Rekam Jejak Karya UNPAR Bagi Bangsa

Rekam Jejak Karya UNPAR bagi Bangsa

Laporan Penelitian dan Pengabdian kepada Masyarakat 2019

Lembaga Penelitian dan Pengabdian kepada Masyarakat Universitas Katolik Parahyangan 2020

PENELITIAN DAN PENGABDIAN KEPADA MASYARAKAT UNIVERSITAS KATOLIK PARAHYANGAN 2019

“Rekam Jejak Karya UNPAR bagi Bangsa”

TIM PENYUSUN Henky Muljana Ezer Lumika Maria Fransiska Hanna Rita Suminar Arnold Rurry Patty Anandasari Lajar Hanna Thresya Lubis Yohannes Timbul Widodo

DESAIN DAN PENATA ISI Sebastianus dan Tim LPPM

INFORMASI DAN KONTAK

Lembaga Penelitian dan Pengabdian kepada Masyarakat Universitas Katolik Parahyangan Gedung Rektorat, Lantai 4, Jl. Ciumbuleuit No. 94, Bandung

(022) 2032655, 2042004 Lppm Unpar

+62 822 5806 1797 @lppmunpar

[email protected] lppm.unpar.ac.id

Sistem Informasi: silppm.unpar.ac.id

PENINGKATAN BUDAYA MUTU DAN STANDAR KERJA

Setiap unit kerja di lingkungan UNPAR dituntut untuk mencapai kinerja yang terukur pada setiap periode tertentu, dan itu harus ditunjukkan serta dibuktikan dengan cara yang tepat, diantaranya berupa penerbitan. Penerbitan buku ini, dengan demikian, tidak semata-mata ditujukan untuk sekadar pelaporan dan dokumentasi atau untuk selanjutnya akreditasi atau sertifikasi. Lebih awal dan fundamental adalah dimana setiap unit kerja menyelami dan mempraktikkan budaya mutu. Inilah esensi dan primasi dari Sistem Penjaminan Mutu Internal (SPMI), sedangkan akreditasi dan/atau sertifikasi adalah sekunder dalam skema Sistem Penjaminan Mutu Eksternal (SPME). Dengan kata lain, UNPAR harus bekerja dengan standar, prosedur, target atau capaian yang jelas dan terukur. Harapan lebih jauh lagi adalah impactful yang artinya capaian berupa output dan outcome tersebut dirasakan manfaatnya oleh berbagai pihak. Tahun lalu, 2019, LPPM menerbitkan “Researcher Directory” yang merupakan ekspresi pengakuan dan sekaligus penghargaan kepada para dosen UNPAR yang melakukan penelitian dan publikasi sebagai bagian dari pelaksanaan tridarma. Belum semua dosen masuk dalam “directory” tersebut. Hanya mereka yang dinilai pantas yang dimasukkan, misalnya karena hibah penelitian yang diperoleh, jumlah penelitian dan publikasi yang dihasilkan, atau sitasi karya mereka dalam berbagai penerbitan yang diakui atau bereputasi. Penerbitan Laporan LPPM tahun ini kembali akan mendokumentasikan para dosen peneliti dan penulis yang dinilai telah menjalankan ketigadarmanya secara bertanggungjawab dan telah pula berkontribusi bagi kinerja UNPAR dalam penelitian dan pengabdian kepada masyarakat.

Penerbitan ini juga bersifat indikatif atas peningkatan status penelitian UNPAR dari klaster Utama menjadi klaster Mandiri. Menristek dan Kepala LLDIKTI IV mengapresiasi capaian tersebut pada November 2019 lalu. Dan, sekali lagi, hal itu lebih merupakan sebuah pengakuan atas peningkatan kinerja penelitian yang didasarkan pada budaya mutu dan standar kerja. Selamat dan terimakasih kepada para dosen yang terus berdarma secara seimbang dan progresif. Selamat dan terimakasih kepada LPPM yang terus berupaya secara kreatif untuk mamfasilitasi para dosen dalam melaksanakan tridarmanya.

Bandung, Januari 2020

Mangadar Situmorang, Ph.D. Rektor

CATATAN DAN BENTUK PENGHARGAAN SEBUAH KARYA

Seluruh dosen dan pimpinan unit di lingkungan UNPAR telah berkarya besar dalam pencapaian di bidang Penelitian dan Pengabdian kepada Masyarakat pada tahun 2019 ini. LPPM telah memfasilitasi dengan berbagai upaya untuk mendukung pencapaian tersebut. Penghargaan dan ucapan terima kasih tentu layak diberikan kepada setiap karya dan upaya yang telah dilakukan tersebut. Buku ini menjadi catatan dan bentuk penghargaan, bahwa pencapaian yang diperoleh merupakan karya yang perlu didokumentasikan dan diapresiasi. Penunjuk di bentang waktu sejarah bahwa insan UNPAR sebagai individu serta sebagai lembaga telah menorehkan karya. Buku dokumentasi ini tidak hanya sekedar berperan untuk mencatat hal-hal baik yang telah dicapai. Namun, buku ini menjadi pembuktian kepada khalayak yang lebih luas tentang siapa dan bagaimana UNPAR. Masih banyak hal yang harus dicapai. Masih terbentang tantangan di depan yang harus diupayakan. Upaya dan kerja bersama diharapkan memampukan setiap upaya untuk mencapai kebaikan yang lebih besar. Di tengah arus perubahan besar yang terjadi di lingkungan eksternal, maupun di lingkungan internal UNPAR, maka kesediaan setiap individu di lingkungan UNPAR untuk berubah dan bekerja sama merupakan bekal untuk mencapai capaian lain yang lebih besar. Ada harapan dan keyakinan bahwa UNPAR akan terus berkembang dan mencapai kejayaan karena didukung oleh individu dan karya yang makin relevan di masanya.

Apresiasi untuk semua upaya dan capaian. Penghargaan untuk setiap dukungan dan bantuan yang diberikan. Harapan untuk menjadi lebih baik dan relevan.

Bandung, Januari 2020

Tri Basuki Joewono, Ph.D. Wakil Rektor Bidang Akademik

6 REKAM JEJAK KARYA UNPAR BAGI BANGSA

Bertepatan dengan Dies UNPAR ke 65 ini, maka Lembaga Penelitian dan Pengabdian (LPPM) UNPAR kembali menyusun Buku Penelitian dan Pengabdian kepada Masyarakat (P2M) tahun 2019. Buku P2M 2019 dengan judul Rekam Jejak Karya UNPAR bagi Bangsa merupakan kompilasi dari buah karya para Bapak/Ibu/Romo/Suster dosen UNPAR dalam bidang penelitian dan pengabdian selama tahun 2019. Di dalam buku ini terekam berbagai capaian UNPAR dalam bidang penelitian dan pengabdian masyarakat yakni melalui karya- karya ilmiah berupa buku, artikel di jurnal internasional, artikel di jurnal nasional, buku dan bab dalam buku (internasional dan nasional), artikel di media non ilmiah (internasional, lokal/nasional), paten, hak cipta, perolehan hibah penelitian (Internal, RISTEKDIKTI dan External non RISTEKDIKTI), termasuk kegiatan pertemuan ilmiah di luar negeri sepanjang tahun 2019 ini. Rekaman karya penelitian dan pengabdian tahun 2019 ini menjadi sangat istimewa karena merupakan bagian penting di dalam penilaian kinerja penelitian dan pengabdian UNPAR pada periode 2016-2019 dan hasilnya membawa UNPAR berada di klaster Mandiri (peringkat 43 secara nasional untuk kinerja penelitian) dan di klaster “sangat bagus” (peringkat 35 secara nasional untuk kinerja pengabdian). Pencapaian ini menunjukkan peningkatan kinerja UNPAR di dalam bidang penelitian dan pengabdian masyarakat dalam kurun waktu tiga tahun terakhir (2016 – 2019). Sesuai dengan judul buku ini peningkatan kinerja tentunya tidak hanya dimaknai sebagai meningkatnya jumlah karya ilmiah yang dihasilkan oleh UNPAR saja akan tetapi diharapkan juga dapat meningkatkan dampak dari karya UNPAR yang telah dihasilkan bagi bangsa melalui berbagai bidang

fokus yang tertuang di dalam Rencana Induk Penelitian UNPAR 2016-2019 (pengentasan kemiskinan, perubahan cuaca dan keberagaman hayati, energi baru dan terbarukan, ketahanan dan keamanan pangan, integrasi nasional dan harmoni sosial, otonomi daerah dan desentralisasi, seni dan budaya/industri kreatif, infrastruktur, transportasi, dan teknologi, teknologi informasi dan komunikasi, dan pembangunan manusia dan daya saing bangsa) dan Rencana Induk Pengabdian Masyarakat 2017-2019 (pengembangan usaha kecil dan menengah/UKM), pendidikan inklusif, pengembangan kota dan daerah pemukiman, keadilan, perdamaian dan demokratisasi, kemitraan antar negara (South-South dan South-North), kesetaraan gender dan perlindungan anak, pola konsumsi dan produksi yang berkelanjutan, infrastruktur untuk sanitasi dan air bersih, dan infrastruktur, inovasi dan penguatan industri). LPPM memberikan apresiasi yang setinggi-tingginya bagi Bapak/Ibu/Romo/Suster peneliti dan pengabdi yang telah berupaya keras menghasilkan karya-karya ilmiah selama tahun 2019 ini. Kami juga mengucapkan banyak terima kasih pada berbagai pihak yang juga telah bekerjasama dengan LPPM di dalam pengelolaan kegiatan penelitian dan abdimas ini mulai dari pusat-pusat studi (sebagai sentral pengembangan keilmuan), para pengelola jurnal, para pimpinan fakultas, dan pimpinan jurusan. Kesemuanya secara berkesinambungan senantiasa memberikan dukungan dan support yang besar di dalam pengelolaan kegiatan P2M UNPAR. LPPM menyadari sepenuhnya bahwa peningkatan pemeringkatan UNPAR baik di dalam penelitian maupun pengabdian masyarakat di satu sisi memberikan kebanggaan tetapi di sisi lain juga memberikan tantangan dan target baru yang lebih tinggi guna mempertahankan dan lebih meningkatkan kinerja P2M UNPAR. LPPM juga menyadari adanya kekurangan-kekurangan di dalam layanan yang diberikan dan senantiasa terbuka untuk menerima kritik dan saran demi perbaikan kualitas layanan LPPM di masa mendatang. Buku ini selain memuat karya UNPAR di bidang penelitian dan pengabdian, juga memuat berbagai kompilasi gambar/foto dan narasi mengenai kegiatan kegiatan yang berkaitan dengan pusat studi, pengelolaan jurnal, berbagai kegiatan pengabdian (donor darah, program Kampung Berseri Astra, dsb.) dan berbagai liputan mengenai kegiatan-kegiatan yang diselenggarakan LPPM UNPAR selama tahun 2019 (berbagai kegiatan sosialisasi dan workshop, antara lain workshop penulisan proposal RISTEKDIKTI, workshop penulisan artikel jurnal internasional, dsb) sebagai bagian tak terpisahkan dari

8 laporan pertanggungjawaban kami didalam pengelolaan kegiatan penelitian dan pengabdian UNPAR selama tahun 2019. Akhir kata, kami mengucapkan selamat membaca buku Rekam Jejak Karya UNPAR bagi Bangsa, semoga dapat memberikan manfaat dan berharap agar karya-karya UNPAR dalam bidang P2M terus bertambah dan dapat semakin memberikan dampak yang besar dan luas bagi bangsa. Dirgahayu UNPAR.

Bandung, Januari 2020

Dr. Henky Muljana, S.T., M.Eng. Kepala Lembaga Penelitian dan Pengabdian kepada Masyarakat

DAFTAR ISI

Peningkatan Budaya Mutu dan Standar Kerja ...... 3 Catatan dan Bentuk Penghargaan Sebuah Karya ...... 5 Rekam Jejak Karya Unpar Bagi Bangsa ...... 7 Daftar Isi ...... 10 Bab 1: Penelitian dan Pengabdian (P2M) Dalam Angka ...... 12 Rekapitulasi Capaian Dosen Unpar Tahun 2019 ...... 12 Penelitian, Pengabdian dan Pertemuan Ilmiah ...... 17 Bab 2: Artikel Ilmiah ...... 24 Jurnal Internasional Terindeks Q1 dan Q2 ...... 24 Jurnal Internasional Tidak Terindeks Q1 dan Q2 ...... 46 Proceeding Terindeks Scopus ...... 59 Jurnal Nasional Terakreditasi SINTA 1 dan 2 ...... 67 Publikasi Karya Ilmiah pada Media Non Ilmiah Internasional) ...... 96 Publikasi Karya Ilmiah pada Media Non Ilmiah Nasional) ………………………….. 98 Bab 3: Buku dan Bab Dalam Buku ...... 100 Buku-Buku Lppm 2019 ...... 100 Bab Dalam Buku Nasional ...... 107 Bab Dalam Buku Internasional ...... 114 Bab 4: Seminar Internasional dan Nasional ...... 116 Bantuan Seminar Luar Negeri - Kemenristekdikti ...... 116 Best Presenter / Best Paper ...... 117 Pertemuan Ilmiah Luar Negeri ...... 120 Bab 5: Kekayaan Intelektual ...... 132 Paten ...... 132 Hak Cipta ...... 1326 Bab 6: Penelitian dan Pengabdian Dana Eksternal ...... 146

10 Penelitian Ristekdikti tahun Terakhir ...... 146 Penelitian dan Pengabdian Ristekdikti Berlanjut ...... 150 Penelitian dengan Dana Eksternal Lainnya ...... 155 Pengabdian Masyarakat Dana Eksternal Lainnya ...... 15560 Pengabdian Eksternal – Astra ...... 1603 Bab 7: Pusat Studi ...... 169 Pusat Studi Multidisiplin (Di Bawah LPPM) ...... 169 Pusat Studi Monodisiplin (Di Lingkungan Fakultas) ...... 186 Pusat Studi Baru Di Tahun 2019 ...... 215 Bab 8: Jurnal Elektronik ...... 217 Veritas Et Justitia (Sinta 2) ...... 217 Jurnal Ilmiah Hubungan Internasional (Sinta 2) ...... 220 Bab 9: Kegiatan-Kegiatan LPPM ...... 222 Kampung Berseri Astra Desa Sejahtera (KBADS) ...... 231 The Team ...... 237

BAB 1: PENELITIAN DAN PENGABDIAN (P2M) DALAM ANGKA

REKAPITULASI CAPAIAN DOSEN UNPAR TAHUN 2019

Berikut ini adalah tabel perbandingan capaian dosen UNPAR selama empat tahun terakhir (tahun 2016-2019). Data pada tabel ini diperoleh berdasarkan capaian semua dosen di seluruh Fakultas yang ada di UNPAR dan mencakup keseluruhan data capaian dari para dosen dalam bidang ilmunya masing-masing.

No Bentuk capaian di bidang 2016 2017 2018 2019 penelitian dan pengabdian kepada masyarakat 1 Buku 9 9 13 15 2 Artikel di Jurnal Internasional - Jurnal Internasional Terindeks Scopus 27 37 37 49 - Jurnal Internasional Lainnya 13 11 17 28 - Prosiding Terindeks Scopus 8 8 10 29 3 Artikel di Jurnal Nasional Terakreditasi 6 8 12 18 (SINTA 1 dan 2) 4 Artikel di Jurnal Nasional Non SINTA 1 27 41 51 59 dan 2 5 Bab dalam Buku Internasional 5 4 1 4 6 Bab dalam Buku Nasional 17 6 9 19 7 Artikel di Media Non Ilmiah Internasional 1 1 0 3 8 Artikel di Media Non Ilmiah 2 26 25 6 Lokal/Nasional

12 No Bentuk capaian di bidang 2016 2017 2018 2019 penelitian dan pengabdian kepada masyarakat 9 Pengumuman Paten 1 2 3 7 10 Pengajuan Paten 2 - 10 7 11 Paten dengan status Granted 0 0 0 3 12 Pengajuan Hak Cipta 17 20 24 39 13 Hibah RISTEKDIKTI 21 16 17 19 14 Kerja Sama dengan Pihak Luar (Dana 16 16 29 27 Eksternal) 15 Presentasi Seminar di Luar Negeri (Dana 4 0 2 1 RISTEKDIKTI) 16 Presentasi Seminar di Luar Negeri (Dana 31 55 45 48 UNPAR dan Eksternal non- RISTEKDIKTI)

Dari hasil rekapitulasi karya P2M dosen UNPAR dapat dilihat bahwa terjadi peningkatan capaian dari hampir semua kegiatan P2M mulai dari karya Ilmiah berupa penulisan buku (poin 1) sampai dengan kegiatan presentasi di seminar internasional (poin 16) dalam kurun waktu empat tahun terakhir (2016-2019). Hal ini menunjukkan konsistensi dan upaya keras dari para dosen peneliti dan pengabdi di dalam menjaga kinejanya pada kegiatan P2M, mulai dari perolehan pendanaan melalui hibah RISTEKDIKTI (poin 13), perolehan pendanaan melalui kerjasama dengan pihak eksternal (poin 14), diseminasi hasil P2M pada seminar luar negeri (poin 15-16), publikasi pada berbagai media ilmiah maupun non ilmiah baik level lokal/nasional dan internasional (poin 1-8), sampai pencatatan kekayaan intelektual melalui hak cipta dan paten (poin 9-12). Pada tahun 2019, LPPM telah mengkoordinasikan pengurusan kekayaan intelektual sebanyak 39 pengajuan hak cipta, dan 7 pengajuan paten. Di tahun ini juga terdapat 3 pengusulan paten yang telah disetujui (Granted).

KARYA ILMIAH BUKU

18 18 17 15 15 15 13 13

9 9 8 6

2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019

Dedikasi waktu dari para dosen UNPAR untuk menulis buku sebagai bagian dari pengembangan keilmuan dalam pengajaran serta hasil dari P2M telah menghasilkan 15 buah karya buku pada beragam bidang (lihat bab 3) mulai dari arsitektur, ilmu hukum, ilmu filsafat, ilmu administrasi publik dan studi pembangunan, teknik industri, teknik kimia dan teknik sipil. Pada tahun 2019, jumlah buku yang ditulis oleh dosen UNPAR meningkat dibandingkan tahun tahun sebelumnya, selain itu terjadi juga peningkatan pada penulisan karya ilmiah berupa bab dalam buku (internasional maupun nasional) jika dibandingkan dengan tahun 2018.

14 JURNAL INTERNASIONAL DAN PROSIDING TERINDEKS

106

64 64 48 30 5 3 5 9 22 25 28

2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019

Kategori Jurnal Internasional 2019 Terindeks Scopus Q1 16 Terindeks Scopus Q2 12 Terindeks Scopus Q3 11 Terindeks Scopus Q4 10 Jurnal internasional tidak terindeks SCOPUS 28 Prosiding terindeks scopus 29

Peningkatan cukup signifikan dapat dilihat pada capaian berupa penulisan artikel di jurnal internasional baik berupa jurnal internasional (terindeks Scopus dan tidak terindeks Scopus) dan prosiding terindeks Scopus dengan total sebanyak 48 artikel pada tahun 2016 meningkat menjadi total 106 artikel di tahun 2019. Khususnya pada tahun ini, LPPM mencatat prestasi dari para dosen dimana sebanyak 28 artikel berhasil dimuat pada jurnal internasional terindeks scopus Q1 dan Q2. Jumlah ini meningkat dibandingkan tahun 2018, dimana pada tahun tersebut jumlah publikasi pada jurnal internasional terindeks Scopus Q1 dan Q2 sebanyak 20 artikel. Hal ini juga menunjukkan bahwa kinerja serta kualitas dari artikel ilmiah yang dihasilkan dosen dosen UNPAR semakin meningkat. Peningkatan kualitas seiring dengan meningkatnya jumlah publikasi pada jurnal internasional bereputasi menunjukkan peningkatan juga reputasi dan kredibilitas para dosen pada bidang keilmuan masing masing.

JURNAL NASIONAL TERAKREDITASI (SINTA 1 & 2)

Jurnal Nasional Terakreditasi (SINTA 1 & SINTA 2)

18 12 10 8 2 6 2 2 3 8 6 8

2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019

JURNAL NASIONAL NON SINTA 1 & 2

59 51 41 27 16 20 8 9 16 22 18

2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019

Demikian pula dengan karya ilmiah berupa artikel yang dimuat dalam jurnal nasional terakreditasi Sinta 1 dan 2 mengalami peningkatan yang besar dalam kurun waktu 4 tahun terakhir, dari total sebanyak 6 artikel (tahun 2016) menjadi 18 artikel (tahun 2019). Sementara itu karya karya dosen UNPAR yang dimuat di dalam jurnal nasional non Sinta 1 dan 2 juga mengalami peningkatatan pada tahun 2019 ini (sebanyak 59 artikel). Publikasi artikel pada jurnal internasional dan jurnal nasional merupakan salah satu syarat capaian pada berbagai hibah penelitian baik hibah dana internal UNPAR maupun dana eksternal dan juga merupakan persyaratan bagi para dosen di dalam mengusulkan kenaikan jabatan fungsional ke jenjang Lektor Kepala dan Guru Besar. Oleh karena itu LPPM senantiasa memberikan dukungan dan akan memfasilitasi penulisan artikel pada jurnal internasional maupun nasional misalnya melalui penyelenggaraan berbagai workshop terkait penulisan artikel.

16 PENELITIAN, PENGABDIAN DAN PERTEMUAN ILMIAH

PENELITIAN & PENGABDIAN DANA EKSTERNAL

46 46 37 29 32 24 20 21 21 1 14 11

2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019

Pencapaian dari karya ilmiah para dosen UNPAR sangat berkaitan erat juga dengan pendanaan yang diperoleh untuk kegiatan P2M para dosen lewat skema pendanaan eksternal maupun melalui skema pendanaan internal UNPAR. Pendanaan eksternal diperoleh para dosen melalui berbagai sumber antara lain RISTEKDIKTI (hibah RISTEKDIKTI, SAME), kerjasama industri/perusahaan (seperti ASTRA, Ecogreen, Toray), kerjasama dengan instansi pemerintahan (Bappenas), maupun kerjasama luar negeri (KIST, Universiti Petronas). Hal ini menunjukkan semakin bervariasinya sumber dana P2M ini dan tidak hanya berfokus pada akses dana hibah dari RISTEKDIKTI saja. Pada tahun 2019 ini, UNPAR sebagai salah satu perguruan tinggi di klaster penlitian Mandiri juga mendapat invitasi dari Kementerian Keuangan untuk mengirimkan proposal penelitian dengan skema Program Pendanaan Riset Inovatif-Produktif (RISPRO) Invitasi LPDP 2020. Perolehan pendanaan P2M skema eksternal tahun 2019 adalah sebanyak 46 hibah dan ini sama dengan perolehan dana hibah eksternal pada tahun 2018. LPPM akan lebih mendorong peran serta dari para dosen untuk dapat mengakses berbagai skema pendaan P2M yang ada, maupun sumber dana lainnya. LPPM juga mencatat data mengenai akses dana penelitian maupun dana pengabdian kepada masyarakat dari berbagai program studi dan rekapnya pada setiap fakultas. Data data dalam grafik berikut ini menunjukkan jumlah akses dana internal dari setiap fakultas (termasuk data hibah pengabdian lembaga) selama kurun waktu 2015-2019.

PENELITIAN DANA INTERNAL

20 20 20 17 16 15 14 13 12 12 11 11 1010 10 10 9 9 8 8 8 7 6 4 1 0 0 1 1 5 3 3 0 0 1

EKONOMI HUKUM ISIP TEKNIK FILSAFAT TI TIS

2015 2016 2017 2018 2019

PENGABDIAN DANA INTERNAL

7 7 7 6 6 6 6 5 5 5 5 5 5 4 4 4 4 4 3 3 3 3 3 3 3 2 2 2 2 2 2 1 1 1 1

EKONOMI HUKUM ISIP TEKNIK FILSAFAT TI TIS

2015 2016 2017 2018 2019

Dapat dilihat terjadi fluktuasi jumlah akses dana hibah P2M internal dari setiap fakultas. Hal ini sangat dipengaruhi dengan beragam kegiatan P2M yang dilakukan pada masing masing prodi untuk setiap tahunnya. Tabel berikut menunjukkan jumlah penelitian dan pengabdian kepada masyarakat dengan dana Internal UNPAR yang diakses oleh masing masing program studi pada tahun 2019. Ada beberapa program studi yang tidak mengakses dana P2M internal, namun melakukan penelitian dan pengabdian

18 masyarakat dengan pendanaan lain seperti dana eksternal maupun skema dana mandiri. Tabel Rekapitulasi Penelitian dan Pengabdian kepada Masyarakat Dana Internal Tahun 2019 No Jurusan Fakultas Jumlah Jumlah Penelitian Pengabdian 1 Ekonomi Ekonomi 2 0 2 Manajemen Ekonomi 3 2 3 Akuntansi Ekonomi 4 2 4 Hukum Hukum 1 4 5 Administrasi Publik Ilmu Sosial dan 0 0 Politik 6 Administrasi Bisnis Ilmu Sosial dan 3 0 Politik 7 Hubungan Ilmu Sosial dan 7 3 Internasional Politik 8 Teknik Sipil Teknik 0 0 9 Arsitektur Teknik 14 7 10 Filsafat Filsafat 1 5 11 Teknik Industri Teknologi 11 1 Industri 12 Teknik Kimia Teknologi 8 0 Industri 13 Teknik Elektro Teknologi 1 0 Konsentrasi Industri Mekatronika 14 Teknik Informatika Teknologi 5 3 Informasi dan Sains

15 Matematika Teknologi 5 2 Informasi dan Sains

16 Fisika Teknologi 3 0 Informasi dan Sains

Total 68 29

Jumlah dokumen dan sitasi dosen UNPAR di SINTA per akhir Desember 2019 Berikut ini adalah informasi yang diperoleh dari web Science and Technology Index (SINTA) untuk rekapitulasi indeks karya ilmiah para peneliti dari beberapa sumber pengindeks yakni Google Scholar, Scopus, dan pada tahun 2019 ini telah ditambahkan Web of Science sebagai sumber pengindeks lainnya.

