Laboratory Essentials

Total Page:16

File Type:pdf, Size:1020Kb

Laboratory Essentials LABORATORY ESSENTIALS COVID-19 SPECIAL WWW.WESTINDIGO.COM LABORATORY COVID-19 ESSENTIALS SPECIAL Test tube with screw cap Cylindrical test tubes, PS Cryotubes of PP 1. Autclavable and non-sterile. Supplied on demand Code Capacity Pack 2. Suitable for freezers, ultrafreezers or liquid BGD042 10 ml 1000 pcs 1. Code BGB021 and BGB023 are delivered nitrogen (vapour phase only). BGD043 10 ml b/200 sterile single packed. BGD044* 10 ml 750 pcs Code Capacity Pack Code Capacity Pack BGD045* 15 ml 750 pcs BGN001 2 ml B/500 BGB020 12 ml 1.500 pcs BGD046 15 ml 700 pcs BGN002 5 ml B/200 BGB021 12 ml 1.500 pcs BGD047 20 ml 500 pcs BGB022 30 ml 400 pcs BGD048 20 ml 500 pcs BGB023 30 ml 400 pcs Petri Dish aseptic, PS Sterile Sterile single packed PCR microtubes, PP * Supplied on demand Microtube strips for PCR, PP 1. Made of polystyrene. Edge of lip beveled to facilitate the sliding of the bottom. Aseptic and ventilated 1. Conical bottom, with flat lid. 2. Sterilizable in autoclave and can be also PACK: B/500 units 1. Conical bottom, lid strip included. frozen at -20ºC. 2. Sterilizable in autoclave and can be also Code Capacity 3. Supplied in bag of 1000 units. frozen at -20 ºC. BRB040 90 mm Code Capacity Pack: B/200 units BGN003 0,2 m Code Strip Capacity Micro centrifuge tube HQ BGN006 8 0,2 mL Feaces container, PS BGN007 12 0,2 mL Urine container, PS 1. All our HQ centrifuge tubes are biologically inert and certified and guaranteed to be 1. Made of polystyrene and spoon of polypro- free from DNAse, RNAse, pyrogen and pylene. Stopper and spoon in one piece. endotoxins. 1. Made of polystyrene. Screw cap of Code Capacity Pack polypropylene PACK: B/1000 units BGQ002 15 mL 1.000 pcs BGQ036 60 mL 360 pcs Code Capacity Pack Code Capacity Sterile BGQ042* 60 mL 400 pcs BGQ037 200 ml 500 pcs BGN027 1,7 mL No BGQ043 200 ml 200 pcs BGN007 12 0,2 mL * Sterile BGQ051 60 ml 600 pcs BGQ052 60 ml 400 pcs West Indigo Solutions LLC TEL: +1 (281) 971-4890 2 9950 Westpark Dr. Ste 205 Houston, TX Email: [email protected] 77063 United States of America Web: www.westindigo.com LABORATORY COVID-19 ESSENTIALS SPECIAL Microscope slides frosted band Microscope slides frosted band Cover slides 1. Dimensions: 76x26 mm. Thickness 1/1.2 mm 1. Dimensions: 76x26 mm. Hydrophilic 1. Thickness: 0.13/0.16 mm treatment. For human biology. PACK: Pack of 50 units. 2. Thickness 1/1.2 mm PACK: Pack of 100 units. Code Edges PACK: Pack of 50 units. Code Dimensions Corner 90º BPD001 12x12 mm Code Edges BPB018 Cut BPD002 18x18 mm Corner 90º BPB019 Ground BPD003 20x20 mm BPB036 Cut Corner 45º BPD004 22x22 mm BPB020 Ground beveled BPD007 4x40 mm BPB044 Ground BPD008 4x50 mm BPD009 24x60 mm Cardboard trays FEATURED!! CENTRIFUGE TUBES HIGH QUALITY-HQ 1. For standard microscopes slide: 76x26 mm Code Slides Cover BPG001 2 Yes BPG003 4 Yes Centrifuge tubes BPG004 10 Numbered Hight Quality - HQ BPG005 20 Numbered BPG006 20 No Slide dispenser 1. Biologically inert, free from DNAse, RNAse, pyrogen and endotoxin 2. Biologically inert, free from DNAse, RNAse, pyrogen and endotoxin. Large and clear graduation on the body of the tubes. Great writing area resistant to chemical and physical corrosion. 