DOCSLIB.ORG

Nptf Thread Chart Pdf

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Nptf Thread Chart Pdf Nptf thread chart pdf Continue Thread tube and elbow. The tube has a male NPT wire, while the elbow is female. The American National Standard Pipe Thread standards, often referred to as the National Pipe ThreadIng Standard (NPT), are U.S. national technical standards for screw threads used for threaded pipes and pipe fittings. They contain both narrowing and straight sets of wires for various purposes, including stiffness, pressure tight sealing or both. [1] Different types are named with symbol and full name. Examples of symbols include NPT, NPS, NPTF, NPSC, and others. MIP is an acronym for male iron pipe, and FIP is an acronym for female iron pipe. [2] Outside North America, there are some US tube yarns, as well as many British standard tube yarns and ISO 7-1, 7-2, 228-1 and 228-2 yarns. Types Different types are named with the symbol and full name as follows:[3] Abbreviation[3] Short-term extension Full name[3] Comment[3] NPT National pipe cone American National Standard Taper Pipe Thread Taper Pipe Thread Tapering for Sealing, often without wire seal; interfaces with almost all types of services NPS National tube direct American National Standard Straight Pipe Thread Stiffness; closed only with sealants; sometimes male straight closed with female narrowing low pressure sealing NPSC National pipe straight-coupling American National Standard Straight Pipe Thread for Connectors In common connectors NPSF National pipe straight-fuel Dryseal USA (American) Standard Fuel Internal Straight Pipe Thread Internal, direct NPSH National tube direct hose American National Standard Direct Pipe wire hose switches NPSI National tube straight-space Dryseal USA (American) Standard Intermediate Internal Straight Pipe Thread Similar to NPSF , but slightly larger; internal only, straight NPSL National tube straight-locked American National Standard Straight Tube wire Loose mechanical joints Lock nuts For use with lock nuts NPSM National tube direct-mechanical American National Standard Straight Pipe Thread Freely attached mechanical joints For various rigid mechanical applications NPTF National pipe cone-fuel Dryseal USA (American) Standard Cone pipe thread For drying water connections in almost all services, in particular fuel connections NPTR National pipe cone hand sanitiary line American National Standard Cone pipe thread railing joints PTF-SAE SHORT Pipe cone , fuel, SAE, short dryseal SAE Short cone tube thread named after SAE International; similar to NPTF, but one turn shorter Use Thread tubes can provide a powerful seal for pipes that carry liquids, gases, steam and hydraulic fluid. These yarns are now used in materials other than steel and brass, including PTFE,[4] PVC, nylon, bronze and cast iron. The cone of NPT threads allows them to form a seal when the torque is thread presses against each other, unlike parallel/straight threaded connectors or pressing connectors, where the threads only hold the pieces together and do not provide sealing. Different types of pipe wires are designed to be used both with and without wire seals[1] as required by special applications. Sealing agents, if used, are typically a seal seal of the threading tape or a tube dope of threaded sealing tan (sometimes similar in composition to a plumber's putt). Because the wire body is narrowing (0.75 inches/ft or 62.5 mm/m), the larger diameter condenses into a smaller diameter and finally forms a seal (there is no clearance between the bristles and