DOCSLIB.ORG

Thames Freight Standard)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Thames Freight Standard) PORT OF LONDON AUTHORITY TECHNICAL STANDARDS FOR COMMERCIAL VESSELS ON THE TIDAL THAMES (THAMES FREIGHT STANDARD) 1st Edition ISBN Number: 978-0-900598-14-2 © Port of London Authority 2013 CONTENTS 1. FOREWORD ..................................................................................................... 1 2. DEFINITIONS .................................................................................................... 3 3. APPLICATION AND INTERPRETATION .......................................................... 8 3.1. Application ................................................................................................. 8 3.2. Areas of Operation ..................................................................................... 8 3.3. Licenses .................................................................................................... 8 3.4. Interpretation .............................................................................................. 8 3.5. The Right of Appeal ................................................................................... 8 3.6. Updating the Thames Freight Standard ..................................................... 9 3.7. Alternative Safety Standards ...................................................................... 9 3.8. Equivalent Standards ................................................................................. 9 3.9. Carriage of Additional Equipment ............................................................. 10 4. CONSTRUCTION AND STRUCTURAL STRENGTH...................................... 11 4.1. Structural Strength ................................................................................... 11 4.2. Construction Materials ............................................................................. 11 4.3. Wheelhouse Visibility ............................................................................... 12 4.4. Bulkheads ................................................................................................ 12 4.5. Weather Deck .......................................................................................... 13 4.6. Inflatable and Rigid Hull Inflatable Boats .................................................. 14 5. WEATHERTIGHT / WATERTIGHT INTEGRITY ............................................. 16 5.1. Hatchways and Hatches .......................................................................... 16 5.2. Doorways and Companionways Located Above the Weather Deck ......... 16 5.3. Skylights .................................................................................................. 17 5.4. Portlights and Windows ........................................................................... 17 5.5. Ventilators and Exhausts ......................................................................... 18 5.6. Air Pipes .................................................................................................. 18 5.7. Sea Inlets and Discharges ....................................................................... 18 5.8. Materials for Valves and Associated Piping ............................................. 19 5.9. General Equivalence ................................................................................ 19 6. WATER FREEING ARRANGEMENTS ........................................................... 20 7. MACHINERY ................................................................................................... 21 7.1. Machinery Installations ............................................................................ 21 7.2. Engine Exhaust System ........................................................................... 22 i 1st Edition 1 June 2013 7.3. Fuel Tanks, Oil Tanks, Pipes and Accessories ........................................ 22 7.4. Arrangements For Fuel, Lubricating Oil and Other Flammable Oils ......... 24 7.5. Oily-Water and Waste Oil ......................................................................... 25 7.6. Portable Equipment ................................................................................. 25 7.7. Petrol Engines ......................................................................................... 26 7.8. Stowage of Petrol .................................................................................... 27 8. ELECTRICAL ARRANGEMENTS ................................................................... 28 8.1. New Builds ............................................................................................... 28 8.2. All Existing Vessels .................................................................................. 28 8.3. Batteries .................................................................................................. 29 8.4. Earthing ................................................................................................... 31 8.5. Cables ..................................................................................................... 32 8.6. Location of Electrical Distribution / Switchboards ..................................... 33 8.7. Distribution Systems ................................................................................ 34 8.8. Switchgear Installations ........................................................................... 34 8.9. Switches and Protective Devices ............................................................. 35 8.10. Lighting Installations ................................................................................ 35 8.11. Alarm and Safety Systems For Mechanical Equipment ............................ 36 8.12. Connection to Shore or Other External Networks ..................................... 36 8.13. Power Supply to Other Vessels................................................................ 37 8.14. Generators and Motors ............................................................................ 37 8.15. Measuring and Monitoring Devices .......................................................... 37 8.16. Installation Fittings ................................................................................... 38 8.17. Electromagnetic Compatibility .................................................................. 38 8.18. Hazardous Spaces Other Than Enginerooms .......................................... 