Industrial Pumps

INDUSTRIAL PUMPS

General Catalogue Contents

Who we are p. 04 Electric centrifugal pumps Why choose us p. 06 DM - Line introduction p. 74 Global network p. 08 DM 06 p. 76 Our products p. 10 DM 10 p. 77 The main application sectors p. 11 DM 15 p. 78 Conformity p. 14 DM 30 p. 79 Main advantages p. 16 KM 70 p. 80 Patented exchanger p. 18 MB - Line introduction p. 82 Long life diaphragms p. 19 MB 80 p. 83 How does it work? p. 20 MB 100 p. 84 Installations p. 21 MB 110 p. 85 MB 120 p. 86 Air-operated double diaphragm pumps MB 130 p. 87 CUBIC - Line introduction p. 22 MB 140 p. 88 CUBIC MIDGETBOX p. 23 MB 150 p. 89 CUBIC 15 p. 24 MB 155 p. 90 BOXER - Line introduction p. 26 MB 160 p. 91 BOXER 7 p. 27 MB 180 p. 92 BOXER 15 p. 28 IM - Line introduction p. 94 MICROBOXER p. 30 IM 80 p. 95 BOXER 50 / MINIBOXER p. 32 IM 90 p. 96 BOXER 81 / BOXER 90 p. 34 IM 95 p. 97 BOXER 100 p. 36 IM 110 p. 98 BOXER 150 p. 38 IM 120 p. 99 BOXER 251 / BOXER 252 p. 40 IM 130 p. 100 BOXER 522 / BOXER 502 p. 42 IM 140 p. 101 BOXER 503 p. 44 IM 150 p. 102 BOXER FPC 100 p. 46 IM 155 p. 103 RC Remote Control p. 50 IM 160 p. 104 SCUBIC p. 51 IM 180 p. 105 SMICRO p. 52 IM 200 p. 106 SBOXER 50 / SMINI p. 54 SBOXER 100 p. 56 Drum transfer pumps TR - Line introduction p. 110 FULLFLOW 502 p. 58

Chemical compatibility p. 62 Online configurator p. 63 Accessories p. 114 Technical specifications p. 64 Pump protection basket strainer p. 118 Mixers and peristaltic p. 119 Pulsation dampers EQUAFLUX - Line introduction p. 66 Web and contacts p. 122 EQUAFLUX 51 p. 67 EQUAFLUX 100 p. 68 EQUAFLUX 200 p. 69 EQUAFLUX 302 p. 70 EQUAFLUX 303 p. 71 General Catalogue - Rev.05/19 Catalogue General 3 Who we are

Debem's technical office, alongside the research and is quite unusual for a small company, but something development department, is constantly developing that has certainly borne its fruits. Initially introduced new projects and innovating current products. Our to improve our existing products (by researching the primary objective of customer satisfaction has led to use of new materials, rationalising the spaces used, the development of a modular design of the pumps, optimising the existing technology) and reducing costs which allows for tailor-made and custom assemblies without affecting the already high quality standards, THE COMPANY with components and materials that are ideally suited the research project has allowed us to develop highly for their use. One of our company's strengths is the innovative products, such as the BOXER and CUBIC development of our in-house R&D department, which series, which represent the pinnacle of our research.

CERTIFICATIONS

Debem has been active in the liquid transfer sector and the current large warehouse. Debem offers its for over 30 years. customers new and effective services, providing them ATEX: A cutting edge company, specialised in pumps for with technical and commercial information to make it All the BOXER air operated pumps are ATEX certified and are numerous industries and for highly demanding easier to choose the most suitable product and meet explosion proof protected, in compliance with the directive environments. every operating requirement. 2014/34/EU and the harmonised European standards EN- DEBEM Our close collaboration with the end user and our 60079-10 and EN 1127-1. has decided customer's feedback have been the key factors of the Our customers can count on a call centre able to to use company's philosophy. We have developed a virtuous resolve questions tied to product selection and 100% system of research and development of the product the most suitable chemical compatibility for their IECEx: Zero Impact® and service, which has garnered growing appreciation requirements. The BOXER air operated pumps are IECEx certified and are certified from leading companies in different sectors. Moreover we also provide a technical support service explosion proof protected, in compliance with the international renewable energy. that can respond to any queries of a technical nature, IECEx standards and the standards Debem's impressive growth is reflected in the about the installation, pump optimisation, system or IEC 60079-10 and EN 1127-1. difference between the original small premises about the fluid pumping process. The BOXER air operated pumps are produced in compliance with IECEx, with class Ex h IIB T4 Gb and Ex h IIIB T135° Db for uses in the presence of flammable gases and dust.

DEBEM: TRADITION AND INNOVATION ISO 9001:2015 certification

Debem Srl traces its the textile industry. At the distributor. roots to 1975, when the time the latter was This design is still in use its founder, Marco De particularly successful in Debem's air-operated Bernardi, thanks to the in Italy and Varese was double diaphragm theoretical and practical in many ways its beating pumps and has even experience garnered heart. been copied by various in the field, decided As the demand for Italian and international to tackle his first pumps continued competitors. independent project: growing, Debem an industrial pump increased its product The new design, utterly and in particular a 1.5 range, always striving unique for the time, HP plastic centrifugal to be ahead of the times met with immediate pump. The prototype and looking for new and extensive success. was an immediate solutions to overcome This triggered an Pumps for the success, so much so the difficulties of the exponential growth that he decided to risk production process. The that over the years chemical, textile, everything and go it continuous technical confirmed Debem's alone, creating his own research and industrial role as one of Italy's food, graphic, leather, line of industrial pumps. innovation led to the points of excellence The main sectors that first patent in 1987, in the production of ceramic, electronic, he focused on were which covered the pumps, and especially galvanic, paint, oil and Debem, 1980 the chemical industry, engineering study of the air-operated double in all its variants, and air-operated system of diaphragm pumps. sanitary industry.

4 5 Why choose us

Innovative and Our strengths technologically The structure advanced Choosing DEBEM means putting your pumps built with THE COMPANY trust in a company driven by passion Technical that has built a business based on materials and values, tradition, innovation, people, office experience and professionalism. components resistant Sales to aggressive conditions office A total of 2500 m2 History of covered surface Executive Over 30 years of innovation, research, quality and excellence. and administrative office

Made in Italy Patents The products are entirely designed, patented and built in Italy by Debem.

International distribution Debem's products can count on an extensive global distribution (see network).

Materials and Technologies Debem's products are constructed with the finest quality, certified Italian materials. We use the latest generation technologies in line with the industry 4.0 standards.

Service and consultancy A call centre able to resolve questions tied to product selection and the most suitable chemical compatibility for their requirements. Support service that responds to technical, installation and pump optimisation queries. Production Assembly department department Warehouse Custom solutions Debem's air-operated double diaphragm pumps can be customised based on the customer's requirements and application needs.

Research&Development - Innovation Test Lab Debem's technical office, alongside the research and development department, is constantly developing new projects and innovating current products. We are very happy to present the new DEBEM TEST- LAB, an internal analysis and product refinement laboratory. Open to the public for technical courses Optimal emergency management and certified tests for customers, it is Italy's first IECEx Extremely quick deliveries of finished products and of spare parts for every pump model inthe certified laboratory for air-operated pumps. Consisting catalogue. of a 4000-litre polypropylene anti-cavitation tank with a compartmentalised structure, the TEST-LAB features two air lines to supply the pumps up to 6000 NL/min and Quality three fluid lines to provide up to 3000 L/min. The technical All the products that leave the company are stamped with a code that includes the production data equipment includes digital instruments certified to entered into a database, to ensure utmost quality through every stage of the production process. analyse air consumption, flow rate and hydraulic head, with a centralised data collection and graphics for issuing test certificates.

6 7 Global network

EUROPE: THE COMPANY

• AUSTRIA • BELGIUM • BELARUS • BULGARIA • CYPRUS • DENMARK • FRANCE • GEORGIA • GERMANY • UNITED KINGDOM • GREECE • IRELAND • ITALY • LITHUANIA NORTH • NORWAY AND CENTRAL • NETHERLANDS AMERICA • POLAND • PORTUGAL • MEXICO • CZECH REPUBLIC • PANAMA • ROMANIA • USA • RUSSIA • SPAIN • SWEDEN • SWITZERLAND • TURKEY • HUNGARY MIDDLE EAST: • UKRAINE

• SAUDI ARABIA NORTHERN • BAHRAIN AFRICA: • UNITED ARAB EMIRATES • ISRAEL • ALGERIA • OMAN • EGYPT • QATAR • MOROCCO • SYRIA • TUNISIA

SOUTH AMERICA:

• ARGENTINA • BRAZIL ASIA: • CHILE • COLUMBIA • CHINA • ECUADOR • KOREA • PERU SOUTHERN • INDIA • VENEZUELA AFRICA: • INDONESIA OCEANIA: • MALAYSIA • SOUTH AFRICA • SINGAPORE • AUSTRALIA • TAIWAN • THAILAND • VIETNAM 8 9 Our products

Air-operated double diaphragm pumps THE MAIN APPLICATION SECTORS

Our air-operated diaphragm pumps are sturdy and powerful, self-priming (dry negative vacuum), also in demanding conditions. They can transfer liquids with high viscosity and/or with suspended CUBIC BOXER REMOTE FULLFLOW solids. CONTROL SECTORS AND APPLICATION PRODUCTS

Pulsation dampers AUTOMOTIVE CERAMIC, STONE, MARBLE, GALVANIC AND ELECTRONIC GLASS AND MINING INDUSTRY INDUSTRY

Automatic diaphragm pulsation dampers. Compressed air-driven devices that are installed on the delivery side of air-operated pumps. They minimise the pulsations of the fluid and the consequent EQUAFLUX vibrations, or water hammer, to protect GRAPHIC TEXTILE AND LEATHER PRODUCTION AND STORAGE the process equipment. INDUSTRY INDUSTRY OF BIODIESEL

Electric centrifugal pumps

CHEMICAL PACKING, GLUE, MECHANICAL AND INDUSTRY PAPER AND PAPER MILLS METALLURGIC INDUSTRY

DM KM MB IM HORIZONTAL HORIZONTAL HORIZONTAL VERTICAL MAGNETIC DRIVE MAGNETIC DRIVE WITH MECHANICAL CENTRIFUGAL PUMPS SEALS

Resin centrifugal pumps with horizon- WATER AND SLUDGE PAINT tal axis mechanical seal, with magnetic TREATMENT INDUSTRY OIL & GAS drive and vertical axis centrifugal pumps.

Drum transfer pumps

GOLD PROCESSING Compressed air or electrical motor INDUSTRY TR driven drum transfer pumps, with the DRUM TRANSFER motor installed in direct drive or with PUMPS Compressed air motor a drive coupling. Their portable design renders them ideally suited to quickly Electric motor transfer clean corrosive liquids from drums.

10 11 12 13 Conformity

ATEX CONFORMITY IECEx CONFORMITY

All the BOXER air operated pumps are ATEX certified and are explosion proof protected, in compliance All the BOXER air operated pumps are IECEx certified and are explosion proof protected, in compliance CONFORMITY with the directive 2014/34/EU and the harmonised European standards EN-60079-10 and EN 1127-1. with the international IECEx standards in compliance with standards EN-60079-10 and EN 1127-1. They are constructed in compliance with ATEX II 3 G Ex h IIB T4 Gb and II 3 D Ex h IIIB The BOXER air operated pumps are constructed in the CONDUCT version, in compliance with lECEx, with class Ex h IIB T4 Gb and Ex h IIIB T135° Db. T135° Db for use in “Zone 2- Zone 22” (in the presence of flammable gases and dust). On specific request during the order, the pumps can be supplied in CONDUCT version in compliance ATTENTION The identification plate of the pump includes the IECEx marking and the equipment category. Before the with ATEX II 2 G Ex h IIB T4 Gb and II 2 D Ex h IIIB T135° Db for use in “Zone 1 - Zone 21”. installation always check the compliance with the classification of the installation "zone". The ATTENTION equipment user is responsible for classifying their installation zone. The identification plate of the pump includes the ATEX marking and the equipment category. Before the The IECEx compliant pumps are not available with Hytrel components and do not have a installation always check the compliance with the classification of the installation "zone". The different usage specification in relation to the ambient temperature indicated on the plate. equipment user is responsible for classifying their installation zone. See below for the definition of the IECEx marking of each execution. See below for the definition of the ATEX marking of each execution.

I M2 Ex h * * * ... * * * Ex * * * * Equipment protection level: IECEx Equipment protection level: Gb = protection level b x Gas marking CE marking Protection mode: Gb = protection level b x Gas Db = protection level b x Dust see list below. Db = protection level b x Dust Identification Number in compliance with standard EN 80079-37 of the notified body in compliance with standard EN 80079- 37 Use of the equipment in potentially explosive atmosphere Temperature Class Temperature Class Equipment Equipment Gas group: Gas group: (group ll): (group II): group for group: I = Mining (Methane) I = Mining (Methane) Maximum Equipment Equipment Type of Maximum surface: II = Surface industries II = Surface industries surface group for group: explosive surface IIA = *Propane, etc. IIA = *Propane, etc. = Mining M1 = very high temperature surface: atmosphere (II temperature I IIB = *Ethylene, etc. unit): IIB = *Ethylene, etc. protection Class [°C] IIC = *Hydrogen, Class [°C] M2 = high IIC = *Hydrogen, I = Mining M1 = very high G D T1 = 450 *Acetylene etc. T1 = 450 protection *Acetylene etc. protection T2 = 300 Gas Dust T2 = 300 M2 = high * Example of representative explosive * Example of representative explosive T3 = 200 vapou T3 = 200 protection gases. gases. T4 = 135 rs = 135 T4 T5 = 100 Dust group: T5 = 100 Dust group: 1 = very high protection T5 = 85 II = Surfaces 0 20 T5 = 85 IIIA = *Combustible volatile, etc. 2 = high protection IIIA = *Combustible volatile, etc. Reference temperature Reference temperature IIIB = *Non-conductive dust, etc. 3 = normal protection IIIB = *Non-conductive dust, etc. 1 21 = *Conductive dust, etc. ambient minus 5°C ÷ 60°C. IIIC = *Conductive dust, etc. ambient minus 5°C ÷ 60°C. IIIC * Example of representative explosive For the dust class 2 22 * Example of representative explosive For the dust class dust. dust. the letter “T” the letter “T” is followed by the maximum is followed by the maximum surface temperature: e.g. surface temperature: e.g. T100°C. T100°C. Ex h : equipment in protection mode «c», «b», or «k», in agreement with standard EN 80079-37. IIB : except for the following gases: hydrogen, acetylene, carbon sulphide. : safety symbol in agreement with DIN 40012 appendix A. IIIB : except for the following dust: conductive dust II3G/II3D : surface equipment for use in zones where the presence of combustible gases, fumes or fogs, as well as dust, in the air is improbable or rare and for short periods, during the operation in the external and T4/T135°C : temperature class admitted. The user must process fluids in temperature in compliance with this internal zone (Zone 2 - Zone 22). classification, taking into account the indications of this manual and the applicable legislative II2G/II2D: surface equipment for use in zones with the occasional presence of combustible gases, fumes or requirements. The user must also take into account the explosive temperature of the combustible fogs, as well as dust, in the air during the normal operation (EN 1127-1 par. 6.3), in the external and gases, fumes, fog or dust in the air present in the zone of use. internal zone (Zone 1- Zone 21). The technical file is deposited with the certifying body lEC EUROFlNS (Certificate EX-3935). Ex h : equipment in protection mode «c», or «b», or «k», in agreement with standard EN 80079-37. IIB : except for the following gases: hydrogen, acetylene, carbon sulphide. IIIB : except for the following dust: conductive dust T4/T135°C : temperature class admitted. The user must process fluids in temperature in compliance with this classification, taking into account the indications of this manual and the applicable legislative requirements. The user must also take into account the explosive temperature of the combustible gases, fumes, fog or dust in the air present in the zone of use. The technical file is deposited with the certifying body, TÜV NORD CERT in Hanover.

