DOCSLIB.ORG

List of Equipment

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
List of Equipment Mfg & Exporters: All types of Turnkey Projects, , Beverages, Mineral Water plant & OEM Spares List Of Equipment SR.NO Equipment Qty 1. Autoclave 1 Vertical Complete Heavy gauze with pressure gauze, Safety Valve, Stream Release Valve Size 30 X 30 cm 2. Digital Hot Air Ageing oven 1 Size 12” x 12” x 12” made of MS powder coated. Make- HB 3. Digital pH System : 1 Make- HB 4. Digital Incubator Bacteriological 2 12” X 12” X 12” made of MS powder coated. Make- HB 5. Water bath double walled 1 inner chamber of SS outer M.S powder coated with 6 hole with thermostatic control Make- HB 6. INNOCULATION CHAMBER, M.S POWDER COATED WITH 1 UV & 1 FLOROCENT LIGHT INBUILT 1 Make- HB 7. Automatic Hot Plate with 8 inch dia with Thermostat 1 Make-HB 8. Digital Spectrophotometer 1 Make- HB 9. Digital Turbidity meter 1 Make- HB 10. Digital Colony Counter 1 Make- HB 11. S.S. Filter holder 47 mm 1 (complete S.S) 12. Microscope student 1 Make-Labron 13. Magnetic Stirrer with Hot Plate with 1 lit capacity Top made of SS with Teflon Bed 1 Make- HB 14. Centrifuge ( 4 holders) 1 Make- HB 15. Single pan Balance ( pocket type) max: 0-500 gm, L.C: 0.1 gm 1 16. High pressure vacuum Pump 1 17. BOD Incubators inner complete S.S outer MS powder coated.( heavy) 2 Make – HB 18. Heating Mental 1 lit capacity 1 Make- HB 19. S.S distillation Unit 1 Address: 140, Tribhuvan Estate opp Road No 11 Kathwada GIDC Contact: +91 9726943972 Email: [email protected] Mfg & Exporters: All types of Turnkey Projects, , Beverages, Mineral Water plant & OEM Spares List Of Chemicals Sr. Name of Chemical Company Name Packing 1 Ammonium Carbonate proton 100 gm 2 Ammonium Acetate proton 100 gm 3 Ammonia solution proton 500 ml 4 Acetic Acid (Glacial) proton 500 ml 5 Ammonium Dichromate proton 100 gm 6 Activated Charcoal proton 500 gm 7 Ammonium Thiocynate proton 100 gm 8 Ammonium meta vanadate Proton 5gm 9 Aluminium oxide(Al2O3) proton 100gm 10 Aluminium Potassium Sulphate proton 100 gm 11 Di-Ammonium Hydrogen O phosphate proton 100gm 12 L(+) Ascorbic Acid proton 25 gm 13 Antimony metal powder proton 25 gm 14 Boric Acid proton 100 gm 15 Barium Chloride proton 100 gm 16 Barium Hydroxide proton 100 gm 17 Bromocresol Green solution proton 100 ml 18 Cobaltous Chloride proton 25 gm 19 Chloroform proton 500 ml 20 Calcium Carbonate proton 100 gm 21 Calcium Hydroxide proton 100 gm 22 Copper(Cupric) Sulphate proton 100 gm 23 Chromo tropic Acid (AR) proton 5 gm 24 Copper metal powder(Dust) proton 25 gm 25 Citric Acid proton 100 gm 26 Di-lso propyle ether proton 500 ml 27 Di(2-Ethy hexyl) sulphosuccinate proton 25 gm 28 Di ethylene glycol, mono butyl ether proton 500ml 29 E.D.T.A.