Berdasarkan data dari SINTA (per 20 Desember 2019) tercatat sebanyak 612 artikel karya dosen UNPAR yang masuk dalam indeks Scopus, sebanyak 145 artikel masuk dalam indeks Web of Science dan sebanyak 5733 artikel diindeks oleh Google Scholar. Apabila dibandingkan dengan data SINTA pada bulan Desember tahun 2018, terdapat peningkatan jumlah artikel yang dihasilkan dosen UNPAR dan terindeks Scopus dimana tercatat jumlah karya ilmiah terindeks Scopus pada tahun tersebut adalah sebanyak 499. Hal ini menunjukkan peningkatan upaya dari para dosen UNPAR untuk menghasilkan karya ilmiah yang semakin berkualitas. Peningkatan kualitas dari karya ilmiah yang dihasilkan oleh para dosen UNPAR juga nampak pada peningkatan jumlah sitasi karya ilmiah terindeks Scopus dari 3402 (tahun 2018) menjadi 4085 (tahun 2019). Tentunya hal ini perlu dipertahankan dan LPPM mendorong serta mendukung upaya para dosen untuk semakin meningkatkan kualitas karya tulisnya dengan memperkuat peranan dan fungsi pusat-pusat studi sebagai sentral pengembangan keilmuan melalui kegiatan penelitian yang hasilnya diterapkan pada pengembangan pengajaran dan kegiatan pengabdian kepada masyarakat. Penambahan Web of Science sebagai sumber pengindeks karya ilmiah pada SINTA ini memberikan tantangan baru bagi para dosen UNPAR untuk dapat menghasilkan karya ilmiah yang diterima pada jurnal jurnal yang terindeks oleh lembaga tersebut.

Apabila dibandingkan dengan data SINTA tahun 2018 20 Desember Data SINTA Desember 2018 2019 Dokumen Scopus 499 612 Citation Scopus 3402 4085 Dokumen Google Scholar 4124 5733 Citation Google Scholar 17605 21498

Berikut adalah daftar 10 dosen UNPAR dengan skor SINTA tertinggi pada 3 tahun terakhir. Skor SINTA ini dihitung melalui formula yang telah ditetapkan oleh tim penilai SINTA berdasarkan jumlah dokumen artikel dan non artikel terindeks Scopus termasuk jumlah sitasinya serta jumlah sitasi di Google Scholar.

Ranking 10 besar dosen UNPAR berdasarkan SINTA Score untuk 3 tahun terakhir SIN TA Google sco SINTA Scopus Nama dosen Jurusan Scholar re score H-index H-index (3 th) Arenst Andreas, S.T., S.Si, Teknik Kimia 5.55 26.05 8 11 M.Sc., Ph.D. Teknik Elektro Nico Saputro, Konsentrasi 5.23 27.57 9 12 S.T., M.T., Ph.D. Mekatronika Teknik Elektro Tua Agustinus Konsentrasi 4.6 14.27 5 6 Tamba, Ph.D. Mekatronika Hans Kristianto, Teknik Kimia 4.26 6.59 3 4 ST., MT. Aswin Lim, Teknik Sipil 4.22 10.05 4 6 Ph.D. Dr. Purnama Salura, Ir., M.T., Arsitektur 3.98 7.43 2 9 MBA Dr. Veronica Sri Teknik Moertini, Ir., 3.91 9.6 4 8 Informatika M.T. Dr. Bobby Minola Ginting, Teknik Sipil 2.63 2.87 2 5 S.T., M.T. Prof. Dr. Hamfri Akuntansi 2.45 2.62 1 2 Djajadikerta Dr. Jenny Novianti Muliarahayu Teknik Kimia 2.31 8.35 3 3 Soetedjo, S.T., M.Sc.

BAB 2 ARTIKEL ILMIAH

Bab ini berisi capaian dosen UNPAR berupa artikel yang terbit baik di jurnal ilmiah, prosiding, maupun di media non ilmiah. Data berikut ini dibagi berdasarkan: 1. Jurnal Internasional Terindeks Q1 dan Q2 2. Jurnal Internasional Tidak Terindeks Q1 dan Q2 3. Prosiding Terindeks Scopus 4. Jurnal Nasional Terakreditasi SINTA 1 dan 2 5. Jurnal Nasional Non SINTA 1 dan 2 6. Media Non Ilmiah Internasional 7. Media Non Ilmiah Nasional JURNAL INTERNASIONAL TERINDEKS Q1 & Q2

Application of Road Engineering NSPM Action Programs on Sub-National Road in Indonesia

1 Jurnal Edisi International Journal on Advanced Vol. 09; No. 01 (2019) Science, Engineering and Information Technology (IJASEIT)

Abstrak

In Indonesia, the norm, the standard, the guidelines, and the manual regarding road engineering for sub-national roads are known as road engineering NSPM. Application of a road engineering NSPM action program is crucial to increase roadworthiness and infrastructure resilience. Sub-national roads in Indonesia are roads at a province, regency, and city level. This research aims to find out the identification and evaluation of existing road conditions of sub-national roads in Indonesia. This research also aims to identify difficulties to increase road engineering NSPM application on sub-national roads. This research recommends action programs to attain roadworthiness of 75 percent of sub-national road length in Indonesia between the years 2015-2019. Sub-national roads in six provinces in Indonesia are the location of case studies. The provinces are Riau, particular region province of Yogyakarta, province of South Kalimantan, province of South Sulawesi,

24 province of Bali, and the province of Maluku. Survey data show that province roads have fulfilled 66 percent of roadworthiness, regency roads have fulfilled 63 percent, and city road has fulfilled 81 percent. The difficulties in NSPM application are the limited support of the financial facility, and substandard application of human resource ability, dissemination of NSPM, evaluation of performance, road technical guidance, and observation on-site. The research methodology used is based on a physical existing road condition. Finally, there is a recommendation of action programs that can be instituted, i.e. dissemination of regulations regarding guidelines of road function and status in Indonesia, regulation of Public Work Ministry of Republic of Indonesia no 03/PRT/M/2012, regular application of technical training and coaching about accurate location where road engineering NSPM will be applied to local government by central government, regular application of technical training and coaching about road infrastructure resilience, and application of road engineering NSPM on sub-national roads, including monitoring and evaluation both internally and externally.

Nama Anastasia Caroline Sutandi, Ir., M.T., Ph.D.

Fakultas Jurusan Penulis Ke Teknik Teknik Sipil 1

Pedestrian Facilities as a Part of Road Infrastructure Resilience in Large Cities in Indonesia

2 Jurnal Edisi International Journal on Advanced Vol. 09; No. 05 (2019) Science, Engineering and Information Technology

Abstrak

Road infrastructure resilience is critical to reach disaster resilience. Disaster not only occurs and impacts the location outside cities, but also in an area with a large number of the population, like cities. In large cities, pedestrian facilities are the important road infrastructure facilities besides roadway infrastructure, both in the normal daily condition and during evacuation if there is a disaster. Unfortunately, pedestrian facilities in the city are not yet seriously taken into account. The aim of this paper is, first, identification of the availability of pedestrian facilities, second, fulfillment of the facilities based on the regulation in Indonesia, and third, recommendation to implement items of pedestrian facilities based on pedestrians’ opinion. Case study is carried out on two major roads in a large city, Bandung, Indonesia, with a high number of pedestrians because there are various activities happening along the streets, for example, working, studying, shopping, and sightseeing. The method used is an interview, questionnaire, and essential performance analysis, with 18 pedestrian facility indicators — seven hundred and eighty-two pedestrians as respondents involved in this paper. The analysis is done based on respondent demographics and based on significant rate and priority rate of respondents’ opinion.

Results indicated that not all of the pedestrian facilities had been implemented according to regulation in Indonesia. Furthermore. based on respondents’ opinion, the most important and priority items of pedestrian facilities to be applied as soon as possible are street lighting, pedestrian ramps for disabled persons, CCTV, and trash bins. Fulfillment of all pedestrian facilities will enhance road infrastructure resilience through reduction of casualty if no disaster occurs and through reduction of risk during evacuation if disaster occurs.

Nama Anastasia Caroline Sutandi, Ir., M.T., Ph.D.

Fakultas Jurusan Penulis Ke Teknik Teknik Sipil 1

Penulis UNPAR Prof. Paulus Pramono Rahardjo, Ir., MSCE., Ph.D.

Performance and Three-Dimensional Analyses of a Wide Excavation in Soft Soil with Strut-Free Retaining System 3 Jurnal Edisi International Journal of Geomechanics Vol. 18 No. 09 (2018)

Abstrak

This paper presents the results of monitoring the diaphragm wall and ground surface settlement and three-dimensional finite element analyses of the Xizhi excavation case history. The Xizhi excavation was 9.2 m deep, covering an area of about 195.7 m × 88.6 m. The soil layers above the final excavation level are dominated by a soft-to-medium clay layer (NSPT = 2–7) and a loose silty sand layer (NSPT = 2– 6). Because of its large excavation geometry, this project utilized diaphragm walls, buttress walls (BWs), and partial floor slabs as a BW strut-free retaining system to reduce the construction cost and period. This project was successfully constructed with a ratio of the maximum wall deflection to excavation depth equal to 0.55% and a maximum ground surface settlement of 27 mm. The mechanism of the BW strut- free retaining system in controlling wall deflections was governed by two factors: the combined stiffness between the buttress and diaphragm walls and the frictional resistance between BWs and adjacent soils, where they contributed 72% and 10.5% reduction of the wall deflection, respectively. In addition, the effectiveness of the first partial floor slabs in reducing the top wall deflection depended on the length of the diaphragm wall. The shape, location, and length of BWs had only moderate effects, while the groundwater level had a major effect on the performance of the BW strut- free retaining system. Nama Aswin Lim, Ph.D.

Fakultas Jurusan Penulis Ke Teknik Teknik Sipil 1

Three-dimensional numerical study of long-term settlement induced in shield tunneling 4 Jurnal Edisi Tunnelling and Underground Space Vol. 88; No. 221 (2019) Technology

Abstrak

The objective of this study is to examine the mechanism of the long-term settlement induced in shield tunneling. A series of finite element analysis were conducted using PLAXIS 3D on a well document shield tunneling case in Taipei Mass Rapid Transit System. Various simulation were executed assessing the impact of consolidation on long-term settlement using Soft Soil and Hardening Soil with Small-strain models. Simulation to assess the impact of the creep behavior of the soil on the long-term settlement was also executed using the Soft Soil Creep model. The computed surface settlements were compared to the field measurements. It was found from this study that the computed settlement matched the field measurement when creep behavior of the soft soil was considered but if creep was not accounted for, the computed settlement undervalued the field measurements. Finally, a series of parametric study was executed to examine the influence of various parameters on the long-term settlement. The results obtained from the parametric study of shield tunneling in thick clay clearly distinguished that mechanism of long-term settlement in shield tunneling is predominantly due to creep behavior of the soft soil since consolidation constitutes 5% of the total settlement while creep accounts for 80% of the total settlement. Nama Aswin Lim, Ph.D.

Fakultas Jurusan Penulis Ke Teknik Teknik Sipil 3

Investigation of the integrated retaining system to limit deformations induced by deep excavation 5 Jurnal Edisi Acta Geotechnica Vol. 13: No. 04 (2018)

Abstrak

A series of three-dimensional finite element analyses of deep excavations with the integrated system between buttress walls and diaphragm walls was conducted to investigate the effect of the buttress wall intervals, treatments, locations, height, and thickness on limiting deformations induced by deep excavation. The integrated retaining system was formed by maintaining buttress walls when soil was excavated. The wall deflection control mechanism of the integrated retaining system mainly

came from the combined stiffness between the buttress wall and the diaphragm wall. In addition, the ground settlement control mechanism came from the combined stiffness between the buttress wall and the diaphragm wall, and the frictional resistance between the buttress wall and the surrounding soil. For achieving 50% reduction in the wall deflection and the ground surface settlement, the length and intervals of buttress walls that were applied to the integrated retaining system were at least 4 and 8 m, respectively. When the deflection at the diaphragm wall head was well restrained, for example, by the floor slab, the position of the buttress wall head could be located at a depth the diaphragm wall starts to bulge out. In such a case, the performance between the full height and limited height of buttress walls was quite close. Furthermore, a new well-documented excavation project was analyzed to verify the performance of the integrated retaining system. Results showed that the integrated retaining system worked excellently if the joints between buttress walls and diaphragm walls were constructed properly. Nama Aswin Lim, Ph.D.

Fakultas Jurusan Penulis Ke Teknik Teknik Sipil 1

Segmentation, Classification, and Determinants of In-store Shopping Activity and Travel Behaviour in the Digitalisation 6 Era: The Context of a Developing Country

Jurnal Edisi Sustainability Vol. 11; No. 1591 (2019)

Abstrak

The influence of digital technologies in the current era has substantially affected the way individuals engage with in-store shopping activities and travels. To prepare a transport policy with sustainable orientations, it is important to investigate factors that determine in- store activity-travel patterns. In particular, knowledge about how in-store activities and travels interact with other forms of activities and travels should be updated, since the use of Information and Communications Technology (ICT) may be substantial to create new patterns of activity and travel. It is believed that shopping travel and activity behaviours may indicate the increase or decrease of physical travels, which is crucial for carbon emission measures in transportation sector. While numerous studies about this issue have been recently carried out based on the context of developed countries, little is known for the context of developing countries. To offer a better understanding of the nature of in- store shopping travels and activities in the digitalisation era, a household survey was conducted in Bandung, Indonesia. This survey tends to acquire data from respondents as a representation of developing countries on their shopping behaviour, travel characteristics, and spatial attributes that represent the conditions of their built environment. The results from the survey show that individuals in a developing country are still having interest in in-store grocery shopping even though their daily life has a close connection with digital life. The results of the analysis show that grocery shoppers in a developing country simultaneously consider shopping activity, other activities, modes of

28 transport, and shopping expenses. This manifests in the form of trip-chaining activities and affects decisions on the modes of transport used. The results indicate a significant portion of trip frequency for in-store shopping travel with motorised modes. Since motorised modes are the main contribution for carbon emission production in transportation sector, the results of this study are critical for developing transport demand measures and setting relevant policy schemes to improve the sustainability of transportation system, especially for the context of developing countries. Nama Tri Basuki Joewono, Ph.D.

Fakultas Jurusan Penulis Ke Teknik Teknik Sipil 1

Do motorcycle-based ride-hailing apps threaten bus ridership? A hybrid choice modeling approach with latent variables 7 Jurnal Edisi Public Transport Vol. 30; No. 11 (2019)

Abstrak

The emergence of motorcycle-based ride-hailing services provides more transportation options to users in developing countries like Indonesia. However, many people currently believe that the availability of these new options threatens the demand for public transportation. This study aims to understand the latent factors that influence passengers to prefer bus service over motorcycle-based ride-hailing. The study includes 19 variables and applies a hybrid choice model by employing 703 bus passenger responses in Yogyakarta, Indonesia. Our analysis shows three latent variables that most significantly impact the selection of bus service over motorcycle- based ride-hailing: forced bus use, bus service quality, and favorable conditions for bus use. These three variables were influential enough to outweigh the potential time and cost savings of motorcycle ride-hailing. The results also indicate that the decision of which option to use is significantly influenced by users’ age and income. Lastly, results of our analysis show that future bus service demand will depend on how much buses can improve to meet users’ needs, if they are to win the competition over transportation options that can be booked online such as motorcycle ride-hailing. Nama Tri Basuki Joewono, Ph.D.

Fakultas Jurusan Penulis Ke Teknik Teknik Sipil 3

Development of Nationwide Surface Spectra Acceleration Maps for Earthquake Resistant Design of Bridges Based on The National Hazard Maps of Indonesia 2017 8 Jurnal Edisi Journal of Engineering and Technological Vol.51; No. 04 (2019) Sciences

Abstrak

Spectral acceleration at the ground surface, including peak ground acceleration, provides essential information for earthquake resistant design and must be provided to bridge engineers in easily accessible media. Spectra acceleration maps are one way to deliver such information, but unfortunately the most recent Indonesian earthquake resistant design standard for bridges, SNI 2833-2016, only provides maps of earthquake hazard at bedrock. The development of earthquake acceleration maps at the ground surface for Indonesia in this study was based on earthquake hazard maps at bedrock with probability of exceedance (PE) 7% in 75 years, i.e. equal to an earthquake with a return period of 1034 years. Site conditions were adopted from the nationwide Vs30 map of Indonesia proposed by Irsyam (2017), which is a modified version of the Vs30 map proposed by Imamura & Furuta (2015). Site conditions combined with hazard value were used to determine the amplification factors according to the criteria in SNI 2833-2016 and then multiplied with hazard at bedrock to obtain surface spectra acceleration maps. The resulting maps are very useful for determining earthquake loads for bridge design at the preliminary design stage. Improvements to incorporate more advanced calculation methods and updated data in a future research are recommended and very feasible. Nama Siska Rustiani, Ir., M.T.

Fakultas Jurusan Penulis Ke Teknik Teknik Sipil 6

Utilization of The Indonesian’s Spent Tea Leaves as Promising Porous Hard Carbon Precursors for Anode Materials in Sodium Ion Batteries 9 Jurnal Edisi Waste and Biomass Valorization Vol. 04; No. 03 (2019)

Abstrak

Sodium ion battery (SIB) has become one of the alternative battery system to replace lithium ion battery in the future. The abundant resource and low price of sodium are the main reasons for the development of SIB. However, the absence of suitable anode materials for SIB is the main problem for the commercial application of SIB. Graphite, the well known anode material in LIB, can not be used in SIB due to the larger size of sodium ions. In this present work, spent tea leaves were used as porous carbon precursors for anode materials in SIB. Porous hard carbons were prepared

30 by three simple processes such as the direct carbonization, the hydrothermal carbonization and combination of hydrothermal and pyrolysis carbonization. When utilized as anodes in SIB, the best carbon electrodes performed a first discharge capacity as high as 363 mAh g⁻¹ and maintained a stable cycle profiles with high discharge capacity of 179 mAh g⁻¹ after 100 cycles at a current density of 100 mA g⁻¹. These excellent performances were attributed to synergistic effects of the large interlayer spacing, unique morphology and high degree of disordered carbon which can provide more active sites for sodium storage and diffusion. Based on the renewable and abundant advantage as well as simple preparation process, porous hard carbon materials originated from spent tea leaves may become promising anode materials for SIB. Nama Arenst Andreas, S.T., S.Si, M.Sc., Ph.D.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Kimia 1

Activated porous carbon originated from the Indonesian snake skin fruit peel as cathode components for lithium sulfur battery 10 Jurnal Edisi Ionics - International Journal of Ionics The Vol. 25; No. 05 (2019) Science and Technology of Ionic Motion

Abstrak

Activated porous carbons originating from the Indonesian snake skin fruit peel has been prepared by carbonization process followed by the ZnCl2 activation process. This porous carbon was then applied as cathode component along with sulfur in lithium sulfur (Li–S) batteries. The carbon materials possessed a high surface area of 2247 m² g⁻¹ and a large pore volume of 1.97 cm³ g⁻¹ with sulfur loading of 63%. From the x-ray diffraction (XRD) patterns, Raman analysis, and SEM observation of the composites, it was shown that the sulfur was uniformly encapsulated inside the carbon pores, which was beneficial for the optimum utilization of sulfur and the confinement of soluble lithium polysulfides. The fabricated carbon-sulfur composite electrodes demonstrated an initial specific capacity of 945 mAh g⁻¹ and good capacity retention until the 100th cycle at 0.1 C rate. At high C rate (1 and 2 C), the composite electrodes exhibited specific discharge capacity of 538 and 466 mAh g⁻¹ until the 100th cycle, respectively. Those excellent electrochemical performances were attributed to the high surface area, combination of micropore/mesopore structures and low average pore diameter of porous carbons. Nama Arenst Andreas, S.T., S.Si, M.Sc., Ph.D.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Kimia 1

Penulis UNPAR Hans Kristianto, S.T., M.T.

Preparation of salacca peel-based porous carbons by K2CO3 activation method as cathode materials for LiS battery 11 Jurnal Edisi Carbon Letters Vol. 01; No. 01 (2019)

Abstrak

Hierarchical porous carbons (HPCs) with different structures from micropores to macropores hierarchical pores were synthesized from biomass waste salacca peels via K2CO3 activation process. HPCs with high surface area of 2234 m2/g and pore volume of 1.25 cm3/ were obtained at K2CO3/carbon ratio higher than 3 and activation temperature of 800 C. Carbon/Sulfur (C/S) composites were then prepared with a high sulfur content of 62 wt%, as confirmed by TGA results. The composites were then used as cathodes for lithium sulfur (LiS) batter. High specific discharge capacities of more than 780 mAh/g were shown by the C/S composites at current density of 0.5 C-rate. After 500 cycles at 0.5 C, a high discharge capacity of 496 mAh/g was achieved, revealing excellent capacity retention. Nama Arenst Andreas, S.T., S.Si, M.Sc., Ph.D.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Kimia 1

Penulis UNPAR Hans Kristianto, ST., MT.

Waste tea-based porous carbon–sulfur composite cathodes for lithium–sulfur battery 12 Jurnal Edisi Ionics Vol. 01; No. 01 (2019)

Abstrak

In this work, waste tea-based porous carbons were prepared by hydrothermal carbonization and then followed by the chemical activation using KOH and ZnCl2. As-prepared porous carbons were then used to host sulfur as composite cathodes for lithium–sulfur (LiS) battery system. The porous carbon–sulfur composite electrodes with optimized sulfur loading of 60 wt% exhibited the best electrochemical performance by delivering initial specific capacity of 1048 mAh g⁻¹ at 0.05 C and maintained specific capacity of 627 mAh g⁻¹ after 100 cycles. Moreover, it showed good capacity retention of 428 mAh g⁻¹ at 0.5 C even after 100 cycles, which demonstrates its promising roles as host material for sulfur cathodes in LiS batteries.

32 Nama Arenst Andreas, S.T., S.Si, M.Sc., Ph.D.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Kimia 1

Penulis UNPAR Hans Kristianto, S.T., M.T.

Rambutan peel based hard carbons as anode materials for sodium ion battery 13 Jurnal Edisi Fullerenes, Nanotubes and Carbon Vol. 27; No. 02 (2019) Nanostructures

Abstrak

Sodium (Na) ion battery (NIBs) are considered as one of the most prospective battery system to substitute lithium ion batteries (LIBs) especially for stationary applications. In this study, rambutan peels were selected as carbon precursors to prepare hard carbons as anode materials for NIBs. Hard carbons were prepared by applying hydrothermal carbonization and then continued by the pyrolysis treatment at different temperatures (800, 1000 and 1200 °C). The electrochemical studies were carried out by cyclic voltammetry (CV) and galvanostatic charge discharge (GCD). The obtained hard carbons at pyrolysis temperature of 1000 exhibited the best electrochemical performance. It showed the highest reversible capacity of 225 mAh g−1 (0.1 C-rate, 1 C = 300 mA g−1) after 100 cycles if tested as the anode materials for NIBs. It is attributed to the disordered carbon structure, low degree of graphitization, large interlayer spacing and flake-like morphology of carbon sample which can provide more space for sodium storage and facilitate sodium ion transfer. Nama Arenst Andreas, S.T., S.Si, M.Sc., Ph.D.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Kimia 1

Penulis UNPAR Hans Kristianto, S.T., M.T.; Dr. Henky Muljana, S.T., M.Eng.