3. Tubes of 15 mL FCR:17.000 g and tubes of 50 mL 20.000 g PACK: B/25 units Code Capacity Bottom Packaging Sterile BGD082 15 mL Conic 25 units/bag No BGD083 15 mL Conic 25 units/rack No 1. Made of ABS plastic. BGD084 15 mL Conic 25 units/bag Yes 2. Capacity for 90 standard size slides: BGD085 50 mL Conic 25 units/bag No 76x26mm BGD086 50 mL Conic 25 units/rack No BGD087 50 mL Conic 25 units/bag Yes Code Dimensions BGD088 50 mL Self standing 25 units/rack No BPG012 12x10x16,5 cm BGD089 50 mL Self standing 25 units/rack Yes West Indigo Solutions LLC TEL: +1 (281) 971-4890 9950 Westpark Dr. Ste 205 Houston, TX Email: [email protected] 3 77063 United States of America Web: www.westindigo.com LABORATORY COVID-19 ESSENTIALS SPECIAL Plastic boxes Universal cassettes with lid Universal cassettes with lid 1. For standard microscopes slide: 76x26 mm 1. Made of polyoxymethylene (POM) with lid 1. Made of polyoxymethylene (POM) with lid totally resistant to solvents and decalcifying totally resistant to solvents and decalcifying Code Slides Opening agents used in histological techniques Large agentes used in histological techniques BPG007 2 Hinged labelling surfaces Large labelling surfaces. BPG008 5 Hinged PACK: B/250 units PACK: B/250 units BPG009 25 2 pieces Code Slides BPG010 50 Hinged* Code Colour Slides BPG011 100 Hinged* BPJ001 1x5 mm BPJ002 Blue 1x5 mm BPJ003 Pink 1x5 mm * Numbered Biopsy cassettes with lid BPJ004 Yellow 1x5 mm Biopsy cassettes with lid BPJ005 Green 1x5 mm Embedding cassettes, without lid 1. Made of polyoxymethylene (POM) with lid 1. Made of polyoxymethylene (POM) with lid totally resistant to solvents and decalcifying Totally resistant to solvents and decalcifying agentes used in histological techniques 1. Made of polyoxymethylene (POM) totally agentes used in histological techniques. Indicated for biopsy. resistant to solvents and decalcifying PACK: B/250 units PACK: B/250 units agentes used in histological techniques. Code Colour Slides Large labelling surfaces Code Slides BPJ007 Blue 1x1 mm PACK: B/500 units BPJ006 1x1 mm BPJ008 Pink 1x1 mm BPJ009 Yellow 1x1 mm Code Slides Embedding cassettes, without lid BPJ010 Green 1x1 mm BPJ011 2 mm Embedding ring Embedding ring 1. Made of polyoxymethylene (POM), completely resistant to organic solvents. 1. Made of high quality ABS plastic. PACK: B/500 units 1. Made of high quality ABS plastic. 2. Colour: White. PACK: B/500 units Code Colour Slides Code Colour Ring diameter BPJ012 Blue 2 mm PACK: B/500 units BPJ017 Yellow 25x25 mm BPJ013 Pink 2 mm Code Ring diameter BPJ018 Green 25x25 mm BPJ014 Yellow 2 mm BPJ016 25x25 mm BPJ019 Pink 25x25 mm BPJ015 Green 21 mm BPJ020 Blue 25x25 mm West Indigo Solutions LLC TEL: +1 (281) 971-4890 4 9950 Westpark Dr. Ste 205 Houston, TX Email: [email protected] 77063 United States of America Web: www.westindigo.com LABORATORY COVID-19 ESSENTIALS SPECIAL Sponges for histological cassettes Sponges for histological cassettes Schiefferdecker staining jar 1. Blue synthetic. Calibrated porosity. Easy PACK: bag of 1000 units. 