V (Generally Called Neon- 1992 CENELEC 0 Transformers) General and Safety Requirements - Incorporating corrigendum March 1992; Incorporates Amendment A1: 1995 6007 EN 136000 Generic Specification: Magnetrons 1992 CENELEC 0 6008 HD 282 S1/A1 AMD 1 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Instantaneous Water 1992 CENELEC 0 Heaters 6009 HD 555.23 S2 Specifications for Particular Types of Winding Wires Part 23: Solderable Polyesterimide Enamelled Round Copper Wire, 1992 CENELEC 0 Class 180 6010 EN 123200 Sectional Specification: Single and Double Sided Printed Boards with Plated-Through Holes 1992 CENELEC 0 6011 HD 593.1 S1 Microprocessor System Bus - 8-Bit and 16-Bit Data (MULTIBUS I) Part 1: Functional Description with Electrical and 1992 CENELEC 0 Timing Specifications 6012 HD 395.2.11 S2 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Gamma Beam Therapy Equipment 1992 CENELEC 0 6013 HD 546.4 S1 Telecontrol Equipment and Systems Part 4: Performance Requirements 1992 CENELEC 0 6014 EN 169000 Generic Specification: Quartz Crystal Controlled Oscillators - Incorporates Amendment A1: 1998; Remains Current 1992 CENELEC 0 6015 HD 539 S2 Reactors 1992 CENELEC 0 6016 EN 120007 Blank Detail Specification: Liquid Crystal Displays Monochrome LCDs without Electronic Circuit 1992 CENELEC 0 6017 EN 135001 Blank Detail Specification: C.W. Power Amplifier Travelling Wave Tubes up to 500 Watts 1992 CENELEC 0 6018 HD 46.2.2 S1 Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery Spools Section 2: Specification for Returnable Spools 1992 CENELEC 0 Made from Thermoplastic Material 6019 EN 60984 Sleeves of insulating material for live working - Incorporates Amendments A11: 1997 and A1: 2002 1992 CENELEC 0 6020 EN 120001 Blank Detail Specification: Light Emitting Diodes, Light Emitting Diode Arrays, Light Emitting Diode Displays Without 1992 CENELEC 0 Internal Logic and Resistor 6021 HD 619 S1 Non-Broadcast Video Tape Recorders - Methods of Measurement Part 1: General Video (NTSC/PAL) and Audio 1992 CENELEC 0 (Longitudinal) Characteristics 6022 EN 120004 Blank Detail Specification: Ambient Rated Photocouplers with Phototransistor Output 1992 CENELEC 0 6023 HD 548.3 S1 Instrument Transformers Part 3: Combined Transformers 1992 CENELEC 0 6024 EN 123400 Sectional Specification: Flexible Printed Boards Without Through Connections 1992 CENELEC 0 6025 HD 46.3.2 S1 Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section 2: Specification for Returnable Spools Made 1992 CENELEC 0 from Thermoplastic Material 6026 HD 506 S1/A1 AMD 1 Bushings for Liquid Transformers Above 1kv up to 33kv 1992 CENELEC 0 6027 HD 466.6 S2 Methods of Measurement for Radio Equipment Used in the Mobile Services Part 6: Selective- Calling and Data Equipment 1992 CENELEC 0 6028 HD 615 S1 D.C. Bridges for Measuring Resistance 1992 CENELEC 0 6029 HD 553 S1 Current Transformers 1992 CENELEC 0 6030 EN 123400-800 Capability Detail Specification: Flexible Printed Boards Without Through Connections 1992 CENELEC 0 6031 HD 21.7 S1/ A1 AMD 1 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 7: Single Core Non- 1992 CENELEC 0 Sheathed Cables for Internal Wiring for a Conductor Temperature of 90 Degrees Celsius 6032 HD 143.3 S2 Packaging of Components for Automatic Handling Part 3: Packaging of Leadless Components on Continuous Tapes 1992 CENELEC 0 6033 HD 46.3.4 S1 Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section 4: Basic Dimensions of Containers for Taper 1992 CENELEC 0 Barrelled Delivery Spools 6034 HD 606.1 S1 Measurement of Smoke Density of Electric Cables Burning Under Defined Conditions Part 1: Test Apparatus 1992 CENELEC 0 6035 HD 186 S2/A1 AMD 1 Marking by Inscription for the Identification of Cores of Electric Cables Having More Than 5 Cores 1992 CENELEC 0 6036 EN 136001 Blank Detail Specification: Pulsed Magnetrons (Excluding Frequency Agile Magnetrons) 1992 CENELEC 0 6037 HD 555.33 S1 Specifications for Particular Types of Winding Wires Part 33: Glass-Fibre Wound, Silicone Varnish-Treated, Bare or 1992 CENELEC 0 Enamelled Rectangular Copper Wire, Temperature Index 200 6038 HD 555.16 S2 Specifications for Particular Types of Winding Wires Part 16: Polyester Enamelled Rectangular Copper Wire, Class 155 1992 CENELEC 0 6039 EN 61120-4 Digital Audio Tape Recorder Reel-to-Reel System, Using 6,3 mm Magnetic Tape, for Professional Use Part 4: Magnetic 1992 CENELEC 0 Tape Properties: Definitions and Methods of Measurement 6040 HD 1004 Mobile Access and Working Towers Made of Prefabricated Elements - Materials, Dimensions, Design Loads and Safety 1992 CENELEC 0 Requirements 6041 HD 22.7 S1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 7: Cables with Increased Heat Resistance 1992 CENELEC 0 for Internal Wiring for a Conductor Temperature of 110 Degrees C (Reprint Incorporating A1) 6042 HD 539 S2 CORRIGENDUM Reactors 1992 CENELEC 0 CORR 1 6043 HD 323.2.58 S1 Environmental Testing - Part 2: Tests Test Td: Solderability, Resistance to Dissolution of Metallization and to Soldering 1992 CENELEC 0 Heat of Surface Mounting Devices (SMD) 6044 HD 477.3 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems Part 3: Simulated Systems 1992 CENELEC 0 6045 HD 395.2.20 S1 Medical Electrical Equipment Part 2: Particular Requirements for Safety of Transport Incubators 1992 CENELEC 0 6046 HD 22.1 S2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements (Reprint 1992 CENELEC 0 Incorporating A1 to A10) 6047 HD 555.22 S2 Specifications for Particular Types of Winding Wires Part 22: Polyester or Polyesterimide Enamelled Round Copper Wire 1992 CENELEC 0 Overcoated with Polyamide, Class 180 6048 EN 120003 Blank Detail Specification: Phototransistors, Photodarlington Transistors, Phototransistor Arrays 1992 CENELEC 0 6049 HD 483.17 S1 Sound System Equipment Part 17: Standard Volume Indicators 1992 CENELEC 0 6050 HD 313.2.14 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No. 14: Phenolic Cellulose Paper Copper-Clad 1992 CENELEC 0 Laminated Sheet of Defined Flammability (Vertical Burning Test), Economic Quality 6051 HD 22.4 S2/ A6 AMD 6 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 4: Cords and Flexible Cables 1992 CENELEC 0 6052 EN 120002 Blank Detail Specification: Infrared Emitting Diodes, Infrared Emitting Diode Arrays 1992 CENELEC 0 6053 HD 22.1 S2/ AMD 13 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1992 CENELEC 0 A13 6054 HD 555.4 S2 Specifications for Particular Types of Winding Wires Part 4: Solderable Polyurethane Enamelled Round Copper Wire, 1992 CENELEC 0 Class 130 6055 HD 555.19 S2 Specifications for Particular Types of Winding Wires Part 19: Solderable Polyurethane Enamelled Round Copper Wire 1992 CENELEC 0 Overcoated with Polyamide, Class 130 6056 HD 608 S1 Generic Specification for Symmetric Pair/Quad and Multicore Cables for Digital Communication 1992 CENELEC 0 6057 HD 612 S1 Standard Cells 1992 CENELEC 0 6058 HD 22.9 S1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750V - Part 9: Single Core Non-Sheathed Cables for 1992 CENELEC 0 Fixed Wiring Low Emission of Smoke and Corrosive Gases 6059 HD 22.2 S2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods (Reprint Incorporating A1 1992 CENELEC 0 to A4) 6060 HD 400.3M S2 Hand-Held Motor Operated Tools Part II: Particular Specifications Section M: Planers 1992 CENELEC 0 6061 HD 555.34 S1 Specifications for Particular Types of Winding Wires Part 34: Polyester Enamelled Round Copper Wire, Class 130 1992 CENELEC 0 6062 HD 494 S3 Lamps for Road Vehicles - Dimensional, Electrical and Luminous Requirements 1992 CENELEC 0 6063 HD 611.5 S1 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 5: Guidelines for the 1992 CENELEC 0 Application of Thermal Endurance Characteristics 6064 HD 22.8 S1/ A2 AMD 2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 8: Polychloroprene or Equivalent 1992 CENELEC 0 Synthetic Elastomer Sheathed Cables for Use as Decorative Chains 6065 HD 593.2 S1 Microprocessor System Bus - 8-Bit and 16-Bit Data (MULTIBUS I) Part 2: Mechanical and Pin Descriptions for the 1992 CENELEC 0 System Bus Configuration, with Edge Connectors (Direct) 6066 HD 597 S1 CORRIGENDUM Coupling Capacitors and Capacitor Dividers 1992 CENELEC 0 CORR 1 6067 EN 61040 Power and Energy Measuring Detectors, Instruments and Equipment for Laser Radiation 1992 CENELEC 0 6068 HD 597 S1 Coupling Capacitors and Capacitor Dividers 1992 CENELEC 0 6069 EN 123300 Sectional Specification: Multilayer Printed Boards - Incorporates Amendment A1: 1995 1992 CENELEC 0 6070 HD 593.3 S1 CORRIGENDUM Microprocessor System BUS I, 8-Bit and 16-Bit Data Part 3: Mechanical and Pin Descriptions for the 1992 CENELEC 0 Eurocard Configuration with Pin and Socket (Indirect) Connectors 6071 EN 135000 Generic Specification: Travelling Wave Amplifier Tubes 1992 CENELEC 0 6072 EN 50066 Mini-Couplers for the Interconnection of Electrical Mains Supplied Equipment in Road Vehicles 1992 CENELEC 0 6073 EN 60061-4 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general 1992 CENELEC 0 information - Incorporates Amendment A14: 2011 6074 EN 60835-1-1 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 1: Measurements 1992 CENELEC 0 Common to Terrestrial Radio-Relay Systems and Satellite Earth Stations Section One: General 6075 HD 400.3R S1 Hand-Held Motor Operated Tools Part 3: Particular Specifications Section R: Trimmers 1992 CENELEC 0 6076 HD 555.18 S2 Specifications for Particular Types of Winding Wires Part 18: Polyvinyl Acetal Enamelled Rectangular Copper Wire, Class 1992 CENELEC 0 120 6077 HD 21.1 S2/ A7 AMD 7 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General 1992 CENELEC 0 Requirements 6078 HD 600 S1 Marine Speed and Distance Measuring Equipment (SDME) - Operational and Performance Requirements Methods of 1992 CENELEC 0 Testing and Required Test Results 6079 HD 598 S1 Test Methods for Direct Arc Furnaces 1992 CENELEC 0 6080 EN 50094 Access Control System for the MAC/Packet Family: EUROCRYPT - Incorporates Amendment A1: 1995 1992 CENELEC 0 6081 EN 136002 Blank Detail Specification: C.W. Magnetrons for RF Heating or Cooking Applications 1992 CENELEC 0 6082 HD 53.14 S1 Rotating Electrical Machines Part 14: Mechanical Vibration of Certain Machines with Shaft Heights 56 mm and Higher - 1992 CENELEC 0 Measurement, Evaluation and Limits of the Vibration Severity 6083 EN 61044 Opportunity-Charging of Lead-Acid Traction Batteries 1992 CENELEC 0 6084 HD 53.12 S1/ AMD 1 Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors 1992 CENELEC 0 A1 for Voltages up to and Including 660 V, 50 Hz 6085 HD 606.2 S1 Measurement of Smoke Density of Electric Cables Burning Under Defined Conditions Part 2: Test Procedure and 1992 CENELEC 0 Requirements 6086 HD 283 S1 Safety of Household and Similar Electrical Appliances Particular Requirement for the Maximum Temperature Allowed for 1992 CENELEC 0 the Surfaces of Air-Outlet Grilles of Thermal Storage Room Heating Appliances 6087 HD 555.8 S2 Specifications for Particular Types of Winding Wires Part 8: Polyesterimide Enamelled Round Copper Wire, Class 180 1992 CENELEC 0 6088 EN 112000 Generic Specification: Image Converter and Image Intensifier Tubes 1992 CENELEC 0 6089 HD 555.30 S1 Specifications for Particular Types of Winding Wires Part 30: Polyimide Enamelled Rectangular Copper Wire, Class 220 1992 CENELEC 0 6090 HD 46.2.3 S1 Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery Spools Section 3: Specification for Non-Returnable 1992 CENELEC 0 Spools Made from Thermoplastic Material 6091 EN 60933-3 Audio, Video and Audiovisual Systems Interconnections and Matching Values Part 3: Interface for the Interconnection of 1992 CENELEC 0 ENG Cameras and Portable VTRs Using Non-Composite Signals, for 625 Line/50 Field Systems 6092 EN 120005 Blank Detail Specification: Photodiodes, Photodiode- Arrays (Not Intended for Fibre Optic Applications) 1992 CENELEC 0 6093 HD 22.2 S2/ A6 AMD 6 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods 1992 CENELEC 0 6094 HD 395.2.17 S1 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Remote-Controlled Automatically-Driven 1992 CENELEC 0 Gamma-Ray Afterloading Equipment 6095 EN 61100 Classification of Insulating Liquids According to Fire Point and Net Calorific Value 1992 CENELEC 0 6096 HD 555.20 S2 Specifications for Particular Types of Winding Wires Part 20: Solderable Polyurethane Enamelled Round Copper Wire, 1992 CENELEC 0 Class 155 6097 HD 555.26 S2 Specifications for Particular Types of Winding Wires Part 26: Polyamide-Imide Enamelled Round Copper Wire, Class 200 1992 CENELEC 0 6098 HD 367 S2 On-Load Tap-Changers 1992 CENELEC 0 6099 HD 505.4.2 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 4: Methods Specific to Polyethylene 1992 CENELEC 0 and Polypropylene Compounds Section Two - Elongation at Break After Pre-Conditioning - Wrapping Test After Thermal Ageing in Air - Measu 6100 EN 123500-800 Capability Detail Specification: Flexible Printed Boards with Through Connections 1992 CENELEC 0 6101 HD 555.13 S2 Specifications for Particular Types of Winding Wires Part 13: Polyester or Polyesterimide Overcoated with Polyamide- 1992 CENELEC 0 Imide Enamelled Round Copper Wire, Class 200 6102 HD 555.0.2 S1 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 2: Enamelled Rectangular 1992 CENELEC 0 Copper Wire 6103 HD 555.0.4 S1 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 4: Glass-Fibre Wound Bare or 1992 CENELEC 0 Enamelled Rectangular Copper Wire 6104 R105-001 Home and building electronic systems Technical report 1 Applications and requirements - Class 1 1992 CENELEC 0 6105 HD 555.25 S2 Specifications for Particular Types of Winding Wires Part 25: Polyester or Polyesterimide Overcoated with Polyamide- 1992 CENELEC 0 Imide Enamelled Round Aluminium Wire, Class 200 6106 HD 555.0.1 S1 Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 1 - Enamelled Round Copper 1992 CENELEC 0 Wire 6107 EN 50089 Cast Resin Partitions for Metal Enclosed Gas-Filled High Voltage Switchgear and Controlgear 1992 CENELEC 0 6108 EN 60994 Guide for Field Measurement of Vibrations