( ethelene diamine tetra acitic acid, di sodium salt) proton 100 gm 30 Ethanol (Ethyl Alcohol) - 250 ml 31 Ethylene glycol(Ethandiol) proton 500 ml 32 Ethyl Acetate proton 500 ml 33 Erichrom Cynine-R proton 5 gm 34 Ferrous Ammonium Sulphate proton 100 gm 35 Ferric Chloride proton 100 gm 36 Ferric Citrate proton 100gm 37 Gelatin Powder proton 100gm 38 Glycerin(Glycerol) proton 500 ml 39 Hydrochloric Acid proton 500 ml Address: 140, Tribhuvan Estate opp Road No 11 Kathwada GIDC Contact: +91 9726943972 Email: [email protected] Mfg & Exporters: All types of Turnkey Projects, , Beverages, Mineral Water plant & OEM Spares 40 Hexamethylene tetra amine(Hexamine) proton 100 gm 41 Hydrazine Sulphate proton 100 gm 42 Hydroxylamine Hydrochloride proton 100 gm 43 Hydrogen peroxide 30% proton 250 ml 44 Methanol proton 500 ml 45 Methyl Orange proton 100 ml 46 Methyl Red proton 100 ml 47 Methylene Blue proton 100 ml 48 Mercuric chloride proton 2 gm 49 Manganese Sulphate proton 100 gm 50 Murexide(ammonium purpurate) proton 5 gm 51 Neocuproin(AR) proton 1 gm 52 Nitric Acid proton 500 ml 53 NED Di Hydrochloride proton 5 gm 54 N-N Dimethyl p-phenele di amine oxalate proton 2 gm 55 O-phosphoric acid( GR-1.75 D) proton 250 ml 56 2-Propanol (IPA) proton 500 ml 57 PH Buffer Tablet - 4 PH proton 10 tab 58 PH Buffer Tablet - 7 PH proton 10 tab 59 Patton & Readers reagent proton 5gm 60 Potassium iodide proton 25 gm 61 Potassium Permanganate proton 100 gm 62 Potassium Meta period ate proton 25 gm 63 Potassium Nitrate proton 100gm 64 Potassium Chloride proton 100gm 65 Potassium Chromate proton 100gm 66 Potassium chloroplatinate sol. proton 100 ml 67 Potassium Di chromate proton 100gm 68 Potassium Hydrogen Sulphate proton 100gm 69 Phenolphthalein solution proton 100 ml 70 1,10 Phenonthroline(AR) proton 5gm 71 Potassium Hydroxide proton 100gm 72 Potassium-di-hydrogen O phosphate proton 100gm 73 Di-Potassium Hydrogen Ortho Phosphate proton 100 gm 74 Potassium Ferry Cyanide proton 100gm 75 Potassium cyanide - 10 gm 76 Sodium chloride proton 100gm 77 Sodium Thiosulphate proton 100gm 78 Sodium Acetate proton 100gm 79 Sodium arsenite Proton 5 gm 80 Sodium ascorbate proton 25 gm 81 Sodium Sulphite proton 100gm 82 Sodium sulphate proton 100gm 83 Sodium Hydrogen Carbonate (sod.bi carbonate) proton 100gm 84 Sodium Carbonate proton 100gm 85 Sodium Oxalate proton 100gm 86 Silica Gel (Blue) proton 100gm Address: 140, Tribhuvan Estate opp Road No 11 Kathwada GIDC Contact: +91 9726943972 Email: [email protected] Mfg & Exporters: All types of Turnkey Projects, , Beverages, Mineral Water plant & OEM Spares 87 Silver Nitrate proton 5 gm 88 Sodium Nitrite proton 100gm 89 Sodium Nitrate proton 500gm 90 Eriochrome Black-T proton 25 gm 91 Sodium hydroxide proton 500gm 92 Sodium hypochlorite solution proton 100 ml 93 Sulphanilamide proton 25gm 94 Sulphuric Acid (98%) proton 500ml 95 Sulphur dioxide(sulphurous acid) proton 100 ml 96 Starch Powder(Soluble) proton 100gm 97 (Tri) Sodium Citrate proton 100gm 98 Tri Ethanolamine proton 500ml 99 Urea proton 100gm 100 Zinc SULPHATE proton 100 gm MEDIA FOR MICROBIOLOGYCAL TEST 1 Differential rain forced TITAN 100 GM. clostridia broth 2 Chloramphenicol Yeast TITAN 100 GM. GlucoseAgar 3 Plate Count Agar TITAN 100 GM. 4 Asparagines Prolein