1. For 10 microscope slides 76x26 mm in a insert into the tissur embedding cassette. horizontal position (maximum 20 slides). Very useful for small specimens. Code BPJ044 With glass lid PACK: Bag of 500 units. Coplin staining jar Code For microscope slides Code Dimensions BPL003 76x26 cm BPJ021 32x26x2,5 mm Complete staining jar Base mould 1. For 5 microscope slides 76x26 mm in a vertical position. With glass lid PACK: Bag of 500 units. 1. Made of pressed glass. With tray, handle and glass lid. For standard microscope 1. Made of stainless steel. To produce paraffin Code For microscope slides slides of 26x76mm blocks during sample processing. BPL005 76x26 cm 2. Capacity 10 slides vertical position. Capacity Code Dimensions 20 slides back to back. BPJ040 7x7x6 mm Hausser Gedigk staining jar Code Code Dimensions* BPJ041 15x15x6 mm BPL010 75x60x95 mm BPJ042 24x24x6 mm * Inner dimensions BPJ043 30x24x6 mm Stainless steel support Hellendahl staining jar 1. Made of pressed glass. With glass lid Code Capacity Dimensions BPL012 30 Slides 85x85x95 mm BPL013 60 Slides 85x85x150 mm 1. For Hausser-Gedigk staining racks. Made of 1. For 8 microscopes slides 76x26 mm in a stainless steel. vertical position. With glass lid Code Capacity Code For microscope slides BPL028 60 BPL001 76x26 cm West Indigo Solutions LLC TEL: +1 (281) 971-4890 9950 Westpark Dr. Ste 205 Houston, TX Email: [email protected] 5 77063 United States of America Web: www.westindigo.com LABORATORY COVID-19 ESSENTIALS SPECIAL L-shape bacteriology loops PP Freezing rack for cryotubes Erlenmeyer flask, narrow neck 1. Disposable and sterile for bacteriology. 1. With transparent lid, made of Code Capacity Special 100º angle for easier use. polycarbonate. CDB012 25 mL 2. Numbered positions in lid and base. CDB013 50 mL Code Pack Pack BRG004 Indivudal 1000 pcs Code Capacity Colour CDB014 100 mL BRG005 5 units. 80x5 pcs BYF017 81x1.8 ML Red CDB015 250 mL BYF018 81x1.8 ML Orange CDB016 500 mL BYF019 81x1.8 ML Yellow CDB017 1000 mL BYF020 81x1.8 ML Blue Inoculating loops CDB018 2000 mL Loop end for Kolle handle CDB019 3000 mL Beaker round bottom, narrow neck 1. Made of polystyrene. Sterile. Neutral color With needle for inoculation. 1. Made of nickel chromium. 2. Total lenght 43 mm Code Capacity Pack Code Capacity Height BRG006 1 μL 20x20x20 Code Description CDJ001 50 mL 105 mm BRG007 10 μL 20x20x20 BRG011 Loop 3 mm CDJ002 100 mL 108 mm Beaker low form CDJ003 250 mL 140 mm Kolle handle CDJ004 500 mL 180 mm CDJ005 1000 mL 210 mm CDJ006 2000 mL 270 mm CDJ007 5000 mL 345 mm Flask Erlenmeyer with screw Code Capacity CBC015 25 mL 1. Includes 2 loops (Ni-Cr) CBC016 50 mL Code Length Handle CBC017 100 mL BRG009 200 mm Plastic CBC018 150 mL BRG010 290 mm Metal CBC019 250 mL Code GL Capacity CBC020 400 mL CDB039 25 100 ml CBC021 600 mL CDB040 32 250 mm CBC022 800 mL CDB041 32 500 ml CBC023 1000 m CDB042 32 1000 ml CBC024 2000 m CDB043 45 250 ml CBC025 3000 m CDB044 45 500 ml CBC026 5000 m CDB045 45 1000 ml West Indigo Solutions LLC TEL: +1 (281) 971-4890 6 9950 Westpark Dr.
