DOCSLIB.ORG

Iron Horse Power Tools Iron Horse Power Tools

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Iron Horse Power Tools Iron Horse Power Tools SALES ENQUIRIES Tel- (03) 9727 8860 Fax- 1300 360 650 www.arlec.com.au Iron Horse Power Tools Iron Horse Power Tools Pack Pack Qty Qty ICD12V 12 Volt Cordless Drill Kit 1 IAG5-115 115mm Angle Grinder 1 Voltage 12 Volt. No load speed 0-550rpm. Power input 500 Watts. No load speed Torque settings 16. Battery capacity 1.2 Ah. 11,000rpm. Disc diameter 115mm. Spindle size 10mm keyed chuck. Charge time 3-5 hours. M14 x 2. Spindle lock. Accessories: auxiliary Accessories: 6 x s/driver bits, 1 x magnetic handle, pin spanner. holder, 6 x HSS drill bits. Packaged: Printed box Packaged: Carry case APN 93 11644 03085 0 APN 93 11644 03084 3 ICSD36K 3.6V Cordless Screwdriver Kit 1 ICS7-1200 185mm Circular Saw 1 Voltage 3.6 Volt. Charge time 3-5 hours. Power input 1200 Watts. No load speed No load speed 230rpm. Hexagonal chuck 4,500rpm. Blade diameter 184mm x 16mm x 24 o 6.35mm. Max. torque force: 1 Nm. teeth. Max. cut capacity 55mm. Bevel 45 R. Accessories: 8 x sockets, 1 x socket driver, Spindle lock. Accessories: straight guide, 24 30 x s/driver bits, 1 x magnetic holder. tooth blade, blade spanner. Packaged: Carry case Packaged: Printed box APN 93 116440 3201 4 APN 93 11644 03101 7 ID500RE 13mm Impact Drill 1 ICM355 355mm Cut Off Machine 1 Power input 500 Watts. Variable speed Power input 2000 Watts. No load speed 0-2,500rpm. Forward & Reverse. 13mm keyed 2,800rpm. Wheel diameter 355mm x 25.4mm chuck. Drilling capacity: wood-25mm, steel- Cutting capacity: 125mm round tube, 20mm 16mm, stone-13mm. Accessories: side handle, solid bar, 80mm profile. Quick release vice. & depth gauge. Spindle lock. Packaged: Printed box Packaged: Printed box APN 93 116440 3086 7 APN 93 11644 03104 8 IJ350 50mm Jigsaw 1 ICMS210 210mm Compound Mitre Saw 1 Power input 350 Watts. No load speed Power input 1,000 Watts. No load speed 2,800rpm. Max cutting capacity 55mm in 4,500rpm. Blade diameter 210mm x 25mm x 30 o o o softwood. Bevel 45 L & R. Accessories: clear teeth. Mitre 45 L & R. Bevel 45 L. Max cut blade cover, blade guide. capacity 65mm. Spindle lock. Packaged: Printed box Packaged: Printed box APN 93 11644 03083 6 APN 93 11644 03102 4 IFS135 1/3 Sheet Finishing Sander 1 ISCM255 255mm Slide Compound Mitre 1 Saw Power input 135 Watts. No load speed Power input 1500 Watts (2 Hp). No load speed 10,000opm. Pad Size 187 x 90mm. Orbit 4,600rpm. Blade diameter 255mm x 25mm x 60 o o o Diameter 1mm. Dust extraction outlet. teeth. Mitre 45 L & 45 R. Bevel 54 L. Max cut Lock on button. cap 305mm x 75mm. Spindle lock. Accessories: Packaged: Printed box material clamp, blade spanner, length stop. Packaged: Printed box APN 93 11644 03087 4 APN 93 11644 03105 5 Note: All power tools are covered by a 1 year home use replacement warranty Oct 2003/71 Arlec Australia Limited ACN 003 118 787 • Maroondah Highway, Mooroolbark, Victoria, 3138, Australia • Correspondence to: PO Box 181 Lilydale, Victoria, 3140, Australia 71 SALES ENQUIRIES Tel- (03) 9727 8860 Fax- 1300 360 650 www.arlec.com.au Iron Horse Power Tools Iron Horse Power Tools Pack Qty IWL1000 1000mm Wood Lathe 1 IAC224 Air Compressor 1 Power input 350 Watts. Spindle speeds: 810, Power input 1,500 watts. Motor speed 1180, 1700, 2480rpm. Pulley system 4 Speed, 2,650rpm. Air receiver 24 litre. Pump displace- V belt. Turning capacity: 356mm max. diameter ment 7.9 Cfm. Drive system - direct. Maximum over bed,1000mm max. between centres. pressure 8 bar.