DOCSLIB.ORG

Made in the USA Table of Contents

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Made in the USA Table of Contents Made In The USA Table of Contents History.......................................................................................... 3 Cold.Chisels................................................................................. 4 Punches....................................................................................... 7 Masonry...................................................................................... 14 Floor/Electrician/Wood............................................................... 21 Nail.Sets..................................................................................... 23 TargetGuard®.Tools..................................................................... 24 Bars............................................................................................ 25 Hammer,.Sledge.&.Replacement.Handles................................. 29 Angle.Finders............................................................................. 30 Miscellaneous............................................................................. 31 Kits............................................................................................. 33 Assortments............................................................................... 36 Contact.Information.................................................................... 37 dascopro.com • 800-327-2690 Made In The USA 2 Our Story DASCO PRO, Inc. has been in the forged hand tool industry since 1922. Our company has been a leader of innovation, new packaging and superior technology. In 1984, DASCO merged with angle finder manufacturer Pro Products and formed DASCO PRO, Inc. Today DASCO PRO, Inc. offers the highest quality line of striking tools, a complete line of angle finders, fiberglass replacement handles, and boundary marker/reflectors. Our production facilities include three manufacturing plants in Rockford, IL. totaling 216,000 square feet. The upset head on the largest striking tools was developed and trademarked as Targethead® tools in 1948. This feature gives a large surface to strike and allows protection to the hand holding the tool. The DASCO PRO TargetGuard® tool holder is featured on all of our best selling Targethead® struck tools. The TargetGuard® offers a 3 ¾” circle of protection against glancing blows and missed hits. Our TargetGuard® is made of a special blend of durable molded plastic that is permanently force-fit around the shaft of select striking tools and is a DASCO PRO exclusive. It features a full 360-degree handhold for a firm, comfortable grip. We pad print our tools with epoxy ink that is easily legible to the customer, giving size, tool name, model number, warnings and “Made in USA” information. All products have an individual UPC code. Our company is EDI integrated. DASCO PRO is a member of the American Hardware Manufacturers Association. dascopro.com • 800-327-2690 Made In The USA 3 COLD CHISELS Cold Chisels DASCO PRO cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Item # Description Length UPC Pack. CARDED 018371- . 400-0. 1/4”.COLD.CHISEL. 4-7/8”. 040006. 3 . 401-0. 5/16”.COLD.CHISEL. 5-1/4”. 040105. 3 . 402-0. 3/8”.COLD.CHISEL. 5-5/8”. 040204. 3 . 405-0. 1/2”.COLD.CHISEL. 6-3/8”. 040501. 3 . 406-0. 5/8”.COLD.CHISEL. 6-3/4”. 040600. 3 . 408-0. 3/4”.COLD.CHISEL. 7-1/8”. 040808. 3 . 