DOCSLIB.ORG

Flying Cloud

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Flying Cloud sail details based on David Steel Art of Sailmaking 1796 laceing holes top rope 1.5” head cringle (HC) folded edge all sides reef bands on front leech rope side of lower sails sail edge 8” wide reef cringle (RC) leech rope rope loop reef points on lower sails length determined by yard reef cringle (RC) cringle diameter leech rope reef tackle cringle (RTC) sail edge middle band on front upper bowline cringle (UBC) rope loop side of lower sails main topgallant stuns’l 24” wide leech line cringle (LC) foot rope fore topgallant stuns’l middle bowline cringle (MBC) leach lining clue cringle lower bowline cringle (LBC) bunt line hole bunt line band 24” wide clue cringle (CC) 2” overlap or cringle (BC) on front side canvas of lower sails foot rope fore topmast stuns’l sail edge on reef band main royal stuns’l rope grommet main topmast stuns’l length of reef points on each side of sail for bottom reef points is the maximum circumference of yard - upper reef points 3” shorter 2” rope fore royal stuns’l used to shorten sail in heavy weather main skysail reef point Underhill p 116 & p150 fore skysail main royal sail main lower stuns’l fore lower stuns’l fore royal sail mizzen skysail main topgallant sail mizzen royal sail UBC LC 3” folded edge all sides all but course & top sails Campbell p 106 MBC UBC LBC fore topgallant sail LC CC MBC mizzen topgallant sail LBC CC HC 1/8 hight of sail RC main topsail yard - diameter 17” = 53” circumference fore topsail yard - diameter 15” = 47” circumference lower reef points 53” long, lower middle 50” long, lower reef points 47” long, lower middle 44” long, upper middle 47” long, top 44” long reef bands upper middle 41” long, top 38” long 1/3 canvas width main topsail topsail reef points mizzen topsail fore topsail four rows shown on the Magoun plans of the RTC Flying Cloud, in the Currrier & Ives lithograph, the Macperson painting, and in contemporary books reef tackle patch UBC RTC half distance to mizzen topsail yard - diameter 11.5” = 36” foot of sail circumference lower reef points 36” long, LC reef tackle patch lower middle 33” long, upper middle 30” UBC long, top 27” long middle band LC MBC one canvas width MBC LBC LBC 5” folded edge all CC sides Campbell p 106 CC HC 1/5 hight of sail course reef points main lower yard - diameter 23” = 72” two rows shown on the Magoun plans of the Flying Cloud, circumference lower reef points 72” in the Currrier & Ives lithograph, the Macperson painting, reef bands long, upper 69” long and in contemporary books 1/3 canvas width Cross-Jack Yard - diameter 16” = 50” fore lower yard - diameter 20” = 63” circumference circumference lower reef points 50” RTC lower reef points 63” long, upper 60” long long, upper 47” long RTC reef tackle patch half distance to reef tackle patch foot of sail cross-jack sail main course sail UBC UBC middle band one canvas width LC LC MBC fore course sail MBC LBC LBC CC CC 6” folded edge all sides 24” wide canvas, 2” overlap Campbell p 106 bunt line band bunt line hole MIZZEN SAILS MAIN SAILS FORE SAILS based on David Steel Art of Sailmaking 1796, Harold A. Underhill Masting and Rigging 1946, and George Campbell China Tea Clippers 1974. Scale 1/8” = 1’ FLYING CLOUD - TRANSVERSE SAILS FROM FRONT 10” at 1:96 2020-06-04 © Scott Bradner - 2020.
Load more

Recommended publications
  • Armed Sloop Welcome Crew Training Manual
    HMAS WELCOME ARMED SLOOP WELCOME CREW TRAINING MANUAL Discovery Center ~ Great Lakes 13268 S. West Bayshore Drive Traverse City, Michigan 49684 231-946-2647 [email protected] (c) Maritime Heritage Alliance 2011 1 1770's WELCOME History of the 1770's British Armed Sloop, WELCOME About mid 1700’s John Askin came over from Ireland to fight for the British in the American Colonies during the French and Indian War (in Europe known as the Seven Years War). When the war ended he had an opportunity to go back to Ireland, but stayed here and set up his own business. He and a partner formed a trading company that eventually went bankrupt and Askin spent over 10 years paying off his debt. He then formed a new company called the Southwest Fur Trading Company; his territory was from Montreal on the east to Minnesota on the west including all of the Northern Great Lakes. He had three boats built: Welcome, Felicity and Archange. Welcome is believed to be the first vessel he had constructed for his fur trade. Felicity and Archange were named after his daughter and wife. The origin of Welcome’s name is not known. He had two wives, a European wife in Detroit and an Indian wife up in the Straits. His wife in Detroit knew about the Indian wife and had accepted this and in turn she also made sure that all the children of his Indian wife received schooling. Felicity married a man by the name of Brush (Brush Street in Detroit is named after him).
