Lim2015 Advance Program, Monday, 22.6.2015 Registration

LiM2015 Advance Program, Monday, 22.6.2015

08:00 - 09:00 Registration

ICM Ground Floor/1st Floor, Room 1 WoP Opening and Plenary Session

09:00 - WoP-Opening Ceremony and Plenary WoP 11:00 Session

Coffee break

ICM 1st Floor, Room 13b LiM Plenary Session and WLT ceremony, Chair A. Ostendorf & T. Graf 11:15 - Andreas Ostendorf Welcome to LiM 11:30 Thomas Graf

11:30 - The Extreme Light Infrastructure (ELI) Wolfgang Sandner 12:00

12:00 - Laser-sintering: laser-based industrial Tobias Abeln 12:30 3D printing

12:30 - WLT Award Ceremony Andreas Ostendorf 12:45

12:45 - Price Winning Topic Price Winner 13:15

Lunch

Program subject to change without notice Update 02.06.2015 LiM2015 Advance Program, Monday, 22.6.2015 LiM2015 Advance Program, Monday, 22.6.2015 LiM2015 Advance Program, Monday, 22.6.2015

Suck-Joo Na Flow and bead formation characteristics in high Laser based surface structuring for Max Kahmann Sputter-free and Reproducible Laser Welding of Elke Kaiser 14:30 - Sang-Woo Han, Sohail Muhammad, Linjie power laser welding at different welding positions lightweight design Ulf Quentin, Marc Kirchhoff, Rüdiger Electric or Electronic Copper Contacts with a Rudolf Huber, Christian Stolzenburg, 14:45 Zhang, Andrey Gumenyuk, Michael (Invited) (Invited) Brockmann, Klaus Löffler Green Laser Alexander Killi Rethmeier, Miikka Karhu, Veli Kujanpaa

14:45 - Heiko Brüning Energy efficiency in laser rod end melting 15:00 Frank Vollertsen

Investigation and application of laser induced Viktor Schütz 15:00 - Energy-Efficient Industrial Production with Matthias Koitzsch Maximilian Brosda surface functionalization with pulse delays Jürgen Koch, Oliver Suttmann, Ludger Laserwelding of transparent polymer films 15:15 High-Power Disk- and Direct Diode-Lasers Volker Rominger Viktor Mamuschkin between 40ns and 50µs on silicon and steel foils Overmeyer

Aline Capella Oliveira José L. Ocaña Frederick Vinzent 15:15 - Yb:fiber laser joining of Ti-6Al-4V and One-Step Generation of Ultrahydrophobic Rudimar Riva, Natalia Maria Antonangelo Radhakrishnan Jagdheesh, Juan J. García- High precise welding of transparent polymers Michael Schwalme, Tobias Jaus, Manuel 15:30 AA6013 dissimilar metals Aluminum Surface Patterns by Nanosecond Lasers Athanazio Ballesteros Sieben

Annalisa Volpe Tim Radel Structuring of injection moulding tools with Caterina Gaudiuso, Andrea De Rosa, 15:30 - Influence of different zinc coatings on laser Felix Dreisow Direct bonding of transparent PMMA using Marius Gatzen, Peer Woizeschke, Claus ultrashort laser pulses for surface Rebeca Martínez Vázquez, Antonio 15:45 brazing of aluminum to steel Sebastian Wächter, Sabine Sändig an ultrafast fiber CPA laser system Thomy functionalization after casting Ancona, Pietro Mario Lugarà, Roberto Osellame

Hendrik Sändker Influence of Welding Parameters and Stack 15:45 - Laser Beam Welding of press hardened ultra- Benjamin Gerhards Laser beam propagation and energy deposition Jochen Stollenwerk, Johannes Hofmann, Configuration on Pore Formation of Laser Welded Thomas Engelhardt 16:00 high strength 22MnB5 steel Uwe Reisgen, Simon Olschok, Oliver Engels in particulate PEEK layers Peter Loosen Aluminum Foil Stacks

Coffee break Coffee break Coffee break

Macro Processing: Joining (Welding, Brazing) (Mo_A2_2), Chair J. Powell Micro Processing: Surface Functionalization (Mo_A32_2), Chair A. Conzelmann Micro Processing: Micro Joining (Welding and Brazing) (Mo_A31_2), Chair M. Kogel-Hollacher Alexander Gatej Norbert Schneider Use of high-energy laser radiation for surface Camera based closed-loop control of laser micro- Andreas Blug 16:30 - Markus Kogel-Hollacher, David Blázquez- Christian Wrobel, Jens Dr. 3D-capable Coaxial Laser Brazing Head preparation of magnesium for adhesive welding processes by observation of the full Volker Jetter, Daniel Carl, Simon Gutscher, 16:45 Sánchez, Andreas Bobrowski, Andreas Holtmannspoetter, Guenther Prof. Dr. applications penetration hole Jan Nekarda Niete, Nicholas Blundell, Kevin Withers Loewisch

Karin Heller 16:45 - Robust false friend detection via Nanostructures fabricated by laser interference Evaldas Stankevičius Arnaud Francois Steffen Kessler, Friedhelm Dorsch, Peter Laser welding simulation of microfluidic devices 17:00 thermographic imaging lithography and their potential applications Mantas Garliauskas, Gediminas Račiukaitis Anne Henrotin, Jose A. Ramos Berger, Thomas Graf

Investigation of the influence of laser surface Ingo Roß 17:00 - Correlation of keyhole dynamics and Joerg Volpp Thermal analysis of Laser Transmission Welding of Adhish Majumdar modifications on the adhesive wear behavior in André Temmler, Edgar Willenborg, Marco 17:15 pore formation Frank Vollertsen thermoplastics: Indicators of weld seam quality Benjamin Lecroc, Laurent D'Alvise dry cold extrusion of aluminum Teller

Fabrication of graphene-chitosan electrodes for Romualdas Trusovas Effect of processing parameters in welding of Guijun Bi 17:15 - Properties of steel-aluminum joints generated by Sascha Frank sensing applications by laser induced Raimonda Celiešiūtė, Rasa Pauliukaite, biocompatible polymer film to metal sheet using Hui-Chi Chen, Juan Carlos Hernandez 17:30 combining continuous and pulsed laser radiation modification of the composite film Gediminas Račiukaitis an infrared laser source Castaneda, Hong Xie

