DOCSLIB.ORG

Tank Truck Equipment

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Tank Truck Equipment Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5 Page. 2 / 77 T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665 email: [email protected], www.daisglobal.eu Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5 Page. 3 / 77 T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665 email: [email protected], www.daisglobal.eu TABLE OF CONTENTS I. TANK TRUCK EQUIPMENT ............................................................... 5 1.1. TRAILERS, SEMITRAILERS and RIGIT TANKS for fuels ............................. 6 1.2. Manhole covers .................................................................................. 7 1.3. Pneumatic control units ....................................................................... 9 1.4. Adapters and fittings for Bottom loading .............................................. 10 1.5. Super light ball valves ....................................................................... 12 1.6. Foot valves ...................................................................................... 12 1.7. Nozzles and parts ............................................................................. 14 1.8. Vapour recovery adapters and valves .................................................. 16 1.9. Overfill protection system LIBERTY ..................................................... 18 1.10. Compensators, sight flow, DDC .......................................................... 19 1.11. SAFETY AND CONTROL SYSTEM SCS ................................................... 21 1.12. HOSES ............................................................................................ 22 1.13. Hose reels........................................................................................ 24 1.14. Pumps and filters .............................................................................. 25 1.14.1. Spare parts for BLACKMER TXD2A ............................................................. 26 1.14.2. Spare parts for BLACKMER TXD2.5A .......................................................... 27 1.14.3. Spare parts for BLACKMER TX3 ................................................................. 28 1.14.4. Spare parts for BLACKMER TX4 ................................................................. 29 1.14.5. Spare parts for BLACKMER TXH3C ............................................................. 30 1.14.6. SPARE PARTS FOR ALFONS HAAR PUMPS ................................................... 31 1.15. Flowmeters and accesoires................................................................. 32 1.16. Manifolds ......................................................................................... 37 1.17. Grounding reels ................................................................................ 37 II. TANKS FOR LPG ............................................................................ 38 2.1. New tanks from MACOLA ................................................................... 38 2.2. Hoses for LPG ................................................................................... 39 2.3. Hose ends, nozzles for LPG ................................................................ 40 ® 2.4. Level gauge for LPG – REGO ROTOGAGES .......................................... 43 ® 2.4.1. 1” Rotogages for Large Mobile Containers ................................................. 43 ® 2.4.2. ¾” Rotogages for Small Mobile Containers ................................................ 43 2.5. Safety valves REGO .......................................................................... 44 2.6. Ball valves for LPG ............................................................................ 45 2.7. Sight flo indicators, manometers for LPG ............................................. 46 2.8. Internal foot valves for LPG and NH3 ................................................... 47 2.9. Spare parts, tools ............................................................................. 48 2.10. Flowmeters for LPG ........................................................................... 49 2.10.1. Metering systems .................................................................................... 49 2.10.2. Spare parts for LC MA7 ............................................................................ 50 2.11. Pumps and spare parts for LPG ........................................................... 51 2.11.1. Pumps ................................................................................................... 51 2.11.2. Spare parts for BLACKMER LGLD2E , LGLD3F .............................................. 52 2.11.3. Spare parts for BLACKMER – LGL 1.25/ LGL 1.5 .......................................... 53 2.11.4. Spare parts for BLACKMER LGLD4B ........................................................... 54 2.11.5. Spare parts for BLACKMER TLGLF3C .......................................................... 55 2.11.6. PUMP ALFONS HAAR GFPSC 80 912 D4 ...................................................... 56 2.12. Compensators .................................................................................. 56 2.13. Other equipment for LPG ................................................................... 56 2.14. Compressors and spare parts for LPG .................................................. 57 2.14.1. BLACKMER LB161 .................................................................................... 57 III. TANK TRUCKS FOR BITUMEN ........................................................ 58 IV. FOOD TANK TRUCKS ..................................................................... 59 4.1. ETA tank trucks for milk, wine and water ............................................. 