roots of the wires due to the cone). This means that NPT connectors and converters must be drilled and lubricanted with lubricant, such as lubricationpaste or threaded seal tape. The use of tape also helps to limit corrosion of yarns, which otherwise can make future dismantling almost impossible. Commonly used sizes are 1⁄8, 1⁄4, 3⁄8, 1⁄2, 3⁄4, 1, 1 1⁄4, 1 1⁄2, 2 1⁄2, 3, 4, 5 and 6 inches as tubes and connectors for most US suppliers. Sizes of less than 1⁄8 inches are sometimes used for pressure air, while sizes of more than 6 inches are often associated with other methods. NPT requirements are defined in ANSI/ASME standard B1.20.1. [5] The cone velocity of all NPT yarns is 1 inch diameter at 16 inches (3⁄4 inches per foot or 62.5 millimeters per meter) measured by diameter change (in pipe thread) at thread distance. The angle between the cone tube and the centre axis of the tube is tan−1(1⁄32) = 1,7899° = 1° 47′ 24. The size of the nominal tube (often abbreviated NPS standard, which should not be confused with the direct threaded shape standard symbol NPS) is loosely related to the inner diameter of the Schedule 40 size series. Due to the thickness of the wall of the Schedule tube, the actual diameter of the NPT yarns is larger than the nominal pipe diameter of the outer diameter, and also significantly in small sizes. The wall thickness of a pipe with a different size than schedule 40 remains different, but the outer diameter and thread profile remain the same as schedule 40. Thus, the internal diameter of the Schedule tube's own size differs from the size of the nominal tube, while the outer diameters of the nominal schedule size are the same between schedules. The NPT and NPS threads of threaded shapes have an angle of 60° and their seller's yarn shape (flattened peaks and valleys). The trough between trapez strands is 1⁄8 wide. For external wires, the flat brush is also 1⁄8 of the pitch (thread height 0.64952 * height), but in the internal thread it is 1⁄4 of the pitch (so the wire height is 0.54126 * height). [6] National Tube Cone No, no, no, no. The National Pipe Taper Fuel (NPTF), also called Dryseal American National Standard Taper Pipe Thread, as defined in ASME B1.20.3, is designed to provide a leakier seal without PTFE tape (often referred to by the popular brand name Teflon) or other sealing compound. NPTF threads are the same shape, but the bristle and root heights are adjusted according to the interference, which removes the spiral leak path. Standard Sizes American Society of Mechanical Engineers National Pipe Thread Cone (NPT)[7] Nominal Pipe Size Thread length Thread length[8] Powerful thread[8] Total length[8] Actual outer diameter, OD Tap Length Turns Diameter Length Turns Diameter inch −1 inch inch inch mm 1⁄16 27 0.03703704 0.9407 0.1600 4.32 0.328118 0.2611 7.05 0.2875 0.0.0 3896 0.313 7.950 1⁄8 27 0.03703704 1⁄8 0.03703704 1⁄8 0.03703704 00.9407 0.1615 4.36 0.37360 0.2639 7.13 0.38000 0.3924 0.405 10.287 0.339 8.6106 1⁄4 18 0.05555555 1.4111 0.2278 4.10 0.49163 0.4018 7.23 0.50250 0.5946 0.540 13.716 7⁄16 11.113 ​3⁄8 18 0.05555555 1.4111 0.2400 4.32 0.62701 0.4078 7.34 0.63750 0.6006 0.675 17.145 37⁄64 14.684 ​1⁄2 14 0.07142857 1.8143 0.3200 4.48 0.77843 0.5337 7.47 0.79178 0.7815 0.840 21.3360 23⁄32 18.2563 ​3⁄4 14 0.07142857 1.8143 0.3390 4.75 0.98887 0.5457 7.64 1.00178 0.7935 1.050 26.6700 59⁄64 23.4156 1 ​11 1⁄2 0.08695652 2.2087 0.4000 4.60 1.23863 0.6828 7.85 1.25631 0.9845 1.315 33.4010 1 5⁄32 29.3688 ​1 1⁄ 4 ​11 1⁄2 0.08695652 2.2087 0.4200 4.83 1.58338 0.7068 8.13 1.60131 1.0085 1.660 42.1640 