Quare Post, (Round Systems Corner Four • • Exterior Insulation Finish System (EIFS) System Finish Insulation Exterior •

Total Page:16

File Type:pdf, Size:1020Kb

Quare Post, (Round Systems Corner Four • • Exterior Insulation Finish System (EIFS) System Finish Insulation Exterior • fax: (715) 378-2697 (715) fax: telephone: (715) 378-2640 (715) telephone: e-mail: [email protected] e-mail: web: www.hlhalflog.com web: Solon Springs, WI 54873 WI Springs, Solon .O. Box 222 Box .O. P 11290 South Mertzig Parkway Mertzig South 11290 Flange provides invisible Diameter Log Cabin 10” 12” 14” 16” fastening Siding Oriented Strand Board Stack 1 Height 6 /2” 8” 10” 12” 14” Expanded polystyrene Natural veneer laminated to smooth hardboard 1 1 1 1 Thickness 1 /2” 3” 3 /2” 4 /2” 5 /2” Half logs lock into one another • SuncoatTM High Polymer Acrylic Stain (four standard colors: Amber Ice, Sandy Creek, Autumn Straw, Auburn Ridge) • Pre-finished 2”x8” log cabin siding • Caulk, screws, chinking and trim • H&L Half-Logs, available in 4 diameter sizes, • Large diameter solid log detailing: trusses, posts, headers, purlins 94” lengths (see diagram) and rafters • Ceiling beams in four sizes: 10, 12, 16 and • Interior H&L Half-Logs 20 inch, 94” lengths • Custom veneer options • Four corner systems (round post, square • Exterior insulation finish system (EIFS) timber, saddle notch, and butt and pass) • Custom pre-finishing services (for wood siding products) • Three veneer choices (smooth knotty pine, • Custom H&L Half-Logs to 20” diameter peeled knotty pine and embossed hardboard) • Chinked style H&L Half-Logs Wisconsin Dells Lodge H&L Half-Log ... for high-value H&L Half-LogTM structures. The large diameter creates • Light Weight dramatic curb appeal – 80% lighter than solid log profiles 12” Smooth Pine with Saddle Notch corners - Sandy Creek of the same size The patented H&L and higher resale – structural design cost savings: Half-Log is an values. Our system standard footings and walls innovative laminated results in savings on • Expanded Polystyrene (EPS) Core engineered wood construction costs, – four times greater R-values than solid log siding product that is easy lower manpower 16” Peeled Pine with Saddle Notch corners over ICF construction - Sandy Creek – additional insulation for lower to install. requirements, less energy costs, warmer in winter, cooler in summer heavy lifting, lower – effective noise reduction, resulting Combining injury rate, faster in quiet rooms. sheathing, siding installation, and the • Thick, Natural Wood Veneers pre-finishing and ability to transport – traditional log look using 80% less timber insulation into a products to remote – greater consistency for faster H&L Industries, Inc. is the manufacturer and leading provider of single application building sites. installation and less waste – hidden fastening system for large-diameter, log building systems that conserve valuable timber and energy step, the H&L 12” Peeled Pine with Saddle Notch corners - Auburn Ridge authentic look, enabling siding to resources. Company headquarters are located on 12 acres in the northern Wisconsin Half-Log system H&L be re-used community of Solon Springs. The 17,000 square-foot complex includes a state-of-the- saves on material Half-LogTM •Factory Pre-Finishing art pre-finishing facility. and labor costs. – stunning high quality and for new consistent finish, includes one Since 1991, H&L Half-Log siding has been installed on a wide range of commercial commercial base coat and three top coat and residential projects, including resorts, lodges, motels, restaurants, retail shops, H&L applications office buildings, condominiums, construction or Half-LogTM – one field coat application after homes and cabins. Before remodeling. installation, followed by an easy long-term maintenance schedule After for new – option for factory-applied final residential field coat construction or 12” Cedar Embossed remodeling. Hardboard with Round corner posts - Solid Olympic stain 12” Peeled Pine with Saddle Notch corners - Auburn Ridge.
