DOCSLIB.ORG

P9000 RAID Manager 01.26.02 Release Notes

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
P9000 RAID Manager 01.26.02 Release Notes HP P9000 RAID Manager 01.26.02 Release Notes HP Part Number: T1610-96040 Published: November 2011 Edition: Third © Copyright 2010, 2011 Acknowledgments Intel®, Itanium®, Pentium®, Intel Inside®, and the Intel Inside logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. UNIX® is a registered trademark of The Open Group. Version: 01.26.02 Description This package contains an update of HP P9000 RAID Manager. For all of the enhancements and fixes in this update, see the rest of this document. For the most recent hardware and operating system support, see SPOCK: http://spock.corp.hp.com/default.aspx Update recommendation Recommended Supersedes 01.25.11 Product models HP P9000 RAID Manager for HP-UX HP P9000 RAID Manager for WindowsNT HP P9000 RAID Manager for WindowsNT/x64 HP P9000 RAID Manager for Solaris HP P9000 RAID Manager for Solaris/x86 HP P9000 RAID Manager for AIX HP P9000 RAID Manager for Tru64 UNIX (Digital UNIX) HP P9000 RAID Manager for Linux HP P9000 RAID Manager for Linux/IA64 HP P9000 RAID Manager for MPE/iX HP P9000 RAID Manager for IRIX HP P9000 RAID Manager for OpenVMS HP P9000 RAID Manager for OpenVMS/IA HP P9000 RAID Manager for zLinux Devices supported HP P9X00 Disk Array: microcode 70-01-01 or later HP XP24000 Disk Array: microcode 60-01-30 or later HP XP20000 Disk Array: microcode 60-01-30 or later HP XP12000 Disk Array: microcode 50-01-06 or later HP XP10000 Disk Array: microcode 50-01-06 or later HP XP128 Disk Array: microcode 21-09-00 or later HP XP256 Disk Array: microcode 52-47-XX or later HP XP512 Disk Array: microcode 01-16-00 or higher HP XP1024 Disk Array: microcode 21-09-00 or later HP SVS200 microcode 50-09-00 or later HP XP12000 Disk Array: microcode 50-09-35 or higher HP XP24000 Disk Array: microcode 60-01-30 or higher Description 3 Operating systems Supported operating system Supported hardware HP-UX 10.20 or later HP 9000 series or HITACHI 9000 V series Windows NT 4.0 or 2000 Pentium or compatible processors Windows 2003 or 2008 Pentium, EM64T, Itanium, or compatible processors Solaris 2.5 or later Sun SPARC or Sun Ultra series Solaris 10 or later Pentium, EM64T, or compatible processors AIX 4.3 or later RS/6000 series Digital UNIX 4.0 or later AlphaServer models Tru64 UNIX 5.0 or later AlphaServer models DYNIX/ptx 4.4 or later Symmetry 5000 series Red Hat Linux AS/ES 3.0 Update 2 or later Itanium or compatible processors (with the ia32el package and Compatibility Layer disk installed) Red Hat Linux AS/ES 4.0, 5.0, or later EM64T, Itanium, or compatible processors (with the ia32el package and Compatibility Layer disk installed if on IA64) MPE/iX C.16.01 or later HP 3000 series (with patch MPEKXU3 installed for using the SCSI pass-thru driver) IRIX 6.5 or later Origin 2000 series OpenVMS 7.3-1 or later AlphaServer models (with C Run Time Library (RTL) installed) OpenVMS 8.3 or later Integrity servers SuSE Linux Enterprise Server 8 or 9 or later on Microsoft zSeries or S/390 processors Windows XP VMware ESX Server 2.5.1 or later Pentium or compatible processors Enhancements • Added an option for displaying SSB messages • Added an option for specifying CLPR# to External Groups • Added an option for specifying the Cache mode to External Groups • Added an option for displaying the reserve bits on a port • Added an option for locking Resource Groups with a user • Changed the display of tier range from hexadecimal to decimal, and added -fx option for displaying with hexadecimal • Changed a behavior for 'pairsplit -P' option so that returns with a bit of flushing on CAJ M*N configuration • Support for specifying by 16 digits of hexadecimal for the command parameter of Windows 4 Operating systems Fixes None. Prerequisites If you use the following software, install the RAID Manager/LIB that is under the ../RL directory on the CD. • BMC Enterprise Snapshot software • Remote performance monitor provided by HP • HP Omniback software • RAID management software provided by HP or other vendor Installation instructions See the following user guide for installation instructions: HP P9000 RAID Manager User Guide Part number: T1610–96039 Edition date: November 2011 Fixes 5.
