DOCSLIB.ORG

1St Confair 2018 the Future of Forging

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
1St Confair 2018 the Future of Forging BERLIN • GERMANY 13–15 NOVEMBER 2018 1st conFAIR 2018 the future of forging Photo: © pisaphotography/Shutterstock.com Photo: www.EUROFORGE-conFAIR.com conFAIR 2018 the future of forging 24_10_Prog_quadrat_A5.indd 1 24.10.18 19:14 24_10_Prog_quadrat_A5.indd 2 25.10.18 01:55 TABLE OF CONTENTS Welcome addresses . 4 Committees . 6 Contacts . 6 About EUROFORGE . 7 Programme at a glance . 9 Programme Tuesday, 13 November 2018 . 10 Social event . 11 Programme Wednesday, 14 November 2018 . 12 Programme Thursday, 15 November 2018 . 15 About Berlin . 16 Highlights & Events . 17 Information from A to Z . 20 Acknowledgements . 22 Exhibition fl oor plan . 24 List of exhibitors . 25 Company profi les . 29 Imprint . 54 EUROFORGE conFAIR 2018 | 3 24_10_Prog_quadrat_A5.indd 3 24.10.18 19:14 WELCOME ADDRESS Dear Colleagues and Friends, On behalf of EUROFORGE I am absolutely delighted to welcome you at the 1st EUROFORGE conFAIR from 13th – 15th November 2018 in Berlin. Fair & Exhibition Our Fair and Exhibition provides a bundle of opportunities to meet the key suppliers of the in- ternational forging world, promoting their brand new products or services and presenting their latest technological developments. Conference EUROFORGE conFAIR 2018 is designed specifically for the members of the forging industry with the prospect of gaining new insights, exchanging your experiences and sharing your thoughts with others within the forging world. Meet the scientific and commercial forging community at plenary sessions and commercial workshops. We are glad you took up the opportunity of letting yourself being inspired by first class keynote speeches, high end scientific presentations and leading edge industrial shows. We really hope that you will have an interesting and beneficial time in Berlin and enjoy the st1 EUROFORGE conFAIR 2018. Alper Kanca EUROFORGE President 4 | EUROFORGE conFAIR 2018 24_10_Prog_quadrat_A5.indd 4 24.10.18 19:14 WELCOME ADDRESS Dear Members and Friends of the Forging Family, The future of forging – being the motto of our 1st EUROFORGE conFAIR – strongly depends on two factors: on the one hand we need a powerful and innovative supplier base to ensure reliable processes and state-of-the-art solutions along the whole supply chain. On the other hand, intense research & development efforts have to be taken by forging companies as well as the scientific community. The main aim is to defend and extend the advantages of the forging tech- nology against other competing technologies and provide answers to the future challenges of the industry and the global environment. The EUROFORGE conFAIR 2018 addresses both these factors. As an opportunity for all kinds of suppliers to present their latest products and solutions contributing to the effectiveness and efficiency of the forging companies in the extensive fair and exhibition. And with a conference that covers the latest technological developments by world-leading institutes and innovation leaders from the industry. I am very happy to welcome the members of the forging family at this event using the opportunity to meet and exchange on common challenges and on innovative technical solutions. Welcome to Berlin – welcome to the EUROFORGE conFAIR 2018! Tobias Hain EUROFORGE Secretary General EUROFORGE conFAIR 2018 | 5 24_10_Prog_quadrat_A5.indd 5 24.10.18 19:14 COMMITTEES CONTACTS Organisation committee Hosting confederation Alper Kanca, EUROFORGE President, Managing Director, EUROFORGE AISBL KANCA, Turkey Tobias Hain Tobias Hain, Secretary General, EUROFORGE, Germany Secretary General Bluepoint conference & business center Brussels Friederike Schnittker, Assistant, EUROFORGE, Germany Bd A. Reyers Ln 80 Sabrina Höfinghoff, Assistant, EUROFORGE, Germany BE-1030 Brussels Belgium Programme committee P: +49 2331 958812 Dr.