DOCSLIB.ORG

SAFETY DATA SHEET Revision Date 15.09.2021 According to Regulation (EC) No

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
SAFETY DATA SHEET Revision Date 15.09.2021 According to Regulation (EC) No Version 6.6 SAFETY DATA SHEET Revision Date 15.09.2021 according to Regulation (EC) No. 1907/2006 Print Date 24.09.2021 GENERIC EU MSDS - NO COUNTRY SPECIFIC DATA - NO OEL DATA SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifiers Product name : Lithium borohydride Product Number : 222356 Brand : Aldrich REACH No. : A registration number is not available for this substance as the substance or its uses are exempted from registration, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline. CAS-No. : 16949-15-8 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses : Laboratory chemicals, Manufacture of substances 1.3 Details of the supplier of the safety data sheet Company : Sigma-Aldrich Inc. 3050 SPRUCE ST ST. LOUIS MO 63103 UNITED STATES Telephone : +1 314 771-5765 Fax : +1 800 325-5052 1.4 Emergency telephone Emergency Phone # : 800-424-9300 CHEMTREC (USA) +1-703- 527-3887 CHEMTREC (International) 24 Hours/day; 7 Days/week SECTION 2: Hazards identification 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 Substances and mixtures which in contact with water emit flammable gases (Category 1), H260 Acute toxicity, Oral (Category 3), H301 Skin corrosion (Sub-category 1B), H314 For the full text of the H-Statements mentioned in this Section, see Section 16. Aldrich- 222356 Page 1 of 8 The life science business of Merck operates as MilliporeSigma in the US and Canada 2.2 Label elements Labelling according Regulation (EC) No 1272/2008 Pictogram Signal word Danger Hazard statement(s) H260 In contact with water releases flammable gases which may ignite spontaneously. H301 Toxic if swallowed. H314 Causes severe skin burns and eye damage. Precautionary statement(s) P231 + P232 Handle and store contents under inert gas. Protect from moisture. P260 Do not breathe dusts or mists. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P304 + P340 + P310 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/ doctor. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazard information (EU) EUH014 Reacts violently with water. Reduced Labeling (<= 125 ml) Pictogram Signal word Danger Hazard statement(s) H301 Toxic if swallowed. H314 Causes severe skin burns and eye damage. Precautionary statement(s) P260 Do not breathe dusts or mists. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P304 + P340 + P310 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/ doctor. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazard information (EU) EUH014 Reacts violently with water. Aldrich- 222356 Page 2 of 8 The life science business of Merck operates as MilliporeSigma in the US and Canada 2.3 Other hazards This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. SECTION 3: Composition/information on ingredients 3.1 Substances Formula : H4BLi Molecular weight : 21,78 g/mol CAS-No. : 16949-15-8 EC-No. : 241-021-7 Component Classification Concentration Lithium tetrahydroborate CAS-No. 16949-15-8 Water-react 1; Acute Tox. <= 100 % EC-No. 241-021-7 3; Skin Corr. 1B; H260, H301, H314 For the full text of the H-Statements mentioned in this Section, see Section 16. SECTION 4: First aid measures 4.1 Description of first-aid measures No data available 4.2 Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 4.3 Indication of any immediate medical attention and special treatment needed No data available SECTION 5: Firefighting measures 5.1 Extinguishing media Suitable extinguishing media Extinguishing media: sodium chloride/hydrogen carbonate or lime stone. Unsuitable extinguishing media Carbon dioxide (CO2) Water 5.2 Special hazards arising from the substance or mixture Borane/boron oxides Lithium oxides Not combustible. 