DOCSLIB.ORG

Service Operations Vessel 9020 Standard

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Service Operations Vessel 9020 Standard 1. Click with cursor in the blank space above 2. Drag & Drop Picture (16:9 ratio) 3. Optional: add hyperlink to Damen.com product page to the picture SERVICE OPERATIONS VESSEL 9020 STANDARD PICTURE OF SIMILAR VESSEL GENERAL DECK LAY-OUT Basic functions To provide stepless access onto Lift 2 tonne lift connecting 4 access levels (option: 6) for continuous windfarm assets for technicians, tools access between warehouse, weather deck and WTG via optional and parts by access system, crane and gangway. daughter craft. in both Construction Pedestals - for optional crane Support and Service Operations. - for optional gangway system Classification DNV-GL Maritime, notation: Helicopter winch area on foreship, stepless access to warehouse, hospital. Option: X 1A1, Offshore Service Vessel, helideck D-size 21m COMF(C-3, V-3), DYNPOS(AUTR), CTV landing facilities 1 fixed steel landing at stern. Clean, SF, E0, DK(+), SPS, NAUT(OSV- 1 removable alum. landing SB / PS. A), BWM(T), Recyclable, Crane Flag ACCOMMODATION Owner Crew/ special personnel 15-20x crew, 40-45x SP, all single cabins provided with WiFi, LAN, telephone and audio / video entert. (VOD and sat. TV). DIMENSIONS Other facilities up to 6 Offices and 5 meeting/ conference rooms for Charterer’s Length overall 89.65 m use. Beam moulded 20.00 m 2 Recr.-dayrooms, reception, hospital, drying rooms (M/F), Depth moulded 8.00 m changing rooms (M/F), wellness area (gym and sauna). Draught base (u.s. keel) 4.80 (6.30) m Gross Tonnage 6100 GT NAUTICAL AND COMMUNICATION EQUIPMENT Nautical Radar X-band + S-band, ECDIS, Conning, GMDSS Area 1, 2 and CAPACITIES 3. Ballast water 1130 m3 incl. roll red.tank DP-system DP-2 with Laser, Radar and 2xDGPS pos.ref.sys. With wind farm Fuel oil (service + cargo) 545 + 345 m3 route planning and high-speed autotrack. Fr. water (potable + cargo) 180 + 430 m3 Deadweight (depending on 2300 t at design dr. 4.65m, OPTIONS options selected) Offshore crane up to 6t, 3D motion comp. kn.boom crane. Cargo weather deck area 425m2 (11 x 20ft cont.) Gangway access system 3D motion-compensated gangway from several OEM. Covered warehouse areas 390m2 (6 x 20ft cont.; level Height adj. gangway pedestal for height adjustment of gangway centre platform. floors) Includes lift upgrade. Max.deck load 1 m ab.deck 600 t Hybrid drive Battery package replacing one genset. Total inst. gen. Dangerous Goods Helifuel in up to 6 transportable tanks. power 5500 ekW. Packaged DG (not for trade) in CTV refueling at CTV landing to SB. paint/IMDG store. Targetless DP pos.ref.system Guidance Marine RangeGuard. Daughter craft, operability 1.2m Hs Tuco 11m windfarm. service boat. PERFORMANCES Daughter craft, increased operability Tuco 15m windfarm service boat with passive gangway. Speed @ summer draught 13.0 / 12.0 kn max / eco 1.5m Hs Upgrade of nr of POB to 90 Double occup. of 30 SP-cabins; lifeboats. ERN* 99,99,98,97 Upgrade winch area to Helicopter D-factor 21 m, max. take-off weight 12t, day- and night Endurance 30 days deck landings. Helicopter re- / de-fuelling Jet A and Jet A1, cap. 4m3 PROPULSION SYSTEM Add’l Class notations COMF(C-2, V-2), Clean (Design), BIS, HELDK. Main propulsion Diesel-electric, 690 V, 60 Hz Propulsion 2x azi thruster (ducted, FP) 2150 kW ea Bow thrusters 2x 860 kW fixed + 1x 860 kW retractable ELECTRICAL EQUIPMENT Networks 690 V, 440 V and 230 V – 60Hz Main generator sets 4 pcs.- total inst. generating power 6450 ekW (option: 3pcs with hybrid drive) Power philosophy 4-split main busbar with options for closed-bus DP mode and hybrid drive battery package, offering low FO burn, engine fouling and wear. SERVICE OPERATIONS VESSEL 9020 STANDARD 1. Click with cursor in the blank space above 2. Drag & Drop to insert Picture 3. Adjust Size of Picture Avelingen-West 20 P.O. Box 1 phone +31 (0)183 63 99 22 [email protected] 20 0 4202 MS Gorinchem 4200 AA Gorinchem fax +31 (0)183 63 21 89 www.damen.com 2 The Netherlands The Netherlands © No part of the leaflet may be reproduced in any form, by print, photo print, microfilm, or any other means, without written permission from Damen Shipyards Group NOVEMBER.
