ISO Update Supplement to ISOfocus

July 2018

International Standards in process

ISO/CD 6521-3 Lubricants, industrial oils and related products (Class L) — Family D (Compressors) — Part 3: Specifications of categories DRA, DRB, DRC, An International Standard is the result of an agreement between DRD, DRE, DRF and DRG (Lubricants for refrig- the member bodies of ISO. A first important step towards an Interna- erating compressors) tional Standard takes the form of a committee draft (CD) - this is cir- culated for study within an ISO technical committee. When consensus TC 31 Tyres, rims and valves has been reached within the technical committee, the document is ISO/CD 23671 Passenger car tyres — Method for measuring sent to the Central Secretariat for processing as a draft International relative wet grip performance — Loaded new Standard (DIS). The DIS requires approval by at least 75 % of the tyres member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval TC 35 Paints and varnishes criteria remaining the same. ISO/DTR Preparation of steel substrates before applica-

22770 tion of paints and related products — Analytical

colorimetry method to support visual assess- ment of surface preparation grades TC 38 Textiles ISO/CD Textiles — Determination of fabric propensity 12945-1 to surface pilling, fuzzing or matting — Part 1: Pilling box method CD registered ISO/CD Textiles — Determination of fabric propensity 12945-2 to surface pilling, fuzzing or matting — Part 2: Modified Martindale method Period from 01 June to 30 June 2018 ISO/CD Textiles- Determination of the fabric propensity 12945-3 to surface pilling, fuzzing or matting — Part 3: These documents are currently under consideration in the technical Random tumble pilling method committee. ISO/CD Textiles — Determination of fabric propensity They have been registred at the Central Secretariat. 12945-4 to surface pilling, fuzzing or matting — Part 4: Assessment of pilling, fuzzing or matting by TC 17 Steel visual analysis ISO/CD 4948 Classification of steels based on chemical TC 44 Welding and allied processes composition ISO/CD Welding — Micro joining of 2nd generation high TC 21 Equipment for fire protection and fire 17279-3 temperature superconductors — Part 3: Test methods for joint fighting TC 45 Rubber and rubber products ISO/PRF TS Guidance on design, selection and installation 21805 of vents to safeguard the structural integrity ISO/CD 1382 Rubber — Vocabulary of enclosures protected by fixed gaseous fire ISO/CD 11759 Rubber hoses and hose assemblies for fighting systems dispensing liquefied petroleum gases (LPGs) TC 22 Road vehicles — Specification ISO/CD Road Vehicles — Glow-plugs with conical ISO/CD 7725 Rubber and rubber products — Determination 17447-1 seating and their cylinder head housing — Part of bromine and chlorine content 1: Basic characteristics and dimensions for ISO/CD 21490 Rubber and rubber products — Determination metal-sheath-type glow-plugs of 2-Mercaptobenzothiazole content by high ISO/CD 15007 Road vehicles — Measurement and analysis of performance liquid chromatography (HPLC) driver visual behaviour with respect to trans- ISO/DTS Elastomeric seismic-protection isolators — port information and control systems 22762-4 Part 4: Guidance on the application of ISO TC 23 Tractors and machinery for agriculture 22762-3 and forestry TC 59 Buildings and civil engineering works ISO/CD 23130 Milking and cooling machine installa- ISO/CD Buildings and civil engineering works — Deter- tions — Monitoring device for cooling tanks 16938-1 mination of the staining of porous substrates — Requirements by sealants used in joints — Part 1: Test with TC 24 Particle characterization including compression sieving ISO/CD Buildings and civil engineering works — Deter- 16938-2 mination of the staining of porous substrates ISO/CD 14488 Particulate materials — Sampling and sample by sealants used in joints — Part 2: Test with- splitting for the determination of particulate out compression properties ISO/CD 21678 Sustainability in buildings and civil engineer- TC 28 Petroleum and related products, fuels ing works — Methodological principles for the and lubricants from natural or synthetic development of benchmarks for sustainable sources buildings ISO/CD 6521-1 Lubricants, industrial oils and related products TC 61 Plastics (Class L) — Family D (Compressors) — Part 1 — Part 1: Specifications of categories DAA and ISO/DTR Guidance on fire characteristics and fire DAB (Lubricants for reciprocating and drip feed 20118 performance of PVC materials used in building rotary air compressors) applications

ISO Update, Supplement to ISO Focus -- July 2018 1 ISO/CD Plastics — Polyetheretherketone (PEEK) TC 106 Dentistry 23153-1 moulding and extrusion materials — Part ISO/CD 10271 Dentistry — Corrosion test methods for metal- 1: Designation system and basis for lic materials specifications ISO/CD Plastics — Polyetheretherketone (PEEK) TC 107 Metallic and other inorganic coatings 23153-2 moulding and extrusion materials — Part 2: ISO/CD 22680 Metallic and other inorganic coatings- Meas- Preparation of test specimens and determina- urement of linear thermal expansion coefficient tion of properties of thermal barrier coatings TC 79 Light metals and their alloys TC 108 Mechanical vibration, shock and condi- ISO/CD 23052 Anodizing of aluminium and its alloy — Test tion monitoring methods of chemical resistance of anodic ISO/CD Condition monitoring and diagnostics of wind oxidation coatings on aluminium and its alloys 16079-2 turbines — Part 2: Detection of mechanical using electromotive force apparatus faults of the drive train TC 82 Mining TC 117 Fans ISO Underground mining machines — Mobile ex- ISO/CD Fans — Efficiency classification for fans — Part 19225:2017/ tracting machines at the face — Safety require- 12759-5 5: Jet fans CD Amd 1 ments for shearer loaders and plough systems — Amendment 1 TC 123 Plain bearings TC 85 Nuclear energy, nuclear technologies, ISO/CD 6281 Plain bearings — Testing under conditions of hydrodynamic and mixed lubrication in test rigs and radiological protection ISO/CD 3547-5 Plain bearings — Wrapped bushes — Part 5: ISO/CD 10276 Nuclear energy — Fuel technology — Trun- Checking the outside diameter nions for packages used to transport radioac- tive material ISO/CD 3547-6 Plain bearings — Wrapped bushes — Part 6: Checking the inside diameter TC 86 Refrigeration and air-conditioning ISO/CD 3547-7 Plain bearings — Wrapped bushes — Part 7: ISO/CD 916 Testing of refrigerating systems Measurement of wall thickness of thin-walled TC 92 Fire safety bushes ISO/CD 834-2 Fire-resistance tests — Elements of building TC 126 Tobacco and tobacco products construction — Part 2: Uniformity measure- ISO/CD TS Water pipe tobacco — Determination of total ment of furnace exposure on test samples 22487 collected matter and nicotine using a water ISO/CD Life-threatening components of fire — Part 1: pipe tobacco smoking machine 13571-1 Guidelines for the estimation of time to com- TC 127 Earth-moving machinery promised tenability in fires ISO/CD Earth-moving machinery — Hydraulic Break- TC 94 Personal safety -- Personal protective 16417-1 ers — Part 1: Terminology and commercial equipment specifications ISO/CD Eyewear for protection against intense light TC 130 Graphic technology 12609-1 sources used on humans and animals for cosmetic and medical applications — Part 1: ISO/CD Graphic technology — File format for quality Specification for products 20616-2 control and metadata — Part 2: Print quality exchange (PQX) ISO/DTR Patient and client eye protectors for use during 22463 laser or intense light source (ILS) procedures ISO/CD TR Graphic technology — Assessment and valida- — Guidance 23031 tion of the performance of spectrocolorimeters and spectrodensitometers ISO/CD Wildland firefighting personal protective equip- 16073-1 ment — Requirements and test methods — TC 131 Fluid power systems Part 1: General ISO/CD 11171 Hydraulic fluid power — Calibration of auto- ISO/CD Wildland firefighting personal protective equip- matic particle counters for liquids 16073-2 ment — Requirements and test methods — TC 156 Corrosion of metals and alloys Part 2: Compatibility ISO/CD 8407 Corrosion of metals and alloys — Removal ISO/CD Wildland firefighting personal protective equip- of corrosion products from corrosion test 16073-3 ment — Requirements and test methods — specimens Part 3: Clothing TC 163 Thermal performance and energy use ISO/CD Wildland firefighting personal protective equip- in the built environment 16073-4 ment — Requirements and test methods — Part 4: Gloves ISO/CD 21239 Thermal insulation products for building - Re- flective insulating products - Specification and ISO/CD Wildland firefighting personal protective equip- testing 16073-5 ment — Requirements and test methods — Part 5: Helmets ISO/CD 22482 Thermal insulation products — Aerogel blanket for buildings — Determination of physical ISO/CD Wildland firefighting personal protective equip- properties 16073-6 ment — Requirements and test methods — Part 6: Footwear TC 178 Lifts, escalators and moving walks ISO/CD Wildland firefighting personal protective equip- ISO/CD Lifts for the transportation of persons and 16073-7 ment — Requirements and test methods — 8100-32 goods — Part 32: Planning and selection of Part 7: Face and eye protection passenger lifts to be installed in office, hotel ISO/CD Wildland firefighting personal protective equip- and residential buildings 16073-8 ment — Requirements and test methods — TC 182 Geotechnics Part 8: Hearing ISO/CD Ground investigation and testing — Field test- ISO/CD Wildland firefighting personal protective equip- 22476-14 ing — Part 14: Borehole dynamic probing 16073-9 ment — Requirements and test methods — Part 9: Firehoods TC 189 Ceramic tile