5.3 Advice for firefighters No data available 5.4 Further information No data available Aldrich- 222356 Page 3 of 8 The life science business of Merck operates as MilliporeSigma in the US and Canada SECTION 6: Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures For personal protection see section 8. 6.2 Environmental precautions No data available 6.3 Methods and materials for containment and cleaning up No data available 6.4 Reference to other sections For disposal see section 13. SECTION 7: Handling and storage 7.1 Precautions for safe handling For precautions see section 2.2. 7.2 Conditions for safe storage, including any incompatibilities Moisture sensitive. Storage class Storage class (TRGS 510): 4.3: Hazardous materials, which set free flammable gases upon contact with water 7.3 Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated SECTION 8: Exposure controls/personal protection 8.1 Control parameters Ingredients with workplace control parameters 8.2 Exposure controls Personal protective equipment Skin protection This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Aldrich- 222356 Page 4 of 8 The life science business of Merck operates as MilliporeSigma in the US and Canada Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L Control of environmental exposure Prevent product from entering drains. SECTION 9: Physical and chemical properties 9.1 Information on basic physical and chemical properties a) Appearance Form: crystalline Color: white b) Odor No data available c) Odor Threshold No data available d) pH No data available e) Melting Melting point/range: 275 °C - dec. point/freezing point f) Initial boiling point No data available and boiling range g) Flash point Not applicable h) Evaporation rate No data available i) Flammability (solid, The product is not flammable. gas) j) Upper/lower No data available flammability or explosive limits k) Vapor pressure No data available l) Vapor density No data available m) Density 0,666 g/cm3 at 25 °C - lit. Relative density No data available n) Water solubility No data available o) Partition coefficient: No data available n-octanol/water p) Autoignition No data available temperature q) Decomposition No data available temperature r) Viscosity Viscosity, kinematic: No data available Viscosity, dynamic: No data available s) Explosive properties No data available t) Oxidizing properties none 9.2 Other safety information No data available Aldrich- 222356 Page 5 of 8 The life science business of Merck operates as MilliporeSigma in the US and Canada SECTION 10: Stability and reactivity 10.1 Reactivity No data available 10.2 Chemical stability No data available 10.3 Possibility of hazardous reactions Risk of ignition or formation of inflammable gases or vapours with: Water Hydrogen chloride gas mineral acids Methanol Exothermic reaction with: Oxidizing agents 10.4 Conditions to avoid No data available 10.5 Incompatible materials No data available 10.6 Hazardous decomposition products In the event of fire: see section 5 SECTION 11: Toxicological information 11.1 Information on toxicological effects Acute toxicity LD50 Oral - Mouse - 87,8 mg/kg Remarks: Behavioral:Somnolence (general depressed activity). Behavioral:Convulsions or effect on seizure threshold. Gastrointestinal:Ulceration or bleeding from stomach. LC50 Inhalation - Mammal - 80 mg/m3 Dermal: No data available Skin corrosion/irritation No data available Serious eye damage/eye irritation No data available Respiratory or skin sensitization No data available Germ cell mutagenicity No data available Carcinogenicity No data available Reproductive toxicity Lithium and its compounds are possible teratogens by analogy to lithium carbonate which has equivocal human teratogenic data and positive animal teratogenic data. Specific target organ toxicity - single exposure Aldrich- 222356 Page 6 of 8 The life science