Load more

Recommended publications
  • SIMPLIFIED MEASUREMENT TONNAGE FORMULAS (46 CFR SUBPART E) Prepared by U.S
    SIMPLIFIED MEASUREMENT TONNAGE FORMULAS (46 CFR SUBPART E) Prepared by U.S. Coast Guard Marine Safety Center, Washington, DC Phone (202) 366-6441 GROSS TONNAGE NET TONNAGE SAILING HULLS D GROSS = 0.5 LBD SAILING HULLS 100 (PROPELLING MACHINERY IN HULL) NET = 0.9 GROSS SAILING HULLS (KEEL INCLUDED IN D) D GROSS = 0.375 LBD SAILING HULLS 100 (NO PROPELLING MACHINERY IN HULL) NET = GROSS SHIP-SHAPED AND SHIP-SHAPED, PONTOON AND CYLINDRICAL HULLS D D BARGE HULLS GROSS = 0.67 LBD (PROPELLING MACHINERY IN 100 HULL) NET = 0.8 GROSS BARGE-SHAPED HULLS SHIP-SHAPED, PONTOON AND D GROSS = 0.84 LBD BARGE HULLS 100 (NO PROPELLING MACHINERY IN HULL) NET = GROSS 1. DIMENSIONS. The dimensions, L, B and D, are the length, breadth and depth, respectively, of the hull measured in feet to the nearest tenth of a foot. See the conversion table on the back of this form for converting inches to tenths of a foot. LENGTH (L) is the horizontal distance between the outboard side of the foremost part of the stem and the outboard side of the aftermost part of the stern, excluding rudders, outboard motor brackets, and other similar fittings and attachments. BREADTH (B) is the horizontal distance taken at the widest part of the hull, excluding rub rails and deck caps, from the outboard side of the skin (outside planking or plating) on one side of the hull, to the outboard side of the skin on the other side of the hull. DEPTH (D) is the vertical distance taken at or near amidships from a line drawn horizontally through the uppermost edges of the skin (outside planking or plating) at the sides of the hull (excluding the cap rail, trunks, cabins, deck caps, and deckhouses) to the outboard face of the bottom skin of the hull, excluding the keel.
    [Show full text]
  • A Study of the Size of Nuclear Fuel Carriers, the Most Required Ships for Safety : How Large Can Ship's Tonnage Be? Azusa Fukasawa World Maritime University
    World Maritime University The Maritime Commons: Digital Repository of the World Maritime University World Maritime University Dissertations Dissertations 2013 A study of the size of nuclear fuel carriers, the most required ships for safety : how large can ship's tonnage be? Azusa Fukasawa World Maritime University Follow this and additional works at: http://commons.wmu.se/all_dissertations Part of the Risk Analysis Commons Recommended Citation Fukasawa, Azusa, "A study of the size of nuclear fuel carriers, the most required ships for safety : how large can ship's tonnage be?" (2013). World Maritime University Dissertations. 228. http://commons.wmu.se/all_dissertations/228 This Dissertation is brought to you courtesy of Maritime Commons. Open Access items may be downloaded for non-commercial, fair use academic purposes. No items may be hosted on another server or web site without express written permission from the World Maritime University. For more information, please contact [email protected]. WORLD MARITIME UNIVERSITY Malmö, Sweden A STUDY OF THE SIZE OF NUCLEAR FUEL CARRIERS, THE MOST REQUIRED SHIP FOR SAFETY How large can ship’s tonnage be? By AZUSA FUKASAWA Japan A dissertation submitted to the World Maritime University in partial fulfilment of the requirements for the award of the degree of MASTER OF SCIENCE In MARITIME AFFAIRS (MARITIME SAFETY AND ENVIRONMENTAL ADMINISTRATION) 2013 Copyright Azusa Fukasawa, 2013 DECLARATION I certify that all the material in this dissertation that is not my own work has been identified, and that no material is included for which a degree has previously been conferred on me. The contents of this dissertation reflect my own personal views, and are not necessarily endorsed by the University.
