DOCSLIB.ORG

SPG 1210 Signalling Signs and Instruction Plates

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
SPG 1210 Signalling Signs and Instruction Plates Engineering Specification Signals Equipment Specification SPG 1210 SIGNALLING SIGNS AND INSTRUCTION PLATES Version 1.6 Issued 6 November 2012 Reconfirmed 02 July 2019 Owner: Warwick Allison, Chief Engineer Signals and Control Systems Approved Warwick Allison Authorised Paul Szacsvay by: Chief Engineer by: Principal Engineer Signals and Control Systems Signalling Technology Disclaimer This document was prepared for use on the RailCorp Network only. RailCorp makes no warranties, express or implied, that compliance with the contents of this document shall be sufficient to ensure safe systems or work or operation. It is the document user’s sole responsibility to ensure that the copy of the document it is viewing is the current version of the document as in use by RailCorp. RailCorp accepts no liability whatsoever in relation to the use of this document by any party, and RailCorp excludes any liability which arises in any manner by the use of this document. Engineering Specification Copyright The information in this document is protected by Copyright and no part of this document may be reproduced, altered, stored or transmitted by any person without the prior consent of RailCorp. UNCONTROLLED WHEN PRINTED Page 1 of 38 RailCorp Engineering Specification — Signals — Equipment Specification SIGNALLING SIGNs and Instruction Plates SPG 1210 Document control Version Date Summary of change Replaced SC 00 24 00 00 SP Signs, Notice Boards and Instruction Plates – v2.2 of 12 July 2005. 1.1 08/01/2008 New RailCorp format plus changes to signs, notice boards and instruction plates 1.2 01/03/2010 Added sections for Altered Aspect Sequence, Multi-SPAD Alert and Signal Ahead Signs 1.3 May 2010 Application of TMA 400 format 1.4 1 June 2010 5.17 Invert image of Guards Indicator 1.5 5 Oct 2010 5.19: include name of LX where LX control areas overlap 1.6 6 Nov 2012 Title of specification changed to delete reference to 'boards'. Throughout the specification, 'board' changed to 'sign'. 3.2 – New sign added – Stop and Do not Proceed without Authority from Signaller. 3.6– New Berth Signs. 4.4 – added slip sign for use within Yard Limits 5.7 – Indicator – deleted and note added to reference to co-Acting signal. 5.7 – Indicator signal sign - deleted © RailCorp Page 2 of 38 Issued 6 November 2012 UNCONTROLLED WHEN PRINTED Version 1.6 RailCorp Engineering Specification — Signals — Equipment Specification SIGNALLING SIGNs and Instruction Plates SPG 1210 Contents 1 General.....................................................................................................................................5 1.1 Introduction ................................................................................................................5 1.2 Referenced Documents.............................................................................................5 1.3 Form of lettering.........................................................................................................5 1.4 Materials ....................................................................................................................6 1.5 Dimensional tolerances .............................................................................................6 1.6 Reflectivity .................................................................................................................6 1.7 Mounting ....................................................................................................................6 2 List of Current Signs & Plate .................................................................................................7 3 Mandatory or Hazard signs and notice plates .....................................................................8 3.1 ‘STOP’ sign................................................................................................................9 3.2 'DO NOT PROCEED WITHOUT AUTHORITY’ sign .................................................9 3.3 ‘ELECTRIC TRAINS STOP’ signs...........................................................................10 3.4 ‘PANTOGRAPH DOWN’ sign..................................................................................10 3.5 ‘ELECTRIC TRAIN POINTS CLEARANCE’ sign ....................................................11 3.6 ‘BERTH’ sign ...........................................................................................................12 3.7 ‘ELECTRIC TRAIN PROHIBITION’ signs................................................................12 3.8 ‘DERAIL’ sign...........................................................................................................13 3.9 ‘CATCH POINT’ sign ...............................................................................................13 3.10 ‘BLOCK JOINT’ sign................................................................................................14 3.11 ‘LIMIT OF SHUNT’ sign...........................................................................................14 4 Safeworking instruction signs.............................................................................................15 4.1 Prohibitive signs.......................................................................................................15 4.2 Semi –automatic