413-0. 7/8”.COLD.CHISEL. 7-1/2”. 041300. 3 . 417-0. 1”.COLD.CHISEL. 7-7/8”. 041706. 3 BULK 018371- . 400. 1/4”.COLD.CHISEL. 4-7/8”. 004008. 3 . 401. 5/16”.COLD.CHISEL. 5-1/4”. 004015. 3 . 402. 3/8”.COLD.CHISEL. 5-5/8”. 004022. 3 . 405. 1/2”.COLD.CHISEL. 6-3/8”. 004053. 3 . 406. 5/8”.COLD.CHISEL. 6-3/4”. 004060. 3 . 408. 3/4”.COLD.CHISEL. 7-1/8”. 004084. 3 . 413. 7/8”.COLD.CHISEL. 7-1/2”. 004138. 3 . 417. 1”.COLD.CHISEL. 7-7/8”. 004176. 3 dascopro.com • 800-327-2690 Made In The USA 4 COLD CHISELS Long Cold Chisels DASCO PRO long cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Item # Description Length UPC Pack. CARDED 018371- . 441-0. 1/2”.LONG.COLD.CHISEL. 12”. 044103. 3 . 410-0. 3/4”.LONG.COLD.CHISEL. 12”. 041003. 3 . 415-0. 7/8”.LONG.COLD.CHISEL. 12”. 041508. 3 . 419-0. 1”.LONG.COLD.CHISEL. 12”. 041904. 3 . 337-0. 1-1/4”.X.12”.FLAT.UTILITY.CHISEL. 12”. 033701. 3 . BULK 018371- . 441. 1/2”.LONG.COLD.CHISEL. 12”. 004411. 3 . 407. 5/8’.LONG.COLD.CHISEL. 12”. 004077. 3 . 410. 3/4”.LONG.COLD.CHISEL. 12”. 004107. 3 . 411. 3/4”.X.18”.LONG.COLD.CHISEL. 12”. 004114. 3 . 415. 7/8”.LONG.COLD.CHISEL. 12”. 004152. 3 . 419. 1”.X.12”.LONG.COLD.CHISEL. 12”. 004190. 3 . 420. 1”.X.18”.LONG.COLD.CHISEL. 12”. 004206. 3 . 337. 1-1/4”.FLAT.UTILITY.CHISEL. 12”. 000352. 3 Cold Chisel Kits DASCO PRO cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Item # Description Pieces UPC Pack. CARDED 018371- . 29. 4.PIECE.KIT. 4. 502368. 3 . 44. 3.PIECE.KIT. 3. 000635. 3 dascopro.com • 800-327-2690 Made In The USA 5 COLD CHISELS Cold Chisels With TargetGuard® The DASCO PRO Cold Chisel with TargetGuard® is designed for shearing nuts, bolts, rivets and other materials. Its large target head striking area reduces mushrooming and protects hands from missed hits. Item # Description Length UPC Pack. 018371- G410. 3/4”.LONG.COLD.CHISEL.W/TG. 12”. 001038. 3 . G417. 1”.COLD.CHISEL.W/TG. 7-7/8”. 001069. 3 . G419. 1”.LONG.COLD.CHISEL.W/TG. 12”. 001076. 3 . G337. 1-1/4”.FLAT.UTILITY.CHISEL.W/TG. 12”. 001014. 3 dascopro.com • 800-327-2690 Made In The USA 6 PUNCHES Center Punches DASCO PRO Center punches have a precision ground point for making accurate hole starting easier. Made of high carbon steel that has been heat treated. Use on metals softer than their point. Item # Description Length UPC Pack. CARDED 018371- . 530-0. 1/4”.CENTER.PUNCH. 4”. 053006. 3 . 531-0. 5/16”.CENTER.PUNCH. 4-1/2”. 053105. 3 . 532-0. 7/16”.CENTER.PUNCH. 5”. 053204. 3 . 534-0. 1/2”.CENTER.PUNCH. 5-1/2”. 053402. 3 . BULK 018371- . 528. 3/16”.CENTER.PUNCH. 4”. 503051. 3 . 529. 5/32”.CENTER.PUNCH. 4”. 503068. 3 . 530. 1/4”.CENTER.PUNCH. 4”. 005302. 3 . 531. 5/16”.CENTER.PUNCH. 4-1/2”. 005319. 3 . 532. 7/16”.CENTER.PUNCH. 5”. 005326. 3 . 534. 1/2”.CENTER.PUNCH. 5-1/2”. 005340. 3 dascopro.com • 800-327-2690 Made In The USA 7 PUNCHES Prick Punches DASCO PRO Prick punches are used to mark and scribe work pieces. Made of high carbon steel that has been heat treated. Use on metals softer than their points. Item # Description Length UPC Pack. CARDED 018371- . 539-0. 1/4”.PRICK.PUNCH. 4”. 053907. 3 . 540-0. 5/16”.PRICK.PUNCH. 4-1/2”. 054003. 3 . 541-0. 3/8”.PRICK.PUNCH. 5”. 054102. 3 . BULK 018371- . 539. 1/4”.PRICK.PUNCH. 4”. 005395. 3 . 540. 5/16”.PRICK.PUNCH. 4-1/2”. 005401. 3 . 541. 3/8”.PRICK.PUNCH. 5”. 005418. 3 Starter Punches Starter punches are used to loosen frozen pins and keys. Item # Description Length UPC Pack. CARDED 018371- . 562-0. 3/32”.STARTER.PUNCH. 5-1/2”. 