Felix Möller Adjustment and Impact of the Thermoplastic 17:30 - Laser-GMA-Hybrid Welding of high strength Influence of laser marking on stainless steel Klaus Schricker Helge Kügler, Sven-F. Goecke, Frank Martin Kucera Microstructure of the Melting Layer in Laser- 17:45 multi-material joints surface and corrosion resistance Martin Stambke, Jean Pierre Bergmann Vollertsen based Joining of Polymers to Metals

Philippe Delaporte Laser cleaning of Aluminium alloy for automotive Jens Rauschenberger 17:45 - Daniel Puerto, Emeric Biver, Catalin Laser hybrid joining of plastic and metal component welding Lin Li High velocity laser printing of conductive tracks Asier Cenigaonaindia, Jan Keseberg, Ulrich 18:00 Constantinescu, Dimitris Karnakis, Anne- components for lightweight assemblies (Invited) Gubler, Fernando Liébana Patricia Alloncle

Program subject to change without notice Update 02.06.2015 LiM2015 Advance Program, Tuesday, 23.6.2015 LiM2015 Advance Program, Tuesday, 23.6.2015 LiM2015 Advance Program, Tuesday, 23.6.2015

Laser welding inspection on aeronautic material João Marcos Salvi Sakamoto Adjustment of surface energy on steel surfaces Tom Häfner 08:30 - with non-contact real-time optical beam Renan Borges Marques, Rudimar Riva, due to CLP generation by picosecond laser Johannes Heberle, Daniel Holder, Michael 08:45 deflection sensor Cláudio Kitano, Gefeson Mendes Pacheco processing Schmidt Sandra Höhm Three-dimensional, multi-factor monitoring and Paul J. L. Webster Tribological surface functionalization via Jörn Bonse, Robert Koter, Manfred Hartelt, Frank Schneider 08:45 - Laser Cutting and Joining in a Novel Process control of laser keyhole welding by inline Christopher M. Galbraith, Cole Van Vlack, femtosecond laser-induced periodic Dirk Spaltmann, Simone Pentzien, Stephan Christoph Engelmann, Norbert Wolf, 09:00 Chain for Fibre Reinforced Plastics coherent imaging Daniel R. Buckley, James M. Fraser surface structures on metals Marschner, Alexandre Mermillod-Blondin, Wolfgang Moll, Dirk Petring Arkadi Rosenfeld, Jörg Krüger Philippe Ackermann 3D weld seam characterization based on Jyotsna Dutta Majumdar Analytical Model for Laser Cutting of Carbon Fiber Alexander N. Fuchs 09:00 - Guilherme Mallmann, Robert Schmitt, Jean Studies on Laser Surface Texturing of optical coherence tomography for laser-based Renu Kumary, Heino Besser, Tim Fabrics: Maximum Cutting Speed and Heat Thomas Woldrich, K. Manfred Heimhilger, 09:15 Pierre Bergmann, Klaus Schricker, Martin Titanium Alloy (Ti-6Al-4V) thermal joining of thermoplastics to metals Scharnweber, Wilhelm Pfleging Affected Zone Michael F. Zaeh Stambke

Antonio Ancona 09:15 - Influence of a second heat source on the Falk Nagel Non-uniform micro-texturing of tribological Giuseppe Carbone, Michele Scaraggi, Martin Griebel Ultrafast Lasers Jump to Macro Applications 09:30 distortion behaviour during laser beam welding Jean Pierre Bergmann steel surfaces by femtosecond laser ablation Annalisa Volpe, Michele De Filippis, Pietro Jan Langebach Mario Lugarà

Alexander Kaplan Yuji Sato 09:30 - Controlled metal transfer from wire by a Mohammad Javad Torkamany, F. Malek Generation of low-spatial frequency Laser Induced Stefan Rung Effect of several gas ambiences on HAZ Masahiro Tsukamoto, Fumihiro Matsuoka, 09:45 laser-induced boiling front Ghaini, Mikko Vänskka, Antti Salminen, Periodic Surface Structures Driven by Surface Finish Florian Preusch, Ralf Hellmann suppression in CFRP cutting with nanosecond laser Kensuke Yamashita, Kenjiro Takahashi, Karl Fahlström, Joakim Hedegård Shinichiro Masuno Joint session with ECLEO,. Room 13a Capillary geometries during welding of metals Selective Femtosecond-Laser Structuring of Stephan Rapp Analysis of potentially hazardous substances Jürgen Walter 09:45 - observed with X-ray technique and calculated Peter Wolfgang Berger Dielectric Thin Films with Different Band Gaps: Gerrit Heinrich, Heinz P. Huber, Michael emitted during laser processing of carbon Christian Hennigs, Michael Huse, Michael 10:00 using a ray-tracing tool and a finite volume Andreas Heider, Meiko Boley A Time-Resolved Study of Ablation Mechanisms Schmidt fiber reinforced plastics Hustedt, Stefan Kaierle, Ludger Overmeyer program treating heat diffusion and fluid flow

Coffee break Coffee break Coffee break

Macro Processing: Joining (Welding, Brazing) (Tu_A2_2), Chair S. Olschok Micro Processing: Processing of Transparent Materials (Tu_A32_2), Chair O. Suttmann Macro Processing: CFRP (Tu_A31_2), Chair A. Gillner

Masayuki Fujita Influence of residual stresses induced by Peter Stritt Vitaly Ivanovich Konov 10:30 - Pulsed laser induced photo ablation of diamond High Power UV Laser Processing of CFRP with Short Hiroshi Ohkawa, Toshihiro Somekawa, forming on the hot cracking sensitivity of laser Christian Hagenlocher, Rudolf Weber, Vitali Viktorovich Kononenko, Maxim 10:45 (Invited) ns Pulses and Pulse Splitting Takaomi Matsutani, Yoshinobu Maeda, Jim welding processes of AlMgSi aluminum alloy Thomas Graf Sergeevich Komlenok Bovatsek, Rajesh Patel, Noriaki Miyanaga

Hans Langrieger Theoretical and experimental determination of 10:45 - Fundamental analyses of hot cracks in remote Christian Wilhelm Freitag Frank Krafft, Martin Mensinger, Florian the polarization dependent absorptance of laser 11:00 laser welded aluminium fillet welds Lukas Alter, Rudolf Weber, Thomas Graf Oefele radiation in carbon fibers and CFRP

