DOCSLIB.ORG

Nr. Standard Reference Title 1 IEC 60079:2019 SER 2

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Nr. Standard Reference Title 1 IEC 60079:2019 SER 2 Nr. Standard reference Title 1 IEC 60079:2019 SER Explosive atmospheres - ALL PARTS IEC 61097- Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship 2 4:2012+AMD1:2016+AM earth station and Inmarsat enhanced group call (EGC) equipment - Operational and D2:2019 CSV performance requirements, methods of testing and required test results Amendment 2 - Global maritime distress and safety system (GMDSS) - Part 4: IEC 61097- Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - 3 4:2012/AMD2:2019 Operational and performance requirements, methods of testing and required test results Medical electrical equipment - Part 2-60: Particular requirements for the basic 4 IEC 80601-2-60:2019 safety and essential performance of dental equipment Semiconductor devices - Part 16-6: Microwave integrated circuits - Frequency 5 IEC 60747-16-6:2019 multipliers Semiconductor devices - Mechanical and climatic test methods - Part 20-1: 6 IEC 60749-20-1:2019 Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat Semiconductor devices - Mechanical and climatic test methods - Part 20-1: 7 IEC 60749-20-1:2019 RLV Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen 8 IEC 61207-3:2019 analysers Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen 9 IEC 61207-3:2019 RLV analysers Video surveillance systems for use in security applications - Part 2-31: Live 10 IEC 62676-2-31:2019 streaming and control based on web services Video surveillance systems for use in security applications - Part 2-32: Recording 11 IEC 62676-2-32:2019 control and replay based on web services Workplace atmospheres - Part 1: Gas detectors – Performance requirements of 12 IEC 62990-1:2019 detectors for toxic gases 13 IEC 63119-1:2019 Information exchange for electric vehicle charging roaming service - Part 1: General Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-506: General test methods for materials and 14 IEC TR 61189-5-506:2019 assemblies - An intercomparison evaluation to implement the use of fine-pitch test structures for surface insulation resistance (SIR) testing of solder fluxes in accordance with IEC 61189-5-501 Guideline for the system design of HVDC converter stations with line-commutated 15 IEC TR 63127:2019 converters Piezoelectric, dielectric and electrostatic devices and associated materials for 16 IEC TS 61994-5:2019 frequency control, selection and detection - Glossary - Part 5: Piezoelectric sensors Industrial-process measurement, control and automation - Part 1: System interface 17 IEC TS 62872-1:2019 between industrial facilities and the smart grid CISPR 16-2- Specification for radio disturbance and immunity measuring apparatus and methods 18 - Part 2-3: Methods of measurement of disturbances and immunity - Radiated 3:2016+AMD1:2019 CSV disturbance measurements CISPR 16-2- Amendment 1 - Specification for radio disturbance and immunity measuring 19 apparatus and methods - Part 2-3: Methods of measurement of disturbances and 3:2016/AMD1:2019 immunity - Radiated disturbance measurements IEC 60034-18- Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation 20 41:2014+AMD1:2019 systems (Type I) used in electrical rotating machines fed from voltage converters - CSV Qualification and quality control tests IEC 60034-18- Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free 21 electrical insulation systems (Type I) used in electrical rotating machines fed from 41:2014/AMD1:2019 voltage converters - Qualification and quality control tests 22 IEC 60034:2019 SER Rotating electrical machines - ALL PARTS Safety requirements for electrical equipment for measurement, control and 23 IEC 61010-2-032:2019 laboratory use - Part 2-032: Particular requirements for hand-held and hand- manipulated current sensors for electrical test and measurement IEC 