DOCSLIB.ORG

Structure for UNO/IMCO CODES

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

Structure for UNO/IMCO CODES ------------------------------------------------------------ Field Name Type Width ------------------------------------------------------------ IMCO CODE Alphanumeric 3 IMDG GROUP Alphanumeric 2 UNO CODE Alphanumeric 5 DESCRIPTION Alphanumeric 300 ------------------------------------------------------------ 1.4D 0012 CARTRIDGES SAFETY OTHER THAN BLANK 1.4D 0014 CARTRIDGES SAFETY BLANK 1.4D 0323 CARTRIDGES SAFETY 1.1B 0333 FIRE WORKS(1.1G) 1.2B 0334 FIRE WORKS(1.2G) 1.3B 0335 FIRE WORKS(1.3G) 1.4B 0336 FIRE WORKS(1.4G) 1.4B 0337 FIRE WORKS(1.4S) 2.1B 1001 ACETYLENE, DISSOLVED 2.2C 1002 AIR,COMPRESSED 2.2B 1003 AIR,REFRIGERATED LIQUID 2.2C 1005 AMMONIA,ANHYDROUS LIQUEFIED OR AMMONIA SOLUTION 2.2C 1006 ARGON, COMPRESSED 2.2B 1008 BORON FLUORIDE, BORON TRIFLUORIDE 2.2C 1009 BROMOTRIFLUORO METHANE, R13 B1, TRIFLUORO BROMO METHANE 2.2B 1010 BUTADIENE INHIBITED, DIVINYL,INHIBITED 2.2B 1011 BUTANE OR BUTANE MIXTURE 2.2B 1012 BUTENE,BUTYLENE 2.2C 1013 CARBON DIOXIDE,CARBONIC ANHYDRIDE 2.2C 1014 CARBON DIOXIDE AND OXYGEN MIXTURES, OXYGNE AND CARBON DIOXIDE, MIXTURES 2.2C 1015 CARBON DIOXIDE AND NITROUS OXIDE MIXTURES 2.2B 1016 CARBON MONOXIDE 2.3C 1017 CHLORINE 2.2C 1018 CHLORO DIFLUOROMETHANE, MONOCHLORO DIFLUORO METHANE, R22 2.2C 1020 CHLORO PENTA FLUORO ETHANE, MONOCHLORO PETA FLUORO ETHANE, R115 2.2C 1021 CHLOROTETRA FLUORO ETHANE, MONOCHLORO TETRAFLUORO ETHANE, R124 2.2C 1022 CHLORO TRIFLUORO METHANE, MONOCHLORO TRIFLUORO METHANE, R13, TRIFLUORO CHLORO METHANE 2.2C 1023 COAL GAS 2.2B 1026 CYANOGEN, CYANOGEN, DICYANOGEN 2.2B 1027 CYCLO PROPANE LIQUEFIED 2.2C 1028 DICHLORO DIFLUORO METHANE, R 12 2.2C 1029 DICHLORO MONO FLUORO METHANE, R21 2.2B 1030 1,1-DIFLUORO ETHANE, ETHYLENE FLUORIDE, ETHYLIDENE DIFLUORIDE, ETHYLIDENE FLUORIDE, R152A 2.2B 1032 DIMETHYLAMINE ANHYDROUS 2.2B 1033 DIMEHYL ETHER 2.2B 1035 ETHANE,COMPRESSED 2.2B 1036 AMINO ETHANE, ETHYLAMINE, MONO ETHYLAMINE 2.2B 1037 CHLORO ETHANE, ETHYL CHLORIDE 2.2B 1038 ETHYLENE REFRIGERATED LIQUID 2.2B 1039 ETHYL METHYL ETHER, METHOXY ETHANE 2.2B 1040 ETHYLENE OXIDE, OXIRANE 2.2B 1041 CARBON DIOXIDE AND ETHYLENE OXIDE MIXTURES 2.2C 1043 FERTILIZER AMMONIATING SOLUTION 2.2C 1044 FIRE EXTINGUISHERS 2.2B 1045 FLUORINE,COMPRESSED 2.2C 1046 HELIUM,COMPRESSED 2.2C 1048 HYDROGEN BROMIDE,ANHYDROUS 2.2B 1049 HYDROGEN,COMPRESSED 2.2C 1050 HYDROGEN CHLORIDE,ANHYDROUS 6.1A 1051 HYDROCYANIC ACID,ANHYDROUS,STABILIZED, HYDROGEN CYANIDE,ANHYDROUS,STABILIZED, PRUSSIC ACID,ANHYDROUS,STABILIZED 8.0B 1052 HYDROFLUORIC ACID,ANHYDROUS, HYDROGEN FLUORIDE,ANHYDROUS 2.2B 1053 HYDROGEN SULPHIDE, SULPHURETTED HYDROGEN 2.2B 1055 ISOBUTENE, ISOBUTYLENE 2.2C 1056 KRYPTON,COMPRESSED 2.2B 1057 FLAMMABLE GAS IN LIGHTERS, LIGHTERS,FOR CIGARS,CIGARETTES, ETC.WITH FLAMMABLE GAS 2.2C 1058 LIQUIFIED GASES,NON-FLAMMABLE,CHARGED WITH NITROGEN,CARBON DIOXIDE OR AIR 2.2B 1060 METHYL ACETYLENE AND PROPADIENE MIXTURE,STABILIZED 2.2B 1061 AMINOMETHANE ANHYDROUS, METHYLAMINE, ANHYDROUS, MONO METHYLAMINE,ANHYDROUS 2.2C 1062 BROMOMETHANE, METHYL BROMIDE 2.2B 1063 CHLOROMETHANE, METHYL CHLORIDE, R40 2.2B 1064 METHYL MERCAPTAN 2.2C 1065 NEON,COMPRESSED 2.2C 1066 NITROGEN,COMPRESSED 2.2B 