    [Show full text]
  • The New York Sloop
    The New York Sloop The most important of the sloop-rigged small-boat types used in the fisheries was the New York sloop, which had a style of hull and rig that influenced the design of both yachts and work-boats for over thirty years. The New York boats were developed sometime in the 1830's, when the centerboard had been accepted. The boats were built all about New York Bay, particularly on the Jersey shore. The model spread rapidly, and, by the end of the Civil War, the shoal centerboard sloop of the New York style had appeared all along the shores of western Long Island Sound, in northern New Jersey, and from thence southward into Delaware and Chesapeake waters. In the postwar growth of the southern fisheries, during the 1870's and 80's, this class of sloop was adopted all along the coasts of the South Atlantic states and in the Gulf of Mexico; finally, the boats appeared at San Francisco. The model did not become very popular, however, east of Cape Cod. The New York sloop was a distinctive boat—a wide, shoal centerboarder with a rather wide, square stern and a good deal of dead rise, the midsection being a wide, shallow V with a high bilge. The working sloops usually had a rather hard bilge; but in some it was very slack, and a strongly flaring side was used. Originally, the ends were plumb, and the stem often showed a slight tumble home at the cutwater. V-sterns and short overhanging counters were gradually introduced in the 1850's, particularly in the boats over 25 feet in length on deck.
    [Show full text]
  • Sailing Course Materials Overview
    SAILING COURSE MATERIALS OVERVIEW INTRODUCTION The NCSC has an unusual ownership arrangement -- almost unique in the USA. You sail a boat jointly owned by all members of the club. The club thus has an interest in how you sail. We don't want you to crack up our boats. The club is also concerned about your safety. We have a good reputation as competent, safe sailors. We don't want you to spoil that record. Before we started this training course we had many incidents. Some examples: Ran aground in New Jersey. Stuck in the mud. Another grounding; broke the tiller. Two boats collided under the bridge. One demasted. Boats often stalled in foul current, and had to be towed in. Since we started the course the number of incidents has been significantly reduced. SAILING COURSE ARRANGEMENT This is only an elementary course in sailing. There is much to learn. We give you enough so that you can sail safely near New Castle. Sailing instruction is also provided during the sailing season on Saturdays and Sundays without appointment and in the week by appointment. This instruction is done by skippers who have agreed to be available at these times to instruct any unkeyed member who desires instruction. CHECK-OUT PROCEDURE When you "check-out" we give you a key to the sail house, and you are then free to sail at any time. No reservation is needed. But you must know how to sail before you get that key. We start with a written examination, open book, that you take at home.
    [Show full text]
  • Setting, Dousing and Furling Sails the Perception of Risk Is Very Important, Even Essential, to Organization the Sense of Adventure and the Success of Our Program
    Setting, Dousing and Furling Sails The perception of risk is very important, even essential, to Organization the sense of adventure and the success of our program. The When at sea the organization for setting and assurance of safety is essential dousing sails will be determined by the Captain to the survival of our program and the First Mate. With a large and well- and organization. The trained crew, the crew may be able to be broken balancing of these seemingly into two groups, one for the foremast and one conflicting needs is one of the for the mainmast. With small crews, it will most difficult and demanding become necessary for everyone to know and tasks you will have in working work all of the lines anywhere on the ship. In with this program. any event, particularly if watches are being set, it becomes imperative that everyone have a good understanding of all lines and maneuvers the ship may be asked to perform. Safety Sailing the brigantines safely is our primary goal and the Los Angeles Maritime Institute has an enviable safety record. We should stress, however, that these ships are NOT rides at Disneyland. These are large and powerful sailing vessels and you can be injured, or even killed, if proper procedures are not followed in a safe, orderly, and controlled fashion. As a crewmember you have as much responsibility for the safe running of these vessels as any member of the crew, including the ship’s officers. 1. When laying aloft, crewmembers should always climb and descend on the weather side of the shrouds and the bowsprit.