and Pulsations in Hydraulic Machines (Turbines, Storage Pumps and Pump- 1992 CENELEC 0 Turbines) 6109 HD 498 S2 Flickermeter - Functional and Design Specifications 1992 CENELEC 0 6110 EN 168101 Blank Detail Specification: Quartz Crystal Units (Capability Approval) 1992 CENELEC 0 6111 HD 555.27 S2 Specifications for Particular Types of Winding Wires Part 27: Paper Covered Rectangular Copper Wire 1992 CENELEC 0 6112 HD 483.15 S4 Sound System Equipment Part 15: Preferred Matching Values for the Interconnection of Sound System Components 1992 CENELEC 0 6113 HD 555.32 S1 Specifications for Particular Types of Winding Wires Part 32: Glass-Fibre Wound, Polyester or Polyesterimide Varnish- 1992 CENELEC 0 Treated, Bare or Enamelled Rectangular Copper Wire, Temperature Index 155 6114 HD 22.3 S2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Heat Resistant Silicone Rubber Insulated 1992 CENELEC 0 Cables (Reprint Incorporating A1) 6115 HD 555.7 S2 Specifications for Particular Types of Winding Wires Part 7: Polyimide Enamelled Round Copper Wire, Class 220 1992 CENELEC 0 6116 EN 60343 Recommended Test Methods for Determining the Relative Resistance of Insulating Materials to Breakdown by Surface 1992 CENELEC 0 Discharges 6117 HD 560.3 S1 Methods of Measurement on Radio Receivers for Various Classes of Emission Part 3: Receivers for Amplitude-Modulated 1992 CENELEC 0 Sound-Broadcasting Emissions 6118 EN 175100 Sectional Specification: Two Part and Edge Socket Connectors for Printed Board Application 1992 CENELEC 0 6119 HD 505.5.1 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 5: Methods Specific to Filling 1992 CENELEC 0 Compounds Section One: Drop-Point - Separation of Oil Lower Temperature Brittleness - Total Acid Number Absence of Corrosive Components - Per 6120 HD 444.2.2 S2 Fire Hazard Testing Part 2: Test Methods Section 2 - Needle- Flame Test 1992 CENELEC 0 6121 EN 61110 System Omega and Differential Omega Receivers for Ships - Operational and Performance Requirements Methods of 1992 CENELEC 0 Testing and Required Test Results 6122 HD 187 S5 A.C. Metal-Enclosed Switchgear and Control Gear for Rated Voltages Above 1 kV and up to and Including 52 kV 1992 CENELEC 0 6123 HD 358 S3 Gas-Insulated Metal- Enclosed Switchgear for Rated Voltages of 72.5 kV and Above 1992 CENELEC 0 6124 EN 141101 Blank Detail Specification: Lead-Screw Actuated and Rotary Preset Potentiometers 1992 CENELEC 0 6125 HD 555.11 S1 Specifications for Particular Types of Winding Wires Part 11: Bunched Solderable Polyurethane Enamelled Round Copper 1992 CENELEC 0 Wires, Class 130, with Silk Covering 6126 HD 400.3O S1 Hand-Held Motor Operated Tools Part II: Particular Specifications Section O: Routers 1992 CENELEC 0 6127 HD 395.2.19 S1 Medical Electrical Equipment Part 2: Particular Requirements for Safety of Baby Incubators 1992 CENELEC 0 6128 HD 525.1 S1 Shunt Capacitors for a.c. Power Systems Having a Rated Voltage Above 660 V Part 1: General Performance, Testing and 1992 CENELEC 0 Rating Safety Requirements - Guide for Installation and Operation 6129 HD 555.2 S2 Specifications for Particular Types of Winding Wires Part 2: Solderable Polyurethane Enamelled Round Copper Wire, 1992 CENELEC 0 Class 130, with a Bonding Layer 6130 HD 22.2 S2/ A5 AMD 5 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods 1992 CENELEC 0 6131 HD 555.21 S2 Specifications for Particular Types of Winding Wires Part 21: Solderable Polyurethane Enamelled Round Copper Wire 1992 CENELEC 0 Overcoated with Polyamide, Class 155 6132 HD 611.3.1 S1 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 3: Instructions for 1992 CENELEC 0 Calculating Thermal Endurance Characteristics Section One: Calculations Using Mean Values of Normally Distributed Complete Data 6133 EN 60835-3-1 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on 1992 CENELEC 0 Satellite Earth Stations Section 3.1 General 6134 HD 578 S1 Characteristics of Indoor and Outdoor Post Insulators for Systems with Nominal Voltages Greater Than 1000 V 1992 CENELEC 0 6135 EN 168201 Blank Detail Specification: Quartz Crystal Units (Qualification Approval) 1992 CENELEC 0 6136 HD 384.2 S1/ AMD 1 International Electrotechnical Vocabulary (IEV) Chapter 826: Electrical Installations of Buildings 1992 CENELEC 0 A1 6137 EN 60870-5-3 Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 3: General Structure of Application Data 1992 CENELEC 0 6138 HD 555.15 S2 Specifications for Particular Types of Winding Wires Part 15: Polyesterimide Enamelled Round Aluminium Wire, Class 1992 CENELEC 0 180 6139 HD 22.1 S2/ AMD 12 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1992 CENELEC 0 A12 6140 HD 323.2.33 S1 Basic Environmental Testing Procedures Part 2: Tests Guidance on Change of Temperature Tests 1992 CENELEC 0 6141 HD 478.2.6 S1 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Earthquake Vibration 1992 CENELEC 0 and Shock 6142 EN 60107-5 Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions Part 5: Electrical 1992 CENELEC 0 Measurements on Multichannel Sound Television Receivers Using the NICAM Two-Channel Digital Sound-System - Incorporates Amendment A1: 1999 6143 EN 61104 Compact Disc Video System - 12 cm CD-V 1992 CENELEC 0 6144 HD 22.1 S2/ AMD 11 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1992 CENELEC 0 A11 6145 HD 22.2 S2/ A7 AMD 7 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods 1992 CENELEC 0 6146 HD 602 S1 Test on Gases Evolved During Combustion of Materials from Cables Determination of Degree of Acidity (Corrosivity) of 1992 CENELEC 0 Gases by Measuring pH and Conductivity 6147 HD 22.8 S1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 8: Polychloroprene or Equivalent 1992 CENELEC 0 Synthetic Elastomer Sheathed Cables for Use as Decorative Chains (Reprint Incorporating A1) 6148 EN 123100 Sectional Specification: Single and Double Sided Printed Boards with Plain Holes 1992 CENELEC 0 6149 HD 611.1 S1 Guide for the Determination of Thermal Endurance Properties of Electrical Insulating Materials Part 1: General Guidelines 1992 CENELEC 0 for Ageing Procedures and Evaluation of Test Results 6150 HD 323.2.57 S1 Basic Environmental Testing Procedures Part 2: Tests Test Ff: Vibration - Time-History Method 1992 CENELEC 0 6151 EN 125100 Sectional Specification: Magnetic Oxide Cores for Inductor Applications 1991 CENELEC 0 6152 HD 582 S1 Specification for Unused Polybutylenes 1991 CENELEC 0 6153 HD 142 S3 Terms and Definitions for Printed Circuits 1991 CENELEC 0 6154 EN 50069 Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear 1991 CENELEC 0 - Incorporates Amendment A1: 1993; Incorporating Corrigendum August 2007 6155 HD 323.5.2 S1 Environmental Testing Part 5: Guide to Drafting of Test Methods Terms and Definitions 1991 CENELEC 0 6156 HD 323.1 S2 Environmental Testing Part 1: General and Guidance 1991 CENELEC 0 6157 HD 594 S1 Self-Ballasted Lamps for General Lighting Services - Performance Requirements 1991 CENELEC 0 6158 EN 60529 Degrees of Protection Provided by Enclosures (IP Code) - Incorporates Amendments A1: 2000 and A2: 2013 1991 CENELEC 0 6159 EN 114001 Blank Detail Specification: Photomultiplier Tubes 1991 CENELEC 0 6160 HD 559.2 S1 Methods of Test for Electric Strength of Solid Insulating Materials - Part 2: Additional Requirements for Tests Using 1991 CENELEC 0 Direct Voltage 6161 HD 323.2.59 S1 Basic Environmental Testing Procedures Part 2: Tests Test Fe: Vibration - Sine Beat Method 1991 CENELEC 0 6162 HD 21.5 S2/ A4 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 5: Flexible Cables (Cords) 1991 CENELEC 0 6163 HD 583 S1 Medical Electrical Equipment Medical Electron Accelerators Functional Performance Characteristics 1991 CENELEC 0 6164 HD 307.3.5 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specifications for 1991 CENELEC 0 Individual Materials Sheet 5: Unsaturated Polyester Impregnating Resins 6165 HD 537 S1 Test Requirements for the Evaluation of the Emission of Ionized Gases During Short- Circuit Tests of Residual Current 1991 CENELEC 0 Operated Circuit- Breakers with Integrated Overcurrent Protection for Household and Similar Use 6166 HD 400.2E/A1 AMD 1 Hand-Held Motor Operated Tools Part II: Particular Specifications Section E: Circular Saws and Circular Knives 1991 CENELEC 0 6167 HD 483.15 S3 Sound System Equipment Part 15: Preferred Matching Values for the Interconnection of Sound System Components 1991 CENELEC 0 6168 HD 251 S3/ A2 AMD 2 + Annexe Safety of Household and Similar Electrical Appliances: General Requirements 1991 CENELEC 0 + ANNEXE 6169 EN 113000 Generic Specification: Camera Tubes 1991 CENELEC 0 6170 EN 123000 Generic Specification: Printed Boards - Incorporates Amendments A1: 1995 and A2: 1996 1991 CENELEC 0 6171 HD 505.1.3 S2 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application 1991 CENELEC 0 Section Three - Methods for Determining the Density Water Absorption Tests - Shrinkage Test 6172 HD 313.2.9 S3 Base Materials for Printed Circuits Part 2: Specifications Specification No. 9: Epoxide Cellulose Paper Core, Epoxide 1991 CENELEC 0 Glass Cloth Surfaces Copper- Clad Laminated Sheet of Defined Flammability (Vertical Burning Test) 6173 HD 533 S1 Short-Circuit Current Calculation in Three- Phase a.c. Systems 1991 CENELEC 0 6174 HD 236.12.1 S1 Methods of Measurement for Radio Transmitters Part 12: Guideline for Drawing up Descriptive Leaflets for Transmitters 1991 CENELEC 0 and Transposers for Sound and Television Broadcasting Characteristics to be Specified 6175 HD 546.3 S1 Telecontrol Equipment and Systems Part 3: Interfaces (Electrical Characteristics) 1991 CENELEC 0 6176 HD 201/1 S1 Alkaline Secondary Cells and Batteries Sealed Nickel-Cadmium Cylindrical Rechargeable Single Cells for Permanent 1991 CENELEC 0 Charge at Elevated Temperatures 6177 HD 525.2 S1/ AMD 1 Shunt Capacitors for A.C. Power Systems Having a Rated Voltage Above 660V Part 2: Endurance Testing 1991 CENELEC 0 A1 6178 HD 588 S1 High-Voltage Test Techniques Part 1: General Definitions and Test Requirements 1991 CENELEC 0 6179 EN 143001 Blank Detail Specification: Directly Heated Negative Temperature Coefficient Thermistors (Beads in Solid Glass of 1991 CENELEC 0 Vitreous Enamel) 6180 HD 559.1 S1 Methods of Test for Electric Strength of Solid Insulating Materials Part 1: Tests at Power Frequencies 1991 CENELEC 0 6181 HD 551 S1 Shipborne Radar - Operational and Performance Requirements - Methods of Test and Required Test Results 1991 CENELEC 0 6182 EN 111000 Generic Specification: Cathode Ray Tubes 1991 CENELEC 0 6183 EN 114000 Generic Specification: Photomultiplier Tubes 1991 CENELEC 0 6184 EN 125401 Blank Detail Specification: Adjusters Used with Magnetic Oxide (Ferrite) Cores for Use in Inductors and Tuned 1991 CENELEC 0 Transformers 6185 EN 61077 Helical-Scan Video Tape Cassette System Using 12,65 mm (O,5 in) Magnetic Tape on Type VHS Compact VHS Cassette 1991 CENELEC 0 6186 HD 21.1 S2/ A6 AMD 6 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General 1991 CENELEC 0 Requirements 6187 EN 116200 Sectional Specification: Electromechanical All-Or-Nothing Relays (Including Relays for Severe Environmental 1991 CENELEC 0 Conditions) 6188 HD 539 S1 Reactors 1991 CENELEC 0 6189 HD 334 S3 Marking Codes for Resistors and Capacitors 1991 CENELEC 0 6190 HD 327 S2/ A1 AMD 1 Safety Requirements for Electronic Flash Apparatus for Photographic Purposes 1991 CENELEC 0 6191 HD 201 S2 Sealed Nickel-Cadmium Cylindrical Rechargeable Single Cells 1991 CENELEC 0 6192 HD 53.16.1 S1 Rotating Electrical Machines Part 16: Excitation Systems for Synchronous Machines Chapter 1: Definitions 1991 CENELEC 0 6193 EN 112001 Blank Detail Specification: Image Converter and Image Intensifier Tubes 1991 CENELEC 0 6194 EN 60735 Measuring Methods for Video Tape Properties 1991 CENELEC 0 6195 EN 111001 Blank Detail Specification: Cathode Ray Tubes 1991 CENELEC 0 6196 HD 56 S2 Definitions and Nomenclature for Carbon Brushes, Brush-Holders, Commutators and Slip- Rings 1991 CENELEC 0 6197 HD 491.9 S1 Safety in Electroheat Installations Part 9: Particular Requirements for High-Frequency Dielectric Heating Installations 1991 CENELEC 0 6198 HD 323.2.32 S2 Basic Environmental Testing Procedures Part 2: Tests Test ed: Free Fall 1991 CENELEC 0 6199 HD 505.1.2 S2 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application 1991 CENELEC 0 Section Two - Thermal Ageing Methods 6200 HD 540.3 S1 Insulation Co-Ordination Part 3: Phase-to-Phase Insulation Co-Ordination Principles, Rules and Application Guide 1991 CENELEC 0 6201 HD 278 S1/ A6 AMD 6 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters; 1991 CENELEC 0 6202 EN 50080 RF Characteristics of MAC AM-VSB Cable Receivers 1991 CENELEC 0 6203 HD 541 S1 Methods of Test for the Determination of the Ignitability of Solid Electrical Insulating Materials When Exposed to 1991 CENELEC 0 Electrically Heated Wire Sources 6204 HD 543.1 S1 Performance and Testing of Teleprotection Equipment of Power Systems Part 1: Narrow- Band Command Systems 1991 CENELEC 0 6205 HD 355.1 S2 High-Voltage Switches Part 1: High-Voltage Switches for Rated Voltages Above 1kv and Less Than 52 kv 1991 CENELEC 0 6206 HD 245.3 S2 Letter Symbols to Be Used in Electrical Technology Part 3: Logarithmic Quantities and Units 1991 CENELEC 0 6207 HD 400.2E S2 AMD 1 Hand-Held Motor Operated Tools Part II: Particular Specifications Section E: Circular Saws and Circular Knives 1991 CENELEC 0 /A1 6208 EN 111100 Sectional Specification: Display Storage Tubes 1991 CENELEC 0 6209 HD 490.5 S2 Methods of Test for Winding Wires Part 5: Electrical Properties 1991 CENELEC 0 6210 HD 400.2D/A1 AMD 1 Hand-Held Motor Operated Tools Part II: Particular Specifications (Section D) 1991 CENELEC 0 6211 EN 113001 Blank Detail Specification: Camera Tubes 1991 CENELEC 0 6212 HD 584 S1 Method for Measuring the Felting Severity of the Wool Wash Programme of Electric Clothes Washing Machines for 1991 CENELEC 0 Household Use 6213 HD 53.3 S1 Rotating Electrical Machines Part 3: Specific Requirements for Turbine-Type Synchronous Machines 1991 CENELEC 0 