1067 DINITROGEN TETROXIDE,LIQUEFIED, NITROGEN DIOXIDE LIQUEFIED, NITROGEN PEROXIDE,LIQUEFIED 2.2B 1069 NITROSYL CHLORIDE 2.2C 1070 DINITROGEN OXIDE,COMPRESSED, NITROUS OXIDE COMPRESSED 2.2B 1071 OIL GAS 2.2C 1072 OXYGEN,COMPRESSED 2.2C 1073 OXYGEN,REFRIGERATED LIQUID 2.2B 1075 PETROLEUM GASES,LIQUIFIED 2.2B 1076 CARBONYL CHLORIDE, PHOSGENE 2.2A 1077 PROPENE, PROPYLENE 2.2C 1079 SULPHUR DIOXIDE LIQUEFIED 2.2C 1080 SULPHUR HEXAFLUORIDE 2.2B 1081 TETRA FLUORO ETHYLENE,INHIBITED 2.2B 1082 CHLORO TRIFLUORO ETHYLENE INHIBITED, TRIFLUORO CHLORO ETHYLENE,INHIBITED, TRIFLUORO MONOCHLORO ETHYLENE,INHIBITED 2.2B 1083 TRIMETHYLAMINE,ANHYDROUS 2.2B 1085 VINYL BROMIDE,INHIBITED 2.2B 1086 VINYL CHLORIDE,INHIBITED 2.2B 1087 VINYL METHYL ETHER, INHIBITED 3.1A 1088 ACETAL, ACETALDEHYDE DIETHYL ACETAL, ETHYLIDENE DIETHYL ETHER 3.1A 1089 ACETALDEHYDE, ACETIC ALDEHYDE, ALDEHYDE, ETHANAL, ETHYL ALDEHYDE 3.1A 1090 ACETONE, DIMETHYL KETONE, KETONE PROPANE, KETOPROPANE, 2-PROPANONE, PYROACETIC ETHER 3.2A 1091 ACETONE OILS 3.1A 1092 ACRALDEHYDE,INHIBITED,ACROLEIN,INHBT.,ACRYLALDEHYDE,INHBT.,ACRYLICALDEHYDE,INHBT ,ALLYLALDEHYDE,INHIBITED, PROPENAL, INHIBITED 3.2A 1093 ACRYLONITRILE,INHIBITED, PROPENE NITRILE,INHIBITED, VINYL CYANIDE,INHIBITED 3.2A 1098 (A.B) ALLYL ALCOHOL, 2-PROPEN-1-OL, PROPENYL ALCOHOL 3.3B 1098 (B.C) ALLYL ALCOHOL, 2-PROPEN-1-OL, PROPENYL ALCOHOL 3.2A 1099 ALLYL BROMIDE, BROMOALLYLENE, 3-BROMOPROPENE 3.1A 1100 AC, ALLYL CHLORIDE,3-CHLOROPROPENE,ALPHA CHLOROPROPYLENE, CHLORO ALLYLENE 3.2A 1104 (A,B) AMYL ACETATES, ISOAMYL ACETATE, PEAR OIL 3.3B 1104 (B,C) AMYL ACETATES, ISOAMYL ACETATE, PEAR OIL 3.2A 1105 (A,B) AMYL ALCOHOLS, PENTANOLS 3.3B 1105 (B,C) AMYL ALCOHOLS, DIETHYL CARBINOL, ISOAMYL ALCOHOL, PENTANOLS 3.2A 1106 1-AMINO PENTANE, AMYL AMINE, ISOPENTYLAMINE, PENTYLAMINE 3.2A 1107 AMYL CHLORIDES,1-CHLORO-3-METHYL BUTANE,2-CHLORO-2-METHYL BUTANE,1- CHLOROPENTANE 3.1A 1108 NORMAL AMYLENE, 1-PENTENE, PROPYLETHYLENE 3.3B 1109 (B,C) AMYL FORMATES, ISOAMYL FORMATE 3.3C 1110 AMYL METHYL KETONE, 2-HEPTANONE, METHYLAMYL KETONE 3.2B 1111 AMYL HYDROSULPHIDE, AMYL MERCAPTAN, AMYL SULPHYDRATE, PEPNTANETHIOL 3.3C 1112 AMYL NITRATE 3.1A 1113 AMYL NITRITE, ISOAMYL,NITRATE 3.2A 1114 BENZENE, BENZOL, PHENE, PHYNYL HYDRIDE 3.1A 1115 BENZINE 3.2A 1115 BENZINE 3.3B 1115 BENZINE 3.2A 1118 BRAKE FLUID,HYDRAULIC 3.3B 1118 BRAKE FLUID,HYDRAULIC 3.2A 1120 (A,B) BUTANOLS, BUTAN-2-OL, SECONDARY BUTANOL, TERTIARY BUTANOL, SECONDARY BUTYL ALCOHOL, 2-METHYL-2-PROPANOL, TRIMETHYL CARBINOL 3.3B 1120 BUTANOLS, 1-BUTANOL, BUTAN-2-OL, NORMAL BUTANOL, SECONDARY BUTANOL, NORMAL BUTYL ALCOHOL 3.2A 1123 BUTYL ACETATES 3.3B 1123 BUTYL ACETATES 3.2A 1125 1-AMINO BUTANE, NORMAL BUTYLAMINE 3.2A 1126 1-BROMO BUTANE,NORMAL BUTYL BROMIDE 3.3B 1126 1-BROMO BUTANE, BUTYL BENZINES 3.1A 1127 TERTIARY BUTYL CHLORIDE,2-CHLORO-2-METHYLPROPANE, CHLORO BUTANES 3.2A 1127 (AB) NORMAL BUTYL CHLORIDE,SECONDARY BUTYL CHLORIDE,CHLORO METHYL PROPANES,1-CHLORO-2-METHYLPROPA, CHLORO BUTANES, 1-CHLOROBUTANE, 2-CHLOROBUTANE 3.2B 1128 NORMAL BUTYL FORMATE 3.2A 1129 BUTAL DEHYDE, NORMAL BUTANAL,NORMAL BUTYL ALDEHYDE,BUTYRAL DEHYDE,BUTYRIC ALDEHYDE 3.3C 1130 CAMPHOR OIL 3.1A 1131 CARBON BISULPHIDE,CARBON DISULPHIDE,CARBON SULPHIDE 3.2A 1132 CARBON REMOVER LIQUID 3.1A 1133 