(120 PSI). Weight 26 Kg. Overall dims: H 370 x W 240 x L 1500mm. Packaged: Printed box Accessories: face plate, dead centre, live cen- tre, tool rest. Packaged: Printed box APN 9311 644 031062 APN 93 11644 03107 9 IDP5 Drill Press 1 Power input 300 Watts. Pulley system 5 Speed, V Belt. No load speeds: 515, 915, 1430, 1950, 2580 rpm. Chuck capacity 13mm. Maximum spindle travel 50mm. Chuck safety guard. Packaged: Printed box APN 93 11644 03103 1 IHPC1600 High Pressure Cleaner 1 Power input 1600 Watts. Max. pressure 120bar (1750 psi). Water flow: 6L/minute. Spray angle 0-30°. Hose length 5mtrs. Weight 9kg. Accessories: extension wands, adjustable nozzle, detergent bottle, handle, wheels. Packaged: Printed box APN 93 11644 03103 1 ISTK5 5 Piece Starter Kit 1 Kit Contains : Low Pressure Spray Gun : Max pressure 40psi/1lt cap Tyre Inflator : Max pressure 130psi Air Blow Gun : For cleaning & dusting Engine Cleaning Gun : Max. pressure 40psi/1lt cap 5 Metre Coiled Hose : Light & compact APN 93 11644 03113 0 Note: All power tools are covered by a 1 year home use replacement warranty Oct 2003/72 Arlec Australia Limited ACN 003 118 787 • Maroondah Highway, Mooroolbark, Victoria, 3138, Australia • Correspondence to: PO Box 181 Lilydale, Victoria, 3140, Australia 72 SALES ENQUIRIES Tel- (03) 9727 8860 Fax- 1300 360 650 www.arlec.com.au Power Tools & Accessories Power Tools & Accessories Pack Pack Qty Qty EHG998 Heat & Strip Gun 1 ET627 Grinding Bit Set 1 o o Dual temperature range 400 C & 600 C. Super Tool accessory. Grinding bits are mounted Powerful 1600 watt output. High airflow rate. abrasives, with one each of the following sizes, Built-in safety handle. Hanging hook for storage small fluted bit, large conical bit, cylindrical bit. or stand for hands-free use. Well balanced case Pack of 3. Shaft size is 2.3mm diameter. design for easy use and handling. Solid con- Packaged: Blister card struction. Packaged: Printed box APN 93 11644 00057 0 APN 93 11644 00022 8 ET571B Super Tool 1 ET669 Engraving Burr Set 1 This 12 volt, lightweight, versatile electric tool Super Tool/ Engraver accessory. Engraving burrs is designed for sanding, grinding, polishing, cut- are HSS, with one each of the following sizes, ting, engraving, milling, erasing and drilling up ball head bit 1.6mm dia, small trapezium head to 2mm in steel. Includes lock for continuous bit 1.4mm diameter, conical head bit 2.2mm running. High torque motor, operates at 10,000 diameter. Shaft size is 2.3mm diameter. rpm. AC adaptor plugs into a regular 240-Volt Pack of 3. power point. Packaged: Carry case Packaged: Blister card APN 93 11644 00021 1 APN 93 11644 00025 9 ET700 Rotary Tool 1 ET688 Diamond Burr 1 Separate on/off switch & variable speed Super Tool/Engraver accessory. Engraving bit is 0 - 20,000rpm. Collet type chuck. Curl cord HSS with diamond abrasive cutting surface, avoids tangles. Includes an 18Vdc 1A adaptor ball head bit 1.4mm diameter. Shaft size is with a 1.8 metre power cord. Supplied with a 2.3mm diameter. range of 40 accessories inc. engraving, milling, Packaged: Blister card grinding bits & burrs, drill bits, slitting discs & wire brushes. Packaged: Carry case APN 93 11644 01183 5 APN 93 11644 00026 6 RE111 Easy Etch Engraver 1 ET689 Slitting Disc Set 1 Engraves most surfaces including metal, Super Tool accessory. 6 slitting blades 22mm wood, brass, alloys, glass etc. Supplied with a diameter, plus one arbor shaft for holding hardened steel engraving bit. Low vibration blades. Shaft size is 2.3mm diameter. Pack of 6 operation. Adaptor plugs directly into a regular Packaged: Blister card household power point (240V) reducing the volt- age to a safe low 12 volts. Comes supplied with a steel engraving bit. Packaged: Blister card APN 93 11644 00037 2 APN 93 11644 00027 3 ET625 Drill Bit Set 1 ET722 Wire Brush Set 1 Super Tool accessory. Drill bits are HSS, with Super Tool accessory. Wire brushes are made one each of the following sizes: 0.6mm, 0.8mm, from crimped stainless steel wire, with one 1.0mm, 1.2mm. Pack of 4. each of the following sizes, large cup brush, Packaged: Blister pack approx. 12mm diameter, small cup brush, approx. 6mm diameter, wheel brush, approx. 18mm diameter. Shaft size is 2.3mm diameter. Pack of 3. Packaged: Blister card APN 93 11644 00084 6 APN 93 11644 00028 0 Note: All power tools are covered by a 1 year home use replacement warranty Oct 2003/73 Arlec Australia Limited ACN 003 118 787 • Maroondah Highway, Mooroolbark, Victoria, 3138, Australia • Correspondence to: PO Box 181 Lilydale, Victoria, 3140, Australia 73.