    [Show full text]
  • Branch's Elements of Shipping/Alan E
    ‘I would strongly recommend this book to anyone who is interested in shipping or taking a course where shipping is an important element, for example, chartering and broking, maritime transport, exporting and importing, ship management, and international trade. Using an approach of simple analysis and pragmatism, the book provides clear explanations of the basic elements of ship operations and commercial, legal, economic, technical, managerial, logistical, and financial aspects of shipping.’ Dr Jiangang Fei, National Centre for Ports & Shipping, Australian Maritime College, University of Tasmania, Australia ‘Branch’s Elements of Shipping provides the reader with the best all-round examination of the many elements of the international shipping industry. This edition serves as a fitting tribute to Alan Branch and is an essential text for anyone with an interest in global shipping.’ David Adkins, Lecturer in International Procurement and Supply Chain Management, Plymouth Graduate School of Management, Plymouth University ‘Combining the traditional with the modern is as much a challenge as illuminating operations without getting lost in the fascination of the technical detail. This is particularly true for the world of shipping! Branch’s Elements of Shipping is an ongoing example for mastering these challenges. With its clear maritime focus it provides a very comprehensive knowledge base for relevant terms and details and it is a useful source of expertise for students and practitioners in the field.’ Günter Prockl, Associate Professor, Copenhagen Business School, Denmark This page intentionally left blank Branch’s Elements of Shipping Since it was first published in 1964, Elements of Shipping has become established as a market leader.
    [Show full text]
  • Course Objectives Chapter 2 2. Hull Form and Geometry
    COURSE OBJECTIVES CHAPTER 2 2. HULL FORM AND GEOMETRY 1. Be familiar with ship classifications 2. Explain the difference between aerostatic, hydrostatic, and hydrodynamic support 3. Be familiar with the following types of marine vehicles: displacement ships, catamarans, planing vessels, hydrofoil, hovercraft, SWATH, and submarines 4. Learn Archimedes’ Principle in qualitative and mathematical form 5. Calculate problems using Archimedes’ Principle 6. Read, interpret, and relate the Body Plan, Half-Breadth Plan, and Sheer Plan and identify the lines for each plan 7. Relate the information in a ship's lines plan to a Table of Offsets 8. Be familiar with the following hull form terminology: a. After Perpendicular (AP), Forward Perpendiculars (FP), and midships, b. Length Between Perpendiculars (LPP or LBP) and Length Overall (LOA) c. Keel (K), Depth (D), Draft (T), Mean Draft (Tm), Freeboard and Beam (B) d. Flare, Tumble home and Camber e. Centerline, Baseline and Offset 9. Define and compare the relationship between “centroid” and “center of mass” 10. State the significance and physical location of the center of buoyancy (B) and center of flotation (F); locate these points using LCB, VCB, TCB, TCF, and LCF st 11. Use Simpson’s 1 Rule to calculate the following (given a Table of Offsets): a. Waterplane Area (Awp or WPA) b. Sectional Area (Asect) c. Submerged Volume (∇S) d. Longitudinal Center of Flotation (LCF) 12. Read and use a ship's Curves of Form to find hydrostatic properties and be knowledgeable about each of the properties on the Curves of Form 13. Calculate trim given Taft and Tfwd and understand its physical meaning i 2.1 Introduction to Ships and Naval Engineering Ships are the single most expensive product a nation produces for defense, commerce, research, or nearly any other function.
