Varieties and Sources of Sandstone Used in Ancient Egyptian Temples
The Journal of Ancient Egyptian Architecture vol. 1, 2016 Varieties and sources of sandstone used in Ancient Egyptian temples James A. Harrell Cite this article: J. A. Harrell, ‘Varieties and sources of sandstone used in Ancient Egyptian temples’, JAEA 1, 2016, pp. 11-37. JAEA www.egyptian-architecture.com ISSN 2472-999X Published under Creative Commons CC-BY-NC 2.0 JAEA 1, 2016, pp. 11-37. www.egyptian-architecture.com Varieties and sources of sandstone used in Ancient Egyptian temples J. A. Harrell1 From Early Dynastic times onward, limestone was the construction material of choice for An- cient Egyptian temples, pyramids, and mastabas wherever limestone bedrock occurred, that is, along the Mediterranean coast, in the northern parts of the Western and Eastern Deserts, and in the Nile Valley between Cairo and Esna (fig. 1). Sandstone bedrock is present in the Nile Valley from Esna south into Sudan as well as in the adjacent deserts, and within this region it was the only building stone employed.2 Sandstone was also imported into the Nile Valley’s limestone region as far north as el-‘Sheikh Ibada and nearby el-‘Amarna, where it was used for New Kingdom tem- ples. There are sandstone temples further north in the Bahariya and Faiyum depressions, but these were built with local materials. The first large-scale use of sandstone occurred near Edfu in Upper Egypt, where it was employed for interior pavement and wall veneer in an Early Dynastic tomb at Hierakonpolis3 and also for a small 3rd Dynasty pyramid at Naga el-Goneima.4 Apart from this latter structure, the earliest use of sandstone in monumental architecture was for Middle Kingdom temples in the Abydos-Thebes region with the outstanding example the 11th Dynasty mortuary temple of Mentuhotep II (Nebhepetre) at Deir el-Bahri.
[Show full text]