Load more

Recommended publications
  • Hand Saws Hand Saws Have Evolved to fill Many Niches and Cutting Styles
    Source: https://www.garagetooladvisor.com/hand-tools/different-types-of-saws-and-their-uses/ Hand Saws Hand saws have evolved to fill many niches and cutting styles. Some saws are general purpose tools, such as the traditional hand saw, while others were designed for specific applications, such as the keyhole saw. No tool collection is complete without at least one of each of these, while practical craftsmen may only purchase the tools which fit their individual usage patterns, such as framing or trim. Back Saw A back saw is a relatively short saw with a narrow blade that is reinforced along the upper edge, giving it the name. Back saws are commonly used with miter boxes and in other applications which require a consistently fine, straight cut. Back saws may also be called miter saws or tenon saws, depending on saw design, intended use, and region. Bow Saw Another type of crosscut saw, the bow saw is more at home outdoors than inside. It uses a relatively long blade with numerous crosscut teeth designed to remove material while pushing and pulling. Bow saws are used for trimming trees, pruning, and cutting logs, but may be used for other rough cuts as well. Coping Saw With a thin, narrow blade, the coping saw is ideal for trim work, scrolling, and any other cutting which requires precision and intricate cuts. Coping saws can be used to cut a wide variety of materials, and can be found in the toolkits of everyone from carpenters and plumbers to toy and furniture makers. Crosscut Saw Designed specifically for rough cutting wood, a crosscut saw has a comparatively thick blade, with large, beveled teeth.
    [Show full text]
  • Polyflor. Design Service the Polyflor Design Service Flair and Flexibility to Make Your Ideas Come to Life
    POLYFLOR. DESIGN SERVICE THE POLYFLOR DESIGN SERVICE FLAIR AND FLEXIBILITY TO MAKE YOUR IDEAS COME TO LIFE When you’re developing a flooring concept, you need more than the right styles and colours. You need more than utter dependability and value pricing. You need a creative partner with flair and flexibility. Polyflor designers have a wealth of experience in flooring. We’ve helped architects and designers create memorable floors for literally hundreds of buildings. We make sure you’re supported through every stage of your project. And we offer a service that’s complete, discrete and dependable. EXPRESSIONS DESIGN SERVICE BORDERS, FEATURES AND DESIGN FLOORS DESIGN SUPPORT Expressions is the Polyflor You need not start from scratch, to Our flexible design support service computerised waterjet service that create a spectacular floor. Our range can do as much or as little as you turns your thoughts into reality. of standard borders, features and wish. If required, we can support you Anything and everything is possible: overall design floors offers plenty of with your whole scheme, from colour from logos to landscapes. options that lets you create beautiful to designs to layouts to on-screen All you have to do is imagine it. floors— simply! CAD rendering and colour options. Flooring opposite: Polysafe Astral. EXPRESSIONS DESIGN SERVICE IF YOU CAN THINK IT WE CAN MAKE IT There’s virtually no limit to the shapes, patterns or pictures you can create with the help of Expressions. The process is in three stages: Imagination, Interpretation, and Realisation. IMAGINATION INTERPRETATION REALISATION The process begins in your head, When the image is agreed, we now One of the world’s most advanced and not necessarily at a drawing create a detailed flooring design on computerised waterjet cutting board.
