DOCSLIB.ORG

MW Article Index

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
MW Article Index MW Article Index Article Title Author Name Subject Issue Page A Rocking, Swinging Grinder Table Harold Mason Shop Machinery MW Vol. 01 No. 1 Feb-Mar 1988 4 Old Lathe Collet Adapters Philip Duclos Lathes MW Vol. 01 No. 1 Feb-Mar 1988 12 A Vernier Dividing Head Alberto Marx Shop Machinery MW Vol. 01 No. 1 Feb-Mar 1988 16 Surface Grinding On a Vertical Mill Aubrey Keet Mills MW Vol. 01 No. 1 Feb-Mar 1988 19 A Band Saw Speed Reducer Bob Nelson Shop Machinery MW Vol. 01 No. 1 Feb-Mar 1988 22 Curved Spoke Flywheel Philip Duclos Projects MW Vol. 01 No. 2 Apr-May 1988 4 A Double-ended Dial Indicator Adapter Guy Lautard Shop Machinery MW Vol. 01 No. 2 Apr-May 1988 12 Automatic Carriage Stop R. P. Lebaron Lathes MW Vol. 01 No. 2 Apr-May 1988 15 A Reverse for a Small Lathe E. T. Feller Lathes MW Vol. 01 No. 2 Apr-May 1988 16 Belt Sander Robert S. Hedin Shop Machinery MW Vol. 01 No. 2 Apr-May 1988 20 Basic Metal Finishes James B. Harrill General Machining Knowledge MW Vol. 01 No. 3 Jun-Jul 1988 3 Make Your Own Collet Chuck Pat Loop Lathes MW Vol. 01 No. 3 Jun-Jul 1988 4 Adjustable Try Squares Ted Wright Shop Accessories MW Vol. 01 No. 3 Jun-Jul 1988 8 Brass Hammer Bill Davidson Shop Accessories MW Vol. 01 No. 3 Jun-Jul 1988 12 Unorthodox Mill/Lathe Grinder Philip Duclos Shop Machinery MW Vol. 01 No. 3 Jun-Jul 1988 15 A Simple Rotary Table Stephen G. Wellcome Shop Machinery MW Vol. 01 No. 3 Jun-Jul 1988 22 An Untapped Source for Cast Iron Stock John Kopf Techniques MW Vol. 01 No. 4 Aug-Sep 1988 3 A Parallel Arm Scroll Saw Robert S. Hedin Shop Machinery MW Vol. 01 No. 4 Aug-Sep 1988 4 Machine Tools for Woodworking Ted Roubal Machine Tools MW Vol. 01 No. 4 Aug-Sep 1988 12 A Supplementary Tilting Milling Table Michael T. Yamamoto Mills MW Vol. 01 No. 4 Aug-Sep 1988 17 Making a Cylindrical Square Ted Wright Machining Accessories MW Vol. 01 No. 4 Aug-Sep 1988 18 Greater Precision for Scroll Chucks Richard S. Torgerson Techniques MW Vol. 01 No. 4 Aug-Sep 1988 21 A Four-Station Grinder James D. Scharplaz, P.E. Machine Tools MW Vol. 01 No. 5 Oct-Nov 1988 4 Button V-Block Ed Dubosky Workholding MW Vol. 01 No. 5 Oct-Nov 1988 12 Model Builder’s Hand Vise William F. Green Hand Tools MW Vol. 01 No. 5 Oct-Nov 1988 22 A 32-Pounder Seacoast Cannon William F. Green Hobby Items MW Vol. 01 No. 6 Dec 1988-Jan 1989 4 A Ram Tailstock Theodore M. Clarke Machining Accessories MW Vol. 01 No. 6 Dec 1988-Jan 1989 11 The Presentation Swarf Collector Bruce Jones Machining Accessories MW Vol. 01 No. 6 Dec 1988-Jan 1989 12 Locating John B. Gascoyne General Machining Knowledge MW Vol. 01 No. 6 Dec 1988-Jan 1989 14 Two Designs for Welding Tables Richard B. Walker