signal sign....................................................................................15 4.3 Automatic signal sign...............................................................................................16 4.4 Slip signs .................................................................................................................16 4.5 Distant signal signs..................................................................................................17 4.6 ‘BEGIN’ and ‘END’ single light indication signs.......................................................18 4.7 Tonnage instruction signs........................................................................................18 4.8 Start Alert Altered Aspect Sequence signs..............................................................19 4.9 End Alert Altered Aspect Sequence signs...............................................................19 4.10 Multi-SPAD Signal Alert signs .................................................................................20 4.11 Signal Ahead signs ..................................................................................................21 5 Miscellaneous notice signs .................................................................................................22 5.1 Advisory speed signs...............................................................................................22 5.2 Special speed sign metropolitan area .....................................................................23 5.3 Yard Limit signs .......................................................................................................24 5.4 Repeat signal plate ..................................................................................................24 5.5 Distant signal plate ..................................................................................................25 5.6 Co-acting signal sign ...............................................................................................25 5.7 Indicator signal sign.................................................................................................25 5.8 Signal Identification plates identified by line and distance ......................................26 5.9 Signal Identification plates identified by controlling lever number...........................27 © RailCorp Page 3 of 38 Issued 6 November 2012 UNCONTROLLED WHEN PRINTED Version 1.6 RailCorp Engineering Specification — Signals — Equipment Specification SIGNALLING SIGNs and Instruction Plates SPG 1210 5.10 Shunt Signal Identification plates identified by line and distance............................27 5.11 Signal Building, Cabinet & Location ID Plate ..........................................................28 5.12 Gantry Cage Signal Identification Plate...................................................................28 5.13 Automatic signal sign...............................................................................................28 5.14 Warning Light Nameplate ........................................................................................29 5.15 Location sign............................................................................................................30 5.16 Trackside: Track Circuit Equipment Label...............................................................31 5.17 Guards Indicator Plate.............................................................................................31 5.18 Road users signs.....................................................................................................32 5.18.1 “Railway Crossing” ...................................................................................32 5.18.2 “X Tracks”.................................................................................................32 5.18.3 “Railway Crossing” ...................................................................................32 5.18.4 “X Tracks”.................................................................................................33 5.18.5 “Stop on Red Signal”................................................................................33 5.18.6 “Stop Here on Red Signal” .......................................................................33
Load more

Recommended publications
  • Operation of Points
    9100-000-007 Safeworking Rules and Procedures PUBLIC TRANSPORT AUTHORITY SAFEWORKING RULES AND PROCEDURES 9012 OPERATION OF POINTS 9012 Operation of Points Rev1.00 Date: 01 November 15 Page 1 of 18 9100-000-007 Safeworking Rules and Procedures CONTENTS 1. Purpose ................................................................................................................. 3 2. General .................................................................................................................. 3 3. Setting Points ........................................................................................................ 4 3.1. Indications of Points Setting ......................................................................... 4 3.2. Restoration of Points .................................................................................... 4 4. Movement over Points ........................................................................................... 5 4.1. Rail Traffic .................................................................................................... 5 4.2. Competent Workers ..................................................................................... 5 4.3. Trailing Points .............................................................................................. 5 5. Damaged Points .................................................................................................... 6 6. Failed Electrically Operated Points ....................................................................... 6