    [Show full text]
  • NOAA Form 57-19-01 Annual Small Boat Evaluation/Small Boat
    NOAA Form 57-19-01 U.S. DEPARTMENT OF COMMERCE (1-13) Page 1 of 9 NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION ANNUAL SMALL BOAT EVALUATION/SMALL BOAT EXAMINATION Instructions Annual Small Boat Evaluation (ASBE) is an inspection conducted by Vessel Operations Coordinator (VOC), Commanding Officer (CO), or designee(s). All boats shall be inspected annually. • The ASBE checklist has been condensed from the detailed ASBE outline for use in the field. Evaluators shall use the checklists during the inspection, and shall refer to the outline for additional details as needed. Evaluators are responsible for all information contained within the ASBE outline. • The ASBE outline and checklist are based on NAO 209-125, The NOAA Small Boat Standards and Procedures Manual (SBSPM), 46 CFR, 33 CFR, NFPA 302, MARPOL, ABYC standards and recommendations, United States Coast Guard (USCG) inspection criteria, and standard marine survey practices. Small Boat Examination (SBEX) is an examination conducted by the Small Boat Program or a certified Marine Surveyor. Class I boats shall be examined every three (3) years and Class II boats shall be examined every two (2) years. • Some items may not apply to all boats. Evaluators are responsible for determining applicability. Consult the SBSPM for equipment carriage requirements. Installed equipment in excess of requirements must be maintained to inspection standards. • Completed evaluation checklists, reports, records of findings, and recommendations shall be signed by the evaluator or surveyor; signed and retained by the VOC with a copy forwarded to and signed by the Line Office Small Boat Officer (LOSBO). Completed evaluations shall be submitted to the NOAA Small Boat Program (SBP) Coordinator.
    [Show full text]
  • The IMO Number Explained
    A fact sheet from May 2017 Adam Baske The IMO Number Explained What is an IMO number? The International Maritime Organization (IMO) introduced its Ship Identification Number Scheme in 1987 to help prevent maritime fraud and enhance the security of merchant vessels. It is recognized by regional fisheries organizations and most governments and is considered the best available global identification system for ships. IHS Maritime & Trade, a company based in the U.K., administers the scheme on behalf of the IMO. The unique seven-digit vessel number the company issues to each vessel, preceded by the letters IMO, stays with it until it is scrapped and never changes, regardless of the ship’s owner, country of registration or name. The records based on the IMO number provide an independent audit trail for each vessel. The scheme was applied to fishing vessels in 2013, and the eligibility criteria were amended in 2016 to cover smaller and non-steel hull vessels. Why do fishing vessels need an IMO number? Illegal, unreported, and unregulated fishing worldwide accounts for up to 26 million metric tons of fish annually, worth up to $23.5 billion. IMO numbers are an essential tool in the fight against illegal fishing because they help to improve monitoring, control, surveillance and enforcement of fishing operations. They: • Allow flag States to accurately manage vessels under their authority. • Give national authorities information to help them police their waters more effectively. • Bring clarity and consistency to Regional Fisheries Management Organization (RFMO) records, helping governments determine whether vessels are authorized to fish in their waters.
    [Show full text]
  • Thames Byelaws 2012 PORT of LONDON
    Port of London Thames Byelaws 2012 PORT OF LONDON THAMES BYELAWS 2012 1 2 CONTENTS Page BYELAW PART 1 - GENERAL 6 1 Citation and Commencement 6 2 Application of the Byelaws 6 3 Interpretation 6 4 Revocation of Byelaws 12 5 Offences 12 6 Defences to Proceedings 12 7 Application of Byelaws in certain circumstances 13 PART 2 - GENERAL DUTIES OF MASTERS OF VESSELS 14 8 Reporting Accidents and Incidents 14 9 Boat Races, Regattas, Processions and other River Events 15 PART 3 - GENERAL NAVIGATION AND SAFETY 17 10 Small, Fast Vessels 17 11 Navigation by Persons under the Age of 16 17 12 Thames AIS Carriage Requirements 18 13 Water-Skiing and other Similar Activities 19 14 Use of Personal Water Craft 19 15 Restrictions on Mooring 20 16 Speed Limits 20 17 Vessels Berthed or Moored 22 18 Anchors 23 19 Freeboard on Barges 23 20 Permission to Dive 24 21 Bathing and Swimming 24 22 Local Knowledge Requirements 25 3 PART 4 - STEERING AND SAILING BYELAWS 26 23 Obligation of the Master 26 24 Modifications to the International Collision Regulations 26 25 Vessels Navigating against the Tide and Turning About 26 26 Vessels Restricted in their ability to Manoeuvre and Underwater Operations 27 27 Vessels Navigating above Cherry Garden Pier and above Westminster Bridge 27 PART 5 - LIGHTS AND SHAPES 28 28 Obligations of the Master 28 29 Modification of the International Collision Regulations 28 30 Additions to the International Collision Regulations 28 31 Hydrofoils and Vessels Exceeding a Speed of 12 knots 29 32 Lights on Vessels Moored or Berthed 29 33 Diving