-Ing. Dirk Landgrebe (Chairman), Metaldyne GmbH, Germany F: +49 2331 958712 Dr. Lukasz Madej (Vice-Chairman), Akademia Górniczo, Poland [email protected] Nikolay Biba, Ph.D, Micas Simulations Limited trading as QForm UK, Great Britain Legal organiser (PCO) MCI Deutschland GmbH Ken Campbell, Confederation of British Metalforming, Great Britain MCI | Germany – Berlin Dr. Lander Galdos, Mondragon University, Spain Markgrafenstr. 56 Prof. Dr. Mustafa Ilhan Gökler, Middle East Technical University, 10117 Berlin METU-BILTIR Research and Application Center, Turkey T: +49 30 204590 Gürbüz Güzey, Parsan, Turkey F: +49 30 2045950 Karel Krhut, INPO spol. s r.o., Czech Republik Project management Iñaki Pérez-Bilbao, Tecnalia, Spain Claudia Gemsemer Lukasz Petrus, Kuźnia Glinik Sp. z o.o., Poland [email protected] Matthias Praus, Seissenschmidt GmbH, Germany Registration and accommodation Manuel Román-Caldelas, CIE Automotive, Spain [email protected] Olivier Vasseur, Federation Forge Fonderie, France Industrial exhibition and sponsoring Theresia Richter [email protected] 6 | EUROFORGE conFAIR 2018 24_10_Prog_quadrat_A5.indd 6 26.10.18 15:07 ABOUT EUROFORGE EUROFORGE mission is to be the professional partner and EUROFORGE MEMBER ASSOCIATIONS net-work builder for the European Forging Associations/ AGORIA, Belgium companies when dealing with questions concerning com- Confederation of British Metalforming, Great Britain mon opportunities and threats of the forging business. DÖVSADER, Turkey EUROFORGE pays special attention to improving the com- Industrieverband Massivumformung e. V., Germany petitiveness and market position of the European forging L’Association Française de Forge, France industry. Sociedad de Industrias de Forja por Estampación, Spain • The overall objective is to enlarge the activities of the SWEDEFORGE, Sweden national EUROFORGE member associations SVAZ KOVÁREN ČR. o.s., Czech Republik • Forum of European forging companies for exchanging The Finnish Forging Group, Finland experiences and common trends Unione Nazionale Stampatori Acciaio, Italy • Representative body vis à vis political bodies and the Związek Kuźni Polskich, Poland general public to collect and defend the industries com- mon interests • Information · evaluation of technical, economic and environmental trends · statistics · benchmarking For further information please visit our homepage: www.euroforge.org EUROFORGE conFAIR 2018 | 7 24_10_Prog_quadrat_A5.indd 7 24.10.18 19:14 EuroForgeAd9-18.qxp_EruroForge 9/24/18 10:52 AM Page 1 DDOONN’’TT JJUUSSTT RREEPPAAIIRR DDIIEESS Increase Forge Die Life by 50-100% In General Increase Open Hammer Die Life by 700% Visit Us: Reduce the Cost of Die EUROFORGE Steel for Hammer or conFAIR 2018 Press Dies by 10-30% Stand #10 IINNCCRREEAASSEE DDIIEE LLIIFFEE &R&REEDDUUCCEE YYOOUURR CCOOSSTTSS Forge die repair is only half our story. At Weld Mold, our mission is to extend Tel: +1 810-229-9521 forge die life, while reducing customer costs. web: weldmold.com Weld Mold is internationally recognized for manufacturing specialty high-alloy welding electrodes, cored wire and solid wire product solutions. With over 3,000 performance-matched high-quality custom formulas for welding and floodwelding, as well as specially designed machinery to facilitate the flood- welding process, Weld Mold is your one-stop go-to solution source.ons Specially designed Machinery to facilitate Floodwelding Complete line of Products for Welding and Floodwelding ISO 9001 Certified 24_10_Prog_quadrat_A5.indd 8 24.10.18 19:14 EuroForgeAd9-18.qxp_EruroForge 9/24/18 10:52 AM Page 1 DDOONN’’TT JJUUSSTT RREEPPAAIIRR DDIIEESS PROGRAMME AT A GLANCE