ADHESIVES,CONTAINING AN INFLAMMABLE LIQUID,CEMENT LIQUID 3.2A 1133 ADHESIVES,CONTAINING AN INFLAMMABLE LIQUID,CEMENT LIQUID 3.3B 1133 ADHESIVES,CONTAINING AN INFLAMMABLE LIQUID,CEMENT LIQUID 3.3C 1134 CHLORO BENZENE, MONOCHLORO BENZENE, MONOCHLORO BENZOL, PHENYL CHLORIDE 6.1C 1135 2-CHLORO ETHANOL,2-CHLORO ETHYL ALCOHOL, ETHYLENE CHLOROHYDRIN, GLYCOL CHLOROHYDRIN 3.2A 1136 (A,B) COALTAR DISTILLATE, COALTAR OIL 3.3B 1136 (B,C) COALTAR DISTILLATE, COALTAR OIL 3.2A 1139 COATING SOLUTION 3.3B 1139 COATING SOLUTION 3.2A 1142 (A,B) ANTIFREEZE, CLEANING COMPOUND, DE-ICING FLUID, DRESSING LEATHER, FLAMMABLE LIQUID PREPARATIONS, N.O.S., POLOSHING FLUID, REDUCING LIQUID, REMOVING LIQUID, THINNING LIQUID, VULCANIZING FLUID 3.3B 1142 (B,C) ANTIFREEZE, CLEANING COMPOUND, DE-ICING FLUID, DRESSING LEATHER, FLAMMABLE LIQUID PREPARATIONS,N.O.S., POLISHING FLUID, REDUCING LIQUID, REMOVING LIQUID, THINNING LIQUID, VULCANIZING FLUID 3.2B 1143 2-BUTENAL INHINITED, CROTONOLDEHYDE INHIBITED, CROTONIC ALDEHYDE INHIBITED, CROTONALDEHYDE INHIBITED, CROTONIC ALDEHYDE INHIBITED, BETA-METHYL ACROLEIN INHIBITED, PROPYLENE ALDEHYDE,INHIBITED 3.1A 1144 2-BUTINE,2,BUTYNE, CROTONYLENE, CROTONYLENE, DIMETHYL ACETYLENE 3.1A 1145 CYCLOHEXANE, HEXA HYDRO BENZENE, HEXA METHYLENE, HEXA NAPHTHENE 3.1A 1146 CYCLO PENTANE, PENTA METHYLENE 3.3C 1147 DECAHYDRO NAPHTHALENE, DECALIN 3.2A 1148 (A,B) DIACETONE, DIACETONE ALCOHOL, 4-HYDROXY-2-KETO-4-METHYLPENTANE, 4-HYDROXY-4-METHYL PENTA-NONE-2 3.3B 1148 (B,C) DIACETONE, DIACETONE ALCOHOL, 4-HYDROXY-2-KETO-4-METHYLPENTANE, 4-HYDROXY-4-METHYL PENTA-NONE-2 3.3B 1149 (B,C) 1-BUTOXY BUTANE,BUTYL ETHERS, DIBUTYL ETHERS, NORMAL-DIBUTYL ETHER 3.2A 1150 ACETYLENE DICHLORIDE, DICHLORO ETHYLENE 3.3C 1152 DICHLORO PENTANES 3.3C 1153 1,2 DIETHOXY ETHANE, ETHYLENE GLYCOL DIETHYL ETHER 3.1A 1154 DIETHYLAMINE 3.1A 1155 ANAESTHETIC ETHER, DIETHYL ETHER, DIETHYL OXIDE, ETHER, ETHYL ETHER,ETHYL OXIDE, SULPHURIC ETHER 3.2B 1156 DIETHYL KETONE, ETHYL PROPIONYL, METACETONE, 3-PENTANONE, PROPIONE 3.3C 1157 DIISOBUTYL KETONE, 2,6-DIMETHYL-4-HEPTANONE, ISOVALERONE 3.2A 1158 DIISOPROPYLAMINE 3.1A 1159 DIISOPORPYL ETHER, ISOPROPYL ETHER, 2-ISOPROPYL ETHER 3.1A 1160 DIMETHYLAMINE SOLUTION 3.2A 1160 DIMRTHYLAMINE SOLUTION 3.2B 1161 DIMETHYL CARBONATE, METHYL CARBONATE 3.2A 1162 DIMETHYL DICHLOROSILANE 3.2A 1163 DIMETHYL HYDRAZINE, UNSYMMETRICAL, 1,1-DIMETHYL HYDRAZINE, UNS- DIMETHYL HYDRAZINE, UDMH 3.1A 1164 DIMETHYL SULPHIDE, METHANE THIOMETHANE, METHYL SULPHIDE 3.2B 1165 1,4-DIETHYLENE DIOXIDE, DIETHYLENE ETHER, DIETHYLENE OXIDE, DIOXANE, DIOXYETHYLENE ETHER 3.2A 1166 DIOXOLANE 3.1A 1167 DIVINYL ETHER,INHIBITED, DIVINYL OXIDE, INHIBITED, VINYL ETHER,INHIBITED 3.2A 1168 DRIERS,PAINT OR VARNISH,LIQUID N.O.S. 3.3B 1168 DRIERS,PAINT OR VARNISH,LIQUID 3.2A 1169 (A,B) EXTRACTS,AROMATIC,LIQUID, ESSENCES 3.3B 1169 (B,C) EXTRACTS,AROMATIC,LIQUID, ESSENCES 3.2A 1170 (A,B) ALCOHOL, ALCOHOL DENATURED, ALCOHOL INDUSTRIAL, ETHANOL OR ETHANOL SOLUTIONS, ETHYL ALCOHOL, METHYLATED SPIRIT 3.3B 1170 (B,C) ALCOHOL, ALCOHOL DENATURED, ALCOHOL INDUSTRIAL, ETHANOL OR ETHANOL SOLUTIONS, ETHYL ALCOHOL 3.3C 1171 2,ETHOXY ETHANOL, ETHYLENE GLYCOL MONO-ETHYL ETHER,
Recommended publications
  • United States Patent 19 11 Patent Number: 5,418,243 Angerbauer Et Al