Welding/Foundry/Forging MW Vol. 01 No. 6 Dec 1988-Jan 1989 17 Steady Improvement W.B Vaughan Techniques MW Vol. 01 No. 6 Dec 1988-Jan 1989 20 Making a Milling Saw Arbor George W. Genevro Machining Accessories MW Vol. 01 No. 6 Dec 1988-Jan 1989 22 Saddle V-Block Ed Dubosky Machining Accessories MW Vol. 02 No. 1 Feb-Mar 1989 4 A Lathe Four-way Tool Turret Robert C. Hannum Machining Accessories MW Vol. 02 No. 1 Feb-Mar 1989 11 Lathe Threading Stop Robert S. Hedin Machining Accessories MW Vol. 02 No. 1 Feb-Mar 1989 14 A Change-Gear Bracket Steve Harman Machining Accessories MW Vol. 02 No. 1 Feb-Mar 1989 17 Downfeed Scale Glenn L. Wilson Machining Accessories MW Vol. 02 No. 1 Feb-Mar 1989 22 Collar Substitute Thomas LaMance Tips & Tricks MW Vol. 02 No. 1 Feb-Mar 1989 24 Holding Material in Place Thomas LaMance Tips & Tricks MW Vol. 02 No. 1 Feb-Mar 1989 24 Keeping Track of the Chuck Wrench Thomas LaMance Tips & Tricks MW Vol. 02 No. 1 Feb-Mar 1989 24 A More Versatile Tool Norm Wells Tips & Tricks MW Vol. 02 No. 1 Feb-Mar 1989 24 Odd Thickness Spacers Charles Birmingham Tips & Tricks MW Vol. 02 No. 1 Feb-Mar 1989 24 Turn a Shaft Without a Center Hole Norm Wells Techniques MW Vol. 02 No. 1 Feb-Mar 1989 24 Welding Light Steel Metal Thomas LaMance Tips & Tricks MW Vol. 02 No. 1 Feb-Mar 1989 24 Auxiliary Tailstock Center Thomas LaMance Tips & Tricks MW Vol. 02 No. 2 Apr-May 1989 3 Avoiding Hazards Thomas LaMance Tips & Tricks MW Vol. 02 No. 2 Apr-May 1989 3 Cutting Keyways Inside Holes Thomas LaMance Tips & Tricks MW Vol. 02 No. 2 Apr-May 1989 3 Getting a Better View Thomas LaMance Tips & Tricks MW Vol. 02 No. 2 Apr-May 1989 3 Square Stock in the Universal Chuck Thomas LaMance Tips & Tricks MW Vol. 02 No. 2 Apr-May 1989 3 Two Handy Jigs Ed Dubosky Shop Accessories MW Vol. 02 No. 2 Apr-May 1989 4 Mill/Drill Attachments Paul J. Holm Machining Accessories MW Vol. 02 No. 2 Apr-May 1989 11 Lathe Tips Richard S. Torgerson Techniques MW Vol. 02 No. 2 Apr-May 1989 12 Squaring the Circle Alberto Marx Techniques MW Vol. 02 No. 2 Apr-May 1989 15 Cross-feed Lever Richard S. Torgerson Machining Accessories MW Vol. 02 No. 2 Apr-May 1989 18 Hardness Tester Lou Hinshaw General Machining Knowledge MW Vol. 02 No. 2 Apr-May 1989 21 Accurate Drilling Through Bolts Thomas LaMance Tips & Tricks MW Vol. 02 No. 2 Apr-May 1989 24 Broken Taps Thomas LaMance Tips & Tricks MW Vol. 02 No. 2 Apr-May 1989 24 Filing Flat Tim Smith Tips & Tricks MW Vol. 02 No. 2 Apr-May 1989 24 Protecting Your Chisels Thomas LaMance Techniques MW Vol. 02 No. 2 Apr-May 1989 24 Removing Bushings From Blind Holes Thomas LaMance Tips & Tricks MW Vol. 02 No. 2 Apr-May 1989 24 Tailstock Troubles Thomas LaMance Tips & Tricks MW Vol. 02 No. 2 Apr-May 1989 24 A Milling Column Houston Taylor