14 15 Main advantages BOXER DIAPHRAGM PUMPS AND CUBIC DIAPHRAGM MINI PUMPS

The CUBIC diaphragm mini pumps and the BOXER di- speed without losses of pressure as well as the pos- PLASTIC BOXER aphragm pumps feature high levels of performance. sibility of empty-running without suffering damage. Their considerable power and sturdiness render them The vast range of construction materials allows us to • ATEX ZONE 1 - AVAILABLE ON REQUEST ideal for pumping highly viscous liquids, even with select the best chemical compatibility with the fluid II 2G Ex h IIb T4 Gb suspended solids The pneumatic stall-prevention cir- and/or the environment, without neglecting the oper- II 2D Ex h IIIB T135°C Db X cuit guarantees a safe operation, without requiring lu- ating temperature range. Their construction principle Ex h IIB T4 Gb bricated air. makes them ideally suited for demanding applica-

Ex h IIIB T135°C Db MAIN ADVANTAGES These pumps have achieved unprecedented levels of tions with high levels of humidity or in potentially ex- • ATEX ZONE 2 - STANDARD ON ALL MODELS versatility due to their dry self-priming capacity with a plosive atmospheres (ATEX and IECEx certification). II 3G Ex h IIB T4 Gc considerable suction head, the ability to fine-tune the II 3D Ex h IIIB T135°C Dc X I M2 Ex h I Mb X Constructed in PP, PP+CF, PVDF, ECTFE, PTFE, ALUMINIUM, AISI 316 STAINLESS STEEL, AISI 316 L STAINLESS STEEL IECEx Use in explosive atmospheres (ATEX certification zone 1 – 2, IECEx certification) Suitable for demanding applications and in atmospheres with high levels of humidity The plastic BOXER range is designed for demanding uses, for very aggressive and acid liquids, in the numerous applications of the chemical industry. Dry-running MATERIALS PP, PP+CF, PVDF, ECTFE, PTFE Dry self-priming Max dry suction 5m Supply with non-lubricated air Patented stall-prevention pneumatic circuit Adjustable flow rate and head METAL BOXER

Fine adjustment of the speed at constant pressure • ATEX ZONE 1 - AVAILABLE ON REQUEST Possibility of split manifolds (two suctions and two deliveries) II 2G Ex h IIb T4 Gb II 2D Ex h IIIB T135°C Db X Bench or ceiling installation Ex h IIB T4 Gb Ex h IIIB T135°C Db Customisable positions • ATEX ZONE 2 - STANDARD ON ALL MODELS Easy maintenance and parts replacement II 3G Ex h IIB T4 Gc II 3D Ex h IIIB T135°C Dc X Excellent ratio between performance and costs I M2 Ex h I Mb X Operating temperature: IECEx - PP / PP+CF from +3°C to +65°C The metal BOXER range is designed for demanding uses, - PVDF / ECTFE from +3°C to +95°C for solvent-based liquids and for numerous uses in the paint industry. - AISI 316 / AISI 316 L / Aluminium from +3°C to 95°C MATERIALS ALUMINIUM, AISI 316 STAINLESS STEEL, AISI 316 L STAINLESS STEEL Max dry suction 5m

CUBIC

A • ATEX ZONE 1 - AVAILABLE ON REQUEST II 2G Ex h IIb T4 Gb B II 2D Ex h IIIB T135°C Db X A = ball valves • ATEX ZONE 2 - STANDARD ON ALL MODELS B = pumping chamber C1 II 3G Ex h IIB T4 Gc C1 = product-side diaphragm II 3D Ex h IIIB T135°C Dc X C2 = air-side diaphragm C2 D = suction manifold E = delivery manifold F = pneumatic exchanger D This range of pumps, with their unique design and compact dimensions, can be used in series in small spaces. E MATERIALS PP, PP+CF, ECTFE F Max dry suction 3m 16 17 Patented exchanger Long life diaphragms

The diaphragms are the parts subjected to the greatest stresses during suction and pumping, whilst also having to resist the PATENTED STALL-PREVENTION COAXIAL PNEUMATIC EXCHANGER chemical attack and temperature of the liquid and the mechanical fatigue. Their correct assessment and selection is therefore of fundamental importance for the life of the diaphragm, as well as for the investment decisions and maintenance costs. A modern design process, destructing testing, as well as an in-depth analysis of the results have allowed Debem to develop the Debem pumps use a patented stall-prevention is built entirely with plastic parts (except for the shaft new generation LONG LIFE diaphragms. Thanks to their profile and construction shape, these products offer a larger working coaxial pneumatic exchanger. This device introduces connecting the two diaphragms), rendering it resistant surface and improved redistribution of the load, reducing the stress and yield of the material to a minimum. compressed air to change the equilibrium of to corrosive fluids and fumes. the pressure of the diaphragms, assisted by a BOXER / CUBIC FAMILY stall-prevention circuit, that guarantees optimal The Debem exchanger is pre-lubricated, therefore the performance, even in the most critical conditions. The supply air for the pump does not require lubrication, RUBBER DIAPHRAGMS control part (spool) and the power part (exchanger) are quite the opposite, it must be dried and free of PATENT AND DIAPHRAGMS EXCHANGER both housed inside the pump in a single block, which impurities, such as oil, dust or condensation. Debem's They are produced with rubber mixtures and special limits further losses of load when compressed air pneumatic exchanger (unique in its kind) is built with additives that improve their chemical characteristics as well flows in the pump. The Debem pneumatic exchanger is an extremely low number of parts, making parts as their mechanical flexural and resistance characteristics. easy to repair and/or replace. The internal exchanger replacement and maintenance extremely easy. These diaphragms have a nylon cloth reinforcement that improves stress distribution.

NBR Inexpensive and particularly suited for petroleum-based liquids, oil and abrasive fluids. Low cost of spare parts (single or kit) Easy installation EPDM Good resistance to acids, alkaline and abrasion as well as a Self-lubricated system NBR EPDM good flexibility also at low temperatures. No metal parts (only the shaft) BOXER FAMILY Stall-prevention system Long life of the device: more than 50,000,000 cycles THERMOPLASTIC DIAPHRAGMS

Made with thermoplastic polymers, these diaphragms provide a high level of mechanical resistance and stress Amongst the lowest air consumptions distribution. on the market HYTREL® Exceptionally tough and elastic return: a high resistance The air consumption data certain misleading advertising to impact, flex fatigue and creep: excellent flexibility at low (expressed in NL/minute) of would have you believe that temperatures and at high temperatures it maintains most Debem's pumps are real and this is a production standard. of its properties. It is also resistant to the attack of many checked, with certified state Be suspicious of all companies industrial chemicals, oils and solvents. of the art instruments and are that claim technical data amongst the lowest available without having the instruments SANTOPRENE® on the market today. Debem's necessary to determine their HYTREL SANTOPRENE® Excellent resistance to acid and alkaline fluids, high flexural pumps have been specifically veracity. resistance and good abrasion resistance. designed to optimise the space on the back of the diaphragms. Debem can count on its own The volumetric space profiles new-concept test bench, BOXER / CUBIC FAMILY are developed to guarantee the with state of the art certified total dilation of the diaphragms instruments, designed to test PTFE DIAPHRAGMS with very small air volumes. and certify the parameters Debem's pumps are designed of its own products and the This material is known for its considerable resistance to optimise the consumption efficiency of the pumps, in to temperature and chemical and corrosive agents. of air, regardless of whether compliance with the latest Diaphragms in Debem PTFE undergo a double heat electronic control systems applicable standards and in treatment to increase their elasticity and service life. A are used. Our competitors sell line with the new European sample of each batch is subject to destructive tests to check this option as an accessory but project for INDUSTRIA 4.0. their compliance with the technical requirements. This diaphragm can be installed combined with one of the ones examined earlier, in order to increase the resistance to the corrosive chemical agents and temperature of the fluid.

18 19 How does it work? Installations

The compressed air introduced by the pneumatic is integral with the exchanger shaft creates a vacuum and exchanger (A) behind one of the two diaphragms generates intakes the liquid (C). Once the stoke has been completed, the compression and pushes the product in the delivery the pneumatic exchanger diverts the compressed air SELF-PRIMING SPLIT SUCTION duct (B) at the same time, the opposing diaphragms that behind the opposing diaphragm and the cycle is reversed. and DELIVERY BOXER / CUBIC FAMILY BOXER FAMILY

B OUTLET B OUTLET

OPEN OPEN A CLOSED CLOSED A HOW DOES IT WORK AND INSTALLATIONS DOES IT WORK HOW

CLOSED OPEN OPEN CLOSED

INLET C INLET C UNDER HEAD SPLIT SUCTION

BOXER / CUBIC FAMILY BOXER FAMILY 1 – o-ring 9 – silencer filter 2 – cage 10 – cap 3 – ball 11 – vacuum manifold 4 – ball seat 12 – pump casing 5 – cap 13 – spacer 6 – fluid-side diaphragm 14 – Belleville washer 7 – air-side diaphragm 15 – cap 8 – central 16 – delivery manifold

1 16

3 8 6 7 4 5 13 14 15

IMMERSED DRUM TRANSFER

BOXER / CUBIC FAMILY BOXER / CUBIC FAMILY

9 12

10 11

20 21 Cubic CUBIC Line introduction MIDGETBOX

The ATEX - IECEx certified air-operated double diaphragm pumps, with their STANDARD: II 3G Ex h IIB T4 Gc - II 3D Ex h IIIB T135°C Dc X unique design and limited size, are ideally suited to be installed directly on Specifications and types CONDUCT: II 2G Ex h IIb T4 Gb - II 2D Ex h IIIB T135°C Db X industrial equipment for the chemical sector, to pump ink and paint, on printing machines, in oil circulation and in applications where moderate quantities of fluid must be pumped in small spaces. The CUBIC range includes the MIDGETBOX pump which is currently the smallest and highest performing pump on the market Suction / delivery connections G 1/4” f (*) for the chemical sector. Air fitting G 1/8” f Max flow rate* 6 l/min Max supply air pressure 8 bar Max head*m 80 Max negative suction head - dry-running** 3 m

Product designed and constructed in Italy Max negative suction head - pump primed 9.5 m PUMPS DOUBLE DIAPHRAGM AIR-OPERATED PATENTED stall-prevention pneumatic circuit Max diameter of suspended solids 0 mm Noise level 60 dB Operates with non-lubricated air Volume per stroke 3.2 cc Self-priming (*) Available with NPT connections (on request) Dry operation *The curves and performance are referred to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material. ** The value depends on the confi guration of the pump. ATEX certification for ZONE 1 - ZONE 2 IECEx certification Debem's CUBIC Midgetbox Adjustable operating speed PP diaphragm pumps are fitted with a centrally- Extremely versatile Maximum Dimensions positioned coaxial Suitable for pumping fluids in demanding applications Height 75 mm pneumatic motor. Width 121 mm Suitable for continuous use Depth 60 mm

Construction materials (casing and manifolds) and net weight

Polypropylene (with glass additive) 0.52 Kg CUBIC PUMPS CODES ENCODING Temp. 3°C min. 65°C max ex. ICU15P-NTTPV- - Conductive polypropylene (with carbon additive) 0.52 Kg Internal distributor, Cubic 15, PP casing, NBR air side diaphragm, PTFE product side diaphragm, PTFE balls, PP ball seats, Viton® o-ring. Temp. 3°C min. 65°C max I CU15 P N T T P V - -

INTERNAL PUMP MODEL PUMP AIR-SIDE FLUID-SIDE BALLS BALL O-RING* SPLIT CONDUCT DISTRIBUTOR CASING DIAPHRAGM DIAPHRAGM SEATS MANIFOLD VERSION

®1 I MID - Midgetbox P - Polypropylene N - NBR T - PTFE G - Pyrex R - PPS-V D - EPDM X C* (available only in 1 ® Split manifold EC - ECTFE (Halar) A - AISI 316 K - PEEK V - Viton PP/PP+CF) PC - PP+CF T - PTFE P - PP N - NBR Y CU15 - Cubic 15 T - PTFE NPT thread 90 EC - ECTFE J 20 40 60 A - AISI 316 Spacer I - PE-UHMW on shaft 80 8 1) Only for MIDGETBOX *C version CONDUCT for standard ATEX ZONE 1Ex II 2/2GD c IIB T135°C 70 7 60 6

50 MAIN APPLICATION SECTORS 5 Head (m) 40 4

30 3

A 20 2 GRAPHIC WATER AND SLUDGE B INDUSTRY TREATMENT 10 A = ball valves C1 B = pumping chamber C2 0 C1 = product-side diaphragm 0 1 2 3 4 5 6 7 8 C2 = air-side diaphragm D CHEMICAL GALVANIC AND ELECTRONIC INDUSTRY INDUSTRY Flow rate (l/min) D = pneumatic exchanger Air supply pressure (bar) Air consumption (Nl/min)

22 23 CUBIC 15

STANDARD: II 3G Ex h IIB T4 Gc - II 3D Ex h IIIB T135°C Dc X Specifications and types CONDUCT: II 2G Ex h IIb T4 Gb - II 2D Ex h IIIB T135°C Db X

Suction / delivery connections G 3/8” f (*) Air fitting G 3/8” f Max flow rate* 17 l/min Max supply air pressure 8 bar Cubic 15 Max head*m 80 PP Max negative suction head - dry-running** 3 m Maximum Dimensions

Max negative suction head - pump primed 9.5 m PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Max diameter of suspended solids 0.5 mm Height 105 mm Noise level 65 dB Width 201 mm Depth 105 mm Volume per stroke 10.3 cc Construction materials (casing and manifolds) and net weight

Polypropylene (with glass additive) 1.35 Kg 100 Temp. 3°C min. 105 65°C max 90 Conductive polypropylene (with carbon additive) 1.35 Kg Temp. 3°C min. 80 8 65°C max 70 7 Construction materials (casing and manifolds) available on request ) m

( 70 Cubic diaphragm pumps: d 60 6 a

e high performance levels, ex- POMc H 50 5 cellent power and sturdiness, UHMWPE 35 ideal for pumping liquids with 40 4 high apparent viscosity, even if 30 3 containing suspended solids.

20 2 Particularly suited for small spaces. 10

0 0 2 4 6 8 10 12 14 16 18 20

Flow rate (l/min)

Air supply pressure (bar) Air consumption (Nl/min) ECTFE Cubic 15

(*) Available with NPT connections (on request) Maximum Dimensions *The curves and performance are referred to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material. Height 105 mm ** The value depends on the confi guration of the pump. Width 201 mm Depth 105 mm

Construction materials (casing and manifolds) and net weight

MAIN APPLICATION SECTORS ECTFE 1. Kg Temp. 3°C min. 95°C max Construction materials (casing and manifolds) available on request

CERAMIC, STONE, MARBLE WATER AND SLUDGE PACKING, GLUE, GLASS AND MINING POMc TREATMENT PAPER AND PAPER MILLS INDUSTRY UHMWPE

GALVANIC AND ELECTRONIC CHEMICAL GRAPHIC INDUSTRY INDUSTRY INDUSTRY

24 25 BOXER Line introduction BOXER 7

Air-operated double diaphragm volumetric pumps, id, such as pump casings and manifolds, diaphragms, STANDARD: II 3G Ex h IIB T4 Gc - II 3D Ex h IIIB T135°C Dc X - I M2 Ex h I Mb X ATEX – IECEx certified, constructed in polypropylene balls, ball seats and o-rings, makes them compatible Specifications and types CONDUCT: II 2G Ex h IIb T4 Gb - II 2D Ex h IIIB T135°C Db X - Ex h IIB T4 Gb - Ex h IIIB T135°C Db or PVDF in the plastic version or in aluminium or AISI with any type of fluid present on the market. They can 316 L for the metal versions. BOXER pumps are ideal be used in numerous applications such as the following for pumping liquids with high apparent viscosity, even industries: chemical, graphic, paint, galvanic, ceramic, Suction / delivery connections G 1/4” f (*) if containing suspended solids. The vast range of ma- naval, textile, leather, mechanical, oil and many more. Air fitting G 1/8” f terials available for the parts in contact with the flu- Max flow rate* 9 l/min Max supply air pressure 8 bar Max head*m 80 Product designed and constructed in Italy Max negative suction head - dry-running** 4 m Max negative suction head - pump primed 9.5 m PATENTED stall-prevention pneumatic circuit Max diameter of suspended solids 0.5 mm PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Operates with non-lubricated air Noise level 65 dB Volume per stroke 3.2 cc Self-priming Dry operation Boxer 7 ATEX certification for ZONE 1 - ZONE 2 PP

IECEx certification Maximum Dimensions Adjustable operating speed Height 120 mm Width 138 mm Extremely versatile Depth 68 mm Suitable for pumping liquids with high viscosity and demanding applications Construction materials (casing and manifolds) and net weight

Possibility of pumping fluids containing suspended solids Polypropylene (with glass additive) 0.7 Kg Temp. 3°C min. Possibility of suspended installation 65°C max Manifolds can be supplied with stainless steel reinforcement rings for pumps in PP – PP+CF – PVDF Conductive polypropylene (with carbon additive) - Temp. 3°C min. Nozzles available with clamp connections and DIN 11851 (only pumps in AISI 316) 65°C max LONG LIFE profile diaphragms (available in different elastomers) for greater resistance and longer life PVDF Boxer 7 Suitable for continuous use Maximum Dimensions Height 120 mm Width 138 mm BOXER PUMPS CODES ENCODING Depth 68 mm

ex. IB50-P-HTTPV-- Construction materials (casing and manifolds) and net weight Internal distributor, Boxer 50, PP casing, Hytrel® air side diaphragm, PTFE product side diaphragm, PTFE balls, PP ball seats, Viton® o-ring. PVDF - I B50- P H T T P V - - Temp. 3°C min. INTERNAL PUMP MODEL PUMP AIR-SIDE FLUID-SIDE BALLS BALL O-RING SPLIT CONDUCT 95°C max DISTRIBUTOR CASING DIAPHRAGM DIAPHRAGM SEATS MANIFOLD VERSION 90 I N - NBR T - PTFE T - PTFE D - EPDM X* C* B7 Boxer 7 P - Polypropylene P - Polypro- 25 Boxer 15 D - EPDM A - AISI 316 V - Viton® 3* Z* B15 FC - PVDF+CF pylene 80 50 75 MICR Microboxer PC - PP+CF H - Hytrel D - EPDM N - NBR Y* 8 F - PVDF MIN Miniboxer AL - Aluminium M - Santo- N - NBR T - PTFE J* (*) Available with NPT connections (on request) prene A - AISI 316 70 B35 Boxer 35 A - AISI 316 S - Silicone W* 7 I - PE-UHMW *The curves and performance are referred to pumps with submerged suction B50 Boxer 50 and a free delivery outlet with water at 20°C, and vary according to the construction material. Boxer 81 R - PPS-V ) 60 B81 ** The value depends on the confi guration of the pump. m

( 6

B90 Boxer90 L - Aluminium d a B100 Boxer 100 e 50 H 5 B150 Boxer 150 MAIN APPLICATION SECTORS B251 Boxer 251 40 4 B252 Boxer 252 B502 Boxer 502 30 3 B522 Boxer 522 B503 Boxer 503 CERAMIC, STONE, MARBLE 2 WATER AND SLUDGE PACKING, GLUE, GLASS AND MINING AUTOMOTIVE 20 *X = split manifold C = version CONDUCT for standard ATEX ZONE 1 Ex II 2/2GD c IIB T135°C TREATMENT PAPER AND PAPER MILLS INDUSTRY *3 = 3° central hole on manifold Z = version for standard IECEx 10 *Y = “NPT” thread (both only on request) *J = spacer on shaft 0 *W = clamp manifold 0 2 4 6 8 10 12 (all only on request) PAINT GALVANIC AND ELECTRONIC CHEMICAL GRAPHIC Flow rate (l/min) INDUSTRY INDUSTRY INDUSTRY INDUSTRY 26 Air supply pressure (bar) Air consumption (Nl/min) 27 BOXER 15

STANDARD: II 3G Ex h IIB T4 Gc - II 3D Ex h IIIB T135°C Dc X - I M2 Ex h I Mb X Specifications and types CONDUCT: II 2G Ex h IIb T4 Gb - II 2D Ex h IIIB T135°C Db X - Ex h IIB T4 Gb - Ex h IIIB T135°C Db