056205. 3 BULK 018371- . 562. 3/32”.STARTER.PUNCH. 5-1/2”. 005623. 3 dascopro.com • 800-327-2690 Made In The USA 8 PUNCHES Solid Punch DASCO PRO Solid Punches are made of heat treaded high carbon steel. It is a perfect tool for loosening frozen or tight pins and keys or knocking out rivets. Once loosened, follow up with a pin punch to drive the pin or key out. It can be used on any softer metal. Item # Description Length UPC Pack. CARDED 018371- . 564-0. 1/8”.SOLID.PUNCH. 5”. 502399. 3 . 565-0. 5/32”.SOLID.PUNCH. 5-1/2”. 502405. 3 . 566-0. 3/16”.SOLID.PUNCH. 7”. 502412. 3 . 568-0. 7/16”.SOLID.PUNCH. 9”. 502429. 3 . 569-0. 1/4”.SOLID.PUNCH. 7”. 502436. 3 . BULK 018371- . 560. 1/16”.SOLID.PUNCH. 4-1/2”. 503075. 3 . 561. 3/32”.SOLID.PUNCH. 4-1/2”. 503082. 3 . 563. 7/32”.SOLID.PUNCH. 3-1/4”. 503099. 3 . 564. 1/8”.SOLID.PUNCH. 5”. 502894. 3 . 565. 5/32”.SOLID.PUNCH. 5-1/2”. 502900. 3 . 566. 3/16”.SOLID.PUNCH. 7”. 502917. 3 . 568. 7/16”.SOLID.PUNCH. 9”. 502924. 3 . 569. 1/4”.SOLID.PUNCH. 7”. 502931. 3 . 572. 5/16”.SOLID.PUNCH. 6-1/4”. 503105. 3 dascopro.com • 800-327-2690 Made In The USA 9 PUNCHES Pin Punch DASCO PRO Pin punches are used to remove a pin or key. Use a pin punch that is one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Item # Description Length UPC Pack. CARDED 018371- . 581-0. 3/32”.PIN.PUNCH. 5-1/2”. 058100. 3 . 582-0. 1/8”.PIN.PUNCH. 5-1/2”. 058209. 3 . 583-0. 5/32”.PIN.PUNCH. 5-1/2”. 058308. 3 . 584-0. 3/16”.PIN.PUNCH. 5-1/2”. 058407. 3 . 588-0. 7/32”.PIN.PUNCH. 6”. 000666. 3 . 589-0. 1/4”.PIN.PUNCH. 6”. 058902. 3 . 590-0. 5/16”.PIN.PUNCH. 6”. 059008. 3 . 592-0. 1/16”.PIN.PUNCH. 4-1/2”. 059206. 3 . BULK 018371- . 581. 3/32”.PIN.PUNCH. 5-1/2”. 005814. 3 . 582. 1/8”.PIN.PUNCH. 5-1/2”. 005821. 3 . 583. 5/32”.PIN.PUNCH. 5-1/2”. 005838. 3 . 584. 3/16”.PIN.PUNCH. 5-1/2”. 005845. 3 . 588. 7/32”.PIN.PUNCH. 6”. 005883. 3 . 589. 1/4”.PIN.PUNCH. 6”. 005890. 3 . 590. 5/16”.PIN.PUNCH.
Load more

Recommended publications
  • AABTKJX0 Giesecke ©2004 by Prentice Hall, Inc
    Figure Number: 03-01 AABTKJX0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: Principal Items of Equipment. Figure Number: 03-02 AABTKJY0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: The T-square. Figure Number: 03-03 AABTKJZ0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: Testing the Working Edge of the Drawing Board. Figure Number: 03-04 AABTKKA0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: Testing the T-square. Figure Number: 03-05 AABTKKB0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: Placing Paper on Drawing Board. Figure Number: 03-06 AABTKKC0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: Positions of Drafting Tape. Figure Number: 03-07 a-c AABTKKD0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: Drawing Pencils. Hard Medium Soft The hard leads in this group (left) These grades are for general These leads are too soft to be useful are used where extreme accuracy purpose work in technical drawing. in mechanical drafting. Their use for is required, as on graphical com- The softer grades (right) are used such work results in smudged, rough putations and charts and diagrams. for technical sketching, for letter- lines that are hard to erase, and the The softer leads in this group ing, arrowheads, and other free- lead must be sharpened continually. (right) are sometimes used for line hand work on mechanical These grades are used for art work work on engineering drawings, but drawings.
