DOCSLIB.ORG

Available Immediately

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Available Immediately AVAILABLE IMMEDIATELY By Order of ON Semiconductor, Assets Surplus to On-Going Operations 6" 150mm and 4" 100mm Semiconductor Fabrication, Lithography, Inspection and Facility Equipment Piešťany, Slovakia 31555 West Fourteen Mile Road, Suite 301 Farmington Hills, Michigan 48334 USA Ph +1 248-254-9999 • Fx +1 248-254-9995 www.hilcoind.com A Hilco Global Company Vested in Your Success AVAILABLE IMMEDIATELY By Order of ON Semiconductor, Assets Surplus to On-Going Operations Vrbovská cesta 2617/102 Piešťany, Slovakia All Assets Available Prior to Auction On-Going Private Treaty/Negotiated Sale to be Followed with an On-Line Auction Closing January 30, 2014 For more information, please contact Matthew Hoskins +44 (0)113 3945 963 [email protected] John Ward +1 714 393 5111 [email protected] 2 To schedule an auction, please call Hilco Industrial at +1 616-732-1800 6” 150mm ETCHERS 6” 150mm ETCHERS 3 – LAM 4420 6” 150MM PLASMA ETCHERS 2 – LAM AUTO ETCH 590/490 6” 150MM PLASMA ETCHERS Partial Listing Only, Please Visit Our Website 2 – TEGAL PLASMA 900E 6” 150MM PLASMA ETCHERS www.hilcoind.com For Complete Lot Catalog For more information, please visit us on the web at www.hilcoind.com 3 4” 100mm ETCHERS 4” 100mm ETCHERS 4 – AMAT P5000 4” 100MM CVD TEOS PLASMA ETCHERS - SOLD 2 – AMAT AME-8100 4” 100MM PLASMA ETCHERS 1 – TRIKON OMEGA 201 4” 100MM PLASMA ETCHER - SOLD 4 To schedule an auction, please call Hilco Industrial at +1 616-732-1800 6” 150mm SEMICONDUCTOR TOOLS 6” 150mm SEMICONDUCTOR TOOLS 4 – NIKON NSR-1755G7A 6” 150MM STEPPERS - SOLD 2 – NIKON NSR-2005G8C 6” 150MM STEPPERS - SOLD 1 – SEMIX TR6133U 6” 150MM COATER 2 – MATRIX SYSTEM ONE 6” 150MM ASHERS 1 – TENCOR SURFSCAN 7600 6” 150MM PATTERNED INSPECTION STATION For more information, please visit us on the web at www.hilcoind.com 5 4” 100mm SEMICONDUCTOR TOOLS 4” 100mm SEMICONDUCTOR TOOLS 1 – NOVELLUS CONCEPT ONE 4” 100MM CVD SYSTEM 29 – PERKIN ELMER 300 MICRALIGN 4” 100MM MASK ALIGNERS 2 – VARIAN 3180/3190 4” 100MM CASSETTE SPUTTERING SYSTEMS - (1) SOLD 1 – VARIAN V350D 4” 100MM ION IMPLANTER 3 – HELMUT SEIER SIRIUS 900 4” 100MM DIFFUSION FURNACES 6 To schedule an auction, please call Hilco Industrial at +1 616-732-1800 INSPECTION EQUIPMENT • SUPPORT EQUIPMENT INSpECTION EqUIpMENT 1 – FEI 825I DUAL BEAM FIB INSPECTION TOOL - SOLD 1 – HITACHI S-7080 SCANNING ELECTRON MICROSCOPE 1 – KLA CRS1200 WAFER INSPECTION SYSTEM SUppORT EqUIpMENT 2 – DISCO DFG-83H/6 ROTARY SURFACE GRINDERS QUANTITY OF DNS/SVG/AIO Photoresist Negative/Positive Track Coaters & Developers - ALL SOLD QUANTITY OF PLANT SUPPORT EQUIPMENT Including: Ovens, Gas Cabinets/Panels, Humidifiers, Air Handlers, Scrubbers, Condensers, Chillers, Cooling Towers, Pumps, Etc. For Complete Lot Catalog, Please Visit Our Website www.hilcoind.com For more information, please visit us on the web at www.hilcoind.com 7 OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA AVAILABLE IMMEDIATELY By Order of ON Semiconductor, Assets Surplus to On-Going Operations 6" 150mm and 4" 100mm Semiconductor Fabrication, Lithography, Inspection and Facility Equipment Follow Us on: Piešťany, Slovakia HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved A Hilco Global Company Printed in USA • ONS0506 • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions. Vested in Your Success.