Marcel Schaefer Christoph Engelmann 11:00 - Analysing Hot Crack Formation in Laser Welding of Metal meets Composite - Hybrid Joining Nicolai Speker, Rudolf Weber, Thomas Nanosecond laser processing of diamonds Jan-Patrick Hermani Daniel Meier, Alexander Olowinsky, 11:15 Tempered Steel for Automotive Applications Graf, Thomas Harrer Mathieu Kielwasser

Daniel Weller Oliver Suttmann Laser Induced Micro-Dot Generation Inside Temperature monitoring independent of laser- 11:15 - Online crack detection during laser welding Peter Stritt, Florian Fetzer, Rudolf Weber, Alexandre Mermillod-Blondin Hagen Dittmar, Verena Wippo, Peter Transparent Materials: A) Formation Dynamics, beam-position during laser transmission welding 11:30 using passive thermography Thomas Graf, Cyrille Bezençon, Jörg Simon, Arkadi Rosenfeld, David Ashkenasi Jaeschke, Helmut Kriz, Chris Beaver, Ludger Refractive Character and Internal Stress of fibre reinforced thermoplastics Corrado Bassi Overmeyer

Matthias Holzer Influence of filler wire and focus diameter on Laser Induced Micro-Dot Generation Inside David Ashkenasi Cutting of CFRP with short-pulsed lasers at 1 Margit Wiedenmann 11:30 - Fabian Hoppe, Vincent Mann, Konstantin crack formation in laser beam welding of high Transparent Materials: B) Process Manuela Schwagmeier, Alexandre µm and 10 µm wavelength and average powers Christian Freitag, Matthias Haug, Volkher 11:45 Hofmann, Florian Hugger, Stephan Roth, strength aluminum alloys Implementation, Optimization and Utilization Mermillod-Blondin, Arkadi Rosenfeld of more than 1 kW Onuseit, Rudolf Weber, Thomas Graf Michael Schmidt

Malte Kumkar Tuning the Energy Deposition of Ultrashort 11:45 - Klaus Bergner, Daniel Flamm, Daniel Pulses inside Transparent Materials for Laser 12:00 Grossmann, Myriam Kaiser, Jonas Kleiner, Cutting Applications Stefan Nolte

Lunch Lunch Lunch

Program subject to change without notice Update 02.06.2015 LiM2015 Advance Program, Tuesday, 23.6.2015 LiM2015 Advance Program, Tuesday, 23.6.2015 LiM2015 Advance Program, Tuesday, 23.6.2015

Room "Edison", 1st Floor, Exhibition Hall A2 (A21/A22) Room "Newton 2", 1st Floor, Exhibition Hall A3 (A32) Room "Newton 1", 1st Floor, Exhibition Hall A3 (A31) Macro Processing: Joining (Welding, Brazing) (Tu_A2_3), Chair M. Rethmeier Micro Processing: Processing of Transparent Materials (Tu_A32_3), Chair O. Suttmann Macro Processing: CFRP (Tu_A31_3), Chair M. Zäh Paul Christiaan Verburg Michael Rose Fundamental Research of 100 kW Fiber Seiji Katayama Laser-Induced Subsurface Modification of Experimental and analytical description of the 14:00 - Lachlan Smillie, Gert-Willem Römer, Bianca Andreas Fürst, Dominik Hipp, Annett Laser Welding Technology Masami Mizutani, Yousuke Kawahito, Silicon Wafers multi-wavelength remote-laser ablation process at 14:15 Haberl, Jodie Bradby, Jim Williams, Bert Klotzbach, Jan Hauptmann, Andreas (Invited) Shingo Ito, Daichi Sumimori (Invited) fiber reinforced polymers Huis in ’t Veld Wetzig, Eckhard Beyer

Remote Laser Cutting of CFRP: Increased 14:15 - Johannes Wolfgang Stock Fatigue Strength as a Consequence of the Heat 14:30 Michael F. Zaeh Affected Zone

Marten Canisius Andreas Heider 14:30 - Influence of Ambient Pressure on Spatter Investigation on Bragg grating formation in Simon Kibben Correlation between temperature field and Max Oberlander, Dirk Herzog, Matthias Thomas Engelhardt, Rudolf Weber, 14:45 Formation during Laser Welding of Copper a perfluorinated polymer optical fiber Michael Koerdt, Frank Vollertsen heat affected zone during laser cutting of CFRP Schmidt-Lehr, Petter Ploog, Claus Thomas Graf Emmelmann

Stefan Jakobs Laser-remote-cutting of large-scale semi- Max Oberlander 14:45 - Laser Beam Welding in Vacuum – Overview of New approach for laser processing of Michael Grimm Uwe Reisgen, Simon Olschok, Christoph finished carbon-fibre products using a solid state Matthias Schmidt-Lehr, Dirk Herzog, 15:00 Thick-Plate Steel Application and Beyond transparent materials Michael Werner, Robin Zimny Turner laser Marten Canisius, Claus Emmelmann

Volkher Onuseit Klaus Schütt Hansen Torben Prieß, Christian Freitag, Margit 15:00 - David Ashkenasi Multispot laser welding to improve process stability Flemming O. Olsen, Morten Kristiansen, Straightforward Laser Machining of Thin Glass Productive Laser Processing of CFRP Wiedenmann, Birgit Faisst, Roswitha Giedl- 15:15 Tristan Kaszemeikat, Norbert Mueller Ole Madsen Wagner, Thomas Rettich, Rudolf Weber,

Peter Middendorf, Thomas Graf Joint session with ECLEO,. Room 13a

Lara Bauer 15:15 - Online Detection of Pore Formation during Meiko Boley Influence of Pulse Duration on the Glass Uwe Keller, Simone Russ, Malte Kumkar, 15:30 Laser Deep-Penetration Welding Rudolf Weber, Thomas Graf Cutting Process Birgit Faisst, Thomas Graf

Coffee break Coffee break Coffee break

Macro Processing: Joining (Welding, Brazing) (Tu_A2_4), Chair R. Holtz Micro Processing: Processing of Transparent Materials (Tu_A32_4), Chair O. Suttmann (Tu_A31_4),

