DOCSLIB.ORG

Flame Resistant Apparel

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Flame Resistant Apparel Flame Resistant Apparel FireWear® Public Safety Pant PA08- 55% FFR™ (Fibrous Flame Retardant Fiber) 45% Cotton Twill Weave • Fabric weight 9.5 oz. • Self-locking brass zipper with NO- • Uniform style with permanent creases MEX® zipper tape • Hook and eye closure with french fly • Seven belt loops will take 2” belt • Bottoms of side pockets are rein- • Two welted hip pockets; left one has forced using “X” bartack button and loop closure • Two inserted front pockets • Sewn throughout with NOMEX® • Outseams are reinforced by topstitch- thread ing entire length NFPA 70E Arc Rating 7905 Navy 9.5 oz. - 11.5 PPE Category 2 Denim Jeans CJ01-Flame Resistant 100% Cotton FR Denim • Fabric weight 14 oz. buttonhole • Jean style with scooped front pockets • Two patch hip pockets on back • Right pocket has watch pocket • Seven belt loops will take 2” belt • Brass zipper with Aramid tape • FR pockets • Waistband closes with shank button and • Sewn throughout with Aramid thread NFPA 70E Arc Rating 22529 14.0 oz. - 21.0 Blue Denim PPE Category 2 PRICING GUIDE AND CATALOG COMING SOON! 800.901.4784 PinnacleTextile.com NOMEX® EMS Pant PA65- 55% FFR™ (Fibrous Flame Retardant Fiber) 45% Cotton Twill Weave • Fabric weight 9.5 oz. • Hook and eye waist closure with french • Large cargo pocket on left leg with flap fly that closes with two hidden snaps • Fully lined waistband with FR shirt grip • Right leg has EMS scissor pocket • Two patch hip pockets; with hidden • Bottoms of side pockets are reinforced snap closures using “X” bartack • Seven belt loops will take 2” belt • Two inserted front pockets • Sewn throughout with NOMEX® thread • Self-locking brass zipper with NOMEX® zipper tape NFPA 70E Arc Rating 7905 Navy 9.5 oz. - 11.5 PPE Category 2 NOMEX® Uniform Pants PA70- DuPont NOMEX® Aramid • Fabric weight 6 and 7.5 oz. ing entire length • Uniform style with permanent creases • Self-locking brass zipper with NO- • Hook and eye closure with french fly MEX® zipper tape • Bottoms of side pockets are rein- • Seven belt loops will take 2” belt forced using “X” bartack • Two welted hip pockets; left one has • Two inserted front pockets button and loop closure • NOMEX® ripstop pocketing • Sewn throughout with NOMEX® • Outseams are reinforced by topstitch- thread 5620 5605 Navy Med. Blue NFPA 70E Arc Rating 6.0 oz. - 5.7 7.5 oz. - 6.6 PPE Category 1 PRICING GUIDE AND CATALOG COMING SOON! PRICING GUIDE AND CATALOG COMING SOON! Flame Resistant Apparel NOMEX® EMS Glove Pocket Pant PP24- DuPont NOMEX® Aramid • Fabric weight 6 oz. cargo pocket measuring 7” X 8” with • Full cut pant for ease of motion and a 2” bellow. The cargo pocket fastens comfort with permanent creases both closed with a pocket flap and hook and front and back loop tape • Unique design glove/scissor pocket on • Two patch hip pockets on the rear which right leg. The pocket comprises a three fasten closed with a pocket flap and part scissor pocket on outside, a sep- hook and loop tape arate glove pocket in the center with a • Reinforced knees for enhanced dura- large 8 1/2” X 9” bellowed cargo pocket bility behind. The separate glove pocket in • Fully lined waistband the center measure 5 1/2” X 7 1/2” and • Two inserted front pockets ensures that surgical gloves can be • NOMEX® ripstop