TES5 Serial Digital Multistandard TV Data Encoder Platform
Total Page:16
File Type:pdf, Size:1020Kb
TES5 Serial Digital Multistandard TV Data Encoder Platform Overview Key Features The Ross Video TES5 Serial Digital Multistandard TV Data Encoder / Inserter is a The TES5 combines the four highly flexible platform for encoding, inserting, receiving, bridging and multiplexing components necessary for TV data digital data in the vertical blanking interval (VBI) of any component serial digital TV transmission into one unit: signal. The TES5 has four input data ports that are enabled by software modules to accept RS-232 data; three ports are direct and one is via an internal 33.6Kbps • Communications: Four data modem or LAN adaptor. The TES5 can house up to four encoder software ports and VBI serial digital and modules for encoding and inserting up to four input data streams into a single VBI. analog data decoders can be The TES5 can operate in any television and AC power standard, and can encode used for data input and output. and insert data in any TV data format into either 525 or 625 line component serial digital video signals. • Processing: The heart of the TES5 is an Intel Prosessor The TES5 can be used as an encoder/inserter for encoding and inserting with FLASH disk. Data formatting asynchronous serial RS-232 data streams into the VBI, or as a data bridge for is handled by the unit and Ross extracting the data from the VBI of one video source and inserting it into the VBI Video encoder software modules of another. Standard encoder software modules are available for broadcasting or are stored in non-volatile bridging data meeting North American (NABTS), European (WST) or Japanese memory. (JTES) standards for teletext data transmission. Standard encoder modules are also available for EIA608 Closed Captioning and for configuring the TES5 as a • Encoding: Any TV data format Test Encoder. See the appropriate module data sheet for details on any specific (NABTS, WST, AMOL, Line 21 module. Ross Video can also supply non-standard encoder software modules Captioning, proprietary) can be under special order. encoded, with up to eight done simultaneously. • Insertion: The TES5 will insert the encoded data formats into any combination of video lines in any 270 Mbit per second, 525 or 625 line, component serial digital video signal. Proven TV Data Broadcast Encoder Technology System Component Software Modules Ross Video is the world’s leading supplier The TES5 is primarily used as the key • High Speed Data Broadcast: The of TV data broadcast products, systems component of a TV data broadcast TES5 highspeed data broadcast and software for transmitting data over system. Typical TV data broadcast system software modules are fully compliant any standard TV signal. Ross Video’s applications include high-speed data with the established standards for TV products and technology have been transmission, file transfer, Internet content data transmission. Standard modules adopted worldwide for use by major TV distribution, news and stock quote include NABTS, WST, and Japanese broadcasters, cable TV system operators, delivery, electronic publishing and weather Teletext (JTES). Features include data news agencies, systems integrators, value radar or photo image transmission. rates up to 115.2Kbps per serial port added service providers and OEM (higher via the LAN), flexible data equipment suppliers. Ross Video supplies To construct a TV data broadcast system, formats, broad addressing capability, a complete line of TV data encoders, you will need a TES5 TV Data Encoder and advanced built-in forward error data bridges, receivers and systemlevel Platform equipped with one to four correction (FEC) techniques developed applications software packages encoder software modules (one for each specifically for TV data broadcast to meet specific user requirements. input data stream) plus an appropriate applications. For current information on Ross Video’s number of TV data receivers (one per technology or products visit our website end-user receive site). This is all that is • Closed Captioning: The TES5 will at www.rossvideo.com. needed for simple data transmission. perform Line 21 Closed Captioning The headend TES5 and remote TV (PAL Line 22), including text services. data receivers act as a simple With the serial digital decoder, it can point-to-multipoint modem link; whatever add data to an existing captioning goes in at the encoder at the headend stream. comes out of the receivers at each end-user site. • Data Bridge: The Data Bridge Module and analog decoder enable the TES5 For TV data reception Ross Video supplies to take TV data from the VBI of one both internal PC-card and external video source and insert it into the PC-peripheral TV data receivers. VBI of another video signal. For end-to-end system solutions other • Test Encoder: The Test Encoder than simple data transfer, you will also Module allows the TES5 to be used as need the appropriate system-level a reference encoder / inserter in an application software (either Ross Video’s assembly-line, test-facility and/or or your own). Ross Video offers several development application. A single TES5 system level applications software Test Encoder can simultaneously source packages for use with its TV data several different signal formats in any broadcast equipment. video format. TV Data Broadcast System TES5 Encoder Architecture TES5 Encoder Operation Communications Insertion Encoding • Data Ports: The TES5 has four input • World-standard: The TES5 is fully • Multi-rate Data Encoding: Up to eight data ports; three direct RS-232 serial compatible with the 4:2:2 component TV data formats can be encoded and ports and a 33.6Kbps modem or serial digital standard for 525-line and inserted simultaneously. Encoding 10 Base-T port to allow data to be 625-line systems and all AC power formats are all software controlled and accepted from several sources for standards. are enabled with Ross Video encoder encoding. Alternatively, they can software modules. Formats supported serve as outputs for data received • Individually Selectable Lines: Any include NABTS (EIA516), WST P31, Line 21 Closed Captioning (EIA608), through the optional VBI decoders. lines in the VBI or active video can be Japanese Teletext (JTES) and AMOL. A general-purpose bidirectional 8-bit individually selected for insertion. Software modules for nonstandard / parallel port can be used with special proprietary formats are available. software for controlling external • Error Correction & Handling: The Data is received either through one equipment or sensing external signals. EDH bits as per SMPTE RP-165 are of three direct RS-232 serial ports, checked and inserted by the TES5. the modem / LAN port or via the video • Data Reception: A multistandard digital input. The encoder is compatible with decoder connected to the Program • Video Bypass: Automatic video bypass existing NABTS and Captioning Video input and analog decoder goes into effect on power failure or on software packages on the market. connected to the Auxiliary video input detection of certain faults. Data allow reception of any TV data in insertion can be manually disabled by the VBI including Captioning and using the front-panel switch or remote Processing NABTS data. This data can be bridged control connector. to the Program Video output, • CPU Processor: An Intel processor re-directed to a data port or re-inserted • Remote Operation: Once the TES5 is provides the TES5 processing power. in another data format. installed, data transmission and system The ISA bus is available internally on control can be located and operated a standard PC-type edge connector as • Dynamic Configuration: The TES5 is remotely; broadcasters who act as VBI well as on a PC104 header, allowing for set up using a PC connected directly carriers do not need to run the system future addition of other interfaces. to a serial data port, or remotely via the for their customers. internal modem. Parameters are stored • RAM & FLASH Memory: Standard in the unit’s non-volatile memory. RAM is 4Mb upgradeable to 16Mb and the FLASH acts as a disk. The TES5 software can be changed or upgraded by downloading software through one of the data ports or remotely via the modem port. The TES5 can be dynamically reconfigured in the field by Ross Video. TES5 Front and Rear Panels Specifications.