Machining Accessories MW Vol. 02 No. 3 Jun-Jul 1989 4 Can You Handle It? Harold Mason Machining Accessories MW Vol. 02 No. 3 Jun-Jul 1989 10 Reversible Lathe Die Holder Percy Blandford Machining Accessories MW Vol. 02 No. 3 Jun-Jul 1989 19 A Depth Gage Marshall R. Young Hand Tools MW Vol. 02 No. 3 Jun-Jul 1989 20 Tapers on Oblong Pieces James Hamill Techniques MW Vol. 02 No. 3 Jun-Jul 1989 22 Protecting Taps Thomas LaMance Tips & Tricks MW Vol. 02 No. 3 Jun-Jul 1989 26 GripsAll Indicator Base Richard S. Torgerson Shop Accessories MW Vol. 02 No. 4 Aug-Sep 1989 4 A Quick-change Gearbox Eugene Toscano Machining Accessories MW Vol. 02 No. 4 Aug-Sep 1989 10 Adjustable Pop-stop Marshall R. Young Machining Accessories MW Vol. 02 No. 4 Aug-Sep 1989 15 Drill Grinder Attachment Mount Richard S. Torgerson Machining Accessories MW Vol. 02 No. 4 Aug-Sep 1989 18 Engine Turning Bob Marchese Techniques MW Vol. 02 No. 4 Aug-Sep 1989 22 Centering a Gear Cutter Thomas LaMance Tips & Tricks MW Vol. 02 No. 4 Aug-Sep 1989 24 Cleaning Files Thomas LaMance Tips & Tricks MW Vol. 02 No. 4 Aug-Sep 1989 24 Cutting Duplicate Short Lengths Thomas LaMance Tips & Tricks MW Vol. 02 No. 4 Aug-Sep 1989 24 Sharp Return Bends Thomas LaMance Tips & Tricks MW Vol. 02 No. 4 Aug-Sep 1989 24 Transferring Hole Locations Thomas LaMance Tips & Tricks MW Vol. 02 No. 4 Aug-Sep 1989 24 Drill Guide Thomas LaMance Tips & Tricks MW Vol. 02 No. 4 Aug-Sep 1989 26 Nice Priced Handwheel Ray Beals Tips & Tricks MW Vol. 02 No. 4 Aug-Sep 1989 26 Using Brass Shim Stock H. T. Biddle Tips & Tricks MW Vol. 02 No. 4 Aug-Sep 1989 26 Boring Bar from Worn-out Bits Gene Elliott Tips & Tricks MW Vol. 02 No. 4 Aug-Sep 1989 28 Eyebolt Chuck Thomas LaMance Tips & Tricks MW Vol. 02 No. 4 Aug-Sep 1989 28 A Quick Setup Gage Thomas LaMance Tips & Tricks MW Vol. 02 No. 4 Aug-Sep 1989 28 Clamping the Tailstock Thomas LaMance Tips & Tricks MW Vol. 02 No. 5 Oct-Nov 1989 3 Finding the Socket Thomas LaMance Tips & Tricks MW Vol. 02 No. 5 Oct-Nov 1989 3 Protecting Your Chisels Thomas LaMance Tips & Tricks MW Vol. 02 No. 5 Oct-Nov 1989 3 A Quick Setup Gage Thomas LaMance Tips & Tricks MW Vol. 02 No. 5 Oct-Nov 1989 3 Improve Your Mill/Drill Machine Bill Davidson Techniques MW Vol. 02 No. 5 Oct-Nov 1989 4 A Pipe Center for your Lathe James D. Scharplaz, P.E. Machining Accessories MW Vol. 02 No. 5 Oct-Nov 1989 8 A Quick-change Gearbox Eugene Toscano Machining Accessories MW Vol. 02 No. 5 Oct-Nov 1989 11 A Huff ‘n Puff Engine Philip Duclos Engines MW Vol. 02 No. 5 Oct-Nov 1989 14 Dividing Head Index Plates D. E. Johnson Machining Accessories MW Vol. 02 No. 6 Dec 1989-Jan 1990 4 Better File Handles Bob Patrick Hand Tools MW Vol. 02 No. 6 Dec 1989-Jan 1990 8 Wing Divider Dave Gingery Machining Accessories MW Vol.
