Helios-Preisser Price List 2017/2018

Total Page:16

File Type:pdf, Size:1020Kb

Helios-Preisser Price List 2017/2018 HELIOS-PREISSER PRICE LIST 2017/2018 Listprice Excess Certifi- Chapter Notice Item Code valid from Description length / cate 01.07.2017 weight 1 0003219 7,40 € Wooden case 250 x 90 x 20 mm for 160 mm 1 0003220 8,80 € Wooden case 315 x 145 x 20 mm for 200 mm 1 0003221 11,10 € Wooden case 370 x 145 x 20 mm for 250 mm 1 0003222 15,40 € Wooden case 435 x 175 x 20 mm for 300 mm 1 0003223 17,20 € Wooden case 435 x 205 x 20 mm for 300 mm 1 0003224 25,90 € Wooden case 610 x 180 x 20 mm for 400 mm 1 0003225 33,70 € Wooden case 590 x 220 x 20 mm for 400 mm 1 0003226 40,20 € Wooden case 590 x 250 x 20 mm for 400 mm 1 0003227 36,80 € Wooden case 590 x 300 x 20 mm for 400 mm 1 0003228 44,80 € Wooden case 690 x 200 x 20 mm for 500 mm 1 0003229 46,00 € Wooden case 690 x 250 x 25 mm for 500 mm 1 0003230 47,20 € Wooden case 700 x 315 x 25 mm for 500 mm 1 0003231 48,20 € Wooden case 700 x 350 x 25 mm for 500 mm 1 0003232 48,20 € Wooden case 790 x 200 x 25 mm for 600 mm 1 0003233 58,00 € Wooden case 790 x 250 x 25 mm for 600 mm 1 0003234 64,00 € Wooden case 790 x 315 x 21 mm for 600 mm 1 0003235 70,00 € Wooden case 810 x 400 x 25 mm for 600 mm 1 0003236 59,00 € Wooden case 1000 x 220 x 25 mm for 800 mm 1 0003237 63,00 € Wooden case 1000 x 270 x 25 mm for 800 mm 1 0003238 64,00 € Wooden case 1000 x 320 x 21 mm for 800 mm 1 0003239 72,00 € Wooden case 1000 x 380 x 25 mm for 800 mm 1 0003240 83,00 € Wooden case 1000 x 420 x 25 mm for 800 mm 1 0003241 83,00 € Wooden case 1100 x 480 x 25 mm for 800 mm 1 0003242 79,00 € Wooden case 1200 x 220 x 25 mm for 1000 mm 1 0003243 84,00 € Wooden case 1250 x 270 x 25 mm for 1000 mm 1 0003244 95,00 € Wooden case 1200 x 320 x 21 mm for 1000 mm 1 0003245 105,00 € Wooden case 1200 x 380 x 25 mm for 1000 mm 1 0003246 113,00 € Wooden case 1230 x 420 x 21 mm for 1000 mm 1 0003247 130,00 € Wooden case 1300 x 600 x 25 mm for 1000 mm 1 0003248 110,00 € Wooden case 1520 x 310 x 25 mm for 1250 mm 1 0003249 110,00 € Wooden case 1520 x 380 x 25 mm for 1250 mm 1 0003250 140,00 € Wooden case 1520 x 440 x 25 mm for 1250 mm 1 0003251 146,00 € Wooden case 1800 x 310 x 25 mm for 1500 mm 1 0003252 158,00 € Wooden case 1800 x 380 x 25 mm for 1500 mm 1 0003253 188,00 € Wooden case 1800 x 440 x 25 mm for 1500 mm 1 0003254 245,00 € Wooden case 2300 x 310 x 25 mm for 2000 mm 1 0003255 289,00 € Wooden case 2300 x 380 x 25 mm for 2000 mm 1 0003256 273,00 € Wooden case 2300 x 460 x 25 mm for 2000 mm 1 0003257 294,00 € Wooden case 3310 x 310 x 25 mm for 3000 mm 1 0003258 305,00 € Wooden case 3310 x 400 x 25 mm for 3000 mm 1 0003259 353,00 € Wooden case 3310 x 460 x 25 mm for 3000 mm 5 0003280 4,10 € Wooden case for squares w./wo. base 50 x 40 mm 5 0003281 4,50 € Wooden case for squares w./wo. base 75 x 50 mm 5 0003282 4,70 € Wooden case for squares w./wo. base 100 x 70 mm 5 0003283 5,90 € Wooden case for squares wo. base 150 x 100 mm 5 0003284 6,50 € Wooden case for squares w. base 150 x 100 mm 5 0003285 7,40 € Wooden case for squares wo. base 200 x 130 mm 5 0003286 8,60 € Wooden case for squares w. base 200 x 130 mm 5 0003287 8,20 € Wooden case for squares wo. base 250 x 165 mm Price list valid from 01.07.2017 - previous price lists lose their validity with this list. All prices are recommended retail prices and exclude Value Added Tax. All data are without guarantee and subject to change. 