Load more

Recommended publications
  • Reductions and Reducing Agents
    REDUCTIONS AND REDUCING AGENTS 1 Reductions and Reducing Agents • Basic definition of reduction: Addition of hydrogen or removal of oxygen • Addition of electrons 9:45 AM 2 Reducible Functional Groups 9:45 AM 3 Categories of Common Reducing Agents 9:45 AM 4 Relative Reactivity of Nucleophiles at the Reducible Functional Groups In the absence of any secondary interactions, the carbonyl compounds exhibit the following order of reactivity at the carbonyl This order may however be reversed in the presence of unique secondary interactions inherent in the molecule; interactions that may 9:45 AM be activated by some property of the reacting partner 5 Common Reducing Agents (Borohydrides) Reduction of Amides to Amines 9:45 AM 6 Common Reducing Agents (Borohydrides) Reduction of Carboxylic Acids to Primary Alcohols O 3 R CO2H + BH3 R O B + 3 H 3 2 Acyloxyborane 9:45 AM 7 Common Reducing Agents (Sodium Borohydride) The reductions with NaBH4 are commonly carried out in EtOH (Serving as a protic solvent) Note that nucleophilic attack occurs from the least hindered face of the 8 carbonyl Common Reducing Agents (Lithium Borohydride) The reductions with LiBH4 are commonly carried out in THF or ether Note that nucleophilic attack occurs from the least hindered face of the 9:45 AM 9 carbonyl. Common Reducing Agents (Borohydrides) The Influence of Metal Cations on Reactivity As a result of the differences in reactivity between sodium borohydride and lithium borohydride, chemoselectivity of reduction can be achieved by a judicious choice of reducing agent. 9:45 AM 10 Common Reducing Agents (Sodium Cyanoborohydride) 9:45 AM 11 Common Reducing Agents (Reductive Amination with Sodium Cyanoborohydride) 9:45 AM 12 Lithium Aluminium Hydride Lithium aluminiumhydride reacts the same way as lithium borohydride.
    [Show full text]
  • Materials Chemistry Materials Chemistry
    Materials Chemistry Materials Chemistry by Bradley D. Fahlman Central Michigan University, Mount Pleasant, MI, USA A C.I.P. Catalogue record for this book is available from the Library of Congress. ISBN 978-1-4020-6119-6 (HB) ISBN 978-1-4020-6120-2 (e-book) Published by Springer, P.O. Box 17, 3300 AA Dordrecht, The Netherlands. www.springer.com Printed on acid-free paper First published 2007 Reprinted 2008 All Rights Reserved © 2008 Springer Science + Business Media B.V. No part of this work may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, microfilming, recording or otherwise, without written permission from the Publisher, with the exception of any material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. TABLE OF CONTENTS Preface ............................................................ ix Chapter 1. WHAT IS MATERIALS CHEMISTRY? .................... 1 1.1 HISTORICAL PERSPECTIVES . ............................ 2 1.2 CONSIDERATIONS IN THE DESIGN OF NEW MATERIALS . 5 1.3 DESIGN OF NEW MATERIALS THROUGH A “CRITICAL THINKING”APPROACH................................... 6 Chapter 2. SOLID-STATE CHEMISTRY ............................ 13 2.1 AMORPHOUS VS.CRYSTALLINESOLIDS.................. 13 2.2 TYPES OF BONDING IN SOLIDS . ..................... 14 2.2.1 IonicSolids......................................... 14 2.2.2 Metallic Solids . ................................ 16 2.2.3 Molecular Solids. ................................ 19 2.2.4 CovalentNetworkSolids.............................. 21 2.3 THECRYSTALLINESTATE................................ 21 2.3.1 Crystal Growth Techniques . ..................... 23 2.3.2 TheUnitCell ....................................... 25 2.3.3 CrystalLattices...................................... 28 2.3.4 CrystalImperfections................................. 41 2.3.5 Phase-Transformation Diagrams. ..................... 47 2.3.6 Crystal Symmetry and Space Groups .