Recommended publications
  • Laboratory Equipment Used in Filtration
    KNOW YOUR LAB EQUIPMENTS Test tube A test tube, also known as a sample tube, is a common piece of laboratory glassware consisting of a finger-like length of glass or clear plastic tubing, open at the top and closed at the bottom. Beakers Beakers are used as containers. They are available in a variety of sizes. Although they often possess volume markings, these are only rough estimates of the liquid volume. The markings are not necessarily accurate. Erlenmeyer flask Erlenmeyer flasks are often used as reaction vessels, particularly in titrations. As with beakers, the volume markings should not be considered accurate. Volumetric flask Volumetric flasks are used to measure and store solutions with a high degree of accuracy. These flasks generally possess a marking near the top that indicates the level at which the volume of the liquid is equal to the volume written on the outside of the flask. These devices are often used when solutions containing dissolved solids of known concentration are needed. Graduated cylinder Graduated cylinders are used to transfer liquids with a moderate degree of accuracy. Pipette Pipettes are used for transferring liquids with a fixed volume and quantity of liquid must be known to a high degree of accuracy. Graduated pipette These Pipettes are calibrated in the factory to release the desired quantity of liquid. Disposable pipette Disposable transfer. These Pipettes are made of plastic and are useful for transferring liquids dropwise. Burette Burettes are devices used typically in analytical, quantitative chemistry applications for measuring liquid solution. Differing from a pipette since the sample quantity delivered is changeable, graduated Burettes are used heavily in titration experiments.
    [Show full text]
  • 10. Resource Requirement for Medical Laboratory Technology
    10. RESOURCE REQUIREMENT FOR MEDICAL LABORATORY TECHNOLOGY 10.1 PHYSICAL RESOURCES 10.1.1. SPACE REQUIREMENT The total space for lecture halls, laboratories may be worked out as per latest AICTE norms 10.1.2 LIST OF EQUIPMENT Note: All the glass wares to be of Borosil make The chemicals may be purchased of reputed make. Sr. Item Quantity No. LIST OF CHEMICALS FOR CHEMISTRY LABORATORY 1. Ferrous ammonium sulphate (Analytical reagent) 3 x 500 grams 2. Oxalic Acid (A.R) 2 x 500 grams 3. Potassium Permanganate (BDH) 3 x 500 grams 4. Sodium Hydroxide (BDH) 2 x 500 grams 5. Sulphuric Acid (AR) 5 litre 6. Hydrochloric Acid (AR) 5 litre 7. Sodium carbonate (A.R) 2 x 500 grams 8. Phenolphthalen (BDH/Merck) 10 grams 9. Methyl orange (SDH) 10 grams 10. Ethyl Alcohol 4 x 500 ml 11. Methyl Alcohol 500 ml 12. Nitric acid 5 litre 13. Glacial Acetic Acid (CP) 1 litre 14. Ammonium sulphate (BDH) 250 grams 15. Copper sulphate (BDH) 500 grams 16. Glucose (BDH) 500 grams 17. Sucrose (BDH) 500 grams 18. Acetone (BDH) 500 grams 19 Potassium Hydroxide (BDH) 2 x 500 grams 20. Iodine 1 x 500 grams 21. Calcium Chloride (BDH) 500 grams 93 Sr. Item Quantity No. 22 NaCl 500 gms 23. Ferric chloride (BDH) 500 grams 24. Starch pH 7.0 500 grams 25. Fructose 250 grams. 26. Gelatin 500 grams. 27. Benzaldehyde 500 ml 28. Ether 500 ml 29. Carbon Tetrachloride 500 ml 30. Ferrous Bicarbonate 500 grams 31. Sodium Bicarbonate 500 grams 32. Albumin 500 grams 33.