Load more

Recommended publications
  • China's Progress in Semiconductor Manufacturing Equipment
    MARCH 2021 China’s Progress in Semiconductor Manufacturing Equipment Accelerants and Policy Implications CSET Policy Brief AUTHORS Will Hunt Saif M. Khan Dahlia Peterson Executive Summary China has a chip problem. It depends entirely on the United States and U.S. allies for access to advanced commercial semiconductors, which underpin all modern technologies, from smartphones to fighter jets to artificial intelligence. China’s current chip dependence allows the United States and its allies to control the export of advanced chips to Chinese state and private actors whose activities threaten human rights and international security. Chip dependence is also expensive: China currently depends on imports for most of the chips it consumes. China has therefore prioritized indigenizing advanced semiconductor manufacturing equipment (SME), which chip factories require to make leading-edge chips. But indigenizing advanced SME will be hard since Chinese firms have serious weaknesses in almost all SME sub-sectors, especially photolithography, metrology, and inspection. Meanwhile, the top global SME firms—based in the United States, Japan, and the Netherlands—enjoy wide moats of intellectual property and world- class teams of engineers, making it exceptionally difficult for newcomers to the SME industry to catch up to the leading edge. But for a country with China’s resources and political will, catching up in SME is not impossible. Whether China manages to close this gap will depend on its access to five technological accelerants: 1. Equipment components. Building advanced SME often requires access to a range of complex components, which SME firms often buy from third party suppliers and then assemble into finished SME.
    [Show full text]
  • American Semiconductor Equipment Technologies
    t, f • American Semiconductor Equipment Technologies American Semiconductor Equipment Technologies 6110 Variel Avenue Woodland Hills, California 91367 Telephone: (818) 884-5050 (Thousands of Dollars) Balance Sheet (Fiscal year ending 3/31/86) Working Capital $4,375 Long-Term Debt $2,000 Net Worth $3,446 Current Liability to Net Worth 183.75% Current Liability to Inventory 131.89% Total Liability to Net Worth 241.79% Fixed Assets to Net Worth 241.79% Total Employees 150 Operating performance data are not available Source: Dun & Bradstreet SEMS Industry Econometrics © 1987 Dataquest Incorporated May American Semiconductor Equipment Technologies (Material in this section has been compiled from Dun & Bradstreet financials, Dataquest's SEMS data base, and company literature supplied by ASET. For more information on this start-up company, Dataguest clients are invited to use their inquiry privileges.) > ir THE COMPAMY Background American Semiconductor Equipment Technologies (ASET) was formed in February 1986 to pursue both ongoing and newly developing markets for lithographic systems. The Company was organized by Greg Reyes and Ralph Miller with funding of $3.9 million from four venture capital firms. ASET's product line includes i-line wafer steppers, g-line wafer steppers, substrate steppers, standalone image repeaters and pattern generators, and combination systems. 0perat,^7"g aT«d Strategy ASET Corporation currently serves the semiconductor equipment markets in the image patterning area. The Company also looks to develop business in alternate industries, including laser cards, flat panel displays, and hybrid substrates. ASET maintains research efforts directed toward expanding micro- lithographic technology. ASET acquired the assets of TRE Corporation's wafer stepper and pattern generation manufacturing unit early in 1986.