1 1⁄2 38.1000 ​1 1⁄2 ​11 1⁄2 0.08695652 2.2087 0.4200 4.83 1.82234 0.7235 8.32 1.84131 1.0252 1.900 48.2600 1 47⁄64 44.0531 2 ​11 1⁄2 0.08695652 2.2087 0.4360 5.01 2.29627 0.7565 8.70 2.31630 1.0582 2.375 60.3250 2 7⁄32 56.3563 ​2 1⁄2 8 0.12500000 3.1750 0.6820 5.46 2.76216 1.1375 9.10 2.79063 1.5712 2.875 73.0250 2 5⁄8 66.6750 3 8 0.12500000 3.1750 0.7660 6.13 3.38850 1.2000 9.60 3.41563 1.6337 3.500 88.9000 3 1⁄4 82.5500 ​3 1⁄2 8 0.12500000 3.1750 0.8210 6.57 3.88881 1.2500 10.00 3.91563 1.6837 4.000 101.6000 3 3⁄4 95.2500 4 8 0.12500000 3.1750 0.8440 6.75 4.38713 1.3000 10.40 4.41563 1.7337 4.500 114.3000 4 1⁄4 107.9500 ​4 1⁄2 8 0.12500000 3.1750 5.000 127.0000 4 3⁄4 120.6500 5 8 0.12500000 3.1750 0.9370 7.50 5.44929 1.4063 11.25 5.47863 1.8400 5.563 141.3002 5 9⁄32 134.1438 6 8 0.12500000 3.1750 0.9580 7.66 6.50597 1.5125 12.10 6.54063 1.9462 6.625 168.2750 6 11⁄32 161.1313 8 8 0.12500000 3.1750 1.0630 8.50 8.50003 1.7125 13.70 8.54063 2.1462 8.625 219.0750 10 8 0.12500000 3.1750 1.2100 9.68 10.62094 1.9250 15.40 10.66563 2.3587 10.750 273.0500 12 8 0.12500000 3.1750 1.3600 10.88 12.61781 2.1250 17.00 12.66563 2.5587 12.750 323.8500 14 8 0.12500000 3.1750 1.5620 12.50 13.87263 2.2500 18.00 13.91563 2.6837 355.6000 16 8 0.12500000 3.1750 1.8120 14.50 15.87575 2.4500 19.60 15.91563 2.8837 16.000 406.4000 18 8 0.12500000 3.1750 2.0000 16.00 17.87500 2.6500 21.20 17.91563 3.0837 18.000 457.2000 20 8 0.12500000 3.1750 2.1250 17.00 19.87031 2.8500 22.80 19.91563 3.2837 20.000 508.0000 24 8 0.12500000 3.1750 2.3750 19.00 23.86094 3.2500 26.00 23.91563 3.6837 24.000 609.6000 Hand-tight and effective thread engagement lengths History In 1864, William Sellers, the president of Franklin Institute, presented a standard for nuts, bolts, and screws.
Load more

Recommended publications
  • Screw Thread Systems
    Machinery's Handbook 27th Edition TABLE OF CONTENTS THREADS AND THREADING SCREW THREAD SYSTEMS METRIC SCREW THREADS 1725 Screw Thread Forms 1783 American Standard Metric Screw 1725 V-Thread, Sharp V-thread Threads M Profile 1725 US Standard Screw Thread 1783 Comparison with Inch Threads 1725 Unified Screw Thread Forms 1783 Interchangeability 1726 International Metric Thread 1783 Definitions 1727 Definitions of Screw Threads 1784 Basic M Profile 1784 M Crest and Root Form UNIFIED SCREW THREADS 1785 General Symbols 1732 American Standard for Unified 1785 M Profile Screw Thread Series Screw Threads 1785 Mechanical Fastener Coarse Pitch 1732 Revised Standard 1786 M Profile Data 1732 Advantages of Unified Threads 1787 Limits and Fits 1732 Thread Form 1793 Dimensional Effect of Coating 1733 Internal and External Screw 1793 Formulas for M Profile Thread Design Profile 1797 Tolerance Grade Comparisons 1733 Thread Series 1797 M Profile Limiting Dimension 1734 Inch Screw Thread 1798 Internal Metric Thread 1735 Diameter-Pitch Combination 1800 External Metric Thread 1736 Standard Series Combinations 1804 American Standard Metric Screw 1763 Coarse-Thread Series Threads MJ Profile 1764 Fine-Thread Series 1804 Diameter-Pitch Combinations 1764 Extra-Fine-Thread Series 1807 Trapezoidal Metric Thread 1765 Constant Pitch Series 1807 Comparison of ISO and DIN 1766 4-Thread Series Standards 1767 6-Thread Series 1813 Trapezoidal Metric Thread 1768 8-Thread Series 1814 ISO Miniature Screw Threads 1769 12-Thread Series 1814 British Standard ISO Metric Screw 1770 16-Thread Series Threads 1771 20-Thread Series 1814 Basic Profile Dimensions 1772 28-Thread Series 1815 Tolerance System 1773 Thread Classes 1815 Fundamental Deviations 1773 Coated 60-deg.