61010-2-032:2019 Safety requirements for electrical equipment for measurement, control and 24 laboratory use - Part 2-032: Particular requirements for hand-held and hand- RLV manipulated current sensors for electrical test and measurement Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and 25 IEC 61010-2-033:2019 other meters for domestic and professional use, capable of measuring mains voltage Safety requirements for electrical equipment for measurement, control, and IEC 61010-2-033:2019 laboratory use - Part 2-033: Particular requirements for hand-held multimeters and 26 RLV other meters for domestic and professional use, capable of measuring mains voltage Information technology - Multimedia application format (MPEG-A) - Part 22: Multi- 27 ISO/IEC 23000-22:2019 image application format (MIAF) Environmental testing – Part 2-85: Tests – Test Fj: Vibration - Long time history 28 IEC 60068-2-85:2019 replication 29 IEC 60068-2:2019 SER Environmental testing - Part 2: Tests - ALL PARTS Household and similar electrical appliances - Safety - Part 2-89: Particular 30 IEC 60335-2-89:2019 requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor Industrial communication networks - Fieldbus specifications - Part 6-10: Application 31 IEC 61158-6-10:2019 layer protocol specification – Type 10 elements Industrial communication networks - Fieldbus specifications - Part 6-12: Application 32 IEC 61158-6-12:2019 layer protocol specification – Type 12 elements Industrial communication networks - Fieldbus specifications - Part 6-19: Application 33 IEC 61158-6-19:2019 layer protocol specification – Type 19 elements Industrial communication networks - Fieldbus specifications - Part 6-21: Application 34 IEC 61158-6-21:2019 layer protocol specification – Type 21 elements Industrial communication networks - Fieldbus specifications - Part 6-23: Application 35 IEC 61158-6-23:2019 layer protocol specification – Type 23 elements Industrial communication networks - Fieldbus specifications - Part 6-25: Application 36 IEC 61158-6-25:2019 layer protocol specification – Type 25 elements Industrial communication networks - Fieldbus specifications - Part 6-26: Application 37 IEC 61158-6-26:2019 layer protocol specification – Type 26 elements Industrial communication networks - Fieldbus specifications - Part 6-2: Application 38 IEC 61158-6-2:2019 layer protocol specification – Type 2 elements Industrial communication networks - Fieldbus specifications - Part 6-3: Application 39 IEC 61158-6-3:2019 layer protocol specification – Type 3 elements Industrial communication networks - Fieldbus specifications - Part 6-4: Application 40 IEC 61158-6-4:2019 layer protocol specification – Type 4 elements High-voltage switchgear and controlgear - Part 214: Internal arc classification for 41 IEC 62271-214:2019 metal-enclosed pole-mounted switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV 42 IEC 62271:2019 SER High-voltage switchgear and controlgear - ALL PARTS Photovoltaic cells - Part 1: Measurement of light-induced degradation of crystalline 43 IEC 63202-1:2019 silicon photovoltaic cells ISO/IEC 14543-5- Information technology - Home electronic system (HES) architecture - Part 5-101: 44 Intelligent grouping and resource sharing for HES Class 2 and Class 3 - Remote 101:2019 media access profile Information technology database languages - SQL - Part 15: Multi-dimensional 45 ISO/IEC 9075-15:2019 arrays (SQL/MDA) IEC 60068-2- Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of 46 69:2017+AMD1:2019 electronic components and printed boards by the wetting balance (force CSV measurement) method IEC 60068-2- Amendment 1 - Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability 47 testing of electronic components and printed boards by the wetting balance (force 69:2017/AMD1:2019 measurement) method Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas 48 IEC 61207-2:2019 utilizing high-temperature electrochemical