Recommended publications
  • A Guide to Maintaining the Historic Character of Your Forest Service Recreation Residence
    United States Forest Department of Service Agriculture Technology & Development Program A Guide to Maintaining 2300–Recreation April 2014 the Historic Character 1423–2815P–MTDC of Your Forest Service Recreation Residence Cover: This photo in September 1923 shows a newly built recreation residence in the foothills of the Cascade Mountains at the Silver Creek tract of the Rainier National Forest, which is now part of the Mt. Baker- Snoqualmie National Forest in the Pacific Northwest Region. A Guide to Maintaining the Historic Character of Your Forest Service Recreation Residence Kathleen Snodgrass Project Leader USDA Forest Service Technology and Development Center Missoula, MT April 2014 USDA Non-Discrimination Policy The U.S. Department of Agriculture (USDA) prohibits discrimination against its customers, Adjudication, 1400 Independence Avenue, S.W., Washington, D.C. 20250-9410, by fax (202) employees, and applicants for employment on the bases of race, color, national origin, age, 690-7442 or email at [email protected]. disability, sex, gender identity, religion, reprisal, and where applicable, political beliefs, marital status, familial or parental status, sexual orientation, or all or part of an individual’s income is Persons with Disabilities derived from any public assistance program, or protected genetic information in employment Individuals who are deaf, hard of hearing or have speech disabilities and you wish to file either or in any program or activity conducted or funded by the Department. (Not all prohibited bases an EEO or program complaint please contact USDA through the Federal Relay Service at (800) will apply to all programs and/or employment activities.) 877-8339 or (800) 845-6136 (in Spanish).
    [Show full text]
  • Folk Log Structures in Pennsylvania
    Folk Log Structures in Pennsylvania By Thomas M. Brandon Research Assistants: Jonathan P. Brandon and Mario Perona FOLK ARCHITECTURE The term ‘folk architecture’ is often used to draw a distinction between popular or landmark architecture and is nearly synonymous with the terms ‘vernacular architecture’ and ‘traditional architecture.’ Therefore, folk architecture includes those dwellings, places of worship, barns, and other structures that are designed and built without the assistance of formally schooled and professionally trained architects. Folk architecture differs from popular architecture in several ways. For example, folk architecture tends to be utilitarian and conservative, reflecting the specific needs, economics, customs, and beliefs of a particular community. (Source: Oklahoma History Society’s Encyclopedia of Oklahoma History and Culture, Website. http://digital.library.okstate.edu/encyclopedia/entries/F/FO002.html, Alyson L. Greiner, February, 17, 2011). Note. Much of the data and pictures found in this field guide came from a study on log structures in 18 counties of western and central Pennsylvania. The Historic Value of Folk Log Structures The study of folk log construction, also known as horizontal log construction, is exciting because, unlike most artifacts from the pioneer era, log structures have not been moved from where the pioneers used them. The log structure remains intact within the landscape the pioneer who built it intended. Besides the structure itself, which provides valuable information about the specific people who occupied it, the surrounding historic landscape tells it own story of how the family lived, from location of water sources and family dump to the layout of fields, location with other houses in the neighborhood and artifacts found in the ground still in context with their original use.
    [Show full text]
  • Printable Intro (PDF)
    round wood timber framing make an A shape. They can still be found in old barns and cottages. But they had to find very long pieces of wood, so people started making small squares and building them up to the right shape, then joining the squares diagonally to make a roof. By now, everyone was squaring their timber, because a) it's more uniform, and removes uncertaintly; b) all joints can be almost identical – you don't have to take into consideration the shape of the tree; unskilled people can then be employed to make standard joints; and c) right- angles fit better, joints become stronger, and you can fit bricks / wattle & daub in more easily. Everything is flat and flush. what are the benefits? So round wood could be considered old- fashioned, but the reasons for resurrecting it are aesthetic and ecological. It looks pretty; it's a Hammering a peg into a round wood joint with a natural antidote to the square, flat, generic world home-made wooden mallet. that we build; it reconnects people with the forms of the natural world that are more relaxing to the eye; and it reminds us that wood comes from what is it? trees. Also, you can use coppiced wood and Round wood is straight from the tree (with or smaller dimension timber. If you use squared without bark), without any processing, squaring or wood, you need to cut down mature trees and re- planking. Timber framing is creating the structural plant, but a coppiced tree continually re-grows. framework for a building from wood.