Load more

Recommended publications
  • Revealing Internal Flow Behaviour in Arc Welding and Additive
    ARTICLE https://doi.org/10.1038/s41467-018-07900-9 OPEN Revealing internal flow behaviour in arc welding and additive manufacturing of metals Lee Aucott 1, Hongbiao Dong 2, Wajira Mirihanage3, Robert Atwood 4, Anton Kidess5,10, Shian Gao2, Shuwen Wen6,11, John Marsden6, Shuo Feng2, Mingming Tong7,12, Thomas Connolley 4, Michael Drakopoulos4, Chris R. Kleijn5, Ian M. Richardson8, David J. Browne7, Ragnvald H. Mathiesen9 & Helen.V. Atkinson2,13 1234567890():,; Internal flow behaviour during melt-pool-based metal manufacturing remains unclear and hinders progression to process optimisation. In this contribution, we present direct time- resolved imaging of melt pool flow dynamics from a high-energy synchrotron radiation experiment. We track internal flow streams during arc welding of steel and measure instantaneous flow velocities ranging from 0.1 m s−1 to 0.5 m s−1. When the temperature- dependent surface tension coefficient is negative, bulk turbulence is the main flow mechanism and the critical velocity for surface turbulence is below the limits identified in previous theoretical studies. When the alloy exhibits a positive temperature-dependent surface tension coefficient, surface turbulence occurs and derisory oxides can be entrapped within the subsequent solid as result of higher flow velocities. The widely used arc welding and the emerging arc additive manufacturing routes can be optimised by controlling internal melt flow through adjusting surface active elements. 1 United Kingdom Atomic Energy Authority, Culham Science Centre, Abingdon, Oxfordshire OX14 3DB, UK. 2 Department of Engineering, University of Leicester, Leicester LE1 7RH, UK. 3 School of Materials, University of Manchester, Manchester M13 9PL, UK.
    [Show full text]
  • Distal Radius System 2.5
    PRODUCT INFORMATION Distal Radius System 2.5 APTUS® Wrist 2 | Distal Radius System 2.5 Contents 3 A New Generation of Radius Plates 4 One System for Primary and Secondary Reconstruction 6 ADAPTIVE II Distal Radius Plates 8 FPL Plates 10 Hook Plates 11 Lunate Facet Plates 12 Rim Plates 13 Fracture Plates 14 Correction Plates 15 Volar Frame Plates 16 Extra-Articular Plates 17 Small Fragment Plates 18 Dorsal Frame Plates 19 XL Plates 20 Distal Ulna Plates 21 Fracture Treatment Concept 22 Technology, Biomechanics, Screw Features 24 Precisely Guided Screw Placement 25 Instrument for Reconstruction of the Volar Tilt 26 Storage 27 Overview Screw Trajectories 29 Ordering Information 47 Bibliography For further information regarding the APTUS product line visit: www.medartis.com Medartis, APTUS, MODUS, TriLock, HexaDrive and SpeedTip are registered trademarks of Medartis AG / Medartis Holding AG, 4057 Basel, Switzerland www.medartis.com Distal Radius System 2.5 | 3 A New Generation of Radius Plates Why is a new generation of radius plates needed? Distal radius fractures are the most common fractures of the stable plate systems have enabled open reduction and inter- upper extremities. The knowledge of these fractures has grown nal fixation to become an established treatment method for enormously over the last years. Treatment concepts have like- intra- and extra-articular distal radius fractures. These sys- wise been refined. It is now generally accepted that the best tems have enabled even severe extension fractures with dor- possible anatomical reconstruction of the radiocarpal joint sal defect zones to be precisely repositioned and treated with (RCJ) and distal radioulnar joint (DRUJ) to produce a func- osteosynthesis via volar access without the need for additional tional outcome is a requirement.