broth TITAN 100 GM. 5 Kovac reagent TITAN 100 GM 6 Oxidase reagent TITAN 100 GM 7 Tryptone soya agar TITAN 100 GM 8 Tryptone Broth TITAN 100 GM 9 CHROMOGENIC COLIFORM TITAN 100 GM AGAR 10 Milk agar 100gm TITAN 100 GM 11 Macconkey agar TITAN 100 GM 12 Macconkey broth TITAN 100 GM Address: 140, Tribhuvan Estate opp Road No 11 Kathwada GIDC Contact: +91 9726943972 Email: [email protected] Mfg & Exporters: All types of Turnkey Projects, , Beverages, Mineral Water plant & OEM Spares LIST OF GLASS WARES SR. No Item Name Capacity(ml) Quantity(No.) 1 Nessler cylinder 50 ml 6 2 Standard Volumetric Flask glass 10 ml 2 3 Standard Volumetric Flask glass 50 ml 2 4 Standard Volumetric Flask glass 100 ml 2 5 Standard Volumetric Flask glass 250 ml 2 6 Standard Volumetric Flask glass 500 ml 2 7 Standard Volumetric Flask glass 1000 ml 1 8 Graduated Pipette glass 1 ml 2 9 Graduated Pipette glass 2 ml 2 10 Graduated Pipette glass 5 ml 1 11 Graduated Pipette glass 10 ml 1 12 Volumetric pipette glass 1 ml 1 13 Volumetric pipette glass 10 ml 1 14 Conical Flask glass 250 ml 6 15 Conical Flask glass 500 ml 2 16 Conical flask glass 100ml 6 17 Conical flask poly lab 100ml 2 18 Beaker glass 50 ml 6 19 Beaker glass 100 ml 4 20 Beaker glass 250 ml 4 21 Beaker glass 1000 1 22 Beaker (poly lab) 250 ml 2 23 Petri dish 4’’ - 20 24 Iodine Flask 250 ml 1 25 Filtration Flask (rasayan) glass 1000 ml 1 26 Wide Mouth Bottle Indian glass 1000 ml 1 27 Wash Bottle (poly lab) 500 ml 2 28 Burette poly lab 50ml 50 ml 2 29 Burette Stand (M.S Base, rod & boss 1 set ate, clamp) 30 Burette Stand (poly lab Base, rod & 3’’ 1 set single burette clamp) 31 Retort ring 3’’ - 1 32 Funnel glass - 2 33 Pipette Stand horizontal (poly lab) - 1 34 Measuring Cylinder glass 50 ml 1 35 Measuring Cylinder glass 100 ml 1 36 Measuring Cylinder glass 250 ml 1 37 Measuring Cylinder poly lab 100 ml 1 38 Spatula s.s - 2 39 Dessicator 6’’ Indian - 1 40 Separating Funnel 250 ml 1 41 Separating Funnel 500 ml 1 Address: 140, Tribhuvan Estate opp Road No 11 Kathwada GIDC Contact: +91 9726943972 Email: [email protected] Mfg & Exporters: All types of Turnkey Projects, , Beverages, Mineral Water plant & OEM Spares 42 Screw Cap Bottle 100 ml 4 43 Activated Carbon Column - 1 44 Glass Slide box - 1 Box 45 Burner with cock - 2 46 Wire loop - 1 47 Pipette Bulb Small 1 48 Pipette Bulb Medium 1 49 Pipette Bulb Large 1 50 Cotton - 1 51 Tissue roll - 1 52 Reagent Bottle Indian GLASS 125 ml 12 53 Reagent bottle Indian GLASS 250ml 12 54 Reagent bottle 500ml 6 55 Dropping bottle 125 ml 5 56 Nessler tube stand poly lab - 1 57 Test tube stand - 1 58 Test tubes - 10 59 Amber Bottle (Brown Bottle) 250 ml 5 60 PH stripe box - 1 Box 61 Dropper - 2 62 Condenser 1 63 R.B flask 1ltr 1 ltr 1 64 Bend - 1 65 Glass Rod - 2 66 Evaporating Dish 4’’ - 2 67 Flask Tongue - 1 68 Cellulose nitrate filter paper 0.45 micron 1 pkt 69 Whatman filter paper - 1 pkt 70 Glass Beed pkt - 1 packet 71 Durham Tube pkt - 1 packet 72 Forcep with rounded tips - 1 73 Thermometer 0 to 110 C, (L.C.