Load more

Recommended publications
  • Microcode Revision Guidance August 31, 2019 MCU Recommendations
    microcode revision guidance August 31, 2019 MCU Recommendations Section 1 – Planned microcode updates • Provides details on Intel microcode updates currently planned or available and corresponding to Intel-SA-00233 published June 18, 2019. • Changes from prior revision(s) will be highlighted in yellow. Section 2 – No planned microcode updates • Products for which Intel does not plan to release microcode updates. This includes products previously identified as such. LEGEND: Production Status: • Planned – Intel is planning on releasing a MCU at a future date. • Beta – Intel has released this production signed MCU under NDA for all customers to validate. • Production – Intel has completed all validation and is authorizing customers to use this MCU in a production environment.
    [Show full text]
  • The Central Processor Unit
    Systems Architecture The Central Processing Unit The Central Processing Unit – p. 1/11 The Computer System Application High-level Language Operating System Assembly Language Machine level Microprogram Digital logic Hardware / Software Interface The Central Processing Unit – p. 2/11 CPU Structure External Memory MAR: Memory MBR: Memory Address Register Buffer Register Address Incrementer R15 / PC R11 R7 R3 R14 / LR R10 R6 R2 R13 / SP R9 R5 R1 R12 R8 R4 R0 User Registers Booth’s Multiplier Barrel IR Shifter Control Unit CPSR 32-Bit ALU The Central Processing Unit – p. 3/11 CPU Registers Internal Registers Condition Flags PC Program Counter C Carry IR Instruction Register Z Zero MAR Memory Address Register N Negative MBR Memory Buffer Register V Overflow CPSR Current Processor Status Register Internal Devices User Registers ALU Arithmetic Logic Unit Rn Register n CU Control Unit n = 0 . 15 M Memory Store SP Stack Pointer MMU Mem Management Unit LR Link Register Note that each CPU has a different set of User Registers The Central Processing Unit – p. 4/11 Current Process Status Register • Holds a number of status flags: N True if result of last operation is Negative Z True if result of last operation was Zero or equal C True if an unsigned borrow (Carry over) occurred Value of last bit shifted V True if a signed borrow (oVerflow) occurred • Current execution mode: User Normal “user” program execution mode System Privileged operating system tasks Some operations can only be preformed in a System mode The Central Processing Unit – p. 5/11 Register Transfer Language NAME Value of register or unit ← Transfer of data MAR ← PC x: Guard, only if x true hcci: MAR ← PC (field) Specific field of unit ALU(C) ← 1 (name), bit (n) or range (n:m) R0 ← MBR(0:7) Rn User Register n R0 ← MBR num Decimal number R0 ← 128 2_num Binary number R1 ← 2_0100 0001 0xnum Hexadecimal number R2 ← 0x40 M(addr) Memory Access (addr) MBR ← M(MAR) IR(field) Specified field of IR CU ← IR(op-code) ALU(field) Specified field of the ALU(C) ← 1 Arithmetic and Logic Unit The Central Processing Unit – p.
    [Show full text]
  • Pep8cpu: a Programmable Simulator for a Central Processing Unit J
    Pep8CPU: A Programmable Simulator for a Central Processing Unit J. Stanley Warford Ryan Okelberry Pepperdine University Novell 24255 Pacific Coast Highway 1800 South Novell Place Malibu, CA 90265 Provo, UT 84606 [email protected] [email protected] ABSTRACT baum [5]: application, high-order language, assembly, operating This paper presents a software simulator for a central processing system, instruction set architecture (ISA), microcode, and logic unit. The simulator features two modes of operation. In the first gate. mode, students enter individual control signals for the multiplex- For a number of years we have used an assembler/simulator for ers, function controls for the ALU, memory read/write controls, Pep/8 in the Computer Systems course to give students a hands-on register addresses, and clock pulses for the registers required for a experience at the high-order language, assembly, and ISA levels. single CPU cycle via a graphical user interface. In the second This paper presents a software package developed by an under- mode, students write a control sequence in a text window for the graduate student, now a software engineer at Novell, who took the cycles necessary to implement a single instruction set architecture Computer Organization course and was motivated to develop a (ISA) instruction. The simulator parses the sequence and allows programmable simulator at the microcode level. students to single step through its execution showing the color- Yurcik gives a survey of machine simulators [8] and maintains a coded data flow through the CPU. The paper concludes with a Web site titled Computer Architecture Simulators [9] with links to description of the use of the software in the Computer Organiza- papers and internet sources for machine simulators.
    [Show full text]
  • Reverse Engineering X86 Processor Microcode
    Reverse Engineering x86 Processor Microcode Philipp Koppe, Benjamin Kollenda, Marc Fyrbiak, Christian Kison, Robert Gawlik, Christof Paar, and Thorsten Holz, Ruhr-University Bochum https://www.usenix.org/conference/usenixsecurity17/technical-sessions/presentation/koppe This paper is included in the Proceedings of the 26th USENIX Security Symposium August 16–18, 2017 • Vancouver, BC, Canada ISBN 978-1-931971-40-9 Open access to the Proceedings of the 26th USENIX Security Symposium is sponsored by USENIX Reverse Engineering x86 Processor Microcode Philipp Koppe, Benjamin Kollenda, Marc Fyrbiak, Christian Kison, Robert Gawlik, Christof Paar, and Thorsten Holz Ruhr-Universitat¨ Bochum Abstract hardware modifications [48]. Dedicated hardware units to counter bugs are imperfect [36, 49] and involve non- Microcode is an abstraction layer on top of the phys- negligible hardware costs [8]. The infamous Pentium fdiv ical components of a CPU and present in most general- bug [62] illustrated a clear economic need for field up- purpose CPUs today. In addition to facilitate complex and dates after deployment in order to turn off defective parts vast instruction sets, it also provides an update mechanism and patch erroneous behavior. Note that the implementa- that allows CPUs to be patched in-place without requiring tion of a modern processor involves millions of lines of any special hardware. While it is well-known that CPUs HDL code [55] and verification of functional correctness are regularly updated with this mechanism, very little is for such processors is still an unsolved problem [4, 29]. known about its inner workings given that microcode and the update mechanism are proprietary and have not been Since the 1970s, x86 processor manufacturers have throughly analyzed yet.
    [Show full text]
  • Introduction to Microcoded Implementation of a CPU Architecture
    Introduction to Microcoded Implementation of a CPU Architecture N.S. Matloff, revised by D. Franklin January 30, 1999, revised March 2004 1 Microcoding Throughout the years, Microcoding has changed dramatically. The debate over simple computers vs complex computers once raged within the architecture community. In the end, the most popular microcoded computers survived for three reasons - marketshare, technological improvements, and the embracing of the principles used in simple computers. So the two eventually merged into one. To truly understand microcoding, one must understand why they were built, what they are, why they survived, and, finally, what they look like today. 1.1 Motivation Strictly speaking, the term architecture for a CPU refers only to \what the assembly language programmer" sees|the instruction set, addressing modes, and register set. For a given target architecture, i.e. the architecture we wish to build, various implementations are possible. We could have many different internal designs of the CPU chip, all of which produced the same effect, namely the same instruction set, addressing modes, etc. The different internal designs could then all be produced for the different models of that CPU, as in the familiar Intel case. The different models would have different speed capabilities, and probably different prices to the consumer. But the same machine languge program, say a .EXE file in the Intel/DOS case, would run on any CPU in the family. When desigining an instruction set architecture, there is a tradeoff between software and hardware. If you provide very few instructions, it takes more instructions to perform the same task, but the hardware can be very simple.
    [Show full text]
  • ECE 4750 Computer Architecture Topic 1: Microcoding
    ECE 4750 Computer Architecture Topic 1: Microcoding Christopher Batten School of Electrical and Computer Engineering Cornell University http://www.csl.cornell.edu/courses/ece4750 slide revision: 2013-09-01-10-42 Instruction Set Architecture Microcoded MIPS Processor Microcoding Discussion & Trends Agenda Instruction Set Architecture IBM 360 Instruction Set MIPS Instruction Set ISA to Microarchitecture Mapping Microcoded MIPS Processor Microcoded MIPS Microarchitecture #1 Microcoded MIPS Microarchitecture #2 Microcoding Discussion and Trends ECE 4750 T01: Microcoding 2 / 45 • Instruction Set Architecture • Microcoded MIPS Processor Microcoding Discussion & Trends Instruction Set Architecture I Contract between software & hardware Application Algorithm I Typically specified as all of the Programming Language programmer-visible state (registers & Operating System memory) plus the semantics of instructions Instruction Set Architecture Microarchitecture that operate on this state Register-Transfer Level IBM 360 was first line of machines to Gate Level I Circuits separate ISA from microarchitecture and Devices implementation Physics ... the structure of a computer that a machine language programmer must understand to write a correct (timing independent) program for that machine. — Amdahl, Blaauw, Brooks, 1964 ECE 4750 T01: Microcoding 3 / 45 • Instruction Set Architecture • Microcoded MIPS Processor Microcoding Discussion & Trends Compatibility Problem at IBM I By early 1960’s, IBM had several incompatible lines of computers! . Defense : 701 . Scientific : 704, 709, 7090, 7094 . Business : 702, 705, 7080 . Mid-Sized Business : 1400 . Decimal Architectures : 7070, 7072, 7074 I Each system had its own: . Instruction set . I/O system and secondary storage (tapes, drums, disks) . Assemblers, compilers, libraries, etc . Market niche ECE 4750 T01: Microcoding 4 / 45 • Instruction Set Architecture • Microcoded MIPS Processor Microcoding Discussion & Trends IBM 360: A General-Purpose Register Machine I Processor State .
    [Show full text]
  • The Implementation of Prolog Via VAX 8600 Microcode ABSTRACT
    The Implementation of Prolog via VAX 8600 Microcode Jeff Gee,Stephen W. Melvin, Yale N. Patt Computer Science Division University of California Berkeley, CA 94720 ABSTRACT VAX 8600 is a 32 bit computer designed with ECL macrocell arrays. Figure 1 shows a simplified block diagram of the 8600. We have implemented a high performance Prolog engine by The cycle time of the 8600 is 80 nanoseconds. directly executing in microcode the constructs of Warren’s Abstract Machine. The imulemention vehicle is the VAX 8600 computer. The VAX 8600 is a general purpose processor Vimal Address containing 8K words of writable control store. In our system, I each of the Warren Abstract Machine instructions is implemented as a VAX 8600 machine level instruction. Other Prolog built-ins are either implemented directly in microcode or executed by the general VAX instruction set. Initial results indicate that. our system is the fastest implementation of Prolog on a commercrally available general purpose processor. 1. Introduction Various models of execution have been investigated to attain the high performance execution of Prolog programs. Usually, Figure 1. Simplified Block Diagram of the VAX 8600 this involves compiling the Prolog program first into an intermediate form referred to as the Warren Abstract Machine (WAM) instruction set [l]. Execution of WAM instructions often follow one of two methods: they are executed directly by a The 8600 consists of six subprocessors: the EBOX. IBOX, special purpose processor, or they are software emulated via the FBOX. MBOX, Console. and UO adamer. Each of the seuarate machine language of a general purpose computer.
    [Show full text]
  • Graphical Microcode Simulator with a Reconfigurable Datapath
    Rochester Institute of Technology RIT Scholar Works Theses 12-11-2006 Graphical microcode simulator with a reconfigurable datapath Brian VanBuren Follow this and additional works at: https://scholarworks.rit.edu/theses Recommended Citation VanBuren, Brian, "Graphical microcode simulator with a reconfigurable datapath" (2006). Thesis. Rochester Institute of Technology. Accessed from This Thesis is brought to you for free and open access by RIT Scholar Works. It has been accepted for inclusion in Theses by an authorized administrator of RIT Scholar Works. For more information, please contact [email protected]. Graphical Microcode Simulator with a Reconfigurable Datapath by Brian G VanBuren A Thesis Submitted in Partial Fulfillment of the Requirements for the Degree of Master of Science in Computer Engineering Supervised by Associate Professor Dr. Muhammad Shaaban Department of Computer Engineering Kate Gleason College of Engineering Rochester Institute of Technology Rochester, New York August 2006 Approved By: Dr. Muhammad Shaaban Associate Professor Primary Adviser Dr. Roy Czernikowski Professor, Department of Computer Engineering Dr. Roy Melton Visiting Assistant Professor, Department of Computer Engineering Thesis Release Permission Form Rochester Institute of Technology Kate Gleason College of Engineering Title: Graphical Microcode Simulator with a Reconfigurable Datapath I, Brian G VanBuren, hereby grant permission to the Wallace Memorial Library repor- duce my thesis in whole or part. Brian G VanBuren Date Dedication To my son. iii Acknowledgments I would like to thank Dr. Shaaban for all his input and desire to have an update microcode simulator. I would like to thank Dr. Czernikowski for his support and methodical approach to everything. I would like to thank Dr.
    [Show full text]
  • Release History
    Release History TRACE32 Online Help TRACE32 Directory TRACE32 Index TRACE32 Technical Support ........................................................................................................... Release History ............................................................................................................................. 1 General Information ................................................................................................................... 4 Code 4 Release Information ................................................................................................................... 4 Software Release from 01-Feb-2021 5 Build 130863 5 Software Release from 01-Sep-2020 8 Build 125398 8 Software Release from 01-Feb-2020 11 Build 117056 11 Software Release from 01-Sep-2019 13 Build 112182 13 Software Release from 01-Feb-2019 16 Build 105499 16 Software Release from 01-Sep-2018 19 Build 100486 19 Software Release from 01-Feb-2018 24 Build 93173 24 Software Release from 01-Sep-2017 27 Build 88288 27 Software Release from 01-Feb-2017 32 Build 81148 32 Build 80996 33 Software Release from 01-Sep-2016 36 Build 76594 36 Software Release from 01-Feb-2016 39 Build 69655 39 Software Release from 01-Sep-2015 42 Build 65657 42 Software Release from 02-Feb-2015 45 Build 60219 45 Software Release from 01-Sep-2014 48 Build 56057 48 Software Release from 16-Feb-2014 51 ©1989-2021 Lauterbach GmbH Release History 1 Build 51144 51 Software Release from 16-Aug-2013 54 Build 50104 54 Software Release from 16-Feb-2013 56
    [Show full text]
  • In Using the GNU Compiler Collection (GCC)
    Using the GNU Compiler Collection For gcc version 6.1.0 (GCC) Richard M. Stallman and the GCC Developer Community Published by: GNU Press Website: http://www.gnupress.org a division of the General: [email protected] Free Software Foundation Orders: [email protected] 51 Franklin Street, Fifth Floor Tel 617-542-5942 Boston, MA 02110-1301 USA Fax 617-542-2652 Last printed October 2003 for GCC 3.3.1. Printed copies are available for $45 each. Copyright c 1988-2016 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with the Invariant Sections being \Funding Free Software", the Front-Cover Texts being (a) (see below), and with the Back-Cover Texts being (b) (see below). A copy of the license is included in the section entitled \GNU Free Documentation License". (a) The FSF's Front-Cover Text is: A GNU Manual (b) The FSF's Back-Cover Text is: You have freedom to copy and modify this GNU Manual, like GNU software. Copies published by the Free Software Foundation raise funds for GNU development. i Short Contents Introduction ::::::::::::::::::::::::::::::::::::::::::::: 1 1 Programming Languages Supported by GCC ::::::::::::::: 3 2 Language Standards Supported by GCC :::::::::::::::::: 5 3 GCC Command Options ::::::::::::::::::::::::::::::: 9 4 C Implementation-Defined Behavior :::::::::::::::::::: 373 5 C++ Implementation-Defined Behavior ::::::::::::::::: 381 6 Extensions to
    [Show full text]
  • Undocumented X86 Instructions to Control the CPU at the Microarchitecture Level
    UNDOCUMENTED X86 INSTRUCTIONS TO CONTROL THE CPU AT THE MICROARCHITECTURE LEVEL IN MODERN INTEL PROCESSORS Mark Ermolov Dmitry Sklyarov Positive Technologies Positive Technologies [email protected] [email protected] Maxim Goryachy independent researcher [email protected] July 7, 2021 ABSTRACT At the beginning of 2020, we discovered the Red Unlock technique that allows extracting microcode (ucode) and targeting Intel Atom CPUs. Using the technique we were able to research the internal structure of the microcode and then x86 instructions implementation. We found two undocumented x86 instructions which are intendent to control the microarhitecture for debug purposes. In this paper we are going to introduce these instructions and explain the conditions under which they can be used on public-available platforms. We believe, this is a unique opportunity for third-party researchers to better understand the x86 architecture. Disclamer. All information is provided for educational purposes only. Follow these instructions at your own risk. Neither the authors nor their employer are responsible for any direct or consequential damage or loss arising from any person or organization acting or failing to act on the basis of information contained in this paper. Keywords Intel · Microcode · Undocumented · x86 1 Introduction The existence of undocumented mechanisms in the internals of modern CPUs has always been a concern for information security researchers and ordinary users. Assuming that such mechanisms do exist, the main worry is that
    [Show full text]
  • Microcode - Idea Or Expression?, 9 Computer L.J
    The John Marshall Journal of Information Technology & Privacy Law Volume 9 Issue 1 Computer/Law Journal - Winter 1989 Article 3 Winter 1989 Microcode - Idea or Expression?, 9 Computer L.J. 61 (1989) Robert Steinberg Follow this and additional works at: https://repository.law.uic.edu/jitpl Part of the Computer Law Commons, Internet Law Commons, Privacy Law Commons, and the Science and Technology Law Commons Recommended Citation Robert Steinberg, Microcode - Idea or Expression?, 9 Computer L.J. 61 (1989) https://repository.law.uic.edu/jitpl/vol9/iss1/3 This Article is brought to you for free and open access by UIC Law Open Access Repository. It has been accepted for inclusion in The John Marshall Journal of Information Technology & Privacy Law by an authorized administrator of UIC Law Open Access Repository. For more information, please contact [email protected]. MICROCODE-IDEA OR EXPRESSION? By ROBERT STEINBERG* I. INTRODUCTION When Intel invented the first microprocessor in 1971, few people realized the implications it held for the electronics industry. From its humble beginnings on the drawing board, the microprocessor soon blos- somed into a force that created an entire new market, dramatically al- tering the landscape of computer science. One look at the present multi-billion dollar microelectronics industry and its bulging roster of 1 companies and onerns ... support[s] this contention. Although corporations in the microprocessor industry have ex- panded greatly in the last fifteen years, technological innovation in this industry has stabilized. Domestic industrial innovators, after spending millions of dollars on research, are now facing competition from foreign corporations that copy and reproduce their technology.
    [Show full text]