    [Show full text]
  • Practical Laboratory Skills for Molecular Biologists.Pdf 3.0 MB
    Practical laboratory skills for molecular biologists skills best practice training training best practice skills Practical laboratory skills for molecular biologists First Edition 2016 Co-authors Elena Sanchez Timothy Wilkes Contributors Nicholas Redshaw Acknowledgements With special thanks to Alison Woolford and Vicki Barwick for their help in the production of this guide. Production of this Guide was funded by the UK National Measurement System. First edition 2016 ISBN: 978-0-948926-28-0 This publication should be cited as: E Sanchez, T Wilkes, Practical laboratory skills for Copyright © 2016 LGC molecular biologists, LGC 2016. ISBN: 978-0-948926-28-0 Practical laboratory skills for molecular biologists OBJECTIVES OF THIS GUIDE 3 1 WORKING IN THE LABORATORY 4 1.1 Health and Safety issues 4 1.2 Laboratory environment 10 1.3 Equipment 14 1.4 Method selection 15 2 MEASURING VOLUME 16 2.1 Types of equipment available 16 2.2 Markings on equipment used for volumetric measurements 22 2.3 Selecting a suitable piece of equipment 24 2.4 Cleaning and maintenance of volumetric equipment 26 2.5 Checking the accuracy of volumetric equipment 27 2.6 Checklists for making measurements of volume 28 3 MEASURING MASS 33 3.1 Mass versus weight 33 3.2 Types of balance available 33 3.3 Selecting a suitable balance 34 4 QUANTIFICATION OF NUCLEIC ACID MATERIAL 41 4.1 Measurement of nucleic acid concentration using UV spectroscopy 41 4.2 Fluorescent based systems. 43 4.3 Gel electrophoresis 45 5 MEASURING PH 47 5.1 What is pH? 47 5.2 Equipment for measuring
    [Show full text]
  • BLAUBRAND® Volumetric Instruments and Density Bottles
    BLAUBRAND® Volumetric Instruments and Density Bottles Testing Instructions (SOP) March 2015 1. Introduction The standard DIN EN ISO 4787 describes both the design and the testing of the volumetric instruments of glass. The following Testing Instructions describe how to apply the ISO standard in practice. We recommend a testing every 1-3 years. The interval depends on the using of aggressive media and the cleaning procedure. These Instructions may also be used as a basis for the supervision of testing devices to DIN EN ISO 9001, DIN EN ISO 10012 and DIN EN ISO/IEC 17025. The test of the Density Bottles was effected on the basis of DIN EN ISO 4787. Meniscus adjustment with BLAUBRAND® Volumetric Instruments Meniscus adjustment Meniscus adjustment with ring mark with Schellbach stripe Read at the lowest point of the meniscus. Read at the point where the two arrows touch. Meniscus adjustment reflexion of liquid surface meniscus ring mark dark paper (p.e. black, blue) 2 2. Preparation for testing 2. Clear identification of the volumetric instrument to be tested Batch number, individual serial number, trademark, nominal volume and tolerances are directly printed ⇒ The test starts with a clear identification of the on every BLAUBRAND volumetric instruments. volumetric instrument in the test record. 2.1 Copy Test Record (see page 13) 2.2 Serial number/Identification number ⇒ Enter into Test Record All BLAUBRAND® volumetric instruments always carry a batch number, e.g., 13.04, or an individual serial number in the case of individual certificates, e.g., 13.040371 (year of production 2013, Batch No.
    [Show full text]
  • List of Equipment
    Mfg & Exporters: All types of Turnkey Projects, , Beverages, Mineral Water plant & OEM Spares List Of Equipment SR.NO Equipment Qty 1. Autoclave 1 Vertical Complete Heavy gauze with pressure gauze, Safety Valve, Stream Release Valve Size 30 X 30 cm 2. Digital Hot Air Ageing oven 1 Size 12” x 12” x 12” made of MS powder coated. Make- HB 3. Digital pH System : 1 Make- HB 4. Digital Incubator Bacteriological 2 12” X 12” X 12” made of MS powder coated. Make- HB 5. Water bath double walled 1 inner chamber of SS outer M.S powder coated with 6 hole with thermostatic control Make- HB 6. INNOCULATION CHAMBER, M.S POWDER COATED WITH 1 UV & 1 FLOROCENT LIGHT INBUILT 1 Make- HB 7. Automatic Hot Plate with 8 inch dia with Thermostat 1 Make-HB 8. Digital Spectrophotometer 1 Make- HB 9. Digital Turbidity meter 1 Make- HB 10. Digital Colony Counter 1 Make- HB 11. S.S. Filter holder 47 mm 1 (complete S.S) 12. Microscope student 1 Make-Labron 13. Magnetic Stirrer with Hot Plate with 1 lit capacity Top made of SS with Teflon Bed 1 Make- HB 14. Centrifuge ( 4 holders) 1 Make- HB 15. Single pan Balance ( pocket type) max: 0-500 gm, L.C: 0.1 gm 1 16. High pressure vacuum Pump 1 17. BOD Incubators inner complete S.S outer MS powder coated.( heavy) 2 Make – HB 18. Heating Mental 1 lit capacity 1 Make- HB 19. S.S distillation Unit 1 Address: 140, Tribhuvan Estate opp Road No 11 Kathwada GIDC Contact: +91 9726943972 Email: [email protected] Mfg & Exporters: All types of Turnkey Projects, , Beverages, Mineral Water plant & OEM Spares List Of Chemicals Sr.