Load more

Recommended publications
  • Laboratory Glassware N Edition No
    Laboratory Glassware n Edition No. 2 n Index Introduction 3 Ground joint glassware 13 Volumetric glassware 53 General laboratory glassware 65 Alphabetical index 76 Índice alfabético 77 Index Reference index 78 [email protected] Scharlau has been in the scientific glassware business for over 15 years Until now Scharlab S.L. had limited its sales to the Spanish market. However, now, coinciding with the inauguration of the new workshop next to our warehouse in Sentmenat, we are ready to export our scientific glassware to other countries. Standard and made to order Products for which there is regular demand are produced in larger Scharlau glassware quantities and then stocked for almost immediate supply. Other products are either manufactured directly from glass tubing or are constructed from a number of semi-finished products. Quality Even today, scientific glassblowing remains a highly skilled hand craft and the quality of glassware depends on the skill of each blower. Careful selection of the raw glass ensures that our final products are free from imperfections such as air lines, scratches and stones. You will be able to judge for yourself the workmanship of our glassware products. Safety All our glassware is annealed and made stress free to avoid breakage. Fax: +34 93 715 67 25 Scharlab The Lab Sourcing Group 3 www.scharlab.com Glassware Scharlau glassware is made from borosilicate glass that meets the specifications of the following standards: BS ISO 3585, DIN 12217 Type 3.3 Borosilicate glass ASTM E-438 Type 1 Class A Borosilicate glass US Pharmacopoeia Type 1 Borosilicate glass European Pharmacopoeia Type 1 Glass The typical chemical composition of our borosilicate glass is as follows: O Si 2 81% B2O3 13% Na2O 4% Al2O3 2% Glass is an inorganic substance that on cooling becomes rigid without crystallising and therefore it has no melting point as such.
    [Show full text]
  • Standard Operating Procedures
    Standard Operating Procedures 1 Standard Operating Procedures OVERVIEW In the following laboratory exercises you will be introduced to some of the glassware and tech- niques used by chemists to isolate components from natural or synthetic mixtures and to purify the individual compounds and characterize them by determining some of their physical proper- ties. While working collaboratively with your group members you will become acquainted with: a) Volumetric glassware b) Liquid-liquid extraction apparatus c) Distillation apparatus OBJECTIVES After finishing these sessions and reporting your results to your mentor, you should be able to: • Prepare solutions of exact concentrations • Separate liquid-liquid mixtures • Purify compounds by recrystallization • Separate mixtures by simple and fractional distillation 2 EXPERIMENT 1 Glassware Calibration, Primary and Secondary Standards, and Manual Titrations PART 1. Volumetric Glassware Calibration Volumetric glassware is used to either contain or deliver liquids at a specified temperature. Glassware manufacturers indicate this by inscribing on the volumetric ware the initials TC (to contain) or TD (to deliver) along with the calibration temperature, which is usually 20°C1. Volumetric glassware must be scrupulously clean before use. The presence of streaks or droplets is an indication of the presence of a grease film. To eliminate grease from glassware, scrub with detergent solution, rinse with tap water, and finally rinse with a small portion of distilled water. Volumetric flasks (TC) A volumetric flask has a large round bottom with only one graduation mark positioned on the long narrow neck. Graduation Mark Stopper The position of the mark facilitates the accurate and precise reading of the meniscus. If the flask is used to prepare a solution starting with a solid compound, add small amounts of sol- vent until the entire solid dissolves.
    [Show full text]
  • Environmental Protection Agency Pt. 63, App. A
    Environmental Protection Agency Pt. 63, App. A APPENDIX A TO PART 63—TEST METHODS posed as an alternative test method to meet an applicable requirement or in the absence METHOD 301—FIELD VALIDATION OF POLLUT- of a validated method. Additionally, the val- ANT MEASUREMENT METHODS FROM VARIOUS idation procedures of Method 301 are appro- WASTE MEDIA priate for demonstration of the suitability of alternative test methods under 40 CFR parts USING METHOD 301 59, 60, and 61. If, under 40 CFR part 63 or 60, 1.0 What is the purpose of Method 301? you choose to propose a validation method other than Method 301, you must submit and 2.0 What approval must I have to use Method obtain the Administrator’s approval for the 301? candidate validation method. 3.0 What does Method 301 include? 2.0 What approval must I have to use Method 301? 4.0 How do I perform Method 301? If you want to use a candidate test method REFERENCE MATERIALS to meet requirements in a subpart of 40 CFR part 59, 60, 61, 63, or 65, you must also request 5.0 What reference materials must I use? approval to use the candidate test method according to the procedures in Section 16 of SAMPLING PROCEDURES this method and the appropriate section of 6.0 What sampling procedures must I use? the part (§ 59.104, § 59.406, § 60.8(b), § 61.13(h)(1)(ii), § 63.7(f), or § 65.158(a)(2)(iii)). 7.0 How do I ensure sample stability? You must receive the Administrator’s writ- ten approval to use the candidate test meth- DETERMINATION OF BIAS AND PRECISION od before you use the candidate test method to meet the applicable federal requirements.