    [Show full text]
  • Log Cabin Studies: the Rocky Mountain Cabin, Log Cabin Technology and Typology, Log Cabin Bibliography
    Utah State University DigitalCommons@USU U.S. Government Documents (Utah Regional Forestry Depository) 1984 Log Cabin Studies: The Rocky Mountain Cabin, Log Cabin Technology and Typology, Log Cabin Bibliography United States Department of Agriculture, Forest Service Follow this and additional works at: https://digitalcommons.usu.edu/govdocs_forest Part of the Architectural Engineering Commons Recommended Citation United States Department of Agriculture, Forest Service, "Log Cabin Studies: The Rocky Mountain Cabin, Log Cabin Technology and Typology, Log Cabin Bibliography" (1984). Forestry. Paper 4. https://digitalcommons.usu.edu/govdocs_forest/4 This Report is brought to you for free and open access by the U.S. Government Documents (Utah Regional Depository) at DigitalCommons@USU. It has been accepted for inclusion in Forestry by an authorized administrator of DigitalCommons@USU. For more information, please contact [email protected]. 'EB \ L \ga~ United Siaies Department of Agriculture Foresl Serv ic e Intermountain Region • The Rocky Mountain Cabin Ogden, Utah Cull ural Resource • log Cabin Technology and Typology Re~ o rl No 9 LOG CABIN STUDIES By • log Cabin Bibliography Mary Wilson - The Rocky Mountain Cabi n - Log Ca bin Technology and Typology - Log Cabi n Bi b 1i ography CULTURAL RESOURCE REPORT NO. 9 USDA Forest Service Intennountain Region Ogden. Ut ' 19B4 .rr- THE ROCKY IOU NT AIN CA BIN By ' Ia ry l,i 1s on eDITORS NOTES The author is a cultural resource specialist for the Boise National Forest, Idaho . An earlier version of her Rocky Mountain Cabin study was submitted to the university of Idaho as an M.A. thesis . Cover photo : Homestead claim of Dr.
    [Show full text]
  • A Big Success
    VALUE ADDED The Little Things Make This Company a Big Success by Bill Tice or Rob Wrightman, president and CEO of True North Log Homes Inc. in Bracebridge, Ont., making the decision to go into the highly competitive log home business was easy. Developing a product that would set him apart from the competition was supposed to have been the hard part. But for Wrightman, achieving that com- petitive edge simply meant going back to basics and solving a long-term problem for the log home industry – gaps that are created when the structure settles and allows air into the home. age log building you will have about 40 rods,” he explains. Wrightman, who has a self-proclaimed interest in tech- “In the past, it would take two days to install all of the rods nology, has four U.S. and Canadian patents in the works with two guys. Now, with the spring action, it takes half a right now, including one for his new “Log Lock Thru-bolt” day or less with one man.” assembly system, which is a spring loaded, self-adjusting Following more than two years of development, Wright- method of joining the logs together. “Two feet from every man started installing the new “Log Lock” system in his corner and between each door and window opening we fac- company’s log homes earlier this year, but there is more to tory drill a hole for a one–piece through bolt to be inserted his log homes than just steel rods, springs and bolts. “It’s also at the time of assembly,” explains Wrightman when provid- the quality of the materials we use, the workmanship, and ing a simplistic description of the technology.