    [Show full text]
  • J-Sil Price List
    An ISO 9001 : 2008 Certified Company TM J-SIL LABORATORY GLASSWARE Made from Borosilicate 3.3 Glass PRICE LIST 1st April, 2015 Manufactured by : J-SIL SCIENTIFIC INDUSTRIES MFRS. OF : SCIENTIFIC & LABORATORY GLASS APPARATUS 48-B, INDUSTR IAL ESTATE, NUNHAI, AGRA-282006 (INDIA) Phone : 2281967, 2281887 l Fax : 0562-2280186 E-mail : jsil @sancharnet.in, [email protected] Web : www.j-sil.com LABORATORY GLASS APPARATUS J-SIL 51. Chromatography Graduated, Screw Vials 9 mm wide Opening Type Cap Pkt Price/ Pkt A Clear Glass 2ml 100 PC 650.00 B Amber Glass 2ml 100 PC 700.00 56. Screw Cap with Septa for 9 mm Screw Vials (Closure) Cap Septa Pkt Price/ Pkt A Blue Non Slit 100 PC 750.00 B Blue Pre-Slit 100 PC 775.00 61. Clear Glass Screw Vials 9mm with Screw Blue Cap & PTFE-Silicon Septa (Combo) Cap Septa Pkt Price/ Pkt A 2 ml Non Slit 100 PC 1350.00 B 2 ml Pre-Slit 100 PC 1400.00 66. Amber Clear Glass Screw Vials 9mm with Screw Blue Cap & PTFE-Silicon Septa (Combo) Cap Septa Pkt Price/ Pkt A 2 ml Non Slit 100 PC 1400.00 B 2 ml Pre-Slit 100 PC 1450.00 LABORATORY GLASS APPARATUS J-SIL 71. Nylon Syringe Filter (Non Sterile) Packed in Transparent Plastic Jar DIA MICRON Pkt Price/ Pkt A 13 mm 0.22µm 100 1800.00 B 13 mm 0.45µm 100 1800.00 C 25 mm 0.22µm 100 1850.00 D 25 mm 0.45µm 100 1850.00 76. PVDF Syringe Filter (Non Sterile) Packed in Transparent Plastic Jar DIA MICRON Pkt Price/ Pkt A 13 mm 0.22µm 100 2800.00 B 13 mm 0.45µm 100 2800.00 C 25 mm 0.22µm 100 2850.00 D 25 mm 0.45µm 100 2850.00 81.