38 8.19. Protection Against Physical Contact, Intrusion of Solid Objects and the Ingress of Water ...................................................................................... 39 8.20. Maximum Permissible Voltages ............................................................... 40 8.21. Additional Requirements for Existing Vessels 24 metres and Over Load Line Length ............................................................................................. 41 9. STEERING GEAR, RUDDER AND PROPELLER SYSTEMS ......................... 42 9.1. General .................................................................................................... 42 9.2. Steering ................................................................................................... 42 9.3. Rudder System ........................................................................................ 42 9.4. Propeller System ..................................................................................... 42 10. BILGE PUMPING ............................................................................................ 43 10.1. Bilge Pumping and Drainage Systems ..................................................... 43 ii 1st Edition 1 June 2013 10.2. Powered Vessels 24 metres and Over Load Line Length ......................... 43 10.3. Powered Vessels Less Than 24 metres Load Line Length. ...................... 44 10.4. Unpowered Vessels ................................................................................. 44 11. STABILITY ...................................................................................................... 45 11.1. General .................................................................................................... 45 11.2. Dry Cargo Vessels ................................................................................... 45 11.3. Vessels Fitted With a Lifting Device ......................................................... 45 11.4. Vessels Engaged in Towing ..................................................................... 46 11.5. Tankers .................................................................................................... 46 12. FREEBOARD, FREEBOARD MARKING AND DRAUGHT MARKS AND SCALES ........................................................................................................ 47 12.1. Safety Clearance ..................................................................................... 47 12.2. Freeboard ................................................................................................ 47 12.3. Draught Marks (Vessels 24 metres and over load line length or vessels carrying cargo in excess of 1000kg) ........................................................ 47 12.4. Freeboard Marks (Vessels greater than 13.7 metres LOA, but less than 24 metres load line length, or vessels carrying cargo less than 1000kg) . 50 12.5. Inflatable Boats and Rigid Inflatable Boats ............................................... 50 12.6. Draught Scales ........................................................................................ 51 13. LIFE-SAVING APPLIANCES .........................................................................
Load more

Recommended publications
  • The Navy Turns 245
    The Navy Turns 245 "A good Navy is not a provocation to war. It is the surest guaranty of peace." - Theodore Roosevelt "I can imagine no more rewarding a career. And any man who may be asked in this century what he did to make his life worthwhile, I think can respond with a good deal of pride and satisfaction: 'I served in the United States Navy.'" - John F. Kennedy October 13 marks the birthday of the U.S. Navy, which traces its roots back to the early days of the American Revolution. On October 13, 1775, the Continental Congress established a naval force, hoping that a small fleet of privateers could attack British commerce and offset British sea power. The early Continental navy was designed to work with privateers to wage tactical raids against the transports that supplied British forces in North America. To accomplish this mission the Continental Congress purchased, converted, and constructed a fleet of small ships -- frigates, brigs, sloops, and schooners. These navy ships sailed independently or in pairs, hunting British commerce ships and transports. Two years after the end of the war, the money-poor Congress sold off the last ship of the Continental navy, the frigate Alliance. But with the expansion of trade and shipping in the 1790s, the possibility of attacks of European powers and pirates increased, and in March 1794 Congress responded by calling for the construction of a half-dozen frigates, The United States Navy was here to stay With thousands of ships and aircraft serving worldwide, the U.S. Navy is a force to be reckoned with.
    [Show full text]
  • Service Operations Vessel 9020 Standard
    1. Click with cursor in the blank space above 2. Drag & Drop Picture (16:9 ratio) 3. Optional: add hyperlink to Damen.com product page to the picture SERVICE OPERATIONS VESSEL 9020 STANDARD PICTURE OF SIMILAR VESSEL GENERAL DECK LAY-OUT Basic functions To provide stepless access onto Lift 2 tonne lift connecting 4 access levels (option: 6) for continuous windfarm assets for technicians, tools access between warehouse, weather deck and WTG via optional and parts by access system, crane and gangway. daughter craft. in both Construction Pedestals - for optional crane Support and Service Operations. - for optional gangway system Classification DNV-GL Maritime, notation: Helicopter winch area on foreship, stepless access to warehouse, hospital. Option: X 1A1, Offshore Service Vessel, helideck D-size 21m COMF(C-3, V-3), DYNPOS(AUTR), CTV landing facilities 1 fixed steel landing at stern. Clean, SF, E0, DK(+), SPS, NAUT(OSV- 1 removable alum. landing SB / PS. A), BWM(T), Recyclable, Crane Flag ACCOMMODATION Owner Crew/ special personnel 15-20x crew, 40-45x SP, all single cabins provided with WiFi, LAN, telephone and audio / video entert. (VOD and sat. TV). DIMENSIONS Other facilities up to 6 Offices and 5 meeting/ conference rooms for Charterer’s Length overall 89.65 m use. Beam moulded 20.00 m 2 Recr.-dayrooms, reception, hospital, drying rooms (M/F), Depth moulded 8.00 m changing rooms (M/F), wellness area (gym and sauna). Draught base (u.s. keel) 4.80 (6.30) m Gross Tonnage 6100 GT NAUTICAL AND COMMUNICATION EQUIPMENT Nautical Radar X-band + S-band, ECDIS, Conning, GMDSS Area 1, 2 and CAPACITIES 3.