    [Show full text]
  • Alaska Log Building Construction Guide
    AlaskaAlaska LogLog BuildingBuilding ConstructionConstruction GuideGuide BuildingBuilding Energy-Efficient,Energy-Efficient, QualityQuality LogLog StructuresStructures inin AlaskaAlaska by Michael Musick illustrated by Russell C. Mitchell for Alaska Housing Finance Corporation Alaska Log Building Construction Guide by Mike Musick additional text by Phil Loudon edited by Sue Mitchell graphics by Russell Mitchell photos by Mike Musick or as noted for Alaska Housing Finance Corporation When we build, let us think that we build forever. Let it not be for present “delight nor for present use alone. Let it be such work as our descendants will thank us for; and let us think, as we lay stone upon stone, that a time is to come when those stones will be held sacred because our hands have touched them, and that people will say, as they look upon the labor and wrought substance of them, “See! This our parents did for us.” —John Ruskin ” ii Acknowledgements he authors would like to thank the many people who made this book Tpossible. Please know that your contribution is appreciated, even if we forgot to mention you here. Phil Loudon contributed a lot of time and text to the retrofit chapter. Sandy Jamieson, noted artist and master log builder, provided thoughtful comments and review. Phil Kaluza, energy specialist for Alaska Housing Finance Corporation (AHFC), contributed the sample energy ratings in Appendix C and other information on AkWarm. And particularly, this book would not have been possible without Bob Brean, director of the Research and Rural Development Division; Lucy Carlo, research and rural development specialist; and Mimi Burbage, energy specialist for AHFC.
    [Show full text]
  • Protecting Log Cabins from Decay
    PROTECTING LOG CABINS FROM DECAY USDA Forest Service Forest Products Laboratory General Technical Report FPL-11 1977 U. S. Department of Agriculture Forest Service Forest Products Laboratory Madison, Wis. ABSTRACT This report answers the questions most often asked of the Forest Service on the pro- tection of log cabins from decay, and on prac- tices for the exterior finishing and mainte- nance of existing cabins. Causes of stain and decay are discussed, as are some basic techniques for building a cabin that will minimize decay. Selection and handling of logs, their preservative treatment, construction details, descriptions of preserv- ative types, and a complementary bibliography are also included. CONTENTS INTRODUCTION.. ................... 1 CAUSES AND CONTROL OF DECAY . 1 Fungal and Insect Damage ........ 1 Preservative Treatments .......... 2 Selection of Preservatives ..... 2 Methods of Application ....... 2 Treatment of Cut Surfaces .... 2 BUILDING TO PREVENT DECAY ..... 3 Selection and Handling of Logs ... 3 Type of Wood ................ 3 Log Preparation .............. 3 Preservative Treating of Logs . 3 Construction Details .............. 4 Foundation ................... 4 Walls ........................ 5 Roof ......................... 5 FINISHING DETAILS ................. 6 Interior .......................... 6 Exterior.. ........................ 6 RESTORING AND MAINTAINING EXISTING CABINS ............... 7 BIBLIOGRAPHY: OTHER HELPFUL PUBLICATIONS .................. 7 APPENDIX: PRESERVATIVE SOLUTIONS.. ................... 8
    [Show full text]
  • Material for Educators