Hard carbons derived from waste tea bag powder as anodes for sodium ion battery 14 Jurnal Edisi Materials Technology Vol. 34, No. 09 (2019)

Abstrak

In recent years, biomass-based hard carbons have become main interest in sodium battery research community because of the abundant availability, cheap and excellent electrochemical performance. Here, hard carbons derived from waste tea bag powder have been prepared by hydrothermal carbonization and then followed by the physical activation. The hard carbons possessed sheet-like structures which contained sufficient mesopore and micropore structures to assist the sodium ion transport and electrolyte penetration. The interlayer spacing of the obtained hard carbons is larger than that of graphite which can allow the insertion/extraction of sodium ions during charge-discharge process. When utilized as anodes for sodium ion batteries, the hard carbons performed stable cycle profiles, maintaining a specific capacity of 193 mAh g−1 until the 100th cycle at a current density of 100 mA g−1 and capacity of 127 mAh g−1 after 200 cycles under a current density of 1000 mA g−1. Nama Arenst Andreas, S.T., S.Si, M.Sc., Ph.D.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Kimia 1

Apricot shell derived hard carbons and their tin oxide composites as anode materials for sodium ion batteries 15 Jurnal Edisi Journal of Alloys and Compounds Vol. 788; No. 01 (2019)

Abstrak

To be used in sodium ion batteries, preparation of the hard carbon anode materials from the bio waste source of apricot shell (AS) via hydrothermal carbonization (HTC) is introduced. Further pyrolysis at different temperature conditions are applied in order to attain sufficient conductivity and higher surface area that are essential for battery applications. With the purpose of increasing the sodium storage capacity values, SnO2 nanoparticles under HTC conditions are also incorporated into the AS derived carbons. The superior capacity values are obtained with 1000 °C temperature treated hard carbon anode materials with 184 mAh/g of capacity over 250 cycles. In-situ preparation method for the SnO2 hard carbon anode results much improved electrochemical properties. In contrast, mechanically mixing of SnO2 with hard carbon results fast capacity fading since SnO2 particles are not coated with AS

34 derived carbon which functions as volume expansion suppressor of the nanoparticles. Nama Arenst Andreas, S.T., S.Si, M.Sc., Ph.D.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Kimia 3

Extended flat voltage profile of hard carbon synthesized using a two step carbonization approach as an anode in sodium ion 16 batteries Jurnal Edisi Journal of Power Source Vol. 430; No.1 (2019)

Abstrak

Hard carbon is a promising anode material for sodium ion batteries (NIBs). In this study, a two-step carbonization approach is developed to enhance the electrochemical performance of lignocellulose biomass-derived hard carbon. The first step comprises slow low-temperature pyrolysis of fir wood that produces an amorphous carbon in which hexagonal planes are embedded in the amorphous carbon region to some extent. The second step comprises high-temperature carbonization at 1300 °C, which yields a hard carbon with a high degree of graphitization, an increased layer-plane length, and a low micropore volume. Two- step carbonized hard carbon delivers a large reversible capacity of 276 mAh g−1 at 50 mA g−1 after 100 cycles and high rate capacities of 108 mAh g−1 at 1.0 A g−1 and 76.3 mAh g−1 at 2.5 A g−1. The low-voltage plateau capacity below 0.1 V is 194 mAh g−1. The results of these experiments indicate that the exceptional electrochemical performance of two-step carbonized hard carbon arises from the effective suppression of micropore formation and a good balance between the degree of graphitization and number of defect sites. High-voltage adsorption of Na+ ions in micropores inhibits Na+-ion diffusion into the graphitic region of micropore- enriched hard carbon. Nama Ratna Frida Susanti, Ph.D.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Kimia 4

A Data-Driven Approach to Product Usage Context Identification From Online Customer Reviews 17 Jurnal Edisi Journal of Mechanical Design Vol. 141; No. 12 (2019)

Abstrak

This paper proposes a data-driven methodology to automatically identify product usage contexts from online customer reviews. Product usage context is one of the factors that affect product design, consumer behavior, and consumer satisfaction. The previous works identify the usage contexts using survey-based method or subjectively determine them. The proposed methodology, on the other hand, uses machine learning and Natural Language Processing tools to identify and cluster usage contexts from a large volume of customer reviews. Furthermore, aspect sentiment analysis is applied to capture the sentiment towards a particular usage context in a sentence. The methodology is implemented to two data sets of products, i.e., Laptop and Tablet. The result shows that the methodology is able to capture relevant product usage contexts and cluster bigrams that refer to similar usage context. The aspect sentiment analysis enables the observation of a product's position with respect to its competitors for a particular usage context. For a product designer, the observation may indicate a requirement to improve the product. It may also indicate a possible market opportunity in a usage context in which most of the current products are perceived negatively by customers. Finally, it is shown that overall rating might not be a strong indicator for representing customer sentiment towards a particular usage context, due to the moderate linear correlation for most of the usage contexts in the case study. Nama Dedy Suryadi, Ph.D.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Industri 1

Improving Occupational Safety and Health in Footwear Home Industry through Implementation of ILO-PATRIS, NOSACQ-50 18 and Participatory Ergonomics: A Case Study Jurnal Edisi International Journal of Technology Vol. 10; No. 05 (2019)

Abstrak

Indonesia’s footwear industry ranks fifth amongst world exporting countries, after China, India, Vietnam and Brazil, with a share of the international market of 4.4% (Julianto, 2017). As one of Indonesia's most productive economic industries, the footwear sector is divided into two categories: formal (licensed) and informal (unlicensed) home-based manufacturers. In practice, the informal sector is less

36 concerned with the aspects of facilities provided, work environment and safety. Furthermore, home-based manufacturers recruit employees who have excellent skills in shoemaking without prioritizing the status of their education (ILO, 2004).The Government Regulation of the Republic of Indonesia Number 50 of 2012 concerning Occupational Safety and Health (K3) requires that the safety and health of workers is ensured through the prevention of occupational injuries and diseases. In Indonesia, the protection of employee rights was already included in the Constitution of Work Safety Act No.1 of 1970. This law covers all workplaces and emphasizes primary prevention. Moreover, the recently passed Manpower Act (Law No. 13 of 2003) refers to Articles 86 and 87; all owners are required to provide their employees with a minimal level of protection. ILO (2013) also reports that unorganized workplaces may pose potential hazards and harm, and also threaten the health of employees. This could consequently reduce employee income and will certainly reduce the productivity of the company (ILO, 2013). Previous studies have shown the importance of measuring conditions in the working environment as a basis for ergonomic interventions and workplace improvements to ensure worker safety and health (Siswanto et al., 2017; Iridiastadi et al., 2019).Cibaduyut, Bandung in Indonesia is a provincial sub-region that contains industrial complexes and is home to a large number of home-based footwear manufacturers. In the region, footwear companies have been controlled by families for generations. Many employees are found to be in the low-age and low-education categories, with related factors reported to affect awareness of work safety and hazards in the workplace (Markkanen, 2004). Accidents occur as a result of the interaction of several sequential events within a system. PATRIS was developed by the ILO to enhance safety in the informal SMME sector in third world countries. PATRIS training for the informal footwear industry has already being implemented in Indonesia in 2002 (ILO, 2003). In 2003, ILO Indonesia required that home-based manufacturers in Cibaduyut must comply with PATRIS; however, these practices have not been widely implemented due to the lack of participation from the employees and owners of existing home-based facilities. In 1999, ILO-IPEC conducted a study of 456 of the 1,132 shoe workshops in the Cibaduyut area, with the focus on work-related hazards (the continuing existence of poor ventilation), chemical handling practices, and fire prevention (ILO, 2003). With regards to work safety, poor ergonomic activities and standard operating procedures for the use of machines or tools were threatening the safety of the operators (employees). The set of problems described above poses a challenge for the development of the informal industrial sector, especially in relation to the process of maintaining the quality and frequency of production and ensuring the safety of the work environment.The main cause of accidents is the presence of potential hazards. In other words, accidents are not only caused by the unsafe behavior of humans, but also by mistakes made by decision-makers, with the consequence that potential accidents are delayed until triggered by human error. Participatory ergonomics is one of the research tools used in this study to analyse safety and work environment hazards. This can provide a participative solution to employees and owners to improve various aspects of the problem. Moreover, the focus is to ensure that the footwear production runs efficiently, economic rotation activities remain stable, and investment increases in the future. The analytical part of the study uses the participatory ergonomics approach to aspects ranging from the identification of safety

problems, to suggestions made to the company. Participatory ergonomics involves the active involvement of employees in implementing ergonomic knowledge and procedures in the workplace, which is supported by managers and supervisors. Seim and Broberg (2010) define participatory ergonomics as human involvement in the planning and controlling of most work activities, with sufficient power and knowledge to influence the process, resulting in achievement of the desired goal of an increased sense of responsibility for industrial or organizational activities, and of the goal of improved institutional productivity. Workplace hazards have been evaluated by the ILO-PATRIS checklist, used as a tool to improve working conditions in the informal shoe workshop sector (ILO, 2003). The checklist focuses on workplace hazards, preventive measures and day-to-day management practices relevant to informal shoe workshops. The safety climate in the such workshops is ensured by the shared perceptions of members of the social unit of safety-related policies, procedures and practices within the organization. This climate provides a framework for guiding workers' safety behaviour so that they will build perceptions and expectations regarding the impact of such behaviour (Dov, 2008). NOSACQ-50 is used to measure the safety climate developed by safety researchers based on organizational climate theory and safety, psychological theory, previous empirical research, and empirical results obtained through international studies and development processes (Kines et al., 2011). It consists of 50 statements divided into seven dimensions. In addition, EPPEQ has been used to measure the ergonomics of participation in workshops to identify program areas that need to be improved (Matthews et al., 2011). While PATRIS has been applied widely, the safety climate is rarely checked, even though measurement of it is needed as a first step to achieve the participatory ergonomics, especially in SMMEs. NOSACQ-50 is currently widely used to measure the safety climate in industry. PATRIS is used to measure the eligibility of safety on the facilities and systems, while NOSACQ-50 is used to measure the perception of the safety climate amongst workers. Implementation of participatory ergonomics is enriched by input from the NOSACQ-50 safety climate. At last, participatory ergonomic activity is measured to understand its performance and can thus improve an organization’s safety level. This paper aims to propose an increased safety environment in the informal footwear industry by sequencing measurement by PATRIS (risk assessment), NOSACQ-50 (safety climate), and EPPEQ (participatory ergonomics).

Nama Dr. Paulus Sukapto, Ir., MBA.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Industri 1

Penulis UNPAR Dr. Johanna Renny Octavia Hariandja, S.T., M.Sc.,; Paulina Kus Ariningsih, S.T., M.Sc.; Prof. Sani Susanto, Ir., M.T., Ph.D.

38 A practical approach to revenue management in passenger train services: A case study of the Indonesian railways Argo Parahyangan 19 Jurnal Edisi Journal of Rail Transport Planning & Doi://doi.org/10.1016/j.jrtp Management m.2019.100161

Abstrak

We proposed a practical approach to incorporating demand function in pricing optimization and its corresponding capacity allocation problem. Based on the willingness-to-pay approach, demand function was estimated from choice-based conjoint (CBC) data using a combination of hierarchical Bayes estimation, randomized first choice simulation, and cubic spline interpolation. The approach was implemented in the largest intercity passenger train service in Indonesia, assuming two customer segments and four fare classes. Solution to the mixed-integer nonlinear pricing optimization problem was obtained using enumeration. Subsequently, the expected marginal seat revenue heuristic was used in the seat inventory allocation problem. Nama Fransiscus Rian Pratikto, S.T., M.T.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Industri 1

Examining the Role of Usability, Compatibility and Social Influence in Mobile Banking Adoption in Indonesia 20 Jurnal Edisi International Journal of Technology Vol. 10; No. 02 (2019)

Abstrak

Adaptation to the internet and advances in mobile technology has become key to the survival of industries, including the banking industry. One of the latest electronic banking channels is mobile banking. While mobile banking offers various advantages, many banks in Indonesia are facing the problem of low adoption. This paper reports on the findings of our research project, which examines mobile banking adoption behavior in Indonesia from an interaction perspective. Specifically, the paper examines the role of usability, compatibility and social influence in explaining people's intention to continue using mobile banking in Indonesia. Using an interaction perspective framework, a research model is proposed. Ten hypotheses are suggested, examining six constructs: satisfaction, perceived usefulness, perceived ease of use, perceived learnability, compatibility and social influence. From a theoretical perspective, this paper is the first to combine usability, compatibility and social influence in a mobile banking adoption study. Data from 319 valid respondents

were used to test the proposed model using partial least squares structural equation modeling. The results show that all the hypotheses are supported, and it was found that people's intention to continue using mobile banking is significantly affected by satisfaction, compatibility, perceived usefulness, perceived learnability and social influence. Nama Dr. Hotna Marina R. Sitorus

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Industri 1

Capabilities in Managing Offshore IT Outsourcing Challenges and The Influence on Outsourcing Success from The IT Vendor 21 Perpspective Jurnal Edisi International Journal of Technology Vol. 10; No. 04 (2019)

Abstrak

An IT vendor requires excellent capabilities to achieve success in offshore IT (information technology) outsourcing. This study aims to contribute to IT outsourcing research by identifying IT vendor capabilities from the perspective of offshore IT outsourcing challenges. A model is proposed that explains the relationship between capabilities in managing offshore IT outsourcing challenges (i.e., interaction capability, management capability, and capability to managing the distance involved) and the impact of these capabilities on outsourcing success. The proposed model is empirically tested by Partial Least Squares – Structural Equation Modelling (PLS- SEM) for validation, with 64 samples obtained from a survey of Indonesian IT vendors with experience in conducting offshore IT outsourcing projects. The results indicate that interaction capability consisting of communication and coordination has a positive impact on outsourcing success, and that this capability is in turn influenced by management capability. This includes management support, talent management and the ability to manage distances, in addition to cultural understanding and managing the temporal distance. Nama Dr. Yogi Yusuf Wibisono, S.T., M.T.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Industri 1

40 Managing differences, interaction, and partnership quality in global inter-firm relationships: An empirical analysis on offshore IT outsourcing 22 Jurnal Edisi International Journal of Managing Vol. 12; No. 03 (2019) Projects in Business

Abstrak

Purpose: The purpose of this paper is to develop and to empirically test a model that explains how managing differences between an information technology (IT) provider and an overseas client influences partnership quality and ultimately affects the continuity of the relationship.

Nama Dr. Yogi Yusuf Wibisono, S.T., M.T.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Industri 1

Activated carbon from citric acid catalyzed hydrothermal carbonization and chemical activation of salacca peel as 23 potential electrode for lithium ion capacitor's cathode Jurnal Edisi IONICS Vol.25; No. 8 (2019)

Abstrak

Activated carbon (AC) has been utilized for various applications including as an electrode for supercapacitor, i.e., electric double-layer capacitor (EDLC) as well as hybrid capacitor such as lithium ion capacitor. In this research, salacca peel was used as a raw material for AC. It was chosen among other biomass wastes because it is abundant and is still considered as a waste. The hydrothermal carbonization was conducted at 5 MPa, temperature of 200–250 °C, and 5 h in subcritical water, which is a green dehydrating agent. The effect of parameters (temperature and addition of citric acid as a catalyst) on the hydrochar and AC product was investigated. The hydrochar from hydrothermal carbonization was activated by chemical activation using potassium hydroxide (KOH) as an activated agent to enhance the surface area and porosity. The morphology of both hydrochar and AC was measured by scanning electron microscopy (SEM), its chemical transformation was measured by Fourier transform infrared spectroscopy (FTIR) while the surface area and pore size distribution were measured by nitrogen adsorption at 77.35 K. The electrochemical performance of activated carbon from salacca peel as well as commercial activated carbon using a coin cell in a Li half-cell system was evaluated by CV, GCD, and EIS. The results show that the presence of citric acid contributes to higher specific

capacitance in the rate performance test of LIC at different current density as well as in long rate stability test. Nama Ratna Frida Susanti, Ph.D.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Kimia 1

Penulis UNPAR Arenst Andreas, S.T., S.Si, M.Sc., Ph.D.; Hans Kristianto, S.T., M.T.

Optimal codesign of industrial networked control systems with state-dependent correlated fading channels 24 Jurnal Edisi International Journal of Robust and Vol. 29; No.13 (2019) Nonlinear Control

Abstrak

This paper examines a codesign problem in industrial networked control systems (NCS) whereby physical systems are controlled over wireless fading channels. The considered wireless channels are assumed to be stochastically dependent on the physical states of moving machineries in the industrial working space. In this paper, the moving machineries are modeled as Markov decision processes whereas the characteristics of the correlated fading channels are modeled as a binary random process whose probability measure depends on both the physical states of moving machineries and the transmission power of communication channels. Under such a state‐dependent fading channel model, sufficient conditions to ensure the stochastic safety of the NCS are first derived. Using the derived safety conditions, a codesign problem is then formulated as a constrained joint optimization problem that seeks for optimal control and transmission power policies which simultaneously minimize an infinite time cost on both communication resource and control effort. This paper shows that such optimal policies can be obtained in a computationally efficient manner using convex programming methods. Simulation results of an autonomous forklift truck and a networked DC motor system are presented to illustrate the advantage and efficacy of the proposed codesign framework for industrial NCS. Nama Tua Agustinus Tamba, Ph.D.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Elektro Konsentrasi 2 Mekatronika

42 An Unscented Kalman Filter-based Synchronization Control Approach for Communication-Based Train Control Systems 25 Jurnal Edisi International Journal on Advanced Science, Vol. 9; No. 6 (2019) Engineering and Information Technology

Abstrak

Meningkatnya jumlah penduduk, terutama di kota-kota besar dunia menyebabkan kebutuhan akan transportasi juga meningkat. Salah satu moda transportasi yang banyak dikembangkan untuk menjawab kebutuhan tersebut adalah kereta api. Communication-Based Train Control (CBTC) adalah salah satu pengembangan dari sistem pengoperasian kereta api yang menggunakan sistem blok bergerak. Pada sistem blok bergerak, jarak aman antar kereta api tidak lagi ditentukan oleh blok-blok rel dengan panjang yang tetap, melainkan berdasarkan kecepatan serta posisi dari kereta api yang beroperasi pada suatu rel. Dengan demikian jarak aman antar kereta api dapat diminimalkan. Pada penelitian ini, digunakan miniatur kereta api untuk merancang sistem CBTC. Sensor yang digunakan adalah enkoder, Indoor Positioning System (IPS), Radio Frequency Identification (RFID). Data posisi dan kecepatan dari ketiga sensor tersebut diolah menggunakan algoritma sensor fusion berbasis Unscented Kalman Filter (UKF) untuk mendapatkan data posisi kereta api yang lebih akurat. Estimasi posisi kemudian digunakan untuk merancang algoritma kontrol sinkronisasi pada blok bergerak. Dari penelitian ini diketahui bahwa algoritma UKF dapat menghasilkan estimasi posisi kereta api dengan baik sehingga algoritma kontrol sinkronisasi pada blok bergerak juga dapat diterapkan dengan baik. Nama Tua Agustinus Tamba, Ph.D.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Elektro Konsentrasi Mekatronika 4

Conflicting quality attributes, distribution channel structure and product line length in quality-based segmentation 26 Jurnal Edisi IMA Journal of Management Mathematics Vol. 20; No. 01 (2019)

Abstrak

This article investigates the quality-based segmentation problem in which products offered in the product line are characterized by two conflicting quality attributes. We consider a vertically differentiated market in which consumer quality valuations are probabilistically and continuously distributed. We compare the results in such a setting with the most commonly used setting in the existing literature in which the products only have a single quality attribute and the market segments are represented by deterministic and discrete quality valuations. Our analysis includes two choices that are relevant when designing a product line. The first choice

concerns the product line length, which is represented by the choice between the single-product strategy and the two-product strategy. The second choice concerns the distribution channel structure. The manufacturer can sell the products directly to end consumers in a centralized channel or through a retailer in a decentralized channel. We analyse and compare a number of performance measures such as profitability, consumer welfare and cannibalization intensity. Our results show that in case of a product with two conflicting attributes, the way in which the product line length and the distribution channel structure affect the performance measures mentioned above differs from the effects found when a product has a single quality attribute only. We also show that the continuously distributed quality valuations make the decision on whether to capture the market fully or partially highly relevant and important when making the quality-based segmentation decisions. Nama Dr. J. Dharma Lesmono

Fakultas Jurusan Penulis Ke Teknologi Informasi dan Sains Matematika 2

On the evaluation of commonality strategy in the product line design: The effect of valuation change and distribution channel 27 structure Jurnal Edisi Omega Vol. 83; No. 0 (2019)

Abstrak

This paper investigates a manufacturer's optimal decisions in relation to the adoption of the commonality strategy in a decentralized channel as opposed to a centralized channel. Our model, through valuation premium and discount, captures the possible changes in the perceived quality made by customers as a result of the use of common design in the high-quality and low-quality products. We show that commonality always help reduce the extent of quality distortion encountered by the low-valuation segment, regardless of the channel structure. We also show that the adoption of commonality strategy in a decentralized channel is able to reduce channel efficiency loss, which may lead to improvements in the channel profits even when there is no cost saving associated with the use of common components. The valuation premium and discount are influential on several important measure including optimal quality levels, channel profits, and consumer surplus. Furthermore, we point out an important issue on the coordination between the manufacturer and the retailer that must be addressed if the commonality strategy is to be implemented in a decentralized channel. Nama Dr. J. Dharma Lesmono

Fakultas Jurusan Penulis Ke Teknologi Informasi dan Sains Matematika 2

Scalar phenomenology in type-II seesaw model

28 Jurnal Edisi Journal of High Energy Physics Vol. 1908; Vol. 24 (2019)

Abstrak

In this work we study the viable parameter space of the scalar sector in the type-II seesaw model. In identifying the allowed parameter space, we employ constraints from low energy precision measurements, theoretical considerations and the 125- GeV Higgs data. These tools prove effective in constraining the model parameter space. Moreover, the triplet also offers a rich collider phenomenology from having additional scalars that have unique collider signatures. We find that direct collider searches for these scalars can further probe various parts of the viable parameter space. These parts can be parametrized by the electroweak scalar triplet vacuum expectation value, the mass splitting of the singly- and doubly-charged scalars, and the doubly-charged Higgs mass. We find that different regions of the viable parameter space give rise to different collider signatures, such as the same-sign dilepton, the same-sign W and the multilepton signatures. By investigating various LEP and LHC measurements, we derive the most updated constraints over the whole range of parameter space of the type-II seesaw model.

Nama Reinard Primulando, Ph.D.

Fakultas Jurusan Penulis Ke Teknologi Informasi dan Sains Fisika 1

Penulis UNPAR Reinard Primulando, Ph.D.

JURNAL INTERNASIONAL TIDAK TERINDEKS Q1 DAN Q2

Accounting Ethics Managing Income Education: What And Creativity by Young How To Teach? Entrepreneurs in 1 Bandung Jurnal Edisi 3 Kajian Vol 21; Jurnal Edisi Akuntansi No. 02 International Vol 9; (2019) Review of No. 02 Management (2019) Nama Amelia Limijaya, SE., M.Acc.Fin. and Marketing

Penulis Dr. Elizabeth Tiur Fakultas Jurusan Nama Ke Manurung, M.Si., Ak.

Ekonomi Akuntansi 1 Penulis Fakultas Jurusan Ke Ekonomi Akuntansi 1 Fraud and Corruption Trigger Model Based on Penulis Dr. Elvy Maria Manurung, Perception of High UNPAR S.E., Ak., M.T. School Students: a Preliminary Study A New Approach for 2 Jurnal Edisi Bank Credit Assessment Review of Vol 08; by Small, Medium, Integrative No. 03 Enterprises : Evidence Business & (2019) from West Java - Economics Indonesia. Research 4 Jurnal Edisi Prof. Dr. Hamfri Academy of Vol.23; Nama Djajadikerta, Drs., Ak. , Accounting No. 3 M.M. and Financial (2019) studies Journal Penulis Fakultas Jurusan Ke (AAFSJ) Ekonomi Akuntansi 1 Nama Dr. Elizabeth Tiur Penulis Dr. Sylvia Fettry Elvira Manurung, M.Si., Ak. UNPAR Maratno, S.E., S.H., M.Si., Penulis Fakultas Jurusan Ak.; Damajanti Ke Tanumihardja, S.E., M.Ak. Ekonomi Akuntansi 1

Penulis Dr. Elvy Maria Manurung, UNPAR S.E., Ak., M.T.

Success in Six’ Model to The Similar Versus Increase Efficiency and Divergent Effects of Green Productivity Pride and Happines on The Effectiveness of Jurnal Edisi 7 Loyalty Programs International Vol. 3, 5 Journal of No. 02 Jurnal Edisi Service (2018) Journal of Vol. 99; Management Business No. 12 and Research (2019) Sustainability Nama Dr. Istiharini (IJSMS) Penulis Paulina Permatasari, Fakultas Jurusan Nama Ke S.E. M.Ak. Ekonomi Manajemen 5 Penulis Fakultas Jurusan Ke Ekonomi Akuntansi 3 The Impact of Macroeconomic Factors

on Firms Profitability (Evidence From Fast A Model of Service Moving Consumer Good Quality to Improve Firms Listed on International Airports 8 Indonesian Stock Ranking Stars Exchange) 6 Jurnal Edisi Jurnal Edisi Academy of Vol. 23; Academy of Vol: 23 No. 04 Accounting and No. 01 Marketing (2019) Studies Journal (2019) Financial Studies Journal Nama Dr. Raden Roro Ida Nuraida, S.E., M.M. Nama Vera Intanie Dewi, S.E., M.M. Penulis Fakultas Jurusan Penulis Ke Fakultas Jurusan Ke Ekonomi Manajemen 1 Ekonomi Manajemen 1 Penulis Lilian Danil, S.E., M.M. UNPAR Penulis Catharina Tan Lian Soei, UNPAR Dra., M.M.; Felisca Oriana Surjoko, S.E., MSM.

The Adaptability of The Diaspora Project on Company's Strategy in Education Sector: Managing Its Life Cycle Cultivating Positive Stages Perception of Indonesia Through International 9 Jurnal Edisi 11 Education Pertanika Vol. 26 Journal of No. 12 Jurnal Edisi Social Sciences (2019) Udayana Vol. 3; & Humanities Journal of Law No. 02 (JSSH) and Culture (2019)

Nama Dr. Judith Felicia Nama Ratih Indraswari, S.IP., Pattiwael, Dra., M.T. MA.

Penulis Penulis Fakultas Jurusan Fakultas Jurusan Ke Ke Ekonomi Manajemen 1 Ilmu Ilmu 1 Sosial Hubungan Penulis Vera Intanie Dewi, S.E., dan Ilmu Internasional UNPAR M.M. Politik

Managing the Islamic State and the Internationalization Social Media in Indonesia Strategy of Private University Jurnal Edisi 12 Journal of Vol. 9; Jurnal Edisi 10 Content, No. 05 International Vol. 8; Community& (2019) No. 08 Journal of Communication Information and (2018) Education Nama Sukawarsini Djelantik, Technology Dra., M.I.S., Ph.D. Penulis Nama Ratih Indraswari, S.IP., Fakultas Jurusan MA. Ke Ilmu Ilmu Hubungan 1 Penulis Fakultas Jurusan Sosial Internasional Ke dan Ilmu Ilmu Ilmu Hubungan 1 Politik Sosial Internasional dan Ilmu Politik

The Threat to Indonesia Democratization in From the Islamic State of Indonesia: Strong State Iraq and Syria (IS/ISIS): A and Vibrant Civil Society Human Security Jurnal Edisi Perspective 15 13 Asian Affairs: DOI: Jurnal Edisi An American 10.1080 Journal of Vol. 6; Review Jurnal /009276 78.2019 International No. 05 A (2018) .170128 Relations and 4 Diplomacy Nama Sylvia Yazid, S.IP., Nama Sukawarsini Djelantik, MPPM, Ph.D. Dra., M.I.S., Ph.D. Penulis Penulis Fakultas Jurusan Fakultas Jurusan Ke Ke Ilmu Sosial Ilmu 1 Ilmu Sosial Ilmu 1 dan Ilmu Hubungan dan Ilmu Hubungan Politik Internasional Politik Internasional Penulis Dr. Aknolt Kristian UNPAR Pakpahan, S.IP., M.A.

