DOCSLIB.ORG

LABORATORY SAFETY and CHEMICAL HYGIENE PLAN

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
LABORATORY SAFETY and CHEMICAL HYGIENE PLAN LABORATORY SAFETY and CHEMICAL HYGIENE PLAN INDIANA UNIVERSITY Produced by University Environmental Health and Safety December 1996 in cooperation with University Chemical Hygiene Committees Revised 2015 Page 1 Table of Contents EMERGENCY INFORMATION .................................................................................................. 4 Major Emergencies............................................................................................................ 4 Minor Emergencies............................................................................................................ 4 Accident Reports ............................................................................................................... 4 Fires and Fire Alarms ........................................................................................................ 5 Tornado Watches and Warnings (Sirens) .......................................................................... 6 LABORATORY SAFETY CONTACTS ...................................................................................... 7 1. INTRODUCTION ........................................................................................................10 1.1. Purpose ................................................................................................................ 10 1.2. Regulatory Basis ................................................................................................... 10 1.3. Applicability ........................................................................................................... 11 1.4. Organization and Content ..................................................................................... 11 1.5. Definitions ............................................................................................................. 12 1.6. Authority and Responsibility .................................................................................. 14 1.7. Chemical Laboratory Inspections and Corrective Action Procedures .................... 17 2. CONTROL MEASURES .............................................................................................20 2.1. Administrative Controls ......................................................................................... 20 2.2. Procedural Controls .............................................................................................. 22 2.3. Engineering Controls ............................................................................................ 22 2.4. Personal Protective Equipment ............................................................................. 22 3. STANDARD OPERATING PROCEDURES ...............................................................25 3.1. General Laboratory Safety Procedures ................................................................. 25 3.2. Procedures for Proper Labeling, Storage, and Management of Chemicals ........... 27 3.3. Chemical Fume Hoods – Procedures for Proper and Safe Use ............................ 31 3.4. Corrosive Chemicals – Procedures for Safe Handling and Storage ...................... 33 3.5. Flammable and Combustible Liquids – Procedures for Safe Handling and Storage ................................................................................................................. 34 3.6. Oxidizing Agents – Procedures for Safe Handling and Storage............................. 36 3.7. Reactive Chemicals – Procedures for Safe Handling and Storage ........................ 37 3.8. Particularly Hazardous Substances - Procedures for Safe Handling and Storage ................................................................................................................. 40 3.9. Compressed Gases – Procedures for Safe Handling and Storage ........................ 43 3.10. Cryogenic Liquids – Procedures for Safe Handling and Storage ........................... 46 3.11. Electrical Safety Procedures ................................................................................. 48 3.12. Glassware and Sharps – Procedures for Safe Handling and Disposal .................. 49 3.13. Chemical Spill Response Procedures ................................................................... 51 3.14. Glass Apparatus and Plasticware Assembly ......................................................... 54 3.15. Solvent Stills – Procedures for Set-up, Use, and Neutralization ............................ 57 3.16. Personal Protective Equipment – Procedures for Selection and Use .................... 60 Page 2 3.17. Peroxide-Forming Chemicals and Other Time-Sensitive Materials – Procedures for Safe Handling and Management ..................................................................... 66 3.18. Nanotechnology Safety Procedures ...................................................................... 70 3.19. Hot Oil Bath and Other Heating Sources – Procedures for Set-Up and Safe Operation.............................................................................................................. 71 3.20. Chemical Allergens – Procedures for Safe Handling and Storage ......................... 74 3.21. Reproductive Toxins, Mutagens, Teratogens, and Embryotoxins – Procedures for Safe Handling and Storage .............................................................................. 75 3.22. Chemicals with Moderate Chronic and High Chronic Toxicity- Procedures for Safe Handling and Storage ................................................................................... 