pocketing stored separately from other items. The • Self-locking brass zipper glove/scissor pocket fastens closed with • Seven belt loops a pocket flap and hook and loop tape. • Sewn throughout with NOMEX® thread • The left leg has a spacious bellowed NFPA 70E Arc Rating 5605 Navy 6.0 oz. - 5.7 PPE Category 1 Work Horse Twill Public Safety Pant PA27- 65% Polyester / 35% Cotton Comfort Twill • Fabric weight 7.75 oz. • Two welted hip pockets; left one has • Uniform style with with hook and eye button and loop closure closure with french fly • SNUG-TEX® shirt grip waistband • Self-locking brass zipper • Seven belt loops will take 2” belt • Two inserted front pockets 1110 Midnight PRICING GUIDE AND CATALOG COMING SOON! 800.901.4784 PinnacleTextile.com Flame Resistant Cargo Pant CP02-Flame Resistant 88% Cotton / 12% Nylon • Fabric weight 9 oz. • Seven belt loops will take 2” belt • Large cargo pocket on each leg with • Fully lined waistband with FR shirt flaps and hook and loop closure grip • High temperature nylon zipper with • Two welted hip pockets; left one has Aramid tape button and loop closure • Hook and eye waist closure with • FR pockets french fly • Sewn throughout with Aramid thread 22905 NFPA 70E Arc Rating 9.0 oz. - 14.0 Navy PPE Category 2 Flame Resistant Standard Pant CP01-Flame Resistant 88% Cotton / 12% Nylon • Fabric weight 9 oz. button and loop closure • Hook and eye waist closure with • Fully lined waistband with FR shirt french fly grip • High temperature nylon zipper with • FR pockets Aramid tape • Sewn throughout with Aramid thread • Seven belt loops will take 2” belt • Two welted hip pockets; left one has 22905 NFPA 70E Arc Rating 9.0 oz. - 14.0 Navy 22950 Tan PPE Category 2 PRICING GUIDE AND CATALOG COMING SOON!.
Load more

Recommended publications
  • 2021 Catalog
    2021 NEW PRODUCTS G-Power Flip and Punch Spin Bait Designed by Aaron Martens, Walleye anglers across the Midwest have become Gamakatsu has developed the dependent upon the spin style hooks for walleye rigs. new G-Power Heavy Cover Flip The Spin Bait hook can be rigged behind spinner & Punch Hook. A step up from blades, prop blades or used the G-Finesse Heavy Cover alone with just a simple Hook, for serious flipping and bead in front of them. It’s punching with heavy fluorocarbon and braid. The TGW (Tournament unique design incorporates Grade Wire) hook, paired with its welded eye, make this the strongest Gamakatsu swivels that is Heavy Cover hook in Gamakatsu’s G-Series lineup. Ideal for larger baits independent of the hook, giving the hook more freedom to spin while and weights, punching through grass mats and flipping into heavy reducing line twist. The Spin Bait hook features Nano Smooth Coat for timber. G-Power Flip and Punch ideally matches to all types of cover stealth presentations and unsurpassed hook penetration and the bait and able to withstand extreme conditions. Page 26 keeper barbs on the shank hold live and plastic baits on more securely. Page 48 G-Power Stinger Trailer Hook The new G-Power Stinger Trailer Hook Superline Offset Round Bend brilliance comes from Gamakatsu’s famous Gamakatsu’s Superline Offset Round B10S series of fly hooks and the expertise Bend is designed with a heavier of Professional Bass angler Aaron Martens. Superline wire best suited for heavy The Stinger Trailer has a strategically braided and fluorocarbon lines.