    [Show full text]
  • User's Manual
    Talamex inflatable boats – User’s manual TLM-GB2021-01 Pagina 1 van 17 Talamex inflatable boats – User’s manual Contents 1. General ............................................................................................................................................................ 3 1.1 Introduction ................................................................................................................................................. 3 1.2 Design categories ........................................................................................................................................ 3 1.3 Capacity plate.............................................................................................................................................. 4 1.4 National legislation ..................................................................................................................................... 4 1.5 General safety information .......................................................................................................................... 4 2. Specifications, description and features ............................................................................................................... 4 2.1 Specifications .............................................................................................................................................. 4 2.2 Boat model .................................................................................................................................................
    [Show full text]
  • Lake Assault Rigid Hull Inflatable Boat (Rhib)
    LAKE ASSAULT RIGID HULL INFLATABLE BOAT (RHIB) 24 FOOT RHIB PATROL BOAT- PRELIMINARY SPECIFICATIONS THE LAKE ASSAULT RHIB CRAFT is engineered to deliver fast and nimble patrol and emergency response for law enforcement organizations. The fully welded, lightweight boat is highly maneuverable and able to operate in shallow water situations. Available in either a T-Top or fully-enclosed pilothouse, it features an optional bow-to-beach access door and ladder at the front “V” of the craft. Available in hull lengths from 22- to 36 feet, the RHIB’s heavy-duty buoyancy tube is offered in a variety of configurations. Fully-Enclosed Pilothouse Open Center Console T-Top with optional bow door deployed. GENERAL SPECIFICATIONS HULL DESIGN & OUTFITTING - continued 1. Hull Length (does not include outboard engines, engine guard, or collar) 5. Six (6) 10” welded aluminum cleats. 2. Beam 9 feet 0 inches including collar. 6. Bottom plating .250” 5083 or 5086-H116 aluminum. 3. Overall height not to exceed 13’6” while on trailer and attached to a tow vehicle. 7. Side plating .190” 5083 or 5086-H32 aluminum. 4. Draft should not exceed 21 inches with motors trimmed up and 28 inches with 8. Deck plating .124” 5052-H32 aluminum smooth plate. motors trimmed down. 9. Deck structure and component material are fully welded to the hull and all 5. Person and cargo capacity 3,000 lbs approx. deck height transverse bulkheads and longitudinal girders to contribute to the 6. Boat weight 5,500 lbs approx. strength of the hull. Floor is supported by 2x2 square tubing.
    [Show full text]
  • ACHILLES INFLATABLE BOATS a Division of Achilles USA, Inc
    2018 INFLATABLE BOATS It begins with the best fabric. Designed and built with safety Because our boats last, Our quality CSM fabric has and performance in mind. so does our support. such a great reputation in the From built-in safety features like We provide our dealers and inflatable boat industry that the strongest four-layer seam customers with comprehensive other inflatable boat manufac- construction in the industry to and responsive post-sales turers buy their fabric from us. custom designs engineered to support in every aspect of It all starts with an exterior complement and enhance the Achilles ownership. Our The Achilles boating experience begins with best inflatable coating of our custom CSM performance of each of our customer and mobile-friendly boat fabric, designs and options and ends with unsurpassed over a heavy duty fabric which boats, boaters get more out of web site not only offers customer support for as long as you own your boat. makes our inflatables virtually an Achilles. Our boats are built comprehensive information In between you will enjoy years of on-the-water activities impervious to the elements, oil, to not only last, but to also about our current models, in the most durable inflatable boat you can find. gasoline and abrasions. And it deliver the practicality you but also on all Achilles boats ends with two interior coatings expect from an inflatable with- produced since 1978. of Chloroprene for unsurpassed out sacrificing the performance CSM exterior for air retention. you want from any boat. toughness www.achillesboats.com Heavy-duty Nylon or Polyester core fabric A SMOOTH, SIMPLE OAR SYSTEM NON-CORROSIVE CHECK VALVES Two layers of Chloroprene We invented the fold-down, locking oar system All Achilles valves are non-corrosive with no moving for unsurpassed that makes rowing a breeze while keeping oars parts that might break.