    [Show full text]
  • Accufine Life Sciences
    +91-8048861063 Accufine Life Sciences https://www.indiamart.com/rp-biotech/ Started in the year 2016, we “Accufine Life Sciences” has successfully emerged as a major Manufacturer, Trader, Exporter and Importer of high-quality Micropipette Tips, Microscope Slide, Swab Stick and many more. About Us Started in the year 2016, we “Accufine Life Sciences” has successfully emerged as a major Manufacturer, Trader, Exporter and Importer of high-quality Micropipette Tips, Microscope Slide, Swab Stick, Urine Containers, Lab Pipette, Vacutainer Tubes, Lab Disposables and many more. The basic material used in the manufacturing of these products are sourced from authentic vendors in the market and are rigorously tested on different parameters by our quality analysts assuring their quality. Also, our range has acknowledged due to the features like strong construction, long service life, and remarkably long life. We are supported by an ultra-modern infrastructure. Further, our strong customer reach approach is backed with the technological advancement that we have implemented at our infrastructure. Further, we assure that our lab glassware and plastic ware are suitably delivered to meet time schedules. We offer all our products in different sizes to meet the diversified demands of the clients. Under the headship of our mentor "Mr. Rakesh Singla", our organization is moving ahead in this cutting-edge competition. He has knowledge that helped us design immaculate lab glassware and plastic ware for the clients. For more information, please visit https://www.indiamart.com/rp-biotech/profile.html
    [Show full text]
  • Physicians Office Labs
    ® Select products for Physicians Office Labs www.globescientific.com ® Select products for Physicians Office Labs Table of Contents E.S.R. Systems .....................................2-5 Sedi-Rate™ Starter Kit Blood Collection ................................... 6-7 Capillary Tubes .....................................8-9 Specimen Containers .......................10-13 Thermometer Strips ...............................11 Patient Identification Labels ...................11 Specimen Transport Tubes .................. 13 Specimen Transport Bags .................... 14 Urinalysis Products ............................15-17 Centrifuge Tubes ..............................18-20 3467 — Sedi-Rate Starter Kit Test Tubes .........................................21-22 Sedi-Rate™ Starter Kit includes everything needed to perform safe and Caps for Test Tubes ....................6, 23-24 accurate Westergren ESR determinations. Kit includes: Racks for Test Tubes ...................... 25-27 100 Sedi-Rate pipettes and vials 100 Piercing funnels Microscope Slides/Accessories ....28-31 100 ESR transfer pipettes Pipettors ...........................................32-33 1 10-place rack with pipette support clamps 1 Leveling platform Pipette Tips ............................................. 34 Item # Description Unit 3467 Sedi-Rate Starter Kit 1 Kit Transfer Pipets ....................................... 35 2 Customer Service and Technical Support: 1 (201) 599-1400 Sedi-Rate™ E.S.R. System The use of Sedi-Rate™ eliminates splashing, spraying and aerosol
    [Show full text]
  • Rheologic Studies on Synovial Fluid
    RHEOLOGIC STUDIES ON SYNOVIAL FLUID Milton G. Levine, David H. Kling J Clin Invest. 1956;35(12):1419-1427. https://doi.org/10.1172/JCI103399. Research Article Find the latest version: https://jci.me/103399/pdf RHEOLOGIC STUDIES ON SYNOVIAL FLUID By MILTON G. LEVINE AND DAVID H. KLING (From the Boyar-Kling Arthritis Clinic, Los Angeles, Calif.) (Submitted for publication March 28, 1956; accepted September 5, 1956) The relative viscosity of normal and pathologi- for most joint fluids; a 22 gauge is preferable for fluids cal synovial fluids fluctuates over a wide range, of low viscosity, and an 18 gauge for highly viscid fluids. and has been studied for a considerable period. The attachment of the needle to the pipette is made water-tight by a rubber sleeve, or by a cement seal, or The older literature is covered by Kling (1), and the delivery end of the pipette may be ground so that it the more recent by Ropes and Bauer (2) and by fits snugly into the hilt of the needle. Sundblad (3). Early investigators established, The viscometer is filled by suction above the zero by precipitation reactions with acetic acid, that mark, and the upper opening of the pipette is kept closed the high viscosity was due to a "mucin," assumed with a finger. The pipette is placed in a clamp holder and immersed in a constant temperature bath until the to be a combination of protein and carbohydrate. hilt of the hypodermic needle meets the water level. The In 1939, Meyer, Smyth, and Dawson (4) identi- measurement is started by releasing the finger, and the fied the polysaccharide as hyaluronic acid, and rate of flow is timed between two selected points on the found it to be responsible for the high viscosity.
    [Show full text]
  • CHM250 Calibration and Measurement Lab Green Profile
    CHM250 Calibration and Measurement Lab Green Profile Balance Calibration Introduction: Balances that are properly operated, calibrated and maintained are crucial for laboratory operations. The accuracy of all quantitative results is based on the ability of the balances to produce accurate and reproducible measurements within the strictest of quality control limits. For balances to work properly, they must be placed in a suitable environment. The work area should be relatively free from drafts and vibrations. Work surfaces must be level and rigid. The ideal balance location is free of significant temperature fluctuations. The balance must be cleaned and leveled properly before use. Any unclean balance surface could be a source of contamination. Balances must be clean, zeroed, leveled and free of all debris. Balance lids and doors should be closed and hoods replaced after use. Avoid dropping anything directly onto the balance pan as the shock may affect or damage the balance. The weight of a tarred vessel affects the accuracy and precision of a balance. The combined weights of the tarred vessel and material must be less than the maximum operating range of the balance. For example, if the analyst is weighing into a tarred 50 g beaker, the balance will behave as if it were loaded to greater than 50 g. Good laboratory procedure must be employed when weighing small amounts into large tarred amounts. Specific analytical methods may address this issue of choosing the appropriate balance and weighing techniques. A balance should not be used outside of its operating range or its limited usage range. When weighing, place the object directly in the center of the pan.