    [Show full text]
  • QP158 Thread Inspection Procedure Owner: Quality Manager Change History: See DCN for Details Rev Date DCN Number Current Revision E 2018‐0201 DCN15947
    Quality Procedure QP158 Thread Inspection Procedure Owner: Quality Manager Change History: See DCN for Details Rev Date DCN Number Current Revision E 2018‐0201 DCN15947 1. PURPOSE 1.1. This procedure defines the control method for thread inspection to ensure that product meets design requirements. 2. SCOPE 2.1. This procedure applies to manufactured and procured components and tooling with internal or external threads. 3. DEFINITIONS 3.1. Thread ‐ A helical structure used to convert between rotational and linear movement or force. A screw thread is a ridge wrapped as a helix around either a cylinder (a straight thread) or a cone (a tapered thread). Threads can be used as a simple machine or as a fastener. Threads can be left or right‐handed and internal or external. Thread form is the cross‐sectional form of a thread. Inch threads are typically documented by stating the diameter of the thread followed by the threads per inch, such as 3/8‐18 which is a 3/8 inch diameter thread with 18 threads per inch, or by thread angle, which is the angle between the threads. This angle determines the style or type of thread (i.e. NPT, pipe thread). Metric threads are defined by their pitch. Example: M16 x 1.25 x 30 has a pitch of 1.25 and a 16mm major diameter and a length of 30mm. 3.2. Lead Angle ‐ On the straight thread, it is the angle made by the helix of the thread at the pitch line with a plane perpendicular to the axis. Lead angle is measured in an axial plane.
    [Show full text]
  • Acme Thread Pitch Chart Pdf
    Acme thread pitch chart pdf Continue About Us Contact Us Disclaimer ? Privacy PolicyCopyright © 2013-2020 About Us Contact Us Disclaimer ? Privacy PolicyCopyright © 2013-2020 Screw thread profiles with trapezoidal contours This article includes a list of general references, but remains largely unverified because it lacks enough corresponding online appointments. Please help to improve this article by introducing more accurate quotes. (April 2015) (Learn how and when to delete this template message) Metric trapezoidal thread, TR-40×7. Male Acme thread trapezoidal thread shapes are screw thread profiles with trapezoidal contours. They are the most common forms used for lead screws (power screws). They offer high strength and ease of manufacture. They are usually located where large loads are required, such as in a visor or the lead screw of a lathe. [1] Standardized variations include multi-start threads, left threads, and self-centering wires (which are less likely to join under lateral forces). The original shape of the trapezoidal thread, and probably the most commonly found worldwide, with a thread angle of 29o, is the acme thread shape (/-kmi/ AK-me). The Acme thread was developed in 1894 as a very suitable profile for power screws that has several advantages over the square thread,[note 1] which had been the way of choice until then. It is easier to cut with single-point threading or die than the square thread is (because the shape of the thread requires a tool bit or die-tooth geometry that is not suitable for cutting). It is used better than a square thread (because wear can be compensated) and is stronger than a square thread of comparable size.