    [Show full text]
  • SIMPLIFIED MEASUREMENT TONNAGE FORMULAS (46 CFR SUBPART E) Prepared by U.S
    SIMPLIFIED MEASUREMENT TONNAGE FORMULAS (46 CFR SUBPART E) Prepared by U.S. Coast Guard Marine Safety Center, Washington, DC Phone (202) 366-6441 GROSS TONNAGE NET TONNAGE SAILING HULLS D GROSS = 0.5 LBD SAILING HULLS 100 (PROPELLING MACHINERY IN HULL) NET = 0.9 GROSS SAILING HULLS (KEEL INCLUDED IN D) D GROSS = 0.375 LBD SAILING HULLS 100 (NO PROPELLING MACHINERY IN HULL) NET = GROSS SHIP-SHAPED AND SHIP-SHAPED, PONTOON AND CYLINDRICAL HULLS D D BARGE HULLS GROSS = 0.67 LBD (PROPELLING MACHINERY IN 100 HULL) NET = 0.8 GROSS BARGE-SHAPED HULLS SHIP-SHAPED, PONTOON AND D GROSS = 0.84 LBD BARGE HULLS 100 (NO PROPELLING MACHINERY IN HULL) NET = GROSS 1. DIMENSIONS. The dimensions, L, B and D, are the length, breadth and depth, respectively, of the hull measured in feet to the nearest tenth of a foot. See the conversion table on the back of this form for converting inches to tenths of a foot. LENGTH (L) is the horizontal distance between the outboard side of the foremost part of the stem and the outboard side of the aftermost part of the stern, excluding rudders, outboard motor brackets, and other similar fittings and attachments. BREADTH (B) is the horizontal distance taken at the widest part of the hull, excluding rub rails and deck caps, from the outboard side of the skin (outside planking or plating) on one side of the hull, to the outboard side of the skin on the other side of the hull. DEPTH (D) is the vertical distance taken at or near amidships from a line drawn horizontally through the uppermost edges of the skin (outside planking or plating) at the sides of the hull (excluding the cap rail, trunks, cabins, deck caps, and deckhouses) to the outboard face of the bottom skin of the hull, excluding the keel.
    [Show full text]
  • A Study of the Size of Nuclear Fuel Carriers, the Most Required Ships for Safety : How Large Can Ship's Tonnage Be? Azusa Fukasawa World Maritime University
    World Maritime University The Maritime Commons: Digital Repository of the World Maritime University World Maritime University Dissertations Dissertations 2013 A study of the size of nuclear fuel carriers, the most required ships for safety : how large can ship's tonnage be? Azusa Fukasawa World Maritime University Follow this and additional works at: http://commons.wmu.se/all_dissertations Part of the Risk Analysis Commons Recommended Citation Fukasawa, Azusa, "A study of the size of nuclear fuel carriers, the most required ships for safety : how large can ship's tonnage be?" (2013). World Maritime University Dissertations. 228. http://commons.wmu.se/all_dissertations/228 This Dissertation is brought to you courtesy of Maritime Commons. Open Access items may be downloaded for non-commercial, fair use academic purposes. No items may be hosted on another server or web site without express written permission from the World Maritime University. For more information, please contact [email protected]. WORLD MARITIME UNIVERSITY Malmö, Sweden A STUDY OF THE SIZE OF NUCLEAR FUEL CARRIERS, THE MOST REQUIRED SHIP FOR SAFETY How large can ship’s tonnage be? By AZUSA FUKASAWA Japan A dissertation submitted to the World Maritime University in partial fulfilment of the requirements for the award of the degree of MASTER OF SCIENCE In MARITIME AFFAIRS (MARITIME SAFETY AND ENVIRONMENTAL ADMINISTRATION) 2013 Copyright Azusa Fukasawa, 2013 DECLARATION I certify that all the material in this dissertation that is not my own work has been identified, and that no material is included for which a degree has previously been conferred on me. The contents of this dissertation reflect my own personal views, and are not necessarily endorsed by the University.