Suction / delivery connections G 3/8” f (*) Air fitting G 3/8” f PVDF Boxer 15 Max flow rate* 17 l/min Max supply air pressure 8 bar Maximum Dimensions Max head*m 80 Max negative suction head - dry-running** 3 m Height 151 mm Width 148 mm

Max negative suction head - pump primed 9.5 m Depth 80 mm PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Max diameter of suspended solids 0.5 mm Noise level 65 dB Construction materials (casing and manifolds) and net weight Volume per stroke 10.3 cc PVDF 1.38 Kg Max 3°C min. 100 95°C max MAIN APPLICATION SECTORS 90 80 Construction materials (casing and manifolds) available on request

80 8 POMc 120 70 7 UHMWPE ) 160 CERAMIC, STONE, MARBLE, m

( WATER AND SLUDGE PACKING, GLUE, GLASS AND MINING 40 d 60 6 TREATMENT PAPER AND PAPER MILLS INDUSTRY a e H 50 5

40 4

30 3 GALVANIC AND ELECTRONIC CHEMICAL GRAPHIC INDUSTRY INDUSTRY INDUSTRY ALU Boxer 15 20 2

10 Maximum Dimensions 0 Height 141 mm 0 2 4 6 8 10 12 14 16 18 20 Width 153 mm Flow rate (l/min) Depth 80 mm

Air supply pressure (bar) Air consumption (Nl/min) (*) Available with Clamp or NPT connections (only on request) Construction materials (casing and manifolds) and net weight *The curves and performance are referred to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material. ** The value depends on the confi guration of the pump. ALU1.9 Kg Max 3°C min. 95°C max

PP Boxer 15

Maximum Dimensions Height 151 mm Boxer 15 Width 148 mm AISI 316 L steel Depth 80 mm

Maximum Dimensions Construction materials (casing and manifolds) and net weight Height 141 mm Width 153 mm Polypropylene (with glass additive) 1.1 Kg Depth 80 mm Max 3°C min. 65°C max Construction materials (casing and manifolds) and net weight

Conductive polypropylene (with carbon additive) 1.1 Kg AISI 316 L 2.4 Kg Max 3°C min. Max 3°C min. 65°C max 95°C max Construction materials (casing and manifolds) available on request Construction materials (casing and manifolds) available on request

POMc DUPLEX/W.DUPLEX UHMWPE 28 29 MICROBOXER

Suction / delivery connections G 1/2” f (*) Air fitting G 1/4” f PVDF Microboxer Max flow rate* 35 l/min Max supply air pressure 8 bar Maximum Dimensions Max head*m 80 Max negative suction head - dry-running** 4 m Height 168 mm Width 165 mm

Max negative suction head - pump primed 9.5 m Depth 120 mm PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Max diameter of suspended solids 2 mm Noise level 65 dB Construction materials (casing and manifolds) and net weight Volumecc per stroke30 PVDF 1.98 Kg Max 3°C min. 100 95°C max MAIN APPLICATION SECTORS Construction materials (casing and manifolds) available on request 90 60 120 180 240

8 80 POMc

70 7 UHMWPE ) PRODUCTION AND STORAGE CHEMICAL PAINT m (

OF BIODIESEL INDUSTRY INDUSTRY d 6

a 60 e H 50 5

40 4

GALVANIC AND ELECTRONIC GOLD PROCESSING GRAPHIC 30 3 INDUSTRY INDUSTRY INDUSTRY ALU Microboxer 20 2

10 Maximum Dimensions 0 Height 172 mm 0 5 10 15 20 25 30 35 40 Width 164 mm Flow rate (l/min) Depth 120 mm Air supply pressure (bar) Air consumption (Nl/min) (*) Available with Clamp or NPT connections (only on request) Construction materials (casing and manifolds) and net weight *The curves and performance are referred to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material. ** The value depends on the confi guration of the pump. ALU2.1 Kg Max 3°C min. 95°C max

PP Microboxer

Maximum Dimensions Height 168 mm Microboxer Width 165 mm AISI 316 L steel Depth 120 mm

Maximum Dimensions

Construction materials (casing and manifolds) and net weight Height 171 mm Width 177 mm Depth 120 mm Polypropylene (with glass additive) 1.6 Kg Max 3°C min. Construction materials (casing and manifolds) and net weight 65°C max

Conductive polypropylene (with carbon additive) 1.6 Kg AISI 316 L 3.75 Kg Max 3°C min. Max 3°C min. 65°C max 95°C max Construction materials (casing and manifolds) available on request Construction materials (casing and manifolds) available on request

POMc DUPLEX/W.DUPLEX 30 UHMWPE 31 BOXER 50 / MINIBOXER

Boxer 50 Suction / delivery connections G 1/2” or DN 15 (*) PVDF Air fitting G 3/8” f Max flow rate* 60 l/min Maximum Dimensions Max supply air pressure 8 bar Height 241 mm Max head*m 80 Width 247 mm Max negative suction head - dry-running** 4 m Depth 153 mm

Max negative suction head - pump primed 9.5 m PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Construction materials (casing and manifolds) and net weight Max diameter of suspended solids 4 mm

Noise level 70 dB PVDF 4.25 Kg Volumecc per stroke67 Max 3°C min. 95°C max

90 Construction materials (casing and manifolds) available on request 150 300 450 MAIN APPLICATION SECTORS 80 8 POMc UHMWPE 70 7

) 60 AUTOMOTIVE PRODUCTION AND STORAGE PAINT CHEMICAL m

( OF BIODIESEL INDUSTRY INDUSTRY

6 d a

e 50 H 5

40 4 CERAMIC, STONE, MARBLE, GALVANIC AND ELECTRONIC GRAPHIC GLASS AND MINING Boxer 50 30 INDUSTRY INDUSTRY ALU 3 OIL & GAS INDUSTRY

20 2 Maximum Dimensions 10 Height 234 mm GOLD PROCESSING MECHANICAL AND PACKING, GLUE, INDUSTRY METALLURGIC PAPER AND PAPER MILLS Width 241 mm 0 INDUSTRY Depth 153 mm 0 10 20 30 40 50 60 70

Flow rate (l/min) BOXER 50 MINIBOXER Construction materials (casing and manifolds) and net weight Air supply pressure (bar) Air consumption (Nl/min) ALU4.07 Kg Max 3°C min. (*) Available with NPT connections (on request) 95°C max *The curves and performance are referred to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material. ** The value depends on the confi guration of the pump.

PP Boxer 50 MINIBOXER Maximum Dimensions Height 241 mm AISI 316 L steel Width 247 mm Depth 153 mm Maximum Dimensions Construction materials (casing and manifolds) and net weight Height 232 mm Width 230 mm Depth 153 mm Polypropylene (with glass additive) 3.75 Kg Max 3°C min. 65°C max Construction materials (casing and manifolds) and net weight

Conductive polypropylene (with carbon additive) 3.75 Kg AISI 316 L 6.3 Kg Max 3°C min. Max 3°C min. 65°C max 95°C max Construction materials (casing and manifolds) available on request Construction materials (casing and manifolds) available on request DUPLEX/W.DUPLEX POMc UHMWPE 32 33 BOXER 81 / BOXER 90

Boxer 81 Suction / delivery connections G 1” or DN 25 (*) PVDF Air fitting G 3/8” f Max flow rate* 110 l/min Maximum Dimensions Max supply air pressure 8 bar Height 274 mm Max head*m 80 Width 308 mm Max negative suction head - dry-running** 4 m Depth 170 mm

Max negative suction head - pump primed 9.5 m PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Construction materials (casing and manifolds) and net weight Max diameter of suspended solids 4 mm

Noise level 70 dB 6 KgPVDF6 Volume per stroke 100 cc Max 3°C min. 95°C max

100 Construction materials (casing and manifolds) available on request MAIN APPLICATION SECTORS 90 150 300 600 900 POMc 80 UHMWPE 8 70 AUTOMOTIVE PRODUCTION AND STORAGE WATER AND SLUDGE CHEMICAL

) 7 OF BIODIESEL TREATMENT INDUSTRY m (

d 60 a

e 6 H 50 ElectropolishedAISI 316 steel Boxer 81 5 40 GRAPHIC CERAMIC, STONE, MARBLE, PAINT GLASS AND MINING 4 INDUSTRY INDUSTRY OIL & GAS 1200 INDUSTRY 30 Maximum Dimensions 3 Height 275 mm 20 Width 305 mm 2 Depth 170 mm 10 GOLD PROCESSING TEXTILE AND LEATHER PACKING, GLUE, INDUSTRY INDUSTRY PAPER AND PAPER MILLS 0 Construction materials (casing and manifolds) and net weight 0 20 40 60 80 100 120 140 Flow rate (l/min) Electropolished AISI 316 10.6 Kg Max 3°C min. Air supply pressure (bar) Air consumption (Nl/min) MECHANICAL AND GALVANIC AND ELECTRONIC METALLURGIC INDUSTRY 95°C max INDUSTRY

(*) Available with NPT connections (on request) Construction materials (casing and manifolds) available on request *The curves and performance are referred to pumps with submerged suction DUPLEX/W.DUPLEX and a free delivery outlet with water at 20°C, and vary according to the construction material. ** The value depends on the confi guration of the pump.

PP Boxer 81 BOXER 90 Maximum Dimensions Height 274 mm Width 308 mm ALU Depth 170 mm

Construction materials (casing and manifolds) and net weight Maximum Dimensions Height 291 mm Polypropylene (with glass additive) 5 Kg Width 293 mm Max 3°C min. Depth 170 mm 65°C max Construction materials (casing and manifolds) and net weight Conductive polypropylene (with carbon additive) 5 Kg Max 3°C min. ALU7 Kg 65°C max Max 3°C min. Construction materials (casing and manifolds) available on request 95°C max

POMc UHMWPE 34 35 BOXER 100

Suction / delivery connections G 1” or DN 25 (*) Air fitting G 3/8” f PVDF Boxer 100 Max flow rate* 160 l/min Max supply air pressure 8 bar Maximum Dimensions Max head*m 80 Max negative suction head - dry-running** 4 m Height 325 mm Width 329 mm

Max negative suction head - pump primed 9.5 m Depth 202 mm PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Max diameter of suspended solids 4 mm Noise level 75 dB Construction materials (casing and manifolds) and net weight Volume per stroke 222 cc PVDF 9.6 Kg Max 3°C min. 100 95°C max MAIN APPLICATION SECTORS

90 130 350 700 1050 Construction materials (casing and manifolds) available on request

80 8 POMc

70 7 AUTOMOTIVE PRODUCTION AND STORAGE WATER AND SLUDGE CHEMICAL UHMWPE ) OF BIODIESEL TREATMENT INDUSTRY m (

d 60 6 a e H 50 5

GRAPHIC CERAMIC, STONE, MARBLE, 40 4 PAINT INDUSTRY GLASS AND MINING INDUSTRY OIL & GAS INDUSTRY 30 3

20 Boxer 100 2 ALU

10 GOLD PROCESSING TEXTILE AND LEATHER PACKING, GLUE, INDUSTRY INDUSTRY PAPER AND PAPER MILLS Maximum Dimensions 0 0 20 40 60 80 100 120 140 160 180 Height 324 mm Flow rate (l/min) Width 315 mm Depth 202 mm Air supply pressure (bar) Air consumption (Nl/min) MECHANICAL AND GALVANIC AND ELECTRONIC METALLURGIC INDUSTRY INDUSTRY Construction materials (casing and manifolds) and net weight

(*) Available with NPT connections (on request) ALU8.5 Kg *The curves and performance are referred to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material. Max 3°C min. ** The value depends on the confi guration of the pump. 95°C max

PP Boxer 100

Maximum Dimensions Height 325 mm Boxer 100 Width 329 mm Electropolished AISI 316 steel Depth 202 mm

Maximum Dimensions

Construction materials (casing and manifolds) and net weight Height 327 mm Width 308 mm Depth 202 mm Polypropylene (with glass additive) 7.6 Kg Max 3°C min. Construction materials (casing and manifolds) and net weight 65°C max

Conductive polypropylene (with carbon additive) 7.6 Kg Electropolished AISI 316 11.7 Kg Max 3°C min. Max 3°C min. 65°C max 95°C max Construction materials (casing and manifolds) available on request Construction materials (casing and manifolds) available on request

POMc DUPLEX/W.DUPLEX 36 UHMWPE 37 BOXER 150

Suction / delivery connections G 1”1/4 or DN 32 (*) Air fitting G 1/2” f PVDF Boxer 150 Max flow rate* 220 l/min Max supply air pressure 8 bar Maximum Dimensions Max head*m 80 Max negative suction head - dry-running** 4 m Height 386 mm Width 399 mm

Max negative suction head - pump primed 9.5 m Depth 220 mm PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Max diameter of suspended solids 5 mm Noise level 75 dB Construction materials (casing and manifolds) and net weight Volume per stroke 340 cc PVDF 14 Kg Max 3°C min. 100 MAIN APPLICATION SECTORS 95°C max

400 800 1200 1600 90 Construction materials (casing and manifolds) available on request

80 8 AUTOMOTIVE PRODUCTION AND STORAGE WATER AND SLUDGE POMc 70 7 OF BIODIESEL TREATMENT

) UHMWPE m (

d 6

a 60 e H 50 5 CERAMIC, STONE, MARBLE, PAINT GRAPHIC GLASS AND MINING INDUSTRY 40 4 INDUSTRY INDUSTRY

30 3

20 2 ALU Boxer 150 CHEMICAL PACKING, GLUE, 10 INDUSTRY OIL & GAS PAPER AND PAPER MILLS Maximum Dimensions 0 0 50 100 150 200 250 300 Height 388 mm Flow rate (l/min) Width 394 mm MECHANICAL Depth 220 mm Air supply pressure (bar) Air consumption (Nl/min) AND METALLURGIC TEXTILE AND LEATHER GALVANIC AND ELECTRONIC INDUSTRY INDUSTRY INDUSTRY Construction materials (casing and manifolds) and net weight

(*) Available with Clamp or NPT connections (only on request) ALU15 Kg *The curves and performance are referred to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material. Max 3°C min. ** The value depends on the confi guration of the pump. 95°C max

PP Boxer 150

Maximum Dimensions Height 386 mm Boxer 150 Width 399 mm ElectropolishedAISI 316 steel Depth 220 mm

Maximum Dimensions

Construction materials (casing and manifolds) and net weight Height 390 mm Width 388 mm Depth 220 mm Polypropylene (with glass additive) 12 Kg Max 3°C min. Construction materials (casing and manifolds) and net weight 65°C max

Conductive polypropylene (with carbon additive) 12 Kg Electropolished AISI 316 23 Kg Max 3°C min. Max 3°C min. 65°C max 95°C max Construction materials (casing and manifolds) available on request Construction materials (casing and manifolds) available on request

POMc DUPLEX/W.DUPLEX 38 UHMWPE 39 BOXER 251 / BOXER 252

Suction / delivery connections G 1 1/2” f or DN 40 (*) Air fitting G 1/2” f Max flow rate* 340 l/min PVDF Boxer 251 Max supply air pressure 8 bar Max head*m 80 Maximum Dimensions Max negative suction head - dry-running** 4 m Height 492 mm

Max negative suction head - pump primed 9.5 m PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Width 493 mm Max diameter of suspended solids 6 mm Depth 254 mm Noise level 80 dB Volume per stroke 552 cc Construction materials (casing and manifolds) and net weight

PVDF 20 Kg 90 Max 3°C min. MAIN APPLICATION SECTORS 95°C max 800 80 8

7 70 1600

AUTOMOTIVE PRODUCTION AND STORAGE PAINT CHEMICAL

) 6 60 OF BIODIESEL INDUSTRY INDUSTRY m (

a 2400 e 50 5 H

40 4 TEXTILE AND LEATHER WATER AND SLUDGE GALVANIC AND ELECTRONIC Boxer 251 INDUSTRY TREATMENT INDUSTRY OIL & GAS ALU 30 3

20 2 Maximum Dimensions Height 491 mm 10 CERAMIC, STONE, MARBLE, MECHANICAL AND PACKING, GLUE, GLASS AND MINING METALLURGIC PAPER AND PAPER MILLS Width 490 mm INDUSTRY INDUSTRY Depth 254 mm 0 0 50 100 150 200 250 300 350 400 Flow rate (l/min) BOXER 251 BOXER 252 Construction materials (casing and manifolds) and net weight

Air supply pressure (bar) Air consumption (Nl/min) ALU19 Kg Max 3°C min. (*) Available with NPT connections (on request) 95°C max *The curves and performance are referred to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material. ** The value depends on the confi guration of the pump.

PP Boxer 251 BOXER 252

Maximum Dimensions Electropolished AISI 316 steel Height 492 mm Width 493 mm Maximum Dimensions Depth 254 mm Height 538 mm Width 417 mm Construction materials (casing and manifolds) and net weight Depth 254 mm

Polypropylene (with glass additive) 17.5 Kg Construction materials (casing and manifolds) and net weight Max 3°C min. 65°C max Electropolished AISI 316 26.2 Kg Max 3°C min. Conductive polypropylene (with carbon additive) 20 Kg 95°C max Max 3°C min. 65°C max Construction materials (casing and manifolds) available on request DUPLEX/W.DUPLEX

40 41 BOXER 522 / BOXER 502

Suction / delivery connections G 2” f or DN 50 (*) Air fitting G 1/2” f Max flow rate* 600 l/min PVDF Boxer 522 Max supply air pressure 8 bar Max head*m 80 Max negative suction head - dry-running** 5 m Maximum Dimensions Height 650 mm

Max negative suction head - pump primed 9.5 m PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Width 590 mm Max diameter of suspended solids 8 mm Depth 404 mm Noise level 80 dB Volume per stroke 1825 cc Construction materials (casing and manifolds) and net weight

PVDF 45 Kg 90 MAIN APPLICATION SECTORS Max 3°C min. 95°C max 80 8 1200

70 7 2400

) 60 6

m TEXTILE AND LEATHER PRODUCTION AND STORAGE PAINT CHEMICAL ( INDUSTRY OF BIODIESEL INDUSTRY INDUSTRY d a

e 50 5 3600 H BOXER 502 40 4

CERAMIC, STONE, MARBLE, WATER AND SLUDGE 30 GALVANIC AND ELECTRONIC 3 GLASS AND MINING TREATMENT INDUSTRY OIL & GAS ALU INDUSTRY

20 2 Maximum Dimensions 10 Height 621 mm MECHANICAL AND PACKING, GLUE, Width 566 mm 0 METALLURGIC PAPER AND PAPER MILLS INDUSTRY Depth 404 mm 0 100 200 300 400 500 600 700 Flow rate (l/min) BOXER 522 BOXER 502 Construction materials (casing and manifolds) and net weight Air supply pressure (bar) Air consumption (Nl/min) ALU37 Kg Max 3°C min. (*) Available with NPT connections (on request) 95°C max *The curves and performance are referred to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material. ** The value depends on the confi guration of the pump.