    United States Patent 19 11 Patent Number: 5,418,243 Angerbauer Et Al

    USOO5418243A United States Patent 19 11 Patent Number: 5,418,243 Angerbauer et al. 45 Date of Patent: May 23, 1995 54 SUBSTITUTED 4-PHENYL-PYRIDONES 4,215,126 7/1980. Durant et al........................ 514/345 AND 4-PHENYL-3-ALKOXYPYRIDNES 4,684,477 8/1987 Sugimori et al. ... 546/290 4,916,239 4/1990 Treiber ................. ... 549/292 75 Inventors: Rolf Angerbauer; Peter Fey; Walter 4,988,711 1/1991 Angerbauer et al. ... 514/326 Hibsch, all of Wuppertal; Thomas 5,032,602 7/1991 Fey et al. ................. ... 54/345 Philipps, Cologne; Hilmar Bischoff, 5,064,841 11/1991 Angerbauer et al. ... 514/336 Wuppertal; Hans-Peter Krause, 5,138,090 8/1992 Fey et al. .............................. 560/59 Schwelm; Jörg Peterson-von Gehr, Bochum; Delf Schmidt, Wuppertal, FOREIGN PATENT DOCUMENTS all of Germany 0373423 6/1990 European Pat. Off. 73 Assignee: Bayer Aktiengesellschaft, OTHER PUBLICATIONS Leverkusen, Germany J. Med. Chem., 1990, vol. 33, pp. 52-60; “Synthesis and 21) Appl. No.: 166,775 Biological Activity of New HGM-CoA Reductase 22 Filed: Dec. 14, 1993 Inhibitors ... ', G. Beck. Primary Examiner-C. Warren Ivy (30) Foreign Application Priority Data Assistant Examiner-A. A. Owens Dec. 21, 1992 DE Germany ........................ 4243 278.2 Attorney, Agent, or Firm-Sprung, Horn, Kramer & Jun. 28, 1993 DE Germany ........................ 43 21421.5 Woods 511 Int. Cl...................... A61K 31/44; C07D 213/64 57 ABSTRACT 52 U.S. C. ...................................... 514/345; 546/24; 546/290; 514/89 Substituted 4-phenyl-pyridones and 4-phenyl-2-alkox 58 Field of Search .................. 546/290, 24; 514/345, ypyridines are prepared by reducing corresponding 514/89 4-phenyl-pyridone and 4-phenyl-2-alkoxypyridine de rivatives.
  • Chapter 3.3 Special Provisions Applicable to Certain Articles Or Substances