The Indonesian Women The entrepreneurial Migrant Workers, ecosystem to foster Redefinition and competitiveness Termination of Sending among enterprises: a Them Abroad national level analysis 14 16 Jurnal Edisi Jurnal Edisi Journal of Vol. 07; Int. J. Vol. No. 04 International Business 23; No. (2019) Relations and and 02 (2019) Diplomacy Globalisation Sukawarsini Djelantik, Nama Nama Gandhi Pawitan, Ir., Dra., M.I.S., Ph.D. M.Sc., Ph.D.

Penulis Penulis Fakultas Jurusan Fakultas Jurusan Ke Ke Ilmu Sosial Ilmu 1 Ilmu Ilmu 1 dan Ilmu Hubungan Sosial Administrasi Politik Internasional dan Ilmu Publik Politik Penulis Catharina Badra UNPAR Nawangpalupi, Ph.D.; Dr. Maria Widyarini, S.E., M.T.

Preliminary Survey on Barriers to the Policy Compliance of The implementation of green Street Vendors’ construction: a case Regulations In Bandung study in Bandung, City, Indonesia Indonesia 17 Jurnal Edisi 19 Jurnal Edisi Journal of Vol. International Vol. Youth & Public 01; No. Journal of 10; No. Governance 02 Integrated 08 (2019) (2018) Engineering Kristian Widya (IJIE) Nama Wicaksono, S.Sos. Adrian Firdaus , S.T., M.Si. Nama M.Sc. Penulis Fakultas Jurusan Penulis Ke Fakultas Jurusan Ke Ilmu Ilmu 1 Teknik Teknik Sipil 1 Sosial Administrasi dan Ilmu Publik Penulis Theresita Herni Setiawan, Politik UNPAR Ir., M.T.

ITS Design Priority at Application of Traffic Large Bus Terminal in Calming Devices in Indonesia in Supporting Developing Countries: Sustainable Learning Lesson from Transportation 18 20 Bangladesh Jurnal Edisi Jurnal Edisi Advances in Vol. 186; Journal of Vol. 08; No. 01 Engineering Transportation No. 02 (2019) Research Technologies (2018) Anastasia Caroline Nama Nama Tri Basuki Joewono, Sutandi, Ir., M.T., Ph.D. Ph.D.

Jurusa Penulis Penulis Fakultas Fakultas Jurusan n Ke Ke Teknik Teknik 1 Teknik Teknik 2 Sipil Sipil Penulis Prof. Wimpy Santosa, Ir., UNPAR M.Eng., MSCE., Ph.D.; Dr. Felix Hidayat, S.T., M.T.

The Study of Situational Penulis Altho Sagara, S.T., M.T. Leadership Style on an UNPAR Indonesian Construction Risk Rating of Precast Company Concrete Pile Fabrication 21 Jurnal Edisi Process: A Case Study in Bandung, Indonesia Malaysian Vol. Journal Of Civil 31; No. 23 Jurnal Edisi Engineering 01 (2019) Applied Vol.12; Science and No. 02 (2019) Nama Theresita Herni Engineering Setiawan, Ir., M.T. Progress Penulis Fakultas Jurusan Adrian Firdaus , S.T., Ke Nama M.Sc. Teknik Teknik Sipil 1 Penulis Fakultas Jurusan Penulis Adrian Firdaus , S.T., Ke UNPAR M.Sc. Teknik Teknik Sipil 1

Penulis Yohanes Lim Dwi Adianto, The Effects of Design UNPAR Ir., M.T. Change on The Completion Time of Universitas Multimedia Location, Patteren of Nusantara Tower 3 Arrangement, and Physical Element of Open 22 Construction Project Space in the Ifolia Cluster, Jurnal Edisi 24 Bekasi Applied Vol.12; Jurnal Edisi Science and No. 02 Engineering (2019) Review of Vol. 11 No. Progress European 03 (2019) Studies Nama Theresita Herni Setiawan, Ir., M.T. Nama Dr. Hartanto Budiyuwono, Ir., M.T. Penulis Fakultas Jurusan Penulis Ke Fakultas Jurusan Ke Teknik Teknik Sipil 1 Teknik Arsitektur 1

Identification of Spatial Reconstruction of Pattern in Pakungwati as Architectonic a Reflection of Transformation of the Architectural Grand Mosque of Sang Transformation between Ciptarasa Cirebon, from Hindu-Buddhist and the Pyramidal Tajug to the Hipped Limasan Roof 25 Islamic Palace in Jawa 27 Jurnal Edisi Jurnal Edisi Journal of Vol.9; Journal of Vol. 09; No. 07 Applied No. 06 Applied (2019) Environmental (2019) Environmental and Biological and Biological Sciences Sciences Dr. Rahadhian Prajudi Nama Dr. Rahadhian Prajudi Nama Herwindo, S.T, M.T. Herwindo, S.T, M.T.

Penulis Penulis Fakultas Jurusan Fakultas Jurusan Ke Ke Teknik Arsitektur 1 Teknik Arsitektur 1

The Traditional Settlement Architecture The Strong Architectonic of the Bataknese Toba Elements of Traditional Tribe and Clan Kinship in Vernacular Architecture in the Village of Indonesia Hutaginjang North 26 Jurnal Edisi sumatra, Indonesia Journal of Vol. 09; 28 Jurnal Edisi Basic and No. 03 Journal of the Vol. Applied (2019) International 06; No. Scientific Society for the 02 Research (2019) Study of Vernacular Nama Dr. Rahadhian Prajudi Herwindo, S.T, M.T. Settlements (ISVS-e Penulis Fakultas Jurusan Journal) Ke Teknik Arsitektur 1 Nama Dr. Rumiati Rosaline Tobing, Ir., M.T.

Penulis Fakultas Jurusan Ke

Teknik Arsitektur 1

Lessons from Joglo’s The Relationship Between Tectonic Adaptability for Architectural Form And Sustainable Future Meaning In Santa Theresia Catholic Church, Jakarta, 29 Jurnal Edisi Indonesia Creative Vol. 06; 31 Space No. 02 Jurnal Edisi Journal (2019) International Vol. 10; Journal of Civil No. 02 Yenny Gunawan, S.T., Nama Engineering (2019) M.A. and Technology Penulis (IJCIET) Fakultas Jurusan Ke Dr. Purnama Salura, Teknik Arsitektur 1 Nama Ir., M.T., MBA

Penulis Fakultas Jurusan Ke Teknik Arsitektur 1 Interpretation of the Meaning of Mosque Penulis Dr. Bachtiar Fauzy, Ir., Architecture : A Case UNPAR M.T. Study Mosque 99 Cahaya

in Lampung, Sumatera

30 Island, Indonesia Anatomy of Architecture Jurnal Edisi Based on the Creation of International Vol. 07; Space for Activity Journal of No 02 Engineering & (2018) 32 Jurnal Edisi Technology International Vol. 07 Journal of No. 02.14 Dr. Purnama Salura, Ir., Nama Engineering & (2018) M.T., MBA Technology Penulis Fakultas Jurusan Ke Nama Dr. Purnama Salura, Ir., M.T., MBA Teknik Arsitektur 1 Penulis Fakultas Jurusan Ke

Teknik Arsitektur 1

Sineger Tengah and Misplaced Eclecticism in Kaca-kaca as The Deep- the Architecture Of Structure of Sundanese Constitutional Court Architecture in Pasundan Building in Jakarta- Land, West Java, Indonesia 33 Indonesia 35 Jurnal Edisi Jurnal Edisi Journal of Vol. International Vol 7 Advanced 10; No. Journal of No Research in 02 (2018) Engineering & 2.14 Dynamical and (2018) Technology Control Systems Nama Dr. Purnama Salura, Ir., M.T., MBA Nama Dr. Purnama Salura, Ir., M.T., MBA Penulis Fakultas Jurusan Ke Penulis Fakultas Jurusan Teknik Arsitektur 1 Ke Teknik Arsitektur 1

Spectrum of Meaning in Interpreting Architectural The Architecture of Expression Of House Of Catholic Church Case Representative Building Study: Salib Suci Church Case Study: East Java in Jakarta, and the Provincial House of Church of Bunda Representative Building Pemersatu Monastery in In Surabaya, East Java, 34 Semarang, Central Java, 36 Indonesia Indonesia Jurnal Edisi Jurnal Edisi Journal of Vol. International Vol 7 Advanced 10; No. Journal of No Research in 02 (2018) Engineering & 2.14 Dynamical and (2018) Technology Control Systems Nama Dr. Purnama Salura, Ir., M.T., MBA Nama Dr. Purnama Salura, Ir., M.T., MBA Penulis Fakultas Jurusan Ke Penulis Fakultas Jurusan Teknik Arsitektur 1 Ke Teknik Arsitektur 1

The philosophy of A Novel Approach to Road architectural ordering Accident Mitigation principles through Determination of Time to Rest on Jurnal Edisi 37 Monotonous Roads International Vol. Journal of 07; No. 39 Jurnal Edisi Engineering & 02 International Vol. 20; (2018) Technology Journal of No. 04 Simulation (2019) Dr. Purnama Salura, Ir., Nama Systems, M.T., MBA Science and Penulis Technology Fakultas Jurusan Ke Daniel Siswanto, S.T., Teknik Arsitektur 1 Nama M.T.

Penulis Fakultas Jurusan Ke Network utility Teknologi Teknik 1 maximisation through Industri Industri particle swarm Penulis Prof. Sani Susanto, Ir., optimisation UNPAR M.T., Ph.D. Jurnal Edisi 38 International Vol. Application Of The Reba Journal of 10; Method To Osh Systems Systems, No. 01 To Increase Work (2019) Control and Productivity (A Case Communication Study At Pt. Eksonindo s MPI, Bandung, Indonesia)

Tua Agustinus Tamba, Jurnal Edisi Nama 40 Ph.D. International Vol. 10; No. Penuli Journal of Fakultas Jurusan 04 s Ke Civil (2019) Teknologi Teknik 1 Engineering Industri Elektro and Konsentrasi Mekatronika Technology (IJCIET)

Nama Dr. Paulus Sukapto, Ir., MBA. Penulis Fakultas Jurusan Ke

Teknologi Teknik 1 Industri Industri

Activated Carbon Fixed- Removal of Congo red Bed Adsorber Design for aqueous solution using Treating Chromium Leucaena leucocephala Hexavalent Wastewater seed’s extract as natural 41 coagulant Jurnal Edisi 43 Makara Vol. 22; Jurnal Edisi Journal of No. 03 Applied Vol. 09; Technology (2018) Water No. 88 Science (2019) Nama Tedi Hudaya, S.T., M.Eng.Sc., Ph.D. Nama Hans Kristianto, S.T., M.T. Penulis Fakultas Jurusan Ke Penulis Fakultas Jurusan Teknologi Teknik 1 Ke Industri Kimia Teknologi Teknik 1 Industri Kimia Hard carbons derived Penulis Dr. Asaf Kleopas Sugih, UNPAR Ir. from waste tea bag powder as anodes for sodium ion battery 42 Adsorption of Ni(II) Ion Jurnal Edisi onto Calcined Eggshells: A Study of Equilibrium Materials Vol. 34, No. 09 Adsorption Isotherm Technology 44 (2019) Jurnal Edisi Nama Arenst Andreas, S.T., Indonesian Vol. 19; S.Si, M.Sc., Ph.D. Journal of No. 01 Chemistry (2019) Penulis Fakultas Jurusan Ke Nama Hans Kristianto, S.T., Teknologi Teknik 1 M.T. Industri Kimia Penulis Fakultas Jurusan Ke Teknologi Teknik 1 Industri Kimia Penulis Arenst Andreas, S.T., UNPAR S.Si, M.Sc., Ph.D.

Hydrogels Based on Incremental Parallel Dynamic Covalent and Classifier For Big Data Non Covalent Bonds: A With Case Study: Naïve 45 Chemistry Perspective Bayes Using Mapreduce Patterns Jurnal Edisi 47 Gels Vol. 04; No. Jurnal Edisi 01 (2018) Journal of Vol. 97; No. Dr. Henky Muljana, S.T., Theoretical and Nama Applied 11 M.Eng. (2019) Information Penulis Fakultas Jurusan Technology Ke Teknologi Teknik 2 Nama Dr. Veronica Sri Industri Kimia Moertini, Ir., M.T. Penulis Fakultas Jurusan Ke Forex Trading Robot with Teknologi Teknik 1 Technical and Informasi Informatika Fundamental Analysis dan Sains 46 Jurnal Edisi Journal of Vol. 13; An Efficient Technique No. 09 Computers For Cluster Number (2018) (JCP) Prediction In Graph Clustering Using Nullity Nama Luciana Abednego, S.Kom., M.T. Of Laplacian Matrix 48 Penulis Jurnal Edisi Fakultas Jurusan Ke Journal of Vol. Teknologi Teknik 1 Theoretical and 97; No. Informasi dan Informatika Applied 7 (2019) Sains Information Penulis Dr. rer. nat Cecilia Esti Technology UNPAR Nugraheni, S.T., M.T.; Dr. Veronica Sri Irvan Rinaldy Nama Moertini, Ir., M.T.

Penulis Fakultas Jurusan Ke Teknologi Teknik 4 Informasi Informatika dan Sains

The mathematical Pricing ‘partial-average’ modelling of the SIR-SI Asian options with the contagion model of binomial method dengue disease which considers the blood type Jurnal Edisi 50 O factor human International Vol. compartment : A 49 Journal of 10. No. theoretical simulation Banking, 01 (2019) Jurnal Edisi Accounting, and Finance Journal of Vol. Statistics and 22; No. Dr. Erwinna Chendra, 03 Nama Management S.Si., M.Si. (2019) Systems Penulis Fakultas Jurusan Nama Farah Kristiani, S.Si., Ke M.Si. Teknologi Matematika 1 Informasi Penulis Fakultas Jurusan dan Sains Ke Teknologi Matematika 1 Informasi dan Sains

PROCEEDING TERINDEKS SCOPUS

ICT implementation of Case Record of a Strut- bus public transportation free Excavation with towards green Buttress Walls in Soft engineering in Indonesia Soil

1 Jurnal Edisi Jurnal Edisi 3 IOP Conference Vol. Proceedings of 2018 Series: 615 the 2nd Materials (2019) International Science and Symposium on Engineering Asia Urban GeoEngineering Nama Anastasia Caroline Sutandi, Ir., M.T., Ph.D. Nama Aswin Lim, Ph.D.

Penulis Penulis Fakultas Jurusan Fakultas Jurusan Ke Ke Teknik Teknik Sipil 1 Teknik Teknik Sipil 1

Penulis Dr. Yasmin Suriansyah, UNPAR Ir., MSP.; Dr. Yohanes Feasibility Study on Karyadi Kusliansjah, Ir., Structural Health M.T.. IAI. Monitoring Systems Using Fiber-Optic Stages of ICT Sensors (FOS) Implementation on Buses Technology for and at Major Bus Terminal Transportation in Indonesia towards Infrastructures in 4 Sustainable Indonesia 2 Transportation Jurnal Edisi Jurnal Edisi IOP MATEC Web Vol. 276 Conference of No 1 Series: Conferences (2019) Materials Science and Nama Anastasia Caroline Engineering Sutandi, Ir., M.T., Ph.D. Nama Budijanto Widjaja, S.T., Penulis Fakultas Jurusan M.T., Ph.D. Ke Penulis Teknik Teknik 1 Fakultas Jurusan Sipil Ke Teknik Teknik Sipil 3

Effect of various Application of Self Mass temperatures to liquid Damper in multi-story limit, plastic limit, and concrete building plasticity index of clays 7 Jurnal Edisi 5 Jurnal Edisi MATEC Web Vol. 258; IOP Conference Vol of No. 5006 Series: 508, Conferences (2019) Materials conf 1 (2019) Science and Nama Dr.-Ing. Dina Rubiana Engineering Widarda

Budijanto Widjaja, S.T., Penulis Nama Fakultas Jurusan M.T., Ph.D. Ke Teknik Teknik 1 Penulis Fakultas Jurusan Sipil Ke

Teknik Teknik Sipil 1

Effect of NaCl and CaCl2 Modal parameters solutions on the liquid identification of light rail limit, plastic limit, and bridges plasticity index of clay Jurnal Edisi 8 6 Jurnal Edisi IOP Conference Vol 669 (2019) IOP Conference Vol Series: Series: 508, Materials Materials conf 1 Science and (2019) Science and Engineering Engineering Nama Dr.-Ing. Dina Rubiana Widarda Nama Budijanto Widjaja, S.T., M.T., Ph.D. Penulis Fakultas Jurusan Ke Penulis Fakultas Jurusan Ke Teknik Teknik Sipil Teknik Teknik Sipil 1

Behavior of wood beam Communication-efficient connection using staples optimal-based control of subjected to in-plane a quadrotor UAV by moment event-Triggered 9 Mechanism Jurnal Edisi MATEC Web Vol. 258; 11 Jurnal Edisi of No. 5008 Proceedings of 8593118 Conferences (2019) the 5th Asian (2018) Conference on Prof. Bambang Nama Defence Suryoatmono, Ph.D. Technology, Penulis ACDT 2018 Fakultas Jurusan Ke Tua Agustinus Tamba, Teknik Teknik 2 Nama Ph.D. Sipil Penulis Fakultas Jurusan Ke Numerical study of Teknologi T. Elektro 3 inelastic buckling Industri (Mekatronika) behavior of rectangular

steel plates with circular openings under shear Experimental Modeling 10 forces of a Quadrotor UAV Using an Indoor Local Jurnal Edisi Positioning System MATEC Web Vol. 258; of No. 5026 Jurnal Edisi Conferences (2019) 12 Proceeding - 2018 2018 5th Prof. Bambang Nama International Suryoatmono, Ph.D. Conference on Penulis Electric Fakultas Jurusan Ke Vehicular Teknik Teknik Technology Sipil Nama Tua Agustinus Tamba, Ph.D.

Penulis Fakultas Jurusan Ke Teknologi T. Elektro 3 Industri (Mekatronika)

Nonlinear Stability A Structural Output Analysis of Vehicle Side- Controllability Slip Dynamics using SOS Approach to Drug Programming Efficacy Prediction

Jurnal Edisi 15 Jurnal Edisi 13 2018 5th 2018 Proceedings Vol. 0 International of 12th Asian No. Conference on Control 8765157 (2019) Electric Conference, Vehicular ASCC 2019 Technology Nama Tua Agustinus Tamba, Nama Tua Agustinus Tamba, Ph.D. Ph.D. Penulis Fakultas Jurusan Penulis Ke Fakultas Jurusan Ke Teknologi T. Elektro 3 Teknologi T. Elektro 1 Industri (Mekatronika) Industri (Mekatronika)

Data-driven construction On Using Unscented of chemical reaction Kalman Filter Based Multi network graph using Sensors Fusion for Train constrained LASSO Localization Jurnal Edisi 14 Jurnal Edisi 16 Proceedings of 2019 Proceedings of 8765053 2019 6th 12th Asian (2019) International Control Conference on Conference, Instrumentation, ASCC 2019 Control, and Automation (ICA) Nama Tua Agustinus Tamba, Ph.D. Nama Tua Agustinus Tamba, Ph.D. Penulis Fakultas Jurusan Ke Penulis Fakultas Jurusan Teknologi T. Elektro 2 Ke Industri (Mekatronika) Teknologi T. Elektro 1 Industri (Mekatronika)

An actuator intrusion Energy-based modeling detection mechanism for and swing up control event-triggered moving synthesis of an inverted target defense control pendulum system

Jurnal Edisi Jurnal Edisi 17 Proceedings of 2019 Proceedings of 2019 19 the 6th Asian the 2019 Conference on International Defence Conference on Technology Mechatronics, 2019 Robotics, and Systems Tua Agustinus Tamba, Nama Engineering Ph.D. Tua Agustinus Tamba, Penulis Nama Fakultas Jurusan Ph.D. Ke Teknologi T. Elektro 1 Penulis Fakultas Jurusan Industri (Mekatronika) Ke Teknologi T. Elektro 2 Industri (Mekatronika) An input-to-state stable implementation of event- Penulis Dr. Ali Sadiyoko, S.T., UNPAR M.T. triggered CBTC

Jurnal Edisi On input-to-state stability Proceedings of 2019 of train platoon under 18 the 6th moving block signalling International Conference on Jurnal Edisi Electric Proceedings of 2019 20 Vehicular the 8th IFAC Technology Symposium on 2019 Mechatronic Systems Nama Tua Agustinus Tamba, Ph.D. (MECHATRONICS 2019) Penulis Fakultas Jurusan Ke Nama Tua Agustinus Tamba, Teknologi T. Elektro 1 Ph.D. Industri (Mekatronika) Penulis Fakultas Jurusan Ke Teknologi T. Elektro 1 Industri (Mekatronika)

Safety verification of a Acetylation of Xanthan train interlocking timed Gum in Densified CO2 automaton model 23 Jurnal Edisi Jurnal Edisi Materials vol. 05; Proceedings of 2019 Today No. 10 21 the 8th IFAC (2018) Symposium on Nama Dr. Henky Muljana, S.T., Mechatronic M.Eng. Systems Penulis (MECHATRONIC Fakultas Jurusan S 2019) Ke Teknologi Teknik 1 Nama Tua Agustinus Tamba, Industri Kimia Ph.D. Penulis Dr. Asaf Kleopas Sugih, Penuli UNPAR Ir. ; Anastasia Prima Fakultas Jurusan s Ke Kristijarti, S.Si., M.T. Teknolog T. Elektro 2 i Industri (Mekatronika) Effect of different types

of phosphorylating Microwave assisted reagent on the synthesis ZnCl2 activation of of modified tapioca salacca peel derived starch activated carbons as 24 Jurnal Edisi adsorbents for Cu(II) removal from aqueous IOP Conf. 673 Series: (2019) 22 solution Materials Jurnal Edisi Science and IOP Conference 620 Engineering Series (2019) Dr. Asaf Kleopas Sugih, Materials Nama Ir. Science and Engineering Penulis Fakultas Jurusan Ke Arenst Andreas, S.T., Nama Teknologi Teknik Kimia 1 S.Si, M.Sc., Ph.D. Industri Penulis Fakultas Jurusan Penulis Hans Kristianto, S.T., Ke UNPAR M.T., Susiana Prasetyo, Teknologi Teknik Kimia 1 S.T., M.T. Industri

Penulis Hans Kristianto, S.T., UNPAR M.T.

64 Preliminary Study on Tamarindus Indica Seeds Optimal replenishment Kernel as Natural policy for multi-item Coagulant for Color probabilistic inventory Removal of Synthetic model with all-units Textile Wastewater 25 discount 27 Jurnal Edisi Jurnal Edisi 2019 International 2019 IOP Conf. 1218, Conference on (2019) Sustainable Series: Journal Engineering and of Physics: Creative Computing Conf. Series Nama Dr. J. Dharma Lesmono Nama Hans Kristianto, S.T., M.T. Penulis Fakultas Jurusan Penulis Ke Fakultas Jurusan Ke Teknologi Matematika 1 Teknologi Teknik 1 Informasi Industri Kimia dan Sains

Penulis Dr. Jenny N. M. Penulis Taufik Limansyah, S.Si., UNPAR Soetedjo UNPAR M.T.

Analysis of portfolio Direct and indirect optimization with grouping strategies for a inequality constraints multi-item probabilistic inventory model 26 Jurnal Edisi 28 Jurnal Edisi Journal of Vol Physics: 1218, Journal of Vol. 1317; Conference (2019) Physics: No. 01 (2019) Series Conf. Series Nama Dr. J. Dharma Lesmono Nama Agus Sukmana, Drs., M.Sc. Penulis Fakultas Jurusan Penulis Ke Fakultas Jurusan Ke Teknologi Matematika 2 Teknologi Matematika 1 Informasi Informasi dan Sains dan Sains

Penulis Liem Chin, S.Si., M.Si.; Dr. UNPAR Erwinna Chendra, S.Si., M.Si.

Probabilistic Inventory Model with Expiration Date and All-Units Discount 29 Jurnal Edisi IOP Conf. Series: Materials Science and Engineering Vol. 546 (2019)

Nama Taufik Limansyah, S.Si., M.T.

Fakultas Jurusan Penulis Ke Teknologi Informasi dan Sains Matematika 1

Penulis UNPAR Dr. J. Dharma Lesmono

66 JURNAL NASIONAL TERAKREDITASI SINTA 1 DAN 2

MANAGING COMPANY’S FOREIGN CURRENCY LOAN TO INCREASE PERFORMANCE THROUGH ECONOMIC VALUE 1 ADDED Jurnal Edisi Economic Journal Trikonomika Vol. 18; No. 1 (2019)

Abstrak

One impact of global crisis, is increasing foreign currency rate of Indonesian IDR. Company with foreign debt exposures will suffer financial losses, if the exchange rate of the foreign currency becomes stronger. These losses will reduce the company Economic Value Added (EVA), and reduce the financial performance. Then, the purpose of this research is to calculate the effect of changes in foreign currency rates on the company’s economic value added. Research method used in this study is Causal method. This study used company secondary data, based on Indonesian Stock Exchange. Based on research conducted, the result of this research proves that the changes in foreign currency rates on foreign liabilities affected significantly (with α = 5%) on company’s economic value added. In PT. KF case, revenues earned by the company could cover all cost incurred including cost to cover the loss of exchange rate gap of foreign debt and capital cost.

Kata Kunci foreign currency rates; company’s foreign debt; economic value added; foreign currency loss; company’s performance

Nama Dr. Elizabeth Tiur Manurung, M.Si., Ak.