    [Show full text]
  • Selective Reduction of Halides with Lithium Borohydride in The
    DAEHAN HWAHAK HWOEJEE (.Journal of the Korean Chemical Society) Vol. 27, No. 1. 1983 Printed in the Republic of Korea 수소화 붕소리튬을 이용한 다중작용기를 가진 화합물에서 할라이드의 선택환원 趙炳泰•尹能民十 서강대학교 이공대학 화학과 (1982. 8. 9 접수) Selective Reduction of Halides with Lithium Borohydride in the Multifunctional Compounds Byung Tae Cho and Nung Min Yoont Department of Chemistry, Sogang University, Seoul 121, Korea, (Received Aug. 9, 1982) 요 약. 한 분자내에 클로로, 니르로, 에스테르 및 니트릴기를 포함하는 할로겐 화합물에서 수소 화붕소리튬을 이용한 할로겐의 선택환원이 논의되었다. 브로모-4-클로로부탄은 96 %의 수득율로 I-클로로부탄으로, 브롬화 />-니트로벤질은 98 %의 수득율로 A니트로 톨루엔으로 환원되었으나 요 오도프로피온산 에 틸에스테르나4-브로모부티로니트릴의 경우 선택 환원의 수득율이 낮았다. 그러나 당 량의 피리딘 존재하에서 이 반응을 시키면 프로피온산 에틸에스테르는 93%, 부티로니트릴은 88% 로서 각각 선택환원의 수득율이 향상되었다. ABSTRACT. Selective reduction of halide (Br, I ) with lithium borohydride in halogen com­ pounds containing chloro, nitro, ester and nitrile groups was achieved satisfactorily, l-bromo-4- chlorobutane was reduced to 1-chlorobutane in 96% yield and the reduction of y)-nitrobenzyl bro­ mide gave />~nitrotoluene in 98 % yield. However, the selectivity on the reduction of ethyl 3- iodopropionate and 4-bromobutyronitrile required the presence of equimolar pyridine to give good yields of ethyl propionate (93 %) and w-butyronitrile (88 %), respectively. In ^competitive reduc­ tion of 1-bromoheptane and 2-bromoheptane, lithium borohydride reduced 1-bromoheptane pre­ ferentially in the molar ratio of 93： 7. and secondary iodides, bromides, chlorides). INTRODUCTION On the other hand, it was also realized that It was reported that both lithium aluminum remark사)ly mild reducing agents, sodium boro­ hydride and lithium triethylborohydride exhi­ hydride and sodium cyanoborohydride reduced bited exceptional utility for the reduction of successfully alkyl halides in dimethyl sulfoxide alkyl halides and tosylates.1,2 However, they or hexamethyl phosphoramide.
    [Show full text]
  • 2020 Emergency Response Guidebook
    2020 A guidebook intended for use by first responders A guidebook intended for use by first responders during the initial phase of a transportation incident during the initial phase of a transportation incident involving hazardous materials/dangerous goods involving hazardous materials/dangerous goods EMERGENCY RESPONSE GUIDEBOOK THIS DOCUMENT SHOULD NOT BE USED TO DETERMINE COMPLIANCE WITH THE HAZARDOUS MATERIALS/ DANGEROUS GOODS REGULATIONS OR 2020 TO CREATE WORKER SAFETY DOCUMENTS EMERGENCY RESPONSE FOR SPECIFIC CHEMICALS GUIDEBOOK NOT FOR SALE This document is intended for distribution free of charge to Public Safety Organizations by the US Department of Transportation and Transport Canada. This copy may not be resold by commercial distributors. https://www.phmsa.dot.gov/hazmat https://www.tc.gc.ca/TDG http://www.sct.gob.mx SHIPPING PAPERS (DOCUMENTS) 24-HOUR EMERGENCY RESPONSE TELEPHONE NUMBERS For the purpose of this guidebook, shipping documents and shipping papers are synonymous. CANADA Shipping papers provide vital information regarding the hazardous materials/dangerous goods to 1. CANUTEC initiate protective actions. A consolidated version of the information found on shipping papers may 1-888-CANUTEC (226-8832) or 613-996-6666 * be found as follows: *666 (STAR 666) cellular (in Canada only) • Road – kept in the cab of a motor vehicle • Rail – kept in possession of a crew member UNITED STATES • Aviation – kept in possession of the pilot or aircraft employees • Marine – kept in a holder on the bridge of a vessel 1. CHEMTREC 1-800-424-9300 Information provided: (in the U.S., Canada and the U.S. Virgin Islands) • 4-digit identification number, UN or NA (go to yellow pages) For calls originating elsewhere: 703-527-3887 * • Proper shipping name (go to blue pages) • Hazard class or division number of material 2.
