Publication Title 1-1962

Total Page:16

File Type:pdf, Size:1020Kb

Publication Title 1-1962 publication_title print_identifier online_identifier publisher_name date_monograph_published_print 1-1962 - AIEE General Principles Upon Which Temperature 978-1-5044-0149-4 IEEE 1962 Limits Are Based in the rating of Electric Equipment 1-1969 - IEEE General Priniciples for Temperature Limits in the 978-1-5044-0150-0 IEEE 1968 Rating of Electric Equipment 1-1986 - IEEE Standard General Principles for Temperature Limits in the Rating of Electric Equipment and for the 978-0-7381-2985-3 IEEE 1986 Evaluation of Electrical Insulation 1-2000 - IEEE Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and 978-0-7381-2717-0 IEEE 2001 for the Evaluation of Electrical Insulation 100-2000 - The Authoritative Dictionary of IEEE Standards 978-0-7381-2601-2 IEEE 2000 Terms, Seventh Edition 1000-1987 - An American National Standard IEEE Standard for 0-7381-4593-9 IEEE 1988 Mechanical Core Specifications for Microcomputers 1000-1987 - IEEE Standard for an 8-Bit Backplane Interface: 978-0-7381-2756-9 IEEE 1988 STEbus 1001-1988 - IEEE Guide for Interfacing Dispersed Storage and 0-7381-4134-8 IEEE 1989 Generation Facilities With Electric Utility Systems 1002-1987 - IEEE Standard Taxonomy for Software Engineering 0-7381-0399-3 IEEE 1987 Standards 1003.0-1995 - Guide to the POSIX(R) Open System 978-0-7381-3138-2 IEEE 1994 Environment (OSE) 1003.1, 2004 Edition - IEEE Standard for Information Technology - Portable Operating System Interface (POSIX(R)) - 978-0-7381-4040-7 IEEE 2004 Base Definitions 1003.1, 2013 Edition - Standard for Information Technology— Portable Operating System Interface (POSIX(R)) Base 978-0-7381-8331-2 IEEE 2013 Specifications, Issue 7 1003.1, 2016 Edition - Standard for Information Technology-- Portable Operating System Interface (POSIX(R)) Base 978-1-5044-2337-3 IEEE 2016 Specifications, Issue 7 1003.1-1988 - IEEE Standard Portable Operating System 978-0-7381-1372-2 IEEE 1988 Interface for Computer Environments 1003.1-2001 - IEEE Standard for IEEE Information Technology - 978-0-7381-3047-7 IEEE 2001 Portable Operating System Interface (POSIX(R)) 1003.1-2001/Cor 1-2002 - Standard for IEEE Std 1003.1- 2001/Cor 1 2002 Standard for Information Technology -- 978-0-7381-3498-7 IEEE 2003 Portable Operating System Interface (POSIX(R)) -- Technical Corrigendum Number 1 publication_title print_identifier online_identifier publisher_name date_monograph_published_print 1003.1-2001/Cor 2-2004 - IEEE Standard for Information Technology - Portable Operating System Interface (POSIX(r)) - 978-0-7381-3987-6 IEEE 2004 Technical Corrigendum 2 1003.1-2008 - IEEE Standard for Information Technology - 978-0-7381-4048-3 IEEE 2008 Portable Operating System Interface (POSIX(R)) 1003.1-2008/Cor 1-2013 - IEEE Standard for Information Technology—Portable Operating System Interface (POSIX(R)) 978-0-7381-8265-0 IEEE 2013 Base Specifications, Issue 7 - Technical Corrigendum 1 1003.1-2008/Cor 2-2016 - IEEE Standard for Information Technology -- Portable Operating System Interface (POSIX(R)) 978-1-5044-2148-5 IEEE 2016 - Base Specifications, Issue 7 -- Technical Corrigendum 2 1003.1-2017 - IEEE