Fakultas Jurusan Penulis Ke Ekonomi Akuntansi 1

MODEL FOR CALCULATING COST OF LAUNDRY SERVICES BY CONSIDERING ENVIRONMENTAL IMPACTS AND COSTS 2 Jurnal Edisi Journal of Accounting and Investment Vol. 20; No. 2 (2019)

Abstrak

This research aims at developing a model for calculating cost of laundry services performed by small-scale laundry businesses which incorporates environmental impact and costs into the model. The activity-based costing method is used to assign indirect costs to the cost object. This research is a continuation of the previous research conducted by the authors. Since environmental impacts and costs are considered, there will be changes in the resources and activity consumed, compared to the original model. The authors identified several environmental costs, such as eco-detergent and plastic, government fines, loss of customers and environmental costs borne by wider society. In analyzing the environmental costs, EPA classification is used. The suggested model is still in the theoretical phase, as some environmental costs arising from laundry business activities are difficult to measure. Some recommendations to laundry businesses and government are provided. Kata Kunci Activity-Based Costing; Cost of Services; Environmental Costs; Environmental Impact; Laundry

Nama Elsje Kosasih, Dra., Akt., M.Sc., CMA

Fakultas Jurusan Penulis Ke Ekonomi Akuntansi 1

Penulis UNPAR Verawati Suryaputra, S.E., M.M. ; Amelia Limijaya, SE., M.Acc.Fin.; Atty Yuniawati, S.E., MBA., CMA.

PENYELESAIAN SENGKETA KONSUMEN AKIBAT PERJANJIAN BAKU DAN KLAUSULA BAKU PASCA KEBERLAKUAN UNDANG-UNDANG NOMOR 21 TAHUN 2011 3 TENTANG OTORITAS JASA KEUANGAN

Jurnal Edisi Jurnal Hukum & Pembangunan Vol. 48 ; No. 4 (2018)

Abstrak

Pasca berlakunya Undang-Undang Nomor 11 Tahun 2011 tentang Otoritas Jasa Keuangan (UUOJK), maka terdapat 2 (dua) buah undang-undang yang mengatur tentang penyelesaian sengketa antara pelaku usaha dengan konsumen. Pertama, Undang-Undang Nomor 8 Tahun 1999 tentang Perlindungan Konsumen (UUPK), dan kedua Undang-Undang Nomor 11 Tahun 2011 tentang Otoritas Jasa Keuangan

68 (UUOJK). Tulisan ini akan membahas dan menganalis penyelesaian sengketa antara pelaku usaha dengan konsumen pasca berlakunya Undang-Undang Nomor 11 Tahun 2011 tentang Otoritas Jasa Keuangan dengan menggunakan metode penelitian yuridis normatif/yuridis dogmatis. Dalam akhir tulisan disampaikan beberapa kesimpulan tentang penyelesaian sengketa konsumen berdasarkan UUOJK atau berdasarkan UUPK Kata Kunci OJK, Undang-Undang, Konsumen, Normatif

Nama Aluisius Dwi Rachmanto, S.H., M.Hum.

Fakultas Jurusan Penulis Ke Hukum Ilmu Hukum 1

DISIPLIN SUBSIDI PERIKANAN DALAM SISTEM PERDAGANGAN GLOBAL DAN IMPLIKASINYA BAGI 4 PERIKANAN INDONESIA Jurnal Edisi Jurnal Ilmu Hukum Veritas et Justitia Vol. 5; No. 1 (2019)

Abstrak

Government policies providing financial aid to small and medium scale business enterprises are found everywhere around the globe, including those that is managed by Indonesia, and is allowed under the world trade arrangement managed by the WTO. An important part of this policy is subsidies made available to fishing businesses. Be that as it may, overfishing and the resulting fish stock crisis globally has made the practice of subsidizing marine fishing enterprises suspect in light of marine environment protection. This article discusses the issues of fishing subsidies as practiced in Indonesia in view of the current regime of economic law and the need to develop a sustainable fishing practices. Kata Kunci WTO, fishing subsidies, sustainability, fishing management

Nama Dyan Franciska Dumaris Sitanggang, S.H., M.H.

Fakultas Jurusan Penulis Ke Hukum Ilmu Hukum 1

PERGESERAN FUNGSI DAN KEDUDUKAN BADAN PERMUSYAWARATAN DESA MENURUT UNDANG-UNDANG NOMOR 6 TAHUN 2014 TENTANG DESA (STUDI BPD DESA 5 KUNJANG)

Jurnal Edisi Refleksi Hukum: Jurnal Ilmu Hukum Vol. 3; No. 2 (2019)

Abstrak

This research discusses the effect of shifting the function and the state of the Village Consultative Body according to Law No. 6 of 2014 on Village. The study particularly took an observation in Kunjang Village. The used method in this paper is normative research which applies legislation approach and historical approach. The final conclusion resulted by this research is the shift of function and the state of the Village Consultative Body had influenced the state of the Village Consultative Body Kunjang. First, the state of the Village Consultative Body Kunjang is no longer an element of village administration and as a "partner" of the headman. Second, the monitoring function becomes the only main function of the state of the Village Consultative Body Kunjang, whereas the legislative function becomes the duty of the Kunjang Village Government, stressing that the legislative function is not part of the main duty and responsibility of the Village Consultative Body Kunjang. Kata Kunci Village Consultative Body, The State of Village Consultative Body, The Function Of Village Consultative Body Nama Galuh Candra Purnamasari, S.H., M.H.

Fakultas Jurusan Penulis Ke Hukum Ilmu Hukum 1

ELIMINATING VIOLENCE AGAINST WOMEN IN PACIFIC THROUGH MULTI-TRACK DIPLOMACY 6 Jurnal Edisi Jurnal Ilmiah Hubungan Internasional Vol. 14; No. 2 (2018)

Abstrak

Humanitarian issue that often raised as a problem for developing countries, is often likely linked to gender issue. Having labeled as a region with the highest violence data prevalence, Pacific Islands countries possess assorted factors that tolerates the practice of gender dominance and discrimination amongst their societies. Responding this phenomenon, the governments in Pacific Islands countries are oftentimes receiving assistance from other international relations actors, in which one of them is UN Women. With the support from Australian government, this UN body assist numerous institutions from various level in making the effort to eliminate

70 violence against women as the most protrude form of gender based discrimination in Pacific. Involvement of other parties from diverse groups indicates the relations between actors of Multi-Track Diplomacy with the program initiated by UN Women. Using theory of Multi-Track Diplomacy and concept of Gender-Based Violence, this research identifies the participation and contribution made by a total of nine tracks in responding to violence against women issue in the Pacific. Such response itself is one of the world peace endeavors, which is also the ultimate purpose of Multi-Track Diplomacy. Result of this response shaped in their participation and contribution within variety of programs under Pacific Fund. Kata Kunci Pacific, gender equality, foreign aids, Multi-Track Diplomacy, peacemaking Nama Elisabeth Adyiningtyas Satya Dewi, S.IP., M.A., Ph.D.

Fakultas Jurusan Penulis Ke Ilmu Sosial dan Ilmu Politik Ilmu Hubungan 2 Internasional

ESTIMASI EKIVALENSI MOBIL PENUMPANG BERDASAR DATA KECEPATAN PADA JALAN TOL 7 Jurnal Edisi Jurnal Jalan-Jembatan Vol. 35 ; No. 2 (2018)

Abstrak

Berbagai studi telah dilakukan untuk menyesuaikan nilai EMP agar lebih sesuai dengan perubahan yang terjadi di lapangan. Studi ini bertujuan untuk menganalisis distribusi kecepatan dua ruas jalan tol dan menggunakannya untuk mengestimasi nilai EMP. Studi dilakukan dengan menggunakan data arus dan kecepatan ruas jalan dalam kota dan luar kata, yaitu ruas Jakarta-Cikampek dan ruas Lingkar Luar- Jakarta. Hasil analisis menunjukkan bahwa kecepatan arus lalu lintas di kedua jalan tol mengikuti distribusi normal dan nilai EMP untuk jalan tol dalam kota adalah lebih besar dibandingkan nilai untuk jalan tol luar kota. Hasil perbandingan menunjukkan bahwa nilai EMP berdasarkan data kecepatan adalah lebih kecil dibanding nilai dalam MKJI 1997 Kata Kunci EMP, kecepatan tol, dalam kota, luar kota Nama Tri Basuki Joewono, Ph.D.

Fakultas Jurusan Penulis Ke Teknik Ilmu Teknik Sipil 1

EVALUASI KOREKSI LENDUTAN AKIBAT TEMPERATUR DAN BEBAN (PD T-05-2005-B) PADA UMUR PERKERASAN 8 Jurnal Edisi Jurnal Teknik Sipil Vol. 26; No. 2 (2019)

Abstrak

Akurasi evaluasi struktur perkerasan lentur menjadi penting karena keputusan strategi pemeliharaan perkerasan merupakan bagian integral sistem manajemen perkerasan berdasarkan evaluasi tersebut. Lendutan FWD merupakan salah satu cara yang ditawarkan oleh Pd T-05-2005-B (2005). Lendutan dipengaruhi temperatur perkerasan dan beban yang bekerja pada saat pengujian. Pedoman menggunakan temperatur 35oC dan beban 4.08 ton sebagai temperatur dan beban standar. Dari hasil analisis, koreksi lendutan akibat beban tidak standar dapat digunakan dan menghasilkan solusi yang akurat. Akan tetapi, koreksi lendutan akibat pengukuran pada temperatur tidak standar akan menghasilkan kesalahan lendutan, sehingga juga pada prediksi umur sisa. Kesalahan prediksi umur sisa akan semakin besar jika pengujian lendutan dilakukan semakin jauh dari temperatur standar. Koreksi lendutan disarankan diubah dengan Persamaan 19, yang akan memberikan prediksi umur sisa lebih akurat seperti tampak pada Tabel 2.

Kata Kunci lendutan FWD, umur sisa, temperatur standar, beban standar, faktor koreksi

Nama Aloysius Tjan Hin Hwie, Ir, MT, Ph.D.

Fakultas Jurusan Penulis Ke Teknik Teknik Sipil 1

STUDI EKSPERIMENTAL KEMAMPUAN BIOSEMENTASI BAKTERI LOKAL PADA TANAH PASIR LEPAS 9 Jurnal Edisi Jurnal Teknik Sipil Vol. 26; No. 2 (2019)

Abstrak

Makalah berikut menyajikan hasil penelitian biosementasi menggunakan bakteri lokal yang hidup di tanah pasir lepas yang diambil dari kota Padang. Biosementasi adalah suatu metode perbaikan tanah dengan memanfaatkan kemampuan bakteri yang memang hidup di dalam tanah untuk menghasilkan enzim urease. Aplikasi dari biosementasi ini dapat dimanfaatkan untuk menurunkan potensi terjadinya likuifaksi akibat gempa karena kuat geser tanah akan meningkat drastis. Penelitian ini bertujuan untuk menentukan spesies bakteri dengan kemampuan urease yang diisolasi dari pasir Padang, menentukan kadar CaCO3 dari setiap sampel

72 tersementasi, dan untuk menentukan kuat tekan bebas tanah setelah masa perlakuan. Bakteri urease positif dari tanah pasir Padang diisolasi dan ditumbuhkan dalam syringe 100 ml berisi tanah pasir Padang selama 4-6 hari. Hasil isolasi menunjukkan bahwa spesies bakteri teridentifikasi sebagai Sporosarcina sp.. Selama masa perlakuan, sampelsampel diberikan nutrisi setiap 12 jam sekali. Hasil pengujian menunjukan kadar CaCO3 yang terukur pada uji eksperimental adalah berkisar antara 23.4% hingga 45.8%. Sedangkan untuk nilai kuat tekan bebas (qu) tanah yang tersementasi berkisar diantara 150 kPa hingga diatas 500 kPa. Selanjutnya, keberadaan CaCO3 diobservasi menggunakan Scanning Electron Microscope dan uji X-Ray Diffraction.

Kata Kunci Biosementasi, Sporosarcina Sp., Tanah Pasir Lepas, Perbaikan tanah

Nama Aswin Lim, Ph.D.

Fakultas Jurusan Penulis Ke Teknik Teknik Sipil 1

Penulis UNPAR Anastasia Sri Lestari, Ir., M.T.

SYNTHESIS OF PHOSPHORYLATED SUGAR PALM (AREN) STARCH USING LOW LEVEL SODIUM TRIPOLYPHOSPHATE 10 (STPP) Jurnal Edisi Jurnal Bahan Alam Terbarukan Vol. 8; No. 1 (2019)

Abstrak

Sugar palm or aren (Arenga pinnata) is a traditional source of starch widely cultivated throughout Indonesia. Despite its potentiality to be used as feedstock for food industries, there has been very little research reported on sugar palm starch characterization and modification. This paper describes a preliminary experimental study on the chemical modification, i.e. phosphorylation of sago palm starch using low level of Sodium tripolyphosphate (STPP), and characterization of some important physicochemical and functional properties of the modified products. Starch phosphate synthesis was conducted at an initial pH of 9, reaction temperatures of 120-140 oC, and STPP intakes of 0.5-1.5%-weight based on dry starch. The experimental result shows that Degree of Substitution (DS) of the obtained products is accessible in the range of 0.0013 – 0.0068. An increase in reaction temperature as well as STPP intake leads to products with higher DS values. The modified starch products exhibit higher swelling power (16.57-24.81 g/g) and solubility (9.12-22.79 %-w/w) compared to native sugar palm starch (swelling power and solubility of 14.50 g/g and 7.91 %-w/w, respectively). Phosphorylated starch products also have significantly improved paste clarity clarity and water/ oil absorption capacity

compared to native sugar palm starch. The result suggests that phosphorylation is a promising method to enhance the properties of sugar palm starch. Kata Kunci Aren; Arenga pinnata; Phosphorylation; Starch; Sugar palm

Nama Dr. Asaf Kleopas Sugih, Ir.

Fakultas Jurusan Penulis Ke Teknologi Industri Magister Teknik Kimia 1

Penulis UNPAR Susiana Prasetyo S., S.T., M.T.

PENEMPATAN PHASOR MEASUREMENT UNIT UNTUK MENENTUKAN PREDIKSI MARGIN KESTABILAN TEGANGAN 11 Jurnal Edisi JNTETI, Jurnal Nasional Teknik Elektro Vol. 8; No. 1 (2019) dan Teknologi Informasi

Abstrak

Perkembangan sistem tenaga dalam pembuatan transmisi baru dan fasilitas pembangkitan sistem tenaga listrik telah dibebani lebih besar daripada biasanya. Sebagai konsekuensinya, banyak sistem tenaga yang mengalami permasalahan tegangan yang pada akhirnya akan memicu ketidakstabilan tegangan. Makalah ini membahas penempatan phasor measurement unit (PMU) dengan menggunakan integer linear programminguntuk penentuan prediksi margin kestabilan tegangan (voltage stability margin - VSM) dengan didasarkan pada pengukuran lokal yang memakai ekuivalenThevenin untuk representasi sistem. Penempatan PMU dipilih sedemikian rupa dengan algoritme integer linear programmingtersebut sehingga dapat ditentukan phasor tegangan dan arus pada setiap bus pada sistem tenaga listrik. Data-data yang diperoleh, berupa phasortegangan dan arus pada setiap bus, dipakai untuk perhitungan prediksi margin kestabilan tegangan. Kata Kunci penempatan PMU, margin kestabilan tegangan, integer linear programming, pengukuran lokal, ekuivalenThevenin, phasor measurement unit

Nama Levin Halim, S.T., M.T.

Fakultas Jurusan Penulis Ke Teknologi Industri T. Elektro (Mekatronika) 1

74 ON MODELLING AND SOLVING HETEROGENEOUS VEHICLE ROUTING PROBLEM WITH MULTI-TRIPS AND MULTI- PRODUCTS 12 Jurnal Edisi Jurnal Teknik Industri - Jurnal Keilmuan Vol. 21; No. 2 (2019) dan Aplikasi Teknik Industri

Abstrak

Vehicle routing problem (VRP) is a model to determine an optimal routing plan for a fleet of homogeneous vehicles to serve a set customer which some operational constraints are satisfied. In most practical distribution problems, customer demands are served using heterogeneous fleet of vehicles. This kind of VRP is called Heterogeneous Vehicle Routing Problem (HVRP). HVRP has evolved into a rich research area because of its practical. There were many studies of rich extensions of the standar HVRP. This research aims to enrich the extentions of HVRP which is motivated by real case in one of pharmacy distribution company in Indonesia which is delivered multi-products to its 55 customers by allowing some vehicles which has small capacity to perform multi-trips. This problem is called Heterogeneous Vehicle Routing Problem with Multi-Trips and Multi-Products (HVRPMTMP). The mixed integer linear programming is developed based on four-index vehicle flow formulation. The model can be used generally in the same context of distribution problem. HVRPMTMP is generally NP-Hard problem, so the computational time using branch and bound in LINGO 16.0 is increasing exponentially by increasing the number of customers. Genetic algorithm is proposed to solve the real case. The result of the proposed GA can reduce the total cost from Rp 352540.6,- to Rp 180555,- or 48.78% from the current company policy. Kata Kunci Heterogeneous Vehicle Routing Problem, Multi-Trips, Multi-Products, Mixed Integer Linear Programming, Genetic Algorithm

Nama Fran Setiawan, S.T., M.Sc.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Industri 1

INCORPORATING CANNIBALIZATION INTO PRICING OPTIMIZATION USING CHOICE DATA: AN APPLICATION TO THE PRICING OF MOBILE BROADBAND SERVICES 13 Jurnal Edisi Jurnal Teknik Industri - Jurnal Keilmuan Vol. 21; No. 2 (2019) dan Aplikasi Teknik Industri

Abstrak

Price differentiation may not be as effective in increasing profitability due to imperfect segmentation, arbitrage, and, cannibalization. Cannibalization takes place when customer with higher willingness-to-pay buys lower-priced product. This research proposes an approach to incorporating cannibalization into pricing optimization using choice data. From choice data, individual level utilities are estimated using hierarchical Bayes and individual choice is predicted using randomized first choice simulation. Individual choices are then aggregated to obtain the demand function. The novelty of this research is in the way cannibalization is incorporated into the pricing optimization. Instead of integrating cannibalization into the demand function or representing it as a separate component in the optimization formulation, in this research, cannibalizing products are incorporated into the simulation scenario as competing products, based on which the demand functions used in the optimization are derived. This approach is more direct and realistic than those in the previous research. The approach was implemented in a case study of mobile broadband services in Indonesian price-sensitive market. The result shows that two-fare-class price differentiation incoporated with product differentiation increases total contribution of about 60% compared to single-fare-class policy. Furthermore, it is also shown from our case study that starting from a three-fare-class policy, through iterations, our approach suggests that policy with two-fare-class results in a not significantly different total contribution. Kata Kunci Cannibalization, pricing optimization, choice data, hierarchical Bayes, randomized first choice Nama Fransiscus Rian Pratikto, S.T., M.T.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Industri 1

76 PROPOSING AN ALGORITHM TO SOLVE THE FORWARD AND REVERSE LOGISTICS DISTRIBUTION PROBLEM WITH ONE DOOR CONTAINER 14 Jurnal Edisi Jurnal Teknik Industri - Jurnal Keilmuan Vol. 21; No. 01 (2019) dan Aplikasi Teknik Industri

Abstrak

Forward and reverse logistics are two types of distribution methods that shall be synergized in practices. Two problems in synergizing the two distributions type are (1) how to route vehicles and (2) how to pack the goods inside the vehicle. A truck with only one door for loading and unloading process could create numerous problems of item packing activities. An item picked up from a customer could occasionally block other goods which need to be delivered; hence, the courier shall unload other items before the loading process. This condition will increase the probability of item damage, longer on-loading/off-loading (lo/lo) time, and higher lo/lo cost because of the rapid item movement. Therefore, this article aims to propose an algorithm to solve the problem by creating an algorithm hybrid of routing and packing to find the solution for routing and packing problem, sequentially, with a metaheuristic approach. The proposed method calculates the cost from routing procedure and sum of item movement in every loading and unloading process. Based on the trial on 25 cases, this algorithm generates 59.64% of the containers have zero goods repacking. Several potential future research avenues are also proposed in this article. Kata Kunci Supply Chain; Reverse Logistics; Loading Problem; Genetic Algorithm; VRP-SPD Nama Paulina Kus Ariningsih, S.T., M.Sc.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Industri 2

Penulis UNPAR Titi Iswari, S.T., MBA., M.Sc.

PROPOSING AN ALGORITHM TO SOLVE THE FORWARD AND REVERSE LOGISTICS DISTRIBUTION PROBLEM WITH ONE 15 DOOR CONTAINER Jurnal Edisi Jurnal Teknik Industri Vol. 21; No. 01 (2019)

Abstrak

Forward and reverse logistics are two types of distribution methods that shall be synergized in practices. Two problems in synergizing the two distributions type are

(1) how to route vehicles and (2) how to pack the goods inside the vehicle. A truck with only one door for loading and unloading process could create numerous problems of item packing activities. An item picked up from a customer could occasionally block other goods which need to be delivered; hence, the courier shall unload other items before the loading process. This condition will increase the probability of item damage, longer on-loading/off-loading (lo/lo) time, and higher lo/lo cost because of the rapid item movement. Therefore, this article aims to propose an algorithm to solve the problem by creating an algorithm hybrid of routing and packing to find the solution for routing and packing problem, sequentially, with a metaheuristic approach. The proposed method calculates the cost from routing procedure and sum of item movement in every loading and unloading process. Based on the trial on 25 cases, this algorithm generates 59.64% of the containers have zero goods repacking. Several potential future research avenues are also proposed in this article. Kata Kunci Supply Chain; Reverse Logistics; Loading Problem; Genetic Algorithm; VRP-SPD

Nama Paulina Kus Ariningsih, S.T., M.Sc.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Industri 2

Penulis UNPAR Titi Iswari, S.T., MBA., M.Sc.

APLIKASI KOAGULAN BIJI ASAM JAWA DALAM PENURUNAN KONSENTRASI ZAT WARNA DRIMAREN RED PADA LIMBAH 16 TEKSTIL SINTETIK PADA BERBAGAI VARIASI OPERASI Jurnal Edisi JURNAL REKAYASA PROSES Vol. 12; No. 2 (2018)

Abstrak

Since textile industries use a lot of water in their processes, a huge volume of waste water containing dyes are produced by the increase of the production capacity. Coagulation and flocculation are the common processes applied since they can effectively decrease the dye concentration in the waste water. These treatments usually utilize chemical coagulant and flocculant which are expensive and non- biodegradable. In this research, tamarind seed as one of biobased-coagulants was studied and developed to reduce drimaren dark red HF-CD concentration which is used widely in textile industry in the synthetic waste water. The research was designed using Design Expert 7.0.0, Central Composite Design with range of variables as follows: pH (2-7), tamarind seed concentration (1-3 g/L), and dye concentration (20-30 ppm). The result shows a promising application of natural

78 coagulant up to 94.25% decrease of dye concentration in the optimum condition of 3.68 g/L tamarind seed concentration, 25 ppm dye concentration and pH value of 4.5. Kata Kunci coagulation; dye concentration acid; natural coagulant; tamarind seeds

Nama Angela Martina, S.T., M.T.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Kimia 1

Penulis UNPAR Jenny Novianti Muliarahayu Soetedjo, S.T., M.Sc., Ph.D

STUDI KINETIKA PROSES ATMOSPHERIC PRESSURE ACID LEACHING BIJIH LATERIT LIMONIT MENGGUNAKAN 17 LARUTAN ASAM NITRAT KONSENTRASI RENDAH Jurnal Edisi Jurnal Rekayasa Proses Vol. 12 ; No. 2 (2018)

Abstrak

Kinetics study of atmospheric pressure acid leaching (APAL) process is indispensable for extractor design in an industrial scale. So far, the kinetic model used for this process is the shrinking core model. In this study, the shrinking core model was evaluated against experimental data for laterite leaching process using a solution of low concentration nitric acid (0.1 M). Variations in temperature and particle size were carried out at 303–358 K and <75–250 microns. Other operating conditions, such as pulp density, stirring speed, and time were kept at 20% w/v, 200 rpm, and 120 minutes, respectively. The model evaluation results showed that the shrinking core model was not suitable for this process because the process controlling stage is not just one stage only. Kata Kunci kinetics; laterite; leaching; shrinking core Nama Kevin Cleary Wanta, S.T., M.Eng.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Kimia 1

Penulis UNPAR Ratna Frida Susanti, Ph.D.

THE INFLUENCE OF FOAMING AGENT AND CAKE THICKNESS ON THE DRYING PROCESS TOMATOES USING A TRAY 18 DRYER Jurnal Edisi Reaktor (Chemical Engineering Journal) Vol. 18; No. 3 (2018)

Abstrak

Moisture content of tomato (Licopersicon esculentum Mill.) is very high, so easily damaged due to physical impact, enzyme and microbes activity. Further processing is necessary in order to improve shelf life, one way is drying method. This work studied the effect of foaming agent and cake thickness in tomato drying using tray dryer at various temperatures. Foaming agent is used to convert the material into foam, so that the drying temperatu re can be set relatively low to preserves color, aroma and nutrient composition of the material. The tray dryer is used, because it is simple and the operation cost is relatively cheap. In this work, tomatoes were sliced, crushed for 10 minutes using blender, separated from the seeds and residues with a 60 mesh sieve, and then mixed with dextrin and foaming agent Tween 80 each by 5% weight respectively. Each mixture was blended for 10 minutes. The tray dryer was filled with hot air at 2.0 m/sec with temperature variation of 40, 50, 60 and 70ºC and cake thickness variation of 2 and 4 mm. The results obtained, drying at 50°C is faster than 40ºC, while 50 to 70º C is relatively the same. The thicker the cake, the slower the drying time. Performance of foaming agent Tween 80 compared to chemical foaming agent is a natural egg white powder. Drying with a foaming agent Tween 80 faster than egg white powder. Kata Kunci cake thickness; foaming agent; tomato; tray dryer Nama Prof. Dr. Judy Retti Witono, Ir., M.App.Sc.