    [Show full text]
  • (1) Identification of the Common Laboratory Glassware, Pipettes and Equipment
    Biochemical Calculations BCH312 [Practical] BCH312 [Practical] ¨ Course Outline Title of the Experiments Identification of the common laboratory glassware, pipettes and 1 Equipment 2 Preparation of Solutions 3 Dilution of Solutions 4 Preparation of Different Buffer Solutions 5 Preparation of Buffer Solutions by Different Laboratory Ways 6 Titration of a weak acid with strong base 7 Titration curve of amino acids 8 Beer's- Lambert Law and Standard Curves BCH312 [Practical] ¨ Mark Distribution Tasks Marks Performance 2 Marks Report 4 Marks Quiz 5 Marks Final 14 Marks Total 25 Marks Final Exam Date 27 / 3 / 2019 BCH312 [Practical] ¨ How to write a Lab report? The laboratory reports should contain the following sections: 1) Cover page: Title, course number, student name. 2) Brief Introduction [ Theoretical background information ] 3) Objectives 4) Materials and Methods [ As in the lab sheet ] 5) Results [ Tables and Calculations ] 6) Discussion • In this section you are required to describe of what happened in the experiment [Principle] , explain your results and make conclusions by comparing your results to expected values • Even if you obtained unexpected results, the discussion section is the section to justify or explain the reasons why you have obtained such results. 7) Questions. 8) References. BCH312 [Practical] 5 (1) Identification of the common laboratory Glassware : a. Conical flasks and beakers. b. Graduated cylinders [measuring cylinder ]. c. Vo lu metric flasks. d. Burettes. e. Pipettes. 6 Glassware Conical flasks and beakers Graduated cylinders Volumetric flasks Burettes They are used for mixing, Used to measure the Used for preparing standard A burette delivers transporting, dissolving and volume of a liquid.
    [Show full text]
  • Volumetric Measurement in the Laboratory
    Volumetric Measurement in the Laboratory Learning the basics – how to work with volumetric instruments. BRAND. For lab. For life. ® Introduction Volumetric measurement plays a central role in the laboratory. The user has to determine the degree of accuracy required for each measurement. Based on this, he can choose the appropriate volu- metric instrument. Reliable measurements require the use of precision instruments and their proper handling. To provide a better understanding of volumet- ric instruments and their operation, this booklet explains the most important terms for their classification and handling, and illustrates them by using BRAND laboratory equipment as examples. The brochure 'Information on Volumetric Measurement' is designed to give the reader a quick overview of volumetric instruments. It is not intended to replace the safety instructions or operating manuals of the liquid handling instruments described. Please do not hesitate to contact us if you have any further questions. BRAND GMBH + CO KG P.O. Box 1155 97861 Wertheim Germany T +49 9342 808 0 F +49 9342 808 98000 [email protected] www.brand.de © BRAND GMBH + CO KG · All rights reserved Contents Volumetric Instruments – an Overview ................................. 5 Manufacture of Glass Volumetric Instruments ................... 6 From raw material to finished precision instrument 6 Identification of volumetric instruments 8 Accuracy classification of volumetric instruments 9 Working with Volumetric Instruments ................................. 10 Meniscus of a liquid 10 Delivery and waiting times 11 Pipettes, general 12 Handling of pipettes 13 Handling of volumetric flasks 15 Handling of graduated and mixing cylinders 15 Handling of burettes 16 Handling of density bottles 17 Working with pipetting aids 18 Working with Liquid Handling Instruments .......................
    [Show full text]