1 HELIOS-PREISSER PRICE LIST 2017/2018 Listprice Excess Certifi- Chapter Notice Item Code valid from Description length / cate 01.07.2017 weight 5 0003288 18,50 € Wooden case for squares w. base 250 x 165 mm 5 0003289 11,10 € Wooden case for squares wo. base w. foam plast. 300 x 200 mm 5 0003290 18,50 € Wooden case for squares w. base 300 x 200 mm 5 0003291 32,00 € Wooden case for squares wo. base 400 x 265 mm 5 0003292 35,30 € Wooden case for squares w. base 400 x 265 mm 5 0003293 35,60 € Wooden case for squares wo. base 500 x 330 mm 5 0003294 39,80 € Wooden case for squares w. base 500 x 330 mm 1 0145110 164,00 € Accessory kit for digital caliper 1 0180310 4,20 € Tyre profile depth gauge, hard brass 30 mm 1 0180320 6,80 € Pocket caliper hard brass w. nonius 100 x 25 mm 1 0180330 6,80 € Pocket caliper hard brass w. nonius 100 x 20 mm 1 0182501 33,20 € Pocket vernier caliper lefth. ss 1/20mm+1/128“ 150x40mm 1 0184501 25,00 € Pocket vernier caliper ss chr 1/20mm+1/128“ 150x40mm 1 0184505 33,00 € Pocket vernier caliper ss chr 1/20mm+1/128“ 200x40mm 1 0184508 49,00 € Pocket vernier caliper ss chr 1/20mm+1/128“ 300x50mm 1 0185500 19,50 € Pocket vernier caliper ss chr 1/20mm+1/128“ 100x40mm 1 0185501 25,00 € Pocket vernier caliper ss chr 1/20mm+1/128“ 150x40mm 1 0185505 33,00 € Pocket vernier caliper ss chr 1/20mm+1/128“ 200x40mm 1 0185508 49,00 € Pocket vernier caliper ss chr 1/20mm+1/128“ 300x40mm 1 0188501 22,00 € Pocket vernier caliper ss chr 1/20mm+1/128“ 150x40mm 1 0189501 22,00 € Pocket vernier caliper ss chr 1/20mm+1/128“ 150x40mm 1 0190501 26,00 € Pocket vernier caliper „Duo-Fix“ 1/20mm+1/128“ 150x40mm 1 0194501 26,00 € Pocket vernier caliper ss chr 1/20+1/128“ 150x40mm 1 0195501 26,00 € Pocket vernier caliper ss chr 1/20+1/128“ 150x40mm 1 NEW 0197501 32,00 € Pocket vernier caliper „SOFT-SLIDE“ 1/20mm+1/128“ 150x40mm 1 NEW 0197505 75,00 € Pocket vernier caliper „SOFT-SLIDE“ 1/20mm+1/128“ 200x50mm 1 NEW 0197508 149,00 € Pocket vernier caliper „SOFT-SLIDE“ 1/20mm+1/128“ 300x60mm 1 0198501 29,50 € Pocket vernier caliper ss „4-way“ paral. 1/20 150x40mm 1 0199501 29,50 € Pocket vernier caliper ss „4-way“ paral. 1/20 150x40mm 1 0203501 49,50 € Pocket vernier caliper ss chr paral. VG 1/20-1/128,150x40mm 1 0212520 128,00 € Tool set, 8 p. „Duo-Fix“ pckt. ver. cal. 150mm, rect. 1 0212522 187,00 € Tool set, 8 p. „Digi-Met“ pckt. ver. cal. 150mm, rnd. 1 0212524 187,00 € Tool set, 8 p. „Digi-Met“ pckt. ver. cal. 150mm, rect. 1 0212526 213,00 € Tool set, 8 p. „Digi-Met“ pckt. ver. cal. IP67 150mm, rnd. 1 0212528 213,00 € Tool set, 8 p. „Digi-Met“ pckt. ver. cal. IP67 150mm, rect. 1 0216521 352,00 € Dial caliper 1/20 150x40mm, cross points 40mm 1 0217501 65,00 € Dial caliper ss chr. one-point-revo. =2mm 1/50 150x40mm