2 ISO Update, Supplement to ISO Focus -- July 2018 ISO/CD Ceramic tiles — Grouts and adhesives — Part ISO/CD Solid biofuels — Determination of fines content 13007-6 6: Requirements, test methods, evaluation of 18846-2 in quantities of pellets — Part 2: Simplified conformity, classification and designation for method waterproof membranes used with the installa- TC 249 Traditional chinese medicine tion of ceramic tiles ISO/CD 22217 Traditional Chinese medicine --Storage require- TC 190 Soil quality ments for raw materials and decoction pieces ISO/CD 23265 Soil quality — Test for measuring organic mat- ISO/CD 22467 Traditional Chinese Medicine- Determination of ter decomposition in contaminated soil microorganism in natural products TC 194 Biological and clinical evaluation of TC 258 Project, programme and portfolio medical devices management ISO/CD Biological evaluation of medical devices — Part ISO/DTR Vocabulary for Project, Programme and Portfo- 10993-23 23: Determination of skin irritation of medical 21506 lio Management device extracts using Reconstructed human Epidermis (RhE) TC 261 Additive manufacturing ISO/CD Medical devices utilizing animal tissues and ISO/ASTM CD Additive manufacturing - Design - Functionally 22442-2 their derivatives — Part 2: Controls on sourc- TR 52912 graded additive manufacturing ing, collection and handling TC 268 Sustainable cities and communities TC 198 Sterilization of health care products ISO/CD 37156 Smart community infrastructures — Guidelines ISO/CD 17665 Sterilization of health care products — Moist on Data Exchange and Sharing for Smart Com- heat — Requirements for the development, munity Infrastructures validation and routine control of a sterilization ISO/CD 37161 Smart community infrastructures ― Guidance process for medical devices on smart transportation to save energy con- TC 199 Safety of machinery sumption in transportation services in cities ISO/CD Safety of machinery — Safety-related parts of ISO/CD 37162 Smart community infrastructures — Smart 13849-1 control systems — Part 1: General principles transportation for new towns for design TC 269 Railway applications TC 204 Intelligent transport systems ISO/CD 22163 Railway applications — Quality management ISO/CD 22078 Intelligent transport systems — Bicyclist system — Business management system detection and collision mitigation systems requirements for rail organizations: ISO (BDCMS) — Performance requirements and 9001:2015 and particular requirements for ap- test procedures plication in the rail sector TC 206 Fine ceramics ISO/CD 22888 Railway applications — Guidelines for planning of operational concepts for earthquake events ISO/CD 22278 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for crystal- TC 274 Light and lighting line quality of silicon carbide (SiC) single crystal ISO/CIE CD TS Light and lighting — Maintenance factor deter- using high resolution XRD 22012 mination — Way of working ISO/CD 27447 Fine ceramics (advanced ceramics, advanced TC 276 Biotechnology technical ceramics) — Test method for antibac- terial activity of semiconducting photocatalytic ISO/CD 21899 Biotechnology — Biobanking — General re- materials quirements for the validation and verification of processing methods in biobanks TC 207 Environmental management ISO/CD 23033 Biotechnology — Cell Characterization — Gen- ISO/CD Green bonds — Environmental performance eral guide for characterization of human cells 14030-2 of nominated projects and assets — Part 2: for therapeutic applications Taxonomy of eligible investment categories TC 279 Innovation management ISO/CD Green bonds — Environmental performance 14030-3 of nominated projects and assets — Part 3: ISO/CD 50500 Innovation management — Fundamentals and Verification requirements vocabulary TC 210 Quality management and correspond- TC 286 Collaborative business relationship ing general aspects for medical management devices ISO/CD 44002 Collaborative business relationship manage- ISO/CD 20417 Medical Devices — Requirements for general ment — Guidelines on the implementation of information to be provided by the manufacturer ISO 44001 TC 212 Clinical laboratory testing and in vitro JTC 1 Information technology diagnostic test systems ISO/IEC PDTR Information technology — Process assessment 33017 — Guidance for assessor training ISO/DTS Guidance for supervisors and operators of 22583 point-of-care testing (POCT) devices ISO/IEC PDTR Information technology — Process assessment 33018 — Guidance for assessor competency TC 215 Health informatics ISO/IEC CD Information technology — Security techniques ISO/DTS Health Informatics — Categorial structures for 15408-1 — Evaluation criteria for IT security — Part 1: 22773 representation of decocting process in tradi- Introduction and general model tional Chinese medicine ISO/IEC CD Information technology — Security techniques TC 227 Springs 15408-2 — Evaluation criteria for IT security — Part 2: ISO/CD Springs — Measurement and test param- Security functional components 22705-1 eters — Part 1: Cold formed cylindrical helical ISO/IEC CD Information technology — Security techniques compression springs 15408-3 — Evaluation criteria for IT security — Part 3: TC 238 Solid biofuels Security assurance components

ISO Update, Supplement to ISO Focus -- July 2018 3 ISO/IEC CD Information technology — Security techniques TC 21 Equipment for fire protec- 15408-4 — Evaluation criteria for IT security — Part 4: tion and fire fighting Framework for the specification of evaluation methods and activities ISO/DIS * Fire extinguishing media — 7203-1 Foam concentrates — Part 1: ISO/IEC CD Information technology — Security techniques Specification for low-expansion 2018-09-15 15408-5 — Evaluation criteria for IT security — Part 5: foam concentrates for top ap- Pre-defined packages of security requirements plication to water-immiscible ISO/IEC CD Information technology — Security techniques liquids 27009 — Sector-specific application of ISO/IEC (Revision of ISO 7203-1:2011) 27001 — Requirements ISO/DIS * Fire extinguishing media — ISO/IEC CD Information technology — Security techniques 7203-2 Foam concentrates — Part 2: 27034-4 — Application security — Part 4: Validation and Specification for medium- and 2018-09-15 verification high-expansion foam concen- trates for top application to ISO/IEC CD Information technology — Security techniques water-immiscible liquids 27102 — Information security management guidelines (Revision of ISO 7203-2:2011) for cyber insurance ISO/DIS * Fire extinguishing media — ISO/IEC CD Information technology — Conformance test 7203-3 Foam concentrates — Part 3: 19823-10 methods for security service crypto suites — Specification for low-expansion 2018-09-15 Part 10: Crypto suite AES-128 foam concentrates for top appli- ISO/IEC CD Information technology — Automatic identi- cation to water-miscible liquids 21471 fication and data capture techniques — Bar (Revision of ISO 7203-3:2011) code symbology specifications — Extended TC 22 Road vehicles Rectangular Data Matrix (DMRE) ISO/DIS * Road vehicles — Unified diag- 14229-1 nostic services (UDS) — Part 1: Application layer 2018-09-14

(Revision of ISO 14229-1:2013) TC 23 Tractors and machinery for agriculture and forestry DIS circulated ISO/DIS 22868 * Forestry and gardening ma- chinery — Noise test code for portable hand-held machines 2018-08-31 Period from 01 June to 30 June 2018 with internal combustion engine — Engineering method (Grade 2 These documents have obtained substantial support within the ap- accuracy) propriate ISO technical committee. (Revision of ISO 22868:2011) They have been submitted to the ISO member bodies for voting by TC 28 Petroleum and related the date shown. products, fuels and lu- * Available in English only bricants from natural or synthetic sources ISO * Lubricants, industrial oils and re- Vote 8068:2006/ lated products (class L) — Family terminates DAmd 1 T (Turbines) — Specification for 2018-08-31 lubricating oils for turbines — Amendment 1: Filterability tests TC 8 Ships and marine according to ISO 13357-1 and technology ISO 13357-2 — Requirement ISO/DIS 29400 * Ships and marine technology related to the stage of the test — Offshore wind energy — Port method and marine operations 2018-09-20 TC 30 Measurement of fluid flow in closed conduits (Revision of ISO 29400:2015) ISO/DIS * Measurement of fluid flow in ISO/DIS 6218 * Inland navigation vessels — 17089-1 closed conduits - Ultrasonic me- Manually- and power-operated ters for gas — Part 1: Meters for 2018-09-04 coupling devices for rope con- 2018-09-22 custody transfer and allocation nections of pushing units and measurement coupled vessels — Safety re- (Revision of ISO 17089-1:2010) quirements and main dimensions (Revision of ISO 6218:2015) TC 34 Food products TC 17 Steel ISO/DIS 11056 * Sensory analysis — Methodol- ogy — Magnitude estimation ISO/DIS 11484 * Steel products — Employer's method 2018-09-06 qualification system for non-de- structive testing (NDT) personnel 2018-09-18 (Revision of ISO 11056:1999,

ISO 11056:1999/Amd 1:2013, (Revision of ISO 11484:2009) ISO 11056:1999/Amd 2:2015) TC 20 Aircraft and space vehicles TC 37 Language and terminology ISO/DIS 11231 * Space systems — Probabilistic ISO/DIS 12620 * Management of terminology risk assessment (PRA) resources — Data category 2018-08-29 specifications 2018-08-29

(Revision of ISO 11231:2010)

