DOCSLIB.ORG

Equipment Profiles Global Communications, Computer & Consumer Electronics

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Equipment Profiles Global Communications, Computer & Consumer Electronics Equipment Profiles Global Communications, Computer & Consumer Electronics Equipment Profiles Table of Contents Need more information? Servers (Entry Level). 3 Call Technical Support at Servers . 4 the numbers listed below. Workstations . 5 Technical Support is staffed Storage . 6 with specialists well versed in all Tyco Electronics Notebook . 7 products. They can Desktop . 8 provide you with: Switch (Rack) . 9 I Technical support Switch (Stackable). 10 I Catalogs Base Station . 11 I Technical Documents NIC Card . 12 I Product Samples Set Top Box . 13 I Tyco Electronics Mobile Phone . 14 Authorized Distributor Locations Digital Still Camera . 15 Digital Video Camera . 16 PDP/LCD TV . 17 Business Machine . 18 PDA . 19 DVD . 20 Game Console . 21 Website Information. 22 Contact Information . 23 Disclaimer While Tyco Electronics Corporation and its affiliates referenced herein (“Tyco Electronics”) have made every reason- able effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, includ- ing, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics’ only obligations are those in the Tyco Electronics Standard Terms and Conditions of Sale, and in no case will Tyco Electronics be responsible for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products. Users should independently evaluate the suitability of, and test each product for, their applica- tion. The dimensions, specifications, designs, construction, materials and processes in this catalog are for reference pur- poses only and are subject to change without notice. Please consult Tyco Electronics for the most current product information. The export of certain Tyco Electronics products is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401 et seq.). Orders may be subject to export approval by the U.S. Government. Buyer must comply with all applicable export laws of all applicable jurisdictions. 2 Catalog 1654952 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 08-05 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 Germany: 49-6251-133-0 Equipment Profiles Servers (Entry Level) VRM/Power Pods I VRM I SEC-II I Mini CROWN EDGE Connectors Memory Sockets I DIMM (SD RAM) I RIMM (184 pos. RAMBUS) I DDR (184 pos.) I DDR II (240 pos.) I Custom Modules I/O (Copper) I SCSI II/III I AMPLIMITE .050 Connector I CHAMP Connector I Ethernet Modular Jack I Integrated Magnetic Jacks I/O (Fiberoptic) I IEEE 1394 I Fibre Channel I Fibre Channel I PARA-OPTIX Cable I HSSDC (GBIC or fixed) Assembies I HSSDC2 (SFP or fixed) I Connectors & Adapters I AMPLIMITE 9 pos. Rcpt. I Cable Assemblies Connector (SC, LC, MT-RJ, MPO) RF Coax Product Storage I InfiniBand Cable Assembies I Cable Assemblies I BNC I Fibre Channel I 1X HSSDC 2 I SMA/SMB I SCA 2 (40 pos.) I 4X/12X CPU Sockets I SCSI I XFP/XPAK Other I Micro PGA I SCA 2 (80 pos.) I Cable Assemblies I PGA I IDENTO Labels B I Serial ATA (SATA) I MRJ21 Connector I Slot 1 & Slot 2 I Ultra ATA I SFP Cages I Serial Attached SCSI (SAS) I Single Port Thermal Management Mezzanine/Stacking I SAS I Ganged (1x2, 1x4, 1x6) I MICTOR & MICTOR SB I CPU (Folded fin) I Stacked (2x1, 2x4, 2x6) Connector I CHIP COOLERS Heat Sink Power (Board-to-Board) Power I AMPMODU 50/50 Connector I I/O I Multi-Beam XL (SSI Std.) (Cable-to-Cable/Board) I Free Height (FH) I Air Management Connector I HXC125 I SILFIL Elastomeric I Crimp Twin Leaf (SSI Std.) I AMP-DUAC (SSI Std.) Connector I STEP-Z Connector Conductive Silicones I FLATPAQ Connectors I Universal MATE-N-LOK II I MINIPAK