6214 EN 125400 Sectional Specification: Adjusters Used with Magnetic Oxide Cores for Use in Inductors and Tuned Transformers 1991 CENELEC 0 6215 EN 50068 Wrought Steel Enclosures for Gas-Filled High- Voltage Switchgear and Controlgear 1991 CENELEC 0 6216 HD 243 S9 Graphical Symbols for Use on Equipment - Index, Survey and Compilation of the Single Sheets 1991 CENELEC 0 6217 HD 483.11 S2 Sound System Equipment Part 11: Application of Connectors for the Interconnection of Sound System Components 1991 CENELEC 0 6218 EN 143004 Blank Detail Specification: Directly Heated Negative Temperature Coefficient Thermistors (Rod Type) 1991 CENELEC 0 6219 HD 558 S1 Economic Optimisation of Power Cable Size 1991 CENELEC 0 6220 EN 111101 Blank Detail Specification: Display Storage Tubes 1991 CENELEC 0 6221 HD 323.3.3 S1 Environmental Testing Part 3: Guidance - Seismic Test Methods for Equipments 1991 CENELEC 0 6222 HD 355.2 S2 High-Voltage Switches Part 2: High-Voltage Switches for Rated Voltages of 52 kV and Above 1991 CENELEC 0 6223 HD 585 S1 Electrolyte for Vented Nickel-Cadmium Cells 1991 CENELEC 0 6224 HD 540.2 S1 Insulation Co-Ordination Part 2: Application Guide 1991 CENELEC 0 6225 HD 400.2C/A1 AMD 1 Hand-Held Motor Operated Tools Part II: Particular Specifications (Section C) 1991 CENELEC 0 6226 HD 369.10 S4 Audiovisual, Video and Television Equipment and Systems Part 10: Audio Cassette Systems 1991 CENELEC 0 6227 EN 125200 Sectional Specification: Magnetic Oxide Cores for Linear Transformers 1991 CENELEC 0 6228 EN 143002 Blank Detail Specification: Directly Heated Negative Temperature Coefficient Thermistors (Beads in Envelopes) 1991 CENELEC 0 6229 EN 117000 Generic Specification: Solid State All-Or-Nothing Relays of Assessed Quality. Generic Data and Methods of Test 1991 CENELEC 0 6230 EN 100014 Basic Specification: CECC Assessed Process Average Process Average Procedure (60% Confidence Limit) 1991 CENELEC 0 6231 HD 581 S1 Application Guide for Calculation of Short- Circuit Currents in Low-Voltage Radial Systems 1991 CENELEC 0 6232 HD 236.12.2 S1 Methods of Measurements for Radio Transmitters Part 12: Guideline for Drawing up Descriptive Leaflets for Transmitters 1991 CENELEC 0 and Transposers for Sound and Television Broadcasting Specification Sheets 6233 HD 536 S1 Test Requirements for the Evaluation of the Emission of Ionized Gases During Short- Circuit Tests of Residual Current 1991 CENELEC 0 Operated Circuit- Breakers for Household and Similar Use 6234 HD 505.1.1 S3 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application 1991 CENELEC 0 Section One - Measurement of Thickness and Overall Dimensions - Tests for Determining the Mechanical Properties 6235 EN 143003 Blank Detail Specification: Directly Heated Negative Temperature Coefficient Thermistors (Disk Type) 1991 CENELEC 0 6236 HD 546.2.1 S1 Telecontrol Equipment and Systems Part 2: Operating Conditions Section One - Environmental Conditions and Power 1991 CENELEC 0 Supplies 6237 HD 53.15 S1 Rotating Electrical Machines Part 15: Impulse Voltage Withstand Levels of Rotating A.C. Machines with Form-Wound 1991 CENELEC 0 Stator Coils 6238 HD 109.2 S1 Miniature Fuses Part 2: Cartridge Fuse-Links 1990 CENELEC 0 6239 HD 428/A1 AMD 1 Three-Phase Oil-Immersed Public Distribution Transformers, 50 Hz, from 50 to 2500 kVA, with Highest Voltage 1990 CENELEC 0 for Equipment Not Exceeding 24 kV 6240 HD 313.2.3 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No.3: Epoxide Cellulose Paper Copper-Clad 1990 CENELEC 0 Laminated Sheet of Defined Flammability (Vertical Burning Test) 6241 HD 491.3 S1 Safety in Electroheat Installations Part 3: Particular Requirements for Induction and Conduction Heating and Induction 1990 CENELEC 0 Melting Installations 6242 HD 568 S1 Methods of Test for the Determination of the Insulation Resistance of Solid Insulating Materials 1990 CENELEC 0 6243 HD 46.3.1 S1 Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section One - Basic Dimensions 1990 CENELEC 0 6244 HD 505.4.1 S2 Common Test Methods- Insulating/Sheathing Materials Electric Cables Part 4: Methods Polyethylene/ Polypropylene 1990 CENELEC 0 Compounds Sec 1-Resistance Environmental Stress- Cracking/Wrapping Test After Thermal Ageing in Air-Measurement of Melt Flow Index-Carbon Black 6245 HD 555.23 S1 Specifications for Particular Types of Winding Wires Part 23: Solderable Polyester (Imide) Enamelled Round Copper 1990 CENELEC 0 Winding Wire, Class 180 6246 HD 571 S1 General Principles for the Creation of Graphical Symbols for Use on Equipment 1990 CENELEC 0 6247 HD 555.13 S1 Specifications for Particular Types of Winding Wires Part 13: Polyester (imide) Overcoated with Polyamide-Imide, 1990 CENELEC 0 Enamelled Round Copper Winding Wire, Class 200 6248 EN 60465 Specification for Unused Insulating Mineral Oils For Cables with Oil Ducts 1990 CENELEC 0 6249 HD 555.15 S1 Specifications for Particular Types of Winding Wires Part 15: Polyesterimide Enamelled Round Aluminium Winding Wire, 1990 CENELEC 0 class 180 6250 HD 1003 Heating in Contact with the Front of the Domestic Cooking Appliances Burning Gas 1990 CENELEC 0 6251 EN 60335-2-33 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Coffee Mills and Coffee 1990 CENELEC 0 Grinders 6252 HD 490.3 S2 Methods of Test for Winding Wires Part 3: Mechanical Properties 1990 CENELEC 0 6253 HD 555.27 S1 Specification for Particular Types of Winding Wires Part 27: Paper Covered Rectangular Copper Winding Wire 1990 CENELEC 0 6254 HD 287 S1/ A1 AMD 1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Commercial Electric 1990 CENELEC 0 Multi-Purpose Cooking Pans 6255 HD 478.2.7 S1 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature - Fauna and Flora 1990 CENELEC 0 6256 HD 523.3.403 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 1990 CENELEC 0 TO 405 S1 403 to 405: Glass Textile Sleeving with Acrylic Based Coating 6257 HD 523.3.121 Specification for Flexible Insulating Sleeving Part 3: Specification Requirement for Individual Types of Sleeving Sheets 1990 CENELEC 0 .122 S1 121 and 122: Extruded Silicone Sleevings 6258 HD 280.3 S1 Safety Requirements for Electric Fans and Regulators Part 3: Jet Fans 1990 CENELEC 0 6259 EN 50075 Flat Non-Wirable Two-Pole Plugs, 2,5 A 250 V, with Cord, for the Connection of Class II-Equipment for Household and 1990 CENELEC 0 Similar Purposes 6260 HD 313.2.14 S1 Base Materials for Printed Circuits Part 2: Specifications Specification No 14: Phenolic Cellulose Paper Copper-Clad 1990 CENELEC 0 Laminated Sheet of Defined Flammability (Vertical Turning Test) Economic Quality 6261 HD 564 S1 Nominal Dimensions of Cylindrical Machined Graphite Electrodes with Threaded Sockets and Nipples for Use in Electric 1990 CENELEC 0 Arc Furnaces 6262 HD 21.1 S2/ A5 AMD 5 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General 1990 CENELEC 0 Requirements 6263 HD 280.2 S1 Safety Requirements for Electric Fans and Regulators Part 2: Fans and Regulators for Use in Ships 1990 CENELEC 0 6264 HD 483.12 S1 Sound System Equipment Part 12: Application of Connectors for Broadcast and Similar Use 1990 CENELEC 0 6265 HD 492.1 S2/ AMD 1 High-Voltage Fuses Part 1: Current Limiting Fuses 1990 CENELEC 0 A1 6266 HD 505.1.1 S2 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application 1990 CENELEC 0 Section One - Measurement of Thickness and Overall Dimensions - Tests for Determining the Mechanical Properties 6267 HD 483.3 S1 Sound System Equipment Part 3: Amplifiers 1990 CENELEC 0 6268 HD 573 Type C Helical Video Tape Recorders 1990 CENELEC 0 6269 HD 313.2.2 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No.2: Phenolic Cellulose Paper Copper-Clad 1990 CENELEC 0 Laminated Sheet, Economic Quality 6270 HD 313.2.12 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No. 12: Thin Epoxide Woven Glass Fabric Copper- 1990 CENELEC 0 Clad Laminated Sheet of Defined Flammability, for Use in the Fabrication of Multilayer Printed Boards 6271 HD 219 S3 Law Pressure Sodium Vapour Lamps 1990 CENELEC 0 6272 HD 109.1 S1 Miniature Fuses Part 1: Definitions for Miniature Fuses and General Requirements for Miniature Fuse-Links 1990 CENELEC 0 6273 HD 555.2 S1 Specifications for Particular Types of Winding Wires Part 2: Solderable Polyurethane Enamelled Round Copper Winding 1990 CENELEC 0 Wire, Class 130, with a Bonding Layer 6274 HD 547 S1 Conductive Clothing for Live Working at a Nominal Voltage up to 800 KV a.c. 1990 CENELEC 0 6275 HD 580 S1 Synthetic Testing of High-Voltage Alternating Current Circuit-Breakers 1990 CENELEC 0 6276 HD 313.2.10 S3 Base Materials for Printed Circuits Part 2: Specifications Specification No. 10: Epoxide Non-Woven/Woven Glass 1990 CENELEC 0 Reinforced Copper- Clad Laminated Sheet of Defined Flammability (Vertical Burning Test) 6277 HD 21.7 S1 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750V Part 7: Single Core Non-Sheathed 1990 CENELEC 0 Cables for Internal Wiring for a Conductor Temperature of 90 Degrees Celsius 6278 HD 21.8 S1 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Single Core Non-Sheathed Cable for 1990 CENELEC 0 Decorative Chains 6279 HD 313.2.1 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No 1 : Phenolic Cellulose Paper Copper-Clad 1990 CENELEC 0 Laminated Sheet High Electrical Quality 6280 HD 313.2.4 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No.4: Epoxide Woven Glass Fabric Copper-Clad 1990 CENELEC 0 Laminated Sheet, General Purpose Grade 6281 HD 555.8 S1 Specifications for Particular Types of Winding Wires Part 8: Polyesterimide Enamelled Round Copper Winding Wire, 1990 CENELEC 0 Class 180 6282 HD 555.1 S1 Specifications for Particular Types of Winding Wires Part 1: Polyvinyl Acetal Enamelled Round Copper Winding Wire, 1990 CENELEC 0 Class 105 6283 HD 313.2.9 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No.9: Epoxide Cellulose Paper Core, Epoxide Glass 1990 CENELEC 0 Cloth Surfaces Copper- Clad Laminated Sheet of Defined Flammability (Vertical Burning Test) 6284 HD 274 S2 Safety of Household and Similar Electrical Appliances Requirements for the Connection of Washing Machines, 1990 CENELEC 0 Dishwashers and Tumble Dryers to the Water Supply Mains 6285 HD 483.5 S1 Sound System Equipment Part 5: Loudspeakers 1990 CENELEC 0 6286 HD 138 S2 Sealing Test for Professional Waveguide Tubing and Assemblies 1990 CENELEC 0 6287 HD 313.2.11 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No. 11: Thin Epoxide Woven Glass Fabric Copper- 1990 CENELEC 0 Clad Laminated Sheet, General Purpose Grade, for Use in the Fabrication of Multilayer Printed Boards 6288 HD 542 S1 Insulating Poles (Insulating Sticks) and Universal Tool Attachments (Fittings) for Live Working 1990 CENELEC 0 6289 HD 483.15 S2 Sound System Equipment Part 15: Preferred Matching Values for the Interconnection of Sound System Components 1990 CENELEC 0 6290 HD 555.22 S1 Specifications for Particular Types of Winding Wires Part 22: Polyester (Imide) Enamelled Round Copper Winding Wire 1990 CENELEC 0 Overcoated with Polyamide, Class 180 6291 HD 555.25 S1 Specifications for Particular Types of Winding Wires Part 25: Polyester (Imide) Overcoated with Polyamide- Imide 1990 CENELEC 0 Enamelled Round Aluminium Winding Wire, Class 200 6292 EN 60182-2 Basic Dimensions of Winding Wires Part 2: Maximum Overall Diameters of Enamelled Round Winding Wires 1990 CENELEC 0 6293 HD 323.2.56 S1 Basic Environmental Testing Procedures Part 2: Tests Test Cb; Damp Heat, Steady State, Primarily for Equipment 1990 CENELEC 0 6294 HD 21.1 S2 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements 1990 CENELEC 0 6295 HD 284 S1/ A1 AMD 1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Commercial Electric 1990 CENELEC 0 Ranges, Ovens and Hob Elements 6296 HD 467.2.3 S1 Methods of Measurement for Radio Equipment Used in Satellite Earth Stations Part 2: Measurements for Sub- Systems 1990 CENELEC 0 Section Three - Low-Noise Amplifier 6297 HD 576 S1 Parallel Sub-System Bus of the IEC 821 VME Bus 1990 CENELEC 0 6298 HD 278 S1/ A3 AMD 3 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heater; 1990 CENELEC 0 6299 HD 555.18 S1 Specifications for Particular Types of Winding Wires Part 18: Polyvinyl Acetal Enamelled Rectangular Copper Winding 1990 CENELEC 0 Wire, Class 120 6300 HD 423.2.3 AMD 1 Test Code for the Determination by Airborne Acoustical Noise Emitted by Household and Similar Electrical 1990 CENELEC 0 S1/A1 Appliances Part 2: Particular Requirements for Dishwashers 6301 HD 21.5 S2 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 v Part 5: Flexible Cables (Cords) 1990 CENELEC 0 6302 HD 483.11 S1 Sound System Equipment Part 11: Application of Connectors for the Interconnection of Sound System Components 1990 CENELEC 0 6303 HD 560.1 S1 Methods of Measurement on Radio Receivers for Various Classes of Emission Part 1: General Considerations and Methods 1990 CENELEC 0 of Measurement, Including Audio- Frequency Measurements 6304 HD 555.20 S1 Specifications for Particular Types of Winding Wires Part 20: Solderable Polyurethene Enamelled Round Copper Winding 1990 CENELEC 0 Wire, Class 155 6305 HD 499 S1 Integrating-Averaging Sound Level Meters 1990 CENELEC 0 6306 HD 523.3.100 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 1990 CENELEC 0 TO 105 S1 100 to 105: Extruded PVC Sleeving 6307 HD 555.14 S1 Specifications for Particular Types of Winding Wires Part 14: Polyvinyl Acetal Enamelled Round Aluminium Winding 1990 CENELEC 0 Wire, Class 105 6308 HD 408 S2 Alternating Current Disconnectors and Earthing Switches 1990 CENELEC 0 6309 HD 236.11 S1 Methods of Measurement for Radio Transmitters Part 11: Transposers for FM Sound Broadcasting 1990 CENELEC 0 6310 HD 567.6 S1 Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions Part 6: Measurement Under 1990 CENELEC 0 Conditions Different from Broadcast Signal Standards 6311 HD 555.12 S1 Specifications for Particular Types of Winding Wires Part 12: Polyvinyl Acetal Enamelled Round Copper Winding Wire, 1990 CENELEC 0 Class 120 6312 HD 555.16 S1 Specifications for Particular Types of Winding Wires Part 16: Polyester Enamelled Rectangular Copper Winding Wire, 1990 CENELEC 0 Class 155 6313 HD 555.19 S1 Specifications for Particular Types of Winding Wires Part 19: Solderable Polyurethane Enamelled Round Copper Winding 1990 CENELEC 0 Wire Overcoated with Polyamide, Class 130 6314 HD 555.21 S1 Specifications for Particular Types of Winding Wires Part 21: Solderable Polyurethane Enamelled Round Copper Winding 1990 CENELEC 0 Wire Overcoated with Polyamide, Class 155 6315 HD 446.2 S2 Thermocouples Part 2: Tolerances 1990 CENELEC 0 6316 HD 46.4.1 S1 Packaging of Winding Wires Part 4: Methods of Test Section One - Delivery Spools Made from Thermoplastic Material 1990 CENELEC 0 6317 HD 523.3.406 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 1990 CENELEC 0 TO 408 S1 406 to 408: Glass Textile Sleeving with PVC Based Coating 6318 HD 460.3.1 S1 Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section One-Basic Dimensions 1990 CENELEC 0 6319 HD 278 S1/ A5 AMD 5 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters; 1990 CENELEC 0 6320 HD 313.2.7 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No.7 : Phenolic Cellulose Paper Copper-Clad 1990 CENELEC 0 Laminated Sheet of Defined Flammability (Vertical Burning Test) 6321 HD 555.4 S1 Specifications for Particular Types of Winding Wires Part 4: Solderable Polyurethane Enamelled Round Copper Winding 1990 CENELEC 0 Wire, Class 130 6322 HD 577 Standardization of Interconnections Between Broadcasting Transmitters or Transmitter Systems and Supervisory 1990 CENELEC 0 Equipment Part 1: Interface Standards for Systems Using Dedicated Interconnections 6323 HD 262.4 S1 Particular Specification for Portable Immersion Heaters 1990 CENELEC 0 6324 HD 566 S1 Thermal Evaluation and Classification of Electrical Insulation 1990 CENELEC 0 6325 HD 555.26 S1 Specifications for Particular Types of Winding Wires Part 26: Polyamide-Imide Enamelled Round Copper Winding Wire, 1990 CENELEC 0 Class 200 6326 HD 278 S1/ A4 AMD 4 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters; 1990 CENELEC 0 6327 HD 555.7 S1 Specifications for Particular Types of Winding Wires Part 7: Polyimide Enamelled Round Copper Winding Wire, Class 1990 CENELEC 0 220 6328 HD 307.3.11 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specification for 1990 CENELEC 0 Individual Materials Sheet 11: Epoxy Resin- Based Coating Powders 6329 HD 313.2.5 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No.5: Epoxide Woven Glass Fabric Copper-Clad 1990 CENELEC 0 Laminated Sheet of Defined Flammability (Vertical Burning Test) 6330 HD 555.24 S1 Specifications for Particular Types of Winding Wires Part 24: Polyester (Imide) Enamelled Round Aluminium Winding 1990 CENELEC 0 Wire Overcoated with Polyamide, Class 180 6331 HD 555.17 S1 Specifications for Particular Types of Winding Wires Part 17: Polyvinyl Acetal Enamelled Rectangular Copper Winding 1990 CENELEC 0 Wire, Class 105 6332 HD 313.2.10 S2 Base Materials for Printed Circuits Part 2: Specifications Specification No. 10: Epoxide Non-Woven Glass Reinforced 1990 CENELEC 0 Copper-Clad Laminated Sheet of Defined Flammability (Vertical Burning Test) 6333 HD 460.2.1 S1 Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery Spools Section One - Basic Dimensions 1990 CENELEC 0 6334 HD 282 S1 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Instantaneous Water Heaters 1990 CENELEC 0 6335 HD 574 S1 Type B Helical Video Recorders 1990 CENELEC 0 6336 HD 494 S2 Lamps for Road Vehicles Dimensional, Electrical and Luminous Requirements 1990 CENELEC 0 6337 HD 557 S1 Binary Direct Voltage Signals for Process Measurement and Control Systems 1990 CENELEC 0 6338 HD 323.2.17 S4 Basic Environmental Testing Procedures Part 2: Tests Test Q: Sealing 1990 CENELEC 0 6339 HD 46.2.1 S1 Packaging of Winding Wires Part 2: Cylindrical Barrelled Delivery Spools. Section One - Basic Dimensions 1990 CENELEC 0 6340 HD 369.14 S2 Audiovisual, Video and Television Equipment on Systems Part 14: Audio Striped Card System 1989 CENELEC 0 6341 HD 109.3 S1 Miniature Fuses Part 3: Sub-Miniature Fuse-Links 1989 CENELEC 0 6342 HD 395.2.15 S1 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Capacitor Discharge X- Ray Generators 1989 CENELEC 0 6343 HD 313.2.3 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No 3: Epoxide Cellulose Paper Copper-Clad 1989 CENELEC 0 Laminated Sheet of Defined Flammability (Vertical Burning Test) 6344 HD 313.2.7 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No.7: Phenolic Cellulose Paper Copper-Clad 1989 CENELEC 0 Laminated Sheet of Defined Flammability (Vertical Burning Test) 6345 HD 523.3.209 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving 1989 CENELEC 0 S1 6346 HD 529 S1 Compact Disc Digital Audio System 1989 CENELEC 0 6347 HD 262.3 S1 Particular Specification for Portable Immersion Heaters 1989 CENELEC 0 6348 HD 523.2 S1 Specification for Flexible Insulating Sleeving-Part 2: Methods of Tests 1989 CENELEC 0 6349 HD 313.2.13 S1 Base Materials for Printer Circuits-Part 2: Specifications Specification No. 13: Flexible Copper-Clad Polyimide Film, 1989 CENELEC 0 General Purpose Grade 6350 HD 550 S1 Mechanical Structures for Electronic Equipment - Terminology 1989 CENELEC 0 6351 HD 552 S1 Marine Navigational Equipment - General Requirements - Methods of Testing and Required Test Results 1989 CENELEC 0 6352 HD 186 S2 Marking by Inscription for the Identification of Cores of Electric Cables Having More Than 5 Cores 1989 CENELEC 0 6353 HD 369.18 S1 Audiovisual, Video and Television Equipment and Systems Part 18: Connectors for Automatic Slide Projectors with Built- 1989 CENELEC 0 in Triacs for Audiovisual Application 6354 HD 423.2.3 S1 Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances 1989 CENELEC 0 Part 2: Particular Requirements for Dishwashers 6355 HD 53.1 S2/ A2 AMD 2 Rotating Electrical Machines - Part 1: Rating and Performance 1989 CENELEC 0 6356 HD 348 S3 High Voltage Alternating- Current Circuit-Breakers 1989 CENELEC 0 6357 HD 527 S1 Measuring Method for Chrominance Signal-to- Random Noise Ratio for Video Tape Recorders 1989 CENELEC 0 6358 EN 60051-3 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 3: Special Requirements 1989 CENELEC 0 for Wattmeters and Varmeters - Incorporates Amendment A1: 1995 6359 HD 512 S1 Measurement of the Conversion Factor of Electro-Optical X-Ray Intensifiers 1989 CENELEC 0 6360 HD 483.15 S1 Sound System Equipment- Part 15: Preferred Matching Valves for the Interconnection of Sound System Components 1989 CENELEC 0 6361 HD 352.3.1 S2 Specification for Insulating Materials Based on Mica-Part 3: Specifications for Individual Materials. Sheet One: 1989 CENELEC 0 Commutator Separators and Materials 6362 HD 395.2.16 S1 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Heamodialysis Equipment 1989 CENELEC 0 6363 HD 416.2 S1 Specification for Vulcanized Flore for Electrical Purposes- Part 2: Methods of Test 1989 CENELEC 0 6364 HD 243 S8 Graphical Symbols for Use on Equipment. Index, Survey and Compilation of the Single Sheets 1989 CENELEC 0 6365 HD 525.2 S1 Shunt Capacitors for a.c. Power Systems Having a Rated Voltage Above 660v Part 2: Endurance Testing 1989 CENELEC 0 6366 EN 60598-2-7 Luminaires Part 2: Particular Requirements Section Seven - Portable Luminaires for Garden Use - Incorporates 1989 CENELEC 0 Amendments A11: 1994, A12: 1995, A2: 1996 and A13: 1997; Incorporating Corrigendum January 1999; Remains Current 6367 HD 523.3.320 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving 1989 CENELEC 0 S1 6368 HD 400.3 S2 Hand Held Motor Operated Tools Part II: Particular Specifications Section L: Chain Saws 1989 CENELEC 0 6369 EN 60215 Safety Requirements for Radio Transmitting Equipment - Incorporates Amendments A1: 1992 and A2: 1994 1989 CENELEC 0 6370 EN 60051-9 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 9: Recommended Test 1989 CENELEC 0 Methods 6371 HD 515 S1 Determination of the Image Distortion of Electro-Optical X-Ray Image Intensifiers 1989 CENELEC 0 6372 HD 506 S1 Bushings for Liquid Transformers Above 1kv up to 33kv 1989 CENELEC 0 6373 HD 278 S1/ A2 AMD 2 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters; 1989 CENELEC 0 6374 HD 549 S1 Conference Systems - Electrical and Audio Requirements 1989 CENELEC 0 6375 HD 477.3.3 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems Part 3: Simulated Systems Section Three 1989 CENELEC 0 - Measurements for Monochrome and Colour Television Transmission 6376 HD 468 S1 Ionizing Radiation Measurement Systems with Analogue or Digital Signal Processing for Thickness Measurements 1989 CENELEC 0 6377 HD 95.3 S1 Aerials for the Reception of Sound and Television Broadcasting in the Frequency Range 30 MHz to 1 GHz-Part 3: Methods 1989 CENELEC 0 of Measurement of Mechanical Properties, Vibration and Environmental Tests 6378 HD 53.8 S3/ A1 AMD 8 Rotating Electrical Machines - Part 8: Terminal Markings and Direction of Rotation of Rotating Machines 1989 CENELEC 0 6379 HD 307.3.4 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specifications for 1989 CENELEC 0 Individual Materials Sheet 4: Filled Polyurethane Compounds 6380 HD 313.2.5 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No.5: Epoxide Woven Glass Fabric Copper-Clad, 1989 CENELEC 0 Laminated Sheet of Defined Flammability (Vertical Burning Test) 6381 HD 438 S1 Method of Test for Electrical Resistance and Resistivity of Insulating Materials at Elevated Temperatures 1989 CENELEC 0 6382 HD 369.10 S3 Audiovisual, Video and Television Equipment and Systems Part 10: Audio Cassette Systems 1989 CENELEC 0 6383 HD 423.2.1 AMD 1 Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical 1989 CENELEC 0 S1/A1 Appliances Part 2: Particular Requirements for Vacuum Cleaners 6384 HD 184 S4 A.C. Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1kv and up to and Including 72.5kV 1989 CENELEC 0 6385 HD 337 S3 Analogue Audio Disk Records and Reproducing Equipment 1989 CENELEC 0 6386 HD 526 S1 Marine Automatic Radar Plotting Aids (ARPA). Operational Requirements-Methods of Testing and Test Results 1989 CENELEC 0 6387 HD 395.2.13 S1 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Anaesthetic Machines 1989 CENELEC 0 6388 HD 311.2 S2 Magnetic Tape Sound Recording and Reproducing Systems Part 2: Calibration Tapes 1989 CENELEC 0 6389 HD 211.2 S8 Primary Batteries - Part 2: Specification Sheets 1989 CENELEC 0 6390 HD 352.1 S2 Specification for Insulating Materials Based on Mica-Part 1: Definitions and General Requirements 1989 CENELEC 0 6391 HD 395.2.11 S1 Medical Electrical Equipment-Part 2: Particular Requirements for the Safety of Gamma Beam Therapy Equipment 1989 CENELEC 0 6392 HD 313.2.10 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No 10: Epoxide Non-Woven/Woven Glass 1989 CENELEC 0 Reinforced Copper- Clad Laminated Sheet of Defined Flammability (Vertical Burning Test) 6393 HD 313.2.4 S1 Base Materials for Printed Circuits-Part 2: Specifications. Specification No.4: Epoxide Woven Glass Fabric Copper-Clad 1989 CENELEC 0 Laminated Sheet, General Purpose Grade 6394 HD 530.2 S1 Controllers with Analogue Signals for Use in Industrial - Process Control Systems Part 2: Guidance for Inspection and 1989 CENELEC 0 Routine Testing 6395 HD 307.3.3 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 3: Specifications for 1989 CENELEC 0 Individual Materials. Sheet Three: Unfilled Polyurethane Compounds 6396 HD 513 S1 Determination of the Maximum Symmetrical Radiation Field from a Rotating Anode X-Ray Tube for Medical Diagnosis 1989 CENELEC 0 6397 HD 400.2 S2 Hand-Held Motor Operated Tools - Part II: Particular Specifications Section E: Circular Saws and Circular Knives 1989 CENELEC 0 6398 HD 195 S6 Safety Requirements for Mains Operated Electronic and Related Apparatus for Household and Similar General Use 1989 CENELEC 0 6399 HD 530.1 S1 Controllers with Analogue Signals for Use in Industrial - Process Control Systems Part 1: Methods of Evaluating the 1989 CENELEC 0 Performance 6400 HD 459 S2 Industrial Platinum Resistance Thermometer Sensors 1989 CENELEC 0 6401 EN 60598-2-1 Luminaires Part 2: Particular requirements Section one - Fixed general purpose luminaires 1989 CENELEC 0 6402 EN 60051-2 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 2: Special Requirements 1989 CENELEC 0 for Ammeters and Voltmeters 6403 HD 423.2.1 S1 Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances 1989 CENELEC 0 Part 2: Particular Requirements for Vacuum Cleaners 6404 HD 523.3.300 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving 1989 CENELEC 0 S1 6405 HD 311.3 S2 Magnetic Tape Sound Recording and Reproducing Systems Part 3: Methods of Measuring the Characteristics of Recording 1989 CENELEC 0 and Reproducing Equipment for Sound on Magnetic Tape 6406 EN 60598-2-9 Luminaires Part 2: Particular requirements Section 9: Photo and film luminaires (non-professional) - Incorporates 1989 CENELEC 0 Amendment A1: 1994 6407 HD 313.2.11 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No 11: Thin Epoxide Woven Glass Fabric Copper- 1989 CENELEC 0 Clad Laminated Sheet, General Purpose Grade for Use in the Fabrication of Multilayer Printed Boards 6408 EN 50064 Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear - Incorporating 1989 CENELEC 0 corrigendum August 2007; Incorporates Amendment A1: 1993 6409 HD 478.2.4 S1 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Solar Radiation and 1989 CENELEC 0 Temperature 6410 HD 483.1 S2 Sound System Equipment - Part 1: General 1989 CENELEC 0 6411 HD 307.2 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 2: Methods of Test 1989 CENELEC 0 6412 HD 531 S1 Helical-Scan Video Tape Cassette System Using 8mm Magnetic Tape - Video 8 1989 CENELEC 0 6413 HD 323.2.27 S2 Basic Environmental Testing Procedures Part 2: Tests 1989 CENELEC 0 6414 HD 40 001 Information Systems Interconnection; Combinations of Reference Documents for the Elaboration of Functional Standards 1989 CENELEC 0 6415 HD 395.2.12 S1 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Lung Ventilators for Medical Use 1989 CENELEC 0 6416 HD 