4 ISO Update, Supplement to ISO Focus -- July 2018 (Revision of ISO 12620:2009) TC 67 Materials, equipment and TC 38 Textiles offshore structures for pe- ISO/DIS * Textiles — Quantitative chemical troleum, petrochemical and 1833-3 analysis — Part 3: Mixtures of natural gas industries acetate with certain other fibres 2018-09-07 ISO/DIS 20074 * Petroleum and natural gas indus- (method using acetone) try — Pipeline transportation (Revision of ISO 1833-3:2006) systems — Geological hazards 2018-09-05 ISO/DIS * Textiles — Quantitative chemi- for onshore 1833-10 cal analysis — Part 10: Mixtures pipeline of triacetate or polylactide with 2018-09-19 ISO/DIS 35102 * Petroleum and natural gas certain other fibres (method us- industries — Arctic operations — ing dichloromethane) Escape, evacuation and rescue 2018-09-13 (Revision of ISO 1833-10:2006) from offshore installations ISO/DIS * Textiles — Quantitative chemical TC 70 Internal combustion 1833-16 analysis — Part 16: Mixtures of engines polypropylene fibres with certain 2018-09-13 other fibres (method using ISO/DIS * Reciprocating internal combus- xylene) 2710-2 tion engines — Vocabulary (Revision of ISO 1833-16:2006) — Part 2: Terms for engine 2018-08-31 maintenance ISO/DIS * Textiles — Quantitative chemical (Revision of ISO 2710-2:1999) 1833-21 analysis — Part 21: Mixtures of chlorofibres, certain modacrylics, 2018-09-20 ISO/DIS * Reciprocating internal combus- certain elastanes, acetates, tri- 8178-3 tion engines — Exhaust emission acetates with certain other fibres measurement — Part 3: Test 2018-09-13 (method using cyclohexanone) procedures for measurement (Revision of ISO 1833-21:2006) of exhaust gas smoke emis- sions from compression ignition ISO/DIS 2370 * Textiles — Determination of engines using a filter type smoke fineness of flax fibres — Permea- meter metric methods 2018-09-14 (Revision of ISO 8178-3:1994)

(Revision of ISO 2370:1980) ISO/DIS * Reciprocating internal combus- 8178-9 tion engines — Exhaust emission TC 44 Welding and allied measurement — Part 9: Test 2018-09-18 processes cycles and test procedures for ISO/DIS * Specification and qualification of measurement of exhaust gas 15609-1 welding procedures for metallic smoke emissions from compres- materials — Welding procedure 2018-09-11 sion ignition engines using an specification — Part 1: Arc Opacimeter welding (Revision of ISO 8178-10:2002, (Revision of ISO 15609-1:2004, ISO 8178-9:2012) ISO 15609-1:2004/Cor 1:2005) TC 84 Devices for administration TC 45 Rubber and rubber of medicinal products and products catheters ISO * Rubber and plastics hoses and ISO/DIS 20069 * Guidance for assessment and 19385:2017/ hose assemblies, wire- or textile- evaluation of changes to drug DAmd 1 reinforced, for water jetting or 2018-08-31 delivery systems 2018-09-20 water blasting applications — Specification — Amendment 1 TC 86 Refrigeration and ISO/DIS 2453 * Rubber, raw styrene-butadiene, air-conditioning emulsion-polymerized — Deter- mination of bound styrene con- 2018-09-07 ISO 16358- * Air-cooled air conditioners and tent — Refractive index method 1:2013/DAmd air-to-air heat pumps — Test- (Revision of ISO 2453:1991, ISO 1 ing and calculating methods for 2018-09-04 2453:1991/Cor 1:2003) seasonal performance factors — Part 1: Cooling seasonal perfor- TC 61 Plastics mance factor — Amendment 1 ISO/DIS * Plastics — Unplasticized TC 108 Mechanical vibration, 11833-1 poly(vinyl chloride) sheets — shock and condition Types, dimensions and char- 2018-08-29 monitoring acteristics — Part 1: Sheets of thickness not less than 1 mm ISO/DIS * Vibration and shock — Ex- (Revision of ISO 11833-1:2012) 7626-5 perimental determination of mechanical mobility — Part 5: 2018-09-08 ISO/DIS 11963 * Plastics — Polycarbonate Measurements using impact sheets — Types, dimensions and excitation with an exciter which characteristics 2018-08-29 is not attached to the structure

(Revision of ISO 7626-5:1994) (Revision of ISO 11963:2012) TC 119 Powder metallurgy ISO/DIS 20144 * Fibre-reinforced plastic com- posites — Standard qualification ISO/DIS * Hardmetals — Metallographic plan (SQP) for composite materi- 2018-09-05 4499-2 determination of microstructure als, including reduced (RQP) and — Part 2: Measurement of WC 2018-09-14 extended (EQP) schemes grain size (Revision of ISO 4499-2:2008) TC 123 Plain bearings

ISO Update, Supplement to ISO Focus -- July 2018 5 ISO/DIS * Plain bearings — Thin-walled (Revision of ISO 10110-12:2007, ISO 10110-12:2007/Amd 1:2013) 3548-2 half bearings with or without flange — Part 2: Measurement 2018-09-12 ISO/DIS * Microscopes — Definition and of wall thickness and flange 19056-2 measurement of illumination thickness properties — Part 2: Illumination 2018-09-21 (Revision of ISO 3548-2:2009) properties related to the colour in bright field microscopy TC 135 Non-destructive testing ISO/DIS 12718 * Non-destructive testing — Eddy TC 184 Automation systems and current testing — Vocabulary integration 2018-09-14 ISO/DIS * Industrial automation systems 10303-242 and integration — Product data (Revision of ISO 12718:2008) representation and exchange — 2018-09-05 TC 137 Footwear sizing designa- Part 242: Application protocol: Managed model-based 3D tions and marking systems engineering ISO/DIS 9407 * Footwear sizing — Mondopoint (Revision of ISO system of sizing and marking 10303-242:2014) 2018-08-30 TC 194 Biological and clinical eval- (Revision of ISO 9407:1991) uation of medical devices TC 145 Graphical symbols ISO/DIS 14155 * Clinical investigation of medical devices for human subjects — ISO * Graphical symbols — Public Good clinical practice 2018-09-12 7001:2007/ information symbols — Amend- DAmd 101 ment 101: PI CF 021: Dance hall 2018-09-05 (Revision of ISO 14155:2011, or ballroom ISO 14155:2011/Cor 1:2011) ISO * Graphical symbols — Public TC 197 Hydrogen technologies 7001:2007/ information symbols — Amend- DAmd 102 ment 102: PI PF 077 Drinking 2018-09-05 ISO/DIS 14687 * Hydrogen fuel quality — Product water fountain specification 2018-09-04 ISO * Graphical symbols — Public 7001:2007/ information symbols — Amend- (Revision of ISO 14687- DAmd 103 ment 103: PI PF 078 Elevator or 2018-09-05 1:1999, ISO 14687-3:2014, ISO lift for goods 14687-2:2012) ISO * Graphical symbols — Public TC 198 Sterilization of health care 7001:2007/ information symbols — Amend- products DAmd 104 ment 104: PI PF 079 Men's 2018-09-05 changing room ISO/DIS * Sterilization of medical devices 11737-2 — Microbiological meth- ISO * Graphical symbols — Public ods — Part 2: Tests of steril- 2018-08-30 7001:2007/ information symbols — Amend- ity performed in the definition, DAmd 105 ment 105: PI PF 080 Pedestrian 2018-09-05 validation and maintenance of a overpass or footbridge sterilization process ISO * Graphical symbols — Public (Revision of ISO 11737-2:2009) 7001:2007/ information symbols — Amend- DAmd 106 ment 106: PI PF 081 Women's 2018-09-05 TC 201 Surface chemical analysis changing room ISO/DIS 20903 * Surface chemical analysis — Auger electron spectros- ISO * Graphical symbols — Safety copy and X-ray photoelectron 2018-09-20 7010:2011/ colours and safety signs — spectroscopy — Methods used DAmd 243 Registered safety signs — 2018-09-15 to determine peak intensities Amendment 243: Safety sign and information required when E030: Emergency exit for people reporting results unable to walk or with walking (Revision of ISO 20903:2011) impairment (right) TC 156 Corrosion of metals and TC 207 Environmental alloys management ISO/DIS 14090 * Adaptation to climate change ISO/DIS 22479 * Corrosion of metals and alloys — Principles, requirements and — Sulfur dioxide test in a humid guidelines 2018-09-04 atmosphere (Fixed gas method) 2018-09-11

(Revision of ISO 3231:1993, ISO TC 211 Geographic information/ 6988:1985) Geomatics TC 171 Document management ISO 19150- * Geographic information — applications 2:2015/DAmd Ontology — Part 2: Rules for 1 developing ontologies in the 2018-09-21 ISO/DIS * Document management — XML Web Ontology Language (OWL) 19444-1 Forms Data Format — Part 1: — Amendment 1 Use of ISO 32000-2 (XFDF 3.0) 2018-09-05 TC 212 Clinical laboratory testing (Revision of ISO 19444-1:2016) and in vitro diagnostic test TC 172 Optics and photonics systems ISO/DIS * Optics and photonics — Prepa- 10110-12 ration of drawings for optical elements and systems — Part 2018-09-18 12: Aspheric surfaces