Influence of laser power modulation on the time- Michael Jarwitz 16:00 - Laser controlled ion exchange process and Xinghua Li resolved temperature distribution in the weld Florian Fetzer, Peter Stritt, Rudolf Weber, 16:15 its applications Garner Sean pool during laser welding of copper to aluminum Thomas Graf

Rodrigo Gómez Vázquez Fabrication of micropump device with mixing 16:15 - Valdemar Stankevič Simulation of Laser Welding of Dissimilar Metals Andreas Otto, Gerhard Liedl, Robert functionality in fused silica with ultrashort 16:30 Gediminas Račiukaitis Feichtenschlager laser pulses

Florian Fetzer 16:30 - Laser Power Modulation to Minimize the Laser line etching technique using the Chwan-Huei Tsai Michael Jarwitz, Rudolf Weber, Thomas 16:45 Electrical Resistance of Auminum-Copper Welds nozzle-induced bubble jet impact for glass Di-Wen Chiue Graf

Vincent Mann 16:45 - Influence of filler wires on weld seam properties Rear Side Processing of Soda-Lime Glass Using DPSS Juozas Dudutis Matthias Holzer, Fabian Gärtner, Florian 17:00 of laser beam welded dissimilar copper Nanosecond Laser Paulius Gečys, Gediminas Račiukaitis connections Hugger, Stephan Roth, Michael Schmidt

Comparison of Mechanical and Microstructural Antonio Jorge Abdalla Sebastian Heidrich 17:00 - Milton Sérgio Fernandes Lima, Leonardo Glass Processing with High Power Q-Switch Characteristics in Maraging 300 Steel Welded by Christian Weingarten, Edgar Willenborg, 17:15 Fanton, Cecília Vieira Gomes, Sandro Lombardo, CO2 Laser Radiation three different processes: LASER, PLASMA and TIG. Deivid Ferreira Silva, Paulo Roberto Sakai Reinhart Poprawe Joint session with ECLEO,. Room 13a

Florian Hugger Gordon Zyla 17:15 - Keyhole shape and element loss in laser Precise structuring by 2-photon absorption Vincent Mann, Matthias Holzer, Stephan Andreas Aumann, Sarah Isabelle Ksouri, 17:30 beam welding of brass alloys in positive photoresist materials Roth, Michael Schmidt Evgeny Gurevich, Andreas Ostendorf

Regina Moser 17:30 - Experimental Studies of Fiber Laser Welding of Thermal simulation of confined SiO2/Si Mohammed Naeem Niko Burkard, Jürgen Sotrop, Heinz P. 17:45 a Range of Dissimilar Material Combinations laser ablation Huber, Gerd Marowsky

19:00 - LiM Get together Augustiner Bier Keller LiM Get together Augustiner Bier Keller LiM Get together Augustiner Bier Keller 23:00

Program subject to change without notice Update 02.06.2015 LiM2015 Advance Program, Wednesday, 24.6.2015 LiM2015 Advance Program, Wednesday, 24.6.2015 LiM2015 Advance Program, Wednesday, 24.6.2015

Influence of Laser Power and Wavelength on the Jörg Hermsdorf Hannes Freiße 08:30 - Theoretical Analysis of Laser Cutting of Metals at Resonant Interaction between Laser Radiation Benjamin Emde, Michael Huse, Stefan Additive manufacturing of a deep drawing tool Jochen Vorholt, Thomas Seefeld, Frank Michael Heinrich Brügmann 08:45 1 and 10 micrometer wavelength and TIG Welding Arc Kaierle, Volker Wesling, Ludger Overmeyer Vollertsen

Barbara Previtali Rudimar Riva Influence of a short time heat treatment on the Performance and efficiency of an industrial Giovanni Riva, Erica Librera, Maurizio 08:45 - Crack-Free autogenous one-side laser welding of a Matthias Graser Rafael Humberto Mota de Siqueira, Milton formability and aging characteristics of direct diode source with an extremely low BPP in Sbetti, Mattia Vanin, Giacomo Biscaglia, 09:00 6013 aluminium alloy-joint for aircraft applications Marion Merklein, Michael Lechner Sérgio Fernandes de Lima aluminum profiles laser cutting of Fe-based and reflective alloys Francesco Villa, Bien Chann, Bryan Lockman

09:00 - Laser Beam Welding of WASPALOY for Laser Surface Treatment of electroless Ni–P- Reza Shoja Razavi Effect of the laser beam polarization state on Alexander Golyshev Reza Shoja Razavi 09:15 Aeronautic Engine Application SiC coating on Al356 alloy Sayed Hamid Hashemi the laser cut surface quality Victor Shulyatyev, Anatoly Orishich

Modeling of powder consolidation coupled with Peter Rauscher 09:15 - Andrey V. Gusarov Characterization of the effect of laser scribing Multiple Wavelength Laser Processing Joe Hillman heat transfer at selective laser melting of fused Jan Hauptmann, Jörg Kaspar, Andreas 09:30 Roman S. Khmyrov, Cyrill E. Protasov on the isolation coating of electrical steel Technology for Flexible Manufacturing Yefim Sukhman, Chris Risser silica Wetzig, Eckhard Beyer

Sven Bluemel Reconditioning of lamellar graphite cast iron Remote laser cutting of composites with a 09:30 - Properties of large 3D parts made from Stellite Hannes Freiße Dipl.-Ing. Mauritz Möller Veit Angrick, Stefan Bastick, Peter parts by means of Laser-Cladding and heuristic- fibre guided thin-disk nanosecond high power 09:45 21 through direct powder deposition Pavel Khazan, Malte Stroth, Henry Köhler Prof. Dr.-Ing. Claus Emmelmann Jaeschke, Oliver Suttmann, Ludger based process parameter adaption laser Overmeyer

Daniel Koutny André Temmler 09:45 - High Strength Al-Cu Alloys Processed Using Surface structuring by laser remelting of Inconel David Palousek, Ondrej Koukal, Tomas Tobias Schmickler, Edgar Willenborg, F-Theta at Jenoptik - a holistic approach Tim Baldsiefen 10:00 400W Selective Laser Melting 718 Zikmund, Libor Pantelejev, Filip Dokoupil Konrad Wissenbach