    [Show full text]
  • Numerical Control (NC) Fundamentals
    Lab Sheet for CNC Laboratory Department of Production Engineering and Metallurgy Prepared by: Dr. Laith Abdullah Mohammed Production Engineering – CNC Lab Lab Sheet Numerical Control (NC) Fundamentals What is Numerical Control (NC)? Form of programmable automation in which the processing equipment (e.g., machine tool) is controlled by coded instructions using numbers, letter and symbols - Numbers form a set of instructions (or NC program) designed for a particular part. - Allows new programs on same machined for different parts. - Most important function of an NC system is positioning (tool and/or work piece). When is it appropriate to use NC? 1. Parts from similar raw material, in variety of sizes, and/or complex geometries. 2. Low-to-medium part quantity production. 3. Similar processing operations & sequences among work pieces. 4. Frequent changeover of machine for different part numbers. 5. Meet tight tolerance requirements (compared to similar conventional machine tools). Advantages of NC over conventional systems: Flexibility with accuracy, repeatability, reduced scrap, high production rates, good quality. Reduced tooling costs. Easy machine adjustments. More operations per setup, less lead time, accommodate design change, reduced inventory. Rapid programming and program recall, less paperwork. Faster prototype production. Less-skilled operator, multi-work possible. Limitations of NC: · Relatively high initial cost of equipment. · Need for part programming. · Special maintenance requirements. · More costly breakdowns. Advantages
    [Show full text]
  • OVERVIEW of FOUNDRY PROCESSES Contents 1
    Cleaner Production Manual for the Queensland Foundry Industry November 1999 PART 5: OVERVIEW OF FOUNDRY PROCESSES Contents 1. Overview of Casting Processes...................................................................... 3 2. Casting Processes.......................................................................................... 6 2.1 Sand Casting ............................................................................................ 6 2.1.1 Pattern Making ................................................................................... 7 2.1.2 Mould Making ..................................................................................... 7 2.1.3 Melting and Pouring ........................................................................... 8 2.1.4 Cooling and Shakeout ........................................................................ 9 2.1.5 Sand Reclamation .............................................................................. 9 2.1.6 Fettling, Cleaning and Finishing....................................................... 10 2.1.7 Advantages of Sand Casting............................................................ 10 2.1.8 Limitations ........................................................................................ 10 2.1.9 By-products Generated .................................................................... 10 2.2 Shell Moulding ........................................................................................ 13 2.2.1 Advantages......................................................................................
    [Show full text]
  • VARIABLE ANGLE LOCKING HAND SYSTEM for Fragment-Specific Fracture Fixation with Variable Angle Locking and Locking Technology
    VARIABLE ANGLE LOCKING HAND SYSTEM For fragment-specific fracture fixation with variable angle locking and locking technology SURGICAL TECHNIQUE TABLE OF CONTENTS INTRODUCTION Variable Angle Locking Hand System Overview 2 AO Principles 5 Indications 6 Featured Plates & Technique Highlights 7 Screws in the System 18 Featured Instruments 20 SURGICAL TECHNIQUE Preoperative Planning and Reduction 27 Lag Screw Insertion (Optional) 29 Prepare and Insert Plate 37 Insert Screw 50 Implant Removal 51 PRODUCT INFORMATION Implants 54 Instruments 63 Graphic Cases 70 Set Lists 77 Image intensifier control Variable Angle Locking Hand System Surgical Technique DePuy Synthes Companies VARIABLE ANGLE LOCKING HAND SYSTEM OVERVIEW The DePuy Synthes Variable Angle Locking Hand System consists of plates that are anatomic, procedure-specific, and available in both stainless steel and titanium. The Variable Angle Locking Hand System offers instrumentation to aid in: x fracture reduction x provisional fixation x plate adaptation x construct creation Designed for the Surgeon and Patient A dedicated, global surgeon team was integral to the design of this system through extensive consultation and participation in multiple design labs. Surgeon interviews, design and development meetings, and collaboration with key opinion leaders determined the clinical components necessary for the DePuy Synthes Variable Angle Locking Hand System. DePuy Synthes Companies are dedicated to improving patient care. System Snapshot x Extensive system of anatomically precontoured plates x First to the market with 1.3 mm locking screws for hand plating1 x Forceps that aid in fracture reduction and lag screw application x Forceps that aid in plate fixation x Self-retaining screwdrivers x Plates available in 316L stainless steel and titanium x Color-coded instruments 1DePuy Synthes Companies market analysis of leading orthopaedic companies, conducted May 2015.