273 S2/ A1 AMD 1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Sewing Machines 1989 CENELEC 0 6417 HD 187 S4 A.C Metal-Enclosed Switchgear and Controlgear for Rated Voltages above 1KV and up to and Including 72.5 KV 1989 CENELEC 0 6418 HD 466.6 S1 Methods of Measurement for Radio Equipment Used in the Mobile Services Part 6: Selective - Calling and Data Equipment 1989 CENELEC 0 6419 HD 528 S1 A Method of Temperature - Rise Assessment by Extrapolation for Partially Type-Tested Assemblies (PTTA) of Low 1989 CENELEC 0 Voltage Switchgear and Controlgear 6420 HD 311.10 S1 Magnetic Tape Sound Recording and Reproducing Systems Part 10: Time and Address Codes 1989 CENELEC 0 6421 HD 416.3.1 S1 Specification for Vulcanized Fibre for Electrical Purposes- Part 3: Specifications for Individual Materials. Sheet One: Flat 1989 CENELEC 0 Sheets 6422 HD 313.2.12 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No 12: Thin Epoxide Woven Glass Fabric Copper- 1989 CENELEC 0 Clad Laminated Sheet of Defined Flammability for Use in the Fabrication of Multilayer Printed Boards 6423 EN 60598-2-19 Luminaires Part 2: Particular requirements Section 19 Air-handling luminaires (safety requirements) - Incorporates 1989 CENELEC 0 Amendment A2: 1998; Incorporating Corrigendum December 2005 6424 HD 544 S1 Audio Recording - PCM Encoder/Decoder System 1989 CENELEC 0 6425 HD 109.5 S1 Miniature Fuses Part 5: Guidelines for Quality Assessment of Miniature Fuse-Links 1989 CENELEC 0 6426 EN 60051-4 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 4: Special Requirements 1989 CENELEC 0 for Frequency Meters 6427 HD 395.2.7 S1 Medical Electrical Equipment-Part 2: Particular Requirements for the Safety of High- Voltage Generators of Diagnostic X- 1989 CENELEC 0 Ray Generators 6428 HD 448 S2 Common Clauses for High- Voltage Switchgear and Controlgear Standards 1989 CENELEC 0 6429 HD 477.3.4 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems Part 3: Simulated Systems Section Four 1989 CENELEC 0 - Measurement for F.D.M. Transmission 6430 HD 423.2.4 S1 Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances- 1989 CENELEC 0 Part 2: Particular Requirements for Washing Machines and Spin Extractors 6431 HD 483.2 S1 Sound System Equipment- Part 2: Explanation of General Terms and Calculation Methods 1989 CENELEC 0 6432 HD 313.2.9 S1 Base Materials for Printed Circuits-Part 2: Specifications Specification No 9: Expoxide Cellulose Paper Core, Epoxide 1989 CENELEC 0 Glass Cloth Surfaces Copper- Clad Laminated Sheet of Defined Flammability (Vehicle Burning Test) 6433 HD 466.5 S1 Methods of Measurement for Radio Equipment Used in the Mobile Services Part 5: Receivers Employing Single- Sideband 1989 CENELEC 0 Techniques (R3E, H3E or J3E) 6434 HD 334 S2 Marking Codes for Resistors and Capacitors 1989 CENELEC 0 6435 HD 307.2.2 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 2: Methods of Test. 1989 CENELEC 0 Test Methods for Coating Powders for Electrical Purposes 6436 HD 523.3.320 Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheet 1989 CENELEC 0 320: Polyethylene Terephthalate Textile, Lightly Impregnated 6437 HD 275 S1/ A1 AMD 1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Cooking Ranges, 1989 CENELEC 0 Cooking Tables, Ovens and Similar Appliances for Household Use 6438 HD 352.3.3 S1 Specification for Insulating Materials Based on Mica-Part 3: Specifications for Individual Materials. Sheet Three: 1989 CENELEC 0 Specifications for Rigid Mica Materials for Heating Equipment 6439 HD 395.2.14 S1 Medical Electrical Equipment part 2: Particular Requirements for the Safety of Electro Convulsive Therapy Equipment 1989 CENELEC 0 6440 HD 307.3.1 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 3: Specifications for 1989 CENELEC 0 Individual Materials. Sheet one: Unfilled Epoxy Resinous Compounds 6441 HD 492.1 S2 High-Voltage Fuses; Part 1: Current Limiting Fuses 1989 CENELEC 0 6442 HD 395.2.9 S1 Medical Electrical Equipment-Part 2: Particular Requirements for the Safety of Dosimeters Used in Radiotherapy with 1989 CENELEC 0 Electrically-Connected Radiation Detectors 6443 EN 60335-2-46 Safety of household and similar electrical appliances Part 2: Particular requirements for commercial electric steam cookers 1989 CENELEC 0 - Incorporates Amendment A1: 1992 6444 HD 323.2.29 S2 Basic Environmental Testing Procedures-Part 2: Tests. Test Eb and Guidance: Bump 1989 CENELEC 0 6445 HD 323.2.41 S1 Basic Environmental Testing Procedures-Part 2: Tests. Test Z/BM: Combined Dry Heat/Low Air Pressure Tests 1988 CENELEC 0 6446 HD 505.1.1 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application 1988 CENELEC 0 Section One - Measurement of Thickness and Overall Dimension Tests for Determining the Mechanical Properties 6447 HD 323.2.32 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test Ed: Free Fall 1988 CENELEC 0 6448 HD 372 S1 Safety of Electrically Energized Office Machines 1988 CENELEC 0 6449 HD 494 S1 Lamps for Road Vehicles. Dimensional, Electrical and Luminous Requirements 1988 CENELEC 0 6450 HD 505.4.1 S1 Test Methods - Insulating/Sheathing Materials of Electric Cables Part 4: Polyethylene/Polypropylene Compounds Section 1988 CENELEC 0 One - Resistance - Environmental Stress Cracking - Wrapping Test Thermal Ageing in Air - Measurement of Melt Flow Index - Carbon Black 6451 HD 500 S1 Methods to be Used for Measuring Energy Consumption of Thermal Storage Water Heaters and for the Purpose of 1988 CENELEC 0 Informing Consumers of it 6452 HD 278 S1/ A1 AMD 1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters; 1988 CENELEC 0 6453 HD 323.2.45 S1 Basic Environmental Testing Procedures-Part 2: Tests. Test XA and Guidance: Immersion in Cleaning Solvents 1988 CENELEC 0 6454 HD 53.4 S2 Rotating Electrical Machines-Part 4: Methods for Determining Synchronous Machine Quantities from Tests 1988 CENELEC 0 6455 HD 505.1.2 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application 1988 CENELEC 0 Section Two - Thermal Ageing Methods 6456 HD 323.2.11 Basic Environmental Testing Procedures Part 2: Tests Test Ka: Salt Mist 1988 CENELEC 0 6457 HD 211.1 S6 Primary Batteries - Part 1: General 1988 CENELEC 0 6458 HD 243 S7 Graphical Symbols for Use on Equipment. Index, Survey and Compilation of the Single Sheets 1988 CENELEC 0 6459 HD 504 S1 Methods of Evaluating the Performance of Electrical and Pneumatic Analogue Chart Recorders for Use in Industrial- 1988 CENELEC 0 Process Control Systems 6460 HD 420 S2 Control Switches (Low Voltage Switching - Devices for Control and Auxiliary Circuit, Including Contactor Relays) 1988 CENELEC 0 6461 HD 507 S1 Time and Control Code for Video Tape Recorders 1988 CENELEC 0 6462 HD 426.3 S1 Specification for Ceramic and Glass Insulating Materials- Part 3: Individual Materials 1988 CENELEC 0 6463 HD 510 S1 Entrance Field Sizes of Electro-Optical X-Ray Image Intensifiers 1988 CENELEC 0 6464 HD 369.10 S2 Audiovisual, Video and Television Equipment and Systems - Part 10: Audio Cassette Systems 1988 CENELEC 0 6465 HD 477.2.5 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems-Part 2: Measurements for Sub- Systems 1988 CENELEC 0 Section Five- Frequency Demodulators 6466 HD 503 S1 Lamps for Road Vehicles Performance Requirements 1988 CENELEC 0 6467 HD 505.2.1 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 2: Methods Specific to Elastomeric 1988 CENELEC 0 Compounds Section One - Ozone Resistance Test - Hot Set Test - Mineral Oil Immersion Test 6468 HD 323.2.29 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test Eb: Bump 1988 CENELEC 0 6469 HD 311.6 S1 Magnetic Tape Sound Recording and Reproducing Systems- Part 6: Reel-to-Reel Systems 1988 CENELEC 0 6470 HD 490.5 S1 Methods of Test for Winding Wires Part 5: Electrical Properties 1988 CENELEC 0 6471 HD 261.4 S1 Particular Specification for Kitchen Machines 1988 CENELEC 0 6472 HD 323.2.35 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test Fda: Random Vibration Wide Band - Reproducibility High 1988 CENELEC 0 6473 HD 493.3 S1 Dimensions of Mechanical Structures of the 482.6 mm (19 in) Series - Part 3: Subracks and Associated Plug-in Units 1988 CENELEC 0 6474 HD 195 S5 Safety Requirements for Mains Operated Electronic and Related Apparatus for Household and Similar General Use 1988 CENELEC 0 6475 HD 480 S1 Test Method for Evaluating Thermal Endurance of Flexible Sheet Materials Using the Wrapped Tube Method 1988 CENELEC 0 6476 HD 505.3.2 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 3: Methods Specific to PVC 1988 CENELEC 0 Compounds Section Two - Loss of Mass Test - Thermal Stability Test 6477 HD 491.1 S1 Safety in Electroheat Installations - Part 1: General Requirements 1988 CENELEC 0 6478 HD 236.10 S1 Methods of Measurement for Radio Transmitters - Part 10: Methods of Measurement for Television Transmitters and 1988 CENELEC 0 Transposers Employing Insertion Test Signals 6479 HD 505.3.1 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 2: Methods Specific to PVC 1988 CENELEC 0 Compounds Section one - Pressure Test at High Temperature - Tests for Resistance to Cracking 6480 HD 323.2.44 S1 Basic Environmental Testing Procedures - Part 2: Tests. Guidance on Test T: Soldering 1988 CENELEC 0 6481 HD 323.2.37 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test Fdc: Random Vibration Wide Band - Reproducibility Low 1988 CENELEC 0 6482 HD 477.3.6 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems-Part 3: Simulated Systems- Section Six- 1988 CENELEC 0 Measurements for Sound- Programme Transmission 6483 HD 98 S1 Test Enclosures of Non-Injection Type Constant Relative Humidity 1988 CENELEC 0 6484 HD 501 S1 Medical Radiology - Terminology 1988 CENELEC 0 6485 HD 323.2.48 S1 Basic Environmental Testing Procedures - Part 2: Tests. Guidance on the Application of the Tests of IEC Publication 68 to 1988 CENELEC 0 Simulate the Effects of Storage 6486 HD 323.2.46 S1 Basic Environmental Testing Procedures - Part 2: Tests. Guidance to Test Kd: Hydrogen Sulphide Test for Contacts and 1988 CENELEC 0 Connections 6487 HD 467.1.2 S1 Methods of Measurement for Radio Equipment Used in Satellite Earth Stations - Part 1: Measurements Common to Sub- 1988 CENELEC 0 Systems and Combinations of Sub- Systems. Section Two: Measurements in the r.f. Range 6488 HD 496 S1 Insulating Foam-Filled Tubes and Solid Rods for Live Working 1988 CENELEC 0 6489 HD 477.1 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems-Part 1: Measurements Common to Sub- 1988 CENELEC 0 Systems and Simulated Radio-Relay Systems 6490 HD 46.3 S1 Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools for Winding Wires 1988 CENELEC 0 6491 HD 323.2.40 S1 Basic Environmental Testing Procedures - Part 2: Tests Test Z/AM: Combined Cold/Low Air Pressure Tests 1988 CENELEC 0 6492 HD 53.7 S1 Rotating Electrical Machines Part 7: Symbols for Types of Construction and Mounting Arrangements of Rotating Electrical 1988 CENELEC 0 Machinery 6493 HD 419.3 S1 Low-Voltage Controlgear Part 3: Additional Requirements for Contactors Subject to Certification 1988 CENELEC 0 6494 HD 486 S1 Test Method for Evaluating the Oxidation Stability of Hydrocarbon Insulating Liquids 1988 CENELEC 0 6495 HD 398.5/A1 AMD 1 Power Transformers Part 5: Ability to Withstand Short-Circuit 1988 CENELEC 0 6496 HD 323.2.6 S2 Basic Environmental Testing Procedures - Part 2: Tests. Test Fc and Guidance: Vibration (Sinusoidal) 1988 CENELEC 0 6497 HD 265 S2/ A1 AMD 1 Safety of Household and Similar Electrical Appliances - Particular Requirements for Appliances for Toasters, 1988 CENELEC 0 Grills, Roasters and Similar Appliances 6498 HD 426.2 S1 Specification for Ceramic and Glass Insulating Materials - Part 2: Methods of Test 1988 CENELEC 0 6499 HD 146 S4 Dimensions of Electronic Tubes and Valves 1988 CENELEC 0 6500 HD 53.6 S1 Rotating Electrical Machines Part 6: Methods of Cooling Rotating Machinery 1988 CENELEC 0 6501 HD 511 S1 Determination of the Luminance Distribution of Electro- Optical X- Ray Image Intensifiers 1988 CENELEC 0 6502 HD 488 S1 Gassing of Insulating Liquids Under Electrical Stress and Ionization 1988 CENELEC 0 6503 HD 391 S3 Dimensions for the Mounting of Single-Hole, Bush-Mounted, Spindle- Operated Electronic Components 1988 CENELEC 0 6504 HD 347 S1 Mechanical Vibration of Certain Rotating Electrical Machinery with Shaft Heights Between 80 and 400 mm Measurement 1988 CENELEC 0 and Evaluation of the Vibration Severity 6505 HD 505.1.3 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application 1988 CENELEC 0 Section Three - Methods for Determining the Density - Water Absorption Tests - Shrinkage Test 6506 HD 323.2.21 S3 Basic Environmental Testing Procedures-Part 2: Tests. Test V: Robustness of Terminations and Integral Mounting Devices 1988 CENELEC 0 6507 HD 323.2.30 S3 Basic Environmental Testing Procedures - Part 2: Tests. Test Db and Guidance: Damp Heat, Cyclic (12 + 12-Hour Cycle) 1988 CENELEC 0 6508 HD 365 S3 Classification of Degrees of Protection Provided by Enclosures 1988 CENELEC 0 6509 HD 497 S1 Specifications for Unused Insulating Liquids Based on Synthetic Aromatic Hydrocarbons 1988 CENELEC 0 6510 HD 423.2.2 S1 Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances- 1988 CENELEC 0 Part 2: Particular Requirements for Forced Draught Convection Heaters 6511 HD 395.1 S2 Medical Electrical Equipment Part 1: General Requirements 1988 CENELEC 0 6512 HD 323.2.17 S3 Basic Environmental Testing Procedures-Part 2: Tests. Test Q: Sealing 1988 CENELEC 0 6513 HD 509 S1 Characteristics of Focal Spots in Diagnostic X- Ray Tube Assemblies for Medical Use 1988 CENELEC 0 6514 HD 323.2.31 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test Ec: Drop and Topple, Primarily for Equipment- Type 1988 CENELEC 0 Specimens 6515 HD 42.4 S1 Basic Dimensions of Winding Wires Part 4: Diameters of Conductors for Round Resistance Wires 1988 CENELEC 0 6516 HD 48 S1 Impulse Tests on Cables and Their Accessories 1988 CENELEC 0 6517 HD 477.2.4 S1 Methods of Measurement of Equipment Used in Terrestrial Radio-Relay Systems - Part 2: Measurements for Sub- Systems 