DOCSLIB.ORG

Power Tools Dependable Tools • Reliable Brand • Affordable Price

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

Power Tool Catalog The Right Tool for the Right Project Power Tools Dependable Tools • Reliable Brand • Affordable Price Introducing Alltrade Trades Pro® power tools, a complete assortment of the most popular power tools with competitive features at affordable price points. Perfect for the basic maintenance projects value-conscious homeowners need to tackle from time-to-time. With an extensive range of cordless portable power tools, electric portable power tools and bench top tools, Alltrade Trades Pro® caters to every customer’s category requirements. The tools offer outstanding features, dependable quality and are backed by a solid warranty to ensure end-user satisfaction. Our high-impact packaging is attractive, informative and communicates brand reliability and value to the consumer. We are committed to delivering the very best value for the price. Alltrade Trades Pro® has what you need for sales success! 2 Cordless Power Tools 836777 836774 4.8 Volt 3-Position Cordless Screwdriver 14.4 Volt Cordless Drill/Driver • Handle locks in 3 positions • 3/8” keyless chuck, 16 position clutch • Built-in worklight, auto spindle lock • Variable speed trigger, electric brake • Includes 4 pc. 2” power bits • Includes battery and 5-8 hour charger UPC: 028907-340135 Case Qty: 10 Shelf Qty: 10 UPC: 028907-340104 Case Qty: 8 Shelf Qty: 8 836710 836840 18 Volt Cordless Drill/Driver 18 Volt Cordless Drill/Driver & Worklight • 3/8” keyless chuck, 16 position clutch • 3/8” keyless chuck, 16 position clutch • Variable speed trigger, electric brake • Variable speed trigger, electric brake • Includes battery and 5-8 hour charger • Includes worklight, battery and 5-8 hour charger UPC: 028907-338439 Case Qty: 8 Shelf Qty: 8 UPC: 28907-344065 Case Qty: 6 Shelf Qty: 6 836785 24 Volt Cordless Drill/Driver Kit • 3/8” keyless chuck, 25 position clutch • Variable speed trigger, electric brake • Includes battery, 5-8 hour charger, 13 pc. accessories and case UPC: 028907-340227 Case Qty: 4 Shelf Qty: 4 3 Corded Power Tools 836712 836718 3/8" Variable Speed Drill 3/8" Variable Speed Drill • 3.2 amp motor With Bonus 21 Pc. Drill Bit Set • 3/8” keyed chuck • 3.2 amp motor • Variable speed trigger • 3/8” keyed chuck UPC: 028907-338606 Case Qty: 8 Shelf Qty: 8 • Includes 21 pc. drill bit set (1/16”-3/8”) UPC: 028907-338712 Case Qty: 8 Shelf Qty: 8 836709 836721 1/2" Variable Speed Hammer Drill 1/2" Variable Speed Hammer Drill • 4.2 amp motor With Bonus 4 Pc. SDS Rotary Bit Set • 3/8” keyed chuck • 4.2 amp motor • Includes side assist handle and depth stop • 3/8” keyed chuck UPC: 028907-338552 Case Qty: 8 Shelf Qty: 8 • Includes 4 pc. rotary hammer bit