PP Boxer 522 BOXER 502

Maximum Dimensions Electropolished AISI 316 steel Height 650 mm Width 590 mm Maximum Dimensions Depth 404 mm Height 705 mm Width 470 mm Construction materials (casing and manifolds) and net weight Depth 404 mm

Polypropylene (with glass additive) 38 Kg Construction materials (casing and manifolds) and net weight Max 3°C min. 65°C max Electropolished AISI 316 54 Kg Max 3°C min. Conductive polypropylene (with carbon additive) 34.5 Kg 95°C max Max 3°C min. 65°C max Construction materials (casing and manifolds) available on request DUPLEX/W.DUPLEX

42 43 BOXER 503

Suction / delivery connections G 3” f or DN 80 (*) Air fitting G 3/4” f Max flow rate* 800 l/min PVDF Boxer 503 Max supply air pressure 8 bar Max head*m 80 Maximum Dimensions Max negative suction head - dry-running** 4 m Height 726 mm

Max negative suction head - pump primed 9.5 m PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Width 585 mm Max diameter of suspended solids 10 mm Depth 403 mm Noise level 80 dB Volume per stroke 1825 cc Construction materials (casing and manifolds) and net weight

PVDF 67 Kg 90 Max 3°C min. MAIN APPLICATION SECTORS 1200 95°C max 80 8

70 7 2400

) 60 6 m ( TEXTILE AND LEATHER PRODUCTION AND STORAGE PAINT d

a INDUSTRY OF BIODIESEL INDUSTRY e 50 5 3600 H

40 4 ALU Boxer 503 30 3 CERAMIC, STONE, MARBLE, WATER AND SLUDGE PACKING, GLUE, GLASS AND MINING TREATMENT PAPER AND PAPER MILLS 4800 INDUSTRY 20 2 Maximum Dimensions Height 806 mm 10 Width 580 mm

CHEMICAL MECHANICAL AND Depth 404 mm 0 INDUSTRY METALLURGIC OIL & GAS 0 100 200 300 400 500 600 700 800 900 1000 INDUSTRY Flow rate (l/min) Construction materials (casing and manifolds) and net weight

Air supply pressure (bar) Air consumption (Nl/min) ALU66 Kg Max 3°C min. 95°C max (*) Available with NPT connections (on request) *The curves and performance are referred to pumps with submerged suction and a free delivery outlet with water at 20°C, and vary according to the construction material. ** The value depends on the confi guration of the pump.

PP Boxer 503 Electropolished AISI 316 steel Boxer 503

Maximum Dimensions Maximum Dimensions Height 826 mm Height 726 mm Width 546 mm Width 585 mm Depth 404 mm Depth 403 mm Construction materials (casing and manifolds) and net weight Construction materials (casing and manifolds) and net weight

Electropolished AISI 316 71 Kg Polypropylene (with glass additive) 50 Kg Max 3°C min. Max 3°C min. 95°C max 65°C max Construction materials (casing and manifolds) available on request Conductive polypropylene (with carbon additive) 50 Kg Max 3°C min. DUPLEX/W.DUPLEX 65°C max

44 45 BOXER FPC 100

STANDARD: II 3G Ex h IIB T4 Gc, II 3D Ex h IIIB T135°C Dc (zone 2) Specifications and types CONDUCT: II 2G Ex h Iib T4 Gb, II 2D Ex h IIIB T135°C Db (zone 1)

Suction / delivery connections G 1” flanged ANSI - DN 25 Air fitting G 3/8” f Max flow rate 130 l/min Max supply air pressure 8 bar 80 mMax80 head

Max negative suction head - dry-running 4 m PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Max negative suction head - pump primed 9.5 m Max diameter of suspended solids 4 mm Noise level 75 dB Volume per stroke 250 cc

Product designed and constructed in Italy PATENTED stall-prevention pneumatic circuit Operates with non-lubricated air Self-priming Dry operation Adjustable operating speed Extremely versatile Suitable for pumping liquids with high viscosity and demanding applications Possibility of pumping fluids containing suspended solids LONG LIFE profile diaphragms for greater resistance and longer life Suitable for continuous use PTFE FPC 100 Pump made from a solid piece of PTFE

Non-deformable structure in AISI 316 stainless steel Maximum Dimensions Height 300 mm Width 230 mm 100 Depth 360 mm MAIN APPLICATION SECTORS 90 350 700 1050 1400 Construction materials (casing and manifolds) and net weight

80 8 PTFE 21.6 Kg 70 7 Max 3°C min. )

m 95°C max ( CHEMICAL d 60 6 a INDUSTRY e H 50 5

40 4 The Debem FPC100 double diaphragm pump is

30 3 constructed entirely from a solid piece of PTFE machined with a numeric control machine tool. The pump casing 20 2 is reinforced with a non-deformable AISI 316 stainless 10 steel structure. All parts in contact with the liquid are The curves and the performances refer to pumps with immersed suction and open delivery outlet, with water at 20°C. made exclusively of PTFE and pump produces a flow 0 0 20 40 60 80 100 120 140 160 rate of 130 l/min. Flow rate (l/min)

Air supply pressure (bar) Air consumption (Nl/min)

46 47 48 49 Line introduction AIR-OPERATED DOUBLE DIAPHRAGM PUMPS RC Remote Control SCUBIC WITHOUT DISTRIBUTOR

DEBEM's double diaphragm pumps of the RC line have sions. BOXER pumps are ideal for pumping liquids with STANDARD: II 3G Ex h IIB T4 Gc, II 3D Ex h IIIB T135°C Dc (zone 2) been designed for all applications that require the pump high apparent viscosity, even if containing suspended sol- Specifications and types CONDUCT: II 2G Ex h Iib T4 Gb, II 2D Ex h IIIB T135°C Db (zone 1) to be controlled remotely or directly by the machine on ids. The vast range of materials available for the parts in which the pump is installed, for example, when meas- contact with the fluid, such as pump casings and mani- uring or dosing the product. folds, diaphragms, balls, ball seats and o-rings, makes Suction / delivery connections G 3/8” f them compatible with any type of fluid present on the Air fitting G 3/8” f Max flow The RC pumps are always operated with compressed air. market. They can be used in numerous applications. rate 17 l/min All the pumps of the RC line are ATEX – IECEx certified, Max supply air pressure 8 bar constructed in polypropylene or PVDF in the plastic ver- Max negative suction head - dry-running 3 m sion or in aluminium or AISI 316 L for the metal ver- Max negative suction head - pump primed 9.5 m

Max diameter of suspended solids 0.5 mm PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Noise level 65 dB Product designed and constructed in Italy Volume per stroke 10.3 cc Air operation Self-priming Dry operation PP Scubic 15 ATEX certification for ZONE 1 - ZONE 2 IECEx certification Maximum Dimensions Height 105 mm Adjustable operating speed Width 201 mm Depth 105 mm Extremely versatile Construction materials (casing and manifolds) and net weight Suitable for pumping liquids with high viscosity and demanding applications Polypropylene (with glass additive) 1.35 Kg Possibility of pumping fluids containing suspended solids Temp. 3°C min. Possibility of suspended installation 65°C max Conductive polypropylene (with carbon additive) 1.35 Kg Manifolds can be supplied with stainless steel reinforcement rings for pumps in PP – PP+CF – PVDF Temp. 3°C min. 65°C max LONG LIFE profile diaphragms (available in different elastomers) for greater resistance and longer life Construction materials (casing and manifolds) available on request

Suitable for continuous use POMc MAIN APPLICATION SECTORS UHMWPE

CHEMICAL GRAPHIC INDUSTRY INDUSTRY

ECTFE Scubic 15

Maximum Dimensions Height 105 mm Width 201 mm Depth 105 mm

Construction materials (casing and manifolds) and net weight

ECTFE 1.35 Kg Temp. 3°C min. 95°C max

50 51 SMICRO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS WITHOUT DISTRIBUTOR

STANDARD: II 3G Ex h IIB T4 Gc, II 3D Ex h IIIB T135°C Dc (zone 2) Specifications and types CONDUCT: II 2G Ex h Iib T4 Gb, II 2D Ex h IIIB T135°C Db (zone 1)

Suction / delivery connections G 1/2” f Air fitting G 1/4” f PVDF Smicro Max flow rate 35 l/min Max supply air pressure 8 bar Maximum Dimensions Max negative suction head - dry-running 4 m Max negative suction head - pump primed 9.5 m Height 168 mm Width 165 mm

Max diameter of suspended solids 2 mm Depth 120 mm PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Noise level 65 dB Volumecc per stroke30 Construction materials (casing and manifolds) and net weight

PVDF 1.9 Kg Max 3°C min. 95°C max Construction materials (casing and manifolds) available on request

POMc UHMWPE

MAIN APPLICATION SECTORS

CHEMICAL GRAPHIC Smicro INDUSTRY INDUSTRY ALU

Maximum Dimensions Height 172 mm Width 164 mm Depth 120 mm

Construction materials (casing and manifolds) and net weight

ALU2 Kg Max 3°C min. 95°C max

PP Smicro

Maximum Dimensions Height 168 mm ScubicSmicro 15 Width 165 mm AISI 316 L steel Depth 120 mm

Maximum Dimensions

Conductive polypropylene (with carbon additive) 1.6 Kg AISI 316 L 3.8 Kg Max 3°C min. Max 3°C min. 65°C max 95°C max Construction materials (casing and manifolds) available on request Construction materials (casing and manifolds) available on request

POMc DUPLEX/W.DUPLEX 52 UHMWPE 53 SBOXER 50 / SMINI AIR-OPERATED DOUBLE DIAPHRAGM PUMPS WITHOUT DISTRIBUTOR

STANDARD: II 3G Ex h IIB T4 Gc, II 3D Ex h IIIB T135°C Dc (zone 2) Specifications and types CONDUCT: II 2G Ex h Iib T4 Gb, II 2D Ex h IIIB T135°C Db (zone 1)

Suction / delivery connections G 1/2” f or DN 15 - Clamp or NPT on request PVDF Sboxer 50 Air fitting G 3/8” f Max flow rate 60 l/min Max supply air pressure 8 bar Maximum Dimensions Max negative suction head - dry-running 4 m Height 241 mm Width 247 mm Max negative suction head - pump primed 9.5 m Depth 153 mm

Max diameter of suspended solids 4 mm PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Noise level 70 dB Construction materials (casing and manifolds) and net weight Volumecc per stroke67 PVDF 1.9 Kg Max 3°C min. 95°C max Construction materials (casing and manifolds) available on request

POMc UHMWPE

MAIN APPLICATION SECTORS

ALU Sboxer 50 CHEMICAL GRAPHIC INDUSTRY INDUSTRY Maximum Dimensions Height 234 mm Width 241 mm Depth 153 mm

Construction materials (casing and manifolds) and net weight

ALU2 Kg Max 3°C min. 95°C max

PP Sboxer 50 SMINI Maximum Dimensions Height 241 mm Width 247 mm AISI 316 L steel Depth 153 mm Maximum Dimensions Height 232 mm Width 230 mm Construction materials (casing and manifolds) and net weight Depth 153 mm

Polypropylene (with glass additive) 1.6 Kg Construction materials (casing and manifolds) and net weight Max 3°C min. 65°C max AISI 316 L 3.8 Kg Max 3°C min. Conductive polypropylene (with carbon additive) 1.6 Kg 95°C max Max 3°C min. 65°C max Construction materials (casing and manifolds) available on request Construction materials (casing and manifolds) available on request

DUPLEX/W.DUPLEX POMc 54 UHMWPE 55 SBOXER 100 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS WITHOUT DISTRIBUTOR

STANDARD: II 3G Ex h IIB T4 Gc, II 3D Ex h IIIB T135°C Dc (zone 2) Specifications and types CONDUCT: II 2G Ex h Iib T4 Gb, II 2D Ex h IIIB T135°C Db (zone 1)

Suction / delivery connections G 1” f or DN 25 - NPT on request Air fitting G 3/8” f PVDF Sboxer 100 Max flow rate 160 l/min Max supply air pressure 8 bar Maximum Dimensions Max negative suction head - dry-running 4 m Max negative suction head - pump primed 9.5 m Height 325mm Width 329 mm

Max diameter of suspended solids 4 mm Depth 202 mm PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Noise level 75 dB Volume per stroke 222 cc Construction materials (casing and manifolds) and net weight

PVDF 8.5 Kg Max 3°C min. 95°C max

Construction materials (casing and manifolds) available on request

POMc UHMWPE

MAIN APPLICATION SECTORS

CHEMICAL GRAPHIC INDUSTRY INDUSTRY ALU Sboxer 100

Maximum Dimensions Height 324 mm Width 315 mm Depth 202 mm

Construction materials (casing and manifolds) and net weight

ALU8.2 Kg Max 3°C min. 95°C max PP Sboxer 100

Maximum Dimensions Height 325 mm SboxerScubicSmicro 10015 Width 329 mm Electropolished AISI 316 steel Depth 202 mm

Maximum Dimensions

Construction materials (casing and manifolds) and net weight Height 327 mm Width 308 mm Depth 202 mm Polypropylene (with glass additive) 7.5 Kg Max 3°C min. Construction materials (casing and manifolds) and net weight 65°C max

Conductive polypropylene (with carbon additive) 7.5 Kg Electropolished AISI 316 11 Kg Max 3°C min. Max 3°C min. 65°C max 95°C max Construction materials (casing and manifolds) available on request Construction materials (casing and manifolds) available on request

POMc DUPLEX/W.DUPLEX 56 UHMWPE 57 FULLFLOW 502 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS WITH FLAP CIRCUIT

The new FULLFLOW 502 pump is fitted with flaps in- patented flap circuit positioned below, perpendicularly stead of balls, which allow the passage of large-sized to the fluid chambers instead of being in axis. The fluid solids, reducing at the same time the crushing normal- dynamics of this choice ensure that the solids transit ly associated to the passage through balls and cages. outside the pump casing, following a linear path at a Even though the maximum diameter for the passage of lower level to the pump. solids of 45 mm is not exclusive, the uniqueness for this The maximum flow rate of the pump is about 530 litres type of pumps lies in the maximum length of the sol- per minute. ids: 600 mm. Similarly, the pump features an exclusive AIR-OPERATED DOUBLE DIAPHRAGM PUMPS DOUBLE DIAPHRAGM AIR-OPERATED

Polypropylene casing Flap in EPDM and NBR, core in AISI 316 steel, always in contact with the fluid Can be split in suction and delivery Fittings: G 2”1/2 f or DN 65 Air fitting: ½” Supply: min. 2 bar – max 4 bar Max. flow rate: 530 l/min Max. head: 40 m Max. dry suction: 3.5 m Max. flooded negative suction: 8 m Max. solids diameter: 45 mm Max. solid filaments length: 600 mm* *On request it can be configured for greater lengths. Consult the sales office.

The new FULLFLOW 502 pump is fitted with flaps instead of balls, that allow the passage of large-sized solids

58 59 FULLFLOW 502 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS WITH FLAP CIRCUIT

STANDARD: II 3G Ex h IIB T4 Gc, II 3D Ex h IIIB T135°C Dc (zone 2) Specifications and types CONDUCT: II 2G Ex h Iib T4 Gb, II 2D Ex h IIIB T135°C Db (zone 1)

Suction / delivery connections G 2”1/2 or DN 65 Air fitting G 1/2” f Max flow rate* 530 l/min Max supply air pressure 4 bar

Max head* 40 m PUMPS DOUBLE DIAPHRAGM AIR-OPERATED Max negative suction head - dry-running** 3.5 m Max diameter of suspended solids 45 mm Max length of solids 600 mm

70 MAIN APPLICATION SECTORS

60 500 900 1800

50 )

m CERAMIC, STONE, MARBLE, WATER AND SLUDGE ( GLASS AND MINING TREATMENT d 4 a INDUSTRY e 40 H

3 30

2 TEXTILE AND LEATHER PACKING, GLUE, GALVANIC ADN ELECTRONIC 20 INDUSTRY PAPER AND PAPER MILLS INDUSTRY 2700

0 0 100 200 300 400 500 600 A = CAP A Flow rate (l/min) B = FLAP SEAT C = FLAP WEAR RING Air supply pressure (bar) Air consumption (Nl/min)

* The performance values refer to primed pumps (with water at 20°C) with open outlet and vary based on the construction materials. ** Attention: average values of the different materials configurations for ball and ball seat.