6 ISO Update, Supplement to ISO Focus -- July 2018 ISO/DIS * Susceptibility testing of infec- (Revision of ISO/IEC 15693- 20776-1 tious agents and evaluation of 3:2009, ISO/IEC 15693-3:2009/ performance of antimicrobial 2018-09-19 Amd 2:2015, ISO/IEC 15693- susceptibility test devices — 3:2009/Amd 3:2015, ISO/IEC Part 1: Broth micro-dilution 15693-3:2009/Amd 4:2017) reference method for testing the ISO/IEC DIS * Information technology — Radio in vitro activity of antimicrobial 22243 frequency identification for item agents against rapidly grow- management — Methods for 2018-08-29 ing aerobic bacteria involved in localization of RFID tags infectious diseases ISO/IEC DIS * Information technology — Big (Revision of ISO 20776-1:2006) 20547-3 data reference architecture — TC 213 Dimensional and geometri- Part 3: Reference architecture 2018-09-19 cal product specifications and verification ISO/DIS * Geometrical product specifica- 10360-5 tions (GPS) — Acceptance and reverification tests for coordi- 2018-09-21 nate measuring systems (CMS) — Part 5: CMMs using single and multiple stylus contacting probing systems using discrete FDIS circulated point and/or scanning measuring mode (Revision of ISO 10360-5:2010) Period from 01 June to 30 June 2018 TC 219 Floor coverings These Final draft International Standards have been submitted to the ISO/DIS 10361 * Textile floor coverings — Produc- ISO member bodies for formal approval by the date shown tion of changes in appearance * Available in English only by means of Vettermann drum 2018-09-06 and hexapod tumbler tester (Revision of ISO 10361:2015) ISO/DIS 13746 * Textile floor coverings — Guide- Vote lines for installation and use on terminates stairs 2018-08-29 TC 8 Ships and marine (Revision of ISO 13746:2000) technology TC 268 Sustainable cities and ISO/FDIS * Ships and marine technology communities 17325-3 — Marine environment protec- ISO/DIS 37122 * Sustainable development in tion — Oil booms — Part 3: End 2018-08-18 communities — Indicators for connectors Smart Cities 2018-08-30 TC 20 Aircraft and space vehicles

ISO/FDIS * Space systems — Human-life TC 285 Clean cookstoves and 17763 activity support systems and clean cooking solutions equipment integration in space 2018-08-07 ISO/DIS 19869 * Clean cookstoves and clean flight cooking solutions — Guidance TC 22 Road vehicles on field testing methods for 2018-09-06 cookstoves ISO/FDIS * Electrically propelled road vehi- 6469-3 cles — Safety specifications — IULTCS International Union of Part 3: Electrical safety 2018-08-18 Leather Technologists and Chemists Societies (Revision of ISO 6469-3:2011) ISO/DIS 23910 * Leather — Physical and me- TC 23 Tractors and machinery for chanical tests — Measurement agriculture and forestry of stitch tear resistance 2018-09-05 ISO/FDIS * Agricultural machinery and

18497.2 tractors — Safety of highly (Revision of ISO 23910:2017) automated agricultural machines 2018-08-03 JTC 1 Information technology — Principles for design ISO/IEC/IEEE * Information technology — Sys- TC 35 Paints and varnishes DIS 21839 tems and software engineering ISO/FDIS * Paints and varnishes — De- — System of Systems (SoS) 2018-08-31 4623-1 termination of resistance to considerations in life cycle filiform corrosion — Part 1: Steel 2018-08-12 stages of a system substrates ISO/IEC DIS * Identification cards — Test meth- (Revision of ISO 4623-1:2000) 10373-7 ods — Part 7: Vicinity cards ISO/FDIS * Paints and varnishes — Coating 2018-09-20 16053 materials and coating systems

for exterior wood — Natural 2018-08-11 (Revision of ISO/IEC weathering test 10373-7:2008) (Revision of ISO 16053:2010) ISO/IEC DIS * Cards and security devices for 15693-3 personal identification — Con- tactless vicinity objects — Part 2018-09-08 3: Anticollision and transmission protocol

ISO Update, Supplement to ISO Focus -- July 2018 7 ISO/FDIS * Preparation of steel substrates ISO/FDIS * Petroleum and natural gas 11125-1 before application of paints and 15590-1 industries — Induction bends, related products — Test meth- 2018-08-12 fittings and flanges for pipeline 2018-08-22 ods for metallic blast-cleaning transportation systems — Part 1: abrasives — Part 1: Sampling Induction bends (Revision of ISO 11125-1:1993) (Revision of ISO 15590-1:2009) TC 38 Textiles ISO/FDIS * Petroleum and natural gas indus- 21809-1 tries — External coatings for ISO/FDIS * Textiles — Determination of buried or submerged pipelines 2018-08-17 21232 moisturizing effect of textile used in pipeline transportation materials by measurement of 2018-08-03 systems — Part 1: Polyolefin microclimate between textiles coatings (3-layer PE and 3-layer and simulated human skin using PP) sweating guarded hotplate (Revision of ISO 21809-1:2011) ISO/FDIS * Textiles — Method for assess- 15487 ing appearance of apparel and TC 87 Cork other textile end products after 2018-08-15 ISO/FDIS 1997 * Granulated cork and cork pow- domestic washing and drying der — Classification, properties (Revision of ISO 15487:2009) and packing 2018-08-14

TC 44 Welding and allied (Revision of ISO 1997:1992) processes ISO/FDIS 2030 * Granulated cork — Size analysis ISO/FDIS * Non-destructive testing of by mechanical sieving 17640 welds — Ultrasonic testing — 2018-08-14 Techniques, testing levels, and 2018-09-11 assessment (Revision of ISO 2030:1990) (Revision of ISO 17640:2017) TC 89 Wood-based panels ISO/FDIS 2553 * Welding and allied processes — Symbolic representation on ISO/FDIS * Wood-based panels — Determi- drawings — Welded joints 2018-08-16 12460-2 nation of formaldehyde release — Part 2: Small-scale chamber 2018-08-01 (Revision of ISO 2553:2013) method TC 45 Rubber and rubber TC 94 Personal safety -- Personal products protective equipment ISO/FDIS * Rubber- or plastics-coated ISO/FDIS 4007 * Personal protective equip- 32100 fabrics — Physical and mechani- ment — Eye and face protection cal tests — Determination of 2018-08-11 — Vocabulary flex resistance by the flexometer (Revision of ISO 4007:2012) method TC 96 Cranes (Revision of ISO 32100:2010) ISO/FDIS * Cranes — Design principles for TC 58 Gas cylinders 8686-3 loads and load combinations — ISO/FDIS * Gas cylinders — Welded alumin- Part 3: Tower cranes 2018-08-22 10460 ium-alloy, carbon and stainless steel gas cylinders — Periodic 2018-08-08 (Revision of ISO 12485:1998, inspection and testing ISO 8686-3:1998) (Revision of ISO 10460:2005) TC 107 Metallic and other inorgan- TC 61 Plastics ic coatings ISO/FDIS * Plastics moulded parts — ISO/FDIS 4531 * Vitreous and porcelain enam- 20457 Tolerances and acceptance els — Release from enamelled conditions 2018-07-31 articles in contact with food — Methods of test and limits ISO/FDIS * Plastics — Temperature modu- (Revision of ISO 4531-1:1998, 19935-1 lated DSC — Part 1: General ISO 4531-2:1998) principles 2018-08-07 TC 110 Industrial trucks

ISO/FDIS * Industrial trucks — Verification ISO/FDIS 1922 * Rigid cellular plastics — Deter- 22915-2 of stability — Part 2: Counterbal- mination of shear properties anced trucks with mast 2018-08-15 2018-08-12 (Revision of ISO 22915-2:2008) (Revision of ISO 1922:2012) ISO/FDIS * Industrial trucks — Verification TC 67 Materials, equipment and 22915-8 of stability — Part 8: Additional offshore structures for pe- stability test for trucks operating 2018-08-15 troleum, petrochemical and in the special condition of stack- natural gas industries ing with mast tilted forward and load elevated ISO/FDIS * Petroleum, petrochemical and (Revision of ISO 22915-8:2008) 17782 natural gas industries — Scheme for conformity assessment 2018-08-25 TC 126 Tobacco and tobacco of manufacturers of special products materials ISO/FDIS * Cigarettes — Routine analytical 20778 cigarette smoking machine — Definitions and standard condi- tions with an intense smoking regime

8 ISO Update, Supplement to ISO Focus -- July 2018 ISO/FDIS * Cigarettes — Generation and ISO/FDIS * Corrosion of metal and alloys 20779 collection of total particulate 20728 — Determination of resistance matter using a routine analytical of magnesium alloys to stress 2018-08-05 smoking machine with an in- corrosion cracking tense smoking regime TC 172 Optics and photonics ISO/FDIS 7210 * Routine analytical cigarette- ISO/FDIS * Optics and photonics — Lasers smoking machine — Addi- 11145 and laser-related equipment — tional test methods for machine Vocabulary and symbols 2018-08-23 verification