    [Show full text]
  • Buffalo Police All Season Jacket
    Uniforms, Transit Operators CP82007 Page 1 of 48 Specifications Appendix B ----------------------------------------------------------------------------------------------------------------------------- -------------------- 100. SF MUNI GORE-TEX JACKET & LINER – UNISEX STYLE NUMBER: Flying Cross by Fechheimer Item: 79900GTXA 10 STYLE: Waist length style with 6 snap storm flap overlapping a 2 way zipper. Side vents for access to equipment. Front and back flapped yokes to accommodate drop down panels. Utility shoulder straps. Hide-away hood. OUTER SHELL: 100% Nylon, 3 ply Supplex, 3.7 oz per sq. yd., with water and stain repellency, uncoated. COLOR: Black DROP LINING: Made from waterproof, breathable, windproof 2 layer Gore-Tex. Face fabric: 100% Black Polyester. Membrane layer: bi-component PTFE membrane. ====================================================================================== 101. REMOVABLE INSULATED LINER ENDURANCE INSULATED BASE LAYER JACKET SPECIFICATIONS STYLE NUMBER: Flying Cross by Fechheimer 55100A 10 (Black) The shell fabric shall be 100% Nylon with 37.5 padding insulation, 2.9 oz. per sq. yd. STYLE: The jacket shall be manufactured from new up-to-date pattern with an articulated sleeve, gusseted underarms and mandarin style collar. The jacket shall have two (2) upper napoleon pockets and two (2) lower vertical pockets with hidden zippers. There shall be (2) side zippers with adjustable snap closure. Sleeve cuff has partial Nylon Spandex for a comfort fit. Loops at back sleeve cuff seam and outside neck seam shall coordinate with snap tabs on related outerwear styles (). POCKET LINING SLEEVE LINING: The upper napoleon pocket lining shall extend from the hem to the chest and from the side seam to the front zipper edge. Pocket lining shall consist of a Taffeta material. The lining shall extend across the back yoke and down the top sleeve.
    [Show full text]
  • Elegant Table Runner H
    Elegant Table Runner Designed By Patty Peterson Featuring Kreinik Metallic Machine Sewing Threads Finished size 11.5" X 40.75" ave you ever wondered how you can use the decorative stitches on H your sewing machine? Well here’s a quick and easy project where you can combine your machine’s decorative stitches with beautiful metallic threads and make an absolutely elegant table accessory. Whether you make it for your own home or as a gift, this table runner project will help you see the possibilities of those decorative machine stitches in a whole new light! ! SUPPLY LIST: 1.!!! Kreinik Metallic Machine Sewing Threads (34 colors available). This project uses:! Fine Twist threads: 0001 SILVER, 0002 PEWTER, 0003 WHITE GOLD, 0006 ANTIQUE DK GOLD 2.!!! Kreinik Silver Metallized Gimp:! 0030 SILVER, 0032 ANTIQUE GOLD, 0033 BRASSY GOLD! 3.!!! Size 14 Topstitch needle 4.!!! Sewing or embroidery machine/combination 5.!!! Walking foot or dual feed foot to construct table runner 6.!!! Tear-away stabilizer (depending on your hoop size) 7.!!! Bobbin thread 8.!!! Scissors 9.!!! Kreinik Custom Corder!™ 10. !If you plan on embroidering out the stitches in your embroidery hoop you will need 3/4 yard of Kona Bay, Black cotton fabric !! 11. If you are sewing the decorative stitches you will need!1/2 yard Kona Bay, Black cotton fabric 12.! Background fabric 13" x 44" (WOF) width of fabric (our model uses light weight patterned nylon)! 13.! Backing fabric: Kona Bay, Black cotton 13" X 44" (WOF) 14. !Extra fabric to sew test stitches, such as a couple of 6" x 6" squares 15.
    [Show full text]
  • Sleeveless Blouse Tutorial by Marianne Jeffrey Adventurousquilter.Blogspot.Com
    Sleeveless Blouse Tutorial By Marianne Jeffrey Adventurousquilter.blogspot.com #sleevelessblousebyAQ Quick and easy to make! 1 Fabric Requirements This blouse tutorial has been written to suit any size; you take vital measurements and decide from several options offered. You will need up to: 2 yards of cotton fabric It is highly recommended you use cotton sateen as it drapes well. However you could use quilting cotton. I have found that a high quality yet lighter & softer quilting cotton such as some of those manufactured by Art Gallery Fabrics or M & S Textiles Australia drape well for use in cotton clothing. Harmony Art Organic Design has fabulous organic cotton sateen, you can buy it here: https://organiccottonplus.com/collections/prints-harmony-art Spoonflower also has a cotton sateen available in their range and offers a multitude delightful fabric designs by indie designers: https://www.spoonflower.com/ Rayon is another fabric option that drapes well but be sure to wash and dry before making the blouse to preshrink! Lightweight linen is also a great option or a linen/rayon blend! In dressmaking it is common for sewists to make a “wearable muslin” In simple terms a “muslin” involves making a ‘test’ garment from cheap fabric such as muslin to perfect the garment size, cut etc before using high quality fabrics for the final garment. A “wearable muslin” is made from cheaper quality fabric than your final garment, so that it is a wearable piece of clothing once it is complete! If you choose to do this you can shop the clearance aisle of large retailers such as Joann, Hobby Lobby, Walmart, Spotlight etc to buy cheap yardage for your test garment.