set, side handle and depth stop UPC: 028907-338798 Case Qty: 8 Shelf Qty: 8 836727 836729 Single Speed Jigsaw Single Speed Jigsaw • 2.5 amp motor With Bonus 36 Pc. Jigsaw Blade Set • Blade roller support, lock-on button • 2.5 amp motor • Includes 1 each wood and metal cutting blade • Blade roller support, lock-on button UPC: 028907-339009 Case Qty: 6 Shelf Qty: 6 • Includes 36 pc. jigsaw blade assortment UPC: 028907-339207 Case Qty: 6 Shelf Qty: 6 4 Corded Power Tools 836786 836716 Detail Palm Sander 1/4 Sheet Palm Sander • .80 amp motor • 1.0 amp motor • Compact, lightweight design for detail • Dust sealed switch and contour sanding • Sands flush on 3 sides • Includes 2 sanding discs UPC: 028907-338699 Case Qty: 8 Shelf Qty: 8 UPC: 028907-340234 Case Qty: 12 Shelf Qty: 12 836787 836789 1/3 Sheet Finishing Sander 3" x 21" Belt Sander • 1.1 amp motor • 7.5 amp motor • Two handed design • Flush edge design • Sands flush on 3 sides • Includes dust bag UPC: 028907-340265 UPC: 028907-340289 Case Qty: 6 Shelf Qty: 6 Case Qty: 10 Shelf Qty: 10 836715 836720 Trim Router Variable Speed Rotary Tool Kit • 4.2 amp motor • 1.0 amp motor • 1/4” collet • Spindle lock • Easy adjust cutting depth • Includes 40 pc accessories and case UPC: 028907-338637 Case Qty: 10 Shelf Qty: 10 UPC: 028907-338736 Case Qty: 10 Shelf Qty: 10 5 Corded Power Tools 836701 836733 Variable Speed Reciprocating Saw • 4.5 amp motor 7-1/4" Circular Saw • Adjustable pivoting shoe, lock-on button • 12 amp motor • Includes 1 each wood and metal cutting blade • Front and rear assist handles, bevel adjustment • Includes 24T carbide blade and wrench UPC: 028907-338408 Case Qty: 6 Shelf Qty: 6 UPC: 028907-339283 Case Qty: 4 Shelf Qty: 4 836719 836713 4-1/2" Angle Grinder 4-1/2" Angle Grinder • 4.2 amp motor With Bonus 10 Pc. Grinding Wheels • Spindle lock, two position side handle • 4.2 amp motor • Includes grinding wheel, side handle and wrench • Spindle lock, two position side handle • Includes 10 pc. grinding wheel assortment, side UPC: 028907-338613 Case Qty: 8 Shelf Qty: 8 handle and wrench UPC: 028907-338729 Case Qty: 8 Shelf Qty: 8 836771 836772 4-1/2" Variable Speed Angle Grinder • 5.0 amp motor 5" Angle Grinder • 0 – 10,000 RPM, two position side handle • 9.0 amp motor • Includes grinding wheel, side handle and wrench • Spindle lock, three position side handle • Includes grinding wheel, side handle and wrench UPC: 028907-340074 Case Qty: 6 Shelf Qty: 6 UPC: 028907-340081 Case Qty: 6 Shelf Qty: 6 6 Corded Power Tools 836711 836773 7" Angle Grinder 14 Gauge Metal Shears • 10 amp motor • 4.0 amp motor • Spindle lock, two position side handle • Swivel head • Includes grinding wheel, side handle and wrench • Lock-on button UPC: 028907-338583 Case Qty: 4 Shelf Qty: 4 UPC: 028907-340098 Case Qty: 4 Shelf