    Chapter 3.3 Special Provisions Applicable to Certain Articles Or Substances

    Chapter 3.3 Special provisions applicable to certain articles or substances 3.3.1 When Column (6) of Table A of Chapter 3.2 indicates that a special provision is relevant to a substance or article, the meaning and requirements of that special provision are as set forth below. 16 Samples of new or existing explosive substances or articles may be carried as directed by the competent authorities (see 2.2.1.1.3) for purposes including: testing, classification, research and development, qual- ity control, or as a commercial sample. Explosive samples which are not wetted or desensitized shall be limited to 10 kg in small packages as specified by the competent authorities. Explosive samples which are wetted or desensitized shall be limited to 25 kg. 23 Even though this substance has a flammability hazard, it only exhibits such hazard under extreme fire conditions in confined areas. 32 This substance is not subject to the requirements of RID when in any other form. 37 This substance is not subject to the requirements of RID when coated. 38 This substance is not subject to the requirements of RID when it contains not more than 0.1% calcium carbide. 39 This substance is not subject to the requirements of RID when it contains less than 30% or not less than 90% silicon. 43 When offered for carriage as pesticides, these substances shall be carried under the relevant pesticide entry and in accordance with the relevant pesticide provisions (see 2.2.61.1.10 to 2.2.61.1.11.2). 45 Antimony sulphides and oxides which contain not more than 0.5% of arsenic calculated on the total mass are not subject to the requirements of RID.
  • 5. POTENTIAL for HUMAN EXPOSURE 5.1 OVERVIEW White

    5. POTENTIAL for HUMAN EXPOSURE 5.1 OVERVIEW White

    WHITE PHOSPHORUS 157 5. POTENTIAL FOR HUMAN EXPOSURE 5.1 OVERVIEW White phosphorus can enter the environment from its production, use, accidental spills during loading and unloading for shipment, and accidental spills during transport. Hazardous wastes sites containing white phosphorus can also be a source of phosphorus in the environment. White phosphorus has been found in at least 77 of the 1,430 current or former EPA National Priorities List (NPL) hazardous waste sites (HazDat 1996). However, the number of sites evaluated for white phosphorus is not known. The frequency of these sites within the United States can be seen in Figure 5-l. The persistence of elemental phosphorus in the air is very short due to oxidation to phosphorus oxides and ultimately to phosphorus acids. However, the particulate phosphorus aerosol may be coated with a protective oxide layer that may prevent further oxidation and extend the lifetime of particulate phosphorus in air. Both wet and dry deposition remove unreacted elemental phosphorus and the degradation products from the air. Similarly, elemental phosphorus oxidizes and hydrolyzes in water and in soil. A small amount of elemental phosphorus is lost from soil and water by volatilization. Phosphorus is used as a fumigant in the storage of grain. Because of ease of application, pellets of aluminum or magnesium phosphide are commonly used (Garry et al. 1993). Phosphine, a highly toxic gas, is generated from phosphide. The rate of formation of phosphine (permissible exposure limit [PEL], 0.4 mg/m3) is dependent on the ambient temperature and humidity. Its release is rapid, and it is extremely fatal to the unprotected person (Garry et al.
  • Sodium Hydroxide, Solution (Material Safety Data Sheet)

    Sodium Hydroxide, Solution (Material Safety Data Sheet)