Maximum Dimensions Height 691 mm Width 580 mm Depth 952 mm

Construction materials (casing and manifolds) and net weight B C

Polypropylene (with glass additive) 55 Kg Max 3°C min. 65°C max

60 61 Chemical compatibility Online configurator

The type of fluid, the temperature compatibility of the pump. possible effects after this period. and the operating environment The user, with their in-depth Debem does not guarantee (nei- are the factors that influence the knowledge of their product, can ther expressly nor implicitly) that selection of the pump materials make the most accurate decision the information contained in this and its correct chemical compat- regarding the chemical compati- table is accurate or complete or ibility. bility. that any material is suitable for any use. The table below is included by way WARNING of example. The information in this table has DANGER CHEMICAL TABLE AND CONFIGURATOR TABLE CHEMICAL For more information don't hesi- been supplied to Debem from Changes in the chemical behav- tate to contact the Debem techni- other reliable sources and must iour during handling, due to fac- cal support. We have collected the be used EXCLUSIVELY as a guide tors such as temperature, pres- information from reliable sources. in selecting the materials for the sure and concentrations, could Debem, not having carried any pump parts in contact with the trigger issues in the pump. verification of the data, cannot be fluid, such as: Pump casing and Use adequate protections and/ held responsible for the correct- manifolds, diaphragms, balls, or personal protection equipment ness of the information. The table ball seats and o-rings. when installing the pump in the refers to pure polypropylene and The assessment of the chemical circuit or when performing main- PVDF. Our plastic materials con- reaction listed in this table refers tenance on the pump. Read the tain glass and carbon additives to an exposure period of 48 hours. use and maintenance manual be- that could influence the chemical Debem has no knowledge of the fore any operation on the pump. ) ® ® ) ® ) ) ) ) ) ® ® ® ® ® Polypropylene PVDF ECTFE (Halair Aluminium steel Stainless AISI 316 steel NBR (Perbunan EPDM (Dutral PTFE (Teflon FPM (Vitron PPS-V (Ryton PE-UHMW (Polyzen SUBSTANCE Santoprene

Acetaldehyde A1 D B A D A A A D - B

Acetamide A1 C A A A A A A B - - CONFIGURE Vinyl acetate B1 A2 A1 B D B2 A2 - A1 - D THE MOST SUITABLE DEBEM Acetylene A1 A A A B A A A A - - INDUSTRIAL PUMP FOR Vinegar A B D A B A A A A - A YOUR REQUIREMENTS IN JUST A FEW SIMPLE Acetone A D A A D A A A D A1 A2 CLICKS Fatty acids A A A A B D A - A D A

A = Excellent - = Information not available B = Good 1 = Satisfactory up to 22°C (72°F) Go to www.debem.com C = Poor (not recommended) 2 = Satisfactory up to 48°C (120°F) and in the RESOURCES section you will find D = Serious attack (not recommended) the pumps configurator, which will help you in choosing the most suitable solution from the various products available. www.debem.com

For more information don't hesitate to contact the Debem technical support. We have collected the information from reliable sources. Debem, not having carried any verification of the data, cannot be held responsible for the correctness of the information.

62 63 Technical specifications AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ESEMPIO ILLUSTRATIVO LETTURA GRAFICO DI PRESTAZIONI

EXAMPLE ILLUSTRATING THE GRAPHIC READING OF THE PERFORMANCE

) 90 m (

d COMPRESSORS TABLE DISPLACEMENT CAPACITY TABLE a

e 25 50 75

H 80 8 airpressione supply pressure aria 70 di alimentazione Compressor 7 Air Pump air supply pressure approximate Displacement 60 consumption type 6 power SPECIFICATIONS TECHNICAL 50 5 airconsumo consumption aria (NI/min) (Nl/min) 40 4 air consumption (Nl/min) Nl/min HP BOXER 7 3.2 cc

30 3

20 for example: 50 0.5 BOXER 15 10.3 cc 2 Flowesempio: rate 16 l/min Pump• Portata head 2 l/min30 m/ca 10 Supply• Prevalenza pressure: 27 mt/ca4 bar Air• Pressione consumption: di alimentazione 170 Nl/min 4 bar 100 1 MICROBOXER 30 cc 0 • Consumo aria 25 Nl/min 0 2 4 6 8 10 12

Flow rate (l/min) 200 2 MINIBOXER/B50 67 cc

DECREASE INCALO THE DELLA FLOW PORTATA RATE IN FUNZIONE RELATING DELLA TOVISCOSITÀ THE VISCOSITY 250 2.5 BOXER 81/90 100 cc Portata disponibile

100% 350 3.5 BOXER 100 222 cc 90%

80%

70% 450 4.5 BOXER 150 340 cc

60% 50% 550 5.5 BOXER 251/252 522 cc 40%

30% 850 8.5 BOXER 502/522 1,825 cc 20%

10%

0 1000 10 BOXER 503 1,852 cc 0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000 Viscosity of the fl uid (mPa.s) Viscosità del fluido (mPa.s) 1500 15

BOXER PUMPSPOMPE BOXER - LOSS - PERDITA OF FLOW DELLA PORTATACAPACITY SU ALTEZZA ON THE DI ASPIRAZIONE SUCTION HEIGHT

Perdita di 2000 20 portata

50% 3500 30 45%

40% 35% 4000 40 30%

25%

20%

15% The power effectively absorbed by the compressor Attention: when operating with an OPEN OUTLET, 10% is about =70% of the value indicated in the table. the actual flow rate is much higher than the

5% We recommend using a compressor with a tank. ratio between number of cycles measured and displacement, due to the quantity of movement. 0 0 2 4 6 7

SuctionAltezza diheight aspirazione (mt) (Mt) PerditaLoss di portataof flow in capacity percentuale, in percentage in funzione relating dell’altezza to the disuction aspirazione. height. 64 65 EQUAFLUX Line introduction EQUAFLUX 51 AUTOMATIC PULSATION DAMPERS STANDARD: II 3G Ex h IIB T4 Gc, II 3D Ex h IIIB T135°C Dc (zone 2) Specifications and types CONDUCT: II 2G Ex h Iib T4 Gb, II 2D Ex h IIIB T135°C Db (zone 1) The EQUAFLUX dampers are used with fluids with a and/or the environment, without neglecting the correct high apparent viscosity, also with large suspended temperature range. The dampers are also available for solids.. use in potentially explosive atmospheres (ATEX certifi- They adapt automatically to the system conditions, cation). without any manual adjustments or calibrations. The

high capacity of minimising pulsations, vibrations and The EQUAFLUX is operated by the same compressed PP ALU DAMPERS PULSATION water hammer renders this component ideal for pro- air that drives the pump. The compressed air, intro- tecting the system, providing a regular outlet flow. duced in the counter-pressure chamber (behind the di- The vast range of construction materials allows us to aphragm), creates a self-adjusting pneumatic damping select the best chemical compatibility with the fluid cushion based on the pressure exerted by the pump.

Product designed and constructed in Italy Operates with non-lubricated air High performance and strength Suitable for minimising pulsating flows PVDF AISI 316 L steel Suitable for minimising vibrations during the operation of the pump

EQUAFLUX DAMPERS CODES ENCODING

ex. EQ100PCHTC Equaflux 100 PP+CF, Hytrel®, air side diaphragm, PTFE product side diaphragm, conduct.

EQ100 PC H T C Fitting Air fitting Operating Material* Operating Dim. Application (half-casing in contact Weight DAMPER DAMPER AIR-SIDE PRODUCT-SIDE CONDUCT Product pressure time MODEL CASING DIAPHRAGM DIAPHRAGM VERSION with the fluid) (mm)

EQ 51 - Equaflux 51 P - Polypropylene H - Hytrel® T - PTFE (zone 1) EQ 100 - Equaflux 100 ® FC - PVDF+CF M - Santoprene Midgetbox, Cubic15 EQ 200 - Equaflux 200 R - PPS-V D - EPDM G 3/4” Ø 6 mm Min 2 Bar - Max 8 Bar Boxer7, Boxer15 Polypropylene 0.5 Kg from +3°C to +65°C 121x117 EQ 302 - Equaflux 302 II 2/2GD A - AISI 316 N - NBR Microboxer, Boxer35 EQ 303 - Equaflux 303 c IIB T135°C (excluded EQ 303) AL - Aluminium C - on request PC - PP + CF Midgetbox, Cubic15 G 3/4” Ø 6 mm Min 2 Bar - Max 8 Bar Boxer7, Boxer15 PP + CF 0.5 Kg from +3°C to +65°C 121x117 Microboxer, Boxer35

C G 3/4” Ø 6 mm Min 2 Bar - Max 8 Bar Cubic15, Boxer7, Boxer15 PVDF 0.5 Kg from +3°C to +95°C 121x117 Microboxer, Boxer35

* Three-phase asynchronous eurotension motor fitted as standard (2 poles) 50Hz ** Available only for IM 80/90 pumps D G 3/4” Ø 6 mm Min 2 Bar - Max 8 Bar Boxer7, Boxer15 PPS 0.6 Kg from +3°C to +95°C 121x117 Microboxer, Boxer35

G 1/2” Ø 6 mm Min 2 Bar - Max 8 Bar Boxer7, Boxer15 AISI 316 L steel 1.33 Kg from +3°C to +95°C 133x117 Microboxer, Boxer35 A = expansion chamber B2 = air-side diaphragm *Material on request: • UHMWPE • POMc • DUPLEX/S.DUPLEX B2 = fluid-side diaphragm C = automatic pneumatic valve D = pneumatic chamber AIR SIDE HALF-CASING MATERIAL CAPS MATERIALS • PP • Polypropylene (with glass additive) • PP+CF • Conductive polypropylene (with carbon • ALUMINIUM additive) • PVDF B1 DIAPHRAGM MATERIALS • PPS • NBR • Natural ECTFE • EPDM • AISI 316 L • Hytrel • Santoprene A B2 • PTFE 66 67 EQUAFLUX 100 EQUAFLUX 200

STANDARD: II 3G Ex h IIB T4 Gc, II 3D Ex h IIIB T135°C Dc (zone 2) STANDARD: II 3G Ex h IIB T4 Gc, II 3D Ex h IIIB T135°C Dc (zone 2) Specifications and types CONDUCT: II 2G Ex h Iib T4 Gb, II 2D Ex h IIIB T135°C Db (zone 1) Specifications and types CONDUCT: II 2G Ex h Iib T4 Gb, II 2D Ex h IIIB T135°C Db (zone 1)

PP PPS PP PPS DAMPERS PULSATION

PVDF Electropolished AISI 316 steel PVDF Electropolished AISI 316 steel

Fitting Air fitting Operating Material* Operating Dim. Fitting Air fitting Operating Material* Operating Dim. Application (half-casing in contact Weight Application (half-casing in contact Weight Product pressure with the fluid) time (mm) Product pressure with the fluid) time (mm)

Boxer50, Boxer81 Boxer100, Boxer150 G 1” Ø 6 mm Min 2 Bar - Max 8 Bar Polypropylene 1.5 Kg from +3°C to +65°C 177x170 G 1”1/2 Ø 6 mm Min 2 Bar - Max 8 Bar Boxer251 Polypropylene 3.8 Kg from +3°C to +65°C 283.2x254

Boxer50, Boxer81 Boxer100, Boxer150 G 1” Ø 6 mm Min 2 Bar - Max 8 Bar PP+CF 1.5 Kg from +3°C to +65°C 177x170 G 1”1/2 Ø 6 mm Min 2 Bar - Max 8 Bar Boxer251 PP+CF 3.8 Kg from +3°C to +65°C 283.2x254

G 1” Ø 6 mm Min 2 Bar - Max 8 Bar Boxer50, Boxer81 PVDF 1.7 Kg from +3°C to +95°C 177x170 G 1”1/2 Ø 6 mm Min 2 Bar - Max 8 Bar Boxer100, Boxer150 PVDF 4.5 Kg from +3°C to +95°C 283.2x254 Boxer251

G 1” Ø 6 mm Min 2 Bar - Max 8 Bar Boxer50, Boxer90 PPS 1.7 Kg from +3°C to +95°C 177x170 G 1”1/2 Ø 6 mm Min 2 Bar - Max 8 Bar Boxer100, Boxer150 PPS 4.5 Kg from +3°C to +95°C 283.2x254 Boxer251

G 1” Ø 6 mm Min 2 Bar - Max 8 Bar Miniboxer, Boxer81 Electropolished 2.56 Kg from +3°C to +95°C 183.2x151 G 1”1/2 Ø 6 mm Min 2 Bar - Max 8 Bar Boxer100, Boxer150 Electropolished 7.45 Kg from +3°C to +95°C 264.7x254 AISI 316 steel Boxer252 AISI 316 steel

*Material on request: • UHMWPE • POMc • DUPLEX/S.DUPLEX *Material on request: • UHMWPE • POMc • DUPLEX/S.DUPLEX

AIR SIDE HALF-CASING MATERIAL CAPS MATERIALS AIR SIDE HALF-CASING MATERIAL CAPS MATERIALS

• PP • Polypropylene (with glass additive) • PP • Polypropylene (with glass additive) • PP+CF • Conductive polypropylene (with carbon • PP+CF • Conductive polypropylene (with carbon additive) additive) DIAPHRAGM MATERIALS • PVDF DIAPHRAGM MATERIALS • PVDF • PPS • Natural ECTFE • NBR • Natural ECTFE • NBR • AISI 316 L • EPDM • AISI 316 L • EPDM • Alluminio • Hytrel • Hytrel • Santoprene • Santoprene • PTFE • PTFE 68 69 EQUAFLUX 302 EQUAFLUX 303

PVDF Electropolished PVDF AISI 316 steel

G 2” Ø 8 mm Min 2 Bar - Max 8 Bar Boxer522 Polypropylene 23 Kg from +3°C to +65°C 398x516 G 3” Ø 8 mm Min 2 Bar - Max 8 Bar Boxer503 Polypropylene 23 Kg from +3°C to +65°C 398x516

G 2” Ø 8 mm Min 2 Bar - Max 8 Bar Boxer522 PP + CF 23 Kg from +3°C to +65°C 398x516 G 3” Ø 8 mm Min 2 Bar - Max 8 Bar Boxer503 PP + CF 23 Kg from +3°C to +65°C 398x516

G 2” Ø 8 mm Min 2 Bar - Max 8 Bar Boxer522 PVDF 28.5 Kg from +3°C to +95°C 398x516 G 3” Ø 8 mm Min 2 Bar - Max 8 Bar Boxer503 PVDF 28.5 Kg from +3°C to +95°C 398x516

G 2” Ø 8 mm Min 2 Bar - Max 8 Bar Boxer502 ALU 26 Kg from +3°C to +95°C 356x352 G 3” Ø 8 mm Min 2 Bar - Max 8 Bar Boxer503 ALU 29 Kg from +3°C to +95°C 356X352

*Material on request: • DUPLEX/S.DUPLEX

G 2” Ø 8 mm Min 2 Bar - Max 8 Bar Boxer502 Electropolished 32 Kg from +3°C to +95°C 356x352 AISI 316 steel

*Material on request: • DUPLEX/S.DUPLEX

AIR SIDE HALF-CASING MATERIAL CAPS MATERIALS AIR SIDE HALF-CASING MATERIAL CAPS MATERIALS

• Central boxer 502/503 (PP) • Polypropylene (with glass additive) • Central boxer 502/503 (PP) • Polypropylene (with glass additive) • Conductive polypropylene (with carbon • Conductive polypropylene (with carbon additive) additive) DIAPHRAGM MATERIALS • PVDF DIAPHRAGM MATERIALS • PVDF • Aluminium • AISI 316 L • NBR • AISI 316 L • NBR • Alluminio • EPDM • EPDM • Hytrel • Hytrel • Santoprene • Santoprene • PTFE • PTFE 70 71 72 73 DM Line introduction MAGNETIC DRIVE CENTRIFUGAL PUMPS

Debem's magnetic drive centrifugal pumps are the ide- The pumps are driven by a pair of magnets: the out- al solution for numerous applications: laboratory ma- er magnet is positioned on the motor shaft and trans- DM PUMPS CODES ENCODING chines, medical equipment, photographic developing mits the motion to the inner magnet integrated with the machines, X-ray processes, silver recovery systems, hermetically sealed impeller. The pump impeller is not ex. DM10P-SD1BE071 DM10 PP, standard thrust bearing, EPDM o-ring, Ø 98 mm impeller, BSP fitting, MEC motor flange, 071 casing. graphics industry, heat exchangers, aquariums, water physically fixed to the motor shaft, thereby eliminating treatment, filtering systems, galvanic and chemical in- the need for seals and consequently any leaks of the PUMPS CENTRIFUGAL dustry and the transfer of acids and corrosive fluids. liquid being pumped due to wear. The pumping unit is DM10 P S D 1 B E 071 PUMP MODEL PUMP THRUST BEAR- O-RING IMPELLER FITTING MOTOR CASING The DM pumps must be installed exclusively with the constructed with a low number of components, render- CASING ING FLANGE axis horizontal under head. Suitable devices must be ing maintenance extremely easy. The materials used D - EPDM DM06 N - NPT E - MEC DM06 DM06 P - Polypropylene S - Standard DM10 (ceramic + V - Viton® 1=Ø 81 B - BSP U* - NEMA 063 included to avoid the dry-operation and the formation as standard are polypropylene (PP) and polyvinylidene FC - PVDF+CF DM15 PTFE Graphite) 2=Ø 70 071 of vortexes and the possible suction of air. fluoride (PVDF). The pumps cannot operate dry. Dirty DM30 3=Ø 65 DM10 The DM pumps must operate exclusively with the liquids can reduce their life. DM10 071 1=Ø 98 080 PUMP FLOODED 2=Ø 85 DM15 3=Ø 70 090 DM15 DM30 1=Ø 123 090 2=Ø 108 100 Product designed and constructed in Italy 3=Ø 90 112 DM30 1=Ø 134 Constructed in polypropylene or PVDF 2=Ø 122 3=Ø 110 Under head use * Only the pump can be supplied, with American flange, for coupling with NEMA motor Extremely easy to maintain Suitable for continuous use

5 4 MAIN APPLICATION SECTORS Components Materials

1 Shaft Alumina ceramic 99.7% 2 Impeller thrust PTFE + AUTOMOTIVE CHEMICAL GALVANIC AND ELECTRONIC WATER AND SLUDGE 2 bearing 30% Graphite INDUSTRY INDUSTRY TREATMENT PTFE + Bushing 3 30% Graphite DM06 DM10 DM15 DM30 1 4 O-Ring Viton®/EPDM

5 Impeller PP/PVDF+CF 6 6 Pump casing PP/PVDF+CF

Head thrust 7 Alumina ceramic 99.7% 7 bearing 3

74 75 DM 06 DM 10

Specifications and types Specifications and types

Suction fittings G 1” f or DN 25 - NPT Suction fittings G 1”1/2 f or DN 40 - NPT Delivery fittings G 3/4” m or DN 20 - NPT Delivery fittings G 1” m or DN 25 - NPT Max flow rate 7 m3/h Max flow rate 13 m3/h 8.5 mMax8.5 head mMax14 head MAGNETIC DRIVE CENTRIFUGAL PUMPS DRIVE CENTRIFUGAL MAGNETIC Viscosity up to 150 cps Viscosity up to 150 cps