    [Show full text]
  • AMS Project Specifications: AMS Trackside Design Guideline
    Reference material AMS Project Specifications: AMS Trackside Design Guideline This document is published as reference material to support the implementation of Automatic Train Protection as part of the roll out of the Advanced Train Control Migration System project. The content described might be of assistance to individuals and organisations performing work on NSW Rail Assets. When reading this document, any inconsistencies with Transport for NSW Network Standards shall be raised with the Asset Standards Authority (ASA) for clarification. This document does not comply with accessibility requirements (WCAG 2.0). If you are having trouble accessing information in these documents, please contact the ASA. Authorised by: Chief Engineer, Asset Standards Authority Published: November 2018 Important message This document is developed solely and specifically for use on the rail network owned or managed by the NSW Government and its agencies. It is not suitable for any other purpose. You must not use or adapt it or rely upon it in any way unless you are authorised in writing to do so by a relevant NSW Government agency. If this document forms part of a contract with, or is a condition of approval by, a NSW Government agency, use of the document is subject to the terms of the contract or approval. This document is published for information only and its content may not be current. AMS PROJECT SPECIFICATIONS: AMS TRACKSIDE DESIGN GUIDELINE DeskSite Reference: 5188811 only Principle – Applicable to Transport Projects AMS Program Quality Management
    [Show full text]
  • Network Safeworking Rules and Procedures
    Network Safeworking Rules and Procedures Clipping Points Procedure Number: 9000 Version 1.0, 31 March 2016 Clipping Points Procedure Number: 9000 Document Control Identification Document title Number Version Date 9000 – Clipping Points 1.0 31 March 2016 Document History Reasons for and Publication version Effective date Page(s) affected extent of change(s) 9000 – Clipping Points 4 May 2016 Authorisation Adam Sidebottom Rail Safety Manager Brookfield Rail 31 March 2016 DISTRIBUTION AND CHANGE: Brookfield Rail maintains the master for this document and publishes the current version of the Brookfield Rail website. Any changes to the content of this publication require the version number to be updated. Changes to this publication must be approved according to the procedure for developing Brookfield Rail products. To view the latest version of this document visit www.brookfieldrail.com 9000 Clipping points, Version 1.0, 31 March 2016 UNCONTROLLED WHEN PRINTED Table of Contents Glossary for this Procedure ....................................................................................... 4 Purpose ......................................................................................................... 5 General .......................................................................................................... 5 Fitting a Points Clip ........................................................................................... 6 3.1. Competent Worker ...................................................................................................
    [Show full text]
  • Working of Level Crossings - Rules 1 to 11
    Section 9 Working of Level Crossings - Rules 1 to 11 Applicability VIC Publication Requirement External Only Document Status Issue/Revision # Effective from 1.2 04 September 2011 2.0 04 October 2015 © Australian Rail Track Corporation Limited (ARTC) Disclaimer This document is uncontrolled when printed. Authorised users of this document should visit ARTC’s website (www.artc.com.au) to access the latest version of this document. Section 9 Working of Level Crossings - Rules 1 to 11 TA20 – ARTC Code of Practice for the Victorian Main Line Operations 9. Table of Contents 1. Working of Level Crossings .............................................................................................................. 9-5 a. Flashing Light Signals at Level Crossings ................................................................................. 9-5 b. Boom Barriers at Level Crossings.............................................................................................. 9-5 c. Test Switch for Boom Barrier ..................................................................................................... 9-5 d. Testing Flashing Lights, Bells and Boom Barriers ..................................................................... 9-6 e. Defective Flashing Lights and Boom Barriers ............................................................................ 9-6 f. Boom Barriers Remain in Lowered Position .............................................................................. 9-6 g. Communication Available at Level Crossing .............................................................................