    [Show full text]
  • Surveying and Drawing Instruments
    SURVEYING AND DRAWING INSTRUMENTS MAY \?\ 10 1917 , -;>. 1, :rks, \ C. F. CASELLA & Co., Ltd II to 15, Rochester Row, London, S.W. Telegrams: "ESCUTCHEON. LONDON." Telephone : Westminster 5599. 1911. List No. 330. RECENT AWARDS Franco-British Exhibition, London, 1908 GRAND PRIZE AND DIPLOMA OF HONOUR. Japan-British Exhibition, London, 1910 DIPLOMA. Engineering Exhibition, Allahabad, 1910 GOLD MEDAL. SURVEYING AND DRAWING INSTRUMENTS - . V &*>%$> ^ .f C. F. CASELLA & Co., Ltd MAKERS OF SURVEYING, METEOROLOGICAL & OTHER SCIENTIFIC INSTRUMENTS TO The Admiralty, Ordnance, Office of Works and other Home Departments, and to the Indian, Canadian and all Foreign Governments. II to 15, Rochester Row, Victoria Street, London, S.W. 1911 Established 1810. LIST No. 330. This List cancels previous issues and is subject to alteration with out notice. The prices are for delivery in London, packing extra. New customers are requested to send remittance with order or to furnish the usual references. C. F. CAS ELL A & CO., LTD. Y-THEODOLITES (1) 3-inch Y-Theodolite, divided on silver, with verniers to i minute with rack achromatic reading ; adjustment, telescope, erect and inverting eye-pieces, tangent screw and clamp adjustments, compass, cross levels, three screws and locking plate or parallel plates, etc., etc., in mahogany case, with tripod stand, complete 19 10 Weight of instrument, case and stand, about 14 Ibs. (6-4 kilos). (2) 4-inch Do., with all improvements, as above, to i minute... 22 (3) 5-inch Do., ... 24 (4) 6-inch Do., 20 seconds 27 (6 inch, to 10 seconds, 403. extra.) Larger sizes and special patterns made to order.
    [Show full text]
  • MICHIGAN STATE COLLEGE Paul W
    A STUDY OF RECENT DEVELOPMENTS AND INVENTIONS IN ENGINEERING INSTRUMENTS Thai: for III. Dean. of I. S. MICHIGAN STATE COLLEGE Paul W. Hoynigor I948 This]: _ C./ SUPP! '3' Nagy NIH: LJWIHL WA KOF BOOK A STUDY OF RECENT DEVELOPMENTS AND INVENTIONS IN ENGINEERING’INSIRUMENTS A Thesis Submitted to The Faculty of MICHIGAN‘STATE COLLEGE OF AGRICULTURE AND.APPLIED SCIENCE by Paul W. Heyniger Candidate for the Degree of Batchelor of Science June 1948 \. HE-UI: PREFACE This Thesis is submitted to the faculty of Michigan State College as one of the requirements for a B. S. De- gree in Civil Engineering.' At this time,I Iish to express my appreciation to c. M. Cade, Professor of Civil Engineering at Michigan State Collegeafor his assistance throughout the course and to the manufacturers,vhose products are represented, for their help by freely giving of the data used in this paper. In preparing the laterial used in this thesis, it was the authors at: to point out new develop-ants on existing instruments and recent inventions or engineer- ing equipment used principally by the Civil Engineer. 20 6052 TAEEE OF CONTENTS Chapter One Page Introduction B. Drafting Equipment ----------------------- 13 Chapter Two Telescopic Inprovenents A. Glass Reticles .......................... -32 B. Coated Lenses .......................... --J.B Chapter three The Tilting Level- ............................ -33 Chapter rear The First One-Second.Anerican Optical 28 “00d011 ‘6- -------------------------- e- --------- Chapter rive Chapter Six The Latest Type Altineter ----- - ................ 5.5 TABLE OF CONTENTS , Chapter Seven Page The Most Recent Drafting Machine ........... -39.--- Chapter Eight Chapter Nine SmOnnB By Radar ....... - ------------------ In”.-- Chapter Ten Conclusion ------------ - ----- -.