    [Show full text]
  • Q & a – Accuracy and Precision
    Food Analysis – FScN 4312W Laboratory: Assessment of Accuracy and Precision Key to Questions 1. Theoretically, how are standard deviation, coefficient of variation, mean, percent relative error, and 95% confidence interval affected by: (1) more replicates, and (2) a larger size of measurement? Was this evident in looking at the actual results obtained using the volumetric pipettes and the buret, with n = 3 vs n = 6, and with 1mL vs 10mL? Ans: (1) As the sample size increases (more replicates) - Calculated mean approaches the true mean - Standard deviation is inversely proportional to the square root of sample size, hence it decreases - CV decreases, as standard deviation approaches 0 for larger sample size - % Relative error decreases as calculated mean approaches true mean - 95% confidence interval narrows down (2) Larger size of measurement - Mean is close to true mean - Standard deviation might be larger due to larger size - CV decreases - % Relative error decreases, as calculated mean is close to true mean - 95% confidence interval narrows down Not all of the above assumptions were confirmed in this experiment according to the data observed. One reason could be that the sample size was very small (n = 3 and n = 6), to notice significant differences, another reason could be human error and variation from one person’s measuring technique to another. 2. Why are percent relative error and coefficient of variation used to compare the accuracy and precision, respectively, of the volumes from pipetting/dispensing 1 and 10mL with the volumetric pipettes and buret in parts 2 and 3, rather than simply the mean and standard deviation, respectively? Ans: Mean calculated from the readings gives the calculated mean, which may differ from the true mean.
    [Show full text]
  • Laboratory Equipment Used in Filtration
    KNOW YOUR LAB EQUIPMENTS Test tube A test tube, also known as a sample tube, is a common piece of laboratory glassware consisting of a finger-like length of glass or clear plastic tubing, open at the top and closed at the bottom. Beakers Beakers are used as containers. They are available in a variety of sizes. Although they often possess volume markings, these are only rough estimates of the liquid volume. The markings are not necessarily accurate. Erlenmeyer flask Erlenmeyer flasks are often used as reaction vessels, particularly in titrations. As with beakers, the volume markings should not be considered accurate. Volumetric flask Volumetric flasks are used to measure and store solutions with a high degree of accuracy. These flasks generally possess a marking near the top that indicates the level at which the volume of the liquid is equal to the volume written on the outside of the flask. These devices are often used when solutions containing dissolved solids of known concentration are needed. Graduated cylinder Graduated cylinders are used to transfer liquids with a moderate degree of accuracy. Pipette Pipettes are used for transferring liquids with a fixed volume and quantity of liquid must be known to a high degree of accuracy. Graduated pipette These Pipettes are calibrated in the factory to release the desired quantity of liquid. Disposable pipette Disposable transfer. These Pipettes are made of plastic and are useful for transferring liquids dropwise. Burette Burettes are devices used typically in analytical, quantitative chemistry applications for measuring liquid solution. Differing from a pipette since the sample quantity delivered is changeable, graduated Burettes are used heavily in titration experiments.