    [Show full text]
  • Please Note: Vendor Must Provide One Sample of a Gold Badge for Sheriff and One Sample of a Silver Badge for Deputy
    EL PASO COUNTY SHERIFF'S OFFICE DEPUTY BADGES C.W. Nielsen - Model #S-300 FINISH - Alloy either Alloy S or Alloy G depending on rank. BADGE is 3 inches point to point with floral design in each tip. Badge has a 1/4" dap and is struck from .064 material. LETTERING around badge circle is blue block: Deputy Sheriff (seal) El Paso County Lettering is separated by dot break points. The seal is a full color State of Texas seal 7/8" diameter with red rim blue center area and white star. A top the bade and straddling the top two tips is the title banner. It is affixed 1/8" above the top circle of the badge. The title banner is 5/6" wide. The titles are standing Roman letters in a field of blue enamel. All blue enamel colors are #643 blue. Attachments are B.A. Ballou #105 joint #68 catch with 2" foot pin. Gold Badges for the following officers: Sheriff Chief Deputy Commander Detective Lieutenant Sergeant Silver Badge for Deputy Please Note: Vendor must provide one sample of a Gold badge for Sheriff and one sample of a silver badge for Deputy. 5 EL PASO COUNTY SHERIFF’S OFFICE DETENTION OFFICER BADGE Badge Body Specifications: Diameter 72.4 mm or 2.82 inches Thickness 3.5 mm or .13 inches Material Brass Metal Plating TBD Silver for Detention Officer and Gold for Corporal and above Curvature 10 mm convex Fixture Vertical Safety Pin 2” Style Clasp (Welded) Enamel Genuine Cloisonne hard enamel lettering and state seal State Seal 3 D Rank Ribbon Specifications: Dimensions Approximately 50.46 X 18.46 mm “TBD upon final artwork Thickness 2mm Materials Brass Plating To match badge body determined by rank Lettering Genuine Cloisonne hard enamel lettering Bureau Ribbon Specifications: Dimensions Approximately 50.46 X 18.46 mm TBD upon final artwork approval Thickness 2 mm Material Brass Plating To match badge body DETENTION BUREAU Lettering Genuine Cloisonne hard enamel lettering All die charges one time only fee as long as there are no changes to the physical design.
    [Show full text]
  • Fiber-Level On-The-Fly Procedural Textiles
    Eurographics Symposium on Rendering 2017 Volume 36 (2017), Number 4 P. Sander and M. Zwicker (Guest Editors) Fiber-Level On-the-Fly Procedural Textiles Fujun Luan1 Shuang Zhao2 Kavita Bala1 1Cornell University 2University of California, Irvine 10× 100× 400× 10× 100× 200× Figure 1: The new Sponza scene by Crytek with 12 procedural textile models substituted for the fabrics. These models together represent 33 thousand yarns, composed of 8 million procedurally described fibers. Insets on the right show zoomed versions of two subregions (indicated with white rectangles), demonstrating the level of fidelity and detail offered by these models. When fully realized, all the cloth models would take 867 GB of storage, and are practically unrenderable. We introduce a realization-minimizing technique to render such large-scale procedural textiles on a single computer. Abstract Procedural textile models are compact, easy to edit, and can achieve state-of-the-art realism with fiber-level details. However, these complex models generally need to be fully instantiated (aka. realized) into 3D volumes or fiber meshes and stored in memory, We introduce a novel realization-minimizing technique that enables physically based rendering of procedural textiles, without the need of full model realizations. The key ingredients of our technique are new data structures and search algorithms that look up regular and flyaway fibers on the fly, efficiently and consistently. Our technique works with compact fiber-level procedural yarn models in their exact form with no approximation imposed. In practice, our method can render very large models that are practically unrenderable using existing methods, while using considerably less memory (60–200× less) and achieving good performance.