    [Show full text]
  • Instruments and Methods of Physical Measurement
    INSTRUMENTS AND METHODS OF PHYSICAL MEASUREMENT By J. W. MOORE, . i» Professor of Mechanics and Experimental Philosophy, LAFAYETTE COLLEGE. Easton, Pa.: The Eschenbach Printing House. 1892. Copyright by J. W. Moore, 1892 PREFACE. 'y'HE following pages have been arranged for use in the physical laboratory. The aim has been to be as concise as is con- sistent with clearness. sources of information have been used, and in many cases, perhaps, the ipsissima verba of well- known authors. j. w. M. Lafayette College, August 23,' 18g2. TABLE OF CONTENTS. Measurement of A. Length— I. The Diagonal Scale 7 11. The Vernier, Straight 8 * 111. Mayer’s Vernier Microscope . 9 IV. The Vernier Calipers 9 V. The Beam Compass 10 VI. The Kathetometer 10 VII. The Reading Telescope 12 VIII. Stage Micrometer with Camera Lucida 12 IX. Jackson’s Eye-piece Micrometer 13 X. Quincke’s Kathetometer Microscope 13 XI. The Screw . 14 a. The Micrometer Calipers 14 b. The Spherometer 15 c. The Micrometer Microscope or Reading Microscope . 16 d. The Dividing Engine 17 To Divide a Line into Equal Parts by 1. The Beam Compass . 17 2. The Dividing Engine 17 To Divide a Line “Originally” into Equal Parts by 1. Spring Dividers or Beam Compass 18 2. Spring Dividers and Straight Edge 18 3. Another Method 18 B. Angees— 1. Arc Verniers 19 2. The Spirit Level 20 3. The Reading Microscope with Micrometer Attachment .... 22 4. The Filar Micrometer 5. The Optical Method— 1. The Optical Lever 23 2. Poggendorff’s Method 25 3. The Objective or English Method 28 6.
    [Show full text]
  • Measuring and Layout
    DRILLING DRILLING MEASURING AND LAYOUT TAPE MEASURES CHALK LINES/PLUMB BOBS DIGITAL MEASURING PRECISION MEASURING RULERS/SQUARES LEVELS PROTRACTORS MARKING TOOLS AND FLAGGING TAPES Measuring and Layout 1 TAPE MEASURES INDUSTRIAL TAPE MEASURES - SAE INDUSTRIAL TAPE MEASURES - SAE/METRIC • Durable nylon coated blade • Durable nylon coated blade • High contrast blade for easy reading • High contrast blade for easy reading • Impact resistant case with rubberized grip • Impact resistant case with rubberized grip • Easy slide lock in any position • Easy slide lock in any position Item # Size Item # Size 27904 1" x 16' 27902 5/8" x 10' (3M) 27906 1" x 25' 27908 1" x 25' (7.5M) NEW PROFESSIONAL TAPE MEASURES - SAE/ PROFESSIONAL TAPE MEASURES - SAE METRIC • Impact resistant rubberized case • Impact resistant rubberized case • Easy-to-read black and red markings • Easy-to-read black and red markings • Slide-down bar locks tape in any position • Slide-down bar locks tape in any position • Tru-zero hook and removable belt clip • Tru-zero hook and removable belt clip Item # Size Item # Size Item # Size Item # Size 27914 1" x 16' 27922 1-1/4" x 16' 27916 1" x 16' (5M) 27924 1-1/4" x 16' (5M) 27918 1" x 25' 27926 1-1/4" x 25' 27920 1" x 25' (7.5M) 27928 1-1/4" x 25' (7.5M) 2 Measuring and Layout Tape Measures/Long Tapes NEW 1" X 25' TAPE MEASURE FRACTIONAL 1" X 25' (7.5M) TAPE MEASURE MARKINGS - SAE DOUBLE SIDED - SAE/METRIC • Easy read fractional markings • Best when taking measurements at a height • Impact resistant rubberized case • Impact resistant