    [Show full text]
  • Metal Borohydrides and Derivatives
    Metal borohydrides and derivatives - synthesis, structure and properties - Mark Paskevicius,a Lars H. Jepsen,a Pascal Schouwink,b Radovan Černý,b Dorthe B. Ravnsbæk,c Yaroslav Filinchuk,d Martin Dornheim,e Flemming Besenbacher,f Torben R. Jensena * a Center for Materials Crystallography, Interdisciplinary Nanoscience Center (iNANO), and Department of Chemistry, Aarhus University, Langelandsgade 140, DK-8000 Aarhus C, Denmark b Laboratory of Crystallography, DQMP, University of Geneva, 1211 Geneva, Switzerland c Department of Physics, Chemistry and Pharmacy, University of Southern Denmark, Campusvej 55, 5230 Odense M, Denmark d Institute of Condensed Matter and Nanosciences, Université catholique de Louvain, Place L. Pasteur 1, B-1348 Louvain-la-Neuve, Belgium e Helmholtz-Zentrum Geesthacht, Department of Nanotechnology, Max-Planck-Straße 1, 21502 Geesthacht, Germany f Interdisciplinary Nanoscience Center (iNANO) and Department of Physics and Astronomy, DK- 8000 Aarhus C, Denmark * Corresponding author: [email protected] Contents Abstract 1. Introduction 2. Synthesis of metal borohydrides and derivatives 2.1 Solvent-based synthesis of monometallic borohydrides 2.2 Trends in the mechanochemical synthesis of metal borohydrides 2.3 Trends in the mechanochemical synthesis of metal borohydride-halides 2.4 Mechanochemical reactions, general considerations 2.5 Mechanical synthesis in different gas atmosphere 2.6 Single crystal growth of metal borohydrides 2.7 Synthesis of metal borohydrides with neutral molecules 3. Trends in structural chemistry of metal borohydrides 3.1 Monometallic borohydrides, the s-block – pronounced ionic bonding 3.2 Monometallic borohydrides with the d- and f-block 3.3 Strongly covalent molecular monometallic borohydrides 3.4 Bimetallic s-block borohydrides 3.5 Bimetallic d- and f-block borohydrides 3.6 Bimetallic p-block borohydrides 3.7 Tri-metallic borohydrides 3.8 General trends in the structural chemistry of metal borohydrides 3.9 Comparisons between metal borohydrides and metal oxides 4.
    [Show full text]
  • Systematic Degradation of Peptides from the Carboxyl End
    Vol. 6o PEPTIDE ESTER REDUCTION 173 from solution. The complexes with the toluene-p- 2. Quantitative reduction of the ester groups sulphonyl derivatives are particularly insoluble. with lithium aluminium hydride (LiAlH4) was Where homogeneous reaction mixtures are possible, impossible in many cases owing to the formation of reduction of the peptide carbonyl becomes con- insoluble aluminium complexes. siderable even at low temperatures, thus presenting 3. Both LiAlH4 and aluminium hydride (ARH3) a serious drawback to the use of LiAlH4 in the reduce the peptide bond. Greater control of the peptide and protein field. reaction, however, is possible with the latter A solution of AlH3 in tetrahydrofuran ivi the reagent. presence of a little aluminium chloride has been 4. Lithium borohydride (LiBH4) is the most found useful for the preparation of a number of suitable reagent for reducing peptide esters. ,-hydroxyamides in good yield. Best results are Homogeneous reaction mixtures are usually ob- obtained when the reducing solution is added to the tained and the minimum ofside reactions take place. ester gradually. In the preparation of ,B-hydroxy- I wish to express my thanks to Dr A. C. Chibnall, F.R.S., amides from the ethyl esters of glycylglycine and for his advice and interest in this work which was carried out L-leucylglycylglycine using this reagent at a temper- during tenure of an Imperial Chemical Industries Research ature of - 40° losses due to amide reduction Fellowship. amounted to 5-10%. LiBH4 is the best of the three reducing agents REFERENCES described, in that most of the peptide derivatives Bailey, J.