yes 1 0217502 131,00 € Dial caliper ss chr. one-point-revo. =2mm 1/50 200x40mm yes 1 0218501 87,00 € Dial caliper ss chr. one-point-revo. =1mm 1/50 150x40mm yes 1 0219503 288,00 € Dial workshop caliper ss chr 1/20 300x90mm yes 2 0220204 3,20 € Battery 1.5V, type 357 1 0220704 3,70 € Battery for DIGI-MET items CR2032 3V Lithium 1 0220705 21,50 € Attachement base to caliper no. 0220... bridge length 75mm 1 0222734 2.569,00 € Dig. workshop caliper ss w. kni-po. wo. fa 1/100 1500x200mm yes 1 0222736 3.083,00 € Dig. workshop caliper ss w. kni-po. wo. fa 1/100 2000x200mm yes 1 0223734 2.741,00 € Dig. workshop caliper ss w. kni-po. w. fa 1/100 1500x200mm yes 1 0223736 3.176,00 € Dig. workshop caliper ss w. kni-po. w. fa 1/100 2000x200mm yes 1 0224734 2.323,00 € Dig. workshop caliper ss wo. kni-po. wo. fa 1/100 1500x200mm yes 1 0224736 2.816,00 € Dig. workshop caliper ss wo. kni-po. wo. fa 1/100 2000x200mm yes Price list valid from 01.07.2017 - previous price lists lose their validity with this list. All prices are recommended retail prices and 2 exclude Value Added Tax. All data are without guarantee and subject to change. HELIOS-PREISSER PRICE LIST 2017/2018 Listprice Excess Certifi- Chapter Notice Item Code valid from Description length / cate 01.07.2017 weight 1 0225734 2.449,00 € Dig. workshop caliper ss wo. kni-po. w. fa 1/100 1500x200mm yes 1 0225736 2.907,00 € Dig.
Recommended publications
  • Methods to Check Dimensional Tolerances on Hollow Structural Sections
    HSS METHODS TO CHECK DIMENSIONAL TOLERANCES ON HOLLOW STRUCTURAL SECTIONS HSS: TECHNICAL BROCHURE TABLE OF CONTENTS FOREWARD 1-2 Outside Dimensions The following is published as a guide 3-4 Wall Thickness for the purchaser of hollow structural 5 Length and Straightness sections (HSS). Methods of checking dimensional tolerances, stipulated 6 Squareness of Sides in Section 11 of ASTM A500-20,* are 7-8 Corner Radius discussed in detail. When checking tolerances for ASTM A847, ASTM 9-10 Twist A1085, ASTM A1065 or other material, 11 STI Member Producers the permissible variations may differ from what is given here; however, the method of measurement is the same. All excerpts from ASTM A500 are formatted For additional information, please with a gray background as seen here. contact the HSS manufacturer or the Steel Tube Institute. *Excerpts from ASTM A500 reprinted with permission from ASTM A500/A500M-20, copyright ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428. A copy of the complete standard can be obtained from ASTM International at www.astm.org. Steel Tube Institute Methods to Check Dimensional Tolerances on Hollow Structural Sections steeltubeinstitute.org Version: 11/20 OUTSIDE DIMENSIONS MEASURING ROUND TUBING 11. PERMISSIBLE VARIATIONS IN DIMENSIONS METHOD 11.1 Outside Dimensions: 11.1.1 Round Structural Tubing—The outside diameter shall not Refer to Example 1 for a typical application. vary more than ±0.5 %, rounded to the nearest 0.005 in. [0.1 1 Measure at a position at least 2 inches from either end mm], from the specified outside diameter for specified outside of the HSS.