Fakultas Jurusan Penulis Ke Teknologi Industri Teknik Kimia 3

Penulis UNPAR Herry Santoso, S.T., M.T.M., Ph.D.

80 JURNAL NASIONAL NON SINTA 1 DAN 2

Accounting Ethics Meningkatkan Education: What And Komitmen Karyawan How To Teach? Melalui Employee Stock Ownership Program 1 Jurnal Edisi Untuk Meningkatkan Kajian Vol. Kesejahteraan 3 Akuntansi 21; No. Karyawan 2 (2019) Jurnal Edisi Amelia Limijaya, SE., Jurnal Riset Vol. Nama M.Acc.Fin. Akuntansi 10; No. Kontemporer 2 Penulis (2018) Fakultas Jurusan Ke Dr. Elizabeth Tiur Ekonomi Akuntansi 1 Nama Manurung, M.Si., Ak.

Penulis Fakultas Jurusan Ke Pengaruh Indeks Ekonomi Akuntansi 1 Pembangunan

Teknologi Terhadap

Kinerja Koperasi

The Implementation Of 2 Jurnal Edisi Fraud Risk Assessment Jurnal Vol. For Smes Credit Pengkajian 12; Application In (2018) Koperasi dan Determining Auditor's UKM 4 Response

Angga Sasmitapura Jurnal Edisi Nama S.E., M.Ak., CMA., Jurnal Vol. 12 PFM Pengkajian (2018) Penulis Koperasi Dan Fakultas Jurusan Ke Umkm Ekonomi Akuntansi 2 Dr. Elizabeth Tiur Nama Manurung, M.Si., Ak.

Penulis Fakultas Jurusan Ke Ekonomi Akuntansi 1

Pengembangan Strategic Planning dan Aplikasi Akuntansi Balanced Scorecard Sederhana Penyusunan Serta Penerapannya Laporan Keuangan Bagi pada Restoran Cepat Yayasan Saung Organik Saji Wendys 6 Lascing 5 Jurnal Edisi Jurnal Edisi Jurnal Vol. Infokop Media Vol. Akuntansi 10; No. Pengkajian 28; No. Maranatha 1 (2018) Koperasi 1 (2018) Usaha Kecil Felisia, S.E., AMA., Nama dan Menengah M.Ak., CMA

Elsje Kosasih, Dra., Penulis Nama Fakultas Jurusan Akt., M.Sc., CMA Ke Ekonomi Akuntansi 2 Penulis Fakultas Jurusan Ke Ekonomi Akuntansi 1

Penulis Verawati Suryaputra, UNPAR S.E., M.M.; Atty Penyusunan Sistem Yuniawati, S.E., MBA., Informasi Akuntansi CMA.; Felisia, S.E., Terkomputerisasi Bagi AMA., M.Ak., CMA.; Klinik Pratama Pandu Gery Raphael Lusanjaya, S.E., M.T.; Jurnal Edisi Amelia Limijaya, SE., 7 Jurnal Vol. 4; M.Acc.Fin., Jimmy No. 1 Sutanto Kurnia, S.E., Pengabdian (2019) MBA.; Puji Astuti Masyarakat Rahayu, SE., Ak., Universitas M.Ak.; dan Dr. Sylvia Merdeka Fettry Elvira Maratno, Malang S.E., S.H., M.Si., Ak. Felisia, S.E., AMA., Nama M.Ak., CMA.

Penulis Fakultas Jurusan Ke Ekonomi Akuntansi 1

Penulis Chandra Ferdinand

UNPAR Wijaya, SE., M.Ak.; Elsje Kosasih, Dra., Akt., M.Sc., CMA; Tanto Kurnia, S.T., M.A., M.Ak.; Dr. Sylvia Fettry Elvira Maratno,

S.E., S.H., M.S

82 Pengaruh Indeks Pengaruh Nilai Pembangunan Akuntansi Dasar Teknologi Terhadap terhadap Nilai-nilai Mata Kinerja Koperasi Kuliah Akuntansi

Lainnya (Studi Kasus 8 Jurnal Edisi pada Mahasiswa Jurnal Vol. Program Studi Pengkajian 12; No. 10 Akuntansi Universitas 11 Koperasi dan Katolik Parahyangan) (2018) UKM Jurnal Edisi Michael, S.E., M.Ak., Nama Journal of Vol. CMA., PFM Accounting 05; No. 02 Penulis and Business Fakultas Jurusan (2019) Ke Studies Ekonomi Akuntansi 1 Samuel Wirawan, Nama S.E., M.M.,Ak

Penulis Fakultas Jurusan Mengukur Kerentanan Ke Siswa Sekolah Ekonomi Akuntansi 1 Menengah Melakukan

Fraud: Survei di Kota

Bandung 9 Utilising Potential Jurnal Edisi Locality for Managing Jurnal Aset Vol. SME'S Creativity in West (Akuntansi 10; No. Java Riset) 02

(2018) 11 Jurnal Edisi Prof. Dr. Hamfri Jurnal Vol. Nama Djajadikerta, Drs., Pengkajian 12; (2018) Ak. , M.M. Koperasi dan UKM Penulis Fakultas Jurusan Ke Dr. Elvy Maria Ekonomi Akuntansi 1 Nama Manurung S.E., Ak., M.T. Penulis Dr. Sylvia Fettry Elvira UNPAR Maratno, S.E., S.H., Penulis Fakultas Jurusan M.Si., Ak.; Damajanti Ke Tanumihardja, S.E., Ekonomi Manajemen 1 M.Ak. Penulis Catharina Badra UNPAR Nawangpalup, Ph.D.

Analisis Pengambilan Merefleksikan Integrasi Pinjaman UKM di Kota Eks-Agama Djawa Bandung Sunda (ADS) dari Perspektif Pertobatan 12 Jurnal Edisi 14 Kornelius (Kis.10:1-48) Jurnal Vol. Pengkajian 12; Jurnal Edisi Koperasi dan (2018) Jurnal Teologi Vol. 7; UKM No. 1 (2018) Probowo Erawan Nama Sastroredjo S.E., R. Fransiskus Bhanu Nama M.Sc. Viktorahadi, Pr., S.Ag., L.Th. Penulis Fakultas Jurusan Penulis Ke Fakultas Jurusan Ke Ekonomi Manajemen 1 Filsafat Ilmu 1 Penulis Natalia Christi, S.T., Filsafat UNPAR MBA.

Kornelius, Sang Pribadi

Transisi sebagai Consumer Prefence of Tawaran Model Dialog Service Delivery at 15 Rumah Sakit Hasan Jurnal Edisi Sadikin After BPJS Fides Et Ratio Vol. 2; Implementation No. 2 13 (2018) Jurnal Edisi R. Fransiskus Bhanu Vol. II; Management Nama Viktorahadi, Pr., No. I and S.Ag., L.Th. Entrepreneur- (2019) Penulis ship Journal Fakultas Jurusan Ke Irsanti Hasyim, SE., Nama Filsafat Ilmu 1 MSM., M.Eng. Filsafat Penulis Fakultas Jurusan Ke Ekonomi Manajemen 1

84 Pengaruh Nilai dan Analisis Loyalitas Kepercayaan Terhadap Pelanggan Pada Komitmen Afektif: Studi Timezone Bandung Kausal Terhadap Guru Indah Plaza Di Sekolah Bogor Raya 18 Jurnal Edisi 16 National Plus, Bogor Jurnal Vol.11; Jurnal Edisi Transaksi No.1 Jurnal Vol.12;No.2 (2019) (2018-2019) Computech Daniel Hermawan, Nama dan Bisnis S.AB., M.Si., MBA.

Wilfridus Demetrius Penulis Nama Fakultas Jurusan Siga, SS., M.Pd. Ke

Fakultas Jurusan Penulis Ke Ilmu Ilmu 1 Sosial Administrasi Filsafat Ilmu 1 dan Ilmu Bisnis Filsafat Politik

Penulis Yoke Pribadi Kornarius, Tujuan Hukum sebagai UNPAR S.AB., M.Si. Tujuan Negara

Jurnal Edisi 17 Prisma - Vol. Kajian Keterkaitan Jurnal 38; No. Fasilitas Kur Mikro dan Pemikiran 2 Profil Debitur: Studi (2019) Sosial Kasus UMKM di Ekonomi Bandung 19 Dr. Tristam Pascal Jurnal Edisi Nama Moeliono, S.H., M.H., Jurnal Vol. LL.M. Pengkajian 12; (2018) Penulis Koperasi dan Fakultas Jurusan Ke UKM Hukum Ilmu 1 Gandhi Pawitan Ir., Nama Hukum M.Sc., Ph.D. Penulis Tanius Sebastian, Penulis UNPAR S.H., M.Fil. Fakultas Jurusan Ke

Ilmu Ilmu 1 Sosial Administrasi dan Ilmu Bisnis Politik

Tipologi Inovasi Sektor Digitalisasi Bagi Usaha Publik Pada Tiga Kecil Menengah Dalam Program Inovatif Era Globalisasi Pemerintah Daerah 22 Kota Surabaya Jurnal Edisi (Tinjauan Reflektif Jurnal Vol. terhadap Tiga Inovasi Infokop 28, (2018) 20 Pelayanan Publik Pemerintah Kota Dr. Aknolt Kristian Surabaya Tahun 2018) Nama Pakpahan, S.IP., M.A. Jurnal Edisi Penulis Jurnal Vol. 0; Fakultas Jurusan Manajemen No. 2 Ke Pelayanan (2018) Ilmu Ilmu 1 Publik Sosial Hubungan dan Ilmu Internasional Kristian Widya Politik Nama Wicaksono, S.Sos. M.Si.

Penulis Fakultas Jurusan Ke International Education Ilmu Ilmu 1 as EU's Soft Power Sosial Administrasi Instrument : Winning dan Ilmu Publik the Heart of Politik 23 Scholarship Seeker

Jurnal Edisi Transforming The Spirit Of New Public Service Widya Vol. 9; No. 1 Into Public Management Sosiopolitika (2018) Reform In Indonesia

Ratih Indraswari, 21 Jurnal Edisi Nama S.IP., MA. Jurnal Vol. 2; Penulis Manajemen No.1 Fakultas Jurusan Ke Pelayanan (2018) Publik Ilmu Ilmu 1 Sosial Hubungan Kristian Widya dan Ilmu Internasional Nama Wicaksono, S.Sos. Politik M.Si.

Penulis Fakultas Jurusan Ke

Ilmu Ilmu 1

Sosial Administrasi dan Ilmu Publik Politik

86 Program Revitalisasi Kinerja Struktural Sungai Citarum; Sebuah Interlocking Analisis Strength, Compressed Earth Weakness, Advocates, Block (Iceb) Dengan Advesaries (SWAA) Serat Ijuk Sebagai 26 Stabilisator Jurnal Edisi 24 Jurnal Ilmu Vol. Jurnal Edisi Administrasi : 16; ARTEKS Vol. 3; Media No. 1, Jurnal Teknik No 1 (2019) Pengembangan Arsitektur (2018) Ilmu dan Praktek Budianastas Nama Administrasi Prastyatama, S.T., M.T. Sukawarsini Penulis Nama Djelantik, Dra., Fakultas Jurusan Ke M.I.S., Ph.D. Teknik Arsitektur 1 Fakulta Penuli Jurusan s s Ke Ilmu Ilmu 2 Penulis Anastasia Maurina, Sosial Hubungan UNPAR S.T., M.T. dan Internasional Ilmu Politik Self-Kinetic Jalousie Sebagai Penerapan Teknologi Climate Visi Poros Maritim Responsive-Adaptable Dunia dan Diplomasi Architecture Perbatasan Indonesia 27 di Kepulauan Natuna Jurnal Edisi 25 Modul Vol. Jurnal Edisi 19; Analisis CSIS Vol. No. 02 48; (2019) No. 1 Wulani Enggar Sari, (2019) Nama S.T., M.T. Idil Syawfi, S.IP., Nama Penulis M.Si. Fakultas Jurusan Ke Penulis Fakultas Jurusan Teknik Arsitektur 1 Ke

Ilmu Ilmu 2

Sosial Hubungan dan Ilmu Internasional Politik

Evaluasi Proyeksi Studi Kasus Aliran Demand Barang Dan Lumpur Di Desa Pasir Penumpang Pelabuhan Panjang Menggunakan Di Provinsi Maluku Program Flo-2D 28 Jurnal Edisi 30 Jurnal Edisi Jurnal Vol. Jurnal Vol. 3; Transportasi 19; Manajemen No. 2, No. 2, Aset (2019) 2019 Infrastruktur & Adrian Firdaus , Fasilitas Nama S.T., M.Sc. Budijanto Widjaja, Nama Penulis S.T., M.T., Ph.D. Fakultas Jurusan Ke Penulis Fakultas Jurusan Teknik Teknik Sipil 1 Ke

Teknik Teknik 1 Sipil Information and

Communications Technology Necessity Tegangan pada Tanah at Integrated Bus Dasar Perkerasan di 29 Terminal In Indonesia Lapangan Jurnal Edisi Penumpukan Peti Kemas Pelabuhan Jurnal HPJI Vol. 5 31 No. 1 Trisakti Banjarmasin (2019) Jurnal Edisi Anastasia Caroline Jurnal HPJI Vol. 4; Nama Sutandi, Ir., M.T., No. 2 Ph.D. (2018)

Penulis Tilaka Wasanta, Fakultas Jurusan Nama Ke S.T., M.T.

Teknik Teknik 1 Penulis Fakultas Jurusan Sipil Ke Penulis Prof. Wimpy Santosa, Teknik Teknik 1 UNPAR Ir., M.Eng., MSCE., Sipil Ph.D.

88 Pengaruh Jarak Sensor Persepsi Pengguna Lendutan Terhadap Terhadap Angkutan Modulus Resilien Online Di Kota Bandung Tanah Dasar 34 Jurnal Edisi 32 Jurnal Edisi Jurnal Vol. Jurnal HPJI Vol. 5; Transportasi 18; No. No. 1, 3 Januari (2018) 2019 Tri Basuki Joewono, Nama Tilaka Wasanta, Ph.D. Nama S.T., M.T. Penulis Fakultas Jurusan Penulis Ke Fakultas Jurusan Ke Teknik Teknik 2 Teknik Teknik 1 Sipil Sipil

Penyelenggaraan Pemilihan Lokasi Perizinan Pemanfaatan Belanja dan Perilaku Bagian-Bagian Jalan Perjalanan di Kota Nasional Bandung 33 35 Jurnal Edisi Jurnal Edisi Jurnal Vol. Jurnal Vol 19 Transportasi 18; No. Transportasi No 1 2, 2019 (2019)

Tilaka Wasanta, S.T., Tri Basuki Joewono, Nama Nama M.T. Ph.D.

Penulis Penulis Fakultas Jurusan Fakultas Jurusan Ke Ke Teknik Teknik 2 Teknik Teknik 2 Sipil Sipil

Penulis Prof. Wimpy Santosa, Penulis Muhamad Rizki, S.T., UNPAR Ir., M.Eng., MSCE., UNPAR M.T. Ph.D.

Kajian Spasial Lokasi Revolusi Industri 4.0 Berbelanja Di Kota dan Respon Institusi Bandung Pendidikan Dasar dan Menengah 36 Jurnal Edisi 38 Jurnal Vol. Jurnal Edisi Transportasi 19; No. Jurnal Vol. 2, Pendidikan 17; (2019) Penabur No. 31 (2018) Tri Basuki Joewono, Nama Ph.D. Dr. Ali Sadiyoko, Nama M.T. Penulis Fakultas Jurusan Ke Penuli Fakultas Jurusan Teknik Teknik 1 s Ke Sipil Teknologi Teknik 2 Industri Elektro Konsentrasi Industry 4.0: Mekatronik a Pengaruhnya Terhadap Rencana Strategis Penulis Christian Fredy Naa, Pengembangan Jangka UNPAR M.Si., M.Sc. Panjang Teknik 37 Mekatronika UNPAR Desain dan Purwarupa Jurnal Edisi Fuzzy Logic Control untuk Pengendalian Jurnal Otomasi Vol. Suhu Ruangan Kontrol dan 10; No. 39 Instrumentasi 2 (2018) Jurnal Edisi Jurnal Vol. 2; Nama Dr. Ali Sadiyoko, M.T. Teknologi No. 1 (2018) Penulis Rekayasa Fakultas Jurusan Ke Nama Faisal Wahab, S.Pd., M.T. Teknologi Teknik 1 Penulis Industri Elektro Fakultas Jurusan Konsentrasi Ke Mekatronika Teknologi Teknik 1 Industri Elektro Penulis Christian Fredy Naa, Konsentrasi UNPAR M.Si., M.Sc. Mekatronika

90 Desain Awal Pembuatan Menentukan Prediksi Glider Autonomous Margin Kestabilan Underwater Vehicle Tegangan Secara Online (AUV) Parahyangan Dengan Menggunakan 40 Phasor Measurement Jurnal Edisi 42 Unit Jurnal Vol. 4; Teknologi No.1 Jurnal Edisi Rekayasa (2019) Jurnal Vol. 11; Teknologi No. Faisal Wahab, S.Pd., 2,(2019) Nama (Jurtek) M.T. Levin Halim, S.T., Penulis Nama Fakultas Jurusan M.T. Ke Teknolog Teknik 1 Penulis Fakultas Jurusan i Industri Elektro Ke Konsentrasi Teknologi Teknik 1 Mekatronika Industri Elektro Konsentrasi Mekatronika

Desain Sistem Pendayaan Energi Listrik Perancangan Sistem pada Rumah Kaca Pintar Communication-Based dengan Menggunakan Train Control (CBTC) Pembangkit Listrik Berbasis Sensor Fusion Tenaga Surya 43 Jurnal Edisi 41 Jurnal Edisi Jurnal Otomasi Vol. 10; RESISTOR Vol 2; Kontrol dan No. 2 (elektRonika No 1 Instrumentasi (2018) (2019) kEndali Tua Agustinus Tamba, Nama telekomunikaSI Ph.D. tenaga liSTrik Penulis kOmputeR) Fakultas Jurusan Ke Nama Levin Halim, S.T., M.T. Teknologi Teknik 4 Industri Elektro Penulis Fakultas Jurusan Konsentrasi Ke Mekatronika Teknologi Teknik 1

Industri Elektro Konsentrasi Mekatronika

Penulis Christian Fredy Naa, UNPAR M.Si., M.Sc.

Implementasi Kontrol Penerapan Metode Job Umpan Balik Keluaran Safety Analyisis and Berbasis Tapis Kalman Risk Score untuk dan Regulator Kuadratik Meningkatkan Linier pada Sistem Keselamatan dan 44 Pendulum Terbalik Kesehatan Kerja pada Departemen Printing, Jurnal Edisi Sewing, dan Assembly Jurnal Otomasi Vol. 46 PT. PAI, bandung Kontrol dan 11; (Suatu Pendekatan No. 2, Instrumentasi Participatory (2019) Ergonomic) Tua Agustinus Tamba, Nama Jurnal Edisi Ph.D. Jurnal Vol. 9; Penulis Fakultas Jurusan Kesehatan No. 3 Ke (2018) Teknologi Teknik 3 Dr. Paulus Sukapto, Industri Elektro Nama Konsentrasi Ir., MBA. Mekatronika Penulis Fakultas Jurusan Ke

Teknologi Teknik 1 Industri Industri Optimizing Inventory for Chicken Egg Penulis Dr. Harjoto Livestock Industry UNPAR Djojosubroto

45 Jurnal Edisi Penerapan Do It Method Jurnal Vol. 8; Untuk Meningkatkan Rekayasa No. 1, (2019) Kesedaran Sistem Keselamatan Dan Industri Kesehatan Kerja Cherish Rikardo, 47 Nama Jurnal Edisi S.Si., M.T. Jurnal Vol. 9; Penulis Fakultas Jurusan Kesehatan No. 2 Ke Medika (2018) Teknologi Teknik 1 Saintika Industri Industri Dr. Paulus Sukapto, Penulis Alfian Tan, S.T., M.T. ; Nama UNPAR Paulina Kus Ariningsih, Ir., MBA. S.T., M.Sc. Penulis Fakultas Jurusan Ke Teknologi Teknik 1 Industri Industri

92 Penerapan Pengembangan Model Participatory Blood Mobile Collection Ergonomics dalam Routing Problem Perancangan Ulang (BMCRP) pada Proses Permainan Buggy untuk Pengumpulan Darah Meningkatkan 50 Keselamatan bagi Jurnal Edisi Pengguna: Studi Kasus Jurnal Vol. 7; No. 48 di Kampung Gajah Rekayasa 2 (2018) Wonderland Sistem Industri Jurnal Edisi Titi Iswari, S.T., MBA., Vol. Nama Kes Mas: M.Sc. Jurnal 13; No. Fakultas 1 Penulis Ke (2019) Fakultas Jurusan Kesehatan Masyarakat Teknologi Teknik 1 Industri Industri Dr. Paulus Sukapto, Nama Ir., MBA. Penulis Dr. Carles Sitompul, UNPAR S.T., M.T., MIM; Fran Penulis Fakultas Jurusan Setiawan, S.T., M.Sc. Ke

Teknologi Teknik 1 Industri Industri Pengembangan Kemasan Makanan untuk Aplikasi Terapi Wicara Menghasilkan User bagi Remaja Experience yang Positif: Penyandang Disabilitas Studi Kasus pada Salah Intelektual Ringan 51 Satu UMKM Makanan di Kota Bandung

49 Jurnal Edisi Jurnal Edisi Jurnal Vol. 18 Optimasi No. 1 Jurnal Vol. 3; no 2 Sistem (2019) Ergonomi dan Industri K3 Dr. Thedy Yogasara, Nama Yansen Theopilus, S.T., M.T. Nama ST, M.EngSc Fakultas Jurusan Penulis Ke Fakultas Jurusan Penulis Ke Teknologi Teknik 1 Teknologi Teknik 1 Industri Industri Industri Industri Penulis Kristiana Asih Damayanti, UNPAR S.T., M.T.; Dr. Thedy Yogasara, ST., M.Eng.Sc.; Paulina Kus Ariningsih, S.T., M.Sc.

Pengembangan Alat Model Numerik Bantu Material handling Absorpsi Gas Reaksi untuk Meminimasi Orde Dua Tak Beban Kerja Operator Reversibel Produksi Crank Case di 54 Jurnal Edisi 52 PT X Jurnal Vol. 7; Jurnal Edisi Integrasi No. 2 Jurnal Vol. 7; Proses (2018) No. 2 Rekayasa Putri Ramadhany (2018) Nama Sistem S.T., M.Sc., PDEng Industri Penulis Yansen Theopilus, Fakultas Jurusan Nama Ke S.T., M.T. Teknologi Teknik 1 Penulis Industri Kimia Fakultas Jurusan Ke

Teknologi Teknik 1 Karakateristik Industri Industri Antioksidan Pada Kelopak Bunga Rosella

55 Jurnal Edisi Management of technology transfer Jurnal Vol.2; No. 3, into the traditional Rekayasa 2018 soybean industries Hijau 53 Dra. Maria Inggrid Jurnal Edisi Nama M.Sc. Jurnal Kimia 20 Penulis Terapan (2019), Fakultas Jurusan Ke Indonesia p 69- 78 Teknologi Teknik 1 Prof. Dr. Ir. Ign Industri Kimia Nama Suharto, APU Penulis Yansen Hartanto S.T., UNPAR M.T Penulis Fakultas Jurusan Ke Teknologi Teknik 1 Industri Kimia

Penulis Ir. YIP Arry Miryanti, UNPAR Msi

94 Kinetika Ekstraksi Zat dengan All-Units Warna Antosianin Dari Discount dan Kendala Bunga Rosella Kapasitas Gudang

56 Jurnal Edisi 58 Jurnal Edisi Jurnal Vol. 7, Perdorma Vol. Integrasi No. 2 17; Proses (2018) No. 1 (2018) Dra. Maria Inggrid Nama Dr. J. Dharma M.Sc. Nama Lesmono Penulis Fakultas Jurusan Penulis Ke Fakultas Jurusan Ke Teknologi Teknik 3 Teknologi Matematika 2 Industri Kimia Informasi Penulis Yansen Hartanto S.T., dan Sains UNPAR M.T

Pengembangan Metode Pengembangan mata Eksperimen Fisika kuliah industri kimia Berbasis Komputer berkelanjutan dengan pada Topik Kinematika metode pembelajaran Gerak Pegas berbasis masalah 59 57 Jurnal Edisi Jurnal Edisi Jurnal Vol. Jurnal Vol. Penelitian 10; No. Pendidikan 07; No. Pembelajaran 02 (2019) Sains 02 Fisika (2019) Philips Nicolas Hans Kristianto, ST., Nama Nama Gunawidjaja, B.Sc. MT. (Hons), Ph.D. Penulis Fakultas Jurusan Penulis Ke Fakultas Jurusan Ke Teknologi Teknik 1 Industri Kimia Teknologi Fisika 1 Informasi Penulis Yos Tri Atmodjo, Ir., dan Sains UNPAR M.M. Penulis Risti Suryantari, S.Si., UNPAR M.Sc.