79 3.23. Animal Work with Chemicals of High Toxicity – Safety Procedures ....................... 82 3.24. Chemical Transportation Procedures .................................................................... 87 3.25. Laboratory Closeout Procedures ........................................................................... 88 4. TRAINING REQUIREMENTS .....................................................................................93 4.1. Required Training Content .................................................................................... 93 4.2. Training Resources ............................................................................................... 93 4.3. Training Documentation ........................................................................................ 93 5. MEDICAL CONSULATATION AND EXAMINATIONS ...............................................94 5.1. Medical Facilities .................................................................................................. 94 5.1.1. The medical care facilities and hours of operation for your respective campus can be found at IU Human Resources. ................................................................. 94 5.2. Examination Criteria .............................................................................................. 94 5.3. Information to the Physician .................................................................................. 94 5.4. Physician’s Written Opinion .................................................................................. 94 5.5. Medical Services ................................................................................................... 95 6. LABORATORY SAFETY EQUIPMENT .....................................................................95 6.1. Chemical Fume Hoods ......................................................................................... 95 6.2. Safety Showers ..................................................................................................... 96 6.3. Eyewash Stations ................................................................................................. 96 6.4. Fire Extinguishers ................................................................................................. 96 6.5. Fire Blankets ......................................................................................................... 96 6.6. Flammable Liquid Storage Cabinets ..................................................................... 97 6.7. Safety Cans .......................................................................................................... 97 6.8. Laboratory-Safe and Explosion-Proof Refrigeration Equipment ............................ 97 6.9. First Aid Kits and CPR .......................................................................................... 98 6.10. Chemical Spill Kits ................................................................................................ 98 6.11. Portable Safety Shields ......................................................................................... 99 APPENDIX A – FORMS .........................................................................................................100 APPENDIX B – REFERENCES ..................................................................................................113 Page 3 EMERGENCY INFORMATION Major Emergencies In the event of an accident in the laboratory which involves a fire, explosion, or a large release of a hazardous chemical: • Evacuate the building by activating the nearest fire alarm. • Call 911 to give the details of the accident including the location, personal injuries, and types of hazardous material involved. If the accident also involves chemical contamination or serious personal injury (e.g. profuse bleeding, broken bone, unconsciousness, immobile victim, etc.) follow the steps above and: • Move the victim from the immediate area of the fire, explosion, or spill (but only if this can be done without further
Load more

Recommended publications
  • Standardal /Z<-Z
    Hamilton Ui StandardAl HANL1r0N STNTVI) Bi;.TVGircr1h VP0FT SVHCA, 5712 1 0 L 'K-KY-o LaIUI P~FrcX.-19F TEST2 ?i0&at CONrxyhCT NO. TIAS 9-8159 NASA Aid!,zj.. SACECAFT CF.CErR ,_eb-r 1970 Prepared Byi/kA / 70 L.A. Wilis, axrer.mwtal Enineer Pae Aproved ByA1"" /Z<-Z -;' W. A. Blezhcr0 Chiet Pa tc Advanced -nginee.rin­ ONUMBE) AHRU) U NASA CR OR ?MX OR AD NUMBER) (CATEGORY) Hamilton L Standard cnisni _ This report contairs test results defining the operating chsractcristics of lithin peroxide to the extcnt required to quantify system level ponalties. The effects of chemical caulysts, bed cooling, che.,ical Panufacturing tech­ uiques, opera ing conditions, and cheaica) handling jroc Curea are evaluated. ii! StandardHamilton i5U TAlBLE OF CO_&E!PS Section me No. 1.0 SUMM4ARY 1 2 .0 INTRODUCTION 3 3.0 PROGRAM DEFINITION 3.1 Program Objectives 4 3.2 Test Objectives 4 3.3 Program Description 5 3.4 Test Conitions T 3.5 Test Facility 7 3.6 - Test Hardware 12 3.7 Planned Test Sequence 18 3.8 Test.Results 21 ho TEST DATA PRESENTATION 22 4.1 Performance Data 22 4.2 Chemical Analysis Data 1o6 5.0 PERFOrd4ICE ANALYSIS 109 5.1 Catalyst Evaluation 109 5.2 Bed Cooling Evaluation 134 5.3 Procedural Test Evaluation 0h5 5.4 Off Design Test Evaluation 153 5.5 End Item Canister Evaluation 157 5.6 Li 2O2 System Penalty Evaluation 163 6.0 RECOM ENDED FUTURE EFFORT 165 7.0 APPENDIX 167 7.1 Specification for Lithium Peroxide 167 Manufacturing 7.2 Specification for Lithium Peroxide Storage a68 7.3 Specification for Lithium Peroxide 170 Cartridge Loading iv Standard 5712 LIST OP TABLFS Table No.