    [Show full text]
  • Milling Fixtures Principles of Their Design and Examples from Practice Third Revised Edition
    UC-NRLF 25 CENTS B 3 Dlfi 742 MILLING FIXTURES PRINCIPLES OF THEIR DESIGN AND EXAMPLES FROM PRACTICE THIRD REVISED EDITION MACHINERY'S REFERENCE SERIES NO. 4 PUBLISHED BY MACHINERY, NEW YORK MACHINERY'S REFERENCE SERIES EACH NUMBER IS ONE UNIT IN A COMPLETE LIBRARY OF MACHINE DESIGN AND SHOP PRACTICE REVISED AND REPUBLJSHED FROM MACHINERY NUMBER 4 MILLING FIXTURES THIRD REVISED EDITION CONTENTS Elementary Principles of Milling Fixtures, by E. R. MARKHAM - 3 Examples of Milling Fixtures 26 Copyright, 1912, The Industrial Press, Publishers of MACHINERY 49-55 Lafayette Street, New York City X CHAPTER I ELEMENTARY PRINCIPLES OP MILLING MACHINE FIXTURES* The principal consideration, when designing fixtures that are to be fastened solidly to the table of a milling machine, should be to have the fixture firm enough to admit working the machine and cutter to their limit of endurance. In fact, the fixture should be stronger than the machine itself, and able to resist any possible strain that the cutter can exert. While fixtures should be strong, the movable parts should be so made as to be easily manipulated. All bearing and locat- ing points should be accessible to facilitate the removal of chips and dirt. The action of the clamping devices should be rapid, so that no time is lost in manipulating them. The Milling Machine Vise-False Vise Jaws The first fixture to consider is the milling machine vise, which has a stationary and a movable jaw, against which are placed removable jaws, held in place by means of screws. The stationary-removable jaw generally has connected with it any shelf, pins, or means for locating the pieces to be machined.
    [Show full text]
  • PFAS in Influent, Effluent, and Residuals of Wastewater Treatment Plants (Wwtps) in Michigan
    Evaluation of PFAS in Influent, Effluent, and Residuals of Wastewater Treatment Plants (WWTPs) in Michigan Prepared in association with Project Number: 60588767 Michigan Department of Environment, Great Lakes, and Energy April 2021 Evaluation of PFAS in Influent, Effluent, and Residuals of Project number: 60588767 Wastewater Treatment Plants (WWTPs) in Michigan Prepared for: Michigan Department of Environment, Great Lakes, and Energy Water Resources Division Stephanie Kammer Constitution Hall, 1st Floor, South Tower 525 West Allegan Street P.O. Box 30242 Lansing, MI 48909 Prepared by: Dorin Bogdan, Ph.D. Environmental Engineer, Michigan E-mail: [email protected] AECOM 3950 Sparks Drive Southeast Grand Rapids, MI 49546 aecom.com Prepared in association with: Stephanie Kammer, Jon Russell, Michael Person, Sydney Ruhala, Sarah Campbell, Carla Davidson, Anne Tavalire, Charlie Hill, Cindy Sneller, and Thomas Berdinski. Michigan Department of Environment, Great Lakes, and Energy Water Resources Division Constitution Hall 525 West Allegan P.O. Box 30473 Lansing, MI 48909 Prepared for: Michigan Department of Environment, Great Lakes, and Energy AECOM Evaluation of PFAS in Influent, Effluent, and Residuals of Project number: 60588767 Wastewater Treatment Plants (WWTPs) in Michigan Table of Contents 1. Introduction ......................................................................................................................................... 1 2. Background ........................................................................................................................................