    [Show full text]
  • Simplified Sewing: Hems
    South Dakota State University Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange SDSU Extension Fact Sheets SDSU Extension 1964 Simplified Sewing: Hems Cooperative Extension South Dakota State University Follow this and additional works at: https://openprairie.sdstate.edu/extension_fact Recommended Citation South Dakota State University, Cooperative Extension, "Simplified Sewing: Hems" (1964). SDSU Extension Fact Sheets. 865. https://openprairie.sdstate.edu/extension_fact/865 This Fact Sheet is brought to you for free and open access by the SDSU Extension at Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange. It has been accepted for inclusion in SDSU Extension Fact Sheets by an authorized administrator of Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange. For more information, please contact [email protected]. .. ... -~--- - --v · . --,-.-.- , -. ·. ..•, .. ·'··· .••,.,. - .t:\. --(. ......., • ... ·\•i• ....,.,•-•1•,··...- .,.. "\' ·,- • • • -:\. -: ·):.~\:,..,:}:,:.·,:,..,:;:,:.~:,-:-,:.0:.- ·,~\:,.!;;;; ··:,:.\!.t:,-;..:,t;.,:,:,:.i:1:,:.'.:.•; .-·F_:,~::::_:.~:~~~~~;.:::z~:;:'.·---~-~;:~~L ::·.1~~~~1::.:;.:_;~~: File Copy FS244 THE l-lE~I of your dress can have the "professional - Wearer should stand in a natural position with look" or the "homemade look." In general, the best arms at sides and weight on both feet. hem is the least conspicuous, and every step in making a hem is planned with this in mind There are several methods of marking a hem. You may use any one of these: The professional touch is recognize-cl by the follow- ing characteristics: Various types of chalk markers or pin markers - Inconspicuous from the right side Yardstick - Even distance from the floor Tailor's square. - Wide enough for good proportion and to gi\.re With some of these you can mark enough weight to hang well your own hem; others require a - Even in width help«.
    [Show full text]
  • To Complete the Pattern Join Bodice #1 to #2 at Circle Front Bodice #1
    To complete the pattern join bodice #1 to #2 at circle Chapter 2 Chapter 4 Chapter 6 Chapter 19 Front Bodice #1 1/2” FACING N CUT 1 FABRIC ON FOLD CUT 2 WITH FACING CUT 2 EXTENSIO INTERFACING USE FOR: GRAINLINE LAYOUT CUTTING FABRIC PATTERN MARKINGS DARTS SEAMS COLLARS CLOSURES CENTER FRONT FOLD To completeTo the pattern join bodice #1 to #2 at circle TO COMPLETE THE PATTERN JOIN BODICE #1 TO #2 AT CIRCLE STITCH TO MATCHPOINTS FOR DART TUCK FRONT BODICE #2 Front Bodice #2 Chapter 2 Chapter 4 Chapter 6 Chapter 19 STITCH TO MATCHPOINTS FOR DART TUCKS To complete the pattern join bodice #3 to #4 at circle Chapter 2 Chapter 4 Chapter 6 Back Bodice #3 CUT 2 FABRIC USE FOR: CK SEAM GRAINLINE LAYOUT CUTTING FABRIC CK FOLD PATTERN MARKINGS DARTS SEAMS COLLARS CENTER BA CUT HERE FOR CENTER BA To completeTo the pattern join bodice #3 to #4 at circle STITCH TO MATCHPOINTS FOR DART TUCKS Back Bodice #4 Chapter 2 Chapter 4 Chapter 6 Chapter 4 Chapter 11 Chapter 14 Chapter 17 MATCHPOINT Front Skirt #5 CUT 1 FABRIC USE FOR: V SHAPED SEAM WAISTBAND WAIST FACING BIAS WAIST FINISH CURVED/ALINE HEM BIAS FALSE HEM CENTER FRONT FOLD Chapter 4 Chapter 11 Chapter 14 Front Yoke #6 CUT 1 FABRIC CUT 1 INTERFACING USE FOR: V SHAPE SEAM WAISTBAND WAIST FACING BIAS WAIST FINISH C. F. FOLD C. F. MATCHPOINT Chapter 4 Chapter 6 Chapter 10 Chapter 11 Chapter 14 Chapter 17 MARK DART POINT HERE Back Skirt #7 CUT 2 FABRIC USE FOR: SEAMS ZIPPERS WAISTBAND WAIST FACING BIAS WAIST FINISH CURVED ALINE HEM BIAS FALSE HEM Chapter 4 CUT ON FOLD Chapter 12 Chapter 17 H TC NO WHEN