    [Show full text]
  • Inflatable Boats
    ® INFLATABLE BOATS Including the following Model Series: Fish Hunter™, Super Caravelle, Caravelle, Colossus™ and HUI READ THE FOLLOWING INFLATABLE BOATS ® INSTRUCTIONS AND WARNINGS TO AVOID DROWNING OR SERIOUS INJURY WARNING: • Not a life saving device. • Not for use by children without adult supervision. • Always wear an approved Personal Flotation Device (Life Preserver). • Do not overload. • Never tow from another boat or vehicle. • Use only in water away from debris and obstructions. • Do not use in high wind, strong currents, open water or dangerous tides. • Be familiar with the area you intend to use the boat. • Never allow diving into or from these boats. • Never leave in or near water when not in use. • Know and follow local water safety rules and boating regulations. • Use only in protected waters. • Do not use this product under the influence of alcohol or drugs. • Do not over inflate. • Follow inflation sequence on the product. IMPORTANT INFORMATION The warnings below relate to various situations. Please observe them. CAUTION! Denotes a imminent hazard which will result in severe injury if you do not comply with the instructions. WARNING! Reminds you of safety measures which must be observed. Also denotes unsafe practices which could result in personal injury or INFLATABLE BOATS damage to the product or property, if you do not comply with the ® instructions. CAUTION! It is the owner's responsibility to make sure all users carefully read and follow the instructions for safe operation of this product. Observe all local and national laws. Always wear a Personal Flotation Device approved by the proper authorities. Please carefully observe the Capacity Plate information which is printed on the product.
    [Show full text]
  • Branch's Elements of Shipping/Alan E
    ‘I would strongly recommend this book to anyone who is interested in shipping or taking a course where shipping is an important element, for example, chartering and broking, maritime transport, exporting and importing, ship management, and international trade. Using an approach of simple analysis and pragmatism, the book provides clear explanations of the basic elements of ship operations and commercial, legal, economic, technical, managerial, logistical, and financial aspects of shipping.’ Dr Jiangang Fei, National Centre for Ports & Shipping, Australian Maritime College, University of Tasmania, Australia ‘Branch’s Elements of Shipping provides the reader with the best all-round examination of the many elements of the international shipping industry. This edition serves as a fitting tribute to Alan Branch and is an essential text for anyone with an interest in global shipping.’ David Adkins, Lecturer in International Procurement and Supply Chain Management, Plymouth Graduate School of Management, Plymouth University ‘Combining the traditional with the modern is as much a challenge as illuminating operations without getting lost in the fascination of the technical detail. This is particularly true for the world of shipping! Branch’s Elements of Shipping is an ongoing example for mastering these challenges. With its clear maritime focus it provides a very comprehensive knowledge base for relevant terms and details and it is a useful source of expertise for students and practitioners in the field.’ Günter Prockl, Associate Professor, Copenhagen Business School, Denmark This page intentionally left blank Branch’s Elements of Shipping Since it was first published in 1964, Elements of Shipping has become established as a market leader.
    [Show full text]
  • 2021 Connecticut Boater's Guide Rules and Resources
    2021 Connecticut Boater's Guide Rules and Resources In The Spotlight Updated Launch & Pumpout Directories CONNECTICUT DEPARTMENT OF ENERGY & ENVIRONMENTAL PROTECTION HTTPS://PORTAL.CT.GOV/DEEP/BOATING/BOATING-AND-PADDLING YOUR FULL SERVICE YACHTING DESTINATION No Bridges, Direct Access New State of the Art Concrete Floating Fuel Dock Offering Diesel/Gas to Long Island Sound Docks for Vessels up to 250’ www.bridgeportharbormarina.com | 203-330-8787 BRIDGEPORT BOATWORKS 200 Ton Full Service Boatyard: Travel Lift Repair, Refit, Refurbish www.bridgeportboatworks.com | 860-536-9651 BOCA OYSTER BAR Stunning Water Views Professional Lunch & New England Fare 2 Courses - $14 www.bocaoysterbar.com | 203-612-4848 NOW OPEN 10 E Main Street - 1st Floor • Bridgeport CT 06608 [email protected] • 203-330-8787 • VHF CH 09 2 2021 Connecticut BOATERS GUIDE We Take Nervous Out of Breakdowns $159* for Unlimited Towing...JOIN TODAY! With an Unlimited Towing Membership, breakdowns, running out GET THE APP IT’S THE of fuel and soft ungroundings don’t have to be so stressful. For a FASTEST WAY TO GET A TOW year of worry-free boating, make TowBoatU.S. your backup plan. BoatUS.com/Towing or800-395-2628 *One year Saltwater Membership pricing. Details of services provided can be found online at BoatUS.com/Agree. TowBoatU.S. is not a rescue service. In an emergency situation, you must contact the Coast Guard or a government agency immediately. 2021 Connecticut BOATER’S GUIDE 2021 Connecticut A digest of boating laws and regulations Boater's Guide Department of Energy & Environmental Protection Rules and Resources State of Connecticut Boating Division Ned Lamont, Governor Peter B.