Connectors I Z-PACK 2mm HM Connector Connector I CROWN EDGE Connectors I STAX Elastomeric Bd-Bd I ELCON Drawer Series Connector I MicroPower Products I STAX Array Connector I Multi-Beam XL (SSI Std.) Connector I Crimp-Snap Twinleaf (SSI Std.) 3 Catalog 1654952 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 08-05 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 Germany: 49-6251-133-0 Equipment Profiles Servers Backplane Systems I/O (Copper) I LIGHTRAY MPX (Optical) I SCSI II/III System Interconnects I AMPLIMITE .050 I InfiniBand Connector I Advanced TCA I CHAMP Connector I ATCA Power I Ethernet Module Jack I Intel Reference Design I Integrated Magnetic Jacks I Z-PACK HM-Zd Connector I Integrated Magnetic Jacks PoE (RJ45) I MultiGig RT Connector I IEEE 1394 I Z-PACK HS3 Connector I Fibre Channel I SEC Z Connector I HSSDC (GBIC or fixed) I PCI (Host Adaptor Cards), PCI-E I HSSDC2 (SFP or fixed) I Tyco Electronics I AMPLIMITE 9 pos. Rcpt. Printed Circuit Group Connector I InfiniBand Power (Board-to-Board) I 1X HSSDC 2 I Multi-Beam XL (SSI Std.) I 4X/12X Connector I XFP/XPAK I Crimp Twin Leaf (SSI Std.) I Cable Assemblies I/O (Fiberoptic) CPU Sockets I FLATPAQ Connectors I SFP Cages I MINIPAK Connectors I Fibre Channel I Micro PGA I Single Port I AMPOWER Wave Crimp I PARA-OPTIX Cable I PGA I Ganged Assemblies Connector I Slot 1 & Slot 2 I Stacked I Connectors & Adapters I ELCON Iccon Connector I MCLGA I MRJ 21 Connector I Cable Assemblies I CROWN EDGE Connector I HXC125 (SC, LC, MT-RJ, MPO) I Universal Power Module Thermal Management I Rugged and High Density – VRM/Power Pods LuxCis®, Mini Expanded Power I CPU (Folded fin) Beam I SEC-II Power (Cable-to-Cable/Board) I CHIP COOLERS Heat Sink I LIGHTRAY MPX to I/O I Mini CROWN EDGE I AMP-DUAC Connector I I/O (Optic) System Connector Interconnects I Universal MATE-N-LOK II I Air Management I Itanium Power Connector Connector I SILFIL Elastomeric I Montecito VR372 Power Storage I Metrimate Connector Conductive Silicones Connector I AMPOWER Multi Pin Plus I Fibre Channel Connector RF Coax I SCA 2 (40 pos.) Mezzanine/Stacking I AMPOWER Wave Crimp I BNC I Serial Attached SCSI I MICTOR & MICTOR SB Connector I SMA/SMB I SCA 2 (80 pos.) Connector I Louvertac Upgrade Contacts I SAS I AMPMODU 50/50 Connector I Mini Power Drawer Memory Sockets I Serial ATA I Free Height (FH) I ELCON Drawer Series I DIMM (SD RAM) I HXC125 Coplanar I RIMM (184 pos. RAMBUS) I STEP-Z Connector Expansion Slots I Z-PACK HM-Zd Connector I DDR (184 pos.) I STAX Elastomeric Bd-Bd I PCI I Z-DOK Connector Connector I DDR II (240 pos.) I PCI-X I Custom Modules I MICTOR Connector I STAX Elastomeric Array I PCI-E I HM Connector I PCI-E siom I FLAT MOECPCoplanar Lurcis is a trademark of Radiall Jerrik, Inc. 4 Catalog 1654952 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 08-05 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 Germany: 49-6251-133-0 Equipment Profiles Workstations Memory Sockets I DIMM (SD RAM) I RIMM (184 pos. RAMBUS) I DDR (184 pos.) I DDR II (240 pos.) I Custom Modules Power (Cable-to-Cable/Board) I AMP-DUAC PL, 4-2mm PE Connector I Universal MATE-N-LOK II Connector I ELCON Drawer Series I MicroPower Products I CROWN EDGE Connector Power (Board-to-Board) I Multi-Beam XL (SSI Std.) Connector I FLATPAQ Connectors I MINIPAK Connectors I ICCON Connector I CROWN EDGE Connector VRM/Power Pods CPU Sockets Mezzanine/Stacking I Sec-II Power I Micro PGA I MICTOR & MICTOR SB I Mini CROWN EDGE Connector I PGA I AMPMODU 50/50 Connector Thermal Management I Slot 1 & Slot 2 I Free Height (FH) I CPU (Folded fin) Storage I HXC125 I CHIP COOLERS Heat Sink I Fibre Channel I STEP-Z Connector I I/O I SCA 2 (40 pos.) I STAX Elastomeric Bd-Bd I Air Management Connector I SCSI I STAX Elastomeric Array Expansion Slots I SCA 2 (80 pos.) Connector I Serial ATA I PCI I/O (Copper) I PCI-X Coplanar I PCI-E I Ethernet Modular Jack I FLAT MOE Connector I Monitor Cable RF Coax I AC Power Cord I BNC I MCX I Coax Cable Assemblies 5 Catalog 1654952 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514 Revised 08-05 and inches unless otherwise reference purposes only.