    [Show full text]
  • Taking Shape DARTS ADD SHAPE TURNING a FLAT PIECE of FABRIC INTO a THREE-DIMENSIONAL FORM to MATCH the CONTOURS of the BODY LINDA TURNER GRIEPENTROG
    Techniques Taking Shape DARTS ADD SHAPE TURNING A FLAT PIECE OF FABRIC INTO A THREE-DIMENSIONAL FORM TO MATCH THE CONTOURS OF THE BODY LINDA TURNER GRIEPENTROG ustline, hip, waistline to tummy, elbow and shoulder. Darts can be horizontal, vertical or anywhere in between, straight or curved, but the stitching principles are the same. BThe goal of quality dart stitching is smooth, pucker-free points that don’t call attention to themselves. SHAPING A single-point dart is shaped like a triangle, and when stitched it takes a wedge of fabric out of the garment allowing for controlled fullness at the point. A single dart may be on the lengthwise fabric grain, angled or slightly curved. (1) A double-point or contour dart is diamond or rugby ball shaped, and is used to shape the waistline, leaving fullness at both ends for the bust and hip. (2) A French dart is a curved shape from the garment side seam to the bustline. This dart has cut edges joined like a seam. (3) V9082 Vintage Vogue, 1960. Misses’ A5(6-8-10-12-14) E5(14-16-18-20-22). Sew Rating: Average. Price code Orange. Illustrations: Theresa O’Connell Theresa Illustrations: 1 2 3 26 SEW TODAY May/June 2019 MARKING to anchor the stitches. Stitch (7) and stitch toward the point, Darts are indicated on the along the line, removing the A third technique for dart then repeat for the other pattern tissue by either solid pins as you get to them. Taper point, slightly overlapping or dashed lines and a dot the stitching to the point the beginning stitching lines at the point.
    [Show full text]
  • Almost Amish Apron, Children's Size
    Almost Amish Apron, Children’s Size 7 ½” Selvages 1/2” Pocket 7 ½ ” Ruffle Ruffle Tie (makes 2) 17” waistband Body of Apron (cut 1) 11 ” Fold 3 ¾” 3 ¾” 3 ¾ ” 4 ½ ” 13” 1/2 yd red fabric for ruffles, ties, waistband, and pocket 3/8 yd floral fabric for body of apron (makes 2) 1. Make ties by sewing right sides together then turning right side out. 2. Form ruffle by sewing two pieces together to form one long piece, fold in half length-wise with wrong sides together, run gathering stitch (long machine stitch) with raw edges together. 3. Apply ruffle to side and bottom edges of apron, gathering up the ruffle to fit and discarding extra ruffle. 4. Prepare pocket and topstitch onto apron. Sew on button. 5. With right sides together stitch waistband to top edge of apron, folding ends of waistband under to be even with edge of ruffle. Fold waistband to inside and pin barely over seam. On right side of apron, topstitch waistband near seam line. 6. Insert ties into ends of waistband and stitch across. Almost Amish Apron, Detailed Instructions 1. Fabric amounts and cutting of pieces are shown below. 9” Selvages Pocket 9” Ruffle Ruffle Tie Tie 22” waistband Body of Apron (cut 1) 13 ¼” Fold 4” 4” 4 ¾ ” 4 ¾ ” 5” 19” 3/4 yd red fabric for ruffles, ties, waistband, and pocket 5/8 yd floral fabric for body of apron 2. Fold tie in half length-wise right sides together and press. Stitch long edge and one short edge 1/2” from raw edge.