    [Show full text]
  • Course Objectives Chapter 2 2. Hull Form and Geometry
    COURSE OBJECTIVES CHAPTER 2 2. HULL FORM AND GEOMETRY 1. Be familiar with ship classifications 2. Explain the difference between aerostatic, hydrostatic, and hydrodynamic support 3. Be familiar with the following types of marine vehicles: displacement ships, catamarans, planing vessels, hydrofoil, hovercraft, SWATH, and submarines 4. Learn Archimedes’ Principle in qualitative and mathematical form 5. Calculate problems using Archimedes’ Principle 6. Read, interpret, and relate the Body Plan, Half-Breadth Plan, and Sheer Plan and identify the lines for each plan 7. Relate the information in a ship's lines plan to a Table of Offsets 8. Be familiar with the following hull form terminology: a. After Perpendicular (AP), Forward Perpendiculars (FP), and midships, b. Length Between Perpendiculars (LPP or LBP) and Length Overall (LOA) c. Keel (K), Depth (D), Draft (T), Mean Draft (Tm), Freeboard and Beam (B) d. Flare, Tumble home and Camber e. Centerline, Baseline and Offset 9. Define and compare the relationship between “centroid” and “center of mass” 10. State the significance and physical location of the center of buoyancy (B) and center of flotation (F); locate these points using LCB, VCB, TCB, TCF, and LCF st 11. Use Simpson’s 1 Rule to calculate the following (given a Table of Offsets): a. Waterplane Area (Awp or WPA) b. Sectional Area (Asect) c. Submerged Volume (∇S) d. Longitudinal Center of Flotation (LCF) 12. Read and use a ship's Curves of Form to find hydrostatic properties and be knowledgeable about each of the properties on the Curves of Form 13. Calculate trim given Taft and Tfwd and understand its physical meaning i 2.1 Introduction to Ships and Naval Engineering Ships are the single most expensive product a nation produces for defense, commerce, research, or nearly any other function.
    [Show full text]
  • NOAA Form 57-19-01 Annual Small Boat Evaluation/Small Boat
    NOAA Form 57-19-01 U.S. DEPARTMENT OF COMMERCE (1-13) Page 1 of 9 NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION ANNUAL SMALL BOAT EVALUATION/SMALL BOAT EXAMINATION Instructions Annual Small Boat Evaluation (ASBE) is an inspection conducted by Vessel Operations Coordinator (VOC), Commanding Officer (CO), or designee(s). All boats shall be inspected annually. • The ASBE checklist has been condensed from the detailed ASBE outline for use in the field. Evaluators shall use the checklists during the inspection, and shall refer to the outline for additional details as needed. Evaluators are responsible for all information contained within the ASBE outline. • The ASBE outline and checklist are based on NAO 209-125, The NOAA Small Boat Standards and Procedures Manual (SBSPM), 46 CFR, 33 CFR, NFPA 302, MARPOL, ABYC standards and recommendations, United States Coast Guard (USCG) inspection criteria, and standard marine survey practices. Small Boat Examination (SBEX) is an examination conducted by the Small Boat Program or a certified Marine Surveyor. Class I boats shall be examined every three (3) years and Class II boats shall be examined every two (2) years. • Some items may not apply to all boats. Evaluators are responsible for determining applicability. Consult the SBSPM for equipment carriage requirements. Installed equipment in excess of requirements must be maintained to inspection standards. • Completed evaluation checklists, reports, records of findings, and recommendations shall be signed by the evaluator or surveyor; signed and retained by the VOC with a copy forwarded to and signed by the Line Office Small Boat Officer (LOSBO). Completed evaluations shall be submitted to the NOAA Small Boat Program (SBP) Coordinator.
    [Show full text]