    [Show full text]
  • Variable Speed Jig Saw
    VARIABLE SPEED JIG SAW 3087464 For replacement parts visit Model # 33606 WENPRODUCTS.COM bit.ly/wenvideo IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us at: 800-232-1195 (M-F 8AM-5PM CST) [email protected] WENPRODUCTS.COM NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual. TABLE OF CONTENTS Technical Data 2 Safety Introduction 3 General Safety Rules 4 Specific Rules for Your Jig Saw 6 Electrical Information 8 Know Your Jig Saw 9 Assembly & Adjustments 10 Operation 13 Maintenance 14 Warranty Statement 15 Exploded View and Parts List 16 TECHNICAL DATA Model Number: 33606 Motor: AC 120V, 60Hz, 6.6A Variable Speed: 0 to 3300 SPM Wood Cutting Capacity: 4-1/4 in. (110 mm) Metal Cutting Capacity: 3/8 in. (10 mm) Bevel Angle: 45° Left & Right Dust Port Outer Diameter: 1-1/2 in. Assembled Dimensions: 9-3/8 x 3-1/4 x 8-5/8 in. Product Weight: 5.4 lbs Replacement blades (Model 33606BW and 33606BM) can be ordered at wenproducts.com. 2 SAFETY INTRODUCTION Thanks for purchasing the WEN Jig Saw.
    [Show full text]
  • Miniature Power Tools C
    MINIATURE POWER TOOLS C DRILLS ¼ HP MOTOR AND FLEXISHAFT 113 BENCH SANDER 107 DAVID USE PHOTO BOHLER DRILL STAND 109 MB1012 BOHLER MINITOOL 109 - 113 CHUCKS 107 / 112 / 116 O COLLETS 107 / 112 / 116 DRILLS & DRILL KITS 104 - 110 DRILL STANDS 106 / 109 / 116 DRILL PRESS VICES 107 DRILL KITS ENGRAVING TOOLS 108 / 113 EXPO ZIRCON DRILLS 105 FLEXIBLE DRIVE SHAFT MINICRAFT 107 N DAVID USE PHOTO MODEL/C 107 MB8571 MINICRAFT BENCH SANDER 111 MINICRAFT DRILLS & KITS 106 MINICRAFT EXTENSION LEADS 108 MINICRAFT JIGSAW 107 MINITOOL 109 - 113 POWER LEADS 108 / 112 T DRILL VICE ROTOCRAFT DRILL KITS 105 - 105 ROTACRAFT JIGSAW 105 SANDERS & ACCESSORIES 107 / 111 TOOL HANGING STAND 113 TRANSFORMERS 108 / 112 UNIMAT ACCESSORIES 114 - 116 E UNIMAT 1 CLASSIC 6 IN 1 TOOL 114 UNIVERSAL DRILL STAND 106 VARIABLE SPEED TRANSFORMERS 108 / 112 FLEXI DRIVE SHAFT N DAVID USE PHOTO MB720 T MINITOOL SAW TABLE DAVID USE PHOTO MB410 S Last Revised 07/07/2011 103 SQUIRES MODEL & CRAFT TOOLS ROTACRAFT DRILL KITS ROTACRAFT SLIM-LINE VARIABLE SPEED ROTARY TOOL a a versatile high speed 230 volt pen grip rotary tool for lightweight ROTACRAFT MINI ROTARY TOOL KIT a versatile high speed 12 craft and modelling tasks. Supplied with a range of 75 assorted volt pen grip rotary tool for lightweight craft and modelling tasks. tools for cleaning, polishing and sanding etc. The drill is a collet Supplied with a range of 44 assorted tools for cleaning, polishing type and is supplied with 4 collets of 1.0, 2.35, 3.0 and 3.2mm. and sanding etc.
