Industry Acronyms

Total Page:16

File Type:pdf, Size:1020Kb

Industry Acronyms INDUSTRY ACRONYMS AAS — Methacrylate-acrylic-styrene JIT — Just-in-time (delivery) PTFE — Polytetrafluoroethylene ABS — Acrylonitrile-butadiene-styrene LCD — Liquid crystal display PTMT — Polytetramethylene terephthalate AN — Acrylonitrile LCP — Liquid crystal polymer PUR — Polyurethane AO — Antioxidant L/D — Length:diameter ratio PVAC — Polyvinyl acetate APP — Atactic polypropylene LDPE — Low-density polyethylene PVAL — Polyvinyl alcohol AS — Antistatic LIM — Liquid injection molding PVC — Polyvinyl chloride ASA — Acrylonitrile-styrene-acrylate LLDPE — Linear low-density polyethylene PVCA — Polyvinyl chloride acetate ASTM — American Society for Testing & Materials LSM — Liquid silicone molding PVCC — Chlorinated polyvinyl chloride BMC — Bulk molding compound MAP — Modified atmosphere packaging PVDC — Polyvinylidene chloride BOPP — Biaxially oriented polypropylene MPC — Microprocessor-controlled PVDF — Polyvinylidene fluoride CAD — Computer-aided design MSDS — Material Safety Data Sheet PVF — Polyvinyl fluoride CAM — Computer-assisted manufacturing MDPE — Medium-density polyethylene QC — Quality control CAMM — Canadian Association of Mouldmakers MI — Melt index RAPRA — Rubber and Plastics Association (U.K.) CAP — Controlled atmosphere packaging mLLDPE — Metallocene linear low-density R&D — Research and development CFC — Chlorofluorocarbon polyethylene RFI — Radio frequency interference CIM — Computer-integrated manufacturing MMW — Medium molecular weight RFID — Radio frequency identification CM — Compression molding MRP — Materials requirement planning (software) RH — Relative humidity CNC — Computer numerically controlled MRPII — Manufacturing resource planning (software) RIC — Runnerless injection compression CPET — Crystallized polyethylene terephthalate NBR — Nitrile rubber (trademarked acronym) CPIA — Canadian Plastics Industry Association NR — Natural rubber RIM — Reaction injection molding CPSC — Consumer Products Safety Commission OEM — Original equipment manufacturer RRIM — Reinforced reaction injection molding CPVC — Chlorinated polyvinyl fluoride OPP — Oriented polypropylene RTM — Resin transfer molding CSB — Canadian Standards Board OPS — Oriented polystyrene SAE — Society of automotive engineers DAP — Diallyl phthalate PA — Polyamide (nylon) SAN — Styrene acrylonitrile DNC — Direct numerical control PAC — Packaging Association of Canada SB — Styrene butadiene EAA — Ethylene acrylic acid PB — Polybutylene SDS — Safety Data Sheet EC — Ethyl cellulose PBS — Polybutadiene-styrene SI — Silicone plastics EMI — Electro-magnetic interference PBT — Polybutylene terephthalate Si — Silicone rubber EP — Epoxy PC — Polycarbonate OR Process control OR SMA — Styrene maleic anhydride EPS — Expanded polystyrene Personal computer SMC — Sheet molding compound EPDM — Ethylene-propylene-diene PE — Polyethylene SPC — Statistical process control ERP — Enterprise resource planning (software) PEC — Phenylene ether copolymer SPE — Society of Plastics Engineers ESD — Electrostatic dissipative or Electrostatic PEI — Polyetherimide SPI — Society of the Plastics Industry discharge PEK — Polyetherketone SRIM — Structural reaction injection molding ETFE — Ethylene tetrafluoroethylene PEEK — Polyetheretherketone TMC — Thick molding compound EVA — Ethylene vinyl acetate PES — Polyether sulphone TPE — Thermoplastic elastomer EVOH — Ethylene vinyl alcohol PET — Polyethylene terephthalate TPO — Thermoplastic olefins FDA — Food & Drug Administration (U.S.) PET-G — Polyethylene