    [Show full text]
  • FLH Project Development and Design Manual, Chpt. 9
    CHAPTER 9 - HIGHWAY DESIGN TABLE OF CONTENTS Page 9.1 GENERAL ................................................................. 9-1 A. Role of the Designer B. Design Standards 1. Policy 2. Design Exceptions 3. Mitigating Design Exceptions C. Computer Aided Design and Drafting (CADD) 9.2 GUIDANCE AND REFERENCES ............................................. 9-8 9.3 INFORMATION GATHERING .............................................. 9-10 A. Design Study B. Surveying and Mapping C. Accident Data D. Existing Plans E. Agency Contacts 9.4 PS&E DEVELOPMENT .................................................... 9-13 A. Geometric Design ........................................................ 9-13 1. Aesthetic Consideration in Highway Design 2. Horizontal and Vertical Alignment Relationship 3. Establish Control Points 4. Horizontal Alignment 5. Vertical Alignment 6. Sight Distance 7. Geometric Cross Section a. Pavement Structure b. Profile Grade Location and Cross Slope c. Lane and Shoulder Widths d. Foreslopes e. Roadway Ditches f. Cut and Fill Slopes g. Rock Cut Slopes h. Serrated Slopes I. Slope Rounding and Clearing Limits 8. Miscellaneous Roadway Widening 9. RRR Considerations i TABLE OF CONTENTS 9.4 PS&E DEVELOPMENT (continued) Page B. Intersection Design ....................................................... 9-58 1. Intersection Types 2. Design Vehicle 3. Alignment 4. Sight Distance 5. Channelization 6. Traffic Islands 7. Left-Turn Lanes 8. Right-Turn Lanes C. Earthwork Design ........................................................ 9-71 1. Clearing and Grubbing 2. Removal of Structures and Obstructions 3. Classification of Roadway Excavation 4. Shrink and Swell Factors 5. Design Cut and Fill Slopes 6. Slides 7. Balancing Earthwork 8. Haul 9. Mass Diagram 10. Computing Structural Excavation Quantities 11. Subgrade Treatment 12. Roadway Obliteration 13. Design Steps Using IHDS D. Earth Retaining Structures ................................................. 9-78 1. Design considerations a. Determination of Need b.
    [Show full text]
  • Finished Vehicle Logistics by Rail in Europe
    Finished Vehicle Logistics by Rail in Europe Version 3 December 2017 This publication was prepared by Oleh Shchuryk, Research & Projects Manager, ECG – the Association of European Vehicle Logistics. Foreword The project to produce this book on ‘Finished Vehicle Logistics by Rail in Europe’ was initiated during the ECG Land Transport Working Group meeting in January 2014, Frankfurt am Main. Initially, it was suggested by the members of the group that Oleh Shchuryk prepares a short briefing paper about the current status quo of rail transport and FVLs by rail in Europe. It was to be a concise document explaining the complex nature of rail, its difficulties and challenges, main players, and their roles and responsibilities to be used by ECG’s members. However, it rapidly grew way beyond these simple objectives as you will see. The first draft of the project was presented at the following Land Transport WG meeting which took place in May 2014, Frankfurt am Main. It received further support from the group and in order to gain more knowledge on specific rail technical issues it was decided that ECG should organise site visits with rail technical experts of ECG member companies at their railway operations sites. These were held with DB Schenker Rail Automotive in Frankfurt am Main, BLG Automotive in Bremerhaven, ARS Altmann in Wolnzach, and STVA in Valenton and Paris. As a result of these collaborations, and continuous research on various rail issues, the document was extensively enlarged. The document consists of several parts, namely a historical section that covers railway development in Europe and specific EU countries; a technical section that discusses the different technical issues of the railway (gauges, electrification, controlling and signalling systems, etc.); a section on the liberalisation process in Europe; a section on the key rail players, and a section on logistics services provided by rail.