    [Show full text]
  • Review of Multivalent Metal Ion Transport in Inorganic and Solid Polymer Electrolytes
    batteries Review Review of Multivalent Metal Ion Transport in Inorganic and Solid Polymer Electrolytes Lauren F. O’Donnell and Steven G. Greenbaum * Department of Physics and Astronomy, Hunter College of the City University of New York, New York, NY 10065, USA; [email protected] * Correspondence: [email protected]; Tel.:+1-212-772-4973 Abstract: The lithium ion battery, with its high energy density and low reduction potential, continues to enchant researchers and dominate the landscape of energy storage systems development. However, the demands of technology in modern society have begun to reveal limitations of the lithium energy revolution. A combination of safety concerns, strained natural resources and geopolitics have inspired the search for alternative energy storage and delivery platforms. Traditional liquid electrolytes prove precarious in large scale schemes due to the propensity for leakage, the potential for side reactions and their corrosive nature. Alternative electrolytic materials in the form of solid inorganic ion conductors and solid polymer matrices offer new possibilities for all solid state batteries. In addition to the engineering of novel electrolyte materials, there is the opportunity to employ post-lithium chemistries. Utility of multivalent cation (Ca2+, Mg2+, Zn2+ and Al3+) transport promises a reduction in cost and increase in safety. In this review, we examine the current research focused on developing solid electrolytes using multivalent metal cation charge carriers and the outlook for their application in all solid state batteries. Keywords: all solid state battery; multivalent metal cation conductor; solid polymer electrolyte; solid inorganic electrolyte Citation: O’Donnell, L.F.; Greenbaum, S.G. Review of Multivalent Metal Ion Transport in 1.
    [Show full text]
  • United States Patent Office Patented May 22, 1973 1
    3,734,963 United States Patent Office Patented May 22, 1973 1. 2 Salts were mixed with a hydrocarbon containing the com 3,734,963 plexing agent, the inorganic lithium salts dissolved in the INORGANIC LITHUM-AMINE COMPLEXES Arthur W. Langer, Jr., Watchung, and Thomas A. Whit reaction medium and stable complexes of the chelating ney, Linden, N.J., assignors to Esso Research and Engi agent with the lithium salt could be obtained from the neering Company reaction mixture. No Drawing. Filed Mar. 18, 1969, Ser. No. 808,328 It is well known that one of the significant factors used Int, C. C07c87/14, 87/20, 87/38 in predicting whether a reaction can be accomplished with U.S. C. 260-563 R 1. Claims a given material is whether the lattice energy of such ma terial is low enough to be overcome by the other reactant 10 So as to form a new compound. Thus, it was highly surpris ABSTRACT OF THE DISCLOSURE ing to find that the inorganic lithium salts which have Complexed inorganic lithium salts are prepared by mix significantly higher lattice energies than those of organo ing an inorganic lithium salt such as a lithium halide with lithium compounds, nevertheless can form complexes with a monomeric or polymeric organic complexing agent which the same type (and indeed many more types) of complex contains at least one nitrogen atom and at least one other 5 ing agent as those used in conjunction with the organo atom which is nitrogen, oxygen, phosphorus or sulfur. lithium compounds. The complexing agent may be nonchelating (e.g.