sensors Railway applications - DC surge arresters and voltage limiting devices - Part 2: 49 IEC 62848-2:2019 Voltage limiting devices Industrial systems, installations and equipment and industrial products - Structuring 50 IEC 81346-2:2019 principles and reference designations - Part 2: Classification of objects and codes for classes Marine energy - Wave, tidal, and other water current converters - Part 20: Design 51 IEC TS 62600-20:2019 and analysis of an Ocean Thermal Energy Conversion (OTEC) plant - General guidance Marine energy - Wave, tidal and other water current converters - Part 40: Acoustic 52 IEC TS 62600-40:2019 characterization of marine energy converters 53 IEC/IEEE 60214-2:2019 Tap-changers - Part 2: Application guidelines ISO/IEC Amendment 2 - Information technology - Universal Coded Character Set (UCS) - 54 10646:2017/AMD2:2019 Nandinagari, Georgian extension, and other characters 55 IEC 31010:2019 Risk management - Risk assessment techniques Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific 56 IEC TS 61980-2:2019 requirements for communication between electric road vehicle (EV) and infrastructure Electric vehicle wireless power transfer (WPT) systems
Load more

Recommended publications
  • Sfs-Standardit 2019
    SESKOn alueelta julkaistut SFS-STANDARDIT 2019 SISÄLTÖ Johdanto 2 Kaaviot IEC-, EN- ja SFS-EN-standardien valmistelu (rinnakkaismenettely), EN- ja SFS-standardien valmistelu (ilman rinnakkaismenettelyä), SFS-standardien valmistelu Suomalaiset SFS-standardit ja 5 suomenkielisinä julkaistut SFS-EN-standardit Englanninkielisinä julkaistut SFS-standardit 6 SFS-käsikirjat 28 www.sesko.fi SESKOn alueelta julkaistut SFS-standardit 2019 2 SESKOn alueelta julkaistut SFS-standardit 2019 Johdanto Kansallisista SFS-standardeista on suurin osa SFS-EN-standardeja, sillä EN-standardit on saatettava identtisiksi SFS-EN-standardeiksi. Suunnilleen 85 % sähköalan EN-standardeista perustuu IEC-standardeihin ja tarvittaessa niitä on täydennetty yhteiseurooppalaisilla muutoksilla. IEC-standardeja ja muita IEC- julkaisuja on voimassa noin 7700 kpl. IEC:n ja CENELECin Frankfurtin sopimuksen mukaisesti rinnakkaismenettelyllä valmisteltujen EN- standardien tunnuksissa on sovellettu vuoden 2018 alusta lähtien seuraavaa: • IEC-standardien kanssa identtisten eurooppalaisten CENELEC-standardien tunnukset ovat muotoa EN IEC 6xxxx. • Jos IEC-standardeihin perustuviin eurooppalaisiin standardeihin tarvitaan yhteiseurooppalaisia muutoksia, niin ne esitetään muutososissa, jotka numeroidaan A11 (EN IEC 6xxxx/A11). Jos IEC ei ole kiinnostunut laatimaan kansainvälistä standardia tietyltä alueelta, niin CENELEC laatii tällöin puhtaasti eurooppalaisen EN-standardin (home grown), joka julkaistaan tunnuksin EN 5xxxx. Näitä standardeja on noin 15 % kaikista eurooppalaisista julkaisuista.
    [Show full text]
  • Sähköauton Latausjärjestelmien Tiedonsiirto
    SÄHKÖAUTON LATAUSJÄRJESTELMIEN TIEDONSIIRTO Aleksi Heikkilä Opinnäytetyö Toukokuu 2019 Sähkö- ja automaatiotekniikan koulutus Sähkövoimatekniikka TIIVISTELMÄ Tampereen ammattikorkeakoulu Sähkö- ja automaatiotekniikan koulutus Sähkövoimatekniikka HEIKKILÄ, ALEKSI: Sähköauton latausjärjestelmien tiedonsiirto Opinnäytetyö 39 sivua, joista liitteitä 5 sivua Toukokuu 2019 Tämän opinnäytetyön tarkoituksena on tutustua sähköautojen latausjärjestelmiin ja niiden tiedonsiirtoon. Työssä tarkastellaan latausasemien vaatimia standardeja ja lataustapoja. Työssä tutustutaan myös latausasemien taustajärjestelmiin ja niiden eri sovelluksiin. Sähköautojen lataamiseen liittyvät ratkaisut muuttuvat usein ja valmistajat tekevät omia ratkaisujaan latausasemien suunnittelussa. Tämän takia on kehitetty OCPP-protokolla, jonka tarkoituksena on luoda avoin kommunikaatioväylä kaikkiin sähköauton latausso- velluksiin. OCPP-protokollan ansiosta saadaan yhtenäinen kommunikointiväylä la- tausoperaattorin ja latausaseman välille. Sähköautojen latausasemiin on saatavilla erinäköisiä ratkaisuja erilaisiin kohteisiin. La- tausasemien ominaisuudet vaihtelevat niiden valmistajan ja käyttötarkoituksen mukaan. Osaa latausasemista käytetään offline-tilassa ilman erillistä ohjausta ja osaa kytkettynä taustajärjestelmiin, joilla voidaan ohjata ja rajoittaa lataustehoa. Kuormanhallintaominai- suudet älykkäässä latauksessa ovat erittäin tärkeitä, jotta ilman suuria muutoksia voidaan saada enemmän latausasemia lisättyä jo ennalta asennettujen rinnalle. Asiasanat: sähköauto, tiedonsiirto,