Qty: 4 836717 836714 Hot Air Heat Gun 1/2" Impact Wrench • 1500 watt • 8.3 amp motor • Two temperature settings • 240 ft/lbs of torque • Includes 4 nozzles • Metal gear box UPC: 028907-338705 Case Qty: 10 Shelf Qty: 10 UPC: 028907-338620 Case Qty: 4 Shelf Qty: 4 836823 836788 10" Orbital Car Polisher 7" Sander/Polisher • .60 amp motor • 11 amp motor • Random orbital polishing action • Variable speed • Includes 2 bonnets • Two handed design UPC: 028907-340272 Case Qty: 4 Shelf Qty: 4 UPC: 028907-340272 Case Qty: 4 Shelf Qty: 4 7 Benchtop Tools 836722 836776 6" Bench Grinder 8" Bench Grinder • 1/2 HP motor • 3/4 HP motor • Adjustable tool rests • Adjustable tool rests • Medium and coarse wheels • Medium and UPC: 028907-338873 coarse wheels Case Qty: 1 UPC: 028907-340128 Shelf Qty: 1 Case Qty: 1 Shelf Qty: 1 836792 836793 6" Bench Grinder With Flexible Worklight 8" Bench Grinder With Flexible Worklight • 1/2 HP motor • 3/4 HP motor • Adjustable tool rests • Adjustable tool rests • Medium and coarse wheels • Medium and coarse wheels UPC: 028907-340432 UPC: 028907-340531 Case Qty: 1 Case Qty: 1 Shelf Qty: 1 Shelf Qty: 1 836755 836782 7" Abrasive Cut-Off Saw 14" Abrasive Cut-Off Saw • 4.2 amp motor • 15 amp motor • Cuts up to 1-1/2” round pipe • Quick release clamp, large loop handle • Includes abrasive wheel and wrench • Includes abrasive wheel and wrench UPC: 028907-339849 Case Qty: 4 Shelf Qty: 4 UPC: 028907-340197 Case Qty: 1 Shelf Qty: 1 8 Benchtop Tools 836731 836728 10" Table Saw 8-1/4" Compound Miter Saw • 15 amp motor • 10 amp motor • Die-cast aluminum table • Portable design • Includes 40T carbide blade, miter gauge and rip fence • Includes 24T carbide blade, dust collection bag UPC: 028907-339269 and wrench Case Qty: 1 Shelf Qty: 1 UPC: 028907-339191 Case Qty: 1 Shelf Qty: 1 836790 836791 10" Compound Miter Saw 12" Compound Miter Saw • 14 amp motor • 15 amp motor • 4,600 RPM • 4,800 RPM • Includes 40T carbide blade and vertical clamp • Includes carbide blade, vertical clamp and extension wings UPC: 028907-340531 Case Qty: 1 Shelf Qty: 1 UPC: 028907-340371 Case Qty: 1 Shelf Qty: 1 836822 836781 7" Wet Tile Saw 8" Bench Drill Press • 4.0 amp motor • 2.5 amp motor • Table tilts up to 45º degrees for bevels • 1/2" keyed chuck, 5 speeds, • Includes diamond blade, angle guide and water adjustable table reservoir tray • 2" spindle stroke UPC: 028907-343181 Case Qty: 1 Shelf Qty: 1 UPC: 028907-340180 Case Qty: 1 Shelf Qty: 1 9 The Right Tool for the Right Project Power Tools Dependable Tools • Reliable Brand • Affordable Price ALLTRADE TOOLS LLC • 1431 Via Plata, Long Beach, CA 90810-1462 Toll Free 800/368-6653 • In CA 310/522-9008 • FAX 310/522-9066 www.alltradetools.com © Copyright 2009, ALLTRADE TOOLS LLC • 04/16 r1 • Form 829.
Recommended publications