    [Show full text]
  • Transport of Dangerous Goods
    ST/SG/AC.10/1/Rev.16 (Vol.I) Recommendations on the TRANSPORT OF DANGEROUS GOODS Model Regulations Volume I Sixteenth revised edition UNITED NATIONS New York and Geneva, 2009 NOTE The designations employed and the presentation of the material in this publication do not imply the expression of any opinion whatsoever on the part of the Secretariat of the United Nations concerning the legal status of any country, territory, city or area, or of its authorities, or concerning the delimitation of its frontiers or boundaries. ST/SG/AC.10/1/Rev.16 (Vol.I) Copyright © United Nations, 2009 All rights reserved. No part of this publication may, for sales purposes, be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, electrostatic, magnetic tape, mechanical, photocopying or otherwise, without prior permission in writing from the United Nations. UNITED NATIONS Sales No. E.09.VIII.2 ISBN 978-92-1-139136-7 (complete set of two volumes) ISSN 1014-5753 Volumes I and II not to be sold separately FOREWORD The Recommendations on the Transport of Dangerous Goods are addressed to governments and to the international organizations concerned with safety in the transport of dangerous goods. The first version, prepared by the United Nations Economic and Social Council's Committee of Experts on the Transport of Dangerous Goods, was published in 1956 (ST/ECA/43-E/CN.2/170). In response to developments in technology and the changing needs of users, they have been regularly amended and updated at succeeding sessions of the Committee of Experts pursuant to Resolution 645 G (XXIII) of 26 April 1957 of the Economic and Social Council and subsequent resolutions.
    [Show full text]
  • 1,45%,562 UNITED SATES P All.‘ Bl If" Til?
    Patented May 1, 1923. 1,45%,562 UNITED SATES P All.‘ bl if" til? . ROBERT E. WILSON, LEON ‘JV. PARSONS, AND STANLEY 1E. OHXSHOLIYI, OF WASHINGTON, DISTRICT OF COLUMBIA. PROCESS THE PRODUCTION OE‘ All‘HALLEAETELMLETAL PERTJIANGANATES. N0 Drawing". Application ?led September 27, 1918. Serial No. 255,975. To (all to]: am it may concern. .' manganate by oxidation or acidification, Be it known that we, Romain‘ E. lllinsou, metatheses into calcium pern'iangamite by LEON “7. Parsons, and STANLEY L. Unis treatment With calcium sulphate or milk at HoLM, citizens of the United States. and sta lime. tioned at ViTashington, District of Columbia, O'li' these four possible methods, (1.) is not 60 in the o?icc of the Director the Chemical a possible large scale method. on account l/Varfare Service, Research Division, have in of its use ot silver; (2) and are elec vented a Process for the ll’roduction oif Al trolytic methods Without a. great deal out kali-Earth-l\letal Permanpjanates, of which promise, and are to be considered elsewhere; ll) the ‘following is a speci?cation. (ll) the principal subject of this applica G3 in The present invention relates to the pro tion. duction oi? alkah» earth metal permangam Three distinct methods for preparing: ba~ nates and especially the permanganates of rium (or strontium) manganate have been calcium and magnesium as these have beenv here investigated. The ?rst of? these meth found to be very ellicient oxidizing agents ods involves heating together barium perox 70 for certain purposes, more e?icient even. than ide, hydroxide, or a salt, such as the nitrate the permanganates of the allmliearth metals.