terephthalate glycol TPU — Thermoplastic polyurethane FEP — Fluorinated ethylene-propylene copolymer PFEP — Polytetrafluoroethlyene TPX — Polymethylpentene FRE — Fibre-reinforced epoxy perfluoropolypropylene UF — Urea formaldehyde FRP — Fibre-reinforced plastic PH — Phenolic UHMW — Ultra-high molecular weight GHS — Globally Harmonized System PHA — Polyhydroxyalkanoate UL — Underwriters Laboratories GMT — Glass mat reinforced plastics PLA — Polylactic acid UP — Unsaturated polyester GT — Glass transition temperature PI — Polyisocyanurate OR Polyimide UV — Ultraviolet GTP — Group transfer polymerization POM — Polyoxymethylene OR Polyacetal VA — Vinyl acetate HAO — Higher alpha olefin PP — Polypropylene VCE — Vinyl chloride ethylene HALS — Hindered amine light stabilizers PPC — Chlorinated polypropylene VCEVA — Vinyl chloride-ethylene-vinyl acetate HDPE — High-density polyethylene PPE — Polyphenylene ether VCM — Vinyl chloride monomer HIPS — High-impact polystyrene PPO — Polyphenylene oxide VCVAC — Vinyl chloride vinyl acetate HLMI — High load melt index PPOX — Polypropylene oxide VHMW — Very high molecular weight HMW — High molecular weight PPS — Polyphenylene sulphone VLDPE — Very low-density polyethylene IMR — Internal mold release PS — Polystyrene WPC — Wood-plastics composite IP — Intellectual property OR Internet protocol PSB — Styrene butadiene rubber WHMIS — Workplace Hazardous Materials IR — Infrared PSU — Polysulphone Information System PLASTIC PROCESS EQUIPMENT, INC. www.ppe.com e-mail: [email protected] E 8303 CORPORATE PARK DRIVE W 6385 MONTESSOURI STREET A MACEDONIA, OHIO 44056 E LAS VEGAS, NEVADA 89113 Toll Free: USA, Canada & Mexico S 216-367-7000 • FAX: 216-367-7022 S 702-433-6385 • FAX: 702-433-6388 800-362-0706 T TOLL FREE: 800-321-0562 T TOLL FREE: 800-258-8877 Order Fax: 800-223-8305 Printed with permission from Canadian Plastics magazine. 1353.
Recommended publications
  • Vinyl Chloride
    Withdrawn Provided for Historical Reference Only VINYL CHLORIDE Method no.: 04 Matrix: Air Target concentration: 1 ppm (2.5 mg/m3) (OSHA PEL) Procedure: Collection on charcoal (two-tubes in-series) , desorption with carbon disulfide, analysis by gas chromatography with a flame ionization detector. Stored in refrigerator and analyzed as soon as possible. Detection limit based on recommended air volume: 0.25 ppm Recommended air volume and sampling rate: 1 L at 0.05 L/min Standard error of estimate at the target concentration: 7.6% (Figure 4.1.) Status of method: Recommended by NIOSH, partially evaluated by OSHA Laboratory. Date:WITHDRAWN April 1979 Chemist: Dee R. Chambers Organic Methods Evaluation Branch OSHA Analytical Laboratory Salt Lake City Utah Note: OSHA no longer uses or supports this method (December 2019). Withdrawn Provided for Historical Reference Only 1. General Discussion 1.1. Background 1.1.1. History In January 1974, B.F. Goodrich Chemical Company informed NIOSH of several deaths among polyvinyl chloride production workers from angiosarcoma, a rare liver cancer. In response to this and other evidence of potential hazards, OSHA lowered the workplace air standard for vinyl chloride (VC) from 500 ppm to 1 ppm 8-h time weighted average. Since the recognition that VC was a carcinogen, a great deal of research into the sampling and analytical methodology has been conducted. Perhaps the most complete and thorough examination has been conducted by Hill, McCammon, Saalwaechter, Teass, and W oodfin for NIOSH titled "The Gas Chromatographic Determination of Vinyl Chloride in Air Samples Collected on Charcoal" (Ref. 5.1.).