November 13, 2018 November 14, 2018 November 15, 2018 Tuesday Wednesday Thursday Increase Forge Die Life 09:00 Scientifi c by 50-100% In General Scientifi c presentations presentations 10:00 Coffee break Increase Open Hammer Coffee break Die Life by 700% 11:00 Industry Visit Us: Industry Exhibition presentations presentations Reduce the Cost of Die EUROFORGE 12:00 Scientifi c presentations Steel for Hammer or conFAIR 2018 Lunch break 13:00 Closing Press Dies by 10-30% Stand #10 Opening and Keynotes Exhibition Scientifi c 14:00 presentations Coffee break IINNCCRREEAASSEE DDIIEE LLIIFFEE &R&REEDDUUCCEE YYOOUURR CCOOSSTTSS 15:00 Coffee break Industry Exhibition Industry Forge die repair is only half our story. At Weld Mold, our mission is to extend Tel: +1 810-229-9521 16:00 presentations presentations forge die life, while reducing customer costs. web: weldmold.com Regional Weld Mold is internationally recognized for manufacturing specialty high-alloy 17:00 reports welding electrodes, cored wire and solid wire product solutions. With over 3,000 performance-matched high-quality custom formulas for welding and 18:00 floodwelding, as well as specially designed machinery to facilitate the flood- welding process, Weld Mold is your one-stop go-to solution source.ons 19:00 Welcome Specially designed Machinery reception to facilitate Floodwelding 20:00 21:00 Complete line of Products for Welding and Floodwelding ISO 9001 Certified EUROFORGE conFAIR 2018 | 9 24_10_Prog_quadrat_A5.indd 9 24.10.18 19:14 PROGRAMME TUESDAY, 13 NOVEMBER 2018 13:00–14:30 Opening and Keynotes Plenary room 13:00–13:15 Opening and Welcome A. Kanca & T. Hain - EUROFORGE 13:15–14:00 Political Keynote: The future of Europe - views on the political and economical challenges in the global context S. Gabriel - Former German Secretary of State 14:00–14:30 Scientific Keynote: Cooperative science for broader innovations M. Kleiner - Leibniz Association 14:30–15:30 Coffee break Industry exhibition 15:30–16:30 Industry presentations Breakout room II 15:30–16:00 Aluminium forging
Load more

Recommended publications
  • PFAS in Influent, Effluent, and Residuals of Wastewater Treatment Plants (Wwtps) in Michigan
    Evaluation of PFAS in Influent, Effluent, and Residuals of Wastewater Treatment Plants (WWTPs) in Michigan Prepared in association with Project Number: 60588767 Michigan Department of Environment, Great Lakes, and Energy April 2021 Evaluation of PFAS in Influent, Effluent, and Residuals of Project number: 60588767 Wastewater Treatment Plants (WWTPs) in Michigan Prepared for: Michigan Department of Environment, Great Lakes, and Energy Water Resources Division Stephanie Kammer Constitution Hall, 1st Floor, South Tower 525 West Allegan Street P.O. Box 30242 Lansing, MI 48909 Prepared by: Dorin Bogdan, Ph.D. Environmental Engineer, Michigan E-mail: [email protected] AECOM 3950 Sparks Drive Southeast Grand Rapids, MI 49546 aecom.com Prepared in association with: Stephanie Kammer, Jon Russell, Michael Person, Sydney Ruhala, Sarah Campbell, Carla Davidson, Anne Tavalire, Charlie Hill, Cindy Sneller, and Thomas Berdinski. Michigan Department of Environment, Great Lakes, and Energy Water Resources Division Constitution Hall 525 West Allegan P.O. Box 30473 Lansing, MI 48909 Prepared for: Michigan Department of Environment, Great Lakes, and Energy AECOM Evaluation of PFAS in Influent, Effluent, and Residuals of Project number: 60588767 Wastewater Treatment Plants (WWTPs) in Michigan Table of Contents 1. Introduction ......................................................................................................................................... 1 2. Background ........................................................................................................................................