    [Show full text]
  • Electrosynthesis of Lithium Borohydride from Trimethyl Borate and Hydrogen Gas
    Electrosynthesis of Lithium Borohydride from Trimethyl Borate and Hydrogen Gas By James Mokaya Omweri Submitted in Partial Fulfillment of the Requirements For the Degree of Master of Science In the Chemistry Program YOUNGSTOWN STATE UNIVERSITY December, 2019 Electrosynthesis of Lithium Borohydride from Trimethyl Borate and Hydrogen Gas James Mokaya Omweri I hereby release this thesis to the public. I understand that this thesis will be made available from the OhioLINK ETD Center and the Maag Library Circulation Desk for public access. I also authorize the University or other individuals to make copies of this thesis as needed for scholarly research. Signature: James Mokaya Omweri, Student Date Approvals: Dr. Clovis A. Linkous, Thesis Advisor Date Date Dr. Sherri Lovelace-Cameron, Committee Member Date Dr. Timothy Wagner, Committee Member Date Dr. Salvatore A. Sanders, Dean of Graduate Studies Date ABSTRACT Solid state hydrogen storage is seen as the ultimate answer in realizing the hydrogen economy and minimizing our overdependence on nonrenewable fossil fuels. The use of fossil fuels has contributed negatively towards climate change, leading to a lot of future uncertainties. Alkali metal borohydrides, especially lithium borohydride, with desirable H2 storage properties such dry air stability and high gravimetric and volumetric storage densities of 18.5 wt% and 121 kg/m3, respectively, are proving to be some of the most important solid state hydrogen storage materials. However, their current cost of production is very high considering that most borohydrides are synthesized from sodium borohydride, which in turn is made from sodium hydride, NaH, and trimethyl borate, B(OCH3)3. NaH, which is a product of an energetic process, namely hydrogenation following electrodeposition of the metal from a molten salt, acts as the source of H- required for the formation of the borohydride ion.
    [Show full text]
  • WORKBOOK in CHEMISTRY (I) (Inorganic & Bioinorganic)
    1 UKRAINE NATIONAL UNIVERSITY OF LIFE AND ENVIRONMENTAL SCIENCES OF UKRAINE Department of Analytical and Bioinorganic Chemistry & Water Quality WORKBOOK in CHEMISTRY (I) (Inorganic & Bioinorganic) of student______________________________________ (Name, Surname) (group, year of study) Branch of knowledge – 10 Natural Sciences Speciality – 101 Ecology Kyiv-2019 2 УДК 546 (07) Робочий зошит призначено для виконання лабораторного практикуму з неорганічної і біонеорганічної хімії. Включає методики виконання експериментальних задач, форми протоколів аналізу, питання для самоперевірки. Рекомендовано методичною радою факультету захисту рослин, біотехнологій та екології Національного університету біоресурсів і природокористування України для спеціальності 101 – Екологія, для яких викладання ряду дисциплін проводиться англійською мовою (протокол № ___ від ________ 2020 р.). Рецензенти: д.х.н., проф. Максін В.І., НУБіП України; к.х.н., доц. Бухтіяров В.К., НУБіП України. Voitenko, L.V. Workbook in chemistry I (inorganic and bioinorganic) (Speciality 101- Ecology) / Kyiv : DDP ―Expo-druk‖. – 2020. – 241 p. Відповідальний за випуск: к.х.н., доц. Войтенко Л.В. UDC 546 (07) The workbook is intended to train in lab course of Chemistry I (Inorganic and Bioinorganic). It contains the description of experimental strategies, lab techniques, the templates of lab reports, test questions for own training. Recommended for publication by the by the Methodical board of the Plant Protection, the Biotechnologies & Ecology faculty of National University of Life and Environmental Sciences, for Speciality 101 – Ecology. Report # ___, Data ________2020. Reviewers: Doctor of Chem. Sci., Prof. Maksin V.I., NUBiP of Ukraine; Candidate of Chem. Sci., Ass. Prof. Buchtiyarov V.K., NUBiP of Ukraine. Responsible for the edition: Cand. of Chem. Sci., Ass. Prof. Voitenko L.V.