  • THREE WHEEL BANDSAW/DISC SANDER Model: SM1214

    INSTRUCTIONS FOR: THREE WHEEL BANDSAW/DISC SANDER Model: SM1214 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE. 1. SAFETY INSTRUCTIONS 1.1. ELECTRICAL SAFETY. p WARNING! It is the users responsibility to read, understand and comply with the following: You must check all electrical equipment and appliances to ensure they are safe before using. You must inspect power supply leads, plugs and all electrical connections for wear and damage. You must ensure the risk of electric shock is minimised by the installation of appropriate safety devices. An RCCB (Residual Current Circuit Breaker) should be incorporated in the main distribution board. We also recommend that an RCD (Residual Current Device) is used with all electrical products. It is particularly important to use an RCD with portable products that are plugged into an electrical supply not protected by an RCCB. If in doubt consult a qualified electrician. You may obtain a Residual Current Device by contacting your Sealey dealer. You must also read and understand the following instructions concerning electrical safety. 1.1.1. The Electricity At Work Act 1989 requires all portable electrical appliances, if used on business premises, to be tested by a qualified electrician, using a Portable Appliance Tester (PAT), at least once a year.
  • Hand Saws Hand Saws Have Evolved to fill Many Niches and Cutting Styles

    Hand Saws Hand Saws Have Evolved to fill Many Niches and Cutting Styles

    Source: https://www.garagetooladvisor.com/hand-tools/different-types-of-saws-and-their-uses/ Hand Saws Hand saws have evolved to fill many niches and cutting styles. Some saws are general purpose tools, such as the traditional hand saw, while others were designed for specific applications, such as the keyhole saw. No tool collection is complete without at least one of each of these, while practical craftsmen may only purchase the tools which fit their individual usage patterns, such as framing or trim. Back Saw A back saw is a relatively short saw with a narrow blade that is reinforced along the upper edge, giving it the name. Back saws are commonly used with miter boxes and in other applications which require a consistently fine, straight cut. Back saws may also be called miter saws or tenon saws, depending on saw design, intended use, and region. Bow Saw Another type of crosscut saw, the bow saw is more at home outdoors than inside. It uses a relatively long blade with numerous crosscut teeth designed to remove material while pushing and pulling. Bow saws are used for trimming trees, pruning, and cutting logs, but may be used for other rough cuts as well. Coping Saw With a thin, narrow blade, the coping saw is ideal for trim work, scrolling, and any other cutting which requires precision and intricate cuts. Coping saws can be used to cut a wide variety of materials, and can be found in the toolkits of everyone from carpenters and plumbers to toy and furniture makers. Crosscut Saw Designed specifically for rough cutting wood, a crosscut saw has a comparatively thick blade, with large, beveled teeth.
  • VARIABLE SPEED BELT SANDER Operator’S Manual

    VARIABLE SPEED BELT SANDER Operator’S Manual

    241-9801 3” X 21” VARIABLE SPEED BELT SANDER Operator’s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference. IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. ! READ ALL INSTRUCTIONS BEFORE USING THIS TOOL 1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. 2. CONSIDER WORK AREA ENVIRONMENT. Don’t use power tools in damp, wet, or poorly lit locations. Don’t expose your tool to rain. Keep the work area well lit. Don’t use tools in the presence of flammable gases or liquids. 3. KEEP CHILDREN AND BYSTANDERS AWAY. All children should be kept away from the work area. Don’t let them handle machines, tools or extension cords. Visitors can be a distraction and are difficult to protect from injury. 4. GROUNDED TOOLS must be plugged into an outlet that itself is properly installed and grounded. Grounding provides a low-resistance path to carry electricity away from the operator, should the tool malfunction electrically. Do not remove the grounding prong from the plug or alter the plug in any way. If in doubt as to whether the outlet is properly grounded according to code, check with a qualified electrician. 5. OBSERVE PROPER PRECAUTIONS REGARDING DOUBLE INSULA- TION. This tool is double insulated. It is equipped with a polarized plug. One blade is wider than the other, so it will fit into a polarized outlet only one way.
  • Tim's Taper Tool

    Tim's Taper Tool

    Tim’s Taper Tool For Nocks and Tips Installation and Operating Instructions for use on Table Saws and Large Sanders CAUTION ! DO NOT USE YOUR TAPER TOOL WITH A SAW BLADE. USE ONLY WITH A SANDING DISC!! BE FAM ILIAR WITH YOUR S AW OR DISC SA NDER O PERA TIONS A ND FOLLO W ALL SAFETY PRECAUTIONS. Read all directions before you start. Please follow these directions carefully and do not hurry through the process. 1. Place the guide inside the slot on your table saw or disc sander. If the guide is too large, slowly sand or cut down the short side of the guide until it fits into the slot. 2. Once the guide fits into the slot, push it to the bottom of the slot. Place a good grade of wood glue on one of the wedges and push into place. Glue and place the second wedge. Now apply firm pressure to the en ds of both wedges to force them against the guide . Allow to dry. 3. After the glue has dried, attach the taper tool to the guide with the thumb screws. Finger tighten. 4. Remove the assembled tool from the slot and set aside. You are almost ready to begin tapering your arrow shafts, BUT .... 5. Inspect your sanding wheel carefully! If the sand paper is loose or damaged REPLACE it! The taper tool fits closely to the wheel and loose sand paper will damage the tool and ruin your arrow shafts. 80 grit sand paper is recommended for tapering your arrow shafts but any grit from 60 to 120 will work.
  • BD4603 Belt Disc Sander