59 4.2. Equipment for food tank trucks........................................................... 59 Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5 Page. 4 / 77 T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665 email: [email protected], www.daisglobal.eu V. CHEMICAL TANK TRUCKS .............................................................. 61 5.1. Chemical hoses ................................................................................. 61 5.2. Ball valves and butterfly valves........................................................... 62 5.3. Fittings ............................................................................................ 62 5.4. Dry dicconnect couplings ................................................................... 63 5.5. Flowmeters ...................................................................................... 63 5.6. Compensators .................................................................................. 63 5.7. Pumps and compressors .................................................................... 64 5.8. Other equipment............................................................................... 64 5.9. Seals for manhose covers .................................................................. 64 VI. BULK TANK TRUCKS ...................................................................... 65 6.1. Trailers, semitrailers ARDOR .............................................................. 65 6.2. Fittings, valves, manometers .............................................................. 65 6.3. COMPRESSORS ................................................................................. 65 6.4. Hoses .............................................................................................. 66 6.4.1. Hoses for abrasive media ......................................................................... 66 6.4.2. Hoses for hot air ..................................................................................... 67 VII. COUPLINGS ............................................................................. 68 7.1. KAMLOK .......................................................................................... 68 7.2. TW .................................................................................................. 69 7.3. GUILLEMINE ..................................................................................... 69 7.4. Safety clamps ................................................................................... 70 7.5. Reductions ....................................................................................... 70 7.6. Other fittings .................................................................................... 70 VIII. PIPES, ELBOWS, FLANGES ....................................................... 71 8.1. Flanges ............................................................................................ 71 8.2. Pipes, elbows, reductions ................................................................... 72 IX. ADR SAFETY SIGNS FOR VEHILES ................................................. 73 9.1. Standard and folding embossed panels ................................................ 73 9.2. Identifying marks for vehicles ............................................................. 74 9.3. Extinguisher holders .......................................................................... 74 9.4. Articles for ADR ................................................................................ 74 9.5. Signals in conformity of ADR regulations .............................................. 75 9.6. Rear reflecting and fluorescent trailer panels acc.ECE 70 ....................... 76 9.7. Conspicuity stripes in conformity with ECE 104 ..................................... 76 X. OTHER EQUIPMENT FROM DAIS ...................................................
Load more

Recommended publications
  • Proceedings of 1St Agria Conference on Innovative Pneumatic Vehicles – ACIPV 2017
    Proceedings of 1st Agria Conference on Innovative Pneumatic Vehicles – ACIPV 2017 May 05, 2017 Eger, Hungary Pneumobil Proceedings of the 1st Agria Conference on Innovative Pneumatic Vehicles – ACIPV 2017 May 05, 2017 Eger, Hungary Edited by Prof.Dr. László Pokorádi Published by Óbuda University, Institute of Mechatronics and Vehicle Engineering ISBN 978-963-449-022-7 Technical Sponsor: Aventics Hungary Kft. Organizer: Óbuda University, Institute of Mechatronics and Vehicle Engineering Honorary Chairs: L. Palkovics, BUTE, Budapest M. Réger, Óbuda University, Budapest Honorary Committee: I. Gödri, Aventics Hungary Kft., Eger Z. Rajnai, Óbuda University, Budapest General Chair: L. Pokorádi, Óbuda University, Budapest Scientific Program Committee Chair: J.Z. Szabó, Óbuda University, Budapest Scientific Program Committee: J. Bihari University of Miskolc Zs. Farkas Budapest University of Technology and Economics L. Fechete, Technical University of Cluj-Napoca W. Fiebig, Wroclaw University of Science and Technology D. Fodor, University of Pannonia Z. Forgó, Sapientia Hungarian University of Transylvania L. Jánosi Szent István University Gy. Juhász, University of Debrecen L. Kelemen, University of Miskolc M. Madissoo, Estonian University of Life Sciences Vilnis. Pirs, Latvian University of Agriculture K. Psiuk, Silesian University of Technology M. Simon, Universitatea Petru Maior T. Szabó Budapest University of Technology and Economics T.I. Tóth University of Szeged Organizing Committee Chair: E. Tamás, Aventics Hungary Kft., Eger Organizing Committee: A. Kriston, Aventics Hungary Kft., Eger F. Bolyki, Aventics Hungary Kft., Eger CONTENTS Gödri I.: Welcome to the Next Generation Pneumatics 1. Tóth, I.T.: Compressed Air, as an Alternative Fuel 17. Kelemen L.: Studying through the Pneumobile Competition 23. Szabó I.P.: Evolution of the Pneumobiles from Szeged 27.