    [Show full text]
  • Jointer Fundamentals Working on the Straight and True by Paul Anthony
    Jointer Fundamentals Working on the straight and true By Paul Anthony The jointer belongs to the in a way that speeds up your cut by knives that are set at top trinity of stock-dressing machines woodworking while ensuring dead center to the height of that also includes the tablesaw accuracy and quality of cut. the outfeed table, as shown in and thickness planer. Of those, it’s Before we get started, Figure 1. The outfeed table probably the most misunderstood. it’s important to note that a supports the cut surface as Although its job is simple– jointer–more so than most other the remainder of the board machines–must be precisely is jointed. This is why it’s so stock–the tool frustrates many tuned to work properly. If you’ve important that the tables are woodworkersstraightening andbecause flattening jointing been experiencing snipe or parallel to each other. If they’re consistent problems getting not, or if the knives are set However, when set up and used too high or low, a straight cut properly,requires aa certainjointer willfinesse. do its job check out my “Jointer Tune-up” won’t result. To eliminate or articlestraight in edges issue and#28 faces, or online first minimize tear-out, orient the that no other machine can. at woodcraftmagazine.com. workpiece so the knives rotate preciselyI’ll show and you efficiently how to put in athis way With a jointer, a workpiece in the same direction as the remarkable machine to work fed across the infeed table is slope of the grain, as shown.
    [Show full text]
  • Bandsaw Puzzle Cubes
    Bandsaw Puzzle Cubes How’s that scrap pile in the corner of the shop coming along? Getting any smaller? Here’s one way to put some of your cherished chunks of thick stock to good use, producing casual gifts of irresistible appeal to young and old alike. Kids under ten can reassemble these puzzles in 30 seconds, grown-ups in only three or four minutes if they’re sharp. Make sure your bandsaw blade is square to the table, both left & right and fore & aft. The larger the puzzle cube, the less error you can get away with. Kerf width forgives some inaccuracy, but not much. Start off by milling up a cube — any size will do, but bigger is bet- ter: 3” x 3” or 4” x 4” makes a good puzzle blank. Put a 1/8” or 1/16” blade on your bandsaw, and don’t think about any claims you might have seen that you can’t cut thick stock with a very nar- row blade. Cool Blocks™ lateral guides are essential for 1/16”s and mighty useful for controlling 1/8” blades, too. Orient the cube so you’ll start cut- ting across the grain, and cut a ran- domly invented jigsaw puzzle pattern across the block. Make a fairly simple pattern. Push gently, using just your fingertips. Let the saw take its time working throughthe stock, so the blade stays vertical and your curves are consistent throughout.You’ll notice that sawing with the grain is much slower than across it; be ready for significant changes in speed and back pressure as you turn the block.
    [Show full text]
  • 3/8 In. Variable Speed Electric Drill Instruction Manual
    COMPONENT COMPOSANT COMPONENTE N°691769 3/8 IN. VARIABLE SPEED ELECTRIC DRILL INSTRUCTION MANUAL PERCEUSE À PILE DE 3/8 PO, À VITESSE VARIABLE MODE D’EMPLOI MANUAL DE INSTRUCCIONES SOBRE EL TALADRO ELÉCTRICO DE 3/8 PULG. DE VELOCIDAD VARIABLE THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE. CE MANUEL CONTIENT DES INFORMATIONS IMPORTANTES CONCERNANT LA SÉCURITÉ, LE FONCTIONNEMENT ET LE REMISAGE DE CE PRODUIT. LIRE, ÉTUDIER ET VEILLER À BIEN COMPRENDRE TOUTES LES MISES EN GARDE ET INSTRUCTIONS ET AUTOCOLLANTS APPOSÉS SUR LE PRODUIT AVANT DE L’UTILISER. NE PAS RESPECTER CES INSTRUCTIONS POURRAIT ENTRAÎNER DES BLESSURES ET/OU DES DOMMAGES MATÉRIELS. ESTE MANUAL CONTIENE INFORMACIÓN IMPORTANTE SOBRE LA SEGURIDAD, OPERACIÓN, MANTENIMIENTO Y ALMACE- NAMIENTO DE ESTE PRODUCTO. ANTES DE USARLO, LEA Y COMPRENDA TODAS LAS PRECAUCIONES, ADVERTENCIAS, INSTRUCCIONES Y ETIQUETAS DEL PRODUCTO. DE LO CONTRARIO PODRÍA SUFRIR LESIONES GRAVES O CAUSAR DAÑOS MATERIALES. IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL, KAWASAKI IS A TRADEMARK LICENSED BY KAWASAKI MOTORS HAVE THE FOLLOWING INFORMATION AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE A SUGGESTION OR DISTRIBUTE THIS PRODUCT.