    [Show full text]
  • Instructions and Free Patterns
    Instructions and free patterns www.mybernette.com “Romantic style” project sewing instructions Frilly blouse Sizes 3434––––4242 European (4(4(4-(4 ---1212 US/6US/6----1414 UK) You'll need - 1.2m (1 3/8 yd) pink taffeta (fabric width 1.5m (5')) - 0.45m (½ yd) white tulle (fabric width 1.5m (5')) - 0.50 m (1/2 yd) pink voile (fabric width 1.5m (5')) - 1.5m (1 2/3 yd) satin ribbon, approx. 4mm (1/6") wide - Assorted sewing and embroidery threads in pink - Embroidery stabilizer for the facing - Spray adhesive - Sewing thread to match the color of the fabric - Gathering foot - Cording foot Fabric rerecommendationcommendation Taffeta or other shiny, slightly crisp fabric for the blouse. Sheer fabrics that can be gathered with the gathering foot for the frills. Good to know The decorative stitches will cause the fabric to shrink slightly, so be sure to add 2.5cm (1") seam allowance to the outer facing when cutting it out. After embellishing the facing with decorative stitching, reposition the paper pattern on the stitched fabric and trim the seam allowance to 1.5cm (5/8"). Cutting out Seam allowanceallowancess ––– When cutting out, add 1.5cm (5/8") seam allowance to all edges and the hem, and 1cm (3/8") to armhole curves. Pink taffeta 2 x front 1 x back to fabric fold 2 x facing 2 x belt loops: 1.5cm x 8cm (5/8" x 3 ¼"), including seam allowance 1 x belt: 8cm x 66cm (3 ¼" x 26"), including seam allowance 2 x bias binding for armhole, cut on cross-grain: 4cm x 47cm (1 5/8" x 18 1/2") Sheer voile, taffetataffeta,,,, or tulle Tear or cut (depending on the fabric's texture) 2cm- (7/8"-) wide strips for the frill on the facing.
    [Show full text]
  • Sewing Math: How to Add, Subtract, Multiply & Divide
    PAGE 8 KITCHEN-KLATTER MAGAZINE, SEPTEMBER, 1974 it's gathered and full, the best proce­ dure is to sew the skirt to the bottom of the bodice and add an attractive purchased belt. If it's fairly straight or A-line, you can do that, or you can set SEWING MATH: it on flat and neat to the knit bodice, turn the seam upward (again toward the HOW TO ADD, knit) and topstitch. It's entirely possi­ SUBTRACT, ble, if your girl needs even more MULTIPLY & DIVIDE length, to cut the knit bodice long enough for a dropped waistline; then by Mary Feese the "new" dress can be worn with or without a belt, as its wearer prefers. As you re-use fabrics, you'll find buttons, zippers, and some trim that you don't need for the project in hand, yet that are too good to throw away. You look at that title and wonder, figures, the problems are somewhat Save them! Small buttons store well in "What on earth does that mean?" Well, different. Anything that fits this month pill bottles; larger ones can be put simply this: you can add, subtract, may not do so next month! Let's say into plastic sandwich bags to keep multiply, and divide with items of she has a good dress, whose fabric is them together, yet easily visible. To clothing your family already owns. Re­ well worth redoing - but there's just re-use zippers and various trims, take cycle, alter, remake, restyle, hand no room in the bustline. The "tank the time to spray-starch and press them down, freshen up - and come out with top" idea can solve this one.
    [Show full text]