    [Show full text]
  • 1950 Supplement to Screw-Thread Standards for Federal Services 1944
    U. S. DEPARTMENT OF COMMERCE NATIONAL BUREAU OF STANDARDS 1950 SUPPLEMENT TO SCREW-THREAD STANDARDS FOR FEDERAL SERVICES 1944 1950 Supplement to Handbook H28 (1944) National Bureau of Standards DEC 1 6 1952 78441 QC1 Related Publications .... U51 cop, 2. Screw-Thread Standards for Federal Services, 1944 Screw-thread standards for the Federal Government have been estab¬ lished by the Interdepartmental Screw-Thread Committee of the Army, Navy, Air Force, and Commerce Departments in order to insure the interchangeability of threaded parts. Bolts, nuts, gages, dies, taps, wrenches, and all other items associated with the manufacture of threaded parts have been listed, and definitions of sizes, tolerances, and shapes are fully illustrated by means of drawings and tables. Order NBS Handbook 28 (1944), Screw-Thread Standards for Federal Services, 1944, 274 double-column pages, from the Superintendent of Documents, U. S. Government Printing Office, Washington 25, D. C. Price ?1.00. Unified Screw-Thread Standards An accord for unification of American, British, and Canadian standard systems of screw threads was signed at the National Bureau of Stand¬ ards on November 18, 1948. This circular gives the proceedings of the meeting, together with detailed illustrations, tables, and numerical data setting forth standards of thread form. In the past, international trade in mechanical equipment of all kinds has been seriously handicapped by the lack of interchangeability of screw-thread parts. The adoption of these unified screw-thread stand¬ ards will remove an important barrier to the exchange of manufactured goods throughout the world. Order NBS Circular 479, Unified Screw-Thread Standards, 27 large pages, illustrated, from the Superintendent of Documents, U.
    [Show full text]
  • History of Threaded Pipe Connections
    Jacques Jumeau English version History of technologies linked to heating. Chapter 1 History of threaded pipe connections Copyright: Jacques Jumeau 1st edition 2010/04/23 Copy is allowed, provided you cite the origin: Ultimheat Museum 1 Update 2019/02/21 History of threaded pipe connections At the beginning of the 19th century, the development of pumps and steam engines posed the problem of a simple, solid, waterproof and pressure-resistant connection of metal pipes. Each manufacturer designed their own system and very soon appeared problems of compatibility and maintenance. In 1841 the English engineer and industrialist, Joseph Whitworth, of Manchester, presented to the Institute of Civil Engineers, a memoir to demonstrate the advantage of applying, for railways, navigation and manufactures, a uniform system screw threads, all over England. He gave a table summarizing the main dimensions which were quickly adopted by several companies and builders. Joseph Whitworth focused on determining the pitch, depth, and shape of screw threads to match their diameter. He endeavored to establish such proportions that, while retaining the necessary power of the nets, they present, at the same time, a great solidity, and may serve both for iron and cast iron. It was based on a 55-degree thread angle with rounded roots and crests of threads to save manufacturing tools. This form of threading, was later declined into a cylindrical female part and a conical male part with a taper angle of 1/16 (6.25%) and was then chosen as the most efficient, because it allowed to perform a Pipe sealing on a step.
    [Show full text]
  • Topic 6 Power Transmission Elements II
    FUNdaMENTALS of Design Topic 6 Power Transmission Elements II © 2008 Alexander Slocum 6-0 1/1/2008 Power Transmission Elements II were scaled to create accurate gears for industry and this also helped power the industrial revolution. Screws & gears are transmission elements that warrant a special place in power transmission systems We may never know who the great minds were because of the huge range of power levels at which they who actually had the moment of brilliance to invent are applied and the very high transmission ratios they screws and gears, but we salute these great minds; for can achieve. without screws and gears, which still serve us today, society would grind to a halt, and industry would be The first screws were used perhaps by threaded! Archimedes in 200 BC as pumps to lift water from a river to a field. It is not known when the first power By considering FUNdaMENTAL principles, you screw for lifting a solid load was invented, but it was will better be able to separate marketing hype from likely over a thousand years ago. Like many technolo- engineering reality. Remember Maudslay’s Maxims, gies, the military was a powerful catalyst for develop- and apply them in the context of: ment. One could imagine designers wondering how they could convert rotary motion into linear motion, or • Kinematics: motion, accuracy, space how they could amplify force or torque. With gunpow- • Dynamics: forces, speeds, life der came the need for the manufacture of better gun bar- • Economics: design, build, maintain rels which propelled the fledgling machine tool industry.