1988 CENELEC 0 Section Four - Frequency Modulators 6518 HD 323.2.34 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test Fd: Random Vibration Wide Band - General Requirements 1988 CENELEC 0 6519 HD 495 S1 Spring-Operated Impact- Test Apparatus and its Calibration 1988 CENELEC 0 6520 HD 323.2.47 S1 Basic Environmental Testing Procedures - Part 2: Tests. Mounting of Components. Equipment and Other Articles for 1988 CENELEC 0 Dynamic Tests Including Shock (Es). Bump (Eb). Vibration (Fc and Fd) and Steady-State Acceleration (Ga) and Guidance 6521 HD 143.3 S1 Packaging of Components for Automatic Handling Part 3: Packaging of Leadless Components on Continuous Tapes 1988 CENELEC 0 6522 HD 307.3.2 S1 Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 3: Specifications for 1988 CENELEC 0 Individual Materials. Sheet Two: Quartz Filled Epoxy Resinous Compounds 6523 HD 498 S1 Flickermeter Functional and Design Specifications 1988 CENELEC 0 6524 HD 323.2.28 S1 Basic Environmental Testing Procedures - Part 2: Tests. Guidance for Damp Heat Tests 1988 CENELEC 0 6525 HD 409 S1 Guide to the Testing of Circuit-Breakers with Respect to out-of-Phase Switching 1988 CENELEC 0 6526 HD 487 S1 Determination of Water in Insulating Liquids by Automatic Coulometric Karl Fischer Titration 1988 CENELEC 0 6527 HD 482 S1 Radiation Safety of Laser Products, Equipment, Classification, Requirements, and Users Guide 1988 CENELEC 0 6528 HD 369.8 S1 Audiovisual, Video and Television Equipment and Systems- Part 8: Symbols and Identification 1988 CENELEC 0 6529 HD 246.6 S2 Diagrams, Charts, Tables Part 6: Preparation of Unit Wiring Diagrams and Tables 1988 CENELEC 0 6530 HD 477.3.2 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems-Part 3: Simulated Systems- Section 1988 CENELEC 0 Two- Measurements in the Baseband 6531 HD 505.1.4 S1 Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1 Methods for General Application 1988 CENELEC 0 Section Four - Tests at Low Temperature 6532 HD 288 S1 Safety of Household and Similar Electric Appliances - Part 2: Particular Requirements for Commercial Electric Forced 1987 CENELEC 0 Convection Ovens 6533 HD 490.3 Methods of Test for Winding Wires Part 3: Mechanical Properties 1987 CENELEC 0 6534 HD 370 S2 Modular Plug-in Unit and Standard 19-Inch Rack Amounting Unit Based on NIM Standard (for Electronic Nuclear 1987 CENELEC 0 Instruments) 6535 HD 461 Process Stream Radiation Monitoring Equipment in Light Water Nuclear Reactors for Normal Operating and Incident 1987 CENELEC 0 Conditions 6536 HD 23 Electrical Installations for Caravans with Supply Voltages up to 250 V 1987 CENELEC 0 6537 HD 490.2 Methods of Test for Winding Wires Part 2: Determination of Dimensions 1987 CENELEC 0 6538 HD 380 S2 Test Methods for Evaluating Resistance to Tracking and Erosion of Electrical Insulating Materials Used Under Severe 1987 CENELEC 0 Ambient Conditions 6539 HD 490.4 Methods of Test for Winding Wires Part 4:Chemical Properties 1987 CENELEC 0 6540 HD 477.2.1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems Part 2: Measurements for Sub- Systems 1987 CENELEC 0 Section One - General 6541 HD 278 S1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters 1987 CENELEC 0 6542 HD 260 S3 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Coffee Mills and Coffee 1987 CENELEC 0 Grinders 6543 HD 323.2.13 Basic Environmental Testing Procedures Part 2: Tests Test M: Low air Pressure 1987 CENELEC 0 6544 HD 481.1 Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 1: General Introduction 1987 CENELEC 0 6545 HD 450.7 Hearing Aids Part 7: Measurement of Performance Characteristics of Hearing Aids for Quality Inspection for Delivery 1987 CENELEC 0 Purposes 6546 HD 323.2.52 Basic Environmental Testing Procedures Part 2: Tests Test kb: Salt Mist, Cylic (Sodium Chloride Solution) 1987 CENELEC 0 6547 HD 77 Lighting Fittings for Incandescent Lamps for Domestic and Similar Purposes 1987 CENELEC 0 6548 HD 413.3 Operating Conditions for Industrial-Process Measurement and Control Equipment Part 3: Mechanical Influences 1987 CENELEC 0 6549 HD 143.2 Packaging of Components for Automatic Handling Part 2: Tape Packaging of Components with Unidirectional Leads on 1987 CENELEC 0 Continuous Tapes 6550 HD 253 S3/ A1 AMD 1 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Electric Irons 1987 CENELEC 0 6551 HD 313.2.1 Base Materials for Printed Circuits Part 2: Specifications Specification No 1: Phenolic Cellulose Paper Copper - Clad 1987 CENELEC 0 Laminated Sheet, High Electrical Quality 6552 HD 323.2.10 S2 Basic Environmental Testing Procedures - Part 2: Tests. Test J: Mould Growth 1987 CENELEC 0 6553 HD 357 S2 A Modular Instrumentation System for Data Handling; CAMAC System 1987 CENELEC 0 6554 HD 481.2 Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 2: Electrostatic Discharge 1987 CENELEC 0 Requirements 6555 HD 462 Process Stream Radiation Monitoring Equipment in Light Water Nuclear Reactors for Normal Operating and Incident 1987 CENELEC 0 Conditions 6556 HD 463 Helican - Scan Video Tape Cassette Systems Using 12.65mm (0.5 in) Magnetic Tape on Type VHS 1987 CENELEC 0 6557 HD 477.2.2 Methods of Measurement for Equipment Used in Terrestrial Radio - Relay Systems Part 2: Measurements for Sub- Systems 1987 CENELEC 0 Section Two - Stand-by Channel Switching Equipment 6558 HD 349 Preferred Diameters of Wire Terminations of Capacitors and Resistors 1987 CENELEC 0 6559 HD 369.5 Audio-Visual, Video and Television Equipment and Systems Part 5: Control, Synchronization and Address Codes Chapter 1987 CENELEC 0 1: Synchronized Tape/Visual Operating Practice 6560 HD 358 S2 Gas-Insulated Metal- Enclosed Switchgear for Rated Voltages of 72.5 kV and Above 1987 CENELEC 0 6561 HD 313.1.S4 Base Materials for Printed Circuits - Part 1: Test Methods 1987 CENELEC 0 6562 HD 323.2.54 Basic Environmental Testing Procedures Part 2: Tests Test TA: Soldering, Solderability Testing by the Wetting Balance 1987 CENELEC 0 Method 6563 HD 313.2.6 Base Materials for Printed Circuits Part 2: Specifications Specification No 6: Phenolic Cellulose Paper Copper- Clad 1987 CENELEC 0 Laminated Sheet of Defined Flammability (Horizontal Burning Test) 6564 HD 323.2.51 S1 Basic Environmental Testing Procedures Part 2: Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for Both 1987 CENELEC 0 Heat-Dissipating and Non Heat-Dissipating Specimens 6565 HD 490.6 Methods of Test for Winding Wires Part 6: Thermal Properties 1987 CENELEC 0 6566 HD 245.4 Letter Symbols to Be Used in Electrical Technology Part 4: Symbols of Quantities to Be Used for Rotating Electrical 1987 CENELEC 0 Machines 6567 HD 354 S2 Colours of Indicator Lights and Push-Buttons 1987 CENELEC 0 6568 HD 444.2.3 Fire Hazard Testing Part 2: Test Methods Bad- Connection Test with Heaters 1987 CENELEC 0 6569 HD 53.9 Rotating Electrical Machines Part 9: Noise Limits 1987 CENELEC 0 6570 HD 474 S1 Dimensions of Ball and Socket Couplings of String Insulator Units 1987 CENELEC 0 6571 HD 395.2.6 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Microwave Therapy Equipment 1987 CENELEC 0 6572 HD 251 S3/ A3 AMD 3 Safety of Household and Similar Electrical Appliances: General Requirements 1987 CENELEC 0 6573 HD 323.2.17 S2 Basic Environmental Testing Procedures - Part 2: Tests. Test Q: Sealing 1987 CENELEC 0 6574 HD 323.2.9 S2 Basic Environmental Testing Procedures - Part 2: Tests. Guidance for Solar Radiation Testing 1987 CENELEC 0 6575 HD 323.2.50 S1 Basic Environmental Testing Procedures Part 2: Tests Tests Z/AFc: Combined Cold/Vibration (Sinusoidal) Tests for Both 1987 CENELEC 0 Heat-Dissipating and Non-Heat-Dissipating Specimens 6576 HD 251 S3 Safety of Household and Similar Electrical Appliances: General Requirements 1987 CENELEC 0 6577 HD 469 Expression of the Properties of Logic Analysers 1987 CENELEC 0 6578 HD 65.3 Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 3: Gauges 1987 CENELEC 0 6579 HD 323.2.3 S2 Basic Environmental Testing Procedures - Part 2: Tests. Test Ca: Damp Heat, Steady State 1987 CENELEC 0 6580 HD 468 Ionizing Radiation Measurement Systems with Analogue or Digital Signal Processing for Thickness Measurements 1987 CENELEC 0 6581 HD 285 S1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Commercial Electric Deep Fat 1987 CENELEC 0 Fryers 6582 HD 272 S3 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Ultra-Violet and Infra- Red 1987 CENELEC 0 Radiation Skin Treatment Appliances for Household Use 6583 HD 477.2.6 S1 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems Part 2: Measurements for Sub- Systems 1987 CENELEC 0 Section Six - Diversity, Twin-Path and Hot Stand-by Equipment 6584 HD 273 S2 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Sewing Machines 1987 CENELEC 0 6585 HD 42.1 S3 Basic Dimensions of Winding Wires - Part 1: Diameters of Conductors for Round Winding Wires 1987 CENELEC 0 6586 HD 489 S1 Recommended Dimensions for Hexagonal and Square Crimping-Die Cavities, Indentors, Gauges, Outer Conductor Crimp 1987 CENELEC 0 Sleeves and Centre Contact Crimp Barrels for R.F. Cables and Connectors 6587 HD 450.11 Hearing Aids Part 11: Symbols and Other Markings on Hearing Aids and Related Equipment 1987 CENELEC 0 6588 HD 450.9 Hearing Aids Part 9: Methods of Measurement of Characteristics of Hearing Aids with Bone Vibrator Output 1987 CENELEC 0 6589 HD 323.2.1 S2 Basic Environmental Testing Procedures Part 2: Tests Test A: Cold 1987 CENELEC 0 6590 HD 251 S3/ A2 AMD 2 Safety of Household and Similar Electrical Appliances: General Requirements 1987 CENELEC 0 6591 HD 284 S1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Commercial Electric Ranges, 1987 CENELEC 0 Ovens and Hob Elements 6592 HD 477.2.6 Methods of Measurement for Equipment Used in Terrestrial Radio-Relay Systems Section Six - Diversity, Twin-Path and 1987 CENELEC 0 Hot Stand-by Equipment 6593 HD 203 Grid System for Printed Circuits 1987 CENELEC 0 6594 HD 286 S1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Commercial Electric Griddles 1987 CENELEC 0 and Griddle Grills 6595 HD 417 S2 Camac-Serial Highway Interface System 1987 CENELEC 0 6596 HD 323.2.7 S2 Basic Environmental Testing Procedures - Part 2: Tests. Test Ga and Guidance: Acceleration, Steady State 1987 CENELEC 0 6597 HD 323.2.20 S2 Basic Environmental Testing Procedures - Part 2: Tests. Test T: Soldering 1987 CENELEC 0 6598 HD 65.2 Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 2: Lampholders 1987 CENELEC 0 6599 HD 465.1 Lead - Acid Traction Batteries Part 1: General Requirements and Methods of Test 1987 CENELEC 0 6600 HD 236.8 S2 Methods of Measurement for Radio Transmitters - Part 8: Vestigial- Sideband Demodulators for use in Conjunction with 1987 CENELEC 0 Transmitters or Transposers for Monochrome or Colour Television 6601 HD 398.3 Power Transformers Insulation Levels and Dielectric Tests 1986 CENELEC 0 6602 HD 450.6 S1 Hearing Aids Part 6: Characteristics of Electrical Input Circuits for Hearing Aids 1986 CENELEC 0 6603 HD 275 S1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Cooking Ranges, Cooking 1986 CENELEC 0 Tables, Ovens and Similar Appliances for Household Use 6604 HD 466.8 Methods of Measurement for Radio Equipment Used in the Mobile Services Part 8: Methods of Measurement for Antennas 1986 CENELEC 0 6605 HD 385 S2 Test Methods for Insulations and Sheaths of Electric Cables and Cords (Elastomeric and Thermoplastic Compounds) 1986 CENELEC 0 6606 HD 53.12 Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors for 1986 CENELEC 0 Voltages up to and Including 660 V, 50 Hz 6607 HD 476.1 Solderless Connections Part 1: Solderless Wrapped Connections - General Requirements, Test Methods and Practical 1986 CENELEC 0 Guidance 6608 HD 53.1 S2/ A1 AMD 1 Rotating Electrical Machines - Part 1: Rating and Performance 1986 CENELEC 0 6609 HD 369.5.2 Audio-Visual, Video and Television Equipment and Systems Part 5: Control Synchronization and Address Codes Chapter 1986 CENELEC 0 II: Control Systems for Two Still Projectors Operating Practice 6610 HD 395.2.5 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Ultrasonic Therapy Equipment 1986 CENELEC 0 6611 HD 253 S3 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Electric Irons 1986 CENELEC 0 6612 HD 351.5 Rigid Precision Coaxial Lines and Their Associated Precision Connectors Part 5: 50 Ohms 3.5mm Rigid Precision Coaxial 1986 CENELEC 0 Line with Provision for Mounting Connectors 6613 HD 274 S1 Requirements for the Connection of Washing Machines and Dishwashers to the Water Supply Mains 1986 CENELEC 0 6614 HD 279 S1 Safety of Household and Similar Electrical Appliances- Part 2: Particular Requirements for Frying Pans, Deep Fat Fryers 1986 CENELEC 0 and Similar Appliances 6615 HD 95.4 Aerials for the Reception of Sound and Television Broadcasting in the Frequency Range 30MHz to 1GHz Part 4: Guide for 1986 CENELEC 0 the Preparation of Aerial Performance Specifications - Detailed Specification Sheet Format 6616 HD 374 S2 CAMac - Organization of Multi-Crate Systems. Specification of the Branch-Highway and CAMAC Crate Controller Type 1986 CENELEC 0 A1 6617 HD 269 S2 Safety of Household and Similar Electrical Appliances- Part: Particular Requirements for Refrigerators and Food Freezers 1986 CENELEC 0 6618 HD 276 S1/ A1 AMD 1 Safety of Household and Similar Electrical Appliances Particular Requirements for Range Hoods 1986 CENELEC 0 6619 HD 369.3 Audio-Visual, Video and Television Equipment and Systems Part 3: Connectors for the Interconnection of Equipment in 1986 CENELEC 0 Audio- Visual Systems 6620 HD 280 S1 Safety of Household and Similar Electrical Appliances: Particular Requirements for Electric Fans and Regulators 1986 CENELEC 0 6621 HD 384.2 International Electrotechnical Vocabulary Chapter 826: Electrical Installations of Buildings 1986 CENELEC 0 6622 HD 479 Oscilloscopes and Peak Voltmeters for Impulse Tests 1986 CENELEC 0 6623 HD 281 S1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Floor Treatment Machines and 1986 CENELEC 0 Wet Scrubbing Machines 6624 HD 475 S1 Dimensions of Planchets Used in Nuclear