PUBLIKASI KARYA ILMIAH PADA MEDIA NON ILMIAH INTERNASIONAL

Ketidakjelasan Kriteria Urgensi Kriminalisasi Penodaan Agama Perdagangan dalam Pasal 156 huruf Pengaruh dalam a KUHP: Quo Vadis Lex Pembaharuan Hukum 1 Certa? 3 Pidana

Media Edisi Media Edisi Hukum 16 Hukum 21 Januari 2019 Online September Online 2018 Nama Nefa Claudia Meliala, Nama Nefa Claudia Meliala, S.H.,M.H. S.H.,M.H. Fakultas Jurusan Fakultas Jurusan Hukum Ilmu Hukum Hukum Ilmu Hukum

Quo Vadis Penegakan Berkaca dari Kasus Hukum di Wilayah Nuril, UU ITE Masih Overlapping Claim Rawan Kriminalisasi Perbatasan Maritim RI 2 dengan Negara Media Edisi 4 Tetangga Hukum 10 Online Desember Media Edisi 2018 Hukum 15 Mei Online 2019 Nama Nefa Claudia Meliala, S.H.,M.H. Adrianus Adityo Vito Fakultas Jurusan Nama Ramon, S.H., Hukum Ilmu Hukum LL.M(Adv) Fakultas Jurusan Hukum Ilmu Hukum

Beberapa Catatan Mengenalkan Mengenai Tindak Teknologi Robotika Pidana Makar dalam kepada Generasi 5 KUHP 6 Milenial Garut Media Edisi Media Edisi Hukum 22 Mei Pikiran 10 Oktober Online 2019 Rakyat 2019

Nama Nama Nefa Claudia Meliala, Dr. Ali Sadiyoko S.H.,M.H. Fakultas Jurusan Fakultas Jurusan Teknologi Teknik Elektro Hukum Ilmu Hukum Industri Konsentrasi Mekatronika

PUBLIKASI KARYA ILMIAH PADA MEDIA NON ILMIAH NASIONAL

Palm Oil Futures: “Digital diplomacy: Youth Perceptions in Engage online for Indonesia survival, or be 1 ignored” Media Edisi 3 Asia 5 Juni Media Edisi Dialogue 2019 The 11 Oktober Jakarta 2019 Ratih Indraswari, Nama Post S.IP., MA. Anggia Valerisha, Fakultas Jurusan Nama S.IP., M.Si. Ilmu Sosial dan Ilmu Ilmu Politik Hubungan Fakultas Jurusan Internasional Ilmu Sosial dan Ilmu Hubungan Ilmu Politik Internasional Fostering ASEAN Centrality in the Indo- Pacific Region 2 Media Edisi ASEAN 8 Agustus

Insights 2019

Idil Syawfi, S.IP., Nama M.Si.

Fakultas Jurusan Ilmu Sosial dan Ilmu Ilmu Politik Hubungan Internasional

BAB 3: BUKU DAN BAB DALAM BUKU

BUKU-BUKU LPPM 2019

Anak Keren Anti-Korupsi

1 Penerbit Tahun Andi 2019

Nama Prof. Dr. Hamfri Djajadikerta Fakultas Jurusan Ekonomi Akuntansi Penulis UNPAR Dr. Sylvia Fettry Elvira Maratno, S.E., S.H., M.Si., Ak.; Damajanti Tanumihardja, S.E., M.Ak.

Analisis Laporan Keuangan

2 Penerbit Tahun Erlangga 2019

Nama Dr. Elvy Maria Manurung, S.E., Ak., M.T. Fakultas Jurusan Ekonomi Manajemen Penulis UNPAR

100 Malaikat Kecilku

3 Penerbit Tahun Kanisius 2019

Nama Bernardus Ario Tejo Sugiarto, S.S., M.Hum. Fakultas Jurusan Filsafat Ilmu Filsafat

Penulis UNPAR

Kebudayaan dan Kondisi Post - Tradisi 4 Penerbit Tahun Kanisius 2019

Nama Prof. Dr. Ignatius Bambang Sugiharto

Fakultas Jurusan Filsafat Ilmu Filsafat Penulis UNPAR

Hukum Pasar Modal 5 Penerbit Tahun Nuansa Aulia 2019

Nama Dr. Sentosa Sembiring, S.H., M.H. Fakultas Jurusan Hukum Ilmu Hukum Penulis UNPAR

101

Hukum Pengangkutan Laut

6 Penerbit Tahun Nuansa Aulia 2019

Nama Dr. Sentosa Sembiring, S.H., M.H.

Fakultas Jurusan Hukum Ilmu Hukum Penulis UNPAR

Hukum Internasional, Hukum Nasional, & Indonesia 7 Penerbit Tahun UNPAR Press 2018

Nama Dr. Tristam Pascal Moeliono, S.H., M.H., LL.M. Fakultas Jurusan Hukum Ilmu Hukum

Penulis UNPAR John Anthony Manogari Tobing, SH., LL.M., ACIArb.; Adrianus Adityo Vito Ramon, S.H., LL.M(Adv)

102 Perjanjian Internasional Di Dalam Hukum Nasional 8 Indonesia

Penerbit Tahun Yrama Widya 2019

Nama I Wayan Parthiana, S.H., M.H. Fakultas Jurusan Hukum Ilmu Hukum Penulis UNPAR

Susunan dan Kedudukan Pemerintah Pusat, Pemerintah di Daerah, serta Peradilan pada 9 Masa Hindia Belanda Penerbit Tahun UNPAR 2018 Press

Nama Prof. Dr. Koerniatmanto Soetoprawiro, S.H, M.H. Fakultas Jurusan Hukum Ilmu Hukum Penulis UNPAR

103

Bandung Kota Cerdas Pangan - Produksi dan Konsumsi Pangan Yang 10 Bertanggung Jawab Untuk Keberlanjutan Bumi

Penerbit Tahun FISIP UNPAR 2019

Nama Dr. Pius Sugeng Prasetyo, M.Si.

Fakultas Jurusan Ilmu Sosial dan Ilmu Ilmu Administrasi Politik Publik Penulis UNPAR Dr. Theresia Gunawan, S.Sos. MM., M.Phil.; Tutik Rachmawati, S.I.P., M.A., Ph.D; Daniel Hermawan, S.AB., M.Si., MBA.

Inovasi Pengembangan Ekonomi Desa Berbasis Potensi Lokal 11 Penerbit Tahun Friedrich Ebert Stiftung 2018 (FES) Indonesia Nama Dr. Pius Sugeng Prasetyo, M.Si. Fakultas Jurusan Ilmu Sosial dan Ilmu Ilmu Administrasi Politik Publik Penulis UNPAR Tutik Rachmawati, S.I.P., M.A., Ph.D; Daniel Hermawan, S.AB., M.Si.,

MBA.; Trisno Sakti Herwanto, S.IP., MPA.; Albert Mangapul Parulian Lumban Tobing, S.T., M.AB.; Yosefa, S.T., M.M.

104

Desain Pencahayaan Buatan dalam Arsitektur 12 Penerbit Tahun Kanisius 2018

Nama E. B. Handoko Sutanto, Ir., M.T. Fakultas Jurusan Teknik Arsitektur Penulis UNPAR

Struktur Kayu - Analisis dan Desain dengan LRFD 13 Penerbit Tahun Rosda 2018

Nama Prof. Bambang Suryoatmono, Ph.D. Fakultas Jurusan Teknik Teknik Sipil Penulis UNPAR

Optimasi Rantai Pasok: Formulasi dan Solusi 14 Penerbit Tahun Deepublish 2019

Nama Dr. Carles Sitompul, S.T., M.T., MIM

Fakultas Jurusan Teknologi Industri Teknik Industri Penulis UNPAR

105

Alat dan Mesin dalam Sistem Rantai Pangan 15 Penerbit Tahun UNPAR Press 2018

Nama Prof. Dr. Ignatius Suharto, Ir., APU.

Fakultas Jurusan Teknologi Industri Teknik Kimia Penulis UNPAR

106 BAB DALAM BUKU NASIONAL

Seni Merayakan Liturgi Bersama Ceremoniarius

Judul Buku 1 Estetika Liturgis: Wujud Keindahan dan Kekudusan

Penerbit Tahun Kanisius 2019 Nama C. Harimanto Suryanugraha, OSC., Drs., SLL.

Fakultas Jurusan Filsafat Ilmu Filsafat

Menjaga Keutuhan Liturgi Ekaristi

Judul Buku 2 Merayakan Misteri

Penerbit Tahun Kanisius 2019

Nama C. Harimanto Suryanugraha, OSC., Drs., SLL.

Fakultas Jurusan Filsafat Ilmu Filsafat

Membangun Teologi Lokal-Kontekstual ala "Koki Dusun"

Judul Buku 3 Kearifan Lokal Kultur yang Dirayakan

Penerbit Tahun Kanisius 2019 Nama Dr. Fransiskus Borgias, Drs., M.A.

Fakultas Jurusan Filsafat Ilmu Filsafat

107

Teologi Ruang: Menelusuri Sinyal Transendensi

Judul Buku 4 Estetika Liturgis: Wujud Keindahan dan Kekudusan

Penerbit Tahun Kanisius 2019

Nama Dr. Fransiskus Borgias, Drs., M.A. Fakultas Jurusan Filsafat Ilmu Filsafat

“Musik untuk Memuliakan Allah dan Menguduskan Manusia: Sebuah Eksplorasi Teologis-Fenomenologis”

Judul Buku 5 Estetika Liturgis: Wujud Keindahan dan Kekudusan

Penerbit Tahun Kanisius 2019 Nama Dr. Hadrianus Tedjoworo, OSC., S.Ag., S.TL.

Fakultas Jurusan Filsafat Ilmu Filsafat

Ekaristi Membangun Gereja: Imaji Tubuh Mistik Kristus

Judul Buku 6 Merayakan Misteri

Penerbit Tahun Kanisius 2019

Nama Dr. Hadrianus Tedjoworo, OSC., S.Ag., S.TL. Fakultas Jurusan Filsafat Ilmu Filsafat

108 Liturgi sebagai Karya Seni

Judul Buku 7 Estetika Liturgis: Wujud Keindahan dan Kekudusan

Penerbit Tahun Kanisius 2019 Nama Dr. Ignatius Eddy Putranto, OSC., S.Ag., M.A. Fakultas Jurusan Filsafat Ilmu Filsafat

Liturgi Allah Tritunggal

Judul Buku 8 Merayakan Misteri

Penerbit Tahun Kanisius 2019

Nama Dr. Ignatius Eddy Putranto, OSC., S.Ag., M.A. Fakultas Jurusan Filsafat Ilmu Filsafat

Agama Tanpa Tuhan: Perspektif Ilmiah

Judul Buku 9 Kearifan Lokal Kultur yang Dirayakan

Penerbit Tahun Kanisius 2019

Nama Dr. Stephanus Djunatan Fakultas Jurusan Filsafat Ilmu Filsafat

109

Alat Komunikasi Sosial sebagai Sarana Penyampaian Iman dan Nilai - Studi atas Dokumen KWI

Judul Buku 10 Gereja Yang Adalah Ragi - Peta Eklesiologi Menurut Dokumen KWI (Jilid 2)

Penerbit Tahun Obor 2019 Nama Dr. theol. Leonardus Samosir, OSC.

Fakultas Jurusan Filsafat Ilmu Filsafat

Merayakan Misteri

Judul Buku 11 Merayakan Misteri

Penerbit Tahun Kanisius 2019

Nama Dr. theol. Leonardus Samosir, OSC. Fakultas Jurusan Filsafat Ilmu Filsafat

Liturgi Sakral yang Indah, Liturgi Indah yang Sakral

Judul Buku 12 Estetika Liturgis: Wujud Keindahan dan Kekudusan

Penerbit Tahun Kanisius 2019 Nama Fabianus Sebastian Heatubun, Pr., Drs., SLL. Fakultas Jurusan Filsafat Ilmu Filsafat

110 Harmoni: Nada Dasar dalam Keragaman

Judul Buku 13 Kearifan Lokal Kultur yang Dirayakan

Penerbit Tahun Kanisius 2019 Nama Onesius Otenieli Daeli, OSC., S.S., M.Hum., Ph.D. Fakultas Jurusan Filsafat Ilmu Filsafat

Musik Sakral, dalam Ritual, Religius: Perspektif Antropologi Budaya

Judul Buku 14 Estetika Liturgis: Wujud Keindahan dan Kekudusan

Penerbit Tahun Kanisius 2019

Nama Onesius Otenieli Daeli, OSC., S.S., M.Hum., Ph.D.

Fakultas Jurusan Filsafat Ilmu Filsafat

Musik, Estetik, dan Mistik

Judul Buku 15 Estetika Liturgis: Wujud Keindahan dan Kekudusan

Penerbit Tahun Kanisius 2019 Nama Prof. Dr. Ignatius Bambang Sugiharto Fakultas Jurusan Filsafat Ilmu Filsafat

111

"Lakukanlah Ini Untuk Mengenang Daku" [Yoh. 13-15]: Perintah Baru Mewujudnyatakan Ekaristi dalam Hidup sehari-hari

16 Judul Buku Merayakan Misteri

Penerbit Tahun Kanisius 2019 Nama R. Fransiskus Bhanu Viktorahadi, Pr., S.Ag., L.Th. Fakultas Jurusan Filsafat Ilmu Filsafat

Ketika yang Digital Merumuskan Kebenaran

Judul Buku 17 Buku Merawat Kebangsaan

Penerbit Tahun Kanisius 2019 Nama Willfridus Demetrius Siga, S.S., M.Pd. Fakultas Jurusan Filsafat Ilmu Filsafat

Mengetahui Kualitas Pembangunan Desa Melalui Analisis Data Dasar Keluarga: Pembelajaran dari Desa Mekarwangi

Judul Buku 18 Membangun Basis Data Bagi Pembangunan Desa Melalui Kuliah Kerja Lapangan (KKL)

Penerbit Tahun Prodi Ilmu Administrasi Publik UNPAR dan KOMPAK 2018 Nama Trisno Sakti Herwanto, S.IP., MPA.

Fakultas Jurusan Ilmu Sosial dan Ilmu Politik Ilmu Administrasi Publik

112

Feminisasi Pekerja Migran Perempuan Indonesia: Perspektif Internasional

Judul Buku 19 Gender dalam Hubungan Internasional di Indonesia - Australia

Penerbit Tahun Kanisius 2019 Nama Elisabeth Adyiningtyas Satya Dewi, S.IP., M.A., Ph.D. Fakultas Jurusan Ilmu Sosial dan Ilmu Politik Ilmu Hubungan Internasional

113

BAB DALAM BUKU INTERNASIONAL

Indonesian Arbitration Law And Practice In Light Of The UNCITRAL Model Law

Judul Buku 1 The UNCITRAL Model Law and Asian Arbitration Laws: Implementations and Comparisons

Penerbit Tahun Cambridge University Press 2018 Nama John Anthony Manogari Tobing, SH., LL.M., ACIArb. Fakultas Jurusan Hukum Ilmu Hukum

Collaborative Efforts in Internationalization of a Private University: Lesson from UNPAR and ACICIS in Indonesia

Judul Buku 2 Internationalization of Higher Education: The Dynamics of Educational Ecology

Penerbit Tahun Manipal Universal Press 2019 Nama Ratih Indraswari, S.IP., MA. Fakultas Jurusan Ilmu Sosial dan Ilmu Politik Ilmu Hubungan Internasional

114 Cultural Relations of the Alun-Alun Space and the Government Complex in Contemporary Java - Transformation and Adaptation of Spatial and Elements of Alun-alun

3 Judul Buku Advances in Science, Technology & Innovation (ASTI)- Urban and Transit planning

Penerbit Tahun Springer 2019 Nama Dr. Ir. Yohanes Karyadi Kusliansjah, M.T.. IAI. Fakultas Jurusan Teknik Arsitektur

Mobility and Health: The Interaction of Activity-Travel Patterns, Overall Well-Being, Transport-Related Social Exclusion on Health Parameters

4 Judul Buku Energy Efficiency in Mobility Systems

Penerbit Tahun Springer 2019 Nama Tri Basuki Joewono, Ph.D. Fakultas Jurusan Teknik Teknik Sipil

115

BAB 4: SEMINAR INTERNASIONAL DAN NASIONAL

BANTUAN SEMINAR LUAR NEGERI – KEMENRISTEKDIKTI

Design The Learning Process for Millennial Students In Higher Education

Nama Kegiatan Tempat 1 28th Eurasia Business and Economics Society Britania Raya (EBES) Conference Coventry Waktu Penyelenggara 29-31 Mei 2019 Coventry University

Abstrak Millennials students have many choices for learning. Classical learning is no longer the best. Preliminary research shows that millennials students do not want to study in campus or library any longer, due a tedious and stressful atmosphere. A hundred and eighty-eight respondents previously interviewed, said that they choose café or restaurants as a place to studying while they’re eating, due to them learning spaces on campus are not enough. The campus learning environment - which is nuanced seriously and gives the impression that the atmosphere is 'rushed' and 'chased deadline' - has a serious impact on this millennials students in Bandung. They suffer from stress and then prefer learning at the café to complete their tasks, rather than on campus or at home. Café as a new and informal study room turns out to have a pretty good influence on their learning process. From the teacher's side, the role of a teacher is not only in the spread of knowledge in one direction. He must be able to run a teaching and learning process that involves his students significantly. This is an ongoing qualitative research that will be done by several observation and interviews. The aim of this study are to review about, (i) what kind of atmosphere can lead to the desire to study among students today?, (ii) What learning processes are

116 experienced as effective by them?, and (iii) what kind of learning design is needed related to that?

Nama Dr. Elvy Maria Manurung, S.E., Ak., M.T. Fakultas Jurusan Ekonomi Ilmu Manajemen

BEST PRESENTER / BEST PAPER

The Methods of Cultivating Pelatihan Software Awareness to Avoid the Perkantoran Bagi Pembina Behavior Seeds of Wanita Katolik Republik Fraudulent and Corruption Indonesia (WKRI) for Junior and Senior High Seminar Nasional School Pengabdian Kepada Simposium Ilmiah 2 Masyarakat dan Pameran Akuntansi III "Profesi Produk Unggulan Tahun Akuntan di Era Revolusi 2019 Industri 4.0" 1 Penyelenggara Penyelenggara Universitas Mataram Forum Dosen Akuntansi Mataram, 26 September Perguruan Tinggi Sumatera Utara 2019 - Ikatan Akuntan Indonesia Kompartemen Akuntan Pendidik Tanto Kurnia, S.T., bekerjasama dengan Ikatan Nama M.A., M.Ak. Akuntan Indonesia Wilayah Sumut dan Fakultas Ekonomi Ekonomi / Ilmu Akuntansi Universitas Methodist Indonesia Medan, 28 November 2019 Kategori Best Presenter Dr. Sylvia Fettry Elvira Nama Maratno, S.E., S.H., M.Si., Ak.

Ekonomi / Ilmu Akuntansi Kategori Best Presenter I

117

"Eating and Studying: New A Meaningful Changein Behavior Students in Indonesian Small and Learning" Medium Scale Enterprise: "2nd International Human Entrepreneurship Conference on Global Approach Education and E-Learning" 5 the 64th Annual ICSB World Congress 3 Penyelenggara Global Education and Learning, Penyelenggara The International Institute of ICSB International Knowledge Management, Cairo, Egypt, 18-21 Juni 2019 University of Sri Jayewardenepura Sri Lanka Dr. Margaretha Nama Kuala Lumpur, Malaysia, 12-13 Banowati Talim, Dra., November 2018 M.Si. Dr. Elvy Maria Ilmu Sosial dan Ilmu Politik / Ilmu Nama Manurung, S.E., Ak., Administrasi Bisnis M.T. Kategori Best Paper Ekonomi / Ilmu Manajemen Kategori Best Presenter Application of Pigeon Inspired Optimization for Multidimensional Knapsack Marketing Innovation in Problem Industry 4.0: Experiential The 8th International Marketing Practices in the Conference on Global Cullinary Industry Optimization and Its 4 ICBEEM 6 Applications 2019

Penyelenggara Penyelenggara Universitas Pembangunan Universiti Tun Hussein Onn Nasional “Veteran” Yogyakarta Malaysia (UTHM) dan Indonesian Yogyakarta, 9-10 Oktober 2019 Operations Research Association (IORA) Daniel Hermawan, Nama Kuala Lumpur, Malaysia, 23-24 S.AB., M.Si., MBA. November 2019 Ilmu Sosial dan Ilmu Politik / Ilmu Fran Setiawan, S.T., Administrasi Bisnis Nama M.Sc., Dr. Ali Sadiyoko, Kategori Best Presenter S.T., M.T., Christian Setiardjo

Teknologi Industri / Teknik Industri Kategori Best Paper

118

Assessment of Proposed Preliminary Study on Container Loading Tamarindus Indica Seeds Algorithm for Forward and Kernel as Natural Reverse Logistics of One Coagulant for Color Door Container Upon Large Removal of Synthetic Data Textile Wastewater International Conference International On Business, Accounting, Conference on 7 9 Supply Chain and Logistics Sustainable Engineering 2019 and Creative Computing (ICSECC) 2019 Penyelenggara Fakultas Ekonomi Bisnis Penyelenggara Universitas Sebelas Maret Faculty of Engineering, Surakarta President University Surakarta, 21-22 November Bandung, 20-22 Agustus 2019 2019 Paulina Kus Ariningsih, Nama Nama Hans Kristianto, ST., S.T., M.Sc. MT.

Teknologi Industri / Teknik Industri Teknologi Industri / Teknik Kimia Kategori Best Paper Kategori Best Presenter

Analisis Customer Experience Wanita Milenial

pada Retail Kosmetik X Menggunakan Eye Tracking dan In-Depth Interview 8 SemNas Perhimpunan

Ergonomi Indonesia

Penyelenggara Perhimpunan Ergonomi Indonesia Surabaya, 6-7 November 2019

Nama Yansen Theopilus, S.T., M.T.

Teknologi Industri / Teknik Industri

Kategori Best Presenter

119

PERTEMUAN ILMIAH LUAR NEGERI

The Influence of Audit The Determinants of Opinion on The Financial Students' Intention to Independence of Regional Conduct Fraud on Government of West Java Assignments and (Indonesian Case) Examinations 2nd International SIBR- Thammasat 2019 Conference on Challenges Conference on 3 1 & Opportunities in Interdisciplinary Business Economics, Management, and Economics Research and Multidisiplinarity Social Sciences Perspective Penyelenggara Thammasat University & Penyelenggara Association for Asian Studies Vertex Research Society Bangkok – Thailand, 9-10 Juni Bangkok – Thailand, 11-12 2019 Maret 2019 Prof. Dr. Hamfri Nama Djajadikerta, Drs., Ak. , Nama Dr. Elizabeth Tiur Manurung, M.Si., Ak. M.M. Ekonomi / Ilmu Akuntansi Ekonomi / Ilmu Akuntansi Peran Pemakalah Peran Pemakalah

Perception of High School Students against Fraud and A Non-Linear Relationship Corruption: Survey in West between Banking Java Province - Indonesia Competition and Risk 28th EBES Conference - Taking: An Evidence from Conventry Indonesia 2 The 18th International Penyelenggara Conference of the Japan 4 Euroasia Business and Economic Policy Economics Society (EBES) Association dengan Universitas Coventry UK Coventry - United Kingdom, 29- Penyelenggara 31 Mei 2019 Japan Economic Policy Dr. Sylvia Fettry Elvira Association Nama Maratno, S.E., S.H., Tokyo – Japan, 16-17 M.Si., Ak. November 2019 Ekonomi / Ilmu Akuntansi Nama Charvin Lim, S.E., M.Sc. Peran Pemakalah Ekonomi / Ilmu Ekonomi Peran Pemakalah

120

The Design of Innovative The Importance of Universities Services in Economic Openness on Indonesia Using Starbucks Technical Efficiency in Concepts Global Perspective SIBR- Thammasat 2019 Conference on The 18th International 7 Conference of the Japan Interdisciplinary Business 5 Economic Policy and Economics Research Association Penyelenggara Penyelenggara Thammasat University & Association for Asian Studies Japan Economic Policy Association Bangkok – Thailand, 9-10 Juni 2019 Tokyo – Japan, 16-17 Nama Rizka Nugraha November 2019 Pratikna, S.E., M.M. Ivantia Savitri Ekonomi / Ilmu Manajemen Nama Mokoginta, S.E., MBA., Peran Pemakalah M.A., Ph.D.

Ekonomi / Ilmu Ekonomi

Peran Pemakalah The Importance of Digital

Trust in E-Commerce: Design Thinking for Start Up Between Brand Image and Business Design and Customer Loyalty Entrepreneurship 2nd International Education Conference on Business, 2nd International 8 Management and Finance Conference on Practical (ICBMF) Issues in Social Science, Penyelenggara 6 Economics & Business Studies: Role of Recent ICBMFCONF Organizing Innovations Committees Paris – France, 22-24 November Penyelenggara 2019 The Vertex Research Society Daniel Hermawan, (VRS) Nama S.AB., M.Si., MBA. Bangkok – Thailand, 11-12 September 2019 Ilmu Sosial dan Ilmu Politik / Ilmu Administrasi Bisnis Nama Lilian Danil, SE., MM. Peran Pemakalah Ekonomi / Ilmu Manajemen Peran Pemakalah

121

A Meaningful in Indonesian Indonesian Women Small and Medium Scale Migrant Workers: Standing Enterprise : Human in the Midst of Femininity Entrepreneurship Approach and Masculinity 9 ICSB World Congress EUROSEAS 2019 11 Penyelenggara Penyelenggara ICSB World European Association for Cairo Egypt, 18-21 Juni 2019 Southeast Asian Studies Berlin – Germany, 9-14 Nama Dr. Margaretha September 2019 Banowati Talim Elisabeth Adyiningtyas Ilmu Sosial dan Ilmu Politik / Ilmu Nama Administrasi Bisnis Satya Dewi, S.IP., M.A., Ph.D. Peran Pemakalah Ilmu Sosial dan Ilmu Politik / Ilmu Hubungan Internasional Digital Politics and Peran Pemakalah Democracy in Indonesia (Case Study: The Use of Social Media during From and To: How the Presidential Campaign Youth in Asia-Pacific 2019) Facing #VAW Issue 10 Association For Asian 5th Congress of the Asian Studies (AAS-in-Asia) Association of Women’s 12 Studies 2019 Penyelenggara Penyelenggara Thammasat University & Association for Asian Studies Asian Association of Women’s Studies Bangkok – Thailand, 1-3 Juli 2019 Seoul - Korea Selatan, 6-8 Desember 2019 Nama Anggia Valerisha, S.IP., M.Si. Elisabeth Adyiningtyas Nama Satya Dewi, S.IP., M.A., Ilmu Sosial dan Ilmu Politik / Ilmu Hubungan Internasional Ph.D. Ilmu Sosial dan Ilmu Politik / Ilmu Peran Pemakalah Hubungan Internasional

Peran Pemakalah

122

The Social Media in ISIS and Security Threat in Indonesian Diplomacy Southeast Asia; The Role 13th International of Foreign Terrorist Conference on Language Fighter (FTFs) and Border Cooperation 13 Education Humanities and Innovation ASEAN Lecture Series 15 2019 Penyelenggara ICSAI Penyelenggara Osaka-Jepang, 5-6 April 2019 ASEAN Committee in Amman – Jordan Nama Sukawarsini Djelantik, Amman Yordania – Jordan, 9 Dra., M.I.S., Ph.D. Oktober 2019 Ilmu Sosial dan Ilmu Politik / Ilmu Sukawarsini Djelantik, Hubungan Internasional Nama Dra., M.I.S., Ph.D. Peran Pemakalah Ilmu Sosial dan Ilmu Politik / Ilmu Hubungan Internasional Public Opinion and Peran Invited Democracy in Indonesia : A Case Study During Joko Widodo Precidency “Indonesia-European Union Comprehensive The 72nd World Partnership Agreement, Association of Public Negotiating between the Opinion Reserch 14 Labour and the (WAPOR) Annual Environment" Conference The Korean Association Penyelenggara of Political Science and World Association of Public 16 Communication 2019 Opinion Reserch (WAPOR) Spring Academic Toronto – Canada, 19-21 Mei Conference 2019 Penyelenggara Nama Sukawarsini Djelantik, Center for Advanced Research Dra., M.I.S., Ph.D. in Integrated Future Society, Ilmu Sosial dan Ilmu Politik / Ilmu Yonsei University Hubungan Internasional Daejeon - Korea Selatan, 17 Mei 2019 Peran Pemakalah Nama Sylvia Yazid, S.IP, MPPM, Ph.D.