    [Show full text]
  • CATBOAT GUIDE and SAILING MANUAL Collected from Web Sites, Articles, Manuals, and Forum Postings
    CATBOAT GUIDE and SAILING MANUAL Collected from Web sites, articles, manuals, and forum postings Compiled and edited by: Edward Steinfeld [email protected] What I dream about. What fits my need best. ii Picnic cat by Com-Pac What I can trailer. Fisher Cat by Howard Boats iii Contents CATBOAT THESIS ...................................................................................................................1 MOORING AND DOCKING ...................................................................................................3 Docking ....................................................................................................................................................................................... 3 Docking and Mooring ............................................................................................................................................................. 4 Docking Lessons ...................................................................................................................................................................... 5 MENGER CAT 19 OWNER'S MANUAL ...............................................................................8 Stepping and Lowering the Tabernacle Mast ............................................................................................................... 8 Trailer Procedure ..................................................................................................................................................................... 9 Sailing
    [Show full text]
  • RS Tera and Thank You for Choosing an RS Product
    Rigging Manual V1 PLEASE FOLLOW RIGGING MANUAL IN THE CORRECT ORDER Contents 1. Introduction......................................................... 1 2. Technical data.................................................... 2 3. Commissioning................................................. 3 - 20 3.1 - Preparation.............................................................. 4 3.2 - Unpacking................................................................ 4 3.3 - Pack contents.......................................................... 4 - 5 3.4 - Adding the toestraps ................................................ 6 - 7 3.5 - Adding the toestrap elastic ...................................... 7 3.6 - Adding the rope handles .......................................... 8 3.7 - Adding the rear strop ............................................... 9 3.8 - Adding the bung ....................................................... 9 3.9 - Adding the righting lines .......................................... 10 3.10 - Adding ther painter ................................................ 10 3.11 - Rigging the mast .................................................... 11 - 12 3.12 - Stepping the mast .................................................. 12 3.13 - Rigging the boom ................................................... 13 - 17 3.14 - Rudder and daggerboard ...................................... 18 - 20 4. Sailing hints........................................................... 21 - 26 4.1 - Introduction..............................................................
    [Show full text]
  • STANDARD SAIL and EQUIPMENT SPECIFICATIONS (Updated October, 2016)
    STANDARD SAIL AND EQUIPMENT SPECIFICATIONS (Updated October, 2016) 1. Headsails, distinctions between jibs and spinnakers A. A headsail is defined as a sail in the fore triangle. It can be either a spinnaker, asymmetrical spinnaker or a jib. B. Distinction between spinnakers and jibs. A sail shall not be measured as a spinnaker unless the midgirth is 75% or more of the foot length and the sail is symmetrical about a line joining the head to the center of the foot. No jib may have a midgirth measured between the midpoints of luff and leech more than 50% of the foot length. Headsails with mid-girths, as cut, between 50% and 75% shall be handicapped on an individual basis. C. Asymmetrical spinnakers shall conform to the requirements of these specifications. 2. Definitions of jibs A. A jib is defined as any sail, other than a spinnaker that is to be set in the fore triangle. In any jib the midgirth, measured between the midpoints of the luff and leech shall not exceed 50% of the foot length nor shall the length of any intermediate girth exceed a value similarly proportionate to its distance from the head of the sail. B. A sailboat may use a luff groove device provided that such luff groove device is of constant section throughout its length and is either essentially circular in section or is free to rotate without restraint. C. Jibs may be sheeted from only one point on the sail except in the process of reefing. Thus quadrilateral or similar sails in which the sailcloth does not extend to the cringle at each corner are excluded.
