LEVIN SAWMAKERS LTD. Roger C Brown (Corryong) PTY Ltd Phone: +61 260 76 1788 Fax: +61 260 76 1795 Email: [email protected] 11 Hanson St (Box 68), Corryong, Victoria 3707, Australia. THE STANDARD FORESTRY PRUNING KIT
Prun-Off Lopper 26/660 For branches up to 65mm in diameter
BushMate Saw 14/350B Spare Blade 14/350BB (Hard Tipped)
Epicormic Knife EK6
Forestry Ladder Lightweight, strong aluminium ladders specifically designed for forestry use. 2.4 metre ladder (FA2.4) for a medium prune to 4.5 metres high. 4.2 metre ladder (FA4.2) for a high prune to 6.5 metres (Also available in lengths 1.5m, 2.1m, 2.7m, 3.0m, 3.3m, 3.6m, 3.9m, 4.5m, 4.8m, 5.1m, 5.4m, 5.7m, 6.0m, & 6.3m.) Holster for above Leather with Epi Pouch and Belt LEB1.
This is the standard range of products used for pruning pinus radiata.
1 LEVIN SAWMAKERS LTD. FORESTRY PRUNING LOPPERS Timbersaws loppers evolved from the combined research of leading foresters and individuals. Their expertise and knowledge were brought together to produce loppers which are recognised as industry leaders. The double action handle lever system combined with the design of the straight blade and curved blade gives you the best performance with the least amount of effort.
Prun-Off Lopper 26/660 (blue) Prun-Off 26/660 Good all rounder for branches up to 65mm diameter.
Maxi II M26/660 MAXI II Lopper M26/660 (red) Similar to the Prun-Off but sleeker blades therefore more for the experienced pruning contractor. For branches up to 65mm diameter.
Kiwi Lopper 22/560 (yellow) Ideal for low pruning of branches up to 45mm diameter. Kiwi 22/560
Rami Lopper 26.5/675 (green) Rami 26.5/675 For the bigger branches up to 85mm diameter.
13mm
11 Replacement Parts /16 75mm Combination Lopper Spanner & Screwdriver 17mm Honing Stone
Combination Lopper Spanner & Screwdriver 11/1613 Fits onto all the nuts and bolts on Prun-Off 26/660, MAXI II M26/660, Kiwi 22/560 and Rami 26.5/675 loppers. You need two spanners to undo and do up nuts and bolts. Honing Stone HS1 Fine on one side, coarse on the other. Maintaining a sharp edge on your lopper blade ensures efficient work rates and clean cuts. A blunt edge results in rough cuts and potential damage to the branch collar, which in turn inhibits healing and occlusion. Apply oil to the stone to maximise its efficiency.
2 LEVIN SAWMAKERS LTD. FORESTRY PRUNING SUPPLIES
Bushmate 14/350B The standard forestry pruning saw. Bushmate 14/350B Replacement Lotus 14/350L Top ML4
Lotus 14/350L
Spare Blades: Bushmate Blades 14/350BB
Drawbolt complete with washer & nut 14/350D
Blade Pins: Front Pin 14/350FP Rear Pin (drawbolt end) 14/350RP
Natanoko 2000 - 300mm 401-33 Natanoko 2000 blade - 300mm 402-33
Epicormic Knife For removing pine needles and epicormic shoots EK6
Freund 2002
LONG POLE PRUNING SAWS
Long Pole Pruning Saw LPPS.
2.9 metres long for 4 metre pruning height. If you wish to prune higher than 4 metres, purchase a second middle to screw in and prune up to 6 metres. Designed for commercial or home use. Can be used as a long or short pole pruner. Fitted with high grade 20” steel blade.
Hayauchi: A true professional heavy duty extension pole saw, available in 177-39 HAYAUCHI 1 Extension Pole 2.28 - 3.7m three sizes. The upper sickle is used to cut vines, the lower sickle 178-39 HAYAUCHI 2 Extension Poles 2.35 - 4.9m is used to undercut bark allowing a clean cut without damaging 179-39 HAYAUCHI 3 Extension Poles 2.44 - 6.3m the tree. Quick and easy to extend and very efficient cutting.
3 LEVIN SAWMAKERS LTD. FORESTRY PRUNING HOLSTERS
Leather Holster with Epi Pouch & Belt LEB1 For Pruning Lopper, Bushmate or Lotus Saw, Spare Blades and Epicormic Knife. Tough full grain leather, quick release belt buckle, PVC sleeve for spare blades, and leather pouch for Epicormic Knife.