Standard for Information Technology-- Portable Operating System Interface (POSIX(R)) Base 978-1-5044-4542-9 IEEE 2018 Specifications, Issue 7 1003.1-2017 - IEEE Standard for Information Technology-- Portable Operating System Interface (POSIX(R)) Base 978-1-5044-4963-2 IEEE 2018 Specifications, Issue 7 1003.1/2003.1-1994 - IEEE Standards Interpretations for IEEE Std 1003.1-1990 and IEEE Std 2003.1-1992 (March 1994 978-1-5593-7410-1 IEEE 1994 Edition) 1003.1/2003.1-1994 - IEEE Standards Interpretations for IEEE Std 1003.1-1990 and IEEE Std 2003.1-1992 (March 1994 978-1-5593-7410-1 IEEE 1994 Edition) 1003.10-1995 - IEEE Standard for Information Technology POSIX(R)-Based Supercomputing Application Environment 978-0-7381-2761-3 IEEE 1995 Profile 1003.13-1998 - IEEE Standard for Information Technology - Standardized Application Environment Profile - POSIX(R) 978-0-7381-0632-8 IEEE 1999 Realtime Application Support 1003.13-2003 - IEEE Standard for Information Technology- Standardized Application Environment Profile (AEP)-POSIX 0-7381-3886-X 0-7381-0632-1 IEEE 2004 Realtime and Embedded Application Support 1003.1b-1993 - IEEE Standard for Information Technology - Portable Operating System Interfaces (POSIX(R)) - Part 1: 978-1-5593-7375-3 IEEE 1994 System Application Program Interface (API) - Amendment 1: Realtime Extension [C language] 1003.1d-1999 - IEEE Standard for Information Technology- Portable Operating System Interface (POSIX)-Part 1: System 978-0-7381-1816-1 IEEE 1999 Application Program Interface (API)- Amendment D: Additional Real time Extensions [C Language] publication_title print_identifier online_identifier publisher_name date_monograph_published_print 1003.1j-2000 - IEEE Standard for Information Technology-- Portable Operating System Interface (POSIX(R))--Part 1: 978-0-7381-1941-0 IEEE 2000 System Application Program Interface (API)--Amendment 5: Advanced Realtime Extensions [C Language] 1003.1q-2000 - IEEE Standard for Information technology-- Portable Operating Systems Interface (POSIX(R))--Part 1: 978-0-7381-2476-6 IEEE 2001 System Application Program Interface (API)--Amendment 7: Tracing [C Language] 1003.2-1992 - IEEE Standard for Information Technology-- Portable Operating System Interfaces (POSIX(R))--Part 2: Shell 978-0-7381-1376-0 IEEE 1993 and Utilities 1003.2/INT-1994 - IEEE Standards Interpretations for IEEE Std 978-1-55937-411-8 IEEE 1994 1003.2-1992 1003.23-1998 - IEEE Guide for Developing User Open System 978-0-7381-3949-4 IEEE 1999 Environment (OSE) Profiles 1003.26-2003 - IEEE Standard for Information Technology - Portable Operating System Interface (POSIX(R)) - Part 26: 978-0-7381-3884-8 IEEE 2004 Device Control Application Program Interface (API) [C Language] 1003.2d-1994 - IEEE Standard for Information Technology-- Portable Operating System Interface (POSIX(R))--Part 2: Shell 978-0-7381-0633-5 IEEE 1995 and Utilities--Amendment 1: Batch Environment 1003.3-1991 - IEEE Standard for Information Technology-Test 1-55937-104-8 0-7381-4314-6 IEEE 1991 Methods for Measuring Conformance to POSIX 1003.5-1992 - IEEE Standard for Information Technology-- POSIX(R) Ada Language Interfaces--PART 1: Binding for 978-1-55937-229-9 IEEE 1994 System