    [Show full text]
  • Rule Book Issue 09/13
    RULE BOOK ISSUE 09/13 I, the undersigned, acknowledge receipt of this publication. I undertake to familiarise myself with any alterations which apply to me. FULL NAME (CAPITALS) _____________________ STAFF NUMBER _________ GRADE ___________________________________ LOCATION ________________________________ SIGNATURE _______________________________ DATE RECEIVED ___________________________ Please hand this form to your Manager/ Supervisor on completion RULE BOOK To operate from 5th January 2002 (Reprinted 24th November 2007) This Rule Book contains Sections A to U REISSUE OF RULE BOOK, SECTIONS A TO U REPLACEMENT PAGES • the enclosed pages (Issue 11/07) must be inserted in your Rule Book and all existing pages must be discarded • new or amended items are indicated by a vertical black line in the margin • a short vertical black line against a space indicates that an item has been deleted • vertical black lines are not used in Sections Q or Z since these sections are new ELECTRIFIED LINES • a new Section is being introduced (see Section Z) concerning electrified lines • this Section (which is issued separately) is issued to all employees having duties on or near electrified lines • it replaces, in part, the Electrified Lines Instructions issued by Irish Rail and the instructions concerning such lines in Northern Ireland Railways, Rule Book Appendix 11 • the instructions concerning electrified lines in Section B have been deleted (see Section Z) PERSONAL TRACK SAFETY • the definition of walking is amended to apply only when walking ALONE on
    [Show full text]
  • Points SDS 14
    Discipline Engineering Standard –NSW Category Signalling Title Points Reference Number SDS 14 –(RIC Standard: SC 00 13 01 14 SP) Document Control Status Date Prepared Reviewed Endorsed Approved GM Standards and Standards Infrastructure Safety Systems Engineer Strategy & Committee Issue 1 Mar 05 Performance Revision 2 Refer to Refer to minutes Reference H Olsen M Owens of meeting Number 12/08/04 Engineering Standard –NSW Signalling SDS 14 Points DISCLAIMER Australian Rail Track Corporation has used its best endeavors to ensure that the content, layout and text of this document is accurate, complete and suitable for its stated purpose. It makes no warranties, express or implied, that compliance with the contents of this document shall be sufficient to ensure safe systems of work or operation. Australian Rail Track Corporation will not be liable to pay compensation in respect of the content or subsequent use of this document for any other purpose than its stated purpose or for any purpose other than that for which it was prepared except where it can be shown to have acted in bad faith or there has been willful default. DOCUMENT APPROVAL The technical content of this document has been approved by the relevant ARTC engineering authority and has also been endorsed by the ARTC Safety Committee. DOCUMENT SUPPLY and CONTROL The Primary Version of this document is the electronic version that is available and accessible on the Australian Rail Track Corporation Internet and Intranet website. It is the document user’s sole responsibility to ensure that copies are checked for currency against the Primary Version prior to its use.
    [Show full text]
  • Geographic Data for ATP
    Reference material ATP Project Specifications – Geographic Data for ATP This document is published as reference material to support the implementation of Automatic Train Protection as part of the roll out of the Advanced Train Control Migration System project. The content described might be of assistance to individuals and organisations performing work on NSW Rail Assets. When reading this document, any inconsistencies with Transport for NSW Network Standards shall be raised with the Asset Standards Authority (ASA) for clarification. This document does not comply with accessibility requirements (WCAG 2.0). If you are having trouble accessing information in these documents, please contact the ASA. Authorised by: Chief Engineer, Asset Standards Authority Published: November 2018 Important message This document is developed solely and specifically for use on the rail network owned or managed by the NSW Government and its agencies. It is not suitable for any other purpose. You must not use or adapt it or rely upon it in any way unless you are authorised in writing to do so by a relevant NSW Government agency. If this document forms part of a contract with, or is a condition of approval by, a NSW Government agency, use of the document is subject to the terms of the contract or approval. This document is published for information only and its content may not be current. ATP PROJECT SPECIFICATIONS Infrastructure & Services: ATP Program Project type: Major ATP PROJECT SPECIFICATIONS GEOGRAPHIC DATA FOR ATP DeskSite Reference: 2741164 Guideline
    [Show full text]
  • Action Plan for the Deployment of Intelligent Transport Systems (ITS) in the Czech Republic Until 2020 (With the Prospect of 2050)
    Action Plan for the Deployment of Intelligent Transport Systems (ITS) in the Czech Republic until 2020 (with the Prospect of 2050) Original text is written in Czech language Czech version was translated into English on 1st June 2016 Contents 1 Introduction ............................................................................................................................... 6 2 Preparation of the ITS Action Plan, Cooperation with Partners ........................................ 11 3 Opening ................................................................................................................................... 13 3.1 The Current State of ITS Deployment in the Czech Republic .......................................... 15 3.1.1 Road Transport ............................................................................................................. 15 3.1.2 Public Passenger Transport ......................................................................................... 19 3.1.3 Accessibility of Public Passenger Transport Services to People with Specific Needs 22 3.1.4 Railway Transport ......................................................................................................... 23 3.1.4.1 Railway Operator .................................................................................................. 25 3.1.4.2 Railway Passenger Transport Operator ............................................................... 27 3.1.4.3 Railway Freight Transport Operator ....................................................................