Leather Holster with Epi Pouch without Belt LE2 (Same as LEB1 but without belt.)
LEB1 Leather Holster without Epi Pouch with Belt LB3 For Pruning Lopper, Bushmate or Lotus Saw, Spare Blades. Tough full grain leather, quick release belt buckle, PVC sleeve for spare blades.
Leather Holster without Epi Pouch without Belt L4 LB3 (Same as LB3 but without belt.)
Saw Pouch:- Leather LSP1 For Bushmate or Lotus. Strong leather, stitched and riveted.
LSP1
Epicormic Knife Pouch CL79
CL79
BELTS
Heavy Duty Nylon Belt with Steel Buckle CL50
Heavy Duty Nylon Belt with Quick Release Buckle CL51
Quick Release Buckle only QRB1
4 LEVIN SAWMAKERS LTD. FORESTRY LADDERS & STEPS
Forestry Aluminium Ladders. Light, durable aluminium 2.4 metre ladder designed for forestry pruning: Aluminium Ladder 1.5 metre FA1.5 4.2 metre FA4.2 1.8 metre FA1.8 4.5 metre FA4.5 2.1 metre FA2.1 4.8 metre FA4.8 2.4 metre FA2.4 5.1 metre FA5.1 2.7 metre FA2.7 5.4 metre FA5.4 3.0 metre FA3.0 5.7 metre FA5.7 3.3 metre FA3.3 6.0 metre FA6.0 3.6 metre FA3.6 6.3 metre FA6.3 Replacement 3.9 metre FA3.9 Top ML4
Replacement Top ML4 (includes nuts and bolts) Safety Chain ML10 (optional extra)
For the majority of pruning the two most common ladders purchased are the 2.4 Safety Chain metre for your medium prune and the 4.2 metre for your high prune. The 2.4 ML10 metre ladder plus your own body height and arm reach allows you to prune up to 4.7 metres and the 4.2 metre ladder allows you to prune up to 6.5 metres.
Unistep ML9 Multilift complete with Ladder Safety Chain ML12 Multilift without Ladder Safety Chain ML11
Unistep ML9
Multilift
Provides an extra metre of The Multilift is used with your ladder to increase and vary the height of your pruning, pruning height, either off the e.g. prune up to 6.5 metres using a 2.4 metre forestry ladder. ground or above the ladder. 1. Attach the Multilift platform at right angles and just above the ladder. 2. Step onto the Multilift platform, bend down and pick up the ladder. 3. Slot any ladder rung into the rounded channel on the Multilift platform. 4. Secure the ladder with the safety chain two thirds of the way up the ladder.
5 LEVIN SAWMAKERS LTD. CHAINSAW PRUNING KIT
Chainsaw Pruning Kit CPK Consists of:- 1) Waist Back Pad CL55 2) Heavy Duty Belt with Steel Buckle CL50 3) Belt Slide CL57 to stop the belt sliding back through the loops 4) Pruning Chainsaw Backboard PCB 5) Pruning Chainsaw Handle Hook PCH FORESTRY PRUNING HARNESSES
Body Belt 2DD The side D’s are adjustable along the length of the restraint belt. This allows the user to position the D’s out of the way of other gear being carried and to suit his own waist size. The soft foam backpad is easily removed for cleaning or replacing.
Body Belt without Backpad BB1 Backpad P2
(1.3kgs) Body Belt Complete with 1.5 metre Polyester Rope Lanyard 2DD1.5PR The polyester rope lanyard has a quick mechanical rope adjuster, stop at one end and quick For Manual release double locking hook at the other end. Pruning 1.5 metre Polyester Rope Lanyard 1.5PR
Body Belt Complete with 1.5 metre Lightweight Wire Rope Lanyard 2DD1.5WR The lightweight wire rope lanyard has a quick mechanical rope adjuster, stop at one end and a quick release double locking hook at the other end. (1.4kgs) 1.5 metre Lightweight Wire Rope Lanyard 1.5WR For Manual and Chainsaw Pruning
Body Belt Complete with 1.1 metre Chain Lanyard 2DD1.1C Chain lanyard with slide adjuster for length and quick release double locking hook. Even though this harness combination is a few grams heavier than the others this is still the most (1.6kgs) popular choice. It will outlast all the others. 1.1 metre Chain Lanyard complete with slide adjuster, quick release For Manual and Chainsaw Pruning double locking hook and D shackle connectors 1.1C (Longer or shorter lengths of chain are available on request.)