    [Show full text]
  • A Manual of the Principal Instruments Used In
    THE UNIVERSITY OF ILLINOIS LIBRARY 02Co^ REMOTE STORAGE CENTRAL CIRCULATION BOOKSTACKS The person charging this material is re- ' sponsible for its return to the library from which it was borrowed on or before the Latest Date stamped below. Theft, mutiletiorv and underlining of books are reosons for disciplinory action and may result In dismissal from the University. TO RENEW CALL TELEPHONE CENTER, 333-8400 UNIVERSITY OF ILLINOIS LIBRARY AT URBANA-CHAMPAIGN When renewing by phone, write new due date below previous due date. L162 . Digitized by the Internet Archive in 2017 with funding from University of Illinois Urbana-Champaign Alternates : ija- https://archive.org/details/manualofprincipa00wleg_5 Lifmm' Of THE 4 Miidt' l)y W., .V '{irilT'RILilhi'T, T’ISW'iY. R, T : OF THE PRINCIPAL INSTRUMENTS USED IN Jimfrifan dpiiginening aiiij Swrljegiitg, MANUFACTURED BY W. & L. E. GURLEY. THE LIBRARY RF THE tJSlVEfiSlTy OF JLIINOIS. THIRD EDITION. TROY, N. Y. PUBLISHED BY W. & L. E. GURLEY. Entered according to Act of Congress, in the year 1855 ^ BY W. & L. E, GURLEY, In the Clerk’K Office of the District Court for the Northern District of New York. 0 , 5^(,,3 remote Q365-yvi3 m UBBARY OF THE Li^®. 24 1933 I >/? -J *** ILUNOBi COMPASSES. n? n/)^ Plain, with Jacob Staff rnountmgs, 4 inch needle, $20,00 (< (( (( U i( (< (( g 25.00 “ “ '‘ 6 . 28.00 “ “ “ Vernier, 6 . 35,00 “ “ Rail Road, 6-^ §5,00 Compass Tripod, with Cherry legs,. J 5,00 “ “ lev’g screws and Clamp and Tang’t moTem’t, 12,00 “ “ “ “ “ “ “ without “ 10,00 Compound Tangent Ball 4,00 Brass Cover for compass glass, 1,00 TRANSITS.
    [Show full text]
  • General Workshop
    CARPENTRY INTRODUCTION Wood is an important engineering material that is extensively used in the buildings and industries. ‘Timber’ is another name for wood, which is obtained from exogeneous trees. “Wood Working” means processing of wood by hand and machines for making articles of different shapes and sizes. It is further divided into two groups; (1) Carpentry (2) Pattern making. Carpentry is the common term used with any class of work with wood. Pattern making deals with the type and construction of wooden patterns. Steel Rule Four fold rule Flexible tape Blade Try square Stock List of Tools I. Marking and Measuring tools 1. Pencil 9. Combination square 2. Steel rule 10. Marking Knife (Scriber) 3. Four fold rule 11 Marking Gauge 4. Flexible tape 12 Mortise Gauge 5. Straight Edge 13. Wing compass 6. Try square 14. Trammel (beam compass) 7. Mitre Square 15 Calipers (Outside and Inside) 8. Bevel Square 16. Spirit level and plumb bob II. Cutting tools A. Saws B. Chisels C. Axes (a). Saws (b). Chisels 1. Hand Saw a. Firmer Chisel (Cross cut saw) 2. Rip Saw b. Bevel edged 3. Tenon saw (Back saw) c. Pairing Chisel 4. Panel Saw d. Mortise chisel 5. Dovetail Saw e. Gouges (Inside & outside) (c). Axes a. Side Axe b. Adze III. Planinng Tools a. Jack plane (wooden & Metal) b. Smoothing plane c. Rebate plane d. Spoke shave e. Trying plane f. Plough plane g. Router plane Bevel Square Marking knife Mortise gauge Marking gauge Marking pin IV. Boring Tools a. Gimlet b. Bradawl c. Brace (Ratchet & Wheel brace) d.