    [Show full text]
  • Silicon Valley Group
    Silicon Valley Group ANNUAL REPORT AND FORM 10-K Silicon Valley Group Enabling integrated circuit manufacturers to win the productivity race by providing leading-edge technology products that maximize yield through innovative design is the driving force of Silicon Valley Group. Our mission is fulfilled when products are delivered and installed on time and top-of-the-line service and support are provided to help customers achieve their productivity objectives. SILICON VALLEY GROUP TECHNOLOGY LEADER We are prepared for growth. a letter to our shareholders AS THE SEMICONDUCTOR GROWTH CYCLE GAINS MOMENTUM, SVG IS WELL POSITIONED FOR THE FUTURE. As the semiconductor industry goes, so too does SVG. The recent industry downturn, which started in 1998 and continued into 1999, presented major hurdles for Silicon Valley Group and its customers. It particularly impacted SVG at a time when our lithography manufacturing capacity and other capabilities had been increased to take advantage of what had been predicted to be a period of unprecedented growth. Managing a downturn is no easy feat. Although our return to profitability in the fourth quarter of the fiscal year was not as vigorous as we would have liked, I am pleased to say that SVG has risen to the challenge. We focused on the long-term health of the Company with cash preservation and investments in research and development (R&D). Our business is cyclical in nature, and I believe that the current upward momentum we are experiencing in the industry is a very positive indicator for the future. This was a very difficult year for SVG.
    [Show full text]
  • Optical Lithography … 40 Years and Holding
    Copyright 2007 Society of Photo-Optical Instrumentation Engineers. This paper was published in SPIE Vol. 6520 (2007) p. 652004, and is made available as an electronic reprint with permission of SPIE. Single print or electronic copies for personal use only are allowed. Systematic or multiple reproduction, or distribution to multiple locations through an electronic listserver or other electronic means, or duplication of any material in this paper for a fee or for commercial purposes is prohibited. By choosing to view or print this document, you agree to all the provisions of the copyright law protecting it. Invited Paper Optical Lithography … 40 years and holding John H. Bruning Corning Tropel Corporation Fairport, NY 14450 ABSTRACT Optical lithography has been the dominant patterning process for semiconductor fabrication for over 40 years. The patterning process evolved initially from methods used in the printing industry, but as integrated circuits became more complex, and as device geometries shrank, sophisticated new imaging methods evolved. Today’s optical lithography systems represent the highest resolution, most accurate optical imaging systems ever produced. This remarkable evolutionary process continues to this day, paced by “Moore’s Law”. The evolutionary development of lithography systems over the last 40 years is reviewed along with a brief discussion of options for the future. Keywords: lithography history, photolithography, optical lithography, immersion, reduction lithography 1. INTRODUCTION The production of microelectronics has made incredible strides over a period of nearly 50 years. The main driver of lithography improvements is reduced device cost. This has come about through improvements in resolution, resulting in more chips per wafer, higher performance devices, and improvements in productivity, all of which continue to reduce the cost per function in integrated circuits.
    [Show full text]
  • Stepper Training Manual
    Stepper Training Overview A Wafer Stepper is a reduction projection exposure tool. An image formed in a chrome-on-glass photomask, called a Reticle, is reproduced on a wafer one “die” at a time by projecting the reticle image onto a wafer positioned below the reduction lens. The wafer, which is coated with a UV light-sensitive polymer film called Photoresist, is moved from one die position to the next by a motorized stage assembly. The reticle image size, up to 88mm x 88mm, is reduced 5 or 4 times by the projection lens making individual die exposures as large as 22mm x 22mm. The positioning of the wafer for exposure under the lens is computer controlled using a laser interferometer system for very high accuracy. Alignment for layer-to-layer overlay can be performed with similar precision. Placement, exposure, and focusing of each exposure is programmable with all operations performed automatically. History Steppers were created to address the problems limiting yield of working devices or “good die” in semiconductor wafer manufacturing. Before this Mask Aligners were exclusively used in photolithographic manufacturing processes. A mask aligner mounts a fixed photomask and has a movable wafer chuck that can bring the wafer and mask into tight contact. Alignment systems are used to view alignment marks on the wafer through the photomask. The photoresist coated wafer is then exposed in one action. However, contact mask aligners could not achieve adequate alignment across wafers as they had no ability to compensate for scaling and orthogonality changes caused by processing or introduced by mask making variations.