    [Show full text]
  • Industrial Pumps
    INDUSTRIAL PUMPS General Catalogue Contents Who we are p. 04 Electric centrifugal pumps Why choose us p. 06 DM - Line introduction p. 74 Global network p. 08 DM 06 p. 76 Our products p. 10 DM 10 p. 77 The main application sectors p. 11 DM 15 p. 78 Conformity p. 14 DM 30 p. 79 Main advantages p. 16 KM 70 p. 80 Patented exchanger p. 18 MB - Line introduction p. 82 Long life diaphragms p. 19 MB 80 p. 83 How does it work? p. 20 MB 100 p. 84 Installations p. 21 MB 110 p. 85 MB 120 p. 86 Air-operated double diaphragm pumps MB 130 p. 87 CUBIC - Line introduction p. 22 MB 140 p. 88 CUBIC MIDGETBOX p. 23 MB 150 p. 89 CUBIC 15 p. 24 MB 155 p. 90 BOXER - Line introduction p. 26 MB 160 p. 91 BOXER 7 p. 27 MB 180 p. 92 BOXER 15 p. 28 IM - Line introduction p. 94 MICROBOXER p. 30 IM 80 p. 95 BOXER 50 / MINIBOXER p. 32 IM 90 p. 96 BOXER 81 / BOXER 90 p. 34 IM 95 p. 97 BOXER 100 p. 36 IM 110 p. 98 BOXER 150 p. 38 IM 120 p. 99 BOXER 251 / BOXER 252 p. 40 IM 130 p. 100 BOXER 522 / BOXER 502 p. 42 IM 140 p. 101 BOXER 503 p. 44 IM 150 p. 102 BOXER FPC 100 p. 46 IM 155 p. 103 RC Remote Control p. 50 IM 160 p. 104 SCUBIC p. 51 IM 180 p. 105 SMICRO p.
    [Show full text]
  • Technical Review on Study of Compressed Air Vehicle (Cav)
    International Journal of Automobile Engineering Research & Development (IJAuERD) ISSN 2277-4785 Vol. 3, Issue 1, Mar 2013, 81-90 © TJPRC Pvt. Ltd. TECHNICAL REVIEW ON STUDY OF COMPRESSED AIR VEHICLE (CAV) HEMANT KUMAR NAYAK, DEVANSHU GOSWAMI & VINAY HABLANI Department of Mechanical Engineering, Institute of Technology and Management, Sitholi, Gwalior, MP, India ABSTRACT Diesel and Petrol engine are frequently used by automobiles industries. Their impact on environment is disastrous and can’t be neglected now. In view of above, the need of some alternative fuel has been arises which lead to the development of CAVs (Compressed Air Vehicle). It is an innovative concept of using a pressurized atmospheric air up to a desired pressure to run the engine of vehicles. Manufacturing of such vehicles would be environment friendly as well as put the favorable conditions for the cost. Applications of such compressed air driven engine are in small motor cars, bikes and can be used in the vehicles to be driven for shorter distances. This technology states that, if at 20 degree C, 300 liters tank filled with air at 300 bar carries 51MJ of energy, experimentally proved. Under ideal reversible isothermal conditions, this energy could be entirely converted to mechanical work which helps the piston and finally crankshaft to rotate at desired RPM (revolutions per minute).The result shows the comparison of different properties related to CAV and FE (Fuel Engines). For example emission of toxic gases, running cost, engine efficiency, maintenance, weight aspects etc. KEYWORDS: Compressed Air Vehicle, Fuel Engine, Compressed Air Technology INTRODUCTION Compressed air has been used since the 19th century to power mine locomotives and trams in cities such as Paris and was previously the basis of naval torpedo propulsion.