    [Show full text]
  • Signalling Symbols 2011.Pdf
    Ref: NR/L2/SIG/11201 – Mod A17 Issue: 5 Date: 03/09/2011 Compliance date: 03/09/2011 Level 2 Signalling Design: Module A17 - Symbols for Plans and Sketches used in Signalling Applications Endorsement and Authorisation For endorsement and authorisation, please refer to NR/L2/SIG/11201 This document is the property of Network Rail. It shall not be reproduced in whole or part nor disclosed to a third party without the written permission of Network Rail. Copyright 2011 Network Rail. Uncontrolled copy once printed from its electronic source. Published and Issued by Network Rail, Kings Place, 90 York Way, London. N1 9AG. [[[ Ref: NR/L2/SIG/11201 – Mod A17 Issue: 5 Date: 03/09/2011 Compliance date: 03/09/2011 Issue record Issue Date Comments 4 June 2011 NR/L3/SIG/11004 incorparated into NR/L2/SIG/11201 5 03/09/2011 Amended references due to withdrawal of NR/L3/SIG/30018 Compliance This Network Rail standard is mandatory and shall be complied with by Network Rail and its contractors if applicable from 03/09/2011. When this standard is implemented, it is permissible for all projects that have formally completed GRIP Stage 3 (Option Selection) to continue to comply with the Issue of any relevant Network Rail Standards current when GRIP Stage 3 was completed and not to comply with requirements contained herein, unless stipulated otherwise in the scope of this standard. Disclaimer In issuing this document for its stated purpose, Network Rail makes no warranties, express or implied, that compliance with all or any documents it issues is sufficient on its own to confirm safe systems of work or operation.
    [Show full text]
  • CP-TS-963 Issue: 1 Date: 04/09/07 Page: 1 of 90
    CODE OF PRACTICE - VOLUME TWO - TRAIN SYSTEM [CP2] TRANSADELAIDE INFRASTRUCTURE SERVICES PART 13: POINTS AND CROSSINGS DOC. NO. CP-TS-963 Issue: 1 Date: 04/09/07 Page: 1 of 90 TRACK AND CIVIL INFRASTRUCTURE CODE OF PRACTICE VOLUME TWO - TRAIN SYSTEM [CP2] POINTS AND CROSSINGS C:\Users\lettonla\Desktop\CPTS963-points_crossings.doc © 2004 No part of this document may be reproduced without prior written consent from TransAdelaide CODE OF PRACTICE - VOLUME TWO - TRAIN SYSTEM [CP2] TRANSADELAIDE INFRASTRUCTURE SERVICES PART 13: POINTS AND CROSSINGS DOC. NO. CP-TS-963 Issue: 1 Date: 04/09/07 Page: 2 of 90 TABLE OF CONTENTS Page No. 1.0 PURPOSE AND SCOPE .......................................................................................... 3 1.1 Purpose .................................................................................................................... 3 1.2 Principles .................................................................................................................. 3 1.3 Scope ....................................................................................................................... 3 1.4 References ............................................................................................................... 3 2.0 DESIGN OF POINTS AND CROSSINGS ................................................................. 4 2.1 Standard track components ...................................................................................... 4 2.2 Design criteria for points and crossings assemblies ................................................
    [Show full text]