    [Show full text]
  • 1. Introduction
    1 1. INTRODUCTION In the past 40 years, the minimum dimension of integrated circuits (ICs) has been shrinking at a rate of 30% smaller feature size every three years, following the so-called Moore’s law. The International Technology Roadmap for Semiconductors (ITRS), an industrial consensus of future technology largely based on Moore’s law, is a 100 page document that suggests that features of complementary metal–oxide–semiconductor (MOS) circuitry will continue to shrink down to at least the 22 nm node. At that node, the half of the centre-to-centre (pitch) of first level of interconnect is 22 nm and the width of the resist feature for the gate electrode is 15 nm; the etched gate electrode is even smaller, about 9 nm (Fig. 1.1). Fig 1.1 There is very good reason for this continued drive to shrink dimensions. Until recently, scaling down all linear dimensions L along with applied voltages led to a proportionate increase in speed and a reduction in energy per computing function to L .Although the former advantage is the most frequently touted, the latter is probably the more significant; even more so as electronics increasingly will be hand-carried. Although the classical scaling laws may not apply quantitatively as we continue to scale down dimensions, it appears that we will get more computing per unit time and per unit energy. Scaling to 22 nm College of Engineering, Chengannur 2 will bring advantages in terms of energy per computing function as well as speed. There may be other ways to reduce power per computing function.
    [Show full text]
  • Alkylated Poly(4-Hydroxystyrene) Derivatives for Deep Ultraviolet Lithography
    Journal of Photopolymer Science and Technology Volume 5, Number 1(1992) 101 -- 110 ALKYLATED POLY(4-HYDROXYSTYRENE) DERIVATIVES FOR DEEP ULTRAVIOLET LITHOGRAPHY D. R. McKean, W. D. 1-Iinsberg, T. P. Sauer, C. G. Willson IBM Research, Almaden Research Center., 650 harry Road, San ,hose, CA 95120-6099 Alkylated Poly(4-hydroxystyrene) copolymers have been prepared and evaluated for use in deep-uv lithography. These materials have been modified to lower the dissolution rates of poly(4-hydroxystyrene) while maintaining the other desirable properties such as optical absorbance, glass transition temperature, and etch resistance. Lower dissolution rates make these polymers more attractive for application in dissolution inhibition resist schemes. The application of these materials to resists employing diazo compound inhibitors and three component resists using acid photogenerators and acid-sensitive dissolution inhibitors is described. I. Introduction Although current resist materials in combination with advanced exposure tools and processing techniques are adequate for the current generation microelectronic device fabrication, new materials will probably he required for the 0.35 micron geometries necessary for 64 MB DRAM devices. This is due to practical resolution limitations imposed by 36.5 nm optical lithography. For higher resolution, shorter wavelength deep-uv irradiation is necessary. A recent survey of Japanese electronics companies indicated that 50% of these memory device manufacturers were planning to use deep-uv lithography for 64 MB DRAM.' The other half will use 365 nm lithography in conjunction with phase shifted masks. The standard diazonaphthoquinonc/novolac resists used at 365 nm are positive working resists which function on the basis of dissolution inhibition.