    [Show full text]
  • Waterjet Cutting, Lear, Sweden Case Study: Cutting
    Robotics Waterjet Cutting, Lear, Sweden Case study: Cutting In the tough automobile industry, Sweden run by Lear Corporation, and is responsible for the assembly and production yearly of around 250,000 instrument automotive suppliers such as Lear panel/fascias, headliners and glove compartments for Saab Corporation have to fight hard to and Volvo cars. Lear is one of the town’s largest´employers maintain business with the car and in its quest for success in assembling these units, the companies. An innovative waterjet company has called on some cutting edge technology from ABB and KMT Cutting Systems. cutting robot solution helps the Lear Interiors at Tidaholm has long been an ABB robot company stay ahead. customer, and today has some 60 units deployed throughout the five manufacturing halls on site. One entire line is given over to the production of Volvo S80 instrument and dashboard Cutting edge cutting fascia units, producing some 50,000 pieces annually. “It is like The small but pretty municipality of Tidaholm in Västra a jigsaw puzzle put together by robots,” says Othmar Fiala, Götaland County, south western Sweden, boasts a few production engineer for Lear. churches from the 1100s; there was an ironworks that There are three elements used in the construction of the S80 was replaced in 1868 by a match factory; the River Tidan unit: the outer skin of the fascia – the surface that you can meanders through the center of town, and it has a hotel that see when you sit in the car – the carrier, or the box frame does a rather good buffet lunch.
    [Show full text]
  • Power Tools Dependable Tools • Reliable Brand • Affordable Price
    Power Tool Catalog The Right Tool for the Right Project Power Tools Dependable Tools • Reliable Brand • Affordable Price Introducing Alltrade Trades Pro® power tools, a complete assortment of the most popular power tools with competitive features at affordable price points. Perfect for the basic maintenance projects value-conscious homeowners need to tackle from time-to-time. With an extensive range of cordless portable power tools, electric portable power tools and bench top tools, Alltrade Trades Pro® caters to every customer’s category requirements. The tools offer outstanding features, dependable quality and are backed by a solid warranty to ensure end-user satisfaction. Our high-impact packaging is attractive, informative and communicates brand reliability and value to the consumer. We are committed to delivering the very best value for the price. Alltrade Trades Pro® has what you need for sales success! 2 Cordless Power Tools 836777 836774 4.8 Volt 3-Position Cordless Screwdriver 14.4 Volt Cordless Drill/Driver • Handle locks in 3 positions • 3/8” keyless chuck, 16 position clutch • Built-in worklight, auto spindle lock • Variable speed trigger, electric brake • Includes 4 pc. 2” power bits • Includes battery and 5-8 hour charger UPC: 028907-340135 Case Qty: 10 Shelf Qty: 10 UPC: 028907-340104 Case Qty: 8 Shelf Qty: 8 836710 836840 18 Volt Cordless Drill/Driver 18 Volt Cordless Drill/Driver & Worklight • 3/8” keyless chuck, 16 position clutch • 3/8” keyless chuck, 16 position clutch • Variable speed trigger, electric brake • Variable speed trigger, electric brake • Includes battery and 5-8 hour charger • Includes worklight, battery and 5-8 hour charger UPC: 028907-338439 Case Qty: 8 Shelf Qty: 8 UPC: 28907-344065 Case Qty: 6 Shelf Qty: 6 836785 24 Volt Cordless Drill/Driver Kit • 3/8” keyless chuck, 25 position clutch • Variable speed trigger, electric brake • Includes battery, 5-8 hour charger, 13 pc.