    [Show full text]
  • Short-Cut Method to Assess a Gross Available Energy in a Medium-Load Screw Friction Press
    Article Short-Cut Method to Assess a Gross Available Energy in a Medium-Load Screw Friction Press A.J. Sánchez Egea 1,* ID , N. Deferrari 2, G. Abate 2, D. Martínez Krahmer 2 and L.N. López de Lacalle 1 ID 1 Department of Mechanical Engineering, Aeronautics Advanced Manufacturing Center (CFAA), Faculty of Engineering of Bilbao, Alameda de Urquijo s/n, 48013 Bilbao, Spain; [email protected] 2 Centro de Investigación y Desarrollo en Mecánica, Instituto Nacional de Tecnología Industrial INTI, Avenida General Paz 5445, 1650 Miguelete, Provincia de Buenos Aires, Argentina; [email protected] (N.D.); [email protected] (G.A.); [email protected] (D.M.K.) * Correspondence: [email protected] Received: 3 January 2018; Accepted: 9 March 2018; Published: 10 March 2018 Abstract: The present study proposed a rapid method, based on a previous universal compression tests, to estimate the required load capacity to cold forge different specimen quantity in a screw press. Accordingly, experimental and theoretical approach are performed to check new adjustable drive motor of the modified forging machine to achieve a gross available energy to deform the specimens preventing damage of the forging machine. During the forging experiments, two screw friction presses (as-received and modified) are used to validate the theoretical approach. The modified press exhibits an increase of 51% of gross energy and 11% of maximum load capacity compare to the as-received press. This method is used to improve the effective of the forging process avoiding excessive loads that could promote machine failure. Therefore, a low-cost and easy to implement methodology is proposed to determine the energy and load capacity of a screw friction press to forge different specimen quantities with symmetry pattern configurations.
    [Show full text]
  • Implementation of Metal Casting Best Practices
    Implementation of Metal Casting Best Practices January 2007 Prepared for ITP Metal Casting Authors: Robert Eppich, Eppich Technologies Robert D. Naranjo, BCS, Incorporated Acknowledgement This project was a collaborative effort by Robert Eppich (Eppich Technologies) and Robert Naranjo (BCS, Incorporated). Mr. Eppich coordinated this project and was the technical lead for this effort. He guided the data collection and analysis. Mr. Naranjo assisted in the data collection and analysis of the results and led the development of the final report. The final report was prepared by Robert Naranjo, Lee Schultz, Rajita Majumdar, Bill Choate, Ellen Glover, and Krista Jones of BCS, Incorporated. The cover was designed by Borys Mararytsya of BCS, Incorporated. We also gratefully acknowledge the support of the U.S. Department of Energy, the Advanced Technology Institute, and the Cast Metals Coalition in conducting this project. Disclaimer This report was prepared as an account of work sponsored by an Agency of the United States Government. Neither the United States Government nor any Agency thereof, nor any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any Agency thereof. The views and opinions expressed by the authors herein do not necessarily state or reflect those of the United States Government or any Agency thereof.
    [Show full text]
  • Methods Used for the Compaction and Molding of Ceramic Matrix Composites Reinforced with Carbon Nanotubes
    processes Review Methods Used for the Compaction and Molding of Ceramic Matrix Composites Reinforced with Carbon Nanotubes Valerii P. Meshalkin and Alexey V. Belyakov * Mendeleev University of Chemical Technology of Russia (MUCTR), 9 Miusskaya Square, 125047 Moscow, Russia; [email protected] * Correspondence: [email protected]; Tel.: +7-495-4953866 Received: 2 August 2020; Accepted: 11 August 2020; Published: 18 August 2020 Abstract: Ceramic matrix composites reinforced with carbon nanotubes are becoming increasingly popular in industry due to their astonishing mechanical properties and taking into account the fact that advanced production technologies make carbon nanotubes increasingly affordable. In the present paper, the most convenient contemporary methods used for the compaction of molding masses composed of either technical ceramics or ceramic matrix composites reinforced with carbon nanotubes are surveyed. This stage that precedes debinding and sintering plays the key role in getting pore-free equal-density ceramics at the scale of mass production. The methods include: compaction in sealed and collector molds, cold isostatic and quasi-isostatic compaction; dynamic compaction methods, such as magnetic pulse, vibration, and ultrasonic compaction; extrusion, stamping, and injection; casting from aqueous and non-aqueous slips; tape and gel casting. Capabilities of mold-free approaches to produce precisely shaped ceramic bodies are also critically analyzed, including green ceramic machining and additive manufacturing technologies. Keywords: carbon nanotubes; ceramic matrix composites; compaction; molding; casting; powder mixtures; green bodies; plastic molding powders; slips; polymerizable monomers; solid freeform fabrication; machinery 1. Introduction Compaction molding is an important technological stage in the mass production of technical ceramics and ceramic matrix composites (hereinafter, CMCs).