    [Show full text]
  • IEC 63110 Management of EV Charging / Discharging Infrastructure
    IEC 63110 Management of Electric Vehicles charging and discharging infrastructures IEC 63110 Management of EV charging / discharging infrastructure Paul Bertrand IEC convener of IEC JWG1 (ISO/IEC 15118) IEC convener of JWG11 (IEC 63110) [email protected] 15/01/2020 IEC 63110 presentation 1 IEC 63110 Management of Electric Vehicles charging and discharging infrastructures Summary of the presentation • A perspective of e-mobility standards landscape • Zoom on IEC 63110 : management of charging-discharging infrastructure • IEC 63110 organisation, members and scope • Communication architecture • Requirements and transport technology • Use cases and object model • Sessions and Transactions • Interconnections with other standards • Conclusion 15/01/2020 IEC 63110 presentation 2 IEC 63110 Management of Electric Vehicles charging and discharging infrastructures A perspective of e-mobility standards landscape 15/01/2020 IEC 63110 presentation 3 IEC 63110 Management of Electric Vehicles charging and discharging infrastructures What is in stake with E-mobility in the future ? In 2020 : an emerging new mobility environment Around 5 millions of EVs are circulating in the world More or less 1 million of public charging stations are deployed today Industry is learning and coping with e-mobility needs in more cities every day Large utilities are engaged in massive investments to support the increasing demand of electricity due to E-mobility Smart Charging and V2G are now in the agenda of all stakeholders After 2040 as the number of EVs is now
    [Show full text]
  • Electricity Engineering Standards Review: Technical Analysis of Topic
    Electricity Engineering Standards Review Technical Analysis of Topic Areas Report prepared for BEIS Final December 2020 SYSTEMS AND ENGINEERING TECHNOLOGY FNC 62482/50117R FINAL Issue Authors The primary authors of this report are Steven Fletcher, Thomas Bransden and John Devlin. For any inquiries regarding this work please contact [email protected] Acknowledgements We would like to thank Professor Keith Bell from the University of Strathclyde who provided guidance and advice to the project team. Frazer-Nash worked closely with the Panel in the development of this report and appreciated their expert input throughout the course of the project. During the project, Frazer-Nash and the Panel engaged a number of industry stakeholders. We would like to acknowledge all those who engaged and thank them for the input provided. We are also grateful for the support provided by BEIS and Ofgem in delivering this work. Please note This publication and the advice contained within has been prepared by Frazer-Nash Consultancy Ltd with the specific needs of BEIS and the Panel in mind under their instruction. Frazer-Nash Consultancy Ltd cannot guarantee the applicability of the advice contained within this publication for the needs of any third party and will accept no liability for loss or damage suffered by any third party. Frazer-Nash Consultancy Ltd would therefore advise any third party to seek their own confirmation of the detail contained within for their specific requirements. © FNC 2020 Page 2 of 161 FNC 62482/50117R FINAL Issue EXECUTIVE SUMMARY The UK government has commissioned an independent panel of experts to conduct an Electricity Engineering Standards Review1.