    [Show full text]
  • Short-Cut Method to Assess a Gross Available Energy in a Medium-Load Screw Friction Press
    Article Short-Cut Method to Assess a Gross Available Energy in a Medium-Load Screw Friction Press A.J. Sánchez Egea 1,* ID , N. Deferrari 2, G. Abate 2, D. Martínez Krahmer 2 and L.N. López de Lacalle 1 ID 1 Department of Mechanical Engineering, Aeronautics Advanced Manufacturing Center (CFAA), Faculty of Engineering of Bilbao, Alameda de Urquijo s/n, 48013 Bilbao, Spain; [email protected] 2 Centro de Investigación y Desarrollo en Mecánica, Instituto Nacional de Tecnología Industrial INTI, Avenida General Paz 5445, 1650 Miguelete, Provincia de Buenos Aires, Argentina; [email protected] (N.D.); [email protected] (G.A.); [email protected] (D.M.K.) * Correspondence: [email protected] Received: 3 January 2018; Accepted: 9 March 2018; Published: 10 March 2018 Abstract: The present study proposed a rapid method, based on a previous universal compression tests, to estimate the required load capacity to cold forge different specimen quantity in a screw press. Accordingly, experimental and theoretical approach are performed to check new adjustable drive motor of the modified forging machine to achieve a gross available energy to deform the specimens preventing damage of the forging machine. During the forging experiments, two screw friction presses (as-received and modified) are used to validate the theoretical approach. The modified press exhibits an increase of 51% of gross energy and 11% of maximum load capacity compare to the as-received press. This method is used to improve the effective of the forging process avoiding excessive loads that could promote machine failure. Therefore, a low-cost and easy to implement methodology is proposed to determine the energy and load capacity of a screw friction press to forge different specimen quantities with symmetry pattern configurations.
    [Show full text]
  • Methods Used for the Compaction and Molding of Ceramic Matrix Composites Reinforced with Carbon Nanotubes
    processes Review Methods Used for the Compaction and Molding of Ceramic Matrix Composites Reinforced with Carbon Nanotubes Valerii P. Meshalkin and Alexey V. Belyakov * Mendeleev University of Chemical Technology of Russia (MUCTR), 9 Miusskaya Square, 125047 Moscow, Russia; [email protected] * Correspondence: [email protected]; Tel.: +7-495-4953866 Received: 2 August 2020; Accepted: 11 August 2020; Published: 18 August 2020 Abstract: Ceramic matrix composites reinforced with carbon nanotubes are becoming increasingly popular in industry due to their astonishing mechanical properties and taking into account the fact that advanced production technologies make carbon nanotubes increasingly affordable. In the present paper, the most convenient contemporary methods used for the compaction of molding masses composed of either technical ceramics or ceramic matrix composites reinforced with carbon nanotubes are surveyed. This stage that precedes debinding and sintering plays the key role in getting pore-free equal-density ceramics at the scale of mass production. The methods include: compaction in sealed and collector molds, cold isostatic and quasi-isostatic compaction; dynamic compaction methods, such as magnetic pulse, vibration, and ultrasonic compaction; extrusion, stamping, and injection; casting from aqueous and non-aqueous slips; tape and gel casting. Capabilities of mold-free approaches to produce precisely shaped ceramic bodies are also critically analyzed, including green ceramic machining and additive manufacturing technologies. Keywords: carbon nanotubes; ceramic matrix composites; compaction; molding; casting; powder mixtures; green bodies; plastic molding powders; slips; polymerizable monomers; solid freeform fabrication; machinery 1. Introduction Compaction molding is an important technological stage in the mass production of technical ceramics and ceramic matrix composites (hereinafter, CMCs).