PP PVDF PP PVDF

9 16 Ø 81 mm Standard electric motor: Standard electric motor: 8 Kw 0.25 HP 0.35 Kw 0.55 HP 0.75 14 Ø 98 mm Casing B3+B5 RPM 2900 Casing B3+B5 RPM 2900 7 Ø 70 mm Three-phase 230/400 V 12 Three-phase 230/400 V - 50/60 HZ ) ) 6 50/60 HZ 2 Poles IE1 Protection IP55 m ( m

Ø 85 mm (

10 d d

2 Poles IE1 Protection IP55 a Ambient temperature -30°C + 45°C a e e

5 Ø 65 mm H H Ambient temperature -30°C + 45°C Kw 0.75 HP 1 8 4 Kw 0.37 HP 0.5 Casing B3+B5 RPM 2900 Casing B3+B5 RPM 2900 6 Ø 70 mm Three-phase 230/400 V - 50/60 HZ 3 Three-phase 230/400 V 2 Poles IE3 Protection IP55 4 2 50/60 HZ Ambient temperature -30°C + 45°C 2 Poles IE1 Protection IP55 2 1 Ambient temperature -30°C + 45°C Kw 0.55 HP 0.75

0 0 Casing B3+B5 RPM 2900 0 2 4 6 8 10 12 14 0 1 2 3 4 5 6 7 8 Kw 0.25 HP 0.35 Single-phase Flow rate (m3/h) Casing B3+B5 RPM 2900 Ambient temperature -30°C + 45°C Flow rate (m3/h) Single-phase Kw 0.75 HP 1

The curves and the performances refer to pumps with immersed suction and open delivery outlet, with Ambient temperature -30°C + 45°C The curves and the performances refer to pumps with immersed suction and open delivery outlet, with Casing B3+B5 RPM 2900 water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). Kw 0.37 HP 0.5 water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). Single-phase Casing B3+B5 RPM 2900 Ambient temperature -30°C + 45°C IMPELLER Motor 0.25 Kw (0.35 HP) so PP* Motor 0.37 Kw (0.5 HP) IMPELLER Motor 0.55 Kw (3 HP) Motor 0.75 Kw (4 HP) Single-phase Ø 81 mm (Standard) up to 1.2 g/cm3 up to 1.8 g/cm3 Ø 98 mm (Standard) up to 1.1 g/cm3 up to 1.5 g/cm3 Ambient temperature -30°C + 45°C Ø 70 mm up to 1.5 g/cm3 up to 2 g/cm3 Ø 85 mm up to 1.6 g/cm3 up to 2 g/cm3 Electric motors available on request: Ø 65 mm up to 1.8 g/cm3 up to 2 g/cm3 Ø 70 mm up to 2 g/cm3 up to 2 g/cm3 SINGLE-PHASE ATEX Electric motors available on request: Operating temperature: Operating temperature and weights: NEMA 56C* / 143TC SINGLE-PHASE *(only pump available, with American flange, for coupling PP from +3°C to +65°C, 2 Kg PP from + 3°C to + 65°C, 2.2 Kg ATEX with NEMA motor - the motor is not available in our PVDF from +3°C to +95°C, 2.25 Kg PVDF from + 3°C to + 95°C, 2.5 Kg standard) NEMA 56C* *(only pump available, with American flange, for coupling with NEMA motor - the motor is not available in our standard) 76 77 DM 15 DM 30

Specifications and types Specifications and types

Suction fittings G 1”1/2 f or DN 40 - NPT Suction fittings G 2” f or DN 50 - NPT Delivery fittings G 1”1/4 m or DN 32 - NPT Delivery fittings G 1”1/2 m or DN 40 - NPT Max flow rate 23.5 m3/h Max flow rate 35 m3/h Max head 20 m Max head 8.5 m PUMPS DRIVE CENTRIFUGAL MAGNETIC Viscosity up to 150 cps Viscosity up to 150 cps

PP PVDF PP PVDF

25 30 Standard electric motor: Standard electric motor: Kw 1.5 HP 2 Kw 2.2 HP 3

Ø 123 mm 25 20 Casing B3+B5 RPM 2900 Ø 134 mm Casing B3+B5 RPM 2900 Three-phase 230/400 V - 50/60 HZ Three-phase 230/400 V - 50/60 HZ ) 2 Poles IE3 Protection IP55 ) 20 Ø 122 mm 2 Poles IE3 Protection IP55 m m ( ( Ø 108 mm

d d 15 Ambient temperature -30°C + 45°C Ambient temperature -30°C + 45°C a a e e H H Kw 2.2 HP 3 15 Ø 110 mm Kw 3 HP 4

Ø 90 mm Casing B3+B5 RPM 2900 Casing B3+B5 RPM 2900 10 Three-phase 230/400 V - 50/60 HZ Three-phase 230/400 V - 50/60 HZ 10 2 Poles IE3 Protection IP55 2 Poles IE3 Protection IP55

5 Ambient temperature -30°C + 45°C Ambient temperature -30°C + 45°C 5 Kw 4 HP 5.5 Kw 1.5 HP 2 Casing B3+B5 RPM 2900 0 Casing B3+B5 RPM 2900 0 Three-phase 230/400 V - 50/60 HZ 0 5 10 15 20 25 30 0 5 10 15 20 25 30 35 40 Single-phase 2 Poles IE3 Protection IP55 Flow rate (m3/h) Flow rate (m3/h) Ambient temperature -30°C + 45°C Ambient temperature -30°C + 45°C Kw 2.2 HP 3

The curves and the performances refer to pumps with immersed suction and open delivery outlet, with Casing B3+B5 RPM 2900 The curves and the performances refer to pumps with immersed suction and open delivery outlet, with Kw 2,2 HP 3 water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). Single-phase water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). Casing B3+B5 RPM 2900 Ambient temperature -30°C + 45°C Single-phase IMPELLER Motor 1.5 Kw (2 HP) Motor 2.2 Kw (3 HP) IMPELLER Motor 2.2 Kw (3 HP) Motor 3 Kw (4 HP) Motor 4 Kw (5.5 HP) Temperatura ambiente -30°C + 45°C Ø 123 mm (Standard) up to 1.1 g/cm3 up to 1.8 g/cm3 Ø 134 mm (Standard) up to 1.1 g/cm3 up to 1.5 g/cm3 up to 1.8 g/cm3 Kw 3 HP 4 Ø 108 mm up to 1.6 g/cm3 up to 2 g/cm3 Electric motors available on request: Ø 122 mm up to 1.4 g/cm3 up to 2 g/cm3 up to 2 g/cm3 Casing B3+B5 RPM 2900 Ø 90 mm up to 2 g/cm3 up to 2 g/cm3 SINGLE-PHASE Ø 110 mm up to 1.8 g/cm3 up to 2 g/cm3 up to 2 g/cm3 Single-phase ATEX Ambient temperature -30°C + 45°C Operating temperature and weights: NEMA 145TC Operating temperature and weights: Electric motors available on request: *(only pump available, with American flange, for coupling PP from + 3°C to + 65°C, 4.5 Kg PP from + 3°C to + 65°C, 6 Kg with NEMA motor - the motor is not available in our SINGLE-PHASE PVDF from + 3°C to + 95°C, 5.2 Kg standard) PVDF from + 3°C to + 95°C, 7 Kg ATEX NEMA 145TC* / 184TC* *(only pump available, with American flange, for coupling with NEMA motor - the motor is not available in our standard) 78 79 KM 70

Specifications and types

Suction fittings G 3” f or DN 80 - NPT on request Delivery fittings G 2”1/2 m or DN 65 - NPT on request Max flow rate

65 m3/h PUMPS DRIVE CENTRIFUGAL MAGNETIC 29 mMax29 head Viscosity up to 150 cps

Operating temperature and weights: PP from + 3°C to + 65°C, 33 Kg PVDF from + 3°C to + 95°C, 34,5 Kg PP PVDF

MAIN APPLICATION SECTORS

CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC INDUSTRY TREATMENT INDUSTRY

35 Standard electric motor: Kw 4 HP 5.5 30 Ø 145 mm Casing B3+B5 RPM 2900 Ø 139 mm Three-phase 230/400 V - 50/60 HZ 25

) ATEX available on request m

( Ø 129 mm

a 20 e IMPELLER H Ø 119 mm Kw 5.5 HP 7.5 Ø 145 mm (Standard) 15 Casing B3+B5 RPM 2900 Ø 139 mm Three-phase 400/690 V - 50/60 HZ Ø 129 mm 10 ATEX available on request Ø 119 mm

5 Kw 7.5 HP 10 Casing B3+B5 RPM 2900 0 Three-phase 400/690 V - 50/60 HZ 0 10 20 30 40 50 60 70 80 ATEX available on request Flow rate (m3/h)

The curves and the performances refer to pumps with immersed suction and open delivery outlet, with water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm).

80 81 MB Line introduction MB 80 HORIZONTAL CENTRIFUGAL PUMPS Specifications and types The horizontal centrifugal pumps with a resin casing, They are available in two version with different internal are driven by a direct drive electric motor (max 3000 mechanical seal, based on their use, TL (lip seal) and RPM) to transfer and/or empty liquids quickly, with TS (bellows seal). flow rates from 6 to 75 m3/hour. Suction fittings G 1”1/2 f or DN 40 They are driven by the impeller that, integrated with Delivery fittings G 1” m or DN 25 Their unique open impeller design allows them to pump the shaft and the electric motor (direct drive), is rotated Max flow rate 6 m3/h even very dirty fluids with an apparent viscosity up to creating, due to centrifugal effect, a suction on the cen- mMax7.5 head Viscosity up to 500 cps 500 cps (at 20°C) and small-sized suspended solids. tral duct and a delivery on the peripheral duct. PUMPS CENTRIFUGAL HORIZONTAL Standard open impeller Ø 85 mm H 9 mm * Passing solids Ø max 5 mm

* Special versions are available on request for the fluid pumped Product designed and constructed in Italy Constructed in polypropylene or PVDF

Under head use 8 PP Weld-free 7 Usable with fluids containing suspended solids 6 Extremely easy to maintain 5 Suitable for continuous use Head (m) Available with: 4 - Mechanical bellows seal (new generation "Self-locking" system) 3

Aisi 304 spring - Seal ring in SILICON CARBIDE + CERAMIC / SILICON CARBIDE + SILICON CARBIDE 2

® - Lip seal: VITON or EPDM 1

0 PVDF 0 1 2 3 4 5 6 7 MB PUMPS CODES ENCODING Flow rate (m³/h) The curves and the performances refer to pumps with immersed suction and open delivery outlet, with ex. MB080--P-TLVN water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). MB 80 PP, Viton® lip seal, three-phase motor.

MB80 P TLV N Pump casing construction material, operating temperature and net weight PUMP MODEL MATERIAL TYPE OF SEAL MOTOR Polypropylene (with glass additive) 1.7 Kg* CASING Max 3°C min. ® - Three-phase MB 80 - MB 80 P - Polypropylene TLV - Viton lip seal N* 65°C max MB 100 - MB 100 motor FC - PVDF+CF TLD - EPDM lip seal MB 110 - MB 110 ® - Single-phase TSV - Viton bellows seal M PVDF (with carbon additive) 2.2 Kg* MB 120 - MB 120 motorA - ATEX motor Max 3°C min. MB 130 - MB 130 TSD - EPDM bellows seal MB 140 - MB 140 95°C max MB 150 - MB 150 * The weights refer to the pump without the motor MB 155 - MB 155 MB 160 - MB 160 Standard electric motor: MB 180 - MB 180 Kw 0.37 HP 0.5 Box B3 + B14 MAIN APPLICATION SECTORS RPM 2900

* Three-phase asynchronous eurotension motor fitted as standard (2 poles) 50Hz THREE-PHASE 230/400 V 50/60 Hz 2 poles AUTOMOTIVE CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC INDUSTRY TREATMENT INDUSTRY IE1 efficiency class IP55 protection rating Ambient temperature -30°C + 45°C Aluminium/Cast iron SINGLE-PHASE on request ATEX on request 82 83 MB 100 MB 110

Specifications and types Specifications and types

Suction fittings G 1”1/2 f or DN 40 Suction fittings G 2” m or DN 50 Delivery fittings G 1” m or DN 25 Delivery fittings G 1”1/2 m or DN 40 Max flow rate 9 m3/h Max flow rate 20 m3/h Max head 10.5 m mMax15 head Viscosity up to 500 cps Viscosity up to 500 cps HORIZONTAL CENTRIFUGAL PUMPS CENTRIFUGAL HORIZONTAL Standard open impeller Ø 97 mm H 12 mm * Standard open impeller Ø 130 mm H 4 mm * Passing solids Ø max 7 mm Passing solids Ø max 2 mm

* Special versions are available on request for the fluid pumped * Special versions are available on request for the fluid pumped

12 PP 16 PP

14 10

8 10 Head (m) 6 Head (m) 8

6 4

2 2

0 PVDF 0 PVDF 0 2 4 6 8 10 12 0 5 10 15 20 25

Flow rate (m³/h) Flow rate (m³/h)

The curves and the performances refer to pumps with immersed suction and open delivery outlet, with The curves and the performances refer to pumps with immersed suction and open delivery outlet, with water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm).

Pump casing construction material, operating temperature and net weight Pump casing construction material, operating temperature and net weight Polypropylene (with glass additive) 1.7 Kg* Polypropylene (with glass additive) 3.4 Kg* Max 3°C min. Max 3°C min. 65°C max 65°C max

PVDF (with carbon additive) 2.2 Kg* PVDF (with carbon additive) 4.3 Kg* Max 3°C min. Max 3°C min. 95°C max 95°C max * The weights refer to the pump without the motor * The weights refer to the pump without the motor

Standard electric motor: Standard electric motor: Kw 0.55 Kw 1.1 HP 0.75 HP 1.5 Box B3 + B14 MAIN APPLICATION SECTORS Box B3 + B5 MAIN APPLICATION SECTORS RPM 2900 RPM 2900 THREE-PHASE 230/400 V THREE-PHASE 230/400 V 50/60 Hz 50/60 Hz 2 poles AUTOMOTIVE CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC 2 poles AUTOMOTIVE CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC INDUSTRY TREATMENT INDUSTRY INDUSTRY TREATMENT INDUSTRY IE1 efficiency class IE3 efficiency class IP55 protection rating IP55 protection rating Ambient temperature -30°C + 45°C Ambient temperature -30°C + 45°C Aluminium/Cast iron Aluminium/Cast iron SINGLE-PHASE on request SINGLE-PHASE on request ATEX on request ATEX on request 84 85 MB 120 MB 130

Specifications and types Specifications and types

Suction fittings G 2” m or DN 50 Suction fittings G 2” m or DN 50 Delivery fittings G 1”1/2 m or DN 40 Delivery fittings G 1”1/2 m or DN 40 Max flow rate 25 m3/h Max flow rate 30 m3/h 15 mMax15 head mMax20 head Viscosity up to 500 cps Viscosity up to 500 cps HORIZONTAL CENTRIFUGAL PUMPS CENTRIFUGAL HORIZONTAL Standard open impeller Ø 120 mm H 8 mm * Standard open impeller Ø 130 mm H 8 mm * Passing solids Ø max 6 mm Passing solids Ø max 6 mm

* Special versions are available on request for the fluid pumped * Special versions are available on request for the fluid pumped

25 18 PP PP

16 20 14

12 15

10 Head (m) Head (m)

8 10

4 5

0 0 PVDF PVDF 0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35 40 Flow rate (m³/h) Flow rate (m³/h)

Pump casing construction material, operating temperature and net weight Pump casing construction material, operating temperature and net weight Polypropylene (with glass additive) 3.8 Kg* Polypropylene (with glass additive) 3.8 Kg* Max 3°C min. Max 3°C min. 65°C max 65°C max

PVDF (with carbon additive) 4.9 Kg* PVDF (with carbon additive) 4.9 Kg* Max 3°C min. Max 3°C min. 95°C max 95°C max * The weights refer to the pump without the motor * The weights refer to the pump without the motor

Standard electric motor: Standard electric motor: Kw 1.5 Kw 2.2 HP 2 HP 3 Box B3 + B5 MAIN APPLICATION SECTORS Box B3 + B5 MAIN APPLICATION SECTORS RPM 2900 RPM 2900 THREE-PHASE 230/400 V THREE-PHASE 230/400 V 50/60 Hz 50/60 Hz 2 poles AUTOMOTIVE CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC 2 poles CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC INDUSTRY TREATMENT INDUSTRY INDUSTRY TREATMENT INDUSTRY IE3 efficiency class IE3 efficiency class IP55 protection rating IP55 protection rating Ambient temperature -30°C + 45°C Ambient temperature -30°C + 45°C Aluminium/Cast iron Aluminium/Cast iron SINGLE-PHASE on request SINGLE-PHASE on request ATEX on request ATEX on request 86 87 MB 140 MB 150

Specifications and types Specifications and types

Suction fittings G 2” m or DN 50 Suction fittings G 2”1/2 f or DN 65 Delivery fittings G 1”1/2 m or DN 40 Delivery fittings G 2” m or DN 50 Max flow rate 40 m3/h Max flow rate 42 m3/h 21 mMax21 head mMax24 head Viscosity up to 500 cps Viscosity up to 500 cps HORIZONTAL CENTRIFUGAL PUMPS CENTRIFUGAL HORIZONTAL Standard open impeller Ø 130 mm H 14 mm * Standard open impeller Ø 160 mm H 5.5 mm -10° * Passing solids Ø max 12 mm Passing solids Ø max 2 mm

* Special versions are available on request for the fluid pumped * Special versions are available on request for the fluid pumped

25 PP 30 PP

25 20

20 15 Head (m) Head (m) 15

10 10

5 5

0 0 0 5 10 15 20 25 30 35 40 45 50 PVDF 0 10 20 30 40 50 60 PVDF

Flow rate (m³/h) Flow rate (m³/h)