    [Show full text]
  • A Reference for Rigging, Storing, and Troubleshooting RS Quests
    Questland A Reference for Rigging, Storing, and Troubleshooting RS Quests Developed by Benjamin Geffken Last Updated: July 1, 2018 2 Table of Contents Rigging 4 Sails 5 Jib 5 Spinnaker 5 Attaching the Tackline (1 of 2) 6 Check Spin Halyard goes up to Port of Everything, comes down to Starboard 8 Attaching the Head of the Spinnaker (1 of 2) 9 Locating the Downhaul 11 Leading the Downhaul through the Bow Opening 12 Leading the Downhaul up through the Silver Ring 13 Leading the Downhaul up to the Canvas X 14 Tying the Downhaul to the Canvas X 15 Attaching the Spin Sheets to the Clew - Luggage Tag 16 Leading a Spin Sheet through its Block 18 Tying the Spin Sheets Together - Water Knot (1 of 4) 19 Rigged Spinnaker 24 Mainsail 25 Steps of Reefing 25 Rigging the Tack Strap 26 Rigged Outhaul 27 Rigged Cunningham 28 Tying a Bobble Knot (1 of 2) 29 Line Control 31 Rigged Reefing Outhaul (1 of 2) 32 Starboard View of Reefed Quest 34 Port View of Reefed Quest 35 Blades 35 Centerboard 36 Rudder 36 3 Derigging 37 Sails 37 Jib 37 Spinnaker 38 Mainsail 38 Rolling the Mainsail (1 of 2) 39 Attaching the Jib Sock 41 Blades 42 Storage 43 Charlestown 44 Jamaica Pond 45 Quest-specific Quirks 46 Roller Furler 47 Gnav 47 Beam Drainage Hole 49 Rudder Safety Release 50 Popping a Rudder Back into Place (1 of 2) 50 The Three Rudder Positions: Sailing, Beaching, Beached 52 Maintenance 53 Forestay Tension Clip - Self-Destructive (1 of 2) 54 Solution 55 The Rig Tension Problem 56 Current Compromise 56 Taping the Forestay Swivel 57 Caulked Seam near Spinnaker Sleeve on Bow 58 Using the Drop Nose Pins 59 Controlling the Extension of the Bowsprit 60 Distance between the Base of the Bowsprit and the Hull 61 Fusing the Lines 62 Adding Rudder Safety Lines 63 Masthead Floats 64 Bent Reefing Tack-Hook Pins 65 Notes on Maintenance 66 4 Rigging 5 Sails Jib Jibs are normally left furled around the forestay, covered by a jib sock.
    [Show full text]
  • Part 19 Mizzen Topsail
    Part 19 Part 19, similar to part 18, we will be moving up the masts to the next level to install and rig the Topmast yards and sails. When building the masts, I had put the long pole on the top of the mizzen mast and had just assumed that I would be installing a mizzen topgallant, but this was not to be. So the mizzen topsail is as high as I go. You will see in some of the pictures I rigged a mizzen topgallant fore stay to “fill” the space. As before, I re-sequenced the steps to merge the rigging of the sails with the basic rigging. This chapter goes hand in hand with chapter 23 to marry the yards and sails together. I have included the sequencing for the topsails below. (Most of the photos in this chapter were taken after the fact and not during the assembly work) Mizzen Topsail Atalanta Mizzen Topsail Installation Sequence 1770’s (Period 1760 – 1800) 19.1 Make Topsail yard Sling cleat Stop cleat 19.2 Yard horses and stirrups (4) 19.3 Yard sheet blocks (2) 19.4 Yard clueline blocks (2) 19.5 Yard brace pendants (2) 19.8 Yard lift blocks (2) 23.1 Sew Sail Reef Points Bend sail – (carp. glue 60/40 solution) Lace Sail to yard 19.7 Yard tye and halliards 19.9 Yard lifts 19.10 braces 19.11 Vangs 23.16 sail cluelines (2) 23.17 sail buntlines (2) 23.18 sail bowlines and bridles(2) 23.19 sail sheets (2) XX Bend sail (2nd time) At this point all tackle; sail and sail rigging are attached to the yard and ready to install.