    3/7/2018 Report | CAMEO Chemicals | NOAA Print Chemical Datasheet SODIUM HYDROXIDE SOLUTION Chemical Identifiers CAS Number UN/NA Number DOT Hazard Label USCG CHRIS Code 1310-73-2 1824 Corrosive CSS NFPA 704 Diamond Hazard Value Description 0 Health 3 Can cause serious or permanent injury. 3 1 Flammability 0 Will not burn under typical fire conditions. Normally stable but can become unstable at elevated temperatures and Instability 1 pressures. Special (NFPA, 2010) NIOSH Pocket Guide International Chem Safety Card Sodium hydroxide SODIUM HYDROXIDE General Description A colorless liquid. More dense than water. Contact may severely irritate skin, eyes, and mucous membranes. Toxic by ingestion. Corrosive to metals and tissue. Hazards Reactivity Alerts none Air & Water Reactions Slowly absorbs carbon dioxide from the air to give solid products as crusts or precipitates. Water soluble. Dilution with water liberates heat, possibly enough to cause local boiling and spattering. Fire Hazard Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]: https://cameochemicals.noaa.gov/report?key=CH1499 1/5 3/7/2018 Report | CAMEO Chemicals | NOAA Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Some are oxidizers and may ignite combustibles (wood, paper, oil, clothing, etc.). Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. For electric vehicles or equipment, ERG Guide 147 (lithium ion batteries) or ERG Guide 138 (sodium batteries) should also be consulted. (ERG, 2016) Health Hazard Causes severe burns of eyes, skin, and mucous membranes. (USCG, 1999) Reactivity Profile SODIUM HYDROXIDE SOLUTION refers to an aqueous solution of sodium hydroxide.
  • Alphabetical Index of Substances and Articles

    Alphabetical Index of Substances and Articles

    ALPHABETICAL INDEX OF SUBSTANCES AND ARTICLES - 355 - NOTES TO THE INDEX 1. This index is an alphabetical list of the substances and articles which are listed in numerical order in the Dangerous Goods List in Chapter 3.2. 2. For the purpose of determining the alphabetical order the following information has been ignored even when it forms part of the proper shipping name: numbers; Greek letters; the abbreviations “sec” and “tert”; and the letters “N” (nitrogen), “n” (normal), “o” (ortho) “m” (meta), “p” (para) and “N.O.S.” (not otherwise specified). 3. The name of a substance or article in block capital letters indicates a proper shipping name. 4. The name of a substance or article in block capital letters followed by the word “see” indicates an alternative proper shipping name or part of a proper shipping name (except for PCBs). 5. An entry in lower case letters followed by the word “see” indicates that the entry is not a proper shipping name; it is a synonym. 6. Where an entry is partly in block capital letters and partly in lower case letters, the latter part is considered not to be part of the proper shipping name. 7. A proper shipping name may be used in the singular or plural, as appropriate, for the purposes of documentation and package marking. - 356 - INDEX Name and description Class UN No. Name and description Class UN No. Accumulators, electric, see 4.3 3292 Acid mixture, nitrating acid, see 8 1796 8 2794 8 2795 Acid mixture, spent, nitrating acid, see 8 1826 8 2800 8 3028 Acraldehyde, inhibited, see 6.1 1092 ACETAL 3 1088
  • United States Patent Office Patented Jan

    United States Patent Office Patented Jan

    3,119,666 United States Patent Office Patented Jan. 28, 1964 1. 2 solvent is immaterial, since in practical operation, I re 3,119,666 use the solvent for the reaction after the suspended phos METHOS FOR THE PREPARATION OF phorus pentabromide is removed therefrom by filtration PHOSPHORUS PENTABROMIDE or by centrifuging after the reaction is completed. There Richard C. Nametz, St. Louis, Mich., assignor to fore, upon the first use of the solvent it becomes satu Michigan Chemical Corporation, St. Louis, Mich., a rated with the small amount of phosphorus pentabromide corporation of Michigan which it will dissolve, and will dissolve no more of the No Drawing. Fied Nov. 12, 1957, Ser. No. 695,548 product upon reuse. 12 Claims. (C. 23-205) In this method, I utilize substantially equimolar quan This invention relates to an improved method for the O tities of bromide and of phosphorus tribromide, together production of phosphorus pentabromide. with an amount of the co-solvent for bromine and phos Phosphorus pentabromide (phosphoric bromide) is a phorus tribromide relative to the quantities of the re known compound having a melting point above 100 C., actants used which is within the range which will suspend at which temperature it decomposes to form phosphorus the phosphorus pentabromide as a slurry which can be tribromide with the evolution of bromine. Due to its 5 readily stirred and which at the end of the reaction can heat sensitivity, phosphorus pentabromide cannot be puri be readily filtered, but which does not provide an un wieldly bulk of material to handle.
  • WO 2016/074683 Al 19 May 2016 (19.05.2016) W P O P C T