    [Show full text]
  • Chlorine Dioxide Compatibility Assessment
    Chlorine Dioxide Compatibility Assessment DRF3366 - TECH-COMM-001 Created by: Tristel Solutions Limited, Lynx Business Park, Cambs, UK, CB8 7NY Copyright © Tristel Solutions T +44 (0) 1638 721500 – E [email protected] – W www.tristel.com January 2018 Key - Excellent - no change at all in the device - Good - slight cosmetic change/ decolourisation – material/device still fully functional - Fair – slight damage is observed– material/device still fully functional - Poor – visible pitting, breaking, brittle METALS Materials of construction 1 2 3 4 (Excellent) (Good) (Fair) (Poor) Stainless Steel 317 (Pure) X Stainless Steel 316 (pure, fully X austenitic with no ferric content) Stainless Steel 304 X (High grade, low ferric content) Hastelloy X Titanium X Aluminium X Aluminium (Anodised) X Brass X Copper X Chrome X Mild Steel X DRF3366 - TECH-COMM-001 Created by: Tristel Solutions Limited, Lynx Business Park, Cambs, UK, CB8 7NY Copyright © Tristel Solutions T +44 (0) 1638 721500 – E [email protected] – W www.tristel.com January 2018 PLASTICS Materials of construction 1 2 3 4 (Excellent) (Good) (Fair) (Poor) Perfluoroelastomer X PEEK X X Polypropylene X PVDF X X Polycarbonate X Polysulphone (natural) X Polysulphone (white) X PET-P X PMMA X Polyamide X Polyethylene X Polyoxymethylene X Acetal X ABS X Polymethylpentene (TPX) (PMP) X DRF3366 - TECH-COMM-001 Created by: Tristel Solutions Limited, Lynx Business Park, Cambs, UK, CB8 7NY Copyright © Tristel Solutions T +44 (0) 1638 721500 – E [email protected] – W www.tristel.com January 2018 PLASTICS
    [Show full text]
  • Module V – Blow and Transfer Molding
    MODULE V – BLOW AND TRANSFER MOLDING Blow Moulding Blow moulding is a process of producing hollow or double wall objects from thermoplastic materials. Basic Process The basic process of blow moulding consists of three stages: 1. Melting and Plasticising – This is accomplished with either extrusion and/or injection moulding machine to produce the melt. 2. Plastic Formation – Through head and die or in an injection mould. 3. Blowing and Moulding – An auxiliary compressor provides air pressure and a clamp unit, which closes over a split mould that is operated with an hydraulic system. Principle The heated parison or preform is placed between two halves of the blowing mould, which closes and clamps around it. The heated tube is blown against the cavity wall and the molten plastic or resin takes the shape of the mould while being cooled. After the cooling stage the part is ejected from the mould. In the case of an extruded part it is necessary to remove the flash (excess plastic around the part) for further finishing. Basic blow moulding process Types of Blow Moulding Blow moulding may use either extrusion or injection methods for processing. Injection Blow Moulding Process (IBM) The term injection blow moulding is the compatible integration of two processes, injection moulding and blow moulding. It is a two-step process. The first stage consists of injection moulding the preform in a mould consisting of a cavity and a hollow core. The second involves moulding and cooling in a follow-on mould. The preform is injection moulded at a temperature which is in the temperature range of the moulding resin and blown at a D.