(Revision of ISO 7210:2013) (Revision of ISO 11145:2016) TC 127 Earth-moving machinery ISO/FDIS * Optics and photonics — La- ISO/FDIS * Earth-moving machinery — 13694 sers and laser-related equip- 19014-3.2 Functional safety — Part 3: ment — Test methods for laser 2018-08-23 Environmental performance and 2018-08-08 beam power (energy) density test requirements of electronic distribution and electrical components used (Revision of ISO 13694:2015) in safety-related parts of the TC 190 Soil quality control system (Revision of ISO 15998:2008) ISO/FDIS * Soil quality — Determination 20295 of perchlorate in soil using ion TC 131 Fluid power systems chromatography 2018-08-09 ISO/FDIS 6099 * Fluid power systems and components — Cylinders — ISO/FDIS * Soil quality — Determination of Identification code for mounting 2018-08-16 23161 selected organotin compounds dimensions and mounting types — Gas-chromatographic method (Revision of ISO 6099:2009) (Revision of ISO 23161:2009) TC 138 Plastics pipes, fittings and ISO/FDIS * Soil quality — Determination of valves for the transport of 23470 effective cation exchange capac- fluids ity (CEC) and exchangeable cati- 2018-08-10 ISO/FDIS 7432 * Glass-reinforced thermosetting ons using a hexamminecobalt(III) plastics (GRP) pipes and fittings chloride solution — Test methods to prove the de- 2018-08-16 (Revision of ISO 23470:2007) sign of locked socket-and-spigot ISO/FDIS * Soil quality — Assessment of joints, including double-socket 17924 human exposure from ingestion joints, with elastomeric seals of soil and soil material — Pro- 2018-08-12 (Revision of ISO 7432:2002) cedure for the estimation of the TC 146 Air quality human bioaccessibility/bioavail- ability of metals in soil ISO/FDIS * Indoor air — Part 36: Standard (Revision of ISO/TS 17924:2007) 16000-36 method for assessing the reduc- tion rate of culturable airborne 2018-08-25 TC 195 Building construction ma- bacteria by air purifiers using a chinery and equipment test chamber ISO/FDIS * Road construction and mainte- TC 147 Water quality 15645 nance equipment — Road milling machinery — Terminology and 2018-08-12 ISO/FDIS Water quality — Determination commercial specifications 20236 of total organic carbon (TOC), (Revision of ISO 15645:2002, dissolved organic carbon (DOC) 2018-08-25 ISO 15645:2002/Amd 1:2013) total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) TC 197 Hydrogen technologies after high temperature catalytic ISO/FDIS * Gaseous hydrogen — Thermally oxidative combustion 19882 activated pressure relief devices ISO/FDIS * Water quality — Plutonium and for compressed hydrogen vehi- 2018-08-16 20899 neptunium — Test method using cle fuel containers ICP-MS 2018-08-07 TC 198 Sterilization of health care products ISO/FDIS 8199 * Water quality — General ISO * Sterilization of health-care prod- requirements and guidance for 11135:2014/ ucts — Ethylene oxide — Re- microbiological examinations by 2018-08-04 FDAmd 1 quirements for the development, 2018-08-18 culture validation and routine control (Revision of ISO 8199:2005) of a sterilization process for TC 150 Implants for surgery medical devices — Amendment 1: Revision of Annex E, Single ISO 14242- * Implants for surgery — Wear of batch release 3:2009/FDAmd total hip-joint prostheses — Part 1 3: Loading and displacement 2018-08-09 ISO/FDIS * Packaging for terminally steri- parameters for orbital bearing 11607-2 lized medical devices — Part 2: type wear testing machines and Validation requirements for 2018-08-11 corresponding environmental forming, sealing and assembly conditions for test — Amend- processes ment 1 (Revision of ISO 11607-2:2006, ISO 11607-2:2006/Amd 1:2014) TC 156 Corrosion of metals and alloys TC 201 Surface chemical analysis

ISO Update, Supplement to ISO Focus -- July 2018 9 ISO/FDIS * Surface chemical analysis — De- ISO/FDIS * Cleanrooms and associated con- 18516 termination of lateral resolution 14644-12 trolled environments — Part 12: and sharpness in beam based 2018-08-23 Specifications for monitoring air 2018-08-08 methods with a range from na- cleanliness by nanoscale particle nometers to micrometers concentration (Revision of ISO 18516:2006) JTC 1 Information technology TC 202 Microbeam analysis ISO/IEC/IEEE * Systems and software engineer- ISO/FDIS * Microbeam analysis — Methods FDIS 24748-2 ing — Life cycle management 20720 of specimen preparation for — Part 2: Guidelines to the ap- 2018-08-14 analysis of general powders us- 2018-08-02 plication of ISO/IEC/IEEE 15288 ing WDS and EDS (System life cycle processes) (Revision of ISO/IEC TR TC 204 Intelligent transport 24748-2:2011) systems ISO/IEC * Identification cards — Integrated ISO/FDIS * Electronic fee collection — 7816-4:2013/ circuit cards — Part 4: Organiza- 14906 Application interface defini- FDAmd 2 tion, security and commands for 2018-08-02 tion for dedicated short-range 2018-08-04 interchange — Amendment 2: communication Waiting time management (Revision of ISO 14906:2011, ISO 14906:2011/Cor 1:2013, ISO ISO/IEC FDIS * Information technology — Iden- 14906:2011/Amd 1:2015) 24787 tification cards — On-card biometric comparison 2018-08-14 TC 206 Fine ceramics ISO/FDIS * Fine ceramics (advanced (Revision of ISO/IEC 17168-1 ceramics, advanced technical 24787:2010, ISO/IEC ceramics) — Test method for 2018-08-03 24787:2010/Cor 1:2013) air-purification performance of ISO/IEC FDIS * Information technology — Cod- semiconducting photocatalytic 14496-30 ing of audio-visual objects materials under indoor lighting — Part 30: Timed text and 2018-08-25 environment — Part 1: Removal other visual overlays in ISO base of nitric oxide media file format ISO/FDIS * Fine ceramics (advanced (Revision of ISO/IEC 14496- 17168-2 ceramics, advanced technical 30:2014, ISO/IEC 14496- ceramics) — Test method for 2018-08-03 30:2014/Cor 1:2015, ISO/IEC air-purification performance of 14496-30:2014/DAmd 1) semiconducting photocatalytic ISO/IEC FDIS * Information technology — Media materials under indoor lighting 23005-2 context and control — Part 2: environment — Part 2: Removal Control information 2018-08-16 of acetaldehyde ISO/FDIS * Fine ceramics (advanced (Revision of ISO/IEC 17168-3 ceramics, advanced technical 23005-2:2016) ceramics) — Test method for 2018-08-03 ISO/IEC FDIS * Information technology — air-purification performance of 23005-4 Media context and control semiconducting photocatalytic — Part 4: Virtual world object 2018-08-16 materials under indoor lighting characteristics environment — Part 3: Removal (Revision of ISO/IEC of toluene 23005-4:2016) ISO/FDIS * Fine ceramics (advanced 17168-4 ceramics, advanced technical ceramics) — Test method for 2018-08-03 air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 4: Removal of formaldehyde ISO/FDIS * Fine ceramics (advanced 17168-5 ceramics, advanced technical Standards published ceramics) — Test method for 2018-08-03 air-purification performance of semiconducting photocatalytic New International Standards published between 01 June and 30 materials under indoor lighting June 2018 environment — Part 5: Removal of methyl mercaptan * Available in English only TC 207 Environmental ** French version of standard previously published in English only management ISO/FDIS * Greenhouse gases — Part 1: 14064-1 Specification with guidance at the organization level for 2018-08-08 Price quantification and reporting of group greenhouse gas emissions and removals TC 17 Steel (Revision of ISO 14064-1:2006) ISO 4957:2018 Tool steels TC 209 Cleanrooms and associat- ed controlled environments E

10 ISO Update, Supplement to ISO Focus -- July 2018 TC 20 Aircraft and space vehicles ISO * Paints and varnishes — Determination 20266:2018 of image clarity (degree of sharpness ISO * Space systems — Human-life activ- of reflected or transmitted image) B 16157:2018 ity support systems and equipment

integration in space flight — Techno- B medical requirements for space vehicle TC 39 Machine tools human habitation environments ISO Machine tools — Environmental ISO * Space systems — Fiber optic com- 14955-2:2018 evaluation of machine tools — Part 2: 20780:2018 ponents — Design and verification Methods for measuring energy sup- G requirements C plied to machine tools and machine tool components TC 22 Road vehicles TC 43 Acoustics ISO 6546:2018 Road vehicles — Collection of ac- ISO Acoustics — Noise emitted by machin- cident data for evaluation of occupant 11200:2014/ ery and equipment — Guidelines for restraint performance B Amd 1:2018 the use of basic standards for the de- XZ termination of emission sound pressure levels at a work station and at other TC 23 Tractors and machinery for agri- specified positions — Amendment 1 culture and forestry TC 44 Welding and allied processes ISO Tractors and machinery for agriculture 11783-6:2018 and forestry — Serial control and com- ISO Welding — Arc-welded joints in alu- munications data network — Part 6: H 10042:2018 minium and its alloys — Quality levels Virtual terminal for imperfections C