Application Program Interface (API) 1003.5/INT-1994 - IEEE Standards Interpretations for IEEE Std 978-1-55937-409-5 IEEE 1994 1003.5-1992 1003.5b-1996 - IEEE Standard for Information Technology-- POSIX(R) Ada Language Interfaces--Part 1: Binding for System 978-0-7381-0634-2 IEEE 1995 Application Program Interface (API)--Amendment 1: Realtime Extensions 1003.9-1992 - IEEE Standard for InformationTechnology - POSIX(R) FORTRAN 77 Language Interfaces - Part 1: Binding 978-0-7381-3746-9 IEEE 1992 for System Application Program Interface (API) 10038-1993 - ISO/IEC/IEEE International Standard for Information technology-Telecommunications and information 978-0-7381-9305-2 IEEE 1993 exchange between systems - Local area networks - Media access control (MAC) bridges publication_title print_identifier online_identifier publisher_name date_monograph_published_print 1004-1987 - IEEE Standard Definitions of Planar Transmission 0-7381-4135-6 IEEE 1988 Lines 1005-1991 - IEEE Standard Definitions and Characterization of 978-1-5593-7136-0 IEEE 1991 Floating Gate Semiconductor Arrays 1005-1998 - IEEE Standard Definitions and Characterization of 0-7381-0620-8 0-7381-3952-1 IEEE 1998 Floating Gate Semiconductor Arrays 1007-1991 - IEEE Standard Methods and Equipment for Measuring the Transmission Characteristics of Pulse-Code 978-0-7381-3951-7 IEEE 1992 Modulation (PCM) Telecommunications Circuits and Systems 1008-1987 - IEEE Standard for Software Unit Testing 978-0-7381-0400-3 IEEE 1986 101-1987 - IEEE Guide for the Statistical Analysis of Thermal 978-0-7381-0826-1 IEEE 1988 Life Test Data 1010-1987 - IEEE Guide for Control of Hydroelectric Power 978-0-7381-1104-9 IEEE 1988 Plants 1010-2006 - IEEE Guide for Control of Hydroelectric Power 978-0-7381-4953-0 IEEE 2006 Plants 1012-1998 - IEEE Standard for Software Verification and 978-0-7381-0435-5 IEEE 1998 Validation 1012-1998 - IEEE Standard for Software Verification and 978-1-5044-3894-0 IEEE 1998 Validation - Redline 1012-2004 - IEEE Standard for Software Verification and 978-0-7381-4642-3 IEEE 2005 Validation 1012-2012 - IEEE Standard for System and Software 978-0-7381-7268-2 IEEE 2012 Verification and Validation 1012-2012 - IEEE Standard for System and Software 978-0-7381-7571-3 IEEE 2012 Verification and Validation - Redline 1012-2016 - IEEE Standard for System, Software, and Hardware 978-1-5044-1812-6 IEEE 2017 Verification and Validation 1012-2016 - IEEE Standard for System, Software, and Hardware 978-1-5044-4896-3 IEEE 2017 Verification and Validation - Redline 1012a-1998 - IEEE Standard for Software Verification and 978-0-7381-1426-2 IEEE 1998 Validation - Content Map to IEEE 12207.1 1013-1990 - IEEE Recommended Practice for Sizing Lead-Acid 978-0-7381-2990-7 IEEE 1990 Batteries for Photovoltaic (PV) Systems 1013-2000 - IEEE Recommended Practice for Sizing Lead-Acid 978-0-7381-1943-4 IEEE 2001 Batteries for Photovoltaic (PV) Systems 1013-2007 - IEEE Recommended Practice for Sizing Lead-Acid 978-0-7381-5594-4 IEEE 2007 Batteries for Stand-Alone Photovoltaic (PV) Systems 1013-2007 - IEEE Recommended Practice for Sizing Lead-Acid 978-0-7381-6898-2 IEEE 2007 Batteries for Stand-Alone Photovoltaic (PV) Systems - Redline publication_title