Ilmu Sosial dan Ilmu Politik / Ilmu Hubungan Internasional

Peran Invited

123

Islamic Populism in Preventing the Indonesia: A Form of “Thucydides Victims”: the Identity Entrepreneurship? Increasing Sino-US Rivalry Workshop on Populism and the Southeast Asians and Religion Strategic Approaches China – US Rivalry and 17 Penyelenggara the Strategic Reflections Faculty of Human Sciences and 19 and Adjustment in Theology TU Dortmund Southeast Asia University Faculty of Human Sciences Penyelenggara and Theology TU Dortmund The Center for China's Relations University, 23-24 Agustus with Neighboring Countries (CCRNC) Fudan University Nama Sylvia Yazid, S.IP, MPPM, PhD Shanghai – China, 13-16 November 2019 Ilmu Sosial dan Ilmu Politik / Ilmu Hubungan Internasional Nama Idil Syawfi, S.IP., M.Si. Peran Invited Ilmu Sosial dan Ilmu Politik / Ilmu Hubungan Internasional

Peran Invited The Challenges and Opportunities of Indonesia’s Foreign Policy Towards Pacific Island Countries Under Joko Cinematic Spaces of Widodo 2014-2019: an Lasem's Tiongkok Kecil Approach to Rosenau’s Heritage 18 Adaptive Model 16th Annual International Indonesia Council Open Conference of the Conference 20 Architectural Humanities Research Association Penyelenggara Penyelenggara Australian National University University of Dundee Canberra – Australia, 19-21 November 2019 United Kingdom - United Kingdom, 20-24 November 2019 Nama Vrameswari Omega Wati, S.IP., M.Si Nama Caecilia Srikanti Wijayaputri, S.T., M.T. Ilmu Sosial dan Ilmu Politik / Ilmu Hubungan Internasional Teknik / Arsitektur Peran Pemakalah Peran Invited Speaker

124

Evaluation of Capacity of Duriangkang Estuary Dam Performance and Modeling to Control Flood Flow of Secant Pile Reinforced EAS Workshop on by Soil Nailing for Urban Estuary Harnessing, Excavation in Jakarta Protection and 21 16th Asian Regional Management Conference on Soil Penyelenggara 23 Mechanics and Geotechnical Engineering Pearl River Water Resources Commission Penyelenggara Guang Zhou – China, 26-30 Chinese Taipei Geotechnical Agustus 2019 Society Taipei – China, 14-18 Oktober Nama Albert Wicaksono, S.T., M.T. 2019 Teknik / Teknik Sipil Nama Aswin Lim, Ph.D. Peran Invited Speaker Teknik / Teknik Sipil Peran Pemakalah ICT implementation of bus public transportation Management of Estuary towards green engineering Dam of Duriangkang to in Indonesia Enhance Water Security 7th International in Batam City Conference of Euro Asia EAS Workshop on Civil Engineering Forum Estuary Harnessing, (EACEF2019) - Green 24 Protection and 22 Engineering for Management Infrastructure and Safety Against Hazard Penyelenggara Pearl River Water Resources Penyelenggara Commission University of Stuttgart, Germany, Guang Zhou – China, 26-30 Indonesian Universities agustus 2019 Consortium Stuttgart – Germany, 28 Nama Doddi Yudianto, Ph.D. September - 4 Oktober 2019 Teknik / Teknik Sipil

Nama Anastasia Caroline Peran Invited Speaker Sutandi, Ir., M.T., Ph.D.

Teknik / Teknik Sipil Peran Pemakalah

125

Water Resources Geotechnical Failures Due Engineering, Parahyangan to Excavation in Catholic University Consolidating Soft Soils 1st International deposit Workshop on Climate Asian Regional 25 Change Adaptation Conference on Soil Mechanics and Penyelenggara 27 Geotechnical Engineering Kyung Hee University (ARC 16th) Seoul - South Korea, 14-21 September 2019 Penyelenggara Chinese Taipei Geotechnical Nama Doddi Yudianto, Ph.D. Society Teknik / Teknik Sipil Taipei – China, 14-18 Oktober 2019 Peran Keynote Speaker Nama Prof. Paulus Pramono Rahardjo, Ph.D. Geotechnical Failures Due Teknik to Construction of Embankment and Peran Invited Speaker Excavation in Under

Consolidating Soils International Symposium Design and Construction 26 on Soft Ground of Cisumdawu Tunnel, Improvement 2019 West Java, using Umbrella Grouting Protection Penyelenggara The 4th International Universiti Teknologi Malaysia Conference on dan GEOTROPIK Geotechnics for Melaka, Malaysia, 5-6 Agustus 28 Sustainable Infrastructure 2019 Development (Geotec Hanoi 2019) Nama Prof. Paulus Pramono Rahardjo, Ph.D. Penyelenggara Teknik / Teknik Sipil GEOTEC HANOI Peran Invited Speaker Taipei – China, 14-18 Oktober 2019

Nama Prof. Paulus Pramono Rahardjo, Ph.D.

Teknik / Teknik Sipil

Peran Invited Speaker

126

Why do shoppers keep On Input-to-State Stability making trip for online of Train Platoon Under shopping? Learning from Moving Block Signalling evidence in Bandung, IFAC Joint Symposium Indonesia on Mechatronics Systems Eastern Asia Society for & Nonlinear Control 29 31 Transport Studies Systems

Penyelenggara Penyelenggara Eastern Asia Society for The International Federation of Transport Studies Automatic Control (IFAC) Sri Lanka - Sri Lanka, 8-12 Vienna – Austria, 4-6 September 2019 September 2019

Nama Tri Basuki Joewono, Nama Tua Agustinus Tamba, Ph.D. Ph.D. Teknik / Teknik Sipil Teknologi Industri / Teknik Elektro Peran Pemakalah Peran Pemakalah

1. On Using Unscented The Supply Chain Kalman Filter Based Multi Integrated Inventory Model Sensors Fusion for Train for Single Product, Multi- Localization Buyer and Multi- Vendor 2. A Structural Output The 8th International Controllability Approach Conference on Global 30 to Drug Efficacy Prediction Optimization and Its 2019 12th Asian Control 32 Applications (ICoGOIA) Conference (ASCC) Penyelenggara Kitakyusyu International Universiti Tun Hussein Onn Conference Center Malaysia In collaboration with Indonesian Operations Japan 9-12 Juni 2019 Research Association (IORA)

Nama Tua Agustinus Tamba, Kuala Lumpur – Malaysia, 23- Ph.D. 24 November 2019 Teknologi Industri / Teknik Elektro Nama Cherish Rikardo, S.Si., M.T. Peran Pemakalah Teknologi Industri / Teknik Industri

Peran Pemakalah

127

Application of Pigeon Preparation of Biomass Inspired Optimization for based Carbon-Sulfur Multidimensional Composite Cathodes in Knapsack Problem Lithium Sulfur Batteries The 8th International The 2019 4th International Conference on Global Conference on Composite 33 Optimization and Its Materials and Material Applications 35 Engineering (ICCMME2019) Penyelenggara Universiti Tun Hussein Onn Penyelenggara Malaysia South Asia Institute of Science Kuala Lumpur – Malaysia, 23- and Engineering (SAISE) and 24 November 2019 Tokyo University of Science Tokyo – Japan, 19 - 22 januari Nama Fran Setiawan, S.T., 2019 M.Sc. Teknologi Industri / Teknik Industri Nama Arenst Andreas, S.T., S.Si, M.Sc., Ph.D. Peran Pemakalah Teknologi Industri / Teknik Kimia Peran Invited Speaker Blockchain Approach for Improvement of Emergency Response in Humanitarian Logistics Preparation of Biomass Indonesia based Carbon Composites as Electrodes for LiS 9th International Battery Conference on Operations 34 and Supply Chain 36 Nano Boston Conference Management Penyelenggara Penyelenggara United Scientific Group RMIT University Vietnam dan New York - United States Of Institut Teknologi Sepuluh America, 22-24 April 2019 Nopember (ITS) Arenst Andreas, S.T., Ho Chi Minh City – Vietnam, Nama 15-18 Desember 2019 S.Si, M.Sc., Ph.D. Teknologi Industri / Teknik Kimia Nama Paulina Kus Ariningsih, S.T., M.Sc. Peran Pemakalah Teknologi Industri / Teknik Industri Peran Pemakalah

128

Biomass Based Hard Electrochemical Carbons As Electrodes Characteristics of Tofu for Sodium Ion Battery waste based Porous 235th Electrochemical Carbons for LiS Battery 37 Society (ECS) Meeting The 9th Conference on Nanomaterials (CN-BT Penyelenggara 39 2019) Electrochemical Society (ECS) Penyelenggara Dalas, Texas – Amerika, 26 - 30 Mei 2019 Engineering Information Institute Arenst Andreas, S.T., Nama Bangkok – Thailand, 13-15 S.Si, M.Sc., Ph.D. Desember 2019 Teknologi Industri / Teknik Kimia Nama Arenst Andreas, S.T., Peran Pemakalah S.Si, M.Sc., Ph.D. Teknologi Industri / Teknik Kimia N-doped Porous Carbons Peran Pemakalah Derived from Tofu Waste as Cathode Components for LiS Battery The Optimal Condition on the Growth of Green KIST School ASEAN Haematococcus Pluvialis 38 Alumnae Symposium as one of the Future Penyelenggara Natural Resources Korea Institute of Science and 26th Regional Technologi 40 Symposium on Chemical Hanoi – Vietnam, 20-21 Engineering 2019 Desember 2019 Penyelenggara Arenst Andreas, S.T., Nama The Institution of Engineers, S.Si, M.Sc., Ph.D. Malaysia Teknologi Industri / Teknik Kimia Kuala Lumpur – Malaysia, 29 Oktober - 1 November 2019 Peran Invited Speaker Nama Prof. Dr. Judy Retti Witono, Ir., M.App.Sc.

Teknologi Industri / Teknik Kimia

Peran Pemakalah

129

Bio-based product for Image Feature Extraction food, energy and Method to Analyze Soft- chemicals Mode Turbulence BIT's 3rd International Fluctuation in Nematic Biotechnology Congress- Liquid Crystal 41 2019 (IBC-2019) 2019 9th International Conference on Applied Penyelenggara 43 Physics and Mathematics BIT Congress Inc. (ICAPM 2019) Singapore – Singapore, 25-27 Oktober 2019 Penyelenggara Chulalongkorn University, Nama Prof. Dr. Judy Retti Thailand Witono, Ir., M.App.Sc. Bangkok – Thailand, 21-23 Teknologi Industri / Teknik Kimia Januari 2019 Peran Invited Speaker Nama Risti Suryantari, S.Si., M.Sc. Teknologi Informasi dan Sains / Fisika Classification of Meningioma MRI Images Peran Pemakalah Using First-Order Statistical Feature and Markov Random Field Pricing employee stock Modeling options with a binomial method: case study in 42 Digital Image & Signal Indonesia Processing Vienna Congress on Penyelenggara 44 Mathematical Finance Corgascience Company Penyelenggara Limited Wien University United Kingdom - United Kingdom, 29-30 April 2019 Vienna – Austria, 9-13 September 2019 Nama Flaviana, S.Si., M.T. Dr. Erwinna Chendra, Teknologi Informasi dan Sains / Fisika Nama S.Si., M.Si. Peran Pemakalah Teknologi Informasi dan Sains / Matematika Peran Pemakalah

130

Joint replenishment Development of policy for multi-item Flowshop Scheduling perishable inventory Simulator model with deterministic demands, return and all- International units discount Conference on Mathematical, International Congress 47 ComputationalSciences, on Industrial and Applied 45 and Management Mathematics (ICIAM) Penyelenggara Penyelenggara Association For Scientific And The International Council for Academic Research(ASAR) Industrial and Applied Mathematics Roma – Italy, 12 Oktober 2019 Valencia – Spain, 15-19 Juli 2019 Nama Luciana Abednego, Nama Dr. J. Dharma Lesmono S.Kom., M.T. Teknologi Informasi dan Sains / Teknologi Informasi dan Sains / Teknik Matematika Informatika Peran Pemakalah Peran Pemakalah

A Tabu Search Based Visualization of Hyper-heuristic for Entrepreneurial Cellular Flexible Flowshop Automata Scheduling Problems International International Conference on Conference on Mathematical ,Computational Sciences 46 “Interdisciplinary 48 Academic Research and and Management Innovation” (LARI-19) (ICMACOSCMA-19)

Penyelenggara Penyelenggara WRF (World Research Forum) Association For Scientific And Academic Research(ASAR) Roma – Italy. 10-11 Oktober 2019 Roma – Italy, 12 Oktober 2019 Dr. rer. nat Cecilia Esti Nama Vania Natali, S.Kom., Nugraheni, S.T., M.T. Nama M.T. Teknologi Informasi dan Sains / Teknik Informatika Teknologi Informasi dan Sains / Teknik Informatika Peran Pemakalah Peran Pemakalah

131

BAB 5: KEKAYAAN INTELEKTUAL PATEN

Alat Pendeteksi Kesalahan Otomatis untuk Pemasangan Sekrup

1 No. Permohonan Tanggal Permohonan Jenis Paten P00201909453 22 October 2019 Biasa Nama Inventor Pemegang Paten Dr. Ir. Paulus Sukapto, MBA UNPAR

Abstrak Invensi ini berhubungan dengan suatu alat pemilah spare-part yang sudah sempurna dan reject spare-part. Untuk mengurangi kemungkinan akan terjadinya human error, alat tersebut dilengkapi dengan teknologi sensor untuk mendeteksi nat yang tidak terpasang secara semestinya. Alat pemilah ini secara keseluruhan meliputi: 3 buah Proximity Sensor, batang logam sebagai jalur putar objek yang di sortir, sepasang bak pengumpul barang (reject dan non reject), sepasang batang besi penahan, dan 4 buah roda frame pada bagian bawah depan dan belakang mesin.

Alat Penutup Fleksibel untuk Percikan Las

2 No. Permohonan Tanggal Permohonan Jenis Paten P00201909452 22 October 2019 Biasa

Nama Inventor Pemegang Paten Dr. Ir. Paulus Sukapto, MBA UNPAR

Abstrak Invensi ini berhubungan dengan suatu alat las spare-part pada proses manufaktur industri. Timbulnya fenomena percikan bunga api dari alat las konvensional membuat kenyamanan pekerja terganggu. Oleh sebab itu, invensi ini dilengkapi dengan teknologi Nyllon Rubber Tube guna meredam adanya percikan bunga api dengan jangkauan diameter yang luas. Alat las ini meliputi: sepasang Nyllon Rubber Tube Hitam, pelat besi alumunium, dan sepasang per Misumi.

132 Alat Pengaman untuk Mesin Pounching

3 No. Permohonan Tanggal Permohonan Jenis Paten S00201909424 21 October 2019 Sederhana

Nama Inventor Pemegang Paten Dr. Ir. Paulus Sukapto, MBA UNPAR

Abstrak Invensi ini berkaitan dengan suatu alat pengaman untuk suatu mesin pounching upper sepatu, khususnya untuk menahan bagian upper. Alat pengaman untuk mesin pounching upper sepatu meliputi: lembaran bahan sejenis polietilen persegi panjang dan sambungan dari mesin ke lembaran alat penahan yang terbuat dari logam anti karat dan engsel jenis universal.

Sistem Informasi Pelaporan dan Pemantauan serta Pertukaran Informasi Hasil Pemanfaatan Dana Desa 4 No. Permohonan Tanggal Permohonan Jenis Paten S00201908773 04 October 2019 Sederhana

Nama Inventor Pemegang Paten Sandy; V. Gatut Harijoso; Triana Mugia Rahayu UNPAR

Abstrak Sebuah sistem informasi yang terdiri dari sub sistem yaitu Sub Sistem Informasi Pelaporan dan Pemantauan Pemanfaatan Dana Desa dan Sub Sistem Informasi Pertukaran Informasi Hasil Pemanfaatan Dana Desa dapat membantu menyelesaikan permasalahan yang terjadi seperti yang telah dijelaskan pada Latar Belakang Invensi. Sub Sistem Informasi Pelaporan dan Pemantauan Pemanfaatan Dana Desa bertujuan mempermudah Kemendes dalam menerima pelaporan pemanfaatan anggaran dari seluruh desa. Kemendes mempunyai kewajiban untuk memeriksa semua laporan harus memenuhi aturan yang berlaku, termasuk kemungkinan adanya penyelewengan pemanfaatan dana desa. Dengan adanya fasilitas pemantauan dari masyarakat luas akan membantu Kemendes mendeteksi kemungkinan oknum yang menyelewengkan dana desa. Masyarakat bisa melaporkan dugaan adanya penyelewengan, kemudian Kemendes bisa menelusuri bahkan bisa melaporkan kepada kepolisian atau kejaksaan. Dengan adanya pelaporan masyarakat akan membuat aparat desa tidak berani dalam menyelewengkan dana desa. Harapannya tujuan pemerintah menggulirkan program ini akan membuat masyarakat desa semakin lebih berdaya. Sub Sistem Informasi Pertukaran Informasi Hasil Pemanfaatan Dana Desa akan menerima rangkuman laporan pemanfaatan dana desa serta keberhasilan yang telah dicapai. Informasi ini dikumpulkan oleh sub system, sehingga desa lain yang memerlukan dapat mengakses tentang program pemanfaatan dana desa daridesa

133

lainnya. Jadi sub sistem ini dapat membantu dalam hal pertukaran informasi seperti ide dan pengetahuan dari desa lainnya yang telah berhasil memanfaatkan dana desa dengan baik.

Proses Pemurnian Garam Menggunakan Metode Hidroekstraksi Secara Batch 5 No. Permohonan Tanggal Permohonan Jenis Paten S00201910694 20 November 2019 Sederhana

Nama Inventor Pemegang Paten Prof. Dr. Judy Retti Witono, Ir., M.App.Sc; Herry Santoso, UNPAR S.T., M.T., Ph.D.; Angela Martina, S.T., M.T.

Abstrak Garam rakyat dapat dimurnikan dari pengotor-pengotornya, seperti Ca dan Mg dengan menggunakan metode hidroektraksi secara batch. Dalam metode ini, garam rakyat dikontakkan dengan larutan garam NaCl jenuh sehingga garam-garam lain yang menjadi pengotor di dalam kristal garam, seperti Ca dan Mg, akan ikut terlarut dalam larutan garam NaCl jenuh, sedangkan NaCl dalam kristal garam tidak akan ikut terlarut dalam larutan garam NaCl jenuh tersebut. Dengan demikian, kristal garam akan menjadi lebih murni dengan NaCl. Kristal garam yang telah dihidroekstraksi kemudian dipisahkan dari larutan pengekstraknya dengan penyaringan. Jika kristal garam yang dihasilkan belum mencapai tingkat kemurnian yang diinginkan, proses hidroekstraksi dapat diulang kembali disertai dengan pengecilan ukuran partikel garam menggunakan larutan garam NaCl jenuh segar. Jumlah pengulangan pada proses hidroekstrasi dapat disesuaikan dengan kebutuhan. Jika tingkat kemurnian garam NaCl yang dihasilkan telah tercapai, kristal garam selanjutnya dikeringkan. Metode hidroekstrasi hanya membutuhkan energi panas untuk pengeringan kristal garam saja sehingga lebih hemat energi dibandingkan dengan metode rekristalisasi.

Struktur Resiprokal 'Gridshell' Deployable

6 No. Permohonan Tanggal Permohonan Jenis Paten S00201908105 16 September 2019 Sederhana

Nama Inventor Pemegang Paten Charnele, Anastasia Maurina UNPAR

Abstrak Invensi ini berupa struktur resiprokal ‘gridshell’ deployabel sebagai struktur bidang atap lengkung pada bangunan permanen/sementara/ darurat yang dapat didirikan dengan relatif cepat karena struktur ini dapat dibuka menjadi bentuk yang besar dan ditutup menjadi bentuk yang lebih kecil dilengkapi dengan sistem penguncian mandiri pada konstruksi.

134 Struktur ini terdiri dari modul elemen ‘scissor-like’ yang disusun menjadi modul resiprokal ganda yang kemudian dapat diduplikasi ke tiga arah membentuk sebuah struktur bidang. Ukuran modul dapat disesuaikan dengan hasil pelengkungan bidang sesuai dengan kebutuhan perancangan bangunan. Struktur resiprokal ‘gridshell’ deployabel ini memiliki kemampuan dibuka dan ditutup membuat struktur ini dapat ditransportasi dengan mudah relatif mudah, sehingga dapat dibuat dahulu ditempat lain (prefabrikasi) dan dipindahkan pada lokasi pembangunan, termasuk pada kondisi lahan yang cukup sulit dijangkau namun memiliki kebutuhan bangunan bentang lebar dalam waktu singkat, seperti pada kondisi paskabencana.

Bata Interlocking untuk Taman Vertikal

7 No. Permohonan Tanggal Permohonan Jenis Paten S00201908104 16 September 2019 Sederhana

Nama Inventor Pemegang Paten Samuel Andrean Philipus; Mia Wimala; Budianastas UNPAR Prastyatama

Abstrak Suatu bata interlocking yang merupakan sebuah modul dinding yang sekaligus berfungsi sebagai wadah media tanam yang dilengkapi dengan fitur sistem drainase melalui lubang-lubang pada alas wadah tanaman, dan ruang untuk sistem irigasi berupa coakan tempat meletakan pipa irigasi. Modul ini juga dilengkapi dengan sistem konstruksi saling kunci (interlocking) sehingga memudahkan proses pemasangan. Melalui rancangan invensi ini dapat diperoleh sebuah taman vertikal yang dilengkapi dengan fitur untuk menunjang kebutuhan tanaman dan terintegrasi dengan sistem konstruksi dinding pengisi pada bangunan.

135

HAK CIPTA

Efektivitas Program Score Unpar dalam Revitalisasi Bisnis UKM

1 No. Pencatatan Tanggal Permohonan Jenis Ciptaan 000133043 28 January 2019 Buku

Nama Pencipta dan Nama Pemegang Hak Cipta Dr. Judith Felicia Pattiwael Irawan, Dra., MT.; Triyana Iskandarsyah, Dra., M.Si.; Ani Sugiharti; L. Retno Adiani, Dra., M.Si.; Nina Septina, SP., MM.; Rizka Nugraha Pratikna, SE., MM.; Dr. Sylvia Fettry EM., SE., SH., M.Si.Ak.; Fernando Mulia, SE., M.Kom.; Katlea Fitriani, ST., MSM.; Ria Satyarini, SE., M.Si.; Lilian Danil, SE., MM.; Atty Yuniawati, SE., MBA., CMA.

Analisis Laporan Keuangan

2 No. Pencatatan Tanggal Permohonan Jenis Ciptaan 000137598 15 March 2019 Buku

Nama Pencipta dan Nama Pemegang Hak Cipta Elvy Maria Manurung, S.E., Ak., M.T.

Agama dan Kesadaran Kontemporer

3 No. Pencatatan Tanggal Permohonan Jenis Ciptaan 000153937 12 September 2019 Buku

Nama Pencipta dan Nama Pemegang Hak Cipta Bartolomeus Samho, S.S., M.Pd.; Prof. Dr. Ignatius Bambang Sugiharto; Sylvester Kanisius Laku, S.S., M.Pd.; Andreas Doweng Bolo, S.S., M.Hum.; Samson Ganda J. Silitonga, S.Si., M.Si.; Mardohar Batu Bornok Simanjuntak, S.S., M.Si.; Nuraeni; Ani Kurniasih

Malaikat Kecilku, Refleksi Teologis Pengalaman Penderitaan Anak Manusia 4 No. Pencatatan Tanggal Permohonan Jenis Ciptaan 000147777 25 July 2019 Buku

Nama Pencipta dan Nama Pemegang Hak Cipta Bernardus Ario Tejo Sugiarto, S.S., M.Hum.

136 Hukum Perusahaan dalam Peraturan Perundang-undangan

5 No. Pencatatan Tanggal Permohonan Jenis Ciptaan 000139612 08 April 2019 Buku