    [Show full text]
  • B. F. Clyde's Cider Mill
    B. F. Clyde’s Cider Mill Established 1898 Old Mystic, Connecticut National Mechanical Engineering Site Dedication October 29, 1994 The American Society of Mechanical Engineers required equipment that was operated only once a History of Cider in the U.S. year, farmers found it more convenient to travel consid- Apple cider dates back to the earliest days of erable distances to bring their fruit to a large mill for English settlement in the thirteen colonies. Colonists processing into juice (sweet cider). Surplus apples brought seed from England to plant apple trees. could be sold or bartered to the mill owner who would Later, seedlings and whole trees were transported to produce cider to sell. Farmers returned home and used the colonies by wealthier colonists who established their own method of fermentation to produce cider. large apple orchards. Although apples were a staple In 1881, Mr. Ben- in the meager diet of jamin F. Clyde decided early settlers, the moti- to produce and sell cider vation for raising apple in Mystic, now referred trees was equally for to as Old Mystic. For the the purpose of making first few years, he cider. Cider was easy pressed his apples at lo- to make, stored well, cal mills. Eventually, he and provided a mildly bought a press and in- alcoholic drink for all to stalled it in rented space enjoy. Until approxi- in the corner of a local mately seventy years saw mill. He received ago, cider was what is power for his press from now referred to as “hard the saw mill’s line shaft.
    [Show full text]
  • (DPR) for Faecal Sludge and Septage Management
    Sanitation Capacity Building Platform TRAINING MODULE ON PREPARATION OF DETAILED PROJECT REPORT FOR FAECAL SLUDGE AND SEPTAGE MANAGEMENT PART A: PRESENTATION SLIDES National Institute of Urban Affairs TRAINING ON PREPARATION OF FAECAL SLUDGE AND SEPTAGE MANAGEMENT (FSSM) DETAILED PROJECT REPORT (DPR) Presentation Slides TITLE TRAINING MODULE ON PREPARATION OF DETAILED PROJECT REPORT FOR FAECAL SLUDGE AND SEPTAGE MANAGEMENT (PART A: PRESENTATION SLIDES) PUBLISHER NATIONAL INSTITUTE OF URBAN AFFAIRS, DELHI RESEARCH PROJECT SANITATION CAPACITY BUILDING PLATFORM Copyright © NIUA (2018) Year of Publishing: 2018 CONTENT The module is prepared by Ecosan Services Foundation (ESF), Pune DISCLAIMER While every effort has been made to ensure the correctness of data/information used in this training module, neither the authors nor NIUA accept any legal liability for the accuracy or inferences drawn from the material contained therein or for any consequences arising from the use of this material. No part of this module may be reproduced in any form (electronic or mechanical) without prior permission from or intimation to NIUA. The full module should be referenced as follows: NIUA (2018) “Training Module on Preparation of Detailed Project Report for Faecal Sludge and Septage Management (Part A: Presentation Slides).” Text from this module can be quoted provided the source is acknowledged. CONTACT National Institute of Urban Affairs 1st and 2nd floor Core 4B, India Habitat Centre, Lodhi Road, New Delhi 110003, India Website: www.niua.org, scbp.niua.org CONTENTS 1 Module ............................................................................................................................... 5 1.1 Assessment of Initial Situation ................................................................................... 7 1.1.1 Tools and methods for data collection .......................................................... 8 1.1.2 Data to be collected and Selection of treatment sites ............................
    [Show full text]
  • A New Route for Semi-Solid Steel Forging Tudor Balan, Eric Becker, Laurent Langlois, Régis Bigot
    A new route for semi-solid steel forging Tudor Balan, Eric Becker, Laurent Langlois, Régis Bigot To cite this version: Tudor Balan, Eric Becker, Laurent Langlois, Régis Bigot. A new route for semi-solid steel forging. CIRP Annals - Manufacturing Technology, Elsevier, 2017, 66 (1), pp.297-300. 10.1016/j.cirp.2017.04.111. hal-01560824 HAL Id: hal-01560824 https://hal.archives-ouvertes.fr/hal-01560824 Submitted on 12 Jul 2017 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Pre-print A new route for semi-solid steel forging Tudor Balan, Eric Becker, Laurent Langlois, Régis Bigot Laboratoire de Conception Fabrication Commande, LCFC (EA 4495), ENSAM – Metz Campus, 4 rue A Fresnel, 57078 Metz, France Submitted by Dorel Banabic Forging in semi-solid state significantly extends the possibilities of classical hot forging. In order to fully exploit its potential, the process requires a specific and demanding environment, penalizing its industrial deployment. In this context, an alternative route is proposed. In the proposed process, semi-solid zones at the heart of the material coexist with surrounding solid zones within the part. The outcome is an optimized process where the benefits of thixoforging are reached at a significant extent within the classical process framework of hot forging.