    [Show full text]
  • MEASURING and MARKING Tools
    Measuring & Marking Measuring & Marking OUTLETS NATIONWIDE 522 Measuring & Marking Solutions for every aspect of measuring and marking for professionals in any business. All products are accurate to international specifications and carry our comprehensive warranty and lifetime replacement policy. 524-527 527 528-530 530-534 534-536 Tapes & Rules Measuring Wheels Squares & Bevels Measuring Gauges Dial Indicators & Stands 536 536-544 545-547 547-548 549 Counters Micrometers Verniers Calipers, Dividers & Scribers Compasses 550 551 551-553 553 554 Specialised Marking Tools Chalks, Crayons & Pencils Chalklines & Refills Marking Gauges Stencils 554-555 556 Levels Surveyors Tools Measuring & Marking AVAILABLE FROM SELECTED 523 Quick Find Index DISTRIBUTORS NATIONWIDE POWER TAPE - SOFT GRIP WITH AUTOLOCK MEASURING TAPE - RUBBER ! Magnetic hook ! Top stop secures tape in place ! Non-slip grip rubber case is robust and impact resistant ! Clearly marked blade with ! Automatic blade lock (BLADE LOCKS ITSELF WHEN PULLED OUT) metric graduations ! ! Push button retrieval Extra tough impact resistant ABS case with sure-grip ! Chrome belt clip rubber shroud ! Power return blade glides back into case automatically with smooth rewind action Code Size MTS4800 3m x 16mm Code Size MTS4805 5m x 19mm RIC4167 3m x 13mm MTS4810 7.5m x 25mm RIC4170 5m x 19mm MTS4815 10m x 25mm RIC4180 7.5m x 25mm TAPE - SHOX MEASURING TAPE - ABS ! Positive brake action locks ! Expert quality, finely engineered tapes blade solidly in hand are renowned for reliability ! Sliding end
    [Show full text]
  • Vernier Scale - Wikipedia, the Free Encyclopedia
    Vernier scale - Wikipedia, the free encyclopedia http://en.wikipedia.org/wiki/Vernier Your continued donations keep Wikipedia running! Vernier scale From Wikipedia, the free encyclopedia (Redirected from Vernier) For the spacecraft component, see Vernier thruster. A vernier scale lets one read more precisely from an evenly divided A set of vernier calipers. straight or circular measurement scale. It is fitted with a sliding secondary scale that is used to indicate where the measurement lies when it is in-between two of the marks on the main scale. It was invented in its modern form in 1631 by the French mathematician Augustus Vernier (1580–1637). In some languages, this device is called a nonius, which is the Latin name of the Portuguese astronomer and mathematician Pedro Nunes (1492–1578) who invented the principle. Another theory is that this name is from the Latin "nona" meaning "9" and therefore "nonius" means a "ninth" of the main scale. (Note - Wiki contains an entry for Pierre Vernier, but not Augustus Vernier - also, many sources list his birth and death dates as 1584 and 1638 - There may be an error in the current entry). Verniers are common on sextants used in navigation, scientific instruments and machinists' measuring tools (all sorts, but especially calipers and micrometers) and on theodolites used in surveying. When a measurement is taken by mechanical means using one of the above mentioned instruments, the measure is read off a finely marked data scale (the "fixed" scale, in the diagram). The measure taken will usually be between two of the smallest gradations on this scale.
    [Show full text]
  • Angle Finders and Levels
    Order Toll Free at 1-877-826-7268 · 8:00 am–5:00 pm CST · Monday–Friday 24 Hour Fax at 641-628-2614 · Order online at www.Trick-Tools.com Angle Finders and Levels 2 – 4 ANGLE FINDERS & LEVELS Digital Levels · Dial Levels · Bend Protractors · Angle Finders · Plane-Of-Bend Indicators · Digital Angle Gauge Torpedo Levels · Digital Protractors · Fractional Calipers Wixey Digital Angle Finder/Level is a handy tool for finding true bevel angles on a saw, tracking rotation of a tube during tube bending (with optional base), or setting 5 – 8 up milling/drilling operations. The gauge can be "zeroed" at any point. The small SAWS body is only 2" x 2" and has a strong magnetic base. Each Wixey gauge comes with an Circular Cold Saws · Portable Metal Cutting Saws · Horizontal Band Saws · Mag Brush · additional battery for extra long usage. You will find a lot of applications for this gauge! Mitering Band Saws · Vertical Band Saws · TCT Chop Saws The optional base will attach to round tubing or pipe that is 1" through 2" OD. The base 9 – 10 GRINDING & SANDING also swivels independently of the gauge, so you can use it as a level. Belt Grinders · Combination Belt & Disc Grinders · Deburring Machines · WR300 Digital Angle Gauge...............................................................................$39.99 Bench Grinders · Disc Grinders · Knife Making Machines Digital Angle Gauge and Bracket Combo...................................................................$99.98 11 – 12 WELDING ACCESSORIES Angle Gauge Bracket Only (attaches to 1"–2" round tube)..................................................$59.99 Variable Angle Clamps · Fixed Angle Clamps · Tab and Bracket Holders · Rotary Welding Positioners · Fixturing Tables Digital Level 13 – 18 METAL SHAPING No shop should be without this handy digital level.