Recommended publications
  • Prostep Ivip CPO Statement Template
    CPO Statement of Mentor Graphics For Questa SIM Date: 17 June, 2015 CPO Statement of Mentor Graphics Following the prerequisites of ProSTEP iViP’s Code of PLM Openness (CPO) IT vendors shall determine and provide a list of their relevant products and the degree of fulfillment as a “CPO Statement” (cf. CPO Chapter 2.8). This CPO Statement refers to: Product Name Questa SIM Product Version Version 10 Contact Ellie Burns [email protected] This CPO Statement was created and published by Mentor Graphics in form of a self-assessment with regard to the CPO. Publication Date of this CPO Statement: 17 June 2015 Content 1 Executive Summary ______________________________________________________________________________ 2 2 Details of Self-Assessment ________________________________________________________________________ 3 2.1 CPO Chapter 2.1: Interoperability ________________________________________________________________ 3 2.2 CPO Chapter 2.2: Infrastructure _________________________________________________________________ 4 2.3 CPO Chapter 2.5: Standards ____________________________________________________________________ 4 2.4 CPO Chapter 2.6: Architecture __________________________________________________________________ 5 2.5 CPO Chapter 2.7: Partnership ___________________________________________________________________ 6 2.5.1 Data Generated by Users ___________________________________________________________________ 6 2.5.2 Partnership Models _______________________________________________________________________ 6 2.5.3 Support of
    [Show full text]
  • Getting Started with Your VXI-1394 Interface for Windows NT/98 And
    VXI Getting Started with Your VXI-1394 Interface for Windows NT/98 VXI-1394 Interface for Windows NT/98 November 1999 Edition Part Number 322109D-01 Worldwide Technical Support and Product Information www.ni.com National Instruments Corporate Headquarters 11500 North Mopac Expressway Austin, Texas 78759-3504 USA Tel: 512 794 0100 Worldwide Offices Australia 03 9879 5166, Austria 0662 45 79 90 0, Belgium 02 757 00 20, Brazil 011 284 5011, Canada (Calgary) 403 274 9391, Canada (Ontario) 905 785 0085, Canada (Québec) 514 694 8521, China 0755 3904939, Denmark 45 76 26 00, Finland 09 725 725 11, France 01 48 14 24 24, Germany 089 741 31 30, Greece 30 1 42 96 427, Hong Kong 2645 3186, India 91805275406, Israel 03 6120092, Italy 02 413091, Japan 03 5472 2970, Korea 02 596 7456, Mexico (D.F.) 5 280 7625, Mexico (Monterrey) 8 357 7695, Netherlands 0348 433466, Norway 32 27 73 00, Poland 48 22 528 94 06, Portugal 351 1 726 9011, Singapore 2265886, Spain 91 640 0085, Sweden 08 587 895 00, Switzerland 056 200 51 51, Taiwan 02 2377 1200, United Kingdom 01635 523545 For further support information, see the Technical Support Resources appendix. To comment on the documentation, send e-mail to [email protected] © Copyright 1998, 1999 National Instruments Corporation. All rights reserved. Important Information Warranty The National Instruments VXI-1394 board is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace equipment that proves to be defective during the warranty period.