    [Show full text]
  • Millimeter Wave Linac and Wiggler Structures
    MM-Wave Linac and Wiggler Structures H. Henke Technical University Berlin Institut fuer Theoretische Elektrotechnik Einsteinufer 17, EN 2 D- 10587 Berlin Abstract In an international collaboration a new technology is kW RF peak power for 1 mA current. This is a reasonably being developed for a 50 MeV millimeter RF-wavelength low power level for designing new sources, for instance little electron linear accelerator complex for production of coherent sheet beam klystrinos also in planar technology. Then, the tunable synchrotron radiation. The accclcrator components and whole device would fit on a standardlab table. the wiggler are being designed with planar geometries suitable 2.5MeV F MeV for deep X-ray lithography and subsequent electroplating F5o”r:e bUrK’1P”l (LIGA) or for etching and electroplating silicon wafers. The b&c design ideas of different components for bunching, pre- acceleration, acceleration, focussing and the wiggler are presented. hem 1. INTRODUCTION Micromechanic technology has developed a vast range of fabricational methods for devices in the submillimeter range: high precision stamping, diamond lathes, laser cutting, diffusion bonding, lithography and etching of silicon wafers and deep X-ray lithography with subsequent electroplating Fig. 1 Conceptual design of an integrated mm-wave (LIGA [ll). So, the technology is available for studying and ndiaton source (IMIRAS) eventually building high precision accelerator components and struclures for very high RF frcquencics, let us say above 100 The paper presents different RF structures for acceleration GHz. In this context it is of great importance that the relative and pre-acceleration, possible focussing devices and structures dimensional and frequency tolerances increase with tie square for a microwave wiggler.
    [Show full text]
  • Rotary Table
    2020-12-14 13:47 Doc. No. DIU-10D00-OM002-D PRODUCT NAME Rotary Table MODEL / Series / Product Number MSQ DI027773 2020-12-14 13:47 Contents Safety Instructions 2 Outline 18 How to order 18 Specifications 19 Weight 20 Effective torque 20 Internal construction and parts 21 MSQ10 to 50 21 Made to Order 22 Basic circuit 23 Circuit structure 23 Recommended models 23 Mounting 24 Load restrictions 24 Bolts for mounting product 24 Rotation direction and rotation angle 27 Rotating range example 28 Special angle adjustment tool 29 Angle adjustment using the special tool 29 Piping 30 Air supply 30 Setting of rotation time 31 Moment of inertia 31 Calculation formulae for moment of inertia 32 Kinetic energy 33 Auto switch 34 Internal structure and operation principle 34 Mounting of auto switch 34 Auto switch proper mounting position at rotation end 35 Maintenance and Inspection 36 Regular check 36 Replacement procedure of the seal kit 36 Specific product precautions 45 Troubleshooting 48 -1- DI027773 2020-12-14 13:47 Safety Instructions These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC)*1), and other safety regulations. *1) ISO 4414: Pneumatic fluid power -- General rules relating to systems. ISO 4413: Hydraulic fluid power -- General rules relating to systems. IEC 60204-1: Safety of machinery -- Electrical equipment of machines .(Part 1: General requirements) ISO 10218-1992: Manipulating industrial robots -Safety.
    [Show full text]