    [Show full text]
  • Einführung / Introduction
    Zur Kritik vorgelegte Entwürfe Im Hinblick auf die spätere Übernahme in das Normenwerk von Electrosuisse werden folgende Entwürfe zur Stellungnahme ausgeschrieben. Alle an der Materie Interessierten sind hiermit eingeladen, diese Entwürfe zu prüfen und eventuelle Stellungnahmen dazu Electrosuisse schriftlich einzureichen. Die ausgeschriebenen Entwürfe (im Normenshop nicht aufgeführt) können gegen Kostenbeteiligung beim Normenverkauf, Electrosuisse, Luppmenstrasse 1, 8320 Fehraltorf, Tel. 044 956 11 65, Fax 044 956 14 01, [email protected], bezogen werden. Projets de normes mis à l'enquête En vue d’une reprise ultérieure dans le recueil des normes d’Electrosuisse, les projets suivants sont mis à l’enquête pour prise de position. Tous les intéressés en la matière sont invités à étudier ces projets et à adresser, par écrit, leurs observations éventuelles à Electrosuisse. Les projets mis à l’enquête (non mentionnés au shop en ligne) peuvent être obtenus, moyennant une participation aux frais, auprès d’Electrosuisse, Vente des normes, Luppmenstrasse 1, 8320 Fehraltorf, tél. 044 956 11 65, fax 044 956 14 01, [email protected]. TK 29 Einsprachetermin/ délai d'envoi des observations: 2020-02-13 29/1038/CDV - Draft IEC//EN IEC 60263 Scales and sizes for plotting frequency characteristics and polar diagrams TK 34 Einsprachetermin/ délai d'envoi des observations: 2020-01-23 34A/2160/CDV - Draft IEC//EN IEC 61228 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method TK 40 Einsprachetermin/ délai d'envoi des observations: 2020-01-30 40/2704/CDV - Draft IEC//EN IEC 60384-13 Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c.
    [Show full text]
  • The Electric Drive Continues Hev Tcp Annual Report 2021
    THE ELECTRIC DRIVE CONTINUES HEV TCP ANNUAL REPORT 2021 This is the 2021 Annual report for the HEV TCP – an international collaboration of 18 countries exploring cutting-edge questions in hybrid and electric vehicles. This report sets out the background to the partnership, gives updates on ongoing projects and on member countries’ work, and gives a set of contact details for more information. Implementing Agreement for Co-operation on Hybrid and Electric Vehicle Technologies and Programmes (HEV TCP) is an international membership group formed to produce and disseminate balanced, objective information about advanced electric, hybrid, and fuel cell vehicles. It enables member countries to discuss their respective needs, share key information, and learn from an ever-growing pool of experience from the development and deployment of hybrid and electric vehicles. The TCP on Hybrid and Electric Vehicles (HEV TCP) is organised under the auspices of the International Energy Agency (IEA) but is functionally and legally autonomous. Views, findings and publications of the HEV TCP do not necessarily represent the views or policies of the IEA Secretariat or its ieahev.org individual member countries. Editors Contributing Authors Kate Palmer, Task 1 OA AUSTRIA NORWAY Urban Foresight Mauritsch Walter, Austria Tech Andreas Bratland, The Research Council of Norway Gerfried Jungmeier, Joanneum Research Erik Figenbaum, TOI Lauren Kersley Andreas Dorda, BMK Jon Suul, Sintef Urban Foresight BELGIUM REPUBLIC OF KOREA Miles Prescott Carlo Mol, VITO Ock-Taek Lim,
    [Show full text]
  • Canadian Data Governance Standardization Roadmap B
    Canadian Data Governance Standardization Roadmap b Canadian Data Governance Standardization Roadmap Table of contents Acknowledgements ................................................................................................................. 2 Message from the Co-Chairs of the Data Governance Standardization Collaborative .............................................................................................. 3 Message from the CEO, Standards Council of Canada .................................................. 4 Executive Summary ................................................................................................................ 5 How to Use this Report ............................................................................................................7 About Standards and Conformity Assessment ..................................................................................7 About the Collaborative ................................................................................................................................... 8 Reading the Roadmap ..................................................................................................................................... 8 Standardization and Data Governance in Canada ..........................................................10 State of Play ........................................................................................................................................................10 Tackling the Challenges and Identifying the Opportunities
    [Show full text]
  • Understanding Advanced Features and Implementation in the Context of ISO 15118: Use Cases and Recommendations
    Understanding advanced features and implementation in the context of ISO 15118: use cases and recommendations Eurelectric recommendations [July 2020] Eurelectric represents the interests of the electricity industry in Europe. Our work covers all major issues affecting our sector. Our members represent the electricity industry in over 30 European countries. We cover the entire industry from electricity generation and markets to distribution networks and customer issues. We also have affiliates active on several other continents and business associates from a wide variety of sectors with a direct interest in the electricity industry. We stand for The vision of the European power sector is to enable and sustain: - A vibrant competitive European economy, reliably powered by clean, carbon-neutral energy - A smart, energy efficient and truly sustainable society for all citizens of Europe We are committed to lead a cost-effective energy transition by: investing in clean power generation and transition-enabling solutions, to reduce emissions and actively pursue efforts to become carbon- neutral well before mid-century, taking into account different starting points and commercial availability of key transition technologies; transforming the energy system to make it more responsive, resilient and efficient. This includes increased use of renewable energy, digitalisation, demand side response and reinforcement of grids so they can function as platforms and enablers for customers, cities and communities; accelerating the energy transition in other economic sectors by offering competitive electricity as a transformation tool for transport, heating and industry; embedding sustainability in all parts of our value chain and take measures to support the transformation of existing assets towards a zero carbon society; innovating to discover the cutting-edge business models and develop the breakthrough technologies that are indispensable to allow our industry to lead this transition.