    [Show full text]
  • Iso 9013:2002(E)
    INTERNATIONAL ISO STANDARD 9013 Second edition 2002-09-15 Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances Coupage thermique — Classification des coupes thermiques — Spécification géométrique des produits et tolérances relatives à la qualité Reference number ISO 9013:2002(E) © ISO 2009 - This is a single-user license for personal use only. All other uses prohibited. © ISO 2002 ISO 9013:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. © ISO 2002 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester.
    [Show full text]
  • Catalog of Online Training a Modern Learning Experience for the Technical Workforce
    Catalog of Online Training A Modern Learning Experience for the Technical Workforce GPiLEARN+ Catalog 2021 1 Hundreds of technical companies worldwide are using GPiLEARN+™ to optimize workforce performance. Benefits of GPiLEARN+ Do your employees have the knowledge, skills, and abilities required to operate and maintain equipment safely and efficiently? GP Strategies® has been helping companies solve workforce qualification and regulatory compliance challenges for over 50 years. GPiLEARN+ is an industry leading online training solution that can be fully implemented for your organization in just a few weeks, allowing you to achieve an ultra-fast time to value where you see immediate results. With GPiLEARN+, you can easily implement blended learning solutions that makes a lasting impact on your engineers, technicians, operators, and other skilled workers. From managing health, safety & environmental programs to complex position-based qualifications, GPiLEARN+ is the solution you need to maintain a safe and effective technical workforce! Rely on GPiLEARN+ to optimize your workforce performance Simplified Flexible Efficient Learner Experience Platform Technology Administration • Intuitive User Interface • Business Intelligence to • Flexible Learning Paths Visualize Analytics and Job Roles • Interactive, On-Demand Courseware • Customizable Login Page • Ad Hoc Reporting and Branded Site • Course Reminders • Schedule and Track and Notifications • Single Sign-On (SSO) Classroom Courses Implementations • Collaborative and • Easily Import Content
    [Show full text]
  • PERFORMANCE TOOL® — Calipers
    MIT/2825 MITUTOYO — Gauges/Rulers ge STANDARD WIRE GAUGE – PROTRACTOR – SERIES 968 SERIES 950 %DVHJXODU%DVH3URWUDFWRU¶VVFDOHSODWHDQGLQGLFDWRUEODGH tora 0DGHRIKLJKTXDOLW\VWHHO DUHPDGHHQWLUHO\RIVWDLQOHVVVWHHO S 6DWLQFKURPH¿QLVK 6DWLQFKURPH¿QLVK:LWK´DUP 6L]H*DXJH5DQJH± 6HPLFLUFOH $PHULFDQVWDQGDUG Part No. 968-202. Part No. 950-202. Equipment / Tool Tool DIGITAL PROTRACTOR – SERIES 950 RADIUS GAUGES – SERIES 186 25 PIECE RADIUS GAUGE SET –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¿[WXUHV'LVSOD\UHPDLQVXSULJKWWRYLHZDWDOO YHULI\UDGLXVRU¿OOHWGLPHQVLRQVHDVLHUIDVWHU DQJOHV 56&RXWSXW DQGPRUHDFFXUDWHO\LQPDFKLQLQJOD\RXW 6XSSOLHGLQ¿WWHGFDUU\LQJFDVH 186-102 LQVSHFWLRQDQGSDWWHUQPDNLQJZRUN7KH 950-317 PHDVXULQJVXUIDFHVDUHSUHFLVHO\¿QLVKHG ZLWKVPRRWKDFFXUDWHHGJHV(DFK5DGLXV s Model Pro 360 Model Pro 3600 l Technical Data Part No. 950-317. Part No. 950-318. *DXJHKDV¿YHPHDVXULQJORFDWLRQVDQGLWLV LGHQWL¿HGZLWKLWVSDUWLFXODUUDGLXVGLPHQVLRQV oo 5DQJH [ 186-105 T 7KHJDXJHVKDYHDVDWLQRUGXOOFKURPH¿QLVK d WR n 5HVROXWLRQ WR Composition of 7KHKROGLQJFDVHLVSURYLGHGWRSURWHFWWKH