    [Show full text]
  • Types of Thread
    TYPES OF THREAD 08-2015 | 1 TYPE OF THREAD WWW.TEESING.COM ABOUT TEESING INDEX WE ENGINEER FROM SOURCE TO PROCESS TECHNICAL SUPPLIER SINCE 1952 Since 1952 Teesing is `The right connection` as the international supplier of fittings, valves, tubing, systems and assemblies for industrial applications in four BASICS OF THREAD sectors: pneumatics, hydraulics, instrumentation and transport of media. With offices in the Netherlands (Rijswijk), U.S.A. (New Jersey), China (Beijing) and Zhubei City (Taiwan) we are globally active in several specialized niche markets, such as semiconductor, railway, alternative fuels, pharmaceutical and (Petro) chemical industries. We supply a complete package of products and services you require for your 1. BASICS OF THREAD connection applications. Through our specialized knowledge of our products and 1.1 Gender 4 markets we are capable in responding quickly to all your questions regarding the 1.2 Handedness 4 transport of gases and liquids to your point of use connection. Thanks to our 1.3 Design 4 engineering department we are also capable of delivering customized products 1.4 Pitch / TPI 5 and assemblies that are developed to meet the specifications of your critical 1.5 Diameter 5 process demands. 1.6 Angle 5 1.7 Crest / root 5 2. MOST COMMON THREADS OUR BUSINESS UNITS 2.1 M - ISO thread (metric) 7 2.2 NPT - Pipe thread 8 2.3 G/R/Rp - Whitworth thread (BSPP/BSPT) 9 INDUSTRIAL APPLICATIONS SUBMICRON TECHNOLOGIES ALTERNATIVE ENERGY 2.4 UNC/UNF - Unified National thread 10 International supplier of International supplier of HP/ International supplier of com- 2.5 Extra: Comparison sheet (M – BSPP – BSPT – NPT – UNC - UNF) 11-15 fittings, valves, tubing, UHP components and assem- ponents, systems and assem- blies from source to process.
    [Show full text]
  • Engineering Design Representation 2
    Fastener Handout Introduction: Engineering Design Representation 2 Threads 2 Effect of thread angle on strength: 3 Standardization of Threads: 4 Descriptions of the Thread Series: 4 Class fit: 5 Specification of Metric Threads: 6 Local Notes (callouts) 8 Counterbore specification: 9 Countersink specification: 9 Writing notes for threaded holes: 10 Threaded Mechanical Fasteners 13 Clamping Force: 14 Cap Screws: 14 Machine Screws: 15 Set Screws: 15 Appendix A Fastener Head Dimension Tables 21 Appendix B Recommended Fastener Torques 28 Appendix C Bolt Grade Markings and Strength Chart 29 Appendix D Letter and Number Decimal Equivalents 31 Introduction: Engineering Design Representation Despite advances, 2D mechanical drawings are still the most popular format for design documentation. Automated extraction techniques allow mechanical drawings to be developed directly from 3D geometric models, simplifying the process. However, some elements of design representation not easily conveyed through the model database and therefore not as easily extracted to 2D drawings. Many of these elements are notational in nature. Some examples include thread specifications, surface finishes, surface quality, and dimension tolerances. This handout will focus on the standards of annotation for fasteners, and hole callouts (local notes). Annotation standardization is provided by the ASME Y14 series of standards. These standards call for the expanded use of symbology in annotation. This is due to the international understandability of symbols. The table at right shows the current standard symbols commonly used in mechanical drawings along with the out-dated “abbreviation” form. We will discuss this topic further when covering Geometric Dimensioning and Tolerance. Threads Screw threads serve three basic functions in mechanical systems; 1) to provide a clamping force 2) to restrict or control motion, and 3) to transmit power.