Electronic Instruments 1986 CENELEC 0 6625 HD 252 S3 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Vacuum Cleaners and Water 1986 CENELEC 0 Suction Cleaning Appliances 6626 HD 481.3 S1 Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment - Part 3: Radiated 1986 CENELEC 0 Electromagnetic Field Requirements 6627 HD 195 S4 Safety Requirements for Mains Operated Electronic and Related Apparatus for Household and Similar General Use 1985 CENELEC 0 6628 HD 277 S1 Safety of Household and Similar Electrical Appliances - Particular Requirements for Motor- Compressors 1985 CENELEC 0 6629 HD 395.2.3 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Short- Wave Therapy Equipment 1985 CENELEC 0 6630 HD 53.1 S2 Rotating Electrical Machines - Part 1: Rating and Performance 1985 CENELEC 0 6631 HD 405.1 Test on Electric Cables Under Fire Conditions Part 1: Test on a Single Vertical Insulated Wire or Cable 1985 CENELEC 0 6632 HD 323.2.11 S1 Basic Environmental Testing Procedures Part 2: Tests Test Ka: Salt Mist 1985 CENELEC 0 6633 HD 53.8 S3 Rotating Electrical Machines - Part 8: Terminal Markings and Direction of Rotation of Rotating Machines 1985 CENELEC 0 6634 HD 457 Code for Designation of Colours 1985 CENELEC 0 6635 HD 392 S2 Heat Test Source (H.T.S.) Lamps for Carrying Out Heating Tests on Luminaires 1985 CENELEC 0 6636 HD 455 Sound Transmission Using Infra-Red Radiation 1985 CENELEC 0 6637 HD 256 S2 Safety of Household and Similar Electrical Appliances. Particular Requirements for Washing Machines 1985 CENELEC 0 6638 HD 251 S3/ A1 AMD 1 Safety of Household and Similar Electrical Appliances: General Requirements 1985 CENELEC 0 6639 HD 402 S2 Standard Colours for Thermoplastic Materials Used for the Insulation for Low-Frequency Cables and Wires 1985 CENELEC 0 6640 HD 276 S1 Safety of Household and Similar Electrical Appliances Particular Requirements for Range Hoods 1985 CENELEC 0 6641 HD 450.5 Hearing Aids Part 5: Nipples for Insert Earphones 1985 CENELEC 0 6642 HD 211.1 S5 Primary Batteries - Part 1: General 1985 CENELEC 0 6643 HD 458 Time Base of Non- Broadcast Video Recorders 1985 CENELEC 0 6644 HD 395.2.2 Medical Electrical Equipment Part 2: Particular Requirements for the Safety of High Frequency Surgical Equipment 1985 CENELEC 0 6645 HD 460 Audio - Frequency Calibration Tape for Transverse Track Recorders 1985 CENELEC 0 6646 HD 245.2 Letter Symbols to be Used in Electrical Technology Part 2: Telecommunications and Electronics 1985 CENELEC 0 6647 HD 452.1 Analogue Signals for Process Control Systems Part 1: Direct Current Signals 1984 CENELEC 0 6648 HD 439 Measuring Methods for Television Tape Machines 1984 CENELEC 0 6649 HD 453 Multiple Controllers in a Camac Crate 1984 CENELEC 0 6650 HD 1/160 General Introductory Document on European (or CEN) Methods of Test for Wood Preservatives 1984 CENELEC 0 6651 HD 446.2 Thermocouples Part 2: Tolerances 1984 CENELEC 0 6652 HD 129.6 Flanges for Waveguides Part 6: Relevant Specifications for Flanges for Medium Flat Rectangular Waveguides 1984 CENELEC 0 6653 HD 134.2 S2 Radio-Frequency Connectors - Part 2: Coaxial Unmatched Connector 1984 CENELEC 0 6654 HD 450.1 Hearing Aids Part 1: Hearing Aids with Induction Pick-up Coil Input 1984 CENELEC 0 6655 HD 451 Transverse Track Video Recorders 1984 CENELEC 0 6656 HD 450.2 Hearing Aids Part 2: Hearing Aids with Automatic Gain Control- Circuits 1984 CENELEC 0 6657 HD 129.2 S2 Flanges for Waveguides - Part 2: Revelant Specifications for Flanges for Ordinary Rectangular Waveguides 1984 CENELEC 0 6658 HD 369.13 Audio-Visual Video and Television Equipment and Systems Part 13: Digital Counter for Audio Cassette Systems 1984 CENELEC 0 6659 HD 187 S3 A.C. Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1kV and up to and Including 72.5kV 1984 CENELEC 0 6660 HD 450.3 Hearing Aids Part 3: Hearing Aids Equipment Not Entirely Worn on the Listener 1984 CENELEC 0 6661 HD 265 S2 Safety of Household and Similar Electrical Appliances - Particular Requirements for Appliances for Toasters, Grills, 1984 CENELEC 0 Roasters and Similar Appliances 6662 HD 416.1 Specification for Vulcanized Fibre for Electrical Purposes Part 1: Definitions and General Requirements 1984 CENELEC 0 6663 HD 389.2 Safety Rules Concerning the Electronic Equipment of Machines for Resistance Welding and Allied Processes 1984 CENELEC 0 6664 HD 454 Measuring Methods for Video Tape Properties 1984 CENELEC 0 6665 HD 254 S2 Safety of Household and Similar Electric Appliances Particular Requirements for Electric Shavers, Hair Clippers and 1984 CENELEC 0 Similar Appliances 6666 HD 264 S2 Safety of Household and Similar Electrical Appliances - Particular Requirements for Appliances for Heating Liquids 1984 CENELEC 0 (CENELEC EN 60335-2-15: 1990) 6667 HD 376 S2 Methods to be Used for Measuring Energy Consumption of Electric Ovens for Household Use and for the Purpose of 1984 CENELEC 0 Informing Consumers of It 6668 HD 447 Helicon-Scan Video-Tape Cassette System Using 19mm (3/4in) Magnetic Tape, as U-Format 1984 CENELEC 0 6669 HD 129.1 S2 Flanges for Waveguides - Part 1: General Requirements 1984 CENELEC 0 6670 HD 263 S1 Particular Specification for Clothes Dryers and Towel Dryers 1984 CENELEC 0 6671 HD 236.9 Methods of Measurement for Radio-Transmitters Part 9: Transposers for Monochrome and Colour Television 1984 CENELEC 0 6672 HD 450.0 Hearing Aids Part 0: Measurement of Electroacoustical Characteristics 1984 CENELEC 0 6673 HD 268 S2 Safety of Household and Similar Electrical Appliances- Particular Requirements for Tumble Dryers 1984 CENELEC 0 6674 HD 257 S2 Safety of Household and Similar Electrical Appliances Particular Requirements for Dishwashers 1984 CENELEC 0 6675 HD 351.4 S2 Rigid Precision Coaxial Lines and Their Associated Precision Connectors - Part 4: 21 mm Rigid Precision Coaxial Line 1984 CENELEC 0 and Associated Hermaphroditic Precision Coaxial Connector Characteristic Impedance 50 OHMs (Type 9/21) Characteristic Impedance 6676 HD 450.4 Hearing Aids Part 4: Magnetic Field Strength in Audio- Frequency Induction Loops for Hearing Aid Purposes 1984 CENELEC 0 6677 HD 369.4 Audio-Visual, Video and Television Equipment and Systems Part 4: Preferred Matching Valves for the Interconnection of 1984 CENELEC 0 Equipment in a System 6678 HD 95.3 Aerials for the Reception of Sound and Television Broadcasting in the Frequency Range 30 MHz to 1GHz Part 3: Methods 1984 CENELEC 0 of Measurements of Mechanical Properties, Vibration and Environmental Tests 6679 HD 444.2.1 Fire Hazard Testing Part 2: Test Methods Glow- Wire Test and Guidance 1983 CENELEC 0 6680 HD 435 Density Meters Utilizing Ionizing Radiation Definitions and Test Methods 1983 CENELEC 0 6681 HD 442 Radiation Protection Equipment for the Measuring and Monitoring of Airborne Tritium 1983 CENELEC 0 6682 HD 364 S2 High Voltage Cable Plug and Socket Connections for Medical X-Ray Equipment 1983 CENELEC 0 6683 HD 425 Sound Level Meters 1983 CENELEC 0 6684 HD 431 Block Transfer in Camac Systems 1983 CENELEC 0 6685 HD 109 S3 Cartridge Fuse-Links for Miniature Fuses - First Supplement: Colour Coding 1983 CENELEC 0 6686 HD 255 S2 Safety of Household and Similar Electric Appliances Particular Requirements for Clocks 1983 CENELEC 0 6687 HD 432 Definitions of Camac Terms Used in IEC Publications 1983 CENELEC 0 6688 HD 441 Methods of Test for the Determination of the Flammability of Solid Electrical Insulating Materials When Exposed to an 1983 CENELEC 0 Igniting Source 6689 HD 445 Subroutines for Camac 1983 CENELEC 0 6690 HD 430 Topflash/Flipflash Photographic Flash Lamp Array 1983 CENELEC 0 6691 HD 436 Dimensions of Optical Fibres 1983 CENELEC 0 6692 HD 428 Three-Phase Oil-Immersed Public Distribution Transformers, 50 Hz, from 50 to 2500 kVA, with Highest Voltage for 1983 CENELEC 0 Equipment Not Exceeding 24 kV 6693 HD 266.4 Particular Specification for Appliances for Skin or Hair Treatment 1983 CENELEC 0 6694 HD 266.3 Particular Specification for Appliances for Skin or Hair Treatment 1983 CENELEC 0 6695 HD 424 Specification for High- Voltage Fuse-Links for Motor Circuit Applications 1983 CENELEC 0 6696 HD 143.1 Packaging of Components for Automatic Handling Part 1: Tape Packaging of Components with Axial Leads on Continuous 1983 CENELEC 0 Tapes 6697 HD 444.2.2 Fire Hazard Testing Part 2: Test Methods Meedle- Flame Test 1983 CENELEC 0 6698 HD 429 S1 Methods of Test for Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials 1983 CENELEC 0 6699 HD 423.100 Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances 1983 CENELEC 0 Part 1: General Requirements 6700 HD 258 S2 Safety of Household and Similar Electrical Appliances - Particular Requirements for Massage Appliances 1983 CENELEC 0 6701 HD 311.1 Magnetic Tape Sound Recording and Reproducing Systems Part 1: General Conditions and Requirements 1983 CENELEC 0 6702 HD 433 Safety Requirements for Arc Welding Equipment Coupling Devices for Welding Cables 1983 CENELEC 0 6703 HD 129.3 S2 Flanges for Waveguides- Part 3: Relevant Specifications for Flanges for Flat Rectangular Waveguides 1983 CENELEC 0 6704 HD 41 S2 Test Procedure for the Determination of the Temperature Index of Enamelled Winding Wires 1983 CENELEC 0 6705 HD 414.2 An Interface System for Programmable Measuring Instruments (Byte Serial, Bit Parallel) Part 2: Code and Format 1983 CENELEC 0 Conventions 6706 HD 398.5 Power Transformers Part 5: Ability to Withstand Short-Circuit 1983 CENELEC 0 6707 HD 420 Control Switches (Low Voltage-Devices for Control and Auxiliary Circuits, Including Contactor Relays) 1982 CENELEC 0 6708 HD 142 S2 Terms and Definitions for Printed Circuits 1982 CENELEC 0 6709 HD 193 S2 Voltage Bands for Electrical Installations of Buildings 1982 CENELEC 0 6710 HD 46.2 S2 Packaging of Winding Wires - Part 2: Delivery Spools for Winding Wires 1982 CENELEC 0 6711 HD 422 Low-Voltage Air-Break Switches, Air-Break Disconnectors, Air-Break Switch-Disconnectors and Fuse-Combination Units 1982 CENELEC 0 6712 HD 134.4 S2 Radio-Frequency Connectors - Part 4: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 16 mm (0.63 in) 1982 CENELEC 0 with Screw Lock. Characteristic Impedance 50 Ohms (Type 7-16) 6713 HD 421 Low-Voltage Motor Starters 1982 CENELEC 0 6714 HD 419 Low-Voltage Switchgear and Controlgear Contactors 1982 CENELEC 0 6715 HD 426.1 S1 Specification for Ceramic and Glass Insulating Materials - Part 1: Definitions and Classification 1982 CENELEC 0 6716 HD 323.1 S1 Basic Environment Testing Procedures Part 1: General and Guidance 1982 CENELEC 0 6717 HD 434 Ripple Control Receivers 1982 CENELEC 0 6718 HD 267 S1 Safety of Household and Similar Electrical Appliances - Particular Requirements for Spin Extractors 1982 CENELEC 0 6719 HD 418 Low-Voltage Switchgear and Controlgear Circuit- Breakers 1982 CENELEC 0 6720 HD 65 Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety 1982 CENELEC 0 6721 HD 249.2 Laboratory Resistors Part 2: Laboratory A.C. Resistors 1981 CENELEC 0 Dimensions and 1981 CENELEC 0 55 _أ EN 50047 Low voltage switchgear and controlgear for industrial use Control switches Position switches 30 6722 characteristics 6723 HD 219 S2 Low Pressure Sodium Vapour Lamps 1981 CENELEC 0 6724 HD 351.3 S2 Rigid Precision Coaxial Lines and Their Associated Precision Connectors - Part 3: 14 mm Rigid Precision Coaxial Line 1981 CENELEC 0 and Associated Hermaphroditic Precision Coaxial Connector - Characteristic Impedances 50 Ohms and 75 Ohms 6725 HD 241 S2 Identification of Apparatus Terminals and General Rules for a Uniform System of Terminal Marking, Using an Alpha- 1981 CENELEC 0 Numeric Notation 6726 HD 307.1 S2 Specification for Solventless Polymerizable Resinous Compounds Used for Electrical Insulation - Part 1: Definitions and 1981 CENELEC 0 General Requirements. Basis for Classification of Polymerisable Resinous Compounds Dimensions and 1981 CENELEC 0 80 _أ EN 50041 Low voltage switchgear and controlgear for industrial use Control switches Position switches 42,5 6727 characteristics 6728 HD 400.3 Hand-Held Motor Operated Tools - Part 2 : Particular Specifications 1981 CENELEC 0 6729 HD 410.2 Specification for Press Board and Press Paper for Electric Purposes Part 2: Method of Test 1980 CENELEC 0 6730 HD 403 Standard Method of Measurement of Lamp Cap Temperature Rise 1980 CENELEC 0 6731 HD 401 Safety Requirements for Electronic Measuring Apparatus 1980 CENELEC 0 6732 HD 388 Transformers for Tubular Discharge Lamps Having a No-Load Output Voltage Exceeding 1000 V (Generally Called Neon- 1980 CENELEC 0 Transformers) 6733 HD 415 Detection and Determination of Specified Anti-Oxydant Additives in Insulating Oils 1980 CENELEC 0 6734 HD 414.1 An Interface System for Programmable Measuring Instruments (Byte Serial, Bit Parallel) Part 1: Functional Specifications, 1980 CENELEC 0 Electrical Specifications System Application and Requirements for the Designer and User 6735 HD 413.1 Operating Conditions for Industrial - Process Measurement and Control Equipment Part 1: Temperature Humidity and 1980 CENELEC 0 Barometric Pressure 6736 HD 398.2 Power Transformers Part 2: Temperature Rise 1980 CENELEC 0 6737 HD 404 Test Procedures for Amplifiers and Preamplifiers for Semiconductor Detectors for Ionizing Radiation 1980 CENELEC 0 6738 HD 427 Specific Safety Rules for the Installation of Equipment for Electric Arc Welding and Allied Processes 1980 CENELEC 0 6739 HD 220 S2 Safety Requirements for Radio Transmitting Equipment 1980 CENELEC 0 6740 HD 410.1 Specification for Pressboard and Presspaper for Electric Purposes Part 1: Definitions and General Requirements 1980 CENELEC 0 6741 HD 413.2 Operating Conditions for Industrial Process Measurement and Control Equipment Part 2: Power 1980 CENELEC 0 6742 HD 123.6 S2 Hollow Metallic Waveguides Part 6 Relevant Specification for Medium Flat Rectangular Waveguides 1980 CENELEC 0 6743 EN 50042 Low voltage switchgear and controlgear for industrial use Terminal marking Terminals for external associated electronic 1980 CENELEC 0 circuit components and contacts 6744 HD 261 Particular Specification for Kitchen