    Material for Educators Lincoln Log Cabin State historic Site 402 South Lincoln Highway Road Lerna, IL 62440 217-345-1845 [email protected] www.lincolnlogcabin.org 2 Table of Contents Introduction To the educators……………………………………………………..…………...……3 Pre-visit Lessons Glossary of Terms and Vocabulary Exercise……………………………………...….6 Lesson 1: Politics and Westward Expansion in the 1840s………………………..…..9 Lesson 2: Settlers’ Homes and Materials Needed for Building……………………..17 Lesson 3: The Lifestyles of the Lincolns and Sargents……………………………...22 Lesson 4: The Life of a Child in the 1840s………………………………………….28 On-Site Activities Visitor’s Center Scavenger Hunt…………………………………………………….34 Visitor’s Center Scavenger Hunt Answers…………………………………………..35 Lincoln Farm Scavenger Hunt……………………………………………………….36 Lincoln Farm Scavenger Hunt Answers……………………………………………..37 Sargent Farm Scavenger Hunt……………………………………………………….39 Sargent Farm Scavenger Hunt Answers……………………………………….…….40 Post-visit Activities “How Big Was That?”……………………………………………………………….43 Crossword Puzzle………………………………………………………………...….44 Crossword Puzzle Answers………………………………………………………….45 Resource guide……………………………………………………………………...46 3 Introduction To the Educators: Lincoln Log Cabin’s educational material was produced by the staff of the Lincoln Log Cabin State Historic Site for the purpose of providing supporting materials which will enhance the students knowledge prior to and after visiting Lincoln Log Cabin. The packet contains two main divisions: Pre-visit and Post-visit activities. Within these divisions, there
    [Show full text]
  • Etag 012 Log Building Kits
    European Organisation for Technical Approvals Europäische Organisation für Technische Zulassungen Organisation Européenne pour l'Agrément Technique TB ETAG 012 Edition June 2002 GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL OF LOG BUILDING KITS EOTA KUNSTLAAN 40 AVENUE DES ARTS, 1040 BRUSSELS TABLE OF CONTENTS Page SECTION ONE: INTRODUCTION 1 PRELIMINARIES 6 1.1 Legal basis 6 1.2 Status of ETAG 6 2SCOPE 7 2.1 SCOPE 7 2.2 Use categories/Product families/Kits and Systems 7 2.3 Assumptions 7 3 TERMINOLOGY 9 3.1 Common terminology and abbreviations 9 3.2 Terminology specific to this ETAG 9 SECTION TWO : GUIDANCE FOR THE ASSESSMENT OF THE FITNESS FOR USE 11 4 REQUIREMENTS 13 4.1 Mechanical resistance and stability (ER 1) 14 4.2 Safety in case of fire (ER 2) 15 4.3 Hygiene, health and environment (ER 3) 15 4.4 Safety in use (ER 4) 16 4.5 Protection against noise (ER 5) 16 4.6 Energy economy and heat retention (ER 6) 17 4.7 Aspects of durability, serviceability and identification 17 5 METHODS OF VERIFICATION 18 5.1 Mechanical resistance and stability 19 5.2 Safety in case of fire 19 5.3 Hygiene, health and environment 20 5.4 Safety in use 22 5.5 Protection against noise 22 5.6 Energy economy and heat retention 22 5.7 Aspects of durability, serviceability and identification 23 6 ASSESSING AND JUDGING THE FITNESS FOR USE 26 6.1 Mechanical resistance and stability 27 6.2 Safety in case of fire 29 6.3 Hygiene, health and environment 29 6.4 Safety in use 30 6.5 Protection against noise 30 6.6 Energy economy and heat retention 30 6.7 Aspects of durability, serviceability and identification 31 7 ASSUMPTIONS AND RECOMMENDATIONS UNDER WHICH THE FITNESS FOR USE OF THE PRODUCTS IS ASSESSED 33 7.1 Design of works 33 7.2 Packaging, transport and storage 33 7.3 Execution of works 33 ETAG 012 Page 2 7.4 Maintenance 34 SECTION THREE : ATTESTATION AND EVALUATION OF CONFORMITY 35 8 ATTESTATION AND EVALUATION OF CONFORMITY 35 8.1 EC decision 35 8.2 Responsibilities 35 8.3 Documentation 37 8.4 CE marking and information 37 SECTION FOUR :ETA CONTENT 39 9 THE ETA CONTENT 39 9.1 The ETA-content.