    BD4603 Belt Disc Sander

    BD4603 4×6 " BELT DISC SANDER CONTACT US:[email protected] IMPORTANT: For your own safety, read and follow all of the Safety INSTRUCTION Guidelines and Operating Instructions before operating MANUAL this product. BD4603 2 TABLE OF CONTENTS Specifications 2 Safety guidelines 3 Package contents 9 Key parts diagram 10 Operating instructions 11 Maintenance 16 Troubleshooting 18 Exploded view 19 Parts list 20 Warranty 23 TABLE OF CONTENTS TABLE SPECIFICATIONS Motor 120VAC, 60Hz , 5.0A Speed (no load) 3450RPM Belt size 4" x 36" Belt speed 2161 FPM Disc size 6" Disc speed 3450RPM 3 BD4603 SAFETY GUIDELINES - DEFINITIONS • Always wear safety goggles or safety glasses with side shields. Specifications 2 • Always wear respiratory and hearing protection. • To reduce the risk of injury, user and all bystanders must read and understand instruction manual before using this product. • Failure to keep your hands away from the moving part and cutting surface will result in serious personal injury. • No children or pregnant women should enter the work area where the paint sanding is being done until all clean up is completed. • A dust mask or respirator should be worn by all persons entering the work area. The filter should be replaced daily or whenever the wearer has difficulty breathing. • NO EATING, DRINKING or SMOKING should be done in the work area to prevent ingesting contaminated paint particles. Workers should wash and clean up BEFORE eating, drinking or smoking. Articles of food, drink, or smoking should not be left in the work area where dust would settle on them. • Paint should be removed in such a manner as to minimize the amount of dust generated.
  • Manufacturing Capabilities

    Manufacturing Capabilities

    Manufacturing ES2 Capabilities Introduction CACI has built up a robust manufacturing capacity with unique capabilities ranging from low-rate precision prototyping to rapid prototyping and small batch manufacturing at several of the company’s sites. We provide specialized and unique manufacturing support to both our U.S. Government and commercial customers at these locations. Our Albuquerque, New Mexico site can produce precision-machined parts using aluminum and steel, and is equipped with a host of cutting- edge metalworks machinery, as well as an intensive welding capability. CACI’s Lexington Park, Maryland site also has dedicated staff available to support small batch manufacturing and rapid prototyping with ferrous and non-ferrous metals. Our Columbia, Maryland site specializes in high-precision design and high-complexity prototype fabrication using a variety of materials and machining techniques. All of our sites and facilities operate CACI-owned machinery and can support any customer’s manufacturing requirements. Table of Contents Logistics Support Facility ▪ Albuquerque, New Mexico ................................................2 What We Do .........................................................................................................................................................3 Our Manufacturing and Fabrication Capabilities ..................................................................................... 4 Integrated Products and Services ▪ Lexington Park, Maryland ................................6 What We Do
  • MITER SAW SAFETY (Reviewed 9/27/2007)

    MITER SAW SAFETY (Reviewed 9/27/2007)

    MITER SAW SAFETY (Reviewed 9/27/2007) 1. Tool Use and Care • Use clamps or other practical way to secure and support the work piece to a stable platform. Holding the work by hand or against you body is unstable. It allows for work to shift, causes binding of the tool and loss of control. • Do not force tool. Use correct tool for you application. The correct tool will do the job better and safer at the rate for which it is designed. Do not use the tool for purposes not intended – for example; do not use the miter saw for slicing meat. • Do not use tool if switch does not turn it “ON” or “OFF”. Any tool that cannot be controlled with the switch is dangerous. • Disconnect the plug from the power source before making any adjustments for changing accessories. Such prevention safety measures reduce the risk of starting the tool accidentally. • Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges, are less likely to bind and easier to control. When mounting saw blades be certain that the arrow on the blade matches the direction of the arrow marked on the tool and that the teeth are also pointing in the same direction. • Inspect guards before using. Keep guards in place. Check moving parts for binding or any other condition that may affect the normal operation of safety features of the tool. If damaged, have tool serviced before using the tool. Many accidents are caused by poorly maintained tools. • Do not alter or misuse tool.
  • LS1219 / LS1219L Slide Compound Miter