    [Show full text]
  • Blends of Polycarbonate Containing Fluorinated-Bisphenol-A and Polyvinyl Chloride
    Europaisches Patentamt European Patent Office © Publication number: 0 576 057 A1 Office europeen des brevets EUROPEAN PATENT APPLICATION © Application number: 93201533.2 int. Ci.5; C08L 69/00, C08L 27/06, C08G 64/10, //(C08L69/00, @ Date of filing: 28.05.93 27:06),(C08L27/06,69:00) © Priority: 01.06.92 US 891032 © Applicant: ENICHEM S.p.A. Piazza della Repubblica, 16 @ Date of publication of application: 1-20124 Milano(IT) 29.12.93 Bulletin 93/52 @ Inventor: Drzewinski, Michael A. © Designated Contracting States: 371 Clarksville Road, Princeton Junction AT BE CH DE DK ES FR GB GR IE IT LI LU MC New Jersey 08850(US) NL PT SE © Representative: Roggero, Sergio et al Ing. Barzano & Zanardo Milano S.p.A. Via Borgonuovo 10 1-20121 Milano (IT) © Blends of polycarbonate containing fluorinated-bisphenol-A and polyvinyl chloride. © Bisphenol A polycarbonate containing at least 15 mole % of 2,2-bis-(4-hydroxyphenyl)hexafluoropropane (6F-Bisphenol A) can be blended with polyvinyl chloride (PVC) to form a thermodynamically miscible, transpar- ent, single phase blend at all compositions. Such blends are flame resistant as well as resistant to attack by acids, bases and many organic solvents. CO Rank Xerox (UK) Business Services (3. 10/3.6/3.3. 1) EP 0 576 057 A1 BACKGROUND OF THE INVENTION Field of the Invention: 5 This invention pertains to mixtures of polyvinyl chloride (PVC) and polycarbonates which contain at least 15 mole % of fluorinated bisphenol monomer units (F-PC) such as 2,2-bis-(4-hydroxyphenyl)- hexafluoropropane (6F-bisphenol A), herein referred to as 6F-PC.
    [Show full text]
  • United States Patent (19) 11 Patent Number: 4,481,333 Fleischer Et Al
    United States Patent (19) 11 Patent Number: 4,481,333 Fleischer et al. 45 Date of Patent: Nov. 6, 1984 54 THERMOPLASTIC COMPOSITIONS 58 Field of Search ................................ 525/192, 199 COMPRISING WINYL CHLORIDE POLYMER, CLPE AND FLUOROPOLYMER 56) References Cited U.S. PATENT DOCUMENTS 75) Inventors: Dietrich Fleischer, Darmstadt; Eckhard Weber, Liederbach; 3,005,795 10/1961 Busse et al. ......................... 525/199 3,294,871 2/1966 Schmitt et al. ...... 52.5/154 X Johannes Brandrup, Wiesbaden, all 3,299,182 1/1967 Jennings et al. ... ... 525/192 of Fed. Rep. of Germany 3,334,157 8/1967 Larsen ..................... ... 525/99 73 Assignee: Hoechst Aktiengesellschaft, Fed. 3,940,456 2/1976 Fey et al. ............................ 525/192 Rep. of Germany Primary Examiner-Carman J. Seccuro (21) Appl. No.: 566,207 Attorney, Agent, or Firm-Connolly & Hutz 22 Filed: Dec. 28, 1983 57 ABSTRACT 30 Foreign Application Priority Data The invention relates to a thermoplastic composition which comprises vinyl chloride polymers and chlori Dec. 31, 1982 (DE Fed. Rep. of Germany ....... 3248.731 nated polyethylene and which contains finely divided 51) Int. Cl. ...................... C08L 23/28; C08L 27/06; fluoropolymers and has a markedly improved process C08L 27/18 ability, particularly when shaped by extrusion. 52 U.S. C. .................................... 525/192; 525/199; 525/239 7 Claims, No Drawings 4,481,333 2 iaries and do not provide a solution to the present prob THERMOPLASTC COMPOSITIONS lem. COMPRISINGVINYL CHLORIDE POLYMER,
    [Show full text]
  • SARAN™ Polyvinylidene Chloride (PVDC) Resins
    Product Safety Assessment SARAN™ Polyvinylidene Chloride (PVDC) Resins Product Safety Assessment documents are available at www.dow.com/productsafety/assess/finder.htm. Select a Topic: Names Product Overview Manufacture of Product Product Description Product Uses Exposure Potential Health Information Environmental Information Physical Hazard Information Regulatory Information Additional Information References Names CAS Nos. 25038-72-6, 9011-06-7 Vinylidene chloride copolymer SARAN polyvinylidene chloride (PVDC) resins Vinylidene chloride/methyl acrylate copolymer SARAN resins Vinylidene chloride/vinyl chloride copolymer Back to top Product Overview SARAN™ resins are white, odorless granules.1 These resins are polyvinylidene chloride (PVDC) copolymers made from polymerizing vinylidene chloride with comonomers like vinyl chloride and alkyl acrylates.2 For further information, see Product Description. SARAN resins are used extensively in packaging applications for food, pharmaceuticals, hygiene products, and sterilized medical products. They offer excellent barrier performance to moisture, oxygen, and odors.3 For further information, see Product Uses. Because SARAN resins are used extensively in food packaging, it is possible for consumers to come into contact with them. Workplace exposure is also possible.4 For further information, see Exposure Potential. SARAN resins are essentially nonirritating to the eyes and skin. Dust from SARAN products may cause temporary mechanical irritation to the skin and eyes under extreme conditions. However, the products are considered to present no significant health hazard.5 For further information, see Health Information. SARAN resins are expected to be inert in the environment. They are unlikely to accumulate in the food chain, and are practically nontoxic to aquatic organisms on an acute basis.6 For further information, see Environmental Information.