    [Show full text]
  • OVE Standardization News Monatliche Neuerscheinungen Und Informationen Zur Elektrotechnischen Normung Und Standardisierung
    WIR BERATEN SIE GERNE VERKAUF: +43 1 5876373 - 540 TECHNIK & RECHT: +43 1 5876373 - 530 [email protected] news OVE Standardization News Monatliche Neuerscheinungen und Informationen zur elektrotechnischen Normung und Standardisierung TK IT-EG: Informationstechnik, Telekommunikation und INHALTSVERZEICHNIS Seite Elektronik Neuerscheinungen von OVE-Normen OVE EN 60062:2020-04-01 und OVE-Richtlinien 1 Kennzeichnung von Widerständen und Kondensatoren (IEC 60062:2016 + COR1:2016 + A1:2019) € 104,20 Neue OVE-Entwürfe 2 Ersatz für OVE EN 60062:2017-07-01 OVE EN 60068-2-69:2020-04-01 Neue Entwürfe von IEC und CENELEC 4 Umgebungseinflüsse – Teil 2-69: Prüfungen – Prüfung Te/Tc: Prüfung der Lötbarkeit von Bauelementen der Elek- Normungsvorhaben von IEC, CENELEC, OVE 5 tronik und Leiterplatten mit der Benetzungswaage (Kraft- Neugründungen von Gremien bei IEC, CENELEC, messung) OVE; Call for experts 8 (IEC 60068-2-69:2017 + COR1:2018 + A1:2019) € 94,80 Ersatz für OVE EN 60068-2-69:2018-02-01, Neue Publikationen von IEC, ISO/IEC, CENELEC, OVE EN 60068-2-69/AC:2018-06-01. IEEE 8 ÖVE/ÖNORM EN 302 636-4-1 V1.4.1:2020-04-01 Intelligent Transport Systems (ITS); Vehicular Communica- Amtsblatt der Europäischen Union 13 tions; GeoNetworking – Part 4: Geographical addressing and forwarding for point-to-point and point-to-multipoint com- Bundesgesetzblatt für die Republik Österreich 14 munications – Sub-part 1: Media-Independent Functionality (ETSI EN 302 636-4-1 V1.4.1 (2020-01)) € 72,80 Verschiedene Veröffentlichungen und Mitteilungen 14 Ersatz für ÖVE/ÖNORM EN 302
    [Show full text]
  • CENELEC-European Committee for Electrotechnical Standardization
    Standards Manager Web Standards List CENELEC-European Committee for Electrotechnical Standardization Id Number Title Year Organization Page 1 EN 45554 General methods for the assessment of the ability to repair, reuse and upgrade energy-related products 2020 CENELEC 2 EN 50090-5-1 Home and Building Electronic Systems (HBES) - Part 5-1: Media and media dependent layers - Power line for HBES Class 2020 CENELEC 1 3 EN 50090-5-2 Home and Building Electronic Systems (HBES) Part 5-2: Media and media dependent layers - Network based on HBES 2020 CENELEC Class 1, Twisted Pair 4 EN 50119 Railway applications - Fixed installations - Electric traction overhead contact lines 2020 CENELEC 5 EN 50131-2-4 Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave 2020 CENELEC detectors 6 EN 50131-13 Alarm systems - Intrusion and hold-up systems - Part 13: Pyrotechnic Obscuration Security Devices 2020 CENELEC 7 EN 50212 Connectors for thermoelectric sensors 2020 CENELEC 8 EN 50305 Railway applications - Railway rolling stock cables having special fire performance - Test methods 2020 CENELEC 9 EN 50306-1 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1: General 2020 CENELEC requirements 10 EN 50306-2 Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2: Single core cables 2020 CENELEC 11 EN 50306-3 Railway applications - Railway rolling stock cables having special fire performance - Thin wall
    [Show full text]
  • Rolling Plan for Ict Standardisation