    [Show full text]
  • Digital Systems Modeling Chapter 2 VHDL-Based Design
    Digital Systems Modeling Chapter 2 VHDL-Based Design Alain Vachoux Microelectronic Systems Laboratory [email protected] Digital Systems Modeling Chapter 2: VHDL-Based Design Chapter 2: Table of contents ♦ VHDL overview ♦ Synthesis with VHDL ♦ Test bench models & verification techniques A. Vachoux, 2004-2005 Digital Systems Modeling Chapter 2: VHDL-Based Design - 2 A. Vachoux 2004-2005 2-2 Digital Systems Modeling Chapter 2: VHDL-Based Design VHDL highlights (1/2) ♦ Hardware description language • Digital hardware systems • Modeling, simulation, synthesis, documentation • IEEE standard 1076 (1987, 1993, 2002) ♦ Originally created for simulation • IEEE standards 1164 (STD_LOGIC) and 1076.4 (VITAL) ♦ Further adapted to synthesis • Language subset • IEEE standards 1076.3 (packages) and 1076.6 (RTL semantics) A. Vachoux, 2004-2005 Digital Systems Modeling Chapter 2: VHDL-Based Design - 3 A. Vachoux 2004-2005 2-3 Digital Systems Modeling Chapter 2: VHDL-Based Design VHDL highlights (2/2) ♦ Application domain (abstraction levels): Functional -> logic ♦ Modularity • 5 design entities: entity, architecture, package declaration and body, configuration • Separation of interface from implementation • Separate compilation ♦ Strong typing • Every object has a type • Type compatibility checked at compile time ♦ Extensibility: User-defined types ♦ Model of time • Discrete time, integer multiple of some MRT (Minimum Resolvable Time) ♦ Event-driven simulation semantics A. Vachoux, 2004-2005 Digital Systems Modeling Chapter 2: VHDL-Based Design - 4 A. Vachoux 2004-2005 2-4 Digital Systems Modeling Chapter 2: VHDL-Based Design VHDL-based design flow Editor (text or graphic) Test bench models VHDL packages RTL model Logic simulation Logic/RTL Constraints synthesis (area, timing, power) VHDL VITAL standard cell Gate-level modeld netlist Standard cell library SDF file Place & route Delay Layout extraction A.
    [Show full text]
  • Xilinx Synthesis and Verification Design Guide
    Synthesis and Simulation Design Guide 8.1i R R Xilinx is disclosing this Document and Intellectual Property (hereinafter “the Design”) to you for use in the development of designs to operate on, or interface with Xilinx FPGAs. Except as stated herein, none of the Design may be copied, reproduced, distributed, republished, downloaded, displayed, posted, or transmitted in any form or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Xilinx. Any unauthorized use of the Design may violate copyright laws, trademark laws, the laws of privacy and publicity, and communications regulations and statutes. Xilinx does not assume any liability arising out of the application or use of the Design; nor does Xilinx convey any license under its patents, copyrights, or any rights of others. You are responsible for obtaining any rights you may require for your use or implementation of the Design. Xilinx reserves the right to make changes, at any time, to the Design as deemed desirable in the sole discretion of Xilinx. Xilinx assumes no obligation to correct any errors contained herein or to advise you of any correction if such be made. Xilinx will not assume any liability for the accuracy or correctness of any engineering or technical support or assistance provided to you in connection with the Design. THE DESIGN IS PROVIDED “AS IS” WITH ALL FAULTS, AND THE ENTIRE RISK AS TO ITS FUNCTION AND IMPLEMENTATION IS WITH YOU. YOU ACKNOWLEDGE AND AGREE THAT YOU HAVE NOT RELIED ON ANY ORAL OR WRITTEN INFORMATION OR ADVICE, WHETHER GIVEN BY XILINX, OR ITS AGENTS OR EMPLOYEES.