    [Show full text]
  • Basic Ship Theory to Marine Science Student
    Tujuan Tatap Muka Matakuliah Rancang Bangun Kapal Perikanan 1. Mahasiswa Memahami Beberapa Definisi Dasar Geometry Perkapalan Dalam Rancang Bangun Kapal Perikanan. 2. Mahasiswa Memahami Beberapa Definisi Dasar Hydrostatic Curve dan Bonjean Curve 3. Mahasiswa Memahami Teori Stabilitas Kapal Perikanan 4. Mahasiswa Memahami tentang Sheel Expantion. What is your mind about this movie1 , movie2Abeille Flandre.flv, movie3 and movie4 BasicBasic ShipShip TheoryTheory DefinitionsDefinitions DISPLACEMENT Archimedes principle: Every floating body displaces its own weight of the liquid in which it floats For a vessel to float freely in water, the weight of the vessel must be equal to the weight of the volume of water it displaces Displacement is the volume of water the vessel displaces DRAUGHT Draught relates to the depth of water required for a vessel to float freely and is measured vertically from the underneath side of the keel to the waterline FREEBOARD Freeboard is the vertical distance from the top of the lowest point of the working deck at the side of the vessel to the waterline LIGHT SHIP WEIGHT The light ship weight is the actual weight of a vessel when complete and ready for service but empty DEADWEIGHT Deadweight is the actual amount of weight in tonnes that a vessel can carry when loaded to the maximum permissible draught (includes fuel, fresh water, gear supplies, catch and crew) DISPLACEMENT MASS Displacement mass is the total weight of the vessel, i.e.: Lightship weight + deadweight = displacement mass LIST A vessel is said to be listed when it is inclined by forces within the vessel, e.g. movement of weight within the vessel A list reduces the stability of the vessel When a list is corrected by increasing the displacement mass, the additional weight should be placed as low as possible in the vessel HEEL A vessel is said to be heeled when it is inclined by an external force, e.g.
    [Show full text]
  • Millennium Class Tanker Structural Design – from Owner Experience to Shipyard Launching Ways
    Millennium Class Tanker Structural Design – From Owner Experience to Shipyard Launching Ways James Read1, Arne Stenseng2, Rod Hulla3 and Darold Poulin4 ABSTRACT Three 125,000 DWT double hull tankers are currently under construction for ARCO Marine, Inc. at Litton Avondale Industries in New Orleans, LA. These Millennium Class tankers are being built to transport crude oil from Valdez, AK to Cherry Point, WA. The design satisfies the requirements of OPA 90 and incorporates a unique structural design philosophy intended to enhance the structural performance of the vessel. This paper will illustrate how the Owner’s experience with previous vessels in Gulf of Alaska trade is reflected in the structural design of the new ships. The human elements of safety, inspection and maintenance are discussed and the influence of these factors on the structural arrangement is highlighted. In concert with these human factors are structural design improvements that have been implemented to specifically address fatigue and stress cracking with the intent of reducing repair requirements. These topics are presented in a discussion that follows the structural design from concept, through design and analysis and into the construction of the vessels. Lessons learned throughout the process are presented. 1 ARCO Marine, Inc., Long Beach, California 2 MCA Engineers, Inc., Costa Mesa, California 3 John J. McMullen and Associates, New York, New York 4 Litton-Avondale Industries, Avondale, Louisiana 1 FOREWORD vessels was quickly dismissed. Cargo capacity lost in retrofitting an inner hull to an exiting 120,000 DWT The goal of this paper is to broadly illustrate the vessel was impractical. It was also understood that the process by which the structure for the Millennium Class outer hull, while in good structural condition, would tankers was conceived, designed and constructed.