    [Show full text]
  • Reelcraft Hose, Cord and Cable Reel Catalog
    Reel Catalog Hose, cord and cable reels reelcraft.com Why use hose reels? Why use hose reels? Because they make hazards will decrease, which saves lost work hose handling more efficient and safer. Your time, medical bills and higher insurance. hoses, cables and cords will last up to five You also save the expense and time to times longer. You will improve hose replace expensive hoses, cables and cords management, which decreases labor costs. that get run over by fork lifts and other Your chances of injuries from tripping vehicles. Series TW7000 Five reasons why hose reels add value Truck courtesy of E&B Paving, Anderson IN Improve efficiency Increase safety Minimize leakages Reduce hose wear Increase productivity Hoses, cable and cords are Reduce tripping accidents Reduce costs of air Hose and cords on reels can No more tangled hoses where you want/need them. and lost work time. and water leakages. last up to five times longer. improves efficiency. OSHA says reduce your trips and falls “There are many situations that may cause other wires out of the way.” OSHA’s “Fall slips, trips and falls. The controls needed Prevention Tips” include, “Practice good to prevent these hazards are usually housekeeping. Keep cords, welding leads obvious, but too often ignored, such as... and air hoses out of walkways or adjacent coiling up extension cords, lines and hoses work areas." when not in use and keeping electrical and Source: www.osha.gov Same-day quick ship program offers fastest service Because we are centrally located in the US and have three North American warehouses, upon request, we can quickly ship our standard products the same day for domestic orders of five or fewer standard models.
    [Show full text]
  • Energy Management Strategies for a Pneumatic-Hybrid Engine Based On
    Energy Management Strategies for a Pneumatic-Hybrid Engine Based on Sliding Window Pattern Recognition Andrej Ivanco, Guillaume Colin, Yann Chamaillard, Alain Charlet, Pascal Higelin To cite this version: Andrej Ivanco, Guillaume Colin, Yann Chamaillard, Alain Charlet, Pascal Higelin. Energy Manage- ment Strategies for a Pneumatic-Hybrid Engine Based on Sliding Window Pattern Recognition. Oil & Gas Science and Technology - Revue d’IFP Energies nouvelles, Institut Français du Pétrole, 2010, 65 (1), pp.179-190. 10.2516/ogst/2009045. hal-00616601 HAL Id: hal-00616601 https://hal.archives-ouvertes.fr/hal-00616601 Submitted on 28 Nov 2018 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. 15_ogst09032 18/02/10 11:51 Page 179 Oil & Gas Science and Technology – Rev. IFP, Vol. 65 (2010), No. 1, pp. 179-190 Copyright © 2009, Institut français du pétrole DOI: 10.2516/ogst/2009045 IFP International Conference Rencontres Scientifiques de l’IFP Advances in Hybrid Powertrains Évolution des motorisations hybrides Energy Management Strategies for a Pneumatic-Hybrid
    [Show full text]
  • Characteristics of Pneumatic Motors 2 TECNOLOGIE SPECIALI APPLICATE