Load more

Recommended publications
  • Interconnect Solutions Short Form Catalog
    Interconnect Solutions Short Form Catalog How to Search this Catalog This digital catalog provides you with three quick ways to find the products and information you are looking for. Just point and click on the bookmarks to the left, the linked images on the next page or the labeled sections of the table of contents. You can also use the “search” function built into Adobe Acrobat to jump directly to any text reference in this document. Acrobat “Search” function instructions: 1. Press CONTROL + F 2. When the dialog box appears, type in the word or words you are looking for and press ENTER. 3. Depending on your version of Acrobat, it will either take you directly to the first instance found, or display a list of pages where the text can be found. In the latter, click on the link to the pages provided. Interconnect Solutions Short Form Catalog Complete Solutions for the Electronics Industry 3M Electronics offers a comprehensive range of Interconnect Solutions for the electronics industry with a product portfolio that includes connectors, cables, cable assemblies and assembly tooling for a wide variety of applications. 3M is dedicated to innovation, continually developing new products that become an important part of everyday life across many diverse markets. A number of 3M solution categories are based on custom-designed products for specialized applications. 3M Electronics can help you design, modify and customize your product as well as help you to seamlessly integrate our products into your manufacturing process on a global basis. RoHS Compliant Statement “RoHS compliant” means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium.
    [Show full text]
  • Publication Title 1-1962
    publication_title print_identifier online_identifier publisher_name date_monograph_published_print 1-1962 - AIEE General Principles Upon Which Temperature 978-1-5044-0149-4 IEEE 1962 Limits Are Based in the rating of Electric Equipment 1-1969 - IEEE General Priniciples for Temperature Limits in the 978-1-5044-0150-0 IEEE 1968 Rating of Electric Equipment 1-1986 - IEEE Standard General Principles for Temperature Limits in the Rating of Electric Equipment and for the 978-0-7381-2985-3 IEEE 1986 Evaluation of Electrical Insulation 1-2000 - IEEE Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and 978-0-7381-2717-0 IEEE 2001 for the Evaluation of Electrical Insulation 100-2000 - The Authoritative Dictionary of IEEE Standards 978-0-7381-2601-2 IEEE 2000 Terms, Seventh Edition 1000-1987 - An American National Standard IEEE Standard for 0-7381-4593-9 IEEE 1988 Mechanical Core Specifications for Microcomputers 1000-1987 - IEEE Standard for an 8-Bit Backplane Interface: 978-0-7381-2756-9 IEEE 1988 STEbus 1001-1988 - IEEE Guide for Interfacing Dispersed Storage and 0-7381-4134-8 IEEE 1989 Generation Facilities With Electric Utility Systems 1002-1987 - IEEE Standard Taxonomy for Software Engineering 0-7381-0399-3 IEEE 1987 Standards 1003.0-1995 - Guide to the POSIX(R) Open System 978-0-7381-3138-2 IEEE 1994 Environment (OSE) 1003.1, 2004 Edition - IEEE Standard for Information Technology - Portable Operating System Interface (POSIX(R)) - 978-0-7381-4040-7 IEEE 2004 Base Definitions 1003.1, 2013