    [Show full text]
  • HOT FORMING of CAST STEEL CYLINDERS 1Jonathan URSINUS
    a . / w 9 HOT FOR4ING OF CAST STEEL CYLINDERS 1Jonathan UR1INU1, 1Martin BONHAGE, 12hristoph BzDENBENDER, 2Florian NzRNBERGER, 2E gen DEMLER, 1Bernd-Arno BEHREN1 1Institute of Forming Technology and ,achines (IFU,L, Leibni Universitt Dannover, Garbsen, Germany, EU ursinus%ifum.uni8hannover.de, bonhage%ifum.uni8hannover.de, behrens%ifum.uni8hannover.de .Institut für Werkstoffkunde (,aterials ScienceL, Leibni Universitt Dannover, Garbsen, Germany, EU, nürnberger%iw.uni8hannover.de, demler%iw.uni8hannover.de https://doi.org/10.37904/metal.2019.820 Abstract Regarding tool wear and energy cons mption when forging steel parts, tailored preform geometries are beneficial. In partic lar, the n mber of forging steps can be red ced, in comparison to conventionally rolled cylindrical stock material, if preformed billets are sed. In order to assess the potential offered by cast preforms as semi-finished prod cts for a s bse3 ent forging process, cylindrical steel billets .G422rMo40 were cast by sand casting and then pset with different degrees of deformation m .0.7-1.,0, forging temperat re .A00-1200 720 and ram speed .30-700 mm/s0. Forging of conventional rolled bar material nder the same forming conditions was sed as a reference. After forming, the specimens were heat treated and the mechanical properties were determined by tensile tests .DIN EN I1O A892-10 and notch impact tests .similar to DIN EN I1O 148-10. The microstr ct res were e6amined by metallographic analysis. For the investigated process variables, no significant infl ences on the tensile strengths or impact energies of the cast and forged specimens were fo nd. While the tensile strengths of the cast and forged specimens meet the val es of conventionally rolled and forged specimens, the impact energies of the cast and forged specimens s rpass those of the reference.
    [Show full text]
  • Design of Forming Processes: Bulk Forming
    1 Design of Forming Processes: Bulk Forming Chester J. Van Tyne Colorado School of Mines, Golden, Colorado, U.S.A. I. BULK DEFORMATION atures relative to the melting point of the metal. Hot working occurs at temperatures above tJllerecrystalliza- Bulk defonnation is a metal-fonning process where the tion temperature of the metal. There is a third temper- defonnation is three-dimensional in nature. The pri- ature range, warm working, which is being critically mary use of the tenn bulk deformation is to distinguish it examined due to energy savings and is, in some cases, from sheet-fonning processes. In sheet-forming opera- used by industries. tions, the defonnation stressesare usually in the plane of the sheet metal, whereas in bulk defonnation, the 1. Cold Working Temperatures defonnation stresses possess components in all three Cold working usually refers to metal deformation that is coordinate directions. Bulk defonnation includes metal carried out at room temperature. Th,~ phenomenon working processes such as forging, extrusion, rolling, associated with cold work occurs wht:n the metal is and drawing. deformed at temperatures that are about 30% or less of its melting temperature on an absolute temperature scale. During cold work, the metal ,~xperiences an II. CLASSIFICATION OF DEFORMATION increased number of dislocations and elltanglement of PROCESSES these dislocations, causing strain hardening. With strain hardening, the strength of the metal increases with The classification of deformation processescan be done deformation. To recrystallize the metal, ;i thermal treat- in one of several ways. The more common classification ment, called an anneal, is often needed. During anneal- schemes are based on temperature, flow behavior, and ing, the strength of the metal can be drastically reduced stressstate.