    [Show full text]
  • Zile 500 Series with Set Andand Forgetforget Technology SELECT and Optional Output for SPC
    TOOLS & PRECISION INSTRUMENTS CALIPERS Dial Caliper Digimatic Calipers Mitutoyo Zile 500 Series with Set andand ForgetForget Technology SELECT and Optional Output for SPC •s Adjustable zero position •s Double shock proof design •s Premium hardened stainless steel •s Full one year warranty •s Includes fitted case •s WorldsWorld's firstfirst absoluteabsolute type electronic caliper Item Pack No. Description Range Qty. •s Datum point remains in memory until replacement of battery YPI-11 6" Dial Caliper in Fitted Case 0-6 1 (approx. 20,000 hrs.), thus eliminating over-speed errors •s Origin setting, zero setting, data output Dial Calipers Mitutoyo •s Optional data hold unit and SPC cable with data switch 505 Series •s Warnings for battery replacement and soiled scale Inch and Metric •s Resolution to .0005" (0.01mm) •s Accuracy is ±.001 inch/metric Item Pack No. Range (inch)(Inch) Range (mm) SPC Qty. MI-500-195 0-4 0-100 No-Output 1 MI-500-170 0-4 0-100 SPC Data-Output 1 MI-500-171 0-6 0-150 SPC Data-Output 1 MI-500-196 0-6 0-150 No-Output 1 •s Stainless steel MI-500-197 0-8 0-200 No-Output 1 Thumb roller MI-500-172 0-8 0-200 SPC Data-Output 1 •s Thumb roller MI-500-193 0-12 0-300 No-Output 1 •s Supplied in fitted carrying case MI-905338 1 Meter ConnectingConnecting Cable 1 These dial calipers have been designed with a new dial Digimatic Calipers Mitutoyo movement to give an ultra smooth feel and to provide extra shock 500 Series protection for the gear train.
    [Show full text]
  • Gauges / Pin Gauges / Thread and Tolerance Tables C12.001.EN-Dealer.20110825
    Schut for Precision Gauges / Pin gauges / Thread and tolerance tables C12.001.EN-dealer.20110825 © 2011, Schut Geometrische Meettechniek bv 217 Measuring instruments and systems 2011/2012-D Schut.com Schut for Precision GAUGES Limit gauges for internal and external dimensions The manufacturing tolerance and the permissible reduction in wear for plain gauges are laid down in DIN 7162. New gauges are supplemented with a wear al­ lowance on the Go end: z (plus) for plug gauges Measuring reports and z1 (minus) for ring gauges. Accordingly, the size indicated on the handle is not similar to the For all gauges also measuring reports can be measured value of the new Go end. ordered. Example: plug gauge 30 H9 Inspection report (German) per gauge. Stating New Go end: of product specifications, measured values size 30.000 mm after production, used traceable measuring wear allowance (+ z) 0.009 mm devices, measuring inaccuracy and measuring 30.009 mm date. A favourable choice when your quality manufacturing tolerance ± 0.002 mm system does not require traceable (RvA) largest value measured 30.011 mm certificates. smallest value measured 30.007 mm Traceable RvA certificate (Dutch) with mea­ The gauges are also available without wear suring reports of the ordered gauges. Besides allowance (additional cost). This should be stating of the measured values the extra indicated when ordering. assurance of an external RvA inspection. Plug gauges Manufactured according DIN 2245, 2246 and 2247. Available from 0.5 to 250 mm; up to 70 mm with Go and NoGo on one handle, over 70 mm in two parts.