ISO 11783- * Tractors and machinery for agriculture 7:2015/Amd and forestry — Serial control and com- ISO Specification and qualification of weld- 1:2018 munications data network — Part 7: E 15612:2018 ing procedures for metallic materials — Implement messages application layer Qualification by adoption of a standard A — Amendment 1 welding procedure specification ISO * Tractors and machinery for agricul- TC 45 Rubber and rubber products 20112-1:2018 ture and forestry — Camera interface ISO 3949:2018 Plastics hoses and hose assemblies — between tractor and implement — Part B Textile-reinforced types for hydraulic 1: Analogue camera interface applications — Specification B TC 28 Petroleum and related products, fuels and lubricants from natural ISO 2781:2018 Rubber, vulcanized or thermoplastic — or synthetic sources Determination of density ISO 4264:2018 Petroleum products — Calculation of B cetane index of middle-distillate fuels by the four variable equation B ISO Rubber — Standard reference elas- 13226:2018 tomers (SREs) for characterizing the ISO/TR * Petroleum products — Equivalency effect of liquids on vulcanized rubbers F 19686-2:2018 of test method determining the same property — Part 2: Density of petro- C ISO 3858:2018 Rubber compounding ingredients — leum products Carbon black — Determination of light TC 29 Small tools transmittance of toluene extract B

ISO/TS 13399- Cutting tool data representation and ISO Rubber compounding ingredients — 401:2016 exchange — Part 401: Creation and 28641:2018 Organic chemicals — General test exchange of 3D models — Converting, E methods F extending and reducing adaptive items

ISO/TS 13399- Cutting tool data representation and ISO 1856:2018 Flexible cellular polymeric materials — 405:2016 exchange — Part 405: Creation and Determination of compression set exchange of 3D models — Collets E A

TC 31 Tyres, rims and valves TC 61 Plastics ISO Agricultural tractor drive wheel tyres ISO Plastics — Determination of the 11795:2018 — Explanation of rolling circumference 10927:2018 molecular mass and molecular mass index (RCI) and speed radius index A distribution of polymer species by C (SRI) and method of measuring tyre matrix-assisted laser desorption/ioni- rolling circumference zation time-of-flight mass spectrometry TC 34 Food products (MALDI-TOF-MS) ISO Microbiology of the food chain — Hori- ISO * Plastics — Determination of caprolac- 18593:2018 zontal methods for surface sampling 15033:2018 tam and its cyclic and linear oligomers B by HPLC C

ISO Food safety management systems — ISO * Plastics — Poly(phenylene ether) (PPE) 22000:2018 Requirements for any organization in 20557-1:2018 moulding and extrusion materials — the food chain F Part 1: Designation system and basis B for specifications TC 35 Paints and varnishes TC 67 Materials, equipment and off- shore structures for petroleum, petrochemical and natural gas industries

ISO Update, Supplement to ISO Focus -- July 2018 11 ISO * Petroleum and natural gas indus- TC 108 Mechanical vibration, shock and 15138:2018 tries — Offshore production instal- condition monitoring lations — Heating, ventilation and H air-conditioning ISO * Mechanical vibration — Measurement 20816-4:2018 and evaluation of machine vibration TC 70 Internal combustion engines — Part 4: Gas turbines in excess of 3 D ISO Reciprocating internal combustion MW, with fluid-film bearings 8528-2:2018 engine driven alternating current gen- TC 112 Vacuum technology erating sets — Part 2: Engines C ISO/TS * Vacuum technology — Vacuum gauges 20177:2018 — Procedures to measure and report ISO Reciprocating internal combustion outgassing rates F 8178-6:2018 engines — Exhaust emission measure- ment — Part 6: Report of measuring E results and test TC 123 Plain bearings TC 71 Concrete, reinforced concrete ISO 6280:2018 * Plain bearings — Requirements and and pre-stressed concrete guidance on backings for thick-walled multilayer bearings A ISO * Testing of concrete — Part 5: Density 1920-5:2018 and water penetration depth ISO 6282:2018 * Plain bearings — Metallic thin-walled C half bearings — Determination of the

sigma 0,01*-limit A ISO * Testing of concrete — Part 13: Proper- 1920-13:2018 ties of fresh self compacting concrete D TC 126 Tobacco and tobacco products ISO Tobacco — Determination of the TC 84 Devices for administration 15152:2003/ content of total alkaloids as nicotine Amd 2:2018 — Continuous-flow analysis method — XZ of medicinal products and Amendment 2 catheters TC 127 Earth-moving machinery ISO Sterile single-use intravascular 11070:2014/ introducers, dilators and guidewires — ISO Earth-moving machinery — Functional Amd 1:2018 Amendment 1 XZ 19014-1:2018 safety — Part 1: Methodology to deter- mine safety-related parts of the control D system and performance requirements ISO Sterile urethral catheters for single use 20696:2018 TC 138 Plastics pipes, fittings and E valves for the transport of fluids ISO 15874- Plastics piping systems for hot and ISO Sterile drainage catheters and acces- 2:2013/Amd cold water installations — Polypropyl- 20697:2018 sory devices for single use 1:2018 ene (PP) — Part 2: Pipes — Amend- XZ F ment 1 ISO 15874- Plastics piping systems for hot and TC 92 Fire safety 3:2013/Amd cold water installations — Polypropyl- 1:2018 ene (PP) — Part 3: Fittings — Amend- XZ ISO * Generation and analysis of toxic gases ment 1 19703:2018 in fire — Calculation of species yields, equivalence ratios and combustion E ISO 15874- Plastics piping systems for hot and efficiency in experimental fires 5:2013/Amd cold water installations — Polypropyl- 1:2018 ene (PP) — Part 5: Fitness for purpose XZ TC 94 Personal safety -- Personal pro- of the system — Amendment 1 tective equipment TC 147 Water quality ISO 374- * Protective gloves against dangerous 1:2016/Amd chemicals and micro-organisms — ISO * Water quality — Determination of 1:2018 Part 1: Terminology and performance XZ 20596-1:2018 cyclic volatile methylsiloxanes in water requirements for chemical risks — — Part 1: Method using purge and D Amendment 1 trap with gas chromatography-mass spectrometry (GC-MS) TC 96 Cranes TC 150 Implants for surgery ISO Cranes — Training of slingers and 23853:2018 signallers ISO * Tissue-engineered medical products D 13019:2018 — Quantification of sulfated glycosa- minoglycans (sGAG) for evaluation of C chondrogenesis ISO * Cranes — Design principles for loads 8686-2:2018 and load combinations — Part 2: TC 171 Document management Mobile cranes C applications ISO * Electronic document management — TC 106 Dentistry 14641:2018 Design and operation of an information system for the preservation of elec- F ISO Dentistry — Polymer-based crown and tronic documents — Specifications 10477:2018 veneering materials D TC 172 Optics and photonics ISO * Optics and photonics — Optical mate- ISO Dentistry — Stationary dental units and 21575:2018 rials and components — The powder 7494-1:2018 dental patient chairs — Part 1: General test method for the water resistance of A requirements C optical glass TC 173 Assistive products

12 ISO Update, Supplement to ISO Focus -- July 2018 ISO * Wheelchairs — Part 6: Determination ISO Greenhouse gas management and 7176-6:2018 of maximum speed of electrically pow- 14080:2018 related activities — Framework and ered wheelchairs A principles for methodologies on climate F actions TC 176 Quality management and quality TC 210 Quality management and cor- assurance responding general aspects for ISO Quality management — Guidelines for medical devices 10005:2018 quality plans ISO * Medical devices — Connectors for E 18250-3:2018 reservoir delivery systems for health- care applications — Part 3: Enteral F TC 181 Safety of toys applications ISO/TR * Safety of toys — Part 9: Safety aspects TC 216 Footwear 8124-9:2018 related to mechanical and physical ISO Footwear — Test methods for whole properties — Comparison of ISO 8124- H 17708:2018 shoe — Upper sole adhesion 1, EN 71-1, and ASTM F963 B TC 182 Geotechnics ISO * Geotechnical investigation and testing TC 249 Traditional chinese medicine 17892-12:2018 — Laboratory testing of soil — Part ISO * Traditional Chinese medicine — Cod- 12: Determination of liquid and plastic E 20334:2018 ing system of formulae limits H TC 183 Copper, lead, zinc and nickel ores and concentrates TC 260 Human resource management ISO * Copper, lead, zinc and nickel con- ISO/TS * Human resource management — Im- 12743:2018 centrates — Sampling procedures for 30410:2018 pact of hire metric determination of metal and moisture G B content TC 184 Automation systems and TC 282 Water reuse integration ISO Water reuse in urban areas — Guide- ISO * Industrial automation systems and 20761:2018 lines for water reuse safety evalua- 18828-4:2018 integration — Standardized procedures tion — Assessment parameters and D for production systems engineering F methods — Part 4: Key performance indica- TC 285 Clean cookstoves and clean tors (KPIs) in production planning cooking solutions processes ISO * Clean cookstoves and clean cooking TC 190 Soil quality 19867-1:2018 solutions — Harmonized laboratory ISO Soil quality — Screening method for test protocols — Part 1: Standard test H 20244:2018 water content — Determination by sequence for emissions and perfor- refractometry A mance, safety and durability

TC 290 Online reputation ISO Soil quality — Effects of pollutants on ISO Online consumer reviews — Principles 15952:2018 juvenile land snails (Helicidae) — De- 20488:2018 and requirements for their collection, termination of the effects on growth by E moderation and publication D soil contamination