    [Show full text]
  • TOP-014, Technical Operating Procedure for Spectrophotometric
    CENTER FOR NUCLEAR WASTE Proc. T0P-014 REGULATORY ANALYSES Revision ° TECHNICAL OPERATING PROCEDURE Page I of 11 Title TECHNICAL OPERATING PROCEDURE FOR SPECTROPHOTOMETRIC DETERMINATION OF SILICA EFFECTIVITY AND APPROVAL Revision n of this procedure became effective on 03/04/91 This procedure consists of the pages and changes listed below. Page No. Change Date Effective ALL 03/04/91 Superseaes Procedure No. None Approvals Written By Technical Revie / CENTER FOR NUCLEAR WASTE Proc.TOP-014 REGULATORY ANALYSES Revision _ TECHNICAL OPERATING PROCEDURE Page 2 of 1il TOP-014 TECHNICAL OPERATING PROCEDURE FOR SPECTROPHOTOMETRIC DETERMINATION OF SILICA 1. PURPOSE The purpose of this procedure is to describe a general method for the spectrophotometric determination of silica (Si02) in aqueous solutions. This procedure will be used for aqueous solutions generated by geochemical experiments involving silicate minerals (e.g., zeolites and feldspars) but may also be used for analyses of water samples collected from laboratory experiments or in the field. This procedure implements the requirements of CQAM Section 3. 2. APPLICABLE DOCUMENT The following document forms a part of this procedure, as applicable: Operator's Manual for Milton Roy Spectronic 1201 Spectrophotometer (1988) 3. RESPONSIBILITY (1) The Geosciences Element Manager shall be responsible for the development and maintainance of this procedure. (2) The cognizant Principal Investigator shall be responsible for the implementation of this procedure. (3) Personnel performing tasks described in this procedure are responsible for complying with its requirements. 4. EQUIPMENT (1) Milton Roy Spectronic 1201 Spectrophotometer with microprocessor-controlled functions and features including a linear curve fit test mode or equivalent.
    [Show full text]
  • 10. Resource Requirement for Medical Laboratory Technology
    10. RESOURCE REQUIREMENT FOR MEDICAL LABORATORY TECHNOLOGY 10.1 PHYSICAL RESOURCES 10.1.1. SPACE REQUIREMENT The total space for lecture halls, laboratories may be worked out as per latest AICTE norms 10.1.2 LIST OF EQUIPMENT Note: All the glass wares to be of Borosil make The chemicals may be purchased of reputed make. Sr. Item Quantity No. LIST OF CHEMICALS FOR CHEMISTRY LABORATORY 1. Ferrous ammonium sulphate (Analytical reagent) 3 x 500 grams 2. Oxalic Acid (A.R) 2 x 500 grams 3. Potassium Permanganate (BDH) 3 x 500 grams 4. Sodium Hydroxide (BDH) 2 x 500 grams 5. Sulphuric Acid (AR) 5 litre 6. Hydrochloric Acid (AR) 5 litre 7. Sodium carbonate (A.R) 2 x 500 grams 8. Phenolphthalen (BDH/Merck) 10 grams 9. Methyl orange (SDH) 10 grams 10. Ethyl Alcohol 4 x 500 ml 11. Methyl Alcohol 500 ml 12. Nitric acid 5 litre 13. Glacial Acetic Acid (CP) 1 litre 14. Ammonium sulphate (BDH) 250 grams 15. Copper sulphate (BDH) 500 grams 16. Glucose (BDH) 500 grams 17. Sucrose (BDH) 500 grams 18. Acetone (BDH) 500 grams 19 Potassium Hydroxide (BDH) 2 x 500 grams 20. Iodine 1 x 500 grams 21. Calcium Chloride (BDH) 500 grams 93 Sr. Item Quantity No. 22 NaCl 500 gms 23. Ferric chloride (BDH) 500 grams 24. Starch pH 7.0 500 grams 25. Fructose 250 grams. 26. Gelatin 500 grams. 27. Benzaldehyde 500 ml 28. Ether 500 ml 29. Carbon Tetrachloride 500 ml 30. Ferrous Bicarbonate 500 grams 31. Sodium Bicarbonate 500 grams 32. Albumin 500 grams 33.