    teCnoLoGie speCiaLi appLiCate pneumatiC motors CharaCteristiCs of pneumatiC motors 2 teCnoLoGie speCiaLi appLiCate inDiCe tsa Special technologies applied 2 CharaCteristiCs of pneumatiC motors 3 POWER 3 SPEED 3 SPEED 3 TORQUE AT MAXIMUM SPEED 3 STARTING TORQUE 3 STALL TORQUE 3 WaYs of ChanGinG THE MOTOR’s PERFORMANCE 4 PRESSURE REGULATING 4 FLOW REGULATING 4 inLet air ConDitions 4 CONSUMPTION 4 AIR QUALITY 4 air pipeLine Limitations 5 pneumatiC DiaGram (power – motor control) 5 pneumatiC aCCessories 36 air treatment units 36 manuaL or pneumatiC ControL VaLVes 37 siLenCers 38 DissoLator / siLenCer fiLter 39 our proDuCts 40 CharaCteristiCs of pneumatiC motors 1 tsa speCiaL appLieD teChnoLoGies tsa founded in 1984, for over 30 years has been designing, manufacturing and distributing pneumatic motors, articulated arms for torque reaction, assembling systems and special equipment. Its technical design office is in charge of studying all of the required characteristics to guarantee maximum reliability and high productivity, according to modern ergonomic principles. Product quality and safety are now a consolidated standard for TSA. Just-in-time deliveries, a wide, flexible range of products, including diversified motors and arms, an efficient spare parts warehouse and effective before- and after sales: these are the services offered by TSA to its customers. Thanks to its constant commitment and to the professionalism of its technicians, tsa has gained the trust of major companies on the market. Its aim is to meet customer requirements in all respects: quAlITy, PerformAnce And coST effecTIveneSS. 2 teCnoLoGie speCiaLi appLiCate CharaCteristiCs of pneumatiC motors The outlet power of a pneumatic motor varies poWer depending on its speed and torque.
    [Show full text]
  • Compressed Air Retrofit Kit for Existing Motor Vehicles
    Proceedings of the World Congress on Engineering 2013 Vol III, WCE 2013, July 3 - 5, 2013, London, U.K. Compressed Air Retrofit Kit for Existing Motor Vehicles Naveen Kumar, Utsav Banka, Manas Chitransh, Jayati Takkar, Vasu Kumar, Unish Gupta, Sushant Singh Abstract—Keeping in view the climate change, the Peak oil is the point in time when the maximum rate of dependence on petroleum reserves as the primary energy petroleum extraction is reached, after which the rate of source, and volatile fuel prices, it is imperative to explore production is expected to enter terminal decline. The oil possible opportunities in unconventional alternative-fuel crisis will begin when demand for oil consistently begins to technologies. One of the choices available is the Compressed Air Vehicle (CAV), or air car, powered by a pneumatic motor exceed supply. After the peak, demand and supply can no and on-board high-pressure gas tank. While proponents claim longer match. Keeping in view the discerning climate crisis, CAVs offer environmental and economic benefits like zero the dependence on petroleum reserves as the primary energy emissions (in fact, the exhaust air is cleaner than the ambient source, and volatile fuel prices, we have to explore possible air because of the filters used) and the cold exhaust being used opportunities in unconventional alternative-fuel for the air conditioning system, the technology has not been technologies. Compressed air as an alternative fuel can offer subject to more rigorous analysis. Also, in a compressed air engine, air alone can be used as the fuel, or it can be used in a solution to most of the aforementioned problems.