    [Show full text]
  • Of Components, Packaging and Manufacturing Technology
    50Years of Components, Packaging and Manufacturing Technology IEEE CPMT Society 445 Hoes Lane, PO Box 1331 Piscataway, NJ 08855 telephone: +1 732 562 5529 fax: +1 732 981 1769 email: [email protected] IEEE History Center Rutgers University 39 Union Street New Brunswick, NJ 08901 telephone: +1 732 932 1066 fax: +1 732 932 1193 email: [email protected] ® IEEE 50 YEARS of COMPONENTS, PACKAGING, AND MANUFACTURING TECHNOLOGY The IEEE CPMT Society and its Technologies 1950 - 20 0 0 Contents 1950s ..............................................................................................2-6 Acknowledgements • Components and the Search for Reliability Many people gave • AIEE, IRE, EIA Symposium on Improved unstintingly of their Quality Electronic Components time and expertise to • Dummer’s Prediction help with this project. • Standards • Formation of IRE Professional Group on Component Parts My special thanks go to • Circuit Board Developments Jack Balde, Ron Gedney, • Miniaturization, Heat Dissipation, Hybrid Technologies Charles Eldon, Mauro 1960s.............................................................................................7-13 Walker, and Paul Wesling • IRE Professional Group on Product Engineering and Production for their insights; Dimitry • Commercial Applications Grabbe, who provided • Increasing Density on the Circuit Board access to his first-class • Pure Molding Compounds components collection; • VLSI Workshops and Gus Shapiro, who • Hybrid Circuit • Darnell Report on Reliability shared early material • Telstar on the
    [Show full text]
  • Photolithography
    EE-527: MicroFabrication Photolithography R. B. Darling / EE-527 / Winter 2013 Photolithography • Photo-litho-graphy: latin: light-stone-writing • Photolithography is an optical means for transferring patterns onto a substrate. It is essentially the same process that is used in lithographic printing. • Patterns are first transferred to an imagable photoresist layer. • Photoresist is a liquid film that can be spread out onto a substrate, exposed with a desired pattern, and developed into a selectively placed layer for subsequent processing. • Photolithography is a binary pattern transfer process: there is no gray-scale, no color, and no depth to the image. R. B. Darling / EE-527 / Winter 2013 Key Historical Events in Photolithography • 1826- Joseph Nicephore Niepce, in Chalon, France, takes the first photograph using bitumen of Judea on a pewter plate, developed using oil of lavender and mineral spirits. • 1843- William Henry Fox Talbot, in England, develops dichromated gelatin, patented in Britain in 1852. • 1935- Louis Minsk of Eastman Kodak developed the first synthetic photopolymer, poly(vinyl cinnamate), the basis of the first negative photoresists. • 1940- Otto Suess of Kalle Div. of Hoechst AG, developed the first diazoquinone-based positive photoresist. • 1954- Louis Plambeck, Jr., of Du Pont, develops the Dycryl polymeric letterpress plate. R. B. Darling / EE-527 / Winter 2013 Overview of the Photolithography Process • Surface preparation • Coating (spin casting) • Pre-bake (soft bake) • Alignment • Exposure • Development • Post-bake
    [Show full text]
  • The Rise of Chemically Amplified Photoresists
    Studies in Materials Innovation Center for Patterning the World: The Rise of Contemporary Chemically Amplified Photoresists History and Policy David C. Brock Chemical Heritage Foundation Studies in Materials Innovation Center for Patterning the World: Contemporary History and Policy The Rise of Chemically Amplified Photoresists David C. Brock Chemical Heritage Foundation © 2009 by the Chemical Heritage Foundation. All rights reserved. No part of this publication may be reproduced in any form by any means (electronic, mechanical, xerographic, or other) or held in any information storage or retrieval system without written permission from the publisher. Printed in the United States of America. For information about the Chemical Heritage Foundation, its Center for Contemporary History and Policy, and its publications write: Chemical Heritage Foundation 315 Chestnut Street Philadelphia, PA 19106-2702, USA Fax: (215) 925-1954 www.chemheritage.org Design by Willie•Fetchko Graphic Design Cover: Buckytube and buckyball images, gift of Richard E. Smalley, Chemical Heritage Foundation Collections. Dendrimer images courtesy of Dendritic Nanotechnologies, Inc. CONTENTS I. Executive Summary |3 II. Historical Narrative |5 III. Findings |15 1. Partial Transfer and Hybridization 2. Reciprocal Structuring 3. Imagined Economies 4. Orchestration as Innovation IV. Appendixes |19 1. Method 2. References 3. Acknowledgments and Author’s Note 4. About the Robert W. Gore Materials Innovation Project PATTERNING THE WORLD |3 I. EXECUTIVE SUMMARY he rise of the Digital Age has been predicated on Moore’s law—the observation, turned industrywide goal, that optimal economic advantage comes from T an exponential increase in the performance of electronic components, accom- panied by an exponential decrease in price.