    [Show full text]
  • Opening Plenary March 2021
    Opening Plenary March 2021 Glenn Parsons – IEEE 802.1 WG Chair [email protected] 802.1 plenary agenda Monday, March 8th opening Tuesday, March 16th closing • Copyright Policy • Copyright Policy • Call for Patents • Call for Patents • Participant behavior • Participant behavior • Administrative • Membership status • Membership status • Future Sessions • Future Sessions • Sanity check – current projects • 802 EC report • TG reports • Sanity check – current projects • Outgoing Liaisons • Incoming Liaisons • Motions for EC • TG agendas • Motions for 802.1 • Any other business • Any other business 2 INSTRUCTIONS FOR CHAIRS OF STANDARDS DEVELOPMENT ACTIVITIES At the beginning of each standards development meeting the chair or a designee is to: .Show the following slides (or provide them beforehand) .Advise the standards development group participants that: .IEEE SA’s copyright policy is described in Clause 7 of the IEEE SA Standards Board Bylaws and Clause 6.1 of the IEEE SA Standards Board Operations Manual; .Any material submitted during standards development, whether verbal, recorded, or in written form, is a Contribution and shall comply with the IEEE SA Copyright Policy; .Instruct the Secretary to record in the minutes of the relevant meeting: .That the foregoing information was provided and that the copyright slides were shown (or provided beforehand). .Ask participants to register attendance in IMAT: https://imat.ieee.org 3 IEEE SA COPYRIGHT POLICY By participating in this activity, you agree to comply with the IEEE Code of Ethics, all applicable laws, and all IEEE policies and procedures including, but not limited to, the IEEE SA Copyright Policy. .Previously Published material (copyright assertion indicated) shall not be presented/submitted to the Working Group nor incorporated into a Working Group draft unless permission is granted.
    [Show full text]
  • Architectural Support for Real-Time Computing Using Generalized Rate Monotonic Theory
    744 計 測 と 制 御 シ テ ア Vol.31, No.7 集 ル タ イ ム 分 ス ム 特 リ 散 (1992年7月) ≪展 望 ≫ Architectural Support for Real-Time Computing using Generalized Rate Monotonic Theory Lui SHA* and Shirish S. SATHAYE** Abstract The rate monotonic theory and its generalizations have been adopted by national high tech- nology projects such as the Space Station and has recently been supported by major open stand- ards such as the IEEE Futurebus+ and POSIX. 4. In this paper, we focus on the architectural support necessary for scheduling activities using the generalized rate monotonic theory. We briefly review the theory and provide an application example. Finally we describe the architec- tural requirements for the use of the theory. Key Words: Real-Time Scheduling, Distributed Real-Time System, Rate Monotonic scheduling ● Stability under transient overload. When the 1. Introduction system is overloaded by events and it is im- Real-time computing systems are critical to an possible to meet all the deadlines, we must industrialized nation's technological infrastructure. still guarantee the deadines of selected critical Modern telecommunication systems, factories, de- tasks. fense systems, aircrafts and airports, space stations Generalized rate monotonic scheduling (GRMS) and high energy physics experiments cannot op- theory allows system developers to meet the erate .without them. In real-time applications, above requirements by managing system concur- the correctness of computation depends upon not rency and timing constraints at the level of task- only its results but also the time at which outputs ing and message passing. In essence, this theory are generated.