    [Show full text]
  • A New Lithium Borohydride Ammonia Borane Compound with a Novel Structure and Favorable Hydrogen Storage Properties
    international journal of hydrogen energy 37 (2012) 10750e10757 Available online at www.sciencedirect.com journal homepage: www.elsevier.com/locate/he $ LiBH4 NH3BH3: A new lithium borohydride ammonia borane compound with a novel structure and favorable hydrogen storage properties Junhong Luo a, Hui Wu b,c,**, Wei Zhou b,c, Xiangdong Kang a, Zhanzhao Fang a, Ping Wang a,* a Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016, China b NIST Center for Neutron Research, National Institute of Standards and Technology, Gaithersburg, MD 20899-6102, USA c Department of Materials Science and Engineering, University of Maryland, College Park, MD 20742-2115, USA article info abstract Article history: Mechanically milling ammonia borane and lithium borohydride in equivalent molar ratio $ Received 17 February 2012 results in the formation of a new complex, LiBH4 NH3BH3. Its structure was successfully Received in revised form determined using combined X-ray diffraction and first-principles calculations. $ 17 March 2012 LiBH4 NH3BH3 was carefully studied in terms of its decomposition behavior and reversible Accepted 8 April 2012 dehydrogenation property, particularly in comparison with the component phases. In Available online 5 May 2012 parallel to the property examination, X-ray diffraction and Fourier transformation infrared spectroscopy techniques were employed to monitor the phase evolution and bonding $ Keywords: structure changes in the reaction process. Our study found that LiBH4 NH3BH3 first $ Hydrogen storage disproportionates into (LiBH4)2 NH3BH3 and NH3BH3, and the resulting mixture exhibits Ammonia borane a three-step decomposition behavior upon heating to 450 C, totally yielding w15.7 wt% Lithium borohydride hydrogen.
    [Show full text]
  • Lithium Borohydride
    Lithium borohydride sc-252957 Material Safety Data Sheet Hazard Alert Code Key: EXTREME HIGH MODERATE LOW Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME Lithium borohydride STATEMENT OF HAZARDOUS NATURE CONSIDERED A HAZARDOUS SUBSTANCE ACCORDING TO OSHA 29 CFR 1910.1200. NFPA FLAMMABILITY4 HEALTH3 HAZARD INSTABILITY2 W SUPPLIER Company: Santa Cruz Biotechnology, Inc. Company: Santa Cruz Biotechnology, Inc. Address: Address: 2145 Delaware Ave 2145 Delaware Ave Telephone: 800.457.3801 or 831.457.3800 Santa Cruz, CA 95060 Emergency Tel: CHEMWATCH: From within the US and Canada: United States of America 877-715-9305 Telephone: 800.457.3801 or 831.457.3800 Emergency Tel: From outside the US and Canada: +800 2436 2255 Emergency Tel: ChemWatch (1-800-CHEMCALL) or call +613 9573 3112 Emergency Tel: From within the US and Canada: 877-715-9305 From outside the US and Canada: 800-2436-2255 (1-800- CHEMCALL) Or call 613-9573-3112 PRODUCT USE ! Reducing agent. Strong reducing agent used in the reduction of compounds containing ketonic, aldehydic or ester carbonyls and a nitrile group, where reduction of the carbonyl but not the nitrate is required. Used also in the determination of free carboxyl groups in proteins and peptides. SYNONYMS B-H4-Li, LiBH4, "lithium tetrahydroborate" Section 2 - HAZARDS IDENTIFICATION CHEMWATCH HAZARD RATINGS Min Max Flammability: 4 Toxicity: 3 Body Contact: 3 Min/Nil=0 Low=1 Reactivity: 2 Moderate=2 High=3 Chronic: 2 Extreme=4 CANADIAN WHMIS SYMBOLS 1 of 16 EMERGENCY OVERVIEW RISK Causes burns. Risk of serious damage to eyes. Reacts violently with water liberating extremely flammable gases.
    [Show full text]