    [Show full text]
  • Modeling the Impact of Fuel Properties on Spark Ignition Engine Performance
    Modeling the impact of fuel properties on spark ignition engine performance Yuri Kroyan School of Engineering Thesis submitted for examination for the degree of Master of Science in Technology. Espoo April 26, 2018 Thesis supervisor: Prof. Martti Larmi Thesis advisor: D.Sc. (Tech.) Ossi Kaario aalto university abstract of the school of engineering master’s thesis Author: Yuri Kroyan Title: Modeling the impact of fuel properties on spark ignition engine performance Date: April 26, 2018 Language: English Number of pages: 7+85 Mechanical engineering Professorship: Martti Larmi Supervisor: Prof. Martti Larmi Advisor: D.Sc. (Tech.) Ossi Kaario Even today transport sector is heavily dependent on fossil fuels, contributing at the same time to significant part of global greenhouse gases emission. Advanced transport drop-in fuels based on renewable feedstock are the most effective way of decreasing the environmental impact of the entire sector. This work is a part of ADVANCEFUEL EU project which is aiming at the promotion of renewable transport fuels by providing new knowledge, tools, standards, and recommendations to minimize the most significant barriers towards commercialization. The main goal of this thesis is modeling the impact of fuel properties on spark ignition (SI) engine performance and carbon dioxide emissions. The results include models (based on multi-linear regression) that represent the impact of octane number, heat of vaporization, net calorific value and auto-ignition temperature on fuel consumption and carbon dioxide emissions from the end-use point of view. Modeling work was performed based on results from the driving cycles such as New European Driving Cycle (NEDC) and Worldwide harmonized Light vehicles Test Cycle (WLTC), where both input and output parameters are represented by percentage changes relative to standard gasoline fuel.
    [Show full text]
  • Results Summary for CY 2010
    Advanced Manufacturing Office IMPACTS Results Summary for CY 2010 March 2013 Table of Contents IMPACTS Table of Contents Executive Summary................................................................. 1 AMO Impacts .......................................................................... 2 Industrial Energy Use Advanced Manufacturing Office Technology Tracking Process Results Appendix A: AMO -Sponsored Technologies Commercially Available .. A-1 Appendix B: AMO Emerging Technologies ............................................. B-1 Appendix C: Historical AMO Technology Successes .............................. C-1 Appendix D: Method of Calculating Results for the IAC Program .......... D-1 Appendix E: Method of Calculating Results for Technology Deployment Program ................................................................................E-1 Appendix F: Method of Calculating Results from DOE’s Combined Heat and Power Activities .............................................................F-1 Appendix G: Methodology for Technology Tracking and Assessment of Benefits ................................................. G-1 ii DOE Advanced Manufacturing Office Executive Summary IMPACTS Manufacturing converts a wide range of raw materials, 713 trillion Btu or $5.12 billion. Cumulatively these net components, and parts into finished goods that meet market benefits correspond to about 10.7 quadrillion Btu or $56.5 expectations. The U.S. Department of Energy’s (DOE’s) billion (in 2010 dollars). Advanced Manufacturing Office (AMO) partners
    [Show full text]
  • Fabrication and Testing of Compressed Air Car Viswanadha Institute of Technology and Management
    Global Journal of Researches in Engineering Mechanical and Mechanics Engineering Volume 13 Issue 1 Version 1.0 Year 2013 Type: Double Blind Peer Reviewed International Research Journal Publisher: Global Journals Inc. (USA) Online ISSN: 2249-4596 Print ISSN:0975-5861 Fabrication and Testing of Compressed Air Car Viswanadha Institute of Technology and Management By Anirudh Addala & Srinivasu Gangada Viswanadha Institute of Technology and Management Abstract - This research aims to examine the performance of a car which takes air as the working medium. Air car is a car currently being developed which is still in the R&D stage all over the world. Review on the availability and the impact of the fossil fuels in the present and future generations led us to design a vehicle which runs by renewable energy sources. As the world is hard pressed with the energy and fuel crisis, compounded by pollution of all kinds, any technology that brings out the solution to this problem is considered as a bounty. In one of such new technologies, is the development of a new vehicle called as “Compressed Air Car”, which does not require any of the known fuels like petrol, diesel, CNG, LPG, hydrogen etc., this works on compressed air. This replaces all types of till date known fuels and also permanently solves the problem of pollution, since its exhaust is clean and cool air. Though some of the renewable energy sources like solar energy, bio fuels are currently in practice, we focused on pneumatic technology. Since pneumatic applications are wide all over the world, basic components and other equipment are easily available and the fabrication is not so tough.