    [Show full text]
  • Emerging Technologies Multi/Parallel Processing
    Emerging Technologies Multi/Parallel Processing Mary C. Kulas New Computing Structures Strategic Relations Group December 1987 For Internal Use Only Copyright @ 1987 by Digital Equipment Corporation. Printed in U.S.A. The information contained herein is confidential and proprietary. It is the property of Digital Equipment Corporation and shall not be reproduced or' copied in whole or in part without written permission. This is an unpublished work protected under the Federal copyright laws. The following are trademarks of Digital Equipment Corporation, Maynard, MA 01754. DECpage LN03 This report was produced by Educational Services with DECpage and the LN03 laser printer. Contents Acknowledgments. 1 Abstract. .. 3 Executive Summary. .. 5 I. Analysis . .. 7 A. The Players . .. 9 1. Number and Status . .. 9 2. Funding. .. 10 3. Strategic Alliances. .. 11 4. Sales. .. 13 a. Revenue/Units Installed . .. 13 h. European Sales. .. 14 B. The Product. .. 15 1. CPUs. .. 15 2. Chip . .. 15 3. Bus. .. 15 4. Vector Processing . .. 16 5. Operating System . .. 16 6. Languages. .. 17 7. Third-Party Applications . .. 18 8. Pricing. .. 18 C. ~BM and Other Major Computer Companies. .. 19 D. Why Success? Why Failure? . .. 21 E. Future Directions. .. 25 II. Company/Product Profiles. .. 27 A. Multi/Parallel Processors . .. 29 1. Alliant . .. 31 2. Astronautics. .. 35 3. Concurrent . .. 37 4. Cydrome. .. 41 5. Eastman Kodak. .. 45 6. Elxsi . .. 47 Contents iii 7. Encore ............... 51 8. Flexible . ... 55 9. Floating Point Systems - M64line ................... 59 10. International Parallel ........................... 61 11. Loral .................................... 63 12. Masscomp ................................. 65 13. Meiko .................................... 67 14. Multiflow. ~ ................................ 69 15. Sequent................................... 71 B. Massively Parallel . 75 1. Ametek.................................... 77 2. Bolt Beranek & Newman Advanced Computers ...........
    [Show full text]
  • Powerplay Power Analysis 8 2013.11.04
    PowerPlay Power Analysis 8 2013.11.04 QII53013 Subscribe Send Feedback The PowerPlay Power Analysis tools allow you to estimate device power consumption accurately. As designs grow larger and process technology continues to shrink, power becomes an increasingly important design consideration. When designing a PCB, you must estimate the power consumption of a device accurately to develop an appropriate power budget, and to design the power supplies, voltage regulators, heat sink, and cooling system. The following figure shows the PowerPlay Power Analysis tools ability to estimate power consumption from early design concept through design implementation. Figure 8-1: PowerPlay Power Analysis From Design Concept Through Design Implementation PowerPlay Early Power Estimator Quartus II PowerPlay Power Analyzer Higher Placement and Simulation Routing Results Results Accuracy Quartus II Design Profile User Input Estimation Design Concept Design Implementation Lower PowerPlay Power Analysis Input For the majority of the designs, the PowerPlay Power Analyzer and the PowerPlay EPE spreadsheet have the following accuracy after the power models are final: • PowerPlay Power Analyzer—±20% from silicon, assuming that the PowerPlay Power Analyzer uses the Value Change Dump File (.vcd) generated toggle rates. • PowerPlay EPE spreadsheet— ±20% from the PowerPlay Power Analyzer results using .vcd generated toggle rates. 90% of EPE designs (using .vcd generated toggle rates exported from PPPA) are within ±30% silicon. The toggle rates are derived using the PowerPlay Power Analyzer with a .vcd file generated from a gate level simulation representative of the system operation. © 2013 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are trademarks of Altera Corporation and registered in the U.S.
    [Show full text]
  • Interconnect Solutions Short Form Catalog
    Interconnect Solutions Short Form Catalog How to Search this Catalog This digital catalog provides you with three quick ways to find the products and information you are looking for. Just point and click on the bookmarks to the left, the linked images on the next page or the labeled sections of the table of contents. You can also use the “search” function built into Adobe Acrobat to jump directly to any text reference in this document. Acrobat “Search” function instructions: 1. Press CONTROL + F 2. When the dialog box appears, type in the word or words you are looking for and press ENTER. 3. Depending on your version of Acrobat, it will either take you directly to the first instance found, or display a list of pages where the text can be found. In the latter, click on the link to the pages provided. Interconnect Solutions Short Form Catalog Complete Solutions for the Electronics Industry 3M Electronics offers a comprehensive range of Interconnect Solutions for the electronics industry with a product portfolio that includes connectors, cables, cable assemblies and assembly tooling for a wide variety of applications. 3M is dedicated to innovation, continually developing new products that become an important part of everyday life across many diverse markets. A number of 3M solution categories are based on custom-designed products for specialized applications. 3M Electronics can help you design, modify and customize your product as well as help you to seamlessly integrate our products into your manufacturing process on a global basis. RoHS Compliant Statement “RoHS compliant” means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium.