    [Show full text]
  • Sample Pages Plastics Technology
    Sample Pages Plastics Technology Christian Bonten ISBN (Book): 978-1-56990-767-2 ISBN (E-Book): 978-1-56990-768-9 For further information and order see www.hanserpublications.com (in the Americas) www.hanser-fachbuch.de (outside the Americas) © Carl Hanser Verlag, München Preface Immediately after I started working at the University of Stuttgart in late summer 2010, I revised the course “Fundamentals of Plastics Technology” with the help of my scientific staff. Since then, this important course has been held unchanged in Stuttgart for a long time. During the revision we not only updated figures and contents, but also gave the course a new structure, which I – inspired by didactic seminars of the German University Association – consider more contemporary. Numerous film sequences used in the lectures enable the students to understand the contents more quickly and deeply. I am convinced that the students in my course become well equipped with a comprehensive, fundamental knowledge of plastics and plastics technology for their upcoming professional life. If students want to deepen their knowledge of the subject, they can do so in the three main areas of “Materials Engineering”, “Processing Technology”, and “Product Engi- neering” in other courses later on. This introductory and fundamental lecture series in Stuttgart is an elective course with four lessons per week for master students of process engineering, mechanical engineering (e. g. production engineering, automotive engineering), materials sci- ence, as well as of technology management. The course is actually aimed at techni- cally educated students, but in the meantime non-technical students (economics, environmental issues) choose the course as well.
    [Show full text]
  • Recent Attempts in the Design of Efficient PVC Plasticizers With
    materials Review Recent Attempts in the Design of Efficient PVC Plasticizers with Reduced Migration Joanna Czogała 1,2,3,* , Ewa Pankalla 2 and Roman Turczyn 1,* 1 Department of Physical Chemistry and Technology of Polymers, Silesian University of Technology, Strzody 9, 44-100 Gliwice, Poland 2 Research and Innovation Department, Grupa Azoty Zakłady Azotowe K˛edzierzynS.A., Mostowa 30A, 47-220 K˛edzierzyn-Ko´zle,Poland; [email protected] 3 Joint Doctoral School, Silesian University of Technology, Akademicka 2A, 44-100 Gliwice, Poland * Correspondence: [email protected] (J.C.); [email protected] (R.T.) Abstract: This paper reviews the current trends in replacing commonly used plasticizers in poly(vinyl chloride), PVC, formulations by new compounds with reduced migration, leading to the enhance- ment in mechanical properties and better plasticizing efficiency. Novel plasticizers have been divided into three groups depending on the replacement strategy, i.e., total replacement, partial replacement, and internal plasticizers. Chemical and physical properties of PVC formulations containing a wide range of plasticizers have been compared, allowing observance of the improvements in polymer per- formance in comparison to PVC plasticized with conventionally applied bis(2-ethylhexyl) phthalate, di-n-octyl phthalate, bis(2-ethylhexyl) terephthalate and di-n-octyl terephthalate. Among a variety of newly developed plasticizers, we have indicated those presenting excellent migration resistance and advantageous mechanical properties, as well as those derived from natural sources. A separate chapter has been dedicated to the description of a synergistic effect of a mixture of two plasticizers, primary and secondary, that benefits in migration suppression when secondary plasticizer is added to PVC blend.