    [Show full text]
  • Bi-Directional Optical Backplane Bus for General Purpose Multi-Processor B Oard-To-B Oard Optoelectronic Interconnects
    JOURNAL OF LIGHTWAVE TECHNOLOGY, VOL. 13, NO. 6, JUNE 1995 1031 Bi-Directional Optical Backplane Bus for General Purpose Multi-Processor B oard-to-B oard Optoelectronic Interconnects Srikanth Natarajan, Chunhe Zhao, and Ray. T. Chen Absfract- We report for the first time a bidirectional opti- cal backplane bus for a high performance system containing nine multi-chip module (MCM) boards, operating at 632.8 and 1300 nm. The backplane bus reported here employs arrays of multiplexed polymer-based waveguide holograms in conjunction with a waveguiding plate, within which 16 substrate guided waves for 72 (8 x 9) cascaded fanouts, are generated. Data transfer of 1.2 GbUs at 1.3-pm wavelength is demonstrated for a single bus line with 72 cascaded fanouts. Packaging-related issues such as Waveguiding Plate transceiver size and misalignment are embarked upon to provide n a reliable system with a wide bandwidth coverage. Theoretical U hocessor/Memory Board treatment to minimize intensity fluctuations among the nine modules in both directions is further presented and an optimum I High-speed Optoelectronic Transceiver design rule is provided. The backplane bus demonstrated, is for general-purpose and therefore compatible with such IEEE stan- - Waveguide Hologram For Bi-Directional Coupling dardized buses as VMEbus, Futurebus and FASTBUS, and can Fig. 1. Optical equivalent of a section of a single bidirectional electronic function as a backplane bus in existing computing environments. bus line. I. INTRODUCTION needed to preserve the rising and falling edges of the signals HE LIMITATIONS of current computer backplane buses increases. This makes using bulky, expensive, terminated Tstem from their purely electronic interconnects.
    [Show full text]
  • BUS and CACHE MEMORY ORGANIZATIONS for MULTIPROCESSORS By
    BUS AND CACHE MEMORY ORGANIZATIONS FOR MULTIPROCESSORS by Donald Charles Winsor A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy (Electrical Engineering) in The University of Michigan 1989 Doctoral Committee: Associate Professor Trevor N. Mudge, Chairman Professor Daniel E. Atkins Professor John P. Hayes Professor James O. Wilkes ABSTRACT BUS AND CACHE MEMORY ORGANIZATIONS FOR MULTIPROCESSORS by Donald Charles Winsor Chairman: Trevor Mudge The single shared bus multiprocessor has been the most commercially successful multiprocessor system design up to this time, largely because it permits the implementation of efficient hardware mechanisms to enforce cache consistency. Electrical loading problems and restricted bandwidth of the shared bus have been the most limiting factors in these systems. This dissertation presents designs for logical buses constructed from a hierarchy of physical buses that will allow snooping cache protocols to be used without the electrical loading problems that result from attaching all processors to a single bus. A new bus bandwidth model is developed that considers the effects of electrical loading of the bus as a function of the number of processors, allowing optimal bus configurations to be determined. Trace driven simulations show that the performance estimates obtained from this bus model agree closely with the performance that can be expected when running a realistic multiprogramming workload in which each processor runs an independent task. The model is also used with a parallel program workload to investigate its accuracy when the processors do not operate independently. This is found to produce large errors in the mean service time estimate, but still gives reasonably accurate estimates for the bus utilization.