    [Show full text]
  • United States Patent Office Patented May 26, 964 1
    3,134,646 United States Patent Office Patented May 26, 964 1. 2 3,134,646 anhydrous lithium peroxide. The rapid drying step PREPARATION 6Fiff UM PEROXIDE. serves not only to effect the removal of water added Ricardo O. Bach, Gastonia, N.C., assignor to Lithium through the water solutions of the reactants and, addi Corporation of America, inc., New York, N.Y., a cor tionally, formed in the course of the reaction, but serves, poration of Minnesota also, and quite surprisingly, to bring about the important No Drawing, Filed Jan. 5, 1962, Set. No. 166,395 function of effecting rapid transfer of the active oxygen 10 Claims. (CI. 23-184) of the hydrogen peroxide to the lithium hydroxide to consummate formation of the desired lithium peroxide. This invention relates to an improved method of pro The lithium hydroxide (which term also includes ducing substantially anhydrous lithium peroxide, and to O lithium hydroxide hydrates such as lithium hydroxide the product produced thereby. monohydrate) is most advantageously used in the form Methods for the production of substantially anhydrous of a strong to substantially saturated aqueous solution, lithium peroxide have long been known in the art. More for instance, from about 8 or 10 to 12% concentration. recently, improvements in such methods have been pro In those instances where the resulting lithium hydroxide posed as disclosed, for instance, in U.S. Patents Nos. 5 solutions contain insoluble impurities as, for instance, 2,448,485 and 2,962,358. However, each of the methods lithium carbonate, it is desirable to filter the solutions disclosed in these patents has certain significant disad to remove said impurities so as to bring about greater vantages, particularly from an economic standpoint, purity of the final substantially anhydrous lithium which make their utilization in commercial operations peroxide.
    [Show full text]
  • The Structure of Alkali Silicate Glasses and Melts: a Multi-Spectroscopic Approach
    The structure of alkali silicate glasses and melts: A multi-spectroscopic approach by Cedrick A. O'Shaughnessy A thesis submitted in conformity with the requirements for the degree of Doctor of Philosophy in Geology Graduate Department of Earth Sciences University of Toronto c Copyright 2019 by Cedrick A. O'Shaughnessy Abstract The structure of alkali silicate glasses and melts: A multi-spectroscopic approach Cedrick A. O'Shaughnessy Doctor of Philosophy in Geology Graduate Department of Earth Sciences University of Toronto 2019 The structure of alkali silicate glasses and melts is investigated using a multi-spectroscopic approach. Raman spectroscopy is used to characterize the local to intermediate range order within the glasses. We show that the distribution of rings varies as a function of composition, with 3-membered rings gaining importance with increasing alkali content. We apply a newly developed model for the fitting of the high n frequency envelope related to SiO4 symmetric stretch vibrations of Q species. These fits are interpreted using the idea of modifier bound bridging oxygen. The proportions of the different Qn species vary with alkali concentration with Q4 species breaking down to form lower order Qn species with increasing alkali 2 content. The Q peak appears at increasingly higher concentrations of M2O with increasing cation size. This leads us to believe that cations with a higher charge density cluster more readily than cations with a lower charge density. At the ∼20 mol. % composition we see a change in the silicate network, as shown by the absence of a Q4 peak and the proportion of 3-membered rings.