Coffee break Coffee break Coffee break

Micro Processing: Ablation, Drilling and Micro-Cutting (We_A2_2), Chair A. Ostendorf Macro Processing: Surface Treatment and Cladding (We_A32_2), Chair T. Seefeld Macro Processing: Cutting (We_A31_2), Chair A. Wetzig

Volker Krink 10:30 - Multi parallel ultrashort pulse laser processing Arnold Gillner Reconditioning of HPT Blade Tips Laser or Plasma Cutting – Is there a Knut Partes Thomas Dr. Rümenapp, Michael Dr. 10:45 (Invited) M. Jüngst, P. Gretzki (Invited) Choice?(Invited) Schnick, Nicole Dönicke

10:45 - 11:00

Wagner de Rossi Patrícia Alves Barbosa, Marcelo Bertolete, 11:00 - Investigation of Femtosecond Laser Texturing High Speed Quasi-CW Fibre Laser Drilling Sundar Marimuthu Ramūnas Šniaukas Ricardo Elgul Samad, Nilson Dias Vieira Laser Micro-Cutting of Thick Tungsten Sheets 11:15 in Cemented Carbide Cutting Tools of Aerospace Alloys Mohammad Antar, Dimitrios Chantzis Gediminas Račiukaitis Júnior, Izabel Fernanda Machado, Álisson Rocha Machado, Rui Vilar Simone Russ Shorter than short: How does the pulse duration The influences of pulse overlap on cut quality 11:15 - Uwe Keller, Lara Bauer, Tilo Meyer, Developments on Laser Drilling in Gas Thomas Beck Tobias Reincke influence the process efficiency and the quality during fiber laser cutting of electrodes for 11:30 Raphael Gebs, Birgit Faisst, Jörg Roller, Turbine Blades Jens Dietrich Stefan Kreling, Klaus Dilger of conductive materials? Lithium-ion batteries Benjamin Führa

Konstantin Hofmann Laser micro structuring using adaptive mirror Marco Smarra Development of a wire based laser alloying 11:30 - Matthias Holzer, Stefan Lutz, Steffen Basic imaging and modelling analysis of the Ramiz .S. Matti for extra-cavity beam-shaping of high-power Johannes Neyer, Klaus Dickmann, Jean process for highly stressed surfaces of hot forming 11:45 Schmitt, Vincent Mann, Florian Hugger, processing front in laser remote fusion cutting Alexander F.H. Kaplan ultra-short laser pulses Pierre Bergmann steel tools Stephan Roth, Michael Schmidt

Annika Richmann Temporally and spatially resolved measurement Oliver Bocksrocker 11:45 - Cutting diamond tools using the Laser Inner walls laser cladding of WC reinforced Josu Leunda Sébastien Kurzen, Benjamin Carron, of the cut front geometry while cutting with a Tim Hesse, Peter Berger, Meiko Boley, 12:00 MicroJet® technology on a 5 axis machine Ni coatings Carlos Soriano, Carmen Sanz Bernold Richerzhagen solid-state laser Thomas Graf

Lunch Lunch Lunch

Program subject to change without notice Update 02.06.2015 LiM2015 Advance Program, Wednesday, 24.6.2015 LiM2015 Advance Program, Wednesday, 24.6.2015 LiM2015 Advance Program, Wednesday, 24.6.2015

Room "Edison", 1st Floor, Exhibition Hall A2 (A21/A22) Room "Newton 2", 1st Floor, Exhibition Hall A3 (A32) Room "Newton 1", 1st Floor, Exhibition Hall A3 (A31) Micro Processing: Ablation, Drilling and Micro-Cutting (We_A2_3), Chair C. Esen Macro Processing: Surface Treatment and Cladding (We_A32_3), Chair K. Partes Macro Processing: Cutting (We_A31_3), Chair L.D. Scintilla

Sensors, modelling, real time process control Benedikt Adelmann 14:00 - Influence of coaxial cw laser heating on Christian Fornaroli Optical cutting tear detection system for and monitoring of laser cladding Pascal Aubry Benedikt Neumeier, Max Schleier, Eugen 14:15 the ablation of silicon with ultra-fast lasers Arnold Gillner industrial fiber laser based cutting machines (Invited) Wilmann, Ralf Hellmann

Wagner de Rossi 14:15 - Effects of ultrashort laser ablation in copper Modeling of Transport Phenomena in Metal Karim Kheloufi Denilson de Camargo Mirim, Nilson Dias 14:30 and stainless steel Fusion Cutting Using High Power Laser El Hachemi Amara Vieira Júnior, Ricardo Elgul Samad

Guijun Bi Cindy Goppold 14:30 - Direct Laser Beam Interference Patterning Simonas Indrisiunas Deposition of Corrosion Resistant Alloy on to Low Hui-chi Chen, Bing Yang Lee, Beng Siong Dynamic beam shaping for laser fusion cutting Thomas Pinder, Patrick Herwig, Achim 14:45 for Fabrication of Plasmonic Hole Arrays Bogdan Voisiat, Gediminas Raciukaitis Alloyed Steel using LAAM for Oil & Gas Applications Lim Mahrle, Andreas Wetzig, Eckhard Beyer

Temporal evolution of hole-geometry and Chao He High speed micro cladding using a high-power Martin Erler 14:45 - Flow diagnostice produced by SLM laser Stefan Ulrich influences of energy deposition during ultra- Claudia Hartmann, Christian Fornaroli, single-mode continuous-wave fiber laser and Robby Ebert, Stefan Gronau, Matthias 15:00 cutting nozzles Simon Jahn, Sabine Sändig, Burkhardt Fleck short pulses helical drilling Frank Zibner, Arnold Gillner a polygon scanning system Horn, Sachsa Klötzer, Horst Exner