    [Show full text]
  • Toxicity of the Pyrolysis and Combustion Products of Poly (Vinyl Chlorides): a Literature Assessment
    FIRE AND MATERIALS VOL. II, 131-142 (1987) Toxicity of the Pyrolysis and Combustion Products of Poly (Vinyl Chlorides): A Literature Assessment Clayton Huggett and Barbara C. Levin* us Department of Commerce, National Bureau of Standards, National Engineering Laboratory, Center for Fire Research, Gaithersburg, MD 20899, USA Poly(vinyl chlorides) (PVC) constitute a major class of synthetic plastics. Many surveys of the voluminous literature have been performed. This report reviews the literature published in English from 1969 through 1984 and endeavors to be more interpretive than comprehensive. pve compounds, in general, are among the more fire resistant common organic polymers, natural or synthetic. The major products of thermal decomposition include hydrogen chloride, benzene and unsaturated hydrocarbons. In the presence of oxygen, carbon monoxide, carbon dioxide and water are included among the common combustion products. The main toxic products from PVC fires are hydrogen chloride (a sensory and pulmonary irritant) and carbon monoxide (an asphyxiant). The LCso values calculated for a series of natural and synthetic materials thermally decomposed according to the NBS toxicity test method ranged from 0.045 to 57 mgl-l in the flaming mode and from 0.045 to > 40mgl-l in the non-flaming mode. The LCso results for a PVC resin decomposed under the same conditions were 17 mg 1- 1 in the flaming mode and 20 mg 1- 1 in the non-flaming mode. These results indicate that PVC decomposition products are not extremely toxic when compared with those from other common building materials. When the combustion toxicity (based on their HCI content) of PVC materials is compared with pure HCI experiments, it appears that much of the post-exposure toxicity can be explained by the HCI tha t is genera ted.
    [Show full text]
  • Plastic Materials List Original.Xlsx
    Partec Institute 1030 Cavendish Rd. Mt. Gravatt East. Brisbane Qld 4122 Ph 07 3849 7878. www.partec.qld.edu.au ABREVIATIONS OF POLYMER MATERIALS AAS acrylonitrile acrylic styrene PE polyethylene ABS acrylonitrile butadiene styrene PEO poly (ethylene oxide) AES acrylonitrile ethylene ester PEP polyethylene propylene A/MMA acrylonitrile / methyl methacrylate PESU polyether sulphone AS acrylonitrile styrene PET polyethylene terephthalate ASA acrylonitrile styrene acrylate PETP crystaline pet (tetramethylene terephthalate) BMC bulk moulding compound PEX polyethylene crosslinked CA cellulose acetate PF phenol formaldehyde resin CAB cellulose acetate butyrate PI polyimide CAP cellulose acetate propionate PIB polyisobutylene CF cresol formadehyde PMMA polymethyl methacrylate CLPE chlorinated polyethylene PMP poly (4-methylpentene- I ) CLPVC /CPVC chlorinated polyvinyl chloride POB polypoxybenzoate CMC carboxymethyl cellulose POM polyoxymethylene (polyacetal) CN cellulose nitrate PP polypropylene CP cellulose propionate PPC polypropylene compound CPE chlorinated polyethylene PPE polypropylene ethylene CS casein PPF polypropylene foam DAP diallyl phthalate PPO polyphenylene oxide modified DMC dough molding compound PPDX polypropylene oxide EC ethyl cellulose PPS polyphenylene sulphide E/EA, EEA ethylene / ethyl acetate PPSU polyphenylene sulphone EEBC polyester (ether ester block copolymer) PS polystyrene E / MA ethylene methacrylate acid PSU polysulphone EP epoxide, epoxy resin PTFE polytetrafluoethylene EPS polystyrene - expandable ethylene
    [Show full text]
  • Table 1. SOME NAMES and ABBREVIATIONS of Plastics and Elastomers