    LS1219 / LS1219L Slide Compound Miter

    Satisfy Professional's Needs Max. cutting capacity (height x width) Slide Compound Miter Saw LS1219 / LS1219L 305mm (12") Cross Cut Miter Cut (left & right) Bevel Cut (left & right) Compound Cut Crown Baseboard molding, (Skirt board) 45 degree 90o type 90o 45o 45o 45o 90o 90o 45o Bevel Miter Bevel Miter Single sliding system Bevel 45o 61 x 268 left (2-3/8” x 10-1/2”) 92 x 268 61 x 382 enables smooth o o 45 (3-5/8”x10-1/2”) 45 (2-3/8” x 15” ) Upright cutting Upright cutting left/ 107 x 255 left 71 x 363 Miter 71 x 255 203 (8”) 171 (6-3/4”) right (4-1/4” x 10”) (2-13/16” x 14-1/4”) o 45 (2-13/16” x 10”) operation to produce 92 x 382 left/ (3-5/8” x 15”) right 107 x 363 Bevel superior cuts (4-1/4” x 14-1/4”) o 44 x 268 45 (1-3/4” x 10-1/2”) 92 x 185 44 x 382 right o o 60 (3-5/8” x 7-1/4”) 45 (1-3/4” x 15” ) Horizontal cutting Horizontal cutting left/ 107 x 178 right 54 x 363 Miter o right (4-1/4” 7”) (2-1/8” x 14-1/4”) 45 54 x 255 320 (12-5/8”) 416 (16-3/8”) left/ (2-1/8” x 10”) right (mm) Accessories Vertical vise assembly Dust bag assembly Stand Part No. 126617-2 Part No. 122852-0 Part No. WST06 Horizontal vise assembly Part No.
  • Polyflor. Design Service the Polyflor Design Service Flair and Flexibility to Make Your Ideas Come to Life

    Polyflor. Design Service the Polyflor Design Service Flair and Flexibility to Make Your Ideas Come to Life

    POLYFLOR. DESIGN SERVICE THE POLYFLOR DESIGN SERVICE FLAIR AND FLEXIBILITY TO MAKE YOUR IDEAS COME TO LIFE When you’re developing a flooring concept, you need more than the right styles and colours. You need more than utter dependability and value pricing. You need a creative partner with flair and flexibility. Polyflor designers have a wealth of experience in flooring. We’ve helped architects and designers create memorable floors for literally hundreds of buildings. We make sure you’re supported through every stage of your project. And we offer a service that’s complete, discrete and dependable. EXPRESSIONS DESIGN SERVICE BORDERS, FEATURES AND DESIGN FLOORS DESIGN SUPPORT Expressions is the Polyflor You need not start from scratch, to Our flexible design support service computerised waterjet service that create a spectacular floor. Our range can do as much or as little as you turns your thoughts into reality. of standard borders, features and wish. If required, we can support you Anything and everything is possible: overall design floors offers plenty of with your whole scheme, from colour from logos to landscapes. options that lets you create beautiful to designs to layouts to on-screen All you have to do is imagine it. floors— simply! CAD rendering and colour options. Flooring opposite: Polysafe Astral. EXPRESSIONS DESIGN SERVICE IF YOU CAN THINK IT WE CAN MAKE IT There’s virtually no limit to the shapes, patterns or pictures you can create with the help of Expressions. The process is in three stages: Imagination, Interpretation, and Realisation. IMAGINATION INTERPRETATION REALISATION The process begins in your head, When the image is agreed, we now One of the world’s most advanced and not necessarily at a drawing create a detailed flooring design on computerised waterjet cutting board.
  • A Belt Sander Is a Machine Which Has a Revolving Abrasive Belt Used To