Karolis Ratautas Yasuhiro Okamoto Mindaugas Gedvilas, Ina Stankevičienė, 15:00 - Kiichi Asako, Akira OKADA, Shogo Minagi, Selective Copper Plating on Polymers Induced Innovative distance control for laser cutting Guilherme Mallmann Laser Micro-drilling of Multi-layered Artificial Skin Aldona Jagminienė, Eugenijus Norkus, 15:15 Naoto Maeda, Qiuyue Pan, Keiji Jin, Goro by Laser Activated Fillers based on inline low coherence interferometry Robert Schmitt, Timo Kosanke Nello Li Pira, Stefano Sinopoli, Umberto Nishigawa Emanuele, Gediminas Račiukaitis Carmine Signorile Daniel Johannes Förster 15:15 - Energy transfer mechanisms during laser Free-form fabrication of steel parts by multi- Sabina Luisa Campanelli, Andrea Areas of application for TEA CO2-Laser Stefan Veenaas Volkher Onuseit, Rudolf Weber, Thomas 15:30 pulsed processing of metals layer laser cladding Angelastro, Giuseppe Casalino, Antonio induced shock waves Frank Vollertsen Graf Domenico Ludovico

Coffee break Coffee break Coffee break

Micro Processing: Ablation, Drilling and Micro-Cutting (We_A2_4), Chair Y. Okamoto Macro Processing: Surface Treatment and Cladding (We_A32_4), Chair K. Partes Macro Processing: Process Monitoring and Control (We_A31_4), Chair S. Katayama Valeriy M. Levshakov Hamza Messaoudi 16:00 - Highly reproducible laser micro drilling of Industrial Laser Technologies for Shipbuilding Aleksandr N. Aleshkin, Natalia A. Use of inline coherent imaging for laser Thibault Bautze Salar Mehrafsun, Geza Schrauf, Frank 16:15 titanium-based HLFC sections (Invited) Steshenkova, Gleb A. Turichin, Nikolay A. welding processes: Process control and beyond Markus Kogel-Hollacher Vollertsen Nosyrev

Calculating the optimal combination of pulse- 16:15 - Matthias Domke Friedhelm Dorsch to-pulse distance and fluence for scribing and Seam tracking for fillet welds with scanner optics 16:30 Giovanni Piredda Holger Braun, Dieter Pfitzner patterning with ultrashort pulsed lasers

Laser direct metal deposition for alloy Javier Montero 16:30 - Huanzhen Zhang development: use of nominal composition alloy Using optical measuring techniques to investigate Nasim Bakir Laser ablation of SiCp/Al composite Maria Jose Tobar, Jose Manuel Amado, Eva 16:45 Ting Huang, Rongshi Xiao powder as compared to mixed powder feeding the hot cracking susceptibility of laser welded joints Andrey Gumenyuk, Michael Rethmeier Díaz, Armando Yáñez with matched composition

sami Ibrahim Al-rubaiey 16:45 - Computational Study on the Effect of the Stefan Tatra Effect of Sensitization on Pitting Corrosion How fast is fast enough in the monitoring Felix Tenner Mohammed Jasim Kadhim Al-Tameemi, 17:00 Pulse Length on Laser Ablation Processes Rodrigo Gómez Vázquez, Andreas Otto Resistance of Laser Melting 304 Stainless Steel and controlling of laser welding? Florian Klämpfl, Michael Schmidt Zaman abdualrazaq abdualwahab

Daichi Tanigawa Scaling of ablation rates. Ablation efficiency and 17:00 - Marc Sailer Influence of particle size on heat affected zone Nobuyuki Abe, Masahiro Tsukamoto, Autocorrelation analysis of plasma plume Libor Mrňa quality aspects of “Burstmode”-micromachining 17:15 Jonas Kleiner, Myriam Kaiser, Simone Russ in laser cladding Yoshihiko Hayashi, Hiroyuki Yamazaki, oscillations in deep penetration laser welding Martin Šarbort of metals. Yoshihiro Tatsumi, Mikio Yoneyama

Analysis of shape geometry of Ti6Al4V Sabina Luisa Campanelli On the detection of defects and of 17:15 - Analysis and optimization of process parameters parts fabricated by nanosecond laser Nicola Contuzzi, Fulvio Lavecchia, Gianluca Ainhoa Riquelme Aguado incorrect actuator settings in laser Ralph Hohenstein 17:30 in Al-SiCp laser cladding ablation Percoco machining

Crater shape dependence on pulse duration in Strategies for high deposition rate 17:30 - crystalline silicon generated using an IR Stefano Buratin Antonio Candel Ruiz additive manufacturing by Laser Metal 17:45 Gaussian laser beam: from femtosecond to Carol Kong Oliver Müllerschön, Simon Abt Deposition microsecond regime

Program subject to change without notice Update 02.06.2015 LiM2015 Advance Program, Thursday, 25.6.2015 LiM2015 Advance Program, Thursday, 25.6.2015 LiM2015 Advance Program, Thursday, 25.6.2015

Room "Edison", 1st Floor, Exhibition Hall A2 (A21/A22) Room "Newton 2", 1st Floor, Exhibition Hall A3 (A32) Room "Newton 1", 1st Floor, Exhibition Hall A3 (A31) Micro Processing: Ablation, Drilling and Micro-Cutting (Th_A2_1), Chair A. Gillner Macro Processing: Additive Manufacturing (Th_A32_1), Chair D. Drummer Macro Processing: System Technology (Th_A31_1), Chair A. Fuchs

08:30 - Nanoparticles fabricated by laser ablation in Hybrid lightweight design by laser additive Frank Beckmann Laser Fumes at fs Laser Processes – Stephan Barcikowski Stefan Jakschik 08:45 liquids for biomedical and energy applications manufacturing and laser welding processes Claus Emmelmann Product, Process and Environment Considerations