    [Show full text]
  • COVID-19 – Emergency Management Tips and Practices for Bus Transit Systems
    COVID-19 – Emergency Management Tips and Practices for Bus Transit Systems Prepared for: Florida Department of Transportation Office of Freight, Logistics, and Passenger Operations Prepared by: Center for Urban Transportation Research University of South Florida Published: April 1, 2020 Revision: March 10, 2021 Revision: March 10, 2021 Table of Contents List of Figures ..................................................................................................................................................... iii Emergency Management Tips and Practices for Transit .................................................................................... 1 Supplies ........................................................................................................................................................... 1 Hazard Risk Analysis ....................................................................................................................................... 1 Center for Disease Control (CDC) Guidance ................................................................................................... 2 U.S. Department of Transportation’s Federal Transit Administration (FTA) .................................................. 4 Federal Mask Requirement for Surface Transportation Providers ............................................................ 5 Additional Resources .................................................................................................................................. 5 Transportation Research
    [Show full text]
  • 3M Interconnect Short Form Catalog
    3M Interconnect Products Short Form Catalog Comprehensive Solutions for Reliable Connections Complete Solutions for the Electronics Industry 3M Interconnect Solutions offers a comprehensive range of Interconnect Solutions for the electronics industry, with a product portfolio that includes connectors, cables, cable assemblies and assembly tooling for a wide variety of applications. 3M is dedicated to innovation, continually developing new products that become an important part of everyday life across many diverse markets. A number of 3M solution categories are based on custom-designed products for specialized applications. 3M Interconnect Solutions can help you design, modify and customize your product as well as help you seamlessly integrate our products into your manufacturing process on a global basis. Design, modify and customize your product 2 Contents Backplane Connector Solutions 4 Boardmount Connector Solutions 6 Wiremount Connectors and Assembly Solutions 9 Device-to-Board Connector Solutions 13 Input/Output Connector Solutions 16 Cable Solutions 24 Cable Assembly Solutions — High Speed Assemblies 26 3 3M™ BACKPLANE CONNECTOR SOLUTIONS PRODUCT FEATURES MATERIALS PERFORMANCE • RoHS Compliant Version Available Contact Current Rating: 3.0 A @ 30°C DIN Connectors • DIN 41612 Material: Copper Alloy T-rise Above Ambient • C-Form Plug and Socket Insulation Temperature Rating: -55°C to +125°C • C-Form Wiremount Plugs Material: Engineering Thermoplastic and Sockets Flammability UL 94V-0 • R-Form Plug and Socket Plating • Q-Form Plug and
    [Show full text]
  • Shared Memory Communication
    Design and Implementation of a Multi-purpose Cluster System Network Interface Unit by Boon Seong Ang Submitted to the Department of Electrical Engineering and Computer Science in partial fulfillment of the requirements for the degree of Doctor of Philosophy at the MASSACHUSETTS INSTITUTE OF TECHNOLOGY February 1999 © 1999 Massachusetts Institute of Technology. All rights reser MASSACHUS OF TEC Author............. ..... V.. .4....... Department of Electrical Engineerin Ind Computer c February 23, 1999 Certified by................ Arvind Johnson Professor of Computer Science /42 Thesis Supervisor Certified by.. ................. Larry Rudolph Principal Research Scientist Th sis Supervisor Accepted by............ A. C. Smith Chairman, Departmental Committee on Graduate Students Design and Implementation of a Multi-purpose Cluster System Network Interface Unit by Boon Seong Ang Submitted to the Department of Electrical Engineering and Computer Science on February 23, 1999, in partial fulfillment of the requirements for the degree of Doctor of Philosophy Abstract Today, the interface between a high speed network and a high performance com- putation node is the least mature hardware technology in scalable general purpose cluster computing. Currently, the one-interface-fits-all philosophy prevails. This ap- proach performs poorly in some cases because of the complexity of modern memory hierarchy and the wide range of communication sizes and patterns. Today's mes- sage passing NIU's are also unable to utilize the best data transfer and coordination mechanisms due to poor integration into the computation node's memory hierarchy. These shortcomings unnecessarily constrain the performance of cluster systems. Our thesis is that a cluster system NIU should support multiple communica- tion interfaces layered on a virtual message queue substrate in order to streamline data movement both within each node as well as between nodes.
    [Show full text]
  • TIM Specification
    TIM-40 MODULE SPECIFICATION Including TMS320C44 Addendum VERSION 1.12. 1 Table of Contents TABLE OF CONTENTS ............................................................................................................................................................... 2 1.THE MODULE CONCEPT........................................................................................................................................................ 4 1.1 INTRODUCTION.................................................................................................................................................................... 4 1.2 ORIGINS OF THE MODULE..................................................................................................................................................... 4 1.3 MODULE CONCEPT............................................................................................................................................................... 4 1.4 MOTHERBOARD CONCEPT .................................................................................................................................................... 4 1.5 SUMMARY ........................................................................................................................................................................... 4 2. PHYSICAL SPECIFICATIONS ............................................................................................................................................. 5 2.1 INTRODUCTION...................................................................................................................................................................