    [Show full text]
  • Downloadable App (Remote Accurately Determines the Rate, Total and Velocity of Water Flow
    IN MY WORDS: Education at AlexRenew begins in the lobby PAGE 20 HEARTS AND MINDS: Kids’ books tell the stories of water PAGE 18 tpomag.com AUGUST 2018 LET’S BE CLEAR: Show us your welcome sign PAGE 8 Travis Medina Operations Manager Fort Wayne, Ind. ‘Every Day Is Earth Day’ FORT WAYNE TURNS BIOSOLIDS AND WATER PLANT LIME RESIDUALS INTO BENEFICIAL PRODUCTS PAGE 32 All other trademarks are property of their respective owners. © 2018 Lakeside Equipment Corporation. Cleaner Water for a Brighter Future Cleaner Water Visit us at BOOTH #2028 October 1 - 3, 2018 ® and Raptor New Orleans, LA ® are trademarks owned by Lakeside Equipment Corporation. All wastewater treatment plants are not alike. That’s why plant designers prefer our Raptor® line of screening products, the innovative all-in-one units that screen, wash, convey and dewater screenings efficiently, capturing more fine solids and long fibers than other available screens. Raptor® products are adaptable to a wide range of configurations, giving you more choices for better performance in your unique application. They are preferred among plant operators for their simple operation, ease of use, and minimal maintenance. When performance counts, count on the industry leader for more than 85 years—Lakeside Equipment Corporation. Raptor® Screening Products Fine Screen Micro Strainer Rotating Drum Screen Septage Acceptance Plant Septage Complete Plant Complete Plant Wash Press FREE INFO – SEE ADVERTISER INDEX advertiser index AUGUST 2018 FREE FREE AdEdge Water INFO INFO Technologies, LLC ................ 21 ❒ Komline-Sanderson ................ 39 ❒ Aeration Industries International .......................... 37 ❒ Kuhn North America, Inc. ...... 65 ❒ Aerzen ........................................ 27 ❒ Lakeside Equipment Corporation ........................... 3 ❒ AllMax Software, Inc.
    [Show full text]
  • NIMS Machining Level I Preparation Guide Job Planning, Benchwork
    NIMS Machining Level I Preparation Guide Job Planning, Benchwork, and Layout Table of Contents Overview pages 2 – 5 • Introduction page 2 • Who Wrote the Questions page 2 • How to Prepare for the Credentialing Exam page 3 • Areas of Knowledge Measured by the Exam page 3, 4 • Before the Exam page 4 • At the Testing Site page 5 Machining Exam – Job Planning, Benchwork, and Layout pages 6 – 26 • Exam Content and Sample Question Overview page 6 • Exam Specification page 7 • Task List and Sample Questions pages 8 – 23 • Answer Key pages 24 ­26 © 2003 National Institute for Metalworking Skills, Inc. Page 1 of 26 Overview Introduction This preparation guide or test advisor is intended to help machinists study and prepare for the National Institute for Metalworking Skills (NIMS) written credentialing exam. The sample test will help prepare machinists to take the actual credentialing exam. None of the questions are duplicates from the actual exam. However, this preparation guide is a useful tool for reviewing technical knowledge and identifying areas of strength and deficiency so that the student has what is needed to do well on the exam. Achieving a NIMS credential is a means through which machinists can prove their abilities to themselves, to their instructors or employers, and to the customer. By passing the NIMS credentialing exam you will earn a valuable and portable credential. Because the test is tough, you will have the satisfaction of proving to yourself and others that you have reached a level of competency that is accepted nationally. Who Wrote the Questions A panel of technical experts, from all areas of the metalworking industry, wrote the questions used on the credentialing exam.