    [Show full text]
  • Mushroom Inoculation Instructions
    Totem Method: Smaller sections of logs are stacked upright Mushroom Inoculation with sawdust spawn sandwiched between the sections of log. Instructions Large-diameter wood becomes easy to use and attractive to display. The preferred method for Oyster Mushrooms and Most of our mushroom varieties grow on hardwood logs. Lion’s Mane. No special tools are needed. Although almost any hardwood will produce some mushrooms, productivity is influenced by the type of wood 1. Cut three sections of log for each totem: one piece only 1-3" used. The harder hardwoods such as Oak and Maple are long, and two sections 12-18" long. preferred though some softer hardwoods such as Poplar work, 2. Bring your setup to your planned incubation place and particularly with Oyster mushrooms. create totems on site. The best time to cut logs is in early spring before trees have 3. Open a contractor-size black plastic bag, sprinkle a layer of budded out. Only living, disease-free wood should be cut for sawdust spawn about 1" deep in the bottom of the bag, and mushroom logs. stand one of the 12-18" logs upright on top of the spawn. Make another layer of sawdust spawn on top of it, and place the The best time to inoculate logs is in spring, within one to two second 12-18" log on top of that. Create a third layer of weeks after the logs have been cut. This allows the cells in the sawdust spawn on top of the second log and then cap the tree to die but is not long enough for the log to dry out or for totem with the 1-3" piece.
    [Show full text]
  • Dovetails and Broadaxes: Hands-On Log Cabin Preservation
    Dovetails and Broadaxes: Hands-On Log Cabin Preservation Appendix E—Log Building Origins and Styles Plan and Form As they moved westward, European-American settlers suc- cessfully adapted log construction techniques to regional materials, climates, and terrains (figures E1 and E2). The floor plan and shape of log buildings constructed in the 1700s and early 1800s sometimes can provide clues to the eth- nic origin or route of migration of the original inhabitant or builder. Because the settlers often borrowed and copied tech- niques used successfully by their neighbors, don’t infer too much about the ethnic origins of a cabin’s builders from the way they constructed the cabin. Figure E2—The builder of this cabin at the mouth of Big Timber Creek Canyon on the Big Timber Ranger District in Montana (Gallatin National Forest, Northern Region) used a stone foundation with massive, battered stone corners and porch piers, and moderate diameter, round, softwood log walls. The cabin has a steep cedar shingled roof and a rock chimney for a wood stove near the center of the building. The entry is on the gable end under a gabled porch. It was sold and removed from the site in the early 1980s. The basic unit of each of these types is the one-room enclo- sure formed by four log walls joined at their corners, called a single pen or crib (figure E3). People sometimes divided the single pen by interior partitions or enlarged them by add- ing another log pen. The typically mid-Atlantic “continental” Figure E1—The two-story Gladie pioneer cabin, built around 1900, was Appendix E—Log Building Origins and Styles restored as part of the Gladie Visitor Center pioneer homestead interpretive site in Kentucky (Daniel Boone National Forest, Southern Region).
    [Show full text]
  • Section 4 Assembling Your Stockade Log System
    Section 4 Assembling Your Stockade Log System 4.1 Install Base Course to Foundation (Details L-1-RR & RF) ..... 4-4 Base Course to Subfloor .................................................... 4-4 4.2 Window & Door Bucks (Details L-40 & L-41) ....................... 4-7 Installing Door Bucks ........................................................ 4-8 4.3 Install Wall Courses ................................................................. 4-9 Keep Walls and Corners Plumb ......................................... 4-9 Installing Window Bucks ................................................ 4-10 Stacking Identical Logs ................................................... 4-10 4.4 Second Floor Girder Installation ............................................ 4-11 4.5 Second Floor Beams .............................................................. 4-12 4.6 Temporary Second Floor Decking ......................................... 4-12 4.7 Log Gable Ends ...................................................................... 4-13 How to Install Log Gable Ends ....................................... 4-13 Cutting Log Gable Ends (Detail L-30) ............................ 4-13 Installing Log Siding over Non-Heated Areas 4.8 Installing Doors and Windows (Details L-40; L-41) ............. 4-14 Preparations ..................................................................... 4-14 Installing the Window or Door ........................................ 4-14 Exterior Doors ................................................................. 4-16 4.9 Electrical
    [Show full text]