    [Show full text]
  • Practical Laboratory Skills for Molecular Biologists.Pdf 3.0 MB
    Practical laboratory skills for molecular biologists skills best practice training training best practice skills Practical laboratory skills for molecular biologists First Edition 2016 Co-authors Elena Sanchez Timothy Wilkes Contributors Nicholas Redshaw Acknowledgements With special thanks to Alison Woolford and Vicki Barwick for their help in the production of this guide. Production of this Guide was funded by the UK National Measurement System. First edition 2016 ISBN: 978-0-948926-28-0 This publication should be cited as: E Sanchez, T Wilkes, Practical laboratory skills for Copyright © 2016 LGC molecular biologists, LGC 2016. ISBN: 978-0-948926-28-0 Practical laboratory skills for molecular biologists OBJECTIVES OF THIS GUIDE 3 1 WORKING IN THE LABORATORY 4 1.1 Health and Safety issues 4 1.2 Laboratory environment 10 1.3 Equipment 14 1.4 Method selection 15 2 MEASURING VOLUME 16 2.1 Types of equipment available 16 2.2 Markings on equipment used for volumetric measurements 22 2.3 Selecting a suitable piece of equipment 24 2.4 Cleaning and maintenance of volumetric equipment 26 2.5 Checking the accuracy of volumetric equipment 27 2.6 Checklists for making measurements of volume 28 3 MEASURING MASS 33 3.1 Mass versus weight 33 3.2 Types of balance available 33 3.3 Selecting a suitable balance 34 4 QUANTIFICATION OF NUCLEIC ACID MATERIAL 41 4.1 Measurement of nucleic acid concentration using UV spectroscopy 41 4.2 Fluorescent based systems. 43 4.3 Gel electrophoresis 45 5 MEASURING PH 47 5.1 What is pH? 47 5.2 Equipment for measuring
    [Show full text]
  • BLAUBRAND® Volumetric Instruments and Density Bottles
    BLAUBRAND® Volumetric Instruments and Density Bottles Testing Instructions (SOP) March 2015 1. Introduction The standard DIN EN ISO 4787 describes both the design and the testing of the volumetric instruments of glass. The following Testing Instructions describe how to apply the ISO standard in practice. We recommend a testing every 1-3 years. The interval depends on the using of aggressive media and the cleaning procedure. These Instructions may also be used as a basis for the supervision of testing devices to DIN EN ISO 9001, DIN EN ISO 10012 and DIN EN ISO/IEC 17025. The test of the Density Bottles was effected on the basis of DIN EN ISO 4787. Meniscus adjustment with BLAUBRAND® Volumetric Instruments Meniscus adjustment Meniscus adjustment with ring mark with Schellbach stripe Read at the lowest point of the meniscus. Read at the point where the two arrows touch. Meniscus adjustment reflexion of liquid surface meniscus ring mark dark paper (p.e. black, blue) 2 2. Preparation for testing 2. Clear identification of the volumetric instrument to be tested Batch number, individual serial number, trademark, nominal volume and tolerances are directly printed ⇒ The test starts with a clear identification of the on every BLAUBRAND volumetric instruments. volumetric instrument in the test record. 2.1 Copy Test Record (see page 13) 2.2 Serial number/Identification number ⇒ Enter into Test Record All BLAUBRAND® volumetric instruments always carry a batch number, e.g., 13.04, or an individual serial number in the case of individual certificates, e.g., 13.040371 (year of production 2013, Batch No.