    WO 2016/074683 Al 19 May 2016 (19.05.2016) W P O P C T

    (12) INTERNATIONAL APPLICATION PUBLISHED UNDER THE PATENT COOPERATION TREATY (PCT) (19) World Intellectual Property Organization International Bureau (10) International Publication Number (43) International Publication Date WO 2016/074683 Al 19 May 2016 (19.05.2016) W P O P C T (51) International Patent Classification: (81) Designated States (unless otherwise indicated, for every C12N 15/10 (2006.01) kind of national protection available): AE, AG, AL, AM, AO, AT, AU, AZ, BA, BB, BG, BH, BN, BR, BW, BY, (21) International Application Number: BZ, CA, CH, CL, CN, CO, CR, CU, CZ, DE, DK, DM, PCT/DK20 15/050343 DO, DZ, EC, EE, EG, ES, FI, GB, GD, GE, GH, GM, GT, (22) International Filing Date: HN, HR, HU, ID, IL, IN, IR, IS, JP, KE, KG, KN, KP, KR, 11 November 2015 ( 11. 1 1.2015) KZ, LA, LC, LK, LR, LS, LU, LY, MA, MD, ME, MG, MK, MN, MW, MX, MY, MZ, NA, NG, NI, NO, NZ, OM, (25) Filing Language: English PA, PE, PG, PH, PL, PT, QA, RO, RS, RU, RW, SA, SC, (26) Publication Language: English SD, SE, SG, SK, SL, SM, ST, SV, SY, TH, TJ, TM, TN, TR, TT, TZ, UA, UG, US, UZ, VC, VN, ZA, ZM, ZW. (30) Priority Data: PA 2014 00655 11 November 2014 ( 11. 1 1.2014) DK (84) Designated States (unless otherwise indicated, for every 62/077,933 11 November 2014 ( 11. 11.2014) US kind of regional protection available): ARIPO (BW, GH, 62/202,3 18 7 August 2015 (07.08.2015) US GM, KE, LR, LS, MW, MZ, NA, RW, SD, SL, ST, SZ, TZ, UG, ZM, ZW), Eurasian (AM, AZ, BY, KG, KZ, RU, (71) Applicant: LUNDORF PEDERSEN MATERIALS APS TJ, TM), European (AL, AT, BE, BG, CH, CY, CZ, DE, [DK/DK]; Nordvej 16 B, Himmelev, DK-4000 Roskilde DK, EE, ES, FI, FR, GB, GR, HR, HU, IE, IS, IT, LT, LU, (DK).
  • The Replaceonetit of Hydi*Oxyl by Bromine

    The Replaceonetit of Hydi*Oxyl by Bromine

    View Article Online / Journal Homepage / Table of Contents for this issue THE REPLACEMENT OF HYDROXYL BY BROMINE. 855 LXXXVIII:.- The ReplaceoneTit of Hydi*oxyl by Bromine. By WILLIAM HENRYPERKIN, jun., and JOHNLIONEL SIREONSEN. Published on 01 January 1905. Downloaded by University of Windsor 26/10/2014 01:06:14. THEmethods available for the preparation of aliphatic compounds in which several atoms of bromine are combined with different carbon atoms are few in number. It is usually assumed that a substance containing one or more hydroxyl groups may be converted into the corresponding bromo-derivatives by treatment with hydrobromic acid, or phosphorus tri- or penta-bromide, but in attempting to use this method in the preparation of bromo-derivatives for the purpose of ring synthesis unexpected difficulties were encountered. The hydroxy -groups in such polyhydric alcohols as glycerol, erythritol, mannitol, ckc., are usually only partially replaced by bromine when these alcohols are treated with hydrobroinic acid, and if, by employing higher temperatures and a large excess of the halogen acid, the attempt is made to complete the substitution, decomposition usually takes place with much charring, and the yield obtained is con- sequently very small. The same remarks apply to the use of the View Article Online 856 PERKIN AND SIMONSEN : bromides of phosphorus in such cases, the results obtained by the action of these reagents on the polyhydric alcohols being frequently most unsatisfactory." In investigating this matter, we found that a great improvement is achieved if the alcohol is first converted into the acetate and the latter is then heated with a solution of hydrogen bromide in glacial acetic acid (saturated at 0") at about 150'.
  • Addressing Highly Hazardous Pesticides in Mozambique

    Addressing Highly Hazardous Pesticides in Mozambique

    República de Moçambique Ministério da Agricultura e Segurança Alimentar Direcção Nacional de Agricultura e Silvicultura Addressing Highly Hazardous Pesticides in Mozambique Addressing Highly Hazardous Pesticides in Mozambique Food and Agriculture Organization of the United Nations Rome, 2016 The designations employed and the presentation of material in this information product do not imply the expression of any opinion whatsoever on the part of the Food and Agriculture Organization of the United Nations (FAO) concerning the legal or development status of any country, territory, city or area or of its authorities, or concerning the delimitation of its frontiers or boundaries. The mention of specific companies or products of manufacturers, whether or not these have been patented, does not imply that these have been endorsed or recommended by FAO in preference to others of a similar nature that are not mentioned. The views expressed in this information product are those of the author(s) and do not necessarily reflect the views or policies of FAO. ISBN 978-92-5-108519-6 © FAO, 2016 FAO encourages the use, reproduction and dissemination of material in this information product. Except where otherwise indicated, material may be copied, downloaded and printed for private study, research and teaching purposes, or for use in non-commercial products or services, provided that appropriate acknowledgement of FAO as the source and copyright holder is given and that FAO’s endorsement of users’ views, products or services is not implied in any way. All requests for translation and adaptation rights, and for resale and other commercial use rights should be made via www.fao.org/contact-us/licence-request or addressed to [email protected].
  • Table of Contents