    [Show full text]
  • Kate Cory Instruction Book
    Kate Cory_instructions.qxd 1/10/07 12:20 PM Page 1 INSTRUCTION MANUAL MODELING THE KATE CORY ! WHALING BRIG, 1856 ! Technical Characteristics Scale: 3/16" = 1 ft. Overall Length: 23-5/8"; Hull Length: 15-1/4" Width: 9-1/4" (width of fore lower yard, 13" with studding sails); Hull Beam: 4" Height: 19" (top of main mast to bottom of keel) Instructions prepared by Ben Lankford ©2007, Model Shipways, Inc. Manufactured by Model Shipways, Inc. • Hollywood, Florida Sold by Model Expo, a division of Model Shipways, Inc. • www.modelexpo-online.com Model Shipways Kit No. MS2031 Kate Cory_instructions.qxd 1/10/07 12:20 PM Page 2 HISTORYHISTORY Throughout the middle of the 19th century, activities in the Atlantic whale fishery were carried out in small fore-and-aft schooners and brigs. The latter are hermaphrodite brigs, or “half-brigs”, or simply “brigs” to use the jargon of laconic whalemen. Kate Cory was built in 1856 by Frank Sisson and Eli Allen in Westport Point, Massachusetts for Alexander H. Cory, one of the lead- ing merchants of that community. The ship was named after Alexander’s daughter. Registered at 132 tons net, Kate Cory was 75' 6" in length between perpendiculars, 9' 1-1/2" depth, and had a beam of 22' 1". The last large vessel to be built within the difficult confines of that port, she was also one of the last small whalers to be built specifically for her trade; most of the later whaling brigs and schooners were converted freighters or fishermen. While originally rigged as a schooner, Kate Cory was converted to a brig in 1858, this rig affording steadier motion in heavy seas or while cutting-in whales, not to mention saving much wear and costly repair to spars, sails and rigging.
    [Show full text]
  • Types of Rigs
    Types of Rigs Rigs and Rigging Sloop Ketch Yawl Gaff Cutter Schooner Toronto Brigantine Topsail Schooner Brig Brigantine Barque Barquentine Fully Rigged Ship 1 2 Gaff Rig vs Marconi (Bermuda) Rig Sloop • One mast • Fore and aft rigged • One head sail • This is the most commonly seen rig Bermuda rigged sail Gaff rigged sail these days Spray – sailed around the world in -Sail only has one halyard -Sail has a peak and a throat halyard 1895 by Joshua Slocum, who wrote - Less sail area -Greater sail area for same height “Sailing Alone Around the World” - Easier to set -Requires more people to set 3 4 Cutter Schooner • One mast • Two or more masts • Fore and aft rigged • Rigged Fore and Aft • Forward mast is shorter or • More than one headsail, usually with a equal to after mast(s) headrig as well • Can be gaff rigged – Bluenose • Can be Bermuda rig – Challenge • Grand Banks Fishing Schooner Bluenose II maiden voyage 1963 Maurice Crosby 5 6 Topsail Schooner Ketch • Two or more masts • Two masts • Gaff rigged sails on all • Fore and aft rigged lower masts, square sails on some masts • Mizzen mast forward of • A version with raked masts, the rudder post (mizzen called the Baltimore provides some drive) Clipper, was much favoured by privateersmen • Aft mast is shorter than in the War of 1812 (Pride of the forward mast Baltimore II) (compare to Schooner) Ketch in Stormy Weather V. Howes 1896 http://www.pride2.org/history/index.php 7 8 Yawl Barque • Two masts • Three or more • Fore and Aft rigged masts • Mizzen mast aft of the • All masts except
    [Show full text]
  • May 2002 Knot of the Month Wall Knot Parts of the Ship Strands Tuck up Instead of Down
    May 2002 Knot of the month Wall Knot Parts of the ship Strands tuck up instead of down. This Square sail is the converse of the crown that you all learned during your basic course. The Head crown is used to start a back splice. Earring ring These two knots, used in various com- binations are used in many knots Cringle Manrope Knot Leech Clew Manrope knots were formerly tied in the ends of elaborate manropes, which were Foot often coach whipped, painted, fringed, tasseled, decorated with Turk’s heads. A course sail has a Clew spectacle, They were hung from stanchions in the which has three thimbles, cast in a sin- rails and provided a handhold for visi- gle mould so that three ropes can be tors coming onboard. They were nor- First a wall, then a crown; hooked into it to lead in different direc- mally tied in four-strand rope now im- Now tuck up, then tuck down. tions. E.g. Tack; Sheet; Clew garnet. possible to get. James Craig Crew News What becomes of women who go to sea . Compiled by The Naval Chronicle 1807 (Contempo- this way, and dresses like a man; and is Peter Davey rary record of the Royal Navy at War) ; so hardy at a very advanced age, that Production and photos by At the Public Office, Queens square, she never catches cold. John Spiers an old woman, generally known by the #Chatham Chest. It paid compensa- name of Tom Bowling, was lately tion for wounds and injuries sustained Cover artwork by brought before the magistrate, for sleep- in action or on duty, and pensions for Sean Douglas ing all night in the street; was commit- permanent disablement to warrant offic- ted as a rogue and a vagabond, and ers, ratings and dockyard workers.
    [Show full text]