    [Show full text]
  • J-Sil Price List
    An ISO 9001 : 2008 Certified Company TM J-SIL LABORATORY GLASSWARE Made from Borosilicate 3.3 Glass PRICE LIST 1st April, 2015 Manufactured by : J-SIL SCIENTIFIC INDUSTRIES MFRS. OF : SCIENTIFIC & LABORATORY GLASS APPARATUS 48-B, INDUSTR IAL ESTATE, NUNHAI, AGRA-282006 (INDIA) Phone : 2281967, 2281887 l Fax : 0562-2280186 E-mail : jsil @sancharnet.in, [email protected] Web : www.j-sil.com LABORATORY GLASS APPARATUS J-SIL 51. Chromatography Graduated, Screw Vials 9 mm wide Opening Type Cap Pkt Price/ Pkt A Clear Glass 2ml 100 PC 650.00 B Amber Glass 2ml 100 PC 700.00 56. Screw Cap with Septa for 9 mm Screw Vials (Closure) Cap Septa Pkt Price/ Pkt A Blue Non Slit 100 PC 750.00 B Blue Pre-Slit 100 PC 775.00 61. Clear Glass Screw Vials 9mm with Screw Blue Cap & PTFE-Silicon Septa (Combo) Cap Septa Pkt Price/ Pkt A 2 ml Non Slit 100 PC 1350.00 B 2 ml Pre-Slit 100 PC 1400.00 66. Amber Clear Glass Screw Vials 9mm with Screw Blue Cap & PTFE-Silicon Septa (Combo) Cap Septa Pkt Price/ Pkt A 2 ml Non Slit 100 PC 1400.00 B 2 ml Pre-Slit 100 PC 1450.00 LABORATORY GLASS APPARATUS J-SIL 71. Nylon Syringe Filter (Non Sterile) Packed in Transparent Plastic Jar DIA MICRON Pkt Price/ Pkt A 13 mm 0.22µm 100 1800.00 B 13 mm 0.45µm 100 1800.00 C 25 mm 0.22µm 100 1850.00 D 25 mm 0.45µm 100 1850.00 76. PVDF Syringe Filter (Non Sterile) Packed in Transparent Plastic Jar DIA MICRON Pkt Price/ Pkt A 13 mm 0.22µm 100 2800.00 B 13 mm 0.45µm 100 2800.00 C 25 mm 0.22µm 100 2850.00 D 25 mm 0.45µm 100 2850.00 81.
    [Show full text]
  • Accufine Life Sciences
    +91-8048861063 Accufine Life Sciences https://www.indiamart.com/rp-biotech/ Started in the year 2016, we “Accufine Life Sciences” has successfully emerged as a major Manufacturer, Trader, Exporter and Importer of high-quality Micropipette Tips, Microscope Slide, Swab Stick and many more. About Us Started in the year 2016, we “Accufine Life Sciences” has successfully emerged as a major Manufacturer, Trader, Exporter and Importer of high-quality Micropipette Tips, Microscope Slide, Swab Stick, Urine Containers, Lab Pipette, Vacutainer Tubes, Lab Disposables and many more. The basic material used in the manufacturing of these products are sourced from authentic vendors in the market and are rigorously tested on different parameters by our quality analysts assuring their quality. Also, our range has acknowledged due to the features like strong construction, long service life, and remarkably long life. We are supported by an ultra-modern infrastructure. Further, our strong customer reach approach is backed with the technological advancement that we have implemented at our infrastructure. Further, we assure that our lab glassware and plastic ware are suitably delivered to meet time schedules. We offer all our products in different sizes to meet the diversified demands of the clients. Under the headship of our mentor "Mr. Rakesh Singla", our organization is moving ahead in this cutting-edge competition. He has knowledge that helped us design immaculate lab glassware and plastic ware for the clients. For more information, please visit https://www.indiamart.com/rp-biotech/profile.html
    [Show full text]
  • Physicians Office Labs
    ® Select products for Physicians Office Labs www.globescientific.com ® Select products for Physicians Office Labs Table of Contents E.S.R. Systems .....................................2-5 Sedi-Rate™ Starter Kit Blood Collection ................................... 6-7 Capillary Tubes .....................................8-9 Specimen Containers .......................10-13 Thermometer Strips ...............................11 Patient Identification Labels ...................11 Specimen Transport Tubes .................. 13 Specimen Transport Bags .................... 14 Urinalysis Products ............................15-17 Centrifuge Tubes ..............................18-20 3467 — Sedi-Rate Starter Kit Test Tubes .........................................21-22 Sedi-Rate™ Starter Kit includes everything needed to perform safe and Caps for Test Tubes ....................6, 23-24 accurate Westergren ESR determinations. Kit includes: Racks for Test Tubes ...................... 25-27 100 Sedi-Rate pipettes and vials 100 Piercing funnels Microscope Slides/Accessories ....28-31 100 ESR transfer pipettes Pipettors ...........................................32-33 1 10-place rack with pipette support clamps 1 Leveling platform Pipette Tips ............................................. 34 Item # Description Unit 3467 Sedi-Rate Starter Kit 1 Kit Transfer Pipets ....................................... 35 2 Customer Service and Technical Support: 1 (201) 599-1400 Sedi-Rate™ E.S.R. System The use of Sedi-Rate™ eliminates splashing, spraying and aerosol
    [Show full text]