Machines 1980 CENELEC 0 6745 HD 408 Alternating Current Disconnectors (Isolators) and Earthing Switches 1979 CENELEC 0 6746 HD 348 S2 High-voltage Alternating- Current Circuit-Breakers 1979 CENELEC 0 6747 HD 396 Definitions of Test Method Terms for Semiconductor Radiation Detectors and Scintillation Counting 1979 CENELEC 0 6748 HD 42.2 S2 Basic Dimensions of Winding Wires - Part 2: Maximum Over-All Diameters of Enamelled Round Winding Wires 1979 CENELEC 0 6749 HD 245.1 S3 Letter Symbols to be Used in Electrical Technology - Part 1: General 1979 CENELEC 0 6750 HD 394.1 Specification for Conduits for Electrical Installations Part 1 General Requirements 1979 CENELEC 0 6751 HD 399 Measurement of Transformer and Reactor Sound Level 1979 CENELEC 0 6752 HD 389 Safety Rules Concerning Electrical Equipment of Machines for Resistance Welding and Allied Processes 1979 CENELEC 0 6753 HD 393 Outside Diameters of Conduits for Electrical Installations and Threads for Conduits and Fittings 1979 CENELEC 0 6754 HD 400.2 Hand-Held Motor Operated Tools Part II: Particular Specifications Sections A to G (CEE 20, Part II, Sections A to G, 1979 CENELEC 0 Modified) 6755 HD 395.1 Safety of Medical Electrical Equipment Part 1 General Requirements 1979 CENELEC 0 6756 HD 309.2 Class 2 Direct Connected Alternating-Current Watthour Meter Part II 1979 CENELEC 0 6757 HD 407 Safety Rules for the Use of Equipment for Electric Arc Welding and Allied Processes 1979 CENELEC 0 6758 HD 398.4 Power Transformers Part 4: Tappings and Connections 1979 CENELEC 0 6759 HD 309.1 Class 2 Direct Connected Alternating-Current Watthour Meters Part I 1979 CENELEC 0 6760 HD 398.1 Power Transformers Part 1: General 1979 CENELEC 0 6761 HD 381 Methods of Test for the Determination of Ionic Impurities in Electrical Insulating Materials by Extraction with Liquids 1979 CENELEC 0 6762 HD 387 Interconnections Between Video-Tape Recorders and Television Receivers for 50Hz Systems 625 Lines 1979 CENELEC 0 6763 HD 236.5 S4 Methods of Measurement for Radio Transmitters - Part 5: Measurements Particular to Transmitters and Transposers for 1979 CENELEC 0 Monochrome and Colour Television 6764 HD 398.1/A1 AMD 1 Power Transformers Part 1: General 1979 CENELEC 0 6765 HD 390 Inductive Voltage Dividers 1979 CENELEC 0 6766 HD 369.1 Audio-Visual, Video and Television Equipment and Systems Part 1: General 1978 CENELEC 0 6767 HD 373 Interface Between Numerical Controls and Industrial Machines 1978 CENELEC 0 6768 HD 42.3 S2 Basic Dimensions of Winding Wires - Part 3: Dimensions of Conductors of Rectangular Copper Winding Wires 1978 CENELEC 0 6769 HD 372 Safety of Electrically Energized Office Machines 1978 CENELEC 0 6770 HD 382 Determination of the Aromatic Hydrocarbon Content of New Mineral Insulating Oils 1978 CENELEC 0 6771 HD 27 Colours of the Cores of Flexible Cables and Cords 1978 CENELEC 0 6772 HD 362/A1 AMD 1 Safety Rules for the Construction of Equipment for Electric Arc Welding and Allied Processes 1978 CENELEC 0 6773 HD 378 Methods to be Used for Measuring Energy Consumption of Electric Automatic Dishwashers for Cold Water Supply Only, 1978 CENELEC 0 for Household Use and for the Purpose of Informing Consumers of It 6774 HD 261.3 Particular Specification for Kitchen Machines 1978 CENELEC 0 6775 HD 369.2 Audio-Visual, Video and Television Equipment and Systems Part 2: Explanation of General Terms 1978 CENELEC 0 6776 HD 236.4 S2 Methods of Measurement for Radio Transmitters - Part 4: Amplitude/ Frequency Characteristics and Non- Linearity 1978 CENELEC 0 Distortion in Transmitters for Radiotelephony and Sound Broadcasting 6777 HD 251.2 General Specification for Electric Cooking and Heating Appliances for Household and Similar Purposes 1978 CENELEC 0 6778 HD 95.1 Aerials for the Reception of Sound and Television Broadcasting in the Frequency Range 30 MHz to 2 GHz Part 1: 1978 CENELEC 0 Electrical and Mechanical Characteristics 6779 HD 379 Area Exposure Product Meter 1978 CENELEC 0 6780 HD 95.2 Aerials for the Reception of Sound and Television Broadcasting in the Frequency Range 30 MHz to 2 GHz Part 2: Methods 1978 CENELEC 0 of Measurement of Electrical Performance Parameters 6781 HD 337 S2 Processed Disk Records and Reproducing Equipment 1978 CENELEC 0 6782 HD 262.2 Particular Specification for Portable Immersion Heaters 1978 CENELEC 0 6783 HD 368 Direct Acting Recording Electrical Measuring Instruments and Their Accessories 1977 CENELEC 0 6784 HD 266.2 Particular Specification for Appliances for Skin and Hair Treatment 1977 CENELEC 0 6785 HD 312 Documentation to Be Supplied with Electronic Measuring Apparatus 1977 CENELEC 0 6786 HD 129.7 Flanges for Waveguides Part 7: Relevant Specifications for Flanges for Circular Waveguides 1977 CENELEC 0 6787 HD 87 Testing and Calibration of Ultrasonic Therapeutic Equipment 1977 CENELEC 0 6788 HD 262 Particular Specification for Portable Immersion Heaters 1977 CENELEC 0 6789 HD 304 Dimensions of Plugs for Hearing Aids 1977 CENELEC 0 6790 HD 367 On-Load Tap-Changers 1977 CENELEC 0 6791 HD 259.2 Particular Specification for Food Waste Disposal Units 1977 CENELEC 0 6792 HD 148 S2 Methods for the Measurement of Direct Interelectrode Capacitances of Electronic Tubes and Valves 1977 CENELEC 0 6793 EN 50013 Low voltage switchgear and controlgear for industrial use Terminal marking and distinctive number for particular control 1977 CENELEC 0 switches 6794 HD 347 Mechanical Vibration of Certain Rotating Electrical Machinery with Shaft Heights Between 80 and 400 mm Measurement 1977 CENELEC 0 and Evaluation of the Vibration Severity 6795 HD 261.2 Particular Specification for Kitchen Machines 1977 CENELEC 0 6796 HD 363 Dimensions of Spindle Ends for Manually Operated Electronic Components 1977 CENELEC 0 6797 EN 50011 Low voltage switchgear and controlgear for industrial use Terminal marking, distinctive number and distinctive letter for 1977 CENELEC 0 particular contactor relays 6798 HD 250.2 General Specification for Electric Motor Operated Appliances for Household and Similar Purposes 1977 CENELEC 0 6799 HD 323.2.2 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test B: Dry Heat 1977 CENELEC 0 6800 HD 46.3 Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools for Winding Wires 1976 CENELEC 0 6801 HD 329 Test on Hollow Insulators for Use in Electrical Equipment 1976 CENELEC 0 6802 HD 362 Safety Rules for the Construction of Equipment for Electric Arc Welding and Allied Processes 1976 CENELEC 0 6803 HD 134.7 Radio-Frequency Connector Part 7: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 9.5mm (0.374 in) 1976 CENELEC 0 with Bayonet Lock-Characteristic Impedance 50 Ohms (Type C) 6804 HD 356 Radiographic Cassettes 1976 CENELEC 0 6805 HD 323.2.5 S1 Basic Environmental Testing Procedures - Part 2: Tests. Test SA: Simulated Solar Radiation at Ground Level 1976 CENELEC 0 6806 HD 134.6 Radio-Frequency Connectors Part 6: R.F. Coaxial Connectors for Cables 96 IEC 75-17 and Larger 1976 CENELEC 0 6807 HD 409 Guide to the Testing of Circuit-Breakers with Respect to out-of-Phase Switching 1976 CENELEC 0 6808 HD 351.1 Rigid Precision Coaxial Lines and Their Associated Precision Connectors Part 1: General Requirements and Measuring 1976 CENELEC 0 Methods 6809 HD 330 Hand and/or Foot Contamination Monitors and Warning Assemblies 1976 CENELEC 0 6810 HD 350.2 General Purpose Rigid Coaxial Transmission Lines and Their Associated Flange Connectors Part 1: Detail Specifications 1976 CENELEC 0 6811 HD 355 High Voltage Switches 1976 CENELEC 0 6812 HD 308 Identification and Use of Cores of Flexible Cables 1976 CENELEC 0 6813 HD 345 Test of the Insulation of Bars and Coils of High Voltage Machines 1976 CENELEC 0 6814 EN 50005 Low Voltage Switchgear and Controlgear for Industrial Use Terminal Marking and Distinctive Number General Rules 1976 CENELEC 0 6815 HD 259 Particular Specification for Food Waste Disposal Units 1976 CENELEC 0 6816 HD 351.2 Rigid Precision Coaxial Lines and Their Associated Precision Connectors Part 2: 50ohm 7mm Rigid Precision Coaxial 1976 CENELEC 0 Line and Associated Hermaphroditic Precision Coaxial Connector 6817 HD 350.1 General Purpose Rigid Coaxial Transmission Lines and Their Associated Flange Connectors Part 1: General Requirements 1976 CENELEC 0 and Measuring Methods 6818 HD 339 Series Capacitors for Power Systems 1976 CENELEC 0 6819 HD 326 Electrical Measuring Instruments Utilizing Radio- Active Sources 1976 CENELEC 0 6820 HD 268 Particular Specification for Clothes Dryers of the Tumbler Type 1976 CENELEC 0 6821 HD 246.5 Diagrams, Charts, Tables Part 5: Preparation of Interconnection Diagrams and Tables 1976 CENELEC 0 6822 HD 331 Standard Direction of Movement for Actuators Which Control the Operation of Electrical Apparatus 1976 CENELEC 0 6823 HD 123.2 Hollow Waveguides Part 2: Relevant Specifications for Ordinary Rectangular Waveguides 1976 CENELEC 0 6824 HD 245.3 Letter Symbols to be Used in Electrical Technology Part 3: Logarithmic Quantities and Units 1976 CENELEC 0 6825 HD 324 Identification of Insulated and Bare Conductors by Colours 1976 CENELEC 0 6826 HD 134.5 Radio-Frequency Connectors Part 5: R.F. Coaxial Connectors for Cables 96 IEC 50-17 and Larger 1976 CENELEC 0 6827 HD 352.2 Specification for Insulating Materials Based on Built-up Mica or Treated Mica Paper Part 2: Methods of Test 1976 CENELEC 0 6828 HD 353 General Test Conditions for Industrial Electro- Heating Equipment 1976 CENELEC 0 6829 HD 266 Particular Specification for Appliances for Skin or Hair Treatment 1975 CENELEC 0 6830 HD 262 S1 Particular Specification for Portable Immersion Heaters 1975 CENELEC 0 6831 HD 236.3 Methods of Measurement for Radio Transmitters Part 3: Wanted and Unwanted Modulation 1975 CENELEC 0 6832 HD 251 General Specification for Electric Cooking and Heating Appliances for Household and Similar Purposes 1975 CENELEC 0 6833 HD 123.7 Hollow Metallic Waveguides Part 7: Relevant Specifications for Square Waveguides 1975 CENELEC 0 6834 HD 305 IEC Reference Coupler for the Measurement of Hearing Aids Using Earphones Coupled to the Ear by Means of Ear Inserts 1975 CENELEC 0 6835 HD 303 Test Procedures for Germanium Gamma-Ray Detectors 1975 CENELEC 0 6836 EN 50006 The Limitation of Disturbances in Electricity Supply Networks Caused by Domestic and Similar Appliances Equipped with 1975 CENELEC 0 Electronic Devices 6837 HD 42.4 Basic Dimensions of Winding Wires Part 4: Diameters of Conductors for Round Resistance Wires 1975 CENELEC 0 6838 HD 246.2 Diagrams, Charts, Tables Part 2: Item Designation 1975 CENELEC 0 6839 HD 249 Laboratory D.C. Resistors 1975 CENELEC 0 6840 HD 236.1 Methods of Measurement for Radio Transmitters Part 1: General Conditions of Measurement, Frequency, Output Power 1975 CENELEC 0 and Power Consumption 6841 HD 302 Transistorized Ballast for Fluorescent Lamps 1975 CENELEC 0 6842 HD 301 Indirect Acting Electrical Measuring Instruments 1975 CENELEC 0 6843 HD 236.2 Methods of Measurement for Radio Transmitters Part 2: Bandwidth, Out- of-Band Power and Power of Non-Essential 1975 CENELEC 0 Oscillations 6844 HD 123.4 Hollow Metallic Waveguides Part 4: Relevant Specifications for Circular Waveguides 1975 CENELEC 0 6845 HD 260 Particular Specification for Coffee Grinders and Mills 1975 CENELEC 0 6846 HD 242 Maximum Case Dimensions for Capacitors and Resistors 1975 CENELEC 0 6847 HD 196 Plugs, Sockets - Outlets and Couplers for Industrial Purposes 1975 CENELEC 0 6848 HD 53.6 Rotating Electrical Machines Part 6: Methods of Cooling Rotating Machinery 1974 CENELEC 0 6849 HD 91 Rules for Ohmic Resistors Used in the Power Circuits of Electrically Powered Vehicles 1974 CENELEC 0 6850 HD 252 Particular Specification for Vacuum Cleaners and Water Suction Cleaning Appliances 1974 CENELEC 0 6851 HD 250 General Specification for Electric Motor Operated Appliances for Household and Similar Purposes 1974 CENELEC 0 6852 HD 147 Preparation of Outline Drawings of Oscilloscope and Picture Tubes 1974 CENELEC 0 6853 HD 253 Particular Specification for Electric Irons, Ironess and Pressing Machines 1974 CENELEC 0 6854 HD 215 Safety Requirements for Indicating and Recording Electrical Instruments and Their Accessories 1974 CENELEC 0 6855 HD 123.3 Hollow Metallic Waveguides Part 3: Relevant Specifications for Flat Rectangular Waveguides 1974 CENELEC 0 6856 HD 138 Sealing Test for Pressurized Waveguide Tubing and Assemblies 1974 CENELEC 0 6857 HD 134.1 Radio-Frequency Connectors Part 1: General Requirements and Measuring Methods 1974 CENELEC 0 6858 HD 120 Characteristic Impedances and Dimensions of Radio Frequency Coaxial Cables 1974 CENELEC 0 6859 HD 93.2 Part 2: Electrical Equipment of Machines Used in Large Series Production Lines 1974 CENELEC 0 6860 HD 123.1 Hollow Metallic Waveguides Part 1: General Requirements and Measuring Methods 1974 CENELEC 0 6861 HD 145 Numbering of Electrodes and Designation of Units in Electronic Tubes and Valves 1974 CENELEC 0 6862 HD 231 Dimensions of Three-Phase Induction Motors 1974 CENELEC 0 6863 HD 46.1 Packaging of Winding Wires Part 1: Containers for Round Winding Wires 1974 CENELEC 0 6864 HD 194 Requirements Concerning the Electrical Safety of Laser - Apparatus and Installations 1974 CENELEC 0 6865 HD 92 Mains Operated Electric Fence Controllers 1974 CENELEC 0 6866 HD 178 Methods for Specifying the Characteristics of Electro- Mechanical Transducers for Shock and Vibration Measurements 1974 CENELEC 0 6867 HD 225 Rules for Rotating Electrical Machines for Rail and Road Vehicles 1974 CENELEC 0 6868 HD 134.3 Radio Frequency Connectors Part 3: Two Pin Connector for Twin Balanced Aerial Feeders 1974 CENELEC 0 6869 HD 119 Fuse-Holders for Miniature Cartridge Fuse-Links 1974 CENELEC 0 6870 HD 222 Standard Sheets for Barrel Thread for E14 and E27 Lampholder with Shade Holder Ring 1974 CENELEC 0 6871 HD 97 Recommended Methods of Measurement on Receivers for Frequency-Modulation Broadcast Transmissions 1974 CENELEC 0 6872 HD 24 No - Load Voltage of Arc - Welding Equipment 1973 CENELEC 0 Hercules Ebooks Institute www.herculesebooks.com [email protected] +989141908737