Michael Cornelius Hermann Karg Juan Pou Effect of process conditions on mechanical Bhrigu Ahuja, Adam Schaub, Jochen 08:45 - Production of silver nanoparticles in liquid by Mohamed Boutinguiza, Rafael Comesaña, behavior of Aluminium Wrought Alloy EN Peter Hoffmann Schmidt, Marius Sachs, Alexander Mahr, System Technology for High Speed Laser Welding 09:00 CW and pulsed lasers Fernando Lusquiños, Antonio Riveiro, Jesús AW-2618 additively manufactured by Laser Beam Bernd Pögel, Roland Dierken Sebastian Wiesenmayer, Leon Wigner, Karl- del Val Melting in powder bed Ernst Wirth, Wolfgang Peukert, Marion Felix Quintero Martinez Joaquin Penide Duran, Antonio Riveiro Nesma T. Aboulkhair Volker Rominger 09:00 - Bioactive glass nanofibers produced by The role of powder properties on the process- Rodriguez, Jesus del Val Garcia, Rafael Ian Maskery, Ian Ashcroft, Chris Tuck, Latest trends in high power disk laser technology Marco Holzer, Matthias Koitzsch, Tracey 09:15 Laser Spinning for biomedical applications ability of Aluminium alloys in selective laser melting Comesaña Piñeiro, Fernando Lusquiños Nicola M. Everitt Ryba Rodríguez, Juan Pou Saracho Elena Krehova Alexander Kanitz Hydrodynamic instabilities and ablation Creation of system for studying of optical materials Alexander Ignatov, Vasily Kurakin, Anatoliy 09:15 - Femtosecond laser ablation in liquids of iron- Jan Hoppius, M'Barek Chakif, Evgeny phenomena under the laser melting of Yuri Chivel and coatings for their damage threshold, Pozdnyakov, Yuri Kalinin, Boris Krayev, 09:30 based nanoparticles Gurevich, Andreas Ostendorf powder layers mastering of measuring methodic. Andrey Skrynnik, Michael Filipov, Vladimir Serebryakov

Formation of a periodically distributed inverted Airidas Žukauskas Influence of local dependencies in additive Kai Schimanski Thomas Schmidt 09:30 - pyramid structure on silicon using direct laser Bogdan Voisiat, Martynas Gavutis, layered manufacturing on serial process design for Daniel Tolksdorf, Thorsten Schroeder, Laser joining of glass and metal Benjamin Kipker, Ronny Bauer, Daniel 09:45 interference ablation and surface etching processes Gediminas Račiukaitis aerospace applications Bernhard Bahlmann Eilenberger, Sabine Sändig

Direct laser patterning as alternative method Bogdan Voisiat Thomas Stichel 09:45 - Selective deposition of polymer powder Identification of process phenomena in DMLS Robert Domröse for production of THz components and Aidas Petryla, Gediminas Račiukaitis, Tobias Laumer, Philipp Amend, Stephan 10:00 by vibrating nozzles for laser beam melting by optical in-process monitoring. Thomas Grünberger plasmonic structures Irmantas Kašalynas, Linas Minkevičius Roth

Coffee break Coffee break Coffee break

Micro Processing: Ablation, Drilling and Micro-Cutting (Th_A2_2), Chair W. de Rossi Macro Processing: Additive Manufacturing (Th_A32_2), Chair D. Drummer Macro Processing: System Technology (Th_A31_2), Chair A. Fuchs

Additive Manufacturing – an introduction to the New Approaches for seam tracked laser 10:30 - Evaluation of picosecond laser induced shunt Edgaras Markauskas Daniel Reitemeyer activities of Collaborative Research Center CRC 814 Dietmar Drummer beam brazing and welding 10:45 resistance in CIGS thin-film solar cells Paulius Gečys, Gediminas Račiukaitis Stefan Liebl, Florian Albert (Invited) (Invited)

Picosecond laser modification of thin-film CIGS 10:45 - Andius Žemaitis solar cell absorber layer for P2 micro-welding 11:00 Paulius Gečys, Gediminas Račiukaitis process

Niels Schilling Application of CO2 laser for 3D printing Statistical distributions of the protection time of 11:00 - Material modification of reinforcing glass Florian Peter Lugauer Benjamin Krupop, Udo Klotzbach, Scott utilizing thermal assisted polymerization of PVC Mohammadreza Riahi Dehkordi passive laser safety barriers – Normal 11:15 fibers through pulsed laser radiation Florian Moosbauer, Michael Friedrich Zäh White, Raj Patel plastic distribution or is there a better description?

Felipe Arias-González Adrian Hugh Alexander Lutey Jesús del Val, Rafael Comesaña, Joaquín Development and integration of an adaptive Georg Cerwenka 11:15 - Laser Processing of Lithium Iron Phosphate Additive manufacturing based on laser cladding Alessandro Fortunato, Maurizio Fiorini, Penide, Fernando Lusquiños, Félix Quintero, focus position control system for a new high- PD Dr.-Ing. habil. Jörg Wollnack, Prof. Dr.- 11:30 Battery Electrodes of cp-Ti for dental implants Simone Carmignato, Alessandro Ascari Antonio Riveiro, Mohamed Boutinguiza, Juan performance laser remote welding head Ing. Claus Emmelmann Pou

Ehsan Zahedi Benjamin Graf Sub-100µs latency feedback control of laser Ethan Jenkins 11:30 - Fabrication of microchannels by picosecond Additive process chain using selective laser Daniel Förster, Volkher Onuseit, Rudolf Michael Schuch, Robert Kersting, Andrey machining using FPGA-powered inline Cole Van Vlack, Paul J. L. Webster, James 11:45 laser pulses spatially shaped with cylindrical lens melting and laser metal deposition Weber, Thomas Graf Gumenyuk, Michael Rethmeier coherent imaging M. Fraser

Joaquín Penide Félix Quintero, Felipe Arias-González, Susanne Dröscher 11:45 - Experimental study on laser marking of alumina Antonio Fernández, Jesús del Val, Rafael Reinventing thermal laser power measurements Michele Zahner, Etienne Schwyter, Thomas 12:00 Comesaña, Antonio Riveiro, Fernando Helbling Lusquiños, Juan Pou Lunch Lunch Lunch

Program subject to change without notice Update 02.06.2015 LiM2015 Advance Program, Thursday, 25.6.2015 LiM2015 Advance Program, Thursday, 25.6.2015 LiM2015 Advance Program, Thursday, 25.6.2015

Room "Edison", 1st Floor, Exhibition Hall A2 (A21/A22) Room "Newton 2", 1st Floor, Exhibition Hall A3 (A32) Room "Newton 1", 1st Floor, Exhibition Hall A3 (A31) Micro Processing: Ablation, Drilling and Micro-Cutting (Th_A2_3), Chair S. Barcikowski Macro Processing: Additive Manufacturing (Th_A32_3), Chair M. Karg (Th_A31_3),

Jan Stefan Hoppius Experimental and theoretical study of 14:00 - On line evaluation of femtosecond laser Andrey V. Gusarov Alexander Kanitz, Benjamin Schöps, Evgeny residual deformations and stresses at 14:15 ablation efficiency on copper structures Victor Saphronov Gurevich, Andreas Ostendorf additive manufacturing by fusion