    TABlE 1. SOME NAMES AND ABBREVIATIONS OF PlASTICS AND ElASTOMERS. Common name Abbreviation Acetal (homopolymer and copolymer) POM-H and POM-K Acrylate styrene acrylonitrile ASAorAAS Acrylate modified styrene acrylonitrile ASAorAAS Acrylic acid ester rubber ACM Acrylonitrile butadiene rubber or nitrile butadiene rubber NBR Acrylonitrile butadiene styrene ABS Acrylonitrile styrene/chlorinated polyethylene ACS Acrylonitrile methyl methacrylate AMMA Acrylonitrile styrene/EPR rubber or, acrylonitrile ethylene propylene styrene AES Alpha methyl styrene AMS Atactic polypropylene APPorPP-A Butadiene rubber or, cis-1,4-polybutadiene rubber or, polybutadiene rubber BR Butadiene styrene block copolymer BDS Butyl rubber IIR Bulk molding compound BMC Casein formaldehyde CF Cellulose acetate CA Cellulose acetate butyrate CAB Cellulose acetate propionate CAP Cellulose nitrate CN Chlorinated polyethylene CPEorCM Chlorinated polyvinyl chloride CPVC or, PVC-C Chloro-polyethylene or, chlorinated polyethylene. CM or CPE or, PE-C Chloroprene rubber or, polychloroprene rubber CR Chlorotrifluoroethylene ethylene copolymers ECfFE Cis-polyisoprene or, cis-1,4-polyisoprene IR Coumarone indene resins CIR Diallyl phthalate DAP Diallyl isophthalate DAIP Dough molding compound DMC Elastomeric alloy melt processable rubber EA-MPR Elastomeric alloy thermoplastic vulcanizate EA-TPV Epichlohydrin rubber CHR Epoxy or, epoxide EP Epoxy or, epoxide, with glass fiber EPGF Ethyl cellulose EC Ethylene acryic acid EAA Ethylene propylene diene monomer (an EPR terpolymer) EPDM
    [Show full text]
  • Effects of Polypropylene, Polyvinyl Chloride, Polyethylene Terephthalate, Polyurethane, High
    Effects of polypropylene, polyvinyl chloride, polyethylene terephthalate, polyurethane, high- density polyethylene, and polystyrene microplastic on Nelumbo nucifera (Lotus) in water and sediment Maranda Esterhuizen ( maranda.esterhuizen@helsinki. ) University of Helsinki: Helsingin Yliopisto https://orcid.org/0000-0002-2342-3941 Youngjun Kim Korea Institute of Science and Technology Europe Forschungsgesellschaft mbH Research Article Keywords: Microplastics, oxidative stress, sediment, macrophyte, exposure, germination, seedling growth Posted Date: May 11th, 2021 DOI: https://doi.org/10.21203/rs.3.rs-458889/v1 License: This work is licensed under a Creative Commons Attribution 4.0 International License. Read Full License Loading [MathJax]/jax/output/CommonHTML/jax.js Page 1/20 Abstract Plastic waste is recognised as hazardous, with the risk increasing as the polymers break down in nature to secondary microplastics or even nanoplastics. The number of studies reporting on the prevalence of microplastic in every perceivable niche and bioavailable to biota is dramatically increasing. Knowledge of the ecotoxicology of microplastic is advancing as well; however, information regarding plants, specically aquatic macrophytes, is still lacking. The present study aimed to gain more information on the ecotoxicological effects of six different polymer types as 4 mm microplastic on the morphology (germination and growth) and the physiology (catalase and glutathione S-transferase activity) of the rooted aquatic macrophyte, Nelumbo nucifera. The role of sediment was also considered by conducting all exposure both in a sediment-containing and sediment-free exposure system. Polyvinyl chloride and polyurethane exposures caused the highest inhibition of germination and growth compared to the control. However, the presence of sediment signicantly decreased the adverse effects.
    [Show full text]