    [Show full text]
  • SIS4100 VME to FASTBUS Interface User Manual
    SIS Documentation SIS4100 FASTBUS Master SIS4100 VME to FASTBUS Interface User Manual SIS GmbH Moorhof 2d 22399 Hamburg Germany Phone: ++49 (0) 40 60 87 305 0 Fax: ++49 (0) 40 60 87 305 20 email: [email protected] http://www.struck.de Version: 1.01 as of 27.07.99 Page 1 of 57 SIS Documentation SIS4100 FASTBUS Master Revision Date Modification 0.1 01.02.99 Generation 1.0 26.07.99 First official release 1.01 27.07.99 some additions Copyright note: You are welcome to copy or reproduce this manual in part or whole as long as SIS GmbH is clearly indicated as originator (by the SIS GmbH FASTBUS icon on the top of the page e.g.). Page 2 of 57 SIS Documentation SIS4100 FASTBUS Master Table of contents 1 Introduction..................................................................................................................................................... 5 2 NGF Working Principle .................................................................................................................................. 6 3 Design ............................................................................................................................................................. 7 3.1 Features ................................................................................................................................................... 7 3.2 Mechanical concept................................................................................................................................. 7 3.3 VME properties......................................................................................................................................
    [Show full text]
  • System-On-Chip Design with Arm® Cortex®-M Processors
    System-on-Chip Design with Arm® Cortex®-M Processors Reference Book JOSEPH YIU System-on-Chip Design with Arm® Cortex®-M Processors System-on-Chip Design with Arm® Cortex®-M Processors Reference Book JOSEPH YIU Arm Education Media is an imprint of Arm Limited, 110 Fulbourn Road, Cambridge, CBI 9NJ, UK Copyright © 2019 Arm Limited (or its affiliates). All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or any other information storage and retrieval system, without permission in writing from the publisher, except under the following conditions: Permissions You may download this book in PDF format from the Arm.com website for personal, non- commercial use only. You may reprint or republish portions of the text for non-commercial, educational or research purposes but only if there is an attribution to Arm Education. This book and the individual contributions contained in it are protected under copyright by the Publisher (other than as may be noted herein). Notices Knowledge and best practice in this field are constantly changing. As new research and experience broaden our understanding, changes in research methods and professional practices may become necessary. Readers must always rely on their own experience and knowledge in evaluating and using any information, methods, project work, or experiments described herein. In using such information or methods, they should be mindful of their safety and the safety of others, including parties for whom they have a professional responsibility. To the fullest extent permitted by law, the publisher and the authors, contributors, and editors shall not have any responsibility or liability for any losses, liabilities, claims, damages, costs or expenses resulting from or suffered in connection with the use of the information and materials set out in this textbook.
    [Show full text]
  • Opening Plenary March 2021
    Opening Plenary March 2021 Glenn Parsons – IEEE 802.1 WG Chair [email protected] 802.1 plenary agenda Monday, March 8th opening Tuesday, March 16th closing • Copyright Policy • Copyright Policy • Call for Patents • Call for Patents • Participant behavior • Participant behavior • Administrative • Membership status • Membership status • Future Sessions • Future Sessions • Sanity check – current projects • 802 EC report • TG reports • Sanity check – current projects • Outgoing Liaisons • Incoming Liaisons • Motions for EC • TG agendas • Motions for 802.1 • Any other business • Any other business 2 INSTRUCTIONS FOR CHAIRS OF STANDARDS DEVELOPMENT ACTIVITIES At the beginning of each standards development meeting the chair or a designee is to: .Show the following slides (or provide them beforehand) .Advise the standards development group participants that: .IEEE SA’s copyright policy is described in Clause 7 of the IEEE SA Standards Board Bylaws and Clause 6.1 of the IEEE SA Standards Board Operations Manual; .Any material submitted during standards development, whether verbal, recorded, or in written form, is a Contribution and shall comply with the IEEE SA Copyright Policy; .Instruct the Secretary to record in the minutes of the relevant meeting: .That the foregoing information was provided and that the copyright slides were shown (or provided beforehand). .Ask participants to register attendance in IMAT: https://imat.ieee.org 3 IEEE SA COPYRIGHT POLICY By participating in this activity, you agree to comply with the IEEE Code of Ethics, all applicable laws, and all IEEE policies and procedures including, but not limited to, the IEEE SA Copyright Policy. .Previously Published material (copyright assertion indicated) shall not be presented/submitted to the Working Group nor incorporated into a Working Group draft unless permission is granted.