    [Show full text]
  • Everything Can Be Measured Measuring Tools for Professionals
    Everything can be measured Measuring Tools for Professionals Table of Contents 1. Workshop measurement .................................................. 6–87 Callipers .................................................................................................... 8–21 Micrometers ......................................................................................... 22–33 Dial gauges ......................................................................................... 34–57 Rules and squares ......................................................................... 58–87 2. Electrical testing instruments .......................... 88–105 3. Laser instruments ........................................................... 106–125 4. Climate- and environment tools .................... 126–141 5. Inspection instruments ............................................. 142–155 6. Scales .............................................................................................. 156–167 Warranty terms and conditions, service, repairs and contact ............................................ 168–169 Precision made easy “Words like approximate or difficult does not exist in our vocabulary. We go for accuracy and simplicity, straight down to the last decimal. Call us nerds if you want to – we just think it should be easy to get things right. Or precise, to be exact.” | 3 4 | Limit has more than 90 years of experience when it comes to supplying measuring instruments to Swedish industry. Right from the outset we have been dedicated to developing
    [Show full text]
  • I:Team-Hand Tools Ed22ed.Wpd
    Module Resource Manual SECOND EDITION Hand Tools MEC072 SAMPLE This second edition published in December 2002 by Manufacturing and Engineering Division Southern Sydney Institute, NSW TAFE Commission PO Box 218 Bankstown NSW 2200 This work is copyright. Any inquiries about the use of this material should be directed to the publisher. © New South Wales Technical and Further Education Commission 1998 National Library of Australia pub’n no: ISBN 0 7348 1127 6 HAND TOOLS MEC072 CONTENTS SAMPLE Introduction 3 Module sections 7 Section 1: Measuring 7 Section 2: Marking out and making a part 29 Section 3: Dismantling and assembling 67 Answers to review questions 85 MODULE SECTIONS Section 1: Measuring PURPOSE This section looks at common types of simple measuring tools and how to use them. In this section you will learn to identify various types of standard gauges and how to correctly use them to gauge engineering workpieces. You will also learn how to use a basic graduated measuring device such as a vernier caliper to measure engineering components and how to maintain, store and adjust the measuring device whilst maintaining safe workplace standards. Objectives At the end of this section you will be able to: ~ Compare features on components using standard gauges to an accuracy of ± 0.1 mm. ~ Measure components using graduated measuring devices. ~ Check, adjust and store graduated devices appropriately. ~ Maintain workplace safety standards at all times. SAMPLE Recommended resources Tools screw pitch gauge radius gauge feeler gauge thickness gauge form gauge depth gauge rules tapes vernier calipers Equipment 6 different sized and different pitched threads (3 metric and 3 imperial) 6 components with different sized gaps to be measured with feeler gauges 3 internal (concave) radii 3 external (convex) radii 60°, 55° and 47 ½° screw cutting tools 3 different gauged pieces of sheet metal components to measure with a rule.
    [Show full text]
  • Marking out Tools
    METALS AND FABRICATION PERFORM ENGINEERING MEASUREMENTS Learning Resource ENG1041 ENG1041 Perform engineering measurement Learning Resource Copyright and Terms of Use © Department of Training and Workforce Development 2016 (unless indicated otherwise, for example ‘Excluded Material’). The copyright material published in this product is subject to the Copyright Act 1968 (Cth), and is owned by the Department of Training and Workforce Development or, where indicated, by a party other than the Department of Training and Workforce Development. The Department of Training and Workforce Development supports and encourages use of its material for all legitimate purposes. Copyright material available in this product is licensed under a Creative Commons Attribution 4.0 (CC BY 4.0) license unless indicated otherwise (Excluded Material). Except in relation to Excluded Material this license allows you to: • Share — copy and redistribute the material in any medium or format • Adapt — remix, transform, and build upon the material for any purpose, even commercially provided you attribute the Department of Training and Workforce Development as the source of the copyright material. The Department of Training and Workforce Development requests attribution as: © Department of Training and Workforce Development (year of publication). Excluded Material not available under a Creative Commons license: 1. The Department of Training and Workforce Development logo, other logos and trademark protected material; and 2. Material owned by third parties that has been reproduced with permission. Permission will need to be obtained from third parties to re-use their material. 3. Materials reproduced in this resource under the AEShareNet licence. Excluded Material may not be licensed under a CC BY license and can only be used in accordance with the specific terms of use attached to that material or where permitted by the Copyright Act 1968 (Cth).
    [Show full text]