    [Show full text]
  • Cylinder Engine
    the conference has been sponsored by: Copyright 2013 SAENA Positions and opinions advanced in this book are those of the authors and not necessary of SAE_NA SECTION. The author is solely responsible for the content of the paper. cover, graphic & editing: Olimpico Marco printed by: Gepal Pubblicità, Pietradefusi (AV) ISBN 978-88-907870-3-4 Conference Chairs Bianca Maria Vaglieco Istituto Motori – CNR, Napoli (Italy) Paul C. Miles Combustion Research Facility, Sandia National Laboratories, California (USA) Scientific Committe Mats Abom The Royal Institute of Technology (Sweden) Tetsuya Aizawa Meiji University (Japan) Öivind Andersson Lund University (Sweden) Francois C. Badin IFP (France) Choongsik Bae Dep. of Mech. Engineering KAIST (Korea) Michael Bargende FKFS - IVK Stuttgart University (Germany) Carlo Beatrice Istituto Motori - CNR (Italy) Dirk Bosteels AECC (Belgium) Fabio Bozza Università di Napoli Federico II (Italy) Gilles Bruneaux IFP (France) Marcello Canova CAR The Ohio State University (USA) Giuseppe Cantore University of Modena and Reggio Emilia (Italy) Felice Esposito Corcione Istituto Motori - CNR Michela Costa Istituto Motori - CNR (Italy) Jan Czerwinski University of Applied Sciences (Switzerland) Gianluca D’Errico Politecnico of Milan (Italy) Arturo de Risi Università di Lecce (Italy) John Dec Sandia National Laboratories (USA) Silvana Di Iorio Istituto Motori - CNR (Italy) Peter Eilts Technical University of Braunschweig (Germany) Alessandro Ferrari FKFS - IVK Stuttgart University (Germany) Zoran Filipi Clemson University (USA) Galen Fisher University of Michigan (USA) Stefano Fontanesi University of Modena and Reggio Emilia (Italy) David Foster ERC University of Wisconsin-Madison (USA) Hajime Fujimoto SAE Member (Japan) Agostino Gambarotta University of Parma (Italy) Jaal Ghandhi ERC University of Wisconsin-Madison (USA) Michael Grill FKFS University of Stuttgart (Germany) Christian Hasse TU Bergakademie Freiberg (Germany) Marcis Jansons Wayne State University-MI (USA) Tim Johnson Corning (USA) Rajit Johri Ford (USA) Gautam T.
    [Show full text]
  • Diesel Generator Set
    Diesel Generator Set Shandong Chaiwei Power Equipment Co., Ltd Jinan, Shandong, 250000 China Phone: +86-531-88685050 / Cell: +86 18261729837 [email protected] / www.cn-generator.com COMPANY PROFILE SHANDONG CHAIWEI POWER EQUIPMENT CO., LTD is a comprehensive high-tech enterprise in China with more than 15 years experiences, focusing on new type of environmental protection generators’ development production and sale. We have our own brand “CHARGEWE” generator set, including Diesel generator set, Biogas generator set, Nature gas generator set, Biomass generator set, Coal gas generator set etc. from 20kw to 1000kw with CE, ISO 9001:2008, SONCAP certificate, Besides we also offer the diesel engine and spare parts for gas/diesel generator set. Our products have been exported to Middle East, South America, Southeast Asia, Russia, Africa and got a high reputation on the domestic and overseas market. About the products, we have self-developed team to design and improve the generator sets to meet different customers` need. So the OEM and ODM are available. We have completed quality inspection system to make sure each product that customer get is perfect, and the professional after-sale team to guarantee your generator set be correctly installed and running normally. CHARGEWE will bring best products and service with most reasonable price for you. From the foundation of our company, we committed to leading as pioneer of the generator industry and contributing ourselves for China’s electricity industry. We believe CHARGEWE will be your best partner in generator area. CHARGEWE---- Your best choice of Energy Solution for all types of power and applications! Diesel Engine (190 type) 190 series diesel engine with high speed and big power is a series of products with meet market demand with its complete models.
    [Show full text]