    Table of Contents

    UNIVERSITY OF MISSOURI-KANSAS CITY CHEMICAL MANAGEMENT PLAN Revised May 2016 UMKC CHEMICAL MANAGEMENT PLAN This document constitutes the Chemical Management Plan (CMP) for the University of Missouri-Kansas City (UMKC). It was developed by the Environmental Health and Safety Department (EHS), to ensure the safe and proper use of hazardous and non- hazardous chemicals and to comply with applicable governmental regulations addressing the disposal of these chemicals. In addition, it was developed to foster waste minimization, and to provide the faculty and the staff with a management program to reduce the potential for accidents involving hazardous chemicals and/or wastes. Elements of the CMP include: a. a procedure for identifying potential or actual hazardous chemicals or wastes b. a procedure for periodic reexamination of those hazardous chemicals or wastes identified by the procedure in (a.) above as well as a systematic method for identification and evaluation of any new potential or actual hazardous chemicals or wastes c. procedures for labeling, and inventorying hazardous chemicals or wastes d. a procedure for identification and training of personnel directly responsible for ensuring that (a.), (b.), and (c.) are implemented e. a procedure for monitoring, recording, and reporting compliance with the CMP f. a procedure by which information generated by the CMP is provided to the persons performing waste analyses Each element is addressed as part of the complete CMP in the following paragraphs. 4 Table of Contents 1 Definitions 7 2 Identification
  • A Sheffield Hallam University Thesis

    A Sheffield Hallam University Thesis

    Hydroboration of some organometallic systems. TOWERS, Christopher John. Available from the Sheffield Hallam University Research Archive (SHURA) at: http://shura.shu.ac.uk/20447/ A Sheffield Hallam University thesis This thesis is protected by copyright which belongs to the author. The content must not be changed in any way or sold commercially in any format or medium without the formal permission of the author. When referring to this work, full bibliographic details including the author, title, awarding institution and date of the thesis must be given. Please visit http://shura.shu.ac.uk/20447/ and http://shura.shu.ac.uk/information.html for further details about copyright and re-use permissions. Z S 2 S Z 0 8 0 Sheffield City Polytechnic Library REFERENCE ONLY R6297 ProQuest Number: 10701093 All rights reserved INFORMATION TO ALL USERS The quality of this reproduction is dependent upon the quality of the copy submitted. In the unlikely event that the author did not send a com plete manuscript and there are missing pages, these will be noted. Also, if material had to be removed, a note will indicate the deletion. uest ProQuest 10701093 Published by ProQuest LLC(2017). Copyright of the Dissertation is held by the Author. All rights reserved. This work is protected against unauthorized copying under Title 17, United States C ode Microform Edition © ProQuest LLC. ProQuest LLC. 789 East Eisenhower Parkway P.O. Box 1346 Ann Arbor, Ml 48106- 1346 HYDROBORATION OF SOME ORGANOMETALLIC SYSTEMS CHRISTOPHER JOHN TOWERS A thesis submitted to the Council for National Academic Awards in partial fulfilment of the requirement for Ph.D.
  • Recommended Classification of Pesticides by Hazard and Guidelines to Classification 2019 Theinternational Programme on Chemical Safety (IPCS) Was Established in 1980

    Recommended Classification of Pesticides by Hazard and Guidelines to Classification 2019 Theinternational Programme on Chemical Safety (IPCS) Was Established in 1980

    The WHO Recommended Classi cation of Pesticides by Hazard and Guidelines to Classi cation 2019 cation Hazard of Pesticides by and Guidelines to Classi The WHO Recommended Classi The WHO Recommended Classi cation of Pesticides by Hazard and Guidelines to Classi cation 2019 The WHO Recommended Classification of Pesticides by Hazard and Guidelines to Classification 2019 TheInternational Programme on Chemical Safety (IPCS) was established in 1980. The overall objectives of the IPCS are to establish the scientific basis for assessment of the risk to human health and the environment from exposure to chemicals, through international peer review processes, as a prerequisite for the promotion of chemical safety, and to provide technical assistance in strengthening national capacities for the sound management of chemicals. This publication was developed in the IOMC context. The contents do not necessarily reflect the views or stated policies of individual IOMC Participating Organizations. The Inter-Organization Programme for the Sound Management of Chemicals (IOMC) was established in 1995 following recommendations made by the 1992 UN Conference on Environment and Development to strengthen cooperation and increase international coordination in the field of chemical safety. The Participating Organizations are: FAO, ILO, UNDP, UNEP, UNIDO, UNITAR, WHO, World Bank and OECD. The purpose of the IOMC is to promote coordination of the policies and activities pursued by the Participating Organizations, jointly or separately, to achieve the sound management of chemicals in relation to human health and the environment. WHO recommended classification of pesticides by hazard and guidelines to classification, 2019 edition ISBN 978-92-4-000566-2 (electronic version) ISBN 978-92-4-000567-9 (print version) ISSN 1684-1042 © World Health Organization 2020 Some rights reserved.