    [Show full text]
  • Working-Class Router Table Easy-To-Build Table Is About Results, Not Appearances
    Working-Class Router Table Easy-to-build table is about results, not appearances BY MARC ADAMS 60 FINE WOODWORKING COPYRIGHT 2014 by The Taunton Press, Inc. Copying and distribution of this article is not permitted. router table is indispensable for a wide range of tasks. in it; or a simple table-insert plate with a router screwed to it. Armed with a big, solid fence, it can cut joinery, raise Whatever you choose, the plate should be 3⁄8 in. to 1⁄2 in. thick A panels, produce moldings, and even edge-joint boards. and made from a material like aluminum or phenolic that won’t Take off the fence and the table can be used for pattern routing. sag from the weight of a big router. I went with the insert plate, I designed and built this router table years go, when I needed attaching a router I already own, a more affordable approach something fast and simple. I always figured I’d replace it some than buying a lift. day with something nicer. But nearly 30 years later, the original You’ll also need a simple plastic dust port designed for router table is still in use at my school, and we have built seven more fences, and some 1⁄4–20 threaded knobs and T-nuts for attaching just like it. That’s because the materials are affordable, the joinery the fence. If you don’t have a tool-triggered shop vacuum, I also is straightforward, the table is accurate, and it has all the features recommend a double switch made for router tables, like the one we require.
    [Show full text]
  • Popular Woodworking's Guide to Routers
    JANUARY 2008 PRESENTS TIPS, TRICKS & EXPERT ADVICE ESSENTIALESSENTIAL GUIDEGUIDE TOTO ROUTERSROUTERS JIgs, JOINts & SKILLS Everything You Need to WorK LIKE A Pro BONUS: The Complete 7-Chapter Guide to ROUTER MASTERY 12 BEST US $5.99 ROUTER JIGS 01 Boost Your Accuracy 0 74470 01489 8 popularwoodworking.com Display until January 15, 2008 Essential Guide to Routing ON THE COVER Routers do more than just decorate CONTENTS edges. Used correctly, a router 8 Router Table-mate can be a joinery With just $50 and a long weekend in your shop, Woodworking Essentials: powerhouse as well. you can make a router table that puts your old This series of articles from a veteran woodworker Workmate (or sawhorses) back to use. and teacher covers all the bases of router use. by Steve Shanesy From choosing and setting up a tool, to making intricate and complex joints, to selecting the right Photo BY AL PARRISH bit for the job, this guide will give you a good start 15 Housed Dovetails and keep you routing in the right direction. The super-strong housed-dovetail joint is a by Nick Engler stalwart of 18th-century furniture – and it’s surprisingly simple to cut with your router. by Geoffrey Ames 27 Chapter 1: Fixed-base Router Reduced to its basics, the router is simply a motor and shaft that holds interchangeable 18 The $22 Dovetail Jig bits. Once you understand how the parts Perfect half-blind dovetails with your router work together, you’re on your way to don’t require a $300 jig – you can make your becoming a router pro.
    [Show full text]
  • Peter J. Young +1 (617)-712-8233 Industrial Designer
    www.peterjyoung.com [email protected] PETER J. YOUNG +1 (617)-712-8233 INDUSTRIAL DESIGNER WORK EXPERIENCE EDUCATION GRAND TIME, INC. — PRODUCT DESIGNER RHODE ISLAND SCHOOL OF DESIGN (RISD) Dallas, TX / April 2019 — December 2019 (8 months) Providence, RI / BFA, Industrial Design 2014 I managed product development for JBW and Breda as well as licensed brands. My day-to-day responsibilities centered around reviewing technical Resident Advisor 2012—2014 (3 years) drawings, providing updates to team members, keeping calendars up to date, Machine Shop Monitor 2013—2014 (2 years) and communicating with factories. I designed product for both brands to meet Machine Shop Head Monitor 2014 (1 year) seasonal launch dates and negotiated pricing with factories. FOSSIL GROUP, INC. — WATCH DESIGNER Dallas, TX / July 2016 — April 2019 (2 years 9 months) I started on the Women’s Watch team, identifying white space in the product SKILLS lineup and designing watches to drive growth with millennial customers. After our director resigned, I collaborated with creative directors from other teams to create high-level concept stories while managing the team’s day-to-day output. I later moved to the Men’s Watch team where I designed a new dress watch, DESIGN as well as contributed to advanced development concepts. Low-fidelity mockups, rapid prototyping, concept sketching, Class-A 3D surfacing, 3D printing, design research, design strategy, design presentation, technical drawings, material sourcing FREELANCE — DESIGN CONSULTANT Boston, MA / January 2016 — July 2016 (9 months) SOFTWARE After coming back from Europe, I worked as a barista while job hunting and Adobe Photoshop, Adobe Illustrator, Adobe InDesign freelancing.
    [Show full text]