TC 197 Hydrogen technologies IULTCS International Union of Leather ISO * Gaseous hydrogen — Fuelling stations Technologists and Chemists 19880-3:2018 — Part 3: Valves Societies E ISO 4048:2018 Leather — Chemical tests — Deter- mination of matter soluble in dichlo- TC 204 Intelligent transport systems romethane and free fatty acid content B ISO * Intelligent transport systems — 15638-21:2018 Framework for cooperative telematics ISO Leather — Chemical determination of applications for regulated commercial E 5398-1:2018 chromic oxide content — Part 1: Quan- freight vehicles (TARV) — Part 21: tification by titration A Monitoring of regulated vehicles using roadside sensors and data collected from the vehicle for enforcement and ISO Leather — Chemical determination other purposes 5398-3:2018 of chromic oxide content — Part 3: Quantification by atomic absorption A ISO * Intelligent transport systems — Co- spectrometry 17427-1:2018 operative ITS — Part 1: Roles and responsibilities in the context of co- F JTC 1 Information technology operative ITS architecture(s) ISO/IEC/IEEE * Systems and software engineering — ISO * Intelligent transport systems — Local- 26512:2018 Requirements for acquirers and suppli- 29281-1:2018 ized communications — Part 1: Fast ers of information for users F networking & transport layer protocol G (FNTP) ISO/IEC * Cards and security devices for per- TC 207 Environmental management 14443-3:2018 sonal identification — Contactless proximity objects — Part 3: Initializa- G tion and anticollision

ISO Update, Supplement to ISO Focus -- July 2018 13 ISO/IEC * Cards and security devices for per- ISO 11748-2:2001 (reconfirmed) 14443-4:2018 sonal identification — Contactless ISO 15170-1:2001 (reconfirmed) proximity objects — Part 4: Transmis- G sion protocol ISO 15170-2:2001 (reconfirmed) ISO/IEC * Identification cards — ICC-managed ISO 16750-3:2012 18328-4:2018 devices — Part 4: Test methods for ISO 16750-5:2010 logical characteristics E ISO 20860-1:2008 (reconfirmed) ISO/IEC * Information technology — Security ISO 20860-2:2009 (reconfirmed) 29100:2011/ techniques — Privacy framework — ISO/TS Amd 1:2018 Amendment 1: Clarifications XZ 21609:2014

ISO 7862:2004 (reconfirmed)

ISO/TS (reconfirmed) 15827:2007 ISO 15828:2004 (reconfirmed) ISO 1102:2001 (reconfirmed) ISO 1726-1:2000 (reconfirmed) Standards confirmed ISO 3853:1994 (reconfirmed) ISO 7237:1993 ISO 7641:2012 The following International Standards are confimred for a five year period: ISO 7642:1991 (reconfirmed) ISO 7643:1991 (reconfirmed) TC 2 Fasteners ISO 7653:1985 (reconfirmed) ISO 3508:1976 (reconfirmed) ISO 8716:2001 (reconfirmed) TC 5 Ferrous metal pipes and metallic ISO 8717:2000 (reconfirmed) fittings ISO 8718:2001 (reconfirmed) ISO 15465:2004 (reconfirmed) ISO 11555-1:2003 (reconfirmed) TC 8 Ships and marine technology ISO 18207:2006 (reconfirmed) ISO 6325:1987 (reconfirmed) TC 29 Small tools ISO 8314:1987 (reconfirmed) ISO 234-1:1983 (reconfirmed) TC 17 Steel ISO 1651:1974 (reconfirmed) ISO 14404-1:2013 ISO 1684:1975 (reconfirmed) ISO 14404-2:2013 ISO 2336-1:1996 (reconfirmed) ISO 14656:1999 (reconfirmed) ISO 2729:1995 (reconfirmed) ISO 15698-1:2012 ISO 2804:1996 (reconfirmed) ISO 15698-2:2012 ISO 603-18:2013 ISO 13270:2013 ISO 3855:1977 (reconfirmed) ISO 404:2013 ISO 5419:1982 (reconfirmed) ISO 10474:2013 ISO 5968:1981 (reconfirmed) TC 20 Aircraft and space vehicles ISO 7294:1983 (reconfirmed) ISO 16458:2004 (reconfirmed) ISO 10887:1999 (reconfirmed) TC 22 Road vehicles ISO 10888:1999 (reconfirmed) ISO 22628:2002 (reconfirmed) TC 33 Refractories ISO 14229-4:2012 ISO 2478:1987 (reconfirmed) ISO 14229-6:2013 ISO 3187:1989 (reconfirmed) ISO 17458-2:2013 ISO 5013:1985 (reconfirmed) ISO 17458-3:2013 ISO 5014:1997 (reconfirmed) ISO 17458-4:2013 ISO 5016:1997 (reconfirmed) ISO 17458-5:2013 ISO 5017:2013 ISO 18542-1:2012 ISO 8840:1987 (reconfirmed) ISO 22900-3:2012 ISO 8895:2004 (reconfirmed) ISO 4141-4:2009 (reconfirmed) ISO 10059-1:1992 (reconfirmed) ISO 4165:2001 (reconfirmed) ISO 13765-1:2004 (reconfirmed) ISO 8820-3:2015 ISO 13765-2:2004 (reconfirmed) ISO 8854:2012 ISO 13765-3:2004 (reconfirmed) ISO 11446-2:2012 ISO 13765-4:2004 (reconfirmed) ISO 11452-5:2002 (reconfirmed) ISO 13765-5:2004 (reconfirmed) ISO 11748-1:2001 (reconfirmed) ISO 13765-6:2004 (reconfirmed)

14 ISO Update, Supplement to ISO Focus -- July 2018 ISO 14720-1:2013 ISO 284:2012 ISO 14720-2:2013 ISO 340:2013 TC 34 Food products ISO 4195:2012 ISO 5526:2013 ISO 14890:2013 ISO 17715:2013 ISO 15147:2012 ISO 24333:2009 (reconfirmed) ISO 16851:2012 ISO 707:2008 (reconfirmed) ISO 18573:2012 ISO 1211:2010 ISO 21179:2013 ISO 1739:2006 (reconfirmed) ISO 21180:2013 ISO 2962:2010 ISO 21181:2013 ISO 3433:2008 (reconfirmed) ISO 21182:2013 ISO 3727-1:2001 (reconfirmed) TC 42 Photography ISO 3727-2:2001 (reconfirmed) ISO 6:1993 (reconfirmed) ISO 5536:2009 ISO 1008:1992 (reconfirmed) ISO 5544:2008 (reconfirmed) ISO 1203:1998 (reconfirmed) ISO 5546:2010 ISO 1755:1987 (reconfirmed) ISO 6091:2010 ISO 1948:1987 (reconfirmed) ISO 6731:2010 ISO 2721:2013 ISO 6732:2010 ISO 7766:2003 (reconfirmed) ISO 6734:2010 ISO 9378:1993 (reconfirmed) ISO 8070:2007 (reconfirmed) ISO 10348:1993 (reconfirmed) ISO 8196-1:2009 ISO 10349-2:1992 (reconfirmed) ISO 8196-2:2009 ISO 10349-3:1992 (reconfirmed) ISO 8870:2006 (reconfirmed) ISO 10349-4:1992 (reconfirmed) ISO 11815:2007 (reconfirmed) ISO 10349-5:1992 (reconfirmed) ISO 12081:2010 ISO 10349-6:1992 (reconfirmed) ISO 12779:2011 ISO 10349-7:1992 (reconfirmed) ISO 13082:2011 ISO 10349-9:1992 (reconfirmed) ISO 15163:2012 ISO (reconfirmed) 10349-10:1992 ISO 15174:2012 ISO (reconfirmed) ISO/TS (reconfirmed) 10349-11:1992 15495:2010 ISO (reconfirmed) ISO/TS 10349-12:1992 17758:2014 ISO 11106-1:1997 (reconfirmed) ISO 17792:2006 (reconfirmed) ISO 11315-1:1997 (reconfirmed) ISO 20128:2006 (reconfirmed) ISO 11315-2:1997 (reconfirmed) ISO 23058:2006 (reconfirmed) ISO 14548:1998 (reconfirmed) ISO 26462:2010 ISO 14808:1997 (reconfirmed) ISO/TS (reconfirmed) 26844:2006 ISO 15740:2013 ISO 27871:2011 ISO 18902:2013 TC 38 Textiles ISO 18907:2013 ISO 105-E01:2013 ISO 18914:2013 ISO 105-E02:2013 ISO 18922:2003 (reconfirmed) ISO 105-E04:2013 ISO 18924:2013 ISO 1130:1975 (reconfirmed) ISO 18925:2013 ISO 1139:1973 (reconfirmed) ISO 18927:2013 ISO 2947:1973 (reconfirmed) ISO 18928:2013 ISO 8159:1987 (reconfirmed) ISO 18939:2013 TC 39 Machine tools ISO 22028-2:2013 ISO 5169:1977 (reconfirmed) ISO/TS (reconfirmed) 22028-3:2012 ISO 5170:1977 (reconfirmed) ISO/TS (reconfirmed) ISO 13041-7:2004 (reconfirmed) 22028-4:2012 ISO 3442-2:2005 (reconfirmed) TC 44 Welding and allied processes TC 41 Pulleys and belts (including veebelts) ISO 15609-6:2013 ISO 251:2012 TC 45 Rubber and rubber products