Pump casing construction material, operating temperature and net weight Pump casing construction material, operating temperature and net weight Polypropylene (with glass additive) 4 Kg* Polypropylene (with glass additive) 8.1 Kg* Max 3°C min. Max 3°C min. 65°C max 65°C max

PVDF (with carbon additive) 5 Kg* PVDF (with carbon additive) 11 Kg* Max 3°C min. Max 3°C min. 95°C max 95°C max * The weights refer to the pump without the motor * The weights refer to the pump without the motor

Standard electric motor: Standard electric motor: Kw 3 Kw 4 HP 4 HP 5.5 Box B3 + B14 MAIN APPLICATION SECTORS Box B3 + B5 MAIN APPLICATION SECTORS RPM 2900 RPM 2900 THREE-PHASE 230/400 V THREE-PHASE 230/400 V 50/60 Hz 50/60 Hz 2 poles AUTOMOTIVE CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC 2 poles CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC INDUSTRY TREATMENT INDUSTRY INDUSTRY TREATMENT INDUSTRY IE3 efficiency class IE3 efficiency class IP55 protection rating IP55 protection rating Ambient temperature -30°C + 45°C Ambient temperature -30°C + 45°C Aluminium/Cast iron Aluminium/Cast iron SINGLE-PHASE on request ATEX on request ATEX on request 88 89 MB 155 MB 160

Specifications and types Specifications and types

Suction fittings G 2”1/2 f or DN 65 Suction fittings G 2”1/2 f or DN 65 Delivery fittings G 2” m or DN 50 Delivery fittings G 2” m or DN 50 Max flow rate 50 m3/h Max flow rate 55 m3/h 27 mMax27 head mMax32 head Viscosity up to 500 cps Viscosity up to 500 cps HORIZONTAL CENTRIFUGAL PUMPS CENTRIFUGAL HORIZONTAL Standard open impeller Ø 162 mm H 4 mm -10 ° * Standard open impeller Ø 162 mm H 11 mm -10° * Passing solids Ø max 3 mm Passing solids Ø max 9 mm

* Special versions are available on request for the fluid pumped * Special versions are available on request for the fluid pumped

30 PP 35 PP

30 25

25 20

20 Head (m) 15 Head (m) 15

10 10

5 5

0 0 0 10 20 30 40 50 60 PVDF 0 10 20 30 40 50 60 70 PVDF Flow rate (m³/h) Flow rate (m³/h)

Pump casing construction material, operating temperature and net weight Pump casing construction material, operating temperature and net weight Polypropylene (with glass additive) 9.5 Kg* Polypropylene (with glass additive) 9.8 Kg* Max 3°C min. Max 3°C min. 65°C max 65°C max

PVDF (with carbon additive) 12.4 Kg* PVDF (with carbon additive) 12.2 Kg* Max 3°C min. Max 3°C min. 95°C max 95°C max * The weights refer to the pump without the motor * The weights refer to the pump without the motor

Standard electric motor: Standard electric motor: Kw 5.5 Kw 7.5 HP 7.5 HP 10 Box B3 + B5 MAIN APPLICATION SECTORS Box B3 + B5 MAIN APPLICATION SECTORS RPM 2900 RPM 2900 THREE-PHASE 400/690 V THREE-PHASE 400/690 V 50/60 Hz 50/60 Hz 2 poles CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC 2 poles CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC INDUSTRY TREATMENT INDUSTRY INDUSTRY TREATMENT INDUSTRY IE3 efficiency class IE3 efficiency class IP55 protection rating IP55 protection rating Ambient temperature -30°C + 45°C Ambient temperature -30°C + 45°C Aluminium/Cast iron Aluminium/Cast iron ATEX on request ATEX on request

90 91 MB 180 MB HORIZONTAL CENTRIFUGAL PUMPS

Specifications and types TL = lip seal

Suction fittings G 2”1/2 f or DN 65 Delivery fittings G 2” m or DN 50 Pump Motor power Max flow rate 75 m3/h 38 mMax38 head MB 80 0.37 Kw - 0.5 HP Viscosity up to 500 cps HORIZONTAL CENTRIFUGAL PUMPS CENTRIFUGAL HORIZONTAL Standard open impeller Ø 176mm H 15 mm -10 ° * MB 100 0.55 Kw - 0.75 HP Passing solids Ø max 9 mm

* Special versions are available on request for the fluid pumped MB 110 1.1 Kw - 1.5 HP

MB 120 1.5 Kw - 2 HP

40 PP MB 130 2.2 Kw - 3 HP

35 TS = bellows seal MB 140 3 Kw - 4 HP

30 MB 150 4 Kw - 5.5 HP

25 MB 155 5.5 Kw - 7.5 HP

Head (m) 20 MB 160 7.5 Kw - 10 HP 15 MB 180 11 Kw - 15 HP 10

0 0 10 20 30 40 50 60 70 80 90 PVDF Flow rate (m³/h)

The curves and the performances refer to pumps with immersed suction and open delivery outlet, with water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). A B C D E F

Pump casing construction material, operating temperature and net weight Polypropylene (with glass additive) 9.9 Kg* Max 3°C min. 65°C max

PVDF (with carbon additive) 12.2 Kg* Max 3°C min. 95°C max * The weights refer to the pump without the motor

Standard electric motor: A = electric motor Kw 11 B = inspection lantern HP 15 C = mechanical seal Box B3 + B5 MAIN APPLICATION SECTORS D = impeller RPM 2900 E = delivery duct THREE-PHASE 400/690 V F = suction duct 50/60 Hz 2 poles CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC INDUSTRY TREATMENT INDUSTRY IE3 efficiency class IP55 protection rating Ambient temperature -30°C + 45°C Aluminium/Cast iron ATEX on request

92 93 IM Line introduction IM 80 VERTICAL CENTRIFUGAL PUMPS Specifications and types The IM series vertical centrifugal pumps with a resin fluids with an apparent viscosity up to 500 cps (at 20°C) casing, are high performance pumps for fixed instal- and small-sized suspended solids. The vast range of lations with the pump immersed directly in the tank. construction materials available for the pump allows us They are driven by a direct drive electric motor (max to select the best chemical compatibility with the fluid Suction fittings G 1”1/2 f or DN 40 3000 RPM) to quickly empty the fluid, with flow rates and/or the environment, without neglecting the correct Delivery fittings G 1” m or DN 25 from 6 to 170 m3/hour and head up to 40 m. temperature range. Max flow rate 6 m3/h 7.5 mMax7.5 head VERTICAL CENTRIFUGAL PUMPS CENTRIFUGAL VERTICAL The unique construction shape of this type of pump, as well They are driven by the impeller that, integrated with the Viscosity up to 500 cps as not using internal mechanical seals (subject to consid- shaft and the electric motor (direct drive), is rotated at Standard open impeller Ø 85 mm H 9 mm * erable wear), guarantees the collection in the tank of any a set speed creating, due to centrifugal effect, a suc- Passing solids Ø max 7 mm accidental spillages of fluid. The open impeller design al- tion on the central duct and a delivery on the peripheral * Special versions are available on request for the fluid pumped lows them to pump (in continuous flow) even very dirty duct.

Standard electric motor: Product designed and constructed in Italy 8 Kw 0.37 HP 0.5 Constructed in polypropylene or PVDF 7 Box B5 Normalised electric motor 6 RPM 2900 Support lantern and connection between pump and motor with a flexible coupling THREE-PHASE 230/400 V 5 50/60 Hz Usable with fluids containing suspended solids 2 poles Head (m) 4 Suitable for continuous use IE1 efficiency class 3 IP55 protection rating Ambient temperature -30°C + 45°C 2 Aluminium/Cast iron SINGLE-PHASE on request 1 ATEX on request

0 0 1 2 3 4 5 6 7 8 Column length PP* weight PVDF* weight Flow rate (m³/h) 250 6.5 Kg 7 Kg The curves and the performances refer to pumps with immersed suction and open delivery outlet, with water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). 500 7.5 Kg 8 Kg 800 10.5 Kg 11 Kg 1000**

* The weights refer to the pump without the motor IM PUMPS CODES ENCODING PP PVDF ** Special version Operating temperature: ex.IM140P-V-0800-N IM140 PP, O-Ring Viton®, altezza colonna 800 mm, motore trifase PP from +3°C to +65°C PVDF from +3°C to +95°C

IM140 P V 0800 N

PUMP MODEL PUMP O-RING COLUMN MOTOR MATERIAL HEIGHT

0250 - 250 - Three-phase IM 80 - IM 80 P - Polypropylene D - EPDM N* IM 90 - IM 90 ® mm** motor FC - PVDF+CF V - Viton IM 95 - IM 95 0500 - 500 mm M - Single-phase MAIN APPLICATION SECTORS IM 110 0800 - 800 mm - IM 110 motorA - ATEX motor IM 120 - IM 120 1000 - 1000 IM 130 - IM 130 mm IM 140 - IM 140 1250 - 1250 IM 150 - IM 150 mm IM 155 - IM 155 IM 160 - IM 160 CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC IM 180 - IM 180 INDUSTRY TREATMENT INDUSTRY IM 200 - IM 200

* Three-phase asynchronous eurotension motor fitted as standard (2 poles) 50Hz ** Available only for IM 80/90 pumps

94 95 IM 90 IM 95

Specifications and types Specifications and types

Suction fittings G 1”1/2 f or DN 40 on request Suction fittings G 2” m or DN 50 on request Delivery fittings G 1” m or DN 25 on request Delivery fittings G 1”1/2 m or DN 40 on request Max flow rate 9 m3/h Max flow rate 13 m3/h Max head 10.5 m mMax12 head

Viscosity up to 500 cps Viscosity up to 500 cps PUMPS CENTRIFUGAL VERTICAL Standard open impeller Ø 97 mm H 12 mm * Standard open impeller Ø 100 mm H 7 mm * Passing solids Ø max 10 mm Passing solids Ø max 6 mm

* Special versions are available on request for the fluid pumped * Special versions are available on request for the fluid pumped

Standard electric motor: Standard electric motor: 12 Kw 0.55 14 Kw 0.75 HP 0.75 HP 1 12 10 Box B5 Box B5 RPM 2900 RPM 2900 THREE-PHASE 230/400 V 10 THREE-PHASE 230/400 V 8 50/60 Hz 50/60 Hz 8 2 poles 2 poles Head (m) Head (m) 6 IE3 efficiency class IE3 efficiency class 6 IP55 protection rating IP55 protection rating 4 Ambient temperature -30°C + 45°C Ambient temperature -30°C + 45°C 4 Aluminium/Cast iron Aluminium/Cast iron 2 SINGLE-PHASE on request SINGLE-PHASE on request 2 ATEX on request ATEX on request

0 0 0 2 4 6 8 10 12 0 5 10 15 20 25 Column length PP* weight PVDF* weight Column length PP* weight PVDF* weight Flow rate (m³/h) 250 6.5 Kg 7 Kg Flow rate (m³/h) 500 15 Kg 16 Kg The curves and the performances refer to pumps with immersed suction and open delivery outlet, with The curves and the performances refer to pumps with immersed suction and open delivery outlet, with water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). 500 7.5 Kg 8 Kg water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). 800 19 Kg 20 Kg 800 10.5 Kg 11 Kg 1000 22 Kg 23 Kg 1000** 1250 24 Kg 25 Kg 1400** PP PVDF * The weights refer to the pump without the motor PP PVDF ** Special version * The weights refer to the pump without the motor ** Special version

Operating temperature: PP from +3°C to +65°C PVDF from +3°C to +95°C

MAIN APPLICATION SECTORS MAIN APPLICATION SECTORS

CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONICGOLD PROCESSING CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONICGOLD PROCESSING INDUSTRY TREATMENT INDUSTRY INDUSTRY INDUSTRY TREATMENT INDUSTRY INDUSTRY

96 97 IM 110 IM 120

Specifications and types Specifications and types

Suction fittings G 2” m or DN 50 on request Suction fittings G 2” m or DN 50 on request Delivery fittings G 1”1/2 m or DN 40 on request Delivery fittings G 1”1/2 m or DN 40 on request Max flow rate 20 m3/h Max flow rate 25 m3/h 15 mMax15 head Max head 15.5 m

Viscosity up to 500 cps Viscosity up to 500 cps PUMPS CENTRIFUGAL VERTICAL Standard open impeller Ø 120 mm H 8 mm * Standard open impeller Ø 125 mm H 8 mm * Passing solids Ø max 6 mm Passing solids Ø max 6 mm

* Special versions are available on request for the fluid pumped * Special versions are available on request for the fluid pumped

Standard electric motor: Standard electric motor: 16 Kw 1.1 18 Kw 1.5 HP 1.5 HP 2 14 16 Box B5 Box B5 14 12 RPM 2900 RPM 2900 THREE-PHASE 230/400 V THREE-PHASE 230/400 V 12 10 50/60 Hz 50/60 Hz 2 poles 10 2 poles Head (m) 8 Head (m) IE3 efficiency class IE3 efficiency class 8 6 IP55 protection rating IP55 protection rating Ambient temperature -30°C + 45°C 6 Ambient temperature -30°C + 45°C 4 Aluminium/Cast iron Aluminium/Cast iron 4 SINGLE-PHASE on request SINGLE-PHASE on request 2 ATEX on request 2 ATEX on request

0 0 0 5 10 15 20 25 0 5 10 15 20 25 30 35 Column length PP* weight PVDF* weight Column length PP* weight PVDF* weight Flow rate (m³/h) 500 15 Kg 16 Kg Flow rate (m³/h) 500 15 Kg 16 Kg The curves and the performances refer to pumps with immersed suction and open delivery outlet, with 19 Kg 20 Kg The curves and the performances refer to pumps with immersed suction and open delivery outlet, with 19 Kg 20 Kg water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). 800 water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). 800 1000 22 Kg 23 Kg 1000 22 Kg 23 Kg 1250 24 Kg 25 Kg 1250 24 Kg 25 Kg PP PVDF 1400** PP PVDF 1400** * The weights refer to the pump without the motor * The weights refer to the pump without the motor ** Special version ** Special version

Operating temperature: Operating temperature: PP from +3°C to +65°C PP from +3°C to +65°C PVDF from +3°C to +95°C PVDF from +3°C to +95°C

MAIN APPLICATION SECTORS MAIN APPLICATION SECTORS

98 99 IM 130 IM 140

Specifications and types Specifications and types

Suction fittings G 2” m or DN 50 on request Suction fittings G 2” m or DN 50 on request Delivery fittings G 1”1/2 m or DN 40 on request Delivery fittings G 1”1/2 m or DN 40 on request Max flow rate 30 m3/h Max flow rate 40 m3/h 20 mMax20 head mMax21 head

Viscosity up to 500 cps Viscosity up to 500 cps PUMPS CENTRIFUGAL VERTICAL Standard open impeller Ø 130 mm H 8 mm * Standard open impeller Ø 130 mm H 14 mm * Passing solids Ø max 6 mm Passing solids Ø max 12 mm

* Special versions are available on request for the fluid pumped * Special versions are available on request for the fluid pumped

Standard electric motor: Standard electric motor: 25 Kw 2.2 25 Kw 3 HP 3 HP 4 Box B5 Box B5 20 20 RPM 2900 RPM 2900 THREE-PHASE 230/400 V THREE-PHASE 230/400 V

15 50/60 Hz 15 50/60 Hz 2 poles 2 poles Head (m) Head (m) IE3 efficiency class IE3 efficiency class 10 IP55 protection rating 10 IP55 protection rating Ambient temperature -30°C + 45°C Ambient temperature -30°C + 45°C Aluminium/Cast iron Aluminium/Cast iron 5 5 SINGLE-PHASE on request SINGLE-PHASE on request ATEX on request ATEX on request

0 0 0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40 45 50 Column length PP* weight PVDF* weight Column length PP* weight PVDF* weight Flow rate (m³/h) 500 15 Kg 16 Kg Flow rate (m³/h) 500 15 Kg 16 Kg The curves and the performances refer to pumps with immersed suction and open delivery outlet, with 19 Kg 20 Kg The curves and the performances refer to pumps with immersed suction and open delivery outlet, with 19 Kg 20 Kg water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). 800 water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). 800 1000 22 Kg 23 Kg 1000 22 Kg 23 Kg 1250 24 Kg 25 Kg 1250 24 Kg 25 Kg PP PVDF 1400** PP PVDF 1400** * The weights refer to the pump without the motor * The weights refer to the pump without the motor ** Special version ** Special version

Operating temperature: Operating temperature: PP from +3°C to +65°C PP from +3°C to +65°C PVDF from +3°C to +95°C PVDF from +3°C to +95°C

MAIN APPLICATION SECTORS MAIN APPLICATION SECTORS

CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONICGOLD PROCESSING CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC INDUSTRY TREATMENT INDUSTRY INDUSTRY INDUSTRY TREATMENT INDUSTRY

100 101 IM 150 IM 155

Specifications and types Specifications and types

Suction fittings G 2”1/2 f or DN 65 on request Suction fittings G 2”1/2 f or DN 65 on request Delivery fittings G 2” m or DN 50 on request Delivery fittings G 2” m or DN 50 on request Max flow rate 42 m3/h Max flow rate 42 m3/h 24 mMax24 head mMax27 head

Viscosity up to 500 cps Viscosity up to 500 cps PUMPS CENTRIFUGAL VERTICAL Standard open impeller Ø 160 mm H 4 mm -10° * Standard open impeller Ø 162 mm H 4 mm -10° * Passing solids Ø max 2 mm Passing solids Ø max 2 mm

* Special versions are available on request for the fluid pumped * Special versions are available on request for the fluid pumped

Standard electric motor: Standard electric motor: 30 Kw 4 30 Kw 5.5 HP 5.5 HP 7.5

25 Box B5 25 Box B5 RPM 2900 RPM 2900 THREE-PHASE 230/400 V THREE-PHASE 400/690 V 20 20 50/60 Hz 50/60 Hz 2 poles 2 poles Head (m) Head (m) 15 15 IE3 efficiency class IE3 efficiency class IP55 protection rating IP55 protection rating 10 Ambient temperature -30°C 10 Ambient temperature -30°C + 45°C + 45°C