Reducing the roughness of the kerf for brass Yixin Bai Influence of process parameters on Fangyong Niu 14:15 - sheet cutting with the Laser MicroJet® by a Annika Richmann, Jamie Paik, Bernold deposition dimensions in laser engineered net Guangyi Ma, Dongsheng Chai, Siyu Zhou, 14:30 systematic parameter study Richerzhagen shaping Dongjiang Wu

Torsten Petrat 14:30 - Build-up strategies for generating components 3D laser micro-machining for targets manufacturing Remy Bourdenet Benjamin Graf, Andrey Gumenyuk, Michael 14:45 of cylindrical shape with Laser Metal Deposition Rethmeier

Giovanni Piredda Influence of temperature gradients on the part Tobias Laumer 14:45 - Mechanical properties of ultrafast-laser Rein Andreas, Johann Zehetner, Victor properties for the simultaneous laser beam Thomas Stichel, Philipp Amend, Michael 15:00 cut polylactic acid films Matylitsky melting of polymers Schmidt

Mikel Gomez-Aranzadi Effect of the pulse duration on the surface Laser sintering of silver filled conductive Bernd Niese 15:00 - Antonio Dias, Miguel Martinez-Calderon, roughness and the heat affected zone in laser adhesive for generation of embedded electronic Philipp Amend, Uwe Urmoneit, Stephan 15:15 Ainara Rodriguez, Santiago Miguel micro polishing processes circuits in stereolithography parts Roth, Michael Schmidt Olaizola

Scanned Mask Imaging: The economical 15:15 - David Milne Reliable Beam Positioning for Metal-based Christiane Thiel approach to high resolution micro-machining 15:30 Zoe Knill Additive Manufacturing by Means of Focal Shift Martin Stubenvoll, Bernd Schäfer, Toni Krol using UV solid state lasers Reduction

Coffee break Coffee break Coffee break

Micro Processing: Surface Functionalization (Th_A2_4), Chair S. Marzenell Macro Processing: Additive Manufacturing (Th_A32_4), Chair B. Ahuja (Th_A31_4),

Improving a Finite Element thermal simulation Hybridization of semiconductor micro particles Marcus Lau 16:00 - of the nanosecond laser ablation on silicon Germano Galasso with plasmonic nanoparticles during additive Ralf Niemann, Mathias Bartsch, William 16:15 targets manufacturing O'Neill, Stephan Barcikowski

Sina Hallmann Simulation of the effect of different laser Tim Marten Wischeropp 16:15 - Improvement of the adhesion between CoCr René Nodop, Christian Daniel, Martin beam intensity profiles on the productivity of Raul Salazar, Dirk Herzog, Claus 16:30 and dental ceramics by laser surface structuring Weppler, Jügen Geis-Gerstorfer, Claus the Selective Laser Melting process Emmelmann Emmelmann

Pulsed Laser Surface Pre-Treatment of Some optimization strategies for tool Angel Rodríguez 16:30 - Andre Heckert Aluminium to Join Aluminium-Thermoplastic path generation in 3D laser metal Maria Jose Tobar, Jose Manuel Amado, 16:45 Christian Singer, Michael F. Zaeh Hybrid Parts deposition Javier Montero, Armando Yáñez

Nerea Otero David Munoz-Martin 16:45 - Surface conditioning of copper to improve Laser printing and curing/sintering of silver Pablo Romero, Christian Hoff, Jörg Chen Yu, Andres Márquez, Miguel Morales, 17:00 the continuous wave laser micro welding paste lines for solar cell metallization Hermsdorf Carlos Molpeceres

Femtosecond laser manufacturing of highly Miguel Martínez-Calderon Tobias Kamps 17:00 - TRIZ-based Biomimetic Part Design for hydrophobic hierarchical structures fabricated Ainara Rodríguez, Antonio Dias, Mikel Christopher Muenzberg, Lukas Stacheder, 17:15 Laser Additive Manufacturing by combining surface microstructures and LIPSS Gómez-Aranzadi, Santiago Miguel Olaizola Reinhart Gunther, Udo Lindemann

17:15 - Comparison of UV- to M-IR laser for surface David Blass 17:30 pre-treatment based on the ILSS-test Stefan Kreling, Klaus Dilger

17:30 - 17:45

Program subject to change without notice Update 02.06.2015 LiM2015 Advance Program, Tuesday, 23.6.2015 Joint Sessions with ECLEO LiM2015 Advance Program, Tuesday, 23.6.2015

ICM 1st Floor, Room 13a, Joint Session with ECLEO ICM 1st Floor, Room 13a, Tech Focus Sessions with ECLEO JSL: Diagnostics and Control (only Invited) (Tu_13a_1), Chair L. Overmeyer TFI: Ultrafast Solid-State and Fibre Lasers (only Invited) (Tu_13a_3), Chair L. Overmeyer

Laser Process Monitoring and Control of Real Micromachining and Materials Processing with High 08:30 - 14:00 - Process Features Stefan Kaierle Energy Ultrafast Fiber Lasers Tim Gerke 09:00 14:30 (Invited) (Invited)

Control of Femtosecond Pulsed Laser Deposition by 09:00 - 14:30 - Mid IR Fiber Frequency Combs and Applications Temporal Pulse Shaping Florence Garrelie Martin Fermann 09:30 15:00 (Invited) (Invited)

Ship-in-a-bottle Fabrication of Functional Biochips Industrial Ultrafast Lasers for Advanced 09:30 - 15:00 - by Hybrid Femtosecond Laser Processing Koji Sugioka Manufacturing Applications Eric Mottay 10:00 15:30 (Invited) (Invited)

Coffee break Coffee break TFII: Materials Structuring Using Short Laser Pulses (only Invited) (Tu_13a_4), Chair L. Overmeyer

16:00 - Surface functionalization Rainer Kling 16:30

Ultrafast Burst-Mode Fiber Lasers: Source 16:30 - Development and Material Processing F. Oemer Ilday 17:00 (Invited)

Additive and Subtractive 3D-Microfabrication of 17:00 - Micro/Nanostructures Yongfeng Lu 17:30 (Invited)

Program subject to change without notice Update 02.06.2015