Lancia Fulvia Coupe
Total Page:16
File Type:pdf, Size:1020Kb
CAMS 5TH CATEGORY - HISTORIC RACING GROUP Sb APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with an Historic Log Book, cars need to comply with these specifications, the physical appearance shown in the illustrations and the general historic rules as detailed in the current CAMS Manual of Motor Sport. Make of Car: Lancia Model: Fulvia Coupe 1.2, 1.3, 1.3S Coupe HF 1.2 Rally 1.3S, Rally HF 1.3 2nd Series 1.3S Fulvia 3 Monte Carlo, Safari Period of Original Manufacture: 1965 - 1976 CAMS Historic Group: Sb Date of Issue of this Document: Last update of this Document: 30 September 2011 This form was issued without alteration or erasure. SECTION 1 - CHASSIS 1.1 CHASSIS FRAME Description: Platform Period of Manufacture: Manufacturer: Lancia 1965 - 1970 Chassis no. from: 818 Series (See Attached List) Chassis no. location: Material: Mild Steel Comments: None 1.2 FRONT SUSPENSION Description: Independent - Double Wishbone Spring medium: Transverse Leaf Damper Type: Telescopic Adjustable: No Anti-sway bar: Yes Adjustable: No Suspension adjustable: No Method: Comments: 1.3 REAR SUSPENSION Description: Tubular Beam Axle Spring medium: Semi elliptic Leaf Damper type: Telescopic Adjustable: No Anti-sway bar: Yes Adjustable: No Suspension adjustable: No Method: Comments: 1.4 STEERING Type: Worm & Peg Make: Lancia Comments: None 1.5 BRAKES Front Rear Type: Disc Disc Dimensions: Material of drum/disc Cast Iron Cast Iron No. cylinders/pots per wheel: 1 or 2 1 Actuation: Hydraulic Hydraulic Caliper: Make, Material, Type: Dunlop - Cast Iron Dunlop - Cast Iron Master cylinder make: Lockheed/Superduplex Type: Tandem Adjustable bias No Servo Fitted Yes Comments: None This form was issued without alteration or erasure. SECTION 2 - ENGINE 2.1 ENGINE Make: Lancia Model: Fulvia 1.2, 1.3, 1.6 No. cylinders: 4 Configuration: V4 Cylinder Block-material: Aluminium Four Stroke Bore - Original: (1200) (1300) (1600) Max. (1200) (1300) (1600) 76mm 77mm 82mm allowed: 77.5mm 78.5mm 83.5mm Stroke - original: 67mm 69.7mm 75mm Max. 67mm 69.7mm 75mm allowed: Capacity - original: 1216cc 1298cc 1584cc Max. 1262cc 1350cc 1641cc allowed: Cooling method: Water Identifying marks: None Comments: None 2.2 CYLINDER HEAD Make: Lancia No. of valves/cylinder- 2 Inlet: 1 Exhaust: 1 No. of ports total: 8 Inlet: 4 Exhaust: 4 No. of camshafts: 2 Location: Head Drive: Chain Valve actuation: Direct Spark plugs/cylinder: 1 Identifying marks: - Comments: 2.3 LUBRICATION Method: Dry Sump Oil cooler standard: Allowed Location: Comments: 2.4 IGNITION Type: Coil & Distributor Make: Marelli Comments: 1600cc - Magnetti Marelli Distributor S 139A Fitting Kit: FK720 Performance Kit: CEK160 or CEK150 1300cc - Magnetti Marelli Distributor S105C , Ducellier 4206A Distributor Fitting Kit: FK 316 Performance Kit: CEK160 or CEK150 2.5 FUEL FEED Carburettor: Make: Weber Model: 34 DOC No: 2 or Solex 35 PHH No: 2 or Solex 40 DDHF No: 2 Supercharged: N/A Type: Make: N/A Comments: This form was issued without alteration or erasure. SECTION 3 - TRANSMISSION 3.1 CLUTCH Make: Lancia Type: Dry Plate Diameter: 200 mm No. of Plates: 1 Actuation: Comments : 3.2 TRANSMISSION Type: Lancia Make: Lancia Model: No. forward speeds: 4 (2nd Series Rallye & HF - 5 speed) Gearbox location: Gearchange type and location: Bolted to Engine Case material: Aluminium Identifying marks: Comments: 3.3 FINAL DRIVE Make: Lancia Model: Wheel drive method: Front Ratios: Free Differential: Free Type: Comments: 3.4 TRANSMISSION SHAFTS (EXPOSED) Number: 2 Location: Transaxle to Front Wheels Description: Individual Drive Shafts with C/V Joints Comments: 3.5 WHEELS & TYRES Wheel type: Original: Steel Material: Original: Steel Allowed: Allowed: Period Alloy Fixture method: Bolt On No. studs: 1200/1300 1600 Wheel dia. & rim width Original: 4.5 x 14 4.5 x 14 Allowed 5 x 14 (1300cc) 6 x 14 (1600cc) Tyre section: Original: 145 SR - 14 (2nd Series 165 SR-14) Allowed: 175 - 14 185 x 14 Aspect ratio - minimum: 60% 60% Comments: This form was issued without alteration or erasure. SECTION 4 - GENERAL 4.1 FUEL SYSTEM Tank Location: Boot - Floor Capacity: Fuel pump, type and location: Make: Comments: 4.2 ELECTRICAL SYSTEM Voltage: 12 Alternator fitted: Yes Battery Location: Under Bonnet Comments: 4.3 BODYWORK Type: Coupe Material: Steel No. of seats: 2 No. doors: 2 Comments: 4.4 DIMENSIONS Track - Front: 1300 mm Rear: 1280 mm Wheelbase: 2330 mm Overall length: 3975 mm Dry weight: Comments: 4.5 SAFETY EQUIPMENT Fire extinguisher required Seat belt required Rollbar optional RP:kb-Lancia Fulvia-sb1.doc This form was issued without alteration or erasure. .