Body Belt Complete with 1.2 metre Wire Rope Lanyard 2DD1.2PHL This wire rope adjuster has been designed to grip onto bare wire rope thereby doing away with the need for a nylon outer sheath. In the long run this saves you money having to replace the lanyard every time the outer sheath wears through. This lanyard is quick and easy to use. Highly recommended for chainsaw pruning. (1.6kgs) 1.2 metre Wire Rope Lanyard 1.2PHL For Manual and Chainsaw Pruning
6 LEVIN SAWMAKERS LTD. FORESTRY SUPPLIES Featuring two belt loop positions, one for a shorter leg and the other for a longer leg LEGGINGS person. For Pruning Only Canvas (medium weight) CL16 Popular Choice With ankle straps CL16-AS A high quality polyester canvas, tough, flexible and durable. ‘Rip Stop’ Canvas (good in blackberry and gorse) CL15
With ankle straps CL15-AS For Pruning and Spraying Only PVC Heavyweight Red CL20 PVC Ripstop Trident Blue CL18 CHAINSAW PROTECTION Approved to AS/NZ4453 Chainsaw Chaps Clogger (small, medium, large). Meets AS/NZ4453 Two choices: (i) Clipped:- Has 5 sets of plastic quick release clips. (ii) Zipped:- Has zip fastening at lower leg with 2 sets of quick release clips. Chainsaw Trousers Clogger Meets AS/NZ4453 Sizes: 79cm, 83cm, 87cm, 91cm, 95cm, 99cm, 103cm, 107cm. Summer or winter weight. Arborist Chainsaw Trousers Clogger Meets AS/NZ4453 Hi tech stretch fabric to allow ease of leg stretch, baggy fit for ease of movement, zipped pockets, belt loops and buttons to fit braces.
Waist (cm) 79 83 87 91 95 99 103 107 Inleg (cm) 75 76 77 78 79 80 80 80
Butterfly Cape PVC BCPVC Heavy duty PVC cape with hood and inner lining over shoulders.
Water Bottle & Fuel Bottle Pouch CL85 PVC Butterfly Cape Holds up to a 2 litre water bottle. Belt loops on back. Velcro fastener.
7 LEVIN SAWMAKERS LTD. FORESTRY PLANTING TOOLS & EQUIPMENT
ACE 1 Planting Spade The Standard Planting Kit
ACE 1 Planting Spade ACE1 Planting Frame with Waist Pad & Belt Complete PF300 Planting Frame only PF Waist Pad CL55 Heavy Duty Belt with Steel Buckle CL50 Belt Slide CL57
Planting Frame with Waist Pad & Belt Complete PF300
Planting Frame with Backboard, Belt & Pad Complete PF301 Planting Frame only PF Backboard BB1 Heavy Duty Belt with Steel Buckle CL50 and Pad (small) CL45 Optional extra:- Shoulder Belt & Pad CL40
Planting Frame with Backboard, Pad & Belt Complete PF301 Planting Bag CL35 Heavy duty PVC. Sturdy waist belt with metal buckle. Quick release padded shoulder strap.
Donkey Pack DKY1 For carrying up to 5 seedling boxes at one time. Light weight aluminium frame. Incorporating the famous ‘Antartic Products’ K2 tramping pack frame for a comfortable load.
Planting Bag CL35
Donkey Pack DKY1
8 LEVIN SAWMAKERS LTD. FORESTRY PLANTING SPADES Years of design & development with forestry planting contractors has resulted in these specific spades.
Straight Shaft Offset Shaft
Ace 1 Ace 1 Light King Jack 1 Jack 2 Little Ripper
Spare Most Handle Popular with Rivet
The Ace 1, Ace 1 Light and King spades have their shafts parallel to the blades. The blades are round mouthed and double bevel ground for fast deep penetration of the ground. The Jack 1, Jack 2 and Little Ripper have their shafts offset to the blades. This allows for Walsh Atlas greater cultivation of the planting hole with less body movement by the person planting. ALL TIMBERSAWS SPADES FEATURE: Tough virtually unbreakable nylon yoke and TS1 tough polyu ergonomically designed soft handgrip to eliminate hand, wrist & elbow shock using TS8 sport shoe technology but with industrial toughness. Tough wear resistant blade material for long life and superior strength. Ace 1: Good all rounder for most soil types. Ace 1 Light: Specially designed for soft or pre-cultivated soils. King: The narrow blade enters the harder clay soils much easier. Good in stoney ground and opens a small hole for sand work. Jack 1: Good all rounder for most soil types. Ideal for extra cultivation. Jack 2: Designed for those who need to remove soil from the planting hole. Little Ripper: Designed for soft or pre-cultivated soils where cultivation is not so important.