    [Show full text]
  • NIM Standard E Of1.35Inches(=“Singlewidt (Looking Intobin) Bin Connectorfront Methods
    NIM Standard NIM is an acronym for Nuclear Instrumentation Methods. The NIM standard (DOE/ER-0457) was established in 1964 for the nuclear and high energy physics communities. The goal of NIM was to promote the interchangeability of instrumentation modules. Standard NIM modules are 8.75 inches G. Varner – PHYS476 tall and a width which is a multiple of 1.35 inches (= “single width”; “double width” = 2.7 inches) Example: extended pin set Bin connector front (looking into bin) Module Bin CAMAC Standard CAMAC is also an acronym: Computer Automated Measurement and Control. The CAMAC standard (IEEE 583) was established in 1975 and has been used in virtually every physics laboratory and many industrial applications. While other modular instrumentation standards have been widely adopted, the G. Varner – PHYS476 robust CAMAC module and enclosure construction and simple hardware level interface means CAMAC is still a viable choice for instrument applications today. Separate 24-bit Read/Write Busses Simple FNAD commanding: e.g. F = 0 (read) N = 1 (crate slot) A = card channel # D = data (either) Z = initialize (reset) X = I’m responding Q = zero suppress L = LAM (Look-At-Me) LeCroy 3377 500ps multi-hit TDC FASTBUS Standard FASTBUS is a standard largely exclusive to High Energy Physics. Detailed in ANSI/IEEE 960 and IEC-547, it is designed for VERY high power operation (many kW per crate – from the age of ECL) G. Varner – PHYS476 Hundreds of pins, Impossible to detail here and it is likely you will never need to know this. Mechanics are frightening: bed of nails in back.
    [Show full text]
  • Cache Attacks on ARM
    Moritz Lipp Cache Attacks on ARM Master thesis Graz, University Of Technology NOTICE If you want to cite this work based on last-level cache attacks on ARM, please cite the following research paper instead: •L ipp, Moritz ; Gruss, Daniel ; Spreitzer, Raphael ; Maurice, Clementine´ ;Mangard, Stefan: ARMageddon: Cache Attacks on Mobile De- vices. In: 25th USENIX Security Symposium (USENIX Security 16). Austin, TX : USENIX Association, August 2016. – ISBN 978–1–931971– 32–4, 549–564 If you want to cite this work in respect to rowhammer on ARM-based devices, please cite the following publication instead: •V een, Victor van d. ; Fratantonio, Yanick ; Lindorfer, Martina ; Gruss, Daniel ; Maurice, Clementine´ ; Vigna, Giovanni ; Bos, Her- bert ; Razavi, Kaveh ; Giuffrida, Christiano: Drammer : Determinis- tic Rowhammer Attacks on Commodity Mobile Platforms. In: ACM Conference on Computer and Communications Security – CCS, 2016 Contents 1 Introduction 1 1.1 Motivation . .3 1.2 Key Challenges and Results . .4 1.3 Contributions . .5 1.4 Test devices . .6 1.5 Outline . .7 2 Background 9 2.1 CPU caches . .9 2.2 Cache coherence . 18 2.3 Shared memory . 29 2.4 Cache Attacks . 31 2.5 DRAM . 39 3 Attack primitives 43 3.1 Timing Measurements . 43 3.2 Cache Eviction . 47 3.3 Defeating the Cache-Organization . 53 4 Attack Case Studies 57 4.1 High Performance Covert-Channels . 58 4.2 Spying on User input . 62 4.3 Attacks on Cryptographic Algorithms . 69 4.4 Rowhammer on ARM . 75 5 Countermeasures 79 6 Conclusion 81 i List of tables . 83 List of figures . 86 List of acronyms .
    [Show full text]