5 Aluminium/Cast iron on request 5 Aluminium/Cast iron on request ATEX ATEX

0 0 0 10 20 30 40 50 60 Column length PP* weight PVDF* weight 0 10 20 30 40 50 60 Column length PP* weight PVDF* weight 500 28 Kg 30 Kg 500 28 Kg 30 Kg Flow rate (m³/h) Flow rate (m³/h) 31 Kg 33 Kg 31 Kg 33 Kg The curves and the performances refer to pumps with immersed suction and open delivery outlet, with 800 The curves and the performances refer to pumps with immersed suction and open delivery outlet, with 800 water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). 1000 33 Kg 35 Kg water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). 1000 33 Kg 35 Kg 1250 36 Kg 38 Kg 1250 36 Kg 38 Kg 1400** 1400**

PP PVDF * The weights refer to the pump without the motor PP PVDF * The weights refer to the pump without the motor ** Special version ** Special version

Operating temperature: Operating temperature: PP from +3°C to +65°C PP from +3°C to +65°C PVDF from +3°C to +95°C PVDF from +3°C to +95°C

MAIN APPLICATION SECTORS MAIN APPLICATION SECTORS

CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC INDUSTRY TREATMENT INDUSTRY INDUSTRY TREATMENT INDUSTRY

102 103 IM 160 IM 180

Specifications and types Specifications and types

Suction fittings G 2”1/2 f or DN 65 on request Suction fittings G 2”1/2 f or DN 65 on request Delivery fittings G 2” m or DN 50 on request Delivery fittings G 2” m or DN 50 on request Max flow rate 55 m3/h Max flow rate 75 m3/h 32 mMax32 head mMax38 head

Viscosity up to 500 cps Viscosity up to 500 cps PUMPS CENTRIFUGAL VERTICAL Standard open impeller Ø 162 mm H 11 mm -10° * Standard open impeller Ø 176 mm H 13 mm -10° * Passing solids Ø max 9 mm Passing solids Ø max 11 mm

* Special versions are available on request for the fluid pumped * Special versions are available on request for the fluid pumped

Standard electric motor: Standard electric motor: 35 Kw 7.5 40 Kw 11 HP 10 HP 15 35 30 Box B5 Box B5

RPM 2900 30 RPM 2900 25 THREE-PHASE 400/690 V THREE-PHASE 400/690 V 50/60 Hz 25 50/60 Hz 20 2 poles 2 poles Head (m) Head (m) 20 IE3 efficiency class IE3 efficiency class 15 IP55 protection rating IP55 protection rating 15 Ambient temperature -30°C + 45°C Ambient temperature -30°C + 45°C 10 Aluminium/Cast iron 10 Aluminium/Cast iron ATEX on request ATEX on request 5 5

0 Column length PP* weight PVDF* weight 0 Column length PP* weight PVDF* weight 0 10 20 30 40 50 60 70 500 31 Kg 33 Kg 0 10 20 30 40 50 60 70 80 90 500 31 Kg 33 Kg Flow rate (m³/h) 800 34 Kg 36 Kg Flow rate (m³/h) 800 34 Kg 36 Kg The curves and the performances refer to pumps with immersed suction and open delivery outlet, with The curves and the performances refer to pumps with immersed suction and open delivery outlet, with water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). 1000 36 Kg 38 Kg water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm). 1000 36 Kg 38 Kg 1250 39 Kg 41 Kg 1250 39 Kg 41 Kg 1400** 1400** PP PVDF * The weights refer to the pump without the motor PP PVDF * The weights refer to the pump without the motor ** Special version ** Special version

Operating temperature: Operating temperature: PP from +3°C to +65°C PP from +3°C to +65°C PVDF from +3°C to +95°C PVDF from +3°C to +95°C

MAIN APPLICATION SECTORS MAIN APPLICATION SECTORS

CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC MECHANICAL CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC MECHANICAL INDUSTRY TREATMENT INDUSTRY AND METALLURGIC INDUSTRY TREATMENT INDUSTRY AND METALLURGIC INDUSTRY INDUSTRY

104 105 IM 200 IM VERTICAL CENTRIFUGAL PUMPS

Specifications and types

A Suction fittings G 3”1/2 f or DN 90 on request Delivery fittings G 3” m or DN 80 on request Max flow rate 170 m3/h 41 mMax41 head C Viscosity up to 500 cps D B PUMPS CENTRIFUGAL VERTICAL Standard open impeller Ø 175 mm H 18.4 mm * Passing solids Ø max 15 mm Available column length (mm) 800 / 1000 / 1250 I * Special versions are available on request for the fluid pumped A = electric motor B = drive coupling E C = lantern 45 D = radial bearing E = outer column Standard electric motor: F = shaft sleeve 40 Kw 18.5 F G = ceramic bushing HP 25 H = impeller 35 I = delivery duct Box B5 G L = intake duct 30 RPM 2900 M = bushing THREE-PHASE 400/690 V Head (m) 25 50/60 Hz H 2 poles 20 IE3 efficiency class IP55 protection rating L M 15 Ambient temperature -30°C + 45°C 10 Aluminium/Cast iron on request 0 20 40 60 80 100 120 140 160 180 ATEX Flow rate (m³/h)

The curves and the performances refer to pumps with immersed suction and open delivery outlet, with Pump Motor power water at 20°C and vary based on the composition materials and 50 Hz two-pole motor (2900 rpm).

IM 80 0.37 Kw - 0.5 HP Operating temperature: PP from +3°C to +65°C PP PVDF IM 90 0.55 Kw - 0.75 HP PVDF from +3°C to +95°C

IM 95 0.75 Kw - 1 HP

IM 110 1.1 Kw - 1.5 HP

IM 120 1.5 Kw - 2 HP

IM 130 2.2 Kw - 3 HP

IM 140 3 Kw - 4 HP

IM 150 4 Kw - 5.5 HP

IM 155 5.5 Kw - 7.5 HP MAIN APPLICATION SECTORS

IM 160 7.5 Kw - 10 HP

IM 180 11 Kw - 15 HP

CHEMICAL WATER AND SLUDGE GALVANIC AND ELECTRONIC INDUSTRY TREATMENT INDUSTRY IM 200 18.5 Kw - 25 HP

106 107 108 109 TR Line introduction DRUM TRANSFER PUMPS

The drum transfer pumps consist of a dip tube, at the and with the pump immersed in the fluid. Dry-running end of which the open impeller is fitted. It is secured to or the presence of air bubbles could damage the shaft TRP - Polypropylene casing the drive shaft, connected to the pump with a ring nut. guide internal bushing. These portable drum transfer The operation consists of an impeller integrated with pumps are ideally suited for pumping corrosive fluids Dip tube Ø 42 mm the shaft, connected to the electric or pneumatic motor and work by being immersed in the liquid. Their con- Hose holder Ø 25 mm

with a coupling joint. struction shape has been designed to collect any prod- Max Operating temp. 65° C DRUM TRANSFER PUMPS The transfer pumps must be used exclusively vertically uct spillages in the drum. Total weight in Kg 1.4 for length of 900 mm / 1.7 for length of 1200 mm Material Dip tube Polypropylene Material Shaft HASTELLOY or AISI 316 Product designed and constructed in Italy Material Impeller ECTFE Material Suction outlet Polypropylene

Portable ® Pneumatic motor Material Seal gasket in contact with the fluid - MIM Viton motor Electric Suitable for corrosive fluids Length mm 900 or 1200 Max Operating temp. from 3°C to 65°C Possibility of adjusting the flow rate (in the version with pneumatic motor) No mechanical seals Easy to disassemble Viscosity up to 900 cps Max flow rate 90 l/minute TRP - PVDF casing

Dip tube Ø 40 mm Hose holder Ø 25 mm TR PUMPS CODES ENCODING Max Operating temp. 95° C Total weight in Kg 1.6 for length of 900 mm / 1.9 for length of 1200 mm ex. TRPH1200 TR PP, Hastelloy shaft, dip tube length 1200 mm Material Dip tube PVDF Material Shaft HASTELLOY Material Impeller ECTFE TR P H 1200

PUMP MODEL MATERIAL MATERIAL LENGTH Material Suction outlet ECTFE PUMP SHAFT HOSE ® Pneumatic motor Material Seal gasket in contact with the fluid - MIM Viton motor Electric 0900- 900 mm TR - Drum transfer P - Polypropylene H - Hastelloy Length mm 900 or 1200 1200 - 1200 mm F - PVDF A - AISI 316 Max Operating temp. from 3°C to 95°C A - AISI 316

TRA - AISI 316 casing

Dip tube Ø 42.5 mm Hose holder Ø 25 mm Max Operating temp. 95° C Total weight in Kg 4.3 for length of 900 mm / 5.3 for length of 1200 mm Material Dip tube AISI 316 steel Material Shaft AISI 316 steel Material Impeller ECTFE Material Suction outlet ECTFE Material Seal gasket in contact with the fluid - MIM Viton® Length mm 900 or 1200 Pneumatic motor Electric motor Electric Max Operating temp. from 3°C to 95°C

110 111 TR - Drum transfer pumps

TR-EL SERIES - Electric motor A Drum transfer pumps with 800 Watt electric motor and open impeller that allows the continuous pumping of B clean corrosive fluids with apparent viscosity up to 900 cps. The pump s fitted with a safety switch to prevent any C accidental restarts after a drop in the power supply. D Electric motors technical specifications Power 800 Watt 18 Voltage 230 V sin- DRUM TRANSFER PUMPS 16 gle-phase IP54 protection rating 14 Class F Flow rate 90 l/minute

) 12 m (

Viscosity 900 cps d a

e 10 Density 1.6 g/cm3 A = drive coupling H Weight in Kg 3.8 B = motor ring nut 8 ATEX motor on request C = bearing D = delivery duct 6 (NB: The electric cable is supplied without socket) E = dip tube Contact the sales office for information on the ATEX motor 4 F = PTFE bushing G = impeller 2 H = suction port I = shaft 0 0 20 40 60 80 100 120 Flow rate (l/min)

E F TR-PM SERIES - Pneumatic motor I Drum transfer pumps with pneumatic motor and open impeller that allows the continuous pumping of clean cor- G rosive fluids with apparent viscosity up to 600 cps. The pump allows the flow rate adjustment. H

Pneumatic motors technical specifications 12 Pneumatic motor Standard Power 0.42 HP (300 Watt) 10 Flow rate 70 l/minute MAIN APPLICATION SECTORS Viscosity 600 cps Density 1.2 g/cm3

) 8 m (

Weight in Kg 1.1 d a

e ATEX motor on request CHEMICAL GALVANIC AND ELECTRONIC

H OIL & GAS 6 AUTOMOTIVE INDUSTRY INDUSTRY Contact the sales office for information on the ATEX motor

TRA - ELECTRIC MOTOR 4 TRA - PNEUMATIC MOTOR

2 TRF - ELECTRIC MOTOR

TRF - PNEUMATIC MOTOR

0 0 10 20 30 40 50 60 70 80 90 TRP - ELECTRIC MOTOR Flow rate (l/min) TRP - PNEUMATIC MOTOR

112 113 Debem offers a wide range of accessories for all the types of pumps in its catalogue. Accessories ACCESSORIES from other manufacturers or designed and built directly by the company, which are the result of our technical experience and specific research in pump applications.

DUST PUMPS BOXER FAMILY PRESSURE BOOSTER BOXER FAMILY

The special DUST KIT lets you transform a normal BOXER In certain applications the pump has to push the product with a double diaphragm pump (normally used to pump fluids), into a higher pressure than the operating pressure (which normally ACCESSORIES pump that can aspirate various types of dust. in a system does not exceed 6-7 bar). For these situations we have designed pressure boosters with different compression ratios, according to their use. The component uses the same compressed air that feeds the pump as driving fluid.

FOOT VALVES BOXER FAMILY REINFORCEMENT RINGS BOXER FAMILY

Check valves are designed to be installed vertically at the end Steel rings press-fitted on the manifolds of the PP and PVDF of the suction pipes of centrifugal and pneumatic pumps. They pumps prevent them from breaking or being damaged when function as check valves that prevent the suction hose from connecting the pump to the circuit. emptying so that the pumps remain always primed. Sizes available: 1”, 1” ¼, 1” ½, 2”, 3”. Construction material: PP and PVDF.

TRUCK FOR BOXER PUMPS BOXER FAMILY BATCH CONTROLLER BOXER FAMILY

Equipment used to move the pump. The pump is blocked with Mechanical batch controller with 5-digit display and start/stop the fixing holes. button. Pneumatically driven it doesn't require any electrical connection. Designed to control Debem's air-operated double diaphragm pumps.

CYCLE COUNTER BOXER FAMILY AIR REGULATION KIT BOXER FAMILY

Device that is installed on the pneumatic circuit of diaphragm The kit is designed to regulate and/or set the pressure of the pumps. It measures the number of strokes performed by the compressed air. It consists of: compressed air reduction filter, diaphragms and therefore the number of cycles. This device fixing bracket, reducer, pressure gauge, Elaston hose (5 m), can be used to activate various types of controls, such as for tap and fittings. example, the litres of liquid delivered by the pump, according to its displacement capacity, and to remotely control its operation.

114 115 Debem offers a wide range of accessories for all the types of pumps in its catalogue. Accessories ACCESSORIES from other manufacturers or designed and built directly by the company, which are the result of our technical experience and specific research in pump applications.

MICROVALVES BOXER FAMILY QUICK FITTINGS BOXER FAMILY

These valves are used to manually regulate the pump air sup- Designed for the chemical sector, they provide a high level of

ply flow rate. resistance and can be used with reinforced hoses. Max operat- ACCESSORIES ing pressure 13 bar.

ANTI-VIBRATION FEET KIT BOXER FAMILY IM FILTER IM FAMILY

These help to decrease the vibrations produced by the pump Filters the suction fluid. For pumps in the IM series Construc- during its operation. tion material polypropylene and PVDF.

ELECTRICALLY OR PNEUMATICALLY DRIVEN BOXER FAMILY DISPENSERS TR FAMILY THREE WAY VALVES Built with Polypropylene, aluminium, stainless steel or PVDF. They are used to remotely switch the pump on or off. They include a lever used to control the delivery.

VALVES, FITTINGS AND PIPES BOXER - CUBIC - MB - DM - IM - TR FAMILY FLOW METERS TR FAMILY

Valves and fittings in polypropylene, PVC and stainless steel. The flow meters are installed exclusively on drum transfer High-resistance clamps for spiral hoses. Reinforced hoses pumps and are used to measure the pump's instantaneous made with food-grade PVC with metal reinforcement, designed flow rate, or the total number of litres delivered. They include to be installed on the delivery/suction side of pumps with hose a display for the reading. They are built in polypropylene or holders and locking clamps. PVDF. Hose made with polyethylene, a high density material, with a spiral, covered in rubber, to be applied on the delivery/suction side of the pump. Flexible and crushproof the hose is supplied complete with swivel fittings and plate type clamps. High chemical resistance.

FLANGE KIT BOXER - MB - DM - IM - FAMILY DIP TUBE FILTER TR FAMILY

Device that is installed on the pneumatic circuit of diaphragm Filters the suction fluid. For TR series drum transfer pumps. pumps. It measures the number of strokes performed by the Construction material polypropylene and stainless steel. diaphragms and therefore the number of cycles. This device can be used to activate various types of controls, such as for example, the litres of liquid delivered by the pump, according to its displacement capacity, and to remotely control its operation. 116 117 PUMP PROTECTION BASKET STRAINER MIXERS and PERISTALTIC PUMPS

Thanks to the large total passage surface of the bas- the chemical industry, water treatment, fish farming, ket, pump protection filters are ideally suited to be galvanic industry, leather and textile industry, paper MIXERS: E/EH/F/FR/H/J/RV installed on the suction side of the pump, to protect industry, graphic industry and many more. them from suspended solids, filaments, algae and for- Built in PP or PVDF No metal parts, Basket is easy to The compact submerged mixers are designed for a wide range of applications regardless of the shape and size eign bodies, without causing excessive drops in capac- inspect and remove, Operating pressure 1 bar. Available , of the basin. Uses: water treatment plants, biogas plants, production of liquid feedstuffs, transport vehicles, etc. ity. They can be used in industrial applications such as with the following fittings: 1” ½ f, 2” f, 2” ½ f, 3” f.

Product designed and constructed in Italy Product designed and constructed in Italy PUMPS AND PERISTALTIC BASKET STRAINER - MIXERS No metal parts Built in PP, PVDF, AISI 316 Basket is easy to inspect and remove Great versatility Built in PP and PVDF Operating pressure 1 bar MAIN APPLICATION SECTORS

MAIN APPLICATION SECTORS BOXER - MB FAMILY

WATER AND SLUDGE TREATMENT AUTOMOTIVE OIL & GAS

WATER AND SLUDGE GRAPHIC PACKING, GLUE, TREATMENT INDUSTRY PAPER AND PAPER MILLS

CHEMICAL TEXTILE AND LEATHER GALVANIC AND ELECTRONIC INDUSTRY INDUSTRY INDUSTRY

PERISTALTIC PUMPS:

Peristaltic pumps operate with a 'flowing pressure' These types of pumps are ideal in sectors such as water exerted on a flexible hose with rollers, rotating parallel treatment, chemical industry, food and cosmetics to an axis, and supported by a rollers holder. industry, mining, ceramic and building industries and in paper mills.

MAIN APPLICATION SECTORS

CERAMIC, STONE, MARBLE, WATER AND SLUDGE GLASS AND MINING PACKING, GLUE, TREATMENT INDUSTRY PAPER AND PAPER MILLS

PHARMACEUTICAL 270 CHEMICAL COSMETIC AND TRICHOLOGICAL 245 INDUSTRY INDUSTRY

INGRESSO INLET 3" GAS 330 INLET 3" GAS MADELIVERYNDATA 3" GAS

417 1 2, 272 5 0 207

400 17 7

19 235 GRADO DI FILTRAZIONE 3x7mm 118 119 120 121 Web

Visit debem.com to keep in contact with us, discover all the latest news and find out technical details www.debem.com of all our products.

+39 0331 074034

[email protected]

122 DEBEM srl Via Del Bosco, 41 - 21052 Busto Arsizio (VA) - Italy www.debem.com