    [Show full text]
  • Ohio State Univ., Columbus. Center for Vocational EDES PRICE
    DOCUMENT RESUME ED 135 959 08 CE 009 748 AUTHOR Cooper, Gloria S., Ed.; Magisos, Jool H., Ed. TITLE Metrics for Architectural, Civil, Mechanical Drafting. INSTITUTION Ohio State Univ., Columbus. Center for Vocational Education. SPONS AGENCY Bureau of Occupational and Adult Education (DHEW/OE), Washington, D.C. PUB DATE 76 CONTRACT OEC-0-74-9335 NOTE 69p.; For related documents see CE 009 736-790 EDES PRICE MF-$0.83 HC-$3.50 Plus Postage. DESCRIPTORS *Architectural Drafting; *Architecture; *Civil Engineering; Communications; *Curriculum; Engineering Draw:Ing; Instructional Materials; Learning Activities; Mass Media; Measurement Instruments; *Metric System; Secondary Education; Teaching Techniques; Units of Study; *Vocational Education ABSTRACT Designed to meet the job7related metric measurement needs of architectural, civil, mechanical drafting:students, this instructional package is one of six for the.communication media occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package.is intended for students who already know the occupational terminology, measurement terms, and tools currently in use. Each of the.five units in this instructional package contains performance .objectives,,learning activities, and supporting information in the.form.of text, exercises,-and tables. In addition, suggested teaching techniques are included. At the .back of the package:are objectivebased:evaluaticon items, a page of answers to the exercises and tests,.a listof metric materials needed for theactivites, references, and a list of suppliers. The material is designed to accommodate.a variety of individual teaching and.learning styles,. e.g., independent'study, small group, or whole-class activity. Exercises areisitendd to facilitate experiences with measurement instruments, tools, and .devices used in this occupation and job-related tasks of estimating and measuring.
    [Show full text]
  • Competency C1
    Trades Access Common Core Line C: Tools and Equipment Competency C-1: Describe Common Hand Tools and Their Uses Image to be placed here. B.C. Open Textbook Project open.bccampus.ca OpenEd Trades Access COMMON CORE Line C: Tools and Equipment Competency C-1: Describe Common Hand Tools and Their Uses Acknowledgments and Copyright To learn more about BCcampus Open Textbook project, visit http://open.bccampus.ca © Camosun College. The Trades Access Common Core resources are licensed under the Creative Commons Attribution 4.0 Unported Licence ( http://creativecommons.org/licenses/by/4.0/ ), except where otherwise noted. Under this licence, any user of this textbook or the textbook contents herein must provide proper attribution as follows: • If you redistribute this textbook in a digital format (including but not limited to EPUB, PDF, and HTML), then you must retain on every page the following attribution: Download for free at http:// open.bccampus.ca/find-open-textbooks/ • If you redistribute this textbook in a print format, then you must include on every physical page the following attribution: Download for free at http://open.bccampus.ca/find-open-textbooks/ • If you redistribute part of this textbook, then you must retain in every digital format page view (including but not limited to EPUB, PDF, and HTML) and on every physical printed page the following attribution: Download for free at http://open.bccampus.ca/find-open-textbooks/ • If you use this textbook as a bibliographic reference, then you should cite it as follows: BCcampus, Name of Textbook or OER. DATE. http://open.bccampus.ca/find-open-textbooks/.
    [Show full text]
  • United States Patent (19) [11] 3,925,898 Melnik (45) Dec
    United States Patent (19) [11] 3,925,898 Melnik (45) Dec. 16, 1975 54 RULER-BEAM 3,378,879 4/1968 Stall.................................... 6/93 D 76) Inventor: George Melnik, 907 Nottingham FOREIGN PATENTS OR APPLICATIONS Road, Newark, Del. 19711 481,619 1 / 1970 Switzerland......................... 16/93 D 378,486 7/1964 Switzerland......................... 16793 D 22 Filed: July 29, 1974 5,213 12/19 Austria ................................. 33/158 (21) Appl. No.: 492,435 Primary Examiner-Harry N. Haroian 52 U.S. Cl.................................... 33/27 C: 33/158 57 ABSTRACT (51 int. Cl............................................. B43L 9/04 A beam compass consisting of a rectangular channel 58 Field of Search........... 33/27 C, 27 R, 158-160 shaped beam with circular bulb-shaped edges, de signed to engage two parallel circular grooves on flat 56) References Cited disc-shaped sliders. This type of design provides ut UNITED STATES PATENTS most precision and accuracy in a beam compass with 760,353 5/1904 Stone.................................... 33/158 out the necessity of auxillary apertances such as 453,876 5/1923 Hunter.... ... 33/143 M threaded locking nuts, leaf springs, wheels or thumb 1,653,016 2/1927 Mellor.............................. 33/158 X nutS. l,670,509 5/1928 Jung...................................... 33.1158 2,423,779 7/1947 Kahn................................. 33/107 R 1 Claim, 6 Drawing Figures U.S. Patent Dec. 16, 1975 3,925,898 s s (E)D 3,925,898 1 2 trated there are no thumb nuts, screws, inner leaf RULER-BEAM - springs or nuts to secure a slider to the beam. This invention relates to drafting instruments and These and other objects of my invention will appear more particularly to an instrument that is adapted to from the following description, made in conjunction perform functions other than a compass.