    [Show full text]
  • Lead Errors in Commercial Screw Threads, Taps, and Dies
    DEPARTMENT OP ^^H'^ERCE Le1;tei BUREAU OP 'STSj’NDARDS Circular WASHING-^ N L C 108 D^ei^er 81, 1933 LEAD ERRORS IN COillffiRCIAL SCRE?/ THREADS, TAPS, AND DIES by D. R. Miller and I. H, Fullcier (This letter circular is to be offered for publication as a Technologic Paper of the Bureau of Standards, it is P'^esented in this form for consideration and criticism by those interested in the subject). ABSTRACT The decrease in strength and tendency toward loosening of a screw thread fastening, resulting from lead errors in the threads, necessitates the control of their magnitude within proper limits. Lead error equivalents of tolerances on effect- ive size, which is determined by the fitch diameter, lead error, and angle etrpr, specified for four classes of fit of commercial threaded prCduct by the National Scrsv; Tnread Corrmission, are tabulated* In order that the maintenance of the magnitude of lead errors to within specified limits may be practicable, in the quantity :,-roduction cf screw threads, efficient means and methods of control must be available. Such control first requires the,.. elimination, so far as practicable, of the causes of the three .types cf lead error, namely, progressive, local, and periodic," which are listed. Four methods of control by gaging are described, and control by the inspection of threading tools is discussed. The problem of distortion of taps and chasers in' '.hardening is analyzed, and a bibliography relating to the hardening of steel with mir-imum distortion is appended. • ; 't*T •5 - 3 - Recommended lead, angle, and pitch diameter tolerances for ordinary commercial and for ground solid taps, and lead and angle tolerances for chasers in adjustable taps and dies are derived and tabulated.
    [Show full text]
  • Thread Data Chart Index
    MARYLAND METRICS THREAD DATA CHARTS THREAD DATA CHART INDEX • METRIC THREAD -- COARSE PITCH -- M • METRIC THREAD -- FINE PITCH -- M (1 mm - 28 mm) • METRIC THREAD -- FINE PITCH -- M (30 mm - 64 mm) • METRIC THREAD -- FINE PITCH -- M (65 mm - 100 mm) • PIPE THREAD -- BRITISH STANDARD PIPE PARALLEL -- BSPP/BSPF • PIPE THREAD -- JAPANESE PIPE PARALLEL -- PF (see BSPP/BSPF chart) • PIPE THREAD -- BRITISH STANDARD PIPE TAPER -- BSPT • PIPE THREAD -- JAPANESE PIPE TAPER -- PT (see BSPT chart) • PIPE THREAD -- METRIC TAPER PIPE -- MT • BRITISH THREAD -- COARSE PITCH -- BSW • BRITISH THREAD -- FINE PITCH -- BSF • BRITISH THREAD -- MINIATURE SERIES -- BA • METRIC THREAD -- COARSE PITCH -- MINIATURE SERIES -- BS 4827 -- S • METRIC 80 degree Pg form THREAD -- ELECTRICAL THREAD -- Pg • METRIC 60 degree M form THREAD -- ELECTRICAL THREAD -- M • METRIC THREAD -- Aerospace threads MJ • METRIC 30 degree Tr form THREAD -- TRAPEZOIDAL THREAD (~Acme) -- Tr • METRIC BUTTRESS COARSE THREAD -- DIN 513 • METRIC KNUCKLE THREAD -- DIN 405 • METRIC KNUCKLE THREAD -- DIN 20400 • METRIC SCREW THREAD INSERT THREADS - for HELICAL WIRE INSERTS -- Eg M • BRITISH ET -- ELECTRICAL THREAD -- (Conduit to BS 31) • BRITISH STANDARD CYCLE -- BSC • BRITISH STANDARD BRASS -- BSB • BRITISH WHITWORTH -- GAS CYLINDER THREAD -- DIN 477 • TIRE VALVE SCREW THREAD -- DIN 7756 • BICYCLE SCREW THREAD -- DIN 79012 • CYCLE ENGINEER INSTITUTION THREAD -- CEI • IMPERIAL WIRE GAUGE – IWG spoke thread data • USA THREAD -- UNIFIED COARSE -- UNC • USA THREAD -- UNIFIED FINE -- UNF • USA THREAD -- UNIFIED EXTRA FINE -- UNEF • USA THREAD -- NATIONAL PIPE TAPERED THREAD -- NPT • METRIC THREAD [coarse & fine] -- Extended Thread Size Range (online only) • Tapping drill sizes for taps in a multilingual format for thread types: M, MF, EG M, EG MF, G, Rp, Rc/PT, Pg, MJ, W cyl, Tr, W tap, BSW, BSF, BA, NPT, NPTF, UNC, UNF, UNEF, UN, EG UNC(STI), EG UNF(STI), UNJC, UNJF, & NPSM METRIC THREAD -- COARSE PITCH -- M Click here to return to the thread data chart page index.