    [Show full text]
  • Oil Mill Gazetteer OFFICIAL ORGAN of the NATIONAL OIL MILL SUPERINTENDENTS* ASSOCIATION and TRI-STATES COTTONSEED OIL MILL SUPERINTENDENTS* ASSOCIATION
    SOLVENT EXTRACTION ISSUE Oil Mill Gazetteer OFFICIAL ORGAN OF THE NATIONAL OIL MILL SUPERINTENDENTS* ASSOCIATION AND TRI-STATES COTTONSEED OIL MILL SUPERINTENDENTS* ASSOCIATION Vol 51; No. 7 Wharton, Texas, January, 1947 Price 25 Cents nnoLincincj r u n i j , °f 3 i r m LUCIAN COLE DILL COLE Lucian Cole has purchased interest in the INDUSTRIAL MACHINERY COM PANY of Fort Worth, Texas, for his son, Dill. After three years in the Armed Services, Dill has returned to civilian life and has chosen to follow in his Father's footsteps in the Oil Mill Machinery business and is proud to announce his connections with the INDUSTRIAL MACHINERY COMPANY, FORT WORTH, TEXAS. INDUSTRIAL MACHINERY CO. is a new company, manufacturers of HELICOID SCREW CON­ VEYORS, STEEL CONVEYOR TROUGHS and accessories; a complete line of ELEVATING, CON­ VEYING and TRANSMISSION EQUIPMENT, and olher oil mill machinery. INDUSTRIAL MACHINERY COMPANY ARE ALSO REPRESENTATIVES FOR MANUFACTURERS OF THE original "ROTOR LIFT." INDUSTRIAL MACHINERY COMPANY solicits your most careful investigation as to their capacity and ability to serve you. INDUSTRIAL MACHINERY COMPANY Fort Worth, Texas 2300 South Main St. P. O. Box 1259 Phone: 4 -7 2 6 9 J. G. Thomas W. P. Thomas F. Dill Cole L. B. Dodson Purchasing Agent GOOD FOUNDATION ...THE FIRST STEP TOWARD FUTURE SUCCESS “Doc” MacGee says: You Build Soundly When You Buy SKELLYSOLVE Your future business depends on the quality of assurance of uniform quality do you have? your product, which in turn depends on Or of dependable delivery? the quality of the ingredients you use.
    [Show full text]
  • Preliminary Design and Construction of a Prototype Canola Seed Oil Extraction Machine
    PRELIMINARY DESIGN AND CONSTRUCTION OF A PROTOTYPE CANOLA SEED OIL EXTRACTION MACHINE A THESIS SUBMITTED TO THE GRADUATE SCHOOL OF NATURAL AND APPLIED SCIENCES OF MIDDLE EAST TECHNICAL UNIVERSITY BY PELİN SARI IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF SCIENCE IN MECHANICAL ENGINEERING JUNE 2006 Approval of the Graduate School of Natural and Applied Sciences __________________________ Prof. Dr. Canan ÖZGEN Director I certify that this thesis satisfies all the requirements as a thesis for the degree of Master of Science ___________________________ Prof. Dr. Kemal İDER Head of the Department This is to certify that we have read this thesis and that in our opinion it is fully adequate, in scope and quality, as a thesis for the degree of Master of Science ___________________________ Prof. Dr. Mustafa İlhan GÖKLER Supervisor Examining Committee Members: Prof. Dr. Metin AKKÖK (METU, ME) _________________ Prof. Dr. Mustafa İlhan GÖKLER (METU, ME) _________________ Prof. Dr. Kemal İder (METU, ME) _________________ Prof. Dr. Ali GÖKMEN (METU, CHEM) _________________ Prof. Dr. İnci GÖKMEN (METU, CHEM) _________________ I hereby declare that all information in this document has been obtained and presented in accordance with academic rules and ethical conduct. I also declare that, as required by these rules and conduct, I have fully cited and referenced all material and results that are not original to this work. Pelin SARI iii ABSTRACT PRELIMINARY DESIGN AND CONSTRUCTION OF A PROTOTYPE CANOLA SEED OIL EXTRACTION MACHINE SARI, Pelin M.Sc., Department of Mechanical Engineering Supervisor: Prof. Dr. Mustafa İlhan GÖKLER June 2006, 109 Pages Growing energy demand in the world force people to investigate alternative energy sources.
    [Show full text]