    ROLLING PLAN FOR ICT STANDARDISATION 2021 ICT Standardisation European Commission DG Internal Market, Industry, Entrepreneurship and SMEs Standards for Growth INTRODUCTION The Rolling Plan for ICT Standardisation provides a unique The Rolling Plan 2021 identifies around 180 actions bridge between EU policies and standardisation activities grouped into 37 technological or application domains in the field of information and communication technolo- under four thematic areas: key enablers and security, gies (ICT). This allows for increased convergence of stand- societal challenges, innovation for the single market and ardisation makers’ efforts towards achieving EU policy sustainable growth. In the 2021 edition four new chapters goals. This document is the result of an annual dialogue were added. “COVID-19” and “Safety, transparency and involving a wide-range of interested parties as represent- due process online” under the societal challenges theme ed by the European multi-stakeholder platform on ICT and “Circular economy” and “U-space” under sustainable standardisation (MSP). The Rolling Plan focuses on actions growth. Digital technologies and data play a paramount that can support EU policies and does not claim to be as role in fighting the pandemic and are at the heart of the complete as the work programmes of the various stand- digital transformation that is needed to convert our econ- ardisation bodies. omy to a low emission, circular one. Challenges with re- spect to cybersecurity, safety, privacy, transparency and Standardisation actions identified in this document to sup- integrity of digital processes arise at every step of digital- port EU policies are complementary to other instruments, isation and policy makers need to be more aware that ICT in particular the Annual Union Work Programme (AUWP).
    [Show full text]
  • Cyberattacken Wirkungsvoll Abwehren
    8/2019 www.etz.de Cyberattacken wirkungsvoll abwehren Andreas Klien www.omicronenergy.com/stationguard Cyber Security Experte A8100 TITELSTORYStationGuard-etz-Cover-DEU.indd 1 IO-LINK SPECIAL 2019-07-18 12:55:27 Cyber Security in der Unterstation Geräte einfacher in Profinet Smart Energy integrieren JEDER SPRICHT ÜBER DAS IIOT ... wir setzen es einfach um. Netzwerke und Computer für eine „smartere“ Industrie. Leistungsstarke Computer für Ihre Bedürfnisse designt Sichere und verlässliche Netzwerke – immer und überall Vertikale Integration von SCADA bis zu Feldgeräten Moxa. Wo Innovation passiert. www.moxa.com EDITORIAL GOSSEN METRAWATT Erfolgsgeschichte weiterschreiben Anfangs wurde IO-Link als ein weiteres Bussystem verschrien, das – wenn überhaupt – im deutschen Markt eingesetzt wird. Inzwischen hat die leistungsfähige Punkt-zu-Punkt-Kommunikation unter Beweis gestellt, dass sie all dies nicht ist. Schon 2018 waren weltweit 11,4 Mio. IO-Link-Geräte installiert und wenn die Entwicklung so weitergeht – und es spricht nichts dagegen –, werden es voraussicht- lich in diesem Jahr mehr als 15 Mio. IO-Link-Geräte sein. Schließlich stößt das feldbusunabhängige Kommunikationsproto- koll weltweit auf großes Interesse. Das zeigen nicht nur die stei- genden Mitgliederzahlen (im Juni 2019 waren es 246), sondern auch die vielen Anmeldungen für die Workshops in China, Japan, Ungarn, Frankreich und Italien, die in nächster Zeit anstehen. Zudem ist die Community dabei, in mehreren Ländern eigene Gruppen zu gründen und zu etablieren. Der nächste deutsch- sprachige Workshop findet übrigens am 22. Oktober 2019 in Mannheim statt. Dabei entwickelt sich IO-Link immer weiter und erschließt sich neue Anwendungsfelder. Gute Beispiele dafür sind Wireless und Safety. „Wir sind extrem zufrieden mit der Entwicklung von IO-Link.
    [Show full text]