    [Show full text]
  • Table of Contents
    Table of Contents Teaching and Learning The Metric System Unit 1 1 - Suggested Teaching Sequence 1 - Objectives 1 - Rules of Notation 1 - Metric Units, Symbols, and Referents 2 - Metric Prefixes 2 - Linear Measurement Activities 3 - Area Measurement Activities 5 - Volume Measurement Activities 7 - Mass (Weight) Measurement Activities 9 - Temperature Measurement Activities 11 Unit 2 12 - Objectives 12 - Suggested Teaching Sequence 12 - Metrics in this Occupation 12 - Metric Units For Architectural, Civil and Mechanical Drafting - Trying Out Metric Units 13 - Building With Metrics 14 - Drafting With Metrics 15 - Drawing With Metrics 16 17 Unit 3 18 - Objective 18 - Suggested Teaching Sequence 18 - Metric-Metric Equivalents 18 - Changing Units at Work 20 Unit 4 21 - Objective 21 - Suggested Teaching Sequence 21 - Selecting and Using Metric Instruments, Tools and Devices 21 - Which Tools for the Job? 22 - Measuring Up in Architectural Drafting 22 - Which Tools for the Job? 23 - Measuring Up in Civil Drafting 23 - Which Tools for the Job? 24 - Measuring Up in Mechanical Drafting 24 Unit 5 25 - Objective 25 - Suggested Teaching Sequence 25 - Metric-Customary Equivalents 25 - Conversion Tables 26 - Any Way You Want It 27 Testing Metric Abilities 28 Answers to Exercises and Test 30 Tools and Devices List References TEACHING AND LEARNING THE METRIC SYSTEM This metric instructional package was designed to meet job-related Unit 2 provides the metric terms which are used in this occupation metric measurement needs of students. To use this package students and gives experience with occupational measurement tasks. should already know the occupational terminology, measurement terms, and tools currently in use. These materials were prepared with Unit 3 focuses on job-related metric equivalents and their relation­ the help of experienced vocational teachers, reviewed by experts, tested ships.
    [Show full text]
  • 1900 Stanley
    This is a reproduction of a library book that was digitized by Google as part of an ongoing effort to preserve the information in books and make it universally accessible. https://books.google.com of tbe inntversit^ of Wisconsin MATHEMATICAL DRAWING and MEASURING INSTRUMENTS, CONSTRUCTION, USES, QUALITIES,. SELECTION, PRESERVATION, and SUGGESTIONS for IMPROVEMENTS, WITH HINTS UPON DRAWING, COLOURING, CALCULATING SUN PRINTING, LETTERING, &c. WILLIAM FORD STANLEY. " La main de l'homme, la seule machine dp lVsprit." A. Dk Lamartine. SEVENTH EDITION. PUBLISHED BY E. & F. N. SPON, 125 STRAND. NEW YORK: SPON & CHAMBERLAIN, 12 Cohtlandt Street; AND BY THIS AUTHOR, at r, GREAT TURXSTILE, HOLBORN, LONDON", W.C. 1900 Price Five Shillings, PREFACE TO THE SEVENTH EDITION. In this edition about one hundred pages of new matter with many illustrations have been added, from the desire to embrace all recent improve ments in drawing instruments up-to-date. The whole matter has also been revised, to drop out descriptions of many instruments that have become obsolete, the defects of which were pointed out in early editions, when suggestions were made for improvements which were at the time original, but have now become general, and are adopted by the profession and the trade. W. F. S. Great Turnstile, June, 1 900. 4 4 I CONTEN T S. CHAPTER I. PAGE Introduction — Arrangement of Instruments in Cases — Defini tions — Metals Used — Qualities and Finish ... 1 CHAPTER II. Instruments for producing Fine Lines — Drawing Pens — Mapping Pens, etc. .11 CHAPTER III. Instruments for producing Broad Lines, Double Lines, Dotted Lines, Transfer, etc. — Bordering Pen — Road Pon and Pencil — Wheel Pens — Tracer — Pricker .
    [Show full text]