    [Show full text]
  • Gedore-Katalogtemplate, V2
    www.thread-gages.com THREAD GAUGES ISO METRIC thread gauges (2 - 200 mm) The metric thread is the most common type of thread around the world, used for joining various components. This was one of the first international stan- dards agreed when the International Organization for Standardization (ISO) was set up in 1947. The standard specifies tolerances for e.g. 4H, 5H, 6H, 6G and 7H for thread plugs (to check internal threads) and 4h, 6g, 6e, 6az, 8g, etc. for thread rings (to check external threads). Specification: Metric thread properties: Basic dimension: ISO 965 Part 1,2,3 – 1998 thread angle: 60°; Gauging practice: ISO 1502 – 1996 H = 0.866025 x P; UNIFIED thread gauges (No.4 - 8“) The UNIFIED thread has the same 60° profile as the ISO metric screw thread but the characteristic dimensions of each UTS thread (Unified Thread Stan- dard) were chosen in inch fraction rather than a round millimeter value. The UTS thread is most commonly used in USA and Canada. For thread plugs (to check internal threads) the most used tolerance classes are 1B, 2B and 3B and for thread rings (to check external threads) 1A, 2A and 3A. The tolerance class 2B/2A corresponds to medium fit and is used for general applications which require free assembly. UN thread properties: Specification: thread angle: 60°; Gauging practice: ANSI/ASME B1.2 – 1983 or B.S. 919 Part I - 2007 H = 0.866025 x P; GAS thread gauges (G1/8“ - G6“) The Gas thread (G) is a straight thread used for interconnecting pipes, also known in the trade as BSPP, NPS or G.
    [Show full text]
  • Power Screws
    Module 6 Power Screws Version 2 ME, IIT Kharagpur Lesson 1 Power Screw drives and their efficiency Version 2 ME, IIT Kharagpur Instructional Objectives At the end of this lesson, the students should be able to understand • Power screw mechanism. • The thread forms used in power screws. • Torque required to raise and lower a load in a power screw • Efficiency of a power screw and condition for self locking. 6.1.1 Introduction A power screw is a drive used in machinery to convert a rotary motion into a linear motion for power transmission. It produces uniform motion and the design of the power screw may be such that (a) Either the screw or the nut is held at rest and the other member rotates as it moves axially. A typical example of this is a screw clamp. (b) Either the screw or the nut rotates but does not move axially. A typical example for this is a press. Other applications of power screws are jack screws, lead screws of a lathe, screws for vices, presses etc. Power screw normally uses square threads but ACME or Buttress threads may also be used. Power screws should be designed for smooth and noiseless transmission of power with an ability to carry heavy loads with high efficiency. We first consider the different thread forms and their proportions: Square threads- The thread form is shown in figure-6.1.1.1. These threads have high efficiency but they are difficult to manufacture and are expensive. The proportions in terms of pitch are: h1= 0.5 p ; h2 = 0.5 p - b ; H = 0.5 p + a ; e = 0.5 p a and b are different for different series of threads.
    [Show full text]