    A Belt Sander Is a Machine Which Has a Revolving Abrasive Belt Used To

    Procedure No.: SS-MHA-BLTSNDR EH&S/General Safety Shop Safety Program Authorized/Approved By: Title: Shop Equipment Hazard Analysis & Management Form Issue Date: Review Date: Page Number: 1 of 4 1. Hazard Management Details - General Shop/Equipment Item: BELT SANDER Make/Model No.: Serial No.: Department: Work Location: Person(s) Conducting Hazard Analysis: JOHN M. SEAMAN Date Conducted: May 3, 2013 Campus General Safety Specialist Equipment Photo: Description of Use: Summary of Key Risks: (refer to appropriate subsections) A belt sander is a machine which • Entanglement has a revolving abrasive belt used to • Trauma (Impact/Cutting/Friction) sand down wood and other materials • Inhalation for finishing purposes. • Eye Injury • Hand/Foot Injury • Noise • Fire/Explosion • Electrical Shock Forward completed forms to EH&S General Safety for approval prior to use. Forms may be sent via email to [email protected]. Procedure No.: SS-MHA-BLTSNDR EH&S/General Safety Shop Safety Program Equipment/Machine: BELT SANDER Title: Shop Equipment Hazard Analysis & Management Form Issue Date: Review Date: Page Number: 2 of 4 2. Documentation: Relevant Legislation/Standards Y / N Comments: a. Is equipment required to be registered? Y N b. Is a user license/Certification required? Y N c. Key Reference Materials Required: Manufacturer’s Operator’s Manual (specifically safety features) General Requirements: OSHA 29 CFR 1910.132 Machine Safeguarding: OSHA 29 CFR 1910.213(p)(2), 1910.213(p)(3) and 1910.219. Hearing Conservation: OSHA 29 CFR 1910.95 https://www.osha.gov/SLTC/etools/woodworking/production_sanders.html Equipment Documentation Y / N Comments: a. Are operator’s manuals accessible? Y N b.
  • 10˝ Dual Speed Sliding Compound Miter Saw

    10˝ Dual Speed Sliding Compound Miter Saw

    10˝ DUAL SPEED SLIDING COMPOUND MITER SAW LISTED E493385 For replacement parts visit Model # 70730 WENPRODUCTS.COM bit.ly/wenvideo IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us at: 800-232-1195 (M-F 8AM-5PM CST) [email protected] WENPRODUCTS.COM TABLE OF CONTENTS Technical Data 2 Introduction 3 General Safety Rules 4 Specific Rules For the Miter Saw 6 Electrical Information 9 Unpacking and Transporting 10 Know your Miter Saw 10 Assembly and Adjustments 12 Operation 19 Maintenance 22 Exploded View & Parts List 23 Warranty 26 TECHNICAL DATA Model Number: 70730 Motor: 120 V, 60 Hz, 15A No-Load Speed: Speed 1: 2000 RPM Speed 2: 4500 RPM Blade Model Number: 70730-002 Blade Size: 10˝ TCT Multi-Purpose Blade Arbor Size: 5/8 in. Arbor Number of Teeth: 48 Teeth Miter Table Angles: 0° to 45° Left & Right Bevel Cut Angles: 0° to 45° Left Only Cutting Capacity: 0° Miter, 0° Bevel: 12 by 3-1/2 in. 45° Miter, 0° Bevel: 8-1/2 by 3-1/2 in. 0° Miter, 45° Bevel: 12 by 1-7/8 in. 45° Miter, 45° Bevel: 8-1/2 by 1-7/8 in.
  • Finishing Sander

    Finishing Sander

    Finishing Sander I. Competencies Given a properly adjusted finishing sander, accessories, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the finishing sander. B. Pass a written test on safety and operating procedures of the finishing sander with 100 percent accuracy. C. Demonstrate ability to use the finishing sander, following suggested safety rules and correct operation procedures. II. Instructional Materials and Procedures A. Identification of basic finishing sander parts. 1. Brush Holder 6. Paper Clamp 2. Switch Lock 7. Pad 3. Trigger Switch 8. Paper Clamp 4. Handle 9. Aluminum Housing 5. Cord Strain Reliever 10. Front Hand Knob B. Finishing Sander Safety 1. Wear safety glasses at all times when using the finishing sander. 2. Wear a dust mask or respirator to prevent breathing the fine saw dust particles that are generated by the finishing sander. 3. Keep the electrical and extension cords away from the work area. 4. Wear hearing protectors when using finishing sanders that are noisy. 5. Secure or clamp the stock before starting the sanding operation. 6. Watch out for slick walking suffices when using the finishing sander. Fine dust particles will settle on the floor making it slick. 7. Visually inspect the sander to make sure the electrical cord is not frayed or pulled out of the sander housing. If either condition exists repair the sander before using. 8. If the sander sparks excessively when being used check the brushes. Reseat or replace the brushes as necessary to reduce sparking. 9. Do not over-extend and get off balance when using the finishing sander.