Shaft Blade TS8 Blade Blade Blade Order Code Straight Handle Length width Weight Length width top thickness or Offset bottom Ace 1 Straight Timbersaws 960mm 300mm 170mm 125mm 4mm 2.770 Ace 1 Light Straight Timbersaws 960mm 300mm 170mm 125mm 3mm 2.550 King Straight Timbersaws 980mm 320mm 150mm 105mm 4mm 2.660 Jack 1 Offset Timbersaws 960mm 300mm 170mm 125mm 4mm 2.770 Jack 2 Offset Timbersaws 960mm 300mm 170mm 125mm 4mm 2.770 Little Ripper Offset Timbersaws 960mm 280mm 135mm 90mm 3mm 2.370 TS1 Offset Wooden 1030mm 310mm 160mm 110mm 2.5mm 2.600 TS8 Offset Wooden 900mm 310mm 160mm 110mm 2.5mm 2.500 Walsh Offset Wooden 1020mm 300mm 150mm 110mm 2.5mm 2.600 Atlas Offset Atlas 990mm 295mm 200mm 130mm 2.5mm 2.700
9 LEVIN SAWMAKERS LTD. DIGGING SPADES
ALL SPADES FEATURE: Tough virtually unbreakable nylon yoke and tough polyu ergonomically designed soft handgrip to eliminate hand, wrist & elbow shock using sport shoe technology but with industrial toughness. Tough wear resistant blade material for long life and superior strength.
Orde r Code Le ng th B la de B la de Blade width B la de We i g h t Le ng th width t op bottom thicknes s Gardener 990mm 270mm 170mm 170mm 3 mm 2.770 Gardener GARD Farme r 1010mm 290mm 185mm 185mm 4 mm 3.300
Gardener: Designed for gardening and light digging. Farmer: Ideal for farmers and contractors. Farmer FARM
HANDSAWS AND BOWSAWS
Handyman 24” 7, 8 & 10 point Bowsaw 21”
Craftsman 26” 7 & 8 point Bowsaw 24”, 30” & 36” Craftsman 22” 10 point
Pruning Saw CW 380 wooden handle
Pruning Saw CT 380 steel tube handle
CT/W 380 Holster - Leather CTWL
CT/W 380 Holster - Vinyl CTWV
10 LEVIN SAWMAKERS LTD.
Toucan - vertical and horizontal FUEL CANS Toucan Aluminium Fuel & Oil Can Vertical or Horizontal. Belt loops on the can. 3 litres fuel mix, 1 litre chain bar oil. Toucan Cap Toucan Pouch The fuel can is easily removed from the pouch for use rather than Vertical Front Vertical Back Vertical Toucan Pouch undoing your belt.
Horizontal Front Horizontal Back
Felling Wedges (plastic)
1 1 Windsor 5 /2” Windsor 7 /4” Windsor 10 ”
Windsor Wedge
Hammers Thorex Hammer 2lb Thorex Hammer 3lb Thorace Deadblow Hammer 2lb Thorex Thorace Scorpro Thorace Deadblow Hammer 3lb Hammer Hammer Hammer Replacement Caps 2lb Deadblow Deadblow Replacement Caps 3lb Scorpro Deadblow Hammer 3lb Developed in conjunction with LIRO. 40cm long - for a decent swing, but not too long to get caught up in slash. Replaceable Caps 3lb
Treefeller Belt Item 14 polyester Treefeller Belt Item 14 leather
New Tool Belt A27 Item 14 New Tool Belt with Belt A27A Treefeller Belt Holds hammer, wedges, files, tape etc. A27 New Tool Belt Holds hammer, wedges & files
Chainsaw Mitt - Short A01B Chainsaw Chainsaw Mitt A01B Mitt A01A Chainsaw Mitt - Long A01A Same as A01B except the leather cover is folded down over the finger knuckles.
11