    [Show full text]
  • The Near Impossibility of Making a Microchip
    The Near Impossibility of Making a Microchip The microchip seen here Somebody had to invent machinery is actually smaller than your thumbnail—as shown that could reliably and affordably lay on the last page. Amazingly, fabricators can down patterns with details as small (and must) mass-produce as 80-millionths of an inch. such chips while replicating every detail flawlessly. BY DANIEL P. BURBANK but economical. Achieving this demanded innovations at every step of the manufacturing process. In the late 1950s Jack Kilby at Texas Instruments To visualize the Kilby/Noyce/Moore in Dallas, and Robert Noyce and Gordon Moore, at process, imagine a manic real estate Fairchild Semiconductor near San Jose, California, developer building an entire town at once. independently came up with ways to cram many First hundreds of bulldozers dig all the tiny transistors and resistors onto a small sliver of basements; then a fleet of cement trucks silicon. By adding microscopic wires to pours all the foundations; then an army of interconnect groups of adjacent components, they carpenters completes all the floors, then made the first integrated circuits, which are now the walls, then the upper stories and roofs; known informally as chips. The potential range of and finally all the streets are paved. In this applications was vast, limited only by the power of analogy the individual buildings 1950s imaginations to conceive of refrigerator-size correspond to individual transistors and computers shrunk to the size of a postage stamp. resistors, the streets to connections As with most technological breakthroughs, between them, and the blocks of buildings however, a brilliant idea was only the first step.
    [Show full text]
  • Chronology of Lithography Milestones Atsuhiko Kato
    Chronology of Lithography Milestones Version 0.9 May 2007 Atsuhiko Kato History of lithography as an art form A planographic printing process that makes use of the immiscibility of grease and water. In the lithographic process, ink is applied to a grease-treated image on the flat printing surface; non-image (blank) areas, which hold moisture, repel the lithographic ink. This inked surface is then printed on paper, - Encyclopedia Britannica Alois Senefelder of Munich discovered the basic principle of Lithography, “writing on stone,” around 1798. Working with a highly porous stone, Senefelder sketched his design with a greasy substance, which was absorbed by the stone. He then wetted the entire surface with a mixture of gum Arabic and water (fountain solution). Only the stone areas absorbed the solution; the design area repelled it. Rolling on an ink made of soap, wax, oil and lampblack, this greasy substance coated the design but did not spread over the moist blank area. A clean impression of the design was made when a sheet of paper was pressed against the surface of the stone. ----------- History of Photolithography for semiconductor manufacturing --------- 1959 - GCA acquires David W. Mann. Later develops step & repeat cameras GCA/David W. Mann was the first firm to make a two-stage step and repeat mask reduction device (photo-repeaters) available to semiconductor manufacturers commercially. They first showed the device in the spring of 1961 and sold the first one to Clevite Corporation. Nikon optics was used for these equipment. 1965 - Kulick & Soffa introduces the first commercial contact aligners Contact printing was the work-horse technology for exposing patterns onto IC wafers into the 1970s.
    [Show full text]