    [Show full text]
  • Design Guidelines for Carbon Dioxide Scrubbers I
    "NCSCTECH MAN 4110-1-83 I (REVISION A) S00 TECHNICAL MANUAL tow DESIGN GUIDELINES FOR CARBON DIOXIDE SCRUBBERS I MAY 1983 REVISED JULY 1985 Prepared by M. L. NUCKOLS, A. PURER, G. A. DEASON I OF * Approved for public release; , J 1"73 distribution unlimited NAVAL COASTAL SYSTEMS CENTER PANAMA CITY, FLORIDA 32407 85. .U 15 (O SECURITY CLASSIFICATION OF TNIS PAGE (When Data Entered) R O DOCULMENTATIONkB PAGE READ INSTRUCTIONS REPORT DOCUMENTATION~ PAGE BEFORE COMPLETING FORM 1. REPORT NUMBER 2a. GOVT AQCMCSION N (.SAECIP F.NTTSChALOG NUMBER "NCSC TECHMAN 4110-1-83 (Rev A) A, -NI ' 4. TITLE (and Subtitle) S. TYPE OF REPORT & PERIOD COVERED "Design Guidelines for Carbon Dioxide Scrubbers '" 6. PERFORMING ORG. REPORT N UMBER A' 7. AUTHOR(&) 8. CONTRACT OR GRANT NUMBER(S) M. L. Nuckols, A. Purer, and G. A. Deason 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT, PROJECT. TASK AREA 6t WORK UNIT NUMBERS Naval Coastal PanaaLSystems 3407Project CenterCty, S0394, Task Area Panama City, FL 32407210,WrUnt2 22102, Work Unit 02 II. CONTROLLING OFFICE NAME AND ADDRE1S t2. REPORT 3ATE May 1983 Rev. July 1985 13, NUMBER OF PAGES 69 14- MONI TORING AGENCY NAME & ADDRESS(if different from Controtling Office) 15. SECURITY CLASS. (of this report) UNCLASSIFIED ISa. OECL ASSI FICATION/DOWNGRADING _ __N•AEOULE 16. DISTRIBUTION STATEMENT (of thia Repott) Approved for public release; distribution unlimited. 17. DISTRIBUTION STATEMENT (of the abstract entered In Block 20, If different from Report) IS. SUPPLEMENTARY NOTES II. KEY WORDS (Continue on reverse side If noceassry and Identify by block number) Carbon Dioxide; Scrubbers; Absorption; Design; Life Support; Pressure; "Swimmer Diver; Environmental Effects; Diving., 20.
    [Show full text]
  • Hazardous Material Inventory Statement
    City of Brooklyn Park FIRE DEPARTMENT 5200 - 85th Avenue North Brooklyn Park MN 55443 Phone: (763)493-8020 Fax: (763) 493-8391 Hazardous Materials Inventory Statement Users Guide A separate inventory statement shall be provided for each building. An amended inventory statement shall be provided within 30 days of the storage of any hazardous materials or plastics that changes or adds a hazard class or which is sufficient in quantity to cause an increase in the quantity which exceeds 5 percent for any hazard class. The hazardous materials inventory statement shall list by hazard class categories. Each grouping shall provide the following information for each hazardous material listed for that group including a total quantity for each group of hazard class. 1. Hazard class. (See attached Hazardous Materials Categories Listing) 2. Common or trade name. 3. Chemical Abstract Service Number (CAS number) found in 29 Code of Federal Regulations (C.F.R.). 4. Whether the material is pure or a mixture, and whether the material is a solid, liquid or gas 5. Maximum aggregate quantity stored at any one time. 6. Maximum aggregate quantity In-Use (Open to atmosphere) at any one time. 7. Maximum aggregate quantity In-Use (Closed to atmosphere) at any one time. 8. Storage conditions related to the storage type, high-pile, encapsulated, non-encapsulated. Attached is a listing of categories that all materials need to be organized to. Definitions of these categories are also attached for your use. At the end of this packet are blank forms for completing this project. For questions regarding Hazardous Materials Inventory Statement contact the Fire Department at 763-493-8020.
    [Show full text]
  • Zllniit?Dstates Patent' ”
    , 2,962,358 zllniit?dstates Patent‘ ” ICC. Patented Nov. 29,1969 7 l . , r 2 . percent recovery of the theoretical amount of lithium peroxide available-can be obtained. 2,96%“ The drying may bedone underatmosphen'c pressure at 1 METHOD on MAKING LITHIUM PERoxmE suitable temperatures to keep decomposition of the lithium IN METHANOL peroxide at a ' ‘Ethyl alcohol can be used, as well as methanol, and Henry H. Strater, May?eld Heights, Ohio, assignor to commercial strength alcohols are satisfactory. The re 8: Chemicals, Willoughby, Ohio, a corporation action of the invention will occur at room tempera 0 o ture. No Drawing. Filed June 2, 1958, Ser. No. 738,959 10 Should it be desired to recover the lithium present in the end ?ltrate material, the ?ltrate can be heated to 4 Claims. (Cl. 23-184) distill the alcohol therein which can be recovered for further use. The water present also is evaporated o? and the residue material will have been partially con The present invention relates to a method of preparing 15 verted from lithium peroxide over to lithium hydroxide. lithium' peroxide, and particularly relates to the prepara Such end product can be puri?ed in any conventional tion of such material in an alcohol reacting medium. manner and be again used in the practice of the process, Heretofore there have been some methods proposed or it can be used for other purposes, as desired. for the production of lithium peroxide, vbut none of such The reaction conditions are readily controllable by methods have been completely satisfactory for low cost 20 the process described, as the hydrogen peroxide is slowly eifective production of lithium peroxide, so far as I am added to the reacting materials and no excessive tem aware.