ISO Update, Supplement to ISO Focus -- July 2018 15 ISO 18899:2013 ISO 10428:1993 (reconfirmed) ISO 126:2005 (reconfirmed) ISO 14310:2008 (reconfirmed) ISO 498:1992 (reconfirmed) ISO 14693:2003 (reconfirmed) ISO 506:1992 (reconfirmed) ISO/TS 16901:2015 ISO 706:2004 (reconfirmed) ISO 976:2013 TC 69 Applications of statistical methods ISO 1124:1988 (reconfirmed) ISO 11648-2:2001 (reconfirmed) ISO 1435:1996 (reconfirmed) TC 72 Textile machinery and accessories ISO 3899:2005 (reconfirmed) ISO 98:2001 (reconfirmed) ISO 4658:1999 (reconfirmed) ISO 8114:1990 (reconfirmed) ISO 12243:2003 (reconfirmed) ISO 8489-1:1995 (reconfirmed) ISO 12492:2012 ISO 8489-2:1995 (reconfirmed) ISO 13773:1997 (reconfirmed) ISO 8489-3:1995 (reconfirmed) ISO 16565:2013 ISO 8489-4:1995 (reconfirmed) ISO 17278:2013 ISO 8489-5:1995 (reconfirmed) ISO 21870:2005 (reconfirmed) ISO 28239:2008 (reconfirmed) ISO 5473:1997 (reconfirmed) ISO 363-1:2006 (reconfirmed) ISO 5999:2013 ISO 363-2:2006 (reconfirmed) ISO 10066:1991 (reconfirmed) ISO 366-4:2005 (reconfirmed) TC 46 Information and documentation ISO 366-5:2006 (reconfirmed) ISO 7220:1996 (reconfirmed) ISO 5247-3:1993 (reconfirmed) ISO 25964-2:2013 ISO 7839:2005 (reconfirmed) TC 54 Essential oils ISO 8116-1:1995 (reconfirmed) ISO 8117:2003 (reconfirmed) ISO 10115:2013 ISO 8118-1:2006 (reconfirmed) TC 59 Buildings and civil engineering works ISO 8118-2:2006 (reconfirmed) ISO 3443-3:1987 (reconfirmed) ISO 8119-1:1989 (reconfirmed) ISO 3443-5:1982 (reconfirmed) ISO 8119-2:1989 (reconfirmed) ISO/TR 21932:2013 ISO 8121:2007 (reconfirmed) TC 61 Plastics ISO 8122:2003 (reconfirmed) ISO 3451-3:1984 (reconfirmed) ISO 8188:2007 (reconfirmed) ISO 6427:2013 ISO 8640-1:2004 (reconfirmed) ISO 11357-5:2013 ISO 8640-2:2004 (reconfirmed) ISO 4892-2:2013 ISO 8640-3:2002 (reconfirmed) ISO 1622-1:2012 ISO 9473-1:2006 (reconfirmed) ISO 1624:2001 (reconfirmed) ISO 9473-2:2006 (reconfirmed) ISO 1628-6:1990 (reconfirmed) ISO 10223:2005 (reconfirmed) ISO 2561:2012 ISO 11675:2005 (reconfirmed) ISO 11468:1997 (reconfirmed) ISO 13990-1:2006 (reconfirmed) ISO 12418-1:2012 ISO 13990-2:2006 (reconfirmed) ISO 12418-2:2012 ISO 13990-3:2006 (reconfirmed) ISO 4597-1:2005 (reconfirmed) ISO 14500:2003 (reconfirmed) ISO 7808:1992 (reconfirmed) ISO 15228:2005 (reconfirmed) ISO 8619:2003 (reconfirmed) TC 76 Transfusion, infusion and injection, and ISO 8987:2005 (reconfirmed) blood processing equipment for medi- cal and pharmaceutical use ISO 10724-1:1998 (reconfirmed) ISO 15010:1998 (reconfirmed) ISO 10724-2:1998 (reconfirmed) TC 83 Sports and other recreational facilities ISO 11248:1993 (reconfirmed) and equipment ISO 11401:1993 (reconfirmed) ISO 5902:2013 ISO 11409:1993 (reconfirmed) ISO 6265:2013 ISO 14848:1998 (reconfirmed) ISO 6266:2013 TC 67 Materials, equipment and offshore TC 85 Nuclear energy, nuclear technologies, structures for petroleum, petrochemi- and radiological protection cal and natural gas industries ISO/ASTM ISO 10407:1993 (reconfirmed) 51261:2013 ISO 10424-2:2007

16 ISO Update, Supplement to ISO Focus -- July 2018 ISO/ASTM TC 138 Plastics pipes, fittings and valves for 51631:2013 the transport of fluids ISO/ASTM ISO 15398:2012 51702:2013 ISO 8361-1:1991 (reconfirmed) ISO/ASTM 51940:2013 ISO 8361-3:1991 (reconfirmed) ISO/ASTM TC 153 Valves 52116:2013 ISO 5209:1977 (reconfirmed) ISO 11665-7:2012 ISO 10631:2013 ISO 15080:2001 (reconfirmed) ISO 28921-1:2013 TC 94 Personal safety -- Personal protective TC 163 Thermal performance and energy use equipment in the built environment ISO 15383:2001 (reconfirmed) ISO 12655:2013 ISO 15538:2001 (reconfirmed) TC 171 Document management applications TC 106 Dentistry ISO 446:2004 (reconfirmed) ISO 10323:2013 TC 172 Optics and photonics ISO 16635-1:2013 ISO 8255-2:2013 TC 108 Mechanical vibration, shock and condi- ISO 11553-3:2013 tion monitoring ISO 13695:2004 (reconfirmed) ISO 6070:1981 (reconfirmed) TC 206 Fine ceramics TC 111 Round steel link chains, chain slings, ISO 11894-1:2013 components and accessories ISO 13125:2013 ISO 3056:1986 (reconfirmed) ISO 14574:2013 ISO 7593:1986 (reconfirmed) TC 207 Environmental management TC 113 Hydrometry ISO 14066:2011 ISO 4359:2013 TC 211 Geographic information/Geomatics TC 115 Pumps ISO 19105:2000 (reconfirmed) ISO 21049:2004 ISO 19144-2:2012 TC 119 Powder metallurgy TC 213 Dimensional and geometrical product ISO 4491-4:2013 specifications and verification ISO 13517:2013 ISO 4288:1996 (reconfirmed) ISO 7625:2012 ISO 7863:1984 (reconfirmed) TC 120 Leather ISO ISO 14930:2012 16610-85:2013 ISO 16131:2012 TC 274 Light and lighting TC 122 Packaging ISO 8995-1:2002 (reconfirmed) ISO 3394:2012 TC 309 Governance of organizations ISO 3676:2012 ISO 19600:2014 TC 123 Plain bearings IULTCS International Union of Leather Tech- ISO 12128:2001 (reconfirmed) nologists and Chemists Societies TC 126 Tobacco and tobacco products ISO 11641:2012 ISO 3308:2012 ISO 11642:2012 ISO 3401:1991 (reconfirmed) ISO 14268:2012 ISO 10315:2013 ISO 15702:1998 (reconfirmed) ISO 15592-2:2001 (reconfirmed) ISO 15703:1998 (reconfirmed) ISO 15592-3:2008 (reconfirmed) ISO 17131:2012 ISO 15593:2001 (reconfirmed) ISO 17226-3:2011 ISO 22303:2008 (reconfirmed) ISO 17234-2:2011 TC 127 Earth-moving machinery JTC 1 Information technology ISO 2860:1992 (reconfirmed) ISO/IEC 18000-6:2013 ISO 3471:2008 ISO/IEC ISO 10264:1990 (reconfirmed) 24769-5:2012 TC 131 Fluid power systems ISO/IEC ISO 4392-1:2002 (reconfirmed) 24770:2012 TC 135 Non-destructive testing ISO/IEC 24791-5:2012 ISO 11699-1:2008 (reconfirmed)

ISO Update, Supplement to ISO Focus -- July 2018 17 Standards withdrawn

Period from 01 June to 30 June 2018

TC 106 Dentistry ISO 6875:2011 (replaced by ISO 7494-1:2018) TC 108 Mechanical vibration, shock and condi- tion monitoring ISO 7919-4:2009 (replaced by ISO 20816-4:2018) ISO 7919-4:2009/ (replaced by ISO 20816-4:2018) Amd 1:2017 ISO 10816-4:2009 (replaced by ISO 20816-4:2018) ISO 10816-4:2009/ (replaced by ISO 20816-4:2018) Amd 1:2017 TC 171 Document management applications ISO 14641-1:2012 (replaced by ISO 14641:2018) TC 182 Geotechnics ISO/TS (replaced by ISO 17892-12:2018) 17892-12:2004 TC 204 Intelligent transport systems ISO/TS (replaced by ISO 17427-1:2018) 17427:2014 TC 215 Health informatics ISO 11238:2012 (replaced by ) ISO/TS (replaced by ) 19844:2016 JTC 1 Information technology ISO/IEC (replaced by ISO/IEC 14763-2:2012) 14763-1:1999 ISO/IEC 14763- (replaced by ISO/IEC 14763-2:2012) 1:1999/Amd 1:2004 ISO/IEC (replaced by ISO/IEC 14763-2:2012) 18010:2002 ISO/IEC (replaced by ISO/IEC 14763-2:2012) 18010:2002/Amd 1:2005

Meeting calendar

The meeting calendar is available at https://www.iso.org/meeting-calendar.html

18 ISO Update, Supplement to ISO Focus -- July 2018