    [Show full text]
  • Thames Freight Standard)
    PORT OF LONDON AUTHORITY TECHNICAL STANDARDS FOR COMMERCIAL VESSELS ON THE TIDAL THAMES (THAMES FREIGHT STANDARD) 1st Edition ISBN Number: 978-0-900598-14-2 © Port of London Authority 2013 CONTENTS 1. FOREWORD ..................................................................................................... 1 2. DEFINITIONS .................................................................................................... 3 3. APPLICATION AND INTERPRETATION .......................................................... 8 3.1. Application ................................................................................................. 8 3.2. Areas of Operation ..................................................................................... 8 3.3. Licenses .................................................................................................... 8 3.4. Interpretation .............................................................................................. 8 3.5. The Right of Appeal ................................................................................... 8 3.6. Updating the Thames Freight Standard ..................................................... 9 3.7. Alternative Safety Standards ...................................................................... 9 3.8. Equivalent Standards ................................................................................. 9 3.9. Carriage of Additional Equipment ............................................................. 10 4. CONSTRUCTION AND STRUCTURAL STRENGTH.....................................
    [Show full text]
  • The Design and Service Experience of the Polar Endeavour Class Tankers
    The Design and Service Experience of the Polar Endeavour Class Tankers Robert A. Levine1, (M) SNAME, (M) IMarEST, C.Eng., Manager Engineering Integration & Naval Architecture, ConocoPhillips Marine ABSTRACT The Polar Endeavour (Millennium) Class Tankers, represent the first U. S. flag crude oil carriers designed and built for the Alaskan Trade in compliance with the Oil Pollution Act of 1990 (OPA90). These vessels represent the start of a revolution in design for American crude carriers. Not only are they fitted with double hulls, which are deeper than required, but also they are fitted with twin independent engine rooms, and twin rudders. They are the first vessels to be classed R2- S+ and NIBS under the American Bureau of Shipping’s (ABS) Guidelines for Redundant Propulsion Systems and Navigation Integrated Bridge Systems. The vessels meet the requirements for Annex VI of MARPOL for air emissions, and are painted with tin free (TBT) anti-foul paints. This paper describes the design development process used and the unique and innovated design, which resulted. Three vessels have entered service in 2001, 2002 and 2003 and two are under construction for delivery in 2004 and 2005. 1 The opinions expressed in this paper are those of the author and do not reflect those of Polar Tankers Inc., ConocoPhillips Marine, ConocoPhillips Alaska or the ConocoPhillips Corporation. 1 ACRONYMS +A1E Compliance with ABS Rules for Self- KW Kilowatts Propelled Vessels & Equipment LAN Local Area Network (Computer) Standards LBP Length Between Perpendiculars
    [Show full text]
  • Length, So That an Estimate May Be Used for Their Tonnage ;
    29. 12. 94 Official Journal of the European Communities No L 339/ 11 COUNCIL REGULATION (EC) No 3259/94 of 22 December 1994 amending Regulation (EEC) No 2930/86 defining the characteristics of fishing vessels THE COUNCIL OF THE EUROPEAN UNION, the methodology laid down in Annex I to the said Convention is in certain cases inappropriate ; Having regard to the Treaty establishing the European Community, and in particular Article 43 thereof, Whereas there should be flexible provisions for existing vessels, and in particular for those less than 15 metres in Having regard to the proposal from the Commission, length, so that an estimate may be used for their tonnage ; Having regard to the opinion of the European Parlia­ Whereas for vessels less than 15 metres in length a ment ('), simpler definition of gross tonnage is desirable ; Having regard to the opinion of the Economic and Social Whereas vessels equal to, or greater than, 15 metres in Committee (2), length should be measured in accordance with the said Convention in view of the greater importance of the Whereas reference is made to the characteristics of fishing superstructure volume of those vessels ; vessels in the common fisheries policy, requiring uniform definitions of vessel characteristics ; whereas Council Whereas a postponement of the deadline of 18 July 1994 Regulation (EEC) No 2930/86 of 22 September 1986 for remeasuring existing vessels equal to, or greater than, defining the characteristics of fishing vessels (3) was 15 metres and less than 24 metres in length is necessary
    [Show full text]