    [Show full text]
  • N94-13338 1.1.1 3Rd NASA Symposium on VLSI Design 1991
    N94-13338 1.1.1 3rd NASA Symposium on VLSI Design 1991 Experience with Custom Processors in Space Flight Applications M. E. Fraeman, J. R. Hayes, D. A. Lohr, B. W. Ballard, R. L. Williams, and R. M. Henshaw Johns Hopkins University Applied Physics Laboratory Laurel, Maryland 20723 Abstract- APL has developed a magnetometer instrument for a Swedish satel- lite named Freja with launch scheduled for August 1992 on a Chinese Long March rocket. The magnetometer controller utilized a custom microprocessor designed at APL with the Genesil silicon compiler. The processor evolved from our experience with an older bit-slice design and two prior single chip efforts. The architecture of our microprocessor greatly lowered software development costs because it was optimized to provide an interactive and extensible pro- gramming environment hosted by the target hardware. Radiation tolerance of the microprocessor was also tested and was adequate for Freja's mission-- 20 kRad(Si) total dose and very infrequent latch-up and single event upset events. 1 Introduction The Johns Hopkins University Applied Physics Laboratory (APL) has developed a micro- processor that is well suited to one-of-a-kind embedded applications especially in satellite instrument control. The chip has been qualified for use in a magnetometer instrument for the Swedish Freja satellite. The processor's language directed architecture reduced Freja software costs because the flight hardware served as its own development system. Thus, unlike traditional interpreted programming languages like Basic, Lisp, or Smalltalk, our Forth language development system was fully supported on the embedded flight proces- sor. Performance was also equivalent or better than that obtained by other microprocessors programmed in languages like C with traditional cross-compilers and development systems.
    [Show full text]
  • XMOS for AVB Ethernet Based Networking for Audio/Video
    Only a few years ago, computer networks were complex beasts tended by special acolytes and running on different standards. Today they have become commonplace in many homes and offices, simply plugged together using Ethernet technology. The same revolutionary change is coming for Audio/Video (AV) networking, as AVB (Audio XMOS for AVB: Video Bridging) products that run over the same network, Ethernet based networking begin to enter the market. for Audio/Video Putting together networks of AV equipment for professional and consumer use, or for use in How Ethernet Works vehicles, is about to become simpler while also Within Ethernet, data is transmitted between delivering better quality. No longer will devices (such as a computer and a printer) in specialist connectors and cables be needed to packets. Each packet carries one or more create a rats' nest of connectivity. Instead addresses for its destination. Like a postal packet traversing the postal system, the network has no Audio Video Bridging (AVB), a set of knowledge of what is in the packet, but uses the international standards, will make setting up address to pass the packet to the next point in the and managing networks almost as simple as network. just plugging together the different elements. In an Ethernet based network, each endpoint Sound and video sources will be mixed and (computer, storage element, printer etc.) is distributed to screens and speakers, with high identified by a unique address and has a single quality, low latency and tight synchronization. connection to the network, through an Ethernet Furthermore, the connectors and cables are switch.
    [Show full text]