    [Show full text]
  • Prohibited and Restricted Chemical List
    School Emergency Response Plan and Management Guide Prohibited and Restricted Chemical List PROHIBITED AND RESTRICTED CHEMICAL LIST Introduction After incidents of laboratory chemical contamination at several schools, DCPS, The American Association for the Advancement of Science (AAAS) and DC Fire and Emergency Management Services developed an aggressive program for chemical control to eliminate student and staff exposure to potential hazardous chemicals. Based upon this program, all principals are required to conduct a complete yearly inventory of all chemicals located at each school building to identify for the removal and disposal of any prohibited/banned chemicals. Prohibited chemicals are those that pose an inherent, immediate, and potentially life- threatening risk, injury, or impairment due to toxicity or other chemical properties to students, staff, or other occupants of the school. These chemicals are prohibited from use and/or storage at the school, and the school is prohibited from purchasing or accepting donations of such chemicals. Restricted chemicals are chemicals that are restricted by use and/or quantities. If restricted chemicals are present at the school, each storage location must be addressed in the school's written emergency plan. Also, plan maps must clearly denote the storage locations of these chemicals. Restricted chemicals—demonstration use only are a subclass in the Restricted chemicals list that are limited to instructor demonstration. Students may not participate in handling or preparation of restricted chemicals as part of a demonstration. If Restricted chemicals—demonstration use only are present at the school, each storage location must be addressed in the school's written emergency plan. Section 7: Appendices – October 2009 37 School Emergency Response Plan and Management Guide Prohibited and Restricted Chemical List Following is a table of chemicals that are Prohibited—banned, Restricted—academic curriculum use, and Restricted—demonstration use only.
    [Show full text]
  • Global Lithium Sources—Industrial Use and Future in the Electric Vehicle Industry: a Review
    resources Review Global Lithium Sources—Industrial Use and Future in the Electric Vehicle Industry: A Review Laurence Kavanagh * , Jerome Keohane, Guiomar Garcia Cabellos, Andrew Lloyd and John Cleary EnviroCORE, Department of Science and Health, Institute of Technology Carlow, Kilkenny, Road, Co., R93-V960 Carlow, Ireland; [email protected] (J.K.); [email protected] (G.G.C.); [email protected] (A.L.); [email protected] (J.C.) * Correspondence: [email protected] Received: 28 July 2018; Accepted: 11 September 2018; Published: 17 September 2018 Abstract: Lithium is a key component in green energy storage technologies and is rapidly becoming a metal of crucial importance to the European Union. The different industrial uses of lithium are discussed in this review along with a compilation of the locations of the main geological sources of lithium. An emphasis is placed on lithium’s use in lithium ion batteries and their use in the electric vehicle industry. The electric vehicle market is driving new demand for lithium resources. The expected scale-up in this sector will put pressure on current lithium supplies. The European Union has a burgeoning demand for lithium and is the second largest consumer of lithium resources. Currently, only 1–2% of worldwide lithium is produced in the European Union (Portugal). There are several lithium mineralisations scattered across Europe, the majority of which are currently undergoing mining feasibility studies. The increasing cost of lithium is driving a new global mining boom and should see many of Europe’s mineralisation’s becoming economic. The information given in this paper is a source of contextual information that can be used to support the European Union’s drive towards a low carbon economy and to develop the field of research.
    [Show full text]
  • Synthesis of Lithium Peroxide from Hydrogen Peroxide and Lithium Hydroxide in Aqueous-Organic Medium: Wasteless Technology
    MATEC Web of Conferences 96, 00004 (2017) DOI: 10.1051/ matecconf/20179600004 REE-2016 Synthesis of Lithium Peroxide from Hydrogen Peroxide and Lithium Hydroxide in Aqueous-Organic Medium: Wasteless Technology Roman Nefedov* and Yury Ferapontov Tambov State Technical University, Tambov, Russia Abstract. Lithium is a rare element, and widely used in manufacturing, electronics, medicine, and etc. One of the important lithium compounds is lithium peroxide. It is a component of regenerating products to protect the human respiratory system from damaging factors of chemical and biological nature. This paper describes the methods of obtaining the lithium peroxide. All industrial techniques for the synthesis of lithium peroxide are presented. A critical assessment of these techniques is given. A new wasteless synthesis technology of lithium peroxide from Hydrogen Peroxide and Lithium Hydroxide in Aqueous-Organic Medium is presented. This technology allows obtaining the pure product containing Li2O2 up to 94 %. The possibility of the solvent regeneration by the anhydrous lithium hydroxide has been shown. The yield of the lithium – 98 % and a significant reduction in solvent consumption per unit of finished product has been obtained. 1 Introduction The use of ethanol is not a prerequisite for obtaining lithium peroxide, although it is beneficial in terms of that The inorganic peroxide compounds based on rare, lithium peroxide contained in it unlike other organic radioactive, and especially alkali metals have a wide substances practically insoluble (dissolved in methanol range of industrial applications (e.g., energy storage and about 3.5 g/L Li2O2. Ethanol can be replaced by other oxygen source, etc.) [1, 2]. organic solvents (methanol, pyridine, propanol, kenotic An identifying characteristic of inorganic peroxide and others [12, 14]).
    [Show full text]
  • Structure of Lithium Peroxide † || ‡ ,‡ ‡ Maria K
    LETTER pubs.acs.org/JPCL Structure of Lithium Peroxide † || ‡ ,‡ ‡ Maria K. Y. Chan,† Eric L. Shirley, Naba§ K. Karan, Mahalingam Balasubramanian,* Yang Ren, Jeffrey P. Greeley, and Tim T. Fister*, † ‡ § Center for Nanoscale Materials, Advanced Photon Source, and Chemical Sciences and Engineering, Argonne National Laboratory, Argonne, Illinois 60439, United States Optical) Technology Division, National Institute of Standards and Technology, Gaithersburg, Maryland 20899, United States ABSTRACT: The reliable identification of lithium oxide species, especially lithium peroxide (Li2O2), is of vital importance to the study of Li-air batteries. ff Previous X-ray di raction studies of Li2O2 resulted in the proposal of two disparate structures by Feher and F€oppl. In this Letter, we assess these competing Li2O2 structures using a combination of the following X-ray and first-principles techniques: (i) high-energy X-ray diffraction (XRD), (ii) comparisons of the measured nonresonant inelastic X-ray scattering (NIXS) spectra with those computed from first principles using the Bethe-Salpeter equation (BSE), and (iii) comparison of thermochemistry data with the formation enthalpies obtained from density functional theory (DFT) calcula- tions using a hybrid functional. All three approaches result in the identification € ’ of Foppl s proposal as the more appropriate structure for Li2O2. The measured and computed spectra and data presented in this Letter are useful as bench- marks for future characterization of Li2O2. SECTION: Molecular Structure, Quantum Chemistry, General Theory or competition with the extremely high energy density of To distinguish between the two proposed Li2O2 structures, Ffossil fuels, electrochemical cells based on lithium-oxygen (or Cota et al.3 symmetrized both structures and used density